2015 DITEQ Tile and Stone files/2015 DITEQ Tile and Stone.pdf · ARIX Technology ARIX Technology places diamond particles in three ... tile and stone cutting ... The M32 diamond bond

Discover the DITEQ Difference!

TILE ANDSTONE

PRODUCTS

DIAMOND TOOLS & EQUIPMENT

Toll-Free: 866-688-1032 • Fax: 877-220-4777 • Website: www.DITEQ.com2

Table of ContentsBridge Saw Blades .....................................3Specialty Blades .........................................4Turbo Diamond Blades ...............................5Continuous Rim Diamond Blades...............6Diamond Core Bits .....................................7Crown and Non-Coring Diamond Bits ........8Finger/Router Bits.......................................9Profi le Wheels ..........................................10Grinding Wheels ..................................11-13Adapters and Bushings ............................13Dust Containment ................................14-15Polishing Pads .....................................16-17Backer Pads .............................................16Slurry Treatment .......................................18Diamond Wire ...........................................18DX Diamond Blades .................................18Thin Veneer Diamond Blades ...................19

THREE GENERATIONS BEYOND

ARIX Technology

ARIX Technology places diamond particles in three dimensional patterns to deliver optimum performance.

Advanced multi-layered diamond segments with precise distribution of diamond particles throughout the segment

ARIX™

Prices are in U.S. dollars. Prices and specifi cations subject to change. Please refer to website or customer service for additional new product as well as overstock specials.

Discover the DITEQ Difference!Your complete source of high quality diamond blades and core bits, core drilling equipment and accessories, concrete and masonry saws, high speed gas cut off saws, concrete grinding and polishing machines, tile and stone cutting tools, hand polishing and grinding tools and related products and services that make DITEQ your one-stop for all of your cutting needs.

DITEQ—where our customers are the No. 1 priority, where quality and service are next to none, where technology and innovation come in every product we sell. We don’t want to be just another diamond tool source, we want to be your BEST diamond tool source.

Toll-Free: 866-688-1032 • Fax: 877-220-4777 • Website: www.DITEQ.com 3

S32X Silent Core 15 mm SegmentHeight Stone & Granite BladeFor Saws less than 10 hp

Super Premium DDiameter & Width Part No. List14 x .125 x 60-50mm D61045 $39816 x .125 x 60-50mm D61046 449

DITEQ silent core blades feature copper sandwiched between two steel cores. The copper absorbs vibration to reduce noise. Use the S32X for high performance cutting of a variety of stone including granite and engineered stone. Specifi cally designed for low horsepower saws.

S32X Silent Core(Low HP)

Professional bridge saw diamond blades with silent cores for both low and high horse powered saws. The ARIX blade is the leader when it comes to production and quality.

S52X ARIX™ Silent Core S52X Stone & Granite BladePRO V

20mm 25mm DDiameter & Width Part No. List Part No. List12 x .125 x 60-50mm D61013 $579 N/A14 x .125 x 60-50mm D61111 489 D61121 $63016 x .125 x 60-50mm D61112 590 D61122 72118 x .135 x 60-50mm D61113 705 D61123 90320 x .135 x 60-50mm D61114 966 D61124 1,017

M32 Marble Bridge Saw Blades Super Premium D

Diameter & Width Part No. List12 x .125 x 60mm-50mm D61001 $36314 x .125 x 60mm-50mm D61002 39816 x .125 x 60mm-50mm D61003 48718 x .135 x 60mm-50mm D61004 554

The M32 silent core marble blade has a diamond bond specifi cally designed for cutting marble on a bridge saw. The M32 diamond bond will give a superior chip-free cut with high speed and long life.

M32 Marble Blades

T42 Curly Que BladePRO IV D

Diameter & Width Part No. List12 x .085 x 60-50mm D56011 $27114 x .095 x 60-50mm D56010 30116 x .110 x 60-50mm D56012 391

The Curly Que blade is a closed-segment blade that features curly que stress relief slots that permits fast cutting of hard porcelain, marble and granite. With a 60/50mm arbor it is designed to be run on bridge saws. It does not have a silent core

T42 Curly Que Blade

Professional bridge saw diamond blades with silent cores for both low and high horse powered saws. The ARIX blade is the leader when it comes to production and quality.

The ARIX technology is our most advanced ARIX segment with multi-layered diamond segments with precise distribution of diamond particles throughout the segment.

S62X ARIX™ Silent Core S62X Stone & Granite BladePRO VI

20mm 25mm DDiameter & Width Part No. List Part No. List14 x .125 x 60-50mm D61130 $540 D 61140 $695 16 x .125 x 60-50mm D61131 650 D61141 79518 x .135 x 60-50mm D61132 780 D61142 99520 x .160 x 60-50mm D61133 1,070 D61143 1,150

Bridge Saw Diamond Blades


TP23 SegmentedPremium D

Diameter & Width Part No. List4 x .250 x 7/8 -5/8 D45001 $384.5 x .250 x 7/8 -5/8 D45004 435 x .250 x 7/8 -5/8 D45007 557 x .250 x DM-7/8 -5/8 D45010 984.5 x .375 x 7/8 -5/8 D45020 65 5 x .375 x 7/8 -5/8 D45021 76 7 x .375 x DM-7/8 -5/8 D45022 103

Use for cutting rodding channels 1/4 and 3/8 in hard materials. These channels are then used to insert reinforcing rods to the back side of stone countertops to increase its strength and reduce the chance of breakage.

M31V-S Vacuum Bond Blade

M31V-S Vacuum Bond BladeSuper Premium D

Diameter & Width Part No. List4 x .095 x 7/8 -5/8 D66011 $474.5 x .095 x 7/8 -5/8 D66012 665 x .095 x 7/8 -5/8 D66013 697 x .095 x 7/8 -5/8 D66015 90

Use for fast, clean cuts of marble, fi berglass, plastics and graphite. Vacuum bonded segments provide long life and smooth cutting.

