Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
2020
VER. 2 2020
ASSORTMENT - SAFETY SHOES &SAFETY GLOVES
Ejendals is a Swedish company that for generations has specialised in developing, manufacturing
and marketing high-quality products that protect hands and feet. In close collaboration with
researchers and our customers, we design products that deliver the highest standard of
protection, durability and ergonomics.
We sell a complete safety concept, which aims to reduce accidents through quality products,
education and safety inspections. From our corporate head office in Leksand, we envision a safer
day with zero injuries to hands and feet.
GLOVES FOR GENERAL HANDLING
TEGERA 8800 INFINITYSynthetic glove
FUNCTIONS anatomically designed, approvedfor handling foodstuffs, withstands contactheat up to 100°cPREVENTS RISK OF scratches, lacerations,blisters, grazes, drying out, chapping, contactwith oil and fat, contact with dirt, abrasioninjuriesTYPE Work gloves - General handlingCATEGORY Cat. IISIZES 5, 6, 7, 8, 9, 10, 11GRIP DESIGN Smooth finishCOLOUR Black, yellow
®
XXX €
- FOR DRYENVIRONMENTS- PALM DIPPED
EN 388:20164121X
EN 407:2004X1XXXX
EN 420:2003+A1:2009
TM
TEGERA 8802 INFINITYSynthetic glove
FUNCTIONS anatomically designed, oil andgrease resistant palm, approved for handlingfoodstuffs, withstands contact heat up to100°cPREVENTS RISK OF scratches, lacerations,blisters, grazes, drying out, chapping, contactwith oil and fat, contact with dirt, abrasioninjuriesTYPE Work gloves - General handlingCATEGORY Cat. IISIZES 5, 6, 7, 8, 9, 10, 11GRIP DESIGN Foam grip pattern
COLOUR Black, yellow
®
ON SALE -10%
- FOR OILYENVIRONMENTS- PALM DIPPED- DOUBLE DIPPED
EN 388:20164121X
EN 407:2004X1XXXX
EN 420:2003+A1:2009
TM
4 (12)
TEGERA 778Synthetic glove
FUNCTIONS water and oil repellent palm,breathable back, ultra thinPREVENTS RISK OF blisters, grazes, dryingout, contact with dirt, abrasion injuriesTYPE Work gloves - General handlingCATEGORY Cat. IISIZES 5, 6, 7, 8, 9, 10, 11GRIP DESIGN Smooth finishCOLOUR White
®- SUPER THIN - GREAT FINGERTIPSENSITIVITY
EN 388:20163111X
EN 420:2003+A1:2009
CUT RESISTANT GLOVE
TEGERA 909Cut resistant glove
FUNCTIONS fibreglass-free, water and oilrepellent palm, steel-fibre free, cut resistantaccording to 388:2016 level bPREVENTS RISK OF scratches, lacerations,cut injuries, contact with dirtTYPE Cut resistant glovesCATEGORY Cat. IISIZES 5, 6, 7, 8, 9, 10, 11GRIP DESIGN Smooth finishCOLOUR Grey
® - CUT LEVEL B
EN 388:20163X42B
EN 420:2003+A1:2009
DYNE
EMA®DIAMOND TECHNOLOG
YDYNEEMA
®DIAMONDTECHN
OL
OGY
SYNTHETIC LEATHER GLOVES
TEGERA 9105Synthetic leather glove
FUNCTIONS ergonomically shaped, reflector,short model, chrome free, reinforced indexfinger, reinforced seams, specially designeddetails, reinforced fingertips, pre-curvedfingers, specially designed thumbPREVENTS RISK OF scratches, lacerations,blisters, grazes, drying out, chapping, contactwith dirtTYPE Work gloves - General handlingCATEGORY Cat. IISIZES 5, 6, 7, 8, 9, 10, 11, 12, 13PALMSIDE MATERIAL Microthan®
PALMSIDE THICKNESS 0,5 mmUPPERHAND MATERIAL PolyesterLINING UnlinedCOLOUR Black, grey, yellow
®- REINFORCED FINGERS- VELCRO FASTENING- FOR FINE ASSEMBLY
EN 388:20161121X
EN 420:2003+A1:2009
5 (12)
TEGERA 9125Synthetic leather glove
FUNCTIONS ergonomically shaped, reflector,knuckle protection, short model, chrome free,reinforced index finger, reinforced seams,padded palm, specially designed details,reinforced fingertips, pre-curved fingers,specially designed thumbPREVENTS RISK OF scratches, lacerations,blisters, grazes, drying out, chapping, contactwith dirt, abrasion injuriesTYPE Work gloves - General handlingCATEGORY Cat. IISIZES 7, 8, 9, 10, 11, 12, 13
GRIP DESIGN Diamond grip patternPALMSIDE MATERIAL Microthan®+PALMSIDE THICKNESS 0,7 mmUPPERHAND MATERIAL PolyesterLINING Half-linedLINING MATERIAL TricotCOLOUR Black, grey, yellow
