2020 - reid.com.au€¦ · Construction Product Guide. This publication contains basic details of ramsetreid products relevant to the Commercial Construction sector, which includes

co

mm

erc

ial

co

nst

ruc

tio

np

rod

uc

t g

uid

e

2020

australian edition

to the ramsetreid Commercial Construction Product Guide. This

publication contains basic details of ramsetreid products relevant to

the Commercial Construction sector, which includes multi-story commercial

buildings, apartments, hospital and health, government and institutional

buildings, sports and recreation, transport infrastructure etc.

welcomeramsetreid provide a wide variety of connection solutions including both cast-in and post-installed, making ramsetreid the ideal one-stop-shop for construction connections.

If you are involved in on-site construction such as, pre-cast concrete erection, in-situ formwork and concreting, steel erection or fitting out with internal linings, plumbing, power, data etc, this is the right Product Guide for you.

The basic information in this document will assist to select and place orders for the right size and part number of ramsetreid products.For more detailed technical and application information, please consult ramsetreid Product Catalogues.

For detailed design and engineering information consult ramsetreid Design Guides and Specifier Resource publications.

These documents may be obtained by visiting the Ramset and Reid websites or contacting ramsetreid customer service. Details are on the back page of this Product Guide

commercial construction

pro

du

ct

gu

ide

| 2

02

0

4 product guide | commercial construction

contentRamset™ Direct Fixing Tools & Accessories 5

Gas Technology Tools 6CableMaster™ 800 TrakFast™ 800 InsulFas™ GT3 TrakFast™

Gas Technology Accessories 8

Gas Pins & Fuel Cells 9

Electrical & Plumbing Contractor Packs 11

Direct Fixing Tools 12FrameBoss™ XP Powder Actuated Tool Accessories 14

Drive Pins & Power Loads 15

Ramset™ Power Tools & Accessories 18

DynaDrill™ Rotary & Demolition Hammers 19DynaDrill™ 522 DynaDrill™ 529 DynaDrill™ 533 DynaDrill™ 544 DynaDrill™ 566 DynaDrill™ 585 DynaDrill™ 611

Carbide Bits & Chisels 22U3™ Plus Carbide R3™ Carbide R3™ Plus Carbide D3™ Plus Carbide U3™ Max Carbide R3™ Max Carbide D3™ Max Carbide R3™ Plus Chisels R3™ Max Chisels Accessories

Diamond Drilling & Cutting Range 25Diamond Core Drilling MachinesDiamond Core Bits – Wet Diamond Dry Cutting Machine Diamond Drilling Accessories Wet & Dry Vacuum Diamond Cutting Blades Cut Off Wheels

Lithium-Ion Cordless Range 2818 V Cordless Rotary Hammer 18 V Cordless Hammer Drill / Driver 18 V Cordless Angle Grinder 18 V Cordless Impact Wrench 18 V Compact Cordless Impact Driver 18 V Cordless ChemSet™ Applicator 18 V Batteries & Chargers Impact Sockets

Ramset™ Mechanical Anchoring 31

Extreme Anchoring for Design Specification 32SpaTec™ Plus Safety Anchors TruBolt™ Xtrem™ Stud Anchor Sammy™ Seismic Anchor Tapcon™ Seismic Anchor

Heavy Duty Anchoring 33TruBolt™ Stud Anchors TruBolt™ Xtrem™ Stud Anchors Boa™ Coil Anchors WERCS™ AnkaScrew™ Anchors AnkaScrew™ Anchors DynaBolt™ Anchors DynaSet™ Drop-In Anchors TruFast™ Push-Pull Anchors ShureDrive™ Anchors Electrical Support Fixings RamPlugs™ Nylon Anchors EasyDrive™ Anchors Plastic Plugs

Light Duty Anchors 40Concrete Nails Hollow Wall Anchors WallMate™

Ramset™ Chemical Anchoring 41Anchoring Adhesives 42ChemSet™ 101 Plus Polyester UltraFix™ Plus Polyester ChemSet™ 801 Xtrem™ Vinyl Ester ChemSet™ Reo 502™Plus Epoxy Epcon™ C8 Xtrem™ Pure Epoxy ChemSet™ Maxima™ Capsules

Chemical Anchor Threaded Studs & Fixings 43

Applicators & Installation Accessories 45

Ramset™ Construction Chemicals 46Sealants 47Roof Seal™ Silicone Water Seal™ Silicone Gap Seal BlazeBrake™ FR Sealant

Sealant Accessories 47

Construction Adhesives 48NailFree™ Construction Adhesive Safe-T-Bond™ Water Clean Up Construction Adhesive

Self-Expanding Foams 48FomoFill™ FomoPlus™ Fomo™ Solvent Cleaner BlazeBrake™ FR Foam

Concrete Repair 49Epoxy Paste 1210 Epoxy Grout 7042

Cementitious Grout 49Premier Grout MP UltraFix™ Concremate™

Concrete Additives 49Cemcrete™

Reid™ Reinforcing Solutions 50

Rebate Systems 51ReidBar™ Poly Board ReidBox™ ReBox™ Pull Out Box

ReidBar™ System & Components 54ReidBar™ Starter Bars ReidBar™ Couplers ReidBar™ to Metric Couplers ReidBar™ Inserts ReidBar™ Nut ReidBar™ Domed Plate and Washers

ReidBar™ Accessories 57

ReidBar™ Formwork and Bracing Systems 58ReidBar™ Formwork System ReidBar™ Wing Nut ReidBrace™ RapidBrace™

Reid™ Cast-In Metric Connection Systems 61Metric Ferrules OrbiPlate™

Reid™ Concrete Lifting Accessories 63SwiftLift™ Edge Lift Clutches SwiftLift™ Clutches for SwiftLift™ Headed Anchors Swift™ Shims Accessories

product guide | commercial construction 5

direct fixing tools and accessories

Ramset™ Gas Technology & Powder Actuated tools are used by many professional contractors in Australia and around the world including ceiling and partitioning contractors, insulation installers, electrical contractors, plumbing contractors, pest control installers and formwork contractors.

The Ramset™ Gas Technology System employs the latest technology to fasten to concrete, steel and other common building materials. These revolutionary gas technology systems are extremely fast, cost effective and include automatic power adjustment for greater ease of use.


DIRECT FIXING TOOLS AND ACCESSORIESGAS TECHNOLOGY TOOLS

CableMaster™ 800

Features & Benefits• Battery Gauge – Helps avoid

running out of battery power.• Fuel Cell Gauge – Always know

when to change fuel cells.• Lithium Battery – Fast Charge, Long Life• Tool-less Depth of Drive Adjustment• Power Saving Technology – isolates

battery when tool is not in use

• Compact design with 20 pin magazine – Allows the tool to fit in tight spaces

• Easily removable fastener guide and magazine• Greater tool clearance – Allows the tool

to fit in close to edge applications.• Removable Support Leg – Ensures tool is at

90° to work surface for optimum fixings• Electronically controlled fuel injection – Consistent

power in a wide temperature range.

DescriptionThe RamsetTM CableMasterTM 800 is the most technologically advanced gas tool on the market. The CableMasterTM 800 offers a number of innovative features allowing quicker, safer installation of a wide variety of clips for plumbing, data and electrical installations. The speed at which the CableMasterTM 800 is able to perform installations provides tremendous savings in total installed cost.

Item Code Impact Energy Magazine Capacity Weight Pin Capacity

CABLEMASTER800 82J 20 Pin 3.8kg 15-40mm

TrakFast™ 800

Features & Benefits• Massive 100J power – Consistent fixings even

in extreme applications.• 50 pin magazine – Reduces downtime in

loading the magazine• Battery Gauge – Helps avoid running out of

battery power.• Fuel Cell Gauge – Always know when to

change fuel cells.• Lithium Battery – Fast Charge, Long Life• Tool-less Depth of Drive Adjustment

• Power Saving Technology – isolates battery when tool is not in use

• Optional 20 pin magazine for tight spaces.• Easily removable fastener guide and magazine• Greater tool clearance – Allows the tool to fit in

close to edge applications.• Greater track clearance – Allows the tool to fit

in deep track, up to 57mm.• Removable Support Leg – Ensures tool is at

90° to work surface for optimum fixings• Electronically controlled fuel injection –

Consistent power in a wide temperature range.

DescriptionWith the largest capacity magazine in its class, the Ramset™ TrakFast™800 offers large volume users tremendous savings in time and money. The Ramset™ TrakFast™800 delivers a massive 100J of impact energy allowing quick and safe installation of partitioning track, formwork systems and pest control mesh. The Ramset™ TrakFast™800 is a robust tool that features all of the latest Ramset™ innovations in smart gas tool technologies.


TRAKFAST800 100J 50 Pin 3.9kg 15-40mm

DIRECT FIXING TOOLS AND ACCESSORIES


InsulFast™ GT3

Features & Benefits• The fastest insulation fixing system• Virtually no recoil!• 3 times less cocking force required

than explosive powered tools• Faster install than explosive powered

tools - lower in place cost• Automatic power adjustment• Fixes to concrete and steel without

the need for adjustment

• Compatible with all major insulation types• Low insertion force• Textured face for compatibility

with rendering applications• Sizes to suit soft and rigid insulation

from 25mm to 100mm• Soft insulation with thickness greater

than 100mm may be compressed.

DescriptionThe fastest insulation fixing system! This gas technology system provides effortless overhead fixing of insulation with virtually no recoil. The low tool compression force enhances user comfort.


T3IF 100J N/A 3.5kg 25-100mm Insulation Pins

TrakFast™

Features & Benefits• Increased durability and reliability• Off position to prevent draining the

battery when tool is not in use• Cordless - self powered, no

set up time required • Sequential actuation - safe operation • Tool automatically resets piston

• Narrow nose and profile to reach inside deep leg track

• Soft cushioned grip • Carrying case• Well balanced• Mechanical fuel injection • Low maintenance

DescriptionFor fast installation of partitioning and track, use the Ramset™ TrakFast™ gas tool to provide high volume repetitive fixing into a range of building materials.


