Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
C A N A DA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CAU S A 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US
REVISED JULY 2019
CATALINA21" OVAL DROP-IN SINK
NOTES: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. Measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA and OBC barrier-free requirements, if installed according to the standard. It is the responsibility of the installer to comply with this standard prior to installation.
PRODUCT SPECS:- Vitreous china
- Front overflow hole
- Single hole, 4" or 8" faucet center
- Template supplied
- Faucet not included
DIMENSIONS:514mm W x 432mm D x 194mm H
20¼" W x 17" D x 7⅝" H
COMPLIANCE CERTIFICATIONSMeets or exceeds the following:
- IAPMO cUPC
- ASME A112.19.2 / CSA B45.1
- ANSI A117.1 ADA Guideline
- NBC and OBC Section 3.8 Barrierfree design and CSA B651 standard
SHIPPINGCube 1.92
GW 22 lbs
¨ 4110BGW Single Hole¨ 4140BGW 4" Center¨ 4180BGW 8" Center
TO BE SPECIFIED
Colour:n Soft White
204mm (8")
514mm (20¼")
260mm(10¼")
318mm(12½")
SUPPLIES ASREQUIRED
1¼" O.D. WASTE
COUNTERTOP
113mm(4⅜") Max.
*280mm (11") Min.
*200mm(7⅞") Min.
KNEECLEARANCE
TOE CLEARANCE*229mm (9") Min.
*685mm(27")Min.
*864mm (34") MaxFOR ADA COMPLIANCE
OR*840mm (33") Max
FOR OBCBARRIER-FREECOMPLIANCE
FINISHED FLOOR
FIN
ISH
ED W
ALL
6"153mm
7-5/8"194mm
COUNTERTOP
*483mm (19") Max.
432mm (17")
FAUCET DRILLING
NOTE: * Starred measurements comply with ADA and OBC barrier free accessibility requirements. Dimensions shown for location of supplied and waste are suggested.
Single Hole, 102mm (4") or 204mm (8")
62mm(2½")
3 Holes32mm (1¼")
180mm(7⅛")
OVERFLOW HOLE
44mm(1¾")
64mm (2½")COUNTER TOP
CUT OUT478mm x 395mm
(18⅞" x 15½")