2014 Software Global Client Conference - …iom.invensys.com/EN/SoftwareGCC14Presentations/Technical Support...Cricondenbar Cricondentherm. 2014 Software Global Client Conference

2014 Software Global Client Conference

SS TSS-01B

New Features

in PRO/II

Part B

Highlights of updates from

PRO/II 9.2 and 9.3

Naomi Hua


Mobile App: Please take a moment…

Check into Session by:

●Select Detailed Schedule

●Select the specific session

●Click on “Check in”

Take Session Survey by:

●Select Detailed Schedule

●Select the specific session

●Scroll Down to “Survey” and Provide Feedback

Performance

Improvements


Sequence Improvements

PRO/II 9.2 and previous versions PRO/II 9.3


Sequence Improvements ●Sequence tree with blocks, loops,

controllers clearly marked

●Collapse/Expand to follow easier

long sequences

●Click a unit and unit’s DEW

displays

●Search functionality

●Move units using drag and drop

●Move entire blocks of units

●Enable/Disable units/entire blocks

with a check mark



●Logic crosses easily identified.

● In this example user can double

click on CON and select to return

to COM to remove the cross





●When a new unit is added into a

User Sequence, the new unit is

located following the unit

supplying the input stream and

the new unit is highlighted for

easy identification


Enable/Disable Subflowsheets ●Can enable/disable entire subflowsheets

●Ensure streams entering a block are well defined (Copy Paste

Special Total Stream Data)


Case Study Improvements ● Support for matrix case study

● If cycle fails it is shown with an * on

the cycle number.


Tray Properties Available through COM

●Find all the details

on tray properties

without the need

to create

pseudostreams or

re-flashing internal

streams to retrieve

data


Copy/Paste to/from Excel for UAS Data

● From PRO/II UAS UOP Excel:

● Click on the corner of the grid to select

the entire grid

● Ctrl-C to copy, then paste into Excel

● From Excel PRO/II UAS UOP:

● Select data range only in Excel

● Copy

● Locate cursor at top left cell and paste


Phase Envelope Updates

●Added support for additional EOS to the list of acceptable method

sets such as PPR78, BWR

●Color code phase envelope

lines 0

500

1000

1500

2000

2500

-400 -200 0 200 400 600

Pre

ssu

re,

psia

Temperature, F

Phase Envelope Curve for stream '1_1'(On Dry Basis), Description :

Full Envelope (DewPoint Curve)

Full Envelope (BubblePoint Curve)

Full Envelope (WaterDew Point Curve)

Critical Point

Cricondenbar

Cricondentherm


Heating Curve Updates

● Evaluate HXs at 3 pressures: inlet, outlet,

and halfway in between

● Provide option to evaluate both sides of

the HX at once

● Allow attributes within a Heat Curve (such

as T&P Ranges) to be set via the "Define"

function

● Heating curve thermo selection will match

the method selected for the HXs being

evaluated


Heat Curve Updates ● Standard heat curve generation for HXs at inlet, outlet and mid pressure isobars


Tools Spreadsheets Updates

●Converted to *.xlsm file formats

●Reports generate faster

●Heating Curves Spreadsheet:

● Transfer all H-Curve properties to spreadsheet tools

● All Component Related Properties to be Reported when requested

● Heat curves spreadsheet in Output Units


Tools Spreadsheet Heat Curves

●Multiple heating curve units available for selection

●Multiple streams/units available per heating curve unit for selection


●Additionally requested properties transferred

Tools Spreadsheet Heat Curves

Unit Operation

Improvements


Multiple Molecular Weight Compressor Curves






CAPE-OPEN Unit Operations

●Refinery Reactors

●First company to provide

petroleum fraction

properties passed

through CAPE-OPEN


Feed Flash Options per Feed Tray

●Multiple feed flash

options for each feed

to the column:

● On Tray: Total feed

enters onto the feed

tray

● Separate: Vapor goes

to tray above and

liquid to feed tray


New Koch Glitsch Tower Version

●New Version: KG Tower 5.1


Column Hydraulics: KG Packing Updates ●New packing correlations received from KochGlistch and

incorporated into PRO/II


Calculate and Report Ideal Cp/Cv

●Not included in report by default

●Request via Stream Property Table


Depressuring Unit Operation Updates 1. New valve mode – Orifice. Will detect if

flow is sonic or subsonic automatically

and use appropriate equations.

2. Support for dense phase calculations.

Will detect if supercritical conditions.


Depressuring Unit Operation Updates 3. Re-order product streams

4. Create pseudo-streams corresponding to

instantaneous vent rates at specific times

5. Indicate whether flow through valve is

critical or sub-critical


Depressuring Unit Operation Updates

6. Support for density and thickness in

vessel geometry

7. Report temperature downstream the

relief valve



8. Valve policy & user control of flow rate

and depressuring time

9. Provide an external heat input [Qexr –

UA(Text-Twall)] calculation for blowdown

10.Valve policy for User model & Orifice

model for area

11.Supply wall and liquid temperature profiles

12.Require final pressure in depressuring unit

to be exactly the specified final pressure



13.Dynamic wetted area

14.Put the maximum pressure on the

VAT so it can be used as a control

parameter

15.Null out product streams when the

step size is increased so that

fewer streams are produced

16.Liquid relief in depressuring unit

17.Document Depressurization unit


Excel Calculator Unit Operation

● Same icon as the normal calculator

but choose ‘Use Excel Procedure’

● Define parameters, results,

constants, etc., as always

● Similar to Excel Unit operation but

more powerful

● Similar to Calculator block but no

FORTRAN coding needed for

procedure section

● Select Excel File (template available)

and edit it


Use Excel to calculate anything you need


Results can come just from Excel operations


Component info is available

44 Confidential Property of Schneider Electric

Related Support, Services, Training & Expo Demos

> 1-800-SIMSCI-1 (1-800-746-7241)

> [email protected]

Support

Training

> SimSci Training Catalog:

http://iomtraining.invensys.com/simsci/porta

l/catalog.cfm?calendarID=92#

> Filter above link by Type = Job Aids for

mini-training videos (5-10 minutes in length)

> SimSci Blog:

http://simulationots.blogspot.com/

> SimSci Experience:

http://experience.simsci.com/

Services

Expo Demos

> SS TSS 03: Simulation Thermodynamics

(Thursday, Oct 2nd 9:30 AM – 11:15 AM)

> SS TSS 04: DYNSIM 5.2 New Features.

(Thursday, Oct 2nd 1:30 PM – 4:00 PM)

45 ©2014 Schneider Electric. All Rights Reserved.

All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies or their respective owners.

Documents

2014 Software Global Client Conference - …iom.invensys.com/EN/SoftwareGCC14Presentations/Technical Support...Cricondenbar Cricondentherm. 2014 Software Global Client Conference