2014 outdoor catalog

OUTDOOR CATALOG

Edition 1

ARIA MINI 12

CALUMET 14

CEFISO 18

CHILONE 24

CICLOPE 30

CUNEO 36

EFFETTO 38

EPULO 46

ERACLEA 52

FALANGE 54

GIASOLE 58

HILA 62

IPPOLITO 66

LINEALED DRIVE-OVER 68

MINISPOT 70

MOLLA 72

NAIADE DRIVE-OVER 74

NAIADE DOWNLIGHT 80

NIKI 86

NUDA 90

ORCAMO WALK-OVER 96

ORCAMO DOWNLIGHT 100

PANTAREI 104

REEDS 112

SPIKE 116

TOLOMEO XXL 120

TYPOLOGY 2

FAMILIES 4

OVERVIEW 8

GENERAL TERMINOLOGY 126

CODE INDEX 128

Index

ARTEMIDE OUTDOOR COLLECTION


CHILONE P.27

CICLOPE P.33

CUNEO P.37

ERACLEA P.53

GIASOLE P.61

HILA P.65

IPPOLITO P.67

NUDA P.92

REEDS P.113

TOLOMEO XXL P.123

LINEALED P.69

NAIADE P.77

SPIKE P.119

CEFISO P.23

EPULO P.48

FALANGE P.56

MINISPOT P.71

ORCAMO P.99

Walk-over Recessed

Drive-over Recessed Linear Floor bollard Spotlight

2

ARTEMIDE OUTDOOR COLLECTIONTypology

Typology

EFFETTO P.41

MOLLA P.73

ARIA MINI P.13

CALUMET P.15

CHILONE P.27

CICLOPE P.33

CUNEO P.37

GIASOLE P.60

HILA P.65

NIKI P.87

PANTAREI P.108

CALUMET P.17

GIASOLE P.60

NIKI P.87

PANTAREI P.108

NAIADE P.83

ORCAMO P.102

CHILONE P.29

Pole Wall mounted Wall effect Ceiling mountedDownlight Recessed

3

ARTEMIDE OUTDOOR COLLECTIONTypology

Aria mini p.12

ARIA MINI P.13

Calumet p.14

CALUMET WALL P.15

CALUMET CEILING P.17

Cefiso p.18

CEFISO 14 WALL/CEILING/FLOOR P.23

CEFISO 20 WALL/CEILING/FLOOR P.23

Chilone p.24

CHILONE WALL P.27

CHILONE UP FLOOR P.27

CHILONE 45 FLOOR P.27

CHILONE 90 FLOOR P.27

CHILONE POLE P.29

Ciclope p.30

CICLOPE WALL P.33

CICLOPE 50 UNILATERAL FLOOR P.33

CICLOPE 50 BILATERAL FLOOR P.33

CICLOPE 90 UNILATERAL FLOOR P.35

CICLOPE 90 BILATERAL FLOOR P.35

Cuneo p.36

CUNEO WALL/FLOOR P.37

Effetto p.38

EFFETTO 1 NARROW BEAM WALL P.41

EFFETTO 1 LARGE BEAM WALL P.41

EFFETTO 2 NARROW BEAMS WALL P.41

EFFETTO 1 NARROW /1 LARGE BEAM WALL P.41

EFFETTO 2 LARGE BEAMS WALL P.43

EFFETTO 4 NARROW BEAMS WALL P.43

4

ARTEMIDE OUTDOOR COLLECTIONFamilies

Families

EFFETTO 4 LARGE BEAMS WALL P.43

EFFETTO ROUND 1 NARROW BEAM WALL P.44

EFFETTO ROUND 1 LARGE BEAM WALL P.44

EFFETTO ROUND 2 NARROW BEAMS WALL P.44

EFFETTO ROUND 1 NARR. / 1 LARGE BEAM WALL P.44

EFFETTO ROUND 2 LARGE BEAMS WALL P.45

EFFETTO ROUND 4 NARROW BEAMS WALL P.45

EFFETTO ROUND 4 LARGE BEAMS WALL P.45

Epulo p.46

EPULO 13 WALL/CEILING/FLOOR P.48

EPULO 18 WALL/CEILING/FLOOR P.49

Eraclea p.52

ERACLEA FLOOR P.53

Falange p.54

FALANGE 9 WALL/CEILING/FLOOR P.56

FALANGE 18 WALL/CEILING/FLOOR P.57

Giasole p.58

GIASOLE WALL/CEILING P.60

GIASOLE UNILATERAL FLOOR P.61

Hila p.62

HILA WALL P.65

HILA FLOOR P.65

Ippolito p.66

IPPOLITO 45 FLOOR P.67

IPPOLITO 90 FLOOR P.67

5


LineaLed p.68

LINEALED DRIVE-OVER FLOOR P.69

Minispot p.70

MINISPOT WALL/FLOOR P.71

Molla p.72

MOLLA WALL P.73

Naiade drive-over p.74

NAIADE 55 DRIVE-OVER ROUND FLOOR P.77

NAIADE 55 DRIVE-OVER SQUARE FLOOR P.77





Naiade downlight p.80

NAIADE 55 DOWNLIGHT ROUND CEILING P.83

NAIADE 55 DOWNLIGHT SQUARE CEILING P.83





Niki p.86

NIKI WALL/CEILING P.87

Nuda p.90

NUDA 50 UNILATERAL FLOOR P.92

NUDA 50 BILATERAL FLOOR P.92

NUDA 100 UNILATERAL FLOOR P.93

NUDA 100 BILATERAL FLOOR P.93

6


Orcamo walk-over p.96

ORCAMO 150 WALK-OVER ROUND FLOOR P.99

ORCAMO 150 WALK-OVER SQUARE FLOOR P.99

Orcamo downlight p.100

ORCAMO 150 DOWNLIGHT ROUND CEILING P.102

ORCAMO 150 DOWNLIGHT SQUARE CEILING P.103

Pantarei p.104

PANTAREI 190 WALL/CEILING P.107



Reeds p.112

REEDS P.113

REEDS IP67 P.113

REEDS IP67 TRIPLE P.113

REEDS IP68 P.115

REEDS IP68 TRIPLE P.115

Spike p.116

SPIKE WALL/CEILING/FLOOR P.119

Tolomeo XXL p.120

TOLOMEO XXL WITH BASE FLOOR P.123

TOLOMEO XXL WITH FIXED SUPPORT FLOOR P.123

7


Overview

Artemide, protagonist of the outdoor residential segment

Artemide stands for excellence in Design, combined

with continuous technological advancement : this

clear and consistent positioning has made the

Company one of the world leaders in indoor lighting.

Today the unique and distinctive competences of

the Artemide Group and its strong innovative skills

give birth to the first Artemide Outdoor Catalog.

A complete as sortment of products for the outdoor

light design projects, based on years of research and

development. Great attention was devoted to the

usage of innovative and eco-friendly materials. Most

importantly, the Company has made a clear choice :

to use only the most updated and efficient light

sources, in order to minimize energy consumptions,

CO2 emissions and maintenance costs. Therefore the

Artemide Outdoor Catalog presents an extensive

usage of the lastest generation LED sources, optical

systems, highly performing heat dissipation devices,

and advanced electronic components. Moreover

the products present a range of two different

color temperatures, and are combined with light

control technologies that guarantee not only cost

and emissions reduction, but also impactful and

fascinating effects, so important for outdoor light

design projects.

The key point of the new Artemide Outdoor Catalog

is the rich and co mplete offer, with solutions for

all market needs and for all architects and lighting

designers requests. The product assortment has

been developed thanks to the production facilities

of Pregnana Milanese, Megalit and NordLight.

It includes walk-over and drive-over items, LED

profiles, recessed, effect and wall light fixtures,

downlights and spotlights, bollards and poles. The

proposed solutions will fully meet the requi rements

of light design projects for hotels, shops, offices

and public spaces. For such projects, facades, open

air spaces and gardens are increa singly important,

since they help create unique en vironments, ensure

plea sant and harmonious atmospheres, and enhance

the public image of companies and communities.

Artemide Group is a global leader in upscale

residen tial and professional lighting. Founded in

1960 by Ernesto Gismondi, Artemide Group is

based in Pregnana Milanese. It operates through

24 controlled and related companies and a distribution

network of almost 60 single-brand showrooms in

cities all around the world. Artemide products are

distributed in 83 different countries. With 6 plants

in Italy, France, Hungary, Canada and United States,

2 glassworks and 2 Research and Development

centers in Italy and France, the Artemide Group

averages 700 employees, among which 59 in the

R&D field, which confirms the essential role that

innovation plays for the Group’s success.

Service

Artemide develops lighting solutions that integrate

architectural and living spaces, always with a keen eye

on sustainability, sharing expertise and knowledge

with architects and lighting planners.

Artemide is sensitive not only to the needs of

human beings, but also to the environment, offering

a new service aimed at energy saving and to help in

reducing costs.

With its 55 Lighting Consultancy Centres worldwide,

Artemide offers customers a complete service to

support lighting engineering plans, beginning

a constant dialogue with its partners.

2D, 3D, IES are available upon request, together with

all the technical information necessary to implement

your own independent lighting engineering project.

Our technical team is available to help you in your

lighting projects.

8


Overview

Overview

Innovation and sustainability

Artemide’s research activity is constantly committed to developing

and adopting lighting systems that pursue the objective of maximum

energy efficiency. All project choices focus on a sole objective:

to improve people’s quality of life and their relationship with the

environment. In the sphere of a policy of the reduction of energy

consumption and being ahead of the regulatory requirements,

there are four areas of action into which Artemide’s commitment

is specifically translated:

Eco-Effectiveness

Maximum attention is devoted to design and production process:

responsible use of resources, meticulous choice of processes and

technologies with a view to achieving an energy balance.

Long term

Designing for the long term through careful planning of the entire

life cycle of the product, promoting internal technical training

using the experience accrued in the research into sustainability

(LCA, analysis of technologies, of processes, etc.) developed with

university research centres.

Responsible Consumption

To spread culture and offer instruments for a suitable choice and

a rational use of light, judging it in terms of energy saving and

affordability.

Quality

Quality is a fundamental choice for a more lasting relationship

with the product and as a prerequisite in the search for authentic environmental innovation.

Manufacturing

The care for sustainability of Artemide – a Company certified ISO

9001:2008, ISO 17025 and WMT – is ensured both by its French

plant Megalit, accredited with ISO 14001 and implementing the

Carbon Footprint, and by its focus on product lifecycle (LCA),

i.e. design, choice of raw materials, processing to minimize

transportation, and down to assembly, packaging, and disposal.

The improvement of the light fixture efficiency during use involves

energy-saving, reliability and lastingness of the implemented

technical solutions with a consequent reduction of CO2 emissions.

All Artemide light fixtures comply with European Directives and

Standards and bear CE mark.

LCA (Life Cycle Assessment)

LCA is a strategic approach used to assess the

potential environment impact that a product has

during all the stages of its life cycle: selection of

raw materials, processing, transport and assembly,

packaging, distribution, use phase, disposal and

recycling.

9


Overview

LED technology

With a wide experience in using LEDs for indoor light fixtures, Artemide uses LED

technological innovation also for outdoor light fixtures. Aesthetic quality and

design, distinguishing all Artemide products, combine with values such as light

distribution control, light fixture efficiency, reduced energy consumption and

operation costs. LEDs are suitable for diffe rent outdoor applications, from scenic

lighting to enhan ce facades and architectural elements to functional lighting of

paths, urban areas, garden or parks.

Economic and environmental advantages deriving from using LEDs are :

• high light efficiency

• low consumption

• reduced CO2 emissions

• very limited use of raw material

• use of non-toxic and non-harmful materials

• reduced size and weight which ensures great savings for transport and logistics

• use of components that can be easily disassembled and recycled

• use in safety low voltage

• very long operation time

• short maintenance cycles

• excellent shock and vibration resistance

Artemide’s expertise in the field of LED lighting fixtures focuses on some

points which are absolutely necessary for a correct and long-lasting use of this

technology:

• The accurate selection of latest generation LEDs

• The design of heat dissipation systems

• The use of advanced electronic components

• The development of excellent optical systems

Heat dissipation

LEDs on printed circuit

LEDs and lenses

10


Overview

Outdoor materials and finishes

The Outdoor fixture design process includes accurate material

and technology selection so that fixtures meet all the technical,

aesthetic and functional requirements. All Artemide products have

undergone the following tests:

• Saline fog tests to evaluate corrosion resistance;

• UV radiation exposure tests to evaluate their behavior when

exposed to sunlight;

• IP tests to evaluate the fixture waterproofing;

• IK tests to evaluate shock resistance;

• Load tests for walk-over and drive-over built-in fixtures.

The painting process is very important. The surface treatment

of an outdoor lighting fixture exposed to extreme atmospheric

agents and diverse weather conditions must ensure a suitable

level of protection against the aggressive action of acid rains,

saline environments, humidity and UV radiations. With its own

internal painting plant, the surface treatment of the Artemide

outdoor range is in full compliance with RoHS RAEE standards and

qualitative conditions are constantly observed.

The painting plant cycle is provided with a pre-treatment tunnel

that includes 6 stages of iron phosphate treatment and a rinse

process together with a nanotechnological spray passivation

process, consisting in the deposit of diamond structured molecules.

This is useful to prepare the fixture for the application of the anti-

corrosion epoxy powder primer through an electrostatic application

system with dedicated spray cabins. Once the polymerization has

been completed through the dry oven, the powder paint finish with

a polyester- free base is applied. This application is carried out after

the dry oven and reticulation at 190°C (374°F).

