AUCTIONWednesday, November 9, 2005Beginning at 10:30 A.M. CST2101 18th Avenue NorthBessemer, Alabama 35020

WILLIAMS BRIDGE COMPANYMajor Steel & Beam Fabrication Facility

LIVE ON-SITE

CNC FabricatorWheelabratorsBurning MachinesAuto Saw LineHydraulic Press BrakeHydraulic ShearHydraulic PunchIronworkersHorizontal Boring MillsRadial Arm DrillsPortable DrillsVertical Drill PressesGantry WelderSub-Arc Gantry Beam WeldersBeam Welder

Beam SqueezerWelding ManipulatorsWeldersPortable Blast EquipmentFlux OvensRecovery SystemPower Beam RollersTrack BurnersAir CompressorsBridge CraneJib CranesMaterial HandlingMobile CraneForkliftsAnd Much More!

Controls

1998 1998

2002

NOW OFFERING FINANCING & LEASINGBIDITUP Capital Corporation

Taylor 36,000-Lb. Diesel Forklift

BCP 14-Wheel 72" x 18' Wheelabrator, w/Dust Collector

Geka 200-Ton CNC Punch, w/Duplicator

Cincinnati 14' O/A x 400-Ton Hydraulic Pressure

203217 BIDITUP 11/7/05 11:10 AM Page 1

– 2 –

CNC FABRICATOR, WHEELABRATORS

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034

CNC FABRICATOR1998 GEKA Mdl. Puma 220-SD CNC Single-End Punch,220-ton capacity, 8" x 8" x 3/4" or flatbar 30" x 3/4" capacity,44 x 12' table capacity, 1"-9/16" punch, 1-1/2" hole throughplate, plate duplicator, Geka Paxi CNC Fagor 1500 control,s/n 321.

WHEELABRATORS2002 BCP Wheelabrator Post Blast Structural Unit BlastMachine, Mdl. DEA01235, USF surface preparation, (14)wheels, 18' vertical opening, 8' horizontal opening, recoverysystem, 460 volt, 544 hp., 520 hours, replacement costapproximately $750,000, s/n 2636.

1991 PANGBORN Mdl. ES-1848-10 Wheelabrator,8-wheel, 4' x 10' capacity, 100' infeed conveyor, 100' exitconveyor, dust collector, s/n 907028.

1998 Geka 200-Ton CNC Punch, w/Duplicator

Controls

1998

2002 BCP Dust Collector

1990s Wheelabrator 8-Head 48" x 8' Cap.

2002 BCP 14-Wheel 72" x 18' Wheelabrator, w/Dust Collector

2002

1990s

2002

5-Head Mig CNC Torch,10' x 130' Capacity

203217 BIDITUP 11/7/05 11:11 AM Page 2

– 3 –

BURNING MACHINES, AUTO SAW LINE, HYDRAULIC PRESS BRAKE,HYDRAULIC SHEAR, HYDRAULIC PUNCH

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

BURNING MACHINES1998 C & G Mdl. Taurus CNC Burning Machine, 14' x 40'capacity water table, (4) oxy torches, plasma head, HyperthermMax 200 plasma power source, Hypertherm Plasma ArcWriter,Speedair refrigerated dryer, s/n G724.

1995 MG SYSTEMS Mdl. Apollo HS8G-8 CNC BurningMachine, 6" max. thickness, 8-torch head, 10' wide x 135'capacity burning table, 3–250 IPM, Festoon suspension system,115-volt, single-phase, Victor oxyfuel torches, dual high/lowpreheat control panel, w/Automatic Pierce Rate System 80 CNCcontrol, s/n AP8PHSGNC-95-3042.

MG Type Burning Machine, 9' x 160’, 5-head torch.

AUTO SAW LINE1999 BEHRINGER Mdl. HBP530-1104G Automatic Saw Line,43.3" x 19.6" capacity, 4° bias on blade, mitering capability 45° inboth directions,10 hp.drive motor,60' powered hydraulic infeedconveyor,60' powered outfeed conveyor,1,000-lb.per foot rollercapacity, Promacut measuring device.

