Scantime · 2015. 12. 18. · Scantime Engineering Ltd Prudhoe, Northumberland. NE42 6QD. England +44(0) 7974 005661 PLC / HMI & SCADA Process Control – Engineer Training – Consultancy

Scantime Engineering Ltd Engineering Solutions

Training, Process Control & Data Acquisition

��

�

�

�

��

Process Control & Data Acquisition Training Engineers to Industrial Standards

Programmable Logic Controllers (PLC)

Human Machine Interface (HMI)

Programming & Fault Finding

Omron – CPM / CJ / C200HS / C200HG / C1000 / CVM Mitsubishi – FX series / A2n / A3N / Q series Siemens – S7-200 Allen Bradley - Micrologix Omron CxProgrammer or Syswin Mitsubishi GxDeveloper or GXiec Siemens Step7 Microwin Allen Bradley RS Logix

Omron – NT20 / NT600/ NT620 / NS Terminals Mitsubishi – MX4 / E200/ E910/ E1000 Terminals / GOT MX4 SCADA Intellution Wonderware InTouch

Contact: David Simm Tel: 07974 005661 email: [email protected]

Scantime Engineering Ltd Prudhoe, Northumberland. NE42 6QD. England +44(0) 7974 005661

PLC / HMI & SCADA Process Control – Engineer Training – Consultancy

2

�� Maintenance and Development ............. 3

Course Manuals and CD ..................................................................................................... 5

Training Grants: .................................................................................................................. 5

Project Based Training........................................................................................................ 6

ONSITE Training................................................................................................................ 7

OFFSITE Training Centre .................................................................................................. 8

ONLINE Training Courses ................................................................................................. 9

OMRON – MITSUBISHI – SIEMENS – ALLEN BRADLEY PLC TRAINING.......... 10

Training can also be customized to suit your requirement. .............................................. 10

PLC Module1: Introduction to PLC’s....................................................................... 10

PLC Module2: Programming & Maintenance ........................................................ 11

PLC Module3: PLC Program Development Level1&2 ........................................ 13

HMI & SCADA TRAINING............................................................................................ 14

Module1: Introduction to HMI’s & Scada.................................................................... 14

Module2: HMI & Scada Programming ..................................................................... 15

Where we are .................................................................................................................... 16



3

��Maintenance and Development Training We provide Professional PLC Training to Individuals and Company Employees to ensure their

knowledge and skill level of PLC's & HMI equipment are maintained at a level to provide a more

efficient work force and production process. If you are new to PLC’s and Programming our

courses will teach you the basics and then teach you the subjects necessary for working on

Industrial PLC’s to professional standards.

EMPLOYED Ensure your knowledge and

skills of PLC's & HMI

equipment that control the

manufacturing processes

are kept up to date.

Maintaining your skill level

protects your future.

STAFF Increased skill levels of your work force

ensures that downtimes caused through

process failures are kept to a minimum,

resulting in increased productivity and

efficiency.

NEW CAREER BECOME PROACTIVE and take the first step

on the SKILL ladder.

Your prospect of

securing a new

career is

enhanced if you

know PLC Engineering. Skill levels and

knowledge are fundamental when companies

view potential candidates. Investing some time

now could prove rewarding when attending that

important interview.

IF YOU ARE NOT ON THE SKILL LADDER

TO SUCCESS, ATTEND A TRAINING

COURSE NOW!



4

All of our courses are based upon PLC troubleshooting techniques to Industrial and Electrical

Engineering Standards. The courses available provide trainees with the knowledge on how to

Program, use Software Development tools, Write control software, Maintain and Fault Diagnose

manufacturing problems through the use of a PLC, also the creation of controls on HMI

Terminals to control and monitor the manufacturing process.

Training is also provided on how to use and interact with PLC programs to ensure that the

Safety Integrity of the manufacturing process is not compromised. For company employees we

can customize courses specifically around your own manufacturing environment, this ensures

the trainee is learning that which is more relevant to their working environment.

The Courses are conducted with on screen Visual Presentations and hands on use with PLC

Training kits and the use of Laptops.

Conventional or Project based Training: Training can be given as a Conventional course or

can be Project based to suit your Company shop floor requirements. On the following pages

is a summary on some of the courses available.



5

��

Documentation: Each trainee receives Course Manuals, Portfolio and Training.

At the end of each course there is an informal test, based upon

the subjects taught during the course, we then provide each

trainee with a Course Certificate to show that they have fully

completed the course.

�� (UK Companies only) Up to 50% grant assistance is available on any of our courses through Business Link. For further details please contact us.



