2015 Current Resume for Angus Ferrier

  • View
    268

  • Download
    12

Embed Size (px)

Transcript

  1. 1. RESUME Angus Ferrier 576 Safety Bay Road WAIKIKI WA 6169 D.O.B: 21/09/72 Mobile: 0434 974 286 Email: angusferrier@hotmail.com January 2015 to Current Hertel Modern Barrow Island Industrial Blaster/Painter Abrasive Blasting and Painting Structural Steel Mark up between coats using DFT Mechanical prep pipes and brackets Abrasive blast pipes and brackets Roll, brush and conventional spray Encapsulate job area September 2014 to December 2014 Ultimate Protective Coatings Port Hedland WA (FIFO) - Blaster/Painter (QA & QC OFFICER) EXPERIENCE IN USING *NEW* TAR REMOVAL MACHINE (RPR RAPID PAINT REMOVAL) THROUGHINDUCTION DISBONDING TECHNOLOGY Level 1 Operator RPR Machine Level 2 Operator RPR Machine Abrasive Blasting and Painting Structural Steel Abrasive Blasting and Painting Ship Loader Booms Abrasive Blasting and Painting Stacker/Reclaimers Abrasive Blasting and Painting Trestles Abrasive Blasting and Painting Pylons Abrasive Blasting and Painting Off Shore and On Shore Painting using International Paints 356 Primer & 954 Topcoat Scope future repairs Use replica tape to gauge blast profile Mark up between coats using DFT Scope work for the day or small shutdowns where corrosion protection work only will be conducted High Risk work out of EWP/Crane scope and clean using water washer or wet head also blasting and painting
  2. 2. September 2013 to September 2014 McElligotts Hay Point Expansion Phase 3 Project LEADING HAND (QA & QC OFFICER) I am in charge of up to 6 crew members organizing, delegating, monitoring and documenting work done daily. Current holder of PBS CHAMPION Certificate of Achievement Bechtels Behaviour Observation Team Training. Using and Completing Daily Coating Inspection Reports which include: Weather conditions / Ambient and substrate temperatures / Surface preparation method used / Paint types / Paint batch numbers / Method of application / Wet Film or dry film (DFT) Making sure the crew works in a safe and professional manner and works well with other trades Liaison with other trades and supervisors on variations to scope of work for (surge bin 3, uptake tower 37AP, CV37AP and sample lab tower) Organise set up of job fronts (JLG, working at heights, groundwork) Fill out permits e.g. Working at heights and Confined space when required Organize JLG job fronts (machines, operators and spotters) Complete Daily time sheets Review JSAs and ITPs with crew regularly Measure Ambient and substrate temperatures daily Measure Humidity and dew point daily Measure DFT readings between coats and final coats when required Download data onto elcometer software for creating reports Measure Ancor profile after blasting Complete Salt testing when required ITP Inspection and test plan followed in accordance to the standards provided in the ITP Also making sure ITP are monitored and work is within ITP guidelines Competent skills and knowledge in computers January 2012 to September 2013 Giovenco Dalrymple Bay Coal Terminal Abrasive Blasting and Painting Structural Steel Abrasive Blasting and Painting Ship Loader Booms Abrasive Blasting and Painting Stacker/Reclaimers Abrasive Blasting and Painting Trestles Abrasive Blasting and Painting Pylons Abrasive Blasting and Painting Off Shore and On Shore Painting using International Paints 356 Primer & 954 Topcoat Scope future repairs for boilermakers and corrosion protection - obtained repair information with photos to be located on schematics drawings where repairs need to be fixed Use replica tape to gauge blast profile Mark up between coats using DFT Scope work for the day or small shutdowns where corrosion protection work only will be conducted High Risk work out of EWP/Crane scope and clean using water washer or wet head also blasting and painting Obtained repair information with photos to be located on schematics drawings where repairs need to be fixed
  3. 3. 2006 to January 2012 - Paint Safe Mackay Abrasive Blasting and Painting protective coatings on mine sites Abrasive Blasting and Painting wash plants both new construction and old plants Abrasive Blasting and Painting dump trucks, tanks and handrails I worked at the Thomas Borthwicks & Sons Meat Works, autonomously managing the plants corrosion problems using abrasive blasting, hand preparation and applying the appropriate proactive coatings for each different environment and working area. I worked at various Mine Sites in the Bowen Basin: Moranbah North Coal Mine Contract Work Millenium Mine Construction Work Riverside Mine Contract Work North Goonyella Mine Contract Work Blackwater Mine Shutdown Work Arrow Energy Moranbah Project Contract Work I worked at Port of Mackay Grain and Sugar Terminal Contract Work I worked at Sugar Mills in Mackay Raceourse Mill Shutdown Work 2006 2003 Ocean Fast/Image Marine Ship Yards Western Australia Preparing and applying International Protective coatings to aluminum mega yachts Fairing mega yachts Aluminum fabrication and welding Trades Assistant Fabricating and welding gussets, floors and fabricated doors Personal Skills and Abilities: Critical thinking, decision making and problem solving skills Negotiating skills Conflict resolution skills Adaptability efficient under pressure, always meets deadlines Strong verbal and personal communication skills Analytical thinking and planning skills Accuracy and attention to detail Organization and prioritization skills
