2015 Yukon Denali Owner Manual

2k15_gmc_yukon_den_22953643A.ai

(Modern Bridge - Level 2 / #23321109)

Spine = Printer Adjust

(Image set @ 60% Transparency

Color = Black

Date = 11/20/13

Black plate (1,1)GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7063681) - 2015 - 1st Edition - 11/25/13

2015 GMC Yukon Denali/Yukon XL Denali Owner Manual M

In Brief . . . . . . . . . . . . . . . . . . . . . . . . 1-1Instrument Panel . . . . . . . . . . . . . . 1-2Initial Drive Information . . . . . . . . 1-4Vehicle Features . . . . . . . . . . . . . 1-17Performance andMaintenance . . . . . . . . . . . . . . . . 1-21

Keys, Doors, andWindows . . . . . . . . . . . . . . . . . . . . 2-1Keys and Locks . . . . . . . . . . . . . . . 2-1Doors . . . . . . . . . . . . . . . . . . . . . . . . 2-17Vehicle Security. . . . . . . . . . . . . . 2-22Exterior Mirrors . . . . . . . . . . . . . . . 2-26Interior Mirrors . . . . . . . . . . . . . . . . 2-28Windows . . . . . . . . . . . . . . . . . . . . . 2-29Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31

Seats and Restraints . . . . . . . . . 3-1Head Restraints . . . . . . . . . . . . . . . 3-2Front Seats . . . . . . . . . . . . . . . . . . . . 3-3Rear Seats . . . . . . . . . . . . . . . . . . . . 3-9Safety Belts . . . . . . . . . . . . . . . . . . 3-16Airbag System . . . . . . . . . . . . . . . . 3-25Child Restraints . . . . . . . . . . . . . . 3-38

Storage . . . . . . . . . . . . . . . . . . . . . . . 4-1Storage Compartments . . . . . . . . 4-1Additional Storage Features . . . 4-3Roof Rack System . . . . . . . . . . . . . 4-4

Instruments and Controls . . . . 5-1Controls . . . . . . . . . . . . . . . . . . . . . . . 5-2Warning Lights, Gauges, andIndicators . . . . . . . . . . . . . . . . . . . . 5-9

Information Displays . . . . . . . . . . 5-29Vehicle Messages . . . . . . . . . . . . 5-36Vehicle Personalization . . . . . . . 5-49Universal Remote System . . . . 5-56

Lighting . . . . . . . . . . . . . . . . . . . . . . . 6-1Exterior Lighting . . . . . . . . . . . . . . . 6-1Interior Lighting . . . . . . . . . . . . . . . . 6-6Lighting Features . . . . . . . . . . . . . . 6-7

Infotainment System . . . . . . . . . 7-1Introduction . . . . . . . . . . . . . . . . . . . . 7-1

Climate Controls . . . . . . . . . . . . . 8-1Climate Control Systems . . . . . . 8-1Air Vents . . . . . . . . . . . . . . . . . . . . . . . 8-6Maintenance . . . . . . . . . . . . . . . . . . . 8-7

Driving and Operating . . . . . . . . 9-1Driving Information . . . . . . . . . . . . . 9-2Starting and Operating . . . . . . . 9-19Engine Exhaust . . . . . . . . . . . . . . 9-27Automatic Transmission . . . . . . 9-28Drive Systems . . . . . . . . . . . . . . . . 9-33Brakes . . . . . . . . . . . . . . . . . . . . . . . 9-38Ride Control Systems . . . . . . . . 9-41Cruise Control . . . . . . . . . . . . . . . . 9-45Driver Assistance Systems . . . 9-55Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 9-67Trailer Towing . . . . . . . . . . . . . . . . 9-71Conversions and Add-Ons . . . 9-85


2015 GMC Yukon Denali/Yukon XL Denali Owner Manual M

Vehicle Care . . . . . . . . . . . . . . . . . 10-1General Information . . . . . . . . . . 10-2Vehicle Checks . . . . . . . . . . . . . . . 10-3Headlamp Aiming . . . . . . . . . . . 10-29Bulb Replacement . . . . . . . . . . 10-30Electrical System . . . . . . . . . . . . 10-32Wheels and Tires . . . . . . . . . . . 10-43Jump Starting . . . . . . . . . . . . . . . 10-75Towing the Vehicle . . . . . . . . . . 10-78Appearance Care . . . . . . . . . . . 10-82

Service and Maintenance . . . 11-1General Information . . . . . . . . . . 11-1Maintenance Schedule . . . . . . . 11-3Special ApplicationServices . . . . . . . . . . . . . . . . . . . . 11-8

Additional Maintenanceand Care . . . . . . . . . . . . . . . . . . . . 11-8

Recommended Fluids,Lubricants, and Parts . . . . . . 11-12

Maintenance Records . . . . . . . 11-15Technical Data . . . . . . . . . . . . . . . 12-1Vehicle Identification . . . . . . . . . 12-1Vehicle Data . . . . . . . . . . . . . . . . . . 12-2

Customer Information . . . . . . . 13-1Customer Information . . . . . . . . 13-1Reporting Safety Defects . . . . 13-13Vehicle Data Recording andPrivacy. . . . . . . . . . . . . . . . . . . . 13-14

OnStar . . . . . . . . . . . . . . . . . . . . . . . 14-1OnStar Overview. . . . . . . . . . . . . 14-1OnStar Services . . . . . . . . . . . . . . 14-2OnStar AdditionalInformation . . . . . . . . . . . . . . . . . . 14-6

Index . . . . . . . . . . . . . . . . . . . . . i-1


Introduction iii

The names, logos, emblems,slogans, vehicle model names, andvehicle body designs appearing inthis manual including, but not limitedto, GM, the GM logo, GMC, theGMC Truck Emblem, YUKON, andDENALI are trademarks and/orservice marks of General MotorsLLC, its subsidiaries, affiliates,or licensors.For vehicles first sold in Canada,substitute the name GeneralMotors of Canada Limited for GMCwherever it appears in this manual.

This manual describes features thatmay or may not be on the vehiclebecause of optional equipment thatwas not purchased on the vehicle,model variants, countryspecifications, features/applicationsthat may not be available in yourregion, or changes subsequent tothe printing of this owner manual.Refer to the purchasedocumentation relating to yourspecific vehicle to confirm thefeatures.Keep this manual in the vehicle forquick reference.

Canadian Vehicle Owners

Propritaires Canadiens

A French language manual can beobtained from your dealer, atwww.helminc.com, or from:On peut obtenir un exemplaire dece guide en franais auprs duconcessionnaire ou l'adressesavant:Helm, IncorporatedAttention: Customer Service47911 Halyard DrivePlymouth, MI 48170

Using this ManualTo quickly locate information aboutthe vehicle, use the Index in theback of the manual. It is analphabetical list of what is in themanual and the page number whereit can be found.

Litho in U.S.A.Part No. 22953643 A First Printing 2013 General Motors LLC. All Rights Reserved.


iv Introduction

Danger, Warnings, andCautions

{ DangerText marked{ Danger providesinformation on risk of fatal injury.Disregarding this information mayendanger life.

{ WarningText marked{ Warning providesinformation on risk of accident orinjury. Disregarding thisinformation may lead to injury.

{ CautionText marked{ Caution providesinformation that may indicate ahazard that could result in injuryor death. It could also result inpossible damage to the vehicle.

A circle with a slash through it is asafety symbol which means DoNot, Do not do this, or Do not letthis happen.

SymbolsThe vehicle has components andlabels that use symbols instead oftext. Symbols are shown along withthe text describing the operation orinformation relating to a specificcomponent, control, message,gauge, or indicator.M : This symbol is shown whenyou need to see your owner manualfor additional instructions orinformation.* : This symbol is shown whenyou need to see a service manualfor additional instructions orinformation.


Introduction v

Vehicle Symbol Chart

Here are some additional symbolsthat may be found on the vehicleand what they mean. For moreinformation on the symbol, refer tothe Index.0 : Adjustable Pedals9 : Airbag Readiness Light! : Antilock Brake System (ABS)g : Audio Steering Wheel Controlsor OnStar (if equipped)$ : Brake System Warning Light" : Charging SystemI : Cruise ControlB : Engine Coolant Temperature

O : Exterior Lamps# : Fog Lamps. : Fuel Gauge+ : Fuses3 : Headlamp High/Low-BeamChanger( : Heated Steering Wheelj : LATCH System ChildRestraints* : Malfunction Indicator Lamp: : Oil Pressureg : Outside Power FoldawayMirrorsO : Power

/ : Remote Vehicle Start> : Safety Belt Reminders7 : Tire Pressure Monitor_ : Tow/Haul Moded : Traction Control/StabiliTrak

M : Windshield Washer Fluid


vi Introduction

2 NOTES


In Brief 1-1

In Brief

Instrument PanelInstrument Panel . . . . . . . . . . . . . . 1-2

Initial Drive InformationInitial Drive Information . . . . . . . . 1-4Remote Keyless Entry (RKE)System . . . . . . . . . . . . . . . . . . . . . . 1-4

Remote Vehicle Start . . . . . . . . . 1-5Door Locks . . . . . . . . . . . . . . . . . . . 1-5Liftgate . . . . . . . . . . . . . . . . . . . . . . . . 1-6Windows . . . . . . . . . . . . . . . . . . . . . . 1-7Seat Adjustment . . . . . . . . . . . . . . 1-8Memory Features . . . . . . . . . . . . . 1-8Second Row Seats . . . . . . . . . . . 1-9Third Row Seats . . . . . . . . . . . . . . 1-9Heated and Cooled FrontSeats . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Head Restraint Adjustment . . . . 1-9Safety Belts . . . . . . . . . . . . . . . . . . 1-10