Fields of application

The Artemide Outdoor collection is suitable for different

applications:

• scenic lighting for enhancing facades and architectural elements;

• functional lighting of paths, bikeways, parks;

• social space lighting for urban landscapes, squares and gathering

places;

• environmental lighting, respecting the nature of parks and

gardens;

• indoor lighting in places where water requires fixtures with high

IP value, such as wellness centres and swimming pools.

11


Aria minidesign by Massimo Sacconi

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

• WALL INSTALLATION

• AVAILABLE IN 2 FINISHES : WHITE OR GREY PAINTED

• BODY IN INJECTION MOLDED ALUMINUM

• FRAME IN ALUMINUM

• METALIZED PROLYCARBONATE REFLECTOR

• PROTECTION SCREEN IN TEMPERED GLASS, 1/8”(3MM)-THICK

• WHITE MONOCHROMATIC LEDS

• SILICONE GASKET

• REMOTE DRIVER REQUIRED (SOLD SEPARATELY)

WALL

12

ARIA MINI 2 13/16” x 3 1/8” (7,2 cm x 8 cm) ±2mm

1 15/16”4,8 cm

3 15/16”10 cm

code lamping power consumption lumens CCT CRI finish

Aria mini

NL31013VTK002UL 1 LED 4W 252lm 3000K 80 white

NL31013VTK006UL 1 LED 4W 252lm 3000K 80 grey

For complete fixture, please order body(ies) + corresponding driver(s)

Spot

Remote driver

NLA010005 2 - 4 lights

NLA010006 1 light

IP65

Aria mini WALL

13

LIGHTING SYSTEM WITH SINGLE OR DOUBLE EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

LENSES OPTIMIZE EMITTANCE AND DETERMINE BEAM SPREAD.

CALUMET WALL

• AVAILABLE IN 2 SIZES: Ø 3 1/8” (8 CM)

OR Ø 5 1/8” (13 CM)

• SINGLE OR DOUBLE EMISSION

• AVAILABLE IN 2 FINISHES: GREY WHITE (RAL9002)

PAINTED OR ANTHRACITE GREY

• CYLINDRICAL BODY IN EN AW-6060 ALUMINUM

• OPTICAL LIGHTING BODY IN EN AW-6060 ALUMINUM

• LED AND COLLIMATOR LENSES WHICH SWING BY MEANS

OF AN ALUMINUM BRACKET

• DIFFUSER IN REINFORCED GLASS

• WALL FIXING BRACKET IN BENT STEEL

• WATER TIGHT SILICONE GASKETS

• ELECTRONIC DRIVER INTEGRATED IN THE BODY

• PMMA LENSES WITH NARROW BEAM (8.5° AND 9°)

• WHITE MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR

TEMPERATURES:

· WARM=3000K / NEUTRAL=4000K

• ALL FIXING DOWELS AND SCREWS USED OUTSIDE

THE FIXTURE ARE IN AISI 304 STAINLESS STEEL

• THE COMPONENTS IN DIE-CAST ALUMINUM AND

THE STEEL BRACKET FOR WALL FIXING ARE PAINTED

BY MEANS OF 3-STAGE OUTDOOR TREATMENT:

NANOTECHNOLOGIES, ANTIOXIDANT PRIMER,

POLYESTER PAINT

Calumetdesign by Ernesto Gismondi

WALL

14

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

CALUMET 8 WALL

ø 3 1/8”ø 8 cm

4 9/16”11,6 cm

4 7/8”12,4 cm

9 7/8”25 cm

code lamping power consumption lumens CCT CRI beam finish

Single emission

T41911NW08 3 LED 4W 288lm 3000K 85 8.5° grey white

T41911NW18 3 LED 4W 288lm 3000K 85 8.5° anth. grey

T41911NN08 3 LED 4W 288lm 4000K 70 8.5° grey white

T41911NN18 3 LED 4W 288lm 4000K 70 8.5° anth. grey

Electronic driver integrated

Spot

Double emission

T41922NW08 6 LED 7.5W 576lm 3000K 85 2x8.5° grey white

T41922NW18 6 LED 7.5W 576lm 3000K 85 2x8.5° anth. grey

T41922NN08 6 LED 7.5W 576lm 4000K 70 2x8.5° grey white

T41922NN18 6 LED 7.5W 576lm 4000K 70 2x8.5° anth. grey


Double emissionSpot

IP65

CALUMET 13 WALL

6 13/16”17,3 cm

4 9/16”11,6 cm

ø 5 1/8”ø 13 cm

13 3/4”35 cm

code lamping power c onsumption lumens CCT CRI beam finish

Single emission

T41941NW08 4 LED 7.5W 388lm 3000K 85 9° grey white

T41941NW18 4 LED 7.5W 388lm 3000K 85 9° anth. grey

T41941NN08 4 LED 7.5W 388lm 4000K 70 9° grey white

T41941NN18 4 LED 7.5W 388lm 4000K 70 9° anth. grey


Spot

Double emission

T41952NW08 8 LED 15W 776lm 3000K 85 2x9° grey white

T41952NW18 8 LED 15W 776lm 3000K 85 2x9° anth. grey

T41952NN08 8 LED 15W 776lm 4000K 70 2x9° grey white

T41952NN18 8 LED 15W 776lm 4000K 70 2x9° anth. grey


Double emissionSpot

IP65

Calumet WALL

15

CALUMET CEILING

• AVAILABLE IN 2 SIZES: Ø 3 1/8” (8 CM)

OR Ø 5 1/8” (13 CM)



• CYLINDRICAL BODY IN EN AW-6060 ALUMINUM

• OPTICAL LIGHTING BODY IN EN AW-6060 ALUMINUM

• LED AND COLLIMATOR LENSES WHICH SWING BY MEANS

OF AN ALUMINUM BRACKET

• DIFFUSER IN REINFORCED GLASS

• WATER TIGHT SILICONE GASKETS

• ELECTRONIC DRIVER INTEGRATED IN THE BODY

• PMMA LENSES WITH WIDE BEAM (24° AND 32°)


TEMPERATURES:


• ALL FIXING DOWELS AND SCREWS USED OUTSIDE

THE FIXTURE ARE IN AISI 304 STAINLESS STEEL

• DIE-CAST ALUMINUM COMPONENTS ARE PAINTED WITH

3-STAGE OUTDOOR TREATMENT: NANOTECHNOLOGIES,

ANTIOXIDANT PRIMER, POLYESTER PAINT

CEILING

16


CALUMET 8 CEILING

ø 3 1/8”ø 8 cm

7”17,8 cm

4 9/16”11,6 cm


T41931LW08 3 LED 4W 288lm 3000K 85 24° grey white

T41931LW18 3 LED 4W 288lm 3000K 85 24° anth. grey

T41931LN08 3 LED 4W 288lm 4000K 70 24° grey white

T41931LN18 3 LED 4W 288lm 4000K 70 24° anth. grey


Flood

IP65

CALUMET 13 CEILING

9”22,8 cm

ø 5 1/8”ø 13 cm


T41961LW08 4 LED 7.5W 388lm 3000K 80 32° grey white

T41961LW18 4 LED 7.5W 388lm 3000K 80 32° anth. grey

T41961LN08 4 LED 7.5W 388lm 4000K 75 32° grey white

T41961LN18 4 LED 7.5W 388lm 4000K 75 32° anth. grey


Flood

IP65

Calumet CEILING

17

Cefisodesign by Alessandro Pedretti (Studio Rota & Partners)

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

• FLOOR, WALL AND SOFFIT/CEILING INSTALLATION

• AVAILABLE IN 2 SIZES : CEFISO 14, CEFISO 20

• AVAILABLE IN 2 FINISHES : GREY WHITE (RAL9002)


• COMPOSED BY ADJUSTABLE LIGHTING UNIT AND

TERMINAL BOARD. ROTATION ON THE BASE +/-180°,

BODY TILTING +/-90° BY MEANS OF A GRADUATED

METAL RING ALLOWING AN ACCURATE ADJUSTMENT.

POSITIONING IS MAINTAINED BY MEANS OF LOCKING

DOWELS

• BODY AND TERMINAL BOARD IN EN AB44100 ALUMINUM,

SILICONE GASKETS

• ELECTRONIC DRIVER INTEGRATED IN BODY

• SILKSCREENED TEMPERED GLASS SILICONED FLUSH WITH

THE BODY TO AVOID BACKWATER

• GLASS THICKNESS OF 0.2” (5MM) FOR CEFISO 14 AND

0.3” (8MM) FOR CEFISO 20

• PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS:

SPOT, FLOOD AND WALL WASHER


TEMPERATURES :


• SCREWS IN AISI 316 STAINLESS STEEL

• PAINTED DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR

TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT

PRIMER, POLYESTER PAINT

WALL / CEILING / FLOOR

18


Cefiso WALL / CEILING / FLOOR

19

Service Centre of University Students, Trento (Italy)Project: Studio Palerm and Tabares de Nava s.L. Arquitectos + CLA SdS Engeneering, ing Luca Masini20


Spot optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

10° optic

Flood optic

Wide luminous flow suitable for lighting of large areas

34° optic

Wall Washer optic

Elliptical distribution of the luminous flow suitable for wall washer effect

7° x 48° optic


21



CEFISO 14 5 5/8”

13,6 cm

1 5/8“4,2 cm

12 5/16”31,3 cm


Spot beam

T418010W08 9 LED 22W 959lm 3000K 80 10° grey white

T418010W18 9 LED 22W 959lm 3000K 80 10° anth. grey

T418010N08 9 LED 22W 1053lm 4000K 75 10° grey white

T418010N18 9 LED 22W 1053lm 4000K 75 10° anth. grey


Spot

Flood beam






Flood

Elliptical wall washer beam

T4180ELW08 9 LED 22W 830lm 3000K 80 7°x48° grey white

T4180ELW18 9 LED 22W 830lm 3000K 80 7°x48° anth. grey

T4180ELN08 9 LED 22W 950lm 4000K 75 7°x48° grey white

T4180ELN18 9 LED 22W 950lm 4000K 75 7°x48° anth. grey


Elliptical wall washer

IP65 IK10

CEFISO 20 7 11/16”19,5 cm

2 3/8”6,1 cm

16 7/8”43 cm


Spot beam






Spot

Flood beam






Flood








IP65 IK10


23

Chilonedesign by Ernesto Gismondi

CHILONE WALL

• CAN BE INSTALLED WITH THE LIGHT DIRECTED EITHER

DOWNWARDS OR UPWARDS


PAINTED OR RUST

• LAMP UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV RESISTANT DIFFUSER IN SHOCK RESISTANT

POLYCARBONATE WITH SATIN FINISH

• LAMP SUPPORT IN EXTRUDED EN-AW-6060 ALUMINUM

• WALL SUPPORT IN STEEL INCLUDED

• PAINTING IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR



• AISI 316 STAINLESS STEEL SCREWS AND SILICONE

SEAL GASKET


• PROVIDED WITH IP67 CABLE AND CONNECTOR FOR

THE MAIN CONNECTIONS

CHILONE FLOOR

• AVAILABLE WITH DOWNWARD EMISSION IN

17 11/16” (45 CM) AND 35 7/16” (90 CM) OR

WITH UPWARD EMISSION


PAINTED OR RUST




• SUPPORT POLE IN EXTRUDED EN-AW-6060 ALUMINUM,

CHROMATE TREATED AND PAINTED

• MOUNTING PLATE IN FOLDED, WELDED AND PAINTED

STEEL, WITH HOLES FOR GROUND FIXING BY MEANS OF

LOCK BOLTS OR DOWELS; INCLUDED




• AISI 316 STAINLESS STEEL SCREWS AND SILICONE SEAL

GASKET




WALL / FLOOR

SERIES OF LIGHT FIXTURES WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

Chilone wall

24

CHILONE POLE

• AVAILABLE WITH DOWNWARD EMISSION IN

98 7/16” (250 CM)


PAINTED OR RUST




• IN-GROUND SUPPORT POLE IN EXTRUDED

EN-AW-6060 ALUMINUM INCLUDED. IT MUST BE

INSTALLED BY MEANS OF A PROPER FOUNDATION PLINTH





SEAL GASKET




Chilone 90

Chilone pole

Chilone up Chilone 45

25

26


CHILONE WALL

17 1/8”43,5 cm

6 5/8” 16,8 cm

10”25,5 cm

1 7/8”4,8 cm

4 7/16”11,2 cm

back plate


T082408 6 LED 16W 515lm 3000K 80 grey white

T082418 6 LED 16W 515lm 3000K 80 rust

Electronic driver integratedSymm.

IP65

Tested in accordance with IES LM-79-08

CHILONE 45 FLOOR

Chilone 45 floor

17 11/16”45 cm

6 7/8”17,5 cm

6 5/8”16,8 cm



T082218 6 LED 8W 194lm 3000K 80 rust

Electronic driver integratedAsymm.

IP65


CHILONE UP FLOOR

Chilone up floor

19 5/16”49 cm

6 5/16”16 cm

6 5/8”16,8 cm



T082318 6 LED 16W 515lm 3000K 80 rust


IP65


CHILONE 90

Chilone 90 floor

35 7/16”90 cm

6 7/8”17,5 cm

6 5/8”16,8 cm



T082118 6 LED 8W 194lm 3000K 80 rust


IP65


Chilone WALL / FLOOR

27

Ranco, Varese (Italy)28


CHILONE POLE

Chilone pole

98 7/16”250 cm

6 5/8”16,8 cm

8 1/4”21 cm



T082018 6 LED 16W 310lm 3000K 80 rust


IP65


Chilone WALL / FLOOR

29

Ciclopedesign by Alessandro Pedretti (Studio Rota & Partners)

LIGHTING SYSTEM WITH DIFFUSED UNILATERAL OR BILATERAL EMISSION AND HIGH-PERFORMANCE LED LIGHT

SOURCES. LIGHT EMISSION IS OBTAINED BY THE COMBINATION OF SIX MONOCHROMATIC LED LIGHT SOURCES,

A REFLECTOR AND OPALINE DIFFUSER.

