2017...A. 5.5" deck depth. 4-point suspension. Full-floating. B. 7-gauge high-strength low alloy deck construction. C. High-strength polymer belt covers. D. Reinforced anti-scalp rollers

2017 PRODUCT INFORMATION GUIDE

1100

MISSION STATEMENT

Exmark® Manufacturing was incorporated in May 1982 as an

independent manufacturer of professional turf care equipment.

The company began its manufacturing operation with seven

employees in a garage-type building located just south of Beatrice,

Nebraska. In 1983, the company relocated to its present location in

the Gage County Industrial Park in Beatrice.

At that time, the company focused on manufacturing a line of mid-

size walk-behind mowers and turf rakes. In 1987, due to the rapidly

growing turf care equipment market and the competitive nature of

that market, the product line was expanded to include commercial

riding mowers.

The basis for Exmark's phenomenal growth since 1995 was the

introduction of a mid-mount zero-turn riding mower — the Exmark

Lazer® Z. Production began in April of 1995, and it was quickly

accepted by turf care professionals as a state-of-the-art machine.

Currently, this zero-turn product, built in Beatrice, Nebraska, holds

the leading market share in its category in the United States.

Another pivotal year for Exmark was 1997. Not only did the company

celebrate its 15th anniversary, but it also became a division of

The Toro Company with corporate headquarters in Bloomington,

Minnesota. The added resources of The Toro Company have helped

to ensure Exmark's continued growth and market leadership.

32

WHAT'S NEW?

Model Naming System ..............................................................................4-5

Deck Construction ...................................................................................6-23

Step-Up Chart .........................................................................................24-25

Blade Fit Application Chart ..................................................................26-29

Walk-Behinds ..........................................................................................30-51

Stand-Ons ...............................................................................................52-59

Riders ...................................................................................................... 60-111

Benefits of Eco-Friendly ............................................................................112

Turf Management ................................................................................113-119

Utility Vehicles ..................................................................................... 120-123

Accessories and Options .................................................................. 124-142

Collection Systems ............................................................................ 143-152

Mulch Kit Chart ................................................................................... 153-155

Performance Products ...................................................................... 156-159

Mower Acres-Per-Hour Productivity ............................................... 160-161

Engine Specifications ........................................................................ 162-163

Engine Displacement/Horse Power Cross Reference ........................ 164

Warranty Information.................................................................................165

Model Year and Serial Number Charts ................................................. 166

Exmark Technical Support........................................................................167

TABLE OF CONTENTS

RED TECHNOLOGYOur advanced Onboard Intelligence Platform optimizes machine life, maximizes productivity, and dramatically increases fuel efficiency.

EXMARK® ENGINE Now offered exclusively on Quest and Radius E-Series mowers, Exmark’s durable, heavy duty 708cc V-Twin engine delivers a number of enhancements you simply won’t find on competitive brands. Touting a double-barrel carburetor designed for increased engine performance, self-cleaning airbox that diverts debris for longer filter life, and a quick-and-easy oil drain system for simpler maintenance.

SPREADER-SPRAYER Featuring the most advanced lean-to-steer technology imaginable, Exmark’s innovative spreader-sprayer provides exceptional hillside stability, easy-to-learn controls . . . Andnew profit potential.

QUEST 60" Exmark’s continued quest to provide professional-grade performance and cut quality in a residential mower inspired the addition of a 60” cutting deck to our Quest™ premium residential zero-turn lineup. Packed with pro-grade features, comfort and value, it’s perfect for large-property owners looking to get on and off their lawns quicker than ever.

REAR DISCHARGE DECK Now available with UltraCut™ rear-discharge cutting deck systems, Lazer Z® E-, X-, DS- and Radius Series mowers provide enhanced clipping control, reduced horsepower requirements and, best of all, the superior cut quality we’re famous for—and that only an Exmark can deliver.

Eco-Friendly Model

CW Clockwise

CCW Counter Clockwise

B Bagging

M Mulching

RADIUS® SERIES ZERO-TURN MOWERSThe all-new Radius family comes packed with the legendary innovation, durability, reliability and comfort you expect from an Exmark—all in a value package. Available in E-, S- and X-Series, each is engineered to provide the highest cutquality and the lowest total ownership and maintenance cost.

54

MODEL NAMING SYSTEM

PRODUCT LINE

SERIES ENGINE FUEL SYSTEM ENGINE BRAND

OPERATING WIDTH

DECK SERIES PACKAGE

LZ X 801 G KA 60 6 00ECMGVHLZPNNVVTQSQTTTSSAR SDUT

OESX

000180270452481500541651691700708710720

730732740742749801850902921940980

GECAPD

KAKCKUSBHNEMAC

202130323642485052546072

012346R

0003A1A2A3A4B1B2B3BCE0EPN0P0T0

PRODUCT LINEEC = CommercialMG = MetroVH = VikingLZ = LazerPN = PioneerRA = RadiusNV = NavigatorVT = VantageQS = Quest Front SteerQT = QuestTT = Turf TracerSS = Spreader SprayerAR = AeratorSD = Slicer SeederUT = Utility Vehicle

SERIES0 = No DesignationE = E-SeriesS = S-SeriesX = X-Series

FUEL SYSTEMG = CarburatedE = EFIC = Carburated 50 stateA = EFI 50 StateP = Propane 50 stateD = Diesel 50 state

ENGINE BRANDKA = KawasakiKC = KohlerKU = KubotaSB = SubaruHN = HondaEM = ExmarkAC = Arctic Cat

DECK SERIES0 = n/a1 = Stamped Deck2 = Fabricated Deck3 = UltraCut Series 34 = UltraCut Series 45 = Series 56 = UltraCut Series 6R = UltraCut Rear Discharge

PACKAGE 00 = Standard Configuration 03 = Standard Seat, Wide Pneumatic A1 = Suspension Seat, Wide Semi-Pneumatic A2 = Suspension Seat, Narrow Semi-Pneumatic A3 = Suspension Seat, Wide Pneumatic A4 = Suspension Seat, Narrow Pneumatic B1 = Suspension Platform, Wide Semi-Pneumatic B2 = Suspension Platform, Narrow Semi-Pneumatic B3 = Suspension Platform, Wide Pneumatic BC = Blade Brake Control E0 = Electric Start EP = Electronic Power Steering N0 = National Account - Sulky, Mulch Kit P0 = Pistol Grip T0 = RED Technology, Suspension Seat

76

ULTRACUT™ SERIES 6

STANDARD ON:LAZER Z® X-SERIES MODELS.

• 5.5" deck depth. • No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18" ) diameter spindle shaft. • Patented spherical bearing design on idler arm pivots requires only annual greasing. • Coned anti-scalp rollers.

A

B

D

C

E

GF

H

IJ

KL

OM

ULTRACUT SERIES 6 FEATURES

A. 5.5" deck depth. 4-point suspension. Full-floating. B. (3) 7-gauge steel reinforcement rings at spindle mounting area on 52," 60" & 72."

C. High-strength polymer belt covers.

D Coned anti-scalp rollers.

E. 10-gauge steel top.

F. 7-gauge steel side skirt.

G. Heavy-duty trim side wear guard.

H. No maintenance spindles, sealed and non-greasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

I. 18,500 fpm blade tip speed.

J. Patented flow-control baffles.

K. Patented spherical bearing design on idler arms requires only annual greasing.

L. No-maintenance, sealed ball bearings.

M. Flexible discharge chute reduces impact damage of trees and other obstacles.

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

98

SERIES 5

STANDARD ON:LAZER Z® DS-SERIES WITH SIDE-DISCHARGE

• 6.0" deck depth. • 10-gauge top reinforcement plate and 7-gauge

reinforcement rings. • No maintenance, sealed and non-greasable spindles;

7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

• Patented flow-control baffles. • Adjustable discharge baffle. • Coned anti-scalp rollers.

A

BC

F

E

D I

H

GK

J

ML

N

O

SERIES 5 FEATURES

A. 6.0" deck depth. 4-point suspension. Full-floating.

B. 10-gauge top reinforcement plate and (3) 7-gauge steel reinforcement rings at spindle mounting area.

C. No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75" diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

D. Adjustable front blow-out/vacuum baffle.

E. Adjustable discharge baffle.

F. Metal belt covers.

G. Coned anti-scalp rollers.

H. 10-gauge steel top.

I. 7-gauge steel side skirt.

J. Heavy-duty trim side wear guard

K. Patented flow-control baffles.

L. Patented spherical bearing design on idler arms requires only annual greasing.

M. Flexible discharge chute reduces impact damage of trees and other obstacles.

N. 18,500 fpm blade tip speed.

O. No-maintenance, sealed ball bearings.

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

1110

STANDARD ON:LAZER Z® DS-SERIES REAR-DISCHARGE LAZER Z® X-SERIES REAR-DISCHARGELAZER Z® E-SERIES REAR-DISCHARGERADIUS® S-SERIES REAR-DISCHARGE

• 5.5" deck depth. • 7-gauge high-strength low-alloy top plate and side-skirts. • DS-Series & X-Series - No maintenance, sealed and non-greasable

spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30 mm (1.18") diameter spindle shaft.

E-Series - No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 25mm- (.98") diameter spindle shaft.

• Counter rotating blade provides even clipping dispersion. • Durable through axle anti-scalp rollers. • Optional finish cut baffles.

ULTRACUT™ REAR DISCHARGE

ULTRACUT REAR DISCHARGE FEATURES

A. 5.5" deck depth. 4-point suspension. Full-floating. B. 7-gauge high-strength low alloy deck construction.

C. High-strength polymer belt covers.

D. Reinforced anti-scalp rollers.

E. Compression molded UHMW side bumper protects deck and follows ground contours.

F. Lazer Z DS-Series & X-Series - No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.

Lazer Z E-Series - No maintenance spindles and sealed and non-greasable. 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.

G. 18,500 fpm blade tip speed.

H. Patented spherical bearing design on idler arms requires only annual greasing.

I. No-maintenance, sealed ball bearings.

A

B

C

E

D

G

F

I

H

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

1312




B. 10-gauge steel top.

C. 7-gauge steel side skirt.

D. (3) 7-gauge steel reinforcement rings at spindle mounting area excludes LZE 48" & 52" models.

E. Heavy-duty trim side wear guard excludes 48" models.

F. No maintenance spindles, sealed and non-greasable. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.

G. 18,500 fpm blade tip speed.

H. Patented flow-control baffles.

I. Patented spherical bearing design on idler arms requires only annual greasing excludes Pioneer S-Series 60" and Radius X-Series.

J. High-strength polymer belt covers.

K. No-maintenance, sealed ball bearings.

L. Flexible discharge chute reduces impact damage of trees and other obstacles.

M. Coned anti-scalp rollers.

A

B

D

EC

F

JI

HG

L

K

M

STANDARD ON:LAZER Z® S-SERIESLAZER Z E-SERIESPIONEER® S-SERIES 60"RADIUS X-SERIESTURF TRACER® X-SERIESVANTAGE® 48," 52" & 60"

• 5.5" deck depth. • Three large, formed and welded 7-gauge steel reinforcement rings

on top of 60" & 72" decks provide superior strength and durability excludes LZE 48" & 52" models.

• No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75" diameter splined blade driver 25mm- (.98") diameter spindle shaft and splined blade driver.

• Patented spherical bearing design on idler-arm pivots requires only annual greasing.

• No-maintenance, sealed ball bearings.

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

1514


STANDARD ON:VIKING™ 48" METRO® 48"

• 5.0" deck depth, adjusts providing flexibility for varying cutting heights. • Sealed, greaseless spindles. • 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. • (3) 7-gauge steel reinforcement rings at spindle mounting area.

A

B

C

D E

H

G F

J

I

K




C. 7-gauge steel side skirt.

D. 7-gauge steel reinforcement rings at spindle mounting excludes Pioneer S-Series, Turf Tracer S-Series & Vantage 36" model.

E. Radius E- & S-Series (side-discharge)- 7.30"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver.

Pioneer S-Series 48" & 52" and Turf Tracer S-Series 36" & 48", Vantage 36" - 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 25mm- (.98") diameter spindle shaft.

Viking 48" and Metro 48" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

F. 18,500 fpm blade tip speed.

G. Patented flow-control baffles.

H. High-strength polymer belt covers standard on Pioneer S-Series 48" & 52" and Turf Tracer S-Series models.

I. No-maintenance, sealed ball bearings.

J. Flexible discharge chute reduces impact damage of trees and other obstacles.

K. Coned anti-scalp rollers except Metro and Viking 48".

STANDARD ON:RADIUS® E-SERIESRADIUS® S-SERIESPIONEER® S-SERIES 48" & 52" VANTAGE® 36"TURF TRACER S-SERIES

• 5.0" deck depth provides Exmark's signature cut. • Sealed, greaseless spindles require no maintenance year-round. • 7.75"-diameter cutter housing with 1.75"-diameter splined blade

driver and 25mm- (.98") diameter spindle shaft. • 10-gauge steel reinforcement plate on Vantage 36"

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

1716


STANDARD ON:PIONEER® E-SERIES

• 4.0" deck depth provides patented airflow technology. • Sealed, greaseless spindles require no maintenance year-round. • 7.50"-diameter cutter housing contains 17mm- (.67") diameter

spindle shaft and hex blade driver.

SERIES 2 FEATURES

A. Pioneer E-Series - 4.0" deck depth. 4-point suspension. Full-floating.

Viking 36" and Metro 32" & 36" - 5.0" deck depth. Rigid.


C. Pioneer E-Series - 10-gauge steel side skirt.

Viking 36" and Metro 32" & 36" - 7-gauge steel side skirt.

D. Pioneer E-Series - 7.50"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver.

Viking 36" and Metro 32" & 36" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.

E. 18,500 fpm blade tip speed.

F. Patented flow-control baffles.

G. High-strength polymer belt covers are standard on Pioneer E-Series.

H. No-maintenance, sealed ball bearings.

I. Flexible discharge chute reduces impact damage of trees and other obstacles.

J. Coned anti-scalp rollers.

STANDARD ON: VIKING™ 36" METRO® 32" & 36"

• 5.0" deck depth, adjusts providing flexibility for varying cutting heights. • Sealed, greaseless spindles require no maintenance year-round. • 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. • (2) 7-gauge steel reinforcement rings at spindle mounting area.

A

B

C

D

G

E

I

H

J

F

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

1918

SERIES 1 & SERIES 2

SERIES 1 STAMPED DECK FEATURES.STANDARD ON QUEST E-SERIES.

A. 4.0"-deck depth. 3-point suspension. Floating.

B. 42" unit - 2 blade, 13-gauge stamped steel.

C. Rolled deck edges for additional strength.

D. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.

E. 18,500 fpm blade tip speed.

F. Composite discharge chute reduces impact damage of trees and other obstacles.

G. Round anti-scalp rollers. H. Clean-out port.

STANDARD ON:QUEST® E-SERIESQUEST S-SERIES

• 4.0" deck depth with top discharge design. • Top discharge design enhances bagging performance. • Sealed, greaseless spindles require no maintenance year-round. • 5.50"-diameter cutter housing with 17mm-diameter spindle

shaft. • Easily removable for cleaning and service.

SERIES 2 FABRICATED DECK FEATURES.STANDARD ON QUEST S-SERIES.

A. 4.0"-deck depth. 3-point suspension. Floating.

B. 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded front bumper.

C. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.

D. 18,500 fpm blade tip speed.

E. Composite discharge chute reduces impact damage of trees and other obstacles.

F. Round anti-scalp rollers.

G. Clean-out port.

A

B

C

D

E

F

HG

A

BF

CD

E

G

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

2120

SPINDLE DESIGN & CONSTRUCTION

Series 5 & UltraCut™ Series 6 Spindle FeaturesStandard on:Lazer Z® DS-SeriesLazer Z X-Series

A. 7.75"-diameter cast aluminum spindle housing.

B. Double-rowed, dual triple lip seal, high-speed ball bearing assemblies, non-greasable.

C. 30 mm spindle shaft diameter at bearing.

D. Splined blade driver eliminates self tightening from impacts.

E. Spindle nut minimizes moisture from entering the spindle internals, retains bearing clamp load when servicing drive pulley.

F. Completely serviceable.

UltraCut™ Series 2, 3 & 4 Spindle Features

Standard on:Viking™ Metro®


B. Dual-sealed, high-speed bearing assemblies, non-greasable.

C. 1.0" spindle shaft diameter at bearing.

D. Spindle cap minimizes moisture from entering the spindle internals.

E. Spindle cavity is filled with grease to reduce condensation and moisture ingestion.

A

B

E

D

C

A

B

F

E

D

C

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

2322

SPINDLE DESIGN & CONSTRUCTION

A

B

F

E

D

C

UltraCut™ Series 3 Spindle FeaturesStandard on:Fig. 1Radius E-SeriesRadius S-Series (side-discharge)

Fig. 2Pioneer E-Series

A. Radius - 7.25"-diameter cast aluminum spindle housing.

Pioneer E-Series - 7.50"-diameter cast aluminum spindle housing.


C. 17mm diameter spindle shaft at bearing.

D. Hex blade driver eliminates self tightening from impacts.

UltraCut™ Series 3 & 4 Spindle FeaturesStandard on:Lazer Z® S-SeriesLazer Z E-SeriesPioneer® S-SeriesRadius S-Series (rear-discharge)Radius® X-SeriesTurf Tracer® X-SeriesTurf Tracer S-SeriesVantage®



C. 25 mm spindle shaft diameter at bearing.

D. Splined blade driver eliminates self tightening from impacts.

E. Spindle cap minimizes moisture from entering the spindle internals.

F. Spindle cavity is vented to reduce condensation and moisture ingestion.

A

B

D

C

A

B

C

D

Fig. 1

Fig. 2

DEC

K C

ON

STRU

CTI

ON

DEC

K C

ON

STRU

CTI

ON

2524

STEP-UP CHART

QTE QTS/QSS RAE RAS RAX LZE LZS LZX

ENGINE Exmark Exmark Exmark Kohler

Kawasaki FXHeavy-duty air

filter

Kawasaki FX Kohler

Heavy-duty air filter

Kawasaki FX Kohler


Kawasaki FX Kohler


HYDRO DRIVE SYSTEM

ZT2100 (42")ZT2200 (50")

ZT2200 (34"/42")ZT2800 (50"/60")

ZT2800 (48"/52")

ZT-3100 (60")

ZT-3100 (Side-Discharge)

ZT-3400 (Rear-Discharge)

ZT3400

UHT 12cc w/o fans

60"/72" unit w/ fans

UHT 12cc w/ fans UHT 12 & 16cc w/ fans

DECK

Series 1 4" deck depth



UltraCut Series 3

5" deck depth

UltraCut Series 3

5" deck depthRear Discharge

5.5" deck depth

UltraCut Series 45.5" deck depth

UltraCut Series 4

5.5" deck depth

Rear Discharge5.5" deck depth

(60"/72")

UltraCut Series 4

5.5" deck depth

UltraCut Series 6

5.5" deck depth

Rear Discharge5.5" deck depth

(60"/72")

SPINDLE 5.5" diameter17 mm shaft

5.5" diameter17 mm shaft


7.3" diameter17 mm shaft(Side-Discharge)

7.5" diameter17 mm shaft(Rear-Discharge)





SEAT 18" High BackNo armrests 18" Deluxe Commercial

High-Back

Deluxe w/ Seat Isolation

System

Premium Suspension w/ Seat Isolation

System

Commercial High-Back

A1/A2 modelshave premium

suspension seat

Deluxe w/ Seat Isolation Systemall units except A1/A2 models with premium

suspension seat w/ seat isolation

system

Premium Suspension w/ Seat Isolation

System

FRONT TIRES

11 x 4.0 (42")

13 x 5.0-6 (50")

pneumatic

11 x 4.0 (34"/42")

13 x 5.0 (50")pneumatic

13 x 6.5-6pneumatic

13 x 6.5-6pneumatic

13 x 6.5-6pneumatic

13 x 5.0-6semi-pneumatic

13 x 6.5.0-6 semi-pneumatic on A1

models

13 x 5.0-6 (48"/52")13 x 6.5-6 (60"/72")

semi-pneumatic

13 x 5.0-6 (52")

13 x 6.5 (60"/72")

semi-pneumatic

DRIVE TIRES

18 x 7.50-8 (42")

18 x 9.5 (50")

18 x 6.0-8 (34")

18 x 7.50-8 (42")

20 x 8.0-10 (50")

20 x 10-10 (60")

22 x 9.5-12 (48"/52")

22 x 10-10 (60")

23 x 9.5-12 (48"/52")

23 x 10.5-12 (60")

24 x 9.5-12 (48"/52")

24 x 10.5-12 (60")

23 x 9.5-12 (48"/52")24 x 12-12 (60"/72")

23 x 9.5-12 (48"/52")24 x 12-12 (60"/72")

23 x 9.5-12 (52")

24 x 12-12 (60"/72")

FUEL CAPACITY 2.9 gal. 2.9 gal. 7.0 gal. 7.0 gal. 7.0 gal. 8.0 gal.

12.0 gal. gas10.3 gal. propane

12.0 gal.

SPEED 7.0 mph 7.0 mph 8.0 mph 9.0 mph 10.0 mph

8.0 mph (48"/52")10.0 mph (60"/72")

10.0 mph

10.0 mph ( 52")

11.5 mph ( 60/72")

WARRANTY

30 Days Commercial

30 DaysCommercial 4-Year/500

Hours4-Year/750

Hours 4-Year/1,000 Hours 5-Year/1,250 Hours 5-Year/1,250 Hours 5-Year/1,500 Hours3 Year

Consumer3 Year

Consumer

STEP

-UP

STEP

-UP

2726

BLADE FIT APPLICATION CHART

Model Deck Width

Deck Model

Blade Length

Blade Hole

Serial Number

High Lift Notched

High Lift Solid

Extreme2 Medium Low Lift Mulch Optional

21"30"

Metro 21"Metro 26"

21" 21EC21 21"

Lower 29,999 n/a 1-213007 n/a n/a n/a n/a

850,000 Higher n/a 108-3759 108-0954 108-3762 116-4500 mulch

116-5005

21" M21 21" 220,000 Higher n/a 107-4276 n/a n/a n/a n/a

26" M26 26' 5/8" 510,000 Higher n/a 109-0343 n/a n/a 103-6422 n/a

30" EC30 15.40" 313,000,000Higher 116-6358 n/a n/a 120-9500 n/a n/a

Metro, Viking Hydro

Viking 5SStandard 5S

Variable

32"48"

322482483

16.25"

5/8"

All 103-6583 103-1577 116-5178 103-6738 103-6581 n/a

36"52"

362532533

18.00" All 103-6584 103-1578 116-5176 103-6580 103-6582 n/a

Vantage S & XTurf Tracer S & X

Turf Tracer 5STTHPMHP

Explorer

48" 483 16.25"5/8" 130,000

539,999 103-6583 103-1577 116-5178 103-6738 103-6581 n/a

15/16" 540,000 Higher 103-6401 103-6381 116-5177 103-6386 103-6391 n/a

36"52"

363522523524

18.00"

1/2" Lower 129,999 103-3228 103-3229 n/a 103-3226 103-3227 n/a

5/8" 130,000 539,999 103-6584 103-1578 116-5176 103-6580 103-6582 n/a

15/16" 540,000 Higher 103-6402 103-6382 116-5175 103-6387 103-6392 n/a

60"602603604

20.50"

1/2" Lower 129,999 103-3232 103-3233 n/a 103-3230 103-3231 n/a

5/8" 130,000 539,999 103-2530 103-1580 116-5173 103-2510 103-0301 n/a

15/16" 540,000 Higher 103-6403 103-6383 116-5175 103-6388 103-6393 n/a

Explorer

44" CD443 22.00"

1/2" Lower 129,999LH 103-3293 n/a n/a n/a n/a n/a

RH 103-3294 n/a n/a n/a n/a n/a

5/8" 130,000 Higher

LH 103-3235 n/a n/a n/a n/a n/a

RH 103-3234 n/a n/a n/a n/a n/a

52" CD523 26.00"

1/2" Lower 129,999LH 1-513875 n/a n/a LH 1-513973 n/a n/a

RH 103-3290 n/a n/a RH 103-3292 n/a n/a

5/8" 130,000 Higher

LH 103-3237 n/a n/a 1-523510 n/a n/a

RH 103-3234 n/a n/a 1-523511 n/a n/a

44" CD443 7.0" All n/a n/a n/a n/a n/a n/a

52" CD523 10.00"1/2" Lower 129,999 1-513972 n/a n/a n/a n/a n/a

5/8" 130,000 Higher 1-523508 n/a n/a 1-523512 n/a n/a

Navigator

42" 42CD 22.00"510,000Higher

n/a LH 103-4209 n/a n/a LH 103-9526 n/a

n/a RH 103-4210 n/a n/a RH 103-9527 n/a

48" 48CD 25.00"510,000Higher

n/a LH 103-4207 n/a n/a LH 103-9524 n/a

n/a RH 103-4208 n/a n/a RH 103-9525 n/a

Bold = Standard B=Bagging M=Mulching CW = Clockwise CCW = Counter Clockwise

BLA

DES

BLA

DES

2928

BLADE FIT APPLICATION CHART

Model Deck Width

Deck Model

Blade Length

Blade Hole Serial Number High Lift

NotchedHigh Lift

SolidExtreme2 Medium Low Lift Mulch Optional

Lazer Z HPLazer Z CT

PhazerQuest S-SeriesQuest E-Series

Quest SPPioneer E-SeriesPioneer S-Series

Radius

34"343 17.50" 5/8" 600,000 Higher 109-2548 109-2549 n/a 109-2551 109-3129 n/a

342 17.50" 5/8" 315,000,000 Higher n/a 115-5059 n/a 115-5062 115-5062 n/a

42"