HYDRAULIC PRESS BRAKECINCINNATI Mdl. 400H 400-Ton Hydraulic Press Brake, 14'overall bending length,10'6" between housings,12" stroke,w/4-way die, die riser block on bottom, V-die on top, palm buttoncontrols, s/n 40734.

HYDRAULIC SHEARPACIFIC Mdl. 500R10 Hydraulic Shear, 10' x 1/2" capacity, 10'squaring arm, hydraulic load indicator, ball transfer table, flushfloor-mounted, s/n S10383.

HYDRAULIC PUNCHHILLES & JONES 200-Ton Hydraulic Punch, 60" throat,hydraulic unit.

1998 C & G CNC 5-Head Torch Burner, 14' x 40' Water Table & 200-Amp Plasma

1998

>1999 Behringer Mdl. ITBP530 Mitre Auto Saw Line,

w/Promacut Auto Conveyor & Measuring System

1999

Pacific 10' x 1/2" Hydraulic Shear

Cincinnati 14' O/A x 400-Ton Hydraulic Press Brake

203217 BIDITUP 11/7/05 11:11 AM Page 3

– 4 –

IRONWORKERS, HORIZONTAL BORING MILLS, RADIAL ARM DRILLS,PORTABLE DRILLS, VERTICAL DRILL PRESSES, GANTRY WELDER

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034

IRONWORKERS1998 GEKA Mdl. Hydracorop100-A 100-TonHydraulic Ironworker, 6" x 6" x 1/2" anglecapacity, 2' x 5/8" flat bar capacity, 10" x 10" x 1/4"notching capacity, s/n 14806.

HAWTHORN 70-Ton Hydraulic Ironworker, 1"diameter punch, 7/8" plate, notcher, angle cutter,220-volt/3-phase, s/n 00917091.

HORIZONTAL BORING MILLSCARLTON Mdl. 15HB Portable HorizontalBoring Mill, 48" vertical travel, 72" horizontaltravel, 20–1,800 RPM.

BULLARD Horizontal Table-Type Boring Mill,3" capacity, outboard support.

1998 Geka Hydraulic Ironworker, 100-Ton

1998

70-Ton HydraulicIronworker

Carlton 4" HBM Rail Type,Portable

Okuma 9' Radial Arm Drill

Hearn Portable Drill

Hearn 24" x 20' Portable Drill

Johansson Radial Drill

Clausing Variable-Speed Drill Press

Ogden 14' Beam Welding Girder Gantry, w/Lincoln Wire Welder &Recovery System

RADIAL ARM DRILLSOKUMA Mdl. DRBE Radial Arm Drill, 24" column x 9' arm, 6' x 12' table, 15–1,900 RPM, power assistto arm, s/n 4201-2555.

CINCINNATI BICKFORD Super Service Radial Arm Drill, 12" column x 4' arm.

PORTABLE DRILLSHEARN Mdl. SDT7-1 Portable Drill, 2' x 20' capacity, 75–1,200 RPM, s/n 1192.

HEARN Mdl. SDT7A Portable Drill, 4' capacity, motorized pendant control, s/n 1242.

VERTICAL DRILL PRESSESJOHANSSON Floor-Type Drill Press, 24" x 36" table, 80–1,200RPM, s/n 22746.

CLAUSING Mdl. Series 16VC-1 Floor-Type Drill Press, variable-speed, 3-phase, chuck, s/n 507370.

DELTA 14" Floor-Type Drill Press.

JOHANSSON Floor-Type Drill Press, 2 hp., s/n 3223OA-1.

GANTRY WELDEROGDEN Tandem Arc Splicing Gantry Welder, 14' capacity, (2)Lincoln Sub-Arc heads, Weld Engineering flux recovery system,Idealarc DC 1000 power source, Idealarc AC1200 power source.