®- REINFORCED SEAMS- FOR ALLROUND WORK
EN 388:20162131X
EN 420:2003+A1:2009
SAFETY FOOTWEAR - LOW SHOES
JALAS 7118 ZENIT EVO EASYROLLEN ISO 20345:2011, S1 P SRC
PREVENTS RISK OF slipping, antistatic, nailpenetration, toe injuriesEN COMPLIANCE S1 P SRCTYPE Low shoesSUB TYPE Safety footwearNAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textileFITTING RegularFASTENING BoaSIZES 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45,46, 47, 48COLLECTION Zenit Evo
PLATFORM CustomUPPER MATERIAL TextileMIDSOLE MATERIAL PU midsoleLINING MATERIAL PolyesterCOLOUR Black, grey, white
®
®
- PERFECT FIT- COMFORTABLE
SAFETY FOOTWEAR - LOW SHOES
JALAS 7138 ZENIT EVO EASYROLLEN ISO 20345:2011, S3 SRC
PREVENTS RISK OF slipping, antistatic, nailpenetration, toe injuriesEN COMPLIANCE S3 SRCTYPE Low shoesSUB TYPE Safety footwearNAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textileFITTING RegularFASTENING BoaSIZES 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45,46, 47, 48COLLECTION Zenit Evo
PLATFORM CustomUPPER MATERIAL TextileMIDSOLE MATERIAL PU midsoleLINING MATERIAL PolyesterCOLOUR Black, red, white
®
®
- PERFECT FIT - COMFORTABLE
6 (12)
SAFETY FOOTWEAR - BOOT
JALAS 1368 HEAVY DUTYEN ISO 20345:2011, S3 HI CI AN HRO SRC
PREVENTS RISK OF slipping, antistatic, nailpenetration, toe injuries, sprain injuries,contact with coldEN COMPLIANCE S3 HI CI AN HRO SRCTYPE BootsSUB TYPE Safety footwearNAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textileFITTING RegularFASTENING LacesSIZES 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45,46, 47, 48
COLLECTION Heavy DutyPLATFORM Arctic GripUPPER MATERIAL PU-coated leather,microfiberMIDSOLE MATERIAL PU midsoleLINING MATERIAL Polyester furCOLOUR Black, grey
®- FOR HARSH, DIRTYENVIRONMENTS- EXCELLENT GRIP
OTHER EXPLANATION OF SYMBOLS, PROTECTIVE GLOVES
UPDATES FOR EN 388
UPDATES FOR EN 374
EN 388:2016 – TESTING Level of protection 1 2 3 4 5
A) Resistance to abrasion (No. of revolutions) 100 500 2000 8000 —
B) Resistance to cutting (Index) 1,2 2,5 5,0 10,0 20,0
C) Tear resistance (N) 10 25 50 75 —
D) Puncturing resistance (N) 20 60 100 150 —
Level of protection A B C D E FE) Cut resistance, EN ISO 13997 (N) 2 5 10 15 22 30
Level of protection PF) Impact protection, EN 13594:2015 Pass (Level 1 ≤ 9 kN)
ABCDEF
EN 388:2016 Protective gloves against mechanical risks.
Same as before EN 388:2003
New for EN 388:2016
ABCDEFGHI JKLMNOPST
Type A, B, C
VIRUS NOT TESTED AGAINST VIRUSES
J: n-HeptaneK: Sodium hydroxide, 40%L: Sulphuric acid, 96%M: Nitric acid %N: Acetic acid %O: Ammonium hydroxide %P: Hydrogen peroxide %S: Hydrofluoric acid %T: Formaldehyde %
EN 374-5:2016 Protective gloves againstchemicals and microorganisms – Part 5: Terminology and performance requirements for microorganism risks.
EN ISO 374-1:2016Protective gloves against chemicals and microorganisms – Part 1: Terminology and performance requirements for chemical risks.
A: MethanolB: AcetoneC: AcetonitrileD: DichloromethaneE: Carbon disulfideF: TolueneG: DiethylamineH: TetrahydrofuraneI: Ethyl acetate
Type A ≥ level 2 for 6 chemicalsType B ≥ level 2 for 3 chemicalsType C ≥ level 1 for 1 chemical
Permeation level 1 2 3 4 5 6
Minimum break-through times (min) 10 30 60 120 240 480
New forEN 374:2016
Warm lining
Cut protection
For touschscreen
EN 407:2004 Protective gloves against
thermal risks (heat and/or fire)
EN 511:2006 Protective gloves against
cold
Suitable for contact with foodstuffs
Water repellent BreathableWindproof
ESD Latex Short model
Information/UISEN 381-7:1999 Hand-held chainsaw
protective gloves
Suitable for contact with foodstuffs,
except for fatty foods
EN 374-5:2016 Protective gloves against
chemicals and microorganisms – Part 5:
Terminology and performance requirements for
microorganism risks.