422 21.25" 15/16" 790,000919,999 109-9982 n/a n/a n/a 116-1203 n/a

421422 21.60" 5/8" 920,000

314,999,999 n/a 110-6568 n/a 106-2247 106-2247 n/a

421422 21.60" 5/8" 315,000,000

Higher n/a 131-3939 N/A 131-3938 131-3938 n/a

44' 44315.25

5/8" 160,000539,999 103-2529 103-1579 116-5179 103-2509 103-2519 n/a

15/16" 540,000 Higher 103-6400 103-6380 116-5501 103-6385 103-6390 n/a

22.25" 15/16" 850,000 Higher 116-1037 n/a 116-5606 n/a 116-1047 n/a

46" 465 16.25" 15/16" 600,000 Higher 109-6460 109-6466 116-5496 103-8296 103-8288 n/a

48" 482483 16.25"

5/8" 160,000539,999 103-6583 103-1577 116-5178 103-6738 103-6581 n/a

15/16" 540,000Higher 103-6401 103-6381 116-5177 103-6386 103-6391 B - 109-6391

M - 109-6389

34"50"

342501502 17.50"

5/8" 920,000Higher n/a 115-5059 n/a 115-5062 115-5062 n/a

505 15/16" 600,000789,999 109-6461 109-6467 116-5497 103-9598 109-5876 n/a

52" 522523 18.00"

5/8" 220,000539,999 103-6584 103-1578 116-5176 103-6580 103-6582 n/a

15/16" 540,000 Higher 103-6402 103-6382 116-5175 103-6387 103-6392 B - 109-6392M - 109-6390

54" 541 18.75" 5/8" 315,000,000 Higher n/a 115-2454 115-4999 n/a 115-4999 n/a

56" 565 19.50" 15/16" 600,000 Higher 109-6462 109-6468 116-5498 103-9603 109-5877 n/a

60"602 20.50" 400,010,500 n/a 115-9649 n/a 115-5001 115-5002 n/a

603604 20.50" 15/16" 600,000 Higher 103-6403 103-6383 116-5174 103-6388 103-6393 n/a

Lazer ZAS, ASX, XP

XS, E, S, X, D, DSFrontRunnerPioneer RDTurf Ranger

Vantage S & XRadius RD

48" 484486 16.25" 15/16" 790,000

Higher 103-6401 103-6381 116-5177 103-6386 103-6391 n/a

52"522523524526

18.00"

1/2" Lower 129,999 103-3228 103-3229 n/a 130-3226 103-3227 n/a

5/8" 130,000539,999 103-6584 103-1578 116-5176 130-6580 103-6582 n/a

15/16" 540,000Higher 103-6402 103-6382 116-5175 103-6387 103-6392 n/a

60"602603604606

20.50"

1/2" Lower 129,999 103-3232 103-3233 n/a 103-3230 103-3231 n/a

5/8" 130,000539,999 103-2530 103-1580 116-5173 103-2510 103-0301 n/a

15/16" 540,000Higher 103-6403 103-6383 116-5174 103-6388 103-6393 n/a

60" 605 20.75" 15/16" 600,000 Higher 109-6463 109-6469 116-5499 103-8240 109-5396 n/a

66" 665 22.75" 15/16" 600,000 Higher 109-6464 109-6470 116-5500 103-9616 109-5878 n/a

72" 724726 24.50"

5/8" 190,000539,000 102-2531 103-1581 116-5172 103-2511 103-2521 n/a

15/16" 540,000 Higher 103-6404 103-6384 116-5171 103-6389 103-6394 n/a

72" 725 24.75" 15/16" 600,000 Higher 109-6465 109-6471 116-5501 103-9622 109-5879 n/a

60" 60RD 20.50" 15/16"313,000,000

Higher

n/a n/a CCW 116-8181

CCW 116-8196 n/a n/a

CW103-6403

CW103-6383

CW 116-5174

CW103-6388 n/a n/a

72" 72RD 24.50" 15/16"313,000,000

Higher

n/a n/a CCW 116-8503

CCW 116-8502 n/a n/a

CW103-6404

CW103-6384

CW 116-5171

CW103-6389 n/a n/a

Bold = Standard B=Bagging M=Mulching CW = Clockwise CCW = Counter Clockwise

BLA

DES

BLA

DES

3130

KEY FEATURES • Commercial grade and performance in a value-packaged

trim and finish mower.• Simple design for maximum balance and ease of maneuverability.• 5"-deep cutting deck provides Exmark® signature cut and superior

performance whether bagging or mulching.• Easy on/off bag design eliminates the need for levers and doors.• Innovative and durable front height adjustment replacing

traditional pivot style adjusters.• Single-point rear height adjustment allows operator to quickly

change cutting height.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTSCoated Bail Drive ...........................................................................116-7907Deck Wear Kit.................................................................................109-9329Door Handle Kit .............................................................................109-9326Engine Guard .................................................................................116-05229.5" Diameter Tire Kit ....................................................................109-9328Mulch Plug ......................................................................................116-0251Wheel Weight Kit ...........................................................................109-9331

For more information on Accessories see page 124-159

SPECIFICATIONSEngine – FJ180V Kawasaki engine governed to 3,300 rpm.Air Filter – Dual element air cleaner.Engine Deck – 5"-deep, 1/4"-thick die-cast aluminum.Drive System – Self-propelled; rear-wheel, gear-driven.

Transmission – Infinitely variable speed selection, dual wheel drive.Speed – 0 to 4.2 mph (6.4 kmph) forward.Speed Control – Fingertip control.Fuel Capacity – 2 quart integral fuel tank.Style – Fixed-deck, rear-discharge bagger standard with option to mulch.Width Available – 21" (53.3 cm).Cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.Blade-Tip Speed – Approximately 18,500 fpm.Blades – 1 blade at 20.5".Drive Tires – 9" x 2.5", semi-pneumatic.Safety Package – Zone start.Bag Capacity – 2.5 bushels (20 gallons).

COMMERCIAL 21 S-SERIESModelNumber Engine Controls Size Weight

Length with Handle

Height with handle1 Width Price

ECS180GKA21000 FJ180V Kawasaki® Self-Propelled Zone 21" 112 lbs 62.0" 38.0" 22.0" $

QUICK REFERENCE BLADES2 (QTY) 21"(1)

High Lift Solid 108-3759Extreme 2 108-0954Low-Lift 108-3762

Medium/Mulch 116-4500Mulching 116-5005

BELTSDrive 109-7299

2material is 0.135" thick alloy steel austempered to RC 38-44

WHEELS Front Drive

9" (standard) 109-8016 109-80329.5" 109-8026 109-8022

CABLESZone (Kawasaki) 116-0905

Drive 126-7397

1varies with 0.5" cutting selections.

WA

LKS

WA

LKS

3332

KEY FEATURES • Commercial performance and durability.• 5" deep cutting deck provides Exmark® signature cut and

superior performance whether bagging or mulching.• Innovative and durable front height adjustment replacing

traditional pivot style adjusters.• Single-point rear height adjustment allows operator to quickly

change cutting height.• Blade Brake Clutch (BBC) enables operator to disengage blades

without shutting down the engine.• Front engine guard protects valve cover and head gasket from

being damaged on trailers and helps when lifting.• Formed, steel-wear plates, are strategically placed on the edges

of the cutting deck to ensure that the deck is not damaged from impacts and abrasions.

• Drive and OPC bails are foam-coated to minimize vibration and fatigue.

• Mulch plug and rear door handle standard.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS 9.5" Diameter Tire Kit ....................................................................109-9328

Wheel Weight Kit ...........................................................................109-9331


SPECIFICATIONS Engine – FJ180V Kawasaki KAI engine governed to 3,300 rpm; GXV160 Honda engine governed to 3,300 rpm.Air Filter – Dual element air cleaner.Engine Deck – 5"-deep, 1/4"-thick die-cast aluminum.Drive System – Self-propelled; rear-wheel gear-driven.Transmission – Infinitely variable speed selection, dual wheel drive.Speed – 0.0 mph to 4.2 mph (6.6 kmph) forward.Speed Control – Fingertip control.Fuel Capacity – 1 gallon (3.8-L).Style – Fixed-deck, rear-discharge bagger and mulch plug standard.Width Available – 21" (53.3 cm).Cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.Blade-Tip Speed – Approximately 18,500 fpm.Blades – 1 blade at 20.5".Drive Tires – 9" x 2.5", semi-pneumatic.Safety Package – Zone start/Blade Brake Clutch (BBC).Bag Capacity – 2.5 bushels (20 gallons).

COMMERCIAL 21 X-SERIESModelNumber Engine Controls Size Weight

Length with Handle


ECX180CKA21000 FJ180V Kawasaki® KAI Self-Propelled Zone 21" 114 lbs 62.0" 38.0" 22.0" $

ECX160CHN21000 GXV160 Honda® Self-Propelled Zone 21" 112 lbs 62.0" 38.0" 22.0" $

ECX180CKA210BC FJ180V Kawasaki KAI Self-Propelled BBC 21" 115 lbs 62.0" 38.0" 22.0" $

QUICK REFERENCE BLADES2 (QTY) 21"(1)High Lift Solid 108-3759

Extreme 2 108-0954Low-Lift 108-3762

Medium/Mulch 116-4500Mulching 116-5005

BELTSDrive 109-7299BBC 110-1790

1varies with 0.5" cutting selections. 2material is 0.135" thick alloy steel austempered to RC 38-44

WHEELS Front Drive

9" (standard) 109-8016 109-80329.5" 109-8026 109-8022

CABLESZone (Honda) 116-4443

Zone (Kawasaki) 116-0905BBC 116-0901Drive 126-7397

Throttle 116-4424

WA

LKS

WA

LKS

3534

KEY FEATURES• Improve productivity, increase control and manage costs with a

deceptively light walk-behind mower.• Positive drive transmission holds side-hills and helps prevent

downhill "run-away".• Unit weighs more than a 21", but operator will not see additional

fatigue in operation due to balance of unit and increased coverage.

• Innovative and durable front height adjustment replacing traditional pivot style adjusters.

• Single-point rear height adjustment allows operator to quickly change cutting height.

• Self-tensioning belt drive to transmission – eliminates need for service adjustments and prolongs belt life.

• Welded steel cutting deck - constructed with 1/2" dia. side wear bars and 1" dia. bumper to protect front end and deck with metal side discharge cover.

• See page 165 for Exmark® warranty details

SPECIFICATIONS Engine – FJ180V Kawasaki KAI engine; governed to 3,500 rpm.Air Filter – Dual element air cleaner.Engine Deck – 4.6"-deep stamped steel with welded reinforcement.Drive System – Self-propelled, rear-wheel gear-driven.

Transmission – Infinitely variable speed selection.Speed – 0.0 mph to 4.2 (6.6 kmph) mph forward.Speed Control – Finger-tip control.Fuel Capacity – 1 gallon (3.8-L) fuel tank.Style – Fixed-deck. Ability to rear bag, side-discharge or mulch.Width Available – 30" (76 cm).Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.5" (1.3 cm) increments.Blade-Tip Speed – Approximately 18,500 fpm.Blades – 2 blades at 15.4".Front Tires– 9 x 2.5, semi-pneumatic.Drive Tires – 10 x 3.0, semi-pneumatic.Safety Package – Blade Brake Clutch (BBC).Bag Capacity – 2.5 bushels (20 gallons).

COMMERCIAL 30ModelNumber Engine Controls Size Weight

Length with Handle2


ECS180CKA30000 FJ180V Kawasaki® KAI Self-propelled 30" 170 lbs 68.0" 38.25" 31.9" $

2With handle in medium position. Varies with 0.5" cutting selections.

QUICK REFERENCEBLADES (QTY) 30"(2)

High-Lift Notched 116-6358Low-Lift 120-9500

BELTS 30"

Tranmission 116-7116Blade Clutch 121-5765Blade Drive 120-3335

ACCESSORIES & ATTACHMENTS High-Performance Mulch Kit .........................................................116-8841


CABLES 30"

Drive 126-1664BBC 121-2310

WA

LKS

WA

LKS

3736

METRO®

KEY FEATURES• High-clearance, well-balanced deck makes curb climbing and

trailering easier. • Choose from Exmark®'s exclusive Enhanced Control System (ECS)

or traditional pistol grip operator controls.• Drive belts can be changed quickly and easily without the use

of tools. • Drive-wheel pulleys and brake drums are designed for

simple, low-cost maintenance.• Molded discharge chute standard.• See page 165 for Exmark warranty details

E N H A N C E D C O N T R O L S Y S T E M

ACCESSORIES & ATTACHMENTS3-Bushel Bagger ............................................................................. GC3602

ECS Conversion Kit for Metro ...................................................... 103-2444

Equipment Cover - Large .............................................................. 116-1379

Mulching Kits

32" unit ......................................................................................... MK322

36" unit ......................................................................................... MK362

48" unit ...................................................................................... MK483Q

Operator Controlled Discharge ....................................................116-8430


ModelNumber Engine Controls Size Deck Weight Length Height

WidthDefl. Down

Width Defl. Up Price

MGS481GKA322P0 FS481V Kawasaki®

V-Twin Pistol 32" UltraCut™ Series 2 421 lbs 78.0" 40.0" 43.3" 32.7" $

MGS481CKA36200 FS481V Kawasaki V-Twin ECS 36" UltraCut

Series 2 456 lbs 77.3" 42.1" 47.0" 36.4" $

MGS481CKA48300 FS481V Kawasaki V-Twin ECS 48" UltraCut

Series 3 506 lbs 72.3" 42.1" 57.9" 48.1" $

WA

LKS

WA

LKS

3938

POWER COMPONENTSEngines – FS481V Kawasaki® V-Twin engine governed to 3,600 rpm.Air Filter – Standard Engine Manufacturer's air filter.

Drive System – Direct drive from transmission to double-belt wheel drives (single belt on 32").Transmission – 5-speed Peerless® 700-070A.Speed Control – Padded shift lever.Ground Speed – 2.0 mph (3.2 kmph) to 6.2 mph (10 kmph) forward, reverse assist.PTO Engagement – Mechanical blade engagement with blade brake.Fuel Capacity – 5-gallon (18.9-L) fuel tank.Drive Wheel Release – Gearbox in neutral allows unit movement without engine running.Deck Lift – Manual cutter housing and front caster spacer position adjustment.

DECKSStyle – Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch. UltraCut™ Series 2 on 32" and 36" units and UltraCut Series 3 on 48" unit.Widths Available – 32" (81.3 cm), 36" (91.4 cm) or 48" (121.9 cm).Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.Cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments.Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing and 1.0”-diameter spindle tube.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTEngine Deck – 7-gauge welded steel.Steering and Motion Control – Gear drive with pistol grip, forward/reverse assist or gear drive with Enhanced Control System (ECS), forward/reverse assist.Casters – .38" thick caster yoke arms.Front Caster Tires – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.Drive Tires – 32": 13 x 5.0-6, 4-ply Kenda Super Turf; 36" and 48": 13 x 6.5-6, 4-ply Kenda Super Turf. Turning Radius – True zero-turn.Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine. Mechanical Parking Brake – Standard. Brake bands.

METRO® QUICK REFERENCEBLADES (QTY) 32"(2) 36"(2) 48"(3)

High Lift Notched 103-6583 103-6584 103-6583High Lift Solid 103-1577 103-1578 103-1577

Low Lift 103-6738 103-6580 103-6738Mulch* 103-6581 103-6582 103-6581

Extreme 2 116-5178 116-5176 116-5178*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 32" 36" 48"

Transmission 1-323280 1-323280 1-323280Mower Drive 1-3233441 1-323238 1-323238Blade Drive 1-323734 1-323733 1-403174

DRIVE WHEELSWheel & Tire 130-8366 130-8364 130-8364

Tire Only 130-8368 130-8367 130-8367Complete Assembly* 126-4481 126-4482 126-4482

SEMI-PNEUMATIC CASTER WHEELS Complete 103-2171 103-2171 103-2171

MISCECS Conversion Kit 103-2444 103-2444 103-2444

1Single belt. *Includes sheave and brake drum

WA

LKS

WA

LKS

4140

VIKING®

KEY FEATURES• Features Exmark®'s exclusive Enhanced Control System (ECS).• High-clearance, well-balanced deck makes curb climbing and

trailering easier. • Molded discharge chute is standard.• See page 165 for Exmark warranty details


ACCESSORIES & ATTACHMENTS 3-Bushel Bagger ..............................................................................GC3602

Equipment Cover - Large ...............................................................116-1379

Weight Kit ....................................................................................... 103-2637

Mulching Kits

36" unit ..........................................................................................MK362

48" unit .......................................................................................MK483Q

Operator Controlled Discharge .................................................... 116-8430

StandOn...........................................................................................116-7223



WidthDefl. Down


VHS481GKA36200 FS481V Kawasaki® V-Twin ECS 36" UltraCut™

Series 2 481 lbs 77.3" 43.2" 47.0" 36.4" $

VHS481GKA48300 FS481V Kawasaki V-Twin ECS 48"

UltraCutSeries 3

531 lbs 72.3" 43.2" 57.9" 48.1" $

WA

LKS

WA

LKS

4342

POWER COMPONENTSEngines – FS481V Kawasaki® V-Twin engine governed to 3,600 rpm.Drive System –Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable selection from 0–6.2 mph (10.0 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. PTO Engagement – Mechanical blade engagement with blade brake.Fuel Capacity – 5-gallon (18.9-L) fuel tank.Drive-Wheel Release – Allows unit movement without engine running.Deck Lift – Manual cutter housing and front caster spacer position adjustment.

DECKSStyle – Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch. UltraCut™ Series 2 on 36" unit and UltraCut Series 3 on 48" unit.Widths Available – 36" (91.4 cm) or 48" (121.9 cm).Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.Cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.54 cm) increments.Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.40”-diameter cutter housing and 1.0”-diameter spindle tube.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTEngine Deck – 7-gauge, heavy-duty welded steel.Steering and Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Casters – .38" thick caster yoke arms.Front Caster Tires – Double-yoke, 9 x 3.50-4, smooth-tread, semi-pneumatic.Drive Tires – 16 x 6.5-8, 4-ply Turf Master.®

Tracking Adjustment – Insta-Track.Turning Radius – True zero-turn.Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine. Parking Brake – Lever-actuated mechanical compression.

VIKING® QUICK REFERENCEBLADES (QTY) 36"(2) 48"(3)

High Lift Notched 103-6584 103-6583High Lift Solid 103-1578 103-1577

Low Lift 103-6580 103-6738Mulch* 103-6582 103-6581

Extreme 2 116-5176 116-5178*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 36" 48"

Pump Drive A-Section 103-4760 103-4760Blade Drive 1-323735 1-403174

MISCAll Units

Above 32° FAll Units

Below 32° F

Hydro Oil Filter 109-4180 1-523541

DRIVE WHEELS All 36" and 48" with s/n 439,999 & below and 790,000 & above

Hub 1-602997 1-602997Tire Only 1-413474 1-413474Rim Only 1-603715 1-603715Complete 1-413473 1-413473

48" s/n 440,000 to 789,000Tire Only 1-613264Rim Only 1-603715Complete 1-613263

SEMI-PNEUMATIC CASTER WHEELS Complete 103-2171 103-2171

WA

LKS

WA

LKS

4544

TURF TRACER® S-SERIES

KEY FEATURES• Ground speeds up to 6.2 mph forward and 2.2 mph in reverse.• Features Exmark®’s exclusive Enhanced Control System (ECS).• Electric-start standard on FS600V engines and PCV650 Kohler

Propane.• Standard with 9 x 3.5-4 smooth tread, semi-pneumatic front

caster tires.• Large-capacity electromagnetic PTO clutch delivers maximum life

and durability.• Molded discharge chute is standard.• See page 165 for Exmark warranty details

ACCESSORIES & ATTACHMENTS3-Bushel Bagger (36" requires adapter) .........................................GC3602


Weight Kit ....................................................................................... 103-2637

Mulching Kits

36" unit ...................................................................................... 126-3258

48" unit ...................................................................................... 126-3259

52" unit .......................................................................................MK523Q

Operator Controlled Discharge (36" requires adapter) .............. 116-8430

Operator Controlled Discharged adapter ...........................116-7042

StandOn...........................................................................................116-7223

Turf Striping Kit

36" unit ...................................................................................... 126-5765

48" & 52" unit ...........................................................................126-5804




WidthDefl. Down


TTS481CKA36300 FS481V Kawasaki®

V-Twin ECS 36" UltraCut™ Series 3 573 lbs 77.7" 42.0" 47.5" 36.1" $

TTS481GKA48300 FS481V Kawasaki V-Twin ECS 48" UltraCut

Series 3 586 lbs 73.7" 42.0" 59.5" 48.1" $

TTS600GKA483E0 FS600V Kawasaki V-Twin Electric Start ECS 48" UltraCut

Series 3 606 lbs 73.7" 42.0" 59.5"" 48.1" $

TTS680PKC483E0 PCV680 Kohler EFI Electric Start Propane ECS 48" UltraCut

Series 3 741 lbs. 73.7" 42.0" 59.5"" 48.1" $

TTS541GKA52300 FS541V Kawasaki V-Twin ECS 52" UltraCut

Series 3 670 lbs 75.9" 42.0" 64.3" 53.0" $

TTS600GKA523E0 FS600V Kawasaki V-Twin Electric Start ECS 52" UltraCut

Series 3 690 lbs 75.9" 42.0" 64.3" 53.0" $

WA

LKS

WA

LKS

4746

POWER COMPONENTSEngines – FS481V, FS541V, & FS600V Kawasaki® V-Twin; PCV680 Kohler® EFI Propane. All engines are governed to 3,600 rpm.Air Filter – Standard Engine Manufacturer's air filter.Drive System –Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable selection from 0–6.2 mph (10.0 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.PTO Engagement – Magstop Electromechanical 105 ft lb clutch on gas models, 125 ft lb on propane model.Fuel Capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 20.0-lb (4.8 gallon) propane tank.Drive-Wheel Release – Allows unit movement without engine running.Deck Lift – Manual lift with hairpin from hole to hole for position adjustment.

DECKSStyle – Full-floating UltraCut™ Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.Widths Available – 36" (91.4 cm), 48" (121.9 cm) or 52" (132 cm).Deck Construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75”-diameter splined blade drive and 25mm (0.98") diameter spindle shaft.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTEngine Deck – 7-gauge, heavy-duty welded steel.Steering and Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Casters – .38" thick caster yoke arms.Front Caster Tires – Double-yoke, 9 x 3.5-4, smooth tread, semi-pneumatic.Drive Tires – 16 x 6.5-8, 4-ply Turf Master® on 36" models; 16 x 7.5-8, 4-ply Turf Master on all 48" and 52" models. Tracking Adjustment – Insta-Track.Turning Radius – True zero-turn.Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine. Parking Brake – Lever-actuated mechanical compression.Electrical System – Electric start models – 12-volt battery, 15-amp alternator except for PCV680 has 20-amp alternator. Recoil start models - 5-amp clutch coil.

TURF TRACER® S-SERIES QUICK REFERENCEBLADES (QTY) 36"(2) 48"(3) 52"(3)

High Lift Notched 103-6402 103-6401 103-6402Solid Lift Solid 103-6382 103-6381 103-6382

Low Lift 103-6387 103-6386 103-6387Mulch* 103-6392 103-6391 103-6392


BELTS 36" 48" 52"

Pump Drive 103-4761 103-4761 103-4761Deck Drive 126-2222 126-0783 126-0784

DRIVE WHEELS All 36" and 48" & 52" with s/n 919,999 & under

Hub 1-602997 1-602997 1-602997Tire Only 1-413474 1-613264 1-613264Rim Only 1-603715 1-603715 1-603715Complete 1-413478 1-613263 1-613263

All 36" and 48" & 52" with s/n 920,000 & aboveTire Only 1-613264 1-613264 1-613264Rim Only 1-603715 1-603715 1-603715Complete 1-613263 1-613263 1-613263

MISCAll Units


Below 32° F


SEMI-PNEUMATIC CASTER WHEELS Complete 103-2171 103-2171 103-2171

WA

LKS

WA

LKS

4948

TURF TRACER® X-SERIES


KEY FEATURES• Features Exmark®’s exclusive Enhanced Control System (ECS).• Standard with heavy-duty canister air filtration systems.• Large-capacity electromagnetic PTO clutch delivers maximum

life and durability.• Electric-start engines standard.• Standard with 11 x 4.0-5 smooth tread, semi-pneumatic, front

caster tires.• Molded discharge chute is standard.• See page 165 for Exmark warranty details

ACCESSORIES & ATTACHMENTS3-Bushel Bagger ..............................................................................GC3602


Mulching Kits

52" unit ..........................................................................................MK526

60" unit ..........................................................................................MK606

Operator Controlled Discharge .................................................... 116-8430

Rear Anti-Scalp Roller Kit ...............................................................116-4616

StandOn...........................................................................................116-7223

Turf Striping Kit

52" and 60" unit ....................................................................... 126-5812



WidthDefl. Down


TTX650EKC52400 ECV650 Kohler®

EFI Electric Start ECS 52" UltraCut™ Series 4 720 lbs 84.8" 45.0" 64.8" 53.4" $

TTX680PKC52400 PCV680 Kohler EFI Electric Start Propane ECS 52" UltraCut

Series 4 740 lbs 84.8" 45.0" 64.8" 53.4" $

TTX650EKC60400 ECV650 Kohler EFI Electric Start ECS 60" UltraCut

Series 4 760 lbs 84.8" 45.0" 73.0" 61.4" $

TTX650EKC604N0 ECV650 Kohler EFI Electric Start ECS 60" UltraCut

Series 4 840 lbs 104.8" 45.0" 73.0" 61.4" $

TTX680PKC60400 PCV680 Kohler EFI Electric Start Propane ECS 60" UltraCut

Series 4 780 lbs 84.8" 45.0" 72.0" 61.4" $

TTX691CKA60400 FX691V Kawasaki V-Twin Electric Start ECS 60" UltraCut

Series 4 760 lbs 84.8" 45.0" 72.0" 61.4" $

WA

LKS

WA

LKS

5150

POWER COMPONENTSEngines – FX691V Kawasaki V-Twin; ECV650 Kohler® EFI; PCV680 Kohler Command EFI Propane. All engines governed to 3,600 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System –Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid – Exmark Premium Hydro Oil.Speed – Infinitely variable selection from 0–6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.PTO Engagement – MagStop Electromagnetic 200 ft-lbs clutch.Fuel Capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 33.5-lb (8.0 gallon) propane tank.Drive-Wheel Release – Allows unit movement without engine running.Deck Lift – Manual lift with hairpin from hole to hole for position adjustment.