203217 BIDITUP 11/7/05 11:11 AM Page 4

– 5 –

SUB-ARC GANTRY BEAM WELDERS, BEAM WELDER, BEAM SQUEEZER,WELDING MANIPULATORS, WELDERS, PORTABLE BLAST EQUIPMENT, FLUX OVENS

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

SUB-ARC GANTRY BEAM WELDERS1999 OGDEN Dart Welder, 18' capacity, (2) IdealarcDC600 amp welders, automatic lifting device,reconditioned, s/n’s U1990714588, U1990203230.

Custom Sub-Arc Gantry Welder, 9' x 7’H x 105'track, (2) DC600, (2) 10' capacity LN wire feed.

OGDEN Dart Welder, 8' capacity, flux recoverysystem, (2) Idealarc DC600 welders.

2000 Custom Mdl. ARC1850 Arc Welder, s/n1850-071-799.

Custom Sub-Arc Gantry Welder, 5'–6' x 4'–6'H x105' track.

PRO WELD Mdl. ARC3000 Arc Welder, s/n3000-087-799.

BEAM WELDEROGDEN Girder Beam Welding Line, upgraded1998, 16' capacity x 300' length, (2) Lincoln DC1000amp power sources, (2) Lincoln AC1200 amp powersources, Weld Engineering flux recovering system,(4) 1,000-lb. drum reels.

BEAM SQUEEZER1999 OGDEN 180-Ton Hydraulic Beam Squeezerand Tacking Gantry, 8' capacity, (2) Idealarc DC600power sources, (2) LN7 wire feeders.

Custom Squeezer, w/300-ton press,11' max.width.

WELDINGMANIPULATORSWORTHINGTON Welding Manipulator, 8,000-lb.capacity.

WORTHINGTON Mdl. 60 Welding Positioner,6,000-lb. capacity, 6' x 6' working capacity,motorized in all directions, s/n 37254623.

WELDERS(3) LINCOLN DC1500 Welders.

(2) LINCOLN AC1200 Welders.

(2) LINCOLN DC1000 Welders.

LINCOLN DC-650 Welder, s/n U1921006907.

(5) LINCOLN DC-600 Arc Welders.

LINCOLN R3R-500 Welder, s/n AC464437.

(2) LINCOLN R3R-400 Arc Welders, s/n’sAC596860, AC680851.

(3) LINCOLN DC400 Welders.

(2) MILLER SRH-333 Welders, s/n’s 72-619787,JE798477.

(2) LINCOLN DC-250 Arc Welders.

WESTINGHOUSE Welder, s/n 72110.

(18) LINCOLN LN7 Wire Feeders.

(7) LINCOLN LN9 Wire Feeders.

LINCOLN LN8 Wire Feeder, s/n 79231.

PORTABLE BLASTEQUIPMENTPortable Trailer-Mounted Blast Pot, sandrecovery, stationary sand hopper.

FLUX OVENS(5) HENKEL Mdl. RF100A Flux Ovens, s/n’s108704, 129803, 129804, 109902, and 109702.

Dart 10' Seam Welder, w/Lincoln Power Source

Dart 8' Seam Welder

Dart 8' Gantry Welder – Seam Welder

Custom Sub-Arc Gantry Welder, 10' x 105'

Ogden Hydraulic Squeezer, w/Welding Units

Worthington 6,500-Lb.Mounted-Bed Welding Positioner

1 of 2

Worthington 6,500-Lb.Welding Positioner

1 of 2

(1 of 5) Lincoln 600-Arc Welders

Portable Sandblast Unit

203217 BIDITUP 11/7/05 11:11 AM Page 5

– 6 –

RECOVERY SYSTEM, POWER BEAM ROLLERS, TRACK BURNERS,AIR COMPRESSORS, BRIDGE CRANE, JIB CRANES, MATERIAL HANDLING

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034

RECOVERY SYSTEMHI VAC Mdl. 240LP Portable RecoverySystem, 480-volt/3-phase motor,s/n HV1146.

POWER BEAMROLLERS(2) 40,000-Lb.Capacity Power Beam Rollers.

