2014 GIVI USA General Catalog

THE ITALIAN SIGN OF MOTODESIGN

USA PRICE LIST FEBRUARy 2014

1THE ITALIAN SIGN OF MOTODESIGN

Index

COMPANY p. 2

HARD BAGS p. 6

SOFT BAGS p. 28

HELMETS p. 38

ACCESSORIES, SPOILERS& ENGINE GUARDS

p. 44

GALLERY p. 59

SPECIFIC EQUIPMENTFOR BIKES AND SCOOTERS

p. 73

Fitting kit for hard and soft bags - ScreensEngine guards - Oil carter protector - Backrests

FITTING SOLUTION ANDSPARE PARTS

p. 102

You can find the complete IMAGE GALLERY with the bike’s equipment on:www.giviusa.com - MY MOTORCYCLE

9

9

8

4

4

3

5

5

7

10

11

12

13

15

14

14

16

17

2 THE ITALIAN SIGN OF MOTODESIGN THE ITALIAN SIGN OF MOTODESIGN

COMPANY

COMPANyThe Company GIVI was conceived in 1978 by an intuition of Giuseppe Visenzi, a talented rider during the sixties in several World Championship categories, and very soon became a leading company in the sector of motorcycle accessories.The success of its products crossed the national boundaries in a very short time thanks to the passion and to the enterprising ability of its founder, who was assisted with great care and the determination by a work team that has always been able to think of and realize new products. Particularly decisive is the constant research carried out with the aim of developing materials and the use of new production technologies.The result is now a range of accessories that are not only accessories, but proper complements for motorcycles, efficient, technologically advanced and always with a new and winning design. GIVI, whose production facilities and head quarters are located in Flero, in the industrial heartland of Brescia, is now able to offer its

products in more than 50 Countries, with direct branches in France, UK, Spain, Germany, USA, Brazil, Malaysia and in Vietnam. This widespread diffusion makes possible to satisfy the needs of every motorcyclist everywhere in the world. GIVI boasts a production site that covers an area of over 30.000 sq mtrs, with a staff count of more than 100 employees, that take great care in all production phases, from the research / product planning up to its distribution, and is able to make use of the most modern technologies available, in order to obtain production responding to the market requests and characterized by a high technological content.

GIVI Head Quarter, Flero - BS GIVI do BRASIL LTDA GIVI VIETNAM GIVI ASIA - Malaysia

From the first case produced in 1979, GIVI is now able to offer a very wide range of accessories, both universal and specific, that includes hard bags and top cases, soft bags, cockpits for naked bikes, windshields for maxi scooters, a complete range of helmets for the city and touring and a series of accessories which can improve comfort and security (gps holders, sottocoppa, engine guards, backrests, hand guards, bike covers…).GIVI represents a flagship of the industry and creativity in Brescia, all its products are designed in Italy, and they are the result of passion and of an experience

gained in more than 30 years, which has made GIVI one of the most important and known Companies in the world for this sector.All GIVI accessories are planned to adapt perfectly to each kind of motorcycle thanks to the innovative and modern fitting systems. The “specific” solutions are continuously updated to offer to the motorcyclist specific fitting kits for his motorcycle.Behind every GIVI motorcycle accessory there is great planning, proven experience, high technological knowledge and accurate design study.

3THE ITALIAN SIGN OF MOTODESIGN THE ITALIAN SIGN OF MOTODESIGN

COMP

ANY

MADE IN ITALy

HEAD QUARTER

GIVI placed all manufacturing units and the main logistic warehouse within a few kilometers radius from the headquarters in Flero (Brescia). A total of more than 100 trained employees work here, setting up and monitoring the work of advanced tools and production machinery.GIVI is a strong believer in automation. It’s our highly skilled technicians who ultimately refines, assembles, polishes and checks the coupling of each and every product, granting the maximum quality.Today just a few Italian companies are structured to follow the true concept of bringing “Made in Italy” quality to the international market; GIVI is among those.

GIVI is an Italian multinational corporation, based in Brescia.The headquarters are in Flero, where a 4,000 square meters building hosts the R&D Technolab department (engineering and development, design and technical assistance) the Commercial offices (Italy and Worldwide export), the Purchasing department, the Marketing and Communication office, the IT department, the Administration office and the Directors.It also hosts the modeling office, the metal parts prototyping shop, the test labs for cases and helmets and the helmets assembly lineAt ground floor the ample and elegant showroom displays the complete GIVI range. It includes a special training and information room for dealers and visitors.

THE R&D DEPARTMENTThe need for a technical office has been a GIVI priority since the very beginning. The decision to turn it into a fully independent R&D department was finalized when the company entered the motorcycle helmet business as a manufacturer. The R&D department is the pride of GIVI: inside its offices a full team of technicians, designers and engineers follow new projects through every single stage.A second, smaller but fully equipped R&D department works on the projects aimed toward the South Asian market. This unit is located inside the manufacturing unit of GIVI Malaysia, however all the main ideas and innovations fielded mostly during the last 10 years by the brand, were born in Flero. This is a very important area composing of a light and airy, open “thinking” space, and a helmet testing lab. Another specific area of the R&D department is the modeling shop; designs and products are

carved out of solid wood, before undergoing the Reverse Engineering process. This is the process where an optical scanner registers and measures the samples, sending the data to a 3D modeling software, the stage from where the projects are then developed digitally only. The latest addition to the R&D department is a new lab where a dyno can closely simulate road conditions (with potholes, bumps, dips and so on), including some extreme situations. That is the ultimate test area for all of GIVI’s fitting and mounting kits, confirming their strength and safety.

MANUFACTURING AND PLASTIC INjECTION MOLDINGThe manufacturing and plastic injection center is also located in the city of Flero.Here the polymers, the raw material used to manufacture the hard side and top cases, are blended to GIVI’s specifications. After strict quality control they are conveyed to the automated injection press line. The unfinished products are then processed by anthropomorphic robots that complete the main assembly stages. In a nearby area the latest generation CNC mills cut the molds. In the final stage, all the molds are manually checked to assure the perfect alignment of their components. The use of extra large tanks to store the polypropylene alleviates the need for continuous refills due to the intense use of raw material.

METAL wORKSAll metal parts are manufactured in the metal works facility, also located in Flero.CNC mills cut, bend, weld and machine the metal with the highest precision.Every single piece composing our motorcycle fitting kits for side and top cases comes from this facility. The laser cutting of the metal sheets allows absolute dimensional precision, within a 0.1 mm tolerance. A row of the latest generation turn-mills provide every turned-machined part needed.


COMPANY PAINTING

QUALITy CONTROL

From an industrial standpoint, there are not many other processes that require such great effort to ensure a constant, high level of quality as painting: GIVI achieves it, by adopting the same standards as the automotive industry thanks to the use of highly automated machinery.Each and every color is carefully sampled and consequently reproduced applying primer, one or more layers of colored base, and finally the clear coat, the essential touch to assure that shiny and glossy finish to the paint surface.Finally, to preserve the integrity of the outer surface, careful assembling, adequate packaging and strict quality control are just as important.

One of our strongest assets is the pursuit of a quality standard that can greatly elevate the riding comfort and safety of motorcyclists.This is GIVI’s mission. A commitment made possible by teamwork, based on responsible product development and great respect for the end user. GIVI employs the best available technology to offer ease of use, safety and emotional involvement, turning the brand into a lifestyle. Composite techno fibers, exclusive techno polymers, complex molds, high precision machinery and injection processes, strict quality controls, products, shapes, details and ever new destinations of use testify the total dedication of the brand to the consumers’ need.No wonder GIVI received the “#1 Rating” award, certifying that the Company reached the maximum possible level of reliability on the market.

In recent years we created the new in-house department for the research and development of textile products and accessories. A designer and a specialized technician add new competencies to the know-how of the R&D Team at GIVI.The Textile Department is a perfectly integrated addition to the R&D Department of the Company and it overviews every step of the process, from the design and modeling, to the realization of working prototypes for the street tests, from the manufacturing of the first samples to the final production. Great attention is also dedicated to the new hybrid materials, from which we derived some of the new product additions to our core range of hard luggage.

TExTILE DEPARTMENT

LOGISTICS

wARRANTy AND SPARE PARTS

The logistics hub is located in Barbariga, near Brescia, covering an area of 12.500 square meters. Twenty people work here and every day they make sure the merchandise is delivered to Italian and international destinations without interruptions. To date, our warehouse stocks 5.224 items.The logistic hub handles a daily average of 1,700 boxes and 120 shipments.

All GIVI products are recognized by motorcyclists for their high level of reliability and durability.The quality of the materials and the strict control over any step of the production add to the standard 24 months warranty that cover any GIVI product and can be extended to 48 months.Customers’ satisfaction is our main goal since day one; this is why we keep a large inventory of spare and replacement parts that can be purchased separately.To make the selection of the desired part even easier, we included the exploded designs of each and every case at the end of our pricelist.


COMP

ANY

SECURITy LOCKOur automotive derived “Security Lock” represents an advanced anti-intrusion system.The lock’s main features are outstanding: hardened steel cylinder, anti-pick central cut, 3mm thick steel key and a superior number of blades placed on both sides of the cylinder.By adopting this solution, GIVI greatly increases the safety of your luggage (more than 80% improvement compared to standard locks).

The technology, derived from the nautical business, is used in the production of the whole GIVI Waterproof bags range.Thermo sealing and high frequency seams, paired with “roll-up” closing systems, are the best warranty for a fully waterproof range of textile accessories (like bags and backpacks) dedicated to an intense outdoor use.

THERMO SEALINGAND HIGH FREQUENCy SEAMS

LATEST INNOVATIONS

REMOTE CONTROLA handy remote that will save you time speeding up those routine operations “around” your top case. You don’t need to turn the engine off or use any keys. A simple push on the remote button will click the lid open.Whoever has to deal every morning with the crazy metropolitan pace, before hopping on the motorcycle and during their everyday commute (wear and take off the helmet, gloves, antitheft device and so on…) will definitely love the new GIVI Remote Control.

LED BRAKE LIGHT KITSActive safety is never to be underestimated when riding a motorcycle. This is why GIVI designed the new auxiliary red LED Brake Light Kits to be mounted on our range of Tech cases. When breaking the kit illuminates the reflectors (both red and clear) making the rider more visible to the following vehicle.Thanks to a clever spring loaded set of switches featured on both the bottom of the case and the mounting plate, the kit makes contact automatically and apart from the installation, it does not require any extra operation for everyday use.

6 THE ITALIAN SIGN OF MOTODESIGN

HARD BAGS

HARD BAGS

MONOKEy® FITTING SySTEMMONOKEY® is the historical patented fitting system by GIVI, whose main characteristic consists of the possibility to operate with only one key both the opening of the case top and the detachment of the case from the fitting plate. The extreme practicality and ease of use is only one of the characteristics that have made this fitting system one of the most utilized in the world.Thanks to this system, all the cases and plates of the MONOKEY® range combine the best characteristics of mechanical resistance and rigidity of the fitting, with features using compact and light components.The uniform distribution of the load on the plate surface is guaranteed by the three fitting points, which are placed in such a way to obtain the widest possible contact surface. The damping of oscillating and vibration and the contact between the bottom shell and the plate are assured by four spacers made of elastic material, which is particularly resistant to extreme weather and temperature variation. Thanks to these solutions a high level of reliability of the fitting is guaranteed even under the heaviest stresses and strains over the years, and able to stand the most marked stresses.

MONOKEy® SIDE FITTING SySTEMIntroduced on the market in 2006, the MONOKEY® SIDE attaches onto the side of the above-mentioned two fitting systems, and thereby introducing different fitting solutions for the motorcyclist.Projected and patented by the R&D Department of GIVI, the MONOKEY® SIDE represents an interesting evolution of the classic system constituted by the “fitment Kit plus the side-bag”.The new solution introduces new advanced technical features and some other points of interest. And the cases that adopt MONOKEY® SIDE can be recognized by the shaped profile of the bottom, which faithfully follows the shape of the inclined holder, and by two new fixing points, composed by “sleds”. The latter receive the disengagement movement from the case release button and determine a significant and further increase in overall stability.MONOKEY® SIDE allows to obtain greater adhesion of the case to the side of the motorcycle, improving the aerodynamic aspect. The motorcyclist’s habits won’t change, since he will continue to open/close and attach/detach the case equipped with MONOKEY® SIDE with one key + push button.

In order to offer a wider range of applications and uses, GIVI introduced the MONOLOCK® fitting system. Following the same philosophy that defines the MONOKEY® fitting system, this solution has been conceived for lighter vehicles, such as scooters and maxi-scooters, used mainly for short/mid range commuter transport requirements.Even with limitations of maximum load, this system of fitting combines performances comparable to those of the MONOKEY® system with components boasting lighter and far smaller dimensional restrictions.Because of its natural compatibility with the different kind of vehicles and its ease of use, it is, among other aspects, appreciated by the most important brands of motorcycle producers, who have adopted it for their original accessories. As well as for MONOKEY®, the opening of the case top shell and the detachment of the case from the plate are operated with one key only.

MONOLOCK® FITTING SySTEM

MONOKEy® CAM-SIDE FITTING SySTEMThe TREKKER OUTBACK are cases studied especially for the off-road use and for supporting all the solicitations that are subject in off road, they need fitting systems and side-case holders stronger than the MONOKEY®.For this reason it has been studied the new MONOKEY® CAM-SIDE system, that allows to fix the case in four different points maintaining the possibility to release from the rack quickly.The specific side-case holders are the PL_ _ _CAM and PLR_ _ _CAM that are realized using a steel tubular with a 18mm diameter, and are fixed to the bike in different points, in order to stiffen the structure.The panel of the frame where the case is linked, is more wide than the one used on the normal side-case holder for MONOKEY® holders, in order to move the rubber support points in the perimetric zones of the case.

7

HARD

BAG

S


TREKKER OUTBACK / TREKKER OUTBACK BLACK LINE

optional

T499B XS310 E143 E144

V35 / V35 TECHinfo

* V35N Pair of matte black side cases with matte black trim panel $ 579,00

* V35NTPair of matte black side cases with matte black trim panel - Monochromatic with smoked lenses

$ 579,00

SL102Security Lock key set for 2 cases, including bush and under lock platelets

$ 38,00

V35_ _ _ Pair of matte black side cases with painted trim panel $ 649,00

C35N Matte black trim panels (pair) $ 50,00

C35_ _ _ Pair of painted trim panel (standard colors) $ 111,00

T443 Pair of inner saddlebags for V35 cases $ 84,00

T443B Pair of inner soft bags for V35 cases $ 84,00

*Attention: this case can only be mounted with the tubular side-case hardware PLX or PLXR

optional

C35_ _ _ T443 T443B

standard colours

Mat Silver Silver Gloss Black Blue

OBK37AL Left-side Trekker Outback aluminum side-case, 37 l $ 460,00

OBK37AR Right-side Trekker Outback aluminum side-case, 37 l $ 460,00

OBK37APACK2 Pair of Trekker Outback aluminum side-cases, 37 l. $ 920,00

OBK48AL Left-side Trekker Outback aluminum side-case, 48 l. $ 475,00

OBK48AR Right-side Trekker Outback aluminum side-case, 48 l. $ 475,00

OBK48APACK2 Pair of Trekker Outback aluminum side-cases, 48 l. $ 950,00

OBK37BL Left-side Trekker Outback aluminum side-case matt black, painted,, 37 l $ 490,00

OBK37BR Right-side Trekker Outback aluminum side-case matt black, painted,, 37 l $ 490,00

OBK37BPACK2 Pair of Trekker Outback aluminum side-cases matt black, painted,, 37 l. $ 980,00

OBK48BL Left-side Trekker Outback aluminum side-case matt black, painted,, 48 l. $ 510,00

OBK48BR Right-side Trekker Outback aluminum side-case matt black, painted,, 48 l. $ 510,00

OBK48BPACK2 Pair of Trekker Outback aluminum side-cases matt black, painted,, 48 l. $ 1.020,00

T499B Inner bags for Trekker Outback 37T504 Inner bags for Trekker Outback 48E143 Additional padded handles

$ 90,00$ 105,00$ 28,00

E144 Elastic carrying net, anchorable to the hinges predisposed on the trekker outback $ 20,00

E145 Pair of reflective serigraphied stickers, to fit on the rear side. Dimensions 205 x 45 mm $ 24,00

E146 Set of 3 protective adhesive rubbers for covers. Dim. 280 x 20 mm (2 pieces) + 350 x 20 mm (1 piece) $ 14,00

SL101 Security Lock key, including bush and under lock platelets $ 19,00

V35 TECH

MAX. LOAD

22 lbVOLUME

34 ltSIZES

20.7”

15.5

”

12.4”

CAPACITY SECURITY LOCK

MAX. LOAD

22 lbVOLUME

48 ltSIZES

19.4”

15.2

”

12”

SECURITY LOCK

MAX. LOAD

22 lbVOLUME

37 ltSIZES

19.4”

15.2

”

9.6”

SECURITY LOCK

8

HARD BAGS

THE ITALIAN SIGN OF MOTODESIGN THE ITALIAN SIGN OF MOTODESIGN

TRK52N TREKKERinfo

optional

E125 E133 E142 T490

TRK33N / TRK46N TREKKERinfo

MAX. LOAD

22 lbVOLUME

46 ltSIZES

20.7”

16.2

”

12.2”


MAX. LOAD

22 lbVOLUME

33 ltSIZES

20.7”

16.2

”

9.5”

SECURITY LOCK

optional

E118 E120 E125 T484B

* TRK52N 52 litre top-case black with aluminium finish $ 409,00

E125Four rings kit for T10N elastic net anchor. The rings must be anchored to the case by making four holes of ø10mm

$ 13,00

T10N Elastic carryng net, black, 1 piece $ 18,00

E133 Polyurethane backrest (black) $ 58,00

E133SPolyurethane backrest, covered in black simulated leather with GIVI logo

$ 75,00

E142 Metal rack (black) $ 95,00

T490 Inner bags for Trekker TRK52N $ 80,00

S350

Couple of Trekker Straps belts, width 25 mm and length 1700 mm. Equipped with antislip metal safety buckle. Maximum traction load 100 kg.