6

�� Project based Training provides the company with a quick return on their training investment. The company identifies a requirement that would benefit the manufacturing process and appoints the engineer(s) to be trained in its development. At the end of the course the engineers are fully trained and the project is ready to be installed and commissioned at a time to suit you. One such Project Training Course could be the modification of existing HMI Control Screens OR the construction of a Downtime System, which can be used to identify the main Loss areas of your manufacturing process. The information it provides can then be utilised to improve the manufacturing efficiency or as a precursor to an MES system. Project based training is an ideal way of ensuring your engineers are learning at a level more relevant to your manufacturing circumstances.

Benefits:

Your engineers are trained on a manufacturing process that you select.

Training is based upon the Hardware and Software that your engineers have to maintain.

Downtime can be reduced as engineers become more familiar with the control software.

So as not to disrupt the manufacturing process, all training is conducted in a training area away from the manufacturing area.

The course is more relevant to your manufacturing environment.

Training can be arranged to fit your schedule.

We will work with your company to determine your specific requirement. Should any special equipment be necessary then a fee may have to be charged, this would be discussed prior to the course preparation.



7

��

��

Economical:

• Custom designed if required.

• Save in transportation, hotels & meals.

• Employee travel time saved.

• Half-day training sessions.

Benefits:

• Train your key engineering staff economically.

• Your critical employees are available in case of emergencies.

• Customized courses can be provided that is more relevant to your manufacturing environment.

• Training can be arranged to fit your schedule.

• A complete, long-term curriculum can be provided.

We offer cost effective on-site training for any of our courses at your location, we will work with

your company to determine your specific requirement. Course fee cover the time to prepare,

travel, and provide training at your location. Should any special equipment be necessary then

a fee may have to be charged, this would be discussed prior to the course preparation.



8

��

��

Open to Company Engineers and Individuals who have no in house training facilities. Courses are available from 2-5days also 1 day refresher courses for those who have previously attended a course. We can also accommodate Day Training for individuals who wish to spread a 5day course over a time period to suit their circumstances, no financial commitment is required for course days not booked.

These courses are held throughout the year

Gateshead, Tyne & Wear. Also available at Hexham

and Alnwick Northumberland.

Held in modern facilities with computer terminals and overhead projection, they provide a quiet

and relaxing atmosphere. Each pair of trainees is equipped with a Test Rig that allows them to

test and debug the course exercises.

To ensure trainees receive adequate attention, the

number of places per course is limited, so it advisable to

book early. Dates for these courses are released every

month.

Throughout the day coffee and tea is provided along

with a buffet lunch.



9

��

��

Scantime Engineering are a leading provider of Engineer

Training on the internet. Our Online PLC Programming

courses are a cost effective and flexible training solution if

you want to start learning now. Online training can also be

taken as a precursor to taking a hand’s on training course

at a later date. The online courses are ideal for those

wishing to broaden their horizons, or for Students and

Engineers wishing to further a more profitable career in

Electrical and Electronic Engineering by enhancing their skill level.

No previous experience is required.

You will have your own personal tutor helping you via email with your course work and with any

questions that may arise. A certificate is awarded to all those who complete the course.

PLC Training is done at your own pace; there is no pressure to complete the coursework to suit

others on the same course. You decide which days and at what times are

best suited for you.

For further information or to purchase a course in PLC’s

Visit: www.scantime.co.uk

Credit card payments accepted with secure online payment.



10

�� !��"�� #��

��#��$��#��

��%��&�'��(��)��&��*�

PLC Module1: Introduction to PLC’s Training OnSite or Offsite Duration: 2day courses Ideal for Engineers with other PLC experience or people who need to have an awareness of PLC’s. Experience Required: NONE

PLC Course Prospectus What you will learn ...

• PLC Hardware & Software o PLC Support Tool (Omron CxProgrammer or Syswin – Mitsubishi GX Developer) o PLC background o Backplane and Modular PLC’s o Rack Assembly o Addressing structure o Wiring IO cards – NPN & PNP o A look at PLC Software Support tools o The CPU, EPROM & EEPROM o Monitoring working programs o Writing values into registers

• PLC Ladder Logic o Binary/Hex/BCD o Contacts & Coils. o A basic rung of ladder logic o Ladder Programming o Single shot pulse o The Latch o Adjusting Timers and Counters o Symbols and rung descriptions o Basic Ladder programming exercises o Data Handling o The use of PLS/MOV/INC/DEC in programs

• Standard Operating Practices (SOP) o Downloading and Uploading

• Troubleshooting o The most common problems



11

PLC Module2: Programming & Maintenance

PLC Programming, Maintenance & Fault Finding Training OnSite or Offsite Duration: 3 to 4.5day courses Ideal for Engineers with little or no PLC experience, and who are expected to work with PLC’s on a daily basis Experience Required: NONE

PLC Course Prospectus This course includes the topics on the previous page - INTRODUCTION TO PLC’s and is ideal for anyone wishing to learn about PLC Maintenance and Fault Finding techniques or PLC’s and Industrial Programming. The Course not only covers the theoretical side of PLC’s but also is includes Industrial Practices and Standard Operating Procedures when Fault Finding and undertaking Modifications to ensure safety integrity of the processes are maintained.