TRACK BURNERS(4) BUG-O Track Burners, s/n’s 80997,450299, 551099, and 230900.

AIR COMPRESSORS1999 SULLAIR Mdl. 132-300L AirCompressor, 300 hp., 2,300-volt,reconditioned, s/n 003-53204 9173L.

SULLAIR Mdl. 32-300L-WCAC AirCompressor, 300 hp., water-cooled, skid-type, 2,300-volt, s/n 00379802.

INGERSOLL-RAND Rotary Screw AirCompressor, size 16-10-7,600 RPM,125 CFM,s/n JH-7195.

INGERSOLL-RAND Mdl. 375 Portable AirCompressor, diesel-operated.

BRIDGE CRANE1990s PELHAM Double Girder BridgeCrane, 30-ton, 74' span, 30' lifting capacity,pendant controlled, s/n 901465.

JIB CRANES(22) GORBEL Jib Cranes, 5-ton capacity, 20'arm length, 2-ton Coffing hoists on the jibs,pendant control.

MATERIALHANDLING300-Ton Custom Beam Girder, 12' capacity.

200-Ton Custom Beam Girder, 8' capacity.

40-Ton Capacity Lifting Beams, variouswidths 4'–24' wide.

40-Ton x 8' Double-Girder Hook.

30-Ton x 8' Spreader Beam.

CONTRX 4-Ton Jib Lift.

CALDWELL 3-Ton Hook.

Portable Hi Vac

Beam ColumnRotator

<5-Head Torch Burner, CAD

Sullair 300 Hp. Skid-Mounted Air Compressor

<Sullair 300 Hp.Skid-TypeAir Compressor

<Ingersoll-RandPortable Mule 375 Air Compressor

1 of 2

Pelham 30-TX Double Girder Pendant Control Crane

5-Ton Jib, w/2-Ton Hoist

View of Material Handling

Ingersoll-Rand 150 Hp. Air Compressor

<View ofSpreaderBars

203217 BIDITUP 11/7/05 11:11 AM Page 6

– 7 –

MOBILE CRANE, FORKLIFTS, MISCELLANEOUS

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

MOBILE CRANEBANTAM Mdl.Telekruiser S-688 Rough TerrainDiesel Cherry Picker, 20-ton capacity, s/n9006309.

FORKLIFTS1998 TAYLOR Mdl. THD-360L Diesel Forklift,36,000-lb.capacity,8' forks,s/n S-T6-27863.

TAYLOR Diesel Forklift, 31,000-lb.,s/n S30-10006.

HYSTER Mdl. H80XL Diesel Forklift, 8,000-lb.,dual hard tires, sideshift, double mast, s/nGC05D037OR.

KOMATSU Mdl.40 Forklift, 6,000-lb.

CLARK Mdl.CGP 20 Forklift, 6,000-lb.

AND MOREMaintenance Shop: RIDGID 2" Pipe Threader;Tooling; Foot Pedal Control; Vise; HorizontalMill; Lathes; DELTA Bench Grinder; SCHMIDT2-Hose Sandblast Pot; CARLTON Drill; MARVELHack Saw; CAROLINA HV20 Band Saw, s/nHV20005965; Sand Hopper; Welding Tables;Pressure Washer;Welders; Hydraulic Set; Drills;Band Saw; Parts Cleaner; Hand Tools; AssortedHardware; Testing Equipment; HYPERTHERMPlasma Cutters; Steel Strapping Machine;Horizontal Drill; HEATH Pantograph;DYNABRADE Mdl. 30200 Bevelers; DrillSharpener; Torque Wrenches; Chippers;Grinders; Gas; Gauges;Vises; Rod Ovens; Drills;DELTA Table Saw, w/stand; 200-Ton INTERPAC,w/hydraulic ram; Shop Supplies and Equipment:Work Skids; Fire Extinguishers; Hooks; Chains;Time Clocks, Racks, Heaters, Fans, SpreaderBeams, Come-a-Longs, Ladders, Shop Carts;Dollies; Foreman’s Stations; Lockers; Benches;Clamps; Water Coolers; Trash Barrels; Binders;Lockers; Office Furniture; Computers; LunchTables; Fixtures; A-Frames; Carts, Fans;Scrap Dump Hoppers; Miscellaneous: (2)FREIGHTLINER Yard Tractors; 20 Hp. HydraulicUnit;40-Ton Electric Transfer Cart,6' x 20' Long;Electrical Controls; Motorized Beam Rotators;(2) SYMEX Auto Carbon Arc Machines;Conventional Paint Pots; Spray Guns; (4) Idlers;Steel Tubing; Car Puller; 10-Ton HydrascaleCrane Scale; Electrical Components; (2) AirHolding Tanks; (3) 480-Volt Portable Heaters;Golf Cart; Benches; Parts Bins.