DECKSStyle – Full-floating UltraCut™ Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.Widths Available – 52" (132 cm) or 60" (152.4 cm). Deck Construction – 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 4-point suspension, full-floating deck with 6 adjustable anti-scalp rollers.Cutting Height – 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.25"-diameter cutter housing with 1.75"-diameter splined blade drive and 25mm (0.98") diameter spindle shaft. Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTEngine Deck – 7-gauge, heavy-duty welded steel.Steering and Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Casters – .38" thick caster yoke arms.Front Caster Tires – Double-yoke, 11 x 4.0-5, smooth tread, semi-pneumatic.Drive Tires – 18 x 8.5-8, 4-ply Turf Master.® Tracking Adjustment – Insta-Track.Turning Radius – True zero-turn.Safety Package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.Parking Brake – Lever-actuated mechanical compression.Electrical System – 12-volt battery, 15-amp alternator, except for Kohler EFI has 20-amp alternator.Engine Hour Meter – Standard.

TURF TRACER® X-SERIES QUICK REFERENCEBLADES (QTY) 52"(3) 60"(3)

High Lift Notched 103-6402 103-6403Solid Lift Solid 103-6382 103-6383

Low Lift 103-6387 103-6388Mulch* 103-6392 103-6393

Extreme 2 116-5175 116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 52" 60"

Pump Drive A-Section 103-4761 103-4761Deck Drive 126-2538 126-2539

DRIVE WHEELS s/n 320,000 & above

Hub 112-9041 112-9041Tire Only 103-2237 103-2237Rim Only 103-2238 103-2238Complete 103-1715 103-1715

SEMI-PNEUMATIC CASTER WHEELSComplete 109-3524 109-3524

MISCAll Units


Below 32° F


WA

LKS

WA

LKS

5352

VANTAGE® S-SERIES

KEY FEATURES• Ergonomically designed steering system includes an Adjustable

Front Reference bar that can control the top end speed of the machine.

• Self-compensating suspension makes standing more comfortable.• Platform folds up, allowing the machine to function like a

walk-behind.• Superior traction and handling allows you to mow changing

landscapes effortlessly.• Angled platform sides allow operator to shift his body weight for

smoother ride when mowing hillsides.• Precision-designed, maintenance-free spindles eliminate the need

for yearly greasing.• Integrated tie-down points for secure trailering.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS3-Bushel Bagger ....................................................................GC360236" requires adapter for bagger and OCD .........................116-7042Propane requires adapter for bagger ................................ 126-7623Anti-Scalp Roller Kit (36" unit - right front corner) .............................116-5305 (48" & 52" units - front of deck) ......................116-4608 (60" unit - left rear of deck) ....................116-4614Cup Holder ...........................................................................116-9676Equipment Cover - Large .....................................................116-1379Front Weight Kit .................................................................. 116-2935Jack ...................................................................................... 127-6666Jack Mount Receiver 36" unit ...........................................................................116-4414 48"/52"60" units ........................................................... 116-3300Light Kit ................................................................................ 116-3298Mulching Kits 36" unit ............................................................................116-4247 48" unit ...............................................................................MK486 52" unit ...............................................................................MK526 60" unit ...............................................................................MK606Operator Controlled Discharge .......................................... 116-8430Trash Container ................................................................... 116-3297


ModelNumber Engine Size Deck Weight

Length Platform

Up

Length Platform

Down HeightWidth

Defl. DownWidth

Defl. Up Price

VTS541CKA36300 FS541V Kawasaki®

V-Twin 36" UltraCut™ Series 3 790 lbs 61.5" 74.0" 51.5" 48.0" 39.1" $

VTS691CKA48400 FX691V Kawasaki V-Twin 48" UltraCut Series 4 855 lbs 60.5" 74.0" 50.0" 59.6" 51.8" $

VTS691CKA52400 FX691V Kawasaki V-Twin 52" UltraCut Series 4 866 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $

VTS730AKC52400 ECV730 Kohler Command EFI 52" UltraCut Series 4 866 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $

VTS740PKC52400 PCV740 Kohler EFI Propane 52" UltraCut Series 4 875 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $

VTS740PKC60400 PCV740 Kohler EFI Propane 60" UltraCut Series 4 915 lbs 62.4" 75.9" 50.0" 72.8" 63.9" $

VTS740EKC60400 ECV740 Kohler Command EFI 60" UltraCut Series 4 883 lbs 62.4" 75.9" 50.0" 72.8" 63.9" $

STA

ND

-ON

STA

ND

-ON

5554

POWER COMPONENTSEngines – FS541V and FX691V Kawasaki® V-Twin; ECV730 and ECV740 Kohler® Command™ EFI, PCV740 Kohler EFI Propane engines. All engines governed to 3,600 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System –Two Hydro-Gear® 10cc pumps powering two Parker 12 cubic inch motors. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.PTO Engagement – Warner 175-ft-lb clutch on 36" unit. Warner 200-ft-lb clutch on 48", 52" and 60" units.Fuel Capacity – 8-gallon, (30.2-L) single fuel tank with single fill location. Propane unit has 33.5-lb (8.0 gallon) propane tank.Drive-Wheel Release –Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators.Deck Lift – Standard. Mechanical lift-assist springs.

DECKSStyle – Full-floating UltraCut™ Series 3 on 36" unit and full-floating UltraCut Series 4 on 48", 52" and 60" units. Side-discharge standard with molded discharge chute and option to bag or mulch.Widths Available – 36" (91 cm), 48" (122 cm), 52" (132 cm) and 60" (152 cm).Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension.

Cutting Height – 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft. Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Welded, heavy-duty 1.5" x 3" tubular steel.Suspension Platform – Self-compensating elastomeric suspension. Stowable operator platform.Steering and Motion Control – Twin levers with no-tools adjustable front reference bar to modify forward ground speed. Casters – .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.Front Caster Tires – 11 x 4.0-5, smooth-tread, semi-pneumatic tires.Drive Tires – 18 x 8.5-8 Kenda Tires on 36" unit; 20 x 10.5-8 Kenda drive tires on 48", 52" and 60" units. Turning Radius – True zero-turn.Parking Brake – Lever-actuated bar brake.Electrical System – 12-volt battery with 15-amp alternator on Kawasaki. 20-amp on Kohler EFI.Engine Hour Meter – Standard.Cup Holder – Optional.

VANTAGE® S-SERIES QUICK REFERENCEBLADES (QTY) 36"(2) 48"(3) 52"(3) 60"(3)

High Lift Notched 103-6402 103-6401 103-6402 103-6403Solid Lift Solid 103-6382 103-6381 103-6382 103-6383

Low Lift 103-6387 103-6386 103-6387 103-6388Mulch* 103-6392 103-6391 103-6392 103-6393

Extreme 2 116-5175 116-5177 116-5175 116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 36" 48" 52" 60"

Pump Drive 119-0174 114567 114567 114567Blade Drive 116-3703 99-4627 116-3111 99-4627

DRIVE WHEELSWheel & Tire 116-4587 120-6465 120-6465 120-6465Wheel Only 116-4605 116-4605 116-4605 116-4605

Tire Only 116-4606 120-6466 120-6466 120-6466

FRONT CASTER WHEELSRim Only n/a n/a n/a n/aTire Only n/a n/a n/a n/aComplete 112-3810 112-3810 112-3810 112-3810

MISCAll Units


Below 32° F


STA

ND

-ON

STA

ND

-ON

5756

VANTAGE® X-SERIES

KEY FEATURES• Now comes with our patented Enhanced Control System (ECS)

for greater operator comfort and productivity. • Hydraulic drive system upgraded on X-Series to 12cc pump and

14 cubic inch wheel motor.• Self-compensating suspension makes standing more comfortable.• Platform folds up, allowing the machine to function like a

walk-behind.• Superior traction and handling allows you to mow changing

landscapes effortlessly.• Angled platform sides allow operator to shift his body weight for

smoother ride when mowing hillsides.• Precision-designed, maintenance-free spindles eliminate the need

for yearly greasing.• Integrated tie-down points for secure trailering.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS3-Bushel Bagger ....................................................................GC3602Anti-Scalp Roller Kit 48" & 52" units - front of deck ......................................................116-4608 60" unit - left rear corner ................................................................ 116-4614Cup Holder ...........................................................................116-9676Equipment Cover - Large .....................................................116-1379Front Weight Kit .................................................................. 116-2935Jack ...................................................................................... 127-6666Jack Mount Receiver ........................................................... 116-3300Light Kit ................................................................................ 116-3298Mulching Kits 48" unit ..............................................................................MK486 52" unit ..............................................................................MK526 60" unit ..............................................................................MK606Operator Controlled Discharge 52" & 60" unit ............................................................... 116-8430Trash Container ................................................................... 116-3297


ModelNumber Engine Controls Size Deck Weight

Length Platform

Up

Length Platform

Down HeightWidth

Defl. DownWidth

Defl. Up Price

VTX651GKA48400 FX651V Kawasaki®

V-Twin ECS 48" UltraCut™ Series 4 855 lbs 60.5" 74.0" 50.0" 59.6" 51.8" $

VTX730EKC52400 ECV730 Kohler® EFI ECS 52" UltraCut Series 4 875 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $

VTX740EKC60400 ECV740 Kohler EFI ECS 60" UltraCut Series 4 883 lbs 62.5" 76.0" 50.0" 72.8" 63.9" $


STA

ND

-ON

STA

ND

-ON

5958

POWER COMPONENTSEngines – FX651V Kawasaki® V-Twin; ECV730 & ECV740 Kohler® EFI engines. All engines governed to 3,600 rpm.Drive System – Two Hydro-Gear 12cc pumps powering two Parker 14 cubic inch motors.Air Filter – Heavy-duty canister air filtration system.Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.PTO Engagement – Warner 200-ft-lb clutch.Fuel Capacity – 8-gallon, (30.2-L) single fuel tank with single fill location.Drive-Wheel Release –Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators.Deck Lift – Standard. Mechanical lift-assist springs.

DECKSStyle – Full-floating UltraCut™ Series 4, side-discharge standard with molded discharge chute and option to bag or mulch.Widths Available – 48" (122 cm) and 52" (132 cm) and 60" (152 cm). Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension.Cutting Height – 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft. Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Welded, heavy-duty 1.5" x 3" tubular steel.Suspension Platform – Self-compensating elastomeric suspension. Stowable operator platform.Steering and Motion Control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Casters – .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.Front Caster Tires – 11 x 4.0-5, smooth-tread, semi-pneumatic tires.Drive Tires – 20 x 10.5-8 Kenda drive tires.Turning Radius – True zero-turn.Parking Brake – Lever-actuated bar brake.Electrical System – 12-volt battery with 15-amp alternator on Kawasaki units. 12-volt battery with 20-amp alternator on Kohler EFI unit.Engine Hour Meter – Standard.Cup Holder – Optional.

VANTAGE® X-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3)

High Lift Notched 103-6401 103-6402 103-6403Solid Lift Solid 103-6381 103-6382 103-6383

Low Lift 103-6386 103-6387 103-6388Mulch* 103-6391 103-6392 103-6393


BELTS 48" 52" 60"

Pump Drive 114567 114567 114567Blade Drive 99-4627 116-3111 99-4627

DRIVE WHEELSWheel & Tire 120-6465 120-6465 120-6465Wheel Only 116-4605 116-4605 116-4605

Tire Only 120-6466 120-6466 120-6466

FRONT CASTER WHEELSRim Only n/a n/a n/aTire Only n/a n/a n/aComplete 112-3810 112-3810 112-3810

MISCAll Units


Below 32° F


STA

ND

-ON

STA

ND

-ON

6160

QUEST® E-SERIES

KEY FEATURES • Deck is easily removed for servicing.• Hydrostatic control: Hydro-gear® ZT2100 (42") and ZT2200 (50").• Lever-actuated park braking system.• Standard engine guard for extra protection.• Spring-supported seat for operator comfort.• 3-gallon fuel tank with single fill location.• Ground speeds up to 7 mph.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS2-Bagger Collection System 42" unit Series 1 (requires 131-7658 Weight Kit & 131-3966 Mounting Kit) 126-6336 42" unit Series 2 .....................................................................126-7509 50" unit ...................................................................................126-7510Bagger Mount Kit .........................................................................131-3966Anti-Blowout Ring Kit 42" unit Series 1 ..................................................................... 114-1620 42" unit Series 2 .....................................................................121-5698 50" unit ..................................................................................121-5692Armrest Kit ................................................................................... 105-6978Bar and Step Assist Kit ......................................................................79339Cargo Carrier (Requires 131-7658 Weight Kit) ........................................... 79040Engine Maintenance Kit Single-Cylinder ....................................................................... 126-9301 V-Twin .......................................................................................126-9287Equipment Cover - Small.............................................................. 116-1378Hitch Kit ..............................................................................................79014 Hour Meter ....................................................................................116-5461Jack ............................................................................................... 127-6666Jack Mount Receiver .....................................................................126-5251Mulching Kit 42" unit Series 1 ......................................................................131-7708 42" unit Series 2 ......................................................................131-7709 50" unit .....................................................................................116-6514 Rubber Floor Mat ........................................................................ 126-6502Trash Container ............................................................................ 126-8378Turf Striping Kit 42" unit Series 1 ..................................................................... 120-7905 42" unit Series 2 ......................................................................121-5702 50" ............................................................................................121-5706Weight Kit ......................................................................................131-7658


ModelNumber Engine Size Deck Weight Length Height

WidthDefl. Down


QTE452CEM42100 452cc Exmark® 42" Series 1 stamped 511 lbs 71.8" 40.7" 53.8" 45.3" $

QTE708GEM42200 708cc Exmark® 42" Series 2 fabricated 555 lbs 71.8" 40.7" 54.1" 43.2" $

QTE708GEM50200 708cc Exmark® 50" Series 2 fabricated 630 lbs 72.9" 42.9" 61.7" 50.6" $

RID

ERS

RID

ERS

6362

POWER COMPONENTSEngines – 452cc Exmark and 708cc Exmark® V-Twin, governed to 3,300 rpm.Air Filter – Standard Engine Manufacturer's air filter.Drive System –Dual hydro static transmission with no hoses and integrated cooling fans and integrated reservoir. Hydro-Gear® ZT2100 on 42" unit. Hydro-Gear ZT2200 on 50" unit. Hydro Fluid – Exmark Premium Hydro oil on 50" unit.Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.PTO Engagement – MagStop electromagnetic 80-ft-lbs clutch on 42". MagStop electromagnetic 105-ft-lbs clutch on 50".Fuel Capacity – 3.0-gallon (11.0-L) single fuel tank with single fill location.Drive-Wheel Release –Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock.Deck Lift – Standard. Hand lever lift.

DECKSStyle – Exmark® Series 1 stamped steel deck. Series 2 fabricated and welded steel deck. Both decks have side-discharge standard with the option to bag or mulch.Widths Available – 42" (107 cm) and 50" (127 cm).Deck Construction – 42" Series 1 unit has 13-gauge stamped steel deck shell. Formed spindle mounting locations for improved strength and reduced weight. 3 point suspension. Series 2 units have 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard hand lever lift.Blade Spindles – No maintenance, sealed and non-greasable spindles. 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft. Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, riveted 10-gauge steel.Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions.Casters – .25" thick caster yoke arms.Front Caster Tires – 11 x 4-5 ribbed tread, pneumatic on 42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit.Drive Tires – 18 x 7.50-8, 4-ply Turf Tech TL on 42" unit. 18 x 9.50-8, 4-ply Turf Tech TL on 50" unit.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – Units have 18" high-back foam padded seat (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat. Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Optional.Cup Holder – Standard.

QUEST® E-SERIES QUICK REFERENCEBLADES (QTY) 421 (2) 422 (2) 502 (3)

High Lift Solid 131-3939 131-3939 115-5059Extreme 2 n/a n/a n/a

Low Lift/Mulch* 131-3938 131-3938 115-5062*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 421 422" 502

Pump Drive 130-6975 130-6975 130-6976Blade Drive 119-8819 119-8819 119-8820

DRIVE WHEELSRim Only 131-3674 131-3674 131-3675Tire Only 131-3678 131-3678 131-3679Complete 131-3671 131-3671 131-3672

CASTER WHEELSRim Only n/a n/a 119-3472Tire Only 130-0735 130-0735 119-3471Complete 130-0736 130-0736 119-3473

RID

ERS

RID

ERS

6564

QUEST® S-SERIES DRIVE LEVERS

KEY FEATURES• Deck is easily removed for servicing.• Lever-actuated park braking system.• Standard engine guard for extra protection.• Spring-supported seat for operator comfort.• 3-gallon fuel tank with single fill location.• Ground speeds up to 7 mph.• Rubber floor mat is standard.• Engine hour meter and hitch kit is standard.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS2-Bagger Collection System 34" unit .................................................................................... 126-7508 42" unit .................................................................................... 126-7509 50" unit ....................................................................................126-7510 60" unit ...................................................................................135-0332Bagger Mount Kit ......................................................................... 131-3966Anti-Blowout Kit 34" unit .....................................................................................131-4168 42" unit .................................................................................... 121-5698 50"/60" unit............................................................................. 121-5692Bar and Step Assist Kit ......................................................................79339Cargo Carrier (Requires 131-7658 Weight Kit) .........................................79040Engine Maintenance Kit Single-Cylinder ....................................................................... 126-9301 V-Twin .......................................................................................126-9287Equipment Cover 34"/42"/50" Small ....................................................................116-1378 60" Large .................................................................................116-1379Jack ................................................................................................127-6666Jack Mount Receiver ..................................................................... 126-5251Rubber Floor Mat ..........................................................................126-6502Mulching Kit 34" unit .....................................................................................131-7110 42" unit .................................................................................... 131-7709 50" unit ....................................................................................116-6514 60" unit ...................................................................................135-0333Trash Container .............................................................................126-8378Turf Striper 34" unit .....................................................................................131-4167 42" unit .................................................................................... 121-5702 50" unit ................................................................................... 121-5706Weight Kit ......................................................................................131-7658



WidthDefl. Down


QTS452CEM34200 452cc Exmark® 34" Series 2 fabricated 520 lbs 74.7" 45.4" 45.6" 34.7" $

QTS708GEM42200 708cc Exmark 42" Series 2 fabricated 561 lbs 71.8" 40.7" 54.1" 43.2" $

QTS708GEM50200 708cc Exmark 50" Series 2 fabricated 638 lbs 72.9" 42.9" 61.7" 50.6" $

QTS708GEM60200 708cc Exmark 60" Series 2 fabricated 728 lbs 82.1" 42.9" 75.2" n/a $

RID

ERS

RID

ERS

6766

POWER COMPONENTSEngines – 452cc, 708cc Exmark® engines, governed to 3,300 rpm.Air Filter – Standard Engine Manufacturer's air filter.Drive System – Dual Hydro-Gear® ZT2200 hydro static transmissions with no hoses, integrated cooling fans, integrated reservoir on 34"/42" unit. Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components on 50"/60" models. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.PTO Engagement – MagStop electromagnetic 80-ft-lbs clutch on 34"/42" unit. MagStop electromagnetic 105-ft-lbs clutch on 50"/60" models.Fuel Capacity – 2.9-gallon (11.0-L) single fuel tank.Drive-Wheel Release –Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock.Deck Lift – Standard. Hand lever lift. Foot-assist lifts the deck to maneuver around obstacles.

DECKSStyle – Exmark® Series 2 fabricated and welded steel deck. Side-discharge standard with the option to bag or mulch.Widths Available – 34" (86 cm) 42" (107 cm), 50" (127 cm) 60" 152 (cm).Deck Construction – 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard hand lever or foot-operated assist.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, riveted 10-gauge steel.Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions.Casters – .25" thick caster yoke arms.Front Caster Tires – 11 x 4-5 ribbed tread, pneumatic on 34"/42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit. 13 x 6.5-6, smooth pneumatic on 60" unit.Drive Tires – 18 x 6-8, 4-ply Turf Tech TL on 34" unit. 18 x 7.50-8, 4-ply Turf Tech TL on 42" unit. 20 x 10-10, 2-ply Turf Tech TL on 50"/60" units.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.Hitch – Standard.

QUEST® S-SERIES DRIVE LEVERS QUICK REFERENCEBLADES (QTY) 34"(2) 42"(2) 50"(3) 60"

High Lift Solid 115-5059 131-3939 115-5059 115-9649Low Lift 115-5062 131-3938 115-5062 115-5001Mulch* 115-5062 131-3938 115-5062 115-5002

*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 34" 42" 50" 60"

Pump Drive 130-6975 130-6975 130-6976 133-4371Blade Drive 130-0842 119-8819 119-8820 109-3661

DRIVE WHEELSRim Only 119-3423 107-2475 133-9291 133-9291Tire Only 131-3677 131-3678 133-9293 133-9293Complete 131-3670 131-3671 133-9278 133-9278

CASTER WHEELSRim Only 115-2556 115-2556 119-3472 133-4425Tire Only 130-0735 130-0735 119-3471 125-5581Complete 130-0736 130-0736 119-3473 133-4427

MISC 50"Hydro Oil Filter 109-3321

RID

ERS

RID

ERS

6968

QUEST® S-SERIES FRONT STEER

KEY FEATURES• Deck is easily removed for servicing.• Smart Park - The park brake engages automatically whenever

the operator gets off the seat, or when the key switch is shut off. The brake disengages simply by depressing the foot pedal.

• Key Choice - This advanced safety feature allows the operator to select whether or not to utilize the cutting deck in reverse. If the key is removed, the deck will become disengaged in reverse.

• Standard engine guard for extra protection.• Spring-supported seat for operator comfort.• 3-gallon fuel tank with single fill location.• Ground speeds up to 7 mph.• Engine hour meter and hitch kit is standard.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS2-Bagger Collection System

42" unit .................................................................................... 126-7509

50" unit ....................................................................................126-7510

Bagging Mounting Kit .................................................................. 131-3966Anti-Blowout Kit 42" unit .................................................................................... 121-5698 50" unit ................................................................................... 121-5692

Engine Maintenance Kit ............................................................... 126-9287

Equipment Cover - Small...............................................................116-1378

Jack ................................................................................................127-6666

Jack Mount Receiver ..................................................................... 126-5251

Mulching Kit

42" unit .................................................................................... 131-7709

50" unit ....................................................................................116-6514

Rubber Floor Mat ..........................................................................126-6501

Turf Striper

42" unit .................................................................................... 121-5702

50" unit ................................................................................... 121-5706



WidthDefl. Down


QSS708GEM42200 708cc Exmark® 42" Series 2 fabricated 645 lbs 81.7" 42.8" 54.1" 43.2" $

QSS708GEM50200 708cc Exmark 50" Series 2 fabricated 713 lbs 81.7" 42.8" 61.7" 50.6" $

RID

ERS

RID

ERS

7170

POWER COMPONENTSEngines – 708cc Exmark® engine, governed to 3,300 rpm.Air Filter – Standard Engine Manufacturer's air filter.Drive System – Dual Hydro-Gear® ZT2200 hydro static transmissions with no hoses, integrated cooling fans, integrated reservoir on 42" unit. Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components on 50" unit. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.PTO Engagement – MagStop electromagnetic 80-ft-lbs clutch on 42" unit. MagStop electromagnetic 105-ft-lbs clutch on 50" unit.Fuel Capacity – 3.0-gallon (11.0-L) single fuel tank.Drive-Wheel Release –Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock.Deck Lift – Standard. Lever lift. Foot-assist lifts the deck to maneuver around obstacles.Key Choice – Standard. Allows the operator to select whether or not to utilize the cutting deck in reverse. If the key is removed, the deck will become disengaged in reverse.

DECKSStyle – Exmark® Series 2 fabricated and welded steel deck. Side-discharge standard with the option to bag or mulch.Widths Available – 42" (107 cm) and 50" (127 cm).Deck Construction – 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.

Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard foot-operated assist.Blade Spindles – No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, riveted 10-gauge steel.Steering and Motion Control – Steering wheel controls direction of front casters and independent hydraulic transaxles in a turn for maximum control. Steering column is adjustable to operator preference.Casters – .25" thick caster yoke arms.Front Caster Tires – 11 x 4-5 ribbed tread, pneumatic on 42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit.Drive Tires – 18 x 7.50-8, 4-ply Turf Tech TL on 42" unit. 20 x 8.0-10, 4-ply Super Turf® on 50" unit.Turning Radius – True zero-turn.Parking Brake – The park brake engages automatically whenever the operator gets off the seat, or when the key switch is shut off. The brake disengages simply by depressing the foot pedal.Seat – Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.Hitch – Standard.

