Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL AND INTERNATIONAL CONFERENCES
– PAPER PRESENTATION
Sl.
No. Students Name
Sem/
Year Topic Place Date
1 S. Vino anand VIII /
IV
Effect of wear behavior of
AL6061 Reinforced with tungsten
carbide
Rathinam Technical
Campus, Coimbatore 14.03.2018
2 P. Vishnu Raj VIII /
IV
Effect of wear behavior of
AL6061 Reinforced with tungsten
carbide
Rathinam Technical
Campus, Coimbatore 14.03.2018
3 S. Santhosh VIII /
IV
Effect of wear behavior of
AL6061 Reinforced with tungsten
carbide
Rathinam Technical
Campus, Coimbatore 14.03.2018
4 G. Shanuganadhan VIII /
IV
Effect of wear behavior of
AL6061 Reinforced with tungsten
carbide
Rathinam Technical
Campus, Coimbatore 14.03.2018
5 K. Santhosh Kumar VIII /
IV
An Overview: Natural fiber
reinforced hybrid composites,
chemical treatments and
application areas
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
6 L. Vairamuthu VIII /
IV
An Overview: Natural fiber
reinforced hybrid composites,
chemical treatments and
application areas
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
7 B. Sathish kumar VIII /
IV
An Overview: Natural fiber
reinforced hybrid composites,
chemical treatments and
application areas
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
2017 - 2018
8 B.Bharath VIII /
IV
Experimental study on mechanical
properties of Kenaf-Glass particle
reinforced epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
9 R.Gokul VIII /
IV
Experimental study on mechanical
properties of Kenaf-Glass particle
reinforced epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
10 G. Arun kumar VIII /
IV
Experimental evaluation of
volume fraction of mechanical and
physical properties of tea and
pineapple fiber reinforced hybrid
epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
11 R. Dinesh kumar VIII /
IV
Experimental evaluation of
mechanical behavior of natural
fiber reinforced hybrid epoxy
composites – Influence of carbon
fiber hybridization
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
12 Esakkipandian S VIII /
IV
Experimental evaluation of
mechanical behavior of natural
fiber reinforced hybrid epoxy
composites – Influence of carbon
fiber hybridization
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
13 R. Gopalsamy VIII /
IV
Experimental evaluation of
mechanical behavior of natural
fiber reinforced hybrid epoxy
composites – Influence of carbon
fiber hybridization
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
14 A.Ashok VIII /
IV
Experimental evaluation of
volume fraction of mechanical and
physical properties of tea and
pineapple fiber reinforced hybrid
epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
15 V.Aravind VIII /
IV
Experimental evaluation of
volume fraction of mechanical and
physical properties of tea and
pineapple fiber reinforced hybrid
epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
16 A.Ashok VIII /
IV
Experimental evaluation of
volume fraction of mechanical and
physical properties of tea and
pineapple fiber reinforced hybrid
epoxy composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
17 M.Balaji VIII /
IV
Influence of fiber treatment on the
characteristics of tea and kenaf
polyester composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
18 S.Jagathala tharasan VIII /
IV
Influence of fiber treatment on the
characteristics of tea and kenaf
polyester composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
19 J.Ajeeth kumar VIII /
IV
Influence of fiber treatment on the
characteristics of tea and kenaf
polyester composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
20 N.Sathish VIII /
IV
Influence of fiber treatment on the
characteristics of tea and kenaf
polyester composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
21 P.Sugan kumar VIII /
IV
Influence of fiber treatment on the
characteristics of tea and kenaf
polyester composites
VelTech Rangarajan
Dr. Sagunthala R&D
Institute of Science
and Technology,
Chennai.
