2016 COURSE SCHEDULE - OSHA Training Institute · 2016 COURSE . SCHEDULE. TRAINING INSTITUTE EDUCATION CENTER Home of the. ia a na i. B. UC San Diego Extension (800) 358-9206 •

Serving Arizona, California, Guam, Hawaii, Nevada, and the Pacific Territories

Highlights

n New San Diego Course Location

n Learn How to Become an Outreach Trainer

n Bring UCSD Safety Courses to Your Workplace

(800) 358-9206 • osha.ucsd.edu

Occupational Safety and Health Department

2016 COURSE SCHEDULE

TRAINING INSTITUTEEDUCATION CENTERHome of the

California

Nevada

Arizona

Hawaii

B U C S a n D i e g o E x t e n s i o n ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

Enrollments are only processed at our San Diego locations, online at osha.ucsd.edu or by calling (800) 358-9206; enrollments not available at any other locations. Please verify course locations in the catalog or online at osha.ucsd.edu.

Reno

Sacramento

Las Vegas

Henderson

Honolulu ClaremontLos Angeles

Anaheim

San Diego Phoenix

Tucson

UCSD’s OSHA Training Institute Education Center Host Site Locations

Arizona

Phoenix/TempeArizona Safety Education Center201 East Southern Avenue, Ste 204Tempe, AZ 85282-5178

AnaheimBrookhurst Community Center2271 W. Crescent AvenueAnaheim, CA 92801

TucsonArizona Dept. of OccupationalSafety & Health (ADOSH)2675 East Broadway BoulevardTucson, AZ 85719

California

TRAINING INSTITUTEEDUCATION CENTER

Cour

se L

ocat

ions

BakersfieldNew Location coming Soon.Visit osha.ucsd.edu/Bakersfield for more information.

( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u 1

UCSD’s OSHA Training Institute Education Center Host Site Locations

Enrollments are only processed at our San Diego locations, online at osha.ucsd.edu or by calling (800) 358-9206; enrollments not available at any other locations. Please verify course locations in the catalog or online at osha.ucsd.edu.

HendersonNevada OSHA/SCATS1301 N. Green Valley Pkwy, Ste 200Henderson, NV 89074

HonoluluConstruction Training Centerof the Pacific94-487 Akoki StreetWaipahu, HI 96797

SacramentoSacramento Regional Builders Exchange1331 T Street Sacramento, CA 95811

Hawaii

Nevada

California (continued)

RenoAGC Nevada5400 Mill StreetReno, NV 89510

Las VegasAssociated General Contractors150 N. Durango Drive, Ste 100Las Vegas, NV 89145

Los AngelesUCLA School of Public Health 650 Charles E. Young Dr, S.Los Angeles, CA 90095

Course Locations

Los AngelesFigueroa Courtyard261 South Figueroa Los Angeles, CA 90012

California (continued)

San DiegoOSHA Training Institute Education CenterUC San Diego Extension404 Camino del Rio S., Ste 102San Diego, CA 92108Tel: (800) 358-9206 or (619) 260-3070Enrollments Accepted at This Location

Claremont (Los Angeles-Inland Empire)Safety Center109 S. Spring StreetClaremont, CA 91711

San Diego (University City)OSHA Training InstituteEducation CenterUC San Diego Extension6256 Greenwich Dr.San Diego, CA 92122Enrollments Accepted at This Location

2 U C S a n D i e g o E x t e n s i o n ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

TABLE OF CONTENTS

OSHA 5400 - Trainer Course in Occupational Safety and Health Standards for the Maritime Industry . . . . . . . . . . . . . . . 15

OSHA 5402 - Maritime Industry Trainer Update Course . . . . . . . . . . . 15

OSHA 5600 - Disaster Site Worker Trainer Course . . . . . . . . . . . . . . . . . . . . . . . . 15

UCSD Safety Courses

EM385-1-1 40 Hour Safety . . . . . . . . . . . 16Electrical High Voltage Standards

- Federal . . . . . . . . . . . . . . . . . . . . . . 16Electrical High Voltage Standards - State 16Electrical Low Voltage Standards - State . 16Electrical Safety Standards -

NFPA 70E - 2-Day . . . . . . . . . . . . . . . 16Fire and Life Safety . . . . . . . . . . . . . . . . . 16Laws and Regulations . . . . . . . . . . . . . . . 17Safety Inspection Techniques . . . . . . . . . . 17Scaffolding . . . . . . . . . . . . . . . . . . . . . . . . 17Trainer Course - Confined Space . . . . . . . 17Trainer Course - Fall Protection . . . . . . . . 17Trainer Course - Forklift Safety . . . . . . . . 17Trainer Course - Rigging Safety . . . . . . . . 17Trainer Course - Trenching . . . . . . . . . . . . 17

Instructors . . . . . . . . . . . . . . . . . . . . . .18

At-A-Glance (by Date) . . . . . . . . . . . . .19

At-A-Glance (by Location) . . . . . . . . . .24

Enrollment Form . . . . . . . . . . . . . . . . .33

OSHA 510 - Occupational Safety and Health Standards for the Construction Industry . . . . . . . . . . . . 12

OSHA 511 - Occupational Safety and Health Standards for General Industry . . . . . . . . . . . . . . . . . . . . . . . 12

OSHA 521 - OSHA Guide to Industrial Hygiene . . . . . . . . . . . . . . . . . . . . . . . 12

OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry . . . . . . . . . . . . . . . . . . . . . . . 12

OSHA 5810 - Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production . . . . . . . . 13

OSHA 6000 - Collateral Duty Course for Other Federal Employees . . . . . . . . . . 13

OSHA 7115 - Lockout/Tagout . . . . . . . . . 13OSHA 7205 - Health Hazard Awareness . 13OSHA 7405 - Fall Hazard Awareness

for the Construction Industry . . . . . . 13OSHA 7500 - Introduction to Safety and

Health Management . . . . . . . . . . . . . 13OSHA 7505 - Introduction to Incident

(Accident) Investigation . . . . . . . . . . 13OSHA 7845 - Recordkeeping

Rule Seminar . . . . . . . . . . . . . . . . . . . 13

OTIEC Trainer Courses

OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry . . . . . . . . . . . . 14

OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry . . . . . . . . . . . . . . . . . . . . . . . 14

OSHA 502 - Update for Construction Industry Outreach Trainers . . . . . . . . 15

OSHA 503 - Update for General Industry Outreach Trainers . . . . . . . . 15

Course Locations . . . . . . . . . . . . . . . . B-1

General Information . . . . . . . . . . . . . . .3

Outreach Trainer Info . . . . . . . . . . . . . .4

Contract Courses . . . . . . . . . . . . . . . . . .5

Certificate Programs . . . . . . . . . . . . . 6-9

Cal/OSHA Safety Courses

OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers . . . . . . . . . . . . . . . . . . . . . . . 10

OSHA 5039 - Cal/OSHA Updatefor General Industry Trainers . . . . . . . . . . 10OSHA 5109 - Cal/OSHA Standardsfor the Construction Industry . . . . . . . . . . 10OSHA 5119 - Cal/OSHA Standards for

General Industry . . . . . . . . . . . . . . . . 10

OTIEC Safety Courses

OSHA 2015 - Hazardous Materials . . . . . 11OSHA 2045 - Machinery and Machine

Guarding Standards . . . . . . . . . . . . . 11OSHA 2055 - Cranes in Construction . . . . 11OSHA 2225 - Respiratory Protection . . . . 11OSHA 2255 - Principles of Ergonomics . . 11OSHA 2264 - Permit-Required Confined

Space Entry . . . . . . . . . . . . . . . . . . . . 11OSHA 3015 - Excavation, Trenching

and Soil Mechanics . . . . . . . . . . . . . . 11OSHA 3095 - Electrical Standards

(Low Voltage - Federal) . . . . . . . . . . . 11OSHA 3115 - Fall Protection . . . . . . . . . . 12

3 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

My ExtensionAccess Your Student Records• Enroll in classes• View and/or print your enrollment

receipts• Update your personal contact

information• View your academic history• Download official transcript form• Review and print grades• Request copies of course descrip-

tions and tuition receiptsLog On: Three Easy Steps1. Visit My Extension at myextension.

ucsd.edu (do not use www)2. Enter your user name (email

address, not Social Security number)3. Enter password. (If you do not

know your password, click on “Forgot your password?” to create a new one).

If you need any assistance with this process, call (858) 534-3400.

2016 Course DiscountsA 10% course discount is available to several organizations’ members, state and Federal employees. More information can be found on osha.ucsd.edu.

Hotel AccommodationsReduced room rates are often available for students. Hotel information can be found on our website osha.ucsd.edu.

On-site Training All courses in this catalog, and many others, can be customized and taught at your work place. Please call (858) 534-9272 to schedule training at your location. For groups of 10 or more, this can often be a more cost effective manner to deliver needed training.

Refund Policy • Cancellations must be made at

least two weeks prior to the course start date to be eligible for a refund.

• Transfer requests prior to two weeks will be honored.

• Transfers within the two weeks prior to the course start date will be allowable one time only.

• Students who do not show up for class and do not call will not be refunded or transferred to another section.

Travel Disclaimer

All travel plans must accommodate the published course end time.

EnrollmentYou can enroll online or via mail, phone or fax. Many courses have new Federal OSHA pre-requisites. Please see individ-ual course description prior to enrolling.

• Online enrollment, visit: osha.ucsd.edu Click the “Enroll Now” button on the course description page.

• Phone enrollment call: (800) 358-9206

• Fax enrollment form to: (619) 294-3861

• Mail enrollment form to: OSHA Training Institute UC San Diego Extension 404 Camino del Rio South, Suite 102 San Diego, CA 92108

UCSD Extension reserves the right to cancel a class two weeks prior to the start date. In the event of a cancelled course, the student will be notified and given the option to transfer to another section or receive a full refund.

General Information

• ABIH Credit: The American Board of Industrial Hygiene offers Certification Maintenance (CM) points for specific courses which have been registered.

• BCSP Credit: The Board of Certified Safety Professionals offers Continuance of Certification (COC) points.

• BRN Credit: The Bureau of Registered Nurses offers BRN credit. Reference UCSD Provider Number 00058.

Course Credit

All of the Occupational Health and Safety Department courses at UC San Diego Extension, including the OSHA Training Institute Education Center courses, offer several types of academic and industry credits. The following is the general key for calculating credits:

Credit type

Half day course

One day course

Two day course

Three day course

Four day course

Five day course

CEU 0.4 0.8 1.6 2.4 3.2 4.0

Academic credit 0.4 0.5 1.5 2.5 3.0 4.0

ABIH (CM points) 0.67 1.33 2.67 4.0 5.34 6.68

BCSP (COCs) 0.4 .8 1.6 2.4 3.2 4.0

Occupational Safety & Health Department

General Inform

ation


UC San Diego OTIEC’s Outreach Trainers

Outreach Reporting Tool

The UC San Diego OSHA Training Institute Education Center developed a web based online Submission Tool for our Outreach Trainers.

This advanced system allows for trainers to submit course documentation electronically and receive cards in a timely and efficient manner, avoiding any unnecessary delays. Often times, card processing takes 24-72 hours—not the customary 30 days.

Additionally, our system provides a database for trainers to access all student and card information in real time significantly cutting down time to find student records and process replacement cards when needed.

We strive to be the gold standard in Outreach and continue to partner with our trainers to ensure that they are equipped with all the necessary tools to make them successful.

Visit osha.ucsd.edu/outreach

UCSD

UC San Diego Safety Trainer Newsletter

This newsletter has been designed for the UCSD OTIEC Outreach Trainers. It provides News, Resources,

Tools and Updates related to construction, general industry, maritime, Cal/OSHA, disaster site and international

training. Don’t miss out, sign up now!

Visit osha.ucsd.edu/newsletter for more information.

Outreach Trainer Info

UCSD OTIEC’s Outreach Department is committed to providing friendly, efficient and speedy service to our thousands of trainers. We have dedicated Outreach staff members, a robust and always improving online reporting tool and are available to answer questions via phone and email.

Outreach comments and questions should be directed to dedicated staff members at [email protected] and/or 858-534-9283.

We are diligently working towards making UCSD the premier OTIEC for Outreach trainers to maintain their affiliation and card processing. We value your opinions and appreciate the continual feedback regarding our new online system. Thank you for your continued support of our safety and outreach programs.

Out

reac

h Tr

aine

rs

To become a UCSD OSHA-authorized outreach trainer or to maintain your trainer status for Construction, General Industry, Maritime, Disaster Site or Cal/OSHA, follow these easy steps:

Step 1: Download the Prerequisite Verification of Eligibility Form by clicking on “Apply Now” on the relevant trainer course page (500, 501, 502, 503, 5400, 5600, 5029, and 5039). You may also email [email protected] for an electronic copy. Fill out the required information on the form.