TP23 Rodding Bar Blade

S21 T-Segmented Blade Special T-segment design makes the S21 two diamond tools in one. Use it to perform straight and curved cutting or light grinding applications on granite sink holes and other hard materials. The T-segments protrude from both sides of the blade to prevent binding, accurately and safely protecting both sides of the steel core.

S21 T-Segmented BladePremium D

Diameter & Width Part No. List4.5 x .110 x 7/8 -5/8 D62006 $1085 x .110 x 7/8 -5/8 D62007 122

S21 Dish Turbo Convex BladePremium D

Diameter & Width Part No. List5 x .110 x 7/8 -5/8 D66031 $132

S21 Dish TurboConvex Blade

Use this laser welded convex blade (.110 thin) for cutting sink holes and other curved cut appli-cations in granite and other hard stones.

Convex

Milling Wheel Super Premium D

Diameter & Width Part No. List14 x 40L x 8T x 8W D66332 $1,963

Milling Wheel Milling wheels are designed with large grinding segments to remove a wide amount of material in each pass. They can be used to mill or plane saws that have beds made of concrete

Blade Adapters PDescription Part No. ListFlush Mount Adapter* 130122 $26.00*Stainless

Specialty Diamond Blades

.393


S32 Raised Hub Turbo S32 Raised Hub Turbo Blade Super Premium D

Diameter & Width Part No. List 4 x .060 x 7/8 -5/8 D50032 $424.5 x .060 x 7/8 -5/8 D50033 605 x .060 x 7/8 -5/8 D50034 78

The raised hub turbo blade’s core is thicker at the center for added strength, but has a thinner diamond rim for fast, free cutting. Excellent for cutting granite, marble, porcelain and other hard material.

S31 Turbo Blade This narrow turbo was developed to cut the hardest granite chip-free and faster than any turbo rim blade on angle grinders. These blades will meet all of the requirements for stone, tile and any hard building materials cutting applications.

S42 Narrow Rim Turbo Blade PRO IV D

Diameter & Width Part No. List4 x .080 x 7/8 - 5/8 fl ush D53027 $474.5 x .080 x 7/8 - 5/8 fl ush D53028 555 x .080 x 7/8 - 5/8 fl ush D53029 666" x .080" x 7/8 - 5/8" D53030 837" x .080" x DM-7/8 - 5/8" D53031 107

S42 Narrow Turbo Blade

DITEQ's top of the line narrow rim turbo blade will cut the hardest material with clean smooth cuts along with superior speed that the profes-sional demands. If speed and life are important, then this is your blade.

S31 Turbo BladeSuper Premium D

Diameter & Width Part No. List4" x .085" x 7/8"- 5/8" fl ush D53021 $344.5" x .085" x 7/8"- 5/8" fl ush D53022 365" x .085" x 7/8"- 5/8" fl ush D53020 456" x .085" x 7/8" - 5/8" D53023 607" x .085" x DM-7/8" - 5/8" D53024 78

Turbo Diamond Blades

Stonefi re Super Premium D

Diameter & Width Part No. List4.5 x .095 x 7/8 - 5/8 fl ush D58022 $655 x .095 x 7/8 - 5/8 fl ush D58023 706" x .095" x 7/8 - 5/8" fl ush D58024 817" x .095" x DM-7/8 - 5/8" fl ush D58025 92

Stonefi re Turbo Blade The Stonefi re is a high quality diamond blade used to cut a wide range of hard materials ranging from granite to concrete and masonry. The bond is designed to cut extremely hard granite chip-free while still giving superior life in softer materials. The turbo side segments allow for better core protection and durability.

4"-10" .393" seg height12"-14" .472" seg height

B22 Firehawk IIIMulti-Purpose Turbo Blade

Premium Fast Cut Brick/Block DDiameter & Width Part No. List4" x .095" x 7/8 - 5/8" D58013 $384.5" x .095" x 7/8 - 5/8" fl ush D58012 435" x .095" x 7/8 - 5/8" fl ush D58011 486 x .095 x 7/8 - 5/8 fl ush D58018 707" x .095" x 7/8 - 5/8" DM D58014 9210 x .110 x 7/8 - 5/8 DM D58015 17812 x .110 x 1 - 20mm DP D58016 23314 x .125 x 1 - 20mm DP D58017 286

B22 Firehawk III Turbo Rim Blade

The Firehawk III features diamond pads that not only protect the steel core during curved cutting, but also give an excellent deep cutting of very hard materials such as hard granite and cured concrete. It also guarantees minimum chipping and clean cutting surface for dry cutting. It is normally used with an angle grinder or circular saw.


.200

DX-C Diamond Blades DX-C Continuous Rim BladeEconomy, Fast Cut D

Diameter & Width Part No. List4" x .060" x 5/8" D96201 $19.574.5" x .060" x 7/8"-5/8" D96202 245" x .060" x 7/8"-5/8" D96219 347" x .060" x 5/8" D96203 4710" x .060" x 5/8" D96204 83

One of the best initial values on the market for smooth, clean cutting of tile, porcelain, stone and masonry materials.

T23 Laser Cut Spider Continuous Rim

This thin-rim laser cut continuous rim diamond blade delivers fast, chip-free cutting of porcelain and vitreous, hard tile. It combines the smooth cutting advantages of a continuous rim blade with the stress relief of a slotted core design

T23 Laser Cut Spider Continuous RimPremium

Wet/Dry DDiameter & Width Part No. List4 x .060 x 5/8 D50053 $274.5 x .060 x 5/8 D50054 43

Wet OnlyDiameter & Width Part No. List7 x .060 x 5/8 D50040 $608 x .060 x 5/8 D50041 7010 x .060 x 5/8 D50042 103

T24 Continuous Rim This blade is a higher quality with an extra tall 9.5mm segment height designed for cutting ceramic tile, porcelain where chip-free cuts are required. Very fast cutting with a taller segment for extended life.

TG32 Glass Tile Blade The T32 is a metal bonded blade specifi cally designed for cutting glass tile.