22.02.2018
23.02.2018
24.02.2018
22 Aaditya Mohandas VIII /
IV
Design and Fabrication of Exhaust
Gas Recirculation System For
Two Wheelers
AL-Ameen
Engineering college,
Erode
05.04.2018
23 Aravindhan.V VIII /
IV
Design and Fabrication of Exhaust
Gas Recirculation System For
Two Wheelers
AL-Ameen
Engineering college,
Erode
05.04.2018
24 C.Balaji VIII /
IV
Design and Fabrication of Exhaust
Gas Recirculation System For
Two Wheelers
AL-Ameen
Engineering college,
Erode
05.04.2018
25 R.Kiruthiha VIII /
IV
Cycle time reduction in engine
bearing manufacturing using
industrial engineering tool
AL-Ameen
Engineering college,
Erode
05.04.2018
26 P.G.Paarnica VIII /
IV
Cycle time reduction in engine
bearing manufacturing using
industrial engineering tool
AL-Ameen
Engineering college,
Erode
05.04.2018
27 A.G.Chandralekha VIII /
IV
Cycle time reduction in engine
bearing manufacturing using
industrial engineering tool
AL-Ameen
Engineering college,
Erode
05.04.2018
27 A.Arockia Infant
Vivin
VIII /
IV
Multi-purpose seed sowing,
fertilizer sprayer, grass cutter
AL-Ameen
Engineering college,
Erode
05.04.2018
27 S.Hari kumar
VIII /
IV
Multi-purpose seed sowing,
fertilizer sprayer, grass cutter
AL-Ameen
Engineering college,
Erode
05.04.2018
28 S.Gowtham
VIII /
IV
Multi-purpose seed sowing,
fertilizer sprayer, grass cutter
AL-Ameen
Engineering college,
Erode
05.04.2018
29 Arun kumar.K
VIII /
IV
Emission control during cold start
of motor cycle by latent heat
storage system
AL-Ameen
Engineering college,
Erode
05.04.2018
30 Arun prasanth.A
VIII /
IV
Emission control during cold start
of motor cycle by latent heat
storage system
AL-Ameen
Engineering college,
Erode
05.04.2018
31 Hari prasanth.B
VIII /
IV
Emission control during cold start
of motor cycle by latent heat
storage system
AL-Ameen
Engineering college,
Erode
05.04.2018
32 Balaji.M
VIII /
IV
Emission control during cold start
of motor cycle by latent heat
storage system
AL-Ameen
Engineering college,
Erode
05.04.2018
33 K.Logesh
VIII /
IV
Experimental and theoretical
investigation on compression
ignition engine emission
characteristics fuelled with diesel
biodiesel blends doped with
copper oxide nano particles
AL-Ameen
Engineering college,
Erode
05.04.2018
34 R.G.Nakul krishna
VIII /
IV
Experimental and theoretical
investigation on compression
ignition engine emission
characteristics fuelled with diesel
biodiesel blends doped with
copper oxide nano particles
AL-Ameen
Engineering college,
Erode
05.04.2018
35 V.Naveen
VIII /
IV
Experimental and theoretical
investigation on compression
ignition engine emission
characteristics fuelled with diesel
biodiesel blends doped with
copper oxide nano particles
AL-Ameen
Engineering college,
Erode
05.04.2018
36 B.Mohan prasath
VIII /
IV
Experimental and theoretical
investigation on compression
ignition engine emission
characteristics fuelled with diesel
biodiesel blends doped with
copper oxide nano particles
AL-Ameen
Engineering college,
Erode
05.04.2018
37 M.Gowtham
VIII /
IV
Water flow automization for
power generation
AL-Ameen
Engineering college,
Erode
05.04.2018
38 P.Aravinth kumar
VIII /
IV
Water flow automization for
power generation
AL-Ameen
Engineering college,
Erode
05.04.2018
39 D.Arul senthur
VIII /
IV
Water flow automization for
power generation
AL-Ameen
Engineering college,
Erode
05.04.2018
40 T.Balaji
VIII /
IV
Water flow automization for
power generation
AL-Ameen
Engineering college,
Erode
05.04.2018
41 R.Gokul kannan
VIII /
IV
Design of heat exchanging in
ammonia water vapour absorption
AC system for a car by waste heat
recovery from engine exhaust gas
AL-Ameen
Engineering college,
Erode
05.04.2018
