2014 Grizzly Spring Catalog Web

PURVEYORS OF FINE MACHINERY®—SINCE 1983STARTS MARCH 31ST ENDS JULY 31ST, 2014

SPRING /SUMMER SALE

• Motor: 1⁄4 HP, 120V • 110 RPM wheel speed• 220 grit grinding wheel is specially made for wet

grinding • Grinding wheel measures 250mm diameter x 50mm wide x 12mm bore • Water bath keeps tools cool while sharpening

• Leather stropping wheel size: 200mm diameter x 30mm wide

• Includes a sharpening jig (T20880), angle guide, and polishing/honing paste

• Approximate shipping weight: 42 lbs.

• Motor: 1⁄2 HP, 120V, 60Hz, 3.5A• 58 oscillations per minute• 2000 RPM (1⁄2" spindle)Includes:• 5 rubber sanding drums: 3⁄4", 1",

11⁄2", 2", and 3"• 6 sanding sleeves: 1⁄2", 3⁄4",

1", 11⁄2", 2", and 3"• 6 table inserts: 1⁄2", 3⁄4", 1",

11⁄2", 2", and 3"• 3 spindle washers: 5⁄8", 7⁄8",

and 13⁄4"• Wrench

• 120V, 5.2 Amps• Double insulated motor• 10,500 RPM no-load speed• 5⁄8" arbor• Weighs 4.3 lbs.

• Motor: 120V, 9A, 1.1 kW• Motor speed: 5500 RPM• Blade rim speed: 9070 ft per minute• Max cutting depth at 90°: without rail 25⁄32", with rail 131⁄32"• Max cutting depth at 45°: without rail 15⁄8", with rail 17⁄16"• Saw blade: 160mm x 20mm x 48

tooth• Distance between saw

blade and wall: 5⁄8"• Dust port diameter:

11⁄2"• Weighs 11 lbs.

10" WET GRINDER KIT - ANNIVERSARY EDITION

OSCILLATING SPINDLE SANDER

TRACK SAW

14" 1 HP BANDSAW,POLAR BEAR SERIES®

DECK JIGSONICRAFTER 2.5 AMP W/HYPERLOCK

13⁄4 HP ROUTER690LR

4" ANGLE GRINDER

78" MAPLE WORKBENCH• 23⁄4" edge thickness • Overall size: 78"W x 25"D x 38"H• Two small drawers measure 161⁄4"W x 131⁄4"D x 31⁄4"H• Two middle drawers measure 161⁄4"W x 131⁄4"D x 43⁄4"H• Two large drawers measure 161⁄4"W x 131⁄4"D x 51⁄2"H• All drawers are felt lined• 121⁄2" x 23⁄4" end vise• Approximate shipping weight: 203 lbs.

• 11 amp, 13⁄4 HP fixed base router• One-handed lever-release height adjustment; 1⁄64"

micrometer depth-of-cut adjustment• Precision-machined aluminum motor housing and

base; 100 percent sealed ball bearing construction

• Includes router, 1⁄4" collet and 1⁄2" collet

• Weighs 8 lbs.

Rockwell's unique Universal Fit System allows other accessories to fit on the newly designed Sonicrafter. The Universal Fit accessory interface and flange secure any blade in place and the Hyperlock provides one ton of secure clamping force. 2.5 amp, variable speed for precision control, this is an ultra-versatile tool for cutting, sawing, scraping, sanding, and more!

With the Kreg Deck Jig and a few simple tools you can create a beautiful and functional deck surface, completely free of exposed fasteners. The Kreg Deck Jig utilizes an incredibly strong wood-to-wood bond. Specialized self-tapping screws are driven at a precise angle into the edge of your deck boards so they stay hidden from view. Works with a wide variety of decking materials including composite.

• Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, 11A/5.5A

• Precision-ground cast iron table size: 14" x 14"

• Table tilt: 45° right, 15° left• Floor to table height: 435⁄16"• Deluxe extruded aluminum fence• Cutting capacity/throat: 131⁄2"• Maximum cutting height: 6"• Blade size: 921⁄2" to 931⁄2"• Blade speeds: 1500 & 3200 FPM• 4" dust port• Overall size: 263⁄8"W x 661⁄2"H x 301⁄4"D• Approximate shipping weight: 196 lbs.

252923

226766

FREE!REPLACEMENT DRILL BIT & DRIVER BIT

T10010ANV $199.95 SALE $15995 T10687 $199.95 SALE $17995 T10493 $45.00 SALE $3495

G0739 $149.95 SALE $11195 G0555P $545.00 SALE $52500 H7721 $625.00 SALE $55000

T26369 ONLY $11995 T23000 ONLY $7995 T22091 $149.95 SALE $11995

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

21-800-523-4777

FREE760 PAGE

2014 CATALOGSPECIALSSPOKESHAVE

TILE SAW

DOUBLE BEVEL SLIDING COMPOUND MITER SAW DWS780

SOPRANO UKULELE KIT - KOA

FORSTNER BIT 16-PC. SET

KREG TOOLBOXX MASTER COLLECTION

18 GAUGE 1⁄4" CROWN STAPLER

HEIRLOOM GUITAR KIT #1 CURLY MAPLE

GLASS/GRANITE DRILLING SET, 12-PC.

HEAVY-DUTY ANTI-FATIGUE MAT 3' X 5'

NURSERY DOUBLE CART

HEIRLOOM CURLY MAPLE GUITAR KIT

• 15A motor • 3800 RPM motor• Integrated XPS positioning system• Tall sliding fences support nested crown molding up to

71⁄2" and vertical base molding up to 61⁄2"• Miters 60° R & 50° L• Dual horizontal steel rails and linear ball bearings• Cuts up to 2"x16" dimensional lumber at 90° and 2"x12"

lumber at 45°• Includes carbide blade,

wrench, dust bag, and vertical clamp

• Shoots 1⁄2"–1", 18-gauge 1⁄4" crown staples• 360° Adjustable exhaust• Adjustable depth setting• Rubberized hand grip• Quick-loading magazine• Safety trigger• Includes oil bottle and

hex wrenches

Distribute up to 350 lbs. of payload between two high capacity steel grate shelves. Large 10" x 31⁄2" pneumatic lug wheels roll easily over a wide variety of surfaces. Includes a pivoting steel tube steering handle. 38" L x 20" W x 32" H. Approximate shipping weight 68 lbs.

Features solid koa body and neck and solid rosewood finger board. All parts are included. Requires advanced skills to assemble and finish.

This kit comes complete with:• High quality Alnico pickups • Grizzly tuning machines• Strings• All the

necessary hardware and detailed instructions

This kit comes complete with:• Top quality Humbucker bridge and neck pickups • Grizzly

tuning machines

• Adjustable Bridge

• Strings• All the

necessary hardware and detailed instructions

Heavy cast iron body, high carbon heat treated steel blade and precision adjustment knobs make this Spokeshave a pleasure to use. Straight sole for shaping flat surfaces or convex sole for shaping contoured surfaces.

Forstner Bits are the most accurate and versatile of all wood bits. They cut extremely smooth and clean flat-bottomed holes in any species of wood, even thin stock or veneers. Includes: 1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", round-shank bits, and 1", 11⁄8", 11⁄4", 13⁄8", 11⁄2", 15⁄8", 13⁄4", 17⁄8", 2", 21⁄8" saw-toothed hex-shank bits. Shank size is 3⁄8". Comes with a nice wood storage box.

• Ideal for glass mirror, granite tile and granite countertop installations • Powerful dual suction cups ensure drill guide remains stationary

• Adjustable guide for different bit sizes• Diamond-core drill bits• Bit sizes: 3⁄16", 1⁄4", 5⁄16", 3⁄8",

1⁄2", 3⁄4", 7⁄8", 1", 11⁄8", 11⁄4", and 13⁄8"

This high-quality wet-cutting Tile Saw is the perfect addition for the professional tile-setter or the ambitious homeowner. Motor is 21⁄2 HP, 110V, 15A, 3450 RPM. Saw features belt driven 5⁄8" arbor, 18" ripping capacity, 12" diagonal cutting capacity, 33⁄4" cutting depth, 163⁄8" x 111⁄8" table size, 45º compound cutting attachment, sliding table, durable PVC tray, high volume water pump, folding stand with casters for easy portability. H4993 Blade sold separately. 107 lbs. net weight.

For customers that want all things Kreg Joinery and a handy place to store it, the Kreg Toolboxx Master Collection gives them everything they want. Kreg Toolboxx Master Collection includes the following: K3 Kreg Jig; Face Clamp; Portable Base; Dust Collection; Kreg Jig Support Stop;

Kreg Jig Mini; Kreg Jig HD; Kreg Jig HD Screws - 30 ct; Micro-Pocket Drill Guide; Right Angle Clamp;

Screw Selector Wheel; Trim Carpentry DVD; and over

1000 Kreg Screws.

Don't let weary legs and feet limit your shop time. This Heavy-Duty Anti-Fatigue Mat features beveled edges and a no-slip tread for safety and comfort. Open hole design allows liquids to drain through, so it's perfect for wet or oily conditions. Measures 3' wide x 5' long x 3⁄8" thick. Buy one for every machine workstation!

D3573 $39.95 SALE $3495

H3390 $395.00 SALE $29995

T22566 ONLY $59995

T10458 $219.95 SALE $18995

ConvexH8065 $17.50 SALE $1495

T25400 $299.99 SALE $21995

T26416 $44.95 SALE $3995

H6082 $419.95 SALE $37995

StraightH8064 $17.75 SALE $1525

T10538 $89.95 SALE $5995

T10456 $49.70 SALE $2995

T24064 $99.95 SALE $8995

H8069 $299.95 SALE $27500

$79$79shipping

lower 48 states

$1000

FREE!T22432

A $19995 VALUE!

3 grizzly.com®OVER 15,000 PRODUCTS ONLINE!

Free Brokerage Rates on Machinery Orders to Canada!

Please visit grizzly.com® for details SPECIALS

Air pumps at 175 maximum PSI and 4.5 gallon tanks feature ample capacity for most jobs. Compact design makes it easy to use and transport, and twin universal quick couplers offer easy hook-ups. Maintenance free air compressor pump takes a beating and keeps on going. Ideal for use with all nailers and staplers and comes with a 3-year limited warranty through the manufacturer.

The pen-size Model 500 is superbly functional in design and comes complete with six interchangeable driver tips. It features the exclusive 100+ RPM Super Micro-Torque drive motor, forward and reverse controls, and a 1⁄8" chuck that allows for effortless swapping between Slotted, Phillips and Torx bits. An ergonomic handle design provides multiple grip positions to accommodate a variety of working situations.

Great for cutting firewood and hammering tent stakes, this camp axe features a non-slip rubber grip, wrist lanyard, tempered one piece construction and an injection molded nylon blade sheath. Weighs 14.5 oz. 107⁄8" overall length.Perfect for the strict size & weight requirements of backpackers, this brush saw features a feather-light ABS handle, 61⁄4" SK5 steel blade with a double row of teeth, soft rubber grip and a rock solid locking mechanism. 77⁄8" closed. 131⁄2" overall.

The most portable self-contained welding and cutting set. Oxygen and acetylene gases provide a power to weld, braze or cut a variety of metals with no electricity required. Welds to 3⁄16" and cuts up to 1⁄2". Larger tips will increase welding and cutting sizes. Made with heavy-duty brass and steel construction. Kit includes 20 cubic foot oxygen tank, 10 cubic foot acetylene tank, regulators, torch handle with check valves, cutting attachment, one welding tip, acetylene tank valve key, double line Dayco hose, portable tote, flint striker, and goggles.

This go-anywhere Mini Grinder is packed in its own foam lined hard case. The two speed 7.2 volt cordless grinder kit includes two batteries, battery charger with LED gooseneck work light, transformer, and a wide selection of grinding stones, sanding discs, and drums and polishing buffs.

Tote all your small gardening tools and supplies around with this handy high impact plastic Garden Tool Box. Features large built-in 53⁄4" diameter wheels, two side pockets and the reinforced top also make it a mobile seat for planting, pruning and weeding. The Garden Tool Box measures 16" L x 8" W x 103⁄4" H. Load capacity 176 lbs.

• Measure relative bevel• US made sensor, absolute sea level traceable• Tangent tilt rate % shows tilt angle in % reading• Standard 9V battery for 250+hours of use• Accuracy: 0.2º• Resolution: 0.05º

• Motor: 3 HP Baldor®, 230V, single-phase, 15 amps, 1725 RPM, explosion proof

• Filter system: 3-stage, 30–10–5 microns

• Air capacity: 1900 CFM• Outlet size: 12"• Impeller: Aluminum• Number of filters: 18• Working area: 51"W x 51"H x 22"D• Overall size: 63"W x 100"H x 52"D• Approx. shipping weight: 543 lbs.

• 5⁄8 HP motor, 440W• 2.1 Amps• No-load speed: 30,000 RPM• Carbon brushes for long life• 1⁄4" Collet• Low noise and vibration• Weighs 4.04 lbs.

• Heavy duty 120 volt induction motor

• Reliable AR dual axial pump• ETL approved to UL and

CSA Standards• Portable steel cart with

pneumatic wheels• Perfect for indoor and

outdoor use

• 2000 PSI, 1.5 GPM• Heavy-duty 120V induction

motor• Professional CAT 2DX pump• ETL approved to UL & CSA

standards• Includes 25' hose and 35'

power cord• Ideal for indoor use where

gas is not feasible• Weighs 86 lbs.

GARDEN TOOL BOX

CAMP AXE/SAW COMBO

3 HP DRY SPRAY BOOTH

1900 PSI ELECTRICPRESSURE WASHER

4.5 GALLON OIL FREE COMPRESSOR

ULTRATECH POWER PRECISION SCREWDRIVER

2 HP DRY SPRAY BOOTH

TRIM ROUTER, METAL BODY

ANGLECUBE 2" DIGITAL LEVEL / BEVEL

OXY-ACETYLENE TORCH KIT

7.2V MINI GRINDER KIT W/ CASE

2000 PSI ELECTRICPRESSURE WASHER

• Motor: 2 HP Baldor®, 115V/230V, single-phase, 22A/11A, 1725 RPM, explosion proof, UL listed

• Filter system: 3-stage, 30–10–5 microns

• Air capacity: 1220 CFM• Outlet size: 10"• Impeller: 101⁄2" aluminum• Working area: 34"W x 42"H x

19"D• Overall size: 48"W x 77"H x 68"D

Approx. shipping weight: 341 lbs.

MADE IN TAIWAN MADE IN TAIWAN

T26439 $349.95 SALE $27500

T24524 $26.95 SALE $1895

G0532 $2750.00 SALE $189500

H7790 $59.95 SALE $4295

H5668 $19.95 SALE $1295

H7135 $29.00 SALE $1995

G0533 $3295.00 SALE $259500

T24159 $799.95 SALE $67500

T21562 $30.00 SALE $1895

H7481 $375.00 SALE $34500

H8124 $29.95 SALE $2295

T24160 $999.95 SALE $79500

$49$49shipping

lower 48 states

$150$150shipping

lower 48 states

$99$99shipping

lower 48 states

$49$49shipping

lower 48 states

$49$49shipping

lower 48 states

41-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

TABLE SAWS

*To maintain machine warranty, 440V operation requires additional conversion time and a $250 fee. Please contact technical service for complete information before ordering.

10" HYBRID TABLE SAWWITH RIVING KNIFE

10" CONTRACTOR STYLE TABLE SAWWITH RIVING KNIFE

• Motor: 2 HP, 110V/220V, 16A/8A, single-phase, prewired to 220V

• Precision-ground cast iron table with extension measures: 27" x 40"

• Table height: 34" • Arbor: 5⁄8"• Arbor speed: 3850 RPM• Capacity @ 90º: 31⁄8", @ 45º: 23⁄16"• Rip capacity: 30" right, 12" left• Approx. shipping weight: 416 lbs.

• Motor: 11⁄2 HP, 110V/220V, 11.5A/5.7A, single-phase, prewired to 110V

• Precision-ground cast iron table with extension measures: 251⁄4" x 40"

• Table height: 361⁄2" • Arbor: 5⁄8"• Arbor speed: 4000 RPM• Capacity @ 90º: 31⁄8", @ 45º: 21⁄4"• Rip capacity: 30" right, 12" left• Approx. shipping weight: 208 lbs.

• Motor: 3 HP, 240V, single-phase, 3450 RPM

• Solid cast iron table with extension measures: 27" x 40" • Arbor: 5⁄8"

• Maximum depth of cut @ 90°: 3"• Maximum depth of cut @ 45°: 21⁄8"• Max. dado width: 13⁄16"• Cutting capacity: 8" L, 255⁄8" R of blade• Base dimension: 201⁄2" x 201⁄2"• Approx. shipping weight: 509 lbs.

• Motor: 3 HP, 220V, 12.8A, single-phase

• Precision-ground cast iron table with extension measures: 27" x 40"

• Table height: 34" • Arbor: 5⁄8" • Arbor speed: 4300 RPM• Max. dado width: 13⁄16"• Capacity @ 90º: 31⁄8", @ 45º: 23⁄16"• Max. rip capacity: 291⁄2"• Approx. shipping weight: 530 lbs.

• Motor: 3 HP, 220V, 12.8A, single-phase• Precision-ground cast iron table with

extension measures: 27" x 743⁄4"• Table height: 34" • Arbor: 5⁄8" • Arbor speed: 4300 RPM• Max. dado width: 13⁄16"• Capacity @ 90º: 31⁄8", @ 45º: 23⁄16"• Max. rip capacity: 50"• Approx. shipping weight: 557 lbs.

10" LEFT-TILTING SUPER HEAVY-DUTY TABLE SAW WITH RIVING KNIFE

10" CABINET TABLE SAW WITH RIVING KNIFE

• Motor: 5 HP, 220V/440V*, 12A/6A, 3-phase

• Precision-ground cast iron table with extension measures: 27" x 753⁄4"

• Table height: 347⁄8" • Arbor: 5⁄8" • Arbor speed: 4000 RPM• Max. dado width: 3⁄4"• Capacity @ 90º: 33⁄16", @ 45º: 23⁄16"• Max. rip capacity: 52"• Approx. shipping weight: 716 lbs.

10" HEAVY-DUTY CABINET TABLE SAWWITH RIVING KNIFE

10" CABINET TABLE SAWWITH RIVING KNIFE & EXTENSION RAILS

177335

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

232857

232857

232857

175370

W

OOD MAGAZINE

W

OOD MAGAZINE

A P P R O V E DA P P R O V E D

175370

FREE!10" CARBIDE-

TIPPED BLADE

FREE!10" CARBIDE-

TIPPED BLADE

FREE!10" CARBIDE-

TIPPED BLADE

FREE!10" CARBIDE-

TIPPED BLADE

INCLUDES A 3 HP LEESON® MOTOR

INCLUDES A 3 HP LEESON® MOTOR

BEAUTIFUL WHITE COLOR

• Main motor: 61⁄2 HP, 220V, 3-phase• Scoring blade motor: 1 HP, 220V, single phase• Main blade arbor: 30mm • Main blade speed: 4000 RPM• Main blade tilt: 0–45° • Depth of cut: 41⁄4" @ 90°, 3" @ 45°• Scoring blade size: 43⁄4" (120mm) • Scoring blade arbor: 20mm• Scoring blade tilt:

0–45°• Sliding table size:

121⁄4" x 126"• Max. rip capacity: 52"• Length of cross cut: 124"• Approx. shipping weight:

1552 lbs.

12" SLIDING TABLE SAW

MADE IN GERMANY COMPACT

FOOTPRINTALSO CUTSDADOES!

RIVING KNIFE &SCORING BLADE

(BLADES NOT INCLUDED)

10" SLIDING TABLE SAW W/SCORING BLADE ARBOR• Motor: 5 HP, 220V, single-phase• Main table dimensions: 143⁄4" x 27"• Sliding table size: 121⁄4" x 393⁄4"• Main blade arbor: 5⁄8"• Blade tilt: 0-45˚• Main blade arbor speed: 4000 RPM• Depth of cut: 31⁄8" @ 90˚, 21⁄4" @ 45˚• Scoring blade size: 31⁄8" (80mm)• Scoring blade arbor: 22mm• Scoring blade arbor speed: 8000 RPM• Max. dado width: 13⁄16"• Max. rip capacity: 34"• Length of cross cut: 271⁄2"• Approx. shipping weight: 572 lbs.

2010

G0732 $795.00 SALE $65000

G0652 $2150.00 SALE $209500

Heavy-Duty SHOP FOX® Mobile BaseD2057A $69.95 SALE $5995

G0690 $1425.00 SALE $137500

G0674 $7995.00 SALE $699500 G0700 $2695.00 SALE $249500

G1023RL $1295.00 SALE $119500



G0715P ONLY $79500


$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

$150$150shipping

lower 48 states

$150$150shipping

lower 48 states

$255$255shipping

lower 48 states

$150$150shipping

lower 48 states

G0691 $1595.00 SALE $152500


$150$150shipping

lower 48 states


Please visit grizzly.com® for details

5 grizzly.com®Order at grizzly.com® • By Fax: 1-800-438-5901Customer Service: 1-570-546-9663

JOINTERS

• Motor: 3 HP, 240V, single-phase, TEFC, 3450 RPM, 9A

• Maximum depth of cut: 1⁄8"• Maximum rabbeting capacity: 1⁄2"• Precision-ground cast iron table size:

9" x 721⁄2"• Cutterhead diameter: 3"• Cutterhead speed: 4800• Cutterhead knives: 4 HSS; 8" x 3⁄4" x 1⁄8"• Cuts per minute: 20,000• Deluxe cast iron fence size: 35" L x 5" H• Approximate shipping weight: 522 lbs.

8" JOINTER

6" JOINTER

6" JOINTER

6" BENCHTOP JOINTER WITH BUILT-IN DUST COLLECTION• Motor: 1 HP, 120V, single-phase, 13A• Maximum stock width: 6"• Maximum depth of cut: 1⁄8"• Maximum rabbeting capacity: 1⁄2"• Table size: 71⁄2" x 46"• Cutterhead diameter: 21⁄2"• Cutterhead speed: 4800 RPM• Number of knives: 3• Knife size: 6" x 5⁄8" x 1⁄8"• Cuts per minute: 14,400• Fence adjustment: positive stops @ ± 45º & 90º• Approximate shipping weight: 266 lbs.


BUILT-IN MOBILE BASE!

FREE!PAIR OF SAFETY PUSH BLOCKS



FREE!PAIR OF SAFETY PUSH

BLOCKS

• Motor: 3 HP, 220V, single-phase, TEFC capacitor start induction, 16A• Maximum depth of cut: 5⁄16"• Maximum width of cut: 1113⁄16"• Precision-ground cast iron table size: 121⁄2" x 80"• Cutterhead diameter: 4"• Cutterhead speed: 5900 RPM• Cutterhead knives 4 HSS, 12" x

13⁄16" x 1⁄8" (G9860); 84 inserts (G9860ZX)

• Cuts per minute (G9860): 23,600; (G9860ZX) 35,400


• Motor: 5 HP, 220V, single-phase, 25A• Maximum depth of cut: 5⁄16"• Maximum width of cut: 16"• Table size: 161⁄4" x 991⁄4"• Cutterhead diameter: 4"• Cutterhead speed: 5000 RPM• Cutterhead knives: 4 HSS• Knife size: 16" x 11⁄8" x 1⁄8"• Cuts per minute: 20,000• Fence size: 431⁄4" x 65⁄8"• Approximate shipping weight: 1742 lbs.

THE ULTIMATE 12" JOINTERS THE ULTIMATE 16" JOINTERWITH 4 KNIFE CUTTERHEAD


FREE!PAIR OF

SAFETY PUSH BLOCKS

MADE IN AN ISO 9001 RATED FACTORY MADE IN AN ISO 9001 RATED FACTORY

FREE!W1228

JOINTER PAL® KNIFE SETTING JIG

• Motor: 11⁄2 HP, 110V, single-phase• Cast iron table• Table size: 281⁄2" x 61⁄4"• Fence size: 227⁄8" x 45⁄16"• Cutterhead knives: 2• Cutterhead speed: 10,000 RPM• Maximum depth of cut: 1⁄8"• Cuts per minute: 20,000• Infeed table adjustment knob• 45° and 90° fence stops• Approximate shipping weight: 80

lbs.

208624

208624

208624

• Motor: 1 HP, 120V, single-phase, 13A • Maximum stock width: 6" • Maximum depth of cut: 1⁄8"• Maximum rabbeting capacity: 1⁄2"• Table size: 71⁄2" x 46"• Cutterhead diameter: 21⁄2"• Cutterhead speed: 4800 RPM• Number of knives: 3• Knife size: 6" x 5⁄8" x 1⁄8"• Cuts per minute: 14,400• Fence adjustment stops at ± 45° & 90°• Approximate shipping weight: 268 lbs.• CSA certified versions of this machine may be in stock. Call

for availability

• Motor: 3 HP, 240V, single-phase, TEFC, 3450 RPM• Maximum depth of cut: 1⁄8"• Maximum rabbeting capacity: 1⁄2"• Table size: 8" x 763⁄8"• Infeed table size: 8" x 433⁄8"• Cutterhead diameter:

33⁄16" (G0490), 33⁄8" (G0490X)• Cutterhead speed: 4800 RPM• Cutterhead knives: 4 HSS, 8" x 3⁄4" x

1⁄8" (G0490); 40 inserts (G0490X)• Cuts per minute: 21,400• Approximate shipping weight: 562 lbs.

• Motor: 21⁄2 HP, 220V, single-phase, TEFC, 3400 RPM, 9.9A• Maximum depth of cut: 1⁄8" (jointer), 3⁄16" (planer)• Maximum width of cut:

101⁄4" (jointer), 93⁄4" (planer)• Maximum planer cutting height: 81⁄4"• Jointer table size: 121⁄2" x 4015⁄16"• Planer table size: 93⁄4" x 231⁄8"• Cutterhead diameter: 29⁄32"• Cutterhead speed: 6500 RPM• Cutterhead knives: 2 HSS• Knife size: 101⁄4" x 11⁄16" x 1⁄8"• Cuts per minute: 13,000• Planer feed rate: 16 FPM• Approximate shipping weight: 378 lbs.

8" x 76" JOINTERS 10" JOINTER/PLANER


BLOCKS



BLOCKS

MADE IN TAIWAN

$150$150shipping

lower 48 states

$79$79shipping

lower 48 states

G0452P $525.00 SALE $49500

G0656 $845.00 SALE $79500

G0725 $245.00 SALE $22500

G0452 $550.00 SALE $52500

$79$79shipping

lower 48 states

$49$49shipping

lower 48 states

G0675 $1195.00 SALE $115000$99$99

shippinglower 48 states

$150$150shipping

lower 48 states

$255$255shipping

lower 48 states

$255$255shipping

lower 48 statesG9953 $4595.00 SALE $449500G9860 4 Knife Cutterhead $3550.00 SALE $339500

G9860ZX Spiral Cutterhead $5195.00 SALE $475000

G0490 4-Knife Cutterhead $995.00 SALE $95000

G0490X Spiral Cutterhead $1325.00 SALE $127500

61-800-523-4777

FREE760 PAGE

2014 CATALOGBANDSAWS

• Motor: 11⁄2 HP, 110V/220V, single-phase, 1725 RPM, 15A/7.5A, prewired 110V

• Table size: 201⁄2" x 14" x 11⁄2"• Table tilt: 45° right, 15° left• Floor to table height: 44"• Includes deluxe extruded aluminum resaw fence and miter gauge• Cutting capacity/throat: 131⁄2"• Maximum cutting height: 6"• Blade size: 921⁄2" to 931⁄2" (1⁄8" to 3⁄4" wide)• Precision-ground cast iron table• Computer-balanced cast iron wheels with rubber tires• Overall size: 26" W x 671⁄4" H x 30" D• Approximate shipping weight: 259 lbs.

THE ULTIMATE 14" BANDSAW 14" HEAVY-DUTY BANDSAW

MADE IN AN ISO 9001 RATED FACTORY

17" HEAVY-DUTY BANDSAW WITH CAST IRON WHEELS

21" SUPER HEAVY-DUTY BANDSAW WITH TILTING GEARED TABLE AND MOTOR BRAKE

24" INDUSTRIAL BANDSAW WITH TILTING GEARED TABLE

• Motor: 1 HP, 110V/220V, prewired 110V single-phase, TEFC, 1725 RPM, 11A/5.5A

• Precision-ground cast iron table size: 14" x 14"• Table tilt: 45° right, 10° left• Floor to table height: 43"• Deluxe extruded aluminum fence• Cutting capacity/throat: 131⁄2"• Maximum cutting height: 6"• Blade size: 921⁄2" to 931⁄2" (1⁄8" to 3⁄4" wide)• Blade speeds: 1800 & 3100 FPM • 4" dust port• Overall size: 27" W x 67" H x 30" D• Approximate shipping weight: 247 lbs.

• Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, prewired to 220V, 60 Hz

• Power transfer: Belt drive• Precision-ground cast iron table size:

235⁄8" x 171⁄4" x 11⁄2" thick• Table tilt: 45° right, 5° left• Floor to table height: 371⁄2"• Cutting capacity/throat: 161⁄4" left of blade• Maximum cutting height: 12"• Blade size: 1311⁄2" long• Blade sizes available: 1⁄8"–1" wide• 2 blade speeds: 1700 & 3500 FPM• Approximate shipping weight: 418 lbs.



MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

17" HEAVY-DUTY BANDSAW

19" HEAVY-DUTY BANDSAW 19" HEAVY-DUTY BANDSAW WITH MOTOR BRAKE

• Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, prewired 220V, 1725 RPM, 60 Hz

• Amps: 20A/10A• Power transfer: Belt drive• Precision-ground cast iron table size: 17" x 17" x 11⁄2" thick• Table tilt: 45° right , 10° left• Floor to table height: 371⁄2"• Cutting capacity/throat: 161⁄4" left of blade• Maximum cutting height: 121⁄8"• Blade size: 1311⁄2" long• Blade sizes available: 1⁄8"–1" wide• 2 blade speeds: 1700 & 3500 FPM• Approximate shipping weight: 342 lbs.

MADE IN TAIWAN

WOOD MAGAZINE

WOOD MAGAZINE

A P P R O V E DA P P R O V E D

177335

252923

252923252923

• Motor: 3 HP, 220V/440V*, 3-phase, TEFC, 60 Hz, 1725 RPM

• Precision-ground cast iron table size: 263⁄4" x 19" x 11⁄2" thick

• Floor to table height: 371⁄2"• Cutting capacity/throat: 181⁄4"• Maximum cutting height: 12"• Blade size: 143" long• Blade sizes available: 1⁄8"–11⁄4"• 2 Blade speeds: 1700, 3500 FPM• Fully balanced cast iron wheels & polyurethane tires• Overall size: 36" W x 76" H x 32" D• Approximate shipping weight: 512 lbs.

• Motor: 3 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz, 1725 RPM

• Precision-ground cast iron table size: 263⁄4" x 19" x 11⁄2" thick

• Floor to table height: 371⁄2"• Cutting capacity/throat: 181⁄4"• Maximum cutting height: 12"• Blade size: 143" long• Blade sizes available: 1⁄8"–11⁄4"• 2 Blade speeds: 1700 & 3500 FPM• Overall size: 36" W x 76" H x 32" D• Approximate shipping weight: 460 lbs.







• Motor: 3 HP, 230V, single-phase, 16A• Throat capacity: 20" • Height capacity: 141⁄4"• Table size: 291⁄2" x 203⁄4" x 17⁄8" thick• Table tilt: 5° left, 45° right• Standard blade length: 165"• Blade size range: 1⁄4"–13⁄8"• Blade speed: 4600 FPM• Quick-change blade release/tensioner• Micro-adjusting geared tilting table• Cast iron wheels with polyurethane tires• Includes 1" blade• Approximate shipping weight: 680 lbs.

• Motor: 71⁄2 HP, 220V/440V*, 3-phase• Precision-ground cast iron table size: 331⁄2" x 235⁄8" x 2"• Table tilts 45˚ for bevel cuts• Floor to table height: 321⁄2"• Table height with included riser: 341⁄2"• Cutting capacity/throat: 241⁄2"• Maximum cutting height: 161⁄4"• Blade size: 180"–1811⁄2" long• Uses blades from 1⁄4" to 11⁄2" wide• Blade speed: 5300 FPM• Sealed and lubricated bearings• Overall size: 48" W x 831⁄2" H x 32" D• Approximate shipping weight: 951 lbs.

$79$79shipping

lower 48 states

G0555X $825.00 SALE $79500

G0514X2B $1725.00 SALE $167500

G0569 $2995.00 SALE $285000

G0513X2 $1095.00 SALE $105000

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

$179$179shipping

lower 48 states

$179$179shipping

lower 48 states

$99$99shipping

lower 48 states

G0555LANV $545.00 SALE $52500

G0514X $1495.00 SALE $145000

G0513ANV $895.00 SALE $82500

G0566B $2195.00 SALE $215000



Please visit grizzly.com® for details DRILL PRESSES

• Motor: 1⁄2 HP, 110V, single-phase• Swing: 34" maximum• Drill chuck: 1⁄64"–5⁄8"• Spindle travel: 31⁄4" • Spindle taper: JT-33• Speeds: 550, 880, 1520, 2490, 3470 RPM• Collar size: 2.160"• Precision-ground cast iron table• Table size: Bench Model: 85⁄8" x 9" Floor Model: 123⁄16" dia.• Table swing: 360º• Table tilts: 90º left & right• Overall height: Bench Model: 311⁄2" Floor Model: 641⁄2"• Approximate shipping weight: Bench Model: 97 lbs. Floor Model: 147 lbs.

5 SPEED RADIAL DRILL PRESSES5 SPEED BABY DRILL PRESS

• Motor: 1⁄3 HP, 110V, single-phase, ODP• Swing: 8"• Drill chuck: 1⁄64"–1⁄2"• Drilling capacity: 1⁄2" steel• Spindle travel: 2"• Speeds: 620, 1100, 1720, 2340, 3100 RPM• Collar size: 1.570"• Precision-ground cast iron table• Table size: 61⁄2" square• Table swing: 360º• Table tilts: 90º left & right• Overall height: 23"• Approximate shipping weight: 45 lbs.

G7945

G7946

Perfect for the small shop, this tough little guy won't get in your way when things get cramped. Put it away on the shelf when finished. Fantastic compact solution and great for miniature work!

• Motor: 3⁄4 HP, 110V, single-phase• Swing: 14"• Drill chuck: 1⁄64"–5⁄8"• Drilling capacity: 3⁄4" steel• Spindle taper: MT#2• Spindle travel: 31⁄4"• Speeds: 140, 260, 320, 380, 480, 540,

980, 1160, 1510, 1650, 2180, 3050 RPM• Collar size: 2.595"• Precision-ground cast iron table• Table swing: 360º• Table tilts: 90˚ left & right• Overall height: 38"• Approximate shipping weight: 154 lbs.

12 SPEED HEAVY-DUTY BENCHTOP DRILL PRESS

INCLUDES BUILT-IN LIGHT (BULB NOT INCLUDED)

All the features and dependability of an expensive industrial grade drill press—with a price tag that's astoundingly low.

• Motor: 1 HP, 110V/220V, single-phase, prewired 110V• Swing: 17"• Drill chuck: 1⁄64"–5⁄8"• Drilling capacity: 1" steel• Spindle taper: MT#3• Spindle travel: 43⁄4"• Speeds: 210, 310, 400, 440, 630, 670, 1260, 1430, 1650,

2050, 2350, 3300 RPM• Collar size: 3.623"• Precision-ground cast iron table• Table size: 135⁄8" square• Table swing: 360º• Table tilts: 90º left & right• Overall height: 70"• Approximate shipping weight: 283 lbs.

12 SPEED 17" FLOOR DRILL PRESS

INCLUDES BUILT-IN LIGHT (BULB NOT

INCLUDED)

INCLUDES BUILT-IN LIGHT (BULB NOT

INCLUDED)

If you use your drill press commercially and need power and capacity, this is one drill press you should look at seriously. Note the 43⁄4" spindle travel!

• Motor: 11⁄2 HP, 110V/220V, single-phase, prewired 110V

• Swing: 20"• Drill chuck: 1⁄64"–5⁄8"• Drilling capacity: 11⁄4" steel• Spindle taper: MT#4• Spindle travel: 43⁄4"• 12 Speeds: (210, 310, 400, 440, 630, 670,

1260, 1430, 1650, 2050, 2350, 3300 RPM)• Collar size: 3.623"• Precision-ground cast iron table• Table size: 183⁄4" x 163⁄4"• Switch & wiring: 110V only• Overall height: 703⁄4"• Approximate shipping weight: 331 lbs.

12 SPEED 20" FLOOR DRILL PRESSThe MT #4 spindle taper, 11⁄2 HP motor and precision-ground T-slotted table will handle just about any drilling job.

• Motor: 3⁄4 HP, 110V, single-phase• Swing: 14"• Drill chuck: 1⁄64"–5⁄8" • Drilling capacity: 3⁄4" steel• Spindle taper: MT#2• Spindle travel: 31⁄4"• Speeds: 140, 260, 320, 380, 480, 540,

980, 1160, 1510, 1650, 2180, 3050 RPM• Collar size: 2.595"• Precision-ground cast iron table• Table size: 113⁄8" square• Table swing: 360º• Table tilts: 90º left & right• Overall height: 64"• Approximate shipping weight: 171 lbs.

12 SPEED HEAVY-DUTY 14" FLOOR DRILL PRESS

INCLUDES BUILT-IN LIGHT (BULB NOT INCLUDED)

G7942 $115.00 SALE $10500$79$79


$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

G7943 $325.00 SALE $29500 G7944 $395.00 SALE $37500

$99$99shipping

lower 48 states

$99$99shipping

lower 48 statesG7947 $575.00 SALE $54500 G7948 $695.00 SALE $65000

G7945 Benchtop $275.00 SALE $25500

G7946 Floor $325.00 SALE $29500

81-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

SPIRAL CUTTERHEADS

We’ve found yet another source for high quality Spiral Cutterheads. These cutterheads feature four spirals and German-made carbide inserts for an incredible finish. To determine correct fit, see cross-reference chart below or the catalog page for your machine.

CROSS REFERENCE FOR CUTTERHEADS

These cutterheads replace the standard straight-knife cutterheads on our Grizzly jointers and planers. Each cutterhead has four spirals with indexable, four-sided carbide inserts, so each insert can be rotated for a new factory-sharp edge. The 6" and 8" Jointer cutterheads include cast iron pulleys, bearing blocks and mounting studs. All cutterheads include five extra inserts, T-handle wrench, Torx® bits and spare insert screws. These Grizzly cutterheads leave an incredible finish, and are comparable to the Byrd® cutterheads in quality of cut as well as the quality of the cutterhead itself. The inserts are imported from Germany.

BYRD® SHELIX CUTTERHEADSMade in the USA by Byrd®, these indexable carbide insert cutterheads are very well made and leave a great finish. The inserts are not only placed along a spiral pattern, they are also at an angle so that the shearing action leaves a glassy smooth cut on the toughest of woods. Each cutterhead comes with 5 extra replacement inserts.

H7653 H7654H7655

H7656

INDEXABLE CARBIDE SPIRAL CUTTERHEADS

SPIRAL CUTTERHEADS INCLUDES GERMAN MADE SOLID CARBIDE INSERTS

Grizzly® Indexable H7653 6" H7654 8" H7655 15" H7656 20"

Grizzly® Indexable T10125 6" T10130 6" T10126 8" T10127 12" T10128 15" T10129 20"

Byrd/Shelix H7764 6" H9218 6" H7765 8" H8803 8" H9291 12" H7768 15" H7769 20"

6" Jointer 6" Jointer 8" Jointer 8" Jointer 12" Jointer 15" Planer 20" PlanerGrizzly G1182 Series, G0452, G0654 G0604, G0604X G0500, G0586, G1018 G0490 G0609 G1021 Series, G0550/51, G0453 G1033 Series, G0454Bridgewood BW-6R BW8J BW15P BW20PDelta DJ-20 DC380, 22/675, 22/780, 22/785, 22-790X & X5General 80-100L, 80-150L 30-115, 30-125CE 30-300Jet JJ-60S, JJ-6CSX, JJ6CSDX JJ8CS JJ-12 JWP-15CS JWP-208-1, 208Powermatic 1791279DX-54A, 1791279DXK-54A P1285 1791209-15, 1791210-15S 209Rigid JP0610Shop Fox W1679 W1684 W1741 W1744 W1692, W1723, W1724, W1742 W1683, W1718, W1747, W1754Sunhill CT-60L, SM-150 SM-204, CT-204L CT-38B, CT-382 CT-508Woodtek 855266 924083

Generic CT-200Oliver 4255, Yorkcraft YC-12J

CT-508

T10126

H7765H7768

CHECK OUT OUR WEBSITE AT GRIZZLY.COM FOR MORE INFORMATION ABOUT CUTTERHEADS

MODEL TYPE REG. SALEH7653 6" Cutterhead with 34 Inserts $293.95 $25995

H7654 8" Cutterhead with 40 Inserts $362.95 $31995



H7319 10-Pack—14mm x 14mm x 2mm Inserts $32.95 $2895

MODEL TYPE REG. SASALET10125 6" Cutterhead with 32 Inserts (G0452) $298.00 $26995

T10126 8" Cutterhead with 40 Inserts (G0490) $425.00 $38500





T21348 10-Pack—14mm x 14mm x 2mm Inserts $69.95 $5995

MODEL TYPE REG. SALEH7764 6" Shelix Cutterhead—30 Inserts $279.95 $24995

H9218 6" Shelix Cutterhead (G0604)—30 Inserts $299.95 $26995

H7765 8" Shelix Cutterhead—40 Inserts $385.00 $34995


T23860 8" Shelix Cutterhead (G0656/P)—40 Inserts $339.95 $29995





H7354 10-Pack Shelix Inserts—15mm x 15mm x 2.5mm $34.95 $2995




PLANERS

• Motor: 5 HP, 240V, single-phase• Maximum cutting width: 20"• Maximum stock thickness: 8"• Minimum stock thickness: 3⁄16"• Minimum stock length: 71⁄2"• Maximum cutting depth: 1⁄8"• Cutterhead diameter: 31⁄8"• Number of carbide inserts: 98• Cutterhead speed: 5000 RPM• Feed rate: 16 FPM & 20 FPM• Feed rolls: solid serrated steel• Table size: 20" x 253⁄4"

(20" x 551⁄2" with extension)• Overall dimensions:

555⁄8" long x 39" wide x 457⁄8" high• Approximate shipping weight: 932 lbs.

• Motor: 2 HP, 110V, single-phase, 15A• Maximum cutting width: 121⁄2"• Maximum cutting height: 6"• Maximum cutting depth: 3⁄32"• Minimum board thickness: 13⁄64"• Feed rate: 32 FPM• Number of knives: 2 double edged HSS• Knife size: 121⁄2" x 23⁄32" x 1⁄8"• Cutterhead speed: 10,000 RPM• Number of cuts per inch: 52• ON/OFF toggle switch with safety lock• Thermal overload protection• Top mounted return rollers• Includes knife setting jig and wrench• Approximate shipping weight: 78 lbs.

121⁄2" LEAN & MEAN PLANER

WITH DOUBLE-SIDED

KNIVES!

• Motor: 3 HP, 220V, single-phase• Maximum cutting width: 15"• Maximum stock thickness: 8"• Minimum stock thickness: 3⁄16"• Minimum stock length: 8"• Maximum cutting depth: 1⁄8"• Feed rate: 16 & 30 FPM• Cutterhead diameter: 3"• Number of knives: 3• Cutterhead speed: 4800 RPM• Power feed rollers: solid serrated steel• Precision-ground table size: 15" x 20"• Overall dimensions: 42" L x 321⁄2" W x 457⁄8" H• Approximate shipping weight: 675 lbs. (G0453),

662 lbs. (G0453P)

15" PLANERS WITH 3 KNIFE CUTTERHEAD

PRECISION-GROUND CAST IRON BED & INFEED OUTFEED TABLES

PRECISION-GROUND CAST IRON BED & INFEED OUTFEED TABLES15" PLANERS WITH SPIRAL CUTTERHEADS

20" PLANER WITH SPIRAL CUTTERHEAD 20" PROFESSIONAL PLANER WITH 4 KNIFE CUTTERHEAD

20" PLANER WITH 4 KNIFE CUTTERHEAD• Motor: 3 HP, 240V, single-phase• Maximum cutting width: 15"• Maximum stock thickness: 8"• Minimum stock thickness: 3⁄16"• Minimum stock length: 8"• Maximum cutting depth: 1⁄8"• Feed rate: 16 FPM & 30 FPM• Cutterhead diameter: 3"• Number of indexable carbide inserts: 74• Cutterhead speed: 4800 RPM• Power feed rollers: solid serrated steel• Precision-ground table size: 15" x 20"• Overall dimensions:

42" long x 321⁄2" wide x 457⁄8" high• Approximate shipping weight:

672 lbs. (G0453Z), 666 lbs. (G453PX)

• Motor: 5 HP, 240V, single-phase• Maximum cutting width: 20"• Maximum stock thickness: 8"• Minimum stock thickness: 3⁄16"• Minimum stock length: 8"• Maximum cutting depth: 1⁄8"• Cutterhead diameter: 31⁄8"• Number of knives: 4• Knife size: 20" x 1" x 1⁄8"• Cutterhead speed: 5000 RPM• Feed rate: 16 FPM & 20 FPM• Feed rolls: solid serrated steel• Table size: 20" x 253⁄4"

(20" x 551⁄2" with extension)• Overall dimensions:

551⁄2" long x 391⁄2" wide x 457⁄8" high• Approximate shipping weight: 920 lbs.• CSA versions of this machince may be

in stock. Please call for availability

MADE IN TAIWAN • Cutterhead motor: 5 HP, 220V, single-phase, 25A• Feed motor: 2 HP, 220V, single-phase, 12A• Precision-ground cast iron table• Table size: 211⁄4" x 281⁄4"• Maximum cutting width: 20"• Maximum cutting height: 8"• Maximum cutting depth: 1⁄8"• Minimum stock thickness: 1⁄4"• Minimum stock length: 8"• Feed rate: 17–26 FPM• Number of knives: 4• Knife size: 20" x 1" x 1⁄8"• Cutterhead speed: 5200 RPM• Power transfer: double V-belt• Overall dimensions:

38" wide x 421⁄4" high x 401⁄2" deep• Approximate shipping weight: 1010 lbs.





208624

208624

208624

G0453 $1125.00 SALE $102500

Polar Bear Series®

G0453P $1125.00 SALE $102500

G0453Z $1850.00 SALE $179500

Polar Bear Series®

G0453PX $1750.00 SALE $169500

$150$150shipping

lower 48 states

$179$179shipping

lower 48 states

$49$49shipping

lower 48 states

$179$179shipping

lower 48 states

$179$179shipping

lower 48 states

G0505 $315.00 SALE $28995

G0454 $1695.00 SALE $165000

G5850Z $3850.00 SALE $379500G0454Z $2575.00 SALE $252500

$150$150shipping

lower 48 states

101-800-523-4777

FREE760 PAGE

2014 CATALOGSHAPERS

• Heavy-duty motor: 11⁄2 HP, 120V/240V, single-phase, prewired 120V

• Precision-ground cast iron table• Table size: 201⁄4" x 18"• Floor to table height: 331⁄2" • Spindle travel: 3" • 2 interchangeable spindles: 1⁄2" and 3⁄4"• Spindle openings: 11⁄4", 31⁄2", and 5"• Spindle speeds: 7000 and 10,000 RPM• All ball bearing construction• Maximum cutter diameter: 5"• Powder coated paint• Approximate shipping weight: 221 lbs.

11⁄2 HP SHAPERS

G1035 SHOWN WITH G1706 OPTIONAL

WING

• Motor size: 2 HP, 120V/240V, single-phase, prewired 240V

• Table size: 24" x 21"• Spindle travel: 3"• Spindle sizes: 1⁄2" and 3⁄4" (included)• Spindle speeds: 7000 and 10,000 RPM• Miter gauge slot: T-slotted• Stand: cabinet style, powder coated paint• Cord length: 10' x 14 Gauge• Maximum cutter diameter: 5"• Approximate shipping weight: 290 lbs.

2 HP SHAPER

• Motor: 5 HP, 220V, single-phase, TEFC or 71⁄2 HP, 220V/440V*, 3-phase

• Heavy-duty, precision-ground cast iron table and fence assembly

• Table size: 351⁄2"x 28"• Table counterbore: 7" x 5⁄8" deep• Spindle travel: 31⁄4"• Spindle sizes: 3⁄4", 1 and 11⁄4"• Spindle capacity: 51⁄8" (11⁄4" spindle)• Spindle speeds:

3600, 5100, 8000 and 10,000 RPM• Maximum cutter diameter: 57⁄8"• Overall dimensions: 351⁄2" W x 42" H x 343⁄4" D• One piece cabinet style stand• Powder coated epoxy paint• Independent, micro-adjustable fence with

4" dust port• Shielded & permanently lubricated ball bearings• Approximate shipping weight: 602 lbs.

PROFESSIONAL SPINDLE SHAPERS PROFESSIONAL TILTING SPINDLE SHAPERS

2 YEAR WARRANTY!

• Motor: 3 HP, 240V, single-phase, with reversing switch

• Precision-ground cast iron table• Table with extension wing attached:

301⁄2" x 281⁄4"• Floor to table height: 34"• Spindle travel: 3"• 3 interchangeable spindles:

1⁄2", 3⁄4" and 1"• Spindle openings on table:

11⁄4", 3", 4" and 7"• Spindle speeds: 7000 & 10,000 RPM• Approximate shipping weight: 392 lbs.

3 HP SHAPER

3⁄4 HP SHAPER WITH ROUTER BIT ADAPTER• Motor size: 3⁄4 HP, 110V, single-phase• Amps: 10• Table size: 155⁄8" x 173⁄4"• Floor to table height: 341⁄4"• Table counterbore: 3" diameter x 5⁄16" deep• Spindle travel: 7⁄8"• Spindle diameter: 1⁄2"• Spindle length: 3"• Spindle capacity under nut: 23⁄8"• Spindle speed: 8900 RPM• Overall height (includes fence): 401⁄4"• Overall depth: 23"• Overall width: 27"• Approximate shipping weight: 172 lbs.

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

177335

177335

177335


MADE IN TAIWAN

MADE IN TAIWAN

• Motor: 5 HP, 220V, single-phase or 71⁄2 HP, 220V/440V*, 3-phase• Cast iron table and fence assembly• Table size: 28" x 351⁄2" • Table counterbore: 7" x 5⁄8" deep• Spindle travel: 31⁄4" • Spindle tilt: 45°• Spindle sizes: 3⁄4", 1" and 11⁄4"• Spindle speeds: 3600, 5100, 8000 and 10,000 RPM• Spindle capacity under nut: 51⁄8" (11⁄4" spindle)• Maximum cutter diameter: 57⁄8"• Welded steel cabinet• Tilting spindle allows for infinite profile possibilities

with your existing shaper cutters• Independent, micro adjustment fence• Forward/reversing switch• 4" dust port• Sturdy hold-downs and cast iron miter gauge standard• Overall dimensions: 351⁄2"W x 43" H x 39" D

(to top of switch)• Approximate shipping weight: 702 lbs.

$79$79shipping

lower 48 states

Mini SHOP FOX® Mobile Base

D2260A $59.95 SALE $5495


D2260A $59.95 SALE $5495

G1035 $595.00 SALE $55500

Polar Bear Series®

G1035P $595.00 SALE $55500

Optional Cast Iron Wing (20" x 10")G1706 $99.95 SALE $8995

$79$79shipping

lower 48 states

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states


$150$150shipping

lower 48 states

$150$150shipping

lower 48 states

G1026 $1150.00 SALE $109500W1674 $1025.00 SALE $96400

G0510Z $425.00 SALE $39500


G5912Z 5 HP $2550.00 SALE $249500

G7214Z 71⁄2 HP $2675.00 SALE $259500G5913Z 5 HP $3095.00 SALE $299500

G7215Z 71⁄2 HP $3195.00 SALE $309500



Please visit grizzly.com® for details POWER FEEDERS

• Motor: 1 HP, 240V, single-phase or 3-phase

• Number of speeds: 4• Range of speeds: 13, 26, 33, 66 FPM• Rollers: 3, synthetic

rubber, 21⁄4" W x 45⁄8" D• Rotation: forward &

reverse• Maximum height of rollers: 7"• Rack & pinion horizontal

adjustment• Vertical movement: 9"• Horizontal movement: 17"• Approximate shipping weight: 140 lbs.

• Motor: 1⁄2 HP, 220V, single-phase, 4A• Number of speeds: 4• Range of speeds: 9.5, 15, 25, 38 FPM• Rollers: 3, synthetic rubber, 2" W x 4" Dia.• Rotation: forward and reverse• Maximum height of rollers: 7"• Vertical movement: 9" • Horizontal movement: 16"• Approximate shipping weight: 107 lbs.

• Motor: 1 HP, 220V, single-phase or 3-phase• Number of speeds: 4• Feed speeds: 14.5, 29, 39

& 78 FPM• Number of rollers: 5• Track size: 44" x 1⁄2" x 3 pieces• Track suspension: 3⁄4"• Minimum workpiece length: 8"• Vertical movement: 91⁄2"• Horizontal movement: 241⁄4"• Approximate shipping weight:

150 lbs.

• Motor: 1 HP, 220V, 3-phase• Number of speeds: 8• Feed speeds (G1541): 8.2, 11.5, 16.4, 23, 29.5,

37.7, 59 & 75.5 FPM. (G1542): 10, 12, 19, 24, 31, 40, 60 & 70 FPM

• Number of rollers: 6 independent• Centers between rollers: 11⁄4"• Mininum workpiece length: 2"• Vertical movement: 83⁄8"• Horizontal movement: 291⁄4"• Approximate shipping weight:

205 lbs.

• Motor: 1⁄8 HP, 120V, single-phase, 1.2A• Variable speed range: 61⁄2 - 39 FPM• Rotation: forward & reverse• Rollers: 3, synthetic rubber, 13⁄16" W x 3" Dia.• Maximum height of rollers: 6"• Vertical movement: 101⁄4"• Horizontal movement: 241⁄4"• Approximate shipping weight: 27 lbs.

COPY POWER FEEDER

TRACK FEEDERS WITH 4 SPEEDS

BABY POWER FEEDER PRO TRACK FEEDERS WITH SMART STAND

1 HP POWER FEEDERS

1⁄2 HP POWER FEEDER

MADE IN AN ISO 9001 RATED FACTORYMADE IN AN ISO 9001

RATED FACTORY





See pages 80–81 in our main catalog for more information


MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

LR109179

LR109179

• Motor: 1⁄2 HP, 220V, single-phase• Number of speeds: 8• Feed speeds: 7, 9.5, 14.5, 19, 24, 32, 48.5 & 64.5 FPM• Applicable for Jointers, Table Saws, Shapers and Edge Banders• Roller size: 19⁄16" wide x 7" dia.• Roller suspension: 3⁄4"• Excellent for curve line copying: circular shapes, ovals,

tabletops, chair seats and semi-circular shapes• A powerful model suitable for heavy-duty and

mass production applications• Vertical movement: 121⁄4"• Horizontal movement: 18"• Approximate shipping weight: 130 lbs.

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 statesG1093 $945.00 SALE $89500

G4173 $404.95 SALE $37500

G4179 $875.00 SALE $82500

G4181 Single-Phase $975.00 SALE $92500

G7873 3-Phase $950.00 SALE $89500

G1542 3-Phase $1995.00 SALE $189500

G1135 Single-Phase $1425.00 SALE $137500

G1168 3-Phase $1425.00 SALE $137500

121-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

SANDERS

• Motor: 1⁄3 HP, 110V, single-phase, 4A, 60 Hz• 1725 RPM spindle speed (no load)• ON/OFF safety paddle switch with locking tab• Extra large 20" x 14" table• Spindle oscillates at 72 SPM• 21⁄2" dust port• Includes six 41⁄2" tall

sanding drums, three 80 grit sleeves (1⁄2", 1" and 2"), three 150 grit sleeves (3⁄4", 11⁄2" and 3") and 6 table inserts


12" DISC SANDER WITH BUILT-IN BRAKE• Motor: 1 HP, 120V, single-phase,

1720 RPM, 9.5A, capacitor start with brake

• Table size: 151⁄2" x 15"• Base size: 161 ⁄2" long x 161⁄2" wide• Sanding disc size: 12"• Power transfer: Direct• Table tilt: +15° to -45°• Approximate shipping weight: 92 lbs.

BUILT-IN BRAKE STOPS MOTOR WITHIN 4 SECONDS WHEN

SWITCH IS TURNED OFF

BENCHTOP OSCILLATING SPINDLE SANDER

BENCHTOP OSCILLATING SPINDLE SANDER

• Motor: 1⁄4 HP, 120V, single-phase, 2.6A, 60 Hz• 1725 RPM spindle speed (no load)• ON/OFF safety paddle switch with locking tab• 18" diameter cast iron table• 1" spindle stroke• Spindle oscillates at 30 SPM• 2" dust port• Includes six 100 grit 41⁄2" tall sanding sleeves:

1⁄2", 3⁄4", 1", 11⁄2", 2", and 3" dia., 5 spindle washers and 5 table inserts


MADE IN TAIWAN

247570

10" DRUM SANDER• Motor 11⁄2 HP, 110V, single-phase (aluminum motor),

10.5A• Conveyor belt drive motor: 1⁄10 HP• Maximum sanding width: 91⁄2"• Maximum workpiece height: 3"• Minimum workpiece height: 1⁄4"• Drum speed: 2300 FPM• Drum size: 51⁄8" x 10"• Feed speed: 1–10 FPM• Dust port diameter: 4"• Approximate shipping weight: 220 lbs.

A perfect match to your bandsaw or scroll saw, this combination Belt/Disc Sander will shape and smooth right to the line. A 1⁄3 HP, capacitor start induction motor powers the 1" x 42" belt and 8" disc through any sanding chore

and the cast iron tilting tables give you the flexibility you demand. Includes single knob tracking and two 2" dust

ports. Approximate shipping weight is 63 lbs.