Step 2: Email the completed form along with a copy of your trainer card or course completion certificate to [email protected]. Please note that your verification form cannot be processed without proper proof of the required prerequisites.

Step 3: Once you have received an approval email from the OH&S department, you will then follow the instructions to enroll in the class of your choice.

Be an OSHA-Authorized Outreach Trainer!

5 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

Contract Courses

All of the courses offered at the UC San Diego Extension Occupational Safety and Health Department and UCSD OSHA Training Institute Education Center can be brought to your site. In addition, there are many awareness courses that are specifically designed for onsite training. These can be scheduled together to make a customized “Workshop Week” for your employees.

Contract Only Courses


• OSHA 7000 – Training Guidelines for Safe Patient Handling• OSHA 7100 – Introduction to Machinery and Machine Safeguarding• OSHA 7105 – Evacuation and Emergency Planning• OSHA 7120 – Introduction to Combustible Dust Hazards• OSHA 7125 – Seminar on Combustible Dust Hazards• OSHA 7200 – Bloodborne Pathogens Exposure Control

for Healthcare Facilities• OSHA 7210 – Pandemic Influenza Preparedness• OSHA 7225 – Transitioning to Safer Chemicals (Coming Soon)• OSHA 7300 – Understanding OSHA’s Permit Required

Confined Space Standard• OSHA 7400 – Noise Hazards in the Construction Industry• OSHA 7410 – Managing Excavation Hazards• OSHA 7415 – Construction Industry Hazards and Prevention Strategies• OSHA 7510 – Introduction to OSHA/or Small Businesses

Utility, Government and Business Customers As today’s businesses are faced with changing technologies, stricter regulations, and increas-ing demands on their time, today’s safety professionals need training resources to protect the bottom line with proven training results.

Customized Training ProgramsOur expert instructors specialize in designing customized training programs tailored to meet your unique business needs that ensure cost-effective solutions and enable sustainable business practices. Our courses are aligned with your mis-sion, values and strategic goals.

ONSITE SAFETY TRAINING

International OperationsWith the universal global economy, businesses with overseas opera-tions must prove their commitment to safety training and ensure a healthy workplace environment for their employees and customers. Our curriculum helps your organi-zation to identify and avoid pre-ventable business impacts.

Exceptional Customer ServiceUCSD’s OSHA Training Institute Education Center is committed to developing lasting relation-ships with each client by providing superior customer service based on quality, integrity and trust. To obtain pricing on contracts, please call (800) 534-9272 and ask for a contract specialist or email [email protected].


Cert

ifica

te P

rogr

ams

UC San Diego Occupational Safety and Health Department Certificate Programs

VA BENEFITSEligible students may utilize their VA educational benefits for the approved Professional Certificate in Occupational Safety and Health and the Safety Specialist certificate program. Veterans, veteran dependents, and others eligible for veterans’ education programs should determine their benefits and obtain authoriza-tion with the Department of VA prior to enrolling in courses.Veterans are encouraged to contact [email protected] with any additional questions.

Regardless of your educational background, UCSD Certificate Programs provide both experienced and newer safety professionals important workplace knowledge and practical experience regarding safety and safety standards. Benefits include:

• Practical application of OSHA regulations in your workplace

• Networking with other professionals

• Access to the most current information• Justification for advancement or promotion• Opportunities for new jobs or careers

CERTIFICATE PROGRAM BENEFITS

CERTIFICATE PROGRAM FINANCIAL ASSISTANCEUC San Diego Extension’s Occupational Safety and Health Department is pleased to provide information regarding financing your continuing education needs. Paying for a certificate program should not be an obstacle in furthering your education. Private Student loans are available to assist students with the cost of enrollment fees, certificate fees, and required textbooks. For more information on loans and other financial resources available (including San Diego Workforce Partnership funds), please visit extension.ucsd.edu/financial.

CERTIFICATES AT A GLANCE

The Safety Leader (5+ years exp.)

The Safety Student (1-5 years exp.)

The Safety Rookie (0-1 years exp.)

Internship & Leadership Skills

Construction Track

General Industry Track

Professional Certificate

in Occupational Safety

and Health✔ ✔ ✔

Safety Specialist Certificate

✔ ✔ ✔Public Sector Safety & Health Fundamentals Certificate Program ✔ ✔ ✔ ✔ ✔

7 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

Certificate Programs


PROFESSIONAL CERTIFICATE IN OCCUPATIONAL SAFETY AND HEALTH

This Professional Certificate provides both experienced and newer safety professionals important workplace knowl-edge and practical experience regarding safety and safety standards. This program offers concentrated study in areas directly applicable to many jobs and can add breadth and depth to existing knowledge and skills.

This program requires the completion of either the OSHA 500 – Trainer Course in OS&H Standards for the Construction Industry or OSHA 501 – Trainer Course in OS&H Standards for General Industry. The required pre-requisite to these courses are the OSHA 510 – OS&H Standards for the Construction Industry or OSHA 511 – OS&H Standards for General Industry. In addition to the required course, students must have a minimum of 5 years in occupational health and safety job experience (within either construction or general industry). The recommended beginning courses are the OSHA 510 or OSHA 511.

Students have five years to complete the required courses from the date of their certificate registration.

THE PROFESSIONAL CERTIFICATE IS AVAILABLE IN CONSTRUCTION, GENERAL INDUSTRY OR A DUAL AREA OF SPECIALIZATION.

Required for the General Industry TrackCourse Title Units

OSHA 3095 Electrical Low Voltage Standards - Federal 3.0OSHA 2255 Principles of Ergonomics 3.0OSHA 521 Industrial Hygiene 3.0OSHA 2045 Machine Guarding 3.0OSHA 511 OSHA Standards for General Industry 3.0OSHA 2225 Respiratory Protection 3.0OSHA 501 Trainer Course for General Industry 3.0Electives 3.0

(TOTAL REQUIRED CREDITS) 24.0

Required for the Construction TrackCourse Title Units

OSHA 3095 Electrical Low Voltage Standards - Federal 3.0OSHA 3115 Fall Protection 3.0OSHA 521 Industrial Hygiene 3.0OSHA 510 OSHA Standards for the Construction Industry 3.0UCSD 3200 Scaffolding 2.5OSHA 500 Trainer Course for the Construction Industry 3.0OSHA 3015 Trenching & Excavation 2.5Electives 4.0

(TOTAL REQUIRED CREDITS) 24.0

1. Visit osha.ucsd.edu

2. On the “Professional Certificate in Occupational Safety and Health” page, click on “Apply Now”

3. Login to your “My Extension” account (or follow the prompts to create a new one)

4. Once logged in, follow the instructions and pay the $60 certifi-cate fee to complete the process. There is no application fee.

How to enroll

• Target Audience: Individuals with 5+ years of experience in occupational safety and health. This applies to both the Public and Private Sectors.

• Location of Courses: Courses in the program are offered throughout all UCSD OTIEC locations

• Certificate Design: This is a University of California, San Diego program

• Required Courses: a minimum of 7 courses are required

• Total Units: 24 units are required to complete the certificate, 35 units for the dual certificate

Dual Certificate

A dual certificate in both Construction and General Industry is earned by taking all required courses in both tracks. Thirty-five (35) units total with no additional electives required. Students enrolled in the dual certificate are only required to take one of the two trainer courses, OSHA 500 or OSHA 501. If students choose not to take the other Trainer Course, they must instead take 3 other units as electives to reach the required 35 units in the Dual Certificate. Elective units must be chosen from the UCSD OSHA Training Institute Education Center catalog from courses taken for credit.



SAFETY SPECIALIST CERTIFICATE

According to recent data, the number of occupational safety and health jobs will outpace the num-ber of trained professionals to fill them. This shortage requires employees skilled in a variety of safety topics.

The Safety Specialist Certificate was designed by UC San Diego Extension and the Associated Builders and Contractors (ABC) San Diego Chapter and is an intensive, cohort-based program that combines in-class educa-tion with associated skills practice. Included in the certificate program topics are all items necessary for indi-viduals to prepare for entry-level safety jobs in the construction industry, including an on-the-job internship.

Specific careers program graduates will be competitive for include: • Field Safety Supervisor • Safety Officer • Safety Specialist • Occupational Health and Safety Specialists• Safety Coordinator

Certificate Course Matrix Required Certificate Courses (Must be taken as a cohort; no individual enrollments)

Course Title Units

Module 1 Introduction to Safety 8

Module 2 Regulation Fundamentals for Safety 7

Module 3 Safety Practices 12

Module 4 U.S. Army Corp of Engineers Safety and Health 4

Module 5 Job Internship 0

Module 6 Intensive Leadership Training 0

• Target Audience: Individuals with 0-5 years of expe-rience in occupational safety and health. This applies to both the Public and Private Sectors.

• Location of Courses: Modules/classes in the program are located at UC San Diego Extension’s University City Center

• Certificate Design: This is a University of California, San Diego program

• Required Courses: all of the six intensive modules are required

• Total Units: 31 units are required to complete the certificate

The on-the-job portion of the Safety Specialist Certificate Program, Module 5 consists of a 3-week (120 hours) internship and a workplace project providing students the opportunity to apply their newfound knowledge and skills in a variety of real-world settings within an existing and fully operational local company.

Workplace Internship students will be matched with an experienced safety profes-sional to help guide and achieve goals that draw on core construction, safety, health, environmental and business skills.

Students will operate under company super-vision and deliver project activities requiring varied safety, health, and environmental knowledge as well as interpersonal skills. Responsibilities may include site reviews, identifying health concerns, Hazard Analysis and worker training activities.

1. Visit osha.ucsd.edu

2. On the “Safety Specialist Certificate” page, click on “Apply Now”

3. Login to your “My Extension” account (or follow the prompts to create a new one)

4. Complete the application in its entirety

5. This program requires an application review by the Advisory Committee. You will be contacted about your application and will not automatically be enrolled in the program.

Cert

ifica

te P

rogr

ams

About the Job Internship

How to Enroll

9 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u


PUBLIC SECTOR SAFETY & HEALTH FUNDAMENTALS CERTIFICATE PROGRAM

The certificate program in Public Sector Safety & Health Fundamentals supports OSHA’s mission by train-ing public sector employees in occupational safety and health to reduce incident rates for workers in state and local governments (the certificate program is highly applicable to private industry workers as well). Participants have the opportunity to earn certificates for Construction and General Industry training.

Participants must complete a minimum of seven OTI Education Center courses (minimum of 68 contact hours) to earn the certificate in either Construction or General Industry.

ConstructionRequired Certificate Courses

Course Title Min . Contact Hours

OSHA 510 Occupational Safety and Health Standards for Construction 26OSHA 7500 Introduction to Safety and Health Management 5.5OSHA 7505 Introduction to Accident Investigation 7.5

(TOTAL HOURS) 39.0

Elective Courses for Construction Industry


OSHA 7410 Managing Excavation Hazards 6.5 OROSHA 3015 Excavation, Trenching and Soil Mechanics 20OSHA 3095 Electrical Standards 26OSHA 7405 Fall Hazard Awareness for the Construction Industry 5 OROSHA 3115 Fall Protection 18OSHA 7105 Evacuation and Emergency Planning 4OSHA 7110 Safe Bolting: Principles and Practices 7OSHA 7205 Health Hazard Awareness 6OSHA 7400 Noise in the Construction Industry 5.5OSHA 7845 Recordkeeping Rule Seminar 4

General IndustryRequired Certificate Courses


OSHA 511 Occupational Safety and Health Standards for General Industry 26OSHA 7500 Introduction to Safety and Health Management 5.5OSHA 7505 Introduction to Accident Investigation 7.5

(TOTAL HOURS) 39.0

Elective Courses for General Industry

Course Title Min . Contact HoursOSHA 3095 Electrical Standards 26OSHA 7300 OSHA’s Permit-Required Confined Space Entry 7 OROSHA 2264 Permit-Required Confined Space Standard 20OSHA 7000 OSHA Training Guidelines for Safe Patient Handling 7.5OSHA 7005 Public Warehousing and Storage 7OSHA 7100 Introduction to Machinery and Machine Safeguarding 4 OROSHA 2045 Machinery & Machine Guarding Standards 26OSHA 7105 Evacuation and Emergency Planning 4OSHA 7115 Lockout/Tagout 7.5OSHA 7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities 7OSHA 7205 Health Hazard Awareness 6OSHA 7210 Pandemic Influenza Preparedness 5.5OSHA 7845 Recordkeeping Rule Seminar 4


• Target Audience: Those new to safety in both the Public and Private Sectors

• Location of Courses: Courses in the program are offered throughout all UCSD OTIEC locations

• Certificate Design: This certificate supports OSHA’s mission to reduce incident rates for workers

• Required Courses: a minimum of 3 total courses are required per specialization

• Total Hours: a minimum of 68 instruction hours are required to complete each program specialization (construction or general industry).