QUEST® S-SERIES FRONT STEER QUICK REFERENCEBELTS 42" 50"

Pump Drive 130-6975 130-6976Blade Drive 119-8819 119-8820

DRIVE WHEELSRim Only 107-2475 109-5270Tire Only 131-3678 131-3680Complete 131-3671 131-3673

CASTER WHEELSRim Only 119-3472 119-3472Tire Only 119-3471 119-3471Complete 119-3473 119-3473

MISC 50"

Hydro Oil Filter 109-3321

BLADES (QTY) 42"(2) 50"(3)

High Lift Solid 131-3939 115-5059Low Lift 131-3838 115-5062Mulch* 131-3838 115-5062


RID

ERS

RID

ERS

7372

RADIUS® E-SERIES

ACCESSORIES & ATTACHMENTS3-Bushel Bagger (Accessory Adapter needed for 48"/52") ............GC3602Accessory Adapter (48"/52").............................................................126-7496Engine Maintenance Kit ....................................................................126-9287Equipment Cover - Large .................................................................. 116-1379Front Bucket Mount Kit .................................................................... 126-8401Front Bucket Mount ...........................................................................126-70115-Gallon Bucket .................................................................................126-5105Hydro Maintenance Kit ......................................................................126-9867Jack .................................................................................................... 127-6666Light Kit ............................................................................................. 126-5382Mulching Kits 48" unit ........................................................................................MK483Q 52" unit.........................................................................................MK523Q 60" unit ........................................................................................MK603QOperator Controlled Discharge ....................................................... 126-8582Seat Cover - Standard ...................................................................... 126-9352Seat Cover - Suspension (fits 126-8292) ......................................... 126-9353Semi-Pneumatic Tire Assembly ........................................................126-9367Sun Shade .......................................................................................... 126-8077Suspension Seat ................................................................................ 126-8292Suspension Seat Kit .......................................................................... 126-9869Seat Suspension Upgrade Kit .......................................................... 126-9868Trash Container ................................................................................. 126-8378Turf Striper ..........................................................................................126-7882UltraVac E-Series (2-Bagger Powered Collection System) Fits all units ..................................................................................126-6122UltraVac E-Series Completing Kits 48" ................................................................................................126-6196 52" ................................................................................................126-6197 60" ................................................................................................126-6198UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units ................................................................................. 126-6954UltraVac S-Series Completing Kits 48" ............................................................................................... 126-8272 52" ............................................................................................... 126-8273 60" ................................................................................................126-8274


KEY FEATURES• Patented cutting-deck design yields professional results.• Hydro-Gear ZT2800 on 48"/52" and ZT3100 on 60" hydrostatic

drive system delivers a smooth drive experience and years of reliable service.

• Every Radius model is equipped with large, 13" x 6.5" pneumatic tires front caster tires.

• Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

• Intergrated rear tow hitch standard on all Radius models. • Easy to Service—A tools-free removable foot rest eases access

to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. The welded jack receiver allows quick access to the underside of the deck when combined with the optional jack.



WidthDefl. Down


RAE708GEM48300 708cc Exmark® 48" UltraCut™ Series 3 849 lbs 81.7" 69.7" 59.5" 52.6" $

RAE708GEM52300 708cc Exmark 52" UltraCut Series 3 862 lbs 81.7" 69.7" 64.3" 57.3" $

RAE708GEM60300 708cc Exmark 60" UltraCut Series 3 901 lbs 82.2" 69.7" 72.3" 61.7" $

RID

ERS

RID

ERS

7574

POWER COMPONENTSEngine – 708cc Exmark® engine; governed to 3,600 rpm.Air Filter – Standard engine manufacturer’s air filter.Drive System – Dual Hydro Gear ZT2800 on 48" & 52" models. Dual Hydro Gear ZT3100 on 60" model. All have hydrostatic transmission with charge pumps, relief valves and independent, spin-on filter. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.PTO Engagement – MagStop electromagnetic 125-ft-lb clutch.Fuel Capacity – 7-gallon (26.5-L) single fuel tank with single fill location.Drive-Wheel Release – Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating, UltraCut™ Series 3. Side-discharge standard with molded discharge chute and the option to bag or mulch.Widths Available – 48" (122 cm) 52" (132 cm) and 60" (152 cm).Deck Construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. Adjustable, anti-scalp rollers.Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.

Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm-(.67") diameter spindle shaft and hex blade drive.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.Steering and Motion Control – Hydraulically dampened twin levers adjustable both fore and aft. Levers are also adjustable to 2-height positions.Casters – 0.375"-thick caster yoke arms.Front Caster Tires – 13 x 6.5-6, smooth tread, pneumatic.Drive Tires – 22 x 9.5-12 on 48" & 52" models. 22 x 10.5-12 on 60" model.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – High back seat with foam padded seat cushion, armrests and integral safety switch.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.Tow Hitch – Standard.Jack Receiver – Standard.

RADIUS® E-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3)

Notched Air Foil 103-6401 103-6402 103-6403Solid Air Foil 103-6381 103-6382 103-6383

Low Lift 103-6386 103-6387 103-6388Mulching* 103-6391 103-6392 103-6393

eXtreme 2 Mulching 116-5177 116-5175 116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52" 60"



PNEUMATIC TIRE ASSEMBLYRim Only n/a n/a n/aTire Only 126-5959 126-5959 126-5959Complete 126-4860 126-4860 126-4860

MISC All Units


RID

ERS

RID

ERS

7776

RADIUS® S-SERIES

ACCESSORIES & ATTACHMENTSEngine Maintenance Kit - Kohler .................................................126-9288Equipment Cover - Large ..............................................................116-1379Front Bucket Mount Kit ................................................................126-8401Front Bucket Mount .......................................................................126-70115-Gallon Bucket ............................................................................ 126-5105Hydro Maintenance Kit ................................................................. 126-9867Jack ................................................................................................127-6666Light Kit .........................................................................................126-5382Seat Cover - Suspension ..............................................................126-9353Semi-Pneumatic Tire Assembly ................................................... 126-9367Sun Shade ......................................................................................126-8077Suspension Seat Kit ...................................................................... 126-9869Trash Container .............................................................................126-8378SIDE-DISCHARGE ONLY3-Bushel Bagger (Accessory Adapter needed for 48"/52") ........GC3602Accessory Adapter (48"/52") ........................................................ 126-7496Mulching Kits 48" unit ....................................................................................MK483Q 52" unit .....................................................................................MK523Q 60" unit ....................................................................................MK603QOperator Controlled Discharge ...................................................126-8582Turf Striper ..................................................................................... 126-7882UltraVac E-Series (2-Bagger Powered Collection System) Fits all units ............................................................................. 126-6122UltraVac E-Series Completing Kits 48" ........................................................................................... 126-6196 52" ........................................................................................... 126-6197 60" ........................................................................................... 126-6198UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units .............................................................................126-6954UltraVac S-Series Completing Kits 48" ...........................................................................................126-8272 52" ...........................................................................................126-8273 60" ........................................................................................... 126-8274REAR-DISCHARGE ONLYFinish Cut Baffles ...........................................................................116-8547Side Wear Bar Kit with front anti-scalp roller .............................. 127-6650White non-marking side bumper .................................................126-0854


KEY FEATURES• Patented cutting-deck design yields professional results.• Hydro-Gear ZT3100 (side-discharge) and ZT3400 (rear-

discharge) hydrostatic drive system delivers a smooth drive experience and years of reliable service.

• Exclusive adjustable isolation technology which helps to increase operator isolation from vibration and bumps.

• Every Radius model is equipped with large, 13" x 6.5" pneumatic tires front caster tires.

• Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

• Intergrated rear tow hitch standard on all Radius models. • Easy to Service—A tools-free removable foot rest eases access




WidthDefl. Down


RAS710CKC48300 ZT710 Kohler® 48" UltraCut™ Series 3 873 lbs 81.7" 70.2" 59.5" 52.6" $

RAS720CKC52300 ZT720 Kohler 52" UltraCut Series 3 892 lbs 81.7: 70.2" 64.3" 57.3" $

RAS740CKC60300 ZT740 Kohler 60" UltraCut Series 3 941 lbs 82.2" 70.2" 72.3" 61.7" $

RAS740GKC60R00 ZT740 Kohler 60" UltraCut Rear Discharge 1012 lbs 84.3" 70.2 66.0" n/a $

RID

ERS

RID

ERS

7978

POWER COMPONENTSEngines – ZT710, ZT720 and ZT740 Kohler® engines; governed to 3,700 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Dual Hydro Gear ZT3100 on side-discharge units. Dual Hydro Gear ZT3400 on rear discharge unit. Hydrostatic transmission with charge pumps, relief valves and spin-on filter. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.PTO Engagement – MagStop electromagnetic 125-ft-lb clutch.Fuel Capacity – 7-gallon (26.5-L) single fuel tank with single fill location.Drive-Wheel Release – Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating 5.0"-deep UltraCut™ Series 3. Side-discharge standard with molded discharge chute and option to bag or mulch. Rear-discharge decks have UltraCut™ Rear Discharge cutting deck with option to mulch.Widths Available – 48" (122 cm) 52" (132 cm) and 60" (152 cm).

Deck Construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. Adjustable, anti-scalp rollers.Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67”) diameter spindle shaft and hex blade drive on side-discharge. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver on rear-discharge. Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.Steering and Motion Control – Hydraulically dampened twin levers adjustable both fore and aft. Levers are also adjustable to 2-height positions.Casters – 0.375"-thick caster yoke arms.Front Caster Tires – 13 x 6.5-6, smooth tread, pneumatic.Drive Tires – 23 x 9.5-12 on 48" & 52" models. 23 x 10.5-12 on 60" models.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – High back seat with foam padded seat cushion , armrests, integral safety switch, and adjustable Seat Isolation System.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.Tow Hitch – Standard.Jack Receiver – Standard.

RADIUS® S-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3) 60" Rear(3)

Notched Air Foil 103-6401 103-6402 103-6403 CW (2)103-6403

Solid Air Foil 103-6381 103-6382 103-6383 n/a

Low Lift 103-6386 103-6387 103-6388CCW

116-8196CW

103-6388Mulching* 103-6391 103-6392 103-6393 n/a

eXtreme 2 Mulching 116-5177 116-5175 116-5174CCW (1)

116-8181CW

116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52" 60" 60" Rear

Pump Drive 126-5993 126-5993 126-5993 126-5993Blade Drive 126-6626 126-7443 126-6627 126-6628

Right Blade Drive n/a n/a n/a 116-8187


PNEUMATIC TIRE ASSEMBLYRim Only n/a n/a n/a n/aTire Only 126-5959 126-5959 126-5959 126-5959Complete 126-3289 126-3289 126-3289 126-3289

MISC All Units


CW = Clockwise CCW = Counter Clockwise

RID

ERS

RID

ERS

8180

RADIUS® X-SERIES

ACCESSORIES & ATTACHMENTS3-Bushel Bagger (Accessory Adapter needed for 48"/52") ........GC3602Accessory Adapter (48"/52") ........................................................ 126-7496Engine Maintenance Kit - Kawasaki .............................................126-9289Equipment Cover - Large ..............................................................116-1379Front Bucket Mount Kit ................................................................126-8401Front Bucket Mount .......................................................................126-7011Hydro Maintenance Kit ................................................................. 126-98675-Gallon Bucket ............................................................................ 126-5105Jack ................................................................................................127-6666Light Kit .........................................................................................126-5382Mulching Kits 48" unit .......................................................................................MK486 52" unit ........................................................................................MK526 60" unit .......................................................................................MK606Operator Controlled Discharge ...................................................126-8582Seat Cover - Suspension ..............................................................126-9353Semi-Pneumatic Tire Assembly ................................................... 126-9367Sun Shade ......................................................................................126-8077Trash Container .............................................................................126-8378Turf Striper ..................................................................................... 126-7882UltraVac E-Series (2-Bagger Powered Collection System) Fits all units ............................................................................. 126-6122UltraVac E-Series Completing Kits 48" ...........................................................................................126-6209 52" ...........................................................................................126-6210 60" ........................................................................................... 126-6211UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units .............................................................................126-6954UltraVac S-Series Completing Kits 48" ...........................................................................................126-6466 52" ...........................................................................................126-6467 60" ...........................................................................................126-6468


KEY FEATURES• Patented cutting-deck design yields professional results.• Hydro-Gear ZT3400 hydrostatic drive system delivers a smooth

drive experience and years of reliable service.• Full suspension seating system, with three inches of adjustable

vertical suspension.• Every Radius model is equipped with large, 13" x 6.5"

pneumatic tires front caster tires.• Easy-to-use, accurate sight window-type fuel gauge is standard

on all Radius models.• Intergrated rear tow hitch standard on all Radius models. • Easy to Service—A tools-free removable foot rest eases access




WidthDefl. Down


RAX651GKA484A3 FX651V Kawasaki® 48" UltraCut™ Series 4 937 lbs 81.7" 70.4" 59.5" 52.6" $

RAX691GKA524A3 FX691V Kawasaki 52" UltraCut Series 4 957 lbs 81.7" 70.4" 64.6" 57.3" $

RAX730GKA604A3 FX730V Kawasaki 60" UltraCut Series 4 1006 lbs 82.2" 70.4" 72.7" 61.7" $

RID

ERS

RID

ERS

8382

POWER COMPONENTSEngines – FX651V, FX691V and FX730V Kawasaki® engines; governed to 3,700 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and spin-on filter. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. PTO Engagement – MagStop electromagnetic 125-ft-lb clutch.Fuel Capacity – 7-gallon (26.5-L) single fuel tank with single fill location.Drive-Wheel Release – Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating 5.5"-deep UltraCut Series 4. All models have side-discharge standard with molded discharge chute and option to bag or mulch. Widths Available – 48" (122 cm) 52" (132 cm) and 60" (152 cm).Deck Construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. 7-gauge spindle mounting. Adjustable, anti-scalp rollers.

Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.Steering and Motion Control – HHydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions.Casters – 0.375"-thick caster yoke arms.Front Caster Tires – 13 x 6.5-6, smooth tread, pneumatic.Drive Tires – 24 x 9.5-12 on 48" & 52" models. 24 x 10.5-12 on 60" model.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.Tow Hitch – Standard.Jack Receiver – Standard.

RADIUS® X-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"( )

Notched Air Foil 103-6401 103-6402 103-6403Solid Air Foil 103-6381 103-6382 103-6383

Low Lift 103-6386 103-6387 103-6388Mulching* 103-6391 103-6392 103-6393

eXtreme 2 Mulching 116-5177 116-5175 116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52" 60"



PNEUMATIC TIRE ASSEMBLYRim Only n/a n/a n/aTire Only 126-5959 126-5959 126-5959Complete 126-7752 126-7752 126-7752

MISC All Units


RID

ERS

RID

ERS

8584

2016 PIONEER® E-SERIES

ACCESSORIES & ATTACHMENTS2-Bagger Collection System ........................................................116-5000Equipment Cover - Large ..............................................................116-1379Full-Suspension Seat.....................................................................126-2802Hitch Kit .........................................................................................109-6245Jack ................................................................................................127-6666Jack Mount Receiver ......................................................................116-1571Light Kit ..........................................................................................116-1154Mulching Kits 48" unit ...................................................................................109-5980 52" unit ....................................................................................109-598248" High Lift Bagger Blade ..........................................................109-639152" High Lift Bagger Blade ..........................................................109-6392Sun Shade ...................................................................................... 116-0513Trash Container ....................................................................................TC26


KEY FEATURES• Patented cutting-deck design yields professional results.• Hydro-Gear ZT2800 hydrostatic drive system delivers a smooth

drive experience and years of reliable service.• Foot-operated Quick Height Adjust System allows fast and easy

height adjustments.• Seat position optimized for comfort and improved center of

gravity.• Anti-scalp rollers allow the deck to contour the ground to

prevent scalping.• Spring-supported seat for operator comfort.• See page 165 for Exmark® warranty details


WidthDefl. Down


PNE651GKA48200 FR651V Kawasaki® 48" UltraCut™ Series 2 800 lbs 78.0" 71.0" 60.0" 48.2" $

PNE691GKA52200 FR691V Kawasaki 52" UltraCut Series 2 810 lbs 78.0" 71.0" 64.0" 52.8" $

RID

ERS

RID

ERS

8786

POWER COMPONENTSEngines – FR651V and FR691V Kawasaki® engines; governed to 3,600 rpm.Air Filter – Standard engine manufacturer’s air filter.Drive System – Dual Hydro-Gear® ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.PTO Engagement – MagStop electromagnetic 125-ft-lb clutch.Fuel Capacity – 7-gallon (26.5-L) single fuel tank with single fill location.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating, UltraCut™ Series 2. Side-discharge standard with molded discharge chute and the option to bag or mulch.Widths Available – 48" (122 cm) and 52" (132 cm).Deck Construction – 10-gauge top that is formed and continuously seam welded and 10-gauge side skirt. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers.

Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.50"-diameter cutter housing contains 17mm-(.67") diameter spindle shaft and hex blade drive.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTSteering and Motion Control – Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.Casters – 0.38"-thick caster yoke arms.Front Caster Tires – 13 x 5.0-6, smooth tread, pneumatic.Drive Tires – 20 x 8.0-10 Super Turf® drive tires.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator’s position.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.

2016 PIONEER® E-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3)

Notched Air Foil 103-6401 103-6402Solid Air Foil 103-6381 103-6382

Low Lift 103-6386 103-6387Mulching* 109-6389 109-6390

eXtreme 2 Mulching 116-5177 116-5175*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52"

Pump Drive 115-9613 115-9613Blade Drive 116-3455 103-9273

DRIVE WHEELSRim Only 116-7332 116-7332Tire Only 116-7333 116-7333Complete 116-7331 116-7331

PNEUMATIC TIRE ASSEMBLYRim Only 119-3472 119-3472Tire Only 120-2252 120-2252Complete 120-2251 120-2251

MISC All Units


RID

ERS

RID

ERS

8988

2016 PIONEER® S-SERIES

KEY FEATURES• Now available with a rear-discharge deck.• Patented cutting-deck design yields professional results.• Seat position optimized for comfort and improved center of

gravity.• Foot-operated Quick Height Adjust System allows fast and easy

height adjustments.• Anti-scalp rollers allow the deck to trace the contour of the terrain,

which helps prevent turf scalping.• Rear-sloping foldable ROPS standard.• Heavy-duty canister air filtration system on Kawasaki that improves

engine life, simplifies maintenance and boosts overall productivity.• 4-ply 13 x 5 front caster wheels for increased durability with heavy-

duty axles and bearings.• Spring-supported seat for operator comfort except for A3/A4

models which have full suspension seat standard.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTSDeck Lift Assist - Fits 60" ..............................................................116-6716Equipment Cover - Large ..............................................................116-1379Full Suspension Seat .....................................................................126-2802Hitch Kit 109-6245Jack 127-6666Jack Mount Receiver ......................................................................116-1571Light Kit 116-1154Sun Shade ...................................................................................... 116-0513Trash Container, 2.5-gallon capacity ..................................................TC26

SIDE-DISCHARGE ONLYMulching Kits 48" Unit ....................................................................................MK483Q 52" Unit ....................................................................................MK523Q 60" Unit .......................................................................................MK606UltraVac E-Series (2-Bagger Powered Collection System) Fits all units ............................................................................. 116-3001UltraVac Completing Kits 48" unit ...................................................................................116-4887 52" unit ....................................................................................116-4889 60" unit ................................................................................... 116-64983-Bushel Bagger - Fits 52" & 60" units .........................................GC3602Anti-Scalp Roller Kit - Fits 60" unit ...............................................116-4614Turf Striping Kit ............................................................................. 116-5297

REAR-DISCHARGE ONLYFinish Cut Baffles .......................................................................... 116-8547Side Wear Bar Kit with front anti-scalp roller .............................. 127-6650White non-marking side bumper .................................................126-0854



WidthDefl. Down


PNS710GKC48300 ZT710 Kohler V-Twin 48" UltraCut Series 3 862 lbs 78.0" 71.3" 60.0" 50.7" $

PNS720GKC52300 ZT720 Kohler® V-Twin 52" UltraCut Series 3 868 lbs 78.0" 71.3" 65.0" 54.2" $

PNS730GKA604A3 FX730V Kawasaki 60" UltraCut Series 4 828 lbs 79.0" 71.3" 73.0" 61.4" $

PNS740GKC60400 ZT740 Kohler V-Twin 60" UltraCut Series 4 948 lbs 79.0" 71.3" 73.0" 61.4" $

PNS740GKC604A4 ZT740 Kohler V-Twin 60" UltraCut Series 4 948 lbs 79.0" 71.3" 73.0" 61.4" $

PNS740GKC60RA3 ZT740 Kohler V-Twin 60" UltraCut Rear Discharge 842 lbs 80.8" 72.0" 66.2" n/a $

RID

ERS

RID

ERS

9190

POWER COMPONENTSEngines – FX730V Kawasaki®; ZT710, ZT720 and ZT740 Kohler® V-Twin engines. All engines are governed to 3,750 rpm.Air Filter – Heavy-duty canister air filtration system on Kawasaki.Drive System – Dual Hydro-Gear® ZT3100, hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. 60" model uses dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and spin-on filter.Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse on 48"/52" models. Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 60" model.PTO Engagement – MagStop electromagnetic 175-ft-lb clutch on 48"/52" models. MagStop electromagnetic 200-ft-lb clutch with spot brake on 60" unit.Fuel Capacity – 7-gallon (26.5-L) single fuel tank.Drive-Wheel Release – Standard - allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating 5.0"-deep UltraCut™ Series 3 on 48" & 52" models. Full-floating 5.5"-deep UltraCut Series 4 on 60" model. All models have side-discharge standard with molded discharge chute and option to bag or mulch. Rear-discharge decks have UltraCut™ Rear Discharge cutting deck with option to mulch.

Widths Available – 48" (122 cm) 52" (132 cm) and 60" (152 cm). Deck Construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. 60" model also has 7-gauge spindle mounting. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model.Cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system. Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 2" square tublar steel.Steering and Motion Control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3-height positions.Casters – .38" thick caster yoke arms. .50" thick caster yoke arms on A3 modelsFront Caster Tires – 13 x 5.0-6, smooth tread, pneumatic. 13 x 6.5-6, smooth tread, pneumatic on A3 models.Drive Tires – 22 x 9.5-12 Super Turf on 48" & 52" models. 23 x 10.5-12 Super Turf tires on 60" model.Turning Radius – True zero-turn.Parking Brake – Lever-actuated pawl brake.Seat – Commercial-grade high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator’s position. A3/A4 models have a deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment is fore and aft from operator’s position.Electrical – 12-volt battery with 15-amp alternator.Engine Hour Meter – Standard.Cup Holder – Standard.

2016 PIONEER® S-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3) 60" Rear(3)

Notched Air Foil 103-6401 103-6402 103-6403 CW (2)103-6403

Solid Air Foil 103-6381 103-6382 103-6383 n/a

Low Lift 103-6386 103-6387 103-6388CCW

116-8196CW

103-6388Mulching* 103-6391 103-6392 103-6393 n/a


116-8181CW

116-5174*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52" 60" 60" RearPump Drive 115-9613 115-9613 115-9613 115-9613Blade Drive 116-3455 103-9273 114-8154 125-9371

Right Blade Drive n/a n/a n/a 116-8187


PNEUMATIC TIRE ASSEMBLYRim Only n/a n/a n/a n/aTire Only 1-633002 1-633002 1-633002 1-633002Complete 103-5189 103-5189 103-5189 103-5189

MISC All Units



RID

ERS

RID

ERS

9392

LAZER Z® E-SERIES

KEY FEATURES • Available with side- or rear-discharge decks.• Compact, heavy-duty unibody frame with standard rear-sloping,

easily foldable ROPS• High-back, two tone, bolstered seat with Elastomeric Vibration

Control (EVC) material. A1 & A2 models have two-tone bolstered suspension seat with EVC.

• Exmark® exclusive Parker unitized 12cc pump and wheel motor system with no hoses.

• Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability.

• Heavy-duty canister air filtration system improves engine life, simplifies maintenance and boosts overall productivity.

• No routine grease points. Only 4 annual grease points.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS12 Volt Adapter ..................................................................................109-9694Equipment Cover - Large (excludes 72") ...........................................116-1379Extended Drive Lever (excludes B1/B2 models) .............................. 116-1065Floor Pan Mat (excludes B1/B2 models) ...........................................116-6068Harness Add-On Accessory Kit .........................................................109-9798Hitch Kit ..............................................................................................109-9487Hydro Maintenance Kit ......................................................................126-8103Jack .....................................................................................................127-6666Jack Mount Receiver ..........................................................................127-6665Light Kit................................................................................................116-1154Power Deck Lift (excludes B1/B2 models)......................................... 116-2517Sun Shade ........................................................................................... 116-0513Trash Container, 2.5-gallon capacity .......................................................TC26 Air Ride Suspension Seat (excludes B1/B2 models) .........................116-8820Full-Suspension Seat .......................................................................... 116-8912Tilt Frame & 3D Isolation System Kit (excludes B1/B2 models) ...... 116-0941Custom Ride Seat Suspension ..........................................................116-0062

SIDE-DISCHARGE ONLY3-Bushel Bagger (Does not fit 72") .................................................... GC3602Operator Controlled Discharge (excludes B1/B2 models) ..............116-8431Rear Anti-Scalp Kit - Fits 60" ............................................................. 116-4614Mulching Kits 48" unit ..............................MK486 52" unit ..............................MK526 60" unit ..............................MK606 72" unit ..............................MK726Turf Striper Vertical Adjust (48"/52"/60")..........................................116-6655 72" ................................................................................................116-6656UltraVac® Collection Systems Double-Bag - 48" & 52" units ....................................................... LZUV2B UltraVac, Quick-Disposal, 7-Bushel - 48" & 52" units ..............LZUVQD7 Triple-Bag - 60" & 72" units ..........................................................LZUV3B UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units ..........LZUVQD11UltraVac Kits 48" unit ..........................116-2084 52" unit ..........................116-2085 60" unit ..........................116-2086 72" unit ..........................116-2087

REAR-DISCHARGE ONLYFinish Cut Baffles 60" unit .....................................116-8547 72" unit ............................. 116-8548Side Wear Bar Kit with front anti-scalp roller ........................................... 127-6650White non-marking side bumper ..............................................................126-0854



WidthDefl. Down


LZE651GKA484A2 FX651V Kawasaki® 48" UltraCut™ Series 4 1118 lbs 79.2" 70.0" 59.6" 51.8" $

LZE751GKA524A2 FX751V Kawasaki 52" UltraCut Series 4 1120 lbs 79.2" 70.0" 64.8" 56.3" $

LZE740EKC60400 ECV740 Kohler EFI 60" UltraCut Series 4 1115 lbs 83.1" 70.0" 72.8" 62.5" $


LZE751GKA60RA1 FX751V Kawasaki 60" UltraCut Rear Discharge 1281 lbs 87.2" 70.0" 66.2" n/a $


LZE751GKA72RA1 FX751V Kawasaki 72" UltraCut Rear Discharge 1326 lbs 87.2" 70.0" 78.2" n/a $

RID

ERS

RID

ERS

9594

POWER COMPONENTSEngines – FX651V & FX751V Kawasaki® V-Twin, and ECV740 Kohler® EFI engines. All engines are governed to 3,750 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5 cubic inch motors. 60" & 72" units also has integrated cooling fans and shock valves.Hydro Fluid – Exmark Premium Hydro Oil.Speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 48" and 52" units. Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 60" and 72" units.PTO Engagement – MagStop Electromagnetic 175 ft-lbs clutch with spot brake on 48" and 52" models. MagStop electromagnetic 200-ft-lbs clutch with spot brake on 60" and 72" models.Fuel Capacity – 8-gallon (30.3-L), single fuel tank with single fill location.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch. Rear-discharge decks have UltraCut™ Rear Discharge cutting deck with option to mulch.