Passenger SensingSystem . . . . . . . . . . . . . . . . . . . . . 1-10

Mirror Adjustment . . . . . . . . . . . . 1-10Steering WheelAdjustment . . . . . . . . . . . . . . . . . 1-11

Throttle and Brake PedalAdjustment . . . . . . . . . . . . . . . . . 1-12

Interior Lighting . . . . . . . . . . . . . . 1-12Exterior Lighting . . . . . . . . . . . . . 1-13Windshield Wiper/Washer . . . . 1-14Climate Controls . . . . . . . . . . . . . 1-15Transmission . . . . . . . . . . . . . . . . 1-15Four-Wheel Drive . . . . . . . . . . . . 1-16

Vehicle FeaturesInfotainment System . . . . . . . . . 1-17Steering Wheel Controls . . . . . 1-17Cruise Control . . . . . . . . . . . . . . . 1-17Driver InformationCenter (DIC) . . . . . . . . . . . . . . . 1-18

Forward Collision Alert (FCA)System . . . . . . . . . . . . . . . . . . . . . 1-18

Lane DepartureWarning (LDW) . . . . . . . . . . . . . 1-18

Lane Change Alert (LCA) . . . . 1-19Rear VisionCamera (RVC) . . . . . . . . . . . . . 1-19

Parking Assist . . . . . . . . . . . . . . . 1-19Active Emergency BrakingSystem . . . . . . . . . . . . . . . . . . . . . 1-19

Power Outlets . . . . . . . . . . . . . . . 1-19Universal Remote System . . . 1-20Sunroof . . . . . . . . . . . . . . . . . . . . . . 1-20Performance and MaintenanceTraction Control/ElectronicStability Control . . . . . . . . . . . . 1-21

Tire Pressure Monitor . . . . . . . . 1-21Engine Oil Life System . . . . . . 1-22Driving for Better FuelEconomy . . . . . . . . . . . . . . . . . . . 1-22

Roadside AssistanceProgram . . . . . . . . . . . . . . . . . . . . 1-23

OnStar . . . . . . . . . . . . . . . . . . . . . 1-23


1-2 In Brief

Instrument Panel


In Brief 1-3

1. Air Vents on page 8-6.2. Head-Up Display (HUD) on

page 5-32.

3. g Traction Control/ElectronicStability Control on page 9-41.

j Power Assist Steps onpage 2-21 (If Equipped).X Parking Assist Button (IfEquipped). See AssistanceSystems for Parking or Backingon page 9-56.

@ Lane Departure Warning(LDW) on page 9-65 (IfEquipped).0 Pedal Adjust Switch (IfEquipped). See AdjustableThrottle and Brake Pedal onpage 9-19.

4. Turn Signal Lever. See Turn andLane-Change Signals onpage 6-4.

Windshield Wiper/Washer onpage 5-3.

5. Favorite Switches (Out of View).See Steering Wheel Controls onpage 5-2.

Volume Switches (Out of View).See Steering Wheel Controls onpage 5-2.

6. Hazard Warning Flashers onpage 6-4.

7. Instrument Cluster on page 5-10.8. Shift Lever. See Automatic

Transmission on page 9-28.

Tow/Haul Selector Button (IfEquipped). See Tow/Haul Modeon page 9-32.

Range Selection Mode (IfEquipped). See Manual Mode onpage 9-31.

9. Light Sensor. See AutomaticHeadlamp System on page 6-3.

10. Infotainment on page 7-1.11. Instrument Panel Illumination

Control on page 6-6.

12. Exterior Lamp Controls onpage 6-1.

Fog Lamps on page 6-5 (IfEquipped).

13. Parking Brake on page 9-39.14. Automatic Transfer Case Knob

(If Equipped). See Four-WheelDrive on page 9-33.

15. Data Link Connector (DLC)(Out of View). See MalfunctionIndicator Lamp on page 5-19.

16. Trailer Brake Control Panel.See Towing Equipment onpage 9-78.

17. Cruise Control on page 9-45.Adaptive Cruise Control onpage 9-48 (If Equipped).Forward Collision Alert (FCA)System on page 9-59 (IfEquipped).

18. Steering Wheel Adjustment onpage 5-2.

19. Horn on page 5-3.


1-4 In Brief

20. Steering Wheel Controls onpage 5-2.

21. Ignition Positions onpage 9-20.

22. Driver and Passenger Heatedand Cooled Front SeatButtons. See Heated andCooled Front Seats onpage 3-7.

23. Rear Climate Control Buttons.See Rear Climate ControlSystem on page 8-5.

24. Dual Automatic Climate ControlSystem on page 8-1

Initial DriveInformationThis section provides a briefoverview about some of theimportant features that may or maynot be on your specific vehicle.For more detailed information, referto each of the features which can befound later in this owner manual.

Remote Keyless Entry(RKE) SystemThe RKE transmitter is used toremotely lock and unlock the doorsfrom up to 60 m (197 ft) away fromthe vehicle.

Key Access RKE Transmitter withRemote Start


In Brief 1-5

Keyless Access RKE Transmitterwith Remote Start

K : Press to unlock the driver door.Press K again within three secondsto unlock all remaining doors.Q : Press to lock all doors.Lock and unlock feedback can bepersonalized. See VehiclePersonalization on page 5-49.

b : Press twice to open or closethe liftgate. Press once to stop theliftgate from moving.c : Press twice to open theliftglass.

7 : Press and release to locate thevehicle.

Press 7 and hold for more thanthree seconds to sound the panicalarm.

Press 7 again to cancel the panicalarm.See Keys on page 2-1 and RemoteKeyless Entry (RKE) System onpage 2-4.

Remote Vehicle StartIf equipped, the engine can bestarted from outside of the vehicle.Starting the Vehicle

1. Press and release Q.

2. Immediately, press and hold /for at least four seconds or untilthe turn signal lamps flash.

When the vehicle starts, the parkinglamps will turn on. The doors will belocked and the climate controlsystem may come on.

The engine will continue to run for10 minutes. Repeat the steps for a10-minute time extension. Remotestart can be extended only once.Canceling a Remote Start

To cancel a remote start, do one ofthe following:. Press and hold/ until the

parking lamps turn off.. Turn on the hazard warning

flashers.. Turn the vehicle on and then off.See Remote Vehicle Start onpage 2-13.

Door LocksTo lock or unlock the doors frominside the vehicle:. Press Q or K on a power door

lock switch.


1-6 In Brief

. Pushing down the manual lockknob on the driver door will lockall doors. Pushing down the lockknob on a passenger door willlock that door only.

. Pulling the door handle once willunlock that door. Pulling thehandle again will unlatch it.

To lock or unlock the doors fromoutside the vehicle press Q or K onthe RKE transmitter. See RemoteKeyless Entry (RKE) SystemOperation (Keyless Access) onpage 2-7 or Remote Keyless Entry(RKE) System Operation (KeyAccess) on page 2-4.

Power Door Locks

Q : Press to lock the doors.K : Press to unlock the doors.See Door Locks on page 2-14.Keyless Access

If equipped with Keyless Access,the RKE transmitter must be within1 m (3 ft) of the driver door.Pressing the button on the driverdoor handle will unlock the driverdoor. If the handle button is pressedagain within five seconds, the

passenger doors and liftgate willunlock. See Remote Keyless Entry(RKE) System Operation (KeylessAccess) on page 2-7 or RemoteKeyless Entry (RKE) SystemOperation (Key Access) onpage 2-4.

Liftgate

To open the liftgate, press K on thepower door lock switch or press Kon the Remote Keyless Entry (RKE)transmitter twice to unlock all doors.


In Brief 1-7

Press the touch pad on theunderside of the liftgate handle andlift up. See Remote Keyless Entry(RKE) System Operation (KeylessAccess) on page 2-7 or RemoteKeyless Entry (RKE) SystemOperation (Key Access) onpage 2-4.

Use the pull cup to lower and closethe liftgate. Do not press the touchpad while closing the liftgate. Thiswill cause the liftgate to beunlatched.Power Liftgate Operation

If equipped with a power liftgate, theswitch is on the overhead console.The vehicle must be in P (Park).Choose the power liftgate mode byselecting MAX or 3/4. Press8 onthe overhead console. On the RKEtransmitter pressb once, thenagain and hold until the liftgatestarts moving.

Pressing and releasingb while theliftgate is moving stops the liftgate.Pressing again reverses thedirection.

To close, press8 on the bottomof the liftgate next to the latch.To disable the power liftgatefunction, select OFF on the liftgateswitch. See Liftgate on page 2-17.

Windows

The power windows work when theignition is in ON/RUN or ACC/ACCESSORY, or in RetainedAccessory Power (RAP). SeeRetained Accessory Power (RAP)on page 9-24.

If equipped, the front and rearwindows have an express-downfeature. The front windows have anexpress-up feature. See Windowson page 2-29 and Power Windowson page 2-29.


1-8 In Brief

Seat Adjustment

Power Seats

To adjust the seat:. Move the seat forward or

rearward by sliding the controlforward or rearward.

. Raise or lower the front part ofthe seat cushion by moving thefront of the control up or down.

. Raise or lower the seat bymoving the rear of the control upor down.

See Power Seat Adjustment onpage 3-3.

Lumbar Adjustment

To adjust the lumbar support:. Press and hold the control

forward to increase or rearwardto decrease upper and lowerlumbar support at the same time.