TF1200 77J 40 Pin 3.8kg 13-38mm


NOTES:

Item Code Description Pack Qty

TrakFast™ 800 / CableMaster™ 800

018545 Lithium Battery - TrakFast™ 800 / CableMaster™ 800 1 018546 Battery Charger (includes power supply) 1 018543 20 Pin Magazine 1 018544 50 Pin Magazine 1 014641 Magnetic Washer Adaptor - TrakFast 800 1

CableMaster™ 800 PULSALIFT800 Pole tool to suit CableMaster™ 800 only 1 CM800CRADLE Cablemaster™ 800 Cradle, Pole with Trigger and Pole Extension 1 V4-3 3ft PulsaLift™ 800 Pole with Trigger 1 V4-EXT 3ft PulsaLift™ 800 Pole extension 1

TrakFast™ / InsulFast™ GT3

B0092 Battery - TrakFast (TF1200) 1 B0020 Battery Charger - TF1200 (requires power supply) 1 TFPS Battery Charger Power Supply (TF1200) 1

TrakMaster™

TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 337700 Fastener Guide - TrakMaster 1

CableMaster™

TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 336800 Fastener Guide - CableMaster 1

TrakFast™ - TF1100

B20542 Battery - TrakFast - TF1100 1 TFBC Battery Charger - TrakFast TF1100 (requires power supply) 1 TMBCPS Battery Charger Power Supply 1

Common Accessories

B20544L Gas Tool Degreaser / Lubricant 1



GAS TECHNOLOGY ACCESSORIES

ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR

Item Code Shank Length (mm) Pack Qty

011204 25mm Washers 1000

CM800CRADLE



GAS PINS AND FUEL CELLS


P8C620 20 500

P8C625 25 500

P8C630 30 500

P8C635 35 500

TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS - STANDARD DUTY

Item Code Desc, Shank Length (mm) Pack Qty

P8HC615 Heavy Duty Steel/Concrete - 15mm 500

P8HC617 Premium Hard Concrete & Steel 17mm 500

P8HC622 Premium Hard Concrete & Steel 22mm 500

TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS HEAVY DUTY FOR STEEL AND HARD CONCRETE

Item Code Desc, Shank Length (mm) Pack Qty

P8PLY138 Hard Steel Spiral Knurled Pins (TRAKFAST800) 1000

SPIRAL KNURLED PINS FOR FIXING PLYWOOD TO STEEL

NOTES:



TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - STANDARD DUTY

GAS PINS AND FUEL CELLS


FPP012 13 1000

FPP034B 19 1000

FPP100 25 1000

FPP114 32 1000

TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - HEAVY DUTY


FPP012S 13 1000

FUEL PACKS


TFGAS TrakFast Fuel Cell Pack 6

P700GAS Pulsa 700 Fuel cell - CableMaster / TrakMaster 1

INSULFAST GT3 (T3IF) FASTENERS

Item Code Description Length Pack QtyT3IG625 White 25mm 400T3IG625B Black 25mm 400T3IG625G Grey 25mm 400T3IG638 White 38mm 350T3IG638G Grey 38mm 350T3IG650 White 50mm 300T3IG650B Black 50mm 300T3IG663 White 63mm 500T3IG675 White 75mm 250T3IG675B Black 75mm 250T3IG6100 White 100mm 200

NOTES:



ELECTRICAL AND PLUMBING CONTRACTOR FIXING PACKS

Item Code Description Pack Qty CableMaster 800

P8CPGCL Contractor Pack - ClipElec + Hard Conc. Pins 22mm 500 P8CPGCLHC617 Contractor Pack - ClipElec + Hard Conc. Pins 17mm 500 P8CPGDLHC617 Contractor Pack - DataLec Clip + Hard Conc. Pins 17mm 500 P8CPGDLHC622 Contractor Pack - DataLec Clip + Hard Conc. Pins 22mm 500 P8CPGCT Contractor Pack - CTCLIP 500 P8CPGDAS20 C/Pack - Direct Align H/saddle 20mm 400 P8CPGDAS25 C/Pack - Direct Align H/saddle 25mm 400 P8CPGTRH Contractor Pack - Threaded Rod Brkt. 400 P8CPGCWB Contractor Pack - Catinary Wire Brkt. 400

* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.

ClipElec™

DataLec Clip™

Saddle™

Catinary WireBracket™

Threaded RodHanger™

CABLEMASTER & CABLEMASTER 800 ELECTRICAL CLIPS


SPMW Strap & Plate Mounting Washer 500

* While stocks last


DIRECT FIXING TOOLS AND ACCESSORIESPOWDER ACTUATED FIXING TOOLS

FrameBoss™ XPDescriptionThe Ramset™ FrameBoss™ XP is a fully automatic powder actuated tool that is capable of fixing 10 pins without the need to reload or cycle the tool. The automatic piston return system and 10 pin magazine allow for faster fixing rates with less effort. The magazine can be adjusted to lock into a number of positions to allow the tool to be used in confined spaces. The FrameBoss™ XP tool is also supplied with a single shot fastener guide to allow the tool to be used with longer fasteners and assembles such as brackets and clips. With a huge 400 joules of impact energy coupled with power adjustment, the tool can be used in a wide variety of applications e.g. Timber framing, formwork and the fixing of steel track. FrameBoss™ XP is designed to get the job done quickly and save you money.

Features & Benefits• Automatic piston return • No manual cycling required• Easy to maintain on site• 10 Pin magazine and single shot fastener guide• 100mm single shot capacity, • 75mm magazine capacity

• 400J maximum impact energy• Power adjustment• Trigger lock• Hand guard• Cushioned rubber grip

Item Code Impact Energy Pin Capacity Weight Power Load

FRAMEBOSSXP 400J Single Shot 100mm 3.7kg .27 Strip

FRAMEBOSSXPM 400J 75mm with mag. 4kg .27 Strip


NOTES:



NOTES:


FrameBoss™ & FrameBoss™ 75

011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1

FrameBoss™ XP

011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1

Accessories

011158 75mm Magazine to suit XP tool 1 PA9316 Lubricating & Releasing Oil 1



POWDER ACTUATED TOOL ACCESSORIES

* While stocks last

NOTES:



DRIVE PINS AND POWER LOADS

Item Code Shank Length (mm) Head Diameter (mm) Pack Qty

LDU25 25 8 100

LDU32 32 8 100

LDU50 50 8 100

LDU65 65 8 100

LDU75 75 8 100

LDU90 90 8 100

LDU99 100 8 100

COLLATED DRIVE PINS FOR USE WITH FrameBoss™


C960C 60 9 300

C975C* 75 9 300

* For use with FRAMEBOSS™ 75 FRAMEBOSS™ XP only

SPECIALIST PINS FOR FIXING TO STRUCTURAL STEEL


SC950 Pin for fixing 35mm timber to steel 100

SC960 Pin for fixing 45mm timber to steel 100

DRIVE PINS AND POWER LOADS FOR USE WITH FrameBoss™, FrameMaster™, FormMaster™ & JobMaster™

NOTES:



SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE FOR USE WITH FrameBoss™,FrameBoss™ 75 & FrameBoss™ XP


SC925C 25 9 300

SC930C 30 9 300

SC940C 40 9 300

SC950C 50 9 300

SC960C 60 9 300

SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM, FormMasterTM & JobMasterTM


SBR9 20mm Pin for Steel with 14mm Washer 100

WASHERED PIN ASSEMBLIES


LWU25 25 22 100

LWU32 32 22 100


NOTES:



POWDER ACTUATED ACCESSORIES - CLIPS


RCA25F Angle (Ramclip) 100

Item Code Strength Colour Pack Qty

PLSGR22 Weak Green 100

PLSYW22 Medium Yellow 100

PLSRD22 Strong Red 100

STRIP POWERLOADS .27 calibre


FOR USE WITH FrameBoss™, FrameMaster™, FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P)

NOTES:

Ramset™ Power Tools have been used by construction trades for over 40 years in Australia and New Zealand. We understand the need for Power, Toughness and Reliability in heavy construction and provide premium tools with the latest vibration technology. Our high performance range includes:

• DynaDrill™ Rotary Hammers

• Cordless Tools

• Carbide Tipped Drill Bits

• Diamond Drilling & Cutting

power tools and accessories


POWER TOOLS AND ACCESSORIES

DynaDrill™ ROTARY & DEMOLITION HAMMERS

DynaDrill™ 2kg Combi Hammer

Features & Benefits• 790W Motor with 2.7 Joules of impact energy • Block construction. Reliable and durable housing• Forward and reverse rotation & chisel function

• Rotating brush plate for equal power in forward and reverse mode

DescriptionThe Ramset DynaDrill™ 522 Combi Hammer is the ideal tool choice for all those common drilling applications whether into concrete, timber or steel.

Item Code Power Impact Force Max Drill Dia Vibration Carbide

DD522 790W 2.7J 24mm 13 m/s2 R3 Plus U3 Plus


Features & Benefits• Powerful 850W Motor with

3.2Joules of impact energy • Class leading drilling rates and

chisel performance

• Substantially improved vibration reduction• Rotating brush plate for same power

in forward or reverse mode• Quick change chuck system

DescriptionThe Ramset DynaDrill™ 529 Combi Hammer is truly the class leasing 2kg tool on the market. The tool of choice with its powerful motor, enhanced anti vibration and the versatility of the quick change chuck system.




Features & Benefits• Powerful 800W Motor• Class leading drilling and chiseling performance• Low vibration due to the Ramset vibration

control system

• Balanced weight distribution as a result of the L shaped design

• Quick change chuck system

DescriptionThe Ramset DynaDrill™ 533 sets new standards for a 3kg combi hammer. Its ergonomic drop motor design gives the tool a more balanced feel and delivers the additional performance when stepping up from a 2kg tool.







Features & Benefits• Vibration damping mechanism for

super smooth operation• In-built safety clutch providing operator

protection should a drill bit jam.• Soft grip, back and side handle for

safe and fatigue free operations

• Finger tip control for point start accuracy with variable speed adjustment

• Sealed lubrication system for extended service intervals

• Quick change chuck system• Reverse switch

DescriptionThe Ramset™ DynaDrill™ 544 is a class leading 4kg combi hammer drill in terms of performance and vibration reduction mechanisms. A robust and ergonomic design makes it the ideal tool for volume drilling in concrete, light picking and chiselling.