Widths Available – 48" (122 cm), 52" (132 cm), 60" (152 cm) and 72" (183 cm).Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength. 4-point suspension, full-floating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72". Rear-discharge decks 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck.Cutting Height – 1.0" (2.5 cm) to 5.5" (11.4 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm (.98") -diameter spindle shaft and splined blade driver.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Casters – .50" thick caster yoke arm.Front Caster Tires – 13 x 5.0-6, smooth-tread, semi-pneumatic. A1, B1 models have 13 x 6.5.0-6, smooth-tread, semi-pneumatic.Drive Tires – 23 x 9.5-12, 4-ply Super Turf drive tires on 48" and 52" models. 24 x 12-12, 4-ply Super Turf drive tires on 60" and 72" model.Turning Radius – True zero-turn.Parking Brake – Lever-actuated disc brake.Seat – Two-toned, bolstered seat with Elastomeric Vibration Controlled material. Adjustment: fore and aft from operator's position. A1 & A2 have deluxe, bolstered suspension seat with Elastomeric Vibration Control material.Diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). Electrical – 12-volt battery with 15-amp alternator. 20-amp on Kohler EFI models.Engine Hour Meter – Standard.Cup Holder – Standard.

LAZER Z® E-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3) 72"(3) 60" Rear(3) 72" Rear(3)

Notched Air Foil 103-6401 103-6402 103-6403 103-6404 CW(2)103-6403

CW(2)103-6404

Solid Air Foil 103-6381 103-6382 103-6383 103-6384 n/a n/a

Low Lift 103-6386 103-6387 103-6388 103-6389CCW

116-8196CW

103-6388

CCW 116-8502

CW103-6389

Mulching* 103-6391 103-6392 103-6393 103-6394 n/a n/a

eXtreme 2 Mulching 116-5177 116-5175 116-5174 116-5171

CCW (1) 116-8181

CW116-5174

CCW (1) 116-8503

CW116-5171


BELTS 48" 52" 60" 72" 60" Rear 72" RearPump Drive 116-1953 116-1953 109-3388 109-3388 109-3388 109-3388Blade Drive 109-8070 109-4994 109-8073 109-9023 125-9371 109-8070

Right Blade Drive n/a n/a n/a n/a 116-8187 116-8501

DRIVE WHEELSRim Only 116-8290 116-8290 116-8295 109-3156 116-8295 126-4181Tire Only 116-8291 116-8291 116-8296 1-633993 116-8296 116-8296Complete 116-8289 116-8289 116-8294 109-8972 116-8294 126-4182

SEMI-PNEUMATIC TIRE ASSEMBLYComplete 109-9126 109-9126 109-9126 109-9127 109-9127 109-9127

MISC All Units

Hydraulic Filter 116-0164

PNEUMATIC TIRE ASSEMBLY A1 Models 109-9127


RID

ERS

RID

ERS

9796

LAZER Z® S-SERIES

KEY FEATURES• Available with side-discharge decks. • High-capacity, 12-gallon, single fuel tank with single fill

location to reduce your time at the gas pump. • High-back, two-tone, bolstered seat with Elastomeric Vibration

Control (EVC) material. A1 and A2 models have deluxe, bolstered suspension seat with EVC. Both seats are mounted on Seat Isolation System.

• Exmark® exclusive Parker unitized 12cc pump and wheel motor system with no hoses.


• Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity.


ACCESSORIES & ATTACHMENTS3-Bushel Bagger (Does not fit 72") .................................................... GC360212 Volt Adapter ..................................................................................109-9694Extended Driver Lever ....................................................................... 116-1065Equipment Cover - Large (Does not fit 72") ......................................116-1379Floor Pan Mat .....................................................................................116-6068Harness Add-On Accessory Kit .........................................................109-9798 Hitch Kit ..............................................................................................109-9487Hydro Maintenance Kit ......................................................................126-8103Jack .....................................................................................................127-6666Jack Mount Receiver ..........................................................................127-6665Light Kit................................................................................................116-1154Mulching Kits 48" unit .............................................................................................MK486 52" unit .............................................................................................MK526 60" unit ............................................................................................ MK606 72" unit .............................................................................................MK726Operator Controlled Discharge ........................................................116-8431Power Deck Lift .................................................................................. 116-2517Rear Anti-Scalp Kit - Fits 60" ............................................................. 116-4614Sun Shade ........................................................................................... 116-0513Trash Container, 2.5-gallon capacity .......................................................TC26 Turf Striper Vertical Adjust 48", 52" & 60" units.....................................................................116-6655 72" unit .........................................................................................116-6656UltraVac® Collection Systems (does not fit propane except 60") Double-Bag - 48" & 52" units ....................................................... LZUV2B UltraVac, Quick-Disposal, 7-Bushel - 48" & 52" units ..............LZUVQD7 Triple-Bag - 60", 60" Propane & 72" units ...................................LZUV3B UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units ..........LZUVQD11UltraVac Kits 48" unit .........................................................................................116-2084 52" unit .........................................................................................116-2085 60" unit .........................................................................................116-2086 60" Propane unit..........................................................................126-4744 72" unit .........................................................................................116-2087Air Ride Suspension Seat ...................................................................116-8820Custom Ride Seat Suspension ..........................................................116-0062Full-Suspension Seat .......................................................................... 116-8912



WidthDefl. Down


LZS651CKA484A2 FX651V Kawasaki® 48" UltraCut™ Series 4 1152 lbs 79.2" 70.0" 59.6" 51.8" $

LZS740AKC524A2 ECV740 Kohler EFI 52" UltraCut Series 4 1159 lbs 79.2" 70.0" 64.8" 56.3" $

LZS740PKC52400 PCV740 Kohler EFI Propane 52" UltraCut Series 4 1307 lbs 79.2" 70.0" 64.8" 56.3" $

LZS801GKA524A2 FX801V Kawasaki 52" UltraCut Series 4 1134 lbs 79.2" 70.0" 64.8" 56.3" $





LZS749AKC72400 ECV749 Kohler EFI 72" UltraCut Series 4 1224 lbs 86.1" 70.0" 84.9" 73.5" $



RID

ERS

RID

ERS

9998

1 standard 2 optional 3 LZS740KC604 uses 109-9127

POWER COMPONENTSEngines – FX651V & FX801V Kawasaki®; ECV740 & ECV749 Kohler EFI engines; PCV740 Kohler Command EFI Propane. All engines are governed to 3,750 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.12cc pumps and 14. 5 cubic inch motors 48" & 52" units.12cc pumps and 14. 5 cubic inch motors with integrated shock valve 60" & 72" units.Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.PTO Engagement – MagStop electromagnetic 200-ft-lbs clutch with spot brake.Fuel Capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location. Propane model has 43.5 lb (10.3 gallon) propane tank.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch. Widths Available – 48" (122 cm) 52" (132 cm) 60" (152 cm) and 72" (183 cm).

Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72". Cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade Spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Casters – .50" thick caster yoke arm.Front Caster Tires – 13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52". 13 x 6.5-6; smooth-tread, semi-pneumatic on 60" and 72" units.Drive Tires – 23 x 9.5-12, Turf Master® (48" & 52"). 24 x 12.0-12, Turf Master (60" & 72").Turning Radius – True zero-turn.Parking Brake – Lever-actuated disc brake. Propane units have Lever-actuated disc and caliper.Seat – Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. A1 and A2 models have deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.Diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). Electrical – 12-volt battery with 15-amp alternator. EFI has 20-amp.Engine Hour Meter – Standard.Cup Holder – Standard.

LAZER Z® S-SERIES QUICK REFERENCEBLADES (QTY) 48"(3) 52"(3) 60"(3) 72"(3)

Notched Air Foil 103-6401 103-6402 103-6403 103-6404

Solid Air Foil 103-6381 103-6382 103-6383 103-6384Low Lift 103-6386 103-6387 103-6388 103-6389

Mulching* 103-6391 103-6392 103-6393 103-6394

eXtreme 2 Mulching 116-5177 116-5175 116-5174 116-5171*Requires installation of Micro-Mulch accessory for proper mulchingMaterial is 0.20” thick alloy steel

BELTS 48" 52" 60" 72"Hydraulic Drive 109-3388 109-3388 109-3388 109-3388

Blade Drive 109-8070 109-4994 109-8073 109-9023Right Blade Drive n/a n/a n/a n/a


SEMI-PNEUMATIC TIRE ASSEMBLYComplete 109-9126 109-9126 109-9127 109-9127

MISC All Units


RID

ERS

RID

ERS

101100

LAZER Z® X-SERIES

ACCESSORIES & ATTACHMENTSAir Ride Suspension Seat ...................................................................116-8820Extended Drive Lever Kit (excludes B1 models) .............................. 116-1065Equipment Cover - Large (Does not fit 72") ......................................116-1379Floor Pan Mat .....................................................................................116-6068Harness Add-On Accessory Kit .........................................................109-9798 Hitch Kit .............................................................................................109-9487Hydro Maintenance Kit ......................................................................126-8103Jack .....................................................................................................127-6666Jack Mount Receiver ..........................................................................127-6665Light Kit ..............................................................................................116-1154 Power Deck Lift (excludes B1 models) ...............................................116-2517RED Max Lock Out Kit ....................................................................... 126-3671 Sun Shade ........................................................................................... 116-0513Trash Container, 2.5-gallon capacity .......................................................TC26SIDE-DISCHARGE ONLY3-Bushel Bagger (Does not fit 72") .................................................... GC3602Mulching Kits 52" unit ............................ MK526 60" unit ......................... MK606 72" unit ............................ MK726Operator Controlled Discharge (excludes B1 models) ....................116-8431Rear Anti-Scalp Kit - Fits 60" ............................................................. 116-4614Turf Striping Kit 52" & 60" units ........................................................................... 116-6655 72" unit .........................................................................................116-6656UltraVac® Collection Systems Double-Bag - 52" unit ................................................................... LZUV2B UltraVac, Quick-Disposal, 7-Bushel - 52" unit ...........................LZUVQD7 Triple-Bag - 60" & 72" unit ...........................................................LZUV3B UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units ...........LZUVQD11UltraVac Kits 52" unit ..............................109-9625 60" unit ......................109-9627 72" unit ..............................109-9629REAR-DISCHARGE ONLYFinish Cut Baffles 60" unit ...............................116-8547 72" unit ....................... 116-8548Side Wear Bar Kit with front anti-scalp roller ...................................... 127-6650White non-marking side bumper .........................................................126-0854


KEY FEATURES • Available with side- or rear-discharge decks.• Equipped with ergonomically advanced suspension seat system

featuring our exclusive ISO-mount Seat Isolation System. • Exmark® exclusive Parker unitized 12cc (52") or 16cc (60"/72")

pump and wheel motor system with no hoses. • Incorporates RED, an onboard intelligence platform, helps to

optimize machine life, maximize productivity and dramatically increase fuel efficiency. It enables communication and response between key systems on your mower. Featured on T0 models.


• Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity.



WidthDefl. Down


LZX740EKC526T0 ECV740 Kohler® EFI Red Equipped 52" UltraCut™ Series 6 1146 lbs 79.2" 70.5" 64.8" 56.3" $

LZX801GKA60600 FX801V Kawasaki® 60" UltraCut Series 6 1210 lbs 83.1" 70.5" 72.8" 62.5" $

LZX921GKA60600 FX921V Kawasaki 60" UltraCut Series 6 1230 lbs 83.1" 70.5" 72.8" 62.5" $

LZX940EKC60600 ECV940 Kohler EFI 60" UltraCut Series 6 1253 lbs 83.1" 70.5" 72.8" 62.5" $

LZX940EKC606T0 ECV940 Kohler EFI RED Equipped 60" UltraCut Series 6 1255 lbs 83.1" 70.5" 72.8" 62.5" $

LZX940EKC60RT0 ECV940 Kohler EFI Red Equipped 60" UltraCut Rear Discharge 1375 lbs 87.2" 70.5" 66.2" n/a $

LZX921GKA72600 FX921V Kawasaki 72" UltraCut Series 6 1294 lbs 86.1" 70.5" 84.9" 73.5" $

LZX980EKC72600 ECV980 Kohler EFI 72" UltraCut Series 6 1276 lbs 86.1" 70.5" 84.9" 73.5" $

LZX980EKC726T0 ECV980 Kohler EFIRED Equipped 72" UltraCut Series 6 1276 lbs 86.1" 70.5" 84.9" 73.5" $

LZX940EKC72RT0 ECV940 Kohler EFI Red Equipped 72" UltraCut Rear Discharge 1390 lbs 87.2" 70.5" 78.2" n/a $

RID

ERS

RID

ERS

103102

POWER COMPONENTSEngine – ECV740, ECV940, ECV980 Kohler Command EFI; FX801V and FX921V Kawasaki® engines. All engines governed to 3,750 rpm except RED units are 3,650 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.

12cc pumps and 14.5 cubic inch motors on 52" units.16cc pumps and 17.1 cubic inch motors with shock valves on 60" & 72" units. Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 52" units. Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse on 60" & 72" models. PTO Engagement – MagStop Electromagnetic 250-ft-lbs clutch with spot brake except FX801V and ECV740 have 200-ft-lbs.Fuel Capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Quick Deck Lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

DECKSStyle – Full-floating UltraCut™ Series 6 featuring a heavy-duty spindle. Side-discharge standard with the option to bag or mulch. Rear-discharge decks have UltraCut™ Rear Discharge cutting deck with option to mulch.Widths Available – 52" (132 cm) 60" (152 cm) and 72" (183 cm).

Deck Construction –10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full floating deck. 72" unit has 6 adjustable, cone-shaped, anti-scalp rollers. 60" unit has 4 adjustable, cone-shaped, anti-scalp rollers. 52" units have 3 adjustable, cone-shaped, anti-scalp rollers.Rear-discharge decks 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck.Cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm diameter spindle shaft.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.Steering and Motion Control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Casters – .50" thick caster yoke arm.Front Caster Tires – 13 x 5.0-6 smooth tread, semi-pneumatic tires on 52" units. 13 x 6.5-6 smooth tread, semi-pneumatic tires on 60" & 72" units.Drive Tires – 23 x 9.5-12, Turf Master® on 52" units. 24 x 12.0-12, 4-ply Turf Master on 60" & 72" units.Turning Radius – True zero-turn.Parking Brake – Lever-actuated disc brake.Seat – Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. Diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). T0 models are equipped with RED technology.Electrical – All have 12-volt battery. 15-amp alternator on Kawasaki units. 20-amp on Kohler units.Engine Hour Meter – Standard.Cup Holder – Standard.

LAZER Z® X-SERIES QUICK REFERENCEBLADES (QTY) 52"(3) 60"(3) 72"(3) 60" Rear(3) 72" Rear(3)

Notched Air Foil 103-6402 103-6403 103-6404 CW(2)103-6403

CW(2)103-6404

Solid Air Foil 103-6382 103-6383 103-6384 n/a n/a

Low Lift 103-6387 103-6388 103-6389CCW

116-8196CW

103-6388

CCW 116-8502

CW103-6389

Mulching* 103-6392 103-6393 103-6394 n/a n/a


116-8181CW

116-5174

CCW(1) 116-8503

CW116-5171


BELTS 52" 60" 72" 60" Rear 72" RearHydraulic Drive 109-3388 109-3388 109-3388 109-3388 109-3388

Blade Drive 109-4994 109-8073 109-9023 125-9371 109-8070Right Blade Drive n/a n/a n/a 116-8187 116-8501

DRIVE WHEELSRim Only 109-3645 109-2871 109-3156 109-2871 109-3156Tire Only 1-653160 1-633993 1-633993 1-633993 1-633993Complete 115-3590 115-3588 109-8972 115-3588 109-8972

SEMI-PNEUMATIC TIRE ASSEMBLYComplete 109-9126 109-9127 109-9127 109-9127 109-9127

MISC All Units



RID

ERS

RID

ERS

105104

LAZER Z® DS-SERIES

ACCESSORIES & ATTACHMENTSEquipment Cover - Large (Does not fit 72") ............................... 116-1379Hitch Kit ....................................................................................... 103-9565Jack ............................................................................................... 127-6666Jack Mount Receiver ..................................................................... 116-1571Light Kit ........................................................................................ 116-1154Sun Shade ......................................................................................116-0513Trash Container, 2.5-gallon capacity ................................................. TC26

SIDE-DISCHARGE ONLYMulching Kits 60" unit ......................................................................................MK605 72" unit ....................................................................................... MK725Turf Striping Kit 60" unit ..................................................................................... STR605 72" unit ................................................................................... 126-5832UltraVac® Collection Systems Triple-Bag - 60" unit .................................................................UV60 Triple-Bag - 72" unit ............................................................. UV6672 UltraVac, Quick-Disposal, 11-Bushel - 60" unit .................... UVD60 UltraVac, Quick-Disposal, 11-Bushel - 72" unit ................ UVD6672UltraVac Kits 60" unit ................................................................................... 109-1167 72" unit .................................................................................... 109-1169Floor Pan Weight ......................................................................... 109-2203

REAR-DISCHARGE ONLYFinish Cut Baffles 60" unit ................................................................................116-8547 72" unit ............................................................................... 116-8548Side Wear Bar Kit ..................................................................... 127-6650White Non-Marking Side Bumper ........................................... 126-0854


KEY FEATURES• Now available with a rear-discharge deck.• Features a new ergonomically advanced suspension seat.• Engine cooling system increases engine cooling efficiency and

improves airflow through radiator in tough conditions.• Improved engine isolation system, for better vibration reduction.• Automatic PTO shutdown provides engine overheat protection.• Utilizes large-capacity, 21cc Hydro-Gear® variable displacement

pumps with shaft-mounted cooling fans.• High-torque wheel motors provide increased performance.• Heavy-duty tubular steel frame design for maximum durability.• Adjustable dampers allow the operator to customize drive

responsiveness to suit personal preference.• Heavy-duty canister air filtration system improves engine life,

minimizes maintenance and boosts overall productivity.• Standard full-suspension seat with armrests.• The DS-Series models are B20 biodiesel-ready for lower

emissions and reduced environmental impact.• See page 165 for Exmark® warranty details


WidthDefl. Down


LZS902DKU605A1 D902 Kubota® Diesel 60" Series 5 1602 lbs 84.5" 72.7" 72.8" 61.4" $

LZS902DKU725A1 D902 Kubota Diesel 72" Series 5 1702 lbs 88.7" 72.7" 85.8" 74.3" $

LZS902DKU60R00 D902 Kubota Diesel 60" UltraCut™ Rear Discharge 1552 lbs 85.6" 72.7" 66.2" n/a $

LZS902DKU72R00 D902 Kubota Diesel 72" UltraCut Rear Discharge 1629 lbs 89.8" 72.7" 78.2" n/a $

107106

POWER COMPONENTSEngine – D902 Kubota® 3-cylinder liquid-cooled diesel, governed to 3,850 rpm.Air Filter – Heavy-duty canister air filtration system.Drive System – Two Hydro-Gear® 21cc/rev pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm) diameter tapered shafts.Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0-12.0 mph (19.3 kmph) forward, 0-8.0 mph (12.9 kmph) reverse. PTO Engagement – MagStop electromagnetic 250-ft-lb clutch with spot brake. Fuel Capacity – 15.5-gallons (58.7-L) twin fuel tanks.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlockRollover Protection System (ROPS) – 2-post foldable ROPS standard with seat belt and latch.Deck Lift - Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.Casters – 0.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.Cup Holder – Standard.

DECKSStyle – Side-discharge decks have Series 5 cutting deck with option to bag or mulch. Rear-discharge decks have UltraCut™ Rear Discharge cutting deck with option to mulch.Widths Available – 60" (152 cm) and 72" (183 cm).

Deck Construction – Side-discharge decks have 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6.0"-deep deck, 4-point suspension, full-floating deck with 6 adjustable, cone-shaped, anti-scalp rollers. Rear-discharge decks have 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck.Cutting Height – Side-discharge: 1.0" (2.5 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator’s seat. Rear-discharge: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.Blade Spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Welded, heavy-duty tubular steel.Steering and Motion Control – Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Also adjustable to 2-height positions.Front Caster Tires – 13 x 6.50-6, smooth-tread, semi-pneumatic tires on side-discharge decks. 15 x 6.00-6, smooth-tread, semi-pneumatic tires on rear-discharge decks.Drive Tires – 26 x 12.0-12, 4-ply Multi-Trac.®Turning Radius – True zero-turn.Parking Brake – Lever-actuated drum and band integrated with transmission-neutral interlock.Seat – Deluxe, two-tone bolstered, full-suspension seat with Elastomeric Vibration Control material. Adjusts to individual operator weight and features padded, height-adjustable armrests. Hinged mounting. Electrical – 12-volt battery with 60-amp alternator.Engine Hour Meter – Standard. Fuel Gauge – Standard.Console Storage Compartment – Standard.

LAZER Z® DS-SERIES QUICK REFERENCEBLADES (QTY) 60"(3) 72"(3) 60" Rear (3) 72" Rear (3)

Notched Air Foil 109-6463 109-6465 CW (2)103-6403

CW(2)103-6404

Solid Air Foil 109-6469 109-6471 n/a n/a

Low Lift 103-8240 103-9622CCW

116-8196CW

103-6388

CCW 116-8502

CW103-6389

Mulching* 109-5396 109-5879 n/a n/a

eXtreme 2 Mulching 116-5499 116-5501CCW (1) 116-8181

CW116-5174

CCW(1) 116-8503

CW116-5171


BELTS 60" (Side) 72" (Side) 60" (Rear) 72" (Rear)

Mule Drive 109-4199 109-4199 116-9202 116-9702Blade Drive 1-633127 1-643052 116-8187 116-8501Pump Drive 109-7582 109-7582 109-7582 109-7582


MISC All Units


SEMI-PNEUMATIC TIRE ASSEMBLYComplete 109-9127 109-9127 116-8644 116-8644


RID

ERS

RID

ERS

109108

NAVIGATOR®

KEY FEATURES • Navigator now comes with a cutting deck installed.• Enhanced controls for improved steering response.• Full-floating, 4 5/8"-deep deck that traces the precise contours of

the turf for a flawless cut.• Rear-discharge deck design with two-sided trimming enables the

operator to effectively control discharge around landscape areas.• Integrated collection system combines precision cutting

performance with advanced dedicated bagger technology.• Large-capacity, 9.5-bushel (76 gallons) hopper is standard.• Larger-diameter (5" x 11") blower generates enhanced airflow for

optimum vacuuming performance and debris collection.• Fill Reduction provides the versatility to: – 100% bag – Closed 50% mulch / 50% bag – 100% mulch (requires optional mulch kit)• Comfortable, ergonomic positioning of the controls minimizes

fatigue.• Commercial-grade, high-back contoured foam padded seat for

improved operator comfort• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTS2-Post Foldable ROPS ..................................................................126-0369CustomRide Seat Suspension Kit ................................................130-8471Dual Semi-Pneumatic Rear Casters .............................................103-9005Harness Add-On Accessory ......................................................... 109-9798Light Kit .........................................................................................130-8469Mulching Kit 42" deck ................................................................................. MKNAV42 48" deck ................................................................................. MKNAV48Narrow Drive Tire Kit (pair) 18 x 8.5-10 (s/n 313,000,000 & higher) ... 116-9590Automatic Door Opener Kit .........................................................130-8470Removable Dump Tub Kit ............................................................130-8457Powered Dump .............................................................................130-8458Tire and Wheel 18 x 10-5.10......................................................... 116-5634Fill Reduction Kit for models below s/n 670,000 ........................109-5458


ModelNumber Engine Size Deck Weight

LengthDeck Down

LengthDeck Up Height Width Price

NVS740CKC42000 CH740 Kohler® 42" Center Discharge 1140 lbs 91.8" 81.8" 51.2" 43.2" $

NVS730AKC48000 ECH730 Kohler EFI 48" Center Discharge 1170 lbs 94.5" 82.4" 51.2" 49.2" $

NVS740CKC48000 CH740 Kohler 48" Center Discharge 1170 lbs 94.5" 82.4" 51.2" 49.2" $

RID

ERS

RID

ERS

111110

POWER COMPONENTSEngines – CH640 & CH740 Kohler® Command™; ECH730 Kohler Command EFI engines. All engines are governed to 3,600 rpm.Air Filter – Heavy-duty canister air filtration.Drive System – Dual Hydro-Gear® 12 cc variable displacement pumps power Hydro-Gear H Series motors.Hydro Fluid – Exmark Premium Hydro oil.Speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse.PTO Engagement – Lever-actuated clutching belt with 6" brake band.Fuel Capacity – 7.5-gallon (28.4-L), pivoting tank for easier engine service.Drive-Wheel Release – Allows unit movement without engine running.Safety Package – Operator Presence Controls (OPC) and drive system interlock.Rollover Protection System (ROPS) – Optional.Casters – 0.38" thick front caster fork.