  4. 4. Paints, Equipment and Instruments Used: These are some of the paints I have used: International 52 Zinc 315 Zinc 220 Primer 251 Primer 356 Primer 990 Topcoat 629 Topcoat 740 Topcoat AWL grip AWL craft 2000 topcoat 954 Finish Coat 1150 Finish Coat Ammeron 2K/400 Primmer 220 Enamel I have used the following equipment: RPR RAPID PAINT REMOVAL MACHINE TAR REMOVAL THROUGH INDUCTION DISBONDING TECHNOLOGY - Level 1 Operator RPR Machine - Level 2 Operator RPR Machine Blasting Gear small to large single and double stage hoppers Painting Gear conventional spray guns and airless guns Air Compressors I have used and own some of the following Instruments: Elcometer 456 (have my own) Digital Profile Gauge Bresle Patches Sling Hydrometer (have my own) Replica Tape (have my own) Holiday Testing Certificates & Tickets: Level 1 Operator RPR Machine Level 2 Operator RPR Machine Certificate - Use Hand and Power Tools - R11SAM203A Certificate Conduct Fire Operations R11ERR201A Statement of Attainment PRMPFES03C Safely move materials and loads in the workspace Statement of Attainment PUAWER008B Confine small workplace emergencies Statement of Attainment Undertake Manual Handling MEM11011B
  5. 5. Statement of Attainment - Enter and Work in Confined Spaces R11OHS202A Statement of Attainment - Work Safely in the Construction Industry CPCCOHS1001A Statement of Attainment Work Safely at Heights RIIOHS204A Statement of Completion Basic Fire Awareness Statement of Completion BMA Coal SOP QC-PST290-00 Hazardous Work Statement of Attainment Safely access the rail corridor TLIF2080C Statement of Completion - Dalrymple Bay Coal Terminal Confined Space Documents Working in Confined Spaces Standard 050 Confined Space Entry Procedure Confined Space Entry Permits Generic Rescue Plans for Confined Space Statement of Completion Dalrymple Bay Coal Terminal Standard 040 Safe Work at Heights The Use of Span set Gotcha Kit Statement of Attainment Operate Elevating Work Platform MNCG1049A Completed Course in General Safety Induction (Construction Industry) 30215QLD Additionally completed parts of: Section 11 Training and Competence from AS 2865-2001 Safe Working in Confined Space Statement of Completion BMA Hay Point Coal Terminal Site Induction Course Statement of Completion BMA Induction Statement of Attainment - BMA Induction - (STANDARD 11 INDUCTION/GI SAFETY INDUCTION PASSPORT) RIICOM201A Communicate in the workplace RIIERR205A Apply initial response first aid RIIERR302A Respond to local emergencies and incidents RIIGOV201A Comply with site work processes/procedures RIIOHS201A Work safely and follow OHS policies and procedures RIIRIS201B Conduct local risk control Statement of Attainment- (STANDARD 11 INDUCTION/GI SAFETY INDUCTION PASSPORT) RIICOM201A Communicate in the workplace RIIERR205A Apply initial response first aid RIIERR302A Respond to local emergencies and incidents RIIGOV201A Comply with site work processes/procedures RIIOHS201A Work safely and follow OHS policies and procedures RIIRIS201B Conduct local risk control Statement of Attendance McElligotts Quality Systems Training in accordance with ISO 9001:2008 Coal Mine Workers Health Scheme Coal Board Medical 2014 Safety Certificate: PBS CHAMPION Certificate of Achievement Bechtels Behaviour Observation Team Training Champion
  6. 6. Trade Certificates: Certificate 111 in Engineering - Fabrication Trade (Surface Finishing) MEM30305 Supervisor Certificates: Statement of Attainment RIICOM301B Communicate information - (G9) RIIOHS301A Conduct safety and health investigations (G8) RIIRIS301B Apply risk management processes (G1) Statement of Attainment RIIRIS402A Carry out the risk management processes (G2) NACE International Institute Certificates of Achievement: NACE Coating Inspector Level 1 Certified CIP Certification Number 48709 NACE Coating Inspector Level 2 Certified CIP Certification Number 48709 Licenses and Cards: Open Drivers License Class C Western Australian Boat License Western Australian MSIC Card (Maritime Security Identification Card) Blue Card Course in General Safety Induction (Construction Industry) White Card Occupational Health and Safety Construction Induction License to Perform High Risk Work Confined Space Safety Training Work Safely at Heights Training HPX3 Project Trestle Access Mc