Upload
lamquynh
View
241
Download
6
Embed Size (px)
Citation preview
ECONOMY
2017 Lowest up front cost
Clevertronics has the largest range on the market and continues to be the lowest cost option for all emergency lighting requirements.
Clevertronics is always my choice
PROVEN
LOCAL SUPPORT
Clevertronics has the largest range on the market and continues to be the lowest cost option for all emergency lighting requirements.
LIFELIGHTTM
ELIFE-X-LI 3-4
CLEVERFIT®
EXIT 5-6
BOXLITETM
EXIT7-8
ULTRABLADE® EXIT
9-10
SWINGBLADE® EXIT
11-12
JUMBO EXIT
13-14
WEATHERPROOF EXIT
15-16
CIRCLITE 17-18
SUPALITE 19-20
BATTENS
21-22
WEATHERPROOFBATTENS
23-24
2 0 1 7 E c o n o m y R a n g e
EXPERTLOCAL
SUPPORT
LED LIFELIGHTTM
ELIFE-X-LI
ENERGY EFFICIENT LED - Low 0.4W standby power consumption.
SUPERIOR LIGHT OUTPUT - D40 spacing classification to cover most applications.
LONG LIFE LED - Energy efficient, Long Life LED.
TAMPER RESISTANT - No dome required.
The ELIFE-X-LI a high performance emergency lighting solution, with a D40 classification. With an energy efficient LED lamp and reliable Lithium Iron Phosphate battery. The Lifelight delivers superior light output allowing greater spacing. Retrofitting is easy with an adapter plate to suit older applications in the one box. Tamper resistant with no dome required, the Lifelight is suitable for most emergency lighting applications.
With an impressive D40 spacing classification the LIFELIGHT™ delivers higher levels of compliance.
Based on area of 3350m2 @ 2.7m ceiling height, required quantity to meet AS/NZS2293.
SAVE TIME AND MONEY ON INSTALLATION WITH LIFELIGHT
STANDARD PREMIUMSTANDARD ECONOMY ELIFE-X-LI NOW DELIVERS
www.clevertronics.com.au 3
SPECIFICATION - NON-MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
ELIFE-X-LI(Recessed)
0.4W D40 D40ELIFE-X-LI-SMS
(Surface mount)
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0 8.0 9.0 10 15
D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4
SPARE PARTSPART NUMBER Battery Driver/Charger LED module
ELIFE-X-LI1560150 ELIFE-X-LI-CKIT 1100875
ELIFE-X-LI-SMS
95
Dimensions (mm) Without Adaptor Plate
145
Dimensions (mm) With Adaptor Plate
Dimensions (mm)Ballast
51
232 42
Dimensions (mm)SMS
148
60
267
ECONOMYNiCd BATTERY RANGE
4
LED CLEVERFIT® EXIT
ENERGY EFFICIENT LED - Low 1.1W standby power consumption.
ONE BOX SOLUTION - Comes with both single and double sided decals in Running man ‘Pictograph’ and the ‘EXIT’ decal.
EASY INSTALL - Comes with large terminal block & cable entry for easy installation.
LONG LIFE LED - Energy efficient, long life LEDs.
A proven industry leader, the Cleverfit® exit is the only true one box solution on the market.
Current requirements have never been easier to meet. Our industry first, tamper-proof legend cover makes it possible to include all diffuser options of ‘Pictograph’ & ‘EXIT’ in one box for single and double-sided needs. The Cleverfit® is universal mounted with a quick connect bracket for fast ceiling or wall mounting options.
Known for its reliable performance, the Cleverfit® is supplied with long life, energy efficient, high brightness LEDs and a reliable Lithium Iron Phosphate battery.
24 m
AS2293 requirements have never been easier to meet with all diffuser options in one box.
Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the 'pictograph' legend on an exit. It is still best practice to match 'EXIT' for 'EXIT' in a building built prior to this change.