Features & Benefits• Powerful and robust 1,100W Combi Hammer

provides extended tool lifetime under the toughest working conditions.

• Vibration damping systems built into the tool holder, rear and auxiliary handles deliver exceptionally low vibration values for a tool in this class.

• New Rotation Control system stops the tool immediately upon the drill bit jamming providing the highest level of safety for the operator.

• Horizontal and vertical drilling level gauge for accurate drilling.

• Power LED indicator and service LED indicator• One hand chuck system

DescriptionThe Ramset™ DynaDrill™ 566 is a powerful and versatile Combi-Hammer designed to get through the toughest jobs with ease. The DD566 incorporates many new and innovative technologies such as vibration and rotation control which make the tool more comfortable and safer for the operator. This is the ideal tool for those that require high productivity and lifetime from a large Combi-Hammer.


DD566 1100W 6.5J 45mm 8.2 m/s2 U3 & R3 Max

RRCRAMSETROTATIONCONTROL

R


R

NOTES:


R





Features & Benefits• 1500W Motor with 12.5J of Impact Energy

delivers the best possible drilling and chiselling performance

• Turbo Function utilises the power which is normally used in drilling mode for chiselling

• RVC Anti-Vibration Systems include a de-

coupled main handle, a mass damper and anti-vibration impact mechanism

• Auto Lock-On function increases operator comfort while chiselling

• Six position speed dial for adjusting impact force to base material

DescriptionThe Ramset™ DynaDrill™ 585 is our largest Combi-Hammer at 8kg. Robustly designed for large diameter drilling and chiselling in concrete. It’s high performance rate and three way anti-vibration systems ensure it is one of the most productive and safest tools on the worksite.


DD585 1500W 12.5J 45mm 8.0 m/s2 U3 & R3 Max


R

DynaDrill™ 11kg Demolition Hammer

Features & Benefits• High performance to weight ratio with 1700W

motor and 23J of impact energy.• In-line design optimizes the tools centre of

gravity making it ideal for downward demolition applications.

• Ramset Vibration Control (RVC) controls vibration levels to only 8m/s²

• Adjustable impact force to match base material.• Vario-Lock mechanism for adjusting the chisel

angle into one of 12 different positions• Lock-on power switch which can be operated

without removing your hands from the handle.

DescriptionThe Ramset™ DynaDrill™ 611 is an in-line Demolition Hammer. With a powerful motor and high impact energy it has one of the best performance to weight ratios in the demolition tool market.


DD611 1700W 23J 12 8.0 m/s2 R3 Max


R

NOTES:



U3TM PLUS TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDU305050 5 50 x 110 1 DDU305100 5 100 x 160 1 DDU306050 6 50 x 110 1 DDU306100 6 100 x 160 1 DDU306150 6 150 x 210 1 DDU306100X3 1/4” 100 x 160 1 DDU308100 8 100 x 160 1 DDU308150 8 150 x 210 1 DDU310100 10 100 x 160 1 DDU310200 10 200 x 260 1 DDU312150 12 150 x 210 1 DDU312250 12 250 x 310 1 DDU313200 13 200 x 250 1 DDU314200 14 200 x 250 1 DDU316200 16 200 x 250 1 DDU316400 16 400 x 450 1

R3TM PLUS CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDR305050 5 50 x 110 1 DDR305100 5 100 x 160 1 DDR305125X5 5.5 150 x 210 1 DDR306050 6 50 x 110 1 DDR306100 6 100 x 160 1 DDR306150 6 150 x 210 1 DDR306050X3 1/4” 50 x 110 1 DDR306100X3 1/4” 100 x 160 1 DDR306150X3 1/4” 150 x 210 1 DDR308065 8 100 x 160 1 DDR308150 8 150 x 210 1 DDR310100 10 100 x 160 1 DDR310180 10 200 x 260 1 DDR310400 10 400 x 460 1 DDR312125 12 150 x 210 1 DDR312250 12 250 x 310 1 DDR312400 12 400 x 460 1 DDR312125X7 1/2” 150 x 210 1 DDR314200 14 200 x 250 1 DDR315150 15 150 x 200 1 DDR316125 16 150 x 200 1 DDR316200 16 200 x 250 1 DDR316400 16 400 x 450 1

R3TM PLUS Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DQR318200 18 200 x 250 1 DQR318400 18 400 x 460 1 DQR319250 19 250 x 310 1 DQR320200 20 200 x 250 1 DQR320400 20 400 x 450 1 DQR322200 22 200 x 250 1 DQR322400 22 400 x 450 1 DQR324200 24 200 x 250 1 DQR324400 24 400 x 450 1 DQR325400 25 400 x 450 1 DQR326200 26 250 x 300 1 DQR326400 26 400 x 450 1

CARBIDE DRILL BITS AND CHISELS



D3™ PLUS DUST-EXTRACTING CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total Length (mm) Pack Qty

DDER12200 12 200 x 320 1 DDER14250 14 250 x 370 1 DDER16250 16 250 x 370 1 DDER18250 18 250 x 370 1 DDER20250 20 250 x 370 1 DDER24250 24 250 x 370 1

For use with AC1630P 32L Wet / Dry Vacuum

CARBIDE DRILL BITS AND CHISELSU3TM MAX TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDUM12200 12 200 x 340 1 DDUM12400 12 400 x 540 1 DDUM14200 14 200 x 340 1 DDUM14400 14 400 x 540 1 DDUM16200 16 200 x 340 1 DDUM16400 16 400 x 540 1

R3TM MAX Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDYM18200 18 200 x 340 1 DDYM18400 18 400 x 540 1 DDYM18600 18 600 x 740 1 DDYM20200 20 200 x 320 1 DDYM20400 20 400 x 520 1 DDYM20800 20 800 x 920 1 DDYM22200 22 200 x 320 1 DDYM22400 22 400 x 520 1 DDYM22800 22 800 x 920 1 DDYM24200 24 200 x 320 1 DDYM24400 24 400 x 520 1 DDYM25400 25 400 x 520 1 DDYM25800 25 800 x 920 1 DDYM26400 26 400 x 520 1 DDYM28400 28 400 x 520 1 DDYM28800 28 800 x 920 1 DDYM30400 30 400 x 520 1 DDYM32400 32 400 x 520 1 DDYM32800 32 800 x 920 1 DDYM35400 35 400 x 520 1 DDYM38400 38 400 x 520 1 DDYM40400 40 400 x 520 1

D3™ MAX DUST-EXTRACTING CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total Length (mm) Pack Qty

DDEM14400 14 400 x 600 1 DDEM16400 16 400 x 600 1 DDEM18400 18 400 x 600 1 DDEM20400 20 400 x 600 1 DDEM22400 22 400 x 600 1 DDEM25400 25 400 x 600 1 DDEM28400 28 400 x 600 1 DDEM30400 30 400 x 600 1 DDEM32400 32 400 x 600 1 DDEM35400 35 400 x 600 1

For use with AC1630P 32L Wet / Dry Vacuum





CHISELS - R3TM PLUS Item Code Total Length (mm) Type Pack Qty

DHR3PCS 250 Point 1 DHR3FCS 250 20 mm Flat 1 DHR3SC040 250 40 mm Spade 1

CHISELS - R3TM MAX Item Code Total Length (mm) Type Pack Qty

DHSMPCM 400 Point 1 DHSMFCM 400 25mm Flat 1 DHSMFCL 600 25mm Flat 1 DHSMSC050 400 50mm Spade 1 DHSMSC080 300 50mm Spade 1 DHSMSC115 300 115mm Spade 1

DYNADRILLTM ACCESSORIES Item Code Description Pack Qty.

054288 Quick Fit Keyless Chuck For DD529, DD533 and DD544 Combi Hammer 1 DAR3DH Chuck Adaptor - R3 Plus 1 DASMR3 Adaptor R3 Max - R3 Plus 1

NOTES:



DIAMOND DRILLING AND CUTTING RANGEDIAMOND DRILLING MACHINES

Diamond Core Drilling Kit

Features & Benefits• Powerful 2000W motor that can

be hand held or rig mounted• Suitable for ½” BSP & 1 ¼”

UNC Core Bit connections• Robust drilling rig suitable for

drilling up to 200mm diameter

• Sturdy rotomolded plastic and stainless steel tool case

• Solid recessed wheels for ease of transportation to and from the jobsite.

• Integrated transport and carrying handles• Molded lid enables nesting of multiple cases

to prevent sliding during transportation

DescriptionA fully integrated diamond core drilling system supplied complete with a drilling motor, drilling rig and connection accessories. Entire kit is supplied in a robust double walled tool case.


RM160KIT Diamond Core Drilling Kit 1

RM160 Drilling Motor 2000W (Only) 1

TRIX160 Small Diamond Drilling Rig (Only) 1

Diamond Drilling Motor 2500W

Features & Benefits• Integrated friction clutch for the

highest level of operator safety• Thermal protection to avoid

over heating of the motor

• Double shank means the machine is compatible with ½” and 1 ¼” core drills

• Two speed gear box• Soft start motor.

DescriptionThe RM250 is a high performance drilling machine designed for use in conjunction with a drilling rig. A two speed motor with a maximum drilling diameter of 250mm makes it the ideal machine for a range of core drilling applications on the construction site


RM250 Drilling Motor 2500W 1

TRIX350 Large Diamond Drilling Rig 1



DIAMOND DRILLING AND CUTTING RANGE

DIAMOND DRILLING CORE BITS - WET Item Code Length (mm) Diameter (mm) Pack Qty

1/2” BSP Thread DCWS014400 400 14 1 DCWS016400 400 16 1 DCWS018400 400 18 1 DCWS020400 400 20 1 DCWS024400 400 24 1 DCWS026400 400 26 1 DCWS032400 400 32 1 DCWS035400 400 35 1 DCWS040400 400 40 1 1 1/4” UNC DCWL052450 450 52 1 DCWL067450 450 67 1 DCWL077450 450 77 1 DCWL082450 450 82 1 DCWL092450 450 92 1 DCWL102450 450 102 1 DCWL117450 450 117 1 DCWL122450 450 122 1 DCWL125450 450 125 1 DCWL132450 450 132 1 DCWL142450 450 142 1 DCWL152450 450 152 1Other core sizes (150 - 350) are available on request. please consult your Ramset™ representative for advice.

