Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
PRICE LIST 2017
BECXMACHINES.COM The validity of this price list is subject to potential printing errors.
EFFICIENT - RELIABLE - DURABLE
2 HEDGE CUTTERHS75HR
Working width: 77 cmCutting capacity: up to 2.0 cmWeight: 73 kgMounting bracket: 80 x 80 mmMaximum revolutions: 3000 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 24 l/min (only available with motors 8cc)Min. - max. oil pressure: 180 - 210 bar
Machine features 8cc motors(circa 24 liters/minute continuous volume flow needed)
BEC-HS75HR € 6,950
Additional charge flow regulator HS75HR BEC-MP021 € 540
An HS75HR comes with 110 cm hoses featuring quick couplings.
SPECIFICATIONS
The validity of this price list is subject to potential printing errors.
becxmachines.com - [email protected]
SPECIFICATIONS
3
HS130HR
HEDGE CUTTER
Working width: 127 cmCutting capacity: up to 2.5 cmWeight: 134 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 30 l/min (featuring 11cc motors as standard)Min. - max. oil pressure: 180 - 210 bar
Basic machine features 11cc motors(circa 30 liters/minute continuous volume flow needed)
BEC-HS130HR € 8,950
Additional charge 16cc motors instead of 11cc motors(circa 45 liters/minute continuous volume flow needed)
BEC-MP001 € 125
Additional charge flow regulator HS130HR BEC-MP006 € 540
An HS130HR comes with 110 cm hoses featuring quick couplings.
4 HEDGE CUTTERHS131HR
SPECIFICATIONS
The validity of this price list is subject to potential printing errors.
Working width: 131 cmCutting capacity: up to 3 cmWeight: 159 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 45 l/min (only available with motors16cc)Min. - max. oil pressure: 180 - 210 bar
Machine features 16cc motors(circa 45 liters/minute continuous volume flow needed)
BEC-HS131HR € 9,950
An HS131HR comes with adjustable oilflow regulator and pressure valves on all hydraulic motors.
An HS130HR comes with 110 cm hoses featuring quick couplings.
becxmachines.com - [email protected]
5
HS150HR
SPECIFICATIONS
HEDGE CUTTER
Working width: 150 cmCutting capacity: up to 3.5 cmWeight: 198 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2000 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 45 l/min (only available with motors 22cc )Min. - max. oil pressure: 180 - 210 bar
Basic machine features 22cc motors(circa 45 liters/minute continuous volume flow needed)
BEC-HS150HR € 11,300
Additional charge flow regulator HS150HR BEC-MP005 € 590
Additional charge mounting bracket on rear HS150HR instead of originalPrice separate mounting bracket rear HS150HR
BEC-MP004BEC061200
€ 180€ 300
An HS150HR comes with pressure valves on the second and third hydraulic motor
6
The validity of this price list is subject to potential printing errors.
HS210HR
Working width: 211 cmCutting capacity: up to 3 cmWeight: 269 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2500 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 90 l/min (featuring 16cc motors as standard)Min. - max. oil pressure: 180 - 210 bar
SPECIFICATIONS
Machine features 16cc motors(circa 90 liters/minute continuous volume flow needed)
BEC-HS210HR € 15,900
An HS210HR comes with 2x 3/4” and 1x 3/8” screw couplings.
HEDGE CUTTER
HYDRAULIC ARMWLA60
SPECIFICATIONS (basic machine)
7
Basic machineRequired: 2x double hydraulic functions for operating WLA60
BEC-WLA60 € 5,700
Additional charge for valve used to convert one double function into two BEC-MP008 € 880
Required: 1x double hydraulic function for operating WLA601x Switchable 12V power source
A WLA60 comes with hoses to the mounting plate and with a flat back plate with 4bolt holes (see image)
Extension width: 60 cmTilt angle: 105° degreesWeight: 100 kgTool clamp: 80 x 80 mmMaximum tool weight: 200 kgRequired doublehydraulic functions: 2Min. - max. oil pressure: 140 - 250 bar
Take note: A separate continuous volume flow will be needed to power your cutter/tool.
becxmachines.com - [email protected]
8
The validity of this price list is subject to potential printing errors.
DRHS55
Height in relation to coupling: 55 cmTilt angle (horizontal/vertical): 180° degreesWeight: 185 kgTool clamp: 80 x 80 mmRequired doublehydraulic functions: 2
Take note: A separate continuous volume flow will be needed to power your cutter/tool.
