Embed Size (px)
Citation preview
GEO-Packers TM DST PACKER TEST TOOL
GEO-PACKER 21" HO DST SINGLE PACKER TESTING TOOL HQ54LP27SE0.5
Perm bility Packer Test Procedure
1. Pull th inneTTe assembly from the core barrel, leaving the drill string in place.
2. Elevate the drill stria9 off the drill hole bottom and I expose th permeaBlity zone.
Secure/ st bilise the drill)ktring in place. Install the sealing tight head. Lower the packer through the sealing tight head and drilPtring, positioning into the core barrel. Install steel washers and rubber shies in the tight
ead and tighten the compression cap. 7. Co ect the nylon inflation tube to the g s/air supply. 8. Slow inflate the permeability packer in i rements
of until e desired pressure is met. Inject wa r through the tight head asse packer into • he test zone.
ermeability est is run in under instruction b oject engin r.
1 1 Once testing is omplete deflate the packer. 12. Make suds pack r is fully deflated before movin
from the drill ho e. 13. Undo comp n tight head and remove rubbe
seals and stee shers. 14. Reinstall the co pression cap and remove the pack r. 15. Remove the seal ng tight head and then lower the inner tube assembl into position. 16. Connect the dr' I rods, lowering the drill string t
the hole botto and restart drilling. 7. OHS procedu es must be followed.
flation an • use of packers and packer equip rators own risk.
HO WIRELIN ORING DIAMOND BIT SPEC Bit set IDS CORED HOLE SIZE
3.78-
HO DRILL ROD SPE CATIONS gIFilc
jo
OD (inch) WEIGHT ) VOLE (Gal) 11111101.808 76.896
Max Working pressure vs hole diameter Boreholes diameter (in) 2.2" 2.4" 2.6" 2.8" 3" 3.2" 3.4" 35" 3.7" 4" 41" 4.3" 4.5"
Percentage inflation diameter 4.8 14.3 23.8 33.3 42.9 52.4 61.9 66.7 76.2 90.5 95.2 104.8 114.3
Inflation pressure (PSI) 2250 2000 1750 1450 1150 1000 850 725 580 500 435 360 290
Non confined Free air Inflation Diameter (in) 27 2.4" 2.6" 2.8" 3" 3.2"' 3.4" 3.5" 3.7" 4" 4.1" 4.3" 4.5"
Inflation pressure (PSI) 22 30 36 41 45 52 61 67 80 87 94 116 160
Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia
Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 [email protected] www.ripe-packers.com • WA Australia Supplier Manufacturer of Inflatable Packers for DST Well Packer Testing Permeability single / double packer testing equipment and Services AU.
GEO-Packers TM DST PACKER TEST TOOL
GEO-PACKER 21" HQ DST DOUBLE PACKER TESTING TOOL HQ54LP275E0.5
TIGHT HEAD NFLATION / WIRELINE SEALING
Perm bility Packer Test Procedure
RIG WIRELINE
ALL BORE YLON INFLATIO NE
URFACE
HO DRILL RO 7. Co 8. Slow
____4------HO CORED HOLE Iv of until
'
RO D M PACKER
. inject wa ..._........... , packer._
' --------- -ITE 10.
from the drill e. h d h
ATER INJECTION HO
oject engin 1 1 testing is t Price -- -- -F10 BIT SEATING SUB 12. Make suee pack ''
-OPEN HOLE BOTTOM PA
1. Pull th inneYTe assembly from the core barrel, leaving the drill string in place.
2. Elevate the drill stria9 off the drill hole bottom and I expose th permeaBlity zone.
3. Secure/ st bilise the drill)ktring in place. Install the sealing tight head.
5. Lower the packer through the sealing tight head and drllPtring, positioning into the core barrel. Install steel washers and rubber shies in the tight
ead and tighten the compression cap. ect the nylon inflation tube to the g s/air supply.
inflate the permeability packer in i rements e desired pressure is met.
r through the tight head asse he test zone.
ermeability est is run in under instruction b r. omplete deflate the packer. r is fully deflated before movin
13. Undo comp n tight head and remove rubbe seals and stee shers.
14. Reinstall the co pression cap and remove the packer. 1 15. Remove the seal ng tight head and then lower the
inner tube assembl into position. 16. Connect the dr' I rods, lowering the drill string t
the hole botto and restart drilling. 7. OHS procedu es must be followed.
flation an • use of packers and packer equip h op rators own risk.
D ORING DIAMOND SEC
Bit set ID 27311.101
KER 2 0 WIREL
CONED HOLE SIZE 3.78-
I
96mm DIAMOND N HOLE
HO DRILL ROD SPECIFICATIONS
E ID (inch) OD (inch) WEIGHT (lb) lieWME (Gal) 76.896 1.808 HO H0 3.063 3.5
Max Working pressure vs hole diameter Boreholes diameter (in) 2.2" 2.4" 2.6" 2.8" 3" 3.2" 3.4" 3.5" ar 4" 4.1" 4.3" 4.5"
Percentage inflation diameter 4.8 14.3 23.8 33.3 42.9 52.4 61.9 66.7 76.2 90.5 95.2 104.8 114.3
Inflation pressure (PSI) 2250 2000 1750 1450 1150 1000 850 725 580 500 435 360 290
Non confined Free air Inflation Diameter (in) 2.2" 2.4" 2.6 - 2.8" 3" 3.2" 3.4" 3.5" 3.T 4" 4.1" 4.3" 4.5"
Inflation pressure (PSI) 22 30 36 41 45 52 61 67 80 87 94 116 160
Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia
Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 [email protected] www.ripe-packers.com • WA Australia Supplier Manufacturer of Inflatable Packers for DST Well Packer Testing Permeability single/ double packer testing equipment and Services AU.