DIAMOND DRY CUTTING MACHINE Item Code Description Pack Qty

RW150ES Concrete Chaser 2500W 1

DIAMOND DRILLING ACCESSORIES Item Code Description Pack Qty

SDP1 Vacuum Pump 200W 1 624753 Dovetail Adaptor (TRIX160) 1 624025 Vacuum Set for TRIX160 Rig 1 622220 Quick Release Connector Bolts 1 172710 Portable Water Supply Unit 1 622020 Extension Rod 1/2” x 300mm 1 622070 Extension Rod 1 1/4” x 400mm 1 172770 Kit with 5 Copper Rings 1



DIAMOND DRILLING AND CUTTING RANGE

CLASS M - WET AND DRY VACUUM

Accessories 620911 PE Vacuum Dust Bags 5 Pack 620922 Dust Bags (Pack of 3) 1 644004 5m antistatic hose 1 644006 2 sets polyester filters 1 644030 Acessory Kit 1

DIAMOND CUTTING BLADES Item Code Diameter (mm) Description Pack Qty

GC127LS 125 Diamond Blade 125mm Segmented 1 GC152TS 150 Diamond Blade 150mm Turbo 2 GC127TS 125 Diamond Blade 125mm Turbo 1

CUT OFF WHEELS

Item Code Diameter (mm) x Bore (mm) Description Pack Qty

CW115SU 115 x 1.0 Cutoff Wheel-Steel INOX 25 CW125SU 125 x 1.0 Cutoff Wheel-Steel INOX 25

NOTES:

Item Code Description Power Max. Airflow Max. Water Column Depression Pack Qty

RV1632M 35L Class M Vacuum 1600W 75 L/S 280 mbar 1

for use with D3 Dust Extracting Carbide Drills & Diamond Cutting Equipment



POWER TOOLS AND ACCESSORIESLITHIUM-ION CORDLESS RANGE

18V Cordless Rotary Hammer

Features & Benefits• New brushless motor with electronic protection

delivers corded performance.• Delivers 2.6J of impact energy for superior drilling

and chiselling performance.• Equipped with Kickback control for improved

operator safety.

• Electronic precision control for better tool handling.• Enhanced anti-vibration system provides maximum

operator comfort.• This versatile tool provides rotary hammer, hammer

only and rotary only functions.• Large capacity 18V 6.0Ah battery pack delivers

superior run time.

DescriptionThe powerful Brushless 18V Cordless DynaDrill™ Rotary Hammer delivers exceptional concrete drilling performance.

Item Code Impact Force Max Drill Dia Vibration Carbide Pack Qty

DD518 2.6J 26mm 13 m/s2 R3 Plus & U3 Plus 1

18V Cordless Hammer Drill / Driver

Features & Benefits• New Brushless motor delivers 75Nm of torque• Equipped with Kickback control for

improved operator safety.

• Robust 13mm full metal chuck.• Electronic motor protection prevents

overload damaging the tool.• Integrated LED light for working in dark spaces.

DescriptionA powerful combination tool for high torque drilling, screwdriving and percussion drilling.

Item Code Max. Torque Max Drill Dia (Steel) Torque Settings Vibration Pack Qty

CBHDD18 128Nm 13 25+1 12.5 m/s2 1

BRUSHLESS MOTOR

18V Cordless Angle Grinder

Features & Benefits• New Brushless motor delivers benchmark angle

grinder performance.• Electronic Motor Protection prevents tool

overload and ensures long life.• Tool is equipped with kickback stop, fast brake

and restart protection for operator safety.

• Soft start motor with more power & longer runtime.

• Auxiliary handle can be used on right or left of tool.

• Adjustable anti-rotation protective guard.

DescriptionBrushless 5” (125mm) cordless angle grinder ideal for a variety of cutting and finishing jobs on the building site.

Item Code Max Speed Max Disc Dia Vibration Pack Qty

CBAGR18 9000rpm 115mm 6 m/s2 1


BRUSHLESS MOTOR

BRUSHLESS MOTOR


LITHIUM-ION CORDLESS RANGE

18V Cordless Impact Wrench

Features & Benefits• Unique bit holder combines ¼”

Hexagon & ½” Square for the most versatile impact tool on the jobsite.

• New brushless motor delivering high torque from a compact tool design.

• Torque pre-selection to avoid over tightning when working with different applications & materials.

• Best power to weight performance in its class.• 3 LED lights for working in dark spaces.• 3 different power settings for working

with different applications & materials.• Advanced motor delivers long tool lifetime

and higher efficiency per battery charge.

DescriptionThe Ramset™ Brushless Impact Driver / Wrench combination tool delivers incredible versatility on the job site.

Item Code Drive Shank Max. Torque Vibration Pack Qty

CBIWR18 1/2”” Sq. 170Nm 13.5 m/s2 1

1/4” Hex. 180Nm

18V Cordless ChemSet™ Applicator

Features & Benefits• Variable speed trigger for enhanced control• Anti-Drip mechanism instantly stops material

dripping upon trigger release

• Six position adjustable speed control• Robust, all metal gear system• Class leading dispensing performance

DescriptionThe powerful Ramset R18 Lithium Ion applicator is ideal for effortless dispensing of all Ramset Chemical injection products.

Item Code Max Disp Rate Max Disp Force Pack Qty

CUAR18 533ml / min 430kg 1


BRUSHLESS MOTOR



LITHIUM-ION CORDLESS RANGE

* While stocks last

NOTES:

18V Batteries & Chargers to suit R18 Range


CBATR18HD5 18V Battery 5.0Ah 1

CCR18 18V Battery Charger 1

CKITBAG Cordless Tool Bag 1

Impact SocketsItem Code Driver Type Pack Qty

ISD12010 10mm Long Impact Socket 1







ramsetreid Mechanical Anchors are manufactured to our high quality standards to ensure maximum confidence the product is fit for purpose and will meet the designers load requirements.

The ramsetreid Mechanical Anchoring range consists of:

• Xtrem™ Seismic Anchors

• Boa™ Coil Expansion Anchor

• TruBolt™ Stud Anchors

• AnkaScrew™ Screw In Anchors

• DynaBolt™ Sleeve Anchors

• TruFast™ Push Pull Suspension Anchor

• DynaSet™ Drop-In Anchor

• Electrical and Plumbing Fixture Suspension Anchors

mechanical anchoring


MECHANICAL ANCHORING

l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last


XTREM™ ANCHORING FOR DESIGN SPECIFICATIONSpaTecTM Plus SAFETY ANCHORS Item Code Drilled Hole Dia ø (mm) Anchor Length (mm) x Thread Size (mm) Pack Qty

l SP10105 15 105 x M10 25u SP10110SS** 15 110 x M10 25l SP12105 18 105 x M12 25l SP12120 18 120 x M12 25u SP12120SS** 18 120 x M12 25l SP16145 24 145 x M16 10l SP20170 28 170 x M20 5** Available to order. Lead times apply.

TruBoltTM XtremTM Stud Anchors - Hex Nut - Zinc Plated

Part No.Thread

Size

Anchor Length (mm)

Max Fixture

Thickness (mm)

Drilled Hole Ø (mm)

Min Hole Depth (mm)

Max Torque (Nm)

Fixture Hole Ø (mm)

Pack Qty

T10085X M10 85 5 10 80 45 12 50

T12105X M12 105 10 12 95 60 14 25

SammyTM Seismic Approved Suspension Anchor

Item Code Thread Size Drilled Hole Dia ø (mm) Hole Depth Pack Qty

8173957 M10 6.5mm 37mm 25

Socket to suit M10 Sammys. CODE: 8113190

TapconTM Seismic Anchor Item Code Anchor Size Drilled Hole Dia ø (mm) Fixture Hole Ø Pack Qty

3511407 8mm 6.5mm 8.5mm 15

TruBoltTM Xtrem Stud Anchors - Hex Nut - Zinc Plated

Part No. Thread

Size

Anchor Length (mm)

Max Fixture Thickness

(mm)

Drilled Hole Ø (mm)

Min Hole Depth (mm)

Max Torque (Nm)

Fixture Hole Ø (mm)

Pack Size

T08075X M8 75 15 8 60 20 9 100

T10100X M10 100 20 10 80 45 12 25

T10120X M10 120 40 10 80 45 12 25

T12115X M12 115 20 12 95 60 14 25

T12135X M12 135 40 12 95 60 14 25

T12180X M12 180 85 12 95 60 14 20

T16145X M16 145 25 16 120 110 18 10

T16170X M16 170 50 16 120 110 18 10

T20170X M20 170 30 20 140 160 22 10

T20200X M20 200 60 20 140 160 22 10



TruBoltTM STUD ANCHORS Part No. Thread Size Anchor Drilled Hole Ø Max Fixture Fixture Min Hole Effective Pack Qty Length (mm) (mm) Thickness (mm) Hole Ø (mm) Depth (mm) Length (mm)

l T12080 M12 80 12 6 15 90 58 20n T12080GH M12 80 12 6 15 90 58 20l T12100 M12 100 12 25 15 105 71 20n T12100GH M12 100 12 25 15 105 71 20l T12120 M12 120 12 45 15 105 93 20l T12140 M12 140 12 65 15 105 111 20n T12140GH M12 140 12 65 15 105 111 20n T12180GH M12 180 12 100 15 125 151 20l T16110 M16 110 16 8 19 125 67 20n T16110GH M16 110 16 8 19 125 67 20l T16125 M16 125 16 20 19 135 85 20n T16125GH M16 125 16 20 19 135 85 20l T16150 M16 150 16 45 19 145 110 20n T16150GH M16 150 16 45 19 145 110 20l T16175 M16 175 16 70 19 145 135 20n T16175GH M16 175 16 70 19 145 135 20l T20140 M20 140 20 10 24 160 85 10n T20140GH M20 140 20 10 24 160 85 10l T20160 M20 160 20 35 24 170 115 10n T20160GH M20 160 20 35 24 170 115 10l T20215 M20 215 20 90 24 200 170 10n T20215GH M20 215 20 90 24 200 170 10