Pick the correct decal
PICK
Slip it in
SLIP
Clip it shut
CLIP
ONE BOX SOLUTION - ALL OPTIONS
www.clevertronics.com.au 5
SPECIFICATION - MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
ECFLED-LI 1.1W E2 E2
THEATRE VERSION - SUFFIX
PART NUMBER Double sided Decals
ECFLED-LI-TH -DS
-R Pictograph-RL Pictograph left arrow-RR Pictograph right arrow-E EXIT-EL EXIT left arrow-ER EXIT right arrow
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0
E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 -
SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip
ECFLED-LI 1550195 8002880 8002900
215
35580
Dimensions (mm)
Ceiling Mount Wire Guard Part number: 2530110
Dimensions (mm) L x W x H
407 x 190 x 267
Wall Mount Wire Guard Part number: 2530050
Dimensions (mm) L x W x H
415 x 230 x 120
ECONOMYNiCd BATTERY RANGE
6
LED BOXLITETM EXIT
ENERGY EFFICIENT LED - Low 3W standby power consumption.
ONE BOX SOLUTION - Comes with both single and double sided decals in Running man ‘Pictograph’ and the ‘EXIT’ decal.
EASY INSTALL - Quick connect bracket for fast ceiling or wall mounting. Large terminal block & cable entry for easy installation.
LONG LIFE LED - Energy efficient, long life LEDs.
For over 20 years, the Clevertronics Boxlite has provided a quality solution to Contractors requiring a conventional style exit for easy retrofitting. It is now available with the advantage of long lasting LEDs. Boxlite uses a universal body that can be supplied with diffuser combinations for both wall or ceiling mounting. The body uses a quick connect detachable base plate that can be mounted and wired into position, then the gear tray can be installed and secured. All decals combinations for single or double-sided, ‘Pictograph’ or ‘EXIT’ options are available from one box solution.
24 m
AS2293 requirements have never been easier to meet with all diffuser options in one box.
Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the ‘pictograph’ legend on an exit. It is still best practice to match ‘EXIT’ for ‘EXIT’ in a building built prior to this change.
Pick the correct decal
PICK
Slip it in
SLIP
Clip it shut
CLIP
ONE BOX SOLUTION - ALL OPTIONS
www.clevertronics.com.au 7
SPECIFICATION - MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
EBLLED-WM (Wall)3W
E1.6 E2EBLLED-CM (Ceiling) D5 D5
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0
D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 - - -E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 - - -
SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip
EBLLED-WM (Wall)1510330 8002281 8002115
EBLLED-CM (Ceiling)
Ceiling Mount Wire Guard Part number: 2530110
Dimensions (mm) L x W x H 407 x 267 x 190
Wall Mount Wire Guard Part number: 2530050
Dimensions (mm) L x W x H 439 x 120 x 225
240
160
375
Dimensions (mm) Ceiling Mount
Dimensions (mm) Wall Mount
160
375 105
ECONOMYNiCd BATTERY RANGE
8
LED ULTRABLADE® EXIT
ENERGY EFFICIENT LED - Low 4.5W standby power consumption.
ONE BOX SOLUTION - Comes with both single and double sided decals in Running man ‘Pictograph’ and the ‘EXIT’ decal.
EASY INSTALL - Comes with large terminal block & cable entry for easy installation.
LONG LIFE LED - Energy efficient, long life LEDs.
Clevertronics has combined a number of key design features and technologies to create the Ultrablade® recessed exit.
The sophisticated look of the Ultrablade® satisfy architectural requirements for a premium recessed exit without sacrificing ease of installation and long service life.
Ultrablade® uses a flat panel diffuser with drop-in decals secured by a tamper proof cover. The one box solution comes with all decal options available in both ‘EXIT’ or ‘Pictograph’ for ease of installation.
Its low profile housing and smart design requires only 110mm of ceiling space for the installation.
24 m
AS2293 requirements have never been easier to meet with all diffuser options in one box.
Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the ‘pictograph’ legend on an exit. It is still best practice to match ‘EXIT’ for ‘EXIT’ in a building built prior to this change.