$ 19,00

S351


$ 15,00

SL101 Security Lock key, includingbush and under lock platelets $ 19,00

*The top case cannot be fitted onto plates on which the contact for stop lights kit has been mounted

* TRK33N33 Liter top or side case with aluminium finish - clam shell and top opening

$ 339,00

TRK33PACK2Set of two 33 Liter top or side case packaged together - keyed alike

$ 679,00

* TRK46N46 Liter top or side case with aluminium finish - clam shell and top opening

$ 355,00

TRK46PACK2Set of two 46 Liter top or side case packaged together - keyed alike

$ 710,00

E118 Polyurethane Back Pad (black) $ 58,00

E120 Metal top case rack - does not allow for top opening $ 95,00

E120B Metal top case rack - allows for both clam shell and top opening $ 85,00


$ 13,00

T10N Elastic carryng net, black, 1 piece $ 18,00

T484B Removable inner bag for the Trekker TRK33N and TRK46N - each $ 85,00

SL101 Security Lock key, includingbush and under lock platelets $ 19,00

*The top case cannot be fitted onto plates on which the contact for stop lights kit has been mounted

MAX. LOAD

22 lbVOLUME

52 lt

SIZES

23.6”

18.1

”

12.4”


9

HARD

BAG

S


E55 MAxIA 3 / E55 MAxIA 3 TECHinfo

MAX. LOAD

22 lbVOLUME

55 ltSIZES

23.2”

12.6

”

18.9”

CAPACITY

standard colours

optional

C55_ _ _ E111 E112 T468B

E52 MAxIA / E52 MAxIA TECHinfo

MAX. LOAD

22 lbVOLUME

52 ltSIZES

23.3”

12.4

”

17.6”

CAPACITY

E52N 52 Liter top case, matte black $ 329,00

E52NT 52 ltr. topcase, black embossed with smoked reflectors

$ 329,00

E52NF 52 Liter top case, matte black w/preinstalled E97 stop light $ 359,00

E52_ _ _ s 52 Liter top case, w/ painted lid $ 405,00

E95SSpecific backrest for E52 cases - Covered in black simulated leather

$ 78,00

E96 Metal Top Case rack (black) $ 80,00E96G Metal Top Case rack (silver) $ 80,00

E97 Specific stop light for E52 cases $ 65,00

T468B Removable inner liner bag $ 49,00

standard colours

Silver Gloss Black

optional

E95S E96 E97 E98 T468B

E55N 55 Liter top case, matte black $ 365,00

E55NT 55 Liter top case, matte black - Monochromatic w/ smoked lenses $ 365,00

E55_ _ _ s 55 Liter top case w/ painted lid panel $ 440,00

E55NLUXB s55 Liter top case, matte black w/ preinstalled E112 stop light kit & E114 lid/base liner

$ 435,00

E55NLUX55 Liter top case, matte black w/ preinstalled E113S remote entry & E112 stop light kit

$ 499,00

E55NTLUX55 Liter top case, matte black w/ preinstalled E113S remote entry & E112 stop light kit - Monochromatic w/ smoked lenses

$ 499,00

C55_ _ _ Painted lid panel for any E55 series case $ 74,00

C55NL Black paintable lid panel for E55N in smooth ABS $ 34,00

E111Specific backrest for E55 cases - Covered in black and silver simulated leather

$ 80,00

E112 Specific stop light for E55 cases - Red LED $ 65,00

E113S Specific remote control entry for E55 cases $ 105,00

E114 Specific inner lid/base liner for E55 cases $ 41,00

E96 Metal Top Case rack (black) $ 80,00E96G Metal Top Case rack (silver) $ 80,00T468B Removable inner liner bag $ 49,00

E55 MAxIA TECH

E52 MAxIA TECH

10

HARD BAGS


V47 / V47 TECH / V47NN / V47NN TECH info

MAX. LOAD

22 lbVOLUME

47 ltSIZES

23.2”

12.6

”

17.7”


* V47N 47 litre top-case black with aluminium finish $ 349,00

* V47NTV47 TECH case, 47 litre, black with aluminium finish and smoked reflectors

$ 349,00

* V47NN 47 litre top-case black without aluminium finish $ 325,00

* V47NNTV47 TECH case, 47 litre, black with smoked reflectors, without aluminium finish

$ 325,00

CV47_ _ _ Cover painted (standard and specific colours) $ 69,00

E132 Specific remote control $ 105,00E134 Polyurethane backrest (black) $ 49,00

E135 Stop light with Led for top-case Monokey® V47 $ 65,00

T502 Inner bag $ 75,00


optional

V46 / V46 TECHinfo

MAX. LOAD

22 lbVOLUME

46 ltSIZES

21.8”

12.2

”

17.3”


standard colours

optional

C46N C46_ _ _ E95S E105S E106 E107 T502

E132 E134 T502

standard colours

V47 TECH

V46 TECH

V47NN

V47NNT

V46N 46 Liter top case, matte black $ 299,00

V46NT46 Liter top case, matte black - Monochromatic w/ smoked & clear lenses

$ 299,00

V46NF s46 Liter top case, matte black w/ preinstalled E105S stop light

$ 339,00

V46A900 s 46 Liter top case w/ Satin Silver lid panel $ 329,00

V46_ _ _ s 46 Liter top case w/ painted lid panel $ 349,00

C46N Matte black lid panel for V46 cases $ 31,00C46NL Matte black lid panel for V46 cases $ 27,00

C46_ _ _ Black paintable lid panel for V46N in smooth ABS $ 74,00

E95SSpecific backrest for V46 cases - Covered in black simulated leather

$ 78,00

E105S Specific stop light for V46 $ 60,00

E106 Interior light for V46 cases - Batteries not included $ 27,00

E107 Metal Top Case rack (black) $ 80,00T502 Inner bag $ 75,00


11

HARD

BAG

S


E460info

MAX. LOAD

22 lbVOLUME

46 ltSIZES

22.3”

12.3

”

16.6”

CAPACITY

E460N 46 ltr. top case, matte black $ 245,00

E79 Polyurethane backrest(black) $ 51,00

E81 Metal rack (black) $ 80,00

E92 Stop light with Led for Monokey® case E460 $ 60,00


optional

E79 E81 E92 T502

standard colours

B33 info

MAX. LOAD

22 lbVOLUME

33 lt

SIZES

17.7”

12.2

”

16.5”

CAPACITY

B33NMK 33 Liter top case, matte black $ 199,00

B33NMKLUX33 Liter top case, matte black luxury version w/ preinstalled E129 remote entry

$ 309,00

C340_ _ _ Painted lid panel (silver) $ 53,00C340_ _ _ Painted lid panel (silver matt) $ 42,00C340NL Paint ready lid panel $ 23,00

E129 Specific remote control entre for B33 cases $ 101,00



optional

C340_ _ _ E129 E130 SL101

standard colours

12

HARD BAGS


E41 KEyLESSinfo

MAX. LOAD

22 lbVOLUME

41 ltSIZES

22.6”

17”

11.4

”

CAPACITY

* E41NPair of KEYLESS 41 liter side cases, matte black w/ matt silver lids

$ 575,00

* E41NNPair of KEYLESS 41 liter side cases, matte black w/ matt black lids

$ 569,00

* E41NS

Pair of KEYLESS 41 liter side cases,, opening lids not included (matte black, opening lid in standard or specific colours sold separately)

$ 427,00

E410NN Pair of matte black lids $ 197,00E410_ _ _ Pair of painted lids $ 212,00T502 Inner bag $ 75,00* Item comes two to a box

optional

E410_ _ _ T502

standard colours

Mat Silver Silver

E360info

MAX. LOAD

22 lbVOLUME

40 ltSIZES

22.3”

16.6

”

11”

E360N 40 ltr. top or side case, matte black $ 230,00

E360G730 s 40 ltr. top or side case, gloss silver $ 307,00

E81 Metal rack (black) $ 80,00T502 Inner bag $ 75,00

optional

E81 T502

standard colours

Silver

13

HARD

BAG

S


E21 CRUISERinfo

MAX. LOAD

11 lbVOLUME

21 ltSIZES

16.7”

13

.7”

7.7”

* E21N Pair of side cases, ltr. 21 , matte black $ 199,00

* E21_ _ _ s Pair of side cases, ltr. 21, painted $ 299,00

* Item comes two to a box

standard colours

E22 info

MAX. LOAD

11 lbVOLUME

21 ltSIZES

16.7”

13

.7”

7.7”

* E22N Pair of side cases, ltr. 22 , matte black $ 249,00

E22_ _ _ Pair of Painted side case,ltr. 22 $ TBD

* Item comes two to a box

standard colours

Silver Gloss BlackB912

Pearl WhiteB913

White

14

HARD BAGS


B47 BLADE / B47 BLADE TECH / B47 BLADE wHITEinfo

MAX. LOAD

6,6 lbVOLUME

47 ltSIZES

22.4”

13.3

”

17.5”

CAPACITY

optional

E126 E132 T502

B47 BLADE TECH

standard colours

B47NML47 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 269,00

B47NMLLUX

47 ltr. MONOLOCK® top case (matte black) luxury version w/ preinstalled E132 remote entry and E126 stop light kit, universal fitting kit included

$ 399,00

B47NTML47 ltr. MONOLOCK® top case (matte black) w/ smoked lenses, universal fitting kit included

$ 269,00

B47NTMLLUX

47 ltr. MONOLOCK® top case (matte black) w/ smoked lenses and preinstalled E132 remote entry and E126 stop light kit, universal fitting kit included

$ 399,00

C47_ _ _ Cover painted (standard and specific colours) $ 85,00

E126 Specific stop light kit for B47 cases $ 84,00

E132Specific remote control entry for B47 BLADE, B37 BLADE and V47 cases

$ 105,00


E131SPolyurethane backrest, covered in black simulated leather with GIVI logo

$ 75,00



B37 BLADE / B37 BLADE TECH info

MAX. LOAD

6,6 lbVOLUME

37 lt

SIZES

19.5”

12.5

”

16.9”

CAPACITY

B37N37 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 199,00

B37NLUX


$ 349,00

B37NT37 ltr. MONOLOCK® top case (matte black) w/ smoked lenses, universal fitting kit included

$ 199,00

B37NTLUX


$ 349,00

C37_ _ _ Cover painted (standard and specific colours) $ 79,00

E132Specific remote control entry for B47 BLADE, B37 BLADE and V47 cases

$ 105,00


E126 Specific stop light kit for B47 cases $ 84,00

SL101 Security Lock key, including bush and under lock platelets $ 19,00optional

E132 E126 SL101

standard colours

B37 BLADE TECH

15

HARD

BAG

S


E470 SIMPLy III / E470 SIMPLy III TECHinfo

MAX. LOAD

6,6 lbVOLUME

47 ltSIZES

21.8”

12.7

”

16.7”

CAPACITY

E470N 47 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 235,00

E470_ _ _ s47 ltr. MONOLOCK® top case (painted), universal fitting kit included

$ 290,00

E470NT47 ltr. MONOLOCK® top case (matte black) w/ smoked lenses, universal fitting kit included

$ 235,00

C470_ _ _ Painted lid panel (standard colors) $ 80,00

E94 Specific stop light kit for E470/E450 cases $ 54,00

E110 Back-pad $ 64,00T502 Inner bag $ 75,00


optional

C470_ _ _ E94 E110 T502

standard colours

Silver Gloss Black Blue Metallic Red

E450 SIMPLy IIinfo

MAX. LOAD

6,6 lbVOLUME

45 ltSIZES

22”

12.7

”

16.7”

CAPACITY

E450N45 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 195,00


$ 269,00

E84 Polyurethane backrest (black) $ 43,00E94 Stop light with Led $ 54,00T502 Inner bag $ 75,00


optional

E84 E94 T502

standard colours

Silver Gloss Black

E470 SIMPLy III TECH

16

HARD BAGS


E370 / E370 TECHinfo

MAX. LOAD

6,6 lbVOLUME

39 ltSIZES

18.8”

12.7

”

16.3”

CAPACITY


$ 179,00


$ 179,00


$ 225,00

C370_ _ _ Painted lid panel (standard colors) $ 69,00

E108 Stop light kit $ 64,00E109 Back-pad $ 64,00


optional

C370_ _ _ E108 E109 SL101

standard colours

Silver Gloss Black Blue Red Metallic Red

E370 TECH

E340 VISION / E340 VISION TECHinfo

MAX. LOAD

6,6 lbVOLUME

34 ltSIZES

19.1”

12”

16.3”

CAPACITY

E340N34 ltr. MONOLOCK® top case (matte black) universal fitting kit included

$ 159,00


$ 159,00

E340A900 34 ltr. MONOLOCK® top case (matte silver lid panel) universal fitting kit included

$ 175,00

E340G730 s34 ltr. MONOLOCK® top case (gloss silver lid panel) universal fitting kit included

$ 194,00

C340_ _ _ Painted lid panel (silver matt) $ 42,00C340_ _ _ Painted lid panel (silver) $ 53,00C340NL Paint ready lid panel $ 23,00E811 Polyurethane backrest (black) $ 54,00

optional

C340_ _ _ E811

standard colours

Mat Silver Silver Blue Gloss Black

E340 VISION TECH

17

HARD

BAG

S


E300N / E300NT / E300Binfo

MAX. LOAD

6,6 lbVOLUME

30 ltSIZES

16.1”

11.8

”

15.7”

CAPACITY


$ 120,00


$ 170,00


$ 120,00

E300B30 ltr. MONOLOCK® top case (molded white lid), universal fitting kit included

$ 120,00

C340_ _ _ Painted lid panel (silver matt) $ 42,00C340_ _ _ Painted lid panel (silver) $ 53,00C340NL Paint ready lid panel $ 23,00E103 Back-pad $ 54,00

optional

C340_ _ _ E103

standard colours

Silver Mat Silver Blue

E300B

E300NT

B33 info

MAX. LOAD

6,6 lbVOLUME

33 lt

SIZES

17.7”

12.2

”

16.5”

CAPACITY

B33NML33 Liter MONOLOCK® top case (matte black), universal fitting kit included

$ 169,00

B33NMLLUX

33 Liter MONOLOCK® top case (matte black), luxury version w/ preinstalled E129 remote entry, universal fitting kit included

$ 269,00

C340_ _ _ Painted lid panel (standard colours) $ 53,00

C340_ _ _ Painted lid panel (specific colours) $ 42,00

C340NL Paint ready lid panel $ 23,00

E129 Specific remote control entry for B33 cases $ 101,00


optional

C340_ _ _ E129 E130

standard colours

18

HARD BAGS


E30RNMALDinfo

MAX. LOAD

6,6 lbVOLUME

30 ltSIZES

15.7”

11.8

”

16”

CAPACITY

E30RNMALD30 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 100,00

E103 Polyurethane backrest (black) $ 54,00E104 Stop light with Led $ 56,00

optional

E103 E104

standard colours

E260 MICRO IIinfo

MAX. LOAD

6,6 lbVOLUME

26 ltSIZES

15.2”

12.1

”

15.3”

CAPACITY

E260N s26 ltr. MONOLOCK® top case (matte black), universal fitting kit included

$ 135,00

E260G730s

26 ltr. MONOLOCK® top case (painted), universal fitting kit included

$ 227,00

E99 Stop light with Led $ 55,00E102 Polyurethane backrest (black) $ 54,00

optional

E99 E102

standard colours

Silver


CARRIERSGIVI has developed the most comprehensive range of specific fitting Kits available on the market. A choice of accessories able to satisfy the different travel needs of keen motorcyclists in a professional way. For the mounting of a top case we offer plates, Special Racks and Monoracks, for the mounting of two side cases are available PL, PLA/PLB holders and Wingrack chassis with the possibility of mounting also the top case.

The Wingrack chassis is available also in the universal version (to be combined with specific fitting Kits) thus obtaining the maximum loading capacity on every motorcycle. The constant GIVI research and development offer the perfect adaptable mounting solutions for multiple makes and model of motorcycles, this is one of the main reason motorcyclists everywhere in the world choose GIVI.

CARR

IERS


In order to fix a case or top-case on your motorcycle/scooter, GIVI offers lots of possibilities depending on the model of motorcycle you own. Herewith following you will find all the fitting possibilities; you can look at the table “Guide to the availability for motorcycle models” on page 73 to see which is the best solution in your case.

M3M35

M7

+

+

_ _ _ F_ _ _ FL

_ _ _ FZ

=

=

MONOKEY®:SR _ _ _ - with the plate you find in the box or with E251 plate

...................+...................

...................+...................

.............+...............

MONORACK - FZ

SPECIAL RACK - SR

With FZ: + M5 or M7 plate for the mounting of Monokey® top-case / + M5M or M6M plate for the mounting of the Monolock® top-case

Check the note alongside the specific code (from page 95 to 142)

Check the note alongside the specific code (from page 73 to 94)

With F: + M3 for the mounting of Monokey® top-case / + MM plate for the mounting of Monolock® top-caseWith FL: + M35 for the mounting of Monokey® top-case

MONOLOCK®:SR _ _ _ with the Monolock® plate you find in the boxSR _ _ _ M with the plate you find in the box

......+......

......+......

MONORACK - F/FL

CARRIERS


PL _ _ _ / PLR _ _ _

SPECIFIC TUBULAR SIDE CASE HOLDER - PLSPECIFIC TUBULAR SIDE CASE HOLDER QUICK REALEASE - PLRFor MONOKEY® cases

SPECIFIC PLATE - E

MONOKEY:E _ _ _ with the plate you find in the box

SRA _ _ _

SPECIAL RACK IN ALUMINIUM - SRAFor MONOKEY® Case

MONOLOCK:E _ _ _ with the Monolock® plate you find in the boxE _ _ _ M with the plate you find in the box

......+......

......+......Check the note alongside the specific code (from page 73 to 94)

It does not allow the assembly of the stop light kit or the remote control device on the case

CARR

IERS


Wingrack N140 / N141

+

Y _ _ _

=

N141

.......+.......

wINGRACK IN ALUMINIUM - N140 / N141For 3 MONOKEY® cases

N140

PLX _ _ _ / PLXR _ _ _

PL _ _ _ CAM

SPECIFIC TUBULAR SIDE CASE HOLDER - PLxSPECIFIC TUBULAR SIDE CASE HOLDER QUICK REALEASE - PLxRFor MONOKEY® SIDE cases - V35

SPECIFIC TUBULAR SIDE CASE HOLDER - PL_ _ _CAM (0.7 INCHES DIAMETER)For MONOKEY® CAM-SIDE cases - TREKKER OUTBACK

Wingrack N150 / N151

+

Y _ _ _

=

.........+..........

N150

N151

wINGRACK IN ALUMINIUM - N150 / N151For 2 MONOKEY® Side cases

CARRIERS


M3 / MM

+

1000F..................+..................

UNIVERSAL PLATE - E251For MONOKEY® cases

If there has not been a specific solution for the mounting of GIVI cases and top-cases for your motorcycle, you can also check the possibility of using one of the following universal fitting systems:

N140

+

Y127..................+..................

UNIVERSAL PLATE IN MONOLOCK® TOP-CASES BOxFor MONOLOCK® cases

UNIVERSAL MONORACK - 1000F

For the specific motorcycle items prices (_ _ _F / _ _ _FL / _ _ _FZ / SR_ _ _ / SR_ _ _M / PL_ _ _ / PLR_ _ _ / PLX_ _ _ / PLXR_ _ _ / E_ _ _ / E_ _ _) consult the “Guide to availability for motorcycle models” from page 73.

M3 + 1000F for the mounting of Monokey® top-case / + MM plate for the mounting of Monolock® top-case

UNIVERSAL FITTING KIT FOR wINGRACK - y127 For 3 MONOKEY® cases

CARR

IERS


soft bags

DimensioniDimensionsAbmessungenDimensionsDimensiónes

VolumeCapacityKapazitätVolumeVolumen

PortacartinaMap holderKartenfachPortecartePorta mapas

TracollaShoulder strapTragegurtBandoulièreBandolera

Cinghie elasticheElastic strapsElastikgurtSangles élastiquesCorreas elásticas

DETACHABLE ACCESSORIES Parti staccabiliDetachable accessoriesAbnehmbare TeileParties détachablesPartes Divisibles

Monokey® / Monolock®





TECHNOLOGY Cinghie a velcroUniversal adjustablevelcro strapsKlettbänderSangles velcroCorreas de velcro

ScomponibileModularTeilbarModulableModulabile

EstensibiliExpandableErweiterbarExtensibleExtensible

Base rinforzataresistente al caloreHeat resistant baseHitzebeständiges UnterteilFond résistant à la chaleurFondo reforzadoresistente al calor

Trasformabile in zainettoIt can be trasformedinto a rucksackIn einen RucksackumwandelbarTransformable en sac a dosTransformable en mochila

Busta impermeabileantipioggiaRaincoverRegenhaubeHousse imperméableBolsa impermeable

Cinghia di sicurezzaAdditional fastening beltSicherheitsgurtSangle de sécuritéCorrea de seguridad

WHIT PLATE Con piastraWith plateMit PlatteAvec platineCon parrilla

INNER POCKET Scomparti interniInner pocketInterne FächerCompartiments intérieursCompartimento interno

STRAP EMERGENCY Cinghia di sicurezzaAdditional fastening beltSicherheitsgurtSangle de sécuritéCorrea de seguridad

Impugnatura ergonomicaErgonomic gripErgonomischer HandgriffPoignée ergonomiqueAsa ergonómica

ERGONOMIC GRIP

PC POCKET Tasca per pcPc pocketFach für LaptopPoche pour pcCompartimento para PC

WATERPROOF ZIP Cerniere impermeabiliWaterproof zipWasserdichteReißverschlüsseFermetures zipimperméablesCremallera termosellada

Parti rinforzateReinforced partsVerstärkte TeileParties renforcéesPartes reforzadas

REINFORCED PARTS

HELMET BAG Porta cascoHelmet bagHelmtaschePorte casquePorta-casco

Bande riflettentiReflective partsReflektierende BänderBandes reflectivesBandas reflectantes

Predisposto per lucchettodi sicurezzaSet to safety lockAntidiebstahl vorgesehen Predisposée pour lecadenas de sécuritéPreparada para colocarcandado de seguridad

Porta GPS integratoGPS holder integratedGPS Halterung integriertSupport pour GPS intégréPorta GPS integrado

Sacca internaantiacqua asportabileEasy-carry dry pak insideInnentasche wasserdicht abnehmbarSac interne étancheamovibleBolsa interior extraíble impermeable

Easylock SystemEasylock SystemEasylock SystemEasylock SystemEasylock System

Tanklock SystemTanklock SystemTanklock SystemTanklock SystemTanklock System

UNIVERSAL Borsa serbatoio universaleUniversal tank bagUniversal tanktascheSacoche de reservoir universelleBolsa depósito universal

SOFT BAGS

ICONS

Besides hard luggage, GIVI also produces a wide range of soft luggage.Like these practical tank bags made of polyester and textile (available in different sizes), the saddle bags, the tail bags, the rucksacks, etc.Several small but extremely significant details underline the great attention to detail that GIVI gives to these items: for instance the transparent pocket with compartment carrying a navigator, that enables the use of a map while

riding, or the base of the bag made of a scratch and slip resistant material, that protects the integrity of your tanks paintwork or of the new rapid lock/unlock Tanklock system.And last but not least the rain cover provided, that protects your luggage in case of sudden bad weather, the belts to guarantee a more secure fitting and the shoulder straps which transform the bags into a rucksack to make easier transportation when off the bike.


