Embed Size (px)
Citation preview
2015 Course Schedule
Educational and Instructional Training for the HVAC Industry
Long Island
245 Newtown Rd, Ste 500
Plainview, NY 11803
718-269-3506 Phone
New Jersey
19 Chapin Road
Pine Brook, NJ 07058
718-269-3600 Phone
Training Site Locations and Registration Information:
New York
45-18 Court Square
Long Island City, NY 11101
718-269-3600 Phone
Tracer SC™ Operation
In the Tracer SC™ Operation course, students learn to operate and modify an installed Tracer SC™ system. This highly interactive course includes presentations and hands-on workshops where students practice using the software applications integral to a Tracer SC™ building management system.
At the end of this course students are able to:
Monitor and control building mechanical systems
Respond to alarm conditions
Create custom alarms
Generate reports and data logs
Create custom time-of-day schedules
Learn how time-of-day, area, and variable air system applications work together to control your air side systems.
Respond to hot and cold calls
Utilize contract documentation to identify control component locations.
(Trane control drawings and mechanical prints)
You can earn
2.6 CEU credits
New York 7:30 AM– 5:00 PM
February 17-19
Fee: $1000 per person
Includes: All literature and a full breakfast and lunch
Page 2
Generic LonTalk Devices (GLDs)
Alarm and message routing
Graphics
Time of Day Schedules
Introduction to the Area Application
Introduction to the Comm4 Variable Air Systems (VAS) application
Tracer Summit software installation/registration
Site configuration
BCU installation
Ethernet LANs
Tracer Summit 101 Tracer Summit 101 is a “hands on” course that provides the student with the skills needed to program and troubleshoot a Tracer Summit System. (Prerequisite for Tracer Summit 102) The following subjects are covered in this class: You can earn
3.5 CEU credits
Long Island 7:30 AM– 5:00 PM
January 26-30 Fee: $1800 per person
Includes: All literature and a full breakfast and lunch
New Jersey 7:30 AM– 5:00 PM
October 6-8
Page 3
Tracer SC™ Air Systems Students will use a typical Trane project, including standard Trane control drawings and typical mechanical prints, and have the opportunity to carry out the tasks necessary to configure, troubleshoot and maintain an HVAC air system.
At the end of this course students are able to:
Install and configure a Tracer SC
Install, configure and control LonTalk devices on a Tracer SC VAV link
Install, configure and control BACnet devices on a Tracer SC VAV link
Identify the major components and functions of constant volume and VAV air systems
Assess the appropriate locations and application of different types of VAV boxes
You can earn
3.5 CEU credits
Long Island 7:30 AM– 5:00 PM
September 21-25 Fee: $1800 per person
Includes: All literature and a full breakfast and lunch
New York 7:30 AM– 5:00 PM
March 16, 20
Tracer SC™ Central Plant Control
A typical central plant project, including standard Trane control drawings and typical mechanical prints, provides students the opportunity to carry out the task necessary to configure, troubleshoot and maintain a central plant. Programs will be written to control chilled water, condenser water and hot water systems within the plant.
At the end of this course students are able to:
Identify the major components and functions of a central plant.
Assess the appropriate location and application of valves and sensors.
Apply the Tracer SC Chiller Plant Control application.
Integrate TGP2 with CPC for ice making, tower optimization, cooling tower control, pump sequencing and boiler control.
You can earn
2.2 CEU credits
Fee: $1200 per person
Includes: All literature and a full breakfast and lunch
New Jersey 7:30 AM– 5:00 PM
November 10-12
www.tranenynj.com
Page 4
Tracer ES Operation Tracer ES Operation is specifically designed for building operators and administrators to become more efficient with their Tracer ES software (a web-enabled service and monitoring tool for multiple building facilities). Tracer ES allows building operators and administrators access from the local network or the internet to monitor and control their building system. Students will have the opportunity to work with the Tracer ES software to become more familiar with common tasks.