CICLOPE WALL

• AVAILABLE IN 2 FINISHES: GREY WHITE RAL9002)

PAINTED OR RUST

• BOX IN EXTRUDED EN AW-6060 ALUMINUM

• LIGHTING UNIT COMPOSED BY :

· FRAME IN REINFORCED POLYMER

· DIFFUSER IN LIGHT-DIFFUSING POLYCARBONATE

· PLATE IN PICKLED, MACHINED AND GALVANIZED STEEL

· WATERTIGHT GASKET IN SILICONE RUBBER

· LED CIRCUIT

· ELECTRONIC DRIVER

· REFLECTOR IN PAINTED SPUN ALUMINUM

• THE LIGHTING UNIT HOUSES THE ELECTRICAL

COMPONENTS AND SOURCES

• AESTHETIC COVER IN DIE-CAST EN AB-47100 ALUMINUM

• THE ELEMENTS ARE FIXED TOGETHER BY MEANS

OF SCREWS. ALL THE LOCKING SCREWS USED

OUTSIDE THE FIXTURE AND INSIDE THE STEM ARE

IN AISI 304 STAINLESS STEEL

• THE COMPONENTS IN DIE-CAST, EXTRUDED ALUMINUM

AND STEEL ARE PAINTED BY MEANS OF 3-STAGE

OUTDOOR TREATMENT : NANOTECHNOLOGIES,


• WALL SUPPORT INCLUDED

WALL / FLOOR

Ciclope wall

30

CICLOPE FLOOR

• AVAILABLE IN UNILATERAL AND BILATERAL EMISSION

VERSION AND IN 2 HEIGHTS : 19 11/16” (50 CM)

AND 35 7/16” (90 CM)


PAINTED OR RUST

• STEM IN EXTRUDED EN AW-6060 ALUMINUM

• LIGHTING UNIT COMPOSED BY :

· FRAME IN REINFORCED POLYMER

· DIFFUSER IN LIGHT-DIFFUSING POLYCARBONATE

· PLATE IN PICKLED, MACHINED AND GALVANIZED STEEL

· WATERTIGHT GASKET IN SILICONE RUBBER

· LED CIRCUIT

· ELECTRONIC DRIVER

· REFLECTOR IN PAINTED SPUN ALUMINUM

• THE LIGHTING UNIT HOUSES THE ELECTRICAL

COMPONENTS AND SOURCES

• AESTHETIC COVER IN DIE-CAST EN AB-47100 ALUMINUM

• GROUND MOUNTING PLATE IN FOLDED, WELDED

AND PAINTED STEEL, WITH HOLES FOR GROUND FIXING

BY MEANS OF LOCK BOLTS OR DOWELS; INCLUDED

• THE ELEMENTS ARE FIXED TOGETHER BY MEANS

OF SCREWS. ALL THE LOCKING SCREWS USED

OUTSIDE THE FIXTURE AND INSIDE THE STEM ARE


• THE COMPONENTS IN DIE-CAST, EXTRUDED ALUMINUM

AND STEEL ARE PAINTED BY MEANS OF 3-STAGE

OUTDOOR TREATMENT : NANOTECHNOLOGIES,


Ciclope 50 floor

Ciclope 100 floor

31

32


CICLOPE 50 BILATERAL FLOOR

6 5/8”17 cm

2”5 cm

6 5/8”17 cm

2”5 cm

19 11/16”50 cm


T081308 10 LED 2x6.5W 568lm 3000K 80 grey white

T081318 10 LED 2x6.5W 568lm 3000K 80 rust


IP65


CICLOPE 50 UNILATERAL FLOOR

4 1/3”11 cm

6 5/8”17 cm

2”5 cm

19 11/16”50 cm


T081008 5 LED 6.5W 284lm 3000K 80 grey white

T081018 5 LED 6.5W 284lm 3000K 80 rust


IP65


CICLOPE WALL

Ciclope wall

4 1/3”11 cm

10 5/8”27 cm

6 5/8”17 cm

2”5 cm



T081218 5 LED 6.5W 284lm 3000K 80 rust


IP65


Ciclope WALL / FLOOR

33

34


CICLOPE 90 UNILATERAL FLOOR

4 1/3”11 cm

6 5/8”17 cm

2”5 cm

35 7/16”90 cm



T081118 5 LED 6.5W 284lm 3000K 80 rust


IP65


CICLOPE 90 BILATERAL FLOOR

6 5/8”17 cm

35 7/16”90 cm

2”5 cm

6 5/8”17 cm


T081408 10 LED 2x6.5W 568lm 3000K 80 grey white

T081418 10 LED 2x6.5W 568lm 3000K 80 rust


IP65


Ciclope WALL / FLOOR

35

Cuneodesign by Klaus Begasse

LIGHT FIXTURE WITH DIRECT SIDE EMISSION

AND HIGH-PERFORMANCE LED SOURCE.

• SIX MONOCHROMATIC LEDS ARE USED TOGETHER WITH

SIX COLLIMATORS AND A LIGHT-DIFFUSING PRISMATIC

SCREEN TO OBTAIN AN OPTIMUM LIGHTING BEAM

• FLOOR OR WALL INSTALLATION. IN WALL INSTALLATION,

THE LIGHT CAN BE POINTED EITHER UPWARDS OR

DOWNWARDS


PAINTED OR RUST

• COMPOSED BY LIGHTING CAP AND TERMINAL BOARD

FIXED TOGETHER BY MEANS OF LOCKING SCREWS

• CAP AND TERMINAL BOARD IN DIE-CAST

EN AB-47100 ALUMINUM, GASKETS IN SILICONE RUBBER

• ELECTRONIC DRIVER INTEGRATED IN THE FIXTURE

• PMMA COLLIMATORS INSTALLED ON THE LED LIGHT

SOURCES

• LIGHT-DIFFUSING PRISMATIC SCREEN IN PMMA SILICONED

FLUSH WITH THE LIGHTING CAP

• WALL INSTALLATION BY MEANS OF A BRACKET

IN FOLDED STEEL SHEET TO WHICH THE FIXTURE IS

FASTENED WITH 2 SCREWS


• ALL THE COMPONENTS IN DIE-CAST ALUMINUM AND

THE STEEL BRACKET FOR WALL OR FLOOR FIXING ARE

PAINTED BY MEANS OF 3-STAGE OUTDOOR TREATMENT :


POLYESTER PAINT

WALL / FLOOR

36


CUNEO

7 7/8”20 cm

2 3/4”7 cm

6 5/8”17 cm


T082908 6 LED 16W 713lm 4000K 80 32° grey white

T082918 6 LED 16W 713lm 4000K 80 32° rust

Electronic driver integratedElliptical

IP65 IK10


Elliptical optic

The elliptical light emission and the flat shape of the fixture make it particularly suitable for floors or spacious areas in gardens to provide a side lighting.

Cuneo WALL / FLOOR

37

Effettodesign by Ernesto Gismondi

WALL

38

LIGHT FIXTURE WITH 1, 2 OR 4 LIGHT BEAMS USING MONOCHROMATIC LED LIGHT SOURCES.

LIGHT-DIFFUSING LENSES OPTIMIZE THE OPTICAL PERFORMANCE OF THE BEAMS AND ESTABLISH THEIR WIDTH.

DESIGNED TO CREATE GEOMETRIC LIGHTS OF SCENIC EFFECT. AVAILABLE WITH BEAMS OF THE SAME SPREAD OR

WITH COMBINED BEAMS.

• BEAM SPREAD OF 5° AND 50° FOR SQUARE VERSION;

4° AND 40° FOR EFFETTO ROUND VERSION

• WALL INSTALLATION


PAINTED OR RUST

• COMPOSED BY LIGHTING CAP UNIT AND

TERMINAL BOARD FIXED TOGETHER BY MEANS

OF LOCKING DOWELS

• CAP IN DIE-CAST EN AB-47100 ALUMINUM

• TERMINAL BOARD IN REINFORCED POLYMER

• WATERTIGHT GASKET IN SILICONE RUBBER


• PMMA LENSES SILICONED TO BODY TO OBTAIN

2 DIFFERENT BEAM ANGLE OPENINGS (NARROW AND WIDE)


TEMPERATURES :


• LOCKING DOWELS USED OUTSIDE THE FIXTURE





39

40


EFFETTO 1 NARROW BEAM / 1 LARGE BEAM

5 1/2”14 cm

5 1/2”14 cm


T4201NLW08 2 LED 9W 23lm 3000K 80 1x5°+1x50° grey white

T4201NLW18 2 LED 9W 23lm 3000K 80 1x5°+1x50° rust

T4201NLN08 2 LED 9W 23lm 4000K 75 1x5°+1x50° grey white

T4201NLN18 2 LED 9W 23lm 4000K 75 1x5°+1x50° rust


Double emission Spot/Wide flood

IP65

EFFETTO 2 NARROW BEAMS

5 1/2”14 cm

5 1/2”14 cm



T42012NW18 2 LED 9W 22lm 3000K 80 2x5° rust


T42012NN18 2 LED 9W 24lm 4000K 75 2x5° rust


Double emission Spot

IP65

EFFETTO 1 LARGE BEAM

5 1/2”14 cm

5 1/2”14 cm


T42021LW08 1 LED 4.5W 12lm 3000K 80 1x50° grey white

T42021LW18 1 LED 4.5W 12lm 3000K 80 1x50° rust

T42021LN08 1 LED 4.5W 13lm 4000K 75 1x50° grey white

T42021LN18 1 LED 4.5W 13lm 4000K 75 1x50° rust


Wide flood

IP65

EFFETTO 1 NARROW BEAM

5 1/2”14 cm

5 1/2”14 cm


T42021NW08 1 LED 4.5W 11lm 3000K 80 1x5° grey white

T42021NW18 1 LED 4.5W 11lm 3000K 80 1x5° rust

T42021NN08 1 LED 4.5W 12lm 4000K 75 1x5° grey white

T42021NN18 1 LED 4.5W 12lm 4000K 75 1x5° rust


Spot

IP65

Effetto WALL

41

42


EFFETTO 4 LARGE BEAMS

5 1/2”14 cm

5 1/2”14 cm


T42004LW08 4 LED 18W 48lm 3000K 80 4x50° grey white

T42004LW18 4 LED 18W 48lm 3000K 80 4x50° rust

T42004LN08 4 LED 18W 51lm 4000K 75 4x50° grey white

T42004LN18 4 LED 18W 51lm 4000K 75 4x50° rust


Quadruple emission Wide flood

IP65

EFFETTO 4 NARROW BEAMS

5 1/2”14 cm

5 1/2”14 cm







Quadruple emission Spot

IP65

EFFETTO 2 LARGE BEAMS

5 1/2”14 cm

5 1/2”14 cm







Double emissionWide flood

IP65

Effetto WALL

43


EFFETTO ROUND 1 NARROW BEAM / 1 LARGE BEAM

ø 6 5/16”ø 16 cm

5 1/2”14 cm


T4211NLW08 2 LED 9W 16lm 3000K 80 1x4°+1x40° grey white

T4211NLW18 2 LED 9W 16lm 3000K 80 1x4°+1x40° rust

T4211NLN08 2 LED 9W 17lm 4000K 75 1x4°+1x40° grey white

T4211NLN18 2 LED 9W 17lm 4000K 75 1x4°+1x40° rust


Double emission Spot/Wide flood

IP65

EFFETTO ROUND 2 NARROW BEAMS

ø 6 5/16”ø 16 cm

5 1/2”14 cm







Double emission Spot

IP65

EFFETTO ROUND 1 LARGE BEAM

ø 6 5/16”ø 16 cm

5 1/2”14 cm


T42121LW08 1 LED 4.5W 9lm 3000K 80 1x40° grey white

T42121LW18 1 LED 4.5W 9lm 3000K 80 1x40° rust

T42121LN08 1 LED 4.5W 10lm 4000K 75 1x40° grey white

T42121LN18 1 LED 4.5W 10lm 4000K 75 1x40° rust


Wide flood

IP65

EFFETTO ROUND 1 NARROW BEAM

ø 6 5/16”ø 16 cm

5 1/2”14 cm


T42121NW08 1 LED 4.5W 7lm 3000K 80 1x4° grey white

T42121NW18 1 LED 4.5W 7lm 3000K 80 1x4° rust

T42121NN08 1 LED 4.5W 7lm 4000K 75 1x4° grey white

T42121NN18 1 LED 4.5W 7lm 4000K 75 1x4° rust


Spot

IP65

Effetto WALL

44


EFFETTO ROUND 4 LARGE BEAMS

ø 6 5/16”ø 16 cm

5 1/2”14 cm







Quadruple emission Wide flood

IP65

EFFETTO ROUND 4 NARROW BEAMS

ø 6 5/16”ø 16 cm

5 1/2”14 cm







Quadruple emission Spot

IP65

EFFETTO ROUND 2 LARGE BEAMS

ø 6 5/16”ø 16 cm

5 1/2”14 cm







Double emissionWide flood

IP65

Effetto WALL

45

Epulodesign by Ernesto Gismondi

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

• FLOOR, WALL AND SOFFIT/CEILING INSTALLATION

• AVAILABLE IN 2 SIZES : EPULO 13, EPULO 18



• COMPOSED BY ADJUSTABLE LIGHTING UNIT, TERMINAL

BOARD AND FIXING BRACKET. ROTATION ON THE BASE

+/-180°, SIDE BODY TILT +/-45° AND FRONT BODY TILT

+/-90° BY MEANS OF A SPHERICAL JOINT ALLOWING AN

ACCURATE ADJUSTMENT

• BODY AND TERMINAL BOARD IN EN AB44100 ALUMINUM,

FIXING BRACKET IN STAINLESS STEEL, SILICONE GASKETS


• SILKSCREENED TEMPERED GLASS SILICONED FLUSH

WITH THE BODY TO AVOID BACKWATER

• GLASS THICKNESS OF 0.2” (5MM) FOR EPULO 13 AND

0.3” (8MM) FOR EPULO 18




TEMPERATURES :







46


Spot optic


10° optic

Flood optic


34° optic

Wall Washer optic


7° x 48° optic

Epulo WALL / CEILING / FLOOR

47


EPULO 13

12 5/16”31,3 cm

5 1/8”13 cm

6 1/8”15,6 cm


Spot beam






Spot

Flood beam






Flood








IP65 IK06


48


EPULO 18

15 1/4”38,7 cm

7 1/16”18 cm

6 1/8”15,6 cm


Spot beam






Spot

Flood beam






Flood








IP65 IK06


49

Danese Milano, Milan (Italy)50

51

Eracleadesign by Neil Poulton

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE

MONOCHROMATIC LED LIGHT SOURCES.