1. Review the certificate requirements to determine the appropriate program (construction or general industry)

2. Find and register for courses at osha.ucsd.edu

3. Upon completion of all courses, submit completed application to [email protected] (application available on “Public Sector Safety & Health Fundamentals Certificate Program” page or by emailing [email protected])

4. Submit the $90 fee to receive your certificate

How to enroll

Note: Important—Students taking this course who want to receive the Cal/OSHA Outreach Trainer designation must meet the following required prerequisites: OSHA 501 or 503 (must be a current trainer), One year of Cal/OSHA general industry safety experience, OSHA 501 card must be brought to classThe Cal/OSHA Partnership authorized Outreach Trainers will have their Federal Outreach Trainer cards affixed with a “Cal/OSHA Partnership Trainer sticker.” Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 25-28 Claremont 111911 Apr 25-28 San Diego 110946 May 23-26 Los Angeles 112134Jun 20-23 Bakersfield 112263 Aug 1-4 San Diego 110983 Nov 7-10 Sacramento 111983 Nov 14-17 Anaheim 112153

Cal/OSHA Courses

OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach TrainersThis one day course updates the OSHA 5109 with new and current Cal/OSHA standards and continues the student’s authorization to teach both 10 and 30 hour Cal/OSHA Outreach Program.

Note: Required prerequisite: OSHA 5109 or OSHA 5029 within four years. IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 500/OSHA 502 trainer card with Cal/OSHA sticker or Certificates of completion. The Cal/OSHA Partnership autho-rized Outreach Trainers must bring their Federal Outreach Trainer card in order to obtain a “Cal/OSHA Partnership Trainer sticker”. To obtain the Verification of Prerequisite Form please click on “Apply Now” next to a class below.Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 4 Los Angeles 112124 Feb 19 San Diego 110903 Apr 28 Claremont 111937 May 12 Sacramento 111947 Aug 25 San Diego 110992

OSHA 5039 - Cal/OSHA Update for General Industry TrainersThis one day course updates the OSHA 5119 with new and current Cal/OSHA standards and continues the student’s authorization to teach both 10 and 30 hour Cal/OSHA Outreach Program.

Note: Required prerequisite: OSHA 5119 or OSHA 5039 within four years. IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 501/OSHA 503 trainer card with Cal/OSHA sticker or Certificates of completion.The Cal/OSHA Partnership autho-rized Outreach Trainers must bring their Federal Outreach Trainer card in order to obtain a “Cal/OSHA Partnership Trainer sticker”. To obtain the Verification of Prerequisite Form please click on “Apply Now” next to a class below. Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 4 Sacramento 111913 Feb 25 Los Angeles 112127 Mar 4 San Diego 111081 May 19 Claremont 111951 Nov 3 San Diego 111061

OSHA 5109 - Cal/OSHA Standards for the Construction IndustryDeveloped in partnership with Cal/OSHA, this 4-day course emphasizes Title 8 Construction Industry standards and compliance. Topics include IIPP, Ergo, Electrical and many others. The course also provides existing Fed OSHA trainers an endorsement authorizing them to teach 10 & 30 hr Federal- Cal/OSHA outreach courses. Resources and Cal/OSHA training guide-lines will be covered.

Note: Important—Students taking this course who want to receive the Cal/OSHA Outreach Trainer designation must meet the following required prerequisites: OSHA 500 or 502 (must be a current trainer), One year of Cal/OSHA general industry safety experience, OSHA 500 card must be brought to class. The Cal/OSHA Partnership authorized Outreach Trainers will have their Federal Outreach Trainer cards affixed with a “Cal/OSHA Partnership Trainer sticker.” Cal/OSHA Sticker Expiration: These stickers expire on the same date as the Outreach Trainer card to which they are affixed. For additional information, review the Cal/OSHA Partnership Program Description.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 29-Mar 3 San Diego 110906 Apr 4-7 Sacramento 111931 Apr 25-28 Los Angeles 112133 Jun 6-9 Claremont 111954 Aug 15-18 San Diego 110988 Sep 19-22 Bakersfield 111975

OSHA 5119 - Cal/OSHA Standards for General IndustryDeveloped in partnership with Cal/OSHA, this 4-day course emphasizes Title 8 General Industry standards and compliance. Topics include IIPP, Ergo, Electrical and many others. The course also provides existing Fed OSHA trainers an endorsement authorizing them to teach 10 & 30 hr Cal/OSHA outreach courses. Resources and Cal/OSHA training guidelines will be covered.


Cal/

OSH

A S

afet

y Co

urse

s

UCSD OTIEC, Cuyamaca College, and Columbia Southern University have formed an exciting learning partnership paving the way to Degree Completion!

Students may apply UCSD OSHA Education Center courses towards an Associate’s Degree at Cuyamaca College and/or an Associate’s and Bachelor’s Degree at Columbia Southern University. Cuyamaca College courses may be applied to a Bachelor’s and Associate’s Degree at Columbia Southern University, as well as Columbia Southern University courses may be applied to an Associate’s Degree at Cuyamaca College.

For additional information go to osha .ucsd .edu


OSHA 2015 - Hazardous MaterialsLearn how to apply OSHA general industry stan-dards and integrate materials from other safety standards that relate to hazardous materials. Related processes such as spraying and dipping are covered, as well as electrical equipment. Topics include: Flammable Liquids, Hazardous Waste Operations, Confined Space, Compressed Gases, Hazardous Locations.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJun 6-9 San Diego 110958 Jun 27-30 Tempe 112227 Sep 19-22 San Diego 111036Oct 31-Nov 3 Los Angeles 113261

OSHA 2045 - Machinery and Machine Guarding StandardsGet a comprehensive picture of common machin-ery and related safety standards. Learn aspects of machine inspection and hazard abatement. A mock inspection of a local plant provides hands-on experience. Topics Include: Point of Operation, Portable Hand and Powered Tools, Power Presses, Press Brakes, and Lockout/Tagout.

Note: Requires appropriate clothing for field exercise.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 16-19 Tempe 111309 Mar 7-10 San Diego 110910 Jul 11-14 Claremont 111959 Jul 25-28 Tempe 111380 Oct 3-6 San Diego 111052

OSHA 2055 - Cranes in ConstructionThis course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signal-ing, employee qualifications and training, and maintenance, repair, and inspection require-ments. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards.


Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 25-28 Tempe 111295 Aug 29-Sep 1 San Diego 110995

OSHA 2225 - Respiratory ProtectionLearn how to establish, maintain, and monitor a respirator program following the requirements in 29 CFR 1910.134. Discuss the technical aspects for the proper selection and use of respiratory protection. Evaluate compliance with OSHA’s standard by using the compliance directive and the “Small Entity Compliance Guide.” Topics include: Respiratory Protection Program, Fit Testing Demonstration, Selection of Respirators, Maintenance and Care.

Note: It is highly recommended to complete the OSHA 521 course prior to this course.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 25-28 San Diego 110878 Apr 18-21 Tempe 111324 Jul 11-14 Los Angeles 112137 Jul 25-28 San Diego 110979 Aug 15-18 Waipahu 112141 Oct 31-Nov 3 San Diego 111060

OSHA 2255 - Principles of Ergonomics (formerly known as “OSHA 2250”)Get the information you need to combat mus-culoskeletal injuries. Course highlights include industrial case studies covering analysis and design of work stations and equipment, labo-ratory sessions in manual lifting and cover-age of OSHA’s proposed ergonomic protection standard. Topics Include: Repetitive Injuries, Musculoskeletal Disorders, Video Displays, Workstation and Tool Design, and Seating.


Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMar 7-10 Tempe 111317 Apr 11-14 San Diego 110943 Aug 1-4 San Diego 110981 Aug 22-25 Los Angeles 112142 Nov 28-Dec 1 San Diego 111071

OSHA 2264 - Permit-Required Confined Space EntryThe danger of explosion, poisoning, and asphyxi-ation exists every time a worker enters a confined space. Learn the OSHA required confined space entry standard, hazards associated with entry procedures, Personal Protective Equipment, ven-tilation and purging requirements, calculations and techniques, and appropriate atmosphere testing equipment. Course features hands-on training with explosion meters, oxygen meters, and other test equipment.

Fee: $675Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 11-13 Anaheim 112132 Apr 25-27 San Diego 110945 May 23-25 Tempe 111328 Oct 24-26 San Diego 111054

OSHA 3015 - Excavation, Trenching and Soil Mechanics(formerly known as “OSHA 3010”)Construction trenching accidents claim the lives of 40 workers per year. Save lives by learning the OSHA standards and the safety aspects of excavation and trenching. Discover practical soil mechanics and its relationship to the stabil-ity of shored and unshored slopes and walls of excavations. Topics Include: Principles and Applications, Sloping, Benching, and Shoring.


Fee: $675Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 1-3 San Diego 110879 Jun 27-29 Tempe 111376 Jul 25-27 Claremont 111962 Aug 29-31 San Diego 110993 Sep 26-28 Los Angeles 112422 Oct 10-12 Tempe 111392 Nov 7-9 San Diego 111062 Dec 5-7 Waipahu 112155

OSHA 3095 - Electrical Standards (Low Voltage - Federal)Learn OSHA’s standards associated with electri-cal installations and equipment. Gain knowl-edge of single and three phase systems, cord and plug connected and fixed equipment, ground-ing, ground fault circuit interrupters, hazardous locations and safety related work practices. Special emphasis is placed on electrical hazard recognition and OSHA inspection procedures. Topics include: Personal Protective Equipment, Energized Parts, Grounding, Medical Services / First Aid, Hazardous Energy Control.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMar 14-17 San Diego 110912 Apr 25-28 Tempe 112228 Jun 20-23 San Diego 110962 Sep 26-29 San Diego 111049 Nov 7-10 Tempe 111396 Nov 14-17 Las Vegas 111985 Nov 28-Dec 1 Claremont 111987

11 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u



OSHA 521 - OSHA Guide to Industrial HygieneAccording to the Archives of Internal Medicine (AIM), more than 60,300 fatalities result from occupational illnesses annually. Minimize the threat of illnesses by learning industrial hygiene practices and related OSHA regulations and procedures. Learn how to recognize potential health hazards in the workplace and define terms relating to OSHA health requirements. From workshops in health hazard recognition to air contaminant sampling, this course will give you the information you need to combat occu-pational illnesses. Topics include: Respiratory Protection, Hazard Communication, Confined Spaces, Ventilation, and Recordkeeping.

Note recommended prerequisite course: OSHA 510, OSHA 511, OSHA 5109 or OSHA 5119. Requires appropriate clothing for field exercise. It is also highly recommended to bring a calcula-tor to class.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 29-Mar 3 San Diego 110907 Mar 21-24 Los Angeles 112130 Apr 4-7 Tempe 111322 Aug 8-11 San Diego 110985 Nov 7-10 San Diego 111063

OSHA 5410 - Occupational Safety and Health Standards for the Maritime IndustryThis course is the standards for the Maritime Industry. It is also a required Prerequisite for the OSHA 5400 - Trainer Course - Maritime Safety.Given OSHA standards and current industry information, students will be able to demon-strate ability to interpret federal standards for the maritime industry. Students will be able to identify the jurisdictional responsibilities of fed-eral regulatory agencies in maritime industries, andable to identify how the hierarchy of rules applies to maritime industries covered by OSHA, Inspections, Citations, and Enforcement Policies.