Pick the correct decal
PICK
Slip it in
SLIP
Clip it shut
CLIP
ONE BOX SOLUTION - ALL OPTIONS
www.clevertronics.com.au 9
SPECIFICATION - MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
EUBLED 4.5W D5 E3.2
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0
D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E3.2 6.2 6.2 6.4 6.6 6.6 6.6 6.6 5.8 - -
SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip
EUBLED 1510410 8002010 8002175
Dimensions (mm)
Ceiling cutout 430 x 70 (mm)
160
483
110
ECONOMYNiCd BATTERY RANGE
10
LED SWINGBLADE® EXIT
ENERGY EFFICIENT LED - Low 4.5W standby power consumption.
ONE BOX SOLUTION - Comes with both single and double sided decals in Running man ‘Pictograph’ and the ‘EXIT’ decal.
EASY INSTALL - Comes with large terminal block & cable entry for easy installation.
LONG LIFE LED - Energy efficient, long life LEDs.
Clevertronics has combined a number of key design features and technologies to create the Swingblade® surface mount exit.
A universal, blade style exit meets architectural requirements for a premium style exit without sacrificing the ease of installation and long service life.
Swingblade® uses a flat panel diffuser with drop-in decals secured by a tamper proof cover. Our one box solution comes with all diffuser combinations of single and double-sided, ‘EXIT’ or ‘Pictograph’ options for ease of installation. The Swingblade® surface mount exit is available in long life, energy efficient, high brightness LED technology and comes with pulse charged, high temperature Ni-Cd battery.
AS2293 requirements have never been easier to meet with all diffuser options in one box.
Since 2005 the Australian Standard for emergency lighting requires all new applications and major refurbishments to have the 'pictograph' legend on an exit. It is still best practice to match 'EXIT' for 'EXIT' in a building built prior to this change.
Pick the correct decal
PICK
Slip it in
SLIP
Clip it shut
CLIP
ONE BOX SOLUTION - ALL OPTIONS
24 m
www.clevertronics.com.au 11
LED SWINGBLADE® EXIT
SPECIFICATION - MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
ESBLED 4.5W D5 E3.2
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0
D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E3.2 6.2 6.2 6.4 6.6 6.6 6.6 6.6 5.8 - -
SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip
ESBLED 1510450 8002020 8002185
Dimensions (mm)
263
Dimensions (mm)
230
90
435
ECONOMYNiCd BATTERY RANGE
12
JUMBO EXIT
40m VIEWING DISTANCE - 250mm high pictograph.
EASY INSTALL - Comes with large terminal block & cable entry for easy installation.
Clevertronics’ Jumbo range caters for applications requiring viewing distances not covered by conventional 24m exits. Switch mode electronics and a dual-rate charge, high temperature Nickel Cadmium battery combination ensure maximum reliability. The standard Jumbo exit uses a 250mm high pictograph for viewing distances up to 40 metres. Featuring robust steel housing with slide in diffusers and back plates for single-sided and double-sided configurations.
www.clevertronics.com.au
40 m
13
SPECIFICATION
PART NUMBER Standby Power C0 C90
EJELED-40 5.3W D5 N/A
Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6
SPARE PARTSPART NUMBER Battery Driver/Charger
EJE18M-CM 1510420 EJELED-40-CKIT
Dimensions (mm)
320
100630
ECONOMYNiCd BATTERY RANGE
14
LED WEATHERPROOF EXIT
UNIVERSAL MOUNT, ONE BOX SOLUTION - Wall or ceiling mounted. Also come with both Running man pictograph and the word EXIT decal.
ROBUST DESIGN - IK10 polycarbonate body with wall and ceiling mount for industrial uses where dust and moisture is prevalent.
ENERGY EFFICIENT LED - Low 1.1W standby power consumption.
LONG LIFE LED - Energy efficient, long life LEDs.
The Clevertronics weatherproof range provides a cost effective solution of emergency exits for commercial and industrial applications.
The IP66/IP67 ingress protection and IK10 vandal resistant rating is ideal where moisture and/or dust is prevalent or a high level of impact protection is required.
Clevertronics weatherproof exit can be wall or ceiling mounted. It is supplied with long life, energy efficient, high brightness LEDs and a reliable Lithium Iron Phosphate battery.