TruBoltTM Stud Anchors - Hex Nut - Stainless Steel

RamsetPart No

Thread Diameter

DrillDiameter

Totalanchorlength

Hole depth minus fixture

thickness

Minimum Drilling depth

Maximum fixture

thickness

Maximum tightening

Torque

Fixture clearance

hole diameter

Pack Qty

T08055SSA ø8 ø8 55mm 70mm 65mm 5mm 20Nm ø9 100















HEAVY DUTY ANCHORING

NOTES:



Boa™ Coil ANCHORS - COMPLETE Item Code Anchor Size Anchor Length (mm) Pack Qty

l BAC08075 1/2”/13 mm 75 50l BAC08100 1/2”/13 mm 100 25l BAC10090 5/8”/16 mm 90 25l BAC10125 5/8”/16 mm 125 25l BAC12115 3/4”/19 mm 115 10

BoaTM Coil ANCHORS - COIL ONLY Item Code Anchor Size Pack Qty

l BAC08 1/2”/13 mm 100l BAC10 5/8”/16 mm 100l BAC12 3/4”/19 mm 50

HEAVY DUTY ANCHORING



MEDIUM DUTY ANCHORING

WERCS™ AnkaScrew™ ANCHORS Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Socket Pack Qty Size Length(mm) (mm) Thickness (mm) (mm) Size (mm)

l AS06050W 6 50 6 20 8 10 50t AS06050WGM 6 50 6 20 8 10 50l AS06075W 6 75 6 45 8 10 50t AS06075WGM 6 75 6 45 8 10 50l AS06100W 6 100 6 70 8 10 50t AS06100WGM 6 100 6 70 8 10 50l AS08060W 8 60 8 20 10 13 50t AS08060WGM 8 60 8 20 10 13 50l AS08075W 8 75 8 35 10 13 50t AS08075WGM 8 75 8 35 10 13 50l AS08100W 8 100 8 60 10 13 50t AS08100WGM 8 100 8 60 10 13 50l AS10060W 10 60 10 10 13 15 25t AS10060WGM 10 60 10 10 13 15 25l AS10075W 10 75 10 25 13 15 25t AS10075WGM 10 75 10 25 13 15 25l AS10100W 10 100 10 50 13 15 25t AS10100WGM 10 100 10 50 13 15 25l AS12075W 12 75 12 15 15 16 25t AS12075WGM 12 75 12 15 15 16 25l AS12100W 12 100 12 40 15 16 20t AS12100WGM 12 100 12 40 15 16 20l AS12150W 12 150 12 90 15 16 20t AS12150WGM 12 150 12 90 15 16 20

l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised

AnkaScrewTM Screw-In ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)

l AS05030 5 x 30 Flanged Hex Head (Zinc plate) 100l AS16115 16 x 115 Flanged Hex Head (Zinc plate) 10l AS16160 16 x 160 Flanged Hex Head (Zinc plate) 10

DynaBoltTM ANCHORS HEX BOLT Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l DP08045H M6 45 8 15 10 100u DP08045HSS M6 45 8 15 10 100l DP10045H M8 45 10 8 12 50u DP10045HSS M8 45 10 8 12 50l DP10055H M8 55 10 20 12 50u DP10060HSS M8 60 10 20 12 50l DP10080H M8 80 10 30 12 50u DP10080HSS M8 80 10 30 12 50u DP10105HSS M8 105 10 60 12 25l DP12065H M10 65 12 15 15 25l DP12075H M10 75 12 20 15 25u DP12075HSS M10 75 12 20 15 25




DynaBoltTM ANCHORS - Hex Nut Zinc Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l D6026 M4.5 26 6 3 8 100l DP06040 M4.5 38 6 12 8 100u DP06040SS M4.5 38 6 12 8 100l DP06060 M4.5 57 6 30 8 100u DP06060SS M4.5 57 6 30 8 100l DP08040 M6 40 8 6 10 100u DP08040SS M6 40 8 6 10 100l DP08065 M6 66 8 25 10 50u DP08065SS M6 66 8 25 10 50l DP08090 M6 92 8 50 10 50l DP10040 M8 41 10 3 12 50n DP10040GH M8 41 10 3 12 50l DP10050 M8 49 10 20 12 50n DP10050GH M8 49 10 20 12 50u DP10050SS M8 49 10 20 12 50l DP10075 M8 76 10 30 12 50n DP10075GH M8 76 10 30 12 50u DP10075SS M8 76 10 30 12 50l DP10100 M8 103 10 50 12 25n DP10100GH M8 103 10 50 12 25u DP10100SS M8 103 10 50 12 25l DP10125 M8 124 10 80 12 25l DP12060 M10 55 12 10 15 25n DP12060GH M10 55 12 10 15 25u DP12060SS M10 55 12 10 15 25l DP12070 M10 70 12 15 15 25n DP12070GH M10 70 12 15 15 25u DP12070SS M10 70 12 15 15 25l DP12100 M10 98 12 45 15 20n DP12100GH M10 98 12 45 15 20u DP12100SS M10 98 12 45 15 20l DP12125 M10 126 12 70 15 20n DP12125GH M10 126 12 70 15 20l DP16065 M12 62 16 6 19 20n DP16065GH M12 62 16 6 19 20l DP16110 M12 106 16 35 19 10n DP16110GH M12 106 16 35 19 10l DP16140 M12 140 16 65 19 10n DP16140GH M12 140 16 65 19 10l DP20080 M16 81 20 8 24 10l DP20115 M16 113 20 25 24 5l DP20160 M16 157 20 70 24 5

DynaBoltTM ANCHORS - Flat Head Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l D6034F M4.5 34 6 10 8 100l DP06060F M4.5 60 6 30 8 100u DP06060FSS M4.5 60 6 30 8 100l DP06075F M4.5 75 6 45 8 100l DP06100F M4.5 100 6 70 8 100l DP08060F M6 60 8 20 10 100l DP08085F M6 85 8 45 10 50l DP10075F M8 75 10 30 12 50l DP10100F M8 100 10 55 12 50l DP10125F M8 125 10 80 12 25





DynaBolt™ Special Part No. Bolt Thread Anchor Length Drilled Hole Ø Pack Qty Style Size (mm) (mm)

l D06026S Set Lok M4.5 26 6 500l D08045K Hook Bolt M6 47 8 100l D08045X Eye Bolt M6 47 8 100

Counter Sunk

DynaBolt™ Decorative Post Heads Part No. Head Thread Overall Length Pack Qty Style Size (mm)

u DF045SS Countersunk M4.5 23 100u DF06SS Countersunk M6 23 100u DF08SS Countersunk M8 27 100

Set Lok

HookEye

DynaSetTM Drop-In anchors Item Code Description Pack Qty

RAP01 Elect. Mech. Services Pk(500 x DSF10 + set tool) 500

DynaSet™ Drop-In anchors Part No. Thread Thread Anchor Length Drilled Hole Ø Pack Qty Size Length(mm) (mm) (mm)

l DSM08 M8 13 30 10 100l DSF10 M10 14 30 12 50l DSM10 M10 16 40 12 50l DSM12 M12 21 50 16 50l DSM16 M16 28 65 20 25l DSM20 M20 35 80 25 25


DynaSetTM SETTING TOOLS Item Code To Suit Dynaset Pack Qty

SETDS2 DSM08/DSM08SS 1 SETDF3 DSF10 1 SETDS3 DSM10/DSM10SS 1 SETDS4 DSM12/DSM12SS 1 SETDS5 DSM16/DSM16SS 1 SETDS6 DSM20 1



ShureDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l SDM05022 5 22 100l SDM06030 6 30 100u SDM06030SS 6 30 100l SDM06050 6 50 100

ELECTRICAL SUPPORT FIXINGS Item Code Capacity (mm) Type Pack Qty

CHLD Cable bundles Cable Holder + Anchor 50 DK20 16 - 20 Dynaclip 100 DK32 25 - 32 Dynaclip 100 VF1 1.6 - 2.5 Vertical Flange Clip 100

RamPlugsTM - STANDARD Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

DNP05 5 25 100 DNP06 6 30 100 DNP08 8 40 100 DNP10 10 50 50

RamPlugsTM - LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

DLP08 8 80 100 DLP10 10 80 50

RamPlugsTM - ULTRA LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l DUP10080H 10 80 25l DUP10100H 10 100 25l DUP10135H 10 135 25

LIGHT DUTY ANCHORINGTRUFAST™ PUSH-PULL ANCHORSItem Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l TFE06 6 55 100l TFE06120 6 120 100





NOTES:

NYLON ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)

l TNM325 5 x 25 Mushroom 100l TNR325 5 x 25 Round 100l TNR338 5 x 38 Round 100l TNM425 6.5 x 25 Mushroom 100l TNR425 6.5 x 25 Round 100l TNM438 6.5 x 38 Mushroom 100l TNM450 6.5 x 50 Mushroom 100l TNM475 6.5 x 75 Mushroom 50

EasyDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l ED05033 5 33 100u ED05033SS 5 33 100l ED05050 5 50 100l ED06042 6 42 100u ED06042SS 6 42 100l ED06055 6 55 100u ED06055SS 6 55 100l ED06075 6 75 100u ED06075SS 6 75 100

PLASTIC PLUGS (FRAME PACKS) Item Code Length (mm) x Drill Size (mm) Colour Pack Qty

WPGR25 25 x 7 Green 1000 WPGR38 38 x 7 Green 500 WPGR50 50 x 7 Green 500

LIGHT DUTY ANCHORING



HOLLOW WALL ANCHOR Item Code Thread Size Wall Thickness (mm) Pack Qty

HW05M4 M4 Up to 5 100 HW10M4 M4 6 – 10 100 HW13M4 M4 8 – 13 100 HW24M4 M4 16 - 24 100 HW14M5 M5 7 – 14 100 HW16M6 M6 6 – 16 100

HOLLOW WALL ANCHOR SETTING TOOL Item Code Description Pack Qty

SETHWG Hand Setting Tool - Gun 1

WallMateTM

Item Code Screw Gauge x Wall Thickness (mm) Pack Qty Min. Screw Length (mm)

WMZ 8 x 20 10 – 12 100 WM25 6 - 8 x 20 10 – 12 100

WMZ WM25


CONCRETE NAILSPart No Description Shank Ø (mm) Overall Length (mm) Order Qty

CW415Q500 Washered 2.4 15 500CW420Q500 Washered 2.4 20 500CW425Q500 Washered 2.4 25 500CW430Q500 Washered 2.4 30 500CF675 Plain 3.8 75 100

CW - Washered

LIGHT DUTY ANCHORING



chemical anchoring

ramsetreid Chemical Anchors are approved for installation in challenging site conditions such as water immersion, to provide long term reliable service.