Fee: $925Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 8-12 San Diego 110899 May 16-20 San Diego 110955 Oct 24-28 San Diego 111056

Dates Location Section IDJan 11-14 San Diego 110874 Jan 11-14 Tempe 111285 Jan 19-22 Bakersfield 111910 Jan 25-28 Anaheim 112117 Jan 25-28 Waipahu 112116 Feb 8-11 Claremont 111915 Feb 16-19 Sacramento 111916 Feb 22-25 Henderson 111918 Mar 7-10 Tucson 111921 Apr 4-7 San Diego 110939 Apr 11-14 Tempe 111323 May 2-5 Reno 111939 Jul 11-14 San Diego 110968 Jul 18-21 Tempe 111379 Jul 18-21 Bakersfield 111961 Aug 1-4 Las Vegas 111964 Aug 8-11 Claremont 111965 Aug 15-18 Sacramento 111967 Sep 19-22 San Diego 111035 Oct 3-6 Tempe 111391 Oct 24-27 Reno 111981 Nov 14-17 San Diego 111065

OSHA 511 - Occupational Safety and Health Standards for General IndustryFor students wanting to learn the 29 CFR 1910 standards, this course is a must. Learn crucial OSHA policies, procedures, and standards, as well as general industry safety and health prin-ciples as they relate to real world situations. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Topics Include: OSH Act, Safety and Health Management Systems, Personal Protective Equipment, Hazard Communication, and Electrical.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 11-14 San Diego 110875 Feb 8-11 Tempe 111316 Mar 21-24 Claremont 111926 Apr 18-21 Las Vegas 111934 May 2-5 Bakersfield 111940 May 2-5 San Diego 110948 May 16-19 Tempe 111327 Jun 13-16 Tucson 111956 Jun 20-23 Waipahu 112136 Jun 27-30 Sacramento 111958 Jul 18-21 Los Angeles 112138 Jul 25-28 San Diego 110969 Aug 1-4 Tempe 111381 Aug 8-11 Reno 111966 Sep 12-15 Claremont 111973 Sep 19-22 Anaheim 112144 Oct 10-13 Bakersfield 111979 Oct 24-27 San Diego 111055 Nov 14-17 Tempe 111397

OSHA 3115 - Fall Protection(formerly known as “OSHA 3110”)This 4-day course includes: encounter state-of-the-art technology for fall protection and current OSHA requirements. Topics include the principles of fall protection, the components of fall arrest systems, the limitations of fall arrest equipment, and OSHA policies regarding fall protections. Course features a one-day field exercise demonstrating fall protection equip-ment. Topics include: Conventional Systems, Body Holding Devices, Anchor Points, Harness, Vertical / Horizontal Traveling Systems.


Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 19-22 Tempe 111289 May 2-5 San Diego 110949 Aug 15-18 San Diego 110989 Sep 26-29 Tempe 111390 Oct 24-26 Claremont 111980 Nov 7-10 Waipahu 112150 Dec 5-8 San Diego 111075

OSHA 510 - Occupational Safety and Health Standards for the Construction IndustryAccording to the Bureau of Labor Statistics, construction was the leading industry for inju-ries. Learn the 29 CFR 1926 standards, as well as construction safety and health principles to help prevent injury. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Topics Include: OSH Act, Safety Programs, Fall Protection, Personal Protective Equipment, Stairs and Ladders.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

OTI

EC S

afet

y Co

urse

s

Course Credit CalculationsUCSD safety and UCSD OTIEC courses offer several types of academic and industry credit . See page 3

Safety Matters Sign-UpDon’t miss out on insights about current events from our instructors, exclusive offers and new courses from UC San Diego’s OSHA Training Institute Education Center . Visit osha .ucsd .edu to sign up .

13 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

OSHA 7205 - Health Hazard AwarenessThis one-day course focuses on recognizing potential health hazards in the workplace, and avoiding, minimizing, controlling or eliminating them whenever possible. Exposure to health hazards continues to be common in spite of advances in control measures and techniques. This course will provide information on health hazards and discuss ways to recognize, evaluate, and control them in the workplace.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJun 20 Tempe 111332

OSHA 7405 - Fall Hazard Awareness for the Construction IndustryIn 2004, the Bureau of Labor Statistics data showed that 36 percent of the 1,224 construc-tion worker fatalities were attributed to falls. Designed for small construction employers and employees, this course is packed with informa-tion on fall hazards at work sites. Providing a focus on falls to a lower level rather than falls from slips and trips, Fall Arrest Awareness teaches you how to control or prevent these hazards whenever possible. Topics Include: Identification of Fall Hazards, Analyzing Fall Hazards, Preventing Fall Hazards, and OSHA Resources.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJun 22 Tempe 111334

OSHA 7500 - Introduction to Safety and Health ManagementThis introductory course addresses the four core elements of an effective safety and health program with strategies & techniques that are critical to each element’s proper management. The course is designed for the small employer, business owner or manager designated with the responsibility to develop and manage a firm’s safety and health program or system. The train-ing is also suitable for employees and employee representatives responsible for improving safety and health in the workplace.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 12 San Diego 110941 Jun 21 Tempe 111333

OSHA 7505 - Introduction to Incident (Accident) InvestigationThis course will provide the knowledge, practi-cal skills, and tools to conduct accident and incident investigations. Topics in this interactive course will include needs and responsibilities for investigation, preparation and planning, witness interviewing and qualifying, photo-graphing and diagramming of accident scenes, analytical techniques, report writing, and legal aspects. Human and environmental factors and their interaction with the investigation will also be covered in this two-day course packed with information.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 11-12 San Diego 110900 May 9-10 Tempe 111907 Oct 31-Nov 1 Tucson 111982 Dec 1-2 San Diego 111073

OSHA 7845 - Recordkeeping Rule SeminarThis half-day course will assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illnesses and injuries, and reporting specific cases to OSHA. Several practice workshops are included. Employees of companies that have responsibilities under OSHA’s revised record-keeping Rule 29 CFR 1904 will benefit from this course.

Fee: $125Time: 8:00 a.m.-12:00 p.m.

Dates Location Section IDApr 13 San Diego 110942 Jun 23 Tempe 111335

OSHA 5810 - Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and ProductionThis course provides essential information for employees and employers to protect themselves by developing the knowledge and skills to antic-ipate, recognize, evaluate and control hazards common to the on-shore oil and gas exploration and production industry. This includes work sites associated with the on-shore exploration and production oil and gas industry including, but not limited to construction, drilling, comple-tion, well servicing, production, product gather-ing and processing, and product transmission. This course is intended for employees and employers engaged in all phases of on-shore oil and gas exploration and production.

Fee: $925Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 11-15 Bakersfield 111933

OSHA 6000 - Collateral Duty Course for Other Federal EmployeesIf you are a federal employee, learn to rec-ognize basic safety and health hazards in the workplace and effectively assist agency safety and health officers in their inspection and abatement efforts. This course introduces fed-eral agency collateral duty safety and health personnel to the OSH Act, Executive Order 12196, 29 CFR 1960, and 29 CFR 1910. A mock inspection of a government facility will provide hands on experience. Topics include Walking and Working Surfaces, Industrial Hygiene, Hazardous Materials, Personal Protective Equipment, and Lockout/Tagout.


Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMar 14-17 San Diego 110911 Nov 14-17 San Diego 111068 Nov 28-Dec 1 Tempe 111398

OSHA 7115 - Lockout/TagoutIn this course, students will learn about the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and main-tenance activities on machines and equipment.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 11 San Diego 110940




OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction IndustryThe focus of this TRAINER course is to prepare students to teach the 10 and 30 Hour Outreach classes. Course time is spent learning and prac-ticing adult training techniques. Students will participate in the development and delivery of lectures during class. Thorough knowledge of OSHA Construction Standards (CFR 1926) is required. Following successful completion of the written exam, students become authorized OSHA Trainers in the 10 and 30 Hour Outreach Programs. Laptop recommended.

Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequi-site Form must be sent in, along with your OSHA 510 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 510 course and five years of con-struction safety experience. A college degree in occupational safety and health, a CSP, CIH, CHST or CSHM designation in the applicable training area may be substituted for two years of experi-ence with proper documentation.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 25-28 San Diego 110877 Feb 1-4 Tempe 111291 Feb 16-19 Bakersfield 111917 Feb 29-Mar 3 Claremont 111919 Mar 7-10 Anaheim 112128 Mar 14-17 Sacramento 111922 Mar 21-24 Henderson 111927 Apr 4-7 Tucson 111929 Apr 4-7 Waipahu 112131 Apr 18-21 San Diego 110944 May 2-5 Tempe 111326 Jun 6-9 Reno 111938 Jun 13-16 Los Angeles 112135 Aug 1-4 San Diego 110982 Aug 8-11 Tempe 111382 Aug 15-18 Bakersfield 111968 Aug 22-25 Las Vegas 111969 Aug 29-Sep 1 Claremont 111970 Sep 12-15 Sacramento 111974 Oct 3-6 San Diego 111050 Oct 31-Nov 3 Tempe 111395 Nov 14-17 Reno 111986 Dec 5-8 San Diego 111077

OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General IndustryThe focus of this Trainer course is to prepare students to teach the 10 and 30 Hour Outreach classes. Course time is spent learning and prac-ticing adult training techniques. Students will participate in the development and delivery of lectures during class. Thorough knowledge of OSHA General Industry Standards (CFR 1910) is required. Upon successful course completion, students become authorized OSHA Trainers in the 10 and 30 Hour Outreach Programs. Laptop recommended.

Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequi-site Form must be sent in, along with your OSHA 511 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 511 course and five years of general industry safety experience. A college degree in occupational safety and health, a CSP, CIH, OSHT or CSHM designation in the applicable training area may be substituted for two years of experi-ence with proper documentation.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 1-4 San Diego 110893 Feb 29-Mar 3 Tempe 111313 Apr 11-14 Claremont 111932 May 16-19 Las Vegas 111950 May 16-19 San Diego 110952 May 23-26 Bakersfield 111953 Jun 6-9 Tempe 111329 Jul 18-21 Tucson 111960 Jul 18-21 Waipahu 112139 Jul 25-28 Sacramento 111963 Aug 1-4 Los Angeles 112140 Aug 15-18 San Diego 110987 Aug 22-25 Tempe 111388 Aug 29-Sep 1 Reno 111971 Oct 10-13 Claremont 111978 Oct 24-27 Anaheim 112146 Nov 7-10 Bakersfield 111984 Nov 14-17 San Diego 111067 Dec 5-8 Tempe 111400

Courses Throughout California

Serving many communities throughout the state, UCSD’s OTIEC offers authorized OSHA Training courses and all of the required courses to complete each of our certificates within California.

AnaheimBrookhurst Community Center2271 W. Crescent AvenueAnaheim, CA 92801

BakersfieldNew Location coming Soon.Visit osha.ucsd.edu/Bakersfield for more information.

Los AngelesFigueroa Courtyard261 South Figueroa Los Angeles, CA 90012

Los AngelesUCLA School of Public Health 650 Charles E. Young Dr, S.Los Angeles, CA 90095

San DiegoOSHA Training Institute Education CenterUC San Diego Extension404 Camino del Rio S., Ste 102San Diego, CA 92108

San Diego (University City)OSHA Training Institute Education CenterUC San Diego Extension6256 Greenwich Dr.San Diego, CA 92122

SacramentoSacramento Regional Builders Exchange1331 T Street Sacramento, CA 95811

Travel PlansAll travel plans must accommodate the published course end time .

OTI

EC T

rain

er C

ours

es

15 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

OSHA 5402 - Maritime Industry Trainer Update CourseParticipants will update their maritime trainer status and be able to demonstrate continued development by applying effective adult learn-ing principles and training techniques to iden-tify and explain maritime industry hazards and corrective measures.

Note required prerequisite: OSHA 5400 or OSHA 5402 within four years. IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of Prerequisite Form must be sent in prior to enrollment, along with proof of your trainer status. Acceptable forms of proof are: a copy of your OSHA 5400/OSHA 5402 trainer card or Certificate of completion.

Fee: $675Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMar 7-9 San Diego 110909 Mar 21-23 Waipahu 112129 Dec 5-7 San Diego 111074

OSHA 5600 - Disaster Site Worker Trainer CourseExperienced trainers will learn to present the OSHA 7600 - Disaster Site Worker Course. You will be able to apply elements of successful training programs and will practice knowledge, skills and attitudes through discussion, exercises and presentations. You will receive lesson plans, training materials and information on training techniques and resources. You will be expected to present a select portion of the Disaster Site Worker Course. Re-certification is required every four years.

Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 500 or OSHA 501 and 40-Hour HAZWOPER docu-mentation, to obtain approval to attend the course. The required prerequisites are: OSHA 500 or OSHA 501 course, three years of safe-ty training experience and completion of the 40-Hour HAZWOPER course.

Fee: $725Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDNov 28-Dec 1 San Diego 111072


Fee: $495Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 1-3 Sacramento 111912 Feb 22-24 Los Angeles 112126 Feb 29-Mar 2 San Diego 110905 Mar 21-23 Tempe 111923 May 16-18 Claremont 111948 Jun 13-15 Las Vegas 111955 Jul 11-13 Tempe 111378 Aug 8-10 San Diego 110984 Sep 7-9 Tucson 111972 Oct 10-12 Waipahu 112145 Oct 24-26 Tempe 111394 Oct 31-Nov 2 San Diego 111059

OSHA 5400 - Trainer Course in Occupational Safety and Health Standards for the Maritime IndustryThis is a Trainer Course for those interested in teaching the 10 and 30 Hour Maritime Outreach Program. Special emphasis is placed on required Outreach topics, using OSHA standards as a guide. Students are taught effective adult instructional techniques. This course autho-rizes students to become Maritime Outreach Trainers.