SPECIFICATIONS (basic machine)
DOUBLE ROTATOR
Basic machine with CW10 mounting plate BEC-DRHS55 € 5,300
Additional charge CW20 mounting plate BEC-MP010 € 135
Additional charge CW30 mounting plate BEC-MP011 € 170
A DRHS55 comes without hoses or couplings.
OBKS50-35
becxmachines.com - [email protected]
WEED BRUSH EDGE CUTTER
€ 795,-BEC-MP025
Basic machine:Required:
- Side shift + blade-holder arm mechanically adjustable- Continuous volume oil flow ( Pressure - Return - Drain line)
BEC-OBKS50-35 € 6,950
Additional charge for hydraulically operated working width BEC-MP014 € 470
Required: - 1x Double hydraulic function
Additional charge for hydraulic blade height configuration BEC-MP007 € 275
Required: - 1x Double hydraulic function
Additional charge for valve block used to convert one double function into two BEC-MP015 € 880
Required: - 1x double hydraulic function for operating OBKS50-35- 1x Switchable 12V power source
Additional charge adjustable brush head (mechanical adjustment) BEC-MP017 € 450
An OBKS50-35 comes with a flat back cover with 4 bolt holes (see image)
Additional charge flexible guiding rail for hydraulic hoses
An OBKS50-35 comes with hoses to the mounting plate.
9
SPECIFICATIONS (basic machine)Brush diameter: 50 cmBlade diameter: 35 cmWeight: 170 kgRequired oil flow brush: 20 - 60 l/minMin. - max. oil pressure: 180 - 250 bar
10
The validity of this price list is subject to potential printing errors.
OB90M
SPECIFICATIONS (basic machine)
WEED BRUSH
Basic machine: BEC-OB90M € 2,950
An OB90M comes with hoses to the mounting plate.
Brush diameter: 90 cmWeight: 152 kgRequired continuous volume flow brush: 20 - 60 l/mMin. - max. oil pressure: 180 - 250 bar
OB90
becxmachines.com - [email protected]
An OB90 comes with hoses to the mounting plate.
Brush diameter: 90 cmWeight: 200 kgRequired oil supply brush: 20 - 60 l/mRequired doublehydraulic functions: 3Min. - max. oil pressure: 180 - 250 bar
11WEED BRUSH
SPECIFICATIONS (basic machine)
Additional charge for three-point hitch connection Cat 1-2
BEC-OB90
BEC-MP026
€ 9,300Basic machine
€ 490
Additional charge for other hitch connections on request
Additional charge for hydraulic hoses and couplings on request
An OB90 comes with two pressure controlled valves on the brush head
12
OBKS90-45
The validity of this price list is subject to potential printing errors.
SPECIFICATIONS (basic machine)
WEED BRUSH EDGE CUTTER
Basic machine: BEC-OBKS90-45 € 12,900
Brush diameter: 90 cmWeed brush diameter: 45 cmWeight: 260 kgRequired continuous volume flow brush: 20 - 60 l/mRequired doublehydraulic functions: 3Required 12 volt. conn.: 2Min. - max. oil pressure: 180 - 250 bar
An OB90 comes with hoses to the mounting plate.
Additional charge for three-point hitch connection Cat 1-2 € 490
Additional charge for other hitch connections on request
Additional charge for hydraulic hoses and couplings on request
An OB90 comes with two pressure controlled valves on the brush head
BEC-MP026
becxmachines.com - [email protected]
13
becxmachines.com - [email protected]
13WINDBREAKER CUTTERWS300HR
SPECIFICATIES
13
BEC-WS300HR € 23.400,-
AN WS300HR comes with 2x 3/4” en 1x 3/8” screw couplings
Machine features 16cc motors(circa 100 liters/minute continuous volume flow needed)
Working width: 300 cmCutting capacity: up to 3.5 cmWeight: 450 kgMounting bracket: 80 x 80 mmMaximum revolutions: 2000 rpmRequired connections: Pressure - Return - Drain line (pressure-free)Required oil supply: circa 100 l/min (only available with 22cc motor)Min. - max. oil pressure: 180 - 210 bar
Contact via your dealer:
Prices are valid from January 2017 and are subject topotential errors. All previous price lists hereby expire.All prices and versions are non-binding and can bealtered without prior notice.
Prices: excl. VATDelivery: ex factory Moergestel (NL)Delivery time: to be agreed
BECX MACHINES BVDe Sonman 355066 GJ MoergestelNetherlandswww.becxmachines.cominfo@becxmachines.comtel: +31 (0) 13 513 1140