The ramsetreid Chemical Range Consists of:

• Epcon C8 Xtrem Seismic Performance Epoxy Anchor

• ChemSet Reo 502 Plus Epoxy Chemical Anchor

• ChemSet 801 Xtrem High Productivity Chemical Anchor

• ChemSet 101 Plus Polyester Chemical Anchor

• ChemSet Anchor Studs

• Internal Threaded Anchor Inserts

• ChemSet Installation Accessories

CHEMICAL ANCHORING


CHEMICAL ANCHORING

UltraFixTM Plus Polyester Anchoring Adhesive (Standard Caulking Gun) Item Code Description Pack Qty

UFP300P UltraFix™ Plus 300 ml 12

ChemSetTM 101 Plus Styrene Free Polyester Anchoring Adhesive Item Code Description Pack Qty

ISKP ChemSet™ 101 Plus Kit* 10 C101J ChemSet™ 101 Plus Jumbo (750ml) + 2 x Mixer Nozzle 12 C101C ChemSet™ 101 Plus Cartridge (380ml) + 2 x Mixer Nozzle 20 ISNE Mixer Nozzle for ChemSet™ 101 Plus 5* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles

ChemSet™ 801 Xtrem™ XC² Heavy Duty Vinyl Ester Anchoring Adhesive Item Code Description Pack Qty

C801X380 ChemSet™ 801 Xtrem™ Cartridge (380ml) + 2 x Mixer Nozzle 20 C801X750 ChemSet™ 801 Jumbo (750ml) + 2 x Mixer Nozzle 12 ISNE Mixer Nozzle for ChemSet™ 801 Xtrem™ 5

ChemSetTM Reo502TM PLUS Heavy Duty Epoxy Anchoring Adhesive Item Code Description Pack Qty

REO502P600 ChemSet™ Reo502™ Plus (600ml) + Mixer Nozzle 15 ISNE Mixer nozzles for Reo502™ Plus 5 S055837 Mixer nozzles for Reo502™ Plus Hi Flo 10

EPCON™ C8 Epoxy XTREM™ Anchoring adhesive Item Code Description Pack Qty

C8-450 EPCON C8 Epoxy (450ml ) with mixer nozzle 12 E108 Applicator tool (450ml ) for EPCON C8 1 ISNE Epoxy mixer nozzle for EPCON C8 5

NOTES:

CHEMICAL ANCHORING


ChemSetTM MaximaTM Anchoring Capsules Item Code Anchor Size (mm) Pack Qty

CHEM10 M10 10 CHEM12 M12 10 CHEM16 M16 10 CHEM2024 M20 & M24 6

ChemSetTM Nylon Sleeves for Hollow Masonry Anchoring with ChemSetTM 101 Plus Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)

ISS08 64 x 12 M8 100 ISS10 64 x 14 M10 100 ISS12 64 x 16 M12 100

ChemSetTM Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSetTM 101 Plus Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)

ISM12 1000 x 16 M10/M12 1 ISM16 1000 x 22 M16 1

ChemSetTM CAPSULES

NOTES:


CHEMICAL ANCHORING

ChemSetTM STUDS

ChemSetTM ANCHOR STUDS Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty

n CS08110GH 8 110 x M8 10u CS08110SS 8 110 x M8 10n CS10130GH 10 130 x M10 10u CS10130SS 10 130 x M10 10l CS12160 12 160 x M12 10n CS12160GH 12 160 x M12 10u CS12160SS 12 160 x M12 10l CS16190 16 190 x M16 10n CS16190GH 16 190 x M16 10u CS16190SS 16 190 x M16 10l CS20260 20 260 x M20 6n CS20260GH 20 260 x M20 6u CS20260SS 20 260 x M20 6l CS24300 24 300 x M24 6n CS24300GH 24 300 x M24 6u CS24300SS 24 300 x M24 6

Threaded Inserts - Internally Threaded Anchors Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty

l 062770* 8 60 x M8 10u 062860 8 60 x M8 10l 062480 10 65 x M10 10u 062960 10 65 x M10 10l 062760 12 75 x M12 10u 063100 12 75 x M12 10l 062800 16 125 x M16 10u 051175 16 125 x M16 10l 062810 20 170 x M20 10

NOTES:

l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised

CHEMICAL ANCHORING


ChemSetTM SYSTEMS APPLICATORS Item Code Description Pack Qty

CUAP Chemset™ Universal Applicator* 1 E108 Applicator 450ml Epcon C8 1*For dispensing ChemSet™ 101 Plus, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges

ChemSetTM HOLE CLEANING ACCESSORIES Item Code Anchor Size (mm) Description Pack Qty

HCBT13 8 – 12 Brush 1 HCBT20 16 - 20 Brush 1 HCBT26 20 - 24 Brush 1 HCBT201000 16 - 20 1 m long Brush 1 HCBT261000 20 - 26 1 m long Brush 1 HCBT361000 27 - 36 1 m long Brush 1 HCBT421000 37 - 42 1 m long Brush 1 HCPHV - High Volume Dust Blower 1For cleaning dust from holes in concrete

ChemSetTM Anchoring Kit Item Code Description Pack Qty

CHEMKITBAG Tool bag, CUAP, HCPHV,HCBT13,HCBT20,HCBT26 1

APPLICATORS AND ACCESSORIES

NOTES:

ramsetreid Construction Chemicals covers all the essential onsite products to finish off your project. The construction chemical range includes:

• Acrylic and Polyurethane sealants for interior and exterior applications

• Construction adhesives

• Expanding polyurethane foams

• Fire rated foam and sealant

• Epoxy repair mortar and grout.

• Concrete additives for render and remedial work.

construction chemicals


SEALANTS Item Code Colour Pack Size Carton Qty

ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE RFSLTRG300 Translucent 300 ml 20 RFSLALG300 Aluminium 300 ml 20

WATER SEAL ACETIC CURE SANITARY SILICONE WRSLWHG300 White 300 ml 20

GAP SEAL PAINTABLE GAP SEALANT GPSLWHG450 White 300 ml 20

BlazeBrake™ ACRYLIC FIRE RATED SEALANT BLBRGYC Grey 300 ml 20 BLBRGYS Grey 600 ml 15

BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS Item Code Description Pack Qty

CAGU300 Caulking Gun for 300ml Cart. 1

POLYETHYLENE CLOSED CELL FOAM BACKER ROD Item Code Colour Diameter (mm) Length (m)

PFROD06 White 6 250 PFROD10 White 10 250 PFROD13 White 13 50 PFROD15 White 15 50 PFROD20 White 20 50 PFROD25 White 25 50 PFROD30 White 30 50 PFROD40 White 40 2 PFROD50 White 50 2

CONSTRUCTION CHEMICALS



SAFE-T-BONDTM Water Clean Up Construction Adhesive

Item Code Description Pack Size Carton Qty

STBDL1 1 L Sachet 1 Litre 10

RamsetTM FomofillTM Self-Expanding Gap Filling Foam Item Code Description Pack Size Carton Qty

FMFLG500 Fomofill™ 500 ml 12 FMFLG750 Fomofill™ 750 ml 12

FomoPlusTM Applicator Foam Item Code Description Carton Qty

FMPLG750 Fomoplus™ 750 ml Canister 12 FMPLGU* Fomoplus™ Applicator Gun 1 FMPLGU300 Fomoplus™ Applicator Gun Metal 1

FomoTM Aerosol Solvent Cleaner for FomoPlusTM Applicators Item Code Description Pack Size Carton Qty

FMSVM500 Fomo™ Solvent 500 ml 12


ADHESIVES

FIRE RATED EXPANDING PU FOAM Item Code Size Description Carton Qty

FRF700 750 ml BlazeBrake™ FR Foam 12Consult technical data for tested applications and fire ratings before commencing use. Go to www.ramset.com.au


Epoxy Paste 1210 - Epoxy Repair Compound for Concrete

Item Code Colour Pack Size Carton Qty

EP1210L4 Grey 4 litre 1 EP1210L20 Grey 20 litre 1

Epoxy Grout 7042 - Epoxy Grouting Compound, Standard Cure and Low Exotherm (Deep Pour)

Item Code Colour Pack Size Carton Qty

EP7042L3 Grey Standard 3 litre 1 EP7042L13 Grey Standard 13 litre 1 EP7042LEL3** Grey Deep Pour 3 litre 1 EP7042LEL13** Grey Deep Pour 13 litre 1

CEMENTITIOUS GROUTS Item Code Description Pack Size Qty

RPGMP Premier Grout MP 20kg 1

CONCRETE ADDITIVES Item Code Description Pack Size Qty

CemCrete™ Bonding and Sealing Agent CMCRL5 Cemcrete™ 5 litre 1 CMCRL20* Cemcrete™ 20 litre 1


CONCRETE REPAIR

NOTES:

"**Subject to lead time"


Reinforcing products from ramsetreid provide simple solutions for structural concrete connection, reducing both labour and material costs.