T24 Continuous RimPremium D

Diameter & Width Part No. List8 x .060 x 5/8 D51009 $6510 x .080 x 5/8 D51010 9812 x .095 x 1 D51011 146

TG-32 Glass Tile BladeSuper Premium D

Diameter & Width Part No. List7 x .060 x 5/8 D50056 $5810 x .060 x 5/8 D50043 101

Continuous Rim Tile Diamond BladesT42 Curly Que Blade

PRO IV DDiameter & Width Part No. List10 x .085 x 5/8 D56006 $13514 x .095 x 1 D56002 319Other sizes available. Please call for pricing and availability.

The Curly Que blade is a closed-segment blade that features curly que stress relief slots that permits fast cutting of hard porcelain, marble and granite. It is a popular choice for professionals in the stone industry.

T42 Curly Que Blade

.375

.200

.275


The ultimate in performance! The S43AX core bits are the fastest and longest lasting core bits on the market. With ARIX™ technology of precise diamond placement throughout the segment, fabricators receive the fast drilling speeds possible without compromising tool life.

The S43AX is laser welded so they can be run wet or dry. Small diamond particles adhered to the barrel provides side protection to reduce binding for faster, cleaner cored holes.

If you want the ultimate in production try the DITEQ ARIX™ core bit!

S43AX Core BitPRO IV D

Diameter Part No. List1-1/4" x 5/8-11th D66215 $1081-3/8 x 5/8-11th D66216 1131-1/2" x 5/8-11th D66217 1191-3/4 x 5/8-11th D66218 1262 x 5/8-11th D66219 1423" drilling depth

S43AX Laser Welded Core Bit

Laser Welded Diamond Core Bits for Stone

S33 Blue Laser Welded Segmented Type Core Bits with 5/8 -11 Thread

S33 Laser Welded Segmented TypeCore Bits with 5/8 -11 Thread

Super PremiumCrown D Segmented D

Diameter Part No. List Part No. List1/2 D66134 $685/8 D66135 713/4 D66136 737/8 D66137 771 D66032 801-1/8 D66119 $851-1/4 D66033 911-3/8 D66034 961-1/2 D66035 1031-3/4 D66036 1082 D66037 1192-1/2 D66118 1313 D66038 1424 D66138 1593" drilling depth

These high performance bits are laser welded for the ultimate in strength and durability. Special diamond segment formulations make the S33 ideal for fabrication shops that want to maximize productivity. Use to cut a wide variety of granite, marble & stones. It can also used in the construc-tion trades wherever holes may be needed for water, gas and electrical piping, especially when natural stone is already installed.

S33 Silver Laser WeldedSegmented Type Core Bits with Side Protectors with 5/8 -11 Threads

These high performance bits are laser welded for the ultimate in strength and durability. Special diamond segment formulations make the S33 ideal for fabrication shops that want to maximize productivity. Use to cut a wide variety of stone, wet or dry.

S33 Laser Welded Segmentedwith Side Protectors - 5/8 -11 Threads

Super Premium DDiameter Part No. List1-1/8 D66203 $961-1/4 D66204 1031-3/8 D66205 1081-1/2 D66206 1131-3/4 D66208 1192 D66210 1262-1/2 D66211 1423 D66212 1594 D66213 1763" drilling depth

3" drilling depth

3" drilling depth

3" drilling depth


S23 Thin Wall Crown Core Bitswith 5/8 -11 Thread

Premium DDiameter Part No. List3/8" D31001 $901/2" D31002 935/8" D31003 943/4" D31004 987/8" D31005 1011" D31006 1101-1/8" D31007 1131-1/4 D31008 1341-3/8 D31009 1391-1/2 D31010 1431-5/8 D31011 1451-3/4 D31012 1481-7/8 D31013 1562 D31014 173

Designed to drill clean, smooth holes such as faucet-mounting holes in counter tops and for use in the construction trades wherever holes may be needed for water, gas and electrical piping - especially when natural stone is already installed. For cutting porcelain, granite and hard materials.

S23 Thin Wall Crown Core Bits with 5/8 -11 Threads

S23 CNC Thin Wall Crown Core BitBits with 1/2" Gas Thread

Designed to work on CNC machines, this bit is the same S23 bit but with 1/2" gas threads. It is designed to drill clean, smooth holes such as faucet-mounting holes in counter tops. For cutting porcelain, granite and hard materials.

S23 Thin Wall Crown Core Bitswith 1/2" Gas Thread

Premium DDiameter Part No. List1" D31025 1101-1/8" D31026 1131-1/4 D31027 1341-3/8 D31028 1391-1/2 D31024 1432 D31014 173

S23V-C Vacuum Bond Core BitPremium D

Diameter Part No. List1/4" D66286 $643/8" D66287 661/2" D66228 695/8" D66229 807/8" D66230 801" D66231 801-1/8" D66232 901-1/4" D66233 901-1/2" D66234 951-3/8" D66235 982" D66236 122

2-3/4" drilling depth

Designed for very fast and clean drilling of all types of tile and stone. May be used wet or dry.

S23V-C Vacuum Bond Core Bit

Non-Coring Bit SpecsDrilling Length 2Thread Size 5/8 -11

N25 NCB Non-Coring Bits

N25 NCB Non-Coring BitsPremium D

Diameter Part No. List1/4" D30001 $815/16" D30004 873/8 D30002 921/2 D30003 125

These core bits are designed to drill holes through all kinds of granite, stone and tile. Primarly used for drilling anchor holes. The N25 must be used wet. and highly recommended for wet drilling. For installing anchors.

Diamond Core Bits for Stone and Tile


For high-performance shaping in fabrication applications. Professionals have found ARIX fi nger bits to work equally as well on soft and hard granite. Manufactured with ARIX Diamond Arrangement technology, these bits typically last twice as long and cut 30% faster than traditional diamond tools. S43AX Finger Bits are fast cutting on the hardest of stone while also giving superior life.

High performance, long life on CNC machines.

