2017

QUALITY, CRAFTMANSHIP, AND PERFORMANCE DEFINED

STEEL CUT-ON-CONTACT TIPThe tip is reinforced by the Penetrator blade, which supports the main blade for superior strength.

SAMAURAI-STYLE S30V STAINLESS STEEL CURVED BLADESImproves the ability to cut by constantly changing the slicing angle.

PENETRATOR (BLEEDER) BLADE BORES CHANNELSolid Broadheads penetrate bone better than any other broadhead.The Penetrator blade creates a hole just large enough for the arrow shaft to go through, which reduces friction.

20° BLADE ANGLEThe optimum angle for maximum cutting ability.

BEYOND RAZOR SHARPThe blades on a Solid Broadhead are all leather-stropped before leaving the factory. This removes all burrs and makes an already sharp broadhed even sharper. And they stay sharp, even after going through bone!

ZERO TAPERED FERRULE Tapers down to almost nothing, allowing air to slide over without disruption for more accurate and quiet flight.

1/2” BLEEDER 4.80” TOTAL CUTTING EDGES

3/4” BLEEDER 5.32” TOTAL CUTTING EDGES

Special purpose auxiliary bleeder blades. 1/2” penetrator for bone blasting -or- 3/4” vented for EXTREME blood letting.• ALL STEEL CUT-ON-CONTACT TIP• SAMURAI-STYLE CURVED BLADES• 20° BLADE ANGLE• .060” THICK S30V STAINLESS

STEEL BLADES• ZERO-TAPERED FERRULE• AVAILABLE IN STANDARD OR

DEEP SIX FERRULES

AVAILABLE:

1/2” BLEEDER 5.60” TOTAL CUTTING EDGES

3/4” BLEEDER 6.12” TOTAL CUTTING EDGES

Sometimes bigger is just better. More cutting edge surface and increased F.O.C.• ALL STEEL CUT-ON-CONTACT TIP• SAMURAI-STYLE CURVED BLADES• 20° BLADE ANGLE• .060” THICK S30V STAINLESS

STEEL BLADES• ZERO-TAPERED FERRULE• AVAILABLE IN STANDARD OR

DEEP SIX FERRULES

1/2” BLEEDER 5.60” TOTAL CUTTING EDGES

3/4” BLEEDER 6.12” TOTAL CUTTING EDGES

Let’s face it, a bow and arrow is not a rifle, it’s actually much more, but only if you have a Legend DG broadhead on the end of your arrow. The Legend DG is made to take on dangerous game and come out on top.• ALL STEEL CUT-ON-CONTACT TIP• SAMURAI-STYLE CURVED BLADES• .060” THICK S30V STAINLESS

STEEL BLADES• ZERO-TAPERED FERRULE• AVAILABLE IN STANDARD OR

DEEP SIX FERRULES

100% STAINLESS STEEL

5.1” TOTAL CUTTING EDGE

Ethical bowhunters know the right way to hunt turkey is to shoot a Solid D-CAP and aim for the head and neck. No more fly-aways. No more wounded birds. Solid D-CAPs fly like darts. They’re razor sharp, crazy durable and the .060” thick S30V stainless steel blades mean if you touch a turkey’s head – it’s off.• SINGLE-BEVEL SHARPENED EDGE FOR

INCREASED STRENGTH THROUGH BONE• .060” THICK STAINLESS STEEL BLADES• ZERO-TAPERED FERRULE• DESIGNED TO WITHSTAND MULTIPLE

TURKEY HEADSHOTS

1.855.802.0866 solid-broadheads.com

LIABILITY DISCLAIMER The Outdoor Group, LLC is not liable for any personal injury, death, or property damage that may result from your use of this product. The user of this product assumes all risks of property damage or injury to yourself and others that may arise from its use. Use of this product binds the user to this agreement.

LEGEND 100WITH 1/2”

BLEEDER BLADE

LEGEND 100WITH 3/4”

BLEEDER BLADE

LEGEND 125WITH 1/2”

BLEEDER BLADE

LEGEND 125WITH 3/4”

BLEEDER BLADE

LEGEND DGWITH 1/2”

BLEEDER BLADE

LEGEND DGWITH 3/4”

BLEEDER BLADE

TURKEY D-CAP

WEIGHT(GRAINS) 100 100 125 125 175 175 200

CUTTINGDIAMETER 1 1/8” 1 1/8” 1 3/8” 1 3/8” 1 3/8” 1 3/8” 4”

TOTAL CUTTING EDGES 4.80” 5.32” 5.60” 6.12” 5.60” 6.12” 5.1”

AVAILABLE WITH DEEP SIX FERRULE • • • • • •

S30V .060”STAINLESS STEEL • • • • • •

.060”STAINLESS STEEL •