The materials (600D Polyester TPE and 420D Honeycomb) and the technical solutions orientated to maximum efficiency gives to this range of bags a solid reliability suitable to all users of bikes.

Sporty look from the express line for those who are not willing to compromise in terms of reliability and comfort. This series of high range products are manufactured in Cordura® EVA laminated with innovative technical solutions.

Particularly suited to match the range of the TREKKER cases for their technical and essential design, these bags are heat sealed, non-toxic and ecological (TPU), PVC-free and offer the full guarantee of impermeability. Resistant to temperatures +70° -45°.

The products of this extensive line are characterised by the use of resistant materials such as 1680D Polyester and Lorica, and reinforced construction of the pads, linings and plastic inserts. The range also incorporates some models of bags that complement the innovative Tanklock fitting system.

Equipped with a rigid structure, the bags of this range provide a stable load similar to the traditional hard cases. The thermoforming allows the full capacity of the load and the lightness as well as an aerodynamic and sporty design. Tanklock and Easylock systems patented by GIVI adds further practicality of use, making the fitting/release system fast and secure.

Range of modular bags of various shapes and capacity. Equipped with universal fitting kits suitable to any use. Each model includes rain covers and shoulder belts. High resistance Guzi nylon 1200D, inserts in faux leather and buckles in brushed metal alloy give a classic retro style to this range, that is ideal for the Custom segments (sporter and Cruiser) and Modern-Classic.

SILVER RANGE

3D RANGE

CLASSICS RANGE

xSTREAM RANGE

wATERPROOF RANGE

EASy RANGE

soft

bag

s

26

SOFT BAGSSOFT BAGS


EASy RANGE

T481 s Tank purse with magnets $ 83,00 EA102 Universal expandable tank bag $ 105,00 EA103

Modular tank bag, convertible into rucksack and shoulder-bag, universal

$ 169,00

SIZES

12.2”

6.3”5

.1”

VOLUME

6 lt

UNIVERSAL SHOULDER STRAP RAIN COVER

INNER POCKET

SIZES

11”

6.7”>1

0.6”

14.5”

MAX VOLUME

25 ltUNIVERSAL EXPANDABLE TRANSFORMABLE

MAP HOLDER RAIN COVER FASTENING BELT REINFORCED PARTS

SIZES

11.4”

12”>

15.7

”

14.5”

MAX VOLUME

25 +15 lt

MAP HOLDER UNIVERSAL MODULAR

REINFORCED PARTS EXPANDABLE RAIN COVER SHOULDER STRAP

EA106 Small-size universal tank-bag (with magnets) $ 59,00 EA100 Pair of large expandable

saddle bags $ 158,00 EA101 Pair of small expandable saddle bags $ 143,00

SIZES

12.2”

5.1”

6.3”

MAX VOLUME

6 ltUNIVERSAL SHOULDER STRAP

RAIN COVER INNER POCKET

SIZES

20.8”

12.5

”

7”>11”

MAX VOLUME

40 ltEXPANDABLE SHOULDER STRAP HEAT RESISTANT

VELCRO ELASTIC STRAPS RAIN COVER

SIZES

18.5”

11.4

”

7”>11”

MAX VOLUME

30 ltEXPANDABLE SHOULDER STRAP HEAT RESISTANT

VELCRO ELASTIC STRAPS RAIN COVER

EA104 Expandable helmet holder rucksack $ 73,00 EA105 Tunnel bag for scooter,

with side pockets $ 105,00 EA107 Seat roll-bag $ 110,00

SIZES

16.5”

16.9

”

5.5”>9.5”

MAX VOLUME

22 ltEXPANDABLE STRAP EMERGENCY HELMET BAG

RAIN COVER

SIZES

9.8”

12.5

”

11.8”

MAX VOLUME

15 ltSHOULDER STRAP FASTENING BELT REINFORCED PARTS

RAIN COVER

SIZES

18.5”

11.8

”

11.8”

MAX VOLUME

35 ltRAIN COVER SHOULDER STRAP

REINFORCED PARTS

27

SOFT

BAG

SSO

FT B

AGS


EA108 Waist-bag $ 25,00 EA109 Leg wallet $ 25,00 EA110 Tank bag with specific base for Enduro bikes - 25 lt $ 139,00

SIZES

9.8”

4.3”

5.5”

INNER POCKET STRAP EMERGENCY

SIZES

4.3”

6.6”

2.9”

INNER POCKET FASTENING BELT

SIZES

9,8”

7,9”

>12,

2”

11,8”

VOLUME

25 lt

UNIVERSAL RAIN COVER SHOULDER STRAP

MAP HOLDER REMOVABLETABLET HOLDER

REINFORCED PARTS EXPANDABLE

NEw

SILVER RANGE

SV203 Small tank bag convertible into a rucksack, universal (with magnets) $ 99,00 SV205 Tank bag for enduro motorbikes

with a specific frame $ 164,00 SV204 Large tank bag convertible into a rucksack, universal (with magnets) $ 149,00

SIZES

13.8”

9.4”

6.3

”>9

.8”

MAX VOLUME

20 ltMAP HOLDER WATERPROOF ZIP EXPANDABLE

UNIVERSAL RAIN COVER

SIZES

9.8”

7.8

”>1

2.2

”

11.8

”

MAX VOLUME

25 ltEXPANDABLE RAIN COVER SHOULDER STRAP

MAP HOLDER WATERPROOF ZIP FASTENING BELT

SIZES

13.8”

11.4

”

13

”>1

6.5

”

MAX VOLUME

25 +20 lt

MAP HOLDER WATERPROOF ZIP MODULAR

UNIVERSAL RAIN COVER

EA111 Light and compact rucksack with water pouch included $ 75,00 EA112 Tablet holder with removable

magnets for the tank $ 69,00

SIZES

11”

1,9”

17,9”

VOLUME

2 lt

STRAP EMERGENCY INNER POCKET

SIZES

11,2”

1,2”

14,1”

UNIVERSAL MAP HOLDER 4 MAGNETS RAIN COVER

FASTENING BELT

NEw NEw

28

SOFT BAGSSOFT BAGS


SV200 Big lateral bags $ 159,00 SV201 Little lateral bags $ 139,00 SV202 Tunnel/seat bag for scooters $ 85,00

SIZES

19.7”

11”

7.9

”>11

.4”

MAX VOLUME

40 ltSHOULDER STRAP WATERPROOF ZIP VELCRO

EXPANDABLE RAIN COVER REINFORCED PARTS

SIZES

17.7”

11”

6.3

”>1

0.2

”MAX VOLUME

30 ltSHOULDER STRAP WATERPROOF ZIP VELCRO

EXPANDABLE RAIN COVER REINFORCED PARTS

SIZES

11.8”

10.6”

8.6

”

MAX VOLUME

20 ltSHOULDER STRAP WATERPROOF ZIP INNER POCKET

PC POCKET RAIN COVER STRAP EMERGENCY

xstream range

XS300 Tank bag, universal (with magnets) $ 127,00 XS301 Seat bag $ 154,00 XS302 Little lateral bags $ 207,00

SIZES

7.8”

7>9”

12.2”

MAX VOLUME

12 ltRAIN COVER WATERPROOF ZIP INNER POCKET

UNIVERSAL ERGONOMIC GRIP REINFORCED PARTS TRANSFORMABLE EXPANDABLE

SIZES

10.2”

8.6

”

13.7”

MAX VOLUME

20 ltELASTIC STRAPS WATERPROOF ZIP

SHOULDER STRAP RAIN COVER ERGONOMIC GRIP REINFORCED PARTS

SIZES

17.7”

10.6”

8.7”

>11.

4”

MAX VOLUME

25 ltEXPANDABLE WATERPROOF ZIP FASTENING BELT

SHOULDER STRAP RAIN COVER REINFORCED PARTS

XS303 Rucksack helmet holder $ 159,00 XS304 Big tank bag $ 199,00 XS305 60 litre Seat bag – Xstream Range $ 259,00

SIZES

10.6”

15.7

”

9”>11

.8”

MAX VOLUME

30 ltEXPANDABLE HELMET BAG INNER POCKET

WATERPROOF ZIP RAIN COVER ERGONOMIC GRIP STRAP EMERGENCY

SIZES

14.6”

10.2”

7.9

”>11

.4”

MAX VOLUME

25 ltMAP HOLDER WATERPROOF ZIP REMOVABLE MAGNETS

TFS RAIN COVER EXPANDABLE REINFORCED PARTS

SIZES

27.1”

8.2”

15.3”

MAX VOLUME

60 ltRAIN COVER WATERPROOF ZIP ELASTIC STRAPS

REINFORCED PARTS EXPANDABLE INNER POCKET

29

SOFT

BAG

SSO

FT B

AGS


XS306 TANKLOCK expandable tank bag $ 185,00 XS307 TANKLOCK expandable

tank bag $ 169,00 XS308 TANKLOCK Enduro tank bag $ 189,00

SIZES

9.8”

9”>1

1”

13”

MAX VOLUME

25 ltTANKLOCK

SYSTEMRAIN COVER SHOULDER STRAP

MAP HOLDER EXPANDABLE REINFORCED PARTS WATERPROOF ZIP

SIZES

10.6”

7”>8

.2”

13.7”

MAX VOLUME

15 ltTANKLOCK



SIZES

11”

7.8”

>9”

13.7”

MAX VOLUME

20 ltTANKLOCK



XS309 Waist-bag with removable smartphone holder – Xstream Range $ 69,00 XS311 Expandable tank bag with

removable magnets - 25 liter $ 185,00 XS312 Expandable tank bag with removable magnets - 15 liter $ 165,00

SIZES

9”

6.2”

3.1”

SMARTPHONEPOCKET

5”STRAP EMERGENCY WATERPROOF ZIP INNER POCKET

SIZES

9,8”

9”>1

1”

13”

VOLUME

25 lt

UNIVERSAL 4 MAGNETS

SHOULDER STRAP MAP HOLDER EXPANDABLE REMOVABLETABLET HOLDER

SIZES

10,6”

7”>8

,2”

13,7”

VOLUME

15 lt

UNIVERSAL 4 MAGNETS

SHOULDER STRAP MAP HOLDER EXPANDABLE REMOVABLETABLET HOLDER

NEw NEw

XS313 Expandable tail bag suitable for sporty motorcycles – 20 liter $ 105,00 XS314 Pair of expandable

panniers - 25 liter $ 249,00 XS315 Tool case pockets designed specific to the new BMW R1200GS (13) $ 89,00

SIZES

11,8”

8,2”

>10,

2”

11”

VOLUME

20 lt

RAIN COVER SHOULDER STRAP

EXPANDABLE INNER POCKET

RAIN COVER SHOULDER STRAP EXPANDABLE

REINFORCED PARTS HEAT RESISTANT

SIZES

7”

7,8”

1,7”

SIZES

3,5”

9”

2,3”

NEw NEw NEw

30

SOFT BAGSSOFT BAGS


XS316 Universal tail bag suitable for Touring bikes - 35 liter $ 179,00 XS317 Multi-task cargo rucksack with

location for notebook - 30 liter $ 175,00 XS318 Tunnel/Seat bag - 25 liter $ 139,00

SIZES

16,9”

13,3

”

13,3”

VOLUME

35 ltCAPACITY SHOULDER STRAP

UNIVERSAL INNER POCKET RAIN COVER

SIZES

12,2”

9,8”

18,5”

MAX VOLUME

30 ltPC POCKET

15”

HELMET BAG INNER POCKET

RAIN COVER ERGONOMIC GRIP STRAP EMERGENCY

SIZES

12,6”

11,4

”

10,6”

VOLUME

25 lt

RAIN COVER ERGONOMIC GRIP

STRAP EMERGENCY SHOULDER STRAP

NEw NEw NEw

3D RANGE

3D600 Thermoformed saddle bag EASYLOCK $ 349,00 3D603 Thermoformed

TANKLOCK tank bag $ 117,00 3D604 Thermoformed TANKLOCK tank bag $ 149,00

SIZES

8.6”

11.4

”

17.7”

VOLUME

15 lt

EASYLOCKSYSTEM

INNER POCKET

ERGONOMIC GRIP WATERPROOF ZIP RAIN COVER

SIZES

9,4”

7”

10,6”

MAX VOLUME

4 ltTANKLOCK

SYSTEMINNER POCKET RAIN COVER

SIZES

9,8”

9,4”>

11,8”

13,4”

VOLUME

15 lt

TANKLOCKSYSTEM

INNER POCKET RAIN COVER

REMOVABLETABLET HOLDER

ERGONOMIC GRIP

NEw NEw

wATERPROOF RANGE

WP400 Waterproof bag for seat, carrier 40 lt. $ 105,00 WP401 Waterproof bag, 80 lts $ 158,00 WP402 Waterproof cylinder for the

seat, carrier 30 lt. $ 73,00

SIZES

23.6”

13

.3”

12.6”

MAX VOLUME

40 ltWATERPROOF ELASTIC STRAPS

ERGONOMIC GRIP SHOULDER STRAP

SIZES

9.4”

23.6

”

9.4”

MAX VOLUME


SHOULDER STRAP ERGONOMIC GRIP

MAX VOLUME

30 ltSIZES

22.8”

13.7

”

13.7”

WATERPROOF ELASTIC STRAPS

ERGONOMIC GRIP SHOULDER STRAP

31

SOFT

BAG

SSO

FT B

AGS


WP403 Waterproof rucksack 35 lts $ 116,00 WP404 Waterproof leg bag $ 42,00 WP405 Pair of Waterproof side bags 25 lt., high visibility $ 199,00

SIZES

9.4”

23.6

”

9.4”

MAX VOLUME


SHOULDER STRAP

SIZES

4.7”

6.3”

3.1”

WATERPROOF FASTENING BELT

SIZES

18,1”

10,6

”

8,2”

MAX VOLUME

25 ltVELCRO REINFORCED PARTS

WATERPROOF

NEw

WP406 High visibility Waterproof tankbag / seat bag, 20 lt. $ 99,00 WP407 High visibility Waterproof

cylinder for the seat, 30 lt. $ 75,00

SIZES

10,2”

15,7

”

7,9”

MAX VOLUME

20 ltSHOULDER STRAP ELASTIC STRAPS

WATERPROOF

SIZES

13,7”

22,8

”

13,7”

MAX VOLUME

30 ltSHOULDER STRAP ELASTIC STRAPS

WATERPROOF

NEw NEw

CLASSICS

CL500 Saddle bag / rack $ 317,00 CL501 Saddle roller bag / rack $ 105,00 CL502 Saddle bag / rack $ 211,00

SIZES

17.7”

18.5

”

9.8”

MAX VOLUME

45 ltVELCRO TRANSFORMABLE MODULAR

REINFORCED PARTS FASTENING BELT RAIN COVER

SIZES

14.5”

7.8”

8.6”

MAX VOLUME

13 ltVELCRO SHOULDER STRAP MODULAR


SIZES

16.9”

11.8

”

11.4”

MAX VOLUME

25 ltVELCRO SHOULDER STRAP MODULAR


32

SOFT BAGSSOFT BAGS


CL503 Pair of lateral bags, usable as a pair or singly $ 370,00

SIZES

16.5”

11.8

”

7.5”

MAX VOLUME

18 ltVELCRO REINFORCED PARTS FASTENING BELT

RAIN COVER

VARIOUS

T466 s Shoulder bag $ 94,00 T445 Soft bag for ATV $ 212,00 T465 s Shoulder strap computer bag $ 105,00

SIZES

11.8”

2.8”

15”

MAX VOLUME

8 ltSHOULDER STRAP STRAP EMERGENCY WATERPROOF ZIP

SIZES

35.4”

9.5”>

18.5”

11.8

>14.2

”

MAX VOLUME

103 ltSIDE BAGS VOLUME

25 ltMODULAR EXPANDABLE

RAIN COVER

SIZES

18.1”

3.1”

12.6

”

MAX VOLUME

12 ltFASTENING BELT STRAP EMERGENCY WATERPROOF ZIP

T446 s Phone holder $ 19,00 T447 s Pocket money $ 27,00 T448 Holder for T446 and 447 $ 32,00

SIZES

2.2”

1.6”

4.7

”

RAIN COVER

SIZES

3.9”

2.4”

5.5

”

RAIN COVER

33

SOFT

BAG

SSO

FT B

AGS


T484B Inner and extendable bag for Trekker Cases TRK33N and TRK46N $ 85,00 T490 Inner bags for Trekker

TRK52N $ 80,00 T499B Inner bags for Trekker Outback 37 $ 90,00

SIZES

18.1”6.6

”>9.8

”

12.2

”

VOLUME

2435 lt

SHOULDER STRAP EXPANDABLE SIZES

19.6”10.6”13

.7”

VOLUME

2435 lt

SHOULDER STRAP SIZES

16.9”

13.9

”

6.6”

VOLUME

2435 lt

SHOULDER STRAP

T502Inner bag for V47, V46, E41 Keyless, E460, E360, E45, B47 Blade, E470 Simply III, E450 Simply II cases

$ 75,00 T504 Inner bags for Trekker Outback 48 $ 105,00

SIZES

18,1”

12,2

”

9,8”

INNER POCKETTABLET HOLDER

13.4”

SHOULDER STRAP SIZES

16,9”

13,9

”

9,4”

SHOULDER STRAP

NEw NEw

T443 s Pair of inner saddlebags for V35 cases $ 84,00 T443B Pair of inner soft bags for

V35 cases $ 84,00 T468B Inner bag for E55 Maxia 3 and E52 Maxia cases $ 49,00

SIZES

17.3”

10.6”

11.4

”

VOLUME

34 ltSHOULDER STRAP SIZES

17.3”

10.6”

11.4

”

VOLUME

34 ltSHOULDER STRAP SIZES

10.2”

14.2”

8.3

”

VOLUME

33 ltSHOULDER STRAP

SOFT AND HARD BAG’S COMPLEMENTS

T471S Waterproof internal universal bag (capacity 20 Lt) $ 27,00 T471L Waterproof internal universal

bag (capacity 32 Lt) $ 30,00 T473 Rain cover for lateral GIVI bags $ 69,00


SOFT bAGS

FITTING SOLUTIONS FOR SOFT BAGSSADDLE BAGS

SADDLE BAGS

EASyLOCK BAGS - Easylock System

T_ _ _

TE_ _ _

TUBULAR HOLDER

In order to fix the universal side soft bags in a safe and secure way, GIVI studied and realized some stabilizing holders for different model of motorcycles. The mounting of these side holders allows you to attach the bags in such a way as to avoid damage due to the proximity of the exhaust pipe to the soft bags.