1" X 42" BELT/8" DISC SANDER

1" X 30" BELT/5" DISC SANDER• Motor: 1⁄3 HP, 110V, single-phase, 3450 RPM• Tables tilt: 45°

• Belt sander table size: 51⁄8" x 51⁄8"• Disc sander table size: 4" x 75⁄16"

• Platen size: 1" x 3"• Tracking adjustment

• Direct drive• Two dust ports: 113⁄16"

• Takes standard 1" x 30" belts & 5" PSA discs


• Motor: 1⁄4 HP, 110V, single-phase, 3450 RPM

• Table tilts: 45°• Table size: 5" x 5"• Platen size: 1" x 2"• Tracking adjustment• Direct drive• Built-in 11⁄2" dust port• Takes standard 1" x 30"

belts• Approximate shipping

weight: 16 lbs.

BELT SANDER 1" X 30"

OSCILLATING SPINDLE SANDER• Motor: 1⁄2 HP, 120V, single-phase, 3.5A, 60Hz• 58 oscillations per minute • 2000 RPM (1⁄2" spindle)• 11⁄2" dust port • CSA certified• Includes 5 rubber sanding drums:

3⁄4", 1", 11⁄2", 2", and 3" 6 sanding sleeves: 1⁄2",

3⁄4", 1", 11⁄2", 2", and 3" 6 table inserts: 1⁄2", 3⁄4", 1",

11⁄2", 2", and 3" 3 spindle washers: 5⁄8",

7⁄8", 13⁄4", and 23⁄4" Wrench

• Motor: 1⁄3 HP, 110V, single-phase, 3450 RPM• Amps: 2.6• Belt size: 2" x 27"• Disc size: 6"• Two 11⁄2" dust ports• Fully adjustable work

light• Includes one 80 grit

belt and disc, miter gauge, and sliding tray

COMBINATION 2" BELT/6" DISC SANDER

BENCHTOP OSCILLATING SANDER• Motor: 1⁄2 HP, 110V, single-phase, 3.5A• 1725 RPM spindle speed (no load)• 15" diameter cast iron table• Spindle oscillation: 29 OPM• 3 Rubber sanding drums: 3⁄4" x 31⁄2", 1" x 41⁄2", and 2" x 51⁄2"• 3 Sanding sleeves: 3⁄4" x 31⁄2", 1" x 41⁄2", and 2" x 51⁄2"• Table inserts: 4• Dust port: 2"• Paddle safety switch with removable key• Approximate shipping weight: 78 lbs.

226766

$79$79shipping


G0723 $199.95 SALE $17995

G0716 $425.00 SALE $39500$79$79


H7761 $119.95 SALE $10995

G0739 $149.95 SALE $11195G0538 $159.95 SALE $14995

H3140 $70.95 SALE $5995 H6070 $104.95 SALE $9495

H8192 $209.95 SALE $17995

T26417 INTRODUCTORY PRICE $27500

$49$49shipping

lower 48 states

13 grizzly.com®



Order at grizzly.com® • By Fax: 1-800-438-5901Customer Service: 1-570-546-9663

SANDERS

MADE IN TAIWAN

MADE IN TAIWAN 24" WIDE-BELT SANDER 24" WIDE-BELT SANDER• Sanding belt motor: 10 HP, 230V• Feed motor: 1 HP• Table elevation motor: 1⁄4 HP• Sanding belt: 25" x 60"• Drum speed: 2565 FPM• Conveyor speed: Variable 15–49 FPM• Maximum board dimensions: 24" W x 6" H• Minimum board dimensions: 14" L x 1⁄8" H• Approximate shipping weight: 1573 lbs.

• Sanding motor: 10 HP, 230V/460V, 3-phase, 25A/12.5A• Conveyor motor: 1 HP, 3.4A/1.7A• Table lift motor: 1⁄4 HP, 1.2A/0.6A• Footprint: 393⁄8" x 195⁄16"• Maximum board width: 24"• Maximum board thickness: 6"• Minimum board length: 9"• Minimum board thickness: 1⁄8"• Conveyor speed: 15-49 FPM• Sanding belt size: 25" x 75"• Overall size : 40" W x 771⁄2" H x 50" D• Approximate shipping weight: 1614 lbs.

MADE IN AN ISO 9001 RATED

FACTORY

MADE IN AN ISO 9001 RATED FACTORY 185500

185500

*To maintain machine warranty, 440V/460V operation requires additional conversion time and a $250 fee. Please contact technical service for complete information before ordering.

• Sanding motor: 11⁄2 HP, 115V, single-phase• Conveyor motor: 1⁄8 HP, 110V, single-phase,

variable speed 5–35 FPM• Drum surface speed: 2127 FPM• Maximum board dimensions:

12" wide x 31⁄2" thick• Minimum board length: 8"• Sanding drum size: 4"• Sanding belt size: 3" hook and loop• Dust collection port: 21⁄2"• Approximate shipping weight: 160 lbs.

12" BABY DRUM SANDERSFLOOR-MODEL OSCILLATING SANDER

18" OPEN END DRUM SANDER

MADE IN TAIWAN

177335

• Sanding motor: 11⁄2 HP, 110V, single-phase, 15A

• Drum surface speed: 4000 FPM• Conveyor feed rate: variable, 2–12 FPM• Maximum stock dimensions:

36" wide x 41⁄2" thick• Minimum board length: 6"• Minimum board thickness: 1⁄8"• Sanding drum size: 4"• Dust collection port: 21⁄2"• Overall size:

35" wide x 50" high x 24" deep• Approximate shipping weight: 328 lbs.

• Motor: 1 HP, 120V/240V, single-phase, TEFC• Cast iron 25" x 25" table tilts to 45° left, 15° right• Ten spindle sizes: 1⁄4" x 5", 3⁄8" x 6", 1⁄2" x 6", 5⁄8" x 6", 3⁄4" x 9",

1" x 9", 11⁄2" x 9", 2" x 9", 3" x 9", 4" x 9", tapered and threaded• Floor to table height: 351⁄2" • 1725 RPM spindle speed• Includes formed and welded steel stand• Spindle oscillates at 72 strokes-per-minute• Stroke length: 11⁄2"• Built-in 4" dust collection port• Lubricated for life ball bearings• Approximate shipping weight: 296 lbs.

OSCILLATING SPINDLE SANDER

24" DRUM SANDER• Motor: 5 HP, 220V, single-phase drum motor

drives 2 aluminum sanding drums• Surface speed of drum: 2300 FPM• Handles stock up to 231⁄2" wide and 41⁄4" thick• 1⁄4 HP Conveyor motor provides 11 FPM feed rate• Sandpaper installs easily onto the drums• Sanding drum size: 6"• All steel and ball bearing construction• Two 4" dust ports for easy hook-up to a

collection system• State-of-the-art computer balanced drums• Powder coated paint• Approximate shipping weight: 442 lbs.

177335

• Motor: 1 HP, 110V, single-phase, 6.9A• 1725 RPM spindle speed (no load)• 1911⁄16" diameter cast iron table• Spindle oscillation: 52 OPM• 3 Rubber sanding drums: 3⁄4" x 41⁄2", 2" x 9", and 3" x 9"• 3 Sanding sleeves: 3⁄4" x 41⁄2", 2" x 9", and 3" x 9"• Table inserts: 6• Sound rating: 78–80 dB• Dust port: 2"• Toggle ON/OFF safety switch with locking tab• Includes two wrenches for easy spindle changes• Approximate shipping weight: 143 lbs.

• Motor: 11⁄2 HP, 220V, 1725 RPM, single-phase• Disc size: 15"• Table size: 12" deep x 20" wide• Table tilt: +15° to –45°• Floor to table height: 37"• Dust port: 21⁄2"• Approximate shipping weight: 221 lbs.

15" DISC SANDER WITH STAND

MADE IN TAIWAN

$255$255shipping

lower 48 states

$255$255shipping

lower 48 states

G0445 $8950.00 SALE $859500G0582 $8195.00 SALE $799500

$79$79shipping

lower 48 states$79$79


G0459 $695.00 SALE $57500

G1066R $1695.00 SALE $159500G0458 $895.00 SALE $85000

T26418 $475.00 SALE $42500

$99$99shipping

lower 48 states

G1071 $775.00 SALE $72500

G0719 $875.00 SALE $82500

$99$99shipping

lower 48 states

$99$99shipping

lower 48 states

Polar Bear Series®

G0459P $695.00 SALE $57500

$79$79shipping

lower 48 states


D2260A $59.95 SALE $5495

141-800-523-4777

FREE760 PAGE

2014 CATALOGWOODWORKING MACHINES16" SCROLL SAW 16" SCROLL SAW WITH FLEXIBLE SHAFT GRINDER• Motor: 1⁄8 HP, 120V, DC• Variable speed: 550 to 1600 SPM• Tool-less blade changes• Uses 5" long pin or pin-less blades• Blade can be turned 90°• Adjustable lamp• 161⁄4" L x 10" W cast aluminum table• Table tilt: 45°• Dust blower• Dust port• Includes set of blades,

blade holder, drill bit, and wrenches

• Blade stroke: 3⁄4"• Cutting capacity: 2" at 0°; 25⁄32" at 45°• Approximate shipping weight: 30 lbs.

• Motor: 1⁄8 HP, 120V, DC• Variable speed: 550 to 1600 SPM (saw);

1650 to 4800 RPM (flex shaft)• Depth of throat: 16"• Tool-less blade changes• Uses 5" long pin or pin-less blades• Blade can be turned 90°• 42" flex shaft with 1⁄8" collet chuck• Adjustable lamp• 161⁄4" L x 10" W cast aluminum

table• Table tilt: 45°• Dust blower• Dust port• Includes set of blades, blade holder,

drill bit, and wrenches• Blade stroke: 3⁄4"• Cutting capacity: 2" at 0°; 25⁄32" at 45°• Approximate shipping weight: 31 lbs.

20" SCROLL SAW DW788

SPECIFICATIONS:• Amps: 1.3A• Strokes/Min: 400–1750 SPM• Blade stroke: 3⁄4"• Depth of cut: 2"• Weighs 60 lbs.

FEATURES:• Double parallel-link arm design dramatically reduces vibration and noise, for extremely

accurate cuts• Exclusive tool-free blade clamps allow blade changes in seconds• Arm lifts so blade can be easily threaded through the material for inside cuts• Unique arm design keeps the blade perpendicular to the work, dramatically reducing over

or under cutting• Oversized, cast iron table provides excellent material support and bevels 45° left & right• Includes hex wrench and blades

SPECIFICATIONS:• Motor: 1⁄8 HP, 110V, single-

phase, 1A, 60Hz• Variable speed motor• No load speed: 550–1700 SPM• Max. cutting thickness: 2"• Max. cutting width: 16"• Blade stroke: 51⁄64"• CSA certified• Approximate shipping

weight: 38 lbs.

16" VARIABLE SPEED SCROLL SAWVariable speed control, extra cutting capacity, and cast iron construction are the features most sought after in a scroll saw. The Shop Fox® Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45° tilt table, and easy blade changes. Uses plain and pin-type saw blades.

USES PLAIN OR PIN-TYPE BLADES

226002

16" X 43" SWIVEL-HEAD WOOD LATHE WITH CAST IRON LEGS & DIGITAL READOUT• Motor: 2 HP, 110V, single-phase• Swing over bed: 16"• Distance between centers: 46"• Swing over tool rest: 13"• Heavy-duty cast iron bed and legs ensure stability and minimal vibration• 1" x 8 TPI RH headstock spindle• Spindle tachometer with digital readout• MT#2 spindle & tailstock tapers• Spindle bore: 3⁄8"• Outboard turning is easy with the included tool rest extension• 10 speeds: 600–2400 RPM• Quick lock/release levers for tailstock and headstock• Includes 6" faceplate, cup live center, and spur center• Indexed headstock rotation at 0°, 60°, 90°, 120° and 180°• Overall dimensions:

721⁄2" long x 19" wide x 48" high• Approximate shipping weight: 354 lbs.

G0734 $149.95 SALE $13995

G4196 $478.95 SALE $43995

G0462 $625.00 SALE $57500

W1713 ONLY $15995

G0735 $185.95 SALE $15995

$99$99shipping

lower 48 states


SHOP FOX® MOBILE BASES

This is the strongest mobile base on the market. Made for machines that weigh up to 1300 lbs., this base is extremely stable with outrigger type supports. Adjusts from 181⁄2" x 241⁄2" to 281⁄2" x 331⁄2". Weighs 39 lbs.

The newest addition to the family of mobile bases. Don’t let the little size of this one fool you. It shares the same design concepts as its two bigger brothers, giving you an amazing 600 lb. capacity in a small package. Adjusts from 101⁄2" x 141⁄2" to 171⁄2" x 211⁄2". Weighs 32 lbs.

HEAVY-DUTY MOBILE BASE

SUPER HEAVY-DUTY MOBILE BASE

THE D2058A SUPER HEAVY-DUTY SHOP FOX® MOBILE BASE FITS THE FOLLOWING GRIZZLY®

MACHINES AND MANY OTHERS.

THE D2057A HEAVY-DUTY SHOP FOX® MOBILE BASE FITS THE FOLLOWING GRIZZLY® MACHINES

AND MANY OTHERS.

EXTENSION KIT FOR MOBILE BASES

EXTENSION BARS FOR SUPER HEAVY-DUTY MOBILE BASE

UNIVERSAL MOBILE BASE

These 36" extension bars replace the standard length side rails on the D2260A, D2057A and D2058A Mobile Bases. This allows each base to be assembled with a maximum length of 44". Suitable for longer machines such as lathes.

This patented base is the most stable on the market with outrigger type supports. Adjusts from 20" x 20" to 291⁄2" x 291⁄2". 700 lb. capacity. Weighs 34 lbs.

This kit easily bolts on to Models D2057A or D2258A to provide support for an extension table or similar device. Allows the whole machine and extension to move as one unit. Adjustable for length (up to 453⁄4") as well as front to back. Very versatile!

MINI MOBILE BASE

THE D2260A MINI SHOP FOX® MOBILE BASE FITS THE FOLLOWING GRIZZLY®

MACHINES AND MANY OTHERS

®

NOW FITS ALL A-VERSION SHOP FOX®

MOBILE BASES!

NOW FITS ALL A-VERSION SHOP FOX®

MOBILE BASES!

NEW, IMPROVED CASTERS & DESIGN

WITH INFINITE ADJUSTABILITY

WITHIN ITS RANGE!

IMPROVED DESIGN WITH CAST

IRON WHEELS AND INFINITE

ADJUSTABILITY WITHIN ITS RANGE!

IMPROVED CASTERS & DESIGN

WITH INFINITE ADJUSTABILITY

WITHIN ITS RANGE!

600 LB. CAPACITY

PATENTED

PATENTED

PATENTED

Bandsaws— G0621XMetal Cutting G8144Z

G8145ZBandsaws— G0457Wood G0513 Series

G0555 SeriesG0570G0580G1019G1148

Boring Machine G4185Drill Presses G0482

G0520G7947G7948

Bandsaws— G0613Metal Cutting G8146Bandsaws—Wood G1073 SeriesDrill Press G9747Edge Sander G0564Jointer G4178Mill/Drills G3102

G3103

Bandsaws—Meat H6246G0560

Drill Presses G0491G7944G7946

Edge Sanders G0574G1140

Jointers G0526G1182 Series

G1021 SeriesG1037Z

Sanders G0518G0529G0565G1014ZG9922

Shapers G1026W1674

Table Saws G0444 SeriesG0478G0575G0576G1023 Series

Edge Sander G0563Jointers G0500

G0543G0586G0593G1018 Series

Mill/Drills G0519G1006G1007G1126G3358

Overarm Router G8030Parts Washer G4013Planer W1812

G0550G0551

1300 LB. CAPACITY

Planer W1683G0544W1718G1033 SeriesG5850ZG5851ZG7213Z

Shapers G5912Z

Mill/Drill G0517Mortising Machine G0448Sanders G1014ZX

G1071W1676

Shapers G0510ZG1035 Series

G5913ZG8621G8622

Table Saws G5959 SeriesG7209G7210G9957

700 LB. CAPACITY

• Customize to fit any size machine base with your own cut-to-size plywood

• Sturdy corner brackets attach with included hardware• Kick-stand casters provide easy mobility• Adjustable feet provide stability during stationary

machine use• Includes two fixed caster brackets & two swivel caster

brackets• Dimensions: Min. 12" x 12", Max. 36" x 36"• 600 lb. capacity

Plywood not included

D2058A $89.95 SALE $7995

D2057A $69.95 SALE $5995

D2260A $59.95 SALE $5495 D2246A $33.75 SALE $2995

D3757 $59.95 SALE $5495

D2259A $69.95 SALE $5995

161-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

DUST COLLECTORS

2 HP DUST COLLECTOR WITH 2.5 MICRON BAG

• Motor: 1 HP, 110V, single-phase • Motor amp draw: 8A• Number of 4" intake holes: 1• Portable base size: 15" x 251⁄2"• Height with bags inflated: 63"• Bag size (diameter x depth):

141⁄2" x 23" (2)• Impeller: 9" balanced steel, radial fin• Air suction capacity: 500 CFM• Maximum static pressure: 2.76"• Approximate shipping weight: 67 lbs.

1 HP DUST COLLECTOR

• Motor: 2 HP, 240V, single-phase, 3450 RPM, 9A• 6" inlet with removable “Y” fitting with

(2) 4" openings• Impeller: 123⁄4" aluminum• Portable base size: 211⁄4" x 331⁄2"• Bag volume: 5.7 cubic feet• Height (with bags inflated): 78"• Bag size: 191⁄2" x 33" (2)• Air suction capacity: 1550 CFM• Maximum static pressure: 11"• Standard bag filtration: 2.5 Micron• Approximate shipping weight:

122 lbs.

11⁄2 HP DUST COLLECTOR• Motor: 11⁄2 HP, 120V/240V, single-phase, 3450 RPM• Motor amp draw: 12A/6A• Air suction capacity: 1300 CFM • Maximum static pressure: 9"• Standard bag filtration: 2.5 microns• 6" inlet “Y” with two 4" openings• Impeller: 123⁄4" cast aluminum, radial fin• Portable base size: 211⁄4" x 331⁄2"• Bag volume: 5.7 cubic feet• Height (with bags inflated): 78"• Bag size (diameter x depth): 191⁄2" x 33" (2)• Approximate shipping weight: 118 lbs.

• Motor: 3 HP, 240V, single-phase, 3450 RPM, 12A• Air suction capacity: 2300 CFM• Maximum static pressure: 16.7"• Impeller: 123⁄4" aluminum radial fin• 7" inlet with removable “Y” fitting with three

4" openings• Portable base size: 211⁄2" x 491⁄2"• Bag volume: 11.4 cubic feet• Height (with bags inflated): 78"• Bag size (diameter x depth): 191⁄2" x 33" (4)• Standard bag filtration: 2.5 Micron• Approximate shipping weight: 170 lbs.

3 HP DUST COLLECTOR

• Motor: 1 HP, 120V/240V, single-phase, prewired 120V• Motor amp draw: 9A/4.5A• Air suction capacity: 640 CFM with elbow,

800 CFM without elbow• Maximum static pressure: 3.3"• Lower bag capacity: 2.1 cubic feet• Number of 4" intake holes: 1• Impeller: 10", balanced steel, radial fin• Portable base size: 151⁄4" x 26"• Lower bag size: 141⁄2" x 22"• Overall height: 59"• Approximate shipping weight: 74 lbs.

1 HP CANISTER DUST COLLECTOR

MADE IN AN ISO

9001 RATED FACTORY


FACTORY


FACTORY

• Motor: 2 HP, 240V, single-phase• Impeller: 123⁄4" aluminum• Air suction capacity: 1700 CFM• Maximum static pressure: 10"• Sound rating: 74 dB• 6" inlet has removable “Y” fitting with three 4" inlets• Canister filter size (dia. x depth): 195⁄8" x 235⁄8"• Bag capacity: 5.7 cubic feet• Overall dimensions: 373⁄8" long x 311⁄2" wide x 71" high• Approximate shipping weight: 155 lbs.

2 HP DUST COLLECTOR

• Motor: 3 HP, 240V, single-phase• Impeller: 123⁄4" aluminum radial fin• Air suction capacity: 2320 CFM• Maximum static pressure: 16.9"• Sound rating: 87 dB• 7" inlet has removable “Y” fitting with three 4" inlets• Canister filter size (dia. x depth): 195⁄8" x 235⁄8" (x 2)• Bag capacity: 11.4 cubic feet• Overall dimensions: 577⁄8" long x 32" wide x 71" high• Approximate shipping weight: 232 lbs.

3 HP DUST COLLECTOR



247570

247570

247570

247570

247570

247570

• Motor: 1 HP, 120V/240V, prewired 120V, 7A/3.5A • Air suction capacity: 537 CFM • Static pressure: 7.2" • Bag capacity: 1.5 cubic feet• Intake hole size: 4" • Impeller: 10" balanced cast aluminum• Portable base size: 14" x 14" • Bag size (dia. x depth):

131⁄2" x 24"• Bag filtration: 30 micron• Height with bags inflated: 191⁄2"• Approximate shipping weight: 51

lbs.• CSA certified

1 HP DUST COLLECTOR

MADE IN TAIWAN


247570

G1028Z2 $315.00 SALE $30500

G1029Z2P $335.00 SALE $32500$79$79


$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 statesG0583Z $345.00 SALE $32500

G1030Z2P $439.95 SALE $42500

G0548ZP $450.00 SALE $42995

G0562ZP $675.00 SALE $65000

G8027 $195.00 SALE $18500

FREE!2-Stage Cylone SeparatorW1049—a $34.25 value

G1163P $195.00 SALE $17500

17 grizzly.com®




DUST COLLECTORS

2 HP DUST COLLECTOR

MADE IN TAIWAN



247570

Hose not included

1 HP WALL-MOUNT DUST COLLECTOR• Motor size: 1 HP, 120V/240V, single-phase,

prewired 120V• Amps: 7A at 120V, 3.5A at 240V• Intake hole size: 4"• Bag size (diameter x depth): 131⁄2" x 24"• Powder coated paint• Impeller: 10" balanced cast aluminum• Airflow capacity: 537 CFM• Maximum static pressure: 7.2"• Approximate shipping weight: 50 lbs.• CSA certified

SPECIAL WALL MOUNT DESIGN!

2-YEAR WARRANTY!

4 HP DUST COLLECTOR 1 HP WALL HANGINGDUST COLLECTOR

10 HP INDUSTRIAL DUST COLLECTOR

• Motor size: 1 HP, 120V/240V, single-phase, prewired 120V

• Amps: 7A at 120V, 3.5A at 240V• Intake hole size: 4"• Bag size (diameter x depth): 131⁄2" x 24"• Powder coated paint• Impeller: 10" balanced cast aluminum• Airflow capacity: 537 CFM• Maximum static pressure: 7.2"• Approximate shipping weight: 50 lbs.• CSA certified

• Motor: 4 HP, 240V, single-phase• Air suction capacity: 3552 CFM• Intake port with manifold: 4 x 4"• Static pressure: 13.5"• Intake port without manifold: 10"• Impeller: 141⁄2" balanced steel, radial fin• Machine collection capacity: 4 or more• Switch type: Magnetic• Bag size (diameter x depth): 235⁄8" x 471⁄4"• Collection bag capacity: 12 cubic feet• Standard bag filtration: 30 micron• Height with bag inflated: 1011⁄8"• Approximate shipping weight: 306 lbs.• Optional Bag Replacement: T23373 Upper

Bag; T23374 Lower Bag

247570

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

• Motor: 2 HP, 220V, single-phase, 3450 RPM, 12A• Airflow capacity: 1550 CFM• Maximum static pressure: 12.3"• 6" inlet has removable “Y” fitting with two 4" openings• Impeller: 12" balanced steel, radial fin• Bag capacity: 5.4 cubic feet• Standard bag filtration: 30 micron• Portable base size: 211⁄2" x 331⁄2"• Bag size (dia. x depth): 19" x 33" (2)• Powder coated paint• Height with bags inflated: 78"• Approximate shipping weight: 107 lbs.

SPECIFICATIONS:• Motor: 10 HP, 220V/440V*, 3-phase, TEFC• Amps: 30A at 220V, 15A at 440V• Airflow capacity: 5360 CFM• Maximum static pressure: 17.9"• Intake port with manifold: 4" x 5 Holes• Intake port without manifold: 10"• Impeller: 17" balanced steel, radial fin• Upper bag size (x 4): 235⁄8" x 70"• Lower bag size (x 4): 235⁄8" x 54"• Collection bag capacity: 48 cubic feet• Bag filtration: 2.5 micron• Collection bags: 8• Overall dimensions:

61" wide x 134" high x 61" deep• Approximate shipping weight:

472 lbs.

FEATURES:• TEFC induction thermal

overload protection motor• Magnetic switch• Four heavy-duty legs with 3"

casters and brakes• Welded, 1⁄4" balanced steel,

radial impeller• Heavy-duty plastic bottom

bags

*This machine is prewired for 220V. If you require 440V operation, Grizzly must convert your machine at the time of purchase to maintain the machine’s warranty. A $250 fee will be added to your order. Please allow extra shipping time for the conversion. If you need more information, please contact technical service.

G0710P $179.95 SALE $16995

G0710 $175.00 SALE $16995

G0671 $1050.00 SALE $99500

G0673 $1850.00 SALE $179500W1666 ONLY $37995$150$150


$79$79shipping

lower 48 states

$99$99shipping

lower 48 states

181-800-523-4777

FREE760 PAGE

2014 CATALOGDUST COLLECTORS

Cyclonic action separates large chips and dust from the air then drops them into the steel drum. The air is then filtered by a spun bond polyester filter that traps 99.9% of all particles as small as 0.2 microns. The cartridge filter is pleated to provide maximum surface area for efficient air movement and a clear plastic bag collects the fine dust brushed from the inside of the filter by our patented cleaning system.

Casters mounted to the drum also make disposal of the larger chips and dust as easy as it gets. Other features include a vertical motor support for reduced vibration, thick-walled steel blower housing and cyclone body, rotatable blower for optimum dust line placement, and a TEFC class "F" motor.

EASY SETUP FOR WALL MOUNTING

(G0440, G0441, G0443)

ALL MODELS COME WITH A REMOTE CONTROLLED MAGNETIC

SWITCH WITH A TIMER!

OVER TWO YEARS IN THE MAKING, THESE CYCLONE DUST COLLECTORS ARE THE BEST IN THEIR CLASS—AT ANY PRICE!

99.9% DUST FILTRATION FROM 0.2–2 MICRONS

• Motor: 11⁄ 2 HP, 110V/220V, single-phase, TEFC, 3450 RPM, prewired 110V

• Air suction capacity: 775 CFM• Static pressure at rated CFM: 1.80"• Intake port: 6" with included 5"

optional port• Impeller: 131⁄2"• Cartridge filter surface area:

48 square feet• Overall dimensions:

381⁄4" W x 651⁄2" H x 231⁄4" D• Approximate shipping weight:

210 lbs.

11⁄2 HP CYCLONE DUST COLLECTOR

• Motor: TEFC Class “F”, 2 HP, 220V, single-phase, 14A, 60 Hz, 3450 RPM

• Switch: Remote controlled magnetic• Intake hole size: 7"• Bag material: Plastic• Impeller size: 141⁄2", steel riveted• Suction capacity: 1354 CFM @ 2.5" SP• Maximum static pressure

(inches of water): 10.4"• Filter: 99.9% efficiency captures

0.2–2 micron dust particles• Filter surface area: 96 sq. ft.• Collection drum: Steel, 35 gal.• Overall dimensions:

59" W x 931⁄2" H x 38" D• Approximate shipping weight: 352 lbs.

2 HP CYCLONE DUST COLLECTOR

5 HP CYCLONE DUST COLLECTOR 71⁄2 HP 3-PHASE CYCLONE DUST COLLECTOR

• Motor: TEFC Class “F”, 3 HP, 220V, single-phase, 22A, 60 Hz, 3450 RPM

• Switch: Remote controlled magnetic• Intake hole size: 8"• Bag material: Plastic• Impeller size: 151⁄2" steel• Suction capacity: 1654 CFM @ 2.0" SP• Maximum static pressure

(inches of water): 14.2"• Filter: 99.9% efficiency captures 0.2–2 micron

dust particles• Filter surface area: 113 sq. ft.• Collection drum: Steel, 55 gal.• Overall dimensions: 601⁄4" W x 109" H x 381⁄2" D• Base construction: Pre-formed steel• Approximate shipping weight: 400 lbs.

3 HP CYCLONE DUST COLLECTOR


LOW-PROFILE— ONLY 65 1/2" TALL

Shown with Optional

H7499 Stand

Shown with Optional H7509 Stand

201825

201825

201825

201825

• Motor: 5HP, 220V, single-phase, 3450 RPM, 60 Hz, 22.4A, TEFC, Class "F"

• Switch: Remote controlled magnetic• Intake hole size: 10" with 8" adapter• Bag material: Plastic• Impeller: 16" steel radial fin• Air suction capacity: 2184 CFM @ 1.9" SP• Maximum static pressure: 14.0"• Filter: 99.9% efficiency captures 0.2–2 micron

dust particles• Filter surface area: 226 sq. ft.• Collection drum: Steel, 55 gallons• Overall dimensions: 63" W x 1111⁄2" H x 567⁄8" D• Approximate shipping weight: 644 lbs.