S43AX Finger/Router BitsPro IV D

Diameter & Width Part No. List3/4 x 40mm x 1/2 gas (male) - 5 seg D66242 $1657/8 x 40mm x 1/2 gas (male) - 5 seg D66243 1871 x 40mm x 1/2 gas (male) - 6 seg D66241 1991 x 48mm x 1/2 gas (male) - 6 seg D66244 2101 x 40mm x 1/2 gas (male) - 6 seg D66092* 220 1 x 48mm x 1/2 gas (male) 6 seg D66093* 2381 x 48mm x 1/2 gas (male) 6 seg D66250*has bottom “starter segment

S43AX Finger/Router Bits

S33 Finger/Router Bits

S33 Finger/Router BitsSuper Premium D

Diameter & Width Part No. List1 x 48mm x 1/2 gas (male) 6 seg D66090 $1941" x 40mm x 5/8"-11 female D66238 218

S43VT Vacuum Bond Finger Bit

S43VT Vacuum Bond Finger BitPro IV D

Diameter & Width Part No. List15mm x 40mm x 1/2 gas (male) D66301 $14915mm x 48mm x 1/2 gas (male) D66302 167

Vacuum brazed fi nger bit with 1/2 gas adapter. Use for cutting and profi ling marble and softer stones. Central water feed with holes drilled to keep the bit cool during cutting.

Finger Bits

SRT31 Radial Arm BitsSuper Premium D

Diameter Part No. List20mm x 15mm D66131 $96Mandrel 4 x 1/2 Gas D66130 149

SRT31 Radial Arm Bits

For use on radial arm machines for sink cutouts. The diamond tip is threaded for easy bit changing, and the bond is designed to cut even the hardest of stones.

Use for high-performance cutting in fabrica-tion applications. Designed specifi cally for shaping granite. Great for cutting sink holes and profi ling corners on CNC machines.


These wheels are designed to profi le and cutin one pass. The special design enables it to cut while profi ling at the same time. The PWM electroplated wheel is designed for marble and softer stones while the PWG wheel is designed for harder granite and stone.

Position 1 wheel - manufactured with ARIX technology giving maximum productivity and high quality profi ling. Use on many different types of machines such as Stinger, Flex Hercules and Ghines series routers.

Profi le Wheels and Router BitsProfi le Wheels for Marble and Granite

Profi le Wheels for Marble and GraniteMarble Granite

Premium Super Prem DDiameter & Width Part No. Part No. List6" x 5/8", 1/2" R Dupont D63002 D63005 $1576" x 5/8", 3/8" R Dupont D63006 1578" x 5/8", 1/2" R D63013 2288" x 5/8", 1/2" R D63015 D63012 228

RB43 Router/Profi le Bits Pro IV D

Diameter & Width Pos. Profi le Part No. List20mm Demi-Bull 1 B D66176 $39225mm Demi Bull 1 B D66277 48230mm Demi-Bull 1 B D66042 53620mm Full-Bull 1 V D66044 45130mm Full-Bull 1 V D66045 51240mm Full-Bull 1 V D66165 Call60mm Full-Bull 1 V D66057 Call20mm Ogee 1 F D66047 38125mm Ogee 1 F D66167 56230mm Ogee 1 F D66350 46420mm Bevel 1 E D66058 38130mm Bevel 1 E D66262 52720mm Bullnose 1 A D66297 39230mm Bullnose 1 A D66308 57120mm DuPont 1 H D66288 39825mm DuPont 1 H D66291 52230mm DuPont 1 H D66294 65315mm Cove 1 L D66340 35720mm Cove-DuPont 1 O D66337 41625mm Cove DuPont 1 O D66306 45220mm Cove Ogee 1 Q D66339 47625mm Cove Ogee 1 Q D66059 52330mm Cove Ogee 1 Q D66060 59525mm Triple Demi 1 TB D66311 52240mm Talon Z 1 TZ D66274 374

More sizes, positions and shapes available upon request!

RB43 Router/Profi le Bits

PSW 4 Profi le Wheel Super Premium with 5/8-11 Adapter D

Description Part No. ListProfi ler, Granite - 3/16R D63009 $289Profi ler, Granite - 3/8R D63010 312Profi ler, Granite - 3/4R D63011 3361/4 Radius 130243 2103/8 Radius 130244 2451/2 Radius 130245 2753/4 Radius 130246 345Full Bull 40mm 130247 80045 Degree x 10mm 130336 22945 Degree x 5mm 130337 193Full Bull 30mm 130339 309Ogee 3/8 F 130248 309Ogee 3/4 F 130249 450

PSW 4" Profi le Wheel

Handheld vacuum brazed profi le wheel for popular edge styles for granite, engineered stone, brick and masonry. 5/8"-11 thread for angle grinders.

Shapes


S33 Smooth Face Resin Filled Cup Wheels

S33 Smooth Face ResinFilled Cup Wheels

Super Premium DDiameter & Width Part No. List4 x coarse x 5/8 -11 D66063 $152 4 x medium x 5/8 -11 D66065 1524 x fi ne x 5/8 -11 D66089 152

CTC32 Continuous Turbo CupSuper Premium

Coarse Medium Fine30/40 60/80 100/120 D

Description Part No Part No. Part No. List4 x 5/8 -11 th D82002 D82004 D82006 $1585 x 5/8 -11 th D82014 D82016 D82018 1696 x 5/8 -11 th D82020 D82022 D82024 1807 x 5/8 -11 th D82026 D82028 D82030 300

CTC32 Continuous Turbo Cup

Excellent choice for fi nishing of hard materials including: granite, marble, tile, porcelain, refractory, light duty masonry and concrete. Comes in three grits - coarse, medium and fi ne.

S22 Vacuum Brazed Grinding WheelsPremium D

Description Part No. List4 Coarse x 5/8 -11 D66039 $148

S22 Vacuum BrazedGrinding Wheels

Provides extremely aggressive profi ling and material removal. Triangle cooling holes improve overall grinding performance.

Grinding WheelsThe resin fi lled cup grinding wheels provide aggressive, chip-free grinding and fi nishing. With metal bond segments and unique resin, these grinding wheels perform great on granite and marble. Choose from coarse (blue), medium (yellow) and fi ne (white) grits. Operators feel the difference when controlling the grinding.