DECKSStyle – Full-floating, center-discharge cutting deck with heavy-duty gear-driven spindle assembly. Patented Fill Reduction baffles standard.Widths Available – 42" (107 cm) and 48" (122 cm).Deck Construction – 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.Cutting Height – 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments.Blade Spindles – Heavy Duty cast iron right-angle gearboxes.

Blade Drive – 1" Austempered spindle shaft with shear-pin protection at the blades.Blade-Tip Speed – Approximately 18,500 fpm.

EQUIPMENTTractor Frame – Channeled and fully welded 1.5” x 1.5” x 0.187” wall tubing with a ground clearance of 4.0,” strategically located, continuous force counterweight springs.Steering and Motion Control – "FeatherTouch" hand-control drive levers, low-force constant speed lever.Front Caster Tires – 8 x 3.0-4 semi-pneumatic.Rear Caster Tires – 13 x 8.0-6 semi-pneumatic.Drive Tires – 18 x 10.5-10 Multi-Trac® C/S.Turning Radius – True zero-turn.Parking Brake – Wet disc, internal in wheel motor.Seat – Commercial-grade, high-back contoured foam padded seat.Diagnostics – Operational diagnostics in hour meter.Electrical – 12-volt battery with 15-amp alternator. EFI unit has 20-amp alternator.Engine Hour Meter – Standard.Gearbox Design – Heavy-duty cast iron. Three independently sealed high-capacity gearboxes with spiral bevel-cut gears for quiet operation.Blower – 5.0" x 11" x 1/4" housing with reinforced high-wear areas and a three-blade abrasion-resistant impeller.Grass Catcher Capacity – Rear tapered 9.5-bushel (76-gallon) capacity.Diffuser – Fixed mechanical with Exmark® exclusive debris manager.Fill Indicator – Audible alarm.Ground Clearance – 4" from base of tractor frame.

NAVIGATOR® QUICK REFERENCEBLADES (QTY) 42" LH (1) 42" RH (1) 48" LH (1) 48" RH (1)

Standard 103-4209 103-4210 103-4207 103-4208Mulching* 103-9526 103-9527 103-9524 103-9525

42" has 3.5" air foil. 48" has 5.5" air foil. Material is 0.164" thick. *Requires installation of Micro-Mulch accessory for proper mulching.

BELTS 42" 48"PTO/Blower Drive1 103-6737 103-6737Hydro Pump Drive 103-4244 103-4244

DRIVE WHEELS 42" 48" Rim Only

18 x 8.5-10 / 18 x 10.5-10 116-5631 116-5631Tire Only - Optional

18 x 8.5-10 103-4320 103-4320Tire Only - Standard

18 x 10.5-10 105-1945 105-1945Complete - Optional

18 x 8.5-10 116-5633 116-5633Complete - Standard

18 x 10.5-10 116-5634 116-5634

FRONT CASTER WHEELS

Complete 103-9495 103-9495

REAR CASTER WHEELS13 x 8.0-62 103-9494 103-949413 x 5-63 103-3785 103-3785

MISCBlade Driver 103-7705 103-7705Blade Bolt 92-5816 92-5816Shear Pin 99-0283 99-0283

All UnitsAbove 32° F

All Units Below 32° F

Hydro Oil Filter 109-4180 1-5235411matched set 2semi-pneumatic tire assembly w/axle 3semi-pneumatic tire assembly dual tires

RID

ERS

RID

ERS

113112

AERATOR® S-SERIES

KEY FEATURES • Easy to use controls - Intuitive operation.• Optional removable suitcase weights. Two 30 lb. weights are

standard and one additional 30 lb. weight is optional.• Low effort maneuverability as compared to competitive offerings.• Split tine shaft with independent idlers for easier turning with

tines engaged.• Self-cleaning tines.• Single bail traction control.• Easy to replace tines.• Lever control tine engagement.• 1-year limited warranty. See page 165 for Exmark® warranty details

SPECIFICATIONS Engine – FJ180V Kawasaki KAI with recoil start governed to 3,600 rpm.Fuel Capacity – 1 gallon (3.8-L).Working Width – 21"Rear Tires – 10 x 2.75-5.5 solid.Front Tires – 11 x 4-4.Transmission – Hydro-Gear® T2.Drive – #40 chain.# of Tines – 36 coring tines.Core depth – 2" to 3".Aerating Speed – 0–4.0 mph (6.4 kmph) forward Plugs/square foot – 4.6

ModelNumber Engine Size Price

ARS180CKA21000 FJ180V Kawasaki® KAI 21" $

Weight Length Height Width

350 lbs 61" 52" 30"includes two 30 lb wt

PROPANE:

Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs.

Propane is considered a GREEN Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced CARBON FOOTPRINT as compared to gasoline. PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range.

No known restrictions regarding hours of operation on "Ozone Action Days."

Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation.

Propane fuel stability - No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage.

The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative.

BIO-DIESEL: Diesel models are biodiesel ready, up to B20, for lower emissions and reduced environment impact.

B20 represents a mix of 20 percent biodiesel and 80 percent diesel.

Cleaner-burning alternative fuel made from renewable resources.

Compared to petroleum-based fuels, biodiesel emits less carbon dioxide, a major contributor to greenhouse gas emissions. Also emits less unburned hydrocarbons and particulate matter which are considered harmful emissions.

Superior fuel lubricity resulting in less wear and equipment downtime.

ELECTRONIC FUEL INJECTION: Reduces fuel consumption, fewer emissions and carbon footprint.

Delivers up to 25% in fuel savings.

Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.

Easy start in any altitude or climate condition (no manual choke).

Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.

Sequential Fuel Injection delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

BENEFITS OF OUR ECO-FRIENDLY MOWERS.

MISC ITEMSBelt 121-1999

Tines 126-2143

WHEELS Front Rear

Rim Only 121-6082 n/aTire Only 121-6081 n/aComplete 120-3550 121-4897

ACCESSORIES & ATTACHMENTSWeight ........................................................................................... 121-6080

TURF

ECO

115114

30" STAND-ON AERATOR 20" SLICER SEEDERModelNumber Engine Size Price

ARX541CKA30000 FS541V Kawasaki® 30" $


1015 lbs 69" 53" 48"

KEY FEATURES • Easy to use controls - Intuitive operation.• Weight directly over tines to maximize core depth.• Compact size as compared to competitive offerings.• Split tines for easier turning with tines engaged.• Self-cleaning tines.• Easy to replace tines.• Foot pedal for tine engagement.• Tine down - force hydraulic actuated (also adjustable).• 1-year limited warranty.• See page 165 for Exmark® warranty details

ModelNumber Engine Size Price

SDS270CSB20000 Subaru® EX270 20" $


270 lbs (handle folded) 38" (handle folded) 31" 30" (handle up) 52" (handle up) 45"

KEY FEATURES • Easy to maneuver and operate.• The wide stable base delivers good side hill stability and even

cutting Verticutting reel.• Integrated lift handles and foldable handles improve transport

and storage.• Blades - Increase seed/soil contact, removes thatch, and high-

carbon steel for improved durability.• Seed mixer is regulated by ground speed for even distribution.• 1-year limited warranty.• See page 165 for Exmark® warranty details

SPECIFICATIONS Engine – FS541V Kawasaki electric start engine governed to 3,600 rpm.Fuel Capacity – 5 gallons (18.9-L).Working Width – 30"Rear Tires – 16 x 6.50-8Front Tires – 13 x 5-6 semi-pneumatic.Transmission – Hydro-Gear® ZT3100.Drive – #50 chain.# of Tines – 48 coring tines.Core depth – 2" to 5".Aerating Speed – 0–7.0 mph (11.2 kmph) forwardPlugs/square foot – 4.6

SPECIFICATIONS Engine – Subaru EX270 engine.Fuel Capacity – 1.6 gallons (6.0-L).Clutch – Warner Mag-Stop.Tires – 11 x 4-4Cutting Depth – Adjustable up to 1" deepSeeding / Slicing Width – 20"Hopper Size – 40 lbs.Speed – 0–3.8 mph (6.1 kmph) forward.

MISC ITEMSTransmission Belt 116-8874

Auxiliary Belt 116-8874Tines 126-2143

Hydro Filter 109-3321

WHEELS Front Rear

Rim Only 109-9126 116-6977Tire Only n/a 116-6978Complete n/a 116-6932

MISC ITEMSClutch Belt 116-9518

Transmission Belt 116-9532Seeder Cutting Blade 121-1931

WHEELS Front Rear

Rim Only 121-6082 121-6082Tire Only 121-6081 121-6081Complete 120-3550 120-3550

TURF

TURF

117116

36" ROTARY BROOM

KEY FEATURES • Maneuverable, versatile, and durable multipurpose rotary broom

ideal for operation in all seasons• The Kohler® engine functions as a multi-season engine as the air

intake rotates 180.°• Patented Power Steering - Turn on a dime. Wheels can be

disengaged independently or simultaneously with trigger controls making turning, reversing and steering easy.

• Independent control levers to engage broom and ground drive• Thumb latch for 20° broom angle adjustment on both left and

right side• Easy Leveling - Robust positive pin-type height adjustment

with 1/8" increments for easy leveling and precise ground engagement.

• Dirt Deflector is standard for 2015 models.• 1-year limited warranty.• See page 165 for Exmark® warranty details

SPECIFICATIONS Engine – CV270 Kohler with recoil start engine governed to 3,600 rpm.Transmission – Friction disc.Steering – Power steering with clutch left and right hand.Clutch – Engine belt tensioner.Fuel Capacity – 4.3 quarts (4.0-L).Broom Angle – 40˚ total. 20˚ left and 20˚ right.Broom Width – 36" (18 wafers).Broom Diameter – 25".Broom Speed – 200 RPM.Broom Drive – Direct.Tires – 15 x 5.00-6.Broom Wafers – Poly 10 ID x 25 OD. std. black (snow/hard surface), yellow wafer (grass), convoluted segment

ModelNumber Engine Size Weight Length Height Width Price

BRS270CKC36000 CH270 Kohler® 36" 323 lbs 73" 40" 46"

$

ACCESSORIES & ATTACHMENTSBroom Power Kit ...........................................................................126-0023Broom Deflector ........................................................................... 116-8229Concrete/Snow Bristle Discs (Black) - Set of 18 discs ................ 116-8232Debris Box .....................................................................................116-8230Light Kit ......................................................................................... 116-8234Snow Cab Kit ................................................................................. 116-8227Tire Chain Kit ................................................................................. 116-8226Turf Caster ..................................................................................... 116-8228Turf Bristle Discs (Yellow) Set of 18 discs .................................... 116-8233

MISC ITEMSBroom Head 1-653332

Traction 94-8812

WHEELS Rear

Rim Only 107-3043Tire Only 107-3042

Complete 106-7284 RH106-7285 LH

TURF

TURF

119118

SPREADER SPRAYERModelNumber Engine

SSS270CSB00000 Subaru EX27

KEY FEATURES • Equipped with a Subaru® engine.• Innovative lean-to-steer technology - this advanced solution

allows the operator to control all motion with one hand.• Stainless steel frame.• The agitation system allows for both wetable powder and dry

flow-ables.• No belt hassle with the direct drive to transaxle and electric

spinner motor and pump.• Better wide spray coverage with two nozzle set.• 20-gallon spray tank.• Hopper can hold 175 lbs. An extra 50 lb bag can also be placed

on top of spray tank.• Stainless steel operator platform with isolation mounts for a more

comfortable ride. Locks up or down for storage. • See page 165 for Exmark® warranty details

POWER COMPONENTSEngine – Subaru EX27. Engines governed to 3,600 rpm.Displacement – 265ccTransmission – Hydrostatic.Drive System – Tuff TorqFuel Capacity – 1.59 gallons.Ground Speed – 0–5.5 mph (8.8 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.

SPREADER AND SPRAY SYSTEMSpread Width– Adjustable from 4 ft up to 22 ft.Hopper Capacity – 175 lbs, plus 50 lbs on spray tank.Spinner Motor – 12 VDC, 2 hp motor.Tank Capacity – 20 gallons.Spray Width – Wide spray up to 11 ft wideNarrow spray up to 5 ft wideSpray Rate – Wide – 0.69 gpm at 30 psi, 0.80 gpm at 40 psi Narrow – 0.35 gpm at 30 psi, 0.40 gpm at 40 psiPump – Remco

EQUIPMENTFront Tire– 18 x 7.5-8Rear Tire – 13 x 6.5-6Frame – Stainless Steel

DRIVE WHEELSRim Only 126-7266Tire Only 126-1618Complete 126-7265

STEERING WHEELSRim Only 126-7258Tire Only 126-1509Complete 126-7220

ACCESSORIES & ATTACHMENTSAnti-Siphon Assembly ................................................................ 126-5850Cable Guard Protector ............................................................... 126-5865Hopper Screen - Small Hole ...................................................... 126-3242Hopper Screen - Large Hole .......................................................126-3143Hose Tray - 15 ft. .........................................................................126-6305Hose Tray and 30 ft Extended Hose ......................................... 126-8155Multi-Purpose Bag ......................................................................126-6000Nozzle Spray–Red–TeeJet® Turbo FloodJet® TF-VS2 ............... 126-2566Nozzle Spray–Brown–TeeJet Turbo FloodJet TF-VS2.5 ...........126-7171Nozzle Spray–Gray–TeeJet Turbo FloodJet TF-VS3 .................126-7170Nozzle Spray–White–TeeJet Turbo FloodJet TF-VS4 ...............116-9798Nozzle Spray–Blue–TeeJet Turbo FloodJet TF-VS5 ..................126-7172Spray Wand TeeJet 50800 ......................................................... 126-6325Spray Wand Valley Industries ..................................................... 126-8150Spray Wand TeeJet PW4000A ................................................... 126-8160Spray Wand TeeJet 22670 .......................................................... 126-3944


Weight Length Height Width Price

500 lbs 67.5" 51.5" 35.5" $

TURF

TURF

121120

UTILITY VEHICLEModelNumber Engine Displacement Weight Length Height Width Price

UTS500AAC00000 SOHC, 4-stroke, 4-valve with EFI 2/4 WD 1307 lbs 129.0" 79.0" 60.0" $

UTS700AAC000EP SOHC, 4-stroke, 4-valve with EFI

2/4 WD + Electric Front Differential Lock 1363 lbs 129.0" 79.0" 60.0" $

KEY FEATURES • Both UTV models tout 2- or 4-wheel-drive capability.• Standard front brush guard.• 2" receivers in the front and rear.• Digital gauge features 14 critical operation information indicators.• Equipped with integrated parking brake.• Adjustable shocks maximizes the full 10" of travel and 10" of

ground clearance.• Convert from cargo box to flat bed.• The 2-in-1 cargo box can be converted to flatbed and features

manual dumping.• See page 165 for Exmark® warranty details

ACCESSORIES & ATTACHMENTSLXC Cab ..........................................................................................132-3116LXC Windshield ..............................................................................132-3141LXC Rear Panel .............................................................................. 132-3143LXC Door (Pair) ...............................................................................132-3142LXC Roof/Headliner ...................................................................... 132-3144VXC Cab .........................................................................................132-3117VXC Full Windshield ......................................................................132-3147VXC Glass Windshield .................................................................. 132-3148VXC 2-Piece Roof .......................................................................... 132-3146VXC Door (Pair) ..............................................................................132-3145VXC Vented Windshield ................................................................132-3151VXC Tip-Out Windshield .............................................................. 132-3150VXC Rear Panel ..............................................................................132-3149Low Windshield ..............................................................................132-3152Windshield Wiper ..........................................................................132-3126Windshield Wiper (Manual) .......................................................... 132-3154Windshield Washer Fluid Kit (requires 132-3156) .............................132-3127Rear Storage Box ...........................................132-3160 (LH) 132-3159 (RH)Front Under Hood Storage Box ................................................... 132-3156Cargo Box Lift ............................................................................... 132-3225Box Enclosure ................................................................................ 132-3130Cab Heater .....................................................................................132-31283,000 lb Winch ...............................................................................132-3118Winch Synthetic Rope................................................................... 132-3153Snow Plow (requires 132-3118) ......................................................... 132-3129Rear View Mirror .............................................................................132-3124Side-View Mirrors ...........................................132-3134 (LH) 132-3135 (RH)

Accessories & Attachments continued on next page

UTV

UTV

123122

POWER COMPONENTSEngines – 500S has SOHC 36 hp, 4-stroke, 4-valve with EFI. 700S has SOHC 46 hp, 4-stroke, 4-valve with EFI.Displacement – 500S has 443cc; 700S has 695cc .Transmission – Automatic CVT with EBS, Hi/Lo Range, reverse and park.Drive System – 500S has 2/4 WD; 700S has 2/4 WD + Electric Front Differential Lock.Cooling System – Liquid with fan.Speed – Up to 44 mph (72.4 kmph) on 500S; Up to 55 mph (88.5 kmph) on 700S.Fuel Capacity – 8.2-gallons (31.0-L).Steering – Manual. Power Steering on UTS700AAC000EP.Odometer – Digital.

SUSPENSIONFront Tires – 26 x 9R14.Front Brakes – Hydraulic Disc.Front Suspension – Double A-Arm.Front Travel – 10".Rear Tires – 26 x 11R14.Rear Brakes – Hydraulic Disc.Rear Suspension – Double A-Arm.Rear Travel – 10".

DIMENSIONSWheelbase – 85".Electrical – 28-amps.Dry Weight – 1307 on 500S; 1363 on 700S.Total Payload – 1100 on 500S; 1500 on 700S.Tow Capacity – 1500 lbs.

UTILITY VEHICLE® QUICK REFERENCE

ACCESSORIES & ATTACHMENTS Front Bumper ................................................................................132-3131Rear Bumper .................................................................................132-3132 Nerf Bars....................................................................................... 132-3133Hitch ...............................................................................................132-3121Hitch Ball - 1" ............................................................................... 132-3122Hitch Ball - 2" ............................................................................... 132-31239-LED Light Bar .............................................................................132-3119Baja Light Bar ............................................................................... 132-3120Stereo Kit ...................................................................................... 132-3140 Oil Cooler ......................................................................................132-3157Switch Mount Panel ......................................................................132-3125Worksite Tire ................................................................................ 132-3155Fast Clamp ................................................................................... 132-3158Tiger Trax ...................................................................................... 132-31364-Season Tracks Clutch ................................................................132-3137Snow Plow Tiger Trax Extension ..................................................132-3139Mounting Brackets for Tiger Trax ............................................... 132-3138Exmark Premium Engine Oil UTV Formulation .........................126-5583Exmark Premium Engine Oil SAE 0W-40 ...................................126-5584Exmark Premium UTV Extreme Conditions Gear Lube ............126-5585

UTV

UTV

MISC 500S 700SBulb Headlight 132-1821 132-1821Bulb Taillight 132-1822 132-1822Headlight LH 132-2064 132-2064Headlight RH 132-2065 132-2065

Fuel Cap 132-1999 132-1999Oil Filter n/a 132-2220

Air Box Filter 132-2673 132-2673Dust Filter 132-2010 132-2010Spark Plug 132-1758 132-1759

Oil Lever Stick 132-2153 132-2122

MISC 500S 700SLug Nut 132-198 132-1947

Rear Tire (26 x 11 R14) 132-2607 132-2607Front Tire (26 x 9 R14) 132-2606 132-2606

Drive Belt n/a 132-2313V-Belt 132-2323 n/a

OIL All Units

UTV Engine Oil 126-55830W-40 Engine Oil 126-558480W-90 Gear Lube 126-5585

125124

SUSPENSION SEAT Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch.

Model # Application

126-8292 Fits Radius. Standard on Radius X-Series

ACCESSORIES & OPTIONS

Exmark® has a full range of seat options to help you adjust to a ride that is best for you.

AC

CES

SORI

ES

AC

CES

SORI

ES

AIR RIDE Designed to fit all Lazer Z® models,the new air ride seat gives you thebest comfort available. Sophisticatedair suspension technology virtuallyeliminates any bumps, jarring orvibration your property delivers.

Model # Application

116-8820 Lazer Z's s/n >790,000. No Pioneer.

FULL-SUSPENSION SEAT Designed to fit all Lazer Z® models,the new air ride seat gives you thebest comfort available. Sophisticatedair suspension technology virtuallyeliminates any bumps, jarring orvibration your property delivers.

Model # Application

116-8912 Lazer Z's s/n >790,000. No Pioneer

A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings per individual's weight and personal preference. Model # Application

116-0062 Fits all Lazer Z models with S/N 790,000 & above, except Diesel and LZA models. Fits Lazer Z E-Series with

S/N with 315,000,000 & above.

103-4754 Fits all Lazer Z,® CT, HP, AS with S/N below 790,000.

130-8471 Fits Navigator with S/N 313,000,000 and above.

TILT FRAME & 3-D ISOLATION SYSTEM KITGet full-featured Lazer comfort for your Lazer AS by adding the Tilt Frame & 3-D Isolation System. Designed for ease of maintenance access, the tilt feature maintains a low-profile on four independent isolation mounts to smooth your ride. Standard on LZZ, LZX and LZS s/n 313,000,000 and above.

Model # Application

116-0941 Fits Lazer Z models S/N 790,000 & above, excludes LZDS.

SUSPENSION SEAT KITIncludes Full Suspension Seat and Tilt Frame

Model # Application

126-9869 Radius E-Series and S-SeriesSEAT COVERProtect your new seat or to make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit.

Model # Application

126-9352 Standard - Fits Radius E-Series126-9353 Suspension - Fits Radius S-Series & X-Series Suspension Seat

SUSPENSION SEAT KIT UPGRADEIncludes Tilt Frame and ISO mounts

Model # Application

126-9868 Radius E-Series

127126

COMMERCIAL 21 DOOR HANDLE KIT

Model # Application

109-9326 Fits all Commercial 21's .

COMMERCIAL 21 MULCH PLUGEasily transition from bagging to mulching.

Model # Application

116-0251 Fits all Commercial 21's.

COMMERCIAL 21 9.5" DIAMETER WHEELSFor extended cut height, tough terrain or when lowered rolling resistance is needed, this larger-diameter wheel kit improves your productivity.

Model # Application


COMMERCIAL 21 WHEEL WEIGHT KITEnhance your productivity in wet conditions with this wheel weight kit. Each wheel plate weights 3 pounds to give you excellent performance, even with a full load of grass.

Model # Application


COMMERCIAL 21 DECK WEAR KITProlong the life of your deck in the toughest conditions with this heavy-duty deck wear kit.

Model # Application



STANDONIncrease productivity while reducing work load with this pull-behind sulky. Uses an innovative QuikMount system and convenient, spring-loaded latch. Expanded operator deck with foot guard for safer, more comfortable riding.

Model # Application

116-7223 Fits Turf Tracer and Viking

WALK-BEHIND WEIGHT SETAdd weight to the front end of your Exmark walk-behind. Beneficial for use with Exmark StandOn to enhance stability and control. Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer X-Series models.Model # 103-2637

Model # Application

103-2637 Fits Turf Tracer S-Series and Viking

AC

CES

SORI

ES

AC

CES

SORI

ES

COMMERCIAL 21 ENGINE GUARDProtect your engine from impact when mowing around low-hanging branches and other obstacles.

Model # Application


COMMERCIAL 21 COATED BAIL DRIVE

Model # Application


129128


3-BUSHEL BAGGERLightweight and easy to attach, this three-bushel grass bagger fits Exmark® side-discharge walk-behinds and most riding mowers. Excludes Commercial 21," Metro® 26" Pioneer E-Series, & Phazer.™

Model # Application

GC3602 Fits Walk-Behinds w/ side-discharge, Radius Lazer Z X-, S-, E-Series (not 72") Pioneer S-Series 52" & 60", and Vantage. (VT36 requires adapter 116-7042. Vantage Propane requires 126-7623. Radius 48"/52" requires 126-7496)

116-7042 Required for Vantage 36" fit-up. 36" Turf Tracer S-Series with s/n 315,000,000 & above.

126-7623 Required for Vantage Propane fit-up.

126-7496 Required for Radius 48" and 52" fit-up.

116-4091 Applies only to the GC36MC. This adapter is needed for Vantage, Lazer Z s/n 600,00 and above, Pioneer, Quest SP, & Quest s/n 919,999 & below.

12-VOLT POWER ADAPTERConveniently located for ease of use. Great for phone chargers, or any other operator comfort accessory. Standard on LZX s/n 313,000,000 & above.

Model # Application

109-9694 Fits all Lazer Z models with S/N 790,000 & above except Diesel models.

CUP HOLDERModel # Application

116-9676 Fits all Vantage models.

EQUIPMENT COVERProtect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed out of tough 600-denier polyester, making it abrasion and tear resistant. It's elastic opening

provides a secure, snug fit.

Model # Application

116-1378 Small - Fits Quest (excludes 60") and Phazer units.116-1379 Large - Fits Lazer Z, Quest 60" & all other units excluding 72" decks and Navigator models.

ANTI-SCALP ROLLER KITSProvides maximum protection from scalping in tough terrain.

Model # Application 116-4607 Fits Lazer Z X-Series & Lazer Z S-Series 72" decks s/n 849,999 and below.116-4614 Fits Lazer Z X-Series & Lazer Z S-Series 60" decks. Fits Vantage 60" unit - left rear corner116-4616 Fits Turf Tracer X-Series 52" & 60" decks.116-5305 Fits Vantage 36" unit - right front corner116-4608 Fits Vantage 48" & 52" units - front of deck 116-9730 Fits Rear Discharge units.

AC

CES

SORI

ES

AC

CES

SORI

ES

EXTENDED DRIVE LEVER KITImprove your elbow room while you operate with extended drive levers.

Model # Application

116-1065 Fits Lazer Z models with S/N 790,000 & above. Does not fit Lazer Z D or DS-Series, or Suspension Platform models

131130


JACK & MOUNT RECEIVERSafely and easily access the underside of your zero-turn mower's deck. Once receiver is mounted to frame, jack attaches for smooth lift without hassle or strain, thanks to the comfortable ergonomic design. Built for years of reliability.