15-Ton Hydraulic Bantam RT Crane

Ridgid Pipe Threader

1998 Taylor 36,000-Lb. Diesel Forklift

1998

Hyster 8,000-Lb. Forklift

View of Idler Rolls

Freightliner Fifth-Wheel Tractor

203217 BIDITUP 11/7/05 11:11 AM Page 7

IP-5203217

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

11426 Ventura BoulevardSecond FloorStudio City, California 91604Phone: (818) 508-7034Fax: (818) 508-3025info@biditup.comChip Pearce, AuctioneerAlabama License #1088

ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER

FEATURED AUCTIONWILLIAMS BRIDGE COMPANYMajor Steel & Beam Fabrication Facility

Wednesday, November 9, 2005Bessemer, Alabama

LIVE ON-SITEAUCTION WILLIAMS BRIDGE COMPANY

AUCTIONWednesday, November 9, 200510:30 A.M. CST

LOCATION2101 18th Avenue NorthBessemer, Alabama 35020

PREVIEWTuesday, November 8, 20059:00 A.M. to 4:00 P.M. CST

TERMS & CONDITIONSSale conducted by BIDITUP, subject to our customary terms of sale, (available at the auction siteon the day of the sale),and any and all amendments and modifications announced by the auctioneerat the time of the auction.The auctioneer and seller make no warranties or guarantees, expressedor implied, as to the defects in or the correctness or accuracy of the descriptions in any advertisingof any item(s) being auctioned and will not be responsible for any advertising discrepancies orinaccuracies of any kind. All items sold will be on an “AS IS,”“WHERE IS,” and “WITH ALL FAULTS,”basis “WITHOUT EXCEPTION”and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.”AUCTIONEERAND SELLER MAKE NO WARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, ASTO THE NATURE, QUALITY, VALUE, OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS(THEIR) SUITABILITY FOR ANY USE. AUCTIONEER AND SELLER EXPRESSLY AND SPECIFICALLYDISCLAIM WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL ORINCIDENTAL DAMAGES. It shall be the buyer’s obligation to verify information and descriptionsof property prior to sale. BIDITUP, and its advertising agency assume no liability for errors oromissions in this brochure. The auctioneer does not warrant the age, accuracy, genuineness,authenticity, description, weight, count, or measure of any listings specified herein. Although it isnot likely, auction sales are subject to cancellation or postponement, and sometimes items arewithdrawn from the sale, kindly contact BIDITUP prior to travel as there will be no reimbur-sements. On the day of the sale, all successful bidders must immediately pay the full purchaseprice in cash,certified funds,cashier’s check,wire transfer,or company check with a letter from thebuyer’s bank guaranteeing unqualified payments to BIDITUP.This letter is valid until 30 workingdays after the auction sale.