S33 Flat Body Cup WheelSuper Premium

Coarse DDescription Part No List4 x 5/8 -11 th D82035 $1235 x 5/8 -11th D82038 1466 x 5/8 -11 th D82039 1696 x 5/8 -11 th* D82034 169*air-cooling holes

Flat body grinding wheel for fast, aggressive removal with a smooth fi nish on hard materials including granite, marble, tile, porcelain, refactory, light duty masonry and concrete.

PCD diamond particles are ultra tough and have three times the surface area of monocrystalline particles for aggressive surface removal.

Great for removing surface coatings including epoxies, mastic and glue.

PCDC-35 and 39 Cup Wheels

PCDC-35 and PCDC-39 Cup Wheels

DescriptionNo. of Chips Part No.

DList

PCDC-35 4 x 7/8 - 5/8 5 D83201 $199PCDC-35 4 x 5/8 - 11 9 D83203 149PCDC-35 5 x 5/8"-11 8 D83205 189PCDC-39 7 x 5/8 - 11 & 7/8 12 D83204 299

S33 Flat Body Turbo Cup Wheel


Step up to premium performance with these grinding wheels. Use when high-productivity is a priority, and for grinding of harder materials.

Use single row grinding wheels for rough work and rapid stock removal.

Use double row grinding wheels for fi ner fi nishing.

Use for fast, aggressive removal of concrete, stone and masonry materials. Can be used wet or dry and leaves minimal swirl marks.

Use CST33 for fast removal on hard material. Use CST36 for longer life on soft abrasive material.

These grinding wheels provide an excellent, economical way to grind a variety of hard materials such as concrete, stone and masonry.

Use single row grinding wheels for rough work and rapid stock removal.

Use double row grinding wheels for fi ner fi nishing.

CS14/CD14Cup Wheels

CS14, CD14 Cup Grinding WheelStandard

CS14 CD14Single D Double D

Description Row List Row List4 x 7/8 -5/8 D80001 $48 D80006 $764 x 5/8 -11 thread D80002 48 D80007 764.5 x 7/8 -5/8 D80025 65 D80026 924.5 x 5/8 -11 D80029 65 D80030 925 x 7/8 -5/8 D80003 92 D80008 1085 x 5/8 -11 thread D80023 92 D80024 1087 x 7/8 -5/8 D80004 103 D80009 1467 x 5/8 -11 thread D80005 103 D80010 146

CS33, CD33 Cup Grinding WheelSuper Premium

CS33 CD33Single D Double D

Description Row List Row List4 x 7/8 -5/8 D80011 $87 D80016 $1414 x 5/8 -11 thread D80012 87 D80017 1414.5 x 7/8 -5/8 D80027 103 D80028 1634.5 x 5/8 -11 D80031 103 D80032 1635 x 7/8 -5/8 D80013 119 D80018 1785 x 5/8 -11 thread D80033 119 D80034 1787 x 7/8 -5/8 D80014 178 D80019 2767 x 5/8 -11 thread D80015 178 D80020 276

CS33/CD33Cup Wheels

CST13/CST23Cup Wheels

Segmented Turbo Cup Grinding WheelsCST13 StandardCST23 Premium

DescriptionCST13

Part No.D

ListCST23

Part No.D

List4 x 9-10 seg x 7/8 -5/8 D81047 $55 D81001 $924 x 9-10 seg x 5/8 -11 D81035 55 D81002 924 x 18 seg x 5/8 -11 D81049 81 D81058 1384.5 x 9-10 seg x 5/8 -11 D81051 60 D81028 985 x 12 seg x 5/8 -11 D81003 1137 x 12 seg x 7/8 -5/8 D81034 90 D81004 1357 x 12 seg x 5/8 -11 D81036 98 D81005 1357 x 24 seg x 7/8 -5/8 D81055 157 D81008 2167 x 24 seg x 5/8 -11 D81056 157 D81009 216

Grinding Wheels

Use for fast, aggressive removal, with a smooth fi nish on concrete, stone and masonry materials. Perimeter is less likely to catch on edges. The Storm wheel is a favorite among professional contractors.

Segmented Storm Cup Wheels

Segmented Storm Cup WheelCST24 PremiumCST34 Super Premium

DescriptionCST24

Part No.D

ListCST34

Part No.D

List4 x 7/8 -5/8 D81037 $108 D81019 $1464 x 5/8 -11 thread D81038 108 D81020 1464.5 x 7/8 -5/8 D81039 125 D81021 1634.5 x 5/8 -11 thread D81040 125 D81022 1635 x 7/8 -5/8 D81041 146 D81023 1905 x 5/8 -11 thread D81042 146 D81024 1907 x 7/8 -5/8 D81043 195 D81025 2987 x 5/8 -11 thread D81044 195 D81026 298


High performance vacuum brazed wheels for grinding and leveling areas on concrete, natural and engineered stone. This is a very aggressive tool as the diamonds are fully exposed.

Brazed Diamond Grinding Wheels

Brazed Diamond Grinding WheelsA

Description4.5

Part No.A

List7

Part No.A

ListPosition O (25 Grit) 161027 $126 161021 $221Position 1 (30 Grit) 161028 108 161022 213Position 2 (40 Grit) 161029 100 161023 191Position 3 (50 Grit) 161030 100 161024 191Position 4 (100 Grit) 161031 100 161025 191Position 5 (200 Grit) 161032 100 161026 191

Vacuum Brazed Spike DiscsSuper Premium

35 Grit 80 Grit DDescription Part No. Part No. List4.5 162020 162021 $1205 with air holes 162022 162023 1407 162024 162025 195

TEQ-ZEK Grinding Wheels ADescription Grit Part No. List4.5 x 7/8 16 160142 $7.577 x 7/8 16 160143 9.73(priced each, packaged 5 per box) 8/10 and 24 grit also available5/8 -11 Adapter and nut (P/N 161779) $15.45 (P)

TEQ-ZEK wheels are made of silicon carbide and are aggressive and long lasting.