42 Buvanesh kumar.A
VIII /
IV
Design of heat exchanging in
ammonia water vapour absorption
AC system for a car by waste heat
recovery from engine exhaust gas
AL-Ameen
Engineering college,
Erode
05.04.2018
43 Ganesha moorthi.R
VIII /
IV
Design of heat exchanging in
ammonia water vapour absorption
AC system for a car by waste heat
recovery from engine exhaust gas
AL-Ameen
Engineering college,
Erode
05.04.2018
44 Mohameed
abdulah.N
VIII /
IV
Premixed charge compression
ignition engine using various fuels
AL-Ameen
Engineering college,
Erode
05.04.2018
45 Prakash.N
VIII /
IV
Premixed charge compression
ignition engine using various fuels
AL-Ameen
Engineering college,
Erode
05.04.2018
46 Parvin prabhu.P
VIII /
IV
Premixed charge compression
ignition engine using various fuels
AL-Ameen
Engineering college,
Erode
05.04.2018
47 Dinesh.H
VIII /
IV
Implementing lean approach in
lead-time reduction
AL-Ameen
Engineering college,
Erode
05.04.2018
48 Christon.R
VIII /
IV
Implementing lean approach in
lead-time reduction
AL-Ameen
Engineering college,
Erode
05.04.2018
49 Aravind.D
VIII /
IV
Implementing lean approach in
lead-time reduction
AL-Ameen
Engineering college,
Erode
05.04.2018
50 Gowtham.G
VIII /
IV
Implementing lean approach in
lead-time reduction
AL-Ameen
Engineering college,
Erode
05.04.2018
51 Dhayalan.V
VIII /
IV
Design and fabrication of magneto
rheological fluid braking system
AL-Ameen
Engineering college,
Erode
05.04.2018
52 Dharanidharan.E
VIII /
IV
Design and fabrication of magneto
rheological fluid braking system
AL-Ameen
Engineering college,
Erode
05.04.2018
53 Chinnadurai
rakesh.K
VIII /
IV
Design and fabrication of magneto
rheological fluid braking system
AL-Ameen
Engineering college,
Erode
05.04.2018
54 Jagadeesh S.P
VIII /
IV
Performance and combustion
analysis of lemon grass oil blend
bio-diesel in homogenous charge
combustion ignition (HCCI)
AL-Ameen
Engineering college,
Erode
05.04.2018
55 Gobinath.G
VIII /
IV
Performance and combustion
analysis of lemon grass oil blend
bio-diesel in homogenous charge
combustion ignition (HCCI)
AL-Ameen
Engineering college,
Erode
05.04.2018
56 Jefrin Jose.I
VIII /
IV
Productivity improvement in Elgi
equipment Pvt. Ltd using
systematic layout planning (SLP)
AL-Ameen
Engineering college,
Erode
05.04.2018
57 S.Shine caleb
VIII /
IV
Value stream mapping for lean
manufacturing implementation in
gear box manufacturing industry
Hindustan institute of
Technology,
Coimbatore
22.03.2018
58 K.G.Vidhyasagar
VIII /
IV
Value stream mapping for lean
manufacturing implementation in
gear box manufacturing industry
Hindustan institute of
Technology,
Coimbatore
22.03.2018
59 P.Soundhar
VIII /
IV
Value stream mapping for lean
manufacturing implementation in
gear box manufacturing industry
Hindustan institute of
Technology,
Coimbatore
22.03.2018
60 V.Sreenath
VIII /
IV
Value stream mapping for lean
manufacturing implementation in
gear box manufacturing industry
Hindustan institute of
Technology,
Coimbatore
22.03.2018
61 M.Karthick
VIII /
IV
Mechanical properties of sisal,
kenaf and glass fiber with epoxy
hybrid composites
Hindustan institute of
Technology,
Coimbatore
22.03.2018
62 T.Manivenkatesh
VIII /
IV
Mechanical properties of sisal,
kenaf and glass fiber with epoxy
hybrid composites
Hindustan institute of
Technology,
Coimbatore
22.03.2018
63 M.Karthik
VIII /
IV
Mechanical properties of sisal,
kenaf and glass fiber with epoxy
hybrid composites
Hindustan institute of
Technology,
Coimbatore
22.03.2018
64 S.Logeshwaran
VIII /
IV
Mechanical properties of sisal,
kenaf and glass fiber with epoxy
hybrid composites
Hindustan institute of
Technology,
Coimbatore
22.03.2018
