2015

4

undertree

mission

To become the leader of innovative cooling solutions, combining energy savings and state of the art environmental comfort.

strategy

To increase the competitive gap by offering an integrated solution for radiant conditioning system based on a patented system consisting of radiant panels, air treatment units and innovative systems including advanced electronic regulation.

undertree

5

in line with the requirements of Horizon 2020

made in Italy

quality

research and development

6

undertree

the well-being that comes from above

high performance and energy savings thanks to• the integration of several elements and the electronic

control of parameters• the system offers high comfort performances while

keeping energy consumption level down, ensuring efficient heating and cooling because the source is from ceiling surface

uniform climate both in summer and winter• climatic comfort uniformity

(the same temperature at each point of the room)• right level of humidity

(electronic control able to guarantee the correct dew point)• ideal temperature in any season of the year

UT radiant system ensure levels of comfort never before achieved with known technologies thanks to the proprietary software and OECP (Optimized Energy & Comfort Performance)

these are essential factors as far as comfort is concerned

high flexibility provided by• the system modularity• its dry-assembly makes it quick and easy to install,

suitable for all types of building: from residential to hospitals, from housings to commercial

• multiplicity of energy sources (gas/electricity)

ceiling radiant system

7

8

undertree

systems type comparisonceiling radiant system

radiant vs. heater• energy saving

(radiant system work with low water temperature to obtain better comfort and consequently maximum efficiency in the management of the energy resources: gas boiler / heat pump electricity)

• simple installation (radiant system does not require heavy builder works)

• climate comfort uniformity (radiant systems guarantee the same temperature at each point of the room)

architectural versatility (with the radiant systems the floor space is clear of any kind of machine or obstruction)

air vs. radiant• energy saving

(maximum efficiency in the management of the energy resources: gas boiler / heat pump electricity)

• climate comfort uniformity (radiant systems guarantee the same temperature at each point of the room)

• no allergens and bacteria distributed in the air (radiant systems do not cause problems of allergens and bacteria in the air as their filters are placed far from the environment and require less maintenance when compared to the air systems)

• no physical discomfort (radiant systems do not suffer the physical discomfort typical of the traditional air systems that have strong cold or hot air flows)

• maintenance costs cancelled out (radiant systems does not require constant maintenance of the filters or air ducts)

• architectural versatility (with the radiant system the floor space is clear of any kind of machine or obstruction)

floor vs. ceiling• cooling without condensation problems, simple

installation, no dust• less surface covering (no furniture) costs of

maintenance cancelled out

9

24° 22°

16°23°

37°

30°

23°

20°19°

14°

17°22°

19°20°

24°18°

22° 24°

18° 26°

20° 25°radiant ceiling

fancoil

heater

summerwinter

10

undertree

Radiant prefabricated panel based on a circuit system with finishing plasterboard sheet and laser marking of the hydraulic circuits. The panel finish/coating can be chosen from different types of plasterboard sheets, to correspond better to the requirements of thermal performance and construction finishing.

It can be modulated: by cutting it along the centerlines of the main module, you create new sub-modules that increase the adaptability of the radiating surface.The ridges and the connecting fittings are integrated and do not require external appendages, whatever is needed is inside the panel.

The radiant panel in its modular version was conceived for ceilings requiring access for inspection, typical of the tertiary sector. The ideal solution for environments that require high acoustic and thermal comfort.

Where restructuring a radiant panel is ideal for creating radiant surfaces between wooden, metal or concrete exposed beams, with clearances up to 40cm.

radiatesprefabricated radiant panelceiling radiant system

11

radiates

radiant panel

12

undertree regulatesdigital controlceiling radiant system

it regulates the comfort optimizing energy consumption

It is the ambient probe that detects the environmental climatic state by means of three sensors of high precision. Thanks to the control central unit and the control of the UTA plant it regulates consumption as regards respect of both economic and energy savings.

world interfaceThrough Internet, it communicates with other systems (connex, dali, dmx), ensuring expandability and maximum domotics control.

led lightning

It manages the integrated LED lighting dimming them according to desired profiles.

13

control

lid

lid

regulates

14

undertree regulatesdigital controlceiling radiant system

it feels the environment like the skin

The room probe detects the actual temperature perceived through a series of sensors, replicating the functioning of the human skin.

it learns your preferences

It regulates the indoor comfort taking into account your needs and optimizing the energy savings with a unique thermal comfort.

it receives your commands from remotely

Being accessible from a computer, tablet and smartphone via web interface, it allows you to adjust indoor climate even from remote areas.

15

control

lid

lid

regulates

16

undertree purifiesair treatment unitsceiling radiant system

A range of machines for the treatment of the quality of the air, specially designed for the radiant conditioning, that satisfythat satisfies any demand of air flow rate. They can effectively dehumidify, renew and recover at neutral temperature, with high efficiency.