Note: IMPORTANT—ONLINE ENROLLMENT IS NOT PERMITTED. A Verification of prerequisite Form must be sent in, along with your OSHA 5410 documentation, to obtain approval to attend the course. The required prerequisites are: OSHA 5410 course and three years of maritime safety experience. Additional require-ments include two years of occupational safety and health experience (with a broad focus) in any industry; a college degree in occupational safety and health, from an accredited college or university; an ASP, CSP, CIH, CMC or CSHM designation.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 22-25 San Diego 110904 Jun 6-9 San Diego 110959 Nov 7-10 San Diego 111064

OSHA 502 - Update for Construction Industry Outreach TrainersAre you an active trainer in the Outreach Program? Have you completed the Trainer Course for the Construction Industry OSHA 500? You must be updated every four years on training techniques, OSHA construction industry standards, policies, and regulations. Once you successfully complete the course, you are autho-rized to train for an additional four year term. Bring current trainer card to class for verifica-tion of your status. Laptop recommended.


Fee: $495Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 1-3 Los Angeles 112123 Feb 8-10 Las Vegas 111914 Feb 16-18 San Diego 110901 Feb 22-24 Tempe 111311 Feb 22-24 Waipahu 12125 Mar 7-9 Reno 111920 Apr 25-27 Claremont 111935 May 9-11 Sacramento 111941 May 23-25 San Diego 110956 May 23-25 Tucson 111952 Jun 13-15 Tempe 111330 Aug 22-24 San Diego 110991 Aug 29-31 Tempe 111389 Sep 26-28 Claremont 111976 Oct 3-5 Henderson 111977 Oct 31-Nov 2 San Diego 111058

OSHA 503 - Update for General Industry Outreach TrainersAre you an active trainer in the Outreach Program? Have you completed the OSHA 501 - Trainer Course for General Industry? You must be updated every 4 years on training tech-niques, OSHA general industry standards, poli-cies, and regulations. Once you successfully com-plete the course, you are authorized to train for an additional four year term. Must bring current trainer card to class. Laptop recommended.


Course Credit CalculationsUCSD safety and UCSD OTIEC courses offer several types of academic and industry credit . See page 3


Fire and Life SafetySpecifically designed for safety professionals, risk managers, supervisors, operations manager and fire service personnel. Students will receive a comprehensive knowledge of fire and safety requirements in the workplace, and be intro-duced to the history leading to those require-ments as well as the specific codes, standards and regulations resulting from past incidents and organizational efforts. Participants will learn to apply the requirements to specific workplace situations. Systems and equipment used to provide Fire and Safety in the workplace including proper maintenance and inspection will be discussed.

Fee: $925Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMay 16-20 San Diego 110960

Electrical High Voltage Standards - StateFor employees working on or near equipment energized above 600 volts, this intensive two day training course is built around state require-ments. Learn how to maintain a safe, hazard free workplace by learning safety related infor-mation regarding state standards, equipment safety practices, dealing with hazards and the use of protective equipment. Topics include: Personal Protective Equipment, Energized Parts, Grounding, Medical Services/First Aid, and Hazardous Energy Control.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJul 11-12 San Diego 110964

Electrical Low Voltage Standards - StateGet practical training so that your business can maintain a safe, hazard free workplace. This intensive two day training course is built around state requirements for employees work-ing on electrical installations and equipment. Included are safety related information regard-ing state standards, equipment safety practices, dealing with hazards and the use of protective equipment. Topics include: Definitions, Wiring Methods, Practices and Equipment, Lockout/Tagout.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJul 14-15 San Diego 110965

Electrical Safety Standards - NFPA 70E - 2-DayIf you work on or near energized electrical sys-tems, have a safety role at these sites or are an emergency responder, this course is for you. The new electrical safety standards (NFPA 70E) are the next step to a safer electrical environment in the workplace. Anyone who deals with haz-ards such as electrocutions, fires and explosions should attend. Learn how to prevent serious dis-abling injuries, damage to equipment and work sites and most importantly, save lives.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 16-17 San Diego 110902 Aug 17-18 Tempe 111384Aug 22-23 San Diego 110990

UCSD Safety Courses

EM385-1-1 40 Hour SafetyThis course is for contractors, military and gov-ernment employees who enforce or must comply to the EM385-1-1 US Army Corps of Engineers safety and health requirements. You will learn procedures of the Navy and US Army Corps of Engineers contracts, and the safety and health requirements of the US Army Corps of Engineers Safety and Health Requirements manual. Upon completion, students receive an official OSHA 30 Hour card for Construction. Topics include: Preparation of Site-Specific Accident Prevention Plan (APP), Intro to OSHA, Site Safety Health Officer’s Qualifications & Responsibilities, Activity Hazard Analysis development, Site Personnel training, Incident Response, Job site Auditing, and Hazard Communication.

Fee: $925Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 1-5 San Diego 110894 Mar 14-18 Tempe 111319 Aug 8-12 San Diego 110986Sep19-23 Tempe 111924

Electrical High Voltage Standards - FederalOSHA classifies any use of electrical service over 600 volts as high voltage. Regulations and accepted industry standards state that employers meet specific training requirements for their employees who work with high volt-age electrical installations. These rules apply to commercial, industrial, and government sites as well as electric utility generation, transmis-sion and distribution installations. This course provides information crucial to safely operate your facility. Along with advance knowledge of critical compliance issues, emphasis is placed on hazard awareness and abatement meth-ods. Topics Include: Fundamentals, Definitions, Wiring Methods, Practices and Equipment, Lockout/Tagout. Recommended prerequisite: OSHA 3095.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMay 9-12 San Diego 110951

Safety in the Silver State

With classes offered in “The City of Lights” and “The Biggest Little City in the World,” UCSD’s OTIEC proudly works with host sites committed to providing safety training throughout Nevada.

HendersonNevada OSHA/SCATS1301 N. Green Valley Pkwy, Ste 200Henderson, NV 89074

Las VegasAssociated General Contractors150 N. Durango Drive, Ste 100Las Vegas, NV 89145

RenoAGC Nevada5400 Mill StreetReno, NV 89510

UCS

D S

afet

y Co

urse

s

17 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

Trainer Course - Rigging SafetyThis course covers advanced rigging principles, safety requirements, and key considerations for safe rigging. Students participating in this course will be able to identify appropriate rigging techniques; they will understand sling angles and the stresses imposed. They will go thru OSHA’s new regulations on qualifications of riggers and the national consensus stan-dards for rigging to include sling and hardware inspections and rejection criteria. An extensive use of hands-on practical techniques empha-sizes the training and the course is completed with a tour of an active rigging shop.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 4-7 San Diego 110938Jun 20-23 San Diego 110963Sep 12-15 Tempe 111386

Trainer Course - TrenchingThis course reviews the Federal and State OSHA requirements for excavation and trenching activities. Emphasis will be placed on training techniques, prevention strategies and practices such as inspections, permitting procedures, soil analysis, and competent person responsibilities.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 4-5 San Diego 110895Sep 1-2 San Diego 110994

Trainer Course - Confined SpaceGain the knowledge and skills to instruct a confined space entry class within your organiza-tion. The course will cover advanced confined space issues, teaching, resources, instructional methodology and points on how to jazz up your presentation. Students will be required to give a ten minute presentation for evaluation by other students.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDApr 28-29 San Diego 110947Oct 27-28 San Diego 111057

Trainer Course - Fall ProtectionContinuation of the OSHA 3110 course, this course teaches students how to apply the fall protection standards, and teaches training tech-niques that are effective and develops an effec-tive training course for both classroom and hands-on in the field.

Fee: $250Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDMay 6 San Diego 110950 Dec 9 San Diego 111080

Trainer Course - Forklift SafetyParticipants will learn the OSHA requirements, how they affect companies and how to com-ply with the standards. This course is designed to give the tools and knowledge needed to return to work and teach forklift operators OSHA requirements. Trainers should have a basic understanding of forklift operations and procedures. Forklift operating experience is helpful but not needed for this course. An operational supervisor may be needed to assist you in training and evaluation of your facility. Topics Include: rough terrain, extendable boom and vertical mast.

Fee: $425Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJun 6-7 San Diego 110957Aug 15-16 Tempe 111383Oct 10-11 San Diego 111053

Laws and RegulationsThis course includes a basic overview of Federal OSHA standards with main emphasis on Cal/OSHA standards. Students will be coached through a jobsite inspection process from the opening conference to the closing conference. Working group sessions will study actual court cases highlighting preparation for a hearing, burden of proof, affirmative defense and dis-covery. The overall objective of this course is to enable students to better prepare for work-place inspections conducted by OSHA. Topics Include: Fed OSHA and Cal OSHA, Litigation, Injury Illness Prevention, Personal Protective Equipment, and Respiratory Protection.

Fee: $750Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDSep 19-22 San Diego 111037

Safety Inspection TechniquesLearn the most commonly used safety inspec-tion standards, tools and techniques in this 3-day course. Experience an organized approach to inspecting and auditing projects to insure OSHA compliance and injury prevention. Visit both construction and general industry sites to perform an inspection and prepare a final report.

Fee: $675Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDFeb 8-10 San Diego 110896May 11-13 Tempe 111321Nov 28-30 San Diego 111069

ScaffoldingDuring this course you will become familiar with the OSHA compliance standards for vari-ous types of scaffolding including supported, suspended, and aerial lifts. You will also learn how scaffolds work and how to do basic load analysis, as well as hands-on field exercises, the OSHA standards for scaffolding, and resource material. Topics include: Platforms, Bracing, Guardrails, Falling Objects, Tie-Ins and Scaffold Bracing, and Mobile Scaffolds.

Fee: $675Time: 8:00 a.m.-4:30 p.m.

Dates Location Section IDJan 19-21 San Diego 110876Mar 14-16 Tempe 111320Jul 25-27 San Diego 110967Sep 7-9 Tempe 111385Sep 12-14 Waipahu 112143

UCSD

Safety Courses

18

UCSD’S OSHA TRAINING INSTITUTE EDUCATION CENTER INSTRUCTORS

The Heart of our Education CenterWe take pride in our instructors and believe they are the heart of your experience at UCSD’s OTIEC. Each instructor is hand-picked and dedi-cated to providing you with the knowledge you need.

They bring to the classroom a wealth of experience, up-to-date subject matter expertise and a passion for sharing their insights and wisdom.

Our instructors include current and former state OSHA staff, published industry authors, leaders of large organizations throughout the coun-try and consultants within the Construction, Disaster Site, General Industry, Maritime and military specialties.

Inst

ruct

ors

U C S a n D i e g o E x t e n s i o n ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

Tristan Aldeguer, ASP, CHST Russ Barringer, CSP, CSHM, MSJeff Beeler, CSTIMark Behrens, CSPMark E. Bipes, CIH, CSPJames Breay, MS, CIHBob Downey, BA, MPA, CSP, CPPMichelle Eisenberg, MPH, RPT, CIERobert Fernandez, RSSPCharles Geraci, CBCPHarold Gribow, MS, CSP, ARM

Dave Hancock, BA,MA,CHDTJohn Harr, BA, MHS, CSEBob Harrell, BA Steve Healey, ASP, CHST, CUSA, STSCBrian Heramb, CIH, FAIHAVan Howell, BA, CSP, CETSteven IrwinTracy Lawson, CSP, CET, CHST, CPEA Jeff Lewis, MS, RSP, CSSM, DMTJohn Marsden, CHSTJohn McHugh

Randy McPheeters, BA, MA, CSPDave Nelson, Master ElectricianJim Newberry, CHST Mark Norton, MAOM, RSP,CSSMJohn O’Toole, Ph.D., RSSPTim Page-Bottorff, CSPSuzy Shamsky, MPH, CIH, CSPThomas Stefanik, MS, CSPMary Sullivan, MS, CSP, OHST, CHSTDan Tappen, MPH, CIH Rick Wilson

INSTRUCTORS LIST

For nearly 20 years, The American Society of Safety Engineers Chapters in Phoenix and Tucson and the Arizona Safety Education Center have proudly offered authorized OSHA Training courses, as a host site of UCSD’s OSHA Training Institute Education Center, throughout the Phoenix and Tucson areas.

We are proud to offer all of the courses required to complete the Professional Certificate in Occupational Health and Safety.

Courses in Arizona

osha .ucsd .edu/Arizona

Arizona Course Locations

Phoenix

Arizona Safety Education Center 201 East Southern Avenue, Ste 204

Tempe, AZ 85282

Tucson

Arizona Dept. of Occupational Safety & Health (ADOSH)

2675 East Broadway Boulevard Tucson, AZ 85719

For biographies and a current list of UCSD instructors, visit osha.ucsd.edu.

