224 54,5 - psndealer.compsndealer.com/dealersite/images/newvehicles/2015/nv1011752_1.pdf · Multi-shell grab Double shell grab ... Slewing ring Strong ball race slewing ring, sealed

20 m

224 kW

54,5 tCrawler material handling machine

TIER IVf

Further developed. The E-Series.

Your most important advantages:

Green Effi ciencySave fuel - lower operating costsCalm work - easy on the operator and on the environment

Performance at the highest level Robust mechanical engineering - parts subject to load are optimized High speeds - high safe working loads

Maximum operating comfortMaxcab comfort cab - relaxed workSENCON - SENNEBOGEN Control System

Maximum safetySafe entry and exit - non-slip step surfaces Modern cameras - the entire work area is in view

Maintenance and service made easyEasy fault diagnosis - central measuring pointsEasy maintenance - clear markings

Consultation and support3 production locations - 2 subsidiaries120 Sales Partners - more than 300 service support points

elevated operator cab

The characteristics of the E-Series

60 years of experience in the design and construc-tion of hydraulic material handling machines

Uncompromising high-performance in all areas: Focus on material handling

Technology that can be mastered: High-quality components and avoidance of over-engineering

Long product service life and high value retention

Further developed. The E-Series.

Your most important advantages:

Green Effi ciencySave fuel - lower operating costsCalm work - easy on the operator and on the environment

Performance at the highest levelRobust mechanical engineering - parts subject to load are optimizedHigh speeds - high safe working loads

Maximum operating comfortMaxcab comfort cab - relaxed workSENCON - SENNEBOGEN Control System

Maximum safetySafe entry and exit - non-slip step surfacesModern cameras - the entire work area is in view

Maintenance and service made easyEasy fault diagnosis - central measuring pointsEasy maintenance - clear markings

Consultation and support3 production locations - 2 subsidiaries120 Sales Partners - more than 300 service support points

elevated operator cab

The characteristics of the E-Series

60 years of experience in the design and construc-tion of hydraulic material handling machines

Uncompromising high-performance in all areas:Focus on material handling

Technology that can be mastered: High-qualitycomponents and avoidance of over-engineering

Long product service life and high value retention

3*Up to 25% depending on work implementation as compared to the D-Series preliminary picture with mobile undercarriage 3*Up to 25% depending on work implementation as compared to the D-Series preliminary picture with mobile undercarriage

The E-Series. At a glance.

Constant, reliable performance due to large-dimensioned and highly-resistant fans and coolers

Water coolers and oil coolers with optimal effi ciency thanks to control via axial piston pump and motor thermostatic regulation on-demand

Charge air cooler with mechanical drive

Up to 20% savings: Working in Eco Mode with reduced speedIdle automation lowers RPM to 40% of working RPMStop automation switches the engine off , when there is no demand for powerOptimized engine settings, specifi c fuel consumption lowered, modern exhaust gas aftertreatment

Save fuel 4 times

Uniformly quiet working machine, thanks to decoupled engine suspension and acoustic insulationmats in the doors

Sound pressure level reduced by as much as 4.5 dB; sound power level in accordance with 2000/14/EC as much as 2 dB lower than required

The E-Series. At a glance.

Constant, reliable performance due to large-dimensioned and highly-resistant fans and coolersWater coolers and oil coolers with optimal effi ciencythanks to control via axial piston pump and motor thermostatic regulation on-demandCharge air cooler with mechanical drive

Up to 20% savings: Working in Eco Modewith reduced speedIdle automation lowers RPM to 40% ofworking RPMStop automation switches the engine off ,when there is no demand for powerOptimized engine settings, specifi c fuelconsumption lowered, modern exhaust gasaftertreatment

Save fuel 4 times

Uniformly quiet working machine, thanksto decoupled engine suspension and acousticinsulationmats in the doorsSound pressure level reduced by as much as 4.5 dB;sound power level in accordance with 2000/14/EC as much as 2 dB lower than required

5

Strong pumps with power reserves Highest levels of effi ciency thanks to large-dimensioned hydraulic valves and lines

Extremely long change intervals of 4,000 op.hrs through initial fi lling with HVLPD oil with extended oil service life when used with SENNEBOGEN HydroClean*

Standard equipment: Automatic, fast and strong fan reversal for blowing out the coolers and continuous cooling capacity