EN 388:2016 Protective gloves against
mechanical risks.
EN ISO 374-1:2016Protective gloves against
chemicals and microorganisms – Part 1:
Terminology and performance requirements
for chemical risks.
Waterproof membrane
EXPLANATION OF SYMBOLS, PROTECTIVE FOOTWEAR
WORK SHOES CLASS EN ISO 20347
A E WRU P
CLASSFully
enclosed heel
Electrical resistance (between 0.1-1000
Mega Ohms)
Energy absorption in the heel area (tested
at 20 Joules)
Water-resistant upper
Cleatedoutsole
Penetration- resistant outsole
I, II OB
I O1 • • •I O2 • • • •I O3 • • • • • •II O4 • • • •II O5 • • • • •
S Shoes marked S have protective toecaps which will withstand 200 J of impact energy and 15 kN of pressure
O Shoes marked with an O are not equipped with a protective steel toecap but meet the basic requirements for work shoes
Class I Footwear made from leather and other materials, excluding all-rubber or all-polymeric footwear
Class II All-rubber (i.e. entirely vulcanised) or all-polymeric (i.e. entirely moulded) footwear
P Penetration-resistant outsole
HRO Heat-resistant outsole compound tested at 300°C
WR Water-resistant footwear
WRU Water-resistant upper
CI Cold insulation
HI Heat insulation
HI3 Heat insulation performance level 3
Type 2 All fire suppression and rescue interventions where protection against penetration, and toe protection are needed, no protection against chemical hazards
ESD Electro Static Discharge
ESD IEC 61340-5-1 Electrostatic Discharge resistance below 35 megaOhm
SRA Slip-resistance on ceramic tile floor with Sodium lauryl sulphate solution
SRB Slip-resistance on steel floor with glycerol
SRC SRA + SRB
FO Oil-resistant outsole
A Electrical resistance (between 0.1-1000 Mega Ohms)
E Energy absorption in the heel area (tested at 20 Joules)
PROTECTIVE SHOES CLASS EN ISO 20345
A E WRU P
CLASSProtective toecap (200 J / 15000 N)
Fully enclosed
heel
Electrical resistance (between 0.1-1000
Mega Ohms)
Energy absorption in the heel area (tested
at 20 Joules)
Water-resistant upper
Cleated outsole
Penetration- resistant outsole
I, II SB •I S1 • • • •I S2 • • • • •I S3 • • • • • • •II S4 • • • • •II S5 • • • • • • •
REGULATIONS AND STANDARDS
Shock absorbing
Nail protection in steel
Nail protection in plasma-treated
composite (PTC) textile
Ergothan Shock Absorption System
Stabilizator
ProNose toe reinforcement
Aluminiumtoecap
Composite toecap
Steel toecap
Wide fit Heat-resistant upper
ESD Anti-static properties
Heat-resistant outsole
Oil-resistant outsole
Water repellentWaterproofWinter model
Zipper
xx-small
53x-small
4x-small
6small
7medium
8large
9
x-large
10xx-large
113x-large
124x-large
135x-large
146x-large
15
COLOUR CODING - GLOVE SIZES
JALAS STANDARD SIZING 36 37 38 39 40 41 42 43 44 45 46 47
Millimeter 242 249 256 262 269 276 282 289 296 302 309 316
UK 3 4 5 6 6½ 7 8 9 10 10½ 11 12
US Male 4 5 5½ 6½ 7½ 8 9 9½ 10½ 11 12 13
US Female 5 6 6½ 7½ 8½ 9 10 10½ 11½ 12 13 14
SIZE GUIDE - FOOTWEAR
JALAS FOOTSTOP SERVICE
All Footwear manufactured with brand name JALAS and certified according toEN ISO 20345 or EN ISO 20347 meets the requirements when fitted withFootStop Service Insoles.Repetitive strain injury (RSI) and musculoskeletal disorders are probably theforemost work environment problem in the western world. JALAS has adopted acomprehensive approach to shoes and insoles.FootStop Service works as a form of preventative health-care. It cannot, however,replace medical treatment of injuries already sustained. JALAS anatomicalinsoles solve many problems – but not all. For people who have severe problemswith their feet, orthopedically tested insoles are a must
FootStop Service makes it possible to analyse feet quickly and easily.You can have your feet scanned with your socks on.It takes just a few minutes for the scanner to register the arch of the footand the feet’s measurements and points of pressure.The results are available directly. The display shows how and where thefeet are under pressure and whether the arch is low, high or in between,Your local representative can help you arrive at the right shoes and soles.
In many cases, individually designed orthopaedic soles can be avoided by using
JALAS FSS insoles – available for low, medium and high foot arches.
Ejendals abLimavägen 28
SE-793 32 Leksand, SwedenPhone +46 (0) 247 360 00
[email protected]@ejendals.com
www.ejendals.com