19

COURSE TYPE COURSE TITLE DATES LOCATION SECTION ID

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 11-14 San Diego 110874

OTIEC OSHA 511 - OS&H Standards for General Industry Jan 11-14 San Diego 110875

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 11-14 Tempe 111285

UCSD Scaffolding Jan 19-21 San Diego 110876

OTIEC OSHA 3115 - Fall Protection Jan 19-22 Tempe 111289

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 19-22 Bakersfield 111910

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jan 25-28 San Diego 110877

OTIEC OSHA 2225 - Respiratory Protection Jan 25-28 San Diego 110878

OTIEC OSHA 2055 - Cranes in Construction Jan 25-28 Tempe 111295

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Jan 25-28 Claremont 111911

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 25-28 Waipahu 112116

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 25-28 Anaheim 112117

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Feb 1-3 San Diego 110879

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 1-3 Sacramento 111912

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 1-3 Los Angeles 112123

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Feb 1-4 San Diego 110893

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 1-4 Tempe 111291

UCSD EM385-1-1 40 Hour Safety Feb 1-5 San Diego 110894

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Feb 4 Sacramento 111913

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Feb 4 Los Angeles 112124

UCSD Trainer Course - Trenching Feb 4-5 San Diego 110895

UCSD Safety Inspection Techniques Feb 8-10 San Diego 110896

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 8-10 Las Vegas 111914

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 8-11 Claremont 111915

OTIEC OSHA 511 - OS&H Standards for General Industry Feb 8-11 Tempe 111316

OTIEC OSHA 5410 - OS&H Standards for the Maritime Industry Feb 8-12 San Diego 110899

OTIEC OSHA 7505 - Introduction to Accident Investigation Feb 11-12 San Diego 110900

UCSD Electrical Safety Standards - NFPA 70E Feb 16-17 San Diego 110902

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 16-18 San Diego 110901

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Feb 16-19 Tempe 111309

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 16-19 Sacramento 111916

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 16-19 Bakersfield 111917

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Feb 19 San Diego 110903

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 22-24 Tempe 111311

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 22-24 Waipahu 112125

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 22-24 Los Angeles 112126

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Feb 22-25 San Diego 110904

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 22-25 Henderson 111918

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Feb 25 Los Angeles 112127

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 29-Mar 2 San Diego 110905

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Feb 29-Mar 3 San Diego 110906

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Feb 29-Mar 3 San Diego 110907

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Feb 29-Mar 3 Tempe 111313

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 29-Mar 3 Claremont 111919

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Mar 4 San Diego 111081

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Mar 7-9 San Diego 110909

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Mar 7-9 Reno 111920

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Mar 7-10 San Diego 110910

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Mar 7-10 Tucson 111921

OTIEC OSHA 2255 - Principles of Ergonomics Mar 7-10 Tempe 111317

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 7-10 Anaheim 112128

UCSD Scaffolding Mar 14-16 Tempe 111320

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Mar 14-17 San Diego 110911

2016 Courses At-A-Glance, by Date

At-A

-Glance (by D

ate)

( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u



OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Mar 14-17 San Diego 110912

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 14-17 Sacramento 111922

UCSD EM385-1-1 40 Hour Safety Mar 14-18 Tempe 111319

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Mar 21-23 Tempe 111923

OTIEC OSHA 511 - OS&H Standards for General Industry Mar 21-24 Claremont 111926

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 21-24 Henderson 111927

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Mar 21-24 Los Angeles 112130

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Mar 21-22 Waipahu 112129

UCSD Trainer Course - Rigging Safety Apr 4-7 San Diego 110938

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Apr 4-7 San Diego 110939

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Apr 4-7 Tempe 111322

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 4-7 Tucson 111929

OTIEC OSHA 5109 - Cal/OSHA Standards for the Construction Industry Apr 4-7 Sacramento 111931

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 4-7 Waipahu 112131

OTIEC OSHA 7115 - Lockout/Tagout Apr 11 San Diego 110940

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Apr 11-13 Anaheim 112132

OTIEC OSHA 2255 - Principles of Ergonomics April 11-14 San Diego 110943

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Apr 11-14 Tempe 111323

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Apr 11-14 Claremont 111932

OTIEC OSHA 5810 - Hazards & Standards for On-Shore Oil and Gas Apr 11-15 Bakersfield 111933

OTIEC OSHA 7500 - Introduction to Safety and Health Management Apr 12 San Diego 110941

OTIEC OSHA 7845 - Recordkeeping Rule Seminar Apr 13 San Diego 110942

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 18-21 San Diego 110944

OTIEC OSHA 2225 - Respiratory Protection Apr 18-21 Tempe 111324

OTIEC OSHA 511 - OS&H Standards for General Industry Apr 18-21 Las Vegas 111934

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Apr 25-27 San Diego 110945

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Apr 25-27 Claremont 111935

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Apr 25-28 San Diego 110946

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Apr 25-28 Tempe 111228

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Apr 25-28 Los Angeles 112133

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Apr 28 Claremont 111937

UCSD Trainer Course - Confined Space Apr 28-29 San Diego 110947

OTIEC OSHA 511 - OS&H Standards for General Industry May 2-5 San Diego 110948

OTIEC OSHA 3115 - Fall Protection May 2-5 San Diego 110949

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry May 2-5 Tempe 111326

OTIEC OSHA 510 - OS&H Standards for the Construction Industry May 2-5 Reno 111939

OTIEC OSHA 511 - OS&H Standards for General Industry May 2-5 Bakersfield 111940

UCSD Trainer Course - Fall Proection May 6 San Diego 110950

OTIEC OSHA 7505 - Introduction to Accident Investigation May 9-10 Tempe 111907

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 9-11 Sacramento 111941

UCSD Electrical High Voltage Standards - Federal May 9-12 San Diego 110951

UCSD Safety Inspection Techniques May 11-13 Tempe 111321

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers May 12 Sacramento 111947

OTIEC OSHA 503 - Update for General Industry Outreach Trainers May 16-18 Claremont 111948

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 16-19 San Diego 110952

OTIEC OSHA 511 - OS&H Standards for General Industry May 16-19 Tempe 111327

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 16-19 Las Vegas 111950

OTIEC OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry May 16-20 San Diego 110955

UCSD Fire and Life Safety May 16-20 San Diego 110960

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers May 19 Claremont 111951

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 23-25 San Diego 110956

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 23-25 Tucson 111952

OTIEC OSHA 2264 - Permit-Required Confined Space Entry May 23-25 Tempe 111328

UC San Diego Extension’s Occupational Safety & Health Department

At-

A-G

lanc

e (b

y D

ate)

21 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 23-26 Bakersfield 111953

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry May 23-26 Los Angeles 112134

UCSD Trainer Course - Forklift Safety Jun 6-7 San Diego 110957

OTIEC OSHA 2015 - Hazardous Materials Jun 6-9 San Diego 110958

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Jun 6-9 San Diego 110959

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jun 6-9 Tempe 111329

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Jun 6-9 Claremont 111954

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jun 6-9 Reno 111938

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Jun 13-15 Tempe 111330

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Jun 13-15 Las Vegas 111955

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 13-16 Tucson 111956

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jun 13-16 Los Angeles 112135

OTIEC OSHA 7205 - Health Hazard Awareness Jun 20 Tempe 111332

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Jun 20-23 San Diego 110962

UCSD Trainer Course - Rigging Safety Jun 20-23 San Diego 110963

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Jun 20-23 Bakersfield 112263

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 20-23 Waipahu 112136

OTIEC OSHA 7500 -Introduction to Safety & Health Management Jun 21 Tempe 111333

OTIEC OSHA 7405 - Fall Hazard Awareness for the Construction Industry Jun 22 Tempe 111334

OTIEC OSHA 7845 - Recordkeeping Rule Seminar Jun 23 Tempe 111335

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Jun 27-29 Tempe 111376

OTIEC OSHA 2015 - Hazardous Materials Jun 27-30 Tempe 112227

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 27-30 Sacramento 111958

UCSD Electrical High Voltage Standards - State Jul 11-12 San Diego 110964

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Jul 11-13 Tempe 111378

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 11-14 San Diego 110968

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Jul 11-14 Claremont 111959

OTIEC OSHA 2225 - Respiratory Protection Jul 11-14 Los Angeles 112137

UCSD Electrical Low Voltage Stands - State Jul 14-15 San Diego 110965

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 18-21 Tempe 111379

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 18-21 Tucson 111960

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 18-21 Bakersfield 111961

OTIEC OSHA 511 - OS&H Standards for General Industry Jul 18-21 Los Angeles 112138

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 18-21 Waipahu 112139

UCSD Scaffolding Jul 25-27 San Diego 110967

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Jul 25-27 Claremont 111962

OTIEC OSHA 511 - OS&H Standards for General Industry Jul 25-28 San Diego 110969

OTIEC OSHA 2225 - Respiratory Protection Jul 25-28 San Diego 110979

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Jul 25-28 Tempe 111380

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 25-28 Sacramento 111963

OTIEC OSHA 2255 - Principles of Ergonomics Aug 1-4 San Diego 110981

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 1-4 San Diego 110982

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Aug 1-4 San Diego 110983

OTIEC OSHA 511 - OS&H Standards for General Industry Aug 1-4 Tempe 111381

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 1-4 Las Vegas 111964

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 1-4 Los Angeles 112140

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Aug 8-10 San Diego 110984

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Aug 8-11 San Diego 110985

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 8-11 Tempe 111382

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 8-11 Claremont 111965

OTIEC OSHA 511 - OS&H Standards for General Industry Aug 8-11 Reno 111966

UCSD EM385-1-1 40-Hour Safety Aug 8-12 San Diego 110986

UCSD Trainer Course - Forklift Safety Aug 15-16 Tempe 111383

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 15-18 San Diego 110987


At-A

-Glance (by D

ate)




OTIEC OSHA 5109 - Cal/OSHA Standards for the Construction Industry Aug 15-18 San Diego 110988

OTIEC OSHA 3115 - Fall Protection Aug 15-18 San Diego 110989

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 15-18 Sacramento 111967

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 15-18 Bakersfield 111968

OTIEC OSHA 2225 - Respiratory Protection Aug 15-18 Waipahu 112141

UCSD Electrical Safety Standards -NFPA 70E- 2 Day Aug 17-18 Tempe 111384

UCSD Electrical Safety Standards - NFPA 70E Aug 22-23 San Diego 110990

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Aug 22-24 San Diego 110991

OTIEC OSHA 2255 - Principles of Ergonomics Aug 22-25 Los Angeles 112142

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 22-25 Tempe 111388

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 22-25 Las Vegas 111969

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Aug 25 San Diego 110992

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Aug 29-31 San Diego 110993

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Aug 29-31 Tempe 111389

OTIEC OSHA 2055 - Cranes in Construction Aug 29-Sep 1 San Diego 110995

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 29-Sep 1 Claremont 111970

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 29-Sep 1 Reno 111971

UCSD Trainer Course - Trenching Sep 1-2 San Diego 110994

UCSD Scaffolding Sep 7-9 Tempe 111385

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Sep 7-9 Tucson 111972

UCSD Scaffolding Sep 12-14 Waipahu 112143

UCSD Trainer Course - Rigging Safety Sep 12-15 Tempe 111386

OTIEC OSHA 511 - OS&H Standards for General Industry Sep 12-15 Claremont 111973

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Sep 12-15 Sacramento 111974

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Sep 19-22 San Diego 111035

OTIEC OSHA 2015 - Hazardous Materials Sep 19-22 San Diego 111036

UCSD Laws and Regulations Sep 19-22 San Diego 111037

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Sep 19-22 Bakersfield 111975

OTIEC OSHA 511 - OS&H Standards for General Industry Sep 19-22 Anaheim 112144

UCSD EM385-1-1 40 Hour Safety Sep 19-23 Tempe 111924

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Sep 26-28 Claremont 111976

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Sep 26-28 Los Angeles 112422

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Sep 26-29 San Diego 111049

OTIEC OSHA 3115 - Fall Protection Sep 26-29 Tempe 111390

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Oct 3-5 Henderson 111977

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Oct 3-6 San Diego 111050

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Oct 3-6 San Diego 111052

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Oct 3-6 Tempe 111391

UCSD Trainer Course - Forklift Safety Oct 10-11 San Diego 111053

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Oct 10-12 Tempe 111392

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 10-12 Waipahu 112145

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Oct 10-13 Claremont 111978

OTIEC OSHA 511 - OS&H Standards for General Industry Oct 10-13 Bakersfield 111979

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Oct 24-26 San Diego 111054

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 24-26 Tempe 111394

OTIEC OSHA 3115 - Fall Protection Oct 24-26 Claremont 111980

OTIEC OSHA 511 - OS&H Standards for General Industry Oct 24-27 San Diego 111055

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Oct 24-27 Reno 111981

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Oct 24-27 Anaheim 112146

OTIEC OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry Oct 24-28 San Diego 111056

UCSD Trainer Course - Confined Space Oct 27-28 San Diego 111057

OTIEC OSHA 7505 - Introduction to Accident Investigation Oct 31-Nov 1 Tucson 111982

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Oct 31-Nov 2 San Diego 111058