At the end of this course students are able to:
You can earn
1.2 CEU credits
Fee: $600 per person
Includes: All literature and a full breakfast and lunch
New York 7:30 AM– 5:00 PM
August 11-12
Tracer ES Installation & Programming
Provides participants with the understanding of Tracer ES software which is a Web-enabled service and monitoring tool for multiple building facilities. After Tracer ES is installed and configured, building operators and administrators can access the Tracer ES from the local network or the Internet to monitor and control the building system.
At the end of this course students are able to:
You can earn
2.6 CEU credits
Fee: $1550 per person
Includes: All literature and a full breakfast and lunch
Long Island 7:30 AM– 5:00 PM
October 20-22
User management
Status and overrides
Working with schedules
Alarm processing
Data logging
Custom reporting
Configure a Server
–Setup internet information services
–SQL database installation
–SQL backup and recovery
–Tracer ES Installation
Tracer ES Functionality
–Manage graphics
–User management
–Status and overrides
–Working with schedules
Fee: $1550 per person (10% off for each registration
received at least 60 days before the start of class)
Includes: All literature and a full breakfast and lunch
Long Island 7:30 AM– 5:00 PM
October 27-29
Page 5
Tracer ES Installation
Tracer ES software is a Web-enabled service and monitoring tool for multiple building facilities. After Tracer ES is installed and configured, building operators and administrators can access the Tracer ES from the local network or the Internet to monitor and control the building system.
Following successful completion of this course, the student will be able to configure and install a typical Tracer ES project. Student will be able to:
Configure a Server
Tracer ES Functionality
You can earn
2.6 CEU credits
Tracer Graphical Programming 2 (TGP2) Advanced Applications***
The TGP2 Advanced Applications course provides participants with the ability to create and implement custom configurations and programs in the Trane’s Tracer BACnet devices. Course scope includes device configuration, TGP2 program creation, and TGP2 Library usage for the Tracer SC, Tracer UC400. (Other devices will be supported as they are released, i.e. Tracer UC600). The class includes hands-on workshops so students can learn best practices, create, test and debug their programs under the supervision of experienced programmers.
At the end of this course, students are able to:
Identify the need for a TGP2 program
Convert a TGP program to a TGP2 program
Create point configurations from a job submittal
Identify appropriate TGP2 blocks for programming functions
Create TGP2 programs from a sequence of operation for Tracer UC products
Locate and use Standard Library TGP2 and Pre-Packaged Solutions configurations and programs
Implement TGP2 for custom applications such as air handler, boiler and pump controls
Implement TGP2 programming in Tracer SC
New Jersey 7:30 AM- 5:00 PM
April 13-17 ***Prerequisite: Completion of TGP2 Fundamentals
eLearning course is required.
Fee: $1800 per person
Includes: All literature and a full breakfast and lunch
You can earn
3.5 CEU credits
www.tranenynj.com
Air Conditioning Clinic The Air Conditioning Clinic is a comprehensive battery of 12 classes designed to give an overview of the entire HVAC industry. Each class deals with a specific area of the many
disciplines required to successfully design, install and service comfort providing equipment.
The classes are divided as follows:
Basic Refrigeration Cycle Reciprocating and Scroll Compressors Refrigerant System Piping Psychrometry The Cooling Load Estimate Variable Air Volume
This course is designed for the newly employed designer/engineer, the servicing technician, and the building operator trying to better understand their systems and also provides a good review for the more experienced student.
Upon completion of the course, the student will have a basic understanding of the various equipment and systems used in providing comfort cooling today, and be able to identify the various components. In addition, basic troubleshooting skills will be enhanced through a better understanding of the manner in which the components relate to each other in a system.