Side-by-side coolers, easily accessible and clean cooler technology

Fuel savings through optimized fan operation

Non-slip work surfaces Perimeter railing (optional) 2 cameras to the right and to the rear Step grid with railing sliding

door of the cab

Maximum safety

* Option, see page 7

preliminary picture with mobile undercarriage

5

Strong pumps with power reservesHighest levels of effi ciency thanks to large-dimensioned hydraulic valves and linesExtremely long change intervals of 4,000 op.hrsthrough initial fi lling with HVLPD oil with extended oilservice life when used with SENNEBOGEN HydroClean*

Standard equipment: Automatic, fast and strong fanreversal for blowing out the coolers and continuouscooling capacitySide-by-side coolers, easily accessible and cleancooler technologyFuel savings through optimized fan operation

Non-slip work surfaces Perimeter railing (optional) 2 cameras to the right and to the rear Step grid with railing sliding

door of the cab

Maximum safety

* Option, see page 7

preliminary picture with mobile undercarriage

The E-Series. Comfort pure.

Clear menu Determine actual values without additional measurement devices

Fast troubleshooting thanks to detailed messages

Work climate is always pleasant, thanks to 10 uniformly distributed fan nozzles

Easy control via central operating elements

Safety when entering and exiting the cab

Sliding door facilitates entering and exiting

Air-suspension comfort seat, with seat heater

Convenient joystick control, Hinged front window Sliding door, step grid in front of cab Color monitor for camera images to the right and to the rear

SENNEBOGEN Optimode:Diff erent modes for optimization of performance

Comfort cab Maxcab

The E-Series. Comfort pure.

Clear menuDetermine actual values withoutadditional measurement devicesFast troubleshooting thanks todetailed messages

Work climate is alwayspleasant, thanks to 10uniformly distributed fannozzlesEasy control via centraloperating elements

Safety when entering andexiting the cabSliding door facilitatesentering and exiting

Air-suspension comfort seat, withseat heaterConvenient joystick control,Hinged front windowSliding door, step grid in front of cabColor monitor for camera images tothe right and to the rearSENNEBOGEN Optimode:Diff erent modes for optimization ofperformance

Comfort cab Maxcab

7

Maintenance and service made easy

Optimal protection of hydraulic components thanks to 3 μm micro-fi lter

Cleaner hydraulic oil, extended oil service life

Easy access, central measuring points

Fast inspection of the entire hydraulic system

All parts are labeled with a unique part number

Easy and reliable spare parts ordering

Maintenance-optimized Fast and easy fault diagnostics through the eff ectively designed and clearly labeled electrical distributor

Easy accessibility to all service points of the machine

Automatic central lubrication for equipment and slewingring raceway

* optional 7

Maintenance and service made easy

Optimal protection ofhydraulic componentsthanks to 3 μm micro-fi lterCleaner hydraulic oil,extended oil service life

Easy access, centralmeasuring pointsFast inspection of the entirehydraulic system

All parts are labeled with aunique part numberEasy and reliable spare partsordering

Maintenance-optimizedFast and easy fault diagnosticsthrough the eff ectively designedand clearly labeled electricaldistributorEasy accessibility to all servicepoints of the machineAutomatic central lubricationfor equipment and slewingringraceway

* optional

2,5 mmax.4,5 m

Crawler SpecialMobil M* 4-point underframe

* Additional information on our mobile undercarriage is in the separate 835 M E-Series brochure

K16 K18 B18 K16 ULM B19 K20

Multi-shell grab

Double shell grab

Magnet plate

Scrap metal shears

E270 with Maxcab

E300/260 with Maxcab

Attachments Equipment (additional equipment on request)

Cab elevation Uppercarriage

Variants - undercarriage

Modular structure - versatile solutions

Diesel-hydraulic drive

Electro-hydraulic drive

Engine line drum

Transformer

Options

Magnetic generator

2,5 mmax.4,5 m

Crawler SpecialMobil M* 4-point underframe

* Additional information on our mobile undercarriage is in the separate 835 M E-Series brochure

K16 K18 B18 K16 ULM B19 K20

Multi-shell grab

Double shell grab

Magnet plate

Scrap metal shears

E270 with Maxcab

E300/260 with Maxcab

Attachments Equipment (additional equipment on request)

Cab elevation Uppercarriagee

Variants - undercarriage

Modular structure - versatile solutions

Diesel-hydraulic drive

Electro-hydraulic drive

Engine line drum

Transformer

Options

Magnetic generator

9* Option

thanks to railings*, grip handles and non-slip steps

Safe entry and exit

of recyclable sheet steel Robust side cover

due to the broad outrigger area

High stability

for fast work cycles and high-performance material handling

and safe working height, thanks

9* Option

thanks to railiand non-slip s

Safe entry a

t steeler

due to the brooutrigger area

High stabilit

h-ling

nks

SLEWING DRIVEGearbox Compact planetary gear with slant axis

hydraulic motor, integrated brake valves

Parking brake Spring-loaded disk brake

Slewing ring Strong ball race slewing ring, sealed

Slewing speed 0-8 RPM, stepless

UPPERCARRIAGEDesign Torsion-resistant box design, precision

crafted, steel bushings for boom bearing arrangementExtremely service-friendly concept, engine installed in the longitudinal direction