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 31-Nov 2 San Diego 111059


At-

A-G

lanc

e (b

y D

ate)

23 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

OTIEC OSHA 2225 - Respiratory Protection Oct 31-Nov 3 San Diego 111060

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Oct 31-Nov 3 Tempe 111395

OTIEC OSHA 2015 - Hazardous Materials Oct 31-Nov 3 Los Angeles 113261

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Nov 3 San Diego 111061

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Nov 7-9 San Diego 111062

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Nov 7-10 San Diego 111063

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Nov 7-10 San Diego 111064

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 7-10 Tempe 111396

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Nov 7-10 Sacramento 111983

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Nov 7-10 Bakersfield 111984

OTIEC OSHA 3115 - Fall Protection Nov 7-10 Waipahu 112150

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Nov 14-17 San Diego 111065

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Nov 14-17 San Diego 111067

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Nov 14-17 San Diego 111068

OTIEC OSHA 511 - OS&H Standards for General Industry Nov 14-17 Tempe 111397

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 14-17 Las Vegas 111985

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Nov 14-17 Reno 111986

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Nov 14-17 Anaheim 112153

UCSD Safety Inspection Techniques Nov 28-30 San Diego 111069

OTIEC OSHA 2255 - Principles of Ergonomics Nov 28-Dec 1 San Diego 111071

OTIEC OSHA 5600 - Disaster Site Worker Trainer Course Nov 28-Dec 1 San Diego 111072

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Nov 28-Dec 1 Tempe 111398

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 28-Dec 1 Claremont 111987

OTIEC OSHA 7505 - Introduction to Accident Investigation Dec 1-2 San Diego 111073

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Dec 5-7 San Diego 111074

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Dec 5-7 Waipahu 112155

OTIEC OSHA 3115 - Fall Protection Dec 5-8 San Diego 111075

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Dec 5-8 San Diego 111077

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Dec 5-8 Tempe 111400

UCSD Trainer Course - Fall Proection Dec 9 San Diego 111080


At-A

-Glance (by D

ate)


For a PDF version of the

At-A-Glance by date

and/or by location please

visit osha.ucsd.edu

Earn Your UCSD Hard Hat!

Earn a Professional Certificate from UC San Diego Extension’s OSHA Training Institute and proudly wear your safety hard hat!

All graduates of the Professional Certificate

in Safety and Health are eligible to receive

this free gift.

Safety Certificates for Veterans

UC San Diego Extension’s Occupational Safety and Health Department proudly offers two pro-grams for US military veterans that have been approved for use with VA educational benefits.

• Professional Certificate in Occupational Safety & Health (see p. 7)• Safety Specialist Certificate (see p.8)

To learn more about applying VA educational benefits to our safety certificate programs, we encourage veterans to contact [email protected] with any questions


UC San Diego Extension’s Occupational Safety & Health Department COURSE TYPE COURSE TITLE DATES LOCATION SECTION ID

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 25-28 Anaheim 112117

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 7-10 Anaheim 112128

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Apr 11-13 Anaheim 112132

OTIEC OSHA 511 - OS&H Standards for General Industry Sep 19-22 Anaheim 112144

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Oct 24-27 Anaheim 112146

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Nov 14-17 Anaheim 112153

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 19-22 Bakersfield 111910

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 16-19 Bakersfield 111917

OTIEC OSHA 5810 - Hazards & Standards for On-Shore Oil and Gas Apr 11-15 Bakersfield 111933

OTIEC OSHA 511 - OS&H Standards for General Industry May 2-5 Bakersfield 111940

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 23-26 Bakersfield 111953

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Jun 20-23 Bakersfield 112263

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 18-21 Bakersfield 111961

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 15-18 Bakersfield 111968

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Sep 19-22 Bakersfield 111975

OTIEC OSHA 511 - OS&H Standards for General Industry Oct 10-13 Bakersfield 111979

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Nov 7-10 Bakersfield 111984

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Jan 25-28 Claremont 111911

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 8-11 Claremont 111915

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 29-Mar 3 Claremont 111919

OTIEC OSHA 511 - OS&H Standards for General Industry Mar 21-24 Claremont 111926

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Apr 11-14 Claremont 111932

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Apr 25-27 Claremont 111935

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Apr 28 Claremont 111937

OTIEC OSHA 503 - Update for General Industry Outreach Trainers May 16-18 Claremont 111948

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers May 19 Claremont 111951

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Jun 6-9 Claremont 111954

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Jul 11-14 Claremont 111959

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Jul 25-28 Claremont 111962

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 8-11 Claremont 111965

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 29-Sep 1 Claremont 111970

OTIEC OSHA 511 - OS&H Standards for General Industry Sep 12-15 Claremont 111973

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Sep 26-28 Claremont 111976

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Oct 10-13 Claremont 111978

OTIEC OSHA 3115 - Fall Protection Oct 24-26 Claremont 111980

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 28-Dec 1 Claremont 111987

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 22-25 Henderson 111918

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 21-24 Henderson 111927

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Oct 3-5 Henderson 111977

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 8-10 Las Vegas 111914

OTIEC OSHA 511 - OS&H Standards for General Industry Apr 18-21 Las Vegas 111934

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 16-19 Las Vegas 111950

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Jun 13-15 Las Vegas 111955

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 1-4 Las Vegas 111964

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 22-25 Las Vegas 111969

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 14-17 Las Vegas 111985

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 1-3 Los Angeles 112123

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Feb 4 Los Angeles 112124

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 22-24 Los Angeles 112126

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Feb 25 Los Angeles 112127

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Mar 21-24 Los Angeles 112130

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Apr 25-28 Los Angeles 112133

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry May 23-26 Los Angeles 112134

At-

A-G

lanc

e (b

y lo

cati

on)

25 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u


OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jun 13-16 Los Angeles 112135

OTIEC OSHA 2225 - Respiratory Protection Jul 11-14 Los Angeles 112137

OTIEC OSHA 511 - OS&H Standards for General Industry Jul 18-21 Los Angeles 112138

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 1-4 Los Angeles 112140

OTIEC OSHA 2255 - Principles of Ergonomics Aug 22-25 Los Angeles 112142

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Sep 26-28 Los Angeles 112422

OTIEC OSHA 2015 - Hazardous Materials Oct 31-Nov 3 Los Angeles 113261

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Mar 7-9 Reno 111920

OTIEC OSHA 510 - OS&H Standards for the Construction Industry May 2-5 Reno 111939

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jun 6-9 Reno 111938

OTIEC OSHA 511 - OS&H Standards for General Industry Aug 8-11 Reno 111966

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 29-Sep 1 Reno 111971

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Oct 24-27 Reno 111981

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Nov 14-17 Reno 111986

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 1-3 Sacramento 111912

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Feb 4 Sacramento 111913

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Feb 16-19 Sacramento 111916

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Mar 14-17 Sacramento 111922

OTIEC OSHA 5109 - Cal/OSHA Standards for the Construction Industry Apr 4-7 Sacramento 111931

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 9-11 Sacramento 111941

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers May 12 Sacramento 111947

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 27-30 Sacramento 111958

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 25-28 Sacramento 111963

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Sep 12-15 Sacramento 111974

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Aug 15-18 Sacramento 111967

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Nov 7-10 Sacramento 111983

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 11-14 San Diego 110874

OTIEC OSHA 511 - OS&H Standards for General Industry Jan 11-14 San Diego 110875

UCSD Scaffolding Jan 19-21 San Diego 110876

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Jan 25-28 San Diego 110877

OTIEC OSHA 2225 - Respiratory Protection Jan 25-28 San Diego 110878

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Feb 1-3 San Diego 110879

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Feb 1-4 San Diego 110893

UCSD EM385-1-1 40 Hour Safety Feb 1-5 San Diego 110894

UCSD Trainer Course - Trenching Feb 4-5 San Diego 110895

UCSD Safety Inspection Techniques Feb 8-10 San Diego 110896

OTIEC OSHA 5410 - OS&H Standards for the Maritime Industry Feb 8-12 San Diego 110899

OTIEC OSHA 7505 - Introduction to Accident Investigation Feb 11-12 San Diego 110900

UCSD Electrical Safety Standards - NFPA 70E Feb 16-17 San Diego 110902

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 16-18 San Diego 110901

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Feb 19 San Diego 110903

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Feb 22-25 San Diego 110904

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Feb 29-Mar 2 San Diego 110905

Cal/OSHA OSHA 5109 - Cal/OSHA Standards for the Construction Industry Feb 29-Mar 3 San Diego 110906

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Feb 29-Mar 3 San Diego 110907

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Mar 4 San Diego 111081

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Mar 7-9 San Diego 110909

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Mar 7-10 San Diego 110910

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Mar 14-17 San Diego 110911

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Mar 14-17 San Diego 110912

UCSD Trainer Course - Rigging Safety Apr 4-7 San Diego 110938

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Apr 4-7 San Diego 110939

OTIEC OSHA 7115 - Lockout/Tagout Apr 11 San Diego 110940

At-A

-Glance (by location)

2016 Courses At-A-Glance, by Location



OTIEC OSHA 2255 - Principles of Ergonomics April 11-14 San Diego 110943

OTIEC OSHA 7500 - Introduction to Safety and Health Management Apr 12 San Diego 110941

OTIEC OSHA 7845 - Recordkeeping Rule Seminar Apr 13 San Diego 110942

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 18-21 San Diego 110944

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Apr 25-27 San Diego 110945

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Apr 25-28 San Diego 110946

UCSD Trainer Course - Confined Space Apr 28-29 San Diego 110947

OTIEC OSHA 511 - OS&H Standards for General Industry May 2-5 San Diego 110948

OTIEC OSHA 3115 - Fall Protection May 2-5 San Diego 110949

UCSD Trainer Course - Fall Proection May 6 San Diego 110950

UCSD Electrical High Voltage Standards - Federal May 9-12 San Diego 110951

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry May 16-19 San Diego 110952

OTIEC OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry May 16-20 San Diego 110955

UCSD Fire and Life Safety May 16-20 San Diego 110960

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 23-25 San Diego 110956

UCSD Trainer Course - Fall Proection Jun 6-7 San Diego 110957

OTIEC OSHA 2015 - Hazardous Materials Jun 6-9 San Diego 110958

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Jun 6-9 San Diego 110959

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Jun 20-23 San Diego 110962

UCSD Trainer Course - Rigging Safety Jun 20-23 San Diego 110963

UCSD Electrical High Voltage Standards - State Jul 11-12 San Diego 110964

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 11-14 San Diego 110968

UCSD Electrical Low Voltage Stands - State Jul 14-15 San Diego 110965

UCSD Scaffolding Jul 25-27 San Diego 110967

OTIEC OSHA 511 - OS&H Standards for General Industry Jul 25-28 San Diego 110969

OTIEC OSHA 2225 - Respiratory Protection Jul 25-28 San Diego 110979

OTIEC OSHA 2255 - Principles of Ergonomics Aug 1-4 San Diego 110981

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 1-4 San Diego 110982

Cal/OSHA OSHA 5119 - Cal/OSHA Standards for General Industry Aug 1-4 San Diego 110983

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Aug 8-10 San Diego 110984

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Aug 8-11 San Diego 110985

UCSD EM385-1-1 40-Hour Safety Aug 8-12 San Diego 110986

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 15-18 San Diego 110987

OTIEC OSHA 5109 - Cal/OSHA Standards for the Construction Industry Aug 15-18 San Diego 110988

OTIEC OSHA 3115 - Fall Protection Aug 15-18 San Diego 110989

UCSD Electrical Safety Standards - NFPA 70E Aug 22-23 San Diego 110990

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Aug 22-24 San Diego 110991

Cal/OSHA OSHA 5029 - Cal/OSHA Update for Construction Industry Outreach Trainers Aug 25 San Diego 110992

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Aug 29-31 San Diego 110993

OTIEC OSHA 2055 - Cranes in Construction Aug 29-Sep 1 San Diego 110995

UCSD Trainer Course - Trenching Sep 1-2 San Diego 110994

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Sep 19-22 San Diego 111035

OTIEC OSHA 2015 - Hazardous Materials Sep 19-22 San Diego 111036

UCSD Laws and Regulations Sep 19-22 San Diego 111037

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Sep 26-29 San Diego 111049

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Oct 3-6 San Diego 111050

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Oct 3-6 San Diego 111052

UCSD Trainer Course - Forklift Safety Oct 10-11 San Diego 111053

OTIEC OSHA 2264 - Permit-Required Confined Space Entry Oct 24-26 San Diego 111054

OTIEC OSHA 511 - OS&H Standards for General Industry Oct 24-27 San Diego 111055

OTIEC OSHA 5410 - Occupational Safety and Health Standards for the Maritime Industry Oct 24-28 San Diego 111056

UCSD Trainer Course - Confined Space Oct 27-28 San Diego 111057

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Oct 31-Nov 2 San Diego 111058