For specific items’ prices for motorcycle model (T_ _ _ and TE_ _ _) see the “Guide to availability for motorcycle models”on page 73.

In the case there is no specific tubular holder for your model of motorcycle, on which you can mount the couple of Soft Bags you choose, we suggest you to try to set the Bag you want directly on your motorcycle, in order to check that these Bags do not get in touch with the exhaust pipe, do not get in touch with the back wheel and do not interfere with some other parts of the vehicle.

TUBULAR HOLDER FOREASYLOCK BAGS(it can be used also as holder forsoft luggage)

Insert the key into the lock and turn it, put the bag in the TE specific frame so that the two fins located at the base part of the attachment system encompassing the bottom of the frame; now you only have to push the bag onto the frame for fitting it.Then rotate the key in the vertical position to remove it.For specific items’ prices for motorcycle model (TE_ _ _) see the “Guide to availability for motorcycle models” on page 73.


SOFT

bAG

S

TANK BAGS

BELTS INCLUDED - All the bags are supplied with 4 belts

wITH MAGNETS

MAGNETS

- Bind the belts included to the frame of the motorcycle- Fix the other end of the belts to the D-ring rings on the base of the bag

ATTENTION: For the next season some tank bags (except the Tanklock) will be sold also WITHOUT MAGNETS.Therefore all the tank bags will become UNIVERSAL, since they will be able to be mounted on every type of motorcycle (both with metallic and a non-metallic tank). Follow the 3 different possibilities of mounting:

The TFS System has been studied to simplify the fixing of the bags to the plastic tanks that, unlike the metal ones, they cannot use the magnetic fitting system. It is based on a laminated EVA polyester foil covered with anti-slip PVC which, once it is fixed to the bike by using the 4 adjustable belts, is the base to fasten and unfasten the bag to the bike quickly.The TSF measurements (see the next table) means it is usable for most makes of bikes and the system allows the fastening of all tank bags in our range, with the exclusion the Tanklock bags.

- Fix the TFS (Tank Fitting System) on the frame of the motorcycle, through the 4 adjustable belts- Fix the bag on the TFS base through the belts included

T460B $ 59,00price

T460B

TFS (TANK FITTING SySTEM) - Universal base for tank bags


SOFT bAGS

BF_ _ $ 17.00

BF09 $ 34.00

BF15 $ 65.00

BF16 $ 65.00

price

BF_ _ Mount the specific kit to the fuel tank cap and fit the bag positioning on the flange using slight amount of pressure. To release it you simply pull the red lever positioned at the base. The flanges coupled to the system vary in the base of the cap, therefore you must check the list of compatibility.

TANKLOCK TANK BAGS - Tanklock System

TANK BAG FOR ENDURO BIKEST483 - Tank bag for Enduro bikes with specific base included

Tank bag for enduro bikes with specific base included:

- BMW R1200GS (04 > 12)- Honda Transalp 700 (08 > 11)- Suzuki DL 650/1000 V-Strom (02 > 12) - Suzuki DL 650 V-Strom L2 (11 > 12) - Kawasaki Versys 650 (10 > 13)- Triumph Tiger 800 / Tiger 800 XC (11 > 13) - Yamaha XTZ 1200 (11 > 13)

Offers the possibility to fix onto other motorcycles by checking the compatibility of the base on your tank, or by using the straps provided.


SOFT

bAG

S

COMPATIBILITy FLANGE

MODEL - CC. - YEAR FLANGE NOTE

APRILIA

RS 125 BF02

Shiver 750 / Shiver GT 750 (07 > 10) BF02

Shiver 750 (11 > 13) BF02

ETV 1000 Caponord (01 > 10) BF02

BENELLI

Cafè Racer 899 (10) BF02

Cafè Racer 1130 (10) BF02

Titanium (10) BF02

Tornado Naked Tre 899 (10) BF02

Tornado Naked Tre 899S (10) BF02

Tornado Naked Tre R160 (10) BF02

Tre 899 K / Tre 1130 K (06 > 11) BF02

BMW

R 1200 GS (08) BF07

R 1200 GS (09 > 11) BF06

R 1200 R (11 > 13) BF06

K 1200 RS (00 > 04) BF11

CAGIVA

Mito 125 BF05

DUCATI

Monster 696 - 796 - 1100 (08 > 11) BF09

848 - 1098 - 1198 (07 > 11) BF08

Monster 1100 Evo (11 > 13) BF09

Multistrada 1200 (10 > 13) BF11

Ducati Monster S2R – S4R BF08

HONDA

CB 600 F Hornet / Hornet ABS (07 > 10) BF03

CBF 600S/ CBF 600N (04 > 11) BF03

CBR 600 RR (05 > 06) BF03

CBR 600 RR (07 > 09) BF03

CBR 600 F (11) BF03

Hornet 600 (11) BF03

NT 700 Deauville (06 > 11) BF03

XL 700 V Transalp (08 > 11) BF03

VFR 800 VTEC (02 > 11) BF03

CBR 1000 RR (08 > 11) BF03

CB 1000 R (08 > 11) BF03

CBF 1000 / CBF 1000 ST (10 > 11) BF03

CBF 1000 (06 > 09) BF03

VFR 1200 F (10 > 11) BF03

Honda Crosstourer 1200 (12) BF03

KAWASAKI

650R Ninja (05 > 08) BF04

650R Ninja / ER-6F 650 (09 > 11) BF04

ER-6N / ER-6F 650 (12) BF04

Versys 650 (10 > 13) BF04

ZX-6R (09 > 12) BF04

Z 750 (07 > 12) BF04

Versys 1000 (12) BF04

Ninja 1000 (11 > 13) BF04

ZX10R (10 > 11) BF04

MODEL - CC. - YEAR FLANGE NOTE

KTM

Duke 125 (11) BF12

MV

Agusta Brutale 750 - 910 - 1078 (> 09) BF05

F4 750-1000 BF05

SUZUKI

GSR600 (06 > 11) BF01

GSX-R 600/750 (09 > 11) BF01

GSX650F (08 > 11) BF01

Gladius 650 (09 > 11) BF01

DL 650 V-Strom (04 > 11) BF10

DL 650 V-Strom L2 (11) BF01

GSF 650 Bandit / GSF 650 Bandit S K9 (09 > 11) BF01

GSR 750 (11) BF01

DL 1000 V-Strom (01 > 11) BF10

GSX-R1000 (09 > 11) BF01

GSX1250F (10) BF01

TRIUMPH

Street Triple 675 (07 > 11) BF02

Daytona 675 BF02

Tiger 800 / Tiger 800 XC (11) BF02

Speed Triple 1050 (05 > 11) BF02

Speed Triple 1050 (11) BF02

Sprint ST 1050 (05 > 11) BF02

Tiger 1050 (07 > 11) BF02

Sprint GT 1050 (10 > 11) BF02

Tiger Explorer 1200 (11 > 12) BF02

YAMAHA

FZ6/FZ6 600 Fazer (04 > 06) BF05

FZ6 S2 / FZ6 600 Fazer S2 (07 > 11) BF05

XJ6 / XJ6 Diversion 600 (09 > 11) BF05

YZF R6 (06 > 11) BF05

MT 03 600 (06 > 11) BF05

FZ8 / Fazer 8 (11 > 13) BF05

TDM 900 (02 > 11) BF05

FZ1 (06 > 11) BF05

FZ1 Fazer (06 > 11) BF05

YZF R1 1000 (09) BF05

YZF R1 1000 (10 > 11) BF05

XTZ 1200 (11 > 13) BF05

FJR 1300 (06 > 11) BF05

XJR 1300 (07 > 11) BF05

38

HELMETS


HPS HELMETSA quality product is the result of combining its individual components produced to the highest quality.

This occurred also for the HPS Project (abbreviation of Head Protection System), in which GIVI has conveyed its understanding/experience of advanced plastic technology, its knowledge of a wide range of specific materials, a deep technical research and new design solutions.

The HPS range of helmets GIVI created fully satisfies the expectations and the needs of every rider living in the modern urban and suburban environment.

TECH INFO > ICONS

39

HELM

ETS


Predisposizione PinlockProvision for Pinlock lensPinlock ReadyPosibilidad de montar lente PinlockVorbereitet für Pinlock Linse

Calotta Slim-fitSlim-fit shells sizesSchalen Slim-fitCalotte Slim-fitCalotas externas Slim-fit

Tessuto anallergicoAnallergic fabricAnallergischer StoffTissu anallergiqueTejido antialérgico

Paranaso removibileRemovable breath guardEntfernbarer NasenschutzPare-nez amovibleProtector nariz extraible

Visiera antigraffioAnti-scratch visorKratzfestes VisierÉcran anti-rayuresVisera anti-rasguños

Doppia omologazioneDouble homologationDoppelte ZulassungDouble homologationHomologación doble

guanciali removibiliremovable cheek padsEntfernbare Wangenpolsterjoues amoviblesalmohadillas extraíbles

due taglie per tuttitwo sizes fit all zwei Größen fűr Alledeux tailles pour tousdos tallas para todos

Interno removibileRemovable inner liningEntfernbares InnenfutterInterieur amovibleInterior extraible

PesoWeightGewichtPoidsPeso

Doppia visieraDouble visorDoppeltes VisierVisière doubleDoble visera

Doppio anelloDouble D-ringDoppel-D RingBoucle double-dDoble d-ring

Sgancio micrometricoMicrometric systemMikrometische SchnalleBoucle micrométriqueEnganche micrométrico

TagliaSizesGrößeTaillesTalla

2 Calotte2 Shells sizes2 Schalen2 Calottes2 Calotas externas

TecnopolimeroTechnopolymerTechnopolimerTechnopolymèreTecnopolímero

Fibra tricompositaTricomposite fibreKompositfasernTri-compositeFibra, carbono, kevlar

Interno fissoFixed inner liningFestes InnenfutterInterieur fixeInterior fijo

Fibra compositaComposite fiberKomposit FiberFibra compuestaFibres composites

TECH INFO > ICONS

40

HELMETS


COLOUR RANGE

INFO

OPTIONAL

x.01 TOURER

Hx01DB910wHITE

Hx01DN900MATT BLACK

Hx01DG730SILVER

TECH INFO > x.01 TOURER

The newest version of the helmet with removable chin rest is inspired by the off-road world, specifically aimed toward the adventure touring rider.

41

HELM

ETS


INFO

OPTIONAL

Hx01DB910wHITE

Hx01DN900MATT BLACK

Hx01DG730SILVER

TECH INFO > x.01 TOURER

gr. 1600±50

WEIGHT SIZE STC

REMOVABLE REMOVABLE ANTIALLERGIC ANTISCRATCH

DOUBLE VISOR

I302B Z1890PR

Z876R Z2261R

Z2246R Z1897R

SIZEXS54

S56

M58

L60

XL61

The newest version of the helmet with removable chin rest is inspired by the off-road world, specifically aimed toward the adventure touring rider.

The helmet has double homologation which allows its use with or without the chin rest as a full face or jet style helmet. One of the main characteristics that supports the superiority of this helmet is the spoiler, an aesthetic and functional element that, like the chin rest,can be easily removed. Maintaining aesthetics, in addition to reducing noise, the mounting points of the chin rest can be covered by a special cover.The inner liner and cheek pads are made in an antiallergenic material and are totally removable and washable. The chin strap is designed with a quick-release buckle featuring micrometric adjustment.

Optional

• I302B is a Bluetooth® interphone designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communications while riding. It can also be connected to a Bluetooth® cell phone for hands-free communication.

• Antifog lens Pinlock Original• Anti-fog spray – Applied inside the visor, it prevents misting, guaranteeing

excellent visuals in every condition.• Anti-fog adhesive lens similar to pin-lock used by professional riders, prevents

fogging and the condensation on the visor.

HX01D HX01DB910_ _ (white)

$ 329,00HX01DN900_ _ (matt black)HX01DG730_ _ (silver)

Complete with caps for jet version and Anti-scratch visor transparent predisposed to mount Pinlock lense

Z1890PR Clear visor PINLOCK enabled $ 58,00Z2261R PINLOCK Anti-fog lens $ 45,00I302B Interphone Bluetooth $ 160,00

Z2246R Ventilation caps for Tourer version whitout Spoiler $ 12,00Z876R Anti-fog adhesive lens $ 48,00

Z1897R Anti-fog spray kit $ 14,00ZH101 Helmet holder $ 22,00

42

HELMETS


COLOUR RANGE

INFO

OPTIONAL

x.01 ExPLORERDual configuration (and homologation) transforms this helmet from a jet helmet to a full-face helmet by installing one of the two chin-guards supplied.

Hx01FG730SILVER

Hx01FB910wHITE

Hx01FN900MATT BLACK

TECH INFO > x.01 GRAPHIC

43

HELM

ETS


INFO

OPTIONAL

Hx01FG730SILVER

Hx01FB910wHITE

Hx01FN900MATT BLACK

TECH INFO > x.01 GRAPHIC

gr.1490

WEIGHT SIZE STC

REMOVABLE REMOVABLE ANTIALLERGIC ANTISCRATCH

DOUBLE VISOR

SIZEXS54

S56

M58

L60

XL61

Dual configuration (and homologation) transforms this helmet from a jet helmet to a full-face helmet by installing one of the two chin-guards supplied.

This helmet has been intentionally crafted for comfortable and safe use in both summer and winter seasons. From a conceptual stand point, the mere availability of this helmet dismisses the belief that there is nothing new in the motorcycle helmet market. The two different specific chin rest choices provide comfort dependent on the weather condition, this feature alone makes the X.01 a technologically innovative product that is less complicated, and lighter than a standard modular helmet. The summer chin rest protects like a standard full face, yet offers ventilation similar to a jet helmet. The double homologation allows the X.01 to be used on the road without the chinrest. In order to maintain aesthetics, the attachment points of the chin guard are covered by the appropriate plugs provided with the helmet. The inner liner and cheek pads are constructed in an antiallergenic material and are totally removable and washable. The chin strap is designed with a quick-release buckle featuring micrometric adjustment. The superior ventilation system is highlighted by three frontal air intakes, two side vents, and one included in the chin restas well as two rear extractors.The specific nose guard is included in the equipment.Optional

• I302B is a Bluetooth® interphone designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communications while riding. It can also be connected to a Bluetooth® cell phone for hands-free communication.

• Anti-fog spray – Applied inside the visor, it prevents misting, guaranteeing excellent visuals in every condition.

• Anti-fog adhesive lens similar to pin-lock used by professional riders, prevents fogging and the condensation on the visor.

HX01FHX01FB910_ _ (white)

$ 329,00HX01FN900_ _ (matt black)HX01FG730_ _ (silver)

Complete with winter and trekker chin rests, caps for jet version and stop wind

Z1890PR Transparent anti scratch visor with provision for Pinlock lens $ 58,00Z2261R Anti-fog lens PINLOCK $ 45,00I302B Interphone Bluetooth $ 160,00Z876R Anti-fog adhesive lens $ 48,00

Z1897R Anti-fog spray kit $ 14,00ZH101 Helmet holder $ 22,00

I302B Z1890PR

Z876R Z2261R

Z2246R Z1897R


ACCESSORIESAIRSTARS & SPOILERS

S320 - LED FOG LAMPSPair of universal fog lamps with LED technology and aluminum housing.Electrical usage - 14w eachThis product can mount onto engine guards with a diameter range between 21 mm and 25 mm.

S310 - TREKKER LIGHTSPair of universal additional spotlights with halogen lights, to be mounted on tubular engine guards (ø minimum 21mm and ø maximum 26mm). They must be connected to the battery of the motorcycle, and they have a switch to be mounted onto a tubular handlebar.They do not require any modification to the electrical system of the motorcycle.

S320Pair of universal fog lamps with LED technology and aluminum housing

$ 375,00

S310 Additional halogen spotlights $ 211,00

Z2256Pair of halogen bulbs replacement 12V 55W H3 for spotlights S310

$ 30,00

Z2257Pair of halogen bulbs replacement 12V 35W H3 for spotlights S310 - recommended for applications of 650CC and under

$ 30,00

S952-S953-S954-S955 - SMARTPHONE/GPS HOLDER

Givi introduces a new series of waterproof smartphone holders and navigator holders. They include a new quick lock/unlock system, suitable for tubular handlebars. All these models share the following features: sun visor, zip opening, EVA vibration-absorbing devices, exit for cables, transparent cover for touch screen controls, anti-rain cover, and a fixing system that deserves a brief description. This series is composed of 4 models:

infoMaterial: Polyester / EVA

S951KIT2Universal mounting kit for S952, S953, S954 and S955 to fit on motorcycles fitted with handlebar risers

$ 21,00

S952Smart phone / GPS holder for handlebar mounting suitable for screens up to 3.5 inches.

$ 63,00

S953Smart phone / GPS holder for handlebar mounting suitable for screens up to 4.3 inches.

$ 63,00

S954Smart phone / GPS holder for handlebar mounting suitable for screens up to 5 inches. Suitable for Galaxy S2.

$ 63,00

S955 Smart phone holder for handlebar mounting suitable for I-Phone 5. $ 52,00

NEw

NEw

45

ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS


S900A - SMART BARUniversal aluminum handle bar to install GPS holders, Smartphone holders, electronic device holders for road use.To be combined with the specific screw kits _ _ _SKIT. The aluminum bar can be custom sized by the user to ensure a suitable fit.

infoMaterial: Aluminum

S350-S351 - TREKKER STRAPS

S900AUniversal aluminum handle bar to install GPS holders, Smartphone holders, electronic device holders for road use.

$ 159,00

S350 - Width 25 mm and length 1700 mm.Maximum traction load 100 kg.S351 - Width 20 mm and length 1000 mm.Maximum traction load 75 kg.

S350


$ 19,00

S351


$ 15,00

Ex1SRAExpandable aluminum bag holder to fit on the aluminium rear supports SRA_ _. Width from 413 to 513 mm.Suitable for the transportation of roll bags with a capacity from 30 to 50 Lts. Max load 6 Kg

infoMaterial: Aluminum

EX1SRA Expandable aluminum bag holder $ 175,00

NEw

NEw

46



S220Padlock with retractable wire and combination lock. Perfect to secure the helmet to the motorcycle or the top case to the plate.This product offers a practical deterrence against theft.

S220 Padlock with retractable wire and combination lock $ 22,00

S850 Universal holder $ 69,00

The new GPS universal holder S850 enables the use of the most widespread GPS models available for cars on the bike.The fitting of the S850 does not require brackets or other supports as it is mounted directly on the handlebar of the motorbike or scooter through Velcro straps. The S850 is equipped with a main compartment for the GPS (provided with an exit for any cable of the GPS) and also with a further compartment for small items (keys, mobile phone, etc…). All zips are waterproof and to ensure a total water resistance it comes complete with a rain cover.

S850

info

Material: Nylon / PU

S950

info

Material: Nylon / EVA

S950 Universal holder $ 80,00

The New GIVI S950 GPS system carrier easily fits to majority of motorcycles and to some scooters, since it can be mounted to tubular handlebars through the robust supports with which it is equipped. Moreover, it can be easily locked thanks to the rapid lock/unlock system. The S950 permits the use of the same device you have in your car, or your smart phone (if it is fitted out with integrated GPS system and with satellite navigation software), since it allows for both horizontal and vertical screen viewing. There is also access for external cables. The S950 external protective cover is semi-rigid and the device is equipped with a practical anti-rain lining, which guarantees an effective barrier for water, without interfering with the use.

NEw

47

ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS


S200Provides dust protection during the winter rest

info

Material: transpirant texture

S200Bike cover.Colour: light grey (not waterproof)

$ 37,00

COOL DRy SEAT COVERReversible: classic black seat cover in waterproof fabric on one side; covered with refreshing gray material on the other side.