• Motor: TEFC Class "F", 71⁄2 HP, 220V/440V*, 3-phase, 25A/12.5A

• Intake hole size: 10"• Filter surface area: 261 sq. ft• Impeller: 18" steel radial fin• Air suction capacity: 3468 CFM @ 4.3" SP• Maximum static pressure (inches of

water): 14.7"• Sound level: 84-88 dB• Filter: Spun bond polyester, 99.9%

efficiency from 0.2-2 microns• Collection drums: Steel, 55 gallon x 2• Overall dimensions: 763⁄4" L x 60" W x

1393⁄8" H• Stand: 13 gauge steel• Cyclone body: 16 gauge steel• Blower housing: 11 gauge steel• Approx. shipping weight: 989 lbs.

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

MADE IN TAIWAN

*To maintain machine warranty, 440V/460V operation requires additional conversion time and a $250 fee. Please contact technical service for complete information before ordering.

G0703P $825.00 SALE $79500

StandH7499 ONLY $24500

$79$79shipping

lower 48 states

StandH7509 ONLY $27500

$79$79shipping

lower 48 states

G0440 $1195.00 SALE $115000$99$99


G0441 $1495.00 SALE $139500

G0442 $2495.00 SALE $239500 G0637 $3650.00 SALE $349500

$79$79shipping

lower 48 states

$150$150shipping

lower 48 states

$179$179shipping

lower 48 states

$99$99shipping

lower 48 states


DUST COLLECTION ACCESSORIES

We carry hose diameters for many different applications. Our amazing new hose retracts to 1⁄3 its full length, with increased puncture resistance and superior performance. No longer will you need to deal with, or navigate around, excess hose.

FLEXIBLE HOSES

Our starter kits include everything you will need for a simple, single machine set up at one low price. The branch and end cap make your dust collection system expansion ready for future growth. The machine addition kit will allow you to expand as your shop gets bigger. Choose from 4, 5, or 6 inch diameters for either kit. The big advantage of these metal fittings lies in their design flexibility—they can be unclamped and reconfigured in a new shop layout. That means these can last a lifetime!

INCLUDES:• Two machine adapters• Ten pipe clamps• Three 5' pipes• One “Y” branch• Three pipe hangers• One end cap• Three adjustable nipples• One 90° elbow• One 60° ebow

INCLUDES:• Two blast gates• One machine adapter• Ten pipe clamps• Two pipe hangers• Two 5' pipes• Two adjustable nipples• One “Y” branch• One 60° Elbow

STARTER KITS MACHINE ADDITION KITS

INDUSTRIAL DUST COLLECTION FITTINGS

Shipping for H5297 Shipping for H5298

DUST COLLECTION KIT #1Designed for a one machine hook-up, Kit #1 comes complete with installation instructions and an accessories list for expanding your dust collection system in the future.

DUST COLLECTION KIT #2Designed for two machine hook-ups, Kit #2 comes complete with installation instructions and an accessories list for future expansion of your dust collection system.

ACCESSORIES INCLUDED:• (1) D4216 4" ID x 10' Hose• (1) W1010 Universal Dust Hood 4" OD• (2) W1317 Wire Hose Clamps

ACCESSORIES INCLUDED:• (2) W1007 4" OD Blast Gate• (2) D4216 4" ID x 10' Hose• (1) W1004 Table Saw Dust Hood 4" OD• (1) W1010 Universal Dust Hood 4" OD• (1) W1015 Y-Fitting 4" x 4" x 4" OD• (10) W1317 Wire Hose Clamps

Spiral reinforced Clear Hose allows easy inspection for locating potential clogs in your duct work.

CLEAR HOSE

MODEL SIZE REG. SALE

D4209 3" ID x 6" $1.25 95¢D4210 4" ID x 6" $1.25 95¢D4211 2" ID x 10' $10.95 $995

D4212 21⁄2" ID x 10' $11.95 $1095

D4213 3" ID x 10' $13.95 $1195

D4214 3" ID x 20' $25.75 $2295

D4215 3" ID x 50' $59.95 $5195

D4216 4" ID x 10' $15.95 $1395

D4217 4" ID x 20' $32.95 $2895

D4218 5" ID x 10' $21.95 $1895


D4200 3" ID x 6" $1.25 95¢D4201 4" ID x 6" $1.25 95¢D4202 2" ID x 10' $13.95 $1195

D4203 21⁄2" ID x 10' $15.95 $1395

D4204 3" ID x 10' $17.95 $1595

D4205 3" ID x 20' $34.95 $2995

D4206 4" ID x 10' $19.95 $1795

D4207 4" ID x 20' $35.95 $3095

D4208 5" ID x 10' $27.95 $2395

$1000$1000


H5293 4" $616.00 $43900

H5295 5" $667.00 $47900

H5297 6" $714.00 $51900


H5294 4" $563.00 $39995

H5296 5" $599.00 $42900

H5298 6" $651.00 $46900

W1055 $59.95 SALE $5195

W1054 $21.50 SALE $1895

$1000

201-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON


Available in two sizes for all popular 6" and 8" jointers with cabinet stands. Both units feature a 4" outlet.

(for Shop-Vac®

and Sears®)

UNIVERSAL ADAPTER REDUCERSSeven step adapter provides a multitude of dust collection reducing options. Simply cut away unneeded steps with a hacksaw. Outside diameter step sizes include 1", 2", 21⁄2", 3", 4", 5" and 6". Wall thickness is 1⁄8".

DUST COLLECTION BASICS BOOK

FLOOR SWEEP

ADAPTERS

JOINTER DUST HOODS

This incisive book skillfully guides the woodworker through all the steps necessary in the design and construction of an efficient central dust collection system and tells you what you need to know for easy installation. The text offers practical hints and techniques and takes the mystery, misery and hype away from a subject that should be as clear as the air you breathe. Fifty pages of concise, carefully illustrated text. A MUST!

HOSE CLAMPS WIRE HOSE CLAMPSWe are the largest supplier of Blast Gates in the USA! Two types available:

BLAST GATES

PLASTIC

ALUMINUM

(for Shop-Vac® & Sears®). 4" x 35⁄8" Flange size, 21⁄2" Port size.

21⁄2" UNIVERSAL DUST PORT

QUICK DISCONNECT FITTING

HOSE ADAPTERAdapt 21⁄2" hose to fit Shop-Vac® openings.

These hoods can be easily adapted to mount directly under the blade on most contractor type table saws with open stands. 4" outlet.

TABLE SAW DUST HOODS

T-FITTINGS

ELBOWS—90° SPLICES

Y-FITTINGS

Install these sweeps at different locations in your shop and fight over the broom at the end of the day. 21" wide sweep. 4" outlet.

W1003 ONLY $550

MODEL SIZE PRICE

W1025 2" 50¢W1313 21⁄2" 75¢W1021 3" 50¢W1022 4" 50¢W1023 5" 65¢

MODEL SIZE PRICE

W1315 2" 50¢W1314 21⁄2" 50¢W1316 3" 50¢W1317 4" 75¢W1318 5" 75¢

MODEL SIZE PRICE

W1319 6" $150

D3598 7" $150

D3599 8" $150

D3600 9" $150

MODEL SIZE PRICE

W1024 6" 75¢D3602 7" 95¢D3603 8" $150

D3604 9" $150

W1050 ONLY $575

4"—10-pk.H5710 ONLY $500

4"—10-pk.H5357 ONLY $750

MODEL SIZE PRICEW1006 3" OD $250

W1007 4" OD $595

W1008 5" OD $675

W1009 6" OD $825

MODEL SIZE SALEW1141 3" OD $795

W1142 4" OD $1125

MODEL SIZE PRICE

W1014 3" x 3" x 3" OD $350

W1015 4" x 4" x 4" OD $525

T20559 4" x 4" x 21⁄2" OD $850

MODEL SIZE PRICE

W1016 3" OD–90° $295

W1017 4" OD–90° $525

MODEL SIZE PRICE

W1018 3" x 3" OD $175

W1019 4" x 4" OD $275

MODEL SIZE PRICE

W1012 3" x 3" x 3" OD $295

W1013 4" x 4" x 4" OD $495

MODEL SIZE PRICE

W1038 4" ID x 4" OD $350

MODEL SIZE PRICE

W2046 21⁄4" x 21⁄2" $395

MODEL SIZE PRICE

W1039 91⁄2" x 6" $750

MODEL SIZE PRICE

W1001 81⁄4" x 81⁄4" $225

W1002 87⁄16" x 101⁄4" $275

MODEL SIZE PRICE

W1041 3" x 21⁄2" OD $125

W1044 4" x 21⁄2" OD $125

MODEL SIZE PRICE

W1042 3" x 21⁄2" $375

MODEL SIZE PRICE

W1004 121⁄4" x 121⁄4" $395

W1005 14" x 14" $475

MODEL SIZE PRICE

W1020 3" x 2" OD 95¢W1011 4" x 3" OD $125

W1037 5" x 4" OD $425



BLAST GATES

PLASTIC

Choose plastic or aluminum. Threaded Blast Gates screw onto flexible hose.

ALUMINUM

Hood measures 8" x 73⁄4" with flip-up front guard and 4" dust port. Adapts to most lathes.

Easily mounts to router table or shaper table.

Use to make an easy dust port. Flange measures 55⁄8" diameter.

Angled dust port efficiently directs air flow. Flange dimensions are 43⁄8" W x 79⁄16" L.

Simply cut off what you don't need to connect hoses of different sizes.

Sized for 5-gal. buckets. Position in-line before your shop vacuum to capture more dust. 21⁄2" ports.

Swivel design allows for up to a 20° direction change for duct work design flexibility.

DUST COLLECTOR ADAPTER

4" CONNECTOR

Mount 21⁄2" to 6" blast gates to any stable surface. No tools required. Includes mounting screws.

BLAST GATE HOLDER

TAPER OVAL NOZZLE

21⁄2" TAPER DUST PORTT-FITTING

SPLICES

ELBOWS

REDUCERS

LATHE DUST HOODY-FITTING CYCLONE SEPARATOR

Threaded hose connections and friction fits for quick attachment to standard dust ports.

QUICK COUPLERS

Adapt your dust collector with a 6" inlet into two 4" inlets.

FLANGE ELBOW ANGLE DUST PORT

TAPER ADAPTER

Round end is 21⁄2" OD Oval nozzle measures 21⁄8" x 3⁄4".

Fits 4" hose. Flange dimension is 45⁄8" x 45⁄8".

SWIVEL BALL JOINTS

UNIVERSAL ADAPTERS 21⁄2" DUST PORTS

Add a 21⁄2" dust port to any machine. Flange measures 33⁄4" diameter.

MODEL SIZE PRICED4224 21⁄2" OD $250

D4254 4" OD Threaded One Side $525

D4255 4" OD Threaded Both Side $550

MODEL SIZE PRICED4253 21⁄2" OD $1095

D4252 4" OD $1495

MODEL SIZE PRICE

D4246 21⁄4" ID x 21⁄2" OD $150

D4230 3" ID x 3" OD $225

D4261 4" ID x 4" OD $295

D4231 4" ID x 21⁄2" OD $295

D4232 4" ID x 3" OD $295

D4233 5" ID x 4" OD $295

MODEL SIZE PRICE

D4238 21⁄2" x 11⁄4" OD $195

D4226 4" x 2" OD $195

D4250 4" x 2" OD Tapered $195

D4225 4" ID x 21⁄4" OD Eccentric $195

MODEL SIZE PRICE

D4227 21⁄2" OD $125

D4228 4" OD Left Thread to Taper $275

D4257 4" OD Right Thread to Taper $275

D4263 4" OD Left Thread to Straight $295

MODEL SIZE PRICE

D4229 21⁄2" x 21⁄2" x 21⁄2" OD $295MODEL SIZE PRICE

D4249 4" OD x 21⁄4" OD $195MODEL SIZE PRICE

D4259 21⁄2" OD $195

MODEL SIZE PRICE

D4234 21⁄2" x 21⁄2" x 21⁄2" OD $295MODEL SIZE PRICE

D4241 12" $1395MODEL SIZE PRICE

D4243 4" $2295

MODEL SIZE PRICED4258 21⁄2" OD x 21⁄8" x 3⁄4" $250

MODEL SIZE PRICED4239 4" $250

MODEL SIZE PRICED4262 55⁄8" $350

MODEL SIZE PRICE

D4223 45⁄8" OD $595

MODEL SIZE PRICE

D4240 6" ID x 4" OD $595

MODEL SIZE PRICE

D4235 21⁄2" OD—90° $295

D4256 4" OD—45° $375 MODEL SIZE PRICE

D4236 2", 11⁄2", 11⁄4" & 21⁄2" Port $275

D4251 1", 2", 21⁄2", 3" & 4" OD $275

MODEL SIZE PRICE

D4248 4" ID x 21⁄2" OD $1050

D4245 4" ID x 4" OD $995

MODEL SIZE PRICE

D4247 21⁄2" Low Profile $195

D4237 21⁄2" ID x 211⁄16" OD Router $195

D4260 ONLY $575

221-800-523-4777

FREE760 PAGE

2014 CATALOGMILLING MACHINESMINI HORIZONTAL/VERTICAL MILLFEATURES:• Easily converts for either vertical or horizontal milling• Dovetail ways for accuracy • 3-Axis table movement• Variable speed • Emergency stop button• Heavy-duty cast iron construction• Compact design mounts to workbench or stand

SPECIFICATIONS:• Motor: 1⁄2 HP, DC, 110V, single-phase• Spindle taper: R-8

• T-slots: 3 @ 1.33" centers, 7⁄16" wide• Head tilt: 50° left and right• Max. distance spindle to table: 61⁄2"• Horizontal spindle size: 5⁄8"• Table travel (longitudinal): 117⁄8"• Table travel (cross): 311⁄16"• Table size: 43⁄4" x 181⁄8"• Range of speeds: variable, 200–2200 RPM• Approximate shipping weight: 268 lbs.

MILL/DRILL WITH STANDFEATURES:• Fine down feed is engaged by clutch-type mechanism• Easy-to-use depth stop• Heavy-duty, 12-speed tapered roller bearing spindle• Forward/Reverse switch with emergency stop

SPECIFICATIONS:• Motor: 2 HP, 110V/220V, prewired 220V,

single-phase• Spindle taper: R-8• Spindle travel: 411⁄16"• Swing: 151⁄2"• Max. distance spindle to table: 175⁄16"

TOOLS AND TOOLBOX INCLUDED

• Column size: 41⁄2"• Collars calibrated: 0.002"• T-Slots: 3 @ 21⁄2" centers, 5⁄8" wide• Table size: 81⁄4" x 283⁄4"• Table travel (longitudinal): 1911⁄16"• Table travel (cross): 71⁄2"• Drilling capacity: 13⁄16"• Number of speeds: 12• Spindle speed:140–2436 RPM• Approximate shipping weight: 750 lbs.

MILL/DRILL WITH VARIABLE SPEED POWER FEEDFEATURES:• Exclusive fine downfeed is graduated in 0.001" and is

engaged by clutch-type mechanism• Heavy-duty, 12-speed tapered roller bearing spindle• Push-button switch with thermal overload protection• Top quality workmanship throughout

SPECIFICATIONS:• Motor: 2 HP, 110V/220V, 18A/9A, single-

phase, prewired 110V• Spindle taper: R-8• Spindle travel: 5"• Swing: 157⁄8"• Max. distance spindle to table: 18"

• Column size: 41⁄2"• Collars calibrated: 0.001"• T-Slots: 4 @ 21⁄16" centers, 5⁄8" wide• Table size: 91⁄2" x 32"• Table travel (longitudinal): 231⁄2"• Table travel (cross): 7"• Number of speeds: 12• Range of speeds: 150, 225, 255, 350, 400,

500, 850, 1200, 1500, 1600, 2300, 3000 RPM• Approximate shipping weight: 680 lbs.

DELUXE SMALL MILL/DRILLFEATURES:• Dovetail column with elevation handwheel graduated in 0.0005"• Over 14" of headstock movement • Dovetail column• Digital spindle scale reads metric or inches, zero set, ON/OFF• Head tilts 90° • Push button variable speed• Digital speed display• Reversing buttons on the spider handles for tapping• Coolant trough • Front-mounted fine feed knob• Push button motor control for forward, reverse, tapping, and off• Front-mounted E-stop button • See-through chip guard• Includes 5⁄8" drill chuck & arbor, 2 T-nuts, 3 open end combo wrenches, 4 hex wrenches

SPECIFICATIONS:• Motor: 1 HP, 110V, single-phase,

brushless DC• Spindle taper: R-8• Spindle travel: 23⁄4"• Swing: 18"• Max. distance spindle to table: 143⁄4"• Collars calibrated: 0.001"

• T-Slots: 3 @ 111⁄16" centers, 7⁄16" W• Table size: 61⁄4" x 215⁄8"• Table travel (longitudinal): 15 7⁄8"• Table travel (cross): 53⁄4"• Headstock travel: 147⁄8"• Quill diameter: 2.362"• Variable speed: 100–1750 RPM• Approximate shipping weight: 418 lbs.

SPECIFICATIONS:• Motor: 11 ⁄ 2 HP, 110V/220V, single-phase, 1720 RPM, prewired 110V • Spindle taper: R-8 • Spindle travel: 5"• Face mill capacity: 3" • End mill capacity: 3⁄4"• Swing: 201 ⁄ 2"• Max. distance spindle to table: 16"• Head swivel: 360° • Head tilt: 90° L, 30° R

Heavy-duty cast iron construction and high quality manufacturing ensure precise milling, drilling, and tapping. Gear-head enables you to change speeds quickly. Head tilts for angled or horizontal milling and drilling. Table rides on wide, precision dovetails and comes complete with power feed. You won’t find a mill/drill anywhere else at this price that is as versatile and complete!

GEAR-HEAD MILL/DRILL

• T-slots: 4 at 21 ⁄ 8" centers, 5⁄ 8" wide• Table size: 91 ⁄ 2" x 32"• Table travel (longitudinal): 201 ⁄ 2", (cross): 9" • Spindle speeds: 65, 130, 220, 480, 925, and 1550 RPM• Approximate shipping weight: 705 lbs.

$99$99shipping


G0619 $1850.00 SALE $179500$99$99


$179shipping


$150$150shipping


$150$150shipping



METAL LATHES

10" x 22" BENCH TOP METAL LATHE

SPECIFICATIONS:• Swing over bed: 95⁄8"• Swing over cross slide: 61⁄8"• Distance between centers: 22"• Spindle bore: 1"• Spindle thread: 13⁄4" x 8 TPI• Spindle taper: MT#4• Motor: 1 HP, 110V, single-phase• Number of speeds: 6• Range of speeds: 150, 300, 560, 720, 1200, 2400 RPM• Leadscrew: 3⁄4"–12 TPI• Compound travel: 31⁄2"• Cross slide travel: 61⁄2"• Carriage travel: 181⁄2"• Maximum tool size: 1⁄2"• Tailstock barrel travel: 21⁄2"• Tailstock barrel taper: MT#3• Number of longitudinal feeds: 9• Range of longitudinal feeds: 0.0023–0.013 in./rev.• Number of inch threads: 33• Range of inch threads: 8–72 TPI• Number of metric threads: 26• Range of metric threads: 0.25–3.5mm• Overall dimensions: 46" L x 22" W x 165⁄8" H• Approximate shipping weight: 432 lbs.

INCLUDED ACCESSORIES:• 5" 3-Jaw chuck with two sets of jaws• 61⁄2" 4-Jaw chuck with reversible jaws• 8" Faceplate• Steady rest with 1⁄4"–2" capacity

SOUTH BEND 8K®, 8" X 18" LATHESPECIFICATIONS:• Swing over bed: 8"• Distance between centers: 18" • Swing over cross slide: 5"• Swing over saddle: 5"• Cross slide travel: 31⁄4" • Compound travel: 25⁄8"• Carriage travel: 175⁄8"• Spindle nose: D1-3• Spindle bore: 11⁄8" • Spindle taper: MT#3• Spindle speeds: 50–2300 RPM• Tailstock taper: MT#2• Tailstock barrel travel: 13⁄4"• Tailstock barrel diameter: 13⁄16"• Inch threads: (12) 10–32 TPI• Metric threads: (12) 0.4–3.0mm• Number of feed speeds: 9• Longitudinal feed range:

0.003–0.0051 in./rev.• Voltage/phase/amps: 120V,

single-phase, 10A• Spindle motor: 11⁄2 HP• Overall size: 40" W x 19" H x 18" D• Approximate shipping weight: 282 lbs.FEATURES:• Hardened and ground signature

South Bend three V-way bed• Electronic variable-speed controls• Threading dial indicator• Emergency stop button• Inch and metric graduations on tailstock barrel as well as

handwheel collars

INCLUDED ACCESSORIES: • 4" 3-Jaw chuck with back plate &

reversible jaws• 4-Way tool post• MT#4.5–MT#3 spindle sleeve• MT#2 dead center for tailstock• MT#3 dead center for headstock• Complete set of change gears• Hex wrench set• Oil gun• Tailstock locking wrench• Toolbox

Smooth and Quiet Belt-Drive System

• Follow rest with 1⁄4"–2" capacity• MT#3 dead center• 4-Way tool post• Chip tray and backsplash• Hardened & ground V-way bed• Oil-bath gearbox• Toolbox with service tools

G0602 $1250.00 SALE $122500$99$99


SB1001 $3265.00 SALE $196500$99$99

shipping

lower 48 states

241-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

METAL LATHES

14" x 40" GUNSMITH'S LATHESPECIFICATIONS:• Swing over bed: 14" • Swing over gap: 193⁄4"• Swing over cross slide: 813⁄16"• Distance between centers: 40"• Bed width: 73⁄8"• Spindle nose taper: MT#5 • Spindle nose: D1-5 camlock• Spindle bore: 19⁄16" • Spindle length: 17"• Spindle length with 3-Jaw chuck: 217⁄8"• Spindle length with 4-Jaw chuck: 211⁄4"• Spindle length with faceplate: 181⁄2"• Cross slide travel: 611⁄16"• Compound travel: 39⁄16"• Tailstock barrel taper: MT#3 • Tailstock barrel travel: 315⁄16"• Motor: 2 HP, 220V, single-phase, 10A, 60 Hz, 1725 RPM• Number of speeds: 8• Range of speeds: 70, 115, 190, 300, 460, 755, 1255, 2000 RPM• Overall dimensions: 711⁄2" L x 263⁄16" W x 52" H• Approximate shipping weight: 1550 lbs.

STANDARD EQUIPMENT:• 6" 3-Jaw chuck with reversible jaws• 8" 4-Jaw chuck with independent jaws• 11" faceplate• Steady rest/follow rest• Full length splash guard• Quick change tool post with 2 tool holders• Two MT#3 dead centers (1 carbide-tipped)• One MT#3 live center• One MT#5–MT #3 sleeve• Pull out chip pan• 1⁄2" drill chuck with M #3 arbor• Toolbox

12" x 36" GUNSMITH'S LATHE WITH STANDSPECIFICATIONS:• Swing over bed: 12"• Swing over gap: 17"• Swing over cross slide: 7"• Distance between centers: 36"• Bed width: 71⁄4"• Spindle bore: 40mm• Spindle nose taper: MT#5• Spindle nose: D1-5 Camlock• Spindle length: 17"• Spindle length with 3-Jaw chuck: 213⁄4"• Spindle length with 4-Jaw chuck: 211⁄4"• Spindle length with faceplate: 181⁄2"• Cross slide travel: 61⁄4"• Compound travel: 31⁄4"• Tailstock barrel taper: MT#3• Tailstock barrel travel: 4"• Motor: 2 HP, 220V, single-phase, 8.5A,

60 Hz, 1725 RPM• Number of speeds: 9• Range of speeds: 70, 200, 220, 270, 360,

600, 800, 1000, 1400 RPM• Height without stand: 23"• Height with stand: 541⁄2"• Length with stand: 61"• Width of stand: 26"• Approximate shipping weight: 1330 lbs.

STANDARD EQUIPMENT:• 6" 3-Jaw chuck with 2 sets of

jaws• 8" 4-Jaw chuck with reversible

jaws• 10" faceplate• Steady rest/follow rest with

roller tips• Full length splash guard• Cast iron stand with extended

base• 200 Series quick change tool

post with included holder• Two MT#3 dead centers

(1 carbide-tipped)• One MT#3 live center• Set of six change gears• 1⁄2" chuck with MT#3 arbor• Toolbox

G0709 $4550.00 SALE $439500$255$255


$255$255shipping

lower 48 statesG4003G $3250.00 SALE $319500

25 grizzly.com®




METAL LATHES

16" X 40" ELECTRONIC VARIABLE SPEED LATHEThis is one of the best Taiwanese lathes to hit the states. It has all the mass and rigidity needed for the modern machine shop. Match the optimum cutting speed for any material with just a turn of the dial. Variable-speed spindle control with a range of 20–2500 RPM and a digital readout offers absolute control of surface speeds. Besides having a variable speed, the cross slide is fitted with electronic control over the spindle. Flip the switch and this CSS feature will automatically adjust the spindle speed up or down to suit the diameter of cut. An excellent way to maintain finishes and maximize tool life! This lathe also features precision hardened and ground ways, extra-heavy tailstock casting with lots of barrel stroke, and a universal quick-change gearbox. And it’s built to last! Pressurized lubrication in the headstock means the hardened and ground gears will give you smooth, trouble-free operation under the most demanding work load. This machine also has an adjustable drive clutch in the gearbox for safety. Adjust it higher for those harder steels and knurling, or back it off for a measure of safety when working up close and personal with those delicate internal shoulders. This is truly a fine machine!

FEATURES:• Yaskawa frequency drive• Dial controlled, variable spindle

speeds with digital readout• Precision hardened and ground V-way

bed is made of Meehanite casting• Totally enclosed universal gearbox

allows cutting of inch, metric, whitworth, modular and diametral pitches

• Headstock gears and bearings are lubricated with 1⁄4 HP oil pump

• 1⁄8 HP, 0.3A coolant motor

STANDARD EQUIPMENT:• 9" 3-Jaw scroll chuck• 10" 4-Jaw independent chuck• 12" Faceplate • Steady rest• Follow rest • Coolant system• Halogen light • Pull-out chip tray• Dual inch/metric dials• Jog button & emergency stop• #6 to 4 Morse taper spindle nose sleeve• Centers, center sleeve, service tools,

manual and toolbox

SPECIFICATIONS:• Swing over bed: 16.14"• Swing over gap: 22.95"• Swing over cross slide: 10.39"• Distance between centers: 40"• Spindle nose: D1-6 camlock• Spindle nose taper: MT#6• Spindle bore: 2.06"• Tailstock barrel taper: MT#4• Tailstock barrel travel: 6"• Cross slide travel: 8.6"• Compound travel: 5.1"• Motor: 5 HP, 220V, 3-phase,

Yaskawa frequency drive• Number of speeds: Variable• Speed range: 20–400, 400–2500 RPM• Range of threads (inches):

45 @ 2–72 TPI• Range of threads (metric):

39 @ 0.2–14mm• Diametral pitch range: 21 @ 8–44 DP• Modular pitch range: 18 @ 0.3–3.5 MP• Width of bed: 10.23"• Approximate shipping weight: 3694 lbs.

MADE IN TAIWAN

14" X 40" HIGH-PRECISION TOOLROOM LATHEThis full-featured 14" x 40" High-Precision Toolroom Lathe is equipped with just about everything needed to get a machine shop up and running—just add your own tooling! Hardened and precision-ground oil-bath lubricated gears and high quality spindle bearings are built to withstand heavy turning, yet hold tight tolerances for precision work. Cuts a wide range of inch/metric threads and modular/diametral pitches.

FEATURES:• Hardened and precision-ground bed

with Meehanite castings• Halogen worklight • 4-way tool post• Complete coolant system• Micrometer carriage stop• Threading dial indicator• Full-length splash guard• Front removable sliding chip tray• Headstock gears run in an oil bath• Jog button and emergency stop• Safety chuck guard• Completely enclosed universal

gearbox for cutting inch, metric, modular and diametral pitches

STANDARD EQUIPMENT:• 8" 3-Jaw scroll chuck D1-5• MT#5 to MT#3 spindle sleeve• 10" 4-Jaw independent chuck D1-5• 10" Faceplate D1-5• Follow rest • Service tools• Six leveling pads• Steady rest with roller bearing tips• Toolbox • Two MT #3 dead centers (1 carbon steel and 1 carbide-tipped)

SPECIFICATIONS:• Swing over bed: 14.17"• Swing over gap: 20.94"• Swing over cross slide: 8.66"• Distance between centers: 40"• Spindle nose: D1-5 camlock• Spindle nose taper: MT#5• Spindle bore: 1.57"• Tailstock barrel taper: MT#3• Tailstock barrel travel: 1.968"• Cross slide travel: 7"• Compound travel: 4"• Motor: 5 HP at 3450 RPM, 2.5 HP at

1725 RPM, 220V, 3-phase• Spindle speeds: (16) 50–2570 RPM• Range of threads (inches):

45 @ 2–72 TPI• Range of threads (metric):

39 @ 0.2–14mm• Diametral pitch range: 21 @ 8–44 DP• Modular pitch range: 18 @ 0.3–3.5 MP• Width of bed: 9"• Approximate shipping weight: 2685 lbs.