• FLOOR INSTALLATION

• GREY WHITE (RAL9002) FINISH

• LAMP UNIT IN DIE-CAST CONCRETE, PAINTED WITH 3-STAGE

OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER,

POLYESTER PAINT

• UV RESISTANT DIFFUSER IN TRANSPARENT SHOCK RESISTANT

POLYCARBONATE

• PAINTED TRAPEZOIDAL LAMP SUPPORT IN VIBRATED CONCRETE,

WITH GALVANIZED RING FOR FIXING

TO THE BASE

• ACCESSORY COMPARTMENT IN POLYMERS WITH CLOSURE COVER

IN AISI 316

• HOT GALVANIZED STEEL MOUNTING PLATE, WITH HOLES FOR GROUND

FIXING BY MEANS OF LOCK BOLTS OR DOWELS

• ELECTRONIC DRIVER INTEGRATED


SEAL GASKET

• PROVIDED WITH IP67 CABLE AND CONNECTOR FOR THE MAIN

CONNECTIONS

FLOOR

52


ERACLEA

5 1/8”13 cm

31 1/2”80 cm

20”51 cm



Electronic driver integratedBidirectional

IP65

Eraclea FLOOR

53

Falangedesign by Wilmotte & Industries


54

ADJUSTABLE LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

• FLOOR, WALL AND SOFFIT INSTALLATION

• AVAILABLE IN 2 SIZES : SQUARE 5 5/16” X 5 5/16”

(13,4 CM X 13,4 CM) OR RECTANGULAR

9 3/8” X 5 5/16” (23,8 CM X13,4 CM)



• COMPOSED BY ADJUSTABLE LIGHTING UNIT AND

SUPPORT (HOUSING THE WIRING). ROTATION ON BASE

+/-180°, BODY TILT +/-100° BY MEANS OF A GRADUATED

METAL RING ALLOWING AN ACCURATE ADJUSTMENT.

POSITIONING IS MAINTAINED BY MEANS OF LOCKING

DOWELS

• BODY AND SUPPORT IN EN AB44100 ALUMINUM,

SILICONE GASKETS

• GLASS THICKNESS OF 0.4” (10MM)


• SILKSCREENED TEMPERED GLASS SILICONED

TO A SECONDARY FRAME




TEMPERATURES :


• AISI 316 STAINLESS STEEL SCREWS




55


FALANGE 9

8 7/16”21,4 cm

4 1/8”10,5 cm

5 5/16”13,4 cm

5 5/16”13,4 cm


Spot beam

NL3000010K002UL 9 LED 27W 879lm 3000K 80 9° grey white

NL3000010K005UL 9 LED 27W 879lm 3000K 80 9° anth. grey

NL3000010W002UL 9 LED 27W 879lm 4000K 75 9° grey white

NL3000010W005UL 9 LED 27W 879lm 4000K 75 9° anth. grey


Spot

Flood beam






Flood


NL30000ELK002UL 9 LED 27W 971lm 3000K 80 6°x45° grey white

NL30000ELK005UL 9 LED 27W 971lm 3000K 80 6°x45° anth. grey

NL30000ELW002UL 9 LED 27W 971lm 4000K 75 6°x45° grey white

NL30000ELW005UL 9 LED 27W 971lm 4000K 75 6°x45° anth. grey



IP65 IK10

Spot optic


9° optic

Flood optic


32° optic

Wall Washer optic


6°x45° optic

Falange WALL / CEILING / FLOOR

56


FALANGE 18

Falange18

9 3/8”23,8 cm

8 7/16”21,4 cm

4 1/8”10,5 cm

5 5/16”13,4 cm


Spot beam






Spot

Flood beam






Flood


NL30001ELK002UL 18 LED 44W 1661lm 3000K 80 7°x48° grey white

NL30001ELK005UL 18 LED 44W 1661lm 3000K 80 7°x48° anth. grey

NL30001ELW002UL 18 LED 44W 1899lm 4000K 75 7°x48° grey white

NL30001ELW005UL 18 LED 44W 1899lm 4000K 75 7°x48° anth. grey



IP65 IK10

Falange WALL / CEILING / FLOOR

57

Giasoledesign by Ernesto Gismondi

SERIES OF LIGHT FIXTURES WITH DIFFUSED EMISSION

AND HALOGEN OR FLUORESCENT SOURCES.

GIASOLE WALL / CEILING

• HORIZONTAL OR VERTICAL INSTALLATION

• AVAILABLE IN 3 FINISHES : WHITE PAINTED, SILVER GREY OR BLACK

• LAMP UNIT AND WALL SUPPORT IN DIE-CAST EN-AB 46100 ALUMINUM

WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES,

ANTIOXYDANT PRIMER, POLYESTER PAINT

• MOLDED DIFFUSER IN INTERNALLY SANDED SODIUM-CALCIUM GLASS

• STAINLESS STEEL SCREWS AND SILICONE SEAL GASKETS

• SUITABLE FOR WATERTIGHT CONNECTION

• WALL SUPPORT INCLUDED


58

GIASOLE FLOOR

• UNILATERAL VERSION WITH ONE HEAD

• AVAILABLE IN 2 FINISHES : SILVER GREY PAINTED OR BLACK

• LAMP UNIT AND FLOOR SUPPORT IN DIE-CAST EN-AB 46100 ALUMINUM

WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES,


• MOLDED DIFFUSER IN INTERNALLY SANDED SODIUM-CALCIUM GLASS

• POLE IN PAINTED EXTRUDED ALUMINUM TO BE ORDERED SEPARATELY

• FIXING WITH GROUND MOUNTING PLATE OR UNDERGROUND POLE

• SUPPORT PLATE IN GALVANIZED AND PAINTED STEEL

• STAINLESS STEEL SCREWS AND SILICONE SEAL GASKETS


59


GIASOLE WALL / CEILING

Giasole wall

13”33 cm

4 3/4”12 cm

5 15/16”15 cm

code lamping finish

T051308 HAL max 1x75W (E26) white

T051338 HAL max 1x75W (E26) black

T051398 HAL max 1x75W (E26) silver grey

120V line voltage

Diffused

T051408 FLU 1x18W (G24d-2) white

T051438 FLU 1x18W (G24d-2) black

T051498 FLU 1x18W (G24d-2) silver grey

120V line voltage

Diffused

IP54

Giasole WALL / CEILING / FLOOR

60


GIASOLE UNILATERAL FLOOR

5 15/16”15 cm

41 3/4”106 cm

6 1/8”15,5 cm

code lamping finish

T051338 HAL max 1x75W (E26) - one head black

T051398 HAL max 1x75W (E26) - one head silver grey

120V line voltageDiffused

T051438 FLU 1x18W (G24d-2) - one head black

T051498 FLU 1x18W (G24d-2) - one head silver grey

120V line voltageDiffused

T053400 Flanged pole black

T053490 Flanged pole silver grey

For unilateral floor model, please order one head and a flanged pole

IP54

Giasole WALL / CEILING / FLOOR

61

Hiladesign by Carlo Colombo

HILA WALL

• COMPOSED BY LAMP AND WALL SUPPORT




POLYCARBONATE WITH SATIN FINISH, PROVIDED

WITH HIGH-EFFICIENCY LIGHT-DIFFUSING LENSES

• WALL SUPPORT IN PAINTED STEEL INCLUDED





SEAL GASKET


• PROVIDED WITH IP67 CABLE AND CONNECTOR

FOR THE MAIN CONNECTIONS

WALL / FLOOR

SERIES OF LIGHT FIXTURES WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

62


HILA FLOOR

• COMPOSED BY LAMP, SUPPORT POLE AND GROUND

MOUNTING PLATE




POLYCARBONATE WITH SATIN FINISH, PROVIDED

WITH HIGH-EFFICIENCY LIGHT-DIFFUSING LENSES

• SUPPORT POLE : 35 7/16” (90 CM) HIGH IN EXTRUDED

EN-AW-6060 ALUMINUM, CHROMATE TREATED

AND PAINTED

• MOUNTING PLATE IN PAINTED STEEL, WITH HOLES FOR

GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS;

INCLUDED





SEAL GASKET




Hila WALL / FLOOR

63

Danese Milano, Milan (Italy)64


HILA WALL

Hila wall

11”28 cm

3 9/16”9 cm

6 5/16”16 cm

14 9/16”37 cm



Electronic driver integratedAsymm. Wide Flood

IP65


HILA FLOOR

Hila floor

35 7/16”90 cm

3 1/8”8 cm

6 5/16”16 cm

14 9/16”37 cm



Electronic driver integratedAsymm. Wide Flood

IP65


Hila WALL / FLOOR

65

Ippolitodesign by Alessandro Pedretti (Studio Rota & Partners)

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE MONOCHROMATIC LED LIGHT SOURCES.

• FLOOR INSTALLATION

• AVAILABLE IN 2 SIZES: 17 11/16” (45 CM)

AND 35 7/16” (90 CM)

• CYLINDRICAL LAMP SUPPORT IN ENGINEERING POLYMER

(COMPACT POLYURETHANE), REINFORCED WITH

CO-MOLDED GALVANIZED STEEL ELEMENTS. PAINTED

WITH POLYURETHANE RESISTANT TO ATMOSPHERIC

AND CHEMICAL AGENTS

• LAMP UNIT IN DIE-CAST EN-AB 47100 ALUMINUM,

PAINTED WITH 3-STAGE OUTDOOR TREATMENT :


POLYESTER PAINT

• UV RESISTANT DIFFUSER IN TRANSPARENT SHOCK

RESISTANT POLYCARBONATE

• POWER SUPPLY COMPARTMENT IN POLYMERS

WITH CLOSURE COVER IN AISI 316 STAINLESS STEEL

• HOT GALVANIZED STEEL MOUNTING PLATE,

WITH HOLES FOR GROUND FIXING BY MEANS

OF LOCK BOLTS OR DOWELS



SEAL GASKET



FLOOR

66


IPPOLITO 45

17 11/16”45 cm

ø 7 7/8”ø 20 cm


T085108 1 LED COB 14.9W 1050lm 3000K 80anth. grey /

light grey

Electronic driver integrated Asymm.

IP65

IPPOLITO 90

35 7/16”90 cm

ø 7 7/8”ø 20 cm


T085008 1 LED COB 14.9W 1050lm 3000K 80anth. grey /

light grey

Electronic driver integrated Asymm.

IP65

Ippolito FLOOR

67

LineaLed drive-overDesign by Carlotta de Bevilacqua

RECESSED LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES.

• DRIVE-OVER RECESSED FLOOR INSTALLATION

• DRIVE OVER APPROVED UP TO 11023 LBS (5000 KG)

• AVAILABLE IN 2 LENGTHS 24 5/16” (61,8CM),

38 1/2” (97,8CM)

• FLOOR RECESSING BOX IN STEEL

• ELECTRICAL CONNECTION TO THE DRIVER BY MEANS OF

39 3/8” (100 CM) LONG 2-POLE CABLE, WITH IP68 QUICK-

RELEASE TERMINAL BLOCK WHICH IS SUPPLIED WITH THE

FIXTURE AND CAN BE HOUSED IN THE RECESSING BOX

• BODY IN EXTRUDED EN AW6060 T5 ALUMINUM

• END CAPS IN INJECTION-MOLDED POLYCARBONATE WITH

SILICONE GASKET

• 5/16” (8 MM)-THICK OPAL NON-SLIPPERY TEMPERED GLASS

• GLASS SURFACE TEMPERATURE LOWER THAN 95°F (35°C)

• RECESSING BOX FOR LAYING IN AISI 304 STAINLESS STEEL

• END CAPS AND ACCESSORIES FOR SERIES CONNECTION

(TO BE ORDERED SEPARATELY)

• FOR APPROPRIATE DRIVER INFORMATION AND PRICE,

PLEASE CONTACT YOUR LOCAL ARTEMIDE SALES

REPRESENTATIVE

• BODY FASTENED TO THE RECESSING BOX BY MEANS

OF PROPER PRE-STRESSED STEEL SPRINGS SUPPLIED

WITH THE FIXTURE

• PAINTED PROFILE WITH 2-STAGE OUTDOOR TREATMENT:

PRIMER, OUTDOOR PAINT


TEMPERATURES:

· WARM=3000K / NEUTRAL=4000K.