Type 27

TEQ-ZEK Grinding Wheels

TEQ-Zek wheels are made of very aggressive 16 grit, long lasting silicon carbide. Very effi cient for removal of surface coatings, eposies, paint, rust, stucco off concrete, metal or fi berglass. The backing of the wheel is solid plastic for durability and longer life.

Vacuum BrazedSpike Discs

Vacuum brazed diamond spikes offer a vacuum brazed diamond tool with small clusters of diamond to create a larger protrusion ideal for removing high build up non-abrasive coatings, urethanes, epoxies, polyaspartics, polyurea, glue and resins. It also offers more grinding points which can result in smoother grinding with fast speeds. 35 grit for use on concrete base. 80 grit for FRP, fi berglass, and steel base.

Grinding Wheels / Adaptors / Bushings

Blade Adapters Adapter PDiameter & Width Part No. List1/2 Gas Thread x 5/8"-11 short 150421 $301/2 Gas Thread x 5/8"-11 long 150329 825/8"-11 to 7/8" F-Arbor 130117 18.541/2 Gas Thread to 5/8" -11 F 150982 553/8" shank, 5/8"-11M 150217 301/2" shank, 5/8"-11M 150983 27

150421

130117

150982150217

Blade Bushings PDiameter & Width Part No. List7/8" - 5/8" Thick 120127 $1.087/8" - 5/8" x.050" thick 120020 1.087/8" - 3/4" x .045" thick 157534 1.087/8" - 20mm x .050" 120126 1.081" - 20mm x .075" thick 120019 1.0860mm - 50mm x .087" 120128 9.7360mm - 1" x .087" thick 120003 3.2460mm - 1" x .075" thick 120004 4.33

Blade Bushings


FeaturesAbility to change between wet and dry vacuuming without stopping to change fi ltersPatented fi ltration system enablescleaning of internal fi lters without opening the unit to keep dust inside the canister.Patented fi ltration system designed specifi cally to contain extremely fi ne dust from dry wall and concrete cutting.Optional disposable patented micro-prefi lter that keeps secondary and primary fi lters cleanMachine-washable fabric fi lters designed to last the life of the machine.Quiet operation - 81 decibelsPowerful suction that drops off very little as fi lters get full: 72 water lift compared to 30 to 40 on other vacs.Does not blow dust on startup.Automatic shut-off when full of water to protect fi lters and motor.Regulating drain valve12’ crush proof hose can be used for pick up or draining.

Patented Filter System

Cleaning Agitator Rod

SecondaryFilter

Filter support connects to Agitator Rod

PrimaryFilter

Check ball prevents water from rising into HEPA fi lter and motor housing

Dustless Vacuums have machine washable fabric primary and secondary fi lters designed for lifetime use. These fi lters stay dry at all times and can be cleaned by wiggling the exclusive agittor rod on the top of the unit. No need to open the vacuum and let dust escape.

The optional Micro-prefi lter adds 5 layers of fi ltration, capturing particles down to 0.5 microns. The Micro-prefi lters protects the primary and secondary fi lters, eliminating the need to clean them. It retains its strength when wet and is disposable.

The HEPA vac model features a HEPA fi lter in place of the secondary and primary fi lters. It captures airborne particles down to 0.3 microns for the ultimate in dust containment.

DustBuddie• Includes 18 hose• Captures up to 99% of dust• Complies with EPA regulations covering

lead paint removal when used with a HEPA certifi ed vacuum

• Fits most 4 -9 hand grinders• Quick & Easy to install - simple band

clamp with spring actuated adjustment• Three adjustable spring screws control

height to accommodate different grinding wheels

• Clear polycarbonate for visibility and durability

• Removable front edge of shroud for grinding close to wall or edge

RemovableFront Edge

Brush Skirt

Snap on Cover Plate

Dustless Vacuum SpecsStd Vac HEPA

Specifi cations 16 WDInches Water Lift 72CFM 116Volts 110Watts 1324 peakAmps 11.5RPM’s 23,000Vac Only Part No. 162251 160071List E $380 $559

DustBuddie (clear)

Description5"

Part No.7"

Part No.E

ListDustBuddie w/18hose

160242 160327 $125

Cover Plate 160224 160328 14.0618 Hose 160091 21.00

5-piece Tool Set can be stored on vacuum and Includes:• One 12’ crush/kink proof hose• 14 wide fl oor tool• 1.5 crevice tool• Two 19 extension wands

• Designed with replaceable brushes to keep replacement costs down.

• Trim shroud for use in tuckpointing, crack chasing and decorative cutting applications. (Snap on cover plate required.)

Dustless Vacuum Systems

Improvedfor 2015!

Dustless Standard and HEPA Vacuums


BitBuddie• Flexible, translucent rubber dust shroud • Captures dust and slurry• Suction holds it in place• 1-3/8 is excellent for tight places like drilling

faucet holes in stone countertops

CutBuddie III Dust Shroud

Simply push in tab and slide the plate to the hole corresponding with the depth of cut desired - no tools needed! 7 shroud is adjustable in 1/4 increments from 1/4to 1-1/2 (5 shroud adjustable from 1/4to 1.2 ).

For decorative concrete cutting, tuckpointing or crack chasing Comes ready to use with 1 clear poly carbonate shroud 1 18 fl exible hose 3 spacers for blade centering 1 arbor extender 1 releasable zip tie

Dustie• Flex-Flange™

universal connecting collar for fast, easy installation on all major makes of hand grinders. Simply slip it on and tighten band clamp.

• 5 size fi ts most 4 -5hand grinders

• 7 size fi ts most 6 -9 hand grinders• Captures 99% of

airborne dust.• Trim shroud for use in crack chasing and tuckpointing applications. (Must use

snap on cover plate over open face when tuckpointing.)

CutBuddie III E Description Part No. List5 CutBuddie w/18 hose 161781 $1637 CutBuddie w/18 hose 161782 200

DustieDescription

5"Part No.

7"Part No.

EList

Dustie 160321 160322 $38.00Cover Plate 160224 160328 14.0618 Hose 160091 21

BitBuddie EDescription Part No. List1-3/8 dia. bits w/hose 160220 $531 to 4 dia. bits (round) w/hose 160979 532-8 dia. bits (round) 161625 61

Dustless Vacuum Systems

Accessories/Attachments Description Part No.