. Press and hold the control up toincrease upper lumbar supportand decrease lower lumbarsupport.Press and hold the control downto increase lower lumbar supportand decrease upper lumbarsupport.

See Lumbar Adjustment onpage 3-4.

Memory Features


In Brief 1-9

The SET, "1," "2," andB (Exit)buttons on the driver door are usedto manually save and recall memorysettings for the driver seat, outsidemirrors, power tilt and telescopingsteering column, and adjustablepedals.See Memory Seats on page 3-5 andVehicle Personalization onpage 5-49.

Second Row SeatsThe second row seatbacks can befolded for additional cargo space,or the seats can be folded andtumbled for easy entry/exit to thethird row seats. The seatbacks alsorecline.See Second Row Seats onpage 3-9.

Third Row SeatsThird row seatbacks can be folded.See Third Row Seats on page 3-14.

Heated and Cooled FrontSeats

The buttons are on the center stackbelow the climate control system. Tooperate, the engine must berunning.PressI to heat the driver orpassenger seatback only.Press J to heat the driver orpassenger seat cushion andseatback.

PressA to cool the driver orpassenger seat.See Heated and Cooled Front Seatson page 3-7.

Head RestraintAdjustmentDo not drive until the head restraintsfor all occupants are installed andadjusted properly.To achieve a comfortable seatingposition, change the seatbackrecline angle as little as necessarywhile keeping the seat and the headrestraint height in the properposition.See Head Restraints on page 3-2and Power Seat Adjustment onpage 3-3.


1-10 In Brief

Safety Belts

Refer to the following sections forimportant information on how to usesafety belts properly:. Safety Belts on page 3-16.. How to Wear Safety Belts

Properly on page 3-17.. Lap-Shoulder Belt on page 3-18.. Lower Anchors and Tethers for

Children (LATCH System) onpage 3-46.

Passenger SensingSystem

United States

Canada and Mexico

The passenger sensing system willturn off the front outboardpassenger frontal airbag undercertain conditions. No other airbagis affected by the passengersensing system. See PassengerSensing System on page 3-32

The passenger airbag statusindicator will light on the overheadconsole when the vehicle is started.See Passenger Airbag StatusIndicator on page 5-18.

Mirror Adjustment

Exterior Mirrors

To adjust the mirrors:1. Press (1) or (2) to select the

driver or passenger side mirror.


In Brief 1-11

2. Press the arrows on the controlpad to move each mirror in thedesired direction.

3. Press either (1) or (2) again todeselect the mirror.

To power fold the mirrors:1. Press{ to fold the mirrors

inward.

2. Press{ again to return themirrors to the driving position.

See Power Mirrors on page 2-26.Heated Mirrors

Press1 to heat the mirrors.See Rear Window Defogger underDual Automatic Climate ControlSystem on page 8-1.

Reverse Tilt Mirrors

If equipped, the exterior mirrors tiltto a preselected position when thevehicle is in R (Reverse).See Reverse Tilt Mirrors onpage 2-28.

Interior Mirror

Adjustment

Adjust the mirror to view the areabehind the vehicle.Automatic Dimming RearviewMirror

The mirror automatically reducesthe glare of headlamps from behind.The dimming feature comes onwhen the vehicle is started. SeeAutomatic Dimming Rearview Mirroron page 2-28.

Steering WheelAdjustmentPower Tilt and Telescope SteeringWheel

To adjust the power tilt andtelescope steering wheel,if equipped:Press the control to move thesteering wheel up and down orforward and rearward.Do not adjust the steering wheelwhile driving.


1-12 In Brief

Throttle and Brake PedalAdjustmentIf equipped, the position of thethrottle and brake pedals can bechanged.

The switch used to adjust thepedals is to the left of the steeringwheel.Press the switch to the left to movethe pedals closer to your body.Press the switch to the right to movethe pedals away.

See Adjustable Throttle and BrakePedal on page 9-19.

The vehicle may have a memoryfunction, which lets pedal settingsbe saved and recalled. See MemorySeats on page 3-5.

Interior LightingDome Lamps

There are dome lamps in theoverhead console and the headliner,if equipped.

To change the dome lamp settings,press the following:OFF: Turns the lamps off, evenwhen a door is open.DOOR: The lamps come onautomatically when a door isopened.ON: Turns all dome lamps on.Reading Lamps

There are reading lamps in theoverhead console and the headliner,if equipped. To operate, the ignitionmust be in the ACC/ACCESSORYor ON/RUN position or usingRetained Accessory Power (RAP).


In Brief 1-13

Pressm orn next to each readinglamp to turn it on or off.

Exterior Lighting

The exterior lamp control is on theinstrument panel to the left of thesteering wheel.There are four positions.O : Turns off the automaticheadlamps and Daytime RunningLamps (DRL). Turn the headlampcontrol to the off position again toturn the automatic headlamps orDRL back on.

For vehicles first sold in Canada,the off position will only work whenthe vehicle is shifted into P (Park).AUTO: Automatically turns on theheadlamps, parking lamps,taillamps, instrument panel lights,roof marker lamps (if equipped), andlicense plate lamps.; : Turns on the parking lampsincluding all lamps, except theheadlamps.5 : Turns on the headlamps withthe parking lamps and instrumentpanel lights.See:. Exterior Lamp Controls on

page 6-1. Fog Lamps on page 6-5


1-14 In Brief

Windshield Wiper/Washer

The windshield wiper control is onthe turn signal lever.The windshield wipers are controlledby turning the band withzFRONT on it.1 : Fast wipes.w : Slow wipes.3 INT: Turn thez FRONT bandup for more frequent wipes or downfor less frequent wipes.OFF: Turns the windshieldwipers off.8 : For a single wipe, turn to8,then release. For several wipes,hold the band on8 longer.

L m : Push the paddle at the top ofthe lever to spray washer fluid onthe windshield.Rainsense

With Rainsense, a sensor near thetop center of the windshield detectsthe amount of water on thewindshield and controls thefrequency of the windshield wiper.3 INT : Turn thez FRONTband on the wiper lever to adjust thesensitivity.

. Turn the band up for moresensitivity to moisture.

. Turn the band down for lesssensitivity to moisture.

Move the band out of the3 INTposition to deactivate Rainsense.

z AUTO : Press to turnRainsense on or off. When turnedon andz FRONT is in one of theRainsense wipe sensitivitypositions, the wipers can beadjusted for more or less sensitivityto moisture. When turned off, thewipers operate as timed intermittentwipers and can be adjusted formore or less frequent wipes.See Windshield Wiper/Washer onpage 5-3.


In Brief 1-15

Climate ControlsThis system controls the heating,cooling, and ventilation.

1. Driver Temperature Control2. A/C (Air Conditioning)3. Air Delivery Mode Controls4. Fan Control5. Defrost6. Passenger Temperature Control7. AUTO (Automatic Operation)8. Air Recirculation

9. Rear Climate Control PowerButton

10. Rear AUTO (AutomaticOperation)

11. Front Climate Control PowerButton

12. Rear Fan Control13. Rear Air Delivery Mode Control14. Rear Temperature Control15. RCTRL (Rear Climate Control

Lockout)16. Rear Window Defogger17. SYNC (Synchronized

Temperature)See Dual Automatic Climate ControlSystem on page 8-1 and RearClimate Control System on page 8-5(If Equipped).

Transmission

Range Selection Mode

The Range Selection Mode switch,if equipped, is located on the shiftlever.1. To enable the Range Selection

feature, move the column shiftlever to the M (Manual) position.The current range will appearnext to the M. This is the highestattainable range with all lowergears accessible. As anexample, when 5 (Fifth) gear isselected, 1 (First) through5 (Fifth) gears are available.


1-16 In Brief

2. Press the plus/minus buttons,located on the steering columnshift lever, to select the desiredrange of gears for current drivingconditions. See Manual Mode onpage 9-31.

While using Range Selection Mode,cruise control and the Tow/HaulMode can be used.Grade Braking is not available whenRange Selection Mode is active.See Tow/Haul Mode on page 9-32.

Four-Wheel DriveIf the vehicle has Four-Wheel Drive,you can send the engine's drivingpower to all four wheels for extratraction.

Automatic Transfer Case

Two Speed Transfer Case

Single Speed Transfer Case

The transfer case knob is to the leftof the instrument cluster. Use thisknob to shift into and out of thedifferent Four-Wheel Drive modes.

2 m : This setting is used for drivingin most street and highwaysituations.AUTO: This setting is ideal for usewhen road surface tractionconditions are variable.Do not use AUTO mode to park ona steep grade with poor tractionsuch as ice, snow, mud or gravel. InAUTO mode only the rear wheelswill hold the vehicle from slidingwhen parked. If parking on a steepgrade, use 4 m to keep all fourwheels engaged.4 m : Use the Four-Wheel DriveHigh position when extra traction isneeded, such as on snowy or icyroads or in most off-road situations.


In Brief 1-17

4 n : Vehicles with a two speedtransfer case have a Four-WheelDrive Low position. This settingsends maximum power to all fourwheels. You might chooseFour-Wheel Drive Low if you aredriving off-road in deep sand, mud,or snow, and while climbing ordescending steep hills.N (Neutral): Vehicles with a twospeed transfer case have aN (Neutral) position. Shift thetransfer case to N (Neutral) onlywhen towing the vehicle. SeeRecreational Vehicle Towing onpage 10-78 or Towing the Vehicleon page 10-78.

See Four-Wheel Drive onpage 9-33.

Vehicle Features

Infotainment SystemSee the infotainment manual forinformation on the radio, audioplayers, phone, navigation system,and voice or speech recognition.It also includes information onsettings.