MADE IN TAIWAN

G0670 $14,995.00 SALE $13,50000$495$495


G0740 $12,995.00 SALE $11,99500$355$355


26

As many of you know, the President of Grizzly has been an active Long Range competitive shooter who has been the Captain of the US Team for a few years.

We have been selling shooting related products for several years and have decided to increase that selection to serve the tens of thousands of competitive and recreational shooters out there. Although we have produced a catalog of these products we have a huge selection in stock that can be viewed at Bullets.com.

With our large warehouse and over 1.2 million square feet of space, our product knowledge and our connections within the industry, we are able to offer an excellent selection at really good prices.

Please visit Bullets.com for all your shooting needs.

We ship 99% of all orders the same day.

Brands In Stock

A DIVISION OF GRIZZLY INDUSTRIAL®, INC.

TEAM GRIZZLY SETS NEW USA NATIONAL RECORD AT 800, 900, & 1000 YDS

FEBRUARY 6, 2014

Team Grizzly shot brilliantly at Berger SW Nationals and set a National record at 800, 900, and 1000 yds. The team composed of Shiraz Balolia, Kenny Adams, Alex Lipworth, John Myers and coached by Trudie Fay, scored 1786 with 104 Xs beating the existing 800, 900, and 1000 Palma course National record by five points and ten Xs! These top-level competitors continue to set records and win National titles!

271-800-523-4777

760 PAGE2014 CATALOG


RIFLE BARRELS

We are pleased to offer top quality Bartlein match rifle barrels in the most popular sizes. Bartlein stainless steel barrels are the choice of champions worldwide and are used by numerous members of the US Team. Many national records have been set using these barrels; In fact, the President of Grizzly has set several national records in F-Class shooting.

Bartlein’s precise machining and 5R grooving process increases accuracy and reduces copper build-up. Their custom built CNC machines are the most modern in the industry and there is generally a long wait to get a barrel from them. We place huge orders many months ahead of time and stock these barrels so you can get working on your favorite project immediately. We stock the popular sizes listed below at all three of our locations.

THE PRESIDENT’S NATIONAL RECORD SETTING RIFLE CHAMBERED IN 6XC WITH A BARTLEIN BARREL

BARTLEIN MATCH RIFLE BARRELS

These rifle barrels cannot be shipped out of the USA.

Shown to the left is the record setting target shot by the President of Grizzly. He is also a past Captain and current member of the US F-Class Open Rifle Team.The national record he set on 4/26/08 was an absolute perfect score of 200 with 20 Xs, plus 6 more Xs.

MODEL CALIBER TWIST LENGTH CONTOUR BORE / GROOVE PRICE

T10224 6mm 5R 1–8 28" Finished 1.250" x 5.000" Straight, Taper to 0.940" .237 / .243 $32500


T10226 6mm 5R 1–7.5 28" Finished 1.250" x 5.000" Straight, Taper to 1.000" .237 / .243 $30600

T10227 6mm 5R 1–7.5 30" Finished 1.250" x 5.000" Straight, Taper to 1.000" .237 / .243 $35500

T10480 6mm 5R 1–8 26" Finished #13 Rem. Varmint 1.250" x 2.000" Taper to 0.950" (4.65 lbs.) .237 / .243 $35900

T10481 6mm 5R 1–8 30" Finished #11 Medium Palma 1.250" x 2.500" Taper to 0.820" (5.35 lbs.) .237 / .243 $37500

T10820 6mm 4 Groove, 1–8 30" Finished 1.250" Straight All The Way .237 / .243 $37500

T10822 6mm 4 Groove, 1–8 30" Finished #9 HV 1.250" x 5.000" Taper to 0.900" (7.45 lbs.) .237 / .243 $37500

T10474 6mm 4 Groove, 1–13.5 23" Finished #16 1.200" x 2.000" Straight, Taper to 0.900" (5.7 lbs.) .237 / .243 $35900

T10482 6mm 4 Groove, 1–14 23" Finished #16 1.200" x 2.000" Straight, Taper to 0.900" (5.7 lbs.) .237 / .243 $35900

T10821 6mm 5R 1–8 30" Finished 1.250" Straight All The Way .237 / .243 $37500

T10228 6.5mm 5R 1–8.5 30" Finished 1.250" x 5.000" Straight, Taper to 1.000" .256 / .264 $34500

T10229 6.5mm 5R 1–8.5 30" Finished 1.250" Straight All The Way .256 / .264 $34500

T10475 6.5mm 5R 1–8.5 26" Finished #14 1.200" x 3.000" Straight, Taper to 0.900" (6.2 lbs.) .256 / .264 $35900

T10476 6.5mm 5R 1–8.5 26" Finished #13 Rem. Varmint 1.250" x 2.000" Taper to 0.950" (4.65 lbs.) .256 / .264 $36900

T10477 6.5mm 5R 1–8.5 30" Finished #11 Medium Palma 1.250" x 2.500" Taper to 0.820" (5.35 lbs.) .256 / .264 $39500

T10563 6.5mm 5R 1–8 26" Finished #3 Sporter, 1.200" x 2.750" Taper to 0.670" (3.50 lbs.) .256 / .264 $33500

T10601 6.5mm 5R 1–8 30" Finished Medium Palma Contour 1.250" x 2.500" Taper to 0.820" (5.35 lbs.) .256 / .264 $36500

T10602 6.5mm 5R 1–8 30" Finished Heavy Palma, 1.250" x 3.000" Taper to 0.900" (6.50 lbs.) .256 / .264 $36500

T10603 6.5mm 5R 1–8 30" Finished 1.250" Straight All The Way .256 / .264 $36500

T10564 7mm 5R 1–9 26" Finished #3 Sporter, 1.200" x 2.750" Taper to 0.670" (3.50 lbs.) .277 / .284 $34500

T10604 7mm 5R 1–9 30" Finished 1.250" Straight All The Way .277 / .284 $36500


T10557 7mm 5R 1–9 32" Finished 1.250" Straight Cylinder .277 / .284 $39500


T10232 .30 Cal 5R 1–12 30" Finished Medium Palma 1.250" x 2.500" Straight, Taper to 0.820" (5.35 lbs.) .299 / .308 $35500

T10233 .30 Cal 5R 1–13 30" Finished Medium Palma 1.250" x 2.500" Straight, Taper to 0.820" (5.35 lbs.) .299 / .308 $34500

T10823 .30 Cal 1–17 28" Finished #9 HV 1.250" x 5.000" Taper to 0.900" (7.45 lbs.) .300 / .308 $36500

T10565 .308 5R 1–10 26" Finished #3 Sporter, 1.200" x 2.750" Taper to 0.670" (3.50 lbs.) .300 / .308 $34500

T10478 .308 Cal 5R 1–11.25 26" Finished #14 1.200" x 3.000" Taper to 0.900" (6.20 lbs.) .299 / .308 $35900

T10479 .308 Cal 5R 1–11.25 26" Finished #13 Rem. Varmint 1.250" x 2.000" Taper to 0.950" (4.65 lbs.) .299 / .308 $36900

T10560 .308 5R 1–10 30" Finished 1.250" x 5.000" Taper to 0.900" .300 / .308 $36500

T10483 .338 5R 1–9.5 28" Finished #9 HV 1.250" x 5.000" Taper to 0.900" (7.45 lbs.) .330 / .338 $36500

T10566 .338 5R 1–10 26" Finished #4 Sporter, 1.200" x 2.750" Taper to 0.750" (4.50 lbs.) .330 / .338 $34500

T10558 .338 5R 1–9.5 30" Finished Oversize 1.350" x 5.000" Taper to 1.000" .330 / .338 $46500

T10559 .338 5R 1–9.5 30" Finished 1.250" x 5.000" Taper to 0.900" .330 / .338 $37500

T10561 50 BMG 8 Groove, 1–15 36" Finished 1.750" At Breech Tapering to 1.250" at Muzzle .500 / .510 $66500

T10562 50 BMG 8 Groove, 1–15 36" Finished 2.000" Straight All The Way .500 / .510 $66500

$1200

281-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

AIR COMPRESSORSHEAVY-DUTY 1-GAL. QUIET TRIM COMPRESSOR C1010• 0.75 SCFM delivered at 90 PSI, 1 gallon tank & 135 PSI max• Durable, long life maintenance-free pump for ease of use• Low 71 dBA for quiet operation,

2.6 Amp draw for easy start up and reduced breaker tripping

• High-flow regulator for max. performance

• Light weight (23 lbs.) and compact design (9" tall)

OIL-LESS

• Oil-free pump design for reliability and no maintenance

• Low Amp 120V motor • 165 PSI pressure for longer tool run time

• 2.6 SCFM delivered at 90 PSI• 4-Gallon pancake-style, stable

tank with water drain valve and rubber feet • 2.6 SCFM at 90 PSI for fast recovery time (*per ISO1217) • Includes compressor, operating manual, and limited one-year warranty • Weighs 32 lbs.

165 PSI 4.5 GAL. OIL-FREE PANCAKE COMPRESSOR C2004

UMC PANCAKE COMPRESSOR KIT C2002-WKOIL-LESS

The C2002-WK includes 13-Piece Accessory Kit—25' x 1⁄4" PVC air hose with coupler and plug assembled, tire chuck with plug assembed, blow gun with plug assembled, tire gauge, OSHA safety nozzle and 4 inflator adapters.

• 5 SCFM @ 90 PSI and 200 PSI max operating pressure for improved tool performance • Large 4.5-gallon tank for multi-tool use • High efficiency motor for easy start up in cold weather and when using an extension cord • High flow regulator and couplers to maximize nailer performance • 78 dBA operational noise level for a quiet work environment • 10" non-flat tires allow for easy jobsite maneuverability • Roll cage and top cover protect vital compressor components • Approx. shipping weight: 91 lbs.

4.5-GAL. 200 PSI COMPRESSOR CAP1645-OF

• Oil-lubricated, cast iron cylinder compressor for long lasting, reliable performance

• Easy portability, contractor grade, delivers 3.7 CFM @ 90 PSI

• 120 PSI max• Weighs 58 lbs.

4-GAL. TWIN STACK COMPRESSOR HL5402

OIL-LUBE

• Longer life cast iron, pump— twin cylinder oil-lubricated pump

• Operates on standard 120V• Space saving ASME 30-gallon vertical

tank • Large 10" semi-pneumatic wheels for easy portability

• Powerful 2 (running) HP motor (per ISO1217 standards); 5.5 SCFM @ 90 PSI; 135 max PSI • Weighs 196 lbs.

30-GAL. CAST IRON VERTICAL COMPRESSOR VT6358

OIL-LUBE

3.2 HP, 60-GAL. CAST IRON COMPRESSOR VT6275

TWO-STAGE 120-GAL. COMPRESSOR CE8001

• 60-gallon ASME air tank• 3.2 (running) HP• Runs on 220V, single phase• Comes complete with pressure switch,

pressure gauge and relief valve• Oil lubricated • Belt driven• Delivers 11.8/10.3 CFM at 40/90 PSI• 66" tall • Weighs 265 lbs.

• 5 (running) HP, 230V motor with overload protection • Solid two-stage cast iron pump delivers up to 175 PSI

• 10,000 hours of pump life (based on B-10 bearing rating)

• Oil sight glass allows quick oil level checks • The 80-gallon ASME code tank certified for 200 PSI maximum pressure • Weighs 415 lbs.

80-GAL. CAST IRON COMPRESSOR HS5180

OIL-LESS

OIL-LESS OIL-LESS

This two-stage air compressor is designed and constructed for heavy-duty commercial and industrial applications. It features a cast iron, oil-lubricated pump with stainless steel valves, ductile-iron crankshaft, ball bearing construction, oil sight glass, and precision balanced flywheel. The pump operates at low RPM and delivers up to 15,000 hours of pump life based on B-10 bearing life. The 120-gallon tank is ASME Code and certified for 200 PSI maximum pressure. It includes safety valve and manual tank drain. Weighs 880 lbs.

• 10 HP (running)• 208–230/460 volt AC• 3-phase• Magnetic starter• 37.6 CFM at 90 PSI• 175 maximum PSI• Solid cast iron pump

• Oil lubricated• 3⁄4" tank outlet• ASME, NEMA certified• Overall dimensions:

29.5" L x 78" W x 56" H

20-GAL. VERTICAL COMPRESSOR HU502000AV• 20-Gallon ASME tank rated for 150 PSI• Delivers 3.8 CFM @ 90 PSI• Oil-less pump requires minimal

maintenance• Easy access regulator knob and

gauges keeps controlling and monitoring simple

• Weighs 95 lbs.

• 200 PSI max. pressure • 5 SCFM at 90 PSI • 1.6 HP running

• 15-Gallon tank • Oil-free, long life pump • Roll cage

• ASME certified tank• Dashboard control panel • Low

noise (78 dB) • Ball drain valve• Approximate shipping weight: 103

lbs.

200 PSI HIGH PRESSURE 15-GAL. COMPRESSOR D55168

T22431 $134.95 SALE $10995 T22612 $169.95 SALE $15995 T22188 $199.95 SALE $17995

H9381 $389.95 SALE $36995 T24155 $299.95 SALE $27995

T21276 $2995.95 SALE $289500

$49$49shipping

lower 48 states

$179$179shipping

lower 48 states

T24154 $190.95 SALE $17995

T24156 $624.95 SALE $59500

$79$79shipping

lower 48 states

T22706 $389.95 SALE $36995

G5396 $642.95 SALE $59995

$99$99shipping

lower 48 states

T24157 $1199.95 SALE $99500

$99$99shipping

lower 48 states

$79$79shipping

lower 48 states

$49$49shipping

lower 48 states

29 grizzly.com®




AIR TOOLS & SPRAY GUNS33' RETRACTABLE HOSE REEL 3⁄8" X 50' HOSE REELThis handy Hose Reel can be mounted on the wall or ceiling! The shell is made of impact-resistant polyethylene, which completely covers the hose when not in use. Features cloth reinforced 1⁄4" hose, a working pressure of 180 PSI, and 1⁄4" NPT pipe threads. 33 feet long.

• Heavy-duty rubber air hose• Heavy-gauge, all-steel reel assembly• 8-position ratchet gearing

locks reel at desired hose length

• Slotted mounting base

• 5-position adjustable roller outlet arm

• 1⁄4" NPT hose connection• Maximum 300 PSI• 25 CFM air flow

3⁄8" X 50' HOSE REELOur professional-quality auto-retractable Hose Reels feature a heavy-duty frame, solid base, and can be mounted horizontally or vertically. The arm can be adjusted to a variety of angles. Each unit includes 3⁄8" heavy-duty air hose and is engineered for daily use. 3⁄8" NPT hose connection. Maximum 250 PSI.

These Heavy-Duty Hand-Crank Hose Reels are the next best thing to the auto-retractable units. Smooth operation and universal mounting options make these a great choice for the non-frequent user. 3⁄8" NPT. 100' capacity.

HAND-CRANK HOSE REEL

Hose not included.

PROFESSIONAL SPRAY GUN—1.5MM TIP (LVLP)Low volume, low pressure gravity feed spray gun with 600ml cup saves material costs and has an adjustable spray pattern and two-stage trigger. Gun disassembles for easy cleaning. Includes extra internal filter, clean up brush and service wrench. 1.5mm fluid tip.

600ml plastic cup is great for large jobs and allows for easy monitoring of fluid level. Sprays a wide variety of finishing materials including waterborne finishes. Multi-ported air cap creates fine atomization. In-line regulator/pressure gauge included. 1.4mm fluid tip. Air consumption: 4.2–7.1 CFM. Inlet air pressure: 29–50 PSI.

PROFESSIONAL SPRAY GUN—1.4MM TIP (HVLP) WITH GAUGE

• 2.0mm nozzle size• 57⁄8" to 77⁄8" pattern width• Suction feed• 1 liter capacity• 4.2–7.1 CFM average air

consumption• 45–60 PSI recommended

air pressure• 1⁄4" NPT inlet• Includes hose connector,

multipurpose wrench and cleaning brush

PROFESSIONAL SPRAY GUN• 2.0mm nozzle size• 71⁄8" to 91⁄8" pattern width• Capacity: 21⁄2 gallons• Consumption: 6-8 CFM• Operating Pressure: Tank=25-30

PSI, Gun=45-60 PSI• Application: For very large

volume projects• Material: Medium to high

solids (lacquers, stains, primers, multicomponent paints, clear coats, acrylics, epoxies).

• Not compatible with water-based materials.

10 LITER PAINT TANK WITH GUN

RAPIDAIR MAXLINE 3⁄4" SYSTEM MASTER KIT

2-quart pressurized paint cup with built-in regulator and hook-type handle. Lightweight spray gun with adjustable spray pattern and two-stage trigger. Great for industrial, farm, or home use where a large volume of material is needed. 5 ft. hose included. 3⁄8" hose with 1⁄4" NPT air inlet. Air consumption: 11 CFM.Required pressure: 35–50 PSI. 1.8mm fluid tip.

PROFESSIONAL SPRAY SET—2.0MM TIP

Couplers sold separately.

Maxline is an industrial compressed air piping system that is fast and easy to install, cost effective, leakproof, and corrosion resistant. Maxline's multi-layer construction can be easily bent by hand and maintain its desired shape, giving a professional appearance with no tubing sag. 100 ft. rolls allow for faster installation times, with fewer joints. Its smooth interior walls will never build up scale or rust, making an efficient air system. Recommended for larger buildings and tubing lengths up to 150' from the air compressor.

Maxline piping can be mounted on wall surfaces, in walls for new construction, and be directly buried under ground or concrete. This system is easily configured and can be remodified.

Maxline fittings are nickel plated brass designed for years of long term performance. Its double O-ring compression design is engineered to be a leakproof system, that can be easily disassembled and reused.

• Operating pressure: 175 PSI at 70°, 140 PSI at 140°• Meets OSHA guidelines• Temperature range: -40°F to 140°F• Compatible with common compressor oils

Maxline Master Kit Contains:• ¾" Tubing 100 ft • 3 Outlets • 2 Tees• ¾" Male NPT Straight• 20 Mount Clips • Tools

H5683 $52.95 SALE $4495

H0614 $34.95 SALE $2995

H7668 $61.95 SALE $5295

H0611 $163.95 SALE $13995T23114 $88.95 SALE $7500

H7667 $54.95 SALE $4695 H7669 $43.95 SALE $3295

H8222 $52.95 SALE $4495 H7671 $63.95 SALE $5495

T24126 $199.95 SALE $17995

301-800-523-4777

FREE760 PAGE

2014 CATALOGNAILERS/STAPLERSAIR PALM NAILERDrive 6d–50d common nails in locations that are too restricted to swing a hammer. Delivers 1000 blows per minute when the Palm Nailer is pressed onto a nail head. Great for fastening joist hangers! Includes a leather cover, wrench and bottle for oil.• Lightweight and

durable aluminum alloy body

• Operating pressure: 50–120 PSI

• Average air consumption: 5 CFM

23-GAUGE 1" PIN NAILER KIT PIN100• Uses 23 ga., 1⁄2"–1" micro pin nails• Automatically adjusts for nail length• Holds 170 nails• Includes 2000 3⁄4" pin

nails, oil, wrenches and carrying case

23-GAUGE 13⁄8" PIN NAILER PIN138• Drives slight head & headless pin nails• Allows for stronger joints• Oil -free piston

design• Sinks largest nail

1⁄32" sub-flush into oak

• Dry fire lock-out• Rear exhaust

21° ROUND-HEAD FRAMING NAILER• Shoots 2"–31⁄2" round head nails with 0.113"–0.131" dia.• Soft nose guard is removable• Safety on nose protects against dry firing when stick is

used up• 21° magazine holds 75 nails• Easy view magazine

lets you see when the stick is almost gone

• Rubberized hand grip• Safety trigger• Includes case, safety

goggles, oil and wrenches

PRESIDENT’S SPECIAL

18-GAUGE BRAD NAILER KIT• Shoots 5⁄8"–2", 18 gauge brad

nails• 60–100 PSI operating pressure• 100 piece nail capacity• 360° adjustable exhaust port• Safety trigger with single-

shot fire mode• Weighs only 3.5 lbs.

and includes a case!

21⁄2" FINISH NAILER• Nail size: 16 ga., 11⁄4"–21⁄2"• Operating pressure: 60–100 PSI• Air inlet: 1⁄4" NPT• Magazine capacity:

74 nails• Cast aluminum body• Includes a 1⁄4" NPT

male quick connect fitting, case, wrenches, safety goggles and oil

• Great for all trim applications

• Weighs 5 lbs.

18GA BRAD NAILERBT1855K• Oil-free operation • Selectable trigger system converts

from sequential to contact operation • Low-nail lockout prevents dry firing • Swivel air fitting with internal filter

• Ultra-quiet rear exhaust w/muffler

• Reversible belt hook with pencil sharpener Dial-A-Depth™

• Lightweight magnesium design

18-GA. 2" BRAD NAILER KIT BN200C

3-PC. FRAMING/BRAD/PALM NAILER KITKit includes a 21° Framing Nailer, 18-Gauge Brad Nailer, Palm Nailer, 1⁄4" NPT quick-connect fittings, hex wrenches, goggles, bottle for oil, & carrying case.Framing Nailer:• Shoots 21° full round head stick nails• Accepts 2"–31⁄2" nail length• 80–110 PSI operating pressure• 60-nail capacity • Weighs 8.36 lbs.Brad Nailer:• Shoots 18-gauge brad nails• Accepts 5⁄8"–2" brad length• 100-brad capacity • Weighs 3.4 lbs.Palm Nailer:• Drives single common nails in close quarters• Weighs 1.87 lbs.

• Adjustable knobs allow for tool-free adjustment of 5⁄16"–7⁄16" for solid hardwood & 1⁄2"–5⁄8" for engineered hardwood & bamboo

• High visibility tongue engagement for faster installation and non-marring profile tips to prevent floor scratches

• Oil-free operation• Swivel air fitting• Ultra-quiet rear exhaust

18-GA FLOORING STAPLER EHF1838K• Drives 18-ga. staples from 5⁄8" to 2" length and operates at

70–120 PSI• Long life maintenance-free

motor • Adjustable belt hook• Tool-free depth-of-drive

adjustment• Includes 500 nails of 11⁄4",

carrying case, and owner’s manual

Kit includes a 34° Framing Nailer, 18-Gauge Brad Nailer, 21-Gauge Stapler, 1⁄4" NPT quick-connect fittings, hex wrenches, goggles, bottle for oil, and carrying case.

Framing Nailer:• Shoots 34° clipped head stick nails • Accepts 2"–31⁄2" nail length• 70–120 PSI operating pressure • 60-Nail cap. • Weighs 8.8 lbs.Brad Nailer:• Shoots 18-gauge brad nails • Accepts 3⁄8"–11⁄4" brad length• 60–100 PSI operating pressure • 1⁄4" NPT inlet• 100-Brad capacity • Weighs 2.65 lbs.Stapler:• Shoots 21 gauge, 1⁄2" crown staples • Accepts 1⁄4"–5⁄8" staple

length • 60–100 PSI operating pressure• 1⁄4" NPT inlet • 120-Staple capacity • Weighs 1.87 lbs.

3-PC. AIR NAILER/STAPLER KIT

H6141 $24.95 SALE $1995 H5042 $149.95 SALE $7995 T22367 $149.95 SALE $8995

H7665 $99.95 SALE $8595 H5527 $39.95 SALE $2695 H6143 $74.95 SALE $5500


H8235 $179.95 SALE $11995 H8233 $170.00 SALE $11995



Please visit grizzly.com® for details WET GRINDERS

This accessory kit was assembled with the wood turner in mind. It includes a stone dresser to change the grains on the grinding wheel for fine abrasion and a jig and grinding support for rough turning and hollow turning tools. The jig and grinding support provides perfect results on oblique edges and hollow chisels.

AXE GRINDINGSCISSOR SHARPENING

CHISEL SHARPENING

JIG FOR SHARPENING 16" PLANER BLADES STRAIGHT EDGE SHARPENING JIGThis is the perfect jig for straight edges, plane irons, ripping chisels and spoke shave blades.This jig, perfect for sharpening planer blades up to 16", is precise, easy to use and maintenance-

free. It is guided by sliding bearings, has a hard, anodized finish and comes with a fine-setting for adjusting grinding angles.

WOOD TURNING SHARPENING KIT #2This DIY accessory kit includes separate jigs for sharpening axes up to 61⁄2"; knives from 11⁄2" to 4" in length; knives from 4" to 8" in length; and scissors and hedge shears.

SPECIFICATIONS:• Motor: 1⁄4 HP, 120V, 3A, 110 RPM wheel speed• 220 grit grinding wheel is specially

made for wet grinding• 12mm tool post• Grinding wheel measures 10" diameter x 2" wide• Water bath keeps tools cool while sharpening• Leather stropping wheel size: 8" diameter x 13⁄16" wide• Includes a straight edge sharpening jig, angle guide and

polishing/honing paste• Approximate shipping weight: 42 lbs.

Sharpen just about any cutting tool to a razor sharp edge in no time at all. Designed in Germany, this 110 RPM Wet Grinder with leather stropping wheel is so versatile and simple to use, you’ll wonder why you ever put up with dull edges before.

WATER BATH KEEPS TOOLS COOL WHILE SHARPENING!

YOU WON’T FIND ANOTHER GERMAN-ENGINEERED TOOL OF THIS CALIBER, AT THIS PRICE, ANYWHERE BUT AT GRIZZLY!

10" WET GRINDER KIT—ANNIVERSARY EDITION

ACCESSORY KIT #1

IDEAL FOR WOOD TURNERS, WOOD WORKERS & KNIFE MAKERS!

DESIGNED IN GERMANYDESIGNED IN GERMANY

T10010ANV $199.95 SALE $15995

T10024 $69.95 SALE $5995T10023 $89.95 SALE $7995

T10025 $209.95 SALE $17995 T20880 $23.95 SALE $2195

MODEL TYPE PRICE

T20683 Replacement Grinding Wheel for T10010 $6895

T23428 Honing Paste $595

T20684 Replacement Stropping Wheel for T10010 (pre Apr. 2010) $1895

T26668 Replacement Stropping Wheel for T10010 (post Apr. 2010) $2995

321-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

MEASURING TOOLSPRECISION DOUBLE SQUARES

T24357:• 6" scale with 4" base• Bubble level

• Accurate to US standard• Graduated in 8ths & 16ths on one side; 32nds & 64ths

on flip side• Precision-ground satin chrome blade

Precision measurements and set-ups have never been so easy. Magnetic base engages with just the turn of a switch and allows pinpoint adjustment. The dial indicator features 0–1" travel and has a resolution of 0.001". This fine set includes a molded case for protection and convenience.

T24356:• 4" scale with 21⁄2" base T24357

• 0–4" range• Inch/fraction/metric• Zero button• Hold button• Includes standard

indicator mount, battery and two interchangeable rods

DIGITAL SNAP DEPTH GAUGE & INDICATOR

MAGNETIC BASE/DIAL INDICATOR COMBO


MINIMAGNETS DIGITAL HEIGHT GAUGE 0"–6" FRACTIONAL• Large LCD display• Solid aluminum base with magnets• Hardened stainless steel beam• IP54: splash, water, oil, and dust

resistant• ABS and hold functions• Power saving 5 minutes auto-off• SPC data output• Reads inch, metric and fractional

(1⁄64")• Accuracy: 0.001"• Range: 0–6" or 0–150mm

Use this Dial Indicator with Flex Arm and Clamp just about anywhere! Mounts with a locking pliers clamp to most features and the adjustable flex arm can be set in any position with just a half turn of a cam lever. The large-face dial indicator has graduations of 0.001" and a range of 1". Great for all truck and auto mechanics!

FLEX-ARM DIAL INDICATOR WITH CLAMP

Tempered. Satin-chrome finish. 60° angles for United, American, American National and U.S. Standard Threads. Graduated 14, 20, 24 and 32 divisions per inch. Shows double depth of threads.

THREADING GAUGE

ANGLE FINDER PLUS LEVEL

DIAL HEIGHT GAUGES

Precisely set and measure angles with 0.05° resolution. Features include a hold function and reverse angle reading. Protractors measure angles 0 to 360°. Stainless steel arms are graduated in 1⁄8", 1⁄16", 1⁄32" and 1⁄64" for convenient linear measuring. Packaged in a protective plastic pouch with an extra battery.

DIGITAL PROTRACTORS

These precision Dial Height Gauges provide accurate measurements with readings in 0.001" increments. Each features fine adjustment and lock, shockproof stainless steel construction and carbide-tipped scriber.

Take the guess work out of setting tilting blades and tables with this compact angle finder. Instantly measures angles in any quadrant from 0–90°. Also great for checking plumb and level in tight quarters. Accurate to half a degree.