24 m
AS2293 requirements have never been easier to meet with all diffuser options in one box.
Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the ‘pictograph’ legend on an exit. It is still best practice to match ‘EXIT’ for ‘EXIT’ in a building built prior to this change.
Pick the correct decal
PICK
Slip it in
SLIP
Clip it shut
CLIP
ONE BOX SOLUTION - ALL OPTIONS
www.clevertronics.com.au 15
SPECIFICATION - MAINTAINED EMERGENCY
PART NUMBER Standby Power C0 C90
EWELED-LI 1.1W E2 E1.6
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0
E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 -E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 -
SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip
EWELED-LI 1550195 8002880 8002900
272
410
100
ECONOMYNiCd BATTERY RANGE
16
LED CIRCLITE
EASY INSTALL - Comes with large terminal block allows for fast installation and maintenance.
ENERGY EFFICIENT LED - 14 to 16W replacing traditional 32W Oyster luminaires.
LONG LIFE LED - Energy efficient, long life 30,000hr LEDs.
The Circlite LED has a superior classification of C0=D32 C90=D32 providing a large 278m² coverage. With an IP44 rating, sturdy polycarbonate construction and opal acrylic diffuser. It is ideal for applications such as corridors and stairwells.
Available with the latest Hawkeye Microwave Motion Sensor, you can save even more energy as the fitting will illuminate only when presence is detected. Capable of the following options: on/off, min/max and never off.
Coupling this state of the art technology with slim 348mm (diameter) x 100mm (depth), robust design the LED Circlite will make the perfect addition to your preferred product portfolio.
HAWKEYE ®
240V and LED Circlite, maintained emergency luminaire with microwave sensor control.
HAWKEYE MICROWAVE MOTION SENSOR
HAWKEYE ®
The integral Hawkeye microwave motion sensor turns off the main light source when no presence is detected, saving energy and money.Capable of the following options: on/off, min/max and never off.
30-150�
DETECTION ANGLE
12-18m (diameter)
DETECTION RANGE
10sec-30min (adjustable)
TIME SETTING
www.clevertronics.com.au 17
SPECIFICATION - NON EMERGENCY
PART NUMBER Standby Power Lumen Output
FCLLED 14W1340 lm
FCLLED-MS 15W*
SPECIFICATION - EMERGENCY
PART NUMBER Standby Power C0 C90
ECLLED 16WD32 D32
ECLLED-MS 16W**-MS versions Power Consumption figure stated is the maximum value when on (presence detected)
Non-Emergency Circlite LED Surface mounted LED circular, 30,000 hour LED, optional Hawkeye microwave motion sensor control.
Circlite LED - High temperature Nickel Cadmium battery Surface mounted LED circular, 30,000 hour LED, optional Hawkeye microwave motion sensor control, pulse charged high temperature Nickel Cadmium battery pack.
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0 8.0 9.0 10 15
D32 15.4 16.1 16.7 17.2 17.6 18.0 18.5 19.5 20.2 20.6 20.7 20.6 20.3 14.6
SPARE PARTSPART NUMBER Battery
ECLLED1510165
ECLLED-MS
Dimensions (mm)
348 100
ECONOMYNiCd BATTERY RANGE
18
LED SUPALITE
ENERGY EFFICIENT LED - 2x energy efficient LED. Low 2W standby power consumption.
EASY INSTALL - Comes with flex & plug. Also comes with large terminal block and cable entry hole for hard wired applications.
LONG LIFE LED - Energy efficient, long life, 50,000hr LED in non-maintained mode - NEVER CHANGE THE LAMP AGAIN.
FLEXIBLE MOUNTING OPTIONS - Light weight for easy wall mounting. Adjustable heads to meet installation requirements.
The Clevertronics LED Supalite range provides a cost effective solution to emergency flood applications for commercial and industrial use. The LED Supalite can provide emergency lighting where it is not possible to mount conventional emergency luminaires, e.g. factory/warehouse applications or outside areas such as loading docks, car parks and evacuation assembly points.