65 K.Ramkumar
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
66 M.Manoj Maniyam
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
67 G.Navaneethan
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
68 V.N.Pravinram
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
69 T.Prince
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
70 S.Jeevanantham
VIII /
IV
Design optimization and analysis
of vortex tube using CFD
Hindustan institute of
Technology,
Coimbatore
22.03.2018
71 M.Kamaraj
VIII /
IV
Investigation of microstructure and
mechanical properties of haste
alloy C2000 with matching filler
wire
Hindustan institute of
Technology,
Coimbatore
22.03.2018
72 A.Pradeep
VIII /
IV
Investigation of microstructure and
mechanical properties of haste
alloy C2000 with matching filler
wire
Hindustan institute of
Technology,
Coimbatore
22.03.2018
73 V.Mageshwaran
VIII /
IV
Investigation of microstructure and
mechanical properties of haste
alloy C2000 with matching filler
wire
Hindustan institute of
Technology,
Coimbatore
22.03.2018
74 Pradeepkumar.M
VIII /
IV
Investigation of microstructure and
mechanical properties of haste
alloy C2000 with matching filler
wire
Hindustan institute of
Technology,
Coimbatore
22.03.2018
75 R.Pravinraj
VIII /
IV
Effect of pulsed current over using
GTAW by conventional method
Hindustan institute of
Technology,
Coimbatore
22.03.2018
76 J.Manoj
VIII /
IV
Effect of pulsed current over using
GTAW by conventional method
Hindustan institute of
Technology,
Coimbatore
22.03.2018
77 R.Nandhakumar
VIII /
IV
Effect of pulsed current over using
GTAW by conventional method
Hindustan institute of
Technology,
Coimbatore
22.03.2018
78 S.Aakash
VIII /
IV
Experimental analysis on a natural
convectional solar water heater
Rathinam Technical
Campus, Coimbatore 14.03.2018
using TiO2 Nano PCM (TNPCM)
as latent heat storage
79 P.Jaisurya
VIII /
IV
Experimental analysis on a natural
convectional solar water heater
using TiO2 Nano PCM (TNPCM)
as latent heat storage
Rathinam Technical
Campus, Coimbatore 14.03.2018
80 S.Balasubramaniyan
VIII /
IV
Experimental analysis on a natural
convectional solar water heater
using TiO2 Nano PCM (TNPCM)
as latent heat storage
Rathinam Technical
Campus, Coimbatore 14.03.2018
81 A.Ajithkumar
VIII /
IV
Experimental analysis on a natural
convectional solar water heater
using TiO2 Nano PCM (TNPCM)
as latent heat storage
Rathinam Technical
Campus, Coimbatore 14.03.2018
82 V.Makesh
VIII /
IV
Investigation on a nano enhanced
phase change material on the roof
of a single story building for space
cooling
Rathinam Technical
Campus, Coimbatore 14.03.2018
83 V.Gowtham srinivas
VIII /
IV
Investigation of solar water heater
using reflectors
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
84 D.Arunraj
VIII /
IV
Investigation of solar water heater
using reflectors
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
85 N.Balaji
VIII /
IV
Investigation of solar water heater
using reflectors
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
86 R.Boopathi Raja
VIII /
IV
Investigation of solar water heater
using reflectors
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
87 M.Jagadish
VIII /
IV
Characterization test on AA2219
Reinforced with tungsten carbide
and graphite
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
88 T.Gopala krishnan
VIII /
IV
Characterization test on AA2219
Reinforced with tungsten carbide
and graphite
Kalaignarkarunanidhi
Institute of
Technology,
Coimbatore
23.04.2018
24.04.2018
89 G.Ilavarasan VIII /
IV
Characterization test on AA2219
Reinforced with tungsten carbide
and graphite
Kalaignarkarunanidhi
Institute of
23.04.2018