Central lubrication

Autom. central lubrication for equipment and slewing gear raceway

Electrical Central electrical distributor, battery disconnect switch

Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning

Options Slewing gear brake via foot pedal Perimeter uppercarriage railing for additional safety

Light package with LED Fire extinguisher Maritime climate paint fi nish as corrosion protection

Electrical hydraulic tank pre-warming at temperatures under -20°

Low-temperature package for work deployments at temperatures under -20°C

Hydraulically-driven magnetic generator 15 kW / 20 kW

HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic, pilot-controlled work functions, load limit sensing control

Pump type Variable-displacement piston pump in swashplate design, load pressure-independent fl ow distribution for simultaneous, independent control of work functions

Pump control Zero-stroke control, on-demand fl ow-control - the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control

Delivery rate maximum 740 l/minOperating pressure

to 350 bar

Filtration High-performance fi ltration with long-term change interval

Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of

work movements, 2 hydraulic servo joysticks for work functions, supplemental functions via switches and foot pedals

Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder

Options Bio-oil fi lling - ecologically worthwhile Tool Control for programming up to 10 tools in pressure / rate

Supplemental hydraulic circuit for shear attachment

Load moment warning with capacity utilization indicator, e.g. for tasks in halls

Overload safeguard with overload shut-down e.g. for tasks in halls

3 μm hydraulic micro-fi lter - SENNEBOGEN HydroClean

ENGINE224 kW / 304 hp at 2000 RPM

Model Cummins QSL 9-C300 TIER IVfDirect injection, turbo charged, charge air cooler, reduced emissions, ECO mode, idle automation, stop automation, fuel pre-warming

Cooling water-cooled, direction of rotation changeover of the cooler fan

Diesel fi lter with water separator and heater

Air fi lter Dry fi lter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator

Fuel tank 625 lElectr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch

Options Engine block pre-warming at temperatures under -20°C

Electric fuel pump

MACHINE TYPE835

Technical data - equipment

SLEWING DRIVEGearbox Compact planetary gear with slant axis

hydraulic motor, integrated brake valves

Parking brake Spring-loaded disk brake

Slewing ring Strong ball race slewing ring, sealed

Slewing speed 0-8 RPM, stepless

UPPERCARRIAGEDesign Torsion-resistant box design, precision

crafted, steel bushings for boom bearingarrangementExtremely service-friendly concept, engineinstalled in the longitudinal direction

Centrallubrication

Autom. central lubrication for equipment andslewing gear raceway

Electrical Central electrical distributor, battery disconnectswitch

Cooling system 3-circuit cooling system with high cooling output,thermostatically regulated fan drive for oil coolerand water cooler, fan reversal for cleaning

Options Slewing gear brake via foot pedalPerimeter uppercarriage railing foradditional safetyLight package with LEDFire extinguisherMaritime climate paint fi nish as corrosionprotectionElectrical hydraulic tank pre-warming attemperatures under -20°Low-temperature package for workdeployments at temperatures under -20°CHydraulically-driven magnetic generator15 kW / 20 kW

HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic, pilot-controlled work functions, load limit sensing control

Pump type Variable-displacement piston pump inswashplate design, load pressure-independentfl ow distribution for simultaneous,independent control of work functions

Pump control Zero-stroke control, on-demand fl ow-control- the pumps only pump as much oil as willactually be used, pressure purging, load limitsensing control

Delivery rate maximum 740 l/minOperatingpressure

to 350 bar

Filtration High-performance fi ltration with long-termchange interval

Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of

work movements, 2 hydraulic servo joysticks for work functions, supplemental functionsvia switches and foot pedals

Safety Hydraulic circuits with safety valves, securedemergency lowering of the equipment atengine standstill, pipe fracture safety valvesfor lift cylinder and stick cylinder

Options Bio-oil fi lling - ecologically worthwhileTool Control for programming up to 10 toolsin pressure / rateSupplemental hydraulic circuit for shearattachmentLoad moment warning with capacityutilization indicator, e.g. for tasks in hallsOverload safeguard with overload shut-downe.g. for tasks in halls3 μm hydraulic micro-fi lter - SENNEBOGENHydroClean