The LED Supalite replaces 2x10W and 2x12W traditional halogen flood units, outperforming them with respect to light output and a better distribution. Its pulse charged, high temperature Ni-Cd battery is light weight and makes it easy to wall mount compared to the traditional sealed lead acid battery flood units.
LED SUPALITEAdjustable LED heads
Large terminal block for hard wired applications
Pulse charged, high temperature Ni-Cd battery
www.clevertronics.com.au 19
SPECIFICATION - NON-MAINTAINED EMERGENCYPART NUMBER Standby Power Max. during first 16 hours charge
EFLLED 2.0W 3.3W
Please note: Emergency flood units cannot be issued with an AS2293.3 spacing table classification because they have movable heads (not fixed). Specifiers note: IES files are available for lighting design calculations and can be downloaded from our website or please contact our office for assistance.
SPARE PARTSPART NUMBER Battery Driver/Charger LED head
EFLLED 1510170 8002080 1100955
Single LED head
0.00
0.50
9.50
10.00m
10.00m0.00
lx
EFLLED wall mounted 3m highHeads tilted down 30° rolled out 30°
137
225
282
63
ECONOMYNiCd BATTERY RANGE
20
T8 SABRE BATTENS
EASY INSTALL - A modular fitting with large terminal block allows for fast installation and maintenance.
WIDE BODY - To cover junction boxes and provides ample space for heat generating components.
LAMPS INCLUDED - T8 840 Tri Phosphor fluorescent lamp included.
Clevertronics battens feature quality components and a superior finish to provide both good looks and reliability. The product is designed for ease of installation and maintenance.
The Sabre project batten range is available in standard 240V and matching emergency battens. The Sabre batten range has been developed for applications such as basement car parks, warehouses, fire stairs, commercial public spaces and industrial sites. Clevertronics also have a project batten range where customer configuration can be specified and made to order. Emergency battens come standard with variable rate charge high temperature Nickel Cadmium battery pack and surface mount electronics for long service life.
www.clevertronics.com.au 21
PART NUMBER - NON EMERGENCYBare Diffused Wire guard
1x18W FBS118 FBS118-DIF FBS118-WG2x18W FBS218 FBS218-DIF FBS218-WG1x36W FBS136 FBS136-DIF FBS136-WG2x36W FBS236 FBS236-DIF FBS236-WG
PART NUMBER - MAINTAINED EMERGENCYBare Diffused Wire guard
1x18W EBS118M* EBS118M-DIF* EBS118M-WG*2x18W EBS218M EBS218M-DIF EBS218M-WG1x36W EBS136M* EBS136M-DIF* EBS136M-WG*2x36W EBS236M EBS236M-DIF EBS236M-WG
*For non-maintained battens, replace M to N within relevant part number.
SPECIFICATIONBare Diffused Wire guard
C0 C90 C180 C0 C90 C180 C0 C90 C1801x18W D25 C25 - D25 C20 - D25 C25 -2x18W D25 C25 D25 D25 C20 D12.5 D25 C25 D251x36W D50 D16 - D50 C40 - D50 D16 -2x36W D50 D16 D50 D50 C40 D25 D50 D16 D40
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0 8.0 9.0 10 15
C20 8.9 9.4 9.9 10.3 10.7 11.1 11.5 12.3 12.8 13.0 13.0 12.7 12.0 -C25 9.4 10.0 10.5 11.0 11.5 11.9 12.4 13.4 14.0 14.4 14.6 14.5 14.2 6.6C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.6 16.6 17.4 17.9 18.3 18.5 16.2
D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 13.0 12.8 12.3 11.3 9.9 7.6 -D16 12.1 12.6 13.0 13.3 13.6 13.9 14.1 14.6 14.6 14.4 13.8 12.9 11.5 -D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.7 18.1 18.3 18.2 17.9 17.3 7.7D32 15.4 16.1 16.7 17.2 17.6 18.0 18.5 19.5 20.2 20.6 20.7 20.6 20.3 14.6D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4D50 18.0 18.7 19.4 20.1 20.7 21.2 21.8 23.2 24.2 24.9 25.4 25.7 25.9 23.7
PRODUCT DIMENSIONS (mm)Body type L W H
1x18W & 2x18WBare 613 112 95
Diffused & Wire guard 630 120 110
1x36W & 2x36WBare 1223 112 95
Diffused & Wire guard 1238 120 110
ECONOMYNiCd BATTERY RANGE
22
EASY INSTALL - Comes with large terminal block and stainless steel mounting brackets for fast installation and maintenance.