24.04.2018
Technology,
Coimbatore
90 A.Arunkumar VIII /
IV
Dry sliding wear behavior of
AA2219 reinforced with
magnesium oxide and graphite
metal matrix composite
K.Ramakrishnan
college of
Technology, Trichy
23.04.2018
24.04.2018
91 R.Kamalakannan VIII /
IV
Dry sliding wear behavior of
AA2219 reinforced with
magnesium oxide and graphite
metal matrix composite
K.Ramakrishnan
college of
Technology, Trichy
23.04.2018
24.04.2018
92 T.Abinesh VIII /
IV
Dry sliding wear behavior of
AA2219 reinforced with
magnesium oxide and graphite
metal matrix composite
K.Ramakrishnan
college of
Technology, Trichy
23.04.2018
24.04.2018
93 E.Nandhakumar VIII /
IV
Consolidation and characterization
of copper alumina composite
through powder metallurgy
K.Ramakrishnan
college of
Technology, Trichy
23.04.2018
24.04.2018
94 E.Krishnaram VIII /
IV
Consolidation and characterization
of copper alumina composite
through powder metallurgy
K.Ramakrishnan
college of
Technology, Trichy
23.04.2018
24.04.2018
95 Aravindhan D VIII /
IV
Fabrication and analysis of impact
multiwrench
Sri Krishna college of
Technology,
Coimbatore
22.03.2018
23.03.2018
96 Gowri Shankar.R VIII /
IV
Fabrication and analysis of impact
multiwrench
Sri Krishna college of
Technology,
Coimbatore
22.03.2018
23.03.2018
97 Athif Batcha.M VIII /
IV
Fabrication and analysis of impact
multiwrench
Sri Krishna college of
Technology,
Coimbatore
22.03.2018
23.03.2018
98 Deepak.V VIII /
IV
Fabrication and analysis of impact
multiwrench
Sri Krishna college of
Technology,
Coimbatore
22.03.2018
23.03.2018
99 Gowtham.G VIII /
IV
Implementing lean approach in
lead reduction time
Nandha College of
Technology, Erode 22.03.2018
100 Christon.R VIII /
IV
Implementing lean approach in
lead reduction time
Nandha College of
Technology, Erode 22.03.2018
101 Dinesh.M VIII /
IV
Implementing lean approach in
lead reduction time
Nandha College of
Technology, Erode 22.03.2018
102 Krishna Prasad.S VIII /
IV
A Comparative investigation and
optimization on characteristics of
Sriguru Institute of
Technology,
Coimbatore
23.03.2018
pineapple/ramie fiber reinforced
hybrid composite
103 Mohan Raj.N VIII /
IV
A Comparative investigation and
optimization on characteristics of
pineapple/ramie fiber reinforced
hybrid composite
Sriguru Institute of
Technology,
Coimbatore
23.03.2018
104 Madhan kumar.A VIII /
IV
A Comparative investigation and
optimization on characteristics of
pineapple/ramie fiber reinforced
hybrid composite
Sriguru Institute of
Technology,
Coimbatore
23.03.2018
105 Krishna prasath.D VIII /
IV
A Comparative investigation and
optimization on characteristics of
pineapple/ramie fiber reinforced
hybrid composite
Sriguru Institute of
Technology,
Coimbatore
23.03.2018
106 R.Sathish VIII /
IV
Design and analysis of automatic
turmeric planting machine
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
107 B.Parthiban VIII /
IV
Design and analysis of automatic
turmeric planting machine
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
108 M.Vijayakumar VIII /
IV
Design and analysis of automatic
turmeric planting machine
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
109 R.Rooban VIII /
IV
Experimental analysis of micro
channel heat sink
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
110 D.Sabarinathan VIII /
IV
Experimental analysis of micro
channel heat sink
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
111 M.Sakthi Arjun
Kumar VIII /
IV
Experimental analysis of micro
channel heat sink
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
112 V.Vigneshwaran VIII /
IV
Experimental analysis of micro
channel heat sink
Muthayammal
Engineering College,
Rasipuram.