SC131 Specific for Piaggio Vespa GTS 300 Super (08 > 13) $ 48,00

SC134Specific for Piaggio MP3 Touring 300-400 (11 > 12) and Piaggio MP3 125-250-300-400 (06 > 13)

$ 48,00

SC227 Specific for Honda SH 125i / 150i (09 > 13) $ 48,00

SC231 Specific for Honda PCX 125 (11 > 13) $ 48,00

SC349Specific for Piaggio Beverly 125ie-300ie (10 > 13) and Piaggio Beverly 350 Sport Touring (12 > 13)

$ 48,00

SC2013Specific for Yamaha T-Max 530 (12 > 13) and Yamaha T-Max 500 (08 > 13)

$ 48,00

infoMaterial: waterproof tissue

S201L-S201xLMotorcycle covering for sport and scooters models, chain lock loop equipped.

info

Material: polyester 210D laminated PU1000mm

S201L Motorcycle covering for sport and scooters models $ 63,00

S201XL Motorcycle covering for big motorcycles and scooters $ 63,00

48



T10NElastic carrying net to fasten various objects on the cover of the cases or on the luggage carrier of the motorcycle.

T10N Elastic carryng net $ 18,00


$ 13,00

S300Security accessories kit complete with reflector triangle and reflective jacket.

S300 Security accessories kit complete $ 23,00

TM418Yet another URBAN model, this time to mount on your vehicle. It is a previously unseen version of hand protectors: GIVI has made them in rain resistant polyester with an internal lining that keeps the fingers warm in all conditions. The use is universal as the TM418 pair adapts to every type of handle-bar and rear-view mirror. The structure is rather rigid for easier and quicker accessibility of the hands.

TM418Pair of protective handle-bar gloves for motorcycles and scooters adjustable for use with fixed mirror.

$ 105,00

info

Material: nylonInner linning: lambkin


ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS

AIRSTARS & SPOILERSRegarding the styles and the materials, the “screen” collection of GIVI is the largest on the market and pays much attention to the current trends. The range includes screens and aerodynamic spoilers equipped with specific fitting kits for the most popular naked motorcycles, road and sportive motorcycles. This collection also provides solutions for the proposed for tourer, sport-tourer and cruiser, with universal and dedicated screens and windshield.

And, finally, paying attention to the scooter world, for which GIVI has been long been renowned, the windscreen for each outbound model, from 50 cc to big engine capacity. Among the latest news we bring attention to the airstars for scooters, complete with serigraphy at the bottom for strong visual impact and the new entry Airflow, the windscreen with adjustable spoiler, designed by R&D department of the company, which has no rivals in terms of versatility and protection.



COLLECTIONThe appeal for “naked bikes” continues to interest a great number of motorcyclists.For these motorcycles GIVI has developed and realized a range of universal screens with a simple but elegant design, that ensure good protection levels without spoiling the lines of the bike. The fitting, with 2 or 4 joint points, is quick and easy thanks to the stainless steel bars with clamps adjustable to the brackets.The 8 models available (5 with 2 joint points and 3 with 4 joint points) meet the needs of the most demanding motorcyclists.

AIRSTAR

A660Universal screen with 2 point handlebar, smoked17H x 17.2W inches

$ 156,00

A601Universal screen with 2 point handlebar,smoked16.75H x 14.5W inches

$ 123,00

A602Universal screen with 2 point handlebar,smoked15.75H x 21W inches

$ 151,00

A603Universal screen with 2 point handlebar, smoked14.75H x 17.25W inches

$ 118,00

A604Universal screen with 2 point handlebar, smoked17.5W x 14.9W inches

$ 123,00

A34+D45

Universal screen with 4 point handlebar, smoked19.25H x 19.5W inches

$ 84,00 $ 75,00

A31+D45

Universal screen with 4 point handlebar, smoked19.5H x 25W inches

$ 103,00 $ 75,00

A32 s+D45

Universal screen with 4 point handlebar, smoked18H x 21W inches

$ 152,00 $ 75,00

AF49Universal sliding wind-screen, transparent, with 4 point handlebar complete with fitting kit D45. Maximum height 20.9 inches (4.7 inches of extension) width 20.5 inches

$ 307,00


ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS

COLLECTIONThe universal GIVI cockpits represent an excellent example of the great attention that GIVI draws to the stylish design and to the quality level of its products. Each version is characterised by its unique style and by the capacity to perfectly adapt to the line of the front chassis. A GIVI cockpit can be light and less intrusive or can distinguish with a determined design the character of a sportbike.Each version is made with a painted lower part in specific colours, fitted to a plexiglass screen. The functionality of these items is guaranteed by the use of universal fitting kits that make the fitting extremely quick and easy.

NAKED wITH UNIVERSAL FITTING KIT

A200 Universal screen, smoked11.5H x 12W inches $ 95,00

A210 Universal screen, smoked13.4H x 11.6W inches $ 106,00

240A+A240A

Specific screen, smoked13H x 14.25W inches

$ 106,00 $ 21,00

NAKED wITH SPECIFIC FITTING KIT

245N+A167A

Suzuki GSR 600 (06 > 07)Specific screen, black13.19H x 11.42W inches

$ 101,00 $ 58,00

A780Ducati Monster 696-1100 (08 > 14) Specific screen, smoked13.4H X 15.7W inches

$ 201,00

247A+A1101A

Honda CB1000R (11 > 14) Specific screen, smoked11.4H x 11.2W inches

$ 105,00 $ 85,00

A447Kawasaki Z1000 (07 > 09)Specific screen, smoked13.4H X 13.4 W inches

$ 148,00

A287Yamaha FZ8 / Fazer 8 (11 > 14)Specific screen, smoked11H x 11.8W inches

$ 170,00

A287NYamaha FZ8 / Fazer 8 (11 > 14)Specific screen, black11H x 11.8W inches

$ 191,00

247N+A448A

Kawasaki ER-6n (09 > 11)Specific screen, black11.4H x 11.2W inches

$ 95,00 $ 34,00

247A+A448A

Kawasaki ER-6n (09 > 11)Specific screen, smoked11.4H x 11.2W inches

$ 105,00 $ 34,00



COLLECTIONUnsurpassed in the number of proposals, construction quality and aesthetic lines, the range of specific GIVI Spoilers’ highlights once again the extensive knowledge of the field by technical staff, driven by great passion for “two wheels”. The excellent aerodynamic performance of these accessories aesthetic / functional is accompanied by the choice between different profiles. With heights varying from 5 / 8 cm above average, the GIVI spoiler adds a touch of personality without distorting the original design. Available for most motorcycles on the market.

SPOILER

D5101STBMW G650GS (12 > 14)Specific screen, clear16.14H x 15.35W inches

$ 133,00

D272STDucati Multistrada 1200(10 > 12)Specific screen, transparent23.6H x 18.5W inches

$ 148,00

5107DT+D5107KIT

BMW F700GS (13 > 14) NEWSpecific screen, clear19.6H x 19.2W inches

$ 135,00 $ 45,00

147A+A5100A

BMW R1200R (11 > 14) NEWSpecific screen, clear11.4H x 11.2W inches

$ 150,00 $ 80,00

5108DT+D5108KIT

BMW R 1200 GS (13 > 14) NEWSpecific screen, clear55H x 44,5W inches

$ 150,00 $ 45,00

D5108BBMW R1200GS (13 > 14) NEWSpecific low and sports screen gloss black19H x 13.9W inches

$ 120,00

D5109STBMW F800GT (13 > 14) NEWSpecific screen, clear24.4H x 27.8W inches

$ 160,00

D7401STDucati Multistrada 1200(13 > 14) NEWSpecific screen, clear22H x 16.5W inches

$ 149,00

D1121STHonda CB 500 X (13 > 14) NEWSpecific screen, clear19.3H x 13.7W inches

$ 135,00


ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS

D1111STHonda NC700X (12 > 14) Specific screenclear 19.5H x 16.2W inches

$ 133,00

D410STKawasaki Versys 650 (10 > 14)Specific screen, transparent18.9H x 14.6W inches

$ 127,00

4100D+D4100KIT

Kawasaki Ninja 1000 (11 > 14)Specific screen, smoked22H x 14.57W inches

$ 148,00 $ 27,00

D407STKawasaki Concours 14(08 > 14)Specific screen, clear22.8H x 20.9W inches

$ 134,00

3101DT+D3101KIT

Suzuki DL650 V-Strom L2(12 > 14)Specific screen, clear20.5H x 18.1W inches

$ 148,00 $ 16,00

D1119SHonda CBR 500 R (13 > 14) NEWSpecific screen, smoked with logo GIVI-LCR Team13.7H x 12W inches

$ 145,00

6401DT+D6401KIT

Triumph Tiger 800 (11 > 14)Specific screen, clear20.86H x 18.30W inches

$ 148,00 $ 42,00

D7703STKTM 1190 Adventure / Adventure R (13 > 14) NEWSpecific screen, clear14.5H x 16.1W inches

$ 149,00

D6403STTriumph Tiger Explorer 1200 (12 > 14) Specific screen, clear20.1H x 17.7W inches

$ 148,00

D437SYamaha FZ1 Fazer 1000(06 > 14)Specific screen, smoked21H x 18W inches

$ 111,00

D2109STYamaha FJR 1300 (13-14) NEWSpecific screen, clear21.7 x 20.8 in (H x W)

$ 160,00

D447STYamaha XTZ1200 (11 > 14)Specific screen, clear22.4H x 17.3W inches

$ 159,00



COLLECTIONThe GIVI wind-screen range couldn’t exclude the specific models for scooters and maxi scooters.The excellent aerodynamic performance, combined with the better quality of materials used, guarantee maximum comfort during the urban and suburban use of the vehicle. GIVI spoilers reflect the original model to avoid compromise of the vehicle’s design.

AIRSTAR FOR SCOOTER

D322STHonda PCX 125 (10 > 12) / PCX 150 (13 > 14) Specific screen, trasparent23.4H x 17.3W inches

$ 101,00

D293STKymco Xciting 250-500(05 > 12)Specific screen, clear34.3H x 25.2W inches

$ 167,00

D294STKymco People GTI 125-300 (10 > 12)Specific screen, clear32.1H x 25.2W inches

$ 180,00

D322SHonda PCX 125 (10 > 12) / PCX 150 (13 > 14)Specific screen, smoked23.4H x 17.3W inches

$ 105,00

D1123STHonda Forza 300 ABS(13 > 14) NEWSpecific screen, clear28.7H x 23.2W inches

$ 169,00

D295STKymco Xciting R 500i(13 > 14) NEWSpecific screen, clear33.6H x 26W inches

$ 185,00

214DT+D214KIT

Honda Silver Wing 600(01 > 13)Specific screen, clear24.8H x 23.6W inches

$ 111,00 $ 16,00

D5106STBMW C 650 GT (13 > 14) NEWClear screen. Composed of three pieces - main screen-blade and two hand protectors31.8H x 22.8W inches

$ 275,00

D5105STBMW C 600 Sport (13 > 14) NEWClear screen. Composed of three pieces - main screen-blade and two hand protectors.28.9H x 28.7W inches

$ 275,00


ACCE

SSOR

IES

AIRS

TARS

& S

POIL

ERS

104A+A104A

Piaggio Vespa 125-200 Granturismo (03 > 08) / Vespa GTS 250 (06 > 09) / Vespa LX 50-125-150 (05 > 12) / Vespa GTS 300 Super (08 > 12)Specific screen, clear 20.3H x 27.4W inches

$ 111,00 $ 55,00

106A+A106A

Piaggio Beverly 500 (03 > 07) / Beverly Tourer 250-500 (08 > 11)Specific screen, clear12.6H x 24.2W inches

$ 94,00 $ 57,00

357A+A357A

Piaggio Beverly 350 (12 > 13)Specific screen, clear12.6H x 18.1W inches

$ 49,00 $ 69,00

358A+A358A

Piaggio Beverly 350 (12 > 13)Specific screen, clear19.1H x 28H inches

$ 95,00 $ 90,00

D650STSym Citycom 300 (08 > 12) Specific screen, clear25.2H x 21.7W inches

$ 127,00

D263STSuzuki AN 650 Burgman Executive (05 > 12)Specific screen, clear30.9H x 28.3W inches

$ 173,00

D137STYamaha Majesty (04 > 13)Specific screen, clear29.1H x 25.2W inches

$ 169,00

D442STYamaha T-Max 500 (08 > 11)Specific screen, clear19.7H x 22.44W inches

$ 186,00

D442BYamaha T-Max 500 (08 > 11)Specific screen, black23.23H x 17.72W inches

$ 164,00

340D+D340KIT

Piaggio MP3 500 (07 > 13)Specific screen, smoked25.25H x 21.25W inches

$ 175,00 $ 69,00

5606A+A5606A

Piaggio Beverly 350 Tourer (12 > 14) NEWSpecific screen, clear18.5H x 28.3W inches

$ 99,00 $ 70,00

443A+A443A

Kymco People GTi 125-300 (10 > 12)Specific screen, clear20.8H x 28.4W inches

$ 111,00 $ 85,00

56 THE ITALIAN SIGN OF MOTODESIGN


COLLECTIONAIRFLOW is a universal wind-screen in the real meaning of the word. Not only because it adjusts itself to each model of motorcycle or scooter, but also for its capacity to adjust, in a few seconds, to the motorcyclist’s height and the weather conditions. The adjustable height spoiler applied to the base screen makes this item unique. The AIRFLOW spoiler offers a bigger visibility in case of rain, it also reduces the air turbulence and increases the aerodynamic protection… all in a very few seconds! The spoilers’ changeable trim allows you to choose amongst three positions: low, medium and high. The component is furthermore completely collapsible removable.

AIRFLOw

AF7703

KTM 1190 Adventure R(13 > 14) NEWSpecific sliding wind-screen clear, Airflow. Maximum height 25.1 in (4.7 in of extension), width 16.1 inches

$ 240,00

AF3101

Suzuki V-Strom DL650 (12 > 14) Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 22 cm (4.7 inches of extension) width 16.9 inches

$ 265,00

AF260

Suzuki V-Strom DL650 (04 >11) / VStrom DL1000 (04 >12)Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches

$ 265,00

AF5107

BMW F700GS (13 > 14) NEWSpecific sliding wind-screen clear, Airflow. Maximum height 20.8 in (4.7 in of extension) width 20 inches

$ 250,00

AF330

BMW R1200GS (04 >12)Specific sliding wind-screen, transparent, complete with fitting kit.Maximum height 21.3 inches (4.7 inches of extension) width 21.3 inches

$ 265,00

AF447

Yamaha XTZ1200 (11 > 14)Specific sliding wind-screen, transparent, complete with fitting kit.Maximum height 24 inches (4.7 inches of extension), width 16.9 inches

$ 265,00

AF442

Yamaha T-Max 500 (08 > 11)Specific sliding wind-screen, transparent, complete with fitting kit.Maximum height 35.4 inches (4.7 inches of extension) width 22.8 inches

$ 285,00

AF6403

Triumph Tiger Explorer 1200 (12 > 14) NEWSpecific sliding wind-screen, clear, complete with fitting kit. Maximum height 21.7 in (4.7 in of extension) width 17.7 inches

$ 239,00

AF6401

Tiumph Tiger 800 (11 > 14)Specific sliding wind-screen, clear complete with fitting kit.Maximum height 23.8(4.7 inches extension)width 17.9 inches

$ 265,00

57

BACK

REST

S &

ENGI

NE G

UARD

S


ENGINE GUARDSConceived with the aim to provide side protection to the propulsors of trail bikes, the engine guard is today a very useful accessory also for riders of naked and custom bikes as well as of unfaired/semi-faired bikes. Should a fall of the motorcycle occur, for instance while on the stand, the engine guard may really reduce damages.The wide range of engine guards developed and produced by GIVI includes specific solutions for a lot of bike models (for custom motorcycles they are available chromed).The characteristics of the materials used offer an excellent result, guaranteed by the long GIVI experience.

infoMaterial: metalFinished in black mat or chromed depending on the different motorcycle models

TN690 BMW F650GS / F800GS (08 > 14) $ 233,00

TN5108OX BMW R1200 GS (13>14) NEW $ 375,00 TN5100 BMW R 1200 R (11 > 13) $ 229,00 TN1111 Honda NC700X (12 > 14) $ 200,00

TN7703KTM 1190 Adventure /Adventure R (13 > 14) NEW $ 299,00 TN532 Suzuki V-Strom DL650

(04 > 13) $ 162,00 TN528 Suzuki DL 1000 V-Strom (04 > 12) $ 162,00

TN6403 Triumph Tiger Explorer 1200 (12 > 14) $ 200,00 TN352 Yamaha FZ8 / Fazer 8

(10 > 14) $ 170,00 TN7401 Ducati Multistrada (10>14) NEW $ 220,00

58

BACKRESTS &ENGINE GUARDS


RP5103 BMW F650GS / F800GS (08 > 14) NEW $ 186,00 RP6403 Triumph Tiger Explorer

1200 (12 > 14) $ 186,00 RP7703 KTM 1190 Adventure /Adventure R (13 > 14) NEW $ 275,00

BACKRESTSGIVI satisfies not only the motorcyclist’s needs, but the passenger’s needs too.A wide range of specific backrests made in Polyurethane foam, provides more comfort to the journey of the passenger. It can be mounted with or without the case (it depends on the model of the case).You will find some mounting examples, please view our list in order to verify the availability on other motorcycle models not illustrated in here.

infoHolders material: metalBackrests material: Polyurethane foam

TB531 Suzuki Burgman 400(07 > 14) $ 78,00 TB48 Yamaha Majesty 400

(04 > 14) $ 73,00 TB53 Yamaha T-Max 500(08 > 11) $ 117,00

SKID PLATESSpecifically designed based on the motorcycle model, the aluminium oil carter protectors make the image of maxienduro even more “off road”; they also protect the oil carter from rocks, bumps and holes that can be found, as well as when off-road, even on less challenging roads.

infoMaterial: Alluminium

TB19 Honda Silver Wing 600 (01 > 13) $ 84,00

59

GALL

ERY


SPORTCITy ONE 50-125 (08 > 11)price

SR740Special rack for MONOLOCK® boxes. Maximum load allowed 3 kg / use the plate included in the box

$ 143,00

134A Specific screen, transparent 26H x 26.4W inches $ 95,00

136A Specific screen, transparent 29.1H x 26.4W inches $ 117,00

A151A Specific fitting kit for 134A and 136A $ 85,00

accessories

SR740 134A 136A

SPORTCITy CUBE 125-200-300 (08 > 11)priceE319 Specific rear plate for

MONOLOCK® case $ 64,00




accessories

E319 134A + A150A

60

GALLERY


C 600 SPORT (12 > 14)price

SR5105Specific plate for MONOKEY® boxes. MONOKEY® plate M5 in nylon included

$ 158,00

SR5105MSpecific plate for MONOLOCK® boxes. MONOLOCK® plate M5M in nylon included

$ 158,00

SRA5105

Specific plate in aluminium for Monokey® cases. Maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 199,00

TE5105Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage

$ 127,00

accessories

SRA5105

F 650 GS / F 800 GS (08 > 14)price

E194Specific rear plate for MONOKEY® case. MONOKEY® plate M5 in nylon included / Is compatible with the rear plate

$ 117,00

SRA5103

Specific plate in aluminium for Monokey® cases. Maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / Can not be mounted with art. PL690

$ 169,00

PL690Tubular pannier holder for MONOKEY® boxes. Mounting is only possible with the plate E194

$ 233,00

PLR5103 Rapid release tubular side-case holder for MONOKEY® cases $ 243,00

BF15 Specific metal flange for fitting the TankLock tank bags $ 65,00

333DTSpecific screen, clear17.3H x 18.1W inches. 10.24 inches higher than F650GS / 8.66 inches higher than F800GS

$ 138,00

D333KIT Specific fitting kit for 333DT $ 21,00

TN690Specific engine guard. We recommend fitting by a qualified mechanic

$ 233,00

RP5103 Oil carter protector in Aluminium $ 186,00accessories

SRA5103 PL690 333DT TN690 RP5103

61

GALL

ERY


R 1200 GS (04 > 12)

accessories

MULTISTRADA (10 > 14)

accessories

SRA692 PLR684 PLR684 AF330 TN689

price

SRA692

Specific plate in aluminium for Monokey® cases. It can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11

$ 292,00

SR689Special rack for MONOKEY® boxes. MONOKEY® plate M5 in nylon included / in replacement of original rack / is compatible with the original side case holder

$ 134,00

SR684Special rack for MONOKEY® boxes. To fit to the original rack / maximum load allowed 6 Kg / MONOKEY® plate M5 in nylon included / year ’04 - ’11

$ 114,00

PL684 Tubular pannier holder for MONOKEY® boxes $ 218,00


330DTSpecific screen, clear 20.3H x 22.2W inches. 5.7 inches higher than original / adjustable as the original

$ 163,00


AF330Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 21.3 inches (4.7 inches of extension) width 21.3 inches

$ 265,00

TN689 Specific engine guard. We recommend fitting by a qualified mechanic $ 223,00

BF07 Specific metal flange for fitting the TankLock tank bags - only year ’08 $ 17,00

BF06 Specific flange for fitting the TankLock tank bags - year ’09 - ’12 $ 17,00

BF13 Specific flange for fitting the TankLock tank bags - for R1200GS Adventure $ 17,00

SR312 PLXR312 PLXR312 D272ST

price

SRA7401

Specific plate in aluminium for Monokey® cases / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case

$ 199,00

SR312Specific plate for MONOKEY® boxes. MONOKEY® plate M5 in nylon included / is compatible with the original side case holder

$ 159,00


PLXR312Rapid release tubular side-case holder for MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDECASES

$ 243,00

D7401STSpecific screen, transparent 22 x 16.5 in (H x W) / to be mounted instead of the original screen / only years ’13-’14

$ 149,00

D7401NOSpecific screen, matt black 13.7 x 11 in (H x W) / to be mounted instead of the original screen

$ 110,00

D272STSpecific screen, transparent 23.6H x 18.5W inches. 3.5 inches higher than original - only year ‘10 - ’12

$ 148,00



ES7401Specific support in aluminum and stainless steel to widen the surface support area of the original side stand

$ 45,00

62

GALLERY


PCx 125 (10 > 12) / PCx 150 (13 > 14)price

E231

Specific rear plate for MONOLOCK® case. Maximum load allowed 3 kg / use the plate included in the box / you must puncture the housing in arranged sections

$ 53,00

D322STSpecific screen, trasparent, 23.4H x 17.3W inches.7.3 inches higher than original

$ 101,00

D322S Specific screen, smoked, 23.4H x 17.3W inches $ 105,00

323DTSpecific screen, clear,32.3H x 22.8W inches.16.1 in higher than original.