All models are supervised by our control systems and therefore assistance can be given from remotely.

17

purifies

hot-cold

deumidification

18

undertree

The thermal radiation (infrared) can not be sed but felt by the skin: it’s clean and uniform heat spread, invisible, silent, clean the house because it does not move the dust, clean the environment because it requires less energy than traditional systems.

The human does not feel different temperature levels ensuring a higher standard of living compared to the localized heat sources.

With UnderTree radiant system, the climate at home is always “the ideal climate”. In each room, always the right temperature in every season and uniform and balanced with the body.

In winter, the warmer surface of the UnderTree radiant panels release heat (~70% by radiation, ~30% by natural convection) to cold surfaces (walls, floor, objects, peoples) creating a uniformly warm ensuring the best comfort at each point of the ambient.

how it works in winterceiling radiant system

19

winter

20

undertree

In the summer season the cooler surface of the UnderTree radiant panels, absorbs heat (~70% by radiation, ~30% by natural convection) from hot surfaces (walls, floor, objects, peoples) creating a uniformly fresh and with the right humidity level.

The body does not feel different temperature levels ensuring a higher standard of living than the localized heat sources.

The UnderTree system makes the radiating effect is perceived in very short times (few minutes) from its activation.

The operating logic (OECP), resident in the control software, optimize all functions of the UnderTree radiant plant providing significant energy savings compared to traditional systems.

how it works in summerceiling radiant system

21

summer

22

undertree

2400 mm

120 mm

panel

The standard panel size 240x120 cm is modular: cutting along the center lines of the main module, you can create new sub-modules that increase the adaptability of the radiant surface.

Each idea will be the one you desired and intended to, with no compromises and in perfect climate comfort.

dimensionspanel models for any need

23

600 mm 600 mm

quad

Removable and sound-absorbing radiant panel 60x60 cm Designed for heating and cooling, it has a plaster base coated with a mat and satin finish.It is used in environments that require a high

acoustic comfort and that are aesthetically well-finished such as hospitals, offices, restaurants, etc.

24

undertree

60 mm

specialspanel models for any need

beams

Ideal for renovation, it is the ideal panel to create radiating surfaces including between wood, metal or concrete exposed beams, with clearances up to 60 cm.

Beams can be connected in series up to 20 panels for a total length of 48 m.

25

600 mm 600 mm

steel

Removable metallic radiant panel 60x60 cm designed for heating and cooling, it has metallic base coated with different kind of finish.It is used in environments that require a high

level of performance and architectural design such asdirectional offices, restaurants, etc.

26

undertree

The surface screen printing which shows the hydraulic circuit allows for easy insertion of light points up to a diameter of 5 centimeters during its construction.

Between the two ridges of the panel there is a longitudinal seat that can be put the electric cables.

integrated led lighting

27

28

undertree

commercial

CGN ServicesPordenone, Italia, 2014

Generali InsurancePreganziol, Treviso, Italia, 2012

Headquarters Müller Verona, Italia, 2013

Car Dealership AudiPordenone, Italia, 2014

Headquarters clothing AnimoVicenza, Italia, 2014

Headquarters The Fresh ConnectionLafayette, California, USA, 2014

residential

Housing Projects NoveTrediciMilano, Italia, 2015

Housing Projects Le Tre PoleRoma, Italia, 2014

Housing Projects Palazzo GoraniMilano, Italia, 2015

Housing Projects Bellotti DueMilano, Italia, 2015

Housing Projects Domus SolisLugano, Svizzera, 2015

House RowlandOjai, California, USA, 2012

projectsceiling radiant system

29

housing

Hotel-Apartment complex MervilleGonçalo Byrne e João Ferreira Nunes, Jesolo, Venice, Italia, 2013

LaGare Hotel VeneziaMurano, Venezia, Italia, 2013

Gellius RestaurantOderzo, Treviso, Italia, 2012

Casino de la ValléeSaint-Vincent, Aosta, Italia, 2012

hospitals

New Hospital Centre SchiavoniaMonselice, Padova, Italia, 2014

New Surgical Centre in ConeglianoConegliano, Treviso, Italia, 2011

schools

School Centre Bellavitis Bassano del Grappa, Treviso, Italia, 2013

museums

Armani Silos MuseumMilano, Italia, 2015

30

undertree

colofon

graphic design by zanonarchitettiassociatizanonassociati.com

november 2015

all rights reserved

ItalyUnderTree s.r.l.via Amman, 34 33084 Cordenons PN

undertree.com

UnderTree s.r.l. | Cordenons PN Italy | | undertree.com

2015

des

igne

d b

y za

nona

rchi

tett

iass

oci

ati