• Inch, metric, and fractional display• Absolute measure sensor• Hardened stainless steel body• Stackable readout panels for 2 and 3 axis installations• Magnetic back • 70" Remote cable• Preset function• Accuracy: 0–12"–0.001", 0–38"–0.002"

ABSOLUTE DRO

REMOTE DIGITAL READOUTS FOR WOODWORKING MACHINERY

• Inch, metric, and fractional (1⁄64") display• Incremental, hold, origin and preset functions• Large LCD display with magnet back• Adjustable swing arm• Resolution: 0.0005"• Accuracy: 0.002" per 6", 0.004" per 12", 0.008" per 24", 0.010"

per 32". 0.012" per 38"

G9849 $22.75 SALE $1795T10279 $32.95 SALE $2695

G5412 $8.95 SALE $795 T20287 $11.95 SALE $995

T23018 $15.99 SALE $1395

T21576 $40.95 SALE $3595

G9618 6" $44.00 SALE $2995

G9619 8" $53.95 SALE $4695

G9620 12" $74.95 SALE $6495

T24356 4" $9.95 SALE $795

T24357 6" $14.95 SALE $1195

T23019 10" $19.99 SALE $1695

T23020 14" $23.95 SALE $1895

T26539 6" ONLY $4995

T26540 12" ONLY $7495

T26541 24" ONLY $10995

T26542 32" ONLY $12495

T26543 38" ONLY $12995

T26625 6" ONLY $4495

T26626 12" ONLY $6995

T26627 24" ONLY $10495

T26628 36" ONLY $11995

33 grizzly.com®




CIRCULAR SAW BLADES

This 8" Stacked Dado set features 24 micro-grain carbide teeth for clean cuts and reduced splintering as well as 4-tooth micro-grain carbide chippers for smooth, flat bottom cuts. Heavy gauge laser-cut plate ensures accurate cutting. Includes a 12-pc. high quality shim set for ultra fine adjustments and heavy-duty case.

8" STACKED DADODW7670

10" X 5⁄8" 40T ATB GENERAL PURPOSE BLADE• Precision-ground carbide teeth for smooth accurate cuts• Thin kerf design to reduce

material waste• Balanced plate prevents blade

vibration & improves cut performance

• Fully hardened plate• For hardwood, softwood,

plywood, moulding, OSB, MDF

DADO BLADESThe world’s finest dado head clean cuts all your grooves! No splintering when cross cutting oak, ply veneers, and melamine. No staggered steps or round bottoms! Cuts in rip, cross-cut, and miter at any depth. Cuts all sized grooves 1⁄4"–29⁄32" increments. Super hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle boards.

These sets feature precision sharpened, industrial grade carbide tips for smooth, clean cutting and a dead flat plate for straight, accurate cuts. Fit 5⁄8" arbors.

Wobble

Stack

Wobble

DADO BLADE SETS

With this all purpose blade for table saws you can rip and crosscut 1"–2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1⁄16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).

WOODWORKER II

2-PACK 10" 32/60T CONSTRUCTION BLADES DW3106P5/DW3106P5D60I

2-PACK 12" 32/80T CONSTRUCTION BLADES DW3128P5/DW3128P5D80I

PRECISION TRIM SAW BLADES

Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy. Two great blades for the price of one! Fit 5⁄8" arbors.

Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy.

$13990 PURCHASED INDIVIDUALLY $7990 PURCHASED INDIVIDUALLY

10" BLADE RUNNER CARRYING CASEPrevents damage to carbide blades during transit and storage. Made from high impact plastic and can hold up to ten 10" blades (5 per side). Locking steel arbor holds blades securely. Convenient carrying handle. Unit is self-supporting and will stand on any level surface.

Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. Precision balanced, laser-cut body provides extremely accurate cuts. Exclusive damping slots reduce vibration to enhance cutting accuracy. Tough coat finish reduces heat, friction, and gum to promote blade life.

MODEL SIZE TEETH ARBOR REG. SALEH9341 10" 24 5⁄8" $24.95 $2195

H9342 10" 40 5⁄8" $32.95 $2895

H9343 10" 50 5⁄8" $35.95 $3195

H9344 10" 60 5⁄8" $45.95 $2995

H9345 10" 80 5⁄8" $54.95 $3695

H9346 12" 60 1" $45.95 $3395

H9347 12" 80 1" $58.95 $4995

H9348 12" 96 1" $61.95 $5495

T22428 $41.95 SALE $1295

MODEL SIZE TEETH ARBOR TYPE PRICE

H4755 6" 24 5⁄8" 1⁄4"–29⁄32" $27895

H4756 8" 24 5⁄8" 1⁄4"–29⁄32" $30795

T23266 8" 24 5⁄8" 3⁄16" $19895

T23267 8" 24 5⁄8" 3⁄16"–1⁄4" $21895

T24002 10" 24 1" 1⁄4"–29⁄32" $36395

T24003 12" 24 1" 1⁄4"–29⁄32" $43495

MODEL SIZE TEETH REG. SALEG2793 7" Wobble 16 $32.00 $1295

G2794 8" Stack 12 $88.00 $5995

MODEL SIZE TEETH REG. SALET22622 8" 24 $149.95 $10995

MODEL SIZE TEETH KERF ARBOR PRICE

H4744 71⁄4" 30 3⁄32" 5⁄8" $7295

H4745 8" 40 3⁄32" 5⁄8" $10395

H4746 10" 30 3⁄32" 5⁄8" $10895

H4729 10" 40 1⁄8" 5⁄8" $13395

H6890 10" 40 3⁄32" 5⁄8" $12295

H4747 12" 40 1⁄8" 1" $14195

T20778 10" 20 1⁄8" 5⁄8" $9095

T20779 10" 40 1⁄8" 5⁄8" $12795

T23526 10" 48 0.100 5⁄8" $14395

T23527 10" 48 1⁄8" 5⁄8" $15295

MODEL SIZE TEETH REG. SALEH5001 10" 32 & 60 $62.00 $3495

T22190 10" 60 $62.00 $3495

MODEL SIZE TEETH ARBOR REG. PRICEH5002 12" 32 & 80 1" $102.22 $5995

T22257 12" 80 1" $102.22 $5995

T23265 $32.95 SALE $2895

341-800-523-4777

FREE760 PAGE

2014 CATALOGLUMBERJACK TENON CUTTERSHOME SERIES KITS

PRO SERIES KITS

INDUSTRIAL SERIES KITS

Home Series Kits are great multi-purpose packages that give you small, medium and large tenon joint cutting capabilities. With this medium-duty kit, you can build beds, railings, coffee and end tables, chairs, benches and anything else you can dream that uses tenon joint. Used by homeowners, hobbyists and craftsmen alike, to cut structural, semi- and non-structural joints for indoor and outdoor projects.

Pro Series Kits are great multi-purpose packages that can make most log projects. With this heavy-duty kit, you can build beds, railings, coffee and end tables, chairs, benches and more. Used by homeowners, hobbyists and professional users, you can cut structural, semi- and non-structural joints for your indoor and outdoor projects.

Industrial Series Kits are great multi-purpose packages that can make most log projects. With this commercial-duty kit, you can make beds, railings, coffee and end tables, chairs, benches and more. Designed for professional contractors, homebuilders, craftsmen or those who prefer the tapered shoulder or larger log capacity. These semi-structural joint sizes will build your indoor and outdoor projects.

T24586

T24603

T24608

Individual cutters are available. See grizzly.com

made in usa

made in usa

made in usa

MODEL TENON DIAMETER MAX. TENON LENGTH MAX. LOG DIAMETER DRILL TYPE SHOULDER PROFILE

FORSTNER BIT DIAMETER QUANTITY PRICE

T24601 11⁄2" 4" 3" 1⁄2", <550 RPM Radius 11⁄2" 1-Piece $16995

T24602 1" and 2" 21⁄2" and 5" 21⁄2" and 31⁄2" 1⁄2", <550 RPM Radius 1" and 2" 2-Piece $38995

T24603 1", 11⁄2" and 2" 21⁄2", 4" and 5" 21⁄2", 3" and 31⁄2" 1⁄2", <550 RPM Radius 1", 11⁄2" and 2" 3-Piece $53995

T24604 ½", ¾", 1", 1½" & 2" 21⁄2", 3", 21⁄2", 4" & 5" 11⁄2", 21⁄2", 21⁄2", 3" & 31⁄2" 1⁄2", <550 RPM Radius ½", ¾", 1", 1½" & 2" 5-Piece $72500

MODEL TENON DIAMETER

MAX. TENON LENGTH

MAX. LOG DIAMETER DRILL TYPE SHOULDER

PROFILEFORSTNER BIT

DIAMETER QUANTITY PRICE

T24605 11⁄2" 3" 4" 1⁄2"–¾", Right Angle, <450 RPM 60 Degree 11⁄2" 1-Piece $26995

T24606 1" and 2" 3" and 3" 31⁄2" and 41⁄2" 1⁄2"–¾", Right Angle, <450 RPM 60 Degree 1" and 2" 2-Piece $67500

T24607 1", 11⁄2" and 2" 3", 3" and 3" 31⁄2", 4" and 41⁄2" 1⁄2"–¾", Right Angle, <450 RPM 60 Degree 1", 11⁄2" and 2" 3-Piece $94995

T24608 1", 11⁄2", 2", 2½" & 3"

3", 3", 3", 31⁄2" & 31⁄2"

31⁄2", 4", 41⁄2", 5" & 51⁄2"

1⁄2"–¾", Right Angle, <450 RPM 60 Degree 1", 11⁄2", 2", 2½" & 3" 5-Piece $179500

MODEL TENON DIAMETER MAX. TENON LENGTH MAX. LOG DIAMETER DRILL TYPE SHOULDER PROFILE

FORSTNER BIT DIAMETER QUANTITY PRICE

T24585 11⁄2" 31⁄2 3" 1⁄2", <550 RPM Radius 11⁄2" 1-Piece $9995

T24586 1" and 2" 21⁄2" & 41⁄2" 21⁄2" & 31⁄2" 1⁄2", <550 RPM Radius 1" and 2" 2-Piece $25995

T24587 1", 11⁄2" and 2" 21⁄2", 31⁄2 and 41⁄2" 21⁄2", 3" & 31⁄2" 1⁄2", <550 RPM Radius 1", 11⁄2" and 2" 3-Piece $38995



Please visit grizzly.com® for details ROUTER BIT SETS

INCLUDES:• 1⁄4", 1⁄2", & 3⁄4" straight• 1⁄2" 14˚ dovetail• 1⁄4" radius Roman ogee• 3⁄8" rabbeting• 1⁄2" radius cove• 1⁄2" 90˚ V-groove• 1⁄2" 45˚ chamfer• 1⁄2" flush trim

This complete set of carbide, double-fluted roundover bits contains 1⁄8" rad., 3⁄16" rad., 1⁄4" rad., 5⁄16" rad., 3⁄8" rad. and 1⁄2" rad. All sizes have a 3⁄8" guide bearing. Includes latching wooden box. Profiles shown at half size.

99-PC. MASTER CABINETMAKER ROUTER BIT SET

36-PC. ROUTER BIT SET

INCLUDES:• 1⁄8" & 1⁄4" solid carbide straight bits• 1⁄4", 5⁄16", 3⁄8", 1⁄2", 5⁄8" & 3⁄4" straight bits• 1⁄4" solid carbide spiral downcut• 1⁄4" & 1⁄2" radius cove bits• 1⁄8", 1⁄4", 3⁄8" & 1⁄2" radius

roundover bits• 1⁄4" & 1⁄2" radius beading bits• 5⁄32" & 1⁄4" radius Roman

ogee bits• 1⁄2" & 3⁄4" core box bits• 3⁄8" & 1⁄2" dovetail bits• 3⁄8" x 1, 1⁄2" x 1" & 1⁄2" x 9⁄16"

flush trimming bits• 1⁄2" flush trimming

pattern bit• 5⁄32" & 1⁄4" radius classical bits• 3⁄8" shear cut rabbeting bit• 45° shear cut chamfer bit

• 1⁄2" shear cut hinge mortise bit• 1⁄4" solid carbide combination panel bit• 1⁄4" solid carbide flush trim laminate bit• 1⁄2" 90° V-groove bit• 3⁄8" keyhole bit

These are super sharp, micro-grain carbide-tipped bits that are ground up to 800 grit to glide through your cuts. Includes protective wooden case with touch-latch doors.

35-PC. ROUTER BIT SET IN ALUMINUM CASEIf you’re looking for one router bit set to own, this micro-grain, carbide-tipped router bit set provides just about every bit you’ll ever need. Each bit is displayed in a high-tech, see-through aluminum case for the ultimate in protection.

INCLUDES:• 1⁄4" x 1⁄2" single flute straight bit• 1⁄4", 3⁄8", 1⁄2" & 3⁄4" straight bits• 3⁄8" & 1⁄2" dovetail bits• 1⁄2" x 3⁄8", 1⁄2" x 5⁄8", 5⁄8" x 1⁄2" & 3⁄4" x 1⁄2"

core box bits• 1⁄4" radius roundover plunge bit• 1⁄2" hinge mortising bit• 3⁄8", 1⁄2" & 5⁄8" V-groove bits• 3⁄8" x 1⁄2", 1⁄2" x 1⁄2" & 1⁄2" x 1" straight flush

trimming bits• 5⁄32" radius Roman ogee bit• 1⁄8", 1⁄4", 5⁄16", 3⁄8" & 1⁄2" radius roundover bits• 3⁄8" & 1⁄2" 45° chamfer bits• 1⁄4" & 1⁄2" radius cove bits• 3⁄8" radius beaded cove• 1⁄8" & 1⁄4" radius classical bits• 3⁄8" x 1⁄2" rabbeting bit

6-PC. ROUNDOVER SETIf you’re just starting a router bit collection or need to replace some old worn out bits, this set of super-duty micro-grain bits is the perfect choice.

12-PC. ROUTER BIT SETS

• Classical ogee bit• Keyhole bit • Aluminum case

• 1⁄2" core box• 1⁄2" radius roundover• Includes wooden case



• (3) 1⁄8", 3⁄16", 1⁄4" HSS straight• (1) 1⁄4" HSS dovetail• (1) 5⁄16" HSS keyhole• (1) 1⁄4" HSS plunge ogee• (1) 1⁄4" HSS V-groove• (1) 1⁄4" HSS core box• (1) 1⁄8" Radius HSS roundover• (1) 3⁄32" Radius HSS beading• (1) 1⁄8" Radius HSS cove• (1) 1⁄8" HSS rabbeting• (1) 1⁄2" HSS 45° chamfer• (1) 1⁄2" Dovetail pattern• (1) 1⁄2" 90° V-groove pattern• (1) 1⁄2" Core box pattern• (2) 1⁄2" & 5⁄8" Straight pattern• (3) 1⁄4", 3⁄8", 1⁄2" HSS straight• (1) 1⁄8" HSS straight single flute• (5) 1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4" Straight• (4) 3⁄8", 1⁄2", 5⁄8", 3⁄4" 90° V-groove• (4) 3⁄8", 1⁄2", 5⁄8", 3⁄4" Core box• (3) 3⁄8", 1⁄2", 1⁄2" Dovetail

• (2) 1⁄2" & 5⁄8" Mortising• (3) 1⁄2" x 1⁄2", 3⁄8", 1⁄2" x 1" flush trimming• (3) Bevel trimming• (2) 1⁄4"–3⁄8" Combination panel• (2) 1⁄8"–3⁄8" Radius beading/roundover• (2) 3⁄8"–1⁄2" Keyhole T-slot• (1) 1⁄2" Roundnose• (1) Countersink• (1) 1" Plunging ogee• (1) 1" Glue joint• (1) 7⁄8" x 1⁄2" Internal radius• (1) 3⁄4" Fingernail• (1) 1⁄2" Straight• (2) 1⁄4" & 1⁄8" Radius roundover• (3) 1⁄2", 1⁄2", 3⁄4" Classical plunge• (1) 1⁄4" Core box• (4) 1⁄8" Radius classical• (1) 1⁄8" Radius Roman ogee• (1) 3⁄4" 45° Chamfer• (6) 1⁄8", 3⁄16", 1⁄4", 5⁄16", 3⁄8", 1⁄2" Radius

roundover

• (2) 1" & 17⁄16" 45° Chamfer• (5) 1⁄8", 1⁄8", 1⁄4", 3⁄8",1⁄2" Radius cove• (2) 1⁄4" & 1⁄2" Rabbeting• (1) 1⁄8" Radius corner bead• (2) 13⁄32" & 1⁄2" Bull nose• (4) Classical• (2) 11⁄4" & 11⁄2" Ogee• (2) 1⁄8" & 1⁄4" Radius Roman

ogee• (2) 1⁄4" & 3⁄8" Radius

beading

H5543 1⁄4" Shank $43.00 SALE $2695H5560 1⁄4" Shank $65.00 SALE $3995

H5561 1⁄2" Shank $65.00 SALE $3995

H3426 1⁄4" Shank $167.95 SALE $9995H6159 1⁄4" Shank $130.00 SALE $10995

H6072 1⁄4" & 1⁄8" Shank $325.00 SALE $27500

361-800-523-4777

FREE760 PAGE

2014 CATALOGHAND TOOLS

This 8-pc. HSS Turning Tool Set includes 3⁄4" Roughing Gouge, 1⁄4" and 1⁄2" Spindle Gouges, 3⁄8" Bowl Gouge, 3⁄4" Standard Skew, 3⁄16" Diamond Side Cut Scraper, 1" Square Scraper, and 1⁄2" Round Scraper. Overall lengths are 16" to 19".

Heavy cast iron body, high carbon heat treated steel blade and precision adjustment knobs make this Spokeshave a pleasure to use. Straight sole for shaping flat surfaces or convex sole for shaping contoured surfaces.

This five-piece Bailey chisel set is perfect for the serious woodworker who demands perfection. Designed with stained beech handles and an upgraded brass ferrule, these high-quality chisels have pre-honed micro bevels and an improved blade finish with new grinding centers. Manufactured in Sheffield, England, Bailey Chisels are known for unsurpassed quality. This 5-piece set includes the following sizes: 1⁄4" (6mm), 1⁄2" (12mm), 3⁄4" (19mm), 1" (24mm), and 11⁄4" (32mm).

• Dual purpose – converts from a shoulder plane to a chisel plane

• Iron is made from extra thick 1⁄8" A2 steel for superior edge retention

• Precision-ground cast iron base for accuracy• Finger grips for better control

ROBERT SORBY 8-PC. TURNING TOOL SET

SPOKESHAVES STANLEY #92 SHOULDER PLANE

12-PC. CARVING CHISEL SET

PLIERS WRENCHES 3-PC. SET

BAILEY CHISEL SET COMPACT BOLT CUTTER• 1⁄4" Straight Chisel • 1⁄2" Straight Chisel• 13⁄16" Curved Chisel • 1⁄2" Skew Bevel Chisel• 1⁄4" V-gouge • 5⁄16" V-gouge• 11⁄16" Curved Gouge• 1⁄2" Long Curved Gouge• 1⁄4" Straight Gouge• 7⁄16" Straight Gouge• 11⁄16" Straight Gouge• 111⁄16" Straight Gouge

• The versatility of a wrench with the grip of pliers• Smooth jaws will not

damage chrome or other surfaces

• Fast push button adjustment

• Lever transmission is greater than 10-to-1 for strong gripping power

• Can also be used for tile breaking

• 7", 10", and 12" long

• Optimized jaw shape will grip round, square, and hex shape materials

• Self-gripping angular jaw for excellent gripping force

• Sturdy box joint with 7-position slide-lock adjustment

• Thin head fits in tight places

• Gripping surfaces with special hardened teeth

CHILDREN'S TOOL KIT

145-PC. MECHANIC’S TOOL SET 65-PC. GENERAL TOOL SET

ALLIGATOR PLIERS 3-PC. SET

JUNIOR WORKING TOOL 12-PC. SET

11-piece tool set. Transport & stow-away tools inside solid wood caddy. Kit includes: safety glasses, wrench, level, hammer, pliers, Phillips® & slotted screwdriver, ruler, tape measure & square. Easy to use & carry. Great fun for ages 8 and up. Tool box measures 121⁄2" L x 6" W.

A set for all the basic mechanic’s needs. Wrenches and socket sets have chrome vanadium forged bodies for strength and durability and a full polished chrome finish for anti-corrosion protection.

For the little helper in your shop! Set includes: 4 pocket vinyl tool belt with 2 pouches, 9" magnetic torpedo level, 6 oz. claw hammer, 10' tape measure, 6" try-square, chalkline/plumb bob, 4 oz. bottle of chalk, 10" ruler, durable leather gloves, safety goggles, adjustable hard-hat and suspenders. For ages 8 and up.. Glovecolor may vary.

The 65-piece homeowner’s tool set is packaged in a blow molded case for easy tool storage. All tools in the kit meet or exceed ANSI specs. The hex key sets come in durable caddies to keep keys organized, one for SAE keys and a separate one for metric. It includes ratchet and sockets and comes with a limited lifetime warranty.

• Induction-hardened blades cut ACSR, round steel, and piano wire

• High leverage action provides 20-to-1 cutting power ratio• Cuts bolts, nails, and rivets up to 13⁄64" (5.2mm) diameter• Center cut blades for the heaviest applications• 8" Long

H6542 $429.95 SALE $34995

StraightH8064 $17.75 SALE $1525

ConvexH8065 $17.50 SALE $1495

T22302 ONLY $7995 T24713 $56.95 SALE $4995

T22297 $109.95 SALE $7995

D3784 $69.95 SALE $5995

T25375 $164.95 SALE $13995 T25379 $77.95 SALE $6995 H5855 $22.95 SALE $1995

H3044 $21.25 SALE $1895 T22973 $59.95 SALE $5195 T22570 $39.95 SALE $3495

37 grizzly.com®




DRILL BIT SETS

Titanium nitride-coated bits last up to six times as long as uncoated bits. The set features fractional bits from 1⁄16" to 1⁄2" in increments of 1⁄64", letter bits from A–Z and 60 number bits. Housed in rugged steel case.

115-PC. TiN COATED DRILL BIT SET

4-PC. 60° HSS CENTER DRILL SET

129-PC. HOME ESSENTIAL PROJECT DRILL/DRIVING SET

7-PC. GLASS/GRANITE DRILLING SET

12-PC. GLASS/GRANITE DRILLING SET

29-PC. HSS DRILL BIT 22-PC. HSS DRILL BIT

8-PC. SILVER & DEMING SET 26-PC. WOOD BORING SET

115-PC. DRILL BIT SET IN HANDY FOLD-OUT CASE

170-PC. 135° SPLIT POINT TiN COATED HSS DRILL BIT ORGANIZER PROFESSIONAL QUALITYThis set includes every drill bit

from 1⁄16" to 1⁄2" in 1⁄64" increments, numbered bits from 1–60 and lettered bits from A–Z. TiN coated HSS drill bits stay sharp longer than conventional bits. This set is professional quality and comes in a fold-out case.

TiN-coated HSS drill bits stay sharp longer than conventional bits. Each size includes multiple bits for replacement due to breakage and wear from tough drilling jobs. Sizes include 10 each of the following: 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 11⁄64", 3⁄16", 13⁄64", 7⁄32", 15⁄64", 1⁄4", 17⁄64", 9⁄32", and 5 each of the following: 5⁄16", 21⁄64", 11⁄32", 3⁄8". Comes in a steel case!

These double-ended HSS Center Drills are precision-ground. Set includes sizes 1–4.

HSS bits are treated and finished with a black oxide coating. 29-piece set includes bits ranging from 1⁄16" to 1⁄2" in increments of 1⁄64". Housed in rugged steel case.

• Stepped drill 1⁄2" shanks fit 1⁄2" drill chucks

• High-speed steel for long life• Set includes 9⁄16", 5⁄8", 11⁄16", 3⁄4",

13⁄16", 7⁄8", 15⁄16", and 1" bits• 6" overall length• Comes in a fitted case

• An assortment of general purpose, brad point, and masonry drill bits (36 total)

• 4 spade bits• 12 hex keys• 9 nutdrivers• A drill bit gauge• A magnetic bit tip holder• 66 assorted 1- and 2-inch

screwdriving bits

Take care of all your wood boring needs with this 26-Pc. Set. Includes 5⁄16", 1⁄2", 5⁄8", 3⁄4", and 7⁄8" screw tip auger bits with hex shanks; 1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", and 1" forstner bits; 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", and 1" spade bits with hex shanks; and 1⁄8", 5⁄32", 3⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", and 3⁄8" brad point bits. All protected in a plastic storage case.

Includes:• Phillips® Bits: P1, (3) P2, (2) P3• Square Recess Bits: SQ1, (3) SQ2, SQ3• Torx® Bits: T10, T15, T20, T25, T27,

T30• Slotted Bits: SL 1⁄8", SL 3⁄16", SL

1⁄4", SL 9⁄3"• Magnetic Bit Holder

• Ideal for glass mirror, granite tile, and granite countertop installations

• Powerful suction cup ensures drill guide remains stationary

• Diamond- core drill bits• Bit sizes: 3⁄ 16", 1 ⁄4", 5⁄ 16",

3⁄ 8", 1 ⁄ 2", and 3⁄4"

Drill not included

• Ideal for glass mirror, granite tile and granite countertop installations

• Powerful dual suction cups ensure drill guide remains stationary

• Adjustable guide for different bit sizes

• Diamond-core drill bits

• Bit sizes: 3⁄ 16", 1 ⁄4", 5⁄ 16", 3⁄ 8", 1 ⁄ 2", 3⁄4", 7⁄ 8", 1", 11 ⁄ 8", 11 ⁄4" and 13⁄ 8"

Drill not included

35-PC. IMPACT READY DRILL/FASTENING SET DW2180Made of a special steel designed to be ultra-durable, each bit uses a black oxide process for greater wear resistance and strength. The tips in the set can be used with impact tools rated for up to 2000 in./lbs. of torque. The kit consists of a variety of different tips, including Phillips®, square drive, and flat head bits. It also has drivers, a magnetic tip holder and various double- and single-sided tips. Comes in a Tough Case™.

SIZE BODY DIA. DRILL DIA. OA LENGTH1 1⁄8" 3⁄64" 11⁄4"

2 3⁄16" 5⁄64" 17⁄8"

3 1⁄4" 7⁄64" 2"

4 5⁄16" 1⁄8" 21⁄8"

G3658 $69.95 SALE $5995


H8183 $54.95 SALE $4695 H8182 $149.95 SALE $12995

T22552 $29.95 SALE $1495


D1135 $21.95 SALE $1895 T24300 $9.95 SALE $895

381-800-523-4777

FREE760 PAGE

2014 CATALOGCLAMPS

• One-handed operation rapid return feature allowing for fast closing and extra productivity

• Converts easily to a spreader• Tough re-enforced nylon body for added durability• Removable jaw pads protect work surfaces

These are the most popular clamps on the market today. Use with widely available 1⁄2" or 3⁄4" black steel pipe.

G3532 G3533

PIPE CLAMPS H SERIES PIPE CLAMPSThe “H” shaped foot assembly stabilizes the clamp in two dimensions giving dual-axis stability to the workpiece and industry leading clearance from the work surface.

Pipe not included

Pipe not included

ALL-IN-ONE CONTRACTOR CLAMP

TOGGLE CLAMPS

The All-In-One Contractor Clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease-of-use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9% glass content.

These Heavy-Duty F-Clamps feature quick sliding adjustment, non marring pad protection and 43⁄8" of depth for just about any clamping requirement. Long, narrow stationary head allows these clamps to reach into tight places. Cast iron clamp heads and steel bar construction.

HEAVY-DUTY F-CLAMPS

Get a 30-piece mix of the popular 2.5" throat Bessey Tradesman clamps for one low price. Includes four 6" clamps (G3316), six 12" clamps (G3317), four 18" clamps (G3318), eight 24" clamps (G3319), four 30" clamps (G3320) and four 36" clamps (G3321).

TRADESMAN CLAMP KITThese heavy-duty clamps are designed for high demand professional and industrial use. The steel I-beam is extremely strong and resistant to twisting and bending. The sliding head is cast of tough ductile iron and features a 4-piece, hardened steel clutch.

I-BEAM CLAMPS

TRIGGER CLAMPS

Bessey Auto-Adjust Toggle Clamps automatically adjust to variations in workpiece dimensions while maintaining constant clamping force. Integrated clamping force adjustment screw adjusts from 25 to 550 lbs. (max holding capacity 700 lbs.)

T24246 T24247 T24248

*Variable and dependent on spindle settings, pressure screw setting, force applied etc.

G3532 1⁄2" $14.95 SALE $1095

G3533 3⁄4" $15.95 SALE $1395T20479 1⁄2" $14.95 SALE $1295

T20481 3⁄4" $14.95 SALE $1295

T20954 12" $27.95 SALE $2395

T20955 24" $30.95 SALE $2695

T20956 36" $35.95 SALE $3095

T20957 50" $38.95 SALE $3395

T23204 24", 36", 50" $103.95 SALE $6995

T22575 4.5", 2-Pack $8.95 SALE $795

T22576 6" $9.95 SALE $895

T22577 6", 2-Pack $18.95 SALE $1695

T22578 12" $16.95 SALE $995

T22579 12", 2-Pack $21.95 SALE $1895

T22580 24" $29.95 SALE $2495

T22581 36" $35.95 SALE $2995

T22582 6" Rapid Return $24.95 SALE $2195

T22583 12" Rapid Return $25.95 SALE $2295

G3543 24" $35.95 SALE $3095

G3544 30" $37.95 SALE $3295

G3545 36" $36.95 SALE $3295

G3546 48" $42.95 SALE $3695

G3547 60" $39.95 SALE $3695

G3548 72" $42.95 SALE $3695

G3549 84" $52.95 SALE $4595

(60" or longer—add $10 oversize shipping fee)

D2916 12" $9.95 SALE $895

D2917 18" $10.95 SALE $995

D2918 24" $13.95 SALE $1195

D2919 36" $15.95 SALE $1395

Kit—(12) D2916, (8) D2917, (6) D2918 & (4) D2919

H8444 30-Piece $301.50 SALE $25995

H5115 $362.50 SALE $32995

MODEL CAPACITY HANDLE POSITION WHEN LOCKED SIZE REACH REG. SALET24246 25–550 lbs.* Down 21⁄4" x 83⁄8" 2" $19.95 $1795

T24247 25–550 lbs.* Down 21⁄4" x 83⁄8" 23⁄4" $20.95 $1795

T24248 25–550 lbs.* Down 21⁄4" x 93⁄8" 1" $20.95 $1795

$1000

$1000



Please visit grizzly.com® for details CLAMPSPRESS DOWN-TYPE ACTION TOGGLE CLAMPS

G1772

G1774

Jorgensen 3⁄4" PRO Pipe Clamp Fixture features a wider and taller stance, taller and wider jaws, built-in clamp stand, longer screw and built-in clamp hanger. Clamping jaws are 21⁄8". Clamps sit 21⁄2" above the work surface.