$ 186,00

D323KIT Specific fitting kit for 323DT.Does not fit PCX 150 $ 13,00

SC231 Dry-Cool seat cover specific $ 48,00

accessories

E231 D322ST D322S 323DT

SH 125I-150I (09 > 12)price

E227Specific rear plate for MONOLOCK® case. Maximum load allowed 3 kg / use the plate included in the box

$ 37,00

P205 s

Single tubular side-case holder. Compatible with the following Soft Bags:T467 - T457 - T450 / You have to mount it on the right side of the scooter

$ 101,00



A315A Specific fitting kit for 311A, 313A and 311ASP $ 53,00


accessories

P205 s 311A 313A

63

GALL

ERY


DN-01 (08 > 12)price

265FZSpecific Monorack arms.Only match the plates M5, M5M / maximum load allowed 6 Kg

$ 115,00

PLX204

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES / is mounted in conjuction with Monorack

$ 234,00

D316S Specific screen, smoked26H X 17.7W inches $ 148,00

accessories

265FZ PLX204 D316S

NC 700 x (12 > 14)price

1111FZSpecific Monorack arms.Only match the plates M5, M5M, M6M

$ 112,00


PLX1111Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES

$ 243,00

D1111STSpecific screen, clear19.5H x 16.2W inches.6.5 inches higher than original

$ 133,00

TE1111

Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage. Can be mounted without the Monorack using the 1111KIT

$ 127,00

1111KITSpecific kit to install the TE1111/PL1111/PLX1111 without the Monorack

$ 42,00

TN1111Specific engine guard.We recommend fitting by a qualified mechanic

$ 200,00

accessories

1111FZ PL1111 PLX1111 D1111ST TN1111

64

GALLERY


NT 700 DEAUVILLE (06 > 12)price

E221

Specific rear plate for MONOKEY® case. MONOKEY® plate M5 in nylon included/ for fixing the original lid must be drilled

$ 117,00

E221M

Specific rear plate for MONOLOCK® case. MONOLOCK® plate M5M in nylon included/ for fixing the original lid must be drilled

$ 117,00

D307STSpecific screen, transparent 19.29H x 18.31W inches.3.54 inches higher than the original

$ 106,00


accessories

E221 E221M D307ST

CB 1000 R (10 > 14)price

266FZSpecific Monorack arms.Only match the plates M5, M5M

$ 123,00

A312A s* Specific fitting kit for 247A and 247N $ 64,00

A1101A* Specific fitting kit for 247A and 247N. Compatible from ’11 $ 85,00

TE1101


$ 127,00

1101KIT Specific kit to install the TE1101 without the Monorack $ 74,00


* you can find spoilers prices on page 45

accessories

266FZ 247N + A312A s 247A + A1101A TE1101

65

GALL

ERY


VFR 1200 F (10 > 14) price

267FZ

Specific Monorack arms. Only match the plates M5, M5M / A larger grab rail for the passenger is included, you must remove the original grab rails / is compatible with the original side case holder

$ 125,00

PLX209

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 267KIT

$ 200,00

267KIT Specific kit to install the PLX without the Monorack $ 95,00

D321SSpecific screen, smoked15.7H x 15.7W inches.5.5 inches higher than original

$ 148,00


accessories

267FZ PLX209 D321S

650R NINjA / ER-6N (09 > 11)price

449FZ

Specific Monorack arms.Only match the plates M5, M5M, M6M / you need to remove the handle bar of the scooter to install it

$ 101,00

PLX449

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES / original grabrails should be removed / can be mounted without the Monorack using the PLX449KIT

$ 234,00

PLX449KIT Specific kit to install the PLX without the Monorack $ 105,00

A448A* Specific fitting kit for 247N. Only for 6N models $ 34,00


$ 127,00

BF04* Specific metal flange for fitting the TankLock tank bags $ 17,00


accessories

449FZ PLX449 A448A TE266

66

GALLERY


VERSyS 650 (08 > 09)price

447FZSpecific Monorack arms.Only match the plates M5, M5M / including fixing kit

$ 101,00

PL447Tubular pannier holder for MONOKEY® boxes. Can be mounted without the Monorack using the PLX447KIT

$ 200,00

PLX447

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX447KIT

$ 234,00

PLX447KIT Specific kit to install the PLX without the Monorack $ 29,00

D405ST Specific screen, clear18.1H x 17.5W inches $ 145,00

accessories

447FZ PL447 PLX447 D405ST

VERSyS 650 (10 > 14)price451FZ Specific Monorack arms. Only

match the plates M5, M5M $ 101,00

PLR450Rapid release tubular side-case holder for MONOKEY® cases. Can be mounted without the Monorack using the 450KIT

$ 243,00

PLXR450

Rapid release tubular side-case holder for MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 450KIT

$ 243,00

450KITSpecific kit to install the PLR and the PLXR without the Monorack

$ 80,00

D410STSpecific screen, transparent 18.9H x 14.6W inches.8.3 inches higher than original

$ 127,00


$ 212,00


$ 127,00

BF04 Specific metal flange for fitting the TankLock tank bags $ 17,00accessories

451FZ PLR450 PLXR450 D410ST TN422

67

GALL

ERY


NINjA 1000 (11 > 14)price

4100FZSpecific Monorack arms. Only match the plates M5, M11, M5M / it is not compatible with the original sidecase holder

$ 123,00

PLXR4100


$ 243,00

4100KITSpecific kit to install the PLXR4100 without the Monorack

$ 105,00

4100DSpecific screen, smoked 22H x 14.57W inches. 5.51 inches higher than original

$ 148,00

D4100KIT Specific fitting kit for 4100D $ 27,00


$ 127,00


accessories

4100FZ PLXR4100 PLXR4100 4100D

Z 1000 (10 > 13)price

450FZSpecific Monorack arms.Only match the plates M5, M5M / maximum load allowed 6 Kg

$ 123,00

A449Specific screen, smoked16.5H x 14.2W inches. Including fixing kit

$ 201,00

T267Tubular side holder for soft luggage.Can be mounted without the Monorack using the T267KIT

$ 99,00

T267KIT Specific fitting kit for tubular holder $ 53,00


accessories

450FZ A449 T267

68

GALLERY


DL 650 V-STROM (04 > 11) price

E528Specific rear plate for MONOKEY® case. MONOKEY® plate E250 included

$ 96,00


PLR532Rapid release tubularside-case holder for MONOKEY® cases

$ 243,00


$ 200,00

D260STSpecific screen, clear22.4H x 18.9W inches. 7.09 inches higher than the original

$ 133,00

AF260

Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches

$ 265,00


$ 181,00


accessories

E528 PLR532 PLX532 AF260 D260ST

DL 650 V-STROM L2 (12 > 14)

accessories

SRA3101 SR3101 + PL3101 PLR3101 PLX3101 AF3101

priceSR3101

Specific plate for MONOKEY® boxes.Maximum load allowed 6 kg / MONOKEY® plate E250 in nylon included

$ 117,00

SR3101MSpecific plate for MONOLOCK® boxes. Maximum load allowed 3 kg / use the plate included in the box

$ 80,00

SRA3101

Specific plate in aluminium for Monokey® cases, black. Maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 159,00




$ 211,00

AF3101Specific sliding wind-screen, clear, complete with fitting kit. Maximum height inches (4.7 inches of extension) width 16.9 inches

$ 239,00

3101DT Specific screen, clear 20.5H x 18.1W inches $ 148,00D3101KIT Specific fitting kit for 3101DT $ 16,00



RP3101 Oil carter protector in Aluminium $ 186,00


69

GALL

ERY


GLADIUS 650 (09 > 14)price

SR121

Special rack for MONOKEY® boxes. MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg

$ 130,00

SR121M

Special rack for MONOLOCK® boxes. MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg

$ 130,00


$ 234,00

A172Specific screen, fumè11.6 x 12W inches.Including fixing kit

$ 159,00


accessories

SR121 PLX540 A172

TIGER 800 / TIGER 800 xC (11 > 14)price

SR6401Special rack for MONOKEY® boxes. Maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle

$ 134,00

SRA6401

Specific plate in aluminium for Monokey® cases. Maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / you must puncture the housing in arranged sections

$ 265,00


6401DTSpecific screen, clear 20.86H x 18.30W inches. 6.7 inches higher than original

$ 148,00


AF6401Specific sliding wind-screen clear, complete with fitting kit. Maximum height 23.8 (4.7 inches extension) width 17.9 inches

$ 265,00

TN6401 Specific engine guard. We recommend fitting by a qualified mechanic / 2011 only $ 200,00

TN6401A Specific engine guard. We recommend fitting by a qualified mechanic / ‘12-’14 only $ 225,00


accessories

SRA6401 PLR6401 6401DT AF6401 TN6401

70

GALLERY


TIGER 1050 (07 > 13)price

SR225

Special rack for MONOKEY® boxes. MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg / it is not compatible with the original sidecase holder

$ 134,00

PL727Tubular pannier holder for MONOKEY® boxes.Is mounted in conjuction with Monorack

$ 190,00

D225STSpecific screen, clear19.9H x 19.4W inches.4.9 inches higher than the original

$ 134,00

T700KIT Specific kit to install the T704 without the plate $ 53,00

T704Tubular side holder for soft luggage.Can be mounted without the SR225 using the T700KIT

$ 122,00


$ 200,00


accessories

SR225 PL727 D225ST T704 TN225

TIGER ExPLORER 1200 (12 > 14)price

SR6403Specific plate for MONOKEY® boxes. MONOKEY® plate M5 in nylon included

$ 133,00

SRA6403

Specific plate in aluminium for Monokey® cases. Maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 175,00

PLR6403Rapid release tubularside-case holder for MONOKEY® cases

$ 243,00


D6403STSpecific screen, clear20.1H x 17.7W inches. 2 inches higher that the original

$ 148,00

AF6403

Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 21.7 in(4.7 in of extension)width 17.7 in

$ 239,00


$ 200,00

RP6403 Oil carter protector in Aluminium $ 186,00accessories

SRA6403 PLR6403 D6403ST AF6403 TN6403

71

GALL

ERY


FZ-6 S2 / FZ6 FAZER S2 (07 > 10)price

accessories

351FZ + PL360 440D TN358

FZ-8 / FAZER 8 (11 > 14)

accessories

366FZ PLXR366 A287 A287N TN352

351FZSpecific Monorack arms.Only match the plates M5, M5M

$ 101,00

PL360Tubular pannier holder for MONOKEY® boxes.Can be mounted without the Monorack using the 351KIT

$ 200,00

PLX360

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 351KIT

$ 200,00

440DSpecific screen, clear22.44H x 22.44W inches.7.48 inches higher than the original / for faired version

$ 158,00

D440KIT Specific fitting kit for 440D.For faired version $ 22,00

TN358Specific engine guard.We recommend fitting by a qualified mechanic / mount with central tripod mounted

$ 184,00

TE351


$ 127,00

351KITSpecific kit to install the PL360, PLX360 and TE351 without the Monorack

$ 40,00


price366FZ

Specific Monorack arms. Only match the plates M5, M5M / maximum load allowed 6 Kg

$ 112,00

SR2100

Specific plate for MONOKEY® boxes. Maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company

$ 159,00

PLXR366


$ 243,00

366KIT Specific kit to install the PLXR366 without the Monorack $ 42,00

A287Specific screen, smoked11H x 11.8W inches. Including fixing kit / not for faired version

$ 170,00

A287N Specific screen, black11H x 11.8W inches $ 191,00


$ 170,00

TE366

Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage. Can be mounted without the 366FZ Monorack using the 366KIT

$ 127,00


72

GALLERY


FZ-1 (06 > 14)price

accessories

PLX359 PLXR359 TN357

xTZ 1200 (11 > 14)

accessories

SR371 PLR367 D447ST AF447 TN355

365FZ

Specific Monorack arms. We recommend mounting smaller cases MONOLOCK® in conjunction with M5M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg

$ 112,00

PLX359

Tubular pannier holder for V35 MONOKEY® SIDE cases. You can mount only V35 MONOKEY® SIDECASES / you must move the indicators from their original position / can be mounted without the Monorack using the 365KIT

$ 228,00

PLXR359

Tubular pannier holder for V35 MONOKEY® SIDE cases.You must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT

$ 245,00

365KITSpecific kit to install the PLX and the PLXR without the Monorack

$ 32,00


$ 207,00

T271Tubular side holder for soft luggage. Can be mounted without Monorack

$ 73,00


price

SRA2101

Specific plate in aluminium for Monokey® cases. It can be fit with the original side-case / to open the original side -cases you ought to remove the back top case from the plate / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 159,00

SR371

Specific plate for MONOKEY® boxes. MONOKEY® plate M5 in nylon included / is compatible with the original side case holder / to open the original side -cases you ought to remove the back top case from the plate

$ 122,00


D447STSpecific screen, clear 22.4H x 17.3W inches. 5.1 inches higher than the original

$ 159,00

AF447Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 24 inches (4.7 inches of extension), width 16.9 inches

$ 265,00


$ 220,00




PLATE DESCRIPTION PRICE

M5 Monokey® Plate in nylon to be used with Monorack FZ $ 66,00

M7 MONOKEY® plate to be combined with the rear specific fitting kits _ _ _FZ for the fitting of a MONOKEY® case. With painted cover in matt silver available as optional (CM7A900) $ 66,00

M5M Monolock® Plate in nylon to be used with Monorack FZ $ 66,00

M3 Monokey® Plate in nylon with joint set included to be used with Monorack F $ 66,00

MM Monolock® Plate in aluminium with joint set included to be used with Monorack F $ 66,00

M35 Monokey® Plate in aluminium with joint set included to be used with Monorack FL $ 73,00

E251 Monokey® universal plate with fitting kit included for mounting it to tubular carriers $ 74,00

Universal plate included in Monolock cases, to be used on scooter already equipped with rack

IMPORTANT: ALL MONORACk LuggAgE CARRIER SIDE ARMS ARE SOLD SEPARATELy fROM PLATES AND jOIN SET, SO TO ObTAIN A COMPLETE CARRIER yOu wILL hAvE TO ORDER TwO DIffERENT ARTICLES (SEE LIST bELOw). ThE DIffERENT PRICES fOR ThE SIDE ARMS ARE DuE TO ThE DIffERENT COMPLExITy Of ThE CARRIERS whICh vARy ACCORDINg TO MOTORCyCLE MODELS.

PLATES

WINGRACK CHASSIS - FINS

N140 Wingrack2 side frames with indicators included, for 3 Monokey® side cases $ 235,00

N141 Wingrack2 side frames without indicators, for 3 Monokey® side cases $ 191,00

N150 Wingrack2 side frames with indicators included, for 2 Monokey® side bags $ 157,00

N151 Wingrack2 side frames without indicators for 3 Monokey® side cases $ 122,00

PLAT

ES

Description price

74 s = Item available until it runs out of stock THE ITALIAN SIGN OF MOTODESIGN

APRILIA - BMWCAN AM - DUCATI

APRILIASpORTCITY ONE 50-125 (08 > 11)

SR740 Specific rear rack for MONOLOCK® top casemaximum load allowed 3 kg / to be combined with the plate already included in the MONOLOCK® top case $ 143,00




SR 50 DITECh (97 > 03)

SR78 Specific rear rack for MONOLOCK® top caseto be combined with the plate already included in the MONOLOCK® top case $ 76,00

ATLANTIC 200-250 (03 > 09)

D242ST Specific screen, clear 33.1H x 27.6W inches7.5 inches higher than original $ 157,00

SCARABEO 200 (07 > 09)

E318 Specific rear rack for MONOLOCK® top caseto be combined with the plate already included in the MONOLOCK® top case $ 58,00

SpORTCITY 125-200-250 (04 > 08)


128A Specific screen, clear 29.1H x 26.4W inches3.1 inches higher than 105A $ 123,00

105A Specific screen, clear 26H x 26.4W inches $ 89,00


SpORTCITY CUBE 125-200-300 (08 > 11)

E319 Specific rear rack for MONOLOCK® top case $ 64,00




SCARABEO 500 (03 > 06)

D243ST Specific screen, clear 26H x 23W inches7.1 inches higher than original $ 149,00

SCARABEO 500 (07 > 12)

E317M Specific rear plate for MONOLOCK® caseMONOLOCK® plate included / you must puncture the housing in arranged sections / maximum load allowed 3 Kg $ 110,00

130A Specific screen, clear 28H x 28W inches $ 111,00

A130A Specific fitting kit for 130A $ 7,00

ATLANTIC 500 (02 > 06)

D240ST Specific screen, clear 25.5H x 27W inches3.5 inches higher than original $ 154,00

Description price


APRI

LIA -

BMW

CAN

AM -

DUCA

TI

DORSODURO 750 (11 > 14)

SR6700M Specific plate for MONOLOCK® boxesMONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections $ 191,00

TE6700 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage $ 130,00

ShIVER 750 (07 > 10)


ShIVER 750 (11 > 14)

6702FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / A handle bar for the passenger is included, you must remove the original grab rails $ 148,00



MANA 850 (09 > 14)

732FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / you must remove the grab handles / is compatible with the original side case holder $ 94,00

ETV 1000 CApONORD (01 > 08)

PL313 Specific pannier holder for MONOKEY® side cases $ 229,00

D239ST Specific screen, clear 25H x 18.25W inchescompatible with year 2003 / without protective spoiler $ 119,00


BMWC 600 SpORT (12 > 14)

SR5105 Specific plate for MONOKEY® boxesMONOKEY® plate M5 in nylon included $ 158,00

SR5105M Specific plate for MONOLOCK® boxesMONOLOCK® plate M5M in nylon included $ 158,00

SRA5105 Specific plate in aluminium for Monokey® casesmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case $ 199,00