P List

WD Filter package wet/dry lifetime 160089 $46WD Filter master pk (pkg. 5 Pri & Sec) 160090 209HEPA Filter 160074 192HEPA Filter cover 160233 35Micro pre-fi lter bags (qty of 10 fi lter bags) 160072 104Micro pre-fi lter bags (qty of 20 fi lter bags) 160076 202Micro pre-fi lter bags (qty of 2 fi lter bags) 160123 266’ Hose 1-1/4 Diameter 160092 2625’ x 2 Flexible hose w/coupler 160093 147Splitter, Y- 2 x 2 x 2 160105 16.48“Y hose stub (req’d with 160105) 160235 232 hose to 2 hose coupler 161107 8.652 Core Drill Shroud w/hose 160085 693 Core Drill Shroud w/hose 160086 87Turbo Carpet Tool 160154 114

DITEQ Dust Shroud

• Economical and versatile• With adjustable clamp fi tting can be used on hand grinders• Requires extension adapter (No.130117) when used with diamond blade

DITEQ Saw Shrouds and AccessoriesDescription Part No. List E5 Shroud 5 x 2 w/18 hose 160146 $555 Shroud 5 x1-5/8 160319 295 Shroud 5 x1-5/8 w 18 Hose 160145 55Ban clamp 1-5/8 160320 3.24 P5 Shroud only 5 x 2 160219 33Ban clamp 2 160253 3.24 P5 Shroud 5x1-5/8 w/18 Hose/cover 160165 70Adapter Extender Blade 5/8-11 -11F x 7/8 Bore 130117 18.5418 hose 160091 21

Dust Shroud Without Vacuum

Dust Shroud With Vacuumus S ouo dd acuu


Wet Polishing Pads

Grit

Premium Super Premium4

Part No.D

List4

Part No.D

List5

Part No.D

List50 D64082 $14.42 D64010 $22 D64019 $40100 D64083 14.42 D64011 22 D64020 40200 D64084 14.42 D64012 22 D64021 40400 D64085 14.42 D64013 22 D64022 40800 D64086 14.42 D64014 22 D64023 401500 D64087 14.42 D64015 22 D64024 403000 D64088 14.42 D64016 22 D64025 4010000DF(Blk) D64089 21.00 D64017 25 D64026 4510000DF(Wht) D64090 21.00 D64018 25 D64027 45Complete Set D64091 126.00 D64070 181 D64028 336

Wet Polishing Pads These fl exible polishing pads feature a high diamond concentration that provides the user with excellent results in a short period of time. Great for granite, hard marble & porcelain and delivers a superior shine.

Dry Polishing PadsSuper Premium

Grit4"

Part No.D

List50 D64040 $29100 D64041 29200 D64042 29400 D64043 29800 D64044 291500 D64045 293000 D64046 2910000DF(Blk) D64047 2910000DF(Wht) D64048 29Complete Set D64071 250

Dry Polishing Pads

3 Step Wet Polishing PadsSuper Premium

4" DDescription Part No. ListStep 1 D64054 $36Step 2 D64055 36Step 3 D64056 36

3 Step Wet Polishing Pads With these 3 step polishing pads you can

save time and money without sacrifi c-ing a quality polish. Good for use as a stand alone polishing pad or for use after polishing on a CNC. For use on granite, engineered stone and marble.

Backer Pads (5/8 -11 threaded) PRubber Part No. List3 Standard Flex 130119 $13.394 Super Flex 130338 24.004 Standard Flex 130120 10.304 Rigid 130335 10.304 Extreme Flex 130510 24.005 Standard Flex 130121 36.007 Standard Flex 130520 44.00Aluminum Part No. List3 Aluminum 130522 24.004 Aluminum 130511 24.005 Aluminum 130512 39.007 Aluminum 130521 72.00

Backer PadsDITEQ offers a wide variety of backer pads in various sizes and fl exibility.5/8 -11 threaded with velcro backing

Great for dry polishing of engineered stone, quartz surfaces or granite.

Polishing


Hand Polishing Pads Premium D

Grit Part No. List50 Grit 130375 $40100 Grit 130376 40200 Grit 130377 40400 Grit 130378 40800 Grit Resin 130380 281500 Grit Resin 130381 283000 Grit Resin 130382 28

SNL Snail LockGrinding Wheels

Super Premium D 4 5 ListGrit Part No. List Part No. 12950 Grit 130574 117 130566 129100 Grit 130575 117 130567 129200 Grit 130576 117 130568 129500 Grit 130577 117 130569 1291000 Grit 130578 117 130570 1292000 Grit 130579 117 130571 1293000 Grit 130580 117 130572 129BUFF 130581 117 130573 129

SNL Snail Lock Polishing Pads

Hand Polishing Pads These foam backed diamond hand pads are designed for manual use both on edges and surfaces. These lightweight and fl exible pads are great for fi nal touchups at the jobsite. They perform with superior speed and consistency and are very long lasting. These pads measure 2-1/4 x 3-3/4 .

PolishingSnail lock grinding wheels create the straight-est possible fi nished edge. It allows very rapid and easy grinding for minimal downtime. It is designed for fast grinding and shaping of granite surfaces, corners, edges and angles.

Diamond Sanding Pads

Diamond Sanding Pads 4" D 5" D 7" D

Grit Part No. List Part No. List Part No. List50 161542 $50 160633 $77 161882 $14070 161543 50 160634 77 161883 140120 161544 45 160635 65 161884 110220 161545 45 160636 60 161885 95400 161546 40 161880 52 161886 90600 161547 40 161881 52 161887 90

With 100% diamond exposure this electroplated velcro backed sanding pad provides fast and aggressive removal rates. These pads can be used on stone, tile and other hard materials.


SlurryDry Slurry Gel A ADescription SlurryDry-QS List SlurryDry-LS List50-lb bag 100539 $1,164 100562 $1,1304 gal bucket 100542 613 100563 595QS - Quick Solidifi cationLS - Low Solids Slurries 4 gallon buckets weigh approximately 25 lb.

