Upload
dinhthu
View
218
Download
6
Embed Size (px)
Citation preview
We have arranged the drive wheels of our Light-EMS
200-2 according to the inside drive principal. The wheels
don’t drive on top of the rail like with a conventional
C1–System, the wheels drive inside the rail.
That enables us to mount the rail much closer to the
steelwork, which means that the overall height of the
system is reduced significantly.
With vertical and horizontal curves, 2-way, 3-way and turn
switches, transverse conveyors and lifters, the system
can be configured according to your specifications.
If you want to install an EMS in an older building with space restrictions or if you are looking for a highly efficient and slim system for loads up to 250 kg (550 lbs) then the AFT-Group has exactly what you need:The new “Light–EMS 200-2”. You are not only saving space, but also purcha-se and operational costs. If you want to convey light loads, this system has many advantages compared to the classic C1–rail.
“Challenge us!We have the right solution for your conveying requirements.”
Heiko Hofmann, CEO AFT-Group
Conveying, automated storage, palletising, lifting, lowering, tilting and positioning. This is the
world in which the AFT Group is active, but we understand conveyance is more than just a
physical process. Our solutions are tailor-made to enhance your business processes. We ad-
opt a dynamic and flexible approach to design, allowing us to address different requirements
in different environments.
XX Because of the compact overall height of the sys-tem, light goods can be transported in conveying levels with restricted heights.
XX The compact, lightweight design makes main-tenance much easier.
XX Long goods can be stacked diagonally in a space saving manner in storage sections of the EMS.
XX The lightweight design of the trolleys reduces energy consumption and wear.
Advantages at a glance
Rail (H x W) 135 x 80 mm (5-5/16” x 3-5/32”)Speed 0 - 120 m/min (0 – 390 ft/min)Gross load weight 250 kg (550 lbs)Curves radius > 750 mm (> 29.5”) Overall height (bottom-line steelwork 245 mm (9-5/8”) to bottom-line rail)
Technical Data Light-EMS
AFTeco: The Future Drive Technology
Advantages of AFTeco drive:XX Almost constant torque over the entire speed range:
very efficient at high speeds and but also very low
speeds possible
XX High effective power and compact gearless motors
XX Easier maintenance because of smaller compact design
XX Mixed operations in systems with conventional tech-
nology possible
XX Reduction of operating costs due to lower energy
consumption and lower maintenance costs
If you have any further questions, please contact us.
We are happy to help!
AFTeco is our response to the demand for more greener
technology in your organisation. Our AFTeco drive has
been specifically developed to increase the efficiency of
Light-EMS systems and covers the entire load and speed
range of the EMS 200-2. That leaves room for variable
capacity increases.
AFT Automatisierungs- und Fördertechnik GmbH & Co. KGAn der Wiese 14, 79650 Schopfheim, GermanyPhone: +49 7622 3998-0Fax: +49 7622 [email protected]
Our products▶ Electrified monorail system▶ Automated transport for goods (for hospitals)▶ Automated guided vehicle system▶ Powered pallet conveyor▶ Inverted monorail system▶ Skillet systems▶ Skid roller conveyor▶ Storage and conveying technology▶ Belt conveyor▶ Power & Free
Our customersAudi • BMW • Bosch-Siemens • Chery • Daewoo • DAF Daimler • Dematic • DHL • Dongfeng Motor Corporation FAW • Ford • Great Wall Motors • GM • Heineken • Hilti Hyundai • Jaguar Land Rover • Johnson-Controls • Karmann KIA • Klinikum Freiburg • KUKA • MAN • VDL NedCar Nobilia • Opel • Porsche • PSA • Renault • Saab • SAIC Motor Schweizerische Bundesbahnen • SFS Group • Skoda Soueast Motor • Swisslog • UFA • Vauxhall • Vetrotex Volvo • VW
Our subsidiaries