D5105ST Transparent screen composed of three pieces - main screen-blade and two hand protectors. 28.9 x 28.7 in (H x W)to be mounted instead of the original screen / 4.7 inches higher than original $ 275,00


C 650 GT (12 > 14)

PL5106 Tubular pannier holder for MONOKEY® boxesis mounted in conjuction with SRA5106 / maximum load allowed 6 Kg for pannier $ 229,00

D5106ST Transparent screen composed of three pieces - main screen-blade and two hand protectors. 31.8 x 22.8 in (H x W)to be mounted instead of the original screen / 5.1 inches higher than original $ 275,00

F 650 CS (02 > 06)

SR682M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / maximum load allowed 8 Kg $ 140,00

F 650 GS (00 > 04)

639F Specific Monorack armsonly match the plates M2, M3, MM / compatible from august ’00 / it is not compatible with the original sidecase holder $ 83,00


D234S Specific screen, smoked 16H x 14W inches $ 106,00

Description price



F 650 GS (05 > 07) / G 650 GS (08 > 11)

SR685 Specific rear rack for MONOKEY® top case $ 109,00


D331ST Specific screen, clear 16.75H x 17.5W inches6.1 inches higher than original / not mounted with original guards $ 138,00

F 650 GS / F 800 GS (08 > 14)

E194 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / Is compatible with the rear plate / only for F 650 GS / F 800 GS (08-11) $ 117,00

SRA5103 Specific plate in aluminium for Monokey® casesmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / Can not be mounted with art. PL690

$ 169,00

SR5107 Special rack for MONOKEY® boxesMONOKEY® plate M5 in nylon included / it is not compatible with the PL690 $ 120,00

PL690 Specific pannier holder for MONOKEY® side casesit can be mounted only with the specific plate E194 or E194M / only for F650GS - F800GS (08-13) $ 233,00


PL5103CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter $ 275,00

333DT Specific screen, clear 17.3H x 18.1W inches10.24 inches higher than F650GS / 8.66 inches higher than F800GS $ 138,00


TN690 Specific engine guardwe recommend fitting by a qualified mechanic $ 233,00

TN5103 Specific engine guardwe recommend fitting by a qualified mechanic / only for F800GS (13) $ 250,00


ES5110 Specific support in aluminum and stainless steel to widen the surface support area of the original side stand $ 45,00

MG5103 Mudguard/specific ABS chain-cover, black colour $ TBD

F 700 GS (13 > 14)

SR5107 Special rack for MONOKEY® boxesMONOKEY® plate M5 in nylon included / it is not compatible with the PL690 $ 120,00


BF15 Specific flange for fitting the Tanklock tank bags $ 65,00

AF5107 Specific sliding wind-screen transparent, Airflow for BMW F700GS (13). Maximum height 20.8 in (4.7 in of extension) width 20 incomplete with specific fitting kit $ 250,00

5107DT Specific screen, transparent 19.6 x 19.2 in (H x W)to be combined with the specific D5107KIT fitting kit $ 135,00





MG5103 Mudguard/specific ABS chain-cover, black colour $ TBD

F 650 GS DAKAR (00 > 03)

639F Specific rear rack for MONOKEY® or MONOLOCK® top caseit is not compatible with the original sidecase holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM $ 83,00


F 650 ST (97 > 99)


D232S Specific screen, smoked 16.9H x 16.3W inches $ 106,00

Description price


APRI

LIA -

BMW

CAN

AM -

DUCA

TI

G 650 GS (12 > 14)

SR685 Specific plate for MONOKEY® cases $ 109,00

PL188 Tubular Sidecase holder for MONOKEY® cases $ 182,00

D5101ST Specific screen, clear 16.14H x 15.35W inches8.66 inches higher that the original $ 133,00


K75

E180 Specific rear rack for MONOKEY® top caseMONOKEY® plate included $ 102,00


F 800 GS ADVENTURE (13 > 14) SR5107

Special rack for MONOKEY® boxesMONOKEY® plate M5 in nylon included / it is not compatible with the PL690 $ 120,00

SRA5103 Specific plate in aluminium for Monokey® casesmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / Can not be mounted with art. PL690

$ 169,00

AF5107 Specific sliding wind-screen transparent, Airflow for BMW F700GS (13). Maximum height 20.8 in (4.7 in of extension) width 20 incomplete with specific fitting kit $ 250,00

D5110ST Specific screen, transparent 18.9 x 21.6 in (H x W)to be mounted instead of the original screen / 6.7 inches higher that the original $ 160,00

TNH5110OX Specific engine guard, stainless steelwe recommend fitting by a qualified mechanic / it protects the upper part of the radiators / mount with original engine guard $ TBD



F 800 GT (13 > 14) SR5109

Special rack for MONOKEY® boxesMONOKEY® plate M5 in nylon included $ 150,00




D5109S Specific screen, smoked 22.8 x 15.7 in (H x W)to be mounted instead of the original screen / 5.3 inches higher than original $ 120,00

F 800 R (11 > 14)

PLR693 Tubular pannier holder for MONOKEY® cases $ 243,00


F 800 S (06 > 10)

687FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M $ 94,00

PLX687 Specific pannier holder for V35 MONOKEY® SIDE cases $ 245,00

D332ST Specific screen, clear 17.7H x 12.6W inches6.7 inches higher than original F800S $ 134,00

F 800 ST (06 > 12)


D332ST

BMW F800S / F800ST (06 > 08)Specific screen, clear17.7H x 12.6W inches6.7 inches higher than original F800ST

$ 134,00

Description price



S 1000 RR (12 > 14) BF06 Specific metal flange for fitting the TankLock tank bags $ 17,00

D5104S Specific screen, smoked with logo GIVI-LCR Team 17.7 x 14.1 in (H x W)to be mounted instead of the original screen $ 189,00

K 100 (90)



K 1100 RS



R 1100 GS (94 > 04)




R 1100 RS (94 > 98)

E183 Specific rear rack for MONOKEY® top caseto fit to the original rack $ 96,00

R 1100 RT (96 > 00)


R 1100 S (98 > 06)

681F Specific rear rack for MONOKEY® or MONOLOCK® top caseis compatible with the original side case holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM $ 94,00

R 1150 GS (00 > 04)



D233S Specific screen, clear 19.1H x 14.4W inches $ 151,00

R 1150 R (01 > 04)

SR683Specific rear rack for MONOKEY® top caseMONOKEY® plate included / to be mounted only with the original side-case holder / maximum load allowed 6 Kg / it is not compatible with R850R Comfort

$ 173,00

R 1150 RT (01)


R 1150 RT (02 > 04)

E191 Specific rear rack for MONOKEY® top caseto fit to the original rack / MONOKEY® plate included $ 96,00

D241ST Specific screen, clear 18.9H x 20.1W inches $ 123,00

K 1200 GT (03 > 04)


Description price


APRI

LIA -

BMW

CAN

AM -

DUCA

TI

K 1200 GT/ K1300 GT (08 > 13)

SRA693Specific plate in aluminium for Monokey® casesit can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 191,00

K1200 RS (00 > 04)



R 1200 GS ADVENTURE (06 > 13)



$ 292,00

BF13 Specific flange for fitting the Tanklock tank bagsonly for R1200GS Adventure (’09-’13) $ 17,00

R 1200 GS (04 > 12)

SRA692Specific plate in aluminium for Monokey® casesit can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11

$ 292,00

SR689 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / in replacement of original rack / is compatible with the original side case holder $ 134,00

SR684 Specific rear rack for MONOKEY® top caseto fit to the original rack / maximum load allowed 6 Kg / MONOKEY® plate included / year ’04 - ’11 / it is compatible with the original sidecase $ 114,00




330DT Specific screen, clear 20.3H x 22.2W inches5.7 inches higher than original / adjustable as the original $ 163,00


AF330 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 21.3 inches (4.7 inches of extension) width 21.3 inches $ 265,00


BF07 Specific metal flange for fitting the TankLock tank bags - only year ’08 $ 17,00

BF06 Specific metal flange for fitting the TankLock tank bags - year ’09 - ’11 $ 17,00


R 1200 GS (13 > 14) SRA5108 Specific plate in aluminium for Monokey® cases

maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case $ 195,00

SR5108 Special rack for MONOKEY® boxesMONOKEY® plate M5 in nylon included $ 150,00

PL5108CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / you must move from there original position $ 275,00

PLR5108 Rapid release tubular side-case holder for MONOKEY® casesyou must move the indicators from their original position $ 249,00


5108DT Specific screen, transparent 21.6 x 17.5 in (H x W)to be combined with the specific D5108KIT fitting kit / 6.7 cm higher that the original $ 150,00

D5108KIT Strengthening kit for the 5108DT screen $ 45,00

D5108B Specific low and sports screen gloss black 19 x 13.9 in (H x W)to be mounted instead of the original screen $ 120,00

TN5108OX Specific engine guard, stainless steelwe recommend fitting by a qualified mechanic $ 375,00

TNH5108OXSpecific engine guard, stainless steelwe recommend fitting by a qualified mechanic / it protects the upper part of the radiators / mount with TN5108OX - TN5108 or with original optional engine guard

$ 315,00


Description price



TNH5108 Specific engine guardwe recommend fitting by a qualified mechanic / it protects the upper part of the radiators / mount with TN5108OX - TN5108 or with original optional engine guard $ 275,00


PH5108 Specific para-cylinder anodized aluminum $ TBD


XS315 Tool case pockets designed specific to the new BMW R1200GS (13) $ 89,00

R 1200 R (06 > 10)

688FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / it is not compatible with the original sidecase holder / including fixing kit $ 101,00

PLX688KIT Specific kit to install the PLX688 without the specific rear rack 688FZ $ 42,00

147A Specific screen, clear 19.5H x 18.1W inches $ 150,00


R 1200 R (11 > 14)

SR5100 Specific plate for MONOKEY® boxesmaximum load allowed 6 kg / MONOKEY® plate M5 in nylon included $ 170,00

PLXR5100 Rapid release tubular side-case holder for MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDECASES $ 275,00





R 1200 RT (05 > 14)


K 1200 S (05 > 08) / K 1300 S (09 > 14)

PLR692 Specific rapid release side case holder for MONOKEY® cases $ 243,00


K 1300 R (09 > 14)


$ 265,00

PLXR691 Specific rapid release side case holder for V35 MONOKEY® SIDE casesyou must move the indicators from their original position $ 243,00

CAN AMSpYDER 990 (08 > 09)

PLX770 Specific pannier holder for V35 MONOKEY® SIDE casesyou must move the indicators from their original position $ 234,00


Description price


APRI

LIA -

BMW

CAN

AM -

DUCA

TI

DUCATIMONSTER 696 / MONSTER 1100 (08 > 13)

780FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / maximum load allowed 6 kg $ 94,00

A780 Specific screen, smoked 13.4H X 15.7W inchesincluding fixing kit $ 201,00

T681 Specific holder for soft side bags $ 133,00

7400KIT Specific kit to install the TE7400 and the T681 without the Monorack $ 64,00


MONSTER S2R / S4R / S4RS 800 - 1000 (04 > 08)



MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 05)

SR310 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / maximum load allowed 10 Kg $ 145,00

MULTISTRADA 620 / MULTISTRADA 1100 (06 > 09)

SR311 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / maximum load allowed 10 Kg $ 178,00

hIpERSTRADA 821 (13 > 14) SRA7403 Specific plate in aluminium for Monokey® cases

maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case $ 195,00

848 - 1098 - 1198 (07 > 09)


MONSTER 1100 EVO (11 > 13)


A780 Specific screen, smoked 13.4H X 15.7W inchesincluding fixing kit / it is necessary to remove the small original screen $ 201,00

TE7400 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggagecan be mounted without the Monorack using the 7400KIT / you must move the indicators from their original position $ 130,00

7400KIT Specific kit to install the TE7400 and the T681 without the Monorack $ 64,00


STREETFIGhTER 1098 (09 > 12)


A781A Specific fitting kit for 247N $ 64,00

MULTISTRADA (10 > 14)

SRA7401 Specific plate in aluminium for MONOKEY® casesmaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case $ 199,00

SR312 Specific plate for MONOKEY® boxesMONOKEY® plate M5 in nylon included / is compatible with the original side case holder $ 159,00


PLXR312 Rapid release tubular side-case holder for MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDECASES $ 243,00

Description price



D7401ST Specific screen, transparent 22 x 16.5 in (H x W)to be mounted instead of the original screen / only years ’13-’14 $ 149,00

D7401NO Specific screen, matt black 13.7 x 11 in (H x W)to be mounted instead of the original screen $ 110,00

D272ST Specific screen, transparent 23.6H x 18.5W inches3.5 inches higher than original $ 148,00




HONDARUCKUS 50 (04 > 13)


128A Specific screen, clear 29.1H x 26.4W3.1 inches higher than 105A $ 123,00



pCX 125 (10 > 12) / pCX 150 (13 > 14)

E231 Specific rear plate for MONOLOCK® casemaximum load allowed 3 kg / use the plate included in the box / you must puncture the housing in arranged sections $ 53,00

D322ST Specific screen, trasparent, 23.4H x 17.3W inches7.3 inches higher than original $ 101,00

D322S Specific screen, smoked, 23.4H x 17.3W inches7.3 inches higher than original $ 105,00

323DT Specific screen, clear, 32.3H x 22.8W inches16.1 in higher than original $ 186,00

D323KIT Specific fitting kit for 323DTDoes not fit PCX 150 $ 13,00


Sh 125I-150I (09 > 12)




A315A Specific fitting kit for 311A, 313A and 311ASP $ 53,00


CBR 250 R (11 > 14)

SR1103 Specific plate for MONOLOCK® boxesmaximum load allowed 6 kg / use the plate included in the box $ 133,00

CN 250 hELIX (89 > 00)


REFLEX 250 (01 > 08)


Description price


HOND

A

FORzA 300 (13 > 14) SR1123 Special rack for MONOKEY® boxes

MONOKEY® plate included / maximum load allowed 6 kg $ 110,00

SR1123MM Specific plate for MONOLOCK® boxesM6M MONOLOCK® plate with place for the “u” type padlock included $ 105,00

AF1123 Specific sliding wind-screen transparent. Maximum height 27.9 in (4.7 in of extension), width 22.8 into be mounted instead of the original screen $ 240,00


CB 500 F (13 > 14)SR1119 Specific plate for MONOLOCK® boxes

use the plate included in the box $ 135,00

PL1119 Tubular pannier holder for MONOKEY® boxesit can be mounted only with the specific rear rack SR1119 / you can only mount cases MONOKEY® E21 CRUISER and E22 $ 220,00

PLX1119 Tubular pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack SR1119 / you can mount only V35 MONOKEY® SIDE CASES $ 243,00

TE1119 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggageto be mounted only with SR1119 $ 130,00

CB 500 X (13 > 14)PLX1121 Tubular pannier holder for V35 MONOKEY® SIDE cases $ 243,00

PL1121CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it can be mounted without the specific rear rack 1121FZ using the 1121KIT $ 240,00




CBR 500 R (13 > 14)SR1119 Specific plate for MONOLOCK® boxes

use the plate included in the box $ 135,00


PLX1119 Tubular pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack SR1119 / you can mount only V35 MONOKEY® SIDE CASES $ 243,00

TE1119 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggageto be mounted only with SR1119 $ 130,00

D1119S Specific screen, smoked with logo GIVI-LCR Team. 13.7 x 12 in (H x W)to be mounted instead of the original screen $ 145,00


CB 599 (03 > 09)


A305 Specific screen, smoked 12.3H x 16.1W inchesincluding fixing kit / it can be installed without taking off the original light fairing / compatible from ’05 to ’06 $ 109,00

A258A * Specific fitting kit for 240A and 240N902compatible from ’03 to ’04 $ 51,00


CBR 600 F (97 > 98)

249F Specific rear rack for MONOKEY® or MONOLOCK® top caseTo be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM $ 101,00

CBR 600 RR (07 > 09)


SILVER WING 600 (01 > 13)

SR19 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / you must puncture the original case holder $ 96,00

Description price


HONDA

SR19M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / you must puncture the original case holder $ 96,00

214DT Specific screen, clear 24.8H x 23.6W inches $ 111,00


AF214 Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 22.4 inches (4.7 inches of extension) width 23.2 inches $ 253,00

TB19 Specific backrestit can be mounted with the SR19 / SR19M $ 84,00

XL 600 V TRANSALp (89 > 93)




DN-01 (08 > 12)

265FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / maximum load allowed 6 Kg $ 115,00

PLX204 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 265FZ $ 234,00

D316S Specific screen, smoked 26H X 17.7W inches $ 148,00

NC 700 X (12 > 14)



PLX1111 Tubular pannier holder for V35 MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDE CASES $ 243,00


D1111ST Specific screen, clear 19.5H x 16.2W inches)6.5 inches higher than original $ 133,00

TE1111 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggagecan be mounted without the Monorack using the 1111KIT $ 127,00

1111KIT Specific kit to install the TE1111/PL1111/PLX1111 without the Monorack $ 42,00


MG1109 Mudguard/specific ABS chain-cover, black colour. Specific for Honda Integra 700 (12) / NC700X (12) / NC700S (12) $ 169,00

NT 700 DEAUVILLE (06 > 12)

E221 Specific rear plate for MONOKEY® caseMONOKEY® plate M5 in nylon included/ for fixing the original lid must be drilled $ 117,00

E221M Specific rear plate for MONOLOCK® caseMONOLOCK® plate M5M in nylon included/ for fixing the original lid must be drilled $ 117,00

D307ST Specific screen, transparent 19.29H x 18.31W inches3.54 inches higher than the original $ 106,00


VFR 750 F (90 > 93)


VFR 750 F (94 > 97)


Description price


HOND

A

VFR 800 (98 > 01)

257FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself $ 112,00

PL257 Specific pannier holder for MONOKEY® side casesit can be mounted only with the specific rear rack 257FZ $ 163,00


VFR 800 VTEC (02 > 11)

166FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / it is not compatible with the original sidecase holder / reinforced version $ 123,00



PLXR166 Specific rapid release side case holder for V35 MONOKEY® SIDE cases $ 243,00



CB 919 (02 > 08)




CBR 1000 F (89 > 92)


Y155 Specific rack for MONOKEY® top case and for two MONOKEY® side casesTo be combined with the frame Wingrack N141 $ 111,00

CBR 1000 F (93 > 00)


Y155 Specific wingrack fitting kitto be combined with the frame Wingrack N141 $ 111,00

CBR 1000 RR (08 > 09)


CB 1000 R (10 > 14)


A312A * Specific fitting kit for 247A and 247N $ 64,00

A1101A * Specific fitting kit for 247A and 247Ncompatible from ’11 $ 85,00





VTR 1000 F (97 > 04)


Description price


HONDA

CB 1100 (13 > 14) SR1118 Specific rear chromed rack for MONOLOCK® or MONOKEY® top case $ 270,00

CBR 1100 XX


Y158 Specific rack for MONOKEY® top case and for two MONOKEY® side casesTo be combined with the frame Wingrack N140 $ 122,00

DH196 Specific screen, smoked 16.8H x 24.4W inches $ 131,00

ST 1100



ST 1300 (02 > 13)

E215 Specific rear rack for MONOKEY® top caseto fit to the original rack / MONOKEY® plate included $ 92,00

VFR 1200 F (10 > 14) 267FZ

Specific Monorack armsonly match the plates M5, M7, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / is compatible with the original side case holder

$ 125,00

PLX209 Tubular pannier holder for V35 MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 267KIT $ 200,00

267KIT Specific kit to install the PLX without the Monorack $ 95,00

D321S Specific screen, smoked 15.7H x 15.7W inches5.5 inches higher than original $ 148,00


KAWASAKININjA 250 R (08 > 12)


D4107S Specific screen, smoked with logo GIVI-LCR 18.1H x 12.2W inches4.7 in higher than original $ 138,00