3⁄4" PRO PIPE CLAMP FIXTURE

3-PC. CLAMP RACK SETS• D4333 includes wall mounted F-Clamp Rack, Pipe Clamp Rack

and Parallel Clamp Rack• Holds 15 F-style clamps, 9 pipe clamps and 12 parallel clamps• Made of heavy gauge steel• 245⁄8'' maximum overall length• Mounting holes are 16'' on-center to fit

standard wall stud spacing• Mounting screws not included

D4333 Clamps not included.

Pipe not included.

BOX CLAMPDry-fit and square all your parts at the same time without any bulky clamps. These Box Clamps are designed for any 90° joint, including butt joints, lap joints, T-joints, miter joints, box joints, dovetails and more, even if material is extending past the face. The Box Clamp will accommodate materials from 1⁄4" up to 1" in thickness. Molded from a special combination of glass reinforced polycarbonate, they’re virtually indestructible. Sold in pairs.

ISD MICRO BAR CLAMPSPistol grip design allows you to use one hand to apply pressure. The stationary head can be removed and fixed to opposite end of bar to use as a spreader. Soft pads protect work. Ideal for light-duty, hobby or craft projects.

22-PC. HEAVY-DUTY F-CLAMP KITGet this 22-piece mix of Jorgensen's most popular bar clamps for one low price. Includes (2) 6" bar/spreader clamps (H7322), (2) 12" bar/spreader clamps (H7323), (2) 24" bar/spreader clamps (H7325), (4) 4" light duty clamps (H7338), (4) 6" light duty clamps (H7339), (2) 24" steel bar clamps (G3542), (2) 36" steel bar clamps (H2229), (2) 24" heavy-duty steel bar clamps (H5313) and (2) 36" heavy duty steel bar clamps (H5315).

These quick action toggle clamps are extremely useful for bench-mounted jigs and special jigs for machinery. Grizzly offers a terrific selection of press down and push-type toggle clamps to suit a wide range of clamping applications.

*Variable and dependent on spindle settings, pressure screws setting, force applied, etc.

These clamps are the standard in home & professional workshops. All designs feature multiple disc-clutch and the exclusive Jorgensen swivel. Medium-duty clamps do not include clamp pads.

STEEL BAR CLAMPS

G3539

RATCHETING SPRING CLAMP SETFeatures heavy-duty resin construction with pivoting jaws and quick action, quick release ratcheting mechanism. 2" Capacity. Set of four.

MODEL CAPACITY HANDLE POSITION WHEN LOCKED SIZE REACH SALE

G1772 200 lbs.* Up 23⁄4" x 35⁄8" 13⁄8" $950

G1773 500 lbs.* Down 7" x 2" 2" $1695

G1774 792 lbs.* Up 53⁄4" x 91⁄4" 3" $2025

MODEL TYPE REG. SALE

D4345 3-Pc. Pipe Clamp $43.95 $3795

D4346 3-Pc. Parallel Clamp $43.95 $3795

D4347 3-Pc. F-Clamp $43.95 $3795

D4333 3-Pc. Set (one of each) $43.95 $3795

T24643 PER PAIR $3695

H7340 $337.00 SALE $22500T26396 $17.95 SALE $1595

T25356 $14.95 SALE $1295

$1000

MODEL SIZE THROAT REG. SALET24134 4" 13⁄8" $4.95 $395

T25359 8" 13⁄8" $4.95 $395

T25358 6" 21⁄4" $10.95 $995

T25357 12" 21⁄4" $12.95 $1095

MODEL SIZE THROAT SALELight-Duty (300 lb. Capacity)H7338 4" 2" $595

H7339 6" 2" $595

Medium-Duty (600 lb. Capacity)G3539 6" 21⁄2" $895

G3540 12" 21⁄2" $995

G3541 18" 21⁄2" $1095

G3542 24" 21⁄2" $1195

H2228 30" 21⁄2" $1295

H2229 36" 21⁄2" $1395

Heavy-Duty (1000 lb. Capacity)H5310 6" 3" $995

H5311 12" 3" $1095

H5312 18" 3" $1195

H5313 24" 3" $1295

H5314 30" 3" $1495

H5315 36" 3" $1695

401-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

OSCILLATING MULTI-TOOL

Can be used for Fein-Multimaster FMM250Q and Bosch PMF180E.OSCILLATING MULTI-TOOL ACCESSORIES

STANDARD PUSH-CUT SAW BLADES

CRV RADIAL SAW BLADE

RASPS

SANDING PADDIAMOND COATED SAW BLADE

CARBIDE GRIT SAW BLADE

HSS SAW BLADES

BI-METAL STANDARD FLUSH-CUT SAW BLADES

SCRAPERS

PRECISION PUSH-CUT SAW BLADES

GROUT & MORTAR REMOVER

• Carbide grit edge for a broad range of applications • Cuts tile, plaster, porous concrete, and similar construction materials

• For rough grinding wood, stone, and concrete

INCLUDES:• Curved scraper• 28mm CRV flush-cut wood saw blade• 28mm bi-metal flush-cut saw blade• CRV radial saw blade• 93mm triangle sanding pad• 5-Pc. 93mm red sandpaper• 5-Pc. 93mm white sandpaper

FEATURES:• 15000–22000 OPM (variable no-load speed) • 1.8 Amps• 7' Power cord• 1-Year warranty • Carrying case

• HSS for a broad range of applications

• Cuts wood and metal• Radial saw blade for flush

cutting• Segment saw blade for

straight cutting into corners and right angles

• CRV hardened teeth cuts wood, plastics, and plasterboard

• Use for plunge cutting and flush cutting

• Flexible Scrapers remove soft adhesives, paint residue, and silicone caulk

• Rigid Scrapers remove tougher adhesives, glued-down carpet, and under coatings

• Universal saw blades feature bi-metal blades for wood and metal

• Fine tooth count for smooth cuts

• For deep plunge cutting

• Combines a segment blade with a triangle blade in a drop-shape design

• Can be used to rout out damaged tile and rasp away mortar or tile adhesive without changing the tool

• Diamond-coated edge for a broad range of applications

• Cuts tile, glass, fiberglass, and similar materials

• Sanding Pad features micro-hook and loop fastening system for quick and easy sanding sheet changes

• Compatible with all standard Delta shaped hook and loop sanding sheets

• Removes mortar or tile adhesive when removing damaged tile

• Removes carpet adhesive from hard surfaces • For rough grinding wood, stone, and concrete

• CRV hardened teeth for a broad range of applications • Ground and side set teeth for precise, clean, and quick cutting

• For wood, plastic, and plasterboard

• CRV hardened teeth for a broad range of applications • Fine tooth count for smooth cuts • For wood, plastic, and plasterboard

• Bi-metal blades for wood and metal • Fine tooth count for smooth cuts • For flush cutting applications

CRV STANDARD FLUSH-CUT SAW BLADES

The Oscillating Multi-Tool is the tool of choice for remodelers, tile and floor installers, finish carpenters, drywallers, and do-it-yourselfers. And, for good reason! The Oscillating Multi-Tool, with a wide assortment of aftermarket saw blades, cuts flush and into corners like no other saw. Also great for scraping, sanding, and plunge cutting. You won’t find a more versatile tool at a price this low!

"Amazing tool – I have one"S. Balolia, President

BUY 5 ITEMS OR MORE FROM THIS PAGEAND GET 20% OFF

T25137 Universal–11⁄4" $350

T25138 Universal–13⁄4" $395

T25139 CRV/Wood–211⁄16" $350

T25140 CRV/Wood–15⁄16" $250

T25143 Wood–11⁄8" $275

T25144 Wood–7⁄8" $275

T25145 Wood–3⁄8" $275

T25146 Metal–3⁄8" $275

T25147 Metal–7⁄8" $295

T25148 Metal–11⁄8" $295

T25153 Wood–37⁄16" $350

T25160 Diamond Ctd 31⁄8" $725

T25161 Carbide Grit 31⁄8" $375

T25159 35⁄8" $350T25149 29⁄16" $395

T25158 29⁄16" $695

T25150 29⁄16" $350

T25151 Radial–37⁄16" $375

T25152 Segment–31⁄8" $375

T25154 Flexible–21⁄16" x 13⁄4" $250

T25155 Rigid–21⁄16" x 1" $250

T25156 Flexible–2" $250

T25157 Rigid–2" $250

T25141 Wood–15⁄16" $275

T25142 Wood–211⁄16" $350

Model T25227 ONLY $7195


MULTI-TOOL ACCESSORIESTIN-COATED BI-METAL STANDARD FLUSH-CUT UNIVERSAL SAW BLADES

TIN-COATED HSS STANDARD FLUSH-CUT METAL SAW BLADES

BI-METAL FLUSH-CUT SAW BLADE FOR HARDWOOD

TIN-COATED HSS RADIAL SAW BLADE

HSS MULTI-FUNCTIONFOUR-EDGE SAW BLADE

HSS SERRATED EDGE RADIAL SAW BLADE

DIAMOND BOOT SAW BLADE

CRV SERRATED EDGESAW BLADE

CARBIDE GRIT FLUSH-CUT SAW BLADE

ROUND CARBIDE GRITSAW BLADE

DOUBLE-FACE CARBIDE GRIT FINGERTIP RASP

TIN-COATED HSS SEGMENT SAW BLADE

DIAMOND-COATED RADIAL SAW BLADE

HSS STANDARD FLUSH-CUT METAL SAW BLADES

CARBIDE GRIT RADIALSAW BLADES

• TiN-coating stays sharper longer than non-coated blades


• HSS for a broad range of applications• Straight edges have 14 and 18 TPI• Curved edges have 20 TPI

• Ideal for cardboard, carpet and carpet pad


• Unique shape for greater versatility• Diamond-coated edge for a broad range of

applications• Cuts tile, glass, fiberglass, and

similar materials

• For rough grinding tile adhesive, concrete, stone, and wood

• Carbide grit is coated on both sides• Fingertip shape is well suited for small

areas

• For cutting out damaged tile along grout lines• For cutting grooves in plaster, porous

concrete, and similar construction material


• Bi-metal blades for wood and metal• Fine tooth count for smooth cuts• For flush cutting

• Bi-metal blade for tough hardwoods• Fine tooth count for smooth cuts• For flush cutting applications


• HSS blades for metal• Fine tooth count for smooth cuts• For flush cutting

applications

• High speed steel blades for a broad range of applications

• Fine tooth count for smooth cuts• For flush cutting applications

• TiN-coating stays sharper longer than non-coated blades• HSS for a broad range of applications• Cuts wood and metal• Radial saw blade for flush

cutting• Segment saw blade for

straight cutting into corners & right angles

• Diamond-coated edge for a broad range of applications• Cuts tile, glass, fiberglass, and similar materials

• CRV hardened teeth cut foam, soft plastics, and plasterboard

• Use for plunge cutting and flush cutting

• Cuts tile, plaster, porous concrete, and similar construction materials


• For flush cutting applications

• Carbide grit edge for a broad range of applications

• Cuts tile, plaster, porous concrete, and similar construction materials


T26323

T26327

T26317

T26329 33⁄8" Diameter $795

T26317 11⁄4" $595

T26319 13⁄4" $595

T26320 3⁄8" $395

T26322 13⁄8" $395

T26327 29⁄16" Diameter $395

T26328 33⁄8" Diameter $495

T26318 11⁄4" $295

T26326 23⁄8" x 31⁄8" $695

T26330 4" Diameter $695

T26333 29⁄16" $495

T26331 211⁄16" $495

T26334 11⁄8" $295 T26335 31⁄8" Diameter $495

T26332 13⁄8" $395

T26325 31⁄8" Diameter $595T26321 3⁄8" $595

T26323 13⁄8" $595

T26324 37⁄16" Diameter $795

421-800-523-4777

FREE760 PAGE

2014 CATALOGOSCILLATING MULTI-TOOLS

OSCILLATING MULTI-TOOL ACCESSORIES

2.3 AMP SONICTOOL™ SS5120 2.5 AMP SONICRAFTER™WITH HYPERLOCK™ RK5139K

3 AMP SONICRAFTER™ X2WITH HYPERLOCK™ RK5140K

31-PC. OSCILLATINGMULTI-TOOL KIT PCE605K

MULTI-PURPOSE PROFILE SANDING SET

8-PC. GENERAL-PURPOSE TOOL ACCESSORIES SET

ROUND DIAMOND COATEDSAW BLADES

• Includes six moulding profiles and a variety of cloth-backed AO sanding grits

• Easy sandpaper and profile changes

• Profile heads measure 21 ⁄ 8" long

Includes triangle H&L sanding head, flush and offset scrapers, 11 ⁄ 8" CRV wood cutting and bi-metal wood & metal cutting blades, HSS radial blade and triangle, and radial carbide grit rasps

• Diamond-coated edge for a broad range of applications

• Cuts tile, glass, fiberglass, and similar materials

• 31 ⁄ 8" Diameter

This Oscillating Multi-Tool Kit delivers the performance needed for tough applications, including cutting, sanding, scraping, and grinding. The PCE605K multi-tool features a 3A motor and delivers 10,000–22,000 oscillations per minute (OPM), which enables users to quickly complete different applications in a variety of materials. The new tool features a depth/cutting guide that provides stability when making long cuts as well as control for making plunge cuts.

• Powerful 1.5A motor—cuts through 1¼" oak door jamb• Compact design—provides access to tight spaces• Quick Fit™ feature—for faster accessory changes• Separate ON/OFF switch maintains speed setting after

tool is shut off• Ergonomically-optimized soft grip for

comfort and control• 10,000–21,000 OPM wide speed range

for optimal control • Electronic feedback circuitry for

consistent speed under load

• Powerful 3A motor delivers reliable performance for a variety of tasks• Quick-Change accessory system• Dual-Grip variable-speed trigger offers precise speed control• Bright LED light illuminates dimly lit work spaces• Adjustable Tool Guide system offers depth and height control during cuts

• Powerful 2.5A motor with constant speed control• Hyperlock tool-free blade changes with up to 1-ton of clamping force

to prevent blade slippage• Universal fit system adapts to fit most

other brands' accessories• Variable speed dial for precision control• Use to cut, saw, scrape, sand, shape,

polish, and remove grout

• Powerful 2.3A motor with variable speed control• Universal fit system adapts to other brands' accessories and prevents

slippage• Use to cut, saw, scrape, sand, shape, polish, and

remove grout• Tool weight is 2.94 lbs.• Includes 8 accessories

• 3A Sonicrafter is an all-in-one oscillating tool ideal for a variety of applications

• Universal Fit system accepts accessories from most other brands

• Features Hyperlock tool-less blade change functionality with 1-ton clamping force

• Utilizes safe and smooth microsonic high-frequency oscillation technology

MULTI-MAX OSCILLATING VARIABLE SPEED TOOL KIT

3 AMP OSCILLATING TOOL KITWITH 29 ACCESSORIES DWE315K

T26336

T26368 ONLY $4995

T26369 ONLY $11995

T22715 ONLY $12995

T21858 ONLY $11995

T26336 Depressed Center $695

T26337 Flat Center $695 T26339 ONLY $1895 T26338 ONLY $995

T26371 Sonishear™ $2495

T26370 ONLY $14995

T29042 ONLY $16995



Please visit grizzly.com® for details TRACK SAW

Optional 55" Guide Rail and Accessories Shown in Use

This Track Saw redefines the circular saw, making traditional circular saws obsolete! Its plunge-cutting action eliminates flip-up blade guards and its riving knife reduces the risk of pinching and kickback for a new revolution in safety. And, although this saw cuts like any other circular saw, the optional Guide Rail is indispensable for making straight cuts when cutting wide panels. No more unsafe, over-extended reaching, and poor balance while cutting wide panels on a table saw! The Guide Rail features a non-slip base and low-friction glide strips for a secure, nearly effortless cutting experience. The optional Accessories Pack includes two rail clamps that firmly secure the guide rail without hindering saw travel and a rail connector for joining two guide rails when ripping full length plywood. Once you use this Track Saw, you'll never go back to your old circular saw!

SPECIFICATIONS:• Motor: 120V, 9A, 1.1 kW• Motor speed: 5500 RPM• Blade rim speed: 9070 ft per minute• Max cutting depth at 90°: without rail 25⁄ 32",

with rail 131 ⁄ 32"• Max cutting depth at 45°: without rail 15⁄ 8",

with rail 17⁄ 16"• Saw blade: 160mm x 20mm x 48 tooth• Distance between saw blade and wall: 5⁄ 8"• Dust port diameter: 11 ⁄ 2"• Weight: 11 lbs.

FEATURES:• Includes saw blade• Continuous cutting depth limiter• Anti-kickback protection• Dust port for shop vacuum

FEATURES:• Suitable for a variety of materials like solid wood

worktops, double-coated MDF boards, etc.• Infinitely variable cutting depth up to 25⁄ 32"• Rail system for accurate and inclusive splinter-free

cuts• Non-slip backing on the underside of the rail for

secure grip on the workpiece• Sliding surfaces on the guide rail ensures smooth

machine operation• Built-in riving knife for anti-kickback protection• Anti-tilt bar provides a secure grip on the guide rail

for miter cutting

* Accessory pack includes guide rail clamps (2), rail connector, limit stop, and anti-tilt bar.

Optional T25094 Accessories Pack*

TRACK SAW AND GUIDE RAIL

Plunge Cutting Action and Riving Knife for Increased Safety

DESIGNED IN GERMANYDESIGNED IN GERMANY

Track Saw

T10687 $199.95 SALE $1799548T Replacement Blade

T25331 ONLY $1995

55" Guide Rail

T24872 ONLY $5095Accessory Pack*

T25094 ONLY $2495

441-800-523-4777

FREE760 PAGE

2014 CATALOG

FOLLOW US ON

PORTER CABLELAMINATE TRIMMER 7310 21⁄2" X 14" COMPACT BELT

SANDER 371K• Sands up to 90° angle surfaces • 5A, 500MWO motor• Dust sealed recessed switch• Built to be comfortable yet durable• Includes Kit box, dust port & removable auxiliary handle• Weighs: 5 lbs.

• Tool-free accessory change requires no bolts or wrenches

• Powerful 2.5A motor provides high torque for smooth cutting

• Variable speed dial offers maximum control across applications

• 10-foot cord• Includes Kit box with a wide assortment of

accessories

VARIABLE-SPEED MULTI-TOOLPC250MTK

• Ultra compact size and light weight is ideal for fitting into tight areas and for overhead applications

• Drill/driver has a 2-speed gearbox for high-speed drilling and high-torque fastening and an adjustable clutch with 20 settings

• Impact technology delivers 950 in/lbs. torque without kick-back

• Drill/driver’s 3⁄8" single sleeve chuck with spindle lock provides high grip torque for bit retention

• Impact driver with 1⁄4" hex quick-release chuck for fast accessory changes

• Variable speed triggers deliver maximum control in all applications

COMPACT 12V DRILL/IMPACTCOMBO KIT PCL212IDC-2

QUIKJIG™ POCKET HOLE JOINERY SYSTEM 560• Rear-exit dust collection• 11⁄2" thick base casting: allows use of a 2x4 for outrigger

support • Adjustable hole spacing for added versatility• Automatic drill depth, no adjustment for material

thickness • On-board screw gauge eliminates fastener guesswork

• Repeatable clamp handle for fast clamping with consistent material thicknesses

• Pre-drilled base for easy mounting. Flattens for easy clamping.

• 7.5A, 120 VAC only, 10,000 RPM• Fence tilts from 0–135°• 1" O.D. dust port accepts standard bag or can be

connected to a vacuum• Includes 4" blade, centering plate, spanner wrench, dust

bag and chip deflector

PLATE JOINER KIT 557

• Drill/Driver features an all metal 1⁄2" single sleeve chuck and 2-speed gearbox • 61⁄2" Circular Saw features a spindle lock allows for quick and easy blade changes• Reciprocating Saw delivers 3000 SPM for fast cutting

Includes:• PCL180D Compact Drill/Driver• PCL186CS 61⁄2" Circular Saw• PCL180RS Reciprocating Saw• PC180FL Pivoting Head Flashlight• (1) PC18BLX Lithium Battery• (1) PC18BLEX Extended Runtime Battery• Manufacturer 3 Year Limited Warranty

LI-ION 4-TOOL COMBO KIT PCL418C-2

18V LITHIUM-ION 4-TOOL COMBO KIT PCL418IDC-2• At only 3.8 lbs., the compact drill/driver reduces user fatigue • Drill/driver features 2-position gearbox & 1 ⁄ 2" metal single sleeve chuck • Impact driver delivers 1600 in/lbs. high-torque output without kickback• Impact driver fits into tight areas not accessible by larger impact drivers • Includes PCL180D compact drill/driver, PCL180ID impact driver, PCL180RS reciprocating saw & PC180FL flashlight, (1)PC18BLEX extended runtime 18V lithium-ion battery, PC18BLX 18V lithium-ion battery.

24" OMNIJIG® 77240Includes jig base, 24" variable finger template, instructional DVD featuring Norm Abram, left and right template stops—A4, B1 & C1, dovetail bit—D4, straight bit—S2, 7 template guides—G0, G1, G2, G3, G4, G5 & G6, router bit depth pod, dovetail set-up guide, square screwdriver, wrench, and 2 o-rings. Weighs 78 lbs.

• 5.6 Amps, AC/DC• 30,000 RPM• 1⁄4" collet• Spindle lock• Precision cast

aluminum base• Includes collet

wrench

H3720 $182.00 SALE $7500 H9313 $119.95 SALE $9995 T22433 $119.95 SALE $9995

G9546 $380.00 SALE $18995T22373 $149.95 SALE $10495

T22637 $279.95 SALE $23995 T22067 $599.95 SALE $58995T22380 $229.95 SALE $16995

T22636 $269.95 SALE $20995

$49$49shipping

lower 48 states

45 grizzly.com®




DEWALT

• Frameless motor with replaceable brushes• Compact size & lightweight design• 1,330 in/lbs of torque to perform a

wide range of fastening applications• 0-2,400 RPM/0-2,700 IPM• Textured anti-slip comfort grip• Durable magnesium gear case and

all-metal transmission for extended durability

• Heavy-duty impact mechanism directs torque to fastener without kickback

This 18V, 1⁄2" Drill/Driver Kit has a shorter, more compact design to fit into tight spaces. Two collar design allows for mode change while maintaining clutch setting. Three speed transmission offers the ability to optimize the tool to any accessory. LED work light provides increased visibility in dark confined spaces. Ergonomic handle design for increased comfort and less user fatigue.

A reliable and well-built nailer deigned to work as hard as you do! Designed to work as an oil free and oil lube unit, and includes tool-free features such as an adjustable belt hook, nail depth adjustment, jam clearing, and a 360° exhaust. Sequential action trigger and a trigger lock-off for safety. Uses 1" to 21⁄2" (25.4mm-65mm) 34° collated nails, rear load and a low profile no-mar pad to protect your workpiece. 70-120 PSI operating pressure and a lightweight build at 3.85 lbs (1.75 kg). Includes carrying case, sample finish nails, two wrenches, and safety glasses.

18V XRP® IMPACT DRIVER KITDC825KA

20V MAX CORDLESS LITHIUM-ION DRILL DRIVER AND 12V MAX SCREWDRIVER COMBO KIT DCK295L3

18V XRP™ 9-PC. COMBO KIT DCK955X

18V XRP™ HAMMERDRILL/IMPACT DRIVER COMBO KIT DCK255X

18V COMPACT HEAVY-DUTY IMPACT DRIVER DC827KL

18V 1⁄2" DRILL/DRIVER DCD940KX 15 GA 11⁄4" - 21⁄2" ANGLED FINISH NAILER KIT D51276K

18V 1⁄2" HAMMERDRILL/DRIVER DCD950KX

Build your own jigs to handle a wide range of woodworking applications anywhere on a steel table. Patented Magswitch technology allows magnetic force to be switched on and off, allowing for fast, easy setup and adjustment. Simply turn knob clockwise to engage the magnet; turn counter-clockwise to disengage magnetic field.

18V COMPACT HAMMERDRILL/ IMPACT DRIVER COMBO KIT DCK266L

18V COMPACT HAMMERDRILL/ IMPACT DRIVER COMBO KIT DCK988X

20V COMPACT BRUSHLESS 1 ⁄4" IMPACT DRIVER DCF895C2

13 INCH PLANER WITH 3 KNIVES AND 2 SPEEDS DW735X• 15 AMP, 20,000 RPM motor •10,000 RPM cutterhead

speed • Three knife cutter-head • Two speed gear box• 193⁄4" cast aluminum base • Material removal gauge• Includes infeed and outfeed tables and an extra set of

knives

• 20V MAX* 3.0 Ah Li-Ion Premium 3-Speed Drill Driver - DCD980

• 12V MAX* 1⁄4" Screwdriver - DCF610

• (2) 20V MAX* 3.0 Ah Li-Ion Battery Packs

• 12V MAX* Battery Pack• Slide Handle • Belt Hook• Charger • Contractor Bag

• XRP™ extended run-time batteries provide long run-time and battery life

• Patented 3-speed all-metal transmission• Heavy-duty 1⁄2" metal ratcheting chuck with carbide inserts• LED worklight• High power, high efficiency

motor delivers 450 unit watts out of max power for superior performance

• Best in class length for improved balance and better control

• Includes a 1 hour charger, (2) 18V XRP™ batteries, 360° side handle and kit box

• DCD950 18V XRP™ 1⁄2" Hammerdrill• DC825 18V 1⁄4" Impact Driver• (2) 18V XRP™ batteries• 1 hour charger• 360° side handle• Contractor Bag

• Frameless motor • Compact size & weight• 1,330 in/lbs of torque • 0-2,400 RPM/0-2,700 IPM• Replaceable brushes • Textured

anti-slip grip• Durable magnesium

gear case and all metal transmission

• Heavy-duty impacting mechanism

• Long battery life & durability: 2,000 recharges

• DC988 18-volt 1⁄2" Hammerdrill max speed: 2,000 RPM• Max BPM: 34,000 • 1⁄2" chuck features durable carbide jaws • DC825 1⁄4" Impact Driver produces 1,330 in./lbs. • High speed motor provides 0-2,400 RPM • Variable speed reversing switch • LED work light • DCK988X comes with two 18-volt cordless XRP batteries, one-hour charger, and contractor bag

• DCF895 1⁄4" Impact Driver• (2) 20V MAX* Lithium ion• 1.5Ah Battery Packs• 30 Minute Fast Charger• Belt Hook and

Accessory Storage Kitbox

• DCD950 XRP™ 18V 1⁄2" hammerdrill/drill/driver• DC390 XRP™ 18V 6-1/2" circular saw • DC385 XRP™ 18V

reciprocating saw • DW059 18V 1⁄2" high-torque impact wrench • DC825 18V impact driver

• DC330 XRP™ 18V variable speed jig saw• DC411 18V cut-off tool • DC550 18V cut-out tool • DC919

Flexible Floodlight• 1 hour

charger • (2) 18V

XRP™ batteries

FREE WITH PURCHASE!DWP611 Compact RouterT22355—a $149.95 value

$49$49shipping

lower 48 states

T22273 $249.95 SALE $21995 T22222 ONLY $62995 T22613 $269.95 SALE $23995

T22169 $279.95 SALE $21995

T22738 $199.95 SALE $11995 T22170 $299.95 SALE $21995



461-800-523-4777

CLEARANCELIMITED QUANTITIES—WHILE SUPPLIES LAST!

NO BACKORDERS

HOBART STICKMATE LX WELDER HOBART 4500 WATT 10 HP GENERATOR / DC WELDER• 230V single phase

• Offers increased weld time as amperage decreases

• Infinite current control• Includes 15' electrode cable w/ HD

holder, 10' work cable w/ clamp, and 6' power cable w/ plug.

• Approx. shipping weight: 111 lbs.

• 4,500 watts surge generator power• 4,000 watts continuous generator power• 145 amp DC welder for up to 5⁄ 32" diameter

DC stick electrodes• Versatile receptacle package:• Four 20-amp 120 VAC GFCI receptacles with

heavy-duty cover• One 240 VAC (6-50R) receptacles with heavy-

duty cover• Rugged and lightweight - 216 lbs (98 kg)• Includes running gear• Large silencer muffler for quieter operation

SCREW TIP AUGER BITS SPADE BITS

• Max. working width: 50"• Max. sheet metal thickness: 16-ga. mild

steel at full width• Max. clamping beam lift: 17⁄ 8"• Max. height of pan/box sides: 2"• Max. bending angle: 135°• Finger size/quantities: (6) 4", (5) 3", (4) 2", and (2) 11 ⁄ 2"• Foot controlled clamping beam• Spring counterbalanced bending beam• Overall dimensions: 63" wide x 443⁄4" high x 351 ⁄ 2"

deep • Weight: 945 lbs.