ENGINE224 kW / 304 hp at 2000 RPM

Model Cummins QSL 9-C300 TIER IVfDirect injection, turbo charged, charge air cooler,reduced emissions, ECO mode, idle automation,stop automation, fuel pre-warming

Cooling water-cooled, direction of rotation changeover of the cooler fan

Diesel fi lter with water separator and heater

Air fi lter Dry fi lter with integrated pre-separator,automatic dust discharge, main element andsafety element, contamination indicator

Fuel tank 625 lElectr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch

Options Engine block pre-warming at temperaturesunder -20°CElectric fuel pump

MACHINE TYPE835


11

ATTACHMENTSDesign Decades of experience, state-of-the-art

computer simulation, highest level stability, longest service life, large-dimensioned bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the grapple connections - open/close/rotate

Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points

Options Ball valves on the hydraulic lines grapple open, close, and rotate grapple

Kinematic position II for greater working depth

Maritime coating Maritime coating of all cylinders, nickel-plated and chrome-plated

Float position for equipment via hoist cylinder

Lift limitation / stick limitation adjustable for the stop settings, for example in the hall

SENNEBOGENCab type Hydraulically elevating cab E270

Cab equipment Sliding door, excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, fresh air fi lter / circulating air fi lter, joystick steering, 12 V / 24 V connections, SENCON

Options Cab E300/260 can be elevated 300 cm, and moved forward 260 mm hydraulically

Rigid cab elevation 1.00 m Auxiliary heating system with timer Cab active-charcoal fi lter inside air/outside air, ideal for waste recycling applications

Steering wheel steering with adjustable steering column

Sliding window in the operator door Armored glass windshield, additional safety Armored glass roof window, additional safety

Safety side window Floor window for a better view Sunblind for roof window Protective roof grating FOPS protective roof grating Front protective grating Radio and CD player with speakers Enlarged industrial cab with undivided armored glass windshield

UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in stable,

torsionally rigid box construction

Drive Hydraulic travel drive, integrated in the traveling gear frame for each traveling gear side through an axial piston motor via compact planetary gear.

Parking brake Spring-loaded, hydraulically ventilated disk brakes. Hydraulic brake valves protect the drive engines when moving downhill.

Traveling gear Telescopic crawler undercarriage type T41/380 with mechanical track adjustment from 2.3 – 3.8 m and maintenance-free B6 crawler track (55 links, length 5350 mm) with 700 mm triple-grouser track shoes, canted

Speed 0 - 1.6 km/h stage I0 - 3 km/h stage II

Options Telescopic crawler undercarriage type T41/380 with hydraulic track adjustment of 2.3 - 3.8 m

Maintenance-free B6 crawler track (55 links, length 5350 mm) with 700 mm fl at track shoes, rounded

Maintenance-free B6 crawler track (55 links, length 5350 mm) with 800 mm triple-growser track shoes, canted

OPERATING WEIGHTMass

Note

approximately 54,500 kgBasic machine 835 R withattachment K18 and600 l multi-shell grab

The operating weight variesdepending on the design.


ELECTRIC DRIVEOption Power: 160 kW / 400 volt / 50 Hz

Total connected load 270 kVA, customer-provided fusing 355 A at 400 V - motor start-up via star-delta circuit

Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, customer-provided fusing 425 A at 500 V - motor start-up via star-delta circuit

Advantages: Lowest operating costs, low-noise and virtually vibration-free work, long service life of the hydraulic components

11

ATTACHMENTSDesign Decades of experience, state-of-the-art

computer simulation, highest level stability,longest service life, large-dimensionedbearing points, sealed special bearing bushes,precision-crafted, quick-release couplings onthe grapple connections - open/close/rotate

Cylinders Hydraulic cylinders with high-quality sealingand guide elements, end position damping,sealed bearing points

Options Ball valves on the hydraulic lines grappleopen, close, and rotate grappleKinematic position II for greater workingdepthMaritime coatingMaritime coating of all cylinders, nickel-plated and chrome-platedFloat position for equipment via hoistcylinderLift limitation / stick limitation adjustablefor the stop settings, for example in the hall

SENNEBOGENCab type Hydraulically elevating cab E270

Cab equipment Sliding door, excellent ergonomics, climateautomation, seat heater, air-suspension comfortseat, fresh air fi lter / circulating air fi lter, joysticksteering, 12 V / 24 V connections, SENCON

Options Cab E300/260 can be elevated 300 cm, andmoved forward 260 mm hydraulicallyRigid cab elevation 1.00 mAuxiliary heating system with timerCab active-charcoal fi lter inside air/outsideair, ideal for waste recycling applicationsSteering wheel steering with adjustablesteering columnSliding window in the operator doorArmored glass windshield, additional safetyArmored glass roof window, additionalsafetySafety side windowFloor window for a better viewSunblind for roof windowProtective roof gratingFOPS protective roof gratingFront protective gratingRadio and CD player with speakersEnlarged industrial cab with undividedarmored glass windshield

UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in stable,

torsionally rigid box construction

Drive Hydraulic travel drive, integrated in thetraveling gear frame for each travelinggear side through an axial piston motor viacompact planetary gear.