Steering Wheel ControlsThe infotainment system can beoperated by using the steeringwheel controls. See "SteeringWheel Controls" in the infotainmentmanual.

Cruise Control

5 : Press to turn the system on oroff. The indicator light is white whencruise control is on and turns offwhen cruise control is off.SET : Press briefly to set thespeed and activate cruise control.If cruise control is already active,use to decrease vehicle speed.


1-18 In Brief

+ RES: If there is a set speed inmemory press to resume that speedor press and hold to accelerate.If cruise control is already active,use to increase vehicle speed.* : Press to disengage cruisecontrol without erasing the setspeed from memory.See Cruise Control on page 9-45 orAdaptive Cruise Control onpage 9-48 (If Equipped).

Driver InformationCenter (DIC)The DIC display is in the instrumentcluster. It shows the status of manyvehicle systems.

w orx : Press to move up ordown in a list.o or p : Press to move betweenthe interactive display zones in thecluster.V : Press to open a menu or selecta menu item. Press and hold toreset values on certain screens.See Driver Information Center (DIC)on page 5-29.

Forward Collision Alert(FCA) SystemIf equipped, FCA may help avoid orreduce the harm caused byfront-end crashes. FCA provides agreen indicator,V, when a vehicleis detected ahead. This indicatordisplays amber if you follow anothervehicle much too closely. Whenapproaching a vehicle ahead tooquickly, FCA provides a red flashingalert on the windshield and rapidlybeeps or pulses the driver seat.See Forward Collision Alert (FCA)System on page 9-59.

Lane DepartureWarning (LDW)If equipped, LDW is intended to helpavoid unintentional lane departuresat speeds of 56 km/h (35 mph) orgreater. LDW uses a camera sensorto detect the lane markings. TheLDW indicator, @, appears green ifa lane marking is detected. If thevehicle departs the lane, the


In Brief 1-19

indicator will change to amber andflash. In addition, the driver seat willpulse or beeps will sound.See Lane Departure Warning (LDW)on page 9-65.

Lane Change Alert (LCA)If equipped, the LCA system is alane-changing aid that assistsdrivers with avoiding lane changecrashes that occur with vehicles inthe side blind zone (or spot) areasor with vehicles rapidly approachingthese areas from behind. The LCAwarning display will light up in thecorresponding outside side mirrorand will flash if the turn signal is on.The Side Blind Zone Alert (SBZA)system is included as part of theLCA system.See Side Blind Zone Alert (SBZA)on page 9-62 and Lane ChangeAlert on page 9-63.

Rear VisionCamera (RVC)If equipped, the RVC displays aview of the area behind the vehicle,on the center stack display, whenthe vehicle is shifted intoR (Reverse).See Assistance Systems for Parkingor Backing on page 9-56.

Parking AssistIf equipped, Rear Parking Assist(RPA) uses sensors on the rearbumper to assist with parking andavoiding objects while inR (Reverse). It operates at speedsless than 8 km/h (5 mph). RPA maydisplay a warning triangle on theRear Vision Camera screen and agraphic on the instrument cluster toprovide the object distance. Inaddition, multiple beeps or seatpulses may occur if very close to anobject.

The vehicle may also have the FrontParking Assist system.See Assistance Systems for Parkingor Backing on page 9-56.

Active EmergencyBraking SystemIf the vehicle has Adaptive CruiseControl (ACC) it also has the ActiveEmergency Braking System, whichincludes the Automatic CollisionPreparation (ACP) System. Thesesystems can automatically brake thevehicle to help avoid or lessen theseverity of crashes while movingforward.See Active Emergency BrakingSystem on page 9-61.

Power OutletsAccessory power outlets can beused to plug in electrical equipment,such as a cell phone, MP3player, etc.


1-20 In Brief

The vehicle may have up to fiveaccessory power outlets:Vehicles with a Center Console. One in front of the cupholders on

the center console.. One inside the center storage

console.. One on the rear of the center

storage console.. One in the third row seat on the

driver side.. One in the rear cargo area on

the passenger side.Vehicles with Bench Seats. One on the center stack below

the climate control system.. One or two in the storage area

on the bench seat.. One in the third row seat area on

the driver side.. One in the rear cargo area on

the passenger side.

Lift the cover to access and replacewhen not in use.See Power Outlets on page 5-6.

Universal Remote System

If equipped with the UniversalRemote system, these buttons willbe in the front overhead console.This system provides a way toreplace up to three remote controltransmitters used to activatedevices such as garage dooropeners, security systems, andhome automation devices.See Universal Remote System onpage 5-56.

Sunroof

1. Open or Close2. VentOn vehicles with a sunroof, thesunroof only operates when theignition is in ACC/ACCESSORY orON/RUN, or when RetainedAccessory Power (RAP) is active.See Retained Accessory Power(RAP) on page 9-24.

Vent: From the closed position,press the rear of switch (2) to ventthe sunroof.


In Brief 1-21

Open/Close: To open the sunroof,press and hold switch (1) until thesunroof reaches the desiredposition. Press and hold the front ofswitch (1) to close it.Express-Open/Express-Close: Toexpress-open the sunroof, fullypress and release the rear ofswitch (1) until the sunroof reachesthe desired position. Toexpress-close the sunroof, fullypress and release the front ofswitch (1). Press the switch again tostop it.When the sunroof is opened, an airdeflector will automatically raise.The air deflector will retract whenthe sunroof is closed.The sunroof also has a sunshadewhich can be pulled forward to blocksun rays. The sunshade must beopened and closed manually.If an object is in the path of thesunroof while it is closing, theanti-pinch feature will detect theobject and stop the sunroof.See Sunroof on page 2-31.

Performance andMaintenance

Traction Control/Electronic StabilityControlThe vehicle has a traction controlsystem that limits wheel spin andthe StabiliTrak system that assistswith directional control of the vehiclein difficult driving conditions. Bothsystems come on automaticallywhen the vehicle is started andbegins to move.. To turn off traction control, press

and release g on the instrumentpanel to the left of the steeringwheel. The traction off light idisplays in the instrumentcluster. The appropriate DICmessage displays. See RideControl System Messages onpage 5-43.

. To turn off both traction controland StabiliTrak, press andhold g until i and g illuminatein the instrument cluster and theappropriate DIC messagedisplays. See Ride ControlSystem Messages on page 5-43.

. Press and release g again toturn on both systems.

. StabiliTrak will automatically turnon if the vehicle exceeds56 km/h (35 mph). Tractioncontrol will remain off.

See Traction Control/ElectronicStability Control on page 9-41.

Tire Pressure MonitorThis vehicle may have a TirePressure Monitor System (TPMS).


1-22 In Brief

The low tire pressure warning lightalerts to a significant loss inpressure of one of the vehicle'stires. If the warning light comes on,stop as soon as possible and inflatethe tires to the recommendedpressure shown on the Tire andLoading Information label. SeeVehicle Load Limits on page 9-14.The warning light will remain on untilthe tire pressure is corrected.The low tire pressure warning lightmay come on in cool weather whenthe vehicle is first started, and thenturn off as the vehicle is driven. Thismay be an early indicator that thetire pressures are getting low andthe tires need to be inflated to theproper pressure.The TPMS does not replace normalmonthly tire maintenance. Maintainthe correct tire pressures.See Tire Pressure Monitor Systemon page 10-52.

Engine Oil Life SystemThe engine oil life system calculatesengine oil life based on vehicle useand displays a DIC message whenit is necessary to change the engineoil and filter. The oil life systemshould be reset to 100% onlyfollowing an oil change.Resetting the Oil Life System

1. Display OIL LIFE REMAININGon the DIC. See DriverInformation Center (DIC) onpage 5-29.

2. Press and hold V for severalseconds. The oil life will changeto 100%.

The oil life system can also be resetas follows:1. Turn the ignition to ON/RUN with

the engine off.2. Fully press the accelerator pedal

slowly three times withinfive seconds.

3. Display the OIL LIFEREMAINING on the DIC. If thedisplay shows 100%, the systemis reset.

See Engine Oil Life System onpage 10-9.

Driving for Better FuelEconomyDriving habits can affect fuelmileage. Here are some driving tipsto get the best fuel economypossible.. Avoid fast starts and accelerate

smoothly.. Brake gradually and avoid

abrupt stops.. Avoid idling the engine for long

periods of time.. When road and weather

conditions are appropriate, usecruise control.

. Always follow posted speedlimits or drive more slowly whenconditions require.


In Brief 1-23

. Keep vehicle tires properlyinflated.

. Combine several trips into asingle trip.

. Replace the vehicle's tires withthe same TPC Spec numbermolded into the tire's sidewallnear the size.

. Follow recommended scheduledmaintenance.

Roadside AssistanceProgramU.S.: 1-888-881-3302TTY Users (U.S. Only):1-888-889-2438Canada: 1-800-268-6800New GMC owners are automaticallyenrolled in the Roadside AssistanceProgram.See Roadside Assistance Programon page 13-5.

OnStar

This vehicle may be equipped with acomprehensive, in-vehicle systemthat can connect to a live OnStarAdvisor for Emergency, Security,Navigation, Connection, andDiagnostic Services. OnStarservices may require a paidsubscription. See OnStar Overviewon page 14-1.


