2
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707 www.lvscontrols.com Project: Model No.: Comments: APPLICATION FEATURES MOUNTING LED COMPATIBLE U L ® UL924 LISTED C US 5 YEAR WARRANTY In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC-2, to convert normal light fixtures into approved emergency lights. The EPC-2 saves energy and money while ensuring compliance with both life safety and energy codes. During normal operation, the same switch, occu- pancy sensor, relay panel, or lighting control can switch normal and emergency fixtures on and off simultaneously. During a utility power interruption, the EPC-2 automatically bypasses the normal lighting controls, turning the emergency lights ON, regard- less of switch position. The EPC-2 is ceiling or wall mounted in a junction box with a single gang plaster ring and is usually located in the area where the emergency fixtures are installed. Unique, Patented Automatic Diagnostic Fire Alarm, Remote Test When the room switch is turned off, the EPC-2 will run a 2.5 self-test routine, verifying that the emergency power source was available and that the EPC-2, ballast, and lamp(s) are all functioning correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible locations, because the unit does not rely on access to its manual test switch. Utility & Emergency Power Indicator LED’s Slim, aractive flush mount profile allows easy access to manual test switch and LED’s. EPC-2 Emergency Power Control For Switched Loads

20171010 EPC2 Spec - LVS Inc.EPC-2, to convert normal light fixtures into approved emergency lights. The saves EPC-2 energy and money while ensuring compliance with both life safety

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 20171010 EPC2 Spec - LVS Inc.EPC-2, to convert normal light fixtures into approved emergency lights. The saves EPC-2 energy and money while ensuring compliance with both life safety

LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707

www.lvscontrols.com

Project:

Model No.:

Comments:

APPLICATION

FEATURES

MOUNTING

LED COMPATIBLE

UL®UL924 LISTEDC US

5YEAR

WARRANTY

In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC-2, to convert normal light fixtures into approved emergency lights. The EPC-2 saves energy and money while ensuring compliance with both life safety and energy codes.

During normal operation, the same switch, occu-pancy sensor, relay panel, or lighting control can switch normal and emergency fixtures on and off simultaneously.

During a utility power interruption, the EPC-2 automatically bypasses the normal lighting controls, turning the emergency lights ON, regard-less of switch position.

The EPC-2 is ceiling or wall mounted in a junction box with a single gang plaster ring and is usually located in the area where the emergency fixtures are installed.

Unique, Patented Automatic Diagnostic

Fire Alarm, Remote Test

When the room switch is turned off, the EPC-2 will run a 2.5 self-test routine, verifying that the emergency power source was available and that the EPC-2, ballast, and lamp(s) are all functioning correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible locations, because the unit does not rely on access to its manual test switch.

Utility & Emergency Power Indicator LED’sSlim, attractive flush mount profile allows easy access to manual test switch and LED’s.

EPC-2Emergency Power ControlFor Switched Loads

Page 2: 20171010 EPC2 Spec - LVS Inc.EPC-2, to convert normal light fixtures into approved emergency lights. The saves EPC-2 energy and money while ensuring compliance with both life safety

SPECIFICATIONS

SINGLE LINE DRAWING

WIRING DIAGRAM

ORDERING INFORMATION ADDITIONAL RESOURCES

EPC-2 Installation SheetFAQ SheetAlternative Wiring Sheet

Terms & Conditions/Warranty Information

20171010_LVUNV1

LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707

www.lvscontrols.com

Fire Alarm Tie-In/Overridewww.lvscontrols.com/assets/UL924FAI.pdf

Red Fire Alarm Jumper (see

additional resources)

DESIGNATEDEMERGENCY

LIGHTS

REGULAR ROOM LIGHTS

EPC-2CONTROL

UL 1008Transfer SwitchOr Equivalent

Normal Utility Power

Emergency Power Source

Neutral Not Shown

EPC-2CONTROL

NORMAL PANEL

Normal Utility Power

EMERGENCYPANEL

EPC-2

CONTROL DEVICE

(Switch, Sensor, etc.)

EMERGENCY HOT

#3 WHITE

NORMAL PANEL

20A

#2 RED

#1 BLACK

*

Relay Panel, Power Pack, Sensor, or other (optional)*

Normal Light (optional)

EMERGENCY PANEL OR INVERTER

20ANORMAL HOT

NORMAL NEUTRALEMERGENCY NEUTRAL

#4 WHITE/BLUE

#5 YELLOW

#6 BLUE

Emergency Light

Note: Emergency Light is also called N/E Light or Normal/Emergency

Light by many specifiers

EMPOWER

TEST

UTILITYPOWER

MODEL NO.

SENSING INPUT

LOAD RATING

BALLAST LOAD RATING

INCANDESCENT LOAD

WARRANTY

EPC-2

120V - 277V

120V - 277V (20A)

20A (120-277V)

1200W (120V) / 1500W (277V)

5 Year Replacement Warranty

ELECTRICAL

MOUNTING

RATING

SHIPPING WEIGHT / COLOR

TEMPERATURE

FLUSH MOUNTED SIZE

BODY SIZE

4-11/16” Junction Box w/ single gang plaster

UL94-5VA

32ºF - 140ºF (0ºC - 60ºC)

MECHANICAL

12 oz. / White

Single Gang Size

1.7” x 3” x 1.2” (W x H x D body)