Parking brake Spring-loaded, hydraulically ventilated diskbrakes. Hydraulic brake valves protect thedrive engines when moving downhill.

Traveling gear Telescopic crawler undercarriage typeT41/380 with mechanical track adjustmentfrom 2.3 – 3.8 m and maintenance-free B6 crawler track (55 links, length 5350 mm) with700 mm triple-grouser track shoes, canted

Speed 0 - 1.6 km/h stage I0 - 3 km/h stage II

Options Telescopic crawler undercarriage typeT41/380 with hydraulic track adjustmentof 2.3 - 3.8 mMaintenance-free B6 crawler track(55 links, length 5350 mm) with 700 mmfl at track shoes, roundedMaintenance-free B6 crawler track(55 links, length 5350 mm) with 800 mmtriple-growser track shoes, canted

OPERATING WEIGHTMass

Note

approximately 54,500 kgBasic machine 835 R withattachment K18 and600 l multi-shell grab

The operating weight variesdepending on the design.


ELECTRIC DRIVEOption Power: 160 kW / 400 volt / 50 Hz

Total connected load 270 kVA, customer-provided fusing 355 A at 400 V - motorstart-up via star-delta circuit

Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, customer-provided fusing 425 A at 500 V - motorstart-up via star-delta circuit

Advantages: Lowest operating costs,low-noise and virtually vibration-freework, long service life of the hydrauliccomponents

4.6

4.9

10.8

9.0

6

10.0

1

10.5

11.0

11.6

12.0

11.2

8

8.7

8.8

8.9

9.1

9.4

9.7

9.9

9.8

9.2

8.2

7.9

8.0

8.1

8.3

8.1

7.6

6.8

5.0

7.

7.

7.

7.

6.8

6.

5.6

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10m

I.18092008144350

Technical data, equipment

Machine shown mirror image

All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.

Technical data and dimension information subject to change.

Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,9 m

Cab maXcab E270, hydraulically elevating

K16Kinemat. Position I

4.6

4.9

10.8

9.0

6

10.01

1

10.5

11.0

11.6

12.0

11.2

8

8.7

8.8

8.9

9.1

9.4

9.7

9.9

9.8

9.2

8.2

7.9

8.0

8.1

8.3

8.1

7.6

6.8

5.05

7.

7.

7.

7.

6.8

6.

5.6

10 5 9 1 8 0 7

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

.

.

.

.

.

m

I.180920081443500


Machine shownmirror image

All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.



Cab maXcab E270,hydraulically elevating

K16Kinemat. Position Imat. Posi

13

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

4

7

.0

.8

7.7

6.5

10.6

11.1

11.5

11.4

10.6

9.5

7.9

8.2

8.2

8.4

8.6

8.9

9.2

9.4

9.2

8.8

8.0

7.

7.

7.

7.4

7.5

7.7

7.8

7.

7.7

7.3

6.

6.5

6.5

6.5

6.6

6.7

6.8

6.8

6.5

6.2

7

5.4

5.9

5.9

5.9

5.9

5.9

5.9

5.6

5.2

4.7

5.3

5.2

5.2

5.1

5.0

m

I.18092008113542







K18Kinemat. Position I

13

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

4

7

.0

.8

7..7

6.5

10.66

11.1

11.5

11.4

10.66

9.5

7.7 99

8.2

8.2

8.4

8.68 6

8.9

9.2

9.4

9.2

8.8

8.0

7.7

7.

7.

7.4

7.7 55

7.7

7.8

7.

7.7

7.3

6.

6.5

6.5

6.5

6.666

6.7

6.8

6.8

6.5

6.2

7

5.4

5.9

5.9

5.5 99

5.9

5.9

5.9

5.55.5.66

5.2

4.7

5.5 33

5.2

5.2

5.1

5.5 00

m

I.180920081135420







K18Kinemat. Position Imat. Posit

0 1 2 3 4 5 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

3.2

3.6

11.