1-24 In Brief

2 NOTES


Keys, Doors, and Windows 2-1

Keys, Doors, andWindows

Keys and LocksKeys . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Remote Keyless Entry (RKE)System . . . . . . . . . . . . . . . . . . . . . . 2-4

Remote Keyless Entry (RKE)System Operation (KeyAccess) . . . . . . . . . . . . . . . . . . . . . 2-4

Remote Keyless Entry (RKE)System Operation (KeylessAccess) . . . . . . . . . . . . . . . . . . . . . 2-7

Remote Vehicle Start . . . . . . . . 2-13Door Locks . . . . . . . . . . . . . . . . . . 2-14Power Door Locks . . . . . . . . . . . 2-15Delayed Locking . . . . . . . . . . . . . 2-16Automatic Door Locks . . . . . . . 2-16Lockout Protection . . . . . . . . . . . 2-16Safety Locks . . . . . . . . . . . . . . . . . 2-16

DoorsLiftgate . . . . . . . . . . . . . . . . . . . . . . 2-17Power Assist Steps . . . . . . . . . . 2-21

Vehicle SecurityVehicle Security . . . . . . . . . . . . . . 2-22Vehicle Alarm System . . . . . . . 2-22Immobilizer . . . . . . . . . . . . . . . . . . 2-24Immobilizer Operation (KeyAccess) . . . . . . . . . . . . . . . . . . . . 2-24

Immobilizer Operation(Keyless Access) . . . . . . . . . . . 2-25

Exterior MirrorsConvex Mirrors . . . . . . . . . . . . . . 2-26Power Mirrors . . . . . . . . . . . . . . . . 2-26Heated Mirrors . . . . . . . . . . . . . . . 2-26Automatic Dimming Mirror . . . 2-27Blind Spot Mirrors . . . . . . . . . . . 2-27Reverse Tilt Mirrors . . . . . . . . . . 2-28

Interior MirrorsInterior Rearview Mirrors . . . . . 2-28Automatic Dimming RearviewMirror . . . . . . . . . . . . . . . . . . . . . . . 2-28

Child-View Mirror . . . . . . . . . . . . 2-28WindowsWindows . . . . . . . . . . . . . . . . . . . . . 2-29Power Windows . . . . . . . . . . . . . 2-29Sun Visors . . . . . . . . . . . . . . . . . . . 2-31

RoofSunroof . . . . . . . . . . . . . . . . . . . . . . 2-31

Keys and Locks

Keys

{ WarningLeaving children in a vehicle withan ignition key or RemoteKeyless Entry (RKE) transmitter isdangerous and children or otherscould be seriously injured orkilled. They could operate thepower window or other controls ormake the vehicle move. Thewindows will function with the keyin the ignition or with the RKEtransmitter in the vehicle, andchildren or others could be caughtin the path of a closing window.Do not leave children in a vehiclewith the ignition key or an RKEtransmitter.


2-2 Keys, Doors, and Windows

One of the following keys comeswith the vehicle.

Key Access

The key is used for the driver door,ignition, and glove box.

Keyless Access

If the vehicle has the KeylessAccess system, there is a key in thetransmitter.This key inside the transmitter isused for the driver door andglove box.



If the vehicle has the KeylessAccess system, the transmitter hasa button on the side of thetransmitter used to remove the key.Do not pull the key out withoutpressing the button.Programming Keys

Follow these procedures to programup to eight keys to the vehicle.

Programming with a RecognizedKey (Key Vehicles Only)

To program a new key:1. Insert the original, already

programmed key in the ignitionand turn the key to the ON/RUNposition.

2. Turn the key to LOCK/OFF, andremove the key.

3. Insert the new key to beprogrammed and turn it to theON/RUN position withinfive seconds.The security light will turn offonce the key has beenprogrammed.

4. Repeat Steps 13 if additionalkeys are to be programmed.

If a key is lost or damaged, see yourdealer to have a new key made.

Programming without aRecognized Key (KeyVehicles Only)

Program a new key to the vehiclewhen a recognized key is notavailable. Canadian regulationsrequire that Canadian owners seetheir dealer.If there are no currently recognizedkeys available, follow this procedureto program the first key.This procedure will takeapproximately 30 minutes tocomplete for the first key. Thevehicle must be off and all of thekeys must be with you.1. Insert the new vehicle key into

the ignition.2. Turn to ON/RUN. The security

light will come on.3. Wait 10 minutes until the

security light turns off.4. Turn the ignition to LOCK/OFF.



5. Repeat Steps 24 two moretimes. After the third time, turn toON/RUN; the key is learned andall previously known keys will nolonger work with the vehicle.

Remaining keys can be learned byfollowing the procedure inProgramming with a RecognizedKey (Key Vehicles Only).The key has a bar-coded key tagthat the dealer or qualified locksmithcan use to make new keys. Storethis information in a safe place, notin the vehicle.See your dealer if a replacementkey or additional key is needed.If it becomes difficult to turn a key,inspect the key blade for debris.Periodically clean with a brushor pick.With an active OnStar subscription,an OnStar Advisor may remotelyunlock the vehicle. See OnStarOverview on page 14-1.

Remote Keyless Entry(RKE) SystemSee Radio Frequency Statement onpage 13-12.

If there is a decrease in the RKEoperating range:. Check the distance. The

transmitter may be too far fromthe vehicle.

. Check the location. Othervehicles or objects may beblocking the signal.

. Check the transmitter's battery.See Battery Replacement laterin this section.

. If the transmitter is still notworking correctly, see yourdealer or a qualified technicianfor service.

Remote Keyless Entry(RKE) System Operation(Key Access)The RKE transmitter functions maywork up to 60 m (197 ft) away fromthe vehicle.Other conditions can affect theperformance of the transmitter. SeeRemote Keyless Entry (RKE)System on page 2-4.

With Remote Start (withoutRemote Start Similar)



/ (Remote Vehicle Start):If equipped, press and release Q,then immediately press and hold/for at least four seconds. Theengine may be started from outsidethe vehicle using the RKEtransmitter. See Remote VehicleStart on page 2-13.

Q (Lock): Press to lock all doors.If enabled through the DriverInformation Center (DIC), the turnsignal lamps flash once to indicatelocking has occurred. If enabledthrough the DIC, the horn chirpswhen Q is pressed again withinthree seconds. See VehiclePersonalization on page 5-49.

Pressing Q arms the contenttheft-deterrent system. See VehicleAlarm System on page 2-22.

If equipped with auto mirror folding,pressing and holding Q forone second will fold the mirrors. Theauto mirror folding feature will not

operate unless it is enabled. SeeVehicle Personalization onpage 5-49.

K (Unlock): Press once to unlockonly the driver door. If K is pressedagain within three seconds, allremaining doors unlock. The interiorlamps may come on and stay on for20 seconds or until the ignition isturned on.If enabled through the DIC, the turnsignal lamps flash twice to indicateunlocking has occurred. See VehiclePersonalization on page 5-49.If enabled through the DIC, theexterior lamps may turn on. SeeVehicle Personalization onpage 5-49.

Pressing K on the RKE transmitterdisarms the content theft-deterrentsystem. See Vehicle Alarm Systemon page 2-22.

If equipped with auto mirror folding,pressing and holding K forone second will unfold the mirrors.The auto mirror folding feature will

not operate unless it is enabled.See Vehicle Personalization onpage 5-49.

b (Liftgate): Press twice to openor close the liftgate. Press once tostop the liftgate from moving.c (Liftglass): Press twice to openthe liftglass.7 (Vehicle Locator/PanicAlarm): Press and release toinitiate vehicle locate. The turnsignal lamps flash and the hornsounds three times.

Press and hold 7 for more thanthree seconds to activate the panicalarm. The turn signal lamps flashand the horn sounds repeatedly for30 seconds. The alarm turns offwhen the ignition is moved to ON/RUN or 7 is pressed again. Theignition must be in LOCK/OFF forthe panic alarm to work.



Programming Transmitters tothe Vehicle

Only RKE transmitters programmedto this vehicle will work. If atransmitter is lost or stolen, areplacement can be purchased andprogrammed through your dealer.Each vehicle can have up toeight transmitters programmed to it.See your dealer for transmitterprogramming.Battery Replacement

Replace the battery in thetransmitter soon if the REPLACEBATTERY IN REMOTE KEYmessage displays in the DIC.

{ CautionWhen replacing the battery, donot touch any of the circuitry onthe transmitter. Static from yourbody could damage thetransmitter.

To replace the battery:

1. Separate and remove the backcover of the transmitter with aflat, thin object, such as a coin.

2. Press and slide the battery downtoward the pocket of thetransmitter in the direction of thekey ring. Do not use a metalobject

3. Remove the battery.4. Insert the new battery, positive

side facing up. Replace with aCR2032 or equivalent battery.

5. Push together the transmitterback cover top side first, andthen the bottom toward thekey ring.



Remote Keyless Entry(RKE) System Operation(Keyless Access)The Keyless Access system allowsfor vehicle entry when thetransmitter is within 1 m (3 ft). SeeKeyless Access Operation later inthis section.The RKE transmitter functions maywork up to 60 m (197 ft) away fromthe vehicle.Other conditions can affect theperformance of the transmitter. SeeRemote Keyless Entry (RKE)System on page 2-4.

With Remote Start (withoutRemote Start Similar)

/ (Remote Vehicle Start):If equipped, press and release Q,then immediately press and hold/for at least four seconds. Theengine may be started from outsidethe vehicle using the RKEtransmitter. See Remote VehicleStart on page 2-13.

Q (Lock): Press to lock all doors.If enabled through the DriverInformation Center (DIC), the turnsignal lamps flash once to indicate

locking has occurred. If enabledthrough the DIC, the horn chirpswhen Q is pressed again withinthree seconds. See VehiclePersonalization on page 5-49.