• LINEALED 60: CONNECT A MAXIMUM NUMBER

OF 16 FIXTURES IN A CONTINUOUS LINE

• LINEALED 100: CONNECT A MAXIMUM NUMBER

OF 10 FIXTURES IN A CONTINUOUS LINE

• INSTALLATION MUST BE CARRIED OUT BY SPECIALIZED

PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

FLOOR

68


Recessing box

0.06” (1,5mm)-thick end cap for recessed housing

LineaLed

LINEALED DRIVE-OVER

1 9/16”3,95 cm

1 11/16”4,25 cm

1 7/8”4,75 cm

2 9/16”6,5 cm

24 5/16” - 38 1/2”61,8 cm - 97,8 cm


Linealed drive-over - L=24 5/16” (61,8 cm)

NL7398VSK0UL LED 5W 270lm 3000K 80 aluminum

NL7398VSW0UL LED 5W 300lm 4000K 80 aluminum

24 Vdc remote driver supplied separately

Linealed drive-over - L= 38 1/2” (97,8 cm)

NL7419VSK0UL LED 8W 432lm 3000K 80 aluminum

NL7419VSW0UL LED 8W 480lm 4000K 80 aluminum

24 Vdc remote driver supplied separately

Wide flood

Linealed parts

NL76670 Recessing box - L=24 1/2” (62,2 cm)

NL76680 Recessing box - L=38 11/16” (98,2 cm)

NL75810 Connection bracket for recessed housing

NL74890 1/16” (1,5mm)-thick end cap for recessed housing (Pair)

NL19052UL Power feed connector and connector end cap

IP67

LineaLed

Power feed connector and connector end cap

Recessing boxEnd capfor recessed housing

End capfor recessed housing

Connection bracketfor recessed housing

LineaLed FLOOR

69

Minispot

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION

AND HIGH-PERFORMANCE LED LIGHT SOURCE.

• GROUND, FLOOR OR WALL INSTALLATION

• COMPOSED BY BODY, METAL RING AND DIFFUSER IN TRANSPARENT

POLYCARBONATE

• BODY AND METAL RING IN COMPUTER NUMERICAL CONTROL

MACHINED BILLET ANTICORODAL ALUMINUM

• SPOT PAINTED WITH 2-STAGE OUTDOOR TREATMENT :


• SILICONE GASKETS

• 39 3/8” (100 CM) LONG 2-POLE CONNECTION CABLE

• FIXED OPTIC. PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS:

SPOT, FLOOD OR WIDE FLOOD


TEMPERATURES :


• PICKET FOR GROUND INSTALLATION IN GALVANIZED IRON

• FOR APPROPRIATE DRIVER INFORMATION AND PRICE, PLEASE CONTACT

YOUR LOCAL ARTEMIDE SALES REPRESENTATIVE

• INSTALLATION MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL.

CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

WALL / FLOOR

70


MINISPOT

1 5/16”3,3 cm

1 3/16”3 cm

13/16”2 cm

3 15/16”10 cm


Spot beam

NL702910K0UL 1 LED 3W 75lm 3000K 80 10° silver grey

NL702910W0UL 1 LED 3W 80lm 4000K 80 10° silver grey Spot

Flood beam

NL702925K0UL 1 LED 3W 75lm 3000K 80 25° silver grey

NL702925W0UL 1 LED 3W 80lm 4000K 80 25° silver grey Flood

Wide flood beam

NL7029ELK0UL 1 LED 3W 75lm 3000K 80 25ºx45º silver grey

NL7029ELW0UL 1 LED 3W 80lm 4000K 80 25ºx45º silver grey Wide flood

Accessory

NL97150UL Ground installation spike

IP65

Private residence Milan (It) Architectural project : Erna Corbetta

1 7/16”3,7 cm

Ground installation spike

7”18 cm

Minispot WALL / FLOOR

71

Molladesign by Ernesto Gismondi

LIGHT FIXTURE WITH 2 LIGHT SOURCES : THE LARGE ONE WITH LIGHTING FUNCTION

AND THE NARROW ONE WITH DECORATIVE FUNCTION.

• WALL INSTALLATION. THE FIXTURE CAN BE INSTALLED

WITH THE LARGE BEAM POINTED EITHER DOWNWARDS

OR UPWARDS ACCORDING TO THE KIND OF LIGHTING

DESIRED (DIRECT OR INDIRECT)



• THE LARGE BEAM IS OBTAINED BY THE COMBINATION

OF A MONOCHROMATIC LED LIGHT SOURCE WITH A

REFLECTOR. THE NARROW BEAM IS OBTAINED BY THE

COMBINATION OF A MONOCHROMATIC LED LIGHT

SOURCE WITH A HIGH-PERFORMANCE PROJECTOR

• COMPOSED BY LIGHTING CAP UNIT AND

TERMINAL BOARD FIXED TOGETHER BY MEANS

OF LOCKING SCREWS

• CAP AND TERMINAL BOARD IN DIE-CAST

EN AB-47100 ALUMINUM

• WATERTIGHT GASKET IN SILICONE RUBBER


• PROJECTOR COMPOSED BY A BODY IN REINFORCED

POLYMER AND PMMA LENSES

• TEMPERED AND SILKSCREENED LIGHT-DIFFUSING

GLASSES, SILICONED FLUSH WITH THE LIGHTING CAP

• WALL FIXING BY MEANS OF A BRACKET IN FOLDED

STEEL SHEET TO WHICH THE FIXTURE IS FASTENED

WITH 2 SCREWS

• LOCKING SCREWS USED OUTSIDE THE FIXTURE


• DIE-CAST ALUMINUM AND BRACKET PAINTED WITH

3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES,


WALL

72


MOLLA

9”22,9 cm

4 3/16”10,6 cm

6 3/8”16,3 cm

code emission lamping power consumption lumens CCT CRI beam finish

T4190NLW08indirectdirect

1 LED1 LED

10W2W

400lm63lm

3000K3000K

8280

90°8°

grey white

T4190NLW18indirectdirect

1 LED1 LED

10W2W

400lm63lm

3000K3000K

8280

90°8°

anth. grey

T4190NLN08indirectdirect

1 LED1 LED

10W2W

400lm63lm

4000K4000K

8075

90°8°

grey white

T4190NLN18indirectdirect

1 LED1 LED

10W2W

400lm63lm

4000K4000K

8075

90°8°

anth. grey


Double emission Spot/ Wide flood

IP65

Molla WALL

73

Naiade drive-overdesign by Ernesto Gismondi


• RECESSED FLOOR INSTALLATION WITH 3 SIZES:

2 3/16” (5,5 CM), 3 9/16” (9 CM), 5 7/8” (15 CM)

• DRIVE OVER APPROVED UP TO 11023 LBS (5000 KG)

• ROUND AND SQUARE VERSIONS COMPOSED BY BODY,

FRAME, BLACK SILKSCREENED TEMPERED GLASS,

RECESSING BOX

• BODY IN EN AB44100 ALUMINUM, SILICONE GASKETS;

PROVIDED WITH 11 13/16” (30 CM) LONG PRE-RESINED

THREE-POLE CONNECTION CABLE

• FOR VERSION 150: ELECTRONIC DRIVER INTEGRATED

IN THE BODY

• FOR VERSIONS 90 AND 55: FOR DRIVER INFORMATION

AND PRICE, PLEASE CONSULT YOUR LOCAL SALES

REPRESENTATIVE

• ROUND OR SQUARE FRAME IN 0.1” (3 MM) THICK

STAINLESS STEEL

• FIXING TO THE RECESSING BOX IS ENSURED BY MEANS

OF ANTI-VANDAL TORX SCREWS


• GLASS THICKNESS OF 0.3” (8MM) FOR NAIADE 55, 0.4”

(10MM) FOR NAIADE 90, 0.6” (15MM) FOR NAIADE 150

• RECESSING BOX IN REINFORCED POLYMER

• ADJUSTABLE OPTICS. PMMA LENSES IN 3 DIFFERENT

VERSIONS OF BEAMS


TEMPERATURES:


• VERSION 150: CIRCUIT OPERATION IS ASSURED ALSO IN

CASE OF DAMAGE TO ONE OR SEVERAL LEDS



TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT



PERSONNEL. CAREFULLY FOLLOW PROVIDED

INSTRUCTIONS

FLOOR

74


Round or square frame in stainlesssteel. Silkscreened tempered glass.

Lighting unit

Recessing box Recessed depth:Naiade 55 3 15/16” (10 cm)Naiade 90 3 15/16” (10 cm)Naiade 150 4 3/4” (12 cm)

Spot optic


Flood optic


Wall Washer optic


Naiade FLOOR

75

Milanofiori North Residential Complex Assago, Milan (IT) Architectural project : OBR - Paolo Brescia, Tommaso Principi76


NAIADE 55 DRIVE-OVER ROUND

ø 7 1/2”ø 19 cm

ø 2 3/16”ø 5,5 cm

3 15/16”10 cm


Spot fixed beam

T403210W08 1 LED 1.5W 66lm 3000K 80 14° stainless steel

T403210N08 1 LED 1.5W 76lm 4000K 75 14° stainless steel Spotfixed beam

Flood fixed beam


T403239N08 1 LED 1.5W 70lm 4000K 75 31° stainless steel Flood fixed beam

Elliptical wall washer fixed beam

T4032ELW08 1 LED 1.5W 62lm 3000K 80 16°x34° stainless steel

T4032ELN08 1 LED 1.5W 71lm 4000K 75 16°x34° stainless steel Elliptical wall washer fixed beam

T409908 Recessing box

IP65/67 IK10

NAIADE 55 DRIVE-OVER SQUARE

7 1/2”19 cm

2 3/16”5,5 cm

3 15/16”10 cm


Spot fixed beam


T400210N08 1 LED 1.5W 76lm 4000K 75 14° stainless steel Spotfixed beam

Flood fixed beam


T400239N08 1 LED 1.5W 70lm 4000K 75 31° stainless steel Flood fixed beam



T4002ELN08 1 LED 1.5W 71lm 4000K 75 16°x34° stainless steel Elliptical wall washer fixed beam


IP65/67 IK10

Naiade FLOOR

77



ø 7 1/2”ø 19 cm

ø 3 9/16”ø 9 cm

3 15/16”10 cm


Spot adjustable beam


T403310N08 3 LED 3.5W 201lm 4000K 75 9° stainless steel Spotadjustable beam+0° -8°

Flood adjustable beam


T403339N08 3 LED 3.5W 164lm 4000K 75 24° stainless steel Floodadjustable beam+0° -8°

Wall washer adjustable beam

T4033ELW08 3 LED 3.5W 160lm 3000K 80 28° stainless steel

T4033ELN08 3 LED 3.5W 183lm 4000K 75 28° stainless steel Wall washeradjustable beam+0° -8°


IP65/67 IK10


7 1/2”19 cm

3 9/16”9 cm

3 15/16”10 cm




T400310N08 3 LED 3.5W 201lm 4000K 75 9° stainless steel Spotadjustable beam+0° -8°



T400339N08 3 LED 3.5W 164lm 4000K 75 24° stainless steel Floodadjustable beam+0° -8°



T4003ELN08 3 LED 3.5W 183lm 4000K 75 28° stainless steel Wall washeradjustable beam+0° -8°


IP65/67 IK10

Naiade FLOOR

78



ø 10 3/16”ø 26 cm

ø 5 7/8”ø 15 cm

4 3/4”12 cm




T403610N08 4 LED 7.5W 190lm 4000K 75 6° stainless steel


Spotadjustable beam+/- 15°





Floodadjustable beam+/- 15°

Elliptical wall washer adjustable beam


T4036ELN08 4 LED 7.5W 328lm 4000K 75 7°x48° stainless steel


Elliptical wall washer adjustable beam+/- 15°


IP65/67 IK10


10 3/16”26 cm

5 7/8”15 cm

4 3/4”12 cm
















Elliptical wall washeradjustable beam+/- 15°


IP65/67 IK10

Naiade FLOOR

79

Naiade downlightdesign by Ernesto Gismondi

DOWNLIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES.