Our offer in this category includes:

• Reinforcing continuity system for jump form construction: ReidBar Poly Board ReidBox™ and Rebox™

• ReidBar™ components and their accessories

• ReidBar™ Bracing Solutions

reinforcing solutions


Poly Board Description

Dimensions (mm)

Number of Bar Rows

Max Bar QuantityRebate

DepthWidth Length Bar Size

Threaded Insert

Fitting Increments

90 x 1000 PolyBoard

30 90 1000

RBA12 RB12TI 50 or 100 1 10

RBA16 RBA16TI 50 or 100 1 10

RBA20 RBA20TI 100 1 10

RB25 RB25TI 100 1 10

150 x 1000 PolyBoard

30 150 1000RBA12 RB12TI 50 or 100 1 to 3 19

RBA16 RB16TI 50 or 100 1 to 3 38

180 x 1000 Polyboard

30 180 1000RBA12 RB12TI 50 or 100 1 to 3 19

RBA16 RB16TI 50 or 100 2 to 3 38

ReidBar Poly Board Recommended Configurations

| Reinforcing Solutions ReidBar™ Poly Board


ReidBar™ POLY BOARD CONNECTION SYSTEM

Rebate depths: 30mm, 40mm

Lengths: 900mm, 1000mm, 1100mm, 1200mm

Widths: 90mm, 150mm, 180mm, 200mm, 225mm, 230mm, 250mm, 300mm

Fitting Sizes: 12mm, 16mm, 20mm, 25mm, 32mm

Bar Spacings: At centres nominated by designer Jacking Nuts and Screw Holes

*additional lead time applies

Other Configurations Available Using the Following Sizes*

Length

SpacingWidth

Rebate depth

Key to ReidBar Poly Board Dimensions

ReidBar Poly Board Connection System is the simplest way to place ReidBar™ fittings quickly and accurately, and can be re-used many times in concrete pours. With features such as nail holes, jacking nuts, and chamfered edges, placement and stripping is a breeze. Reid™ Rebate Board Connection System is ideal for applications with plenty of repetitions, such as for typical levels on a jump form construction.

| Reinforcing Solutions ReidBox™


ReidBox™ CONNECTION SYSTEMReidBox™ provides an economical rebate solution using ReidBar™ fittings for in-situ and precast/tilt-up construction, including floor and wall connections. The ReidBox™ system comprises of a plastic rebate former with removable orange plastic lid that seals the ReidBox™ when placed against the formwork, and allows easy access for stripping. The ReidBar™ fittings are secured to the ReidBox™ using ReidBar™ nailing plates, and all components are designed as consumables for single use.

Product Codes

Part Number

Dimensions (mm)Anchorage Type

Bar Size

Bar QuantityMinimum Wall

ThicknessFitting Spacing

Nominal Embedment

16mm: Threaded Insert

RBP100IRBA165150 200 150 148 Headed RBA16 5






RBP100IRB254200 260 200 221 Headed RB25 4


RBP100IRB325150 270 150 240 Headed RB32 5

RBP100IRB324200 270 200 240 Headed RB32 4

Standard Dimensions: Rebate Length: 700mm Rebate Width: 100mm Rebate Depth: 30mm

NOTES:

| Reinforcing Solutions ReBox™


Product Codes

ReBox™ PULL OUT BOX CONNECTION SYSTEMReid™ Rebox™ System is manufactured from pre-bent Grade 500 N TEMPCORE reinforcement bars neatly packed and sealed inside a dimpled galvanised steel rebate box with smooth close-fitting galvanised lid.The Reid™ Rebox™ is easily attached to formwork and/or the reinforcing cage. After the concrete has been poured and the formwork stripped, the design of the Rebox™ allows for easy opening of the unit and access to the reinforcement bars ready for deployment.

Part NumberBar Size

Cog Type

Dimensions (mm)Bar QuantityHorizontal

Bar SpacingVertical Bar Spacing (C2)

Anchorage Length (L2)

Rebate Width (W1)

Rebate Depth (W2)

RBX120UN1205200 N12 U 200 90 - 120 38 5

RBX140UN1205200 N12 U 200 120 - 140 38 5

RBX170UN1205200 N12 U 200 140 - 170 38 5

RBX190UN1205200 N12 U 200 160 - 190 38 5

Standard Dimensions: Rebate Lenght: 1000mm Nominal Concrete Wall Thickness: >150mm Leg Length (L1): 450mm Average Bar Embedment: 130mm

L1L2

L3

W1

W2W2

L1L2

C2

W1

Rebox™ Type

TYPE “U” BOX TYPE “L” BOX

HOW TO SPECIFY E.g RBX140UN1205200

NOTES:

Other configurations available on request and subject to leadtimes

Part Number Description Length (mm) Hex A/F (mm) Pack Size

RB12M16CG 12mm ReidBar to 16mm metric bar coupler Galvanised 90 25 70

RBA16M20CG 16mm ReidBar to 20mm metric bar coupler Galvanised 102 30 50

RBA20M24CG 20mm ReidBar to 24mm metric bar coupler Galvanised 119 38 20

ReidBar to Metric CouplerUtilised to couple ReidBar with metric starter bar.

| Reinforcing Solutions ReidBar™ System


ReidBar™SYSTEM & COMPONENTS

ReidBar™ is a 500N grade reinforcing bar complying with AS/NZS 4671:2001 that can be cut at any point along its length and screwed into the following threaded components.

Part Number Description Length (mm) Pack Qty

RB12SB Starter bar for RB12 fittings 540 20

RBA16SB Starter bar for RBA16 fittings 660 20

RBA20SB Starter bar for RBA20 fittings 850 10



ReidBar™ StartersReidBar™ starter bar systems have been developed to provide full strength and positive connections between precast concrete panels, floor slabs and insitu suspended floors.

ReidBar™ CouplerSystem to couple two ReidBar™ together. Commonly utilised for wet joints and panel to panel applications.

(A)

(B)

*Lead time applies for Hot Dip Galvanised components

Cut to length available and subject to leadtimes

Part No. DescriptionOuter Diameter (A) (mm)

Length (B) (mm)

Hex A/F (mm) Pack Qty

RB12C ReidBar Coupler for RB12 22 90 25 70

RBA16C ReidBar Coupler for RBA16 30 102 30 45

RBA20C ReidBar Coupler for RBA20 33 129 36 20



RB12CG* ReidBar Coupler for RB12 (Gal) 22 90 25 70

RBA16CG* ReidBar Coupler for RBA16 (Gal) 30 102 30 45

RBA20CG* ReidBar Coupler for RBA20 (Gal) 33 129 36 20



Part No. Description Length (mm) Hex A/F Hex A/C Pack Qty

RB12N ReidBar Nut for RB12 40 25 25 140

RBA16N ReidBar Nut for RBA16 45 30 34 50

RBA20N ReidBar Nut for RBA20 45 36 42 25

RB25N ReidBar Nut for RB25 65 46 53 30

RB32N ReidBar Nut for RB32 82 55 63.5 15

RB12NG* ReidBar Nut for RB12 (Gal) 40 25 25 50

RBA16NG* ReidBar Nut for RBA16 (Gal) 45 30 34 50

RBA20NG* ReidBar Nut for RBA20 (Gal) 45 36 42 25

RB25NG* ReidBar Nut for RB25 (Gal) 65 46 53 30

RB32NG* ReidBar Nut for RB32 (Gal) 82 55 63.5 15

ReidBar™SYSTEM & COMPONENTS



ReidBar™ InsertsSystem to anchor ReidBar™. Commonly utilised for floor to wall or floor to panel connections.

(A)

(B)


ReidBar™ NutSystem to fix and/or tighten ReidBar™.


NOTES:

Part No. DescriptionFoot Diameter (A) (mm)

Length (B) (mm)

Cross Hole Diameter (mm)

Pack Qty

RB12TI ReidBar Insert for RB12 38 100 N/A 60

RBA16TI ReidBar Insert for RBA16 50 118 N/A 30

RBA20TI ReidBar Insert for RBA20 64 148 N/A 10



RB12TIG* ReidBar Insert for RB12 (Gal) 38 100 N/A 60

RBA16TIG* ReidBar Insert for RBA16 (Gal) 50 118 N/A 30

RBA20TIG* ReidBar Insert for RBA20 (Gal) 64 148 N/A 10



RB12RI ReidBar Rebate Insert for RB12 39 78 14.5 60

RBA16RI ReidBar Rebate Insert for RBA16 51 96 14.5 30



Part Number Description Dimensions (mm) Pack Quantity

BPLATE20100G* ReidBar Domed Base Plate for RBA16/20 (Gal) 100 x 100 x 6.3 x 14 High 50

RBA20SWG* ReidBar Spherical Washer for RBA16/20 (Gal) 50 OD x 24 ID x thick 100

BPLATE32150G ReidBar Domed Base Plate for RB25/32 (Gal) 150 x 150 x 10 x 24 High 1

RB32SWG ReidBar Spherical Washer for RB25/32 (Gal) 70 OD x 37 ID x 24 thick 50

20FSW ReidBar F/Washer For RBA20 (Gal) 50 x 50 x 3 x 25 hole 1

System for ground anchoring.

ReidBar™ HDG Domed Plates & Spherical Washers*

*While stocks last

NOTES:

| Reinforcing Solutions ReidBar™ Accessories


ReidBar™ ACCESSORIES

ReidBar™ fittings are accompanied by various accessories that made their installation easier.

Part Number

Description SuitsPack Quantity

NP12RB Nailing Plate for RB12 (Orange) RB12TI, RB12C 100

NP16RB Nailing Plate for RBA16 (Orange) RBA16TI, RBA16C 100

NP20RB Nailing Plate for RBA20 (Orange) RBA20TI, RBA20C 100



ReidBar™ Nail PlatesMainly for attaching ReidBar™ Inserts and Couplers to timber formwork.

NOTES:

| Formwork and Bracing Systems ReidBar™ Formwork System


ReidBar™ FORMWORK SYSTEMReidBar™ is ductile and can accept tensile loads and shear loads. This makes it an ideal anchoring and formworking system for jump form construction.

Product Codes

Part Number

Description SuitsPack Quantity

FWCOND20 PVC Conduit 20mm ID x 3m RBA16 75

FWCOND25 PVC Conduit 27mm ID x 3m RBA20 75

FWCC20 Conduit Cone Small 20mm (for RBA16) RVT20 / RBA16 500

FWCC25 Conduit Cone Small 25mm (for RBA20) RVT20 / RBA20 500

RPLATE ReidBar Plate 150x100x6 RBA16, RBA20 1

RBA16WN ReidBar Wing Nut for RBA16 RBA16 30

Typical ReidBar™ formwork system.

PVC Conduit & Conduit Cone

R Plate

Form Work System

FWCC__

ReidBar™ Wing Nut

Part Number Description Hex A/F Height (mm)Overall Diameter (mm)

Pack Quantity

RB12WN ReidBar Wing Nut for RB12 22 40 58 100

RBA16WN ReidBar Wing Nut for RBA16 30 51 98 30

System to fix and/or tighten ReidBar™. Commonly utilised for formwork systems.