Pressing Q arms the contenttheft-deterrent system. See VehicleAlarm System on page 2-22.

If equipped with auto mirror folding,pressing and holding Q forone second will fold the mirrors. Theauto mirror folding feature will notoperate unless it is enabled. SeeVehicle Personalization onpage 5-49.

K (Unlock): Press once to unlockonly the driver door. If K is pressedagain within three seconds, allremaining doors unlock. The interiorlamps may come on and stay on for20 seconds or until the ignition isturned on.If enabled through the DIC, the turnsignal lamps flash twice to indicateunlocking has occurred. If enabled



through the DIC, the exterior lampsmay turn on. See VehiclePersonalization on page 5-49.

Pressing K on the RKE transmitterdisarms the content theft-deterrentsystem. See Vehicle Alarm Systemon page 2-22.

If equipped with auto mirror folding,pressing and holding K forone second will unfold mirrors. Theauto mirror folding feature will notoperate unless it is enabled. SeeVehicle Personalization onpage 5-49.

b (Liftgate): Press twice to openor close the liftgate. Press once tostop the liftgate from moving.c (Liftglass): Press twice to openthe liftglass.7 (Vehicle Locator/PanicAlarm): Press and release toinitiate vehicle locate. The turnsignal lamps flash and the hornsounds three times.

Press and hold 7 for more thanthree seconds to activate the panicalarm. The turn signal lamps flashand the horn sounds repeatedly for30 seconds. The alarm turns offwhen the ignition is moved to ON/RUN or 7 is pressed again. Theignition must be in LOCK/OFF forthe panic alarm to work.Keyless Access Operation

The Keyless Access system allowsfor doors and the liftgate to beaccessed without pressing the RKEtransmitter button. The RKEtransmitter must be within 1 m (3 ft)of the door being opened. If thevehicle has this feature, there will bea button on the outside doorhandles.Keyless Access can beprogrammed to unlock all doors onthe first lock/unlock press from thedriver door. See VehiclePersonalization on page 5-49.

Keyless Unlocking/Locking fromthe Driver Door

When the doors are locked and theRKE transmitter is within 1 m (3 ft)of the door handle, pressing thelock/unlock button on the driver doorhandle will unlock the driver door.If the lock/unlock button is pressedagain within five seconds, allpassenger doors will unlock.

Driver Side Shown, PassengerSimilar



Pressing the lock/unlock button willcause all doors to lock if any of thefollowing occur:. It has been more than

five seconds since the first lock/unlock button press.

. Two lock/unlock button presseswere used to unlock all doors.

. Any vehicle door has beenopened and all doors are nowclosed.

Keyless Unlocking/Locking fromthe Passenger Doors

When the doors are locked and theRKE transmitter is within 1 m (3ft) ofthe door handle, pressing the lock/unlock button on a passenger doorhandle will unlock all doors.Pressing the lock/unlock button willcause all doors to lock if any of thefollowing occur:. The lock/unlock button was used

to unlock all doors.

. Any vehicle door has beenopened and all doors are nowclosed.

Passive Locking

If other electronic devices interferewith the RKE transmitter signal, thevehicle may not detect the RKEtransmitter inside the vehicle.If passive locking is enabled, thedoors may lock with the RKEtransmitter inside the vehicle. Donot leave the RKE transmitter in anunattended vehicle.If equipped with Keyless Access,this feature will lock the vehicleseveral seconds after all doors areclosed, if the vehicle is off and atleast one RKE transmitter has beenremoved from the interior, or noneremain in the interior.Temporary Disable PassiveLocking Feature

Temporarily disable the passivelocking by pressing and holding Kon the interior door switch with adoor open for at least four seconds,

or until three chimes are heard.Passive locking will then remaindisabled until Q on the interior dooris pressed, or until the vehicle isturned on.To customize the doors toautomatically lock when exiting thevehicle, see Remote Lock, Unlock,Start under Vehicle Personalizationon page 5-49.

Keyless Liftgate Opening

Press the touch pad on theunderside of the liftgate handle toopen the liftgate when all doors areunlocked, or when all doors arelocked and the transmitter is within1 m (3 ft).Keyless Liftglass Opening

Press the exterior liftglass button toopen the liftglass when all doors areunlocked, or when all doors arelocked and the transmitter is within1 m (3 ft).See Liftgate on page 2-17.



Keyed Access

To access a vehicle with a deadtransmitter battery, see Door Lockson page 2-14.

Programming Transmitters tothe Vehicle

Only RKE transmitters programmedto the vehicle will work. If atransmitter is lost or stolen, areplacement can be purchased andprogrammed through your dealer.The vehicle can be reprogrammedso that lost or stolen transmitters nolonger work. Each vehicle can haveup to eight transmitters matchedto it.Programming with a RecognizedTransmitter (Keyless AccessVehicles Only)

A new transmitter can beprogrammed to the vehicle whenthere is one recognized transmitter.To program, the vehicle must be offand all transmitters, both currentlyrecognized and new, must bewith you.

1. Remove the key from therecognized transmitter.

2. Place the recognizedtransmitter(s) in the cupholder orpassenger seat.

3. Insert the vehicle key into thekey lock cylinder on the driverdoor handle. Then turn the keycounterclockwise, to the unlockposition, five times within10 seconds.The Driver Information Center(DIC) displays READY FORREMOTE#2, 3, 4, ETC.

4. Place the new transmitter in thetransmitter pocket/insert.Open the center console storagearea and the storage tray. Thetransmitter pocket/insert is infront of the storage area next tothe center console storage areabetween the driver and frontpassenger seats.

5. Press the ENGINE START/STOP button. When thetransmitter is learned, the DICdisplay will show that it is readyto program the next transmitter.

6. Remove the transmitter from thetransmitter pocket and press Kor Q on the transmitter.To program additionaltransmitters, repeat Steps 46.When all additional transmittersare programmed, press and holdthe ENGINE START/STOPbutton for approximately12 seconds to exitprogramming mode.



7. Return the key back into thetransmitter.

Programming without aRecognized Transmitter (KeylessAccess Vehicles Only)

If there are no currently recognizedtransmitters available, follow thisprocedure to program up to eighttransmitters. This feature is notavailable in Canada. This procedurewill take approximately 30 minutesto complete. The vehicle must be offand all transmitters to beprogrammed must be with you.1. Remove the vehicle key from the

transmitter.2. Insert the vehicle key into the

key lock cylinder on the driverdoor handle; then turn the keycounterclockwise, to the unlockposition five times within10 seconds.The Driver Information Center(DIC) displays REMOTE LEARNPENDING, PLEASE WAIT.

3. Wait for 10 minutes until the DICdisplays PRESS ENGINESTART BUTTON TO LEARN,then press the ENGINE START/STOP button.The DIC display will again showREMOTE LEARN PENDING,PLEASE WAIT.

4. Repeat Step 3 two additionaltimes. After the third time allpreviously known transmitterswill no longer work with thevehicle. Remaining transmitterscan be relearned during the nextsteps.The DIC display shouldnow show READY FORREMOTE # 1.

5. Place the new transmitter in thetransmitter pocket/insert.Open the center console storagearea and the storage tray. Thetransmitter pocket/insert is infront of the storage area next tothe center console storage areabetween the driver and frontpassenger seats.

6. Press the ENGINE START/STOP button. When thetransmitter is learned, the DICdisplay will show that it is readyto program the next transmitter.



7. Remove the transmitter from thetransmitter pocket/insert andpress K or Q on the transmitter.To program additionaltransmitters, repeat Steps 57.When all additional transmittersare programmed, press and holdthe ENGINE START/STOPbutton for approximately12 seconds to exitprogramming mode.

8. Return the key back into thetransmitter.

Starting the Vehicle with a LowTransmitter Battery

If the transmitter battery is weak or ifthere is interference with the signal,the DIC may displayREMOTE NOTDETECTED or NO REMOTE KEYWAS DETECTED. PLACE KEY INTRANSMITTER POCKET, THENSTART YOUR VEHICLE. whenstarting the vehicle. See Key andLock Messages on page 5-40.

To start the vehicle:1. Open the center console storage

area and the storage tray.

2. Place the transmitter in thetransmitter pocket/insert.

3. With the vehicle in P (Park) orN (Neutral) press the brakepedal and the ENGINE START/STOP button.Replace the transmitter batteryas soon as possible.

Battery Replacement

Replace the battery in thetransmitter soon if the REPLACEBATTERY IN REMOTE KEYmessage displays in the DIC.

{ CautionWhen replacing the battery, donot touch any of the circuitry onthe transmitter. Static from yourbody could damage thetransmitter.



To replace the battery:

1. With the key removed, insert aflat, thin object in center of thetransmitter to separate andremove the back cover.

2. Lift the battery with a flat object3. Remove the battery.4. Insert the new battery, positive

side toward the back cover.Replace with a CR2032 orequivalent battery.

5. Push together the transmitter.

Remote Vehicle StartIf equipped with the remote startfeature, the climate control systemwill come on when the vehicle isstarted remotely depending on theoutside temperature.

The rear defog and heated andcooled seats, if equipped, may alsocome on. See Heated and CooledFront Seats on page 3-7 andVehicle Personalization onpage 5-49.

Laws in some communities mayrestrict the use of remote starters.Check local regulations for anyrequirements on remote starting ofvehicles.Do not use remote start if thevehicle is low on fuel.The vehicle cannot be remotestarted if:. The key is in the ignition (Key

Access) or the transmitter is inthe vehicle (Keyless Access).

. The hood is not closed.

. There is an emission controlsystem malfunction and themalfunction indicator lamp is on.