Model # Application

127-6666 15" pivot-foot jack.127-6665 Receiver - Fits Lazer Z X- and S-Series models with S/N

790,000 & above. Fits Lazer Z E-Series 315,000,000 & above. Excludes rear-discharge decks.

116-5701 Receiver - Fits Lazer Z E-Series with S/N 920,000 to 314,000,000 and Lazer Z Advantage with S/N 850,000 to 919,999.

116-1571 Receiver - Fits Lazer Z DS-Series and Pioneer S- and E-Series. LZE and LZX Rear Discharge, also Lazer Z with S/N 790,000 & below.

116-4414 Receiver - Fits Vantage 36"116-3300 Receiver - Fits Vantage 48," 52" & 60".116-1563 Receiver - Fits Quest SP and Quest with S/N 790,000 to 919,999.126-5251 Fits Quest models with S/N above 400,010,500

HARNESS ADD-ON ACCESSORY KITTake the hassle out of dual accessory fit up with this add-on harness.

Model # Application

109-9798 Fits Lazer Z E-, S- and X-Series models with S/N 790,000 & above. Fits all Navigator models.

GAS LOCK CAPHelp to prevent fuel theft or tampering with 3.5” diameter locking fuel caps.

Model # Application

126-4107 Fits Lazer Z s/n 790,000 and higher

Lazer Z Diesel, Pioneer, Navigator,

Stand-On Spreader/Sprayer, Stand-On Aerator

AC

CES

SORI

ES

AC

CES

SORI

ES

FLOOR MATSFor the perfectionist in all of us. Keep your machine’s floor pan as nice as the day it was new with these custom-fit floor mats.

Model # Application

116-6068 Fits Lazer Z s/n 790,000 and higher.

133-1812 Standard on Suspension Platform models.

126-6502 Quest models. Standard on Quest S-Series models.

Lazer Z Quest

FRONT BUCKET MOUNTMake picking up debris and trash easier with Exmark's handy front bucket mount that attaches to the front of the frame.

Model # Application

126-8401 Fits Radius - Includes 5-Gallon Bucket and Mounting Bracket126-7011 Fits Radius - Mounting Bracket Only126-5105 Fits Radius - 5-Gallon Bucket only

HITCH KITSEnables owners to add attachments to their full-size Next Lazer Z models. 80 lb. capacity increases productivity by towing light implements and yard carts.

Model # Application 109-9487 Fits all Lazer Z Series models with S/N 790,000 & above except diesel models.1-631665 Both Lazer Z models and Lazer Z AS with S/N below 790,000.1-651234 Lazer Z HP and Lazer Z CT S/N 510,000 and above

models.103-9565 All Lazer Z DS-Series, D-Series, XS & XP models.109-6245 Pioneer S- and E-Series.79014 Quest E-Series. Standard on Quest S-Series.

133132

ACCESSORIES & OPTIONSA

CC

ESSO

RIES

LIGHT KIT - LEDBetter and brighter than ever, this quick installlight kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.

Model # Application

126-5382 Radius models

LIGHT KITKeep mowing after the sun goes down with two brilliant 27-watt halogen bulbs from this Hella™ Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp. The kit also features a pivot base and easy bulb replacement.

Model # Application

116-1154 Fits all Lazer Z and Pioneer models with ROPs with S/N 260,000 and above.

116-0429 Replacement Bulb Kit (one bulb) for 116-1154.103-7745 Replacement Bulb Kit (one bulb) for FRPSLKIT.130-8469 Fits all Navigator models.116-8234 Rotary Broom model.116-3298 Vantage model.

MICRO-MULCH SYSTEMThe aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Model # Application

See page 153-155

OPERATOR CONTROLLED DISCHARGEInnovative foot control delivers greater productivity than traditional hand-operated designs. The blocker door opens and closes allowing user to quickly and effectively control discharge when mowing around mulch beds, parked cars, homes or windows. (Infinitely adjustable blocker door.) Easily installs and removes without tools.

Model # Application

116-8431 Foot - Fits all Lazer Z UltraCut Series 4 & 6 models. with S/N 790,000 & above. Does not fit Supsension Platform

126-8582 Hand - Fits Radius

116-8430 Hand - Fits Vantage and wide area walks.

116-7042 Adapter Required for 36" Vantage 116-8430. 36" Turf Tracer S-Series with s/n 315,000,000 & above.

POWER DECK LIFTChange your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. It's electronic motor features Exmark's signature durability and a low profile design that leaves plenty of trailer space.

Model # Application

116-2517 Fits all 48" - 72" Lazer Z models with S/N 850,000 & above. Does not fit Suspension Platform models.

AC

CES

SORI

ES

135134


TRASH CONTAINERConveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and a durable, easy-to-clean mesh receptacle.

Model # Application

TC26 Fits all Lazer Z and Pioneer models.

116-3297 Fits Vantage models.

126-8378 Fits Quest and Radius models.

SUN SHADEEasily mounts to 2-post foldable Rollover Protection System (ROPS). Made of heavy-duty, water repellent canvas for maximum durability. Quickly and easily removable for transport. Fits all Exmark compact and full-size Lazer Z mid-mount mowers and FrontRunner. Does not fit Quest.

Model # Application

116-0513 Fits any Exmark model with ROPS (excludes Radius)

126-8077 Fits Radius models.

RED LOCKOUT MODULEMaximize fuel savings on RED equipment units with this easy to install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in "efficient" mode, regardless of mowing conditions.

Model # Application

126-3671 Fits Lazer Z X-Series units equipped with RED technology.

TOUCH UP PAINTModel # Application

n/a Black touch up spray paint - gloss black

1-850337 Red spray paint

103-9140 Red .6 oz liquid bottle

AC

CES

SORI

ES

AC

CES

SORI

ES

SEMI-PNEUMATIC TIRE ASSEMBLYCustomize your ride with just the right caster tire.

Model # Application

126-9367 Fits Radius109-9126 Fits Lazer Z 48"/52" 109-9127 Fits Lazer Z 60"/72"

137136


TURF STRIPING KITExmark® has an unmatched reputation for delivering its see-it-to-believe-it quality of cut. Now you can enhance the striping performance and produce beautifully manicured lawns with this durable and easy-to-use roller system.

• Allows you to mow and roll at the same time.

• Constructed of heavy-duty stainless steel.

• Easily adjusts for varying cutting-height settings.• Does not affect ability to get up and over curbs.• Easy to service and maintain.

Part Number Turf Striping Kit Accessory

126-5812For all FMD 523, 524, 603, 604 decks on Turf Tracer Hydros-TTX (excludes Turf Ranger®).

126-5765 For all 36" TTHP/TTS models.

126-5804 For all 48" and 52" TTHP/TTS models.

STRLZ52For all full-size 52" Lazer Z models (523 and 524 decks).

126-6215For all full-size 60" Lazer Z, Lazer Z ASX, Lazer Z AS models and Lazer Z® CT 60" (603 and 604 decks) (excludes XP’s & XS’s).

STRLZ60XP For all 60" Lazer Z XS and XP models.

STRLZ72For all 72" full-size Lazer Z, Lazer Z ASX, Lazer Z XS and Lazer Z XP models (724 decks).

126-5836 For all 46", 50" and 56" Series 5 cutting decks.

STR605 For all 60" Series 5 cutting decks.

126-5832 For all 66" and 72" Series 5 cutting decks.

TURF STRIPING KITProduce beautifully manicured lawns with this durable and easy-to-use roller system. Roller now made with high impact, high density polyethylene. No more costly bearings to maintain. Easy height adjustment. *Not for use on Rear Discharge decks.

Model # Application

116-6655 Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above. Vertical height adjustment and extension rollers on ends.

116-6656 Fits 72" Lazer Z decks with S/N 790,000 & above. Vertical height adjustment and extension rollers on ends.

116-5297 Fits Pioneer S-Series except for 44".

109-5081 Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above. 116-6657 Striper Extender Kit for 109-5081.

109-5080 Fits 72" Lazer Z decks with S/N 790,000 & above.116-6658 Striper Extender Kit for 109-5080.

126-7882 Fits Radius

QUEST SERIES TURF STRIPING KITEnhance your striping capabilities with this easy to install drag striper.

Model # Application

120-7905 Quest E-Series 42" Series 1 model.

Quest units with S/N 920,000 to 999,999.

131-4165 Quest E-Series 54" model.131-4167 Quest S-Series 34" model.121-5702 Quest S-Series 42" and Quest E-Series 42" Series 2 models.121-5706 Quest S-Series 50" and Quest E-Series 50" model.

AC

CES

SORI

ES

AC

CES

SORI

ES

139138


NAVIGATOR DUMP TUBSDebris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded one tub at a time.

Model # Application

130-8457 Fits all Navigator models.

NAVIGATOR FILL REDUCTION KITManage clippings between partial mulch and bagging operations. Reduce material collection by 50%.

Model # Application

109-5458 Fits all Navigator models. Standard on 670,000 & above

NAVIGATOR AUTOMATIC DOOR OPENER KITEnhance your productivity with this quick opening auto door system.

Model # Application

109-5459 Fits all Navigator models.

NAVIGATOR POWERED DUMPImprove productivity by not having to leave your operator's position with this power dump accessory. A full load of grass can be managed with the push of a button. Or, if dumping by hand is your preference, this accessory automatically disengages and re-engages the hopper without intervention.

Model # Application

130-8458 Fits all Navigator models

NAVIGATOR NARROW DRIVE KIT18 x 8.5-10 (pair)Model # Application

116-9590 Fits Navigators s/n 313,000,000 & above.103-9007 Fits Navigators s/n 312,999,999 & below.

NAVIGATOR WHEEL SPACER KITModel # Application

126-4877 For S/n 313,000,000 and higher using tire chains in subframe

AC

CES

SORI

ES

AC

CES

SORI

ES

QUEST BAR AND STEP ASSIST KITHelps you to step on and off of your Quest with ease. The telescoping bar adjusts to your height. Step contains anti-slip tread material and the handle is covered with soft rubber for comfort.

Model # Application

79339 Fits all Quest drive lever models with s/n 920,000 & above.

WHITE NON-MARKING SIDE BUMPERPerfect for tight, manicured spaces like cemeteries, where leaving behind black rubber marks is not an option. These durable, non-marking bumpers keep your

property looking pristine.

Model # Application

126-0854 Fits Rear Discharge units.

SIDE WEAR BAR KIT WITH FRONT ANTI-SCALP ROLLERModel # Application

127-6650 Fits Rear Discharge units.

FINISH CUT BAFFLESMaximize cut quality in the toughest conditions with this finish cut baffle kit.

Model # Application

116-8547 Fits 60" Rear Discharge units.

116-8548 Fits 72" Rear Discharge units.

QUEST CARGO CARRIERPerfect for hauling capabilities like mulch, soil, garden tools and other items for working in the yard. No "jack knifing" and it is easy to store.

Model # Application

79040 Fits all Quest models with s/n 920,000 and above. 131-7658 Weight Kit required for drive lever models.

141140


CC

ESSO

RIES

AC

CES

SORI

ES

ANTI-SIPHON ASSEMBLYAllows you to fill the tank from potable water source and protects from chemicals being siphoned back into the source.

Model # Application

126-5850 Spreader-Sprayer

CABLE GUARD PROTECTORProtect your engine cables from foreign objects such as branches and shrub while operating the machine.

Model # Application


HOPPER SCREENTwo additional hopper screen options allow you to customize your preference based on dry material application.

Model # Application

126-3242 Small Hole - Spreader-Sprayer

126-3143 Large Hole - Spreader-Sprayer

HOSE TRAYThis accessory can be added to your spreader-sprayer in order to protect the hose from foreign objects while spraying.

Model # Application


MULTI-PURPOSE BAGAllows you to carry up to two-and-a-half gallon hand-held pump sprayer to provide the ability to apply different spray application. Can also be easily adjusted for smaller uses or removed to fit through

gates.

Model # Application


SPRAYER-SPREADER NOZZLE SPRAYSModel # Application

126-2566 Red–TeeJet® Turbo FloodJet® TF-VS2

126-7171 Brown–TeeJet Turbo FloodJet TF-VS2.5

126-7170 Gray–TeeJet Turbo FloodJet TF-VS3

116-9798 White– TeeJet Turbo FloodJet TF-VS4

126-7172 Blue– TeeJet Turbo FloodJet TF-VS5

SPRAY WANDSMultiple spray wand options are available to customize to your spray preference.

Model # Application

126-8160 TeeJet PW4000A Pistol Grip w/ metal wand

126-8150 Valley Industries Blue Handle w/ metal wand

126-6325 TeeJet 50800 Black Handle w/ metal wand

126-3944 TeeJet 22670 Black Plastic Wand

A

B

C

D

AB

C

D

HOSE TRAY WITH 30 FT EXTENDED HOSEAllows you to step away from the sprayer to spray in bedding areas, tiered landscapes and hard to reach areas. Kit comes with extended hose tray to protect the hose from foreign objects.

Model # Application


143142

COLLECTION SYSTEMS

QT 42" QT 50" PNE 48" PNE 52"

Overall unit length with bagger

93.0"(236 cm)

93.0"(236 cm)

97.0"(246 cm)

97.0"(246 cm)

Overall unit width with bagger

53.2"(135 cm)

58.5"(149 cm)

58.0"(147 cm)

62.0"(157 cm)

Total bagging system weight

112 lbs(51 kg)

109 lbs(49 kg)

188 lbs(85 kg)

188 lbs(85 kg)

2-BAGGER OPTION

For all Quest E-Series and S-Series units. For all Pioneer E-Series units with serial #'s 920,000 & above.

(126-6336)* For Quest E-Series 42" Series 1 models (126-7509) For Quest E-Series & S-Series 42" Series 2 models(126-7510) For Quest E-Series & S-Series 50" Series 2 models (126-6338)* For Quest E-Series 54" models(126-7508) For Quest S-Series 34" models(131-3966) For Quest S-Series 60" models(116-5000) For Pioneer E-Series 48" & 52" models

*Requires 131-3966 Mounting Kit and 131-7658 Weight Kit

CO

LLEC

TIO

N S

YSTE

MS


CC

ESSO

RIES

FLOOR MATMake sure your dress up your store and customer vehicles with these heavy duty mats. Pliable material conforms to a variety of contours and captures mud, water and debris easily.

Model # Application

116-6067 Fits most vehicles

MUD GUARDSPerfect for store vehicles, light-duty landscape vehicles, or even for your own personal ride.

Model # Application

116-7266 Fits most vehicles

OIL CHANGE DECALSHelp remind your customers to change their engine oil and hydro oil at the right intervals with Exmark Premium Performance products.

Model # Application

116-9281 For all Exmark product

EXMARK OFFICE CHAIRTake the comfort of mowing straight into the office with Exmark’s ergonomical seat. The unsurpassed comfort and support via custom Cut-n-Sew plush foam, an adjustable seat back and heavily padded, adjustable armrests.

Model #

116-9933

145144

2-BAGGER OPTION

S-Series Bagger (LZUV2B) For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above.(126-6954) For all Radius models.

E-Series Bagger (116-3001) For all Pioneer S-Series models.(126-6122) For all Radius models.

S-Series (LZUV2B) E-Series (116-3001) E-Series 126-6122 S-Series 126-6954

Lazer Z 52"

Lazer Z 48"

PNS 44/48"

PNS 52"

PNS 60"

RAERASRAX48"

RAERASRAX52"

RAERASRAX60"

RAERASRAX48"

RAERASRAX52"

RAERASRAX60"


102.25"(259.7 cm)

102.25"(259.7 cm)

97.0"(246.4 cm)

97.0"(246.4 cm)

98.6"(250.5 cm)

97.9(249 cm)

97.9(249 cm)

98.3(250 cm)

97.9(249 cm)

97.9(249 cm)

98.3(250 cm)


67.75"(172.1 cm)

62.50"(158.8 cm)

58.0"(147.3 cm)

62.0"(157.5 cm)

74.0"(188 cm)

61.2"(155 cm)

66.1"(168 cm)

74.3(189 cm)

61.2"(155 cm)

66.1"(168 cm)

74.3(189 cm)


266 lbs(120 kg)

309 lbs(140 kg)

168 lbs(76 kg)

168 lbs(76 kg)

168 lbs(76 kg)

258 lbs(117 kg)

218 lb(99 kg)

218 lb(99 kg)

258 lbs(117 kg)

218 lb(99 kg)

218 lb(99 kg)

COLLECTION SYSTEMS

Collection Bags – 2 commercial-grade, cloth-mesh bags with reinforced bottoms.Total Collection Capacity – 8 bushels.Dump Mechanism – Manual lift off.Blower Tube – 6.0"-diameter, fixed, abrasion-resistant, molded polyethylene.Impeller – 5-bladed, 1/4" (6.4mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter.Impeller Axis – Vertical.Impeller Housing – S-Series - 0.187" thick, abrasion-resistant steel.E-Series - 0.135" thick, steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

CO

LLEC

TIO

N S

YSTE

MS

CO

LLEC

TIO

N S

YSTE

MS

147146

3-BAGGER OPTION(LZUV3B) For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.

(UV60 and UV6672) For all full-size 60" & 72" Lazer Z Diesel models.

LZUV3B UV60 UV6672

Lazer Z 60"

Lazer Z 72"

Lazer Z (Diesel)

60"

Lazer Z (Diesel)

72"


107.0"(271.8 cm)

110.0"(279.4 cm)

110.9"(281.6 cm)

115.4"(293 cm)


74.9"(190.3 cm)

87.4"(221.9 cm)

74.9"(190.3 cm)

87.4"(221.9 cm)


449 lbs(204 kg)

406 lbs(184 kg)

261 lbs(118 kg)

268 lbs(122 kg)

ULTRAVAC QUICK DUMP SYSTEM (LZUVQD7)

For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above.

Lazer Z 48"

Lazer Z 52"


102.0"(259.1 cm)

102.0"(259.1 cm)


62.50"(158.8 cm)

67.75"(172.1 cm)


331 lbs(150 kg)

288 lbs(130 kg)

Collection Hopper – Commercial-grade steel and polyethylene.Total Collection Capacity – 7 bushels.Dump Mechanism – Single motion actuation from operator's seat.Blower Tube –6.0"-diameter, fixed, abrasion-resistant, molded polyethylene.Impeller – 5-bladed, 1/4" (6.4 mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter.Impeller Axis – Vertical.Impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

COLLECTION SYSTEMSC

OLL

ECTI

ON

SYS

TEM

S

CO

LLEC

TIO

N S

YSTE

MS

Collection Bags – 3 commercial-grade, cloth-mesh bags with reinforced bottoms.Total Collection Capacity – 13.4 bushels (3 bags and hood).Dump Mechanism – Manual lift off.Blower Tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.Impeller – 5-bladed, abrasion-resistant steel with vertical axis. 15.0" diameter.Impeller Axis – Vertical.Impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

149148

Lazer Z® X-SERIES(Models with LZZ or LZX Prefix) Serial #'s 790,000 & above

Deck Bag Style Quick DumpCompleting

Kit#

486 LZUV2B LZUVQD7 109-9623


606 LZUV3B LZUVQD11 109-9627

726 LZUV3B LZUVQD11 109-9629

Lazer Z® DS-Series(Models with LZDS Prefix) Serial #'s 312,000,000 & above

Lazer Z® D-Series(Models with LZD Prefix) Serial #'s 920,000 to 999,999

Lazer Z® XS(Models with LZX Prefix) Serial #'s 790,000 to 919,999

Deck UV Model #Completing

Kit#

Floor Pan

Weight*

605 UV60 109-1167 109-2203*

605 UVD60 109-1167 109-2203*

665 UV6672 109-1168 109-2203*

665 UVD6672 109-1168 109-2203*

725 UV6672 109-1169 109-2203*

725 UVD6672 109-1169 109-2203*

*Floor Pan Weight is only needed on Liquid-Cooled XS Units.

Lazer Z® S-Series & Lazer Z E-Series(Models with LZS & LZE Prefix) Serial #'s 920,000 & above

Lazer Z Advantage Series(Models with LZA Prefix) Serial #'s 850,000 to 919,999


Kit#



604 LZUV3B LZUVQD11 116-2086

604 Propane LZUV3B LZUVQD11 126-4744

724 LZUV3B LZUVQD11 116-2087

Lazer Z® Advantage Series X(Models with LZAS Prefix) Serial #'s 850,000 to 919,999

Lazer Z® Advantage Series(Models with LZAS Prefix) Serial #'s 790,000 to 849,999


Kit#



604 LZUV3B LZUVQD11 109-9626

724 LZUV3B LZUVQD11 109-9628

COLLECTION SYSTEMSC

OLL

ECTI

ON

SYS

TEM

S

CO

LLEC

TIO

N S

YSTE

MS

ULTRAVAC QUICK DUMP SYSTEMLZUVQD11For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.

UVD60 and UVD6672For all full-size 60" & 72" Lazer Z Diesel models.

LZUVQD11 UVD60 UVD6672

Lazer Z 60"

Lazer Z 72"

Lazer Z (Diesel)

60"

Lazer Z (Diesel)

72"


106.5"(270.5 cm)

109.5"(286.2 cm)

109.4"(278.0 cm)

113.9"(289.4 cm)


75.0"(190.5 cm)

87.25"(221.6 cm)

74.9"(190.3 cm)

87.4"(221.9 cm)


477 lbs(216 kg)

434 lbs(197 kg)

333 lbs(151 kg)

278 lbs(126 kg)

Collection Hopper – Commercial-grade steel and polyethylene hopper with rear-discharge door. Commercial-grade, cloth-mesh door panel with molded lower wear panel.Total Collection Capacity – 11 bushels.Dump Mechanism – Single motion actuation from operator's seat.Blower Tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.Impeller – 5-bladed, abrasion-resistant steel; 15.0" diameter.Impeller Axis – Vertical for more efficient discharge flow.Impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.

151150

COLLECTION SYSTEMS

Quest® SP(Models with QSP Prefix) Serial #'s 850,000 to 919,999


Kit#

443116-3000 (UVE) –

116-4880116-3001 (UVE) –

483116-3000 (UVE) –

116-4882116-3001 (UVE) –

523116-3000 (UVE) –

116-4884116-3001 (UVE) –

Pioneer® S-Series*(Models with PNS Prefix) Serial #'s 920,000 & Above


Kit#

443116-3000 (UVE) –

116-4885116-3001 (UVE) –

483116-3000 (UVE) –

116-4887116-3001 (UVE) –

523116-3000 (UVE) –

116-4889116-3001 (UVE) –

604 (116-3001 (UVE – 116-6498

*The 116-3000 will fit all PNS deck sizes except 60". The 116-3001 will fit all PNS deck sizes including 60".

Non-Powered BaggersQST (serial 670,000 - 919,999)PNE (serial 920,000 and higher)


Kit# (bagger blades)

QST422 116-1084 – 116-1202

QST482 116-1084 –109-6391

PNE482 116-5000 –

QST522 116-1084 –109-6392

PNE522 116-5000 –

QST old bagger 109-9764 fits only 48 & 52

Non-Powered BaggersQT/QTE and QTS (serial 920,000 and higher)


Kit#

QTE421 116-4764 – n/a

QTS422 116-9415 – n/a

QTE501 116-4765 – n/a

QTS502 116-6512 – n/a

*The 116-3000 and 116-3001 will fit all QSP deck sizes .

CO

LLEC

TIO

N S

YSTE

MS

CO

LLEC

TIO

N S

YSTE

MS

Radius E- and S-SeriesRAE & RAS (serial 4,000,000 and higher)

Deck Bag StyleCompleting

Kit#Belt #

Included in completing kits

483 126-6122 126-6196 116-4844

523 126-6122 126-6197 1-653438

603 126-6122 126-6198 109-9249

483 126-6954 126-8272 1-653333

523 126-6954 126-8273 1-653438

603 126-6954 126-8274 126-6341

Radius X-SeriesRAX (serial 4,000,000 and higher)

Deck Bag StyleCompleting

Kit#Belt #

Included in completing kits

484 126-6122 126-6209 116-4844

524 126-6122 126-6210 1-653438

604 126-6122 126-6211 109-9249

484 126-6954 126-6466 1-653333

524 126-6954 126-6467 1-653438

604 126-6954 126-6468 126-6341

153152

Mulching capability of Exmark® mowers will be greatly enhanced by following a few simple recommendations:

1. Proper ground speed is critical to efficient mulching.

2. Blade sharpness is also vital for proper mulching. Extra blades should be available for change as necessary.

3. If mowing during the heavy growing season or mowing tall, heavy grass, mowing or crosscutting the area a second time will greatly enhance the quality of cut and evenly distribute any clumps of mulched grass left from the first pass.

4. To achieve the optimum cut with 32", 36" and 48" fixed-deck units, use three blade spacers between the blade and spindle (on models s/n 102,000 and above) or four blade spacers (on models s/n 101,999 or below).

5. Due to the fact that mulching normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient mulching capability.

Patented flow-control baffles improve the quality of cut, reduce grass and leaf blowout and lessen horsepower requirements when cutting in heavy grass.

Mulching baffles enclose each blade in an individual cutting chamber.

Series 5 mulch kits include pre-installed hardware.

Solve clipping disposal problems, and recycle valuable nutrients. Micro-Mulch accessory turns any side-discharge Exmark® into a mulching mower.

A

B

▼ The Micro-Mulch System is available on all Exmark walk-behind and riding mowers.