ReidBar™ Wing Nut

(FWCOND__)

Bar Size Finish Kit Code

12mm Galvanised RBRACE12-SET


20mm Galvanised RBRACE20-SET(A)



| Formwork and Bracing Systems ReidBrace™


ReidBrace™ ENGINEERED BRACE SYSTEM ReidBrace™ is an off-the-shelf system that provides design engineers and constructors with an economic solution for tension bracing of structures, tie-back applications and temporary works bracing. ReidBrace™ utilises ReidBar™, a user friendly continuously threaded reinforcing bar system, as tension members. This makes ReidBrace™ a unique system that is easy to install with minimum extra processes onsite.

ReidBrace™ Boxed Sets*

NOTES:

RBRACE end

Tension Spring

Half Nut

Full Nut

RBRACE

*Box sets avaiable in Mid 20-21. For sales of individual components please contact ramsetreid.

Boxed Set contents:

1. Reid Tension Spring

2. Reid Tab Washer

3. RBRACE Banana End

4. RBRACE-END

5. Half Nut & Full Nut

1

2

3

4

5

| RapidBrace Overview

installation guide | rapidbrace 3

Part No. Description Product Image Key

RVT20 Reid Void Tube 3m Length 1

RAPIDB RapidBrace Tripod and Spacer Disc 2a and 2b

RAPIDWN RapidBrace Wing Nut RB12 3

RAPIDF RapidBrace Foot For RB12 4

RB12N RB12 Nut 5

RB12SB RB12 ReidBar Starter Bar 6

LIFEGUARD 12-20 Life Guard Protective Cap 7

RapidBraceRapidBrace is a cast in solution primarily designed for fixing brace feet bracket of concrete wall panel braces in low strength concrete.The internally threaded Rapid Foot is cast into the floor along with the void tube, designed to accept RB12 ReidBar “bolt” to secure the brace feet bracket.

Features:• Safe, flexible and quick cast In

solution

• Full bar break connection in lowstrength concrete

• Reduce floor cycle times

• Fully tested to AS 3850.1:2015

• Use for bracing, handrails andsafety screens.

Rapid Brace Components

2a

2b

1

3

46 5

7

| Formwork and Bracing Systems RapidBrace


| RapidBrace Overview

installation guide | rapidbrace 3

Part No. Description Product Image Key

RVT20 Reid Void Tube 3m Length 1

RAPIDB RapidBrace Tripod and Spacer Disc 2a and 2b

RAPIDWN RapidBrace Wing Nut RB12 3

RAPIDF RapidBrace Foot For RB12 4

RB12N RB12 Nut 5

RB12SB RB12 ReidBar Starter Bar 6

LIFEGUARD 12-20 Life Guard Protective Cap 7

RapidBraceRapidBrace is a cast in solution primarily designed for fixing brace feet bracket of concrete wall panel braces in low strength concrete.The internally threaded Rapid Foot is cast into the floor along with the void tube, designed to accept RB12 ReidBar “bolt” to secure the brace feet bracket.

Features:• Safe, flexible and quick cast In

solution

• Full bar break connection in lowstrength concrete

• Reduce floor cycle times

• Fully tested to AS 3850.1:2015

• Use for bracing, handrails andsafety screens.

Rapid Brace Components

2a

2b

1

3

46 5

7

| Cast-in Metric Connection Systems Ferrules

Elephant Foot™ Ferrules


Item CodeThread Size x Thread Length (mm)

Ferrule Length (mm) Pack Qty

FE10045 M10 x 20 45 220

FE12055 M12 x 25 55 170

FE12055GH M12 x 25 55 170

FE12095 M12 x 25 95 100

FE12095GH M12 x 25 95 100

FE16070 M16 x 32 70 80

FE16070GH M16 x 32 70 80

FE16095 M16 x 32 95 65

FE16095GH M16 x 32 95 65

FE20070 M20 x 32 70 65

FE20070GH M20 x 32 70 65

FE20095 M20 x 38 95 50

FE20095GH M20 x 38 95 50

FE24095 M24 x 50 95 35

FE24095GH M24 x 50 95 35

Elephant Foot™ Ferrules - Stainless SteelFE10045SS M10 x 20 45 220

FE12055SS M12 x 25 55 170

FE16070SS M16 x 32 70 80

FE20095SS M20 x 45 95 50

Reid™ Stiletto™ Round Bar FerrulesFS16070 M16 x 32 70 50

FS16070GH M16 x 32 70 50

FS16095 M16 x 39 95 50

FS16095GH M16 x 39 95 50

FS20070 M20 x 32 70 50

FS20095 M20 x 39 95 50

FS20095GH M20 x 39 95 50

AccessoriesItem Code Description Thread Size Pack Qty

FM12N Nailing Plate - RED M12 100

FM16N Nailing Plate - GREEN M16 100

FM20N Nailing Plate - BLUE M20 100

FM24N Nailing Plate - YELLOW M24 100

FWSC125 Support Chair - 125mm 50




FSC25 Stiletto™ Ferrule Chair - 25mm 50



FSC100 Stiletto™ Ferrule Chair -100mm 50

All products zinc plated unless denoted by GH (Galvanised)

Part Number Description Finish Matching Ferrule

Fixture Thickness

Pack Quantity

ORB2016BGH OrbiPlate™ M16 Hot Dip Gal FE16095GH 6 – 12 mm 20

ORB2020BGH OrbiPlate™ M20 Hot Dip Gal FE20095GH 6 – 16 mm 20

| Cast-in Metric Connection Systems OrbiPlate™

OrbiPlate™OrbiPlate™ overcomes the major headache that comes with bolted cast-in connections, getting the holes to line up! The methods traditionally used to overcome this were time consuming, costly and often structurally inadequate.The patented OrbiPlate system is used when connecting steel to steel or steel to concrete elements and delivers connection tolerances of up to 20mm around the centre of the connection. It also provides the ability to achieve fine locational accuracy when positioning each steel member.

OrbiPlate is quick and easy to install. The steel member is supplied to site with a pre-formed hole (70mm), which can be punched or cut at the centre of the connection location. The main washer is then placed over the hole, rotated to locate the slot over the ferrule, then secured using the class 8.8 bolt through the small washer. The bolt can be positioned anywhere along the elongated slot, providing up to 20mm tolerance in all directions.

Features & Benefits• Utilises readily available Reid™

Elephant Foot™ ferrules for steel to concrete connections.

• OrbiPlate is made from high tensile steel.

• Hot Dip Galvanised finishes.

• It is comprising of two washers (one large and one small) and is supplied with a M16 0r M20 class 8.8 bolt.

• Capacity is limited to either the ferrule cast into the concrete or the class 8.8 bolt*.

Advantages• No lost time.

• No hot work, either blowing out holes or welding.

• No call outs when connections don’t line up.

• OrbiPlate locks in place.

• Fine positional adjustment allows accurate positioning of each steel member.

• OrbiPlate provides a high capacity structural connection*.

*Refer to the OrbiPlate Engineer’s Design Guide for design capacities for both steel to concrete & steel to steel applications.

Product CodesOrbiPlate fits into a pre-formed hole in steel component (diameter 70mm ± 1mm)

Provides ± 20mm positional tolerance. No rework or

call outs when connections don’t line up.


Part Number

DescriptionPack Quantity

Compatible Lifting Anchors

3DX85LC SwiftLift™ 3Dx 8.5 tonne Lifting Clutch 13DX85, SJS, FL050 Series

SJLLC SwiftLift™ Jaws 3 tonne Lifting Clutch 1 SJL

SJULC SwiftLift™ Jaws 10 tonne Lifting Clutch 1 SJU

Edge Lift Clutches

| Concrete Lifting Accessories SwiftLift™


Swift™ Shim 150mm x 100mm

For full details of the Reid SwiftLift Concrete lifting Systems including lifting anchors, bond breakers etc, Consult ramsetreid Pre-cast, Tilt-up and Structural Steel Publications.

Part Number Description Pack Quantity

SHIM01 1mm 100

SHIM02 2mm 200

SHIM03 3mm 100

SHIM05 5mm 100

SHIM10 10mm 40

SHIM15 15mm 40

SHIM20 20mm 30

AccessoriesPart Number

DescriptionPack Qty

Replaces

RBH Rambar Leverage Tool 1

DSR16 Dowelsert to suit 16 diam Round Bar 25

DSR20 Dowelsert to suit 20 diam Round Bar 25

FILLET12s Panel Fillet (12mm x 12mm) - 3 metre length 25 RPF

FILLET17s Form Fillet (17mm x 17mm) - 3 metre length 25 RFF

MOCK12 Panel False Joint (40mm x 12mm) - 3 metre length 10 RPFJ

MOCK17 Form False Joint (50mm x 17mm) - 3 metre length 10 RFFJ

PFC Fillet Shear 12

100mm x 75mm Half Shims also Available

Part Number

WLL Pack Quantity

1LE 1.3t 1

2LE 2.5t 1

5LE 5.0t 1

10LE 10.0t 1

20LE 20.0t 1

32LE 32.0t 1

SwiftLift™ Clutches for SwiftLift™ Headed Anchor Range

Ramset™ AustraliaSales, Orders and EnquiriesTel: 1300 780 063Fax: 1300 780 064Email: [email protected]: www.ramset.com.au

australian trade centres South Australia115 Sir Donald Bradman Drive, Hilton 5033

New South Wales71 Carnarvon Street, Silverwater 2128

Western Australia525 Abernethy Road, Kewdale 6105

ramsetreid™ 1 Ramset Drive, Chirnside Park 3116 Information in this documents is correct at the time of printing. Readers should contact ramsetreid™ or consult ramsetreid™ detailed technical information to ensure product is suitable for intended use prior to purchase. ITW Australia Pty Ltd ABN 63 004 235 063 trading as ramsetreid™© copyright 2020. ™ Trademarks of Cetram Pty. Ltd. Used under license by ramsetreid™

Reid™ Australia Customer Service CentreTel: 1300 780 250 Email: [email protected]: www.reid.com.au

Danley™ Australia Tel: 1300 DANLEY (1300 326 539) Email: [email protected]: www.danley.com.au

customer service

Documents

2020 - reid.com.au€¦ · Construction Product Guide. This publication contains basic details of ramsetreid products relevant to the Commercial Construction sector, which includes