• RECESSED CEILING INSTALLATION

• AVAILABLE IN 3 SIZES: 2 3/16” (5,5 CM), 3 9/16” (9 CM),

5 7/8” (15 CM)

• ROUND AND SQUARE VERSION

• COMPOSED BY BODY, FRAME AND BLACK SILKSCREENED

TEMPERED GLASS


PROVIDED WITH 11 13/16” (30 CM) LONG PRE-RESINED


• FOR VERSION 150: ELECTRONIC DRIVER INTEGRATED

IN THE BODY

• FOR VERSIONS 90 AND 55: FOR DRIVER INFORMATION

AND PRICE, PLEASE CONSULT YOUR LOCAL SALES

REPRESENTATIVE

• ROUND OR SQUARE FRAME IN 0.1” (3 MM) THICK

STAINLESS STEEL OR ALUMINUM PAINTED IN GREY WHITE

(RAL9002)

• INSTALLATION WITH BUILT-IN SPRINGS

• ADJUSTABLE OPTICS.PMMA LENSES IN 3 DIFFERENT

VERSIONS OF BEAMS


• GLASS THICKNESS OF 0.3” (8MM) FOR NAIADE 55,

0.4” (10MM) FOR NAIADE 90, 0.6” (15MM) FOR NAIADE 150


TEMPERATURES:


• VERSION 150: CIRCUIT OPERATION IS ASSURED ALSO IN

CASE OF DAMAGE TO ONE OR SEVERAL LEDS



TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT




INSTRUCTIONS

CEILING

80


Naiade 150 downlightRecessed depth : 4 3/4” (12 cm)

Cut-out dimensions:

ø 5 5/16” (13,5 cm) ± 0.08” (2 mm)

5 5/16” (13,5 cm) ± 0.08” (2 mm)

Naiade 90 downlightRecessed depth : 3 1/8” (9 cm)

Cut-out dimensions:

ø 3 1/8” (8 cm) ± 0.08” (2 mm)

3 1/8” (8 cm) ± 0.08” (2 mm)

Naiade 55 downlightRecessed depth : 3 11/16” (9,4 cm)

Cut-out dimensions:

ø 1 7/8” (4,7 cm) ± 0.04” (1 mm)

1 7/8” (4,7 cm) ± 0.04” (1 mm)

Spot optic


Flood optic


Wall Washer optic


Built-in springs

Naiade CEILING

81



NAIADE 55 DOWNLIGHT ROUND

ø 2 3/16”ø 5,5 cm

3 11/16”9,4 cm

ø 1 7/8” ± 0.04” ø 4,7 cm ± 1 mm


Spot fixed beam

T408110W08 1 LED 1.5W 66lm 3000K 80 14° grey white


T408110N08 1 LED 1.5W 76lm 4000K 75 14° grey white


Spotfixed beam

Flood fixed beam





Floodfixed beam


T4081ELW08 1 LED 1.5W 62lm 3000K 80 16°x34° grey white


T4081ELN08 1 LED 1.5W 71lm 4000K 75 16°x34° grey white


Elliptical wall washerfixed beam

IP65/67 IK10

NAIADE 55 DOWNLIGHT SQUARE

2 3/16”5,5 cm

3 11/16”9,4 cm

□ 1 7/8” ± 0.04”□ 4,7 cm ± 1 mm


Spot fixed beam





Spotfixed beam

Flood fixed beam





Floodfixed beam






Elliptical wall washerfixed beam

IP65/67 IK10

Naiade CEILING

83



ø 3 9/16”ø 9 cm

3 9/16”9 cm

ø 3 1/8” ± 0.08”ø 8 cm ± 2 mm







Spotadjustable beam+0° -8°






Floodadjustable beam+0° -8°


T4083ELW08 3 LED 3.5W 160lm 3000K 80 28° grey white


T4083ELN08 3 LED 3.5W 183lm 4000K 75 28° grey white

T4082ELN08 3 LED 3.5W 183lm 4000K 75 28° stainless steel

Wall washeradjustable beam+0° -8°

IP65/67 IK10


3 9/16”9 cm

3 9/16”9 cm

□ 3 1/8”± 0.08” □ 8 cm ± 2 mm







Spotadjustable beam+0° -8°






Floodadjustable beam+0° -8°


T4063ELW08 3 LED 3.5W 160lm 3000K 80 28° grey white


T4063ELN08 3 LED 3.5W 183lm 4000K 75 28° grey white

T4062ELN08 3 LED 3.5W 183lm 4000K 75 28° stainless steel

Wall washeradjustable beam+0° -8°

IP65/67 IK10

Naiade CEILING

84



4 11/16”12 cm

ø 5 7/8”ø 15 cm

ø 5 5/16”± 0.08” ø 13,5 cm ± 2 mm























IP65/67 IK10


4 11/16”12 cm

5 7/8”15 cm

□ 5 5/16”± 0.08” □ 13,5 cm ± 2 mm























IP65/67 IK10

Naiade CEILING

85

WALL AND CEILING LIGHT FIXTURE WITH DIFFUSED EMISSION AND HALOGEN, FLUORESCENT OR LED SOURCES.

• LAMP UNIT IN AISI 316 STAINLESS STEEL

• MOLDED COVERING FRAME IN AISI 316 STAINLESS STEEL

• AVAILABLE IN 2 FINISHES: SATIN OR POLISHED

• AVAILABLE WITH 2 TYPES OF DIFFUSERS :

· MOLDED PRISMATIC DIFFUSER IN SODIUM-CALCIUM

GLASS WITH INTERNAL SATIN FINISH FOR HAL AND FLU

VERSIONS OR WHITE FINISH FOR LED VERSION

TO AVOID GLARING OF THE LAMPS

· MOLDED PRISMATIC SHOCK RESISTANT DIFFUSER

IN OPAL UV-STABILIZED THERMOPLASTIC MATERIAL

AVAILABLE FOR FLU AND LED SOURCES

• AISI 316 STAINLESS STEEL SCREWS AND POLYURETHANE

SEAL GASKETS


• FOR FLURESCENT AND LED VERSIONS, ELECTRONIC

BALLASTS AND DRIVERS INTEGRATED IN FIXTURE

Nikidesign by Ernesto Gismondi

WALL / CEILING

86


NIKI 3 7/8”9,8 cm

ø 12 1/4”ø 31,2 cm

code lamping finish

Niki HAL with prismatic glass diffuser

L221188 HAL max 1x75W (E26) polished

L221198 HAL max 1x75W (E26) satin

120V line voltage

Diffused

Niki FLU with prismatic glass diffuser

L220488 FLU 2x18W (G24q-2) polished

L220498 FLU 2x18W (G24q-2) satin

Electronic ballast integrated

Diffused


Niki LED with prismatic white glass diffuser

L228088 36 LED 13.3W 497lm 4000K 85 polished

L228098 36 LED 13.3W 497lm 4000K 85 satin


Diffused

IP65 IK06

Prismatic glass diffuser

LED version tested in accordance with IES LM-79-08

Prismatic white glass diffuser

NIKI 3 7/8”9,8 cm

ø 12 1/4”ø 31,2 cm

code lamping finish

Niki FLU with opal polycarbonate diffuser

L225488 FLU 2x18W (G24q-2) polished

L225498 FLU 2x18W (G24q-2) satin


Diffused


Niki LED with opal polycarbonate diffuser

L228188 36 LED 13.3W 609lm 4000K 85 polished

L228198 36 LED 13.3W 609lm 4000K 85 satin


Diffused

IP65 IK10

Opal polycarbonate diffuser


Niki WALL / CEILING

87

88

89

Nudadesign by Ernesto Gismondi

• AVAILABLE IN UNILATERAL AND BILATERAL EMISSION

VERSION AND IN 2 HEIGHTS 19 11/16” (50 CM)

AND 39 3/8” (100 CM)


PAINTED OR RUST

• COMPOSED BY LAMP, SUPPORT POLE AND GROUND

MOUNTING PLATE




• SPECULAR REFLECTOR IN ALUMINUM. IT CONVEYS

AND DIFFUSES THE LUMINOUS FLOW DOWNWARDS

ENSURING VISUAL COMFORT

• SUPPORT POLE IN EXTRUDED EN-AW-6060 ALUMINUM,

CHROMATE TREATED AND PAINTED

• MOUNTING PLATE IN FOLDED, WELDED AND PAINTED

STEEL, WITH HOLES FOR GROUND FIXING BY MEANS

OF LOCK BOLTS OR DOWELS; INCLUDED





SEAL GASKET




FLOOR

SERIES OF LIGHT FIXTURES WITH DIRECT UNILATERAL OR BILATERAL

EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES.

90

91


NUDA 50 UNILATERAL FLOOR

Nuda 50 floor

6 5/8”16,8 cm

1 7/8”4,8 cm

7 11/16”19,5 cm

5 1/8”13 cm

19 11/16”50 cm



T083618 6 LED 8W 180lm 3000K 80 rust


IP65


NUDA 50 BILATERAL FLOOR

Nuda 50

6 5/8”16,8 cm

1 7/8”4,8 cm

7 11/16”19,5 cm

5 1/8”13 cm

19 11/16”50 cm



T083718 6 LED 8W 147lm 3000K 80 rust


IP65


Nuda FLOOR

92


NUDA 100 UNILATERAL FLOOR

Nuda 100 floor

39 3/8”100 cm

7 11/16”19,5 cm

5 1/8”13 cm6 5/8”

16,8 cm1 7/8”4,8 cm



T083818 6 LED 17W 306lm 3000K 80 rust


IP65


NUDA 100 BILATERAL FLOOR

Nuda 100

39 3/8”100 cm

7 11/16”19,5 cm

5 1/8”13 cm6 5/8”

16,8 cm1 7/8”4,8 cm



T083918 6 LED 17W 250lm 3000K 80 rust


IP65


Nuda FLOOR

93


95

Orcamo walk-overdesign by Ernesto Gismondi


• WALK-OVER RECESSED FLOOR INSTALLATION


• WALK-OVER APPROVED UP TO 3307 LBS (1500 KG)

• COMPOSED BY BODY, BLACK SILKSCREENED GLASS

FLUSH WITH THE FLOOR, RECESSING BOX


PROVIDED WITH 11 13/16” (30 CM)-LONG PRE-RESINED



• FIXING TO THE RECESSING BOX IS ENSURED BY MEANS OF

ANTI-VANDAL TORX SCREWS



• RECESSING BOX IN REINFORCED POLYMER


VERSIONS OF BEAMS


TEMPERATURES :


• CIRCUIT OPERATION IS ASSURED ALSO IN CASE OF

DAMAGE TO ONE OR SEVERAL LEDS







INSTRUCTIONS

FLOOR

96


Tempered glass flush with the floor

Lighting unit

Recessing box in polymer

Recessed depth 5 1/8” (13 cm)

Spot optic

Concentrated luminous flow to highlight details avoid-ing unwanted light dispersion

Flood optic


Wall Washer optic


Orcamo FLOOR

97



ORCAMO 150 WALK-OVER SQUARE

5 7/8”15 cm

10 3/16”26 cm

5 1/8”13 cm



T410010W08 4 LED 7,5W 167lm 3000K 80 6° black

T410010N08 4 LED 7,5W 190lm 4000K 75 6° black




T410039W08 4 LED 7,5W 249lm 3000K 80 36° black

T410039N08 4 LED 7,5W 285lm 4000K 75 36° black




T4100ELW08 4 LED 7,5W 287lm 3000K 80 7°x48° black

T4100ELN08 4 LED 7,5W 328lm 4000K 75 7°x48° black




IP65/67 IK09

ORCAMO 150 WALK-OVER ROUND

ø 5 7/8”ø 15 cm

ø 10 3/16”ø 26 cm

5 1/8”13 cm



T411010W08 4 LED 7,5W 167lm 3000K 80 6° black

T411010N08 4 LED 7,5W 190lm 4000K 75 6° black




T411039W08 4 LED 7,5W 249lm 3000K 80 36° black

T411039N08 4 LED 7,5W 285lm 4000K 75 36° black




T4110ELW08 4 LED 7,5W 287lm 3000K 80 7°x48° black

T4110ELN08 4 LED 7,5W 328lm 4000K 75 7°x48° black




IP65/67 IK09

Orcamo FLOOR

99

Orcamo downlightdesign by Ernesto Gismondi

CEILING

RECESSED DOWNLIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES.

• RECESSED CEILING INSTALLATION


• COMPOSED BY BODY AND BLACK SILKSCREENED

TEMPERED GLASS


PROVIDED WITH 11 13/16” (30 CM)-LONG PRE-RESINED






VERSIONS OF BEAMS


TEMPERATURES :


• CIRCUIT OPERATION IS ASSURED ALSO IN CASE OF

DAMAGE TO ONE OR SEVERAL LEDS

• CEILING MOUNTING PLATE TO BE ORDERED SEPARATELY







INSTRUCTIONS

100


Orcamo 150 downlightRecessed depth : 5” (12,6 cm)

Cut-out dimensions:

ø 5 7/8” (15,5 cm) ± 0.08” (2mm)

5 7/8” (15,5 cm) ± 0.08” (2mm)

Spot optic


Flood optic


Wall Washer optic


Tempered glass flush with the ceiling

Installation plate

Lighting unit

Orcamo CEILING

101


ORCAMO 150 DOWNLIGHT ROUND

ø 5 7/8”ø 15 cm

5”12,6 cm

ø 6 1/8”± 0.08”ø 15,5 cm ± 2 mm



T413010W08 4 LED 7.5W 167lm 3000K 80 6° black

T413010N08 4 LED 7.5W 190lm 4000K 75 6° black




T413039W08 4 LED 7.5W 249lm 3000K 80 36° black

T413039N08 4 LED 7.5W 285lm 4000K 75 36° black




T4130ELW08 4 LED 7.5W 287lm 3000K 80 7°x48° black

T4130ELN08 4 LED 7.5W 328lm 4000K 75 7°x48° black



T409919 Installation plate

IP65/67 IK09

Orcamo CEILING

102


ORCAMO 150 DOWNLIGHT SQUARE

5 7/8”15 cm

5”12,6 cm

□ 6 1/8”± 0.08”□ 15,5 cm ± 2 mm



T412010W08 4 LED 7.5W 167lm 3000K 80 6° black

T412010N08 4 LED 7.5W 190lm 4000K 75 6° black




T412039W08 4 LED 7.5W 249lm 3000K 80 36° black

T412039N08 4 LED 7.5W 285lm 4000K 75 36° black




T4120ELW08 4 LED 7.5W 287lm 3000K 80 7°x48° black

T4120ELN08 4 LED 7.5W 328lm 4000K 75 7°x48° black



T409920 Installation plate

IP65/67 IK09

Orcamo CEILING

103

Pantareidesign by Ernesto Gismondi

WALL / CEILING

SERIES OF WALL AND CEILING LIGHT FIXTURES WITH DIFFUSED EMISSION

AND HALOGEN, FLUORESCENT OR LED SOURCES.