What additional topics you will learn ...

• Customized o This part of the course is based upon the programs you use on your production equipment o Learn how to Fault Find on your machines o Back and prevent disasters o Learn how parts of the machine operate in the program o Learn how to modify your programs safely o Add new features and operations to machine cycle.

• PLC Hardware and use of the Support Tool o Support Tool use o The use of Special IO o Using the PLC Software Support tool o PC to PLC Communications o Communicating via USB o Quickly comparing PLC program copies o Working efficiently with tool bars o On Line and Off Line Operation o Communicating with the PLC o How to find your way around PLC programs o Using the Support tool and PLC to reduce downtimes during process breakdowns. o Force Enabling & / Disabling safely

• PLC Ladder Logic o The PLC Scan o The PLC Scan and its effects on Registers and General IO o A look at Industrial Programming standards o First scan setup and Single scan signaling o Instruction types - MOV/CMP/ADD/SUB/SET/RST/PLS etc

Continued overleaf……………



12

Continued…………………

PLC Module2 PLC Maintenance & Fault Finding Level1&2

• PLC Ladder Logic …continued o Alarms and how to create them. o Start – Stop routines o Subroutines and Interlocks o Working with integers, binary, BCD, floating-point data memory areas. o Best Practice programming o Ladder programming exercises

• Standard Operating Practices (SOP) o File Management o Backing up your PLC programs o Online Editing and Safety

• Fault Finding o Fault Finding techniques o SAFETY while programming and fault finding of the Process, Plant & Personnel o When to use FORCING and its dangers o SET & UNSET

• Troubleshooting o Basic troubleshooting theory o Relating your PLC program to the real world o How to recover quickly from power problems o Actual troubleshooting exercises



13

PLC Module3: PLC Program Development Level1&2 Training OnSite or Offsite Duration: 4.5day courses Ideal for Engineers with little or no PLC experience, and who are expected to create working programs with PLC’s. Experience Required: PLC Maintenance or other PLC

• Industrial Standards o Program Structure o Safe Programming Techniques o Programming to IEC61131 standards

• Programming o Alarm Handling o Status Routines o Use of advanced Instructions o Safe Recovery from Power failures o Data Logging o Sequential process control o Interlocking for safety



14

"��+��##��#��

��,��"��-��+��

Training OnSite or Offsite Duration: 1 or 2day courses Experience Required: NONE

PLC Course Prospectus

What you will learn ...

• Hardware o Background to HMI’s and Scada o HMI and Scada in Industry o Differences between HMI and SCADA

• Programming o Object creation - Buttons, Sliders, Indicators, Data Links etc o Addressing to the PLC o Using the Programming Software o Screen Navigation o Creating dynamic screens o Basic Programming exercises

• Standard Operating Practices (SOP) o Uploading and Downloading HMI Programs

• Troubleshooting o The most common problems



15

��.: HMI & Scada Programming Training OnSite or Offsite Duration: 3 or 4.5day courses Experience Required: NONE

PLC Course Prospectus

What you will learn ...

• The Development Environment o Development Software o Toolbars and Work Area o Communication setup with the PLC o Setting up the IO o IO Naming conventions o Screen resolutions

• Programming o Screen layout standards o Navigation methods o Object creation - Buttons, Sliders, Indicators, Data Links etc o Scripting objects (special HMI’s only) o Trend Screens o Creating and Generating Reports (special HMI’s only) o Writing values into PLC Registers o Creating Thumbwheels with PLC Logic o Creating Alarm screens and Banner areas o Setting Alarm Levels HiHi – Hi – Lo – LoLo o Creating drop down menus (special HMI’s only) o Creating dynamic screens o Recipe storage and retrieval o Remote access of HMI via Ethernet (special HMI’s only) o Generating automatic email (E910 series only) o Programming exercises

• Standard Operating Practices (SOP) o Uploading and Downloading HMI Programs o Backing up o Setting up communications for Downloading o File management

• Troubleshooting o The most common problems o Actual troubleshooting exercise



16

/0��1�� For further information please contact us.

Scantime Engineering Ltd Engineering Solutions Process Control & Data Acquisition Head Office Prudhoe. Northumberland NE42 6QD Tel: 07974 005661 / 01661 830114 email:[email protected] www.scantime.co.uk

TRAINING CENTRE DBH Centre Aidan House Tynegate Office Precinct Sunderland Road Gateshead Tyne & Wear NE8 3HU

Documents

Scantime · 2015. 12. 18. · Scantime Engineering Ltd Prudhoe, Northumberland. NE42 6QD. England +44(0) 7974 005661 PLC / HMI & SCADA Process Control – Engineer Training – Consultancy