6.3

5.7

2

7

10.2

10.4

9.9

8.8

8.5

7.7

8.0

8.3

8.5

8.3

7.9

7.2

6.1

6.2

6.3

6.4

6.6

6.8

7.0

6.9

6.6

6.1

5.5

5.5

5.6

5.7

5.8

5.9

5.2

5.

5.

5.1

5.1

5.2

5.2

5.3

4.

6

4.6

4.6

4.7

4.7

7

4.7

6

4

4.2

4.1

4.0

3.8

m

I.18092008123320





Undercarriage T41/380 - R44D/380 Compact boom 10,8 m BananaLoading stick 7,9 m

Cab maXcab E300/260, hydraulic eleva-ting and forward moving (Option)

B18Kinemat. Position I

0 1 2 3 4 5 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

3.2

3.6

11..

6.3

5..7

2

7

10.2

10.44

9.9

8.8

8.58 5

7.7

8.0

8.3

8.5

8.3

7.9

7.7 22

6.1

6.2

6.3

6.6 44

6.6

6.8

7.0

6.9

6.6

6.6 11

5.5.

5.5.

5.6.

5.5.77

5.8.

5.9.

5.25 2.

5.5.5.

5.

5.1

5.5 11

5.2

5.2

5.5 33

4.4

66

4.6

4.4 66

4.7

4.7

7

4.4 77

6

4

4.2

4.4 11

4.0

3.8

m

I.1809200812332000





Undercarriage T41/380 - R44D/380 Compact boom 10,8 m BananaLoading stick 7,9 m

Cab maXcab E300/260, hydraulic eleva-ting and forward moving (Option)

B18Kinemat. Position Iim

15

8.4

13.3

19.2

10.6

3.1

3.8

8.6

12.0

12.8

13.8

14

8.

7.

7.

7.0

8.5

9.4

9.3

9.5

9.8

10.3

10.8

7

8

8.3

7.1

8.1

8.0

8.1

8.3

8.5

8.8

8.9

8.6

7.9

6.8

6.9

7.0

7.0

7.1

7.2

7.3

7.0

6.4

5.6

6.2

6.2

4.

5.2

4

4

2

0

4.3

4.2

3.9

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10m

I.18092008131536





Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,6 m ULM


K16 ULMKinemat. Position I

15

8.88.4

3.313.33.33.3

19.2

10.6111

3.1

3.8

8.6

12.0121212

12.8

13.8

14

8.

7.

7.

7.7 00

8.5

9.4

9.3

9.5

9.8

10.3

10.8

7

8

8.3

7.1

8.1

8.0

8.1

8.3

8.5

8.8

8.9

8.6

7.9

6.8

6.9

7.0

7.0

7.1

7.2

7.3

7.0

6.4

5.6

6.2

6.2

4.

5.22

4

4

2

0

4.4.3

4.2

3.93 90

4718 30 9 821222

718 5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

7

8

3

.

.

4

3

2

2

22

m

I.180920081315360





Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,6 m ULM


K16 ULMKinemat. Position Imat. Posit

11.4

8.3

6.5

6.0

5.9

6.0

10

1

6.8

2

5

8

2

1

8

3

6

6

3.9

5.6

6.0

6.2

6.4

6.6

6.8

6.7

6.5

6.1

5.6

4.8

4.0

5.1

5.2

5.4

5.6

5.2

4.7

3.9

4.6

4.

4.

4.

4.

5.0

4.

4.0

3.4

3.6

4.4

3.3

3.9

3.9

3.9

3.9

3.9

3.9

3.9

3.8

3.7

3.5

3.5

3.5

3.5

3.5

3.4

3.3

3.2

2.9

5.8

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

24

23

m




Undercarriage R44D/380Pylon 4,5 m

Compact boom 10,8 mLoading stick 9,4 m


B19Kinemat. Position I


11.4

8.3

6.5

6.0

5.9

6.0

10

1

6...8

2

5

8

2

1

8

3

6

6

3.9

5.6

6.0

6.2

6.4

6.6

6.8

6.7

6.5

6.1

5.6

4.8

4.0

5.1

5.2

5.4

5.6

5.2

4.7

3.9

4.6

4.

4.

4.

4.

5.0

4.

4.0

3.4

3.6

4.4

3.3

93.99

3.9

3.9

3.9

3.9

3.9

3.9

3.8

3.7

3.5

3.5

3.5

3.5

3.5

3.4

3.3

3.2

2.9

5.8

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

24

23

m







B19Kinemat. Position It. Positi


17

11.9

5.7

5.8

9.2

8.4

8.2

7.5

9.6

9.5

8.6

5.9

6.4

6.9

8.0

8.0

7.7

7.2

5.3

5.