• AVAILABLE IN 3 SIZES: 7 1/16” (18 CM),

11 13/16” (300 CM) AND 15 3/8” (39 CM)

• AVAILABLE IN 2 FINISHES : SILVER GREY PAINTED

OR BLACK

• AVAILABLE WITH 2 TYPES OF DIFFUSERS :

· HONEYCOMB MOLDED DIFFUSER IN INTERNALLY

SANDED SODIUM-CALCIUM GLASS FOR HAL AND FLU

VERSIONS AND WITH WHITE FINISH FOR LED VERSION,

EXCEPT PANTAREI 190 LED, TO AVOID GLARING OF

THE LAMPS

· HONEYCOMB MOLDED PRISMATIC SHOCK RESISTANT

DIFFUSER IN OPAL POLYCARBONATE AVAILABLE FOR

FLU AND LED SOURCES

• LAMP UNIT IN DIE-CAST EN-AB46100 ALUMINUM WITH

3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES,



SEAL GASKETS

• FOR FLURESCENT AND LED VERSIONS, ELECTRONIC

BALLASTS AND DRIVERS INTEGRATED IN FIXTURE

104

105

106


PANTAREI 190 3 3/16”

8 cm

Pantarei 190

ø 7 1/16”ø 18 cm


Pantarei 190 LED with sanded glass diffuser

T277638 5 LED 10W 383lm 3000K 80 black

T277698 5 LED 10W 383lm 3000K 80 silver grey

T287638 5 LED 10W 383lm 4000K 80 black



Diffused

IP65 IK06


Sanded glass diffuser

PANTAREI 190 3 3/16”

8 cm

Pantarei 190

ø 7 1/16”ø 18 cm


Pantarei 190 LED with opal polycarbonate diffuser

T277738 5 LED 10W 245lm 3000K 80 black


T287738 5 LED 10W 245lm 4000K 80 black



Diffused

IP65 IK10



Pantarei WALL / CEILING

107


PANTAREI 300

Pantarei 300

3 13/16”10 cm

ø 11 13/16”ø 30 cm

code lamping finish

Pantarei 300 with sanded glass diffuser

T271638HAL max 1x75W (E26) orFLU 1x23W (E26)

black

T271698HAL max 1x75W (E26) orFLU 1x23W (E26)

silver grey

120V line voltage

Diffused

Pantarei 300 FLU with sanded glass diffuser

T276438 FLU 1x26W (G24q-3) black

T276498 FLU 1x26W (G24q-3) silver grey


Diffused





Diffused



Sanded white glass diffuser

Pantarei 300 LED with sanded white glass diffuser

T287838 36 LED 14W 498lm 3000K 85 black


T277838 36 LED 14W 498lm 4000K 80 black



Diffused

IP65



108


PANTAREI 300

Pantarei 300

3 13/16”10 cm

ø 11 13/16”ø 30 cm

code lamping finish

Pantarei 300 FLU with opal polycarbonate diffuser




Diffused





Diffused



T288038 36 LED 14W 544lm 3000K 85 black


T277938 36 LED 14W 544lm 4000K 90 black



Diffused

IP65




109

110


PANTAREI 390

Pantarei 390

5 1/8”13 cm

ø 15 3/8”ø 39 cm

code lamping finish

Pantarei 390 HAL with sanded glass diffuser

T273138 HAL max 2x60W (E26) black

T273198 HAL max 2x60W (E26) silver grey

120V line voltage

Diffused





Diffused


Pantarei 390 LED with sanded white glass diffuser

T288238 1 LED COB 29W 960lm 3000K 80 black

T288298 1 LED COB 29W 960lm 3000K 80 silver grey




Diffused

IP65 IK06



Sanded white glass diffuser

PANTAREI 390

Pantarei 390

5 1/8”13 cm

ø 15 3/8”ø 39 cm

code lamping finish





Diffused








Diffused

IP65 IK10




111

Reedsdesign by Klaus Begasse

LIGHT FIXTURE WITH DIFFUSED EMISSION AND HIGH-

PERFORMANCE LED LIGHT SOURCES

• LIGHT IS DIFFUSED THROUGH 7 PMMA RODS WITH

DIFFERENT HEIGHTS TO GIVE THE IMPRESSION OF A

GROOVE OF REEDS AND WHICH CAN BE SCREWED TO

THE BASE BY MEANS OF AISI 316 STAINLESS STEEL BUSHES

• TECHNOPOLYMER AESTHETIC COVER

REEDS IP20

• BASE MADE UP OF A TRANSPARENT POLYCARBONATE

CASING INSTALLED BETWEEN 2 ALUMINUM PLATES AND

ANTI-SCRATCH SUPPORT FEET

• COMPLETE WITH INTEGRATED BALLAST AND PLUG WITH

TRANSPARENT CABLE. SWITCHING ON/OFF ARE PERFORMED

BY MEANS OF A PEDAL PUSH BUTTON ON CORD

REEDS IP67/IP68

• BASE MADE UP OF A TRANSPARENT POLYCARBONATE

CASING INSTALLED BETWEEN 2 AISI316 STAINLESS STEEL

PLATES FIXED BY MEANS OF AISI316 STAINLESS STEEL

SCREWS. WATER SEALING IS ASSURED BY A SILICONE

GASKET. THE LIGHT FIXTURE CAN BE FASTENED TO THE

FLOOR BY MEANS OF THE HOLES IN THE LOWER PLATE.

• FOR IP67 VERSION: COMPLETE WITH INTEGRATED

BALLAST AND SUPPLIED WITH A 4’ 11” (1,5M) LONG

H05RN-F 2X1 CABLE PROVIDED WITH IP67 CONNECTOR

FOR THE ELECTRICAL CONNECTION TO THE MAINS

SUITABLE FOR 1/4”-1/2” (5-13,5MM) DIAMETER CABLES

• FOR IP68 VERSION: SUPPLIED WITH 24VDC POWER AND

IS PROVIDED WITH A 16’ 5” (5M) LONG H05RN-F 2X1

CABLE WITH IP68 CONNECTOR FOR THE ELECTRICAL

CONNECTION TO THE MAINS SUITABLE FOR 1/4”-1/2”

(5-13,5MM) DIAMETER CABLES

FLOOR

112

REEDS IP20

59”149,9 cm

8 13/16”22,4 cm

Reeds

8 5/8”21,9 cm

2 1/8”5,4 cm

code lamping power consumption lumens CCT CRI

T087308 7 LED 10W 315lm 3000K 80

Diffused

IP20

REEDS IP67

59”149,9 cm

8 13/16”22,4 cm

Reeds

8 5/8”21,9 cm

2 1/8”5,4 cm


T087408 7 LED 10W 315lm 3000K 80

Diffused

IP67

REEDS IP67 TRIPLE

59”149,9 cm

Reeds triple

16 1/2”41,8 cm

16 11/16”42,3 cm

2 1/8”5,4 cm


T087308 21 LED 30W 945lm 3000K 80

Diffused

IP67

Reeds FLOOR

113

114

REEDS IP68

59”149,9 cm

8 13/16”22,4 cm

Reeds

8 5/8”21,9 cm

2 1/8”5,4 cm


T087508 7 LED 10W 315lm 3000K 80

Diffused

IP68

REEDS IP68 TRIPLE

59”149,9 cm

Reeds triple

16 1/2”41,8 cm

16 11/16”42,3 cm

2 1/8”5,4 cm


T087808 21 LED 30W 945lm 3000K 80

Diffused

IP68

Reeds FLOOR

115

Spike

LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES.

• WALL, CEILING OR FLOOR INSTALLATION

• MONOCHROMATIC VERSION: LENGTH 40 1/8” (102 CM)

• ELECTRICAL CONNECTION TO THE DRIVER BY MEANS

OF 39 3/8” (100 CM) LONG FOUR-POLE CABLE, WITH

IP68 TERMINAL BOARD SUPPLIED WITH THE FIXTURE

• BODY IN EXTRUDED EN AW6060 T5 ALUMINUM

• 24VDC REMOTE DRIVER SUPPLIED SEPARATELY

• STOPPERS IN DIE-CAST ALUMINUM WITH

SILICONE GASKET

• ADUSTABLE BRACKETS IN ALUMINUM

• DIFFUSER IN 0.1” (3 MM) THICK TRANSPARENT

TEMPERED GLASS

• PAINTED PROFILE WITH 2-STAGE OUTDOOR TREATMENT:


• ANTIDAZZLE SCREEN IN EXTRUDED ALUMINUM PAINTED

UPON REQUEST

• PMMA LENSES IN 2 DIFFERENT VERSIONS OF BEAMS


TEMPERATURES:

· WARM = 3000K / NEUTRAL = 4000K



INSTRUCTIONS

WALL/CEILING/FLOOR

116


Spot optic


Medium optic

Medium luminous flux to highlight details, large sections of windows.

Spike WALL/CEILING/FLOOR

117

118 Palace Biandrà, Milan - IT


SPIKE

1 11/16”4,2 cm

1 3/8”3,5 cm

40 1/8”102 cm


Spot beam

NL5000410K002UL 24 LED 33.6W 1776lm 3000K 80 10° silver grey

NL5000410W002UL 24 LED 33.6W 1920lm 4000K 80 10° silver grey

24Vdc remote driver supplied separately

Components needed for dimming are available upon request.

Spot

Medium beam

NL5000430K002UL 24 LED 33.6W 1776lm 3000K 80 25° silver grey

NL5000430W002UL 24 LED 33.6W 1920lm 4000K 80 25° silver grey

24Vdc remote driver supplied separately

Components needed for dimming are available upon request.

Medium

NL50008 Antidazzle screen L=102 cm / 40 1/8”

IP65

Spike WALL/CEILING/FLOOR

119

FLOOR

120

Tolomeo XXLdesign by Michele De Lucchi & Giancarlo Fassina

LARGE SCALE LIGHT FIXTURE WITH DIRECT EMISSION,

AND FLUORESCENT SOURCES

• AVAILABLE WITH BASE OR FIXED SUPPORT (PIVOT)

MADE UP OF MASS-COLORED CONCRETE

• DIFFUSER IN MASS-PIGMENTED POLYPROPYLENE, SCREEN

IN LIGHT-DIFFUSING SILKSCREENED METHACRYLATE,

REFLECTOR IN PAINTED ALUMINUM

• MOBILE-ARM STRUCTURE IN EXTRUDED

EN-AW-6060 ALUMINUM WITH BRIGHT ANODIZING

TREATMENT

• POLISHED-PAINTED ARTICULATIONS IN DIE-CAST

EN-AB 46100 ALUMINUM

• ADJUSTMENT SYSTEM IN AISI 316 STAINLESS STEEL

• SILICONE SEAL GASKETS


• ELECTRONIC BALLAST

121

Meet Design, Turin (Italy)122


TOLOMEO XXL WITH BASE

103 1/8 ”262 cm

114 15/16”292 cm

ø 39 3/8 ”ø 100 cm

code lamping finish

1532015A FLU 2x57W (GX24q-5) silver grey

Electronic ballastWide flood

IP55

TOLOMEO XXL WITH FIXED SUPPORT

103 1/8”262 cm

114 15/16”292 cm

code lamping finish

1535015A FLU 2x57W (GX24q-5) silver grey

Electronic ballastWide flood

IP55

Tolomeo XXL FLOOR

123

124

125

126

ARTEMIDE OUTDOOR 2013

GENERAL TERMINOLOGY

DIMENSIONS

Dimensions are given in inches and centimeters.

SUPPLY VOLTAGE

All fittings are manufactured for 120V/60HZ supply voltage. UNV = Universal Voltage 120V-277V, 50 or 60Hz 347V = For commercial use in Canada where available.

CLASSIFICATIONS

Class IThe safety of the luminaire is guaranteed by an additional protective conductor (Earth) connected with the metal frame of the lamp.

Class IIThe safety of the luminaire is guaranteed by the double reinforced insulation of conductive parts, and without earth connection

Class IIIThe luminaire is fitted with a protection device against eletrical shock that features a very low voltage power supply and prevents it from generating higher voltages. Notes : a Class III luminaire does not have to be equipped with an earth protection

Luminaire suitable for installation on normally inflammable surfaces

Underwriters Laboratories, US and Canadian certified.

IP RATING

Electrical fittings are manufactured to prevent the intrusion and contact with solids and liquids. Resistance against the ingress of solids and liquids is expressed by the initials IP, followed by two digits that stand for the degree of protection : the first referring to solids, the second to liquids.

FIRST DIGIT

0. Non-protected.1. Protected against the penetration of solid objects

greater than 2” (5 cm)2. Protected against the penetration of solid objects

greater than 1/2” (1.2 cm)3. Protected against the penetration of solid objects

greater than 1/8” (0.25 cm)4. Protected against the penetration of solid objects

greater than 1/16” (0.1 cm)5. Dust-protected6. Dust-tight

SECOND DIGIT

0. Non-protected.1. Protected against dripping water.

Water equivalent to 1 mm rainfall per minute (10 minutes)

2. Protected against dripping water when tilted up to 15° from normal position Water equivalent to 3 mm rainfall per minute (10 minutes)

3. Protected against spraying water at any angle up to 60° from vertical Water volume : 0.7 litres per minute - Pressure : 80–100 kN/m² (5 minutes)

4. Protected against splashing water Water volume : 10 litres per minute - Pressure : 80–100 kN/m² (10 minutes)

5. Protected against water jets Water volume : 12.5 litres per minute - Pressure : 30 kN/m² at distance of 3m (at least 3 minutes)

6. Protected against powerful water jets Water volume : 100 litres per minute - Pressure : 100 kN/m² at distance of 3m (at least 3 minutes)

7. Protected against the effects of immersion Immersion at depth of 1m (30 minutes)

8. Protected against submersion Depth specified by manufacturer (continuous immersion in water)

IK SHOCK-RESISTANCE DEGREE

The light fixture is placed on a horizontal stable surface. A body of a certain shape and weight is dropped repeatedly from a certain height according to the IK degree to be tested.