New York 5:30-7:30 PM
Mar. 24,26,31; Apr. 7,9,14,16,21,23,28,30 Grad: May 5
Long Island 5:30– 7:30 PM
Mar. 23,25,30; Apr. 1,6,8,13,15,20,22,27; Grad: April 29
New Jersey 5:30– 7:30 PM
Jan. 26; Feb. 2,9,16,23; Mar. 2,9,16,23,30; Apr. 6 Grad: Apr. 13
You can earn
2.5 CEU credits
Fee: $575 per person
Includes:
All literature
Framed Certificate of Completion
Light snack at each class
Page 6
Engineers Newsletter Live Be our guest … attend this Broadcast from Trane
Dates: To be announced
Topics: ASHRAE 62.1, Single-Zone VAV and All Variable-
Speed Plant Operation
Locations: New York, New Jersey and Long Island Fee: FREE
Lunch will be served
You may be able to
earn 1.5 CEU credits
A one day Absorption Chiller Operation Maintenance Seminar that presents an overview of the product, theory of operation and general maintenance guidelines. It is designed for operators and owners of Trane Absorption Chillers. Significant time is allotted for questions and answers with Trane Service Engineers.
New York 8:00 AM-4:00 PM
March 25
Fee: $400 for non-contract customers
FREE for Service Contract Customers
(Trane Service Clients please
contact your sales representative)
Includes:
- All Literature
- Full breakfast and lunch
Absorption Owner’s Operation and Maintenance Seminar
www.tranenynj.com Page 7
Intellipak RTAA Chiller & Controls
Centrifugal Owners & Operations Seminar
A one day Centrifugal Chiller Operation and Maintenance Seminar that presents an overview of the product, theory of opera-
tion and general maintenance guidelines. It is designed for operators and owners of Trane Centrifugal Chillers. Significant
time is allotted for questions and answers with Trane Service Engineers.
Fee: $400 for non- contract customers
FREE for Service Contract Customers
(Trane Service Clients please contact your
sales representative)
Includes:
-All Literature
-Full breakfast and lunch
New Jersey 8:00 AM-4:00 PM
March 5
A one day Rooftop & Self Contained Operation and Maintenance Seminar that presents an overview of the product, theory of operation and gen-
eral maintenance guidelines. It is designed for operators and owners of Trane DX Rooftop & Self Contained chillers. Significant time is allotted
for questions and answers with Trane Service Engineers.
Fee: $400 for non-contract customers
FREE for Service Contract Customers
(Trane Service Clients please
contact your sales representative)
Includes:
- All Literature
- Full breakfast and lunch
Ask us about
multiple student discounts!
New Jersey 8:00 AM– 4:00 PM
March 19
New York 8:00 AM-4:00 PM
February 11
Mission
Trane New York / New Jersey
To be the leader in our business
We will attain this leadership by:
Understanding our clients’ expectations and proactively striving to exceed them every time … with service excellence.
“Teaming within” such that our clients experience the full resources of our unique offerings … and find enduring value.
Employing quality, service-minded associates and training them to a technical proficiency while encouraging personal
and professional growth … with world class safety.
Adhering to the highest ethical standards while focusing on the long-term profitable growth of each client relationship.
Our Locations
www.tranenynj.com
New York City
Sales and Parts
45-18 Court Square
Long Island City, NY 11101
Phone: 718-269-3600
Fax: 718-269-3601
Long Island
Sales and Parts
245 Newtown Road, Suite 500
Plainview, NY 11803
Phone: 718-269-3506
Fax: 718-269-3758
Westchester
Sales and Parts
12 Skyline Drive
Hawthorne, NY 10532
Phone: 914-593-0303
Fax: 914-593-7222
New Jersey
Sales
19 Chapin Road
Pine Brook, NJ 07058
Phone: 718-269-3600
Fax: 718-269-3601
Pine Brook
Parts
26 Chapin Road
Pine Brook, NJ 07058
Phone: 800-55-TRANE
Fax: 973-883-5592
South Plainfield
Parts
107H Corporate Boulevard
South Plainfield, NJ 07080
Phone: 888-66-TRANE
Fax: 908-412-1331
Teterboro
Parts
800 Huyler Street
Teterboro, NJ 07608
Phone: 877-50-TRANE
Fax: 201-489-8429