WIDE BODY - To cover junction boxes and provides ample space for heat generating components.
LAMPS INCLUDED - T8 840 Tri Phosphor fluorescent lamp included.
FEATURES
Stainless steel brackets for quick installation, ensuring the luminaire maintains weatherproof rating
Weatherproof grommet or conduit entry
Stainless steel captive & tamper-proof clips
Clevertronics weatherproof battens feature quality components and a superior finish to provide reliability and performance.
It is available in standard 240V and emergency option with high temperature Ni-Cd battery.
Applications include underground car parks, warehouses, stairwells and industrial sites.
T8 WEATHERPROOF BATTENS
23www.clevertronics.com.au
PART NUMBER - NON EMERGENCY1x18W FWB118-P2x18W FWB218-P1x36W FWB136-P2x36W FWB236-P
SPECIFICATION - EMERGENCYECONOMY Non-maintained Maintained C0 C90 C180
1x18W EWB118N-P EWB118M-P* D25 C25 -2x18W - EWB218M-P D25 C25 D201x36W EWB136N-P EWB136M-P D50 C40 -2x36W - EWB236M-P D50 C50 D40
*Only available in wide body
AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0 8.0 9.0 10 15
C25 9.4 10.0 10.5 11.0 11.5 11.9 12.4 13.4 14.0 14.4 14.6 14.5 14.2 6.6C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.6 16.6 17.4 17.9 18.3 18.5 16.2C50 11.3 12.0 12.7 13.4 14.0 14.5 15.2 16.7 17.9 18.8 19.6 20.1 20.4 19.6D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 16.1 16.4 16.3 16.0 15.4 14.5 -D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.7 18.1 18.3 18.2 17.9 17.3 7.7D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4D50 18.0 18.7 19.4 20.1 20.7 21.2 21.8 23.2 24.2 24.9 25.4 25.7 25.9 23.7
PRODUCT DIMENSIONS (mm)Body type L W H
1x18W Narrow body 655 100 1051x18W & 2x18W Wide body 655 160 105
1x36W Narrow body 1265 100 1051x36W & 2x36W Wide body 1265 160 105
EWB236M-P
L
WH
24
ECONOMYNiCd BATTERY RANGE
• 40% Extra Battery Life*
• Up to 50% Maintenance cost savings
• More energy efficient
• Environmentally Responsible
• 100,000 Hour LEDs
LPTM
PREMIUMLITHIUM BATTERY RANGE
• Lithium performance at the same price as NiCd & NiMH*
• Lower maintenance costs• Lower energy costs
* Compared to Clevertronics NiCd products
• Australia’s No1 selling Emergency Lighting range• Over 50% maintenance savings vs NiCd• Standard Clevertest Plus
NOTES
www.clevertronics.com.au
Version 2016-1
VICTORIA195 Chesterville RdMoorabbin VIC 3189Phone: +61 3 9559 2700Fax: +61 3 9559 2799
NEW SOUTH WALES9 Distribution Pl Seven Hills NSW 2147Phone: +61 2 8805 6400 Fax: +61 2 8805 6444
QUEENSLAND2/8-12 Monte-Khoury DrLoganholme QLD 4129Phone: +61 7 3442 9700Fax: +61 7 3442 9777
WESTERN AUSTRALIAUnit 1, 10 Pavers CircleCnr Hod WayMalaga WA 6090Phone: +61 8 9248 3720Fax: +61 8 9248 3725
SOUTH AUSTRALIA U2/19 Main TceRichmond SA 5033Phone: +61 8 8301 8800Fax: +61 8 8351 8286
NEW ZEALANDUnit 22 /761 Great South RoadPenroseAucklandPhone: +64 800 548 448