30.03.2018
31.03.2018
113 M.Nagaraj VIII /
IV
In Ball bearing with acoustic study
of solid contamination emission
Erode Sengunthar
Engineering College,
Erode.
05.04.2018
06.04.2018
114 Manikandan M VIII /
IV Advances in Energy Research IIT, Bombay
12.12.2017
13.12.2017
14.12.2017
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL SYMPOSIUMS –PAPER PRESENTATION
Sl.
No. Students Name Sem/Year Place Date Prize
1 Pranav. A IV / II
PSG Institute of Technology
and Applied Research,
Coimbatore
09.03.2018
2017 - 2018
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL SYMPOSIUMS –PAPER PRESENTATION
Sl.
No. Students Name Sem/Year Place Date Prize
1 K. Praveen Kumar VI / III IIT Hyderabad
09.02.2018
10.02.2018
11.02.2018 II
2 V. Praveen VI / III IIT Hyderabad
09.02.2018
10.02.2018
11.02.2018 II
3 S. Pranesh VI / III IIT Hyderabad
09.02.2018
10.02.2018
11.02.2018 II
2017 - 2018
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL SYMPOSIUMS –TECHNICAL EVENTS
Sl.
No. Students Name Sem/Year Events Place Date
1 Aswin V Vijay III / II ICT Academy
Youth Talk 2017
ICT Academy,
Coimbatore 17.08.2017
2 D. Ajay IV / II Engineers world
record attempt
Karpagam college of
Engineering,
Coimbatore
01.02.2018
02.02.2018
03.02.2018
3 Nithish M IV / II Emerging IAS
Aspirants Meet
KPR IAS Academy,
Coimbatore 03.02.2018
2017 - 2018
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL SYMPOSIUMS –TECHNICAL EVENTS
Sl.
No. Students Name Sem/Year Events Place Date PRIZE
1 Aswin V Vijay IV / II Business Plan
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018 II
2 Pazhaniappan Y IV / II Business Plan
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018 II
3 Sakthivel K IV / II Sheet Metal
Design
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018 I
4 Sakthivel K IV / II Metallica
Megamind
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018 I
2017 - 2018
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY
STUDENTS PARTICIPATION AT NATIONAL SYMPOSIUMS –WORKSHOPS &
SEMINARS
Sl.