Company checks without letter from bank guaranteeing unqualified payment will not beaccepted.The failure to make payment promptly shall be considered default and each lot or lotsso purchased will be placed for resale.The buyer must pay the total invoice price for all the lotspurchased before any removal can begin. All buyers must pay applicable sales tax (unlessevidence of exemption is provided to auctioneer’s satisfaction). Buyers are responsible for thetransportation, associated costs, and risks involved in the removal of purchased item(s). Certainitems may contain residual chemicals and/or hazardous materials. The purchaser(s) herebyindemnify and hold harmless the auctioneer and seller from any and all damages, claims, orliability from any injuries to persons or property of any type whatsoever caused during the sale of,during the removal, or during use or operation of the purchased item(s). If you are unable toattend,please contact us regarding placing a proxy bid.PLEASE NOTE:ALL SALES ARE SUBJECT TOA BUYER’S PREMIUM.

DIRECTIONSBIRMINGHAM INTERNATIONAL AIRPORT (BHM)(Approx. 19 Miles from Auction Site)Starting at Birmingham International Airport on Airline Drive,turn right on Transportation Avenue.Turn left on Messer Airport Highway. Bear right onto I-59 South toward Downtown/Tuscaloosa.Take Exit 112/19th Street onto 19th Street North.Turn right on 18th Avenue North. Arrive at 210118th Avenue North, Bessemer and look for auction signs on the right.

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

IP-5203217

UPCOMING AUCTIONS10/25 PROGRESSIVE STAMPING, FABRICATING, ASSEMBLY, TOOL & DIE FACILITY Chicago, IL

10/26 FABRICATING, MINSTER STAMPING, DIE CASTING, MACHINING, PLATING,POWDER COATING FACILITY • Rockford, IL

11/1 MAJOR CNC AMADA FABRICATION FACILITY • Tualatin, OR

11/3 COMPLETE CRT MANUFACTURING FACILITY – STAMPING, DEEP DRAWING, HEATTREATING, COATING, PACKAGING FOR TELEVISION PICTURE TUBE FRAMES, MAGNETICSHIELD PRODUCTS & BAKING PANS, METAL STAMPING FACILITY WITH HYDRAULIC,SSDC, & OBI MECHANICAL STAMPING PRESSES • Perrysburg, OH

11/8 MULTI-MILLION DOLLAR LIGHT & MEDIUM CNC METAL FABRICATION, INJECTIONMOLDING, & ROBOTIC WELDING FACILITY • Anaheim, CA

11/8 MAJOR STEEL & BEAM FABRICATION FACILITY • Bessemer, AL

11/16 MULTI-MILLION DOLLAR VALUATION OF NEW, USED, & REBUILT AUTOMOTIVE PARTS& COMPONENTS, FOREIGN & DOMESTIC • Santa Ana, CA

11/17 COMPLETE CNC MACHINE SHOP INCLUDING VERTICAL MACHINING CENTERS, CNC LATHE,ENGINE LATHE, VERTICAL MILLS, GRINDING, & MORE • San Marcos, CA

11/16 METAL STAMPING FACILITY WITH HYDRAULIC, SSDC & OBI MECHANICALto STAMPING PRESSES • Emporia, KS

11/18 Online Auction Only!

12/8 COMPLETE OUTDOOR PATIO FURNITURE MANUFACTURING FACILITY – STAMPING,WROUGHT IRON AND ROLL FORMING, WELDING, POWDER COATING & PRODUCT LINEWITH SPECIALIZED MACHINES, PRODUCT DRAWINGS, CUSTOMER DATA. Also at Auction:REAL ESTATE–127,000 SQ. FT. BUILDING ON 13± ACRES • Caruthersville, MO

For More Information,Call (818) 508-7034 or Visit WWW.BIDITUP.COM

CALL US AT 818.508.7034

LODGINGHiway Host Motel(Approx. 3 Miles from Site)4301 Bessemer Super HighwayBessemer, Alabama(205) 425-4352

Ace Motel (Approx. 3 Miles from Site)4539 Bessemer Super Highway Brighton, Alabama (205) 428-1421

Villager Lodge Birmingham(Approx 6.5 Miles from Site)5601 E.J. Oliver Boulevard Fairfield, Alabama(205) 786-5577

203217 BIDITUP 11/7/05 11:11 AM Page 8