6.

6.

6.

6.

6.

4.3

4.6

4.8

3

5

7

9

3.9

4.0

4.1

4.2

4.4

4.6

4.8

5.0

5.1

5.2

3.3

3.7

3.8

4.6

4.5

7

8

3.9

0

1

1

2

2

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

2423

m







B19Kinemat. Position II


17

11.9

5.7

5.8

9.2

8.4

8.2

7.5

9.6

9.5

8.6

5.9

6.44

6.9

8.0

8.0

7.7

7.2

5.333

5.

6.

6.

6.

6.

6.

4..33

44.4 6

4.8

3

5

7

9

3.9

4.0

4.1

4.2

4.4

4.6

4.8

5.0

5.1

5.2

3.3 3

3.77

3.8

4.6

4.5

7

8

3.9

0

1

1

2

2

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

2423

m







B19Kinemat. Position IIinemat. Position


0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

2423

14.4

5.7

5.1

5.0

5.3

5.6

11.0

12.3

9.0

0.0

6

1

2

7.2

7.6

8.3

8.1

7.7

7.0

6.9

6.6

5.

5.5

5.7

5.9

6.0

6.

5.

4.7

4.7

4.8

5.0

5.2

5.3

5.4

4.4

4.4

4.5

4.6

4.6

4.7

4.8

4.9

4.9

4.8

4.7

3.6

4.2

4.3

4.3

4.3

4.

4.

4.

4.

4.1

3.8

3.8

0

m








K20Kinemat. Position II

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

20191817161514131211109876543210-1-2-3-4-5-6-7

232221 24

2221

2423

14.414.414 4

5.7

5.1

5.5.00

5.3

5.6

111111.0.0

12.32 3312 3

9.9 00

0.00 0

6

1

2

7.7.22

7.7.7.7 6666

8.8 33

8.1

7.7

7.0

6.9

6.6

55.55

5.5

5.7

5.5 99

6.0

6.

5.

4.4 7

4.7

4.4 88

5.0

5.2

5.5 33

5.4

4.444

4.4

4.4 55

4.6

4.6

4.7

4.4 88

4.9

4.9

4.8

4.4 77

3.63.3..

4.4.22

4.3

4.3

4.3

4.4.

4.

4.

4.

4.4.11

3.8

3.88

000

m








K20Kinemat. Position IIKinemat. Positio

19Dimension information in [mm]Detailed information concerning the grabs, as well as log grabs, quick-release systems, and other attachments is provided in the "Attachments" brochure

Grab recommendation

Design / size Grab contentWeight1

max. load capacityShell shape 2

HO G

SGM l kg kg t400.40 400 1920

8,0

600.40 600 2035

800.40 800 2140

1000.40 1000 2040 2290

1250.40 1250 2180 2415

Design / size Grab content Weight1 max. payload

SGZ l kg t

1500.50 1500 1989

8,0

2000.50 2000 2246

2500.50 2500 2345

3000.50 3000 2532

4000.50 4000 2880

3000.50 L 3000 2140

8,03500.50 L 3500 2260

4000.50 L 4000 2480

4500.50 L 4500 2600

1500.50 HD 1500 22408,0

2000.50 HD 2000 2535

Type series / model Power DeadweightBreak-away

forceLoad-bearing

in kg

WOKO kW kg kN Bramme(safety factor 2)

S-RSL 15 12,2 1950 360 1800

S-RSL 17 17,0 2500 460 2300

S-RLB 13,5 10,0 1700 300 15000

S-RLB 15 11,7 2400 380 19000

S-RLB 17 17,8 3300 640 32000

Recommended magnetic generator: 15 kW / 20 kW


max. load capacityShell shape2

HO G

SGM l kg kg t400.40-4 400 1570 1720

8,0

600.40-4 600 1790

800.40-4 800 1930

1000.40-4 1000 1755 2085

1250.40-4 1250 1850 2200

Double shell grab SGZ

1) Weight information without grab suspension, stick bolts, hose system

2) Half-open shells: Shell sheet steel 400 mm wide, from content 1250 l shell sheet steel 500 mm wide

*) On request

19Dimension information in [mm]Detailed information concerning the grabs, as well as log grabs, quick-release systems, andother attachments is provided in the "Attachments" brochure