No. Students Name Sem/Year Topic
Name of the
organization/Institute Date
1 Hari Prashanth R III / II
Workshop on
Performance tuning,
Hybrid concepts and
Safety aspects
Coimbatore Institute of
Technology,
Coimbatore
23.08.2017
2 G Jaya Surya III / II
Workshop on
Performance tuning,
Hybrid concepts and
Safety aspects
Coimbatore Institute of
Technology,
Coimbatore
23.08.2017
3 Nithish M III / II International Workshop
on Internet of Things
Coimbatore Institute of
Technology,
Coimbatore
27.08.2017
4 Aswin V Vijay III / II Workshop on 3D
scanning and printing
Bannari Amman
Institute of Technology,
Erode
09.09.2017
10.09.2017
11.09.2017
5 Pazhaniappan Y III / II Workshop on 3D
scanning and printing
Bannari Amman
Institute of Technology,
Erode
09.09.2017
10.09.2017
11.09.2017
6 Karthi L III / II
Workshop on
Dismantling and
Assembling of IC
Engines
Sri Krishna College of
Engineering and
Technology,
Coimbatore
15.09.2017
7 Hari Prashanth R III / II
Workshop on
Dismantling and
Assembling of IC
Engines
Sri Krishna College of
Engineering and
Technology,
Coimbatore
15.09.2017
8 G Jaya Surya III / II Workshop on
Dismantling and
Sri Krishna College of
Engineering and 15.09.2017
2017 - 2018
Assembling of IC
Engines
Technology,
Coimbatore
9 M Mohanraj III / II
Workshop on
Dismantling and
Assembling of IC
Engines
Sri Krishna College of
Engineering and
Technology,
Coimbatore
15.09.2017
10 Aswin V Vijay IV / II
Workshop on
Automobile & Engine
Mechanics
IIT Madras
(Saarang 2018)
09.01.2018
&
10.01.2018
11 Dhinesh V IV / II
Workshop on
Automobile & Engine
Mechanics
IIT Madras
(Saarang 2018)
09.01.2018
&
10.01.2018
12 Sakthivel K IV / II
Workshop on
Computational Fluid
Dynamics
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018
13 Surya J IV / II
Workshop on
Computational Fluid
Dynamics
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018
14 Gowtham B IV / II
Workshop on
Computational Fluid
Dynamics
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018
15 D.I. Saravana kumar IV / II
Workshop on
Computational Fluid
Dynamics
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018
16 Sandhosh M IV / II
Workshop on
Computational Fluid
Dynamics
SNS College of
Engineering,
Coimbatore
31.01.2018
01.02.2018
17 Elango S IV / II Workshop on IC Engine
PSG Institute of
Technology and Applied
Research
09.03.2018
18 Ashif IV / II Workshop on IC Engine
PSG Institute of
Technology and Applied
Research
09.03.2018
19 Dinesh kumar S IV / II Workshop on IC Engine
PSG Institute of
Technology and Applied
Research
09.03.2018
20 Dinesh Raju IV / II Workshop on IC Engine
PSG Institute of
Technology and Applied
Research
09.03.2018
21 Boolenthiran N VI / III
Two Days Hands-on
Training on Engine
Assembly and
Transmission System
Adithya Institute of
Technology,
Coimbatore
09.01.2018
10.01.2018
22 Akash Raj S VI / III
Two Days Hands-on
Training on Engine
Assembly and
Transmission System
Adithya Institute of
Technology,
Coimbatore
09.01.2018
10.01.2018
23 Shanmuga Shankar C VI / III
Workshop on
Dismantling and
Assembling of IC
Engines
Kumaraguru College of
Technology,
Coimbatore
18.02.2018
24 Srinivasan E VI / III
Workshop on
Dismantling and
Assembling of IC
Engines
Kumaraguru College of
Technology,
Coimbatore
18.02.2018
25 Sirinzion C VI / III
Workshop on
Dismantling and
Assembling of IC
Engines
Kumaraguru College of
Technology,
Coimbatore
18.02.2018
26 Pranav. A IV / II
Workshop on “Bike
design and Engine
power technologies” on
Harley Davidson
motorcycles.
Government college of
Technology,
Coimbatore.
17.02.2018
27 R A Nithesh kumar III / II
Training program on IC
Engine and Automobile
prototyping
Skyfi labs center,
Chennai
24-06-2017
to
30-06-2017
28 Praveen Paul Durai M III / II
Training program on IC
Engine and Automobile
prototyping
Skyfi labs center,
Chennai
24-06-2017
to
30-06-2017
29 Nithish M III / II
Training program on IC
Engine and Automobile
prototyping
Skyfi labs center,
Chennai
24-06-2017
to
30-06-2017