SlurrySep Floc Agent A ADescription SlurrySep List SlurrySep-PH List50-lb bag 100540 $839 100541 $1,1644 gal bucket 100543 453 100544 613

SlurrySep SlurryDry

Slurry Treatment

With two simple steps you can convert slurry to a gelled, non-fl owable solid.

First step is to mix SlurrySep into the slurry to separate from the solids and agitate again. After the water and the slurry solids have separated, the water is drained from the solids.The second step is to mix the SlurryDry with the remaining slurry solids. This product encap-sulates the remaining water and slurry into a non-fl owing solid gel-like substance.

SlurryDry is super absorbant and is capable of absorbing up to 250 times its weight in water with less than 1% swell. This product is non-biodegradable and non-exothermic.

Slurry Treatment

.393 seg. height

DX-S Universal Segmented BladeEconomy, Fast Cut

Cured Concrete/Brick/Block DDiameter & Width Part No. List4 x .080 x 7/8 -5/8 D96205 $224.5 x .080 x 7/8 -5/8 D96206 255 x .080 x 7/8 -5/8 D96220 306 x .080 x 7/8 -5/8 D96221 427 x .080 x DM-7/8 -5/8 D96207 478 x .085 x DM-7/8 -5/8 D96222 609 x .095 x 7/8 -5/8 D96223 6610 x .095 x DM-7/8 -5/8 D96208 83

DX-S UniversalSegmented Blade

DX-T Wide Turbo Rim BladeEconomy, Fast Cut D

Diameter & Width Part No. List4 x .095 x 7/8 - 5/8 D96209 $21 4.5 x .095 x 7/8 - 5/8 D96210 24 5 x .095 x 7/8 -5/8 D96224 30 7 x .095 x DM-7/8 - 5/8 D96211 47 9 x .095 x 7/8 -5/8 D96225 7810 x .110 x 7/8 - 5/8 D96213 90

.275 seg. height

DX-T UniversalTurbo Blade

PDiamond Wire Accessories Part No. ListCrimps (3/16 ID x 3/8 OD x 3/4 L) 151157 $1.08

Diamond Wire for StoneStone-Urethane DDescription Part No. ListWS40 D91033 $300Prices per meter length.

Diamond Wire for Stone

Slurry Treatment / Diamond Wire / DX Blades

DITEQ carries diamond wire for cutting hard stones in quarries. Its sold by the meter and continuous loops are available. Please call with project application details for further recommen-dations.

Use for cutting a range of concrete, brick, block and stone. Segmented blades that tend to provide a longer life but rougher cut when compared to turbo and continuous rim diamond blades. Use on hand-held high speed saws, masonry saws and right angle grinders.

DX-T turbo blades are ideal for general purpose cutting on a range of concrete, masonry and stone materials. Turbo style rim will give a clean-er and faster cut as compared to segmented diamond blades. Use on hand-held high speed saws, masonry saws and right angle grinders.


Stone Cutter C/S-33GDSuper Premium

Fast Cut/Longest Life DDiameter & Width Part No. List12 x .125 x 20mm DP D11069 $36312 x .125 x 1"-20mm DP D11067 36314 x .125 x 20mm DP D11070 40614 x .125 x 1"-20mm DP D11068 40616" x .125" x 1"-20mm DP D11079 487

DITEQ Stone Cutter

M22 Stone & Hard Material BladePremium D

Diameter & Width Part No. List8 x .110 x DM-7/8 -5/8 D60001 $14810 x .110 x 1 - 5/8 D60028 18712 x .125 x 1"-20mm D60009 22114 x .125 x 1"-20mm D60010 25514 x .125 x 60-50mm D60039 26820 x .135 x 1 D60027 51220 x .135 x 1 * D60037 710*Silent Core

M22 Stone & Hard Material Blade

A premium segmented laser-welded diamond blade for cutting marble, natural stone and extremely hard brick. 60/50mm arbor on request.

SV ARIX Thin VeneerMaterial Blade

PRO IV

Diameter & Width SV51AXPart No.

SV51AXPart No.

SV52AXPart No.

DList

40 x.250 x13mmx3-1/4 D61103 D61105 D61104 $3,800

SV ARIX Thin Veneer

Thin Veneer Silent Turbo

Thin Veneer Silent TurboSuper Premium D

Diameter & Width Part No. List20 x .145 x1 (B31ST) D44113 $69320 x .135 x 1 (S-42AX) D44137 800

DITEQ developed this blade specifi cally to cut dry through hard stone materials using high speed saws, hydraulic hand saws, or masonry brick and block saws.

The DITEQ Stone Cutter blade utilizes ARIX diamond arrangement technology that strategi-cally places each diamond particle throughout the segment and will outperform competitive blades by giving both better speed and longer life. The Stone Cutter gains optimal segment strength with high quality titanium coated diamonds and the air-cooled structural core prevents overheating.

DITEQ’s Thin Stone Veneer blade was de-veloped specifi cally for production sawing on conveyor style thin stone processing and cutting machines.

Designed for thin veneer, this blade can cut soft to hard stone including limestone. ARIX blades typically cut 50% faster and last 30% longer than conventional diamond blades. The thin stone veneer blade has ARIX turbo segments and can be retipped for longer blade life.

Designed to cut hard to soft stone including limestone thin veneer. This silent core blade features laser cut, resin-fi lled relief patterns that muffl e vibration to reduce noise.

The B31ST has regular and turbo segments while the S-42AX has slanted ARIX™ segments. For use on brick/ block saws as well as bridge saws.

Thin Veneer Diamond Blades

Retipping Services Available

5/2015

9876 Pflumm Road • Lenexa, KS 66215Phone 866-688-1032 • Fax 877-220-4777

Documents

2015 DITEQ Tile and Stone files/2015 DITEQ Tile and Stone.pdf · ARIX Technology ARIX Technology places diamond particles in three ... tile and stone cutting ... The M32 diamond bond