50" PAN & BOX BRAKE

• Cuts faster than oxy/fuel• Cuts any conductive metal• 16.5 ft. (5m) torch &work clamp leads

Designed to cut up to 1 ⁄4" mild steel and powered by standard 115 VAC, the AirForce™ 250ci Plasma Cutter has a built-in air compressor and lightweight inverter power supply, making it the most convenient, totally portable cutting system available.

HOBART AIRFORCE 250CI PLASMA CUTTER

• Engine: 6.5 HP Briggs & Stratton®, air cooled, overhead valve• Maximum log length: 24"• Maximum pressure: 3000 PSI• Hydraulic fluid capacity: 2.5 gallons• Coupler size: 2" ball• Off road use only: Max. 12 MPH• Overall dimensions: 88" long x 40" wide x 45" high• Approximate shipping weight: 602 lbs.

22 TON HYDRAULIC LOG SPLITTER

Cannot ship into California.

ULTRASONIC CLEANER 2.5L 220VThe Ultrasonic Cleaner SR4270 has a larger capacity and works great for big quantites of cases or for large gun parts such as 1911 slides and frames. The ultrasonic cleaning action removes carbon residues from cases or gun parts.It fits about 360 .223R. cases or 180 .308W. cases.Capacity. 2.6 Quarts.

The tapered screw-tips on these Auger Bits help to make sure your holes end up where you want! Hex shank is sized to fit into 3⁄ 8" or larger hand drills (not recommended for use in drill presses). Standard length sizes average 9" in length.

For general wood boring applications, this quality spade bit features extended cutting spurs for crisp edges and TiN coating for long dependable life.

D2201

D2034

D2048D2049

D2203

D2214

G7585 $599.95 SALE $44995 T24266 $1799.95 SALE $145000

G0479 $1895.00 SALE $139500 T20236 $899.95 SALE $69995

G0639 $1375.00 SALE $89500T10578 $229.95 SALE $9995

$179$179shipping

lower 48 states

$150$150shipping

lower 48 states

$79$79shipping

lower 48 states

$79$79shipping

lower 48 states

MODEL SIZE SALED2034 1⁄4" $125

D2037 7⁄16" $149

D2039 9⁄16" $150

D2043 13⁄16" $189

D2044 7⁄8" $195

D2047 11⁄8" $239

D2048 11⁄4" $259

D2049 13⁄8" $269

D2050 11⁄2" $275

MODEL SIZE SALED2201 9⁄16" $549

D2203 11⁄16" $575

D2205 13⁄16" $595

D2207 15⁄16" $749

D2210 13⁄16" $795

D2212 15⁄16" $549

D2214 17⁄16" $975


CLEARANCELIMITED QUANTITIES—WHILE SUPPLIES LAST!NO BACKORDERS

Dispenser pack has popup feature for easy socket access. Kit includes: 1⁄4" drive ratchet, 3" extension 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", and 1⁄2" SAE, and 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm 12mm, and 13mm metric sockets.

This knife-setting system lets you set planer knives in perfect alignment every time! It also allows you to shift nicked knives on 21⁄2" to 4" diameter cutterheads to get a perfect cut to an accuracy of ± .002". Sold individually.

21-PC. RATCHET SOCKET DISPENSER KIT

DISPOZ-A-BLADE® SYSTEM

PLANER PAL®

STANDARD/CARBIDE

Full insulation protects your important files. Drawers on ball bearing slides have inside dimensions of 151⁄4" W x 115⁄8" H x 25" D. Measures 213⁄4" W x 34" H x 321⁄2" D overall. Approximate shipping weight: 550 lbs.

9.6V COMPACT IMPACT DRIVER DC855KA

2-DRAWER FIRE RESISTANT FILE CABINET

34° CLIPPED-HEAD FRAMER • Shoots 2"–4" clipped-head nails• Accepts most all 34° framing nails on the market • Depth-of-drive adjustment• 360° Exhaust port adjustment• 500,000-shot guarantee

with Grizzly nails• Includes carrying case,

bottle for oil, repair piston O-rings, and wrenches

• Weighs 7.85 lbs.

• 960 inch/lbs. of turning force• 9.6V XRP extended-run battery• Frameless motor w/ replaceable brushes• Compact size• Includes: two 9.6-volt XRP

extended-run batteries, one-hour charger, and a storage case

• Three-year limited warranty

23⁄4" COIL NAILERCOIL ROOFING NAILER• The fastest, lightest, and most

powerful coil nailer in its class• Patented automatic single-shot/

bump fire switch • Includes piston O-ring repair

kit• Shoots 15°, 11 ⁄ 2"–23⁄4" wire coil

nails• 1,000,000-shot guarantee with

Grizzly nails• 360° Adjustable exhaust port• Weighs 6.2 lbs.

• Patented dial depth-of-drive adjustment• Includes piston O-ring repair kit• Shoots 15°, 3⁄4"–13⁄4" wire coil nails• 1,000,000-shot guarantee with Grizzly nails• Fast 1 ⁄ 15 second cycle rate• Includes carrying case,

bottle for oil, and wrenches

• 1 ⁄4" NPT inlet• Weighs 5.5 lbs.

MADE IN TAIWAN

MADE IN TAIWAN

16-GAUGE 2" ANGLE NAILER WITH NAILS• Shoots 7⁄ 8"–2" brad nails• 400,000-shot guarantee with Grizzly nails• Includes carrying case, wrenches, and 1500-pc.

assortment of 1", 11 ⁄4", and 2" nails• Weighs 3.05 lbs.MADE IN TAIWAN

• Welder: 140 Amp AC stick• Generator: 4800 continuous,

5300 surge watts with four 110V and one 230V twist-lock outlets

• Compressor: 16 gallon, 10.2 CFM @ 90 PSI

• Weighs 542 lbs.

2500 WATT 5 HP GENERATOR CH250

• 2500 Watt maximum output, 3125 surge watts • Honda GC 5HP engine with brushless alternator

• 2.5-Hr run-time @ half load• 69.5 dB running noise level• 120 VAC duplex outlet

4800 WATT AIR COMPRESSOR, GENERATOR, WELDER

• 10,000 Watts• 12,500 starting watts• 8-Hour run time @ 1 ⁄ 2 load • 7 Outlets• Electric start—battery

included• Automatic voltage

regulation• Weighs 288 lbs.

10,000 WATT PORTABLE GENERATOR

Cannot ship into California.Cannot ship

into California. Cannot ship into California.

MADE IN TAIWAN

T23143 $3795.00 SALE $324495

H7951 $295.00 SALE $15995

T21541 $875.00 SALE $58995

H8156 $22.00 SALE $1195 W1215 $100.00 SALE $6995

H9324 $700.00 SALE $42995

H7995 $150.00 SALE $8995

H7995 $150.00 SALE $8995

T20231 $2195.00 SALE $179500

H7950 $320.00 SALE $20495

H7950 $320.00 SALE $20495

$150$150shipping

lower 48 states

$79$79shipping

lower 48 states

$99$99shipping

lower 48 states

$150$150shipping

lower 48 states

14", 3 Knife, for G9861H2252 $230.00 SALE $8995

16", 4 Knife, for G9953H2253 $380.00 SALE $19995

24", 4 Knife, for G9741H2256 $460.00 SALE $23995

20", 4 Knife, for G9740/G9967H2255 $425.00 SALE $22995

481-800-523-4777 FOLLOW US ON

CLEARANCE LIMITED QUANTITIES—WHILE SUPPLIES LAST!NO BACKORDERS

LARGE FIRE RESISTANT GUN SAFE

SAW GUIDE RAILS

BUFFING WHEELS

GUITAR CABLES

Domet flannel is the softest buffing wheel available for an absolute scratch-free finish. Airway design keeps the object being buffed cool. SPONGE PADS14V DELUXE CORDLESS DRILL

PARTS LAZY SUSAN - FLOOR MODEL

These Sanding Sponges with sharp silicon carbide grit and foam backings provide conformability for hand finishing.

This 14V Deluxe Cordless Drill features 0-700 RPM variable no-load speed, forward and reverse, 5 clutch settings plus drill setting and keyless 3⁄8" chuck. Kit includes drill, 2 NiCd batteries, battery charger, Phillips #2 bit and case.

These Saw Guide Rails provide a wide clamping surface for a variety of front and rear hold-down clamps. Circular saw base plate rides against Saw Guide edge for perfect straight line cuts. Adjustable handles for easy positioning.

Perfect for the storage of components in a small amount of space. Full 360 degree rotation allows easy access. Has four 193⁄4" diameter shelves with six compartments on each shelf and is 371⁄2" tall. Four swivel casters make it easy to maneuver the parts storage right next to the job to be done.

Three number combination. Large interior compartment with storage for up to 8 rifles/shotguns. 4 interior shelves, 2 of which are adjustable for handgun or ammunition storage. Interior locking compartment provides extra security for special items. Overall dimensions are 271⁄2"W x 20"D x 59"H. Predrilled holes in the bottom for bolting to the ground. Rated for 1700° F at 30 minutes. Weighs 397 lbs.

EXCELLENT FOR LINKING EFFECTS

PEDALS

H6079

H6074

H6077

H6081

H7751

H7753• 1⁄4" Gold-plated connectors deliver best sound signals• Metal spring-type connector cover prevents kinking• Hook & loop cord wrap for convenient storage

H7793 $89.95 SALE $4995

H5674 $850.00 SALE $79500

H0766 $64.95 SALE $3995

10" x 60 Ply x 11⁄4" Loose MuslinH2837 $18.95 SALE $895

12" x 16 Ply x 11⁄4" Domet FlannelH2793 $19.95 SALE $795

12" x 60 Ply x 11⁄4" Loose MuslinH2792 $22.95 SALE $1295

8" x 5⁄8" Hard Bias BuffT24277 $6.95 SALE $395

8" x 40 Ply x 5⁄8" Loose MuslinT24282 $10.95 SALE $595

33⁄4" x 47⁄8" x 1⁄2", A400T23438 $3.95 SALE $195

33⁄4" x 47⁄8" x 1⁄2", A280T23436 $2.95 SALE $195

33⁄4" x 47⁄8" x 1⁄2", A220T23435 $2.95 SALE $195

23⁄4" x 4" x 1", 320 GritT23441 $3.95 SALE $195

55" Guide RailT23941 $25.95 SALE $895

36" Guide RailT23940 $15.95 SALE $695

24" Guide RailD3702 $12.95 SALE $425

MODEL TYPE LENGTH REG. SALEH6074 Black Guitar Cable 10' $8.95 $495

H6075 Black Guitar Cable 15' $9.95 $595

H6076 Black Guitar Cable 20' $11.25 $595

H6077 Braided Guitar Cable 10' $9.95 $695

H6078 Braided Guitar Cable 20' $8.95 $895

MODEL TYPE LENGTH REG. SALEH6079 Red Guitar Cable 10' $10.95 $795

H6080 Red Guitar Cable 20' $13.95 $995

H7751 Deluxe Brown Guitar Cable 10' $11.95 $895

H7752 Deluxe Brown Guitar Cable 20' $15.95 $1095

H7753 Deluxe Black Guitar Cable 10' $12.95 $995

H7754 Deluxe Black Guitar Cable 20' $15.95 $1095

Set of 3 12" Patch CablesModel H6081

only $995

$99$99shipping

lower 48 states

49Order at grizzly.com® • By Fax: 1-800-438-5901

Customer Service: 1-570-546-9663 grizzly.com®

CLEARANCELIMITED QUANTITIES—WHILE SUPPLIES LAST!NO BACKORDERS

8-PC. FLAT END FOLDING HEX KEY SETThis professional quality 8-Piece Flat End Folding Hex Key Set features hardened and tempered chrome vanadium steel and is satin-chrome plated. Sizes include: 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8".

14" OFFSET PIPE WRENCH 7" LINEMAN’S PLIERS 8" PRUNING SHEAR

This industrial quality 9-Piece Extra Long Flat End Hex Key Wrench Set is made from hardened and tempered chrome vanadium steel and features a satin chrome plated finish. Convenient storage caddy included. Sizes include: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8".

With a 22° offset, this Pipe Wrench is perfect for tight spots that would be tough to reach with a regular pipe wrench. Heavy-duty cast iron construction with hardened steel jaws and vinyl grips. This Offset Pipe Wrench is 14" long and has a 2" capacity.

Ergonomic T-handles and extra long stems provide tremendous torque for turning socket head screws. The long ends have ball tips for reaching tight spots and the short ends have straight hex profiles. Made from hardened chrome vanadium steel for long life. SAE sizes include: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8". Each set includes a fitted case.

This professional quality 8-Piece Ball End Folding Hex Key Set features hardened and tempered chrome vanadium steel that is satin-chrome plated. Ball end allows up to 30° offset alignment. Sizes include: 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8"

Set includes 2-way mini ratchet handle, driver extension, 1⁄4" socket adapter, (7) sockets (1⁄4" drive) - 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8", 7⁄16" & 1⁄2", (3)Torx® bits - T15, T20 & T30, (4) straight bits - 1⁄8", 3⁄16", 1⁄4" & 9⁄32", (3) Phillips® bits - #1, #2 & #3 and plastic storage tray for bits.

These 7" Lineman's Pliers feature side cutters, gripper teeth, and square noses. Vinyl grips improve comfort & handling. Overall length is 7".

Compact Pruning Shears are great for miniature plants, cut flowers and harvesting vegetables from the garden. Scissor action cuts tender plants without crushing and non-slip vinyl grips provide plenty of hand control.

6-PC. BALL END FOLDING HEX KEY SET

9-PC. T-HANDLE SAE BALL HEX SET

9-PC. EXTRA LONG BALL END HEX KEY WRENCH SET

9-PC. EXTRA LONG FLAT END HEX KEY WRENCH SET

This 9-Piece Short Flat End Hex Key Wrench Set is industrial quality. Features hardened and tempered chrome vanadium steel and includes a convenient storage caddy. Sizes include: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8".

9-PC. SHORT FLAT END HEX KEY WRENCH SET

These 9-Piece Extra Long Ball End Hex Key Wrench Sets are chrome vanadium steel, hardened and tempered. Ball end allows up to 30° offset alignment. Includes convenient storage caddy. Extra long hex keys for maximum torque. Sizes include: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8".

• Professional quality• Chrome vanadium steel• Hardened and tempered• Satin-chrome plated• Ball end allows up to 30° offset alignment• Sizes include: 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16" and 1⁄4"

• Professional / Industrial Quality• Chrome vanadium steel• Hardened and tempered• Satin chrome plated• Ball end allows up to 30° offset alignment• Convenient storage caddy• Sizes include: 1⁄16", 5⁄64", 3⁄32", 1⁄8",

5⁄32", 3⁄16", 1⁄4", 5⁄16" & 3⁄8"

8-PC. BALL END FOLDING HEX KEY SET

9-PC. LONG BALL END HEX KEY SET

20-PC. RATCHET SOCKET /BIT SET

H8054 $5.00 SALE $225

H8053 $8.95 SALE $325 H8055 $4.95 SALE $295H8050 $4.95 SALE $195

H8200 $13.95 SALE $995

H6209 $11.95 SALE $695 H6211 $7.75 SALE $295

H8051 $5.95 SALE $295

H6214 $5.95 SALE $195


501-800-523-4777

CLEARANCE LIMITED QUANTITIES—WHILE SUPPLIES LAST!NO BACKORDERS

12" BOW SAW EXTREME FORCES SEMI-SERRATED

HEIRLOOM COUNTRY/BLUEGRASS ALDER GUITAR KIT

SCRIMSHAW BABY STUBBY® ENGLISH SETTER

Great for camping and for pruning chores around the house, this Bow Saw features a high tension, quick lever-action blade holding mechanism, contoured vinyl grip with protective hand guard and aggressive raker and side-cutting tooth pattern. The effective cutting length of this 12" saw is 10" and the throat capacity is 61⁄2".

This specially designed saw has teeth set only on one side so that enough of the tenon, wedge or plug is left to sand flush with surrounding surface. Teeth are ground to cut only on the pull stroke, allowing greater control and safety. This is an economical alternative to many of the more expensive European flush-cut saws.

PLUG CUTTING SAW

PANDA® SKINNING AXE VENOM® SEMI-SERRATED

JUNGLEE SOLACE® TRI-FORCE RAZOR

FOLDING STEEL WIRE CONTAINER

Features a broad gutting hook and a finger-contoured shaft. Measuring 15" overall, with a sweeping Ulu-style blade, the AUS-8 modified stainless steel Panda® has soft Kraton® rubber grips and a full-tang. Leather sheath included.

• 15⁄8" blade, 23⁄8" closed and weighs 1.2 ounces• Lighter than lightweight, this Scrimshaw Baby Stubby

packs a ton of features in a small package• Raised-relief aluminum grips in black with synthetic ivory

inlaid scrimshaw etchings of some of our best friends• This one handed folder features skeletonized 420-J2

stainless steel blade with aluminum scales

You'll be proud to say you made this beautiful classic rock style guitar with its solid alder body and precision-fit components. This kit includes all the parts to make a functioning guitar. Add your own creative touches to the peghead and the finish application for a truly custom instrument. Requires a woodworking basic skill level and basic tools for assembly. Complete instructions are included.

This Steel Wire Container is foldable, stackable and the contents are easily visible for inventory and stocking purposes. With 27 cubic feet of bin space and a double drop down gate for easy loading and unloading, this Steel Wire Container is forklift compatible. Overall size is 43" wide x 39" high x 321⁄2" deep. Folded size is 12" high.

JUNGLE TOOL® WITH POUCH

STAINLESS STEEL!

• Shovel: 17 1⁄2" overall• Knife: 4 5⁄16" blade; 10 1⁄2" overall• Total tool weight: 27 oz.

Crafted from top quality AUS-8 stainless steel and genuine textured Kraton® rubber grips, the Junglee® Short Sword delivers a graceful 141⁄2" blade sweep that’s perfectly suited to hunting or survival use. The Short Sword offers a rugged matte Teflon® coated finish for added rust and corrosion resistance. Includes a tough Kydex® sheath. Well balanced! 141⁄2" blade and 211⁄4" overall. AUS-8. 16.3 oz.

SHORT SWORD

DESIGNED BY S. BALOLIA.

• 83⁄4" Overall• 313⁄16" Blade • ATS-34 Steel Alloy

• 87⁄8" Overall• 315⁄16" Blade• ATS-34 Steel Alloy• Black Teflon® coated• Kraton® soft rubber inlays

• 83⁄4" Overall• 313⁄16" Blade• ATS-34 Steel Alloy• Black Teflon® coated• Kraton® soft rubber inlays

• 81⁄4" Overall • 31⁄2" Blade • 440A stainless steel

G9064

G9065

You must be at least 18 years of age to order knives. Adult signature is required at time of delivery.

D1043 $8.95 SALE $195

T25386 $42.50 SALE $1495

T23116 $175.00 SALE $10995G9236 $12.95 SALE $345

H6125 $9.25 SALE $395

G8743 $60.00 SALE $3495

G8745 $140.00 SALE $5995 G9065 $60.00 SALE $2095

G9064 $60.00 SALE $2095

H4291 $100.00 SALE $4995

G9063 $50.00 SALE $1995

T24150 $30.00 SALE $895

T25414 $249.95 SALE $19995

Semi-serrated

$79$79shipping

lower 48 states

51

■ PHONE – 1-800-523-4777: You can order 24 hours a day. Call our toll-free number between 8:00 am - 8:00 pm, Mon - Fri or 8:30 am - 6:00 pm ET on Saturdays to speak with one of our friendly sales people or you can use our

automated voice mail system. Just follow the options to place your order.■ INTERNET – www.grizzly.com®: You can shop electronically via our online store.

It’s fast, easy and secure. Visit often since we have many specials and discontinued items not offered in our catalog or retail stores. We will e-mail you confirmation of your order.

■ FAX – 1-800-438-5901: You can use our handy order form and fax it directly to us. We will process your order through our nearest distribution center for fast delivery.

■ SPANISH – Hablamos Español - Llámenos al 1-800-523-4777.

■ MAIL – P.O. Box 1050, Springfield, MO 65801-1050: Fill out the order form by following Step 1 through Step 5. We accept Visa, MasterCard, Discover, American Express, money orders, bank wire transfer and personal or business checks. Send full payment in U.S. funds. Important: Checks not preprinted with the customer’s name and check number will hold up the order for approximately 3 weeks. Please include your daytime telephone number in case there are questions regarding your order.

■ PARTS ORDERS – Please call our toll-free line at 1-800-523-4777 for part orders. Parts are also available online at grizzly.com®. All parts are shipped from our Springfield, MO location and non-warranted parts are subject to shipping and handling charges as listed. Please have your machine serial number available when calling for warranty parts.

Grizzly warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs, improper wiring, alterations, lack of maintenance or consumable parts. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that our merchandise complies with the provisions of any laws, acts or electrical codes. We do not reimburse for third party repairs, services, or any expenses related to moving machinery to and from carrier vehicles or residences. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products.To take advantage of this warranty please call our Customer Service Department at 1-800-523-4777. Proof of purchase must accompany the merchandise. Manufacturers reserve the right to change specifications at any time as they constantly strive to achieve better quality equipment.Please Note: Merchandise covered by a manufacturer’s warranty must be sent directly to the manufacturer for repair or replacement.

SHIPPING YOUR ORDER: We make every effort to ship your order within 24 hours. In most cases it will go out the same day. Due to our 3 centrally located warehouses, motor freight shipments usually arrive in 3–5 working days. Standard orders (non-freight items) will typically arrive in 2–3 working days. This information should be used as a general guide and is not guaranteed.NON-FREIGHT ITEMS: *Non-freight items are assessed a shipping and handling fee based on the total dollar amount of the items. Due to size and weight restrictions, some items require additional shipping and handling charges. These items are individually noted. Orders for non-freight items with a total weight of over 250 lbs. may be shipped via truck freight and will incur additional shipping charges. Orders that do not include freight items will be shipped by ground transportation unless otherwise specified. Orders to Alaska, Hawaii, Guam, Puerto Rico, Virgin Islands, and U.S. Territories will be quoted at current rates. Canadian orders will be shipped by UPS only, and are subject to a minimum order size of $50.00 (repair parts excluded). Brokerage, duty and taxes will apply. Special handling costs or shipping fees may be added to your order, and all orders may be subject to a fuel surcharge. Shipping charges for parts may vary from published charges.

SHIPPING AND HANDLING CHARGES: (Non-Freight Items)

Item Total Lower 48 Canada Less than $25 add $7.95 N/A $25.00 to $49.99 add $9.95 N/A $50.00 to $74.99 add $11.95 add $19.95 $75.00 to $99.99 add $13.95 add $19.95 $100.00 to $199.99 add $16.95 add $29.95 $200.00 to $299.99 add $19.95 add $39.95 $300.00 or more add $23.95 add $49.95TRUCK FREIGHT ORDERS:* We have a flat rate shipping program for certain items so you know exactly what your cost will be. Items under 150 lbs. may ship by small parcel carrier. This program applies only to the lower 48 states. We have listed the shipping charge for each machine next to the price (a fuel surcharge may be added). See inside order form for an example of how to apply this to your order. Shipping rates for truck freight orders to Canada will be quoted during the checkout process on grizzly.com® and are also available via phone at 1-800-523-4777.*Orders that contain freight as well as additional S/H charges due to oversize restrictions and non-freight items must include the flat rate shipping fee per item and the shipping and handling fee based on the total dollar amount of those non-freight items. All orders may be subject to a fuel surcharge.Truck drivers are subject to a number of regulations, one of which is that they are not required to give assistance unloading. Please be prepared for this “curbside” delivery, as you are responsible for unloading the item(s) and placing them in your shop. This normally takes a couple of “friends”. Your location must be tractor-trailer accessible. Some carriers reserve the right to charge a limited access delivery fee, which will be added to your invoice if applicable. We recommend that you make arrangements with the trucking company to take delivery at the freight terminal if you can. They will load it onto your vehicle. Make sure your vehicle is capable of handling the weight. Also, bring plenty of tie downs to properly secure the load.We can offer liftgate service for a discounted rate when ordered through Grizzly. Please ask for more details when placing your order.

SHIPPING DAMAGE: When you receive your shipment from the trucking company, it is extremely important to inspect and note any damage that might be suspect. Holes, dents, tears, etc. should be noted on the form the driver gives you to sign accepting delivery. These notations will allow us to make a claim for shipping damage on your behalf. Failure to do so makes it extremely difficult to make a claim. If there is shipping damage and you have noted it on the delivery form, you can e-mail us at [email protected], call our Customer Service Department at 1-800-523-4777 or fax us at 1-800-438-5901. We will take care of all the necessary arrangements to have the problem resolved.

SHIPMENTS OUTSIDE THE CONTINENTAL U.S. AND CANADA: Orders will be quoted at current rates. Items will be shipped via UPS. Special handling costs, additional shipping fees and applicable brokerage fees may be added to your order.

BACK ORDERS: If not specified, out of stock items will automatically be placed on back order and shipped immediately when available. Credit cards will not be charged until item(s) are shipped.

RETURNS: Should you decide to return an item(s) for any reason, be it for refund, exchange, or warranty, please contact our Customer Service Department at 1-800-523-4777. We will take you step by step through the return process. Returns for refund or exchange must be within 30 days of purchase. Original shipping and handling charges are not refundable. All returns must be in original packing, unused and in resalable condition and all non-defective returns are subject to a 10% restocking fee. All merchandise must be shipped to us using an authorized return label that we provide when setting up your return. We will not accept returns sent to us without prior authorization.

TECHNICAL SERVICE: Please contact our Technical Service Department at 1-570-546-9663 before sending or bringing any item back for service. For machinery, please have your serial number available. If it is determined that the best course of action is to send the item back to us for service, we will make every effort to repair and return it to you in a timely manner.

DARN IT! We make every effort to be exact with our photography, prices, specifications and copy. Sometimes errors do occur and we apologize for them. We reserve the right to make changes and correct errors at any time.

PRIVACY POLICY: We respect your right to privacy and do not disclose your personal data to other organizations.

LEASING INFORMATION: Machines identified by “Call for Leasing Information” may be leased with approved credit through various third-party leasing companies. Just check our website or give us a call at 1-800-523-4777 and we’ll provide the details.

CREDIT TERMS: We offer credit terms to qualifying companies; apply for an account online at grizzly.com®. Terms and Conditions contained in customer purchase orders, order forms, or otherwise are superseded in their entirety by our terms as stated on our website and herein unless expressly agreed to by us in writing.

PLEASE NOTE: Our terms, conditions, pricing and policies are subject to change without notice at any time, and are updated on grizzly.com®.

Due to rapidly changing market conditions our catalog prices may be increased at any time without prior notice. Our website is updated with any changes as they occur.

LIMITED WARRANTY

ORDERING INFORMATION

PRICING POLICY

CUSTOMER SERVICE

52

16259 ©2014

Grizzly Industrial, Inc.

Fax: 800.438.5901Technical Service:

570.546.9663

1821 Valencia Street • Bellingham, WA 98229 Hours: Mon–Fri 8:30 AM–5:00 PM

MAY 10th, 8 AM–2 PMJUNE 7th, 8 AM–2 PM

MAY 17th, 8 AM–2 PMSEPT. 13th, 8 AM–2 PM

1815 W. Battlefield • Springfield, MO 65807Hours: Mon–Sat 8:30 AM–6:00 PM(Parts Dept. Closed Saturdays)

1203 Lycoming Mall Circle • Muncy, PA 17756Hours: Mon–Sat 8:30 AM–6:00 PM

EXIT 17

P.O. Box 2069, Bellingham, WA 98227-2069

PRICING CODECUSTOMER NO.

PRESORTEDSTANDARD

U.S. POSTAGE

PAIDGRIZZLYINDUSTRIAL, INC.

ALL THREE FACILITIES!

Check out GRIZZLY.COM/OUTLET for Incredible Deals!

check our website grizzly.com® for information on accommodations, etc.

FREE TRADE MAGAZINES & 1-DAY ONLY

SHOWROOM SPECIALS!

All sales are on a first come, first serve basis, so get there early for the best deals and the largest selection!

✤ If you have ever been to a Grizzly “Scratch & Dent” Tent Sale, you understand why woodworkers and metalworkers form long lines to get in early. Grizzly liquidates an impressive quantity of scratched, dented and as-is woodworking and metalworking machines, tools, and accessories, as well as samples and one-of-a-kind items. This is definitely an event that no bargain hunter should miss!

✤ STEP INSIDE our spacious showroom for Summer Sale Pricing &

Spectacular Showroom Specials! ✤ GRIZZLY TENT SALES offer hundreds of items at incredible prices!

✤ OUR ENTHUSIASTIC STAFFare pumped up and ready to assist

you with your purchases!

DON'T MISS ANY OF THE FUN!

Live Demos!

2014 GIANT TENT SALES2014SCRATCHED • DENTED • ONE-OF-A-KIND • AS-IS • SAMPLES

Documents

2014 Grizzly Spring Catalog Web