The engine will turn off during aremote vehicle start if:. The coolant temperature gets

too high.. The oil pressure gets low.The RKE transmitter range may bereduced while the vehicle is running.Other conditions can affect theperformance of the transmitter. SeeRemote Keyless Entry (RKE)System on page 2-4 or VehiclePersonalization on page 5-49.

Starting the Engine Using RemoteStart

1. Press and release Q.

2. Immediately press and hold /for at least four seconds or untilthe turn signal lamps flash.When the vehicle starts, theparking lamps will turn on. Thedoors will be locked and theclimate control system maycome on.

The engine will continue to runfor 10 minutes. Repeat thesteps 1 and 2 for a 10-minutetime extension.

Place the ignition in ON/RUN/START to operate the vehicle.Extending Engine Run Time

The engine run time can beextended by 10 minutes, for a totalof 20 minutes, if during the first10 minutes Steps 12 are repeatedwhile the engine is still running.A maximum of two remote starts,or a single start with an extension,is allowed between ignition cycles.The vehicle's ignition must beturned on and then back off to useremote start again.Canceling a Remote Start

To cancel a remote start, do one ofthe following:. Press and hold/ until the

parking lamps turn off.

. Turn on the hazard warningflashers.

. Turn the ignition on and then off.

Door Locks

{ WarningUnlocked doors can bedangerous.

. Passengers, especiallychildren, can easily open thedoors and fall out of a movingvehicle. When a door islocked, the handle will notopen it. The chance of beingthrown out of the vehicle in acrash is increased if thedoors are not locked. So, allpassengers should wearsafety belts properly and thedoors should be lockedwhenever the vehicle isdriven.

(Continued)



Warning (Continued)

. Young children who get intounlocked vehicles may beunable to get out. A child canbe overcome by extreme heatand can suffer permanentinjuries or even death fromheat stroke. Always lock thevehicle whenever leaving it.

. Outsiders can easily enterthrough an unlocked doorwhen you slow down or stopthe vehicle. Locking the doorscan help prevent this fromhappening.

To lock or unlock the doors fromoutside the vehicle:. Press Q or K on the Remote

Keyless Entry (RKE) transmitter.. Use the key in the driver door.. If equipped, use the Keyless

Access system.

To lock or unlock the doors frominside the vehicle:. Press Q or K on the power door

lock switch.. Pushing down the manual lock

knob on the driver door will lockall doors. Pushing down themanual lock knob on apassenger door will lock onlythat door.

. Pulling an interior door handlewill unlock the door. Pulling thedoor handle again unlatches it.

See Remote Keyless Entry (RKE)System Operation (Keyless Access)on page 2-7 or Remote KeylessEntry (RKE) System Operation (KeyAccess) on page 2-4.

Power Door Locks

Press Q or K on the RemoteKeyless Entry (RKE) transmitter.See Remote Keyless Entry (RKE)System Operation (Keyless Access)on page 2-7 or Remote KeylessEntry (RKE) System Operation (KeyAccess) on page 2-4.

Q (Lock): Press to lock the doors.K (Unlock): Press to unlock thedoors.



Delayed LockingWhen locking the doors with thepower lock switch and a door or theliftgate is open, the doors will lockfive seconds after the last door isclosed. You will hear three chimesto signal that the delayed lockingfeature is in use.Pressing the power lock switchtwice will override the delayedlocking feature and immediately lockall the doors.This feature will not operate if thekey is in the ignition.This feature can be programmedusing the Driver InformationCenter (DIC). See Delayed DoorLock under Vehicle Personalizationon page 5-49.

Automatic Door LocksThe vehicle may have an automaticlock/unlock feature. This feature canbe programmed using the DriverInformation Center (DIC). SeeVehicle Personalization onpage 5-49.

Lockout ProtectionIf the driver side power door lockswitch is pressed when the driverdoor is open and the key is in theignition, all of the doors will lock andthen the driver door will unlock.This feature may be turned off andon through vehicle personalization.See Vehicle Personalization onpage 5-49.

Safety LocksThe rear door safety locks preventpassengers from opening the reardoors from inside the vehicle.

Press { to activate the safety lockson the rear doors. The indicator lightcomes on when activated.

Press { again to deactivate thesafety locks.



Doors

Liftgate

{ WarningExhaust gases can enter thevehicle if it is driven with theliftgate or trunk/hatch open,or with any objects that passthrough the seal between thebody and the trunk/hatch orliftgate. Engine exhaust containscarbon monoxide (CO) whichcannot be seen or smelled. It cancause unconsciousness and evendeath.If the vehicle must be driven withthe liftgate or trunk/hatch open:

. Close all of the windows.

. Fully open the air outlets onor under the instrumentpanel.

(Continued)

Warning (Continued)

. Adjust the climate controlsystem to a setting thatbrings in only outside air andset the fan speed to thehighest setting. See ClimateControl Systems in theIndex.

. If the vehicle is equipped witha power liftgate, disable thepower liftgate function.

See Engine Exhaust onpage 9-27.

{ CautionTo avoid damage to the liftgate orliftgate glass, make sure the areaabove and behind the liftgate isclear before opening it.

Manual Liftgate

To open the liftgate, press K on thepower door lock switch or press Kon the RKE transmitter twice tounlock all doors. Press the touchpad (1) on the underside of theliftgate handle and lift up.Press the button (2) abovethe license plate to open the liftgateglass, or pressc on the RKEtransmitter. Do not leave the liftgateglass open when raising the liftgate.



There will be a delay in the releaseof the liftgate glass if there is anattempt to open it while the rearwipers are in motion.Use the pull cup to lower and closethe liftgate. Do not press the touchpad while closing the liftgate. Thiswill cause the liftgate to beunlatched.If equipped with Keyless Access,the RKE transmitter must be within1 m (3 ft) of the liftgate toautomatically unlock it. See RemoteKeyless Entry (RKE) SystemOperation (Keyless Access) onpage 2-7 or Remote Keyless Entry(RKE) System Operation (KeyAccess) on page 2-4.

The liftgate has an electric latch.If the battery is disconnected or haslow voltage, the liftgate will notopen. The liftgate will resumeoperation when the battery isreconnected and charged.

Power Liftgate Operation

{ WarningYou, or others, could be injured ifcaught in the path of the powerliftgate. Make sure there is no onein the way of the liftgate as it isopening and closing.

If equipped with a power liftgate, theswitch is on the overhead console.The vehicle must be in P (Park).

There are three modes:. MAX: The liftgate power opens

to the maximum height.. 3/4: The liftgate power opens to

a reduced height that can be setfrom 3/4 to fully open. Use thissetting to prevent the liftgatefrom opening into overheadobstructions such as a garagedoor or roof-mounted cargoduring power operation. Theliftgate can still be manuallyopened all the way.

. OFF: The liftgate only operatesmanually in this position.

To power open or close the liftgate,select MAX or 3/4 mode.. Pressb twice quickly on the

RKE transmitter until the liftgatemoves.

. Press8 on the overheadconsole. The driver door mustalso be unlocked.



. Press the touch pad on theoutside liftgate handle afterunlocking all doors. If equippedwith Keyless Access a lockedvehicle can be opened if theRKE transmitter is within 1m(3 ft.) of the touch pad.

. Pressl on the bottom edge ofthe liftgate next to the latch toclose.

Press any liftgate button or thetouch pad orb on the RKEtransmitter while the liftgate ismoving to stop it. Pressing again

restarts the operation in the reversedirection. The touch pad on theliftgate handle cannot be used toclose the liftgate.Do not manually force the liftgate toopen or close during a power cycle.The power liftgate may betemporarily disabled in extremelylow temperatures, or after repeatedpower cycling over a short period oftime. If this occurs, the liftgate canstill be operated manually. SelectOFF on the liftgate switch.If the vehicle is shifted out ofP (Park) while the power function isin progress, the liftgate will continueto completion. If the vehicle isaccelerated before the liftgate hascompleted moving, the liftgate maystop or reverse direction. Make surethe liftgate is closed and latchedbefore driving.If the power liftgate support struthas lost pressure, the turn signalswill flash and a chime will sound

while the liftgate automaticallycloses. See your dealer for servicebefore using the power liftgate.Obstacle Detection Features

If the liftgate encounters an obstacleduring a power open or close cycle,a warning chime will sound and theliftgate will automatically reversedirection and move a short distanceaway from the obstacle. Afterremoving the obstruction, the powerliftgate operation can be used again.If the liftgate encounters multipleobstacles on the same power cycle,the power function will deactivate.After removing the obstructions,manually close the liftgate, whichwill allow normal power operationfunctions to resume.If the vehicle is locked while theliftgate is closing, and an obstacle isencountered that prevents theliftgate from completely closing, thehorn will sound as an alert that theliftgate did not close.



Pinch sensors are on the sideedges of the liftgate. If an object iscaught between the liftgate and thevehicle and presses against asensor, the liftgate will reversedirection and open fully. The liftgatewill remain open until it is activatedagain or closed manually.Setting the 3/4 Mode

To change the position the liftgatestops at when opening:1. Select MAX or 3/4 mode and

power open the liftgate.2. Stop the liftgate movement at

the desired height by pressingany liftgate switch. Manuallyadjust the liftgate position ifneeded.

3. Press and hold8 next to thelatch on the outside of theliftgate until the turn signals flashand a beep sounds. Thisindicates the setting has beenrecorded.

The liftgate cannot be set below aminimum programmable height.If there is no light flash or sound,then the height adjustment may betoo low.