Grab recommendation


max. load capacityShell shape 2

HO G

SGM l kg kg t400.40 400 1920

8,0

600.40 600 2035

800.40 800 2140

1000.40 1000 2040 2290

1250.40 1250 2180 2415

Design / size Grab content Weight1 max. payload

SGZ l kg t

1500.50 1500 1989

8,0

2000.50 2000 2246

2500.50 2500 2345

3000.50 3000 2532

4000.50 4000 2880

3000.50 L 3000 2140

8,03500.50 L 3500 2260

4000.50 L 4000 2480

4500.50 L 4500 2600

1500.50 HD 1500 22408,0

2000.50 HD 2000 2535

Type series / model Power DeadweightBreak-away

forceLoad-bearing

in kg

WOKO kW kg kN Bramme(safety factor 2)((

S-RSL 15 12,2 1950 360 1800

S-RSL 17 17,0 2500 460 2300

S-RLB 13,5 10,0 1700 300 15000

S-RLB 15 11,7 2400 380 19000

S-RLB 17 17,8 3300 640 32000

Recommended magnetic generator: 15 kW / 20 kW


max.load capacityShell shape2

HO G

SGM l kg kg t400.40-4 400 1570 1720

8,0

600.40-4 600 1790

800.40-4 800 1930

1000.40-4 1000 1755 2085

1250.40-4 1250 1850 2200

Double shell grab SGZ

1) Weight information without grabsuspension, stick bolts, hose system

2) Half-open shells: Shell sheet steel 400 mm wide,from content 1250 l shell sheet steel 500 mm wide

*) On request

Dimensions

835 R with wide gauge undercarriage R44D/380 and hydraulic elevating andforward moving cab E300/260

835 R with hydraulic telescopic undercarriage T41/380 and hydraulic elevating cab E270

Transport width 3000 mm

6355

25902600

5350

440038004500

3675

30006753675 3295

1050

45003800 5350

5810

Dimensions

835 R with wide gauge undercarriage R44D/380 and hydraulic elevating andforward moving cab E300/260

835 R with hydraulic telescopic undercarriage T41/380 and hydraulic elevating cab E270

Transport width 3000 mm

21

L

H2

X

Loading boom

GrabstickTransport length (L)

Transport height (H2)

Transport height (H1)

Transport height (X)

K16 9,1 m 6,9 m 13,5 m 3,20 m - -K18 10,1 m 7,9 m 14,5 m 3,90 m 3,50 0,20 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m - -K16 ULM 9,1 m 6,6 m 13,5 m 3,80 m 3,45 0,20 m

Dimensions

Transport dimensions 835 R with undercarriage type T41/380

835 R with wide gauge undercarriage R44D/380, 4,5m Pylon and hydraulic elevating cab type E270

21

5610

700

45003800 4240

5100

8040

6100

7350

8450

4,5 m 4,5 m

1070

0

L

H2

X

Loadingboom

GrabstickTransport length (L)

Transportheight (H2)

Transportheight (H1)

Transportheight (X)

K16 9,1 m 6,9 m 13,5 m 3,20 m - -K18 10,1 m 7,9 m 14,5 m 3,90 m 3,50 0,20 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m - -K16 ULM 9,1 m 6,6 m 13,5 m 3,80 m 3,45 0,20 m

DimensionsDimensions

Transport dimensions 835 R with undercarriage type T41/380

835 R with wide gauge undercarriage R44D/380, 4,5m Pylon and hydraulic elevating cab type E270

ca.11

25

5350

X

L

H

Transport dimensions

Loading boom GrabstickTransport length

(L)Transport height

(H)Transport height

(X)

K16 9,1 m 6,9 m 13,4 m 3,45 m 0,25 mK18 10,1 m 7,9 m 14,4 m 3,45 m 0,50 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m 0,25 mK16 ULM 9,1 m 6,6 m 13,4 m 3,45 m 0,50 m

Transport dimensions 835 R with undercarriage type R44D/380

Crawler, B6 crawler R44D/380 with 700 mm track shoes, weight approx. 6.850 kg - 2 pieces

ca.11

25

5350

X

L

H

Transport dimensions

Loading boom GrabstickTransport length

(L)Transport height

(H)Transport height

(X)

K16 9,1 m 6,9 m 13,4 m 3,45 m 0,25 mK18 10,1 m 7,9 m 14,4 m 3,45 m 0,50 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m 0,25 mK16 ULM 9,1 m 6,6 m 13,4 m 3,45 m 0,50 m

Transport dimensions 835 R with undercarriage type R44D/380

Crawler, B6 crawler R44D/380 with 700 mm track shoes,pp pweight approx. 6.850 kg - 2 pieces

23

Notes

23

Notes

Documents

224 54,5 - psndealer.compsndealer.com/dealersite/images/newvehicles/2015/nv1011752_1.pdf · Multi-shell grab Double shell grab ... Slewing ring Strong ball race slewing ring, sealed