A

B

MICRO-MULCH & MULCHING HINTS

MU

LCH

ING

COLLECTION SYSTEMSC

OLL

ECTI

ON

SYS

TEM

S

ULTRAVAC BLOWER DRIVE BELTS44" Drive Belt LCT, LHP, PHZ ....................................................... 1-65333244" Drive Belt PNS ........................................................................ 103-086746" Series 5 Drive Belt LHP .......................................................... 1-65343848" Drive Belt LCT, LHP, Lazer Z 790,000 & above .................... 1-65333348" Drive Belt PNS ........................................................................ 116-484450" Series 5 Drive Belt LHP .......................................................... 103-086652" Drive Belt LHP, LZ, LCT, LAS, FR ........................................... 1-65343852" Drive Belt PNS ........................................................................ 1-65333356" Series 5 Drive Belt LHP ...........................................................109-924960" Drive Belt LZ, LAS, FR ........................................................... 103-086660" Series 5 Drive Belt LZ, LXS, PNS ...........................................109-924966" Series 5 Drive Belt LZ, LXS .................................................... 103-086772" Drive Belt LZ, LAS, FR............................................................ 103-086772" Series 5 Drive Belt LZ, LXS .....................................................109-1244

Cloth Bag (LHP models) ................................................................ 116-3518Cloth Bag (LCT models) ................................................................ 105-6980Cloth Bag (Lazer Z models, PNS & Radius) ..................................116-0757Cloth Bag (QST, PNE) .................................................................... 116-1209Cloth Bag (QT, QTE, QTS) .............................................................110-6674Cloth Bag (GC3602) .......................................................................126-3376Cloth Bag (EC21) ............................................................................109-7294Cloth Bag (EC30)............................................................................116-6350Bag and Frame Assembly (LHP models) ...................................... 116-3519Bag and Frame Assembly (Lazer Z models, PNS & Radius) ........116-0754Bag and Frame Assembly (LCT)....................................................109-1938Bag and Frame Assembly (QST, PNE) .......................................... 116-1244Bag and Frame Assembly (QT, QTE, QTS) ................................... 112-3994

155154

Part Number Description EC30MG

Metro VH

TTSTTHPMHP

FMDTTX VT NV FR

LZDSLZD LXSLXP

LZX LZZLZ

LZE LZS

LZAS LZALAS LHP LCT PH

PNS QSPRAE

PNE QST

QTQTEQTSQSS

RAERAS RAX Serial Number Range

MK26 26" Mulch Kit • Fits All Units116-8841 30" Mulch Kit • Fits All UnitsMK322 32" Mulch Kit • • 102,000 & Above131-7110 34" Mulch Kit • Fits All UnitsMK343 34" Mulch Kit • Fits All UnitsMK362 36" Mulch Kit • • 115,000 & Above

MK363Q*** 36" Mulch Kit • 314,999,999 & Below

126-3258 36" Mulch Kit • 315,000,000 & Above116-4247 36" Mulch Kit • Fits All UnitsMKNAV42 42" Mulch Kit • Fits All Units116-1085 42" Mulch Kit • Fits All Units131-7708 42" Mulch Kit (421) • 920,000 & Above131-7709 42" Mulch Kit (422) • 313,000,000 & AboveMK443Q 44" Mulch Kit • • • Fits All Units116-1108 44" Mulch Kit • Fits All UnitsMK465 46" Mulch Kit (Series 5) • 600,000 & Above

MK483Q 48" Mulch Kit

• • • • 314,999,999 & Below

• • 160,000 & Above

• Fits All Units

126-3259 48" Mulch Kit • 315,000,000 & AboveMK486 48" Mulch Kit (Series 4 & 6) • • • • Fits All UnitsMKNAV48 48" Mulch Kit • Fits All Units109-5980 48" Mulch Kit • Fits All UnitsMK505 50" Mulch Kit (Series 5) • 600,000 & Above116-4767 50" Mulch Kit (501) • Fits all units116-6514 50" Mulch Kit (502) • Fits all units

MK523Q*** 52" Mulch Kit

• • • • • Fits All Units***

• 130,000 to 319,999

• 130,000 to 259,999

• 440,000, to 599,999

MK526*** 52" Mulch Kit (Series 4 & 6)

• 320,000 & Above

• 260,000 & Above***

• • • • Fits All Units

109-5982 52" Mulch Kit • Fits All Units

131-7711 54" Mulch Kit (541) • Fits All Units

MK565 56" Mulch Kit (Series 5) • 600,000 & Above

135-0333 60" Mulch Kit • Fits All Units

MK603Q 60" Mulch Kit

• Fits All Units

• 600,000 & Above

• 130,000 to 319,999

• 130,000 to 189,999

MK605 60" Mulch Kit (Series 5)• 600,000 & Above

• 600,000 to 789,999


• 190,000 thru 599,999**

• 190,000 thru 599,999; 670,000 & Above***

• 320,000 & Above

• • • • • Fits All Units

MK665 66" Mulch Kit (Series 5) • • 600,000 & Above

MK725 72" Mulch Kit (Series 5) • • 600,000 & Above


• All Units thru 599,999***

• All Units thru 599,999; 790,000 & Above***

• • Fits All Units

DECK SERIES GUIDESeries 6 = UltraCut™ Series 6 Deck Series 5 = Series 5 DeckSeries 4 = UltraCut Series 4 Deck (Blade bolt diameter changed at s/n 540,000) (s/n 540,000 and higher use 15/16" diameter, red colored blade)

NOTE: *** If you have a machine with s/n below 540,000, your mulch kit will require a blade with 5/8" arbor hole not provided in standard kit.

MULCH KIT CHARTSM

ULC

HIN

G

MU

LCH

ING

157156

PREMIUM FUEL TREATMENTEngineered to rapidly dissolve carbon & varnish deposits. Quickly cleans injectors, rings, carburetor, valves and fuel line. One treatment delivers immediate results for older engines. Regular use helps engines last longer at peak performance. E10 Ethanol approved.

Model # Application

116-9645 4 oz. bottle

126-1511 16 oz. bottle

PREMIUM HYDRO OILDesigned for today's more demanding hydraulic systems to enhance control performance. Delivers superior anti-wear protection and twice the shear stability of competing oils. For use with any Exmark hydraulic system.

Model # Application

109-9828 Quart bottle

116-1218 Gallon container

116-7897 55-Gallon drum

PERFORMANCE PRODUCTS

PREMIUM ENGINE OILUsing a synthetic formulation far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet. Exmark premium is the right choice for your mower.

Model # Application

SAE 10W-30/SAE 30 116-3373 Quart bottle 116-3374 55-gallon drum

20W-50126-1474 Quart bottle



UTV Formulation126-5583 Quart bottle

MIS

C

MIS

C

HYDRO MAINTENANCE KIT - Lazer Z ModelsIncludes 1 gallon jug of Exmark Premium Hydro Oil, and 2 hydro filters.

Model # Application

126-8103 For use with Lazer Z models s/n 790,000 and above or 2009 model year and later.

PREMIUM GEAR LUBESAE 80W-90, designed to keep your UTV performing at its peak • Shear stable, hypoid gear lube • Includes a premium additive system to combat wear, oxidation, rust & corrosion

Model # Application

126-5585 Quart Bottle

ENGINE MAINTENANCE KITContains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes oil, oil filter, fuel filter, air filter, spark plug and fuel treatment

Model # Application

126-9301 Exmark single-cylinder engine (Quest and Radius)

126-9287 Exmark V-Twin engine (Quest and Radius)

126-9288 Kohler engine (Radius)

126-9289 Kawasaki engine (Radius)

HYDRO MAINTENANCE KIT - Radius ModelsIncludes 5 quarts of Exmark Premium Hydro Oil, and 2 hydro filters.

Model # Application

126-9867 For use with Radius Models

159158

PERFORMANCE PRODUCTS

EXMARK PREMIUM

SAE 10W-50

EXMARK PREMIUM

SAE 30/10W-30

EXMARK PREMIUM BIG BLOCK

SAE 20W-50

Engine Mfg SAE

20W-50

Aftermarket

SAE 10W-30

Base Stock (group) 3+ 3+ 3+ 2 2

Synthetic Formulation YES YES YES NO NO

Small Engine Formulation YES YES YES YES NO

Meets API CI-4 Diesel Rating YES YES YES NO NO

High Zinc Content YES YES YES NO NOHigh Phosphorus Content

YES YES YES NO NO

Cold Start Advantage YES YES YES NO NO

Corrosion Protection YES YES YES NO SOME

Protects Against Soot Related Viscosity Increase

YES YES YES NO NO

Severe Service YES YES YES YES NO

Multi-Season Use YES NO NO NO NO

Price Advantage NO NO NO YES YES

SAE 30 / 10W-30 Concerned about what grade is right for your engine? Exmark Premium covers a broader range of viscosity requirements than any oil on the market. Worried about shear down? We excluded VI improvers, extending the life of your oil in the toughest conditions.

• Full synthetic formulation gives you peak performance. Don’t settle for less.

• Most versatile oil in the industry.• Meets zero shear requirements of a straight grade SAE 30 as

well as the cold temp properties of a 10W-30.• Reduce friction & wear over standard mineral formulations.• Superior corrosion protection over converntional oil - even in

corrosive, humid environments.• Unlike automotive oils, Exmark Premium contains additional

zinc and phosphorous for exceptional anti-scuff protection.• Meets API CI-4 Diesel rating.

SAE 20W-50 A first for our industry, Exmark recently introduced a 20W-50 that sets the standard for big block, air-cooled engines in a mowing application. Great for small blocks in high stress conditions too, this new oil contains all the key additives of our other engine oil within a fully synthetic formulation.


• Reduce friction & wear over standard mineral formulations.• Superior corrosion protection over conventional oil - even in

corrosive, humid environments.• Unlike automotive oils, Exmark Premium contains additional

zinc and phosphorous for exceptional anti-scuff protection.• High viscosity index (VI) base stocks maximize lubrication at

all temperatures.• Meets API CI-4 Diesel rating.

SAE 10W-50 Eliminate the hassle of having to change oil viscosity with the change of seasons. This new grade gives you the same great formulation of our other oils, but also affords a uniquely wide temperature range to operate within.


• A unique, wide span multi-grade viscosity• Combines easy starting in cold weather with maximum

protection in high temperature operation• Full synthetic base stock and leading edge additives provide

a shear stable formulation for multi-season use• Commercial quality for severe service application• Meets API CI-4 Diesel rating.

MIS

C

MIS

C

161160

Efficiency at 100% and 80%

MPH21" Width 30" Width 34" Width 36" Width 42" Width 48" Width 50" Width 52" Width 60" Width 72" Width

100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80%

1.5 0.32 0.25 0.45 0.36 0.52 0.41 0.55 0.44 0.64 0.51 0.73 0.58 0.76 0.60 0.79 0.63 0.91 0.73 1.09 0.88

2.0 0.42 0.34 0.61 0.48 0.69 0.55 0.73 0.58 0.85 0.68 0.97 0.78 1.01 0.81 1.05 0.84 1.21 0.97 1.45 1.16

2.5 0.53 0.42 0.76 0.60 0.86 0.69 0.91 0.73 1.06 0.85 1.21 0.97 1.26 1.01 1.31 1.05 1.52 1.21 1.83 1.45

3.0 0.64 0.51 0.91 0.72 1.03 0.82 1.09 0.87 1.27 1.02 1.45 1.16 1.52 1.21 1.58 1.26 1.82 1.45 2.19 1.74

3.5 0.74 0.59 1.06 0.85 1.20 0.96 1.27 1.02 1.48 1.19 1.70 1.36 1.77 1.41 1.84 1.47 2.12 1.70 2.54 2.04

4.0 0.85 0.68 1.21 0.97 1.37 1.1 1.45 1.16 1.70 1.35 1.94 1.55 2.02 1.62 2.10 1.68 2.42 1.94 2.90 2.33

4.5 1.55 1.23 1.64 1.31 1.91 1.52 2.18 1.74 2.27 1.81 2.36 1.89 2.73 2.18 3.27 2.61

5.0 1.72 1.37 1.82 1.45 2.12 1.69 2.42 1.94 2.53 2.02 2.63 2.10 3.03 2.42 3.64 2.90

5.5 1.89 1.51 2.00 1.60 2.33 1.86 2.67 2.13 2.78 2.22 2.89 2.31 3.33 2.66 4.00 3.19

6.0 2.06 1.65 2.18 1.74 2.55 2.03 2.91 2.33 3.03 2.42 3.15 2.52 3.64 2.91 4.37 3.49

6.5 2.23 1.78 2.36 1.89 2.76 2.20 3.15 2.52 3.28 2.62 3.41 2.73 3.94 3.15 4.73 3.77

7.0 2.40 1.92 2.55 2.03 2.97 2.37 3.39 2.72 3.54 2.83 3.68 2.94 4.24 3.40 5.05 4.08

7.5 2.73 2.18 3.64 2.90 3.94 3.15 4.55 3.63 5.45 4.35

8.0 2.91 2.32 3.88 3.10 4.20 3.36 4.84 3.88 5.80 4.66

8.5 4.12 3.29 4.46 3.56 5.15 4.11 6.18 4.94

9.0 4.36 3.48 4.73 3.77 5.46 4.35 6.53 5.23

9.5 4.61 3.68 4.99 3.98 5.76 4.59 6.90 5.52

10.0 4.85 3.87 5.25 4.19 6.06 5.00 7.27 6.00

11.0 6.66 5.33 8.02 6.42

12.0 7.27 5.81 8.73 6.97

Formulas for calculating acres per hour:100% efficiency MPH x width of cut ÷ 99 = acres per hour80% efficiency MPH x width of cut ÷ 124 = acres per hour

** Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes. Exmark® Mfg. believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping.

MOWER ACRES-PER-HOUR PRODUCTIVITYM

ISC

MIS

C

163162

ENGINE SPECIFICATIONSM

ISC

MIS

C

Models Used On

Engine Mfg.Displacement

cu. in. (cc)Engine RPM

Engine Model

Spec. No. Cyl. Crank-Shaft CoolingPressure Lube /Oil

Filter

Oil Capacity Quart (liter)

Starting

ECX Honda® 9.9 (163) 3,300 GXV160 160UH2 A1TT 1 vert air no/no .7 (.7) recoilECS Kawasaki® 10.9 (179) 3,300 FJ180V BM11-M 1 vert air yes/no .7 (.7) recoilECX Kawasaki 10.9 (179) 3,300 FJ180V BM17-M 1 vert air yes/yes .7 (.7) recoilECX (BBC) Kawasaki 10.9 (179) 3,300 FJ180V BM07-M 1 vert air yes/yes .7 (.7) recoilARS Kawasaki 10.9 (179) 3,600 FJ180V BM09-M 1 vert air yes/yes .7 (.7) recoilEC30 Kawasaki 10.9 (179) 3,500 FJ180V BM21-M 1 vert air yes/yes .7 (.7) recoilSSS Subaru 16.17 (265) 3,600 EX27 DS0290 1 horz air no/no 1.1 (1.05) electricSDS Subaru 16.17 (265) 3,600 EX27 D50440 1 horz air no/no 1.1 (1.05) recoilBR Kohler® 12.7 (208) 3,600 CH270 PH-CH270-3119 1 horz air no/no 0.63 (0.6) recoilQTE, QTS Exmark 27.7(452) 3,300 LC1P92F-1 J9786 1 vert air yes/yes 1.4(1.5) electricMGS, VHS Kawasaki 36.8 (603) 3,600 FS481V _S06-R 2 vert air yes/yes 2.1 (2.0) recoilTTS Kawasaki 36.8 (603) 3,600 FS481V S28-R/S 2 vert air yes/yes 2.1 (2.0) recoilARX Kawasaki 36.8 (603) 3,600 FS541V AS32-R15 2 vert air yes/yes 2.1 (2.0) electricTTS Kawasaki 36.8 (603) 3,600 FS541V _S29-R/S 2 vert air yes/yes 2.1 (2.0) recoilVTS Kawasaki 36.8 (603) 3,600 FS541V _S06-R 2 vert air yes/yes 2.1 (2.0) electricTTS Kawasaki 36.8 (603) 3,600 FS600V _S27-R/S 2 vert air yes/yes 2.1 (2.0) electricTTX Kohler 42.4 (694) 3,600 ECV650 PS-ECV650-3017 2 vert air yes/yes 2.0 (1.9) electricQTE, QTS, QSS Exmark 43.2(708) 3,300 LC2P77F K2056 2 vert air yes/yes 2.1(2.0) electric

RAE,QTS Exmark 43.2 (708) 3,600 LC2P77F K3728 2 vert air yes/yes 2.1 (2.0) electricRAX Kawasaki 44.3 (726) 3,800 FX651V _S13-R 2 vert air yes/yes 2.2 (2.1) electricRAX Kawasaki 44.3 (726) 3,800 FX691V _S25-R 2 vert air yes/yes 2.2 (2.1) electricRAX Kawasaki 44.3 (726) 3,800 FX730V _S26-R 2 vert air yes/yes 2.2 (2.1) electricLZS Kawasaki 44.3 (726) 3,750 FX651V _S07-R 2 vert air yes/yes 2.2 (2.1) electricLZE Kawasaki 44.3 (726) 3750 FX651V _S10-R 2 vert air yes/yes 2.2 (2.1) electricVTX Kawasaki 44.3 (726) 3,600 FX651V _S12-R 2 vert air yes/yes 2.2 (2.1) electricTTX, TTS Kohler 45.6 (747) 3,600 PCV680 PCV680-3015 2 vert air yes/yes 2.1 (2.0) electricTTX Kawasaki 44.3 (726) 3,600 FX691V _AS23-R 2 vert air yes/yes 2.2 (2.1) electricVTS Kawasaki 44.3 (726) 3,600 FX691V S20-R 2 vert air yes/yes 2.2 (2.1) electricRAS Kohler 44.2 (725) 3,750 ZT710 PS-ZT710-3023 2 vert air yes/yes 2.0 (1.9) electricRAS Kohler 44.2 (725) 3,750 ZT720 PS-ZT720-3022 2 vert air yes/yes 2.0 (1.9) electricLZE Kawasaki 44.3 (726) 3,750 FX730V _S16-R 2 vert air yes/yes 2.2 (2.1) electricNV Kohler 45.6 (747) 3,600 ECH730 PS-ECH730-3064 2 horz air yes/yes 2.1 (2.0) electricVTS, VTX Kohler 45.6 (747) 3,600 ECV730 PS-ECV730-3031 2 vert air yes/yes 2.0 (1.9) electricLZE Kohler 45.6 (747) 3,800 CV732 PS-CV732-3030 2 vert air yes/yes 2.1 (2.0) electricNV Kohler 44.0 (725) 3,600 CH740 PS-CH740-3182 2 horz air yes/yes 2.0(1.9) electricVTS Kohler 45.6 (747) 3,600 PCV740 PS-PCV740-3015 2 vert air yes/yes 2.0 (1.9) electricLZE, LZS Kohler 45.0 (747) 3,750 ECV740 PS-ECV740-3040 2 vert air yes/yes 2.0 (1.9) electricLZX Kohler 45.0 (747) 3,650 ECV740 PS-ECV740-3039 2 vert air yes/yes 2.0 (1.9) electricVTS, VTX Kohler 45.6 (747) 3,650 ECV740 PS-ECV740-3038 2 vert air yes/yes 2.0 (1.9) electricLZS Kohler 45.6 (747) 3,750 PCV740 PCV740-3016 2 vert air yes/yes 2.1 (2.0) electricRAS Kohler 45.6 (747) 3,750 ZT740 PS-ZT740-3041 2 vert air yes/yes 2.0 (1.9) electricLZE Kohler 45.6 (747) 3,750 CV742 PS-CV742-3037 2 vert air yes/yes 2.1 (2.0) electricLZS Kohler 45.6 (747) 3,750 ECV749 PS-ECV749-3046 2 vert air yes/yes 2.1 (2.0) electricLZE Kawasaki 52.0 (852) 3,750 FX751V _S07-R 2 vert air yes/yes 1.9 (1.8) electricLZE, LZS, LZX Kawasaki 52.0 (852) 3,750 FX801V _S04-R 2 vert air yes/yes 1.8 (1.9) electric

LZX Kawasaki 61.0 (999) 3,750 FX921V S04-R 2 vert air yes/yes 1.8 (1.9) electricLZX Kohler 60.9 (999) 3,800 ECV940 PS-ECV940-3012 2 vert air yes/yes 2.1 (2.0) electricLZX Kohler 60.9 (999) 3,650 ECV940 PS-ECV940-3015 2 vert air yes/yes 2.1 (2.0) electricLZX Kohler 60.9 (999) 3,650 ECV980 PS-ECV980-3013 2 vert air yes/yes 2.1 (2.0) electricLZX Kohler 60.9 (999) 3,800 ECV980 PS-ECV980-3014 2 vert air yes/yes 2.1 (2.0) electricLZDS Kubota® 54.8 (898) 3,850 D902 D902-E4B-EXM-1 3 horz liquid yes/yes 3.9 (3.7) electric

165164

UNIT TYPE COMMERCIAL CONSUMER

COMMERCIAL RIDERS & FRONT MOUNT DECKS

Lazer Z DS-SeriesNavigator 2 Year Limited

Lazer Z X-Series Limited Warranty - 5 Year or 1,500 Hours (with No Hour Limit First 2 Years)

Lazer Z S-SeriesLazer Z E-Series

Limited Warranty - 5 Year or 1,250 Hours (with No Hour Limit First 2 Years)

Vantage 3 Year Limited(Year 3 is parts only)

5 Year or 750 Hours Limited

Radius X-Series 4 Year or 1,000 Hours Limited

Radius S-Series 4 Year or 750 Hours Limited

Radius E-Series 4 Year or 500 Hours Limited

Pioneer S-Series 2 Year Limited 4 Year or 500 Hours Limited

Pioneer E-Series 1 Year Limited 4 Year or 500 Hours Limited

Quest S-SeriesQuest E-Series 30 Days Limited 3 Year Limited

WALK-BEHINDS

Commercial Walk-Behinds (exclude 30" & 21") 2 Year Limited

30" & 21" Mowers 1 Year Limited

TURF MANAGEMENT PRODUCTS

Slicer Seeder, Aerator, Stand-On Aerator, Rotary Broom, Spreader Sprayer

1 Year Limited

UTILITY VEHICLES

1 Year Limited 1 Year or 1,000 Hours Limited

ACCESSORIES

Accessories (except as noted below) 1 Year Limited

Striping Roller & Operator Controlled Discharge 90 Days

Quest Accessories 30 Day Limited 1 Year Limited

MISCELLANEOUS

Peerless 5-Speed Transmission 2 years (extended 21 months beyond

manufacturer's warranty of 90 days)

WARRANTY EXCEPTION

Battery 1 Year, $45 Flat Rate

Engine*5 Year - Subaru4 Year or 500 Hours - Exmark Radius3 Year Consumer, 90 Day Commercial - Exmark Quest3 Year - Kawasaki3 Year - Kohler2 Year - Honda2 Year - Kubota

See warranty statements for complete details. *Please refer to the engine manufacturer's warranty statement that is included in the literature packet. We are not authorized to handle warranty adjustments on engines. This warranty only includes the cost of parts and labor.

WARRANTY IN BRIEFENGINE DISPLACEMENT/HORSE POWER CROSS REFERENCE

Visit the OEM manufactures website for published engine horse power ratings

Exmarkhttps://www.exmark.com/engines

Hondahttp://engines.honda.com

Kawasaki

http://www.kawasakienginesusa.com/engines

Kohlerhttps://power.kohler.com/na-en/engines

Kubota

http://www.kubotaengine.com/

MIS

C

MIS

C

167166

6 TO 6 TEC

HN

ICA

L SUPPO

RT PRO

GR

AM

In an effort to better serve our dealers, the Customer Service Department extends its support hours during the cutting season.*

Monday through Friday 6:00 a.m. to 6:00 p.m.

(Hours are based on Central Time zone.)

Call our Customer Service Department:

(402) 223-6375or E-mail our Service Department at

[email protected]*Cutting season is April through September.

Model Year Serial Number Range

2017 400,010,500 & Above

2016 316,000,000 -316,999,999

2015 315,000,000 -315,999,999

2014 314,000,000 -314,999,999

2013 313,000,000 - 313,999,999

2012 312,000,000 - 312,999,999

2011 920,000-999,999

2010 850,000-919,999

2009 790,000-849,999

2008 720,000-789,999

2007 670,000-719,999

2006 600,000-669,999

2005 510,000-599,999

2004 440,000-509,999

2003 370,000-439,999

2002 320,000-369,999

2001 260,000-319,999

2000 220,000-259,999

1999 190,000-219,999

1998 150,000-189,999

1997 130,000-149,000

1996 115,000-129,999

1995 102,000-114,999

1994 90,000-101,999

1993 80,000-89,999

1992 70,000-79,999

1991 60,000-69,999

1990 50,000-59,999

1989 40,000-49,999

1988 30,000-39,999

1987-Earlier 29,999 and Below

MODEL YEAR & SERIAL NUMBERS 6 to 6 TECHNICAL SERVICE SUPPORTM

ISC

MIS

C

EXMARK MFG. CO., INC. 2101 Ashland Avenue P.O. Box 808Beatrice, NE 68310-0808Call (402) 223-6300Fax (402) 223-6384www.exmark.com

Exmark®, Exmark Parts Plus®, Lazer Z®, Metro,® Navigator, ® Pioneer®, Quest®, Radius, ®

Turf Tracer,® Vantage® and UltraVac® are registered trademarks, and CustomRide™, Micro-Mulch™, and Viking™ are trademarks of Exmark Mfg. Co., Inc.

Kohler® is a registered trademark, and Kohler® Command™ is a trademark of Kohler Company. Kawasaki® is a registered trademark of Kawasaki Motors Corp. Turf Mate, ®

Multi-Trac®, Turf Saver® and Turf Master® are registered trademarks of Carlisle Tire & Rubber Co. Honda® is a registered trademark of American Honda Motor Co., Inc. Kubota® is a registered trademark of Kubota Engine America Corp. Hydro-Gear® is a registered trademark of Hydro-Gear. Subaru® is a registered trademark of Subaru of America, Inc. TeeJet® and FloodJet® are registered trademarks of TeeJet Technologies.

Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligation.

Printed in the U.S.A. 2017. Revised 04/04/2017Form No. 135-0211

Documents

2017...A. 5.5" deck depth. 4-point suspension. Full-floating. B. 7-gauge high-strength low alloy deck construction. C. High-strength polymer belt covers. D. Reinforced anti-scalp rollers