Manual Operation

Select OFF to manually operate theliftgate. See Manual Liftgate at thebeginning of this section.Hands-Free Operation

If equipped with Hands-Free VehicleAccess, the liftgate may be openedvia a kicking motion beneath therear bumper.If the RKE transmitter is not within1m (3 ft) of the liftgate duringhands-free operation, the liftgate willnot open.



To operate the hands-free system:1. Under the center of the rear

bumper, kick your foot up in oneswift motion and then pullit back.

2. Do not touch the liftgate until ithas fully opened.

Keep the RKE transmitter awayfrom the rear of the vehicle or turnthe liftgate mode to OFF whencleaning or working near the rearbumper to avoid accidental openingof the liftgate.

Power Assist Steps

If equipped, the power assist stepswill deploy when the door is openedand automatically retractthree seconds after the door isclosed. The power assist steps willretract immediately if the vehiclestarts moving.Keep hands, children, pets, objects,and clothing clear of the powerassist steps when in motion. Thesteps will reverse direction if theyencounter an obstruction whenopening or closing. Remove the

obstruction, then open and close thedoor on the same side to completethe motion of the assist steps. If theobstruction is not cleared, the assiststeps remain extended while driving.There are two other modes ofoperation:Deploy Mode: To extend bothpower assist steps for cleaning,pressj while the vehicle is inP (Park) or (N) . Pressj again toretract them. The DIC will display amessage.Lock Mode: Press and holdj forfour seconds to lock and disablethe power assist steps. Press andholdj for four seconds again toenable them. The DIC will display amessage.



Vehicle SecurityThis vehicle has theft-deterrentfeatures; however, they do not makethe vehicle impossible to steal.

Vehicle Alarm System

The indicator light, on theinstrument panel near thewindshield, indicates the status ofthe system.Off: Alarm system is disarmed.On Solid: Vehicle is securedduring the delay to arm the system.Fast Flash: Vehicle is unsecured.A door, liftgate or the hood is open.

Slow Flash: Alarm system isarmed.Arming the Alarm System

1. Turn off the vehicle.2. Lock the vehicle with one of

three ways:. Use the RKE transmitter.. Use the Keyless Access

system.. With a door open, press Q

on the interior of the door.3. After 30 seconds the alarm

system will arm, and theindicator light will begin to slowlyflash. Pressing Q on the RKEtransmitter a second time willbypass the 30-second delay andimmediately arm the alarmsystem.

The vehicle alarm system will notarm if the doors are locked withthe key.

If the driver door is opened withoutfirst unlocking with the RKEtransmitter, the horn will chirp andthe lights will flash to indicatepre-alarm. If the vehicle is notstarted, or the door is not unlockedby pressing K on the RKEtransmitter during the 10-secondpre-alarm, the alarm will beactivated.The alarm will also be activated if apassenger door, the liftgate, or thehood is opened without firstdisarming the system. When thealarm is activated, the turn signalsflash and the horn sounds for about30 seconds. The alarm system willthen re-arm to monitor for the nextunauthorized event.Disarming the Alarm System

To disarm the alarm system or turnoff the alarm if it has been activated:. Press K on the RKE transmitter.. Unlock the vehicle using the

Keyless Access system.



. Start the vehicle.To avoid setting off the alarm byaccident:. Lock the vehicle after all

occupants have exited.. Always unlock a door with the

RKE transmitter, or use theKeyless Access system.Unlocking the driver door withthe key will not disarm thesystem or turn off the alarm.

How to Detect a TamperCondition

If K is pressed on the RKEtransmitter and the horn chirps threetimes, an alarm occurred previouslywhile the alarm system was armed.If the alarm has been activated, amessage will appear on the DIC.See Security Messages onpage 5-44.

Intrusion Sensor andInclination Sensor

In addition to the standardtheft-deterrent system features, thissystem may also have an inclinationsensor and intrusion sensor.The inclination sensor can set offthe alarm if it senses movement ofthe vehicle, such as a change invehicle orientation.The intrusion sensor monitors thevehicle interior, and can activate thealarm if it senses unauthorized entryinto the vehicles interior. Do notallow passengers or pets to remainin the vehicle when the intrusionsensor is activated.Before arming the theft-deterrentsystem and activating the intrusionsensor:. Make sure all doors and

windows are completely closed.. Secure any loose items such as

a sunshades.

. Make sure there are noobstructions blocking thesensors in the front overheadconsole.

. Close DVD screens beforeleaving the vehicle.

Intrusion and InclinationSensors Disable Switch

It is recommended that the intrusionand inclination sensors bedeactivated if pets are left in thevehicle or the vehicle is beingtransported.



With the vehicle off, presso inthe front overhead console to turnoff the feature.The indicator light will come onmomentarily, indicating that thesesensors have been disabled untilthe next time the alarm system isarmed.

ImmobilizerSee Radio Frequency Statement onpage 13-12.

Immobilizer Operation(Key Access)

This vehicle has a passivetheft-deterrent system.The system does not have to bemanually armed or disarmed.

The vehicle is automaticallyimmobilized when the vehicle isturned off.The system is automaticallydisarmed when the key is turned toON/RUN, ACC/ACCESSORY,or START from the LOCK/OFFposition.The security light, in the instrumentcluster, comes on if there is aproblem with arming or disarmingthe theft-deterrent system.When trying to start the vehicle, thesecurity light comes on briefly whenthe ignition is turned on.If the engine does not start and thesecurity light stays on, there is aproblem with the system. Turn theignition off and try again.If the engine still does not start, andthe key appears to be undamaged,try another ignition key. It may benecessary to check the fuse. SeeFuses on page 10-33. If the enginestill does not start with the other key,

the vehicle needs service. If thevehicle does start, the first key maybe faulty. See your dealer.It is possible for the immobilizersystem to learn new or replacementkeys. Up to eight keys can beprogrammed for the vehicle. Toprogram additional keys, see Keyson page 2-1. To program additionaltransmitters, see Remote KeylessEntry (RKE) System Operation(Keyless Access) on page 2-7 orRemote Keyless Entry (RKE)System Operation (Key Access) onpage 2-4.

Do not leave the key or device thatdisarms or deactivates the vehicletheft system in the vehicle.See your dealer to get a new keyblank cut exactly as the ignition keythat operates the system.



Immobilizer Operation(Keyless Access)This vehicle has a passivetheft-deterrent system.The system does not have to bemanually armed or disarmed.The vehicle is automaticallyimmobilized when the transmitterleaves the vehicle.The immobilization system isdisarmed when the ignition button ispressed in and a valid transmitter isfound in the vehicle.

The security light in the instrumentcluster comes on if there is aproblem with arming or disarmingthe theft-deterrent system.

The system has one or moretransmitters matched to animmobilizer control unit in thevehicle. Only a correctly matchedtransmitter will start the vehicle.If the transmitter is ever damaged,you may not be able to start thevehicle.When trying to start the vehicle, thesecurity light comes on briefly whenthe ignition is turned on.If the engine does not start and thesecurity light stays on, there is aproblem with the system. Turn thevehicle off and try again.If the RKE transmitter appears to beundamaged, try another transmitteror place the transmitter in thetransmitter pocket/insert next to thecenter console storage areabetween the driver and frontpassenger seats. See Starting theVehicle with a Low Transmitterunder Remote Keyless Entry (RKE)System Operation (Keyless Access)

on page 2-7 or Remote KeylessEntry (RKE) System Operation (KeyAccess) on page 2-4.

If the engine does not start with theother transmitter or when thetransmitter is in the pocket in thecenter console, the vehicle needsservice. See your dealer who canservice the theft-deterrent systemand have a new transmitterprogrammed to the vehicle.Do not leave the transmitter ordevice that disarms or deactivatesthe theft-deterrent system in thevehicle.



Exterior Mirrors

Convex Mirrors

{ WarningA convex mirror can make things,like other vehicles, look fartheraway than they really are. If youcut too sharply into the right lane,you could hit a vehicle on theright. Check the inside mirror orglance over your shoulder beforechanging lanes.

The passenger side mirror is convexshaped. A convex mirror's surface iscurved so more can be seen fromthe driver seat.

Power Mirrors

To adjust the mirrors:1. Press (1) or (2) to select the

driver or passenger side mirror.2. Press the arrows on the control

pad to move each mirror in thedesired direction.

3. Press either (1) or (2) again todeselect the mirror.

To power fold the mirrors:1. Press{ to fold the mirrors

inward.

2. Press{ again to return themirrors to the driving position.

Turn Signal Indicator

The vehicle may also have a turnsignal indicator on the mirror. Anarrow on the mirror flashes in thedirection of the turn or lane change.

Heated MirrorsThe heated outside rearview mirrorsturn on when the rear windowdefogger is on.1 (Rear Window Defogger): Thisbutton is on the climate controlpanel. Press to heat the mirror.See Rear Window Defogger underDual Automatic Climate ControlSystem on page 8-1.



Automatic DimmingMirrorThe driver outside mirrorautomatically adjusts for the glare ofheadlamps from behind.

Blind Spot MirrorsIf equipped, there is a small convexmirror built into the upper and outercorner of the driver outside rearviewmirror. It can show objects that maybe in the vehicle's blind zone.

Driving with the Blind SpotMirror

Actual Mirror View

1. When the approaching vehicle isa long distance away, the imagein the main mirror is small andnear the inboard edge of themirror.

2. As the vehicle gets closer, theimage in the main mirror getslarger and moves outboard.

3. As the vehicle enters the blindzone, the image transitions fromthe main mirror to the blind spotmirror.

4. When the vehicle is in the

Documents

2015 Yukon Denali Owner Manual