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 31-Nov 2 San Diego 111059


At-

A-G

lanc

e (b

y lo

cati

on)

27 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

OTIEC OSHA 2225 - Respiratory Protection Oct 31-Nov 3 San Diego 111060

Cal/OSHA OSHA 5039 - Cal/OSHA Update for General Industry Trainers Nov 3 San Diego 111061

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Nov 7-9 San Diego 111062

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Nov 7-10 San Diego 111063

OTIEC OSHA 5400 - Trainer Course in Occupational Safety and Health for the Maritime Industry Nov 7-10 San Diego 111064

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Nov 14-17 San Diego 111065

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Nov 14-17 San Diego 111067

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Nov 14-17 San Diego 111068

UCSD Safety Inspection Techniques Nov 28-30 San Diego 111069

OTIEC OSHA 2255 - Principles of Ergonomics Nov 28-Dec 1 San Diego 111071

OTIEC OSHA 5600 - Disaster Site Worker Trainer Course Nov 28-Dec 1 San Diego 111072

OTIEC OSHA 7505 - Introduction to Accident Investigation Dec 1-2 San Diego 111073

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Dec 5-7 San Diego 111074

OTIEC OSHA 3115 - Fall Protection Dec 5-8 San Diego 111075

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Dec 5-8 San Diego 111077

UCSD Trainer Course - Fall Proection Dec 9 San Diego 111080

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 11-14 Tempe 111285

OTIEC OSHA 3115 - Fall Protection Jan 19-22 Tempe 111289

OTIEC OSHA 2055 - Cranes in Construction Jan 25-28 Tempe 111295

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Feb 1-4 Tempe 111291

OTIEC OSHA 511 - OS&H Standards for General Industry Feb 8-11 Tempe 111316

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Feb 16-19 Tempe 111309

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 22-24 Tempe 111311

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Feb 29-Mar 3 Tempe 111313

OTIEC OSHA 2255 - Principles of Ergonomics Mar 7-10 Tempe 111317

UCSD Scaffolding Mar 14-16 Tempe 111320

UCSD EM385-1-1 40 Hour Safety Mar 14-18 Tempe 111319

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Mar 21-23 Tempe 111923

OTIEC OSHA 521 - OSHA Guide to Industrial Hygiene Apr 4-7 Tempe 111322

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Apr 11-14 Tempe 111323

OTIEC OSHA 2225 - Respiratory Protection Apr 18-21 Tempe 111324

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Apr 25-28 Tempe 111228

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry May 2-5 Tempe 111326

OTIEC OSHA 7505 - Introduction to Accident Investigation May 9-10 Tempe 111907

UCSD Safety Inspection Techniques May 11-13 Tempe 111321

OTIEC OSHA 511 - OS&H Standards for General Industry May 16-19 Tempe 111327

OTIEC OSHA 2264 - Permit-Required Confined Space Entry May 23-25 Tempe 111328

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jun 6-9 Tempe 111329

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Jun 13-15 Tempe 111330

OTIEC OSHA 7205 - Health Hazard Awareness Jun 20 Tempe 111332

OTIEC OSHA 7500 -Introduction to Safety & Health Management Jun 21 Tempe 111333

OTIEC OSHA 7405 - Fall Hazard Awareness for the Construction Industry Jun 22 Tempe 111334

OTIEC OSHA 7845 - Recordkeeping Rule Seminar Jun 23 Tempe 111335

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Jun 27-29 Tempe 111376

OTIEC OSHA 2015 - Hazardous Materials Jun 27-30 Tempe 112227

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Jul 11-13 Tempe 111378

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jul 18-21 Tempe 111379

OTIEC OSHA 2045 - Machinery and Machine Guarding Standards Jul 25-28 Tempe 111380

OTIEC OSHA 511 - OS&H Standards for General Industry Aug 1-4 Tempe 111381

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Aug 8-11 Tempe 111382

UCSD Trainer Course - Forklift Safety Aug 15-16 Tempe 111383

UCSD Electrical Safety Standards -NFPA 70E- 2 Day Aug 17-18 Tempe 111384

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Aug 22-25 Tempe 111388

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Aug 29-31 Tempe 111389


At-A

-Glance (by location)

2016 Courses At-A-Glance, by Location



UCSD Scaffolding Sep 7-9 Tempe 111385

UCSD Trainer Course - Rigging Safety Sep 12-15 Tempe 111386

UCSD EM385-1-1 40 Hour Safety Sep 19-23 Tempe 111924

OTIEC OSHA 3115 - Fall Protection Sep 26-29 Tempe 111390

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Oct 3-6 Tempe 111391

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Oct 10-12 Tempe 111392

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 24-26 Tempe 111394

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Oct 31-Nov 3 Tempe 111395

OTIEC OSHA 3095 - Electrical Standards (Low Voltage Federal) Nov 7-10 Tempe 111396

OTIEC OSHA 511 - OS&H Standards for General Industry Nov 14-17 Tempe 111397

OTIEC OSHA 6000 - Collateral Duty Course for other Federal Employees Nov 28-Dec 1 Tempe 111398

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Dec 5-8 Tempe 111400

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Mar 7-10 Tucson 111921

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 4-7 Tucson 111929

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers May 23-25 Tucson 111952

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 13-16 Tucson 111956

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 18-21 Tucson 111960

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Sep 7-9 Tucson 111972

OTIEC OSHA 7505 - Introduction to Accident Investigation Oct 31-Nov 1 Tucson 111982

OTIEC OSHA 510 - OS&H Standards for the Construction Industry Jan 25-28 Waipahu 112116

OTIEC OSHA 502 - Update for Construction Industry Outreach Trainers Feb 22-24 Waipahu 112125

OTIEC OSHA 5402 - Maritime Industry Trainer Update Course Mar 21-22 Waipahu 112129

OTIEC OSHA 500 - Trainer Course in OS&H for the Construction Industry Apr 4-7 Waipahu 112131

OTIEC OSHA 511 - OS&H Standards for General Industry Jun 20-23 Waipahu 112136

OTIEC OSHA 501 - Trainer Course in OS&H for General Industry Jul 18-21 Waipahu 112139

OTIEC OSHA 2225 - Respiratory Protection Aug 15-18 Waipahu 112141

UCSD Scaffolding Sep 12-14 Waipahu 112143

OTIEC OSHA 503 - Update for General Industry Outreach Trainers Oct 10-12 Waipahu 112145

OTIEC OSHA 3115 - Fall Protection Nov 7-10 Waipahu 112150

OTIEC OSHA 3015 - Excavation, Trenching and Soil Mechanics Dec 5-7 Waipahu 112155


At-

A-G

lanc

e (b

y lo

cati

on)

For a PDF version of the

At-A-Glance by date

and/or by location please

visit osha.ucsd.edu

U .S . Army CP-12 Program

A part of the Department of the Army Civilian (DAC) career programs, the Army Safety and Occupational Health Career Management Program (CP-12) was designed to provide the Army with the well qualified, trained, and led Civilian Safety and Occupational Health professionals needed to meet the Army’s current and future needs.Some of UCSD’s OTIEC courses will meet the requirements of this rigorous program:• OSHA 510 • OSHA 2015 • OSHA 2264• OSHA 511 • OSHA 225 • OSHA 3095• OSHA 521For more information on the CP-12 program, visit safety.army.mil/CP-12

OSHA Training on Oahu

Authorized OSHA numbered courses are avail-able in our Hawaii classroom–conveniently located minutes from the Honolulu International Airport, world famous Waikiki Beach and the legendary North Shore.

HonoluluConstruction Training Centerof the Pacific94-487 Akoki StreetWaipahu, HI 96797

29 ( 8 0 0 ) 3 5 8 - 9 2 0 6 • o s h a . u c s d . e d u

$

$

$

$

o VISA/MASTERCARD/DISCOVER CARD/AMERICAN EXPRESS o CASH/PERSONAL CHECK (PAYABLE TO UC REGENTS) o PURCHASE ORDER (MUST BE ATTACHED)

– –

NAME

ADDRESS

CITY

PHONE

EMAIL

STATE ZIP

LAST FIRST M.I.

DAY ALTERNATE

CARD NUMBER

EXP DATE CARD CODE SIGNATURE OF CARD HOLDER

COURSE TITLE SECTION ID CREDIT OPTION (CHECK ONE) FEE

o ACADEMIC (PASS/NO PASS) o NO GRADEo ACADEMIC (LETTER GRADE)



NAME OF EMPLOYER

ENROLLMENT FORM

o MS. o MRS. o MISS o MR. o DR.STUDENT I.D./PID #

PLEASE PROVIDE YOUR PRIORITY CODE BY REFERRING TO THE FIRST THREE DIGITS OF THE NUMBER ON THE TOP OF YOUR MAILING LABEL (RIGHT ABOVE THE NAME)

TOTAL FEES (MAKE CHECK PAYABLE TO UC REGENTS)

Enrolling is Easy

Web: osha.ucsd.edu

Mail: OSHA Training Institute

UCSD Extension 404 Camino del Rio South,

Suite 102 San Diego, CA 92108

Phone: (800) 358-9206

Fax: (619) 294-3861

PAYMENT METHOD (FULL PAYMENT MUST ACCOMPANY THIS FORM)

ADDITIONAL INFORMATION

– – –

FOR OSHA 500, 501, 502, 503, 5029, 5039, 5400, 5402, 5600 and 5602You must be approved to take these courses. To obtain a Verification of Enrollment:

• Please download the form from the OSHA 500, OSHA 501, OSHA 502, OSHA 503, OSHA 5029, OSHA 5039, OSHA 5400, OSHA 5402, OSHA 5600 and OSHA 5602 course pages at OSHA.UCSD.EDU

• Request by email at [email protected]

• Or call (800) 358-9206

If you have been approved, please provide us with the date of your approval.Approval Date: ________________________________

REFUND POLICY

• Cancellations must be made at least two weeks prior to the course start date to be eligible for a refund.

• Transfer requests prior to two weeks will be honored.

• Transfers within the two weeks prior to the course start date will be allowed one time only.

• Students who do not show up for class and do not call will not be refunded or transferred to another section.

PURCHASE ORDER ENROLLMENTSAll purchase orders must be provided on company letter-head. Faxed POs will be accepted; however, the original PO must be received in our office at the address above within five business days from the date the fax was received. Individuals with questions regarding purchase orders should telephone (858) 534-3117. UCSD Extension requires the fol-lowing information on all purchase orders submitted:

• Company’s complete name and address

• Purchase order number

• Invoicing address and telephone number

• Point of contact (name, email and telephone number)

• Student’s name, social security number, telephone number, mailing address and email

• Section ID number, course title, course dates, and course fee

• Authorizing signature(s)

• Payment terms are net 30 days


Enrollment Form

OCCUPATIONAL SAFETY AND HEALTH DEPARTMENT

Non-Profit Org.U.S. PostagePAIDSan Diego, CAPermit No. 1909

Not Printed at State Expense SU15

-100

2

Cert no. XXX-XXX-000

9500 Gilman Dr., Dept. 0170-MLa Jolla, CA 92093-0170

Earn Your UC San Diego Hard Hat! See page 5 for more details.

OCCUPATIONAL SAFETY AND HEALTH DEPARTMENT

The UCSD Professional Certificate in Occupational Safety and Health provides experienced safety professionals important workplace knowledge and practical experience regarding safety and safety standards. Professional Certificates offer concentrated study in areas directly applicable to many jobs and can add breadth and depth to existing knowledge and skills. You can elect a single certificate in Construction or General Industry, or a Dual Certificate in both areas.

The Safety Specialist Certificate was designed by the Occupational Safety and Health Department at UC San Diego Extension and the Associated Builders and Contractors, San Diego Chapter (ABC). It is an intensive, cohort-based program that combines in-class education with associated skills practice. Included in the certificate program topics are all items necessary for individuals to prepare for entry-level safety jobs in the construction industry, including an on-the-job internship.

Safety Specialist Certificate

The Public Sector Safety and Health Fundamentals Certificate Program supports OSHA’s mission by training public sector employees in occupational safety and health to reduce incident rates for workers in state and local governments (the certificate program is highly applicable to private industry workers as well).

Participants can choose from a variety of topics such as occupational safety and health standards for construction or general industry, safety and health management, accident investigation, fall hazard awareness, and recordkeeping.

Home of the TRAINING INSTITUTEEDUCATION CENTER

For more information on Certificate Programs, see page 6 or visit osha .ucsd .edu

Professional Certificate Fundamentals Certificate


Documents

2016 COURSE SCHEDULE - OSHA Training Institute · 2016 COURSE . SCHEDULE. TRAINING INSTITUTE EDUCATION CENTER Home of the. ia a na i. B. UC San Diego Extension (800) 358-9206 •