General terminology

IK Impact EquivalentDegree Energy (J) impact

00 Unprotected -

01 0,15 Fall of a 200g body from 7.5cm of height

02 0,2 Fall of a 200g body from 10cm of height

03 0,35 Fall of a 200g body from 17.5cm of height



06 1 Fall of a 500g body from 20cm of height

07 2 Fall of a 500g body from 40cm of height

08 5 Fall of a 1,7kg body from 29.5cm of height

09 10 Fall of a 5kg body from 20cm of height

10 20 Fall of a 5kg body from 40cm of height

TECHNICAL INFORMATION

127


PHOTOMETRIC CURVE

It represents the light intensity distribution (in candles/1000 lumen) emitted by the light fixture on the planes passing through its optical axis. Two curves are indicated for each light fixture. The first one refers to the transversal C0-C180 plane (continuous line) and the second one to the longitudinal C90-C270 plane (broken line). The photometric curve defines the lighting engineering features of the fixture, such as the luminous flux control, the type of emission, the maximum intensity direction, which are needed for testing illuminance values during use.

Photometric curves shown in this catalog are only indicative. For accurate photometric data, calculations should be taken from Dialux programme.

ISOLUX DIAGRAM

It shows the illuminance distribution on the vertical plane (wall washer fixtures ) or on the horizontal plane (floor fixtures and poles). The Isolux lines link the points of equal illuminance.

LIGHT CONE

It shows the maximum illuminance level in lux, measured in horizontal parts at different heights with respect to the fixture. øC0 and øC90 represent the lengths of the section axes. In case of rotating symmetric emissions, the two values coincide. The emission angle shows the flat angle subtended by the directions where light intensity is equal to the 50% of the maximum intensity.

General terminology

LIGHTING APPLICATION

Summary of illuminance levels according to the design parameters. h= source height a= width of the light fixture positioning interval L= illuminance distance

PHOTOMETRIC DATAS

IES LM-79-08 CERTIFICATION

LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 test results.

Why should a manufacturer take the pledge?Taking the pledge to test products and register them for a LED Lighting Facts label establishes a manufacturer as an industry leader in support of high quality products for LED lighting. Accurate and consistent reporting of LED product performance will increase consumer satisfaction and accelerate market adoption.

What is the LED Lighting Facts label?Luminaire manufacturers who take the pledge agree to present the LED Lighting Facts label on product packaging or in product literature. All measurements must use results from product testing in accordance with IESNA standard LM-79-2008, Approved Method for the Electrical and Photometric Testing of Solid-State Lighting Devices. The label reports product performance results in five areas:1. Lumens2. Lumens per watt (lm/W)3. Watts at 120 VAC4. Correlated Color Temperature (CCT)5. Color Rendering Index (CRI)Additional metrics related to reliability, product consistency, construction, and other characteristics may be considered in future editions of the label.

CODE INDEX

CODE PAGE CODE PAGE CODE PAGE

CODE INDEX

1532015A 1231535015A 123L220488 87L220498 87L221188 87L221198 87L225488 87L225498 87L228088 87L228098 87L228188 87L228198 87NL7029ELK0UL 71NL7029ELW0UL 71NL7398VSK0UL 69NL7398VSW0UL 69NL7419VSK0UL 69NL7419VSW0UL 69NL19052UL 69NL30000ELK002UL 56NL30000ELK005UL 56NL30000ELW002UL 56NL30000ELW005UL 56NL30001ELK002UL 57NL30001ELK005UL 57NL30001ELW002UL 57NL30001ELW005UL 57NL31013VTK002UL 13NL31013VTK006UL 13NL50008 119NL74890 69NL75810 69NL76670 69NL76680 69NL97150UL 71NL702910K0UL 71NL702910W0UL 71NL702925K0UL 71NL702925W0UL 71NL3000010K002UL 56NL3000010K005UL 56NL3000010W002UL 56NL3000010W005UL 56NL3000039K002UL 56NL3000039K005UL 56NL3000039W002UL 56NL3000039W005UL 56NL3000110K002UL 57NL3000110K005UL 57NL3000110W002UL 57NL3000110W005UL 57NL3000139K002UL 57NL3000139K005UL 57NL3000139W002UL 57NL3000139W005UL 57NL5000410K002UL 119NL5000410W002UL 119NL5000430K002UL 119NL5000430W002UL 119NLA010005 13NLA010006 13T4002ELN08 77T4002ELW08 77

T4003ELN08 78T4003ELW08 78T4006ELN08 79T4006ELW08 79T4032ELN08 77T4032ELW08 77T4033ELN08 78T4033ELW08 78T4036ELN08 79T4036ELW08 79T4060ELN08 83T4060ELW08 83T4061ELN08 83T4061ELW08 83T4062ELN08 84T4062ELW08 84T4063ELN08 84T4063ELW08 84T4064ELN08 85T4064ELW08 85T4065ELN08 85T4065ELW08 85T4080ELN08 83T4080ELW08 83T4081ELN08 83T4081ELW08 83T4082ELN08 84T4082ELW08 84T4083ELN08 84T4083ELW08 84T4084ELN08 85T4084ELW08 85T4085ELN08 85T4085ELW08 85T4100ELN008 99T4100ELW008 99T4110ELN008 99T4110ELW008 99T4120ELN08 103T4120ELW08 103T4130ELN08 102T4130ELW08 102T4180ELN08 23T4180ELN18 23T4180ELW08 23T4180ELW18 23T4181ELN08 23T4181ELN18 23T4181ELW08 23T4181ELW18 23T4188ELN08 49T4188ELN18 49T4188ELW08 49T4188ELW18 49T4189ELN08 48T4189ELN18 48T4189ELW08 48T4189ELW18 48T4190NLN08 73T4190NLN18 73T4190NLW08 73T4190NLW18 73T4201NLN08 41

T4201NLN18 41T4201NLW08 41T4201NLW18 41T4211NLN08 44T4211NLN18 44T4211NLW08 44T4211NLW18 44T41911NN08 15T41911NN18 15T41911NW08 15T41911NW18 15T41922NN08 15T41922NN18 15T41922NW08 15T41922NW18 15T41931LN08 17T41931LN18 17T41931LW08 17T41931LW18 17T41941NN08 15T41941NN18 15T41941NW08 15T41941NW18 15T41952NN08 15T41952NN18 15T41952NW08 15T41952NW18 15T41961LN08 17T41961LN18 17T41961LW08 17T41961LW18 17T42004LN08 43T42004LN18 43T42004LW08 43T42004LW18 43T42004NN08 43T42004NN18 43T42004NW08 43T42004NW18 43T42012LN08 43T42012LN18 43T42012LW08 43T42012LW18 43T42012NN08 41T42012NN18 41T42012NW08 41T42012NW18 41T42021LN08 41T42021LN18 41T42021LW08 41T42021LW18 41T42021NN08 41T42021NN18 41T42021NW08 41T42021NW18 41T42104LN08 45T42104LN18 45T42104LW08 45T42104LW18 45T42104NN08 45T42104NN18 45T42104NW08 45T42104NW18 45

128

ARTEMIDE OUTDOOR 2013Code Index


T42112LN08 45T42112LN18 45T42112LW08 45T42112LW18 45T42112NN08 44T42112NN18 44T42112NW08 44T42112NW18 44T42121LN08 44T42121LN18 44T42121LW08 44T42121LW18 44T42121NN08 44T42121NN18 44T42121NW08 44T42121NW18 44T051308 60T051338 60, 61T051398 60, 61T051408 60T051438 60, 61T051498 60, 61T081008 33T081018 33T081108 35T081118 35T081208 33T081218 33T081308 33T081318 33T081408 35T081418 35T082008 29T082018 29T082108 27T082118 27T082208 27T082218 27T082308 27T082318 27T082408 27T082418 27T082908 37T082918 37T083608 92T083618 92T083708 92T083718 92T083808 93T083818 93T083908 93T083918 93T085008 67T085108 67T085308 53T085708 65T085808 65T087308 113T087408 113T087508 115T087808 115T271638 108T271698 108

T272038 111T272098 111T272138 111T272198 111T273138 111T273198 111T276438 108T276498 108T276538 109T276598 109T277238 108T277298 108T277338 109T277398 109T277638 107T277698 107T277738 107T277798 107T277838 108T277898 108T277938 109T277998 109T278238 111T278298 111T278338 111T278398 111T287638 107T287698 107T287738 107T287798 107T287838 108T287898 108T288038 109T288098 109T288238 111T288298 111T288338 111T288398 111T400210N08 77T400210W08 77T400239N08 77T400239W08 77T400310N08 78T400310W08 78T400339N08 78T400339W08 78T400610N08 79T400610W08 79T400639N08 79T400639W08 79T403210N08 77T403210W08 77T403239N08 77T403239W08 77T403310N08 78T403310W08 78T403339N08 78T403339W08 78T403610N08 79T403610W08 79T403639N08 79T403639W08 79T406010N08 83

T406010W08 83T406039N08 83T406039W08 83T406110N08 83T406110W08 83T406139N08 83T406139W08 83T406210N08 84T406210W08 84T406239N08 84T406239W08 84T406310N08 84T406310W08 84T406339N08 84T406339W08 84T406410N08 85T406410W08 85T406439N08 85T406439W08 85T406510N08 85T406510W08 85T406539N08 85T406539W08 85T408010N08 83T408010W08 83T408039N08 83T408039W08 83T408110N08 83T408110W08 83T408139N08 83T408139W08 83T408210N08 84T408210W08 84T408239N08 84T408239W08 84T408310N08 84T408310W08 84T408339N08 84T408339W08 84T408410N08 85T408410W08 85T408439N08 85T408439W08 85T408510N08 85T408510W08 85T408539N08 85T408539W08 85T409905 79T409906 79T409907 78T409908 77T409913 99T409914 99T409919 102T409920 103T410010N008 99T410010W008 99T410039N008 99T410039W008 99T411010N008 99T411010W008 99T411039N008 99T411039W008 99

129



T412010N08 103T412010W08 103T412039N08 103T412039W08 103T413010N08 102T413010W08 102T413039N08 102T413039W08 102T418010N08 23T418010N18 23T418010W08 23T418010W18 23T418039N08 23T418039N18 23T418039W08 23

T418039W18 23T418110N08 23T418110N18 23T418110W08 23T418110W18 23T418139N08 23T418139N18 23T418139W08 23T418139W18 23T418810N08 49T418810N18 49T418810W08 49T418810W18 49T418839N08 49T418839N18 49

T418839W08 49T418839W18 49T418910N08 48T418910N18 48T418910W08 48T418910W18 48T418939N08 48T418939N18 48T418939W08 48T418939W18 48

130


NORTH AMERICAUNITED STATES HEADQUARTERSArtemide, Inc. • 250 Karin Lane, Hicksville, NY 11801T. 631-694-9292 • Toll Free 1-877-Art-9111 • email: [email protected] artemide.net

ARTEMIDE SHOWROOMS

ARTEMIDE SALES OFFICE

CHICAGO351 W Hubbard Street, #100Chicago, IL 60654T. [email protected]

LOS ANGELES9006 Beverly BoulevardWest Hollywood, CA 90048T. [email protected]

MIAMI2222 Ponce de Leon Boulevard, #100Coral Gables, FL 33134T. [email protected]

PHILADELPHIAT. [email protected]

DALLAST. [email protected]

SAN FRANCISCOT. [email protected]

CANADA HEAD OFFICE / BUREAU CHEFArtemide Canada Ltée/Ltd. • 11105, rue Renaude Lapointe, Montréal, Québec H1J 2T4T. 514-323-6537 • Toll Free 1-888-777-2783 • email: [email protected] artemide.net

MONTREAL440, rue Saint-PierreMontréal, Québec H2Y 2M5T. [email protected]

TORONTO5 Mill StreetToronto, Ontario M5A 3R6T. [email protected]

ARTEMIDE SHOWROOMS / SALLES DE MONTRE ARTEMIDE

MEXICOScultura Luminosa, Sudermann #246, Col. Chapultepec Morales, Mexico D.F., 11570 T. +52-55-5250-2661 / +52-55-4633-2744 • email : [email protected] artemide.mx

MEXICOScultura LuminosaSuderman #246, Col. Chapultepec MoralesMexico D.F. 11570T. +52-55-5250-2661F. [email protected]

NEW YORK46 Greene StreetNew York, NY 10013T. [email protected]

Graphic design :Studio Cerri & AssociattiPierlugi CerriAlessandro ColomboRoberto LibanoriChristophe FSM

Photos :Beppe RasoLuigi RinaldelliMiro ZagnoliDavid ZanardiFederico Villa

Rendering :Alberto MassimauriAlessandro MassimauriFrancesco DazzaraAlessandro Peccati

Print :Solisco

© Artemide - Mars 2014

Artemide reserves the right to change, at any time and without prior warning,the technical specifications of any product illustrated in this catalog.

www.artemide.net

Documents

2014 outdoor catalog