NINjA 300 (13 > 14) 4108FZ Specific Monorack arms

only match the plates M5, M7, M5M, M6M / maximum load allowed 6 Kg $ 123,00




D4108S Specific screen, smoked with logo GIVI-LCR Team 16.5 x 13.3 in (H x W)to be mounted instead of the original screen / 3.5 inches higher that the original $ 149,00

650R NINjA (05 > 08)

445FZ Specific Monorack armsmaximum load allowed 6 kg / only match the plate M5M $ 94,00

PLX445 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 445FZ / you must move the indicators from their original position $ 200,00

pietroambrosioni

Typewritten Text

pietroambrosioni

Typewritten Text

pietroambrosioni

Typewritten Text

Description price


KAWA

SAKI

- K

TMKY

MCO

- MOT

OGUZ

ZI



650R NINjA / ER-6N (09 > 11)

449FZSpecific rear rack for MONOKEY® or MONOLOCK® top caseto be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates / you need to remove the handle bar of the scooter to install it

$ 101,00

PLX449 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted without the specific rear rack 449FZ using the PLX449KIT / you must remove the original grabrails $ 234,00

PLX449KIT Specific kit to install the PLX449 without the specific rear rack 449FZ $ 105,00

A448A * Specific fitting kit for 247Nonly for 6N models $ 34,00




zX-6 (93 > 04)


KLR 650 (08 > 14)


E581M Specific rear plate for MONOLOCK® case $ 101,00


408D Specific screen, smoked 21.3H x 13.8W inches $ 112,00



VERSYS 650 (08 > 09)

447FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / including fixing kit $ 101,00

PL447 Specific pannier holder for MONOKEY® side casesit can be mounted without the specific rear rack 447FZ using the PLX447KIT / the indicators must be moved from original position $ 200,00

PLX447 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted without the specific rear rack 447FZ using the PLX447KIT / you must move the indicators from their original position $ 234,00

PLX447KIT Specific kit to install the PL447 / PLX447 without the specific rear rack 447FZ $ 29,00


VERSYS 650 (10 > 14)


PL4103CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it can be mounted without the specific rear rack 451FZ using the 4103KIT $ 230,00

4103KIT Specific kit to install the PL4103CAM without the Monorack $ 65,00

PLR450 Rapid release tubular side-case holder for MONOKEY® casescan be mounted without the Monorack using the 450KIT $ 243,00

PLXR450 Rapid release tubular side-case holder for MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 450KIT $ 243,00

450KIT Specific kit to install the PLR and the PLXR without the Monorack $ 80,00

D410ST Specific screen, transparent 18.9H x 14.6W inches8.3 inches higher than original $ 127,00


Description price


KAWASAKI - KTMKYMCO - MOTOGUZZI




zR 7 (99 > 04)


z 750 S (05 > 06)


z 750 (07 > 12)

448FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position $ 123,00

A446 Specific screen, smoked 13.4 H X 13.4W inchesincluding fixing kit $ 148,00

TE265 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggagecan be mounted without the Monorack using the T265KIT / you must move the indicators from their original position $ 130,00

T265KIT Specific kit to install the TE265 without the specific rear rack 448FZ $ 45,00


W 800 (12 > 13) SR4101 Specific plate $ 150,00


NINjA 1000 (11 > 14)

4100FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / it is not compatible with the original sidecase holder $ 123,00



4100D Specific screen, smoked 22H x 14.57W inches5.51 inches higher than original $ 148,00




z 1000 (03 > 06)


A446 Specific screen, smoked 13.4 H X 13.4W inchesincluding fixing kit $ 148,00

z 1000 (07 > 08)

448FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position $ 123,00

z 1000 (10 > 13)


A449 Specific screen, smoked 16.5H x 14.2W inchesincluding fixing kit $ 201,00

T267 Tubular side holder for soft luggagecan be mounted without the Monorack using the T267KIT $ 99,00

Description price


KAWA

SAKI

- K

TMKY

MCO

- MOT

OGUZ

ZI

T267KIT Specific fitting kit for tubular holder $ 53,00


CONCOURS zG 1000 (86 > 06)

E128 Specific rear plate $ 95,00

zRX 1100 / zRX 1100 S (97 > 01)

433F Specific rear rack for MONOKEY® or MONOLOCK® top caseTo be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM / maximum load allowed 6 Kg $ 94,00

D174S Specific screen, smoked 14.3H x 12.6W inchesfor faired version $ 105,00

zX-11 (93 > 01)


zzR 1200 (02 > 04)

441FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself $ 94,00


zRX 1200 (02)


zRX 1200 R (02)


D174S Specific screen, smoked 14.3H x 12.6W inchesfor faired version $ 105,00

CONCOURS 1400 (08 > 14)

SR410 Specific rear rack for MONOKEY® top caseMONOKEY® plate included $ 140,00


zX 14 (06 > 09)


KTM690 (13 > 14)

245A Universal screen, smoked 13.1x 11.4 in (H x W)to be combined with the specific A7702A fitting kit $ 84,00

245A Universal screen, smoked 13.1x 11.4 in (H x W)to be combined with the specific A7702A fitting kit $ 84,00

A7702A Specific fitting kit $ 40,00

ADVENTURE 950 / 990 (03 > 11)

E650M Specific rear plate for MONOLOCK® caseto be combined with the plate already included in the MONOLOCK® top case $ 32,00

SR7700 Specific plate for MONOKEY® boxesmaximum load allowed 6 kg / MONOKEY® plate M5 in nylon included $ 127,00

Description price


KAWASAKI - KTMKYMCO - MOTOGUZZI



990 SMT (09 > 10)

D750S Specific screen, fumè 19.3H x 16.1W inches6.7 inches higher than original $ 148,00

PLR750 Tubular Sidecase holder for MONOKEY® cases $ 243,00

1190 ADVENTURE / ADVENTURE R (13 > 14) SR7703 Special rack for MONOKEY® boxes

MONOKEY® plate M5 in nylon included $ 130,00

SRA7703 Specific plate in aluminium for Monokey® casesmaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case $ 199,00



AF7703 Specific sliding wind-screen transparent. Maximum height 25.1 in (4.7 in of extension), width 16.1 into be mounted instead of the original screen $ 240,00

D7703ST Specific screen, trasparent, 14.5 x 16.1 in (H x W)to be mounted instead of the original screen / 6.7 inches higher than original $ 149,00

TN7703 Specific engine guardwe recommend fitting by a qualified mechanic / only for 1190 Adventure $ 299,00



KYMCOAGILITY 50-125-150 (08 > 12)



LIKE 50-125-200I (09 > 12)

6102A Specific screen, clear, 20.5H x 26.2W inches $ 119,00


YAGER 50-125-200I (06 > 12)

SR90 Specific plate for MONOLOCK® boxes $ 95,00

292DT Specific screen, clear, 26.4H x 22.8W inches14.6 in higher the original $ 106,00


pEOpLE 125-200-300 (10 > 12)

443A Specific screeen, clear20.8H x 28.4W inches $ 111,00


B&W 150 (00 > 06)



Description price


KAWA

SAKI

- K

TMKY

MCO

- MOT

OGUZ

ZI

GRAND VISTA 250 (00 > 07)



DOWNTOWN 300I (09 > 12)

SR92 Specific plate for MONOKEY® boxesMONOKEY® plate M5 in nylon included / maximum load allowed 6 kg $ 138,00

SR92M Specific plate for MONOLOCK® boxesmaximum load allowed 6 kg $ 74,00


TB82 Specific backrestit cannot be mounted if rack and case are installed $ 90,00

XCITING 250-500 (05 > 12)

SR89M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included $ 109,00

D295ST Specific screen, transparent 33.6 x 26 in (H x W)to be mounted instead of the original screen / 9.8 cm higher than original $ 185,00


TB80 Specific backrestit cannot be mounted if rack and case are installed $ 84,00

700I (13 > 14) SR6100 Specific plate for MONOKEY® boxes


SR6100M Specific plate for MONOLOCK® boxesMONOLOCK® plate M5M in nylon included $ 110,00

MOTOGUZZIBREVA 750 (03 > 12)


BREVA 1100 (05 > 10)

SR210 Specific rear rack for MONOKEY® top caseis compatible with the original side case holder / MONOKEY® plate included $ 116,00

SR210M Specific rear rack for MONOLOCK® top caseis compatible with the original side case holder / MONOLOCK® plate included $ 116,00

NORGE 1200 (06 > 14)

SR210 Specific rear rack for MONOKEY® top caseis compatible with the original side case holder / MONOKEY® plate included $ 116,00

SR210M Specific rear rack for MONOLOCK® top caseis compatible with the original side case holder / MONOLOCK® plate included $ 116,00

STELVIO 1200 (08 > 14)


E708M Specific rear plate for MONOLOCK® caseMONOLOCK® plate included $ 117,00

D610ST Specific screen, clear 24H x 18.1W inches5.1 inches higher than original $ 159,00

Description price


PIAGGIOFLY 50-125 (04 > 11)


107A Specific screen, clear 20H x 26W inches $ 106,00


VESpA LX (05 > 11)




BEVERLY (BV) 250-300 (04 >12)

E341 Specific rear plate for MONOLOCK® casemaximum load allowed 6 kg / only for ’04 version $ 45,00

E344 Specific rear plate for MONOLOCK® casemaximum load allowed 6 kg / compatible from model ’05 $ 58,00

105A Specific screen, clear, 26H x 26.4W inchesonly for ’04 version / only available if article A108A is already fitted $ 89,00

128A Specific screen, clear, 29.1H x 26.4W inches3.1 inches higher than 105A / only for ’04 version / only available if article A108A is already fitted $ 123,00

A350A Specific fitting kit for 113A, 113AS and 114AScompatible from model ’05 / only available if articles 113A, 1134AS, 113ASP are already fitted $ 55,00

Mp3 250-400 (06 > 11)

SR134“Folding” specific rear rack for MONOKEY® top caseMONOKEY® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

$ 254,00

SR134M “Folding” specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk $ 233,00

SR108 Specific rear rack for MONOKEY® top casecomplete with polyurethane backrest / MONOKEY® plate included / in order to fix you must remove the original backrest / maximum load allowed 6 kg $ 190,00

SR108M Specific rear rack for MONOLOCK® top casecomplete with polyurethane backrest / MONOLOCK® plate included / in order to fix you must remove the original backrest $ 190,00

D501ST Specific screen, clear 32.3H x 25.2W inches15.7 inches higher than original (06-08 Model) / 9.4 inches higher than original (09 Model) $ 190,00




VESpA GTS 250 (06 > 11)



VESpA GTS 300 SUpER (11 > 13)




BEVERLY 350 TOURER (12 > 13)

E349 Specific rear plate for MONOLOCK® casemaximum load allowed 3 kg / use the plate included in the box $ 69,00

PIAGGIO - SUZUKI

Description price


PIAG

GIO

- SUZ

UKI

357A Specific screen, clear, 12.6H x 18.1W inches $ 49,00


358A Specific screen, clear19.1H x 28H inches $ 95,00


5606A Specific screen, clear 18.5 x 28.3 in (H x W) $ 99,00



BEVERLY (BV) 500 (03 > 12)

E341 Specific rear plate for MONOLOCK® casemaximum load allowed 6 kg / compatible with ’03 and ’04 $ 45,00

E344 Specific rear plate for MONOLOCK® casemaximum load allowed 6 kg / compatible from ’05 $ 58,00





Mp3 500 (07 > 12)

E710 Specific rear plate for MONOKEY® caseMONOKEY® plate in aluminium included $ 100,00

E710M Specific rear plate for MONOLOCK® case $ 100,00

340D Specific screen, smoked 25.25H x 21.25W inches $ 175,00


X9 500 (05 > 08)

SR54 Specific rear rack for MONOKEY® top caseMONOKEY® plate included $ 149,00

SR54M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate MM in nylon included $ 149,00

SUZUKIAN 400 BURGMAN TYpE-S (05 > 06)

D258ST Specific screen, clear 31.5H x 28W inches $ 170,00

AN 400 BURGMAN (03 > 06)

SR115 Specific plate for MONOKEY® casesMONOKEY® plate M5 in nylon included $ 114,00

D258ST Specific screen, clear 31.5H x 28W inches $ 170,00

AN 400 BURGMAN (11 > 14)

E531 Specific rear plate for MONOKEY® caseMONOKEY® plate M5 in nylon included/ it is neccesary to puncture the housing behind the saddle $ 118,00

E531M Specific rear plate for MONOLOCK® caseMONOLOCK® plate M5M in nylon included/ it is neccesary to puncture the housing behind the saddle $ 118,00



Description price


PIAGGIO - SUZUKI


TB531 Specific backrestit can be mounted with E531M $ 78,00

GS 500 E (97 > 00)


GS 500 E (01 > 04)


GSF 600 BANDIT (96 > 99)


GSF 600 BANDIT (00 > 04)



D252S Specific screen, smoked 17.6H x 15.6W inchesonly for faired version $ 113,00

GSX 600 KATANA (03 > 06)


BURGMAN 650 / BURGMAN 650 EXECUTIVE (02 > 12)

E529 Specific rear rack for MONOKEY® top casethe rack cannot be mounted in conjunction with the TB529 / MONOKEY® plate included / in order to fix you must remove the original backrest $ 105,00

E529MSpecific rear plate for MONOLOCK® casethe rack cannot be mounted in conjunction with the TB529 / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest

$ 105,00

D257ST Specific screen, clear 31.5H x 28.3W inchescompatible with all years ’04 $ 162,00

D263ST Specific screen, clear 30.9H x 28.3W inchesfor models having electrically adjustable screen / compatible from ’05 $ 173,00

BURGMAN 650 / 650 EXECUTIVE (13 > 14) SR3104 Special rack for MONOKEY® boxes


SR3104MM Specific plate for MONOLOCK® boxesM6M MONOLOCK® plate with place for the “u” type padlock included $ 110,00


D3104ST Specific screen, trasparent, 29.9 x 29.5 in (H x W)to be mounted instead of the original screen / 4.7 inches higher than original $ 199,00

DL 650 V-STROM (04 > 11)



PLR532 Specific rapid release side case holder for MONOKEY® cases $ 243,00


D260ST Specific screen, clear 22.4H x 18.9W inches7.09 inches higher than the original $ 133,00

AF260 Specific sliding wind-screen, transparent, complete with fitting kit.Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches $ 265,00



Description price


PIAG

GIO

- SUZ

UKI

DL 650 V-STROM L2 (12 > 14)

SR3101 Specific plate for MONOKEY® boxesmaximum load allowed 6 kg / MONOKEY® plate E250 in nylon included $ 117,00

SR3101M Specific plate for MONOLOCK® boxesmaximum load allowed 3 kg / use the plate included in the box $ 80,00

SRA3101 Specific plate in aluminium for Monokey® cases, blackmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case $ 159,00



PLX3101 Tubular pannier holder for V35 MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDE CASES $ 211,00


AF3101 Specific sliding wind-screen, clear, complete with fitting kit. Maximum height inches (4.7 inches of extension) width 16.9 inches $ 239,00




TN3101 Specific engine guardCompatible with the original tip, as well as the oil carter protector RP3101 / we recommend fitting by a qualified mechanic $ 200,00


MG3101 Mudguard/specific ABS chain-cover, black colour $ 169,00



GLADIUS 650 (09 > 14)

SR121 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg $ 130,00

SR121M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / you must remove the grabrails, they are reproduced by the rack itself $ 130,00


A172 Specific screen, fumè 11.6 x 12W inchesincluding fixing kit $ 159,00

A172S Specific screen, black and grey 11.6H x 12W inchesincluding fixing kit $ 179,00


GSX 650F (08 > 12)


PL539 Specific pannier holder for MONOKEY® side casesyou must move the indicators from their original position $ 200,00




SV 650 / SV 650 S (99 > 02)

521FL Specific rear rack for MONOKEY® top caseto be combined with the plate MONOKEY® M35 $ 94,00

SV 650 / SV 650 S (03 > 08)


Description price


PIAGGIO - SUZUKI

DL 1000 V-STROM (02 > 12)




D255ST Specific screen, clear 23.6H x 14.8W inchesonly with spoiler / 6.3 inches higher than original / compatible from ’02 to ’03 $ 109,00

D260ST Specific screen, clear22.4H x 18.9W inches7.09 inches higher than original / only with spoiler / compatible for all years ’04

$ 133,00

AF260 Specific sliding wind-screen, transparent, complete with fitting kit.Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches $ 265,00



SV 1000 / SV 1000 S (03 > 08)


GSF 1200 BANDIT (96 > 99)


GSF 1200 BANDIT / BANDIT S (00 > 05)


PL523 Specific pannier holder for MONOKEY® side casesYou must move from there original position $ 220,00

D252S Specific screen, smoked 17.6H x 15.6W inchesonly for faired version $ 113,00

GSF 1250 BANDIT (07 > 12)


PL539 Specific pannier holder for MONOKEY® side casesyou must move the indicators from their original position $ 200,00


D262S Specific screen, smoked 18H x 14.4W inches $ 145,00

GSX 1300 hAYABUSA (08 > 10)

541FZ Specific Monorack armsonly match the plates M5, M7, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / maximum load allowed 6 Kg

$ 101,00

SYMFIDDLE II 50-125 (09 > 10)

293A Specific screen, transparent, 19.7H x 24.8W inches $ 101,00


CITYCOM 300 (08 > 13)

SR231 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / you must puncture the housing in arranged sections $ 170,00

SR231M Specific rear rack for MONOLOCK® top caseyou must puncture the housing in arranged sections / MONOLOCK® plate included $ 127,00


Description price


SYM

- TR

IUMP

H

jOYMAX EVO 300 (09)


TRIUMPHSTREET TRIpLE 675 (07 > 12)





BONNEVILLE 865

SR226 Specific plate for MONOLOCK® boxes $ 270,00

TIGER 800 / TIGER 800 XC (11 > 14)

SR6401 Specific rear rack for MONOKEY® top casemaximum load allowed 6 kg / MONOKEY® plate included / it is necessary to puncture the housing behind the saddle $ 134,00

SRA6401 Specific plate in aluminium for Monokey® casesmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / you must puncture the housing in arranged sections

$ 265,00



6401DT Specific screen, clear 20.86H x 18.30W inches6.7 inches higher than original $ 148,00


AF6401 Specific sliding wind-screen clear, complete with fitting kit. Maximum height 23.8 (4.7 inches extension) width 17.9 inches $ 265,00


TN6401A Specific engine guardonly for ’12-’13 version / we recommend fitting by a qualified mechanic $ 225,00



TIGER 1050 (07 > 13)

SR225 Specific rear rack for MONOKEY® top caseMONOKEY® plate included / maximum load allowed 6 Kg / it is not compatible with the original sidecase holder $ 134,00

PL727 Specific pannier holder for MONOKEY® side casesit can be mounted only with the specific rear rack SR225 $ 190,00


T704 Specific holder for soft side bagsit can be mounted without the specific rear rack SR225 using the T700KIT $ 122,00

T700KIT Specific kit to install the T704 without the specific rear rack SR225 $ 53,00



Description price


SYM - TRIUMPH

SpEED TRIpLE 1050 (05 > 09)

T702 Tubular side holder for soft luggage for models from ’08 $ 117,00


SpRINT GT 1050 (10 > 13)

SRA227 Specific plate in aluminium for Monokey® cases, blackit can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 265,00

D6400S Specific screen, smoked 19.5H x 15.2W incincluding the kit to specific attachments $ 148,00


ST 1050 SpRINT (05 > 11)



TIGER EXpLORER 1200 (12 > 14)





D6403ST Specific screen, clear 20.1H x 17.7W inches2 inches higher that the original $ 148,00

AF6403 Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 21.7 in (4.7 in of extension) width 17.7 in $ 239,00



YAMAHAMAjESTY 400 (04 > 14)


E331M Specific rear plate for MONOLOCK® caseMONOLOCK® plate included $ 114,00


TB47 Specific backrestit can be mounted only if rack and case are installed $ 73,00

TB48 Specific backrestit cannot be mounted if rack and case are installed / compatible from ’04 to ’06 $ 73,00

T-MAX 500 (08 > 11)

SR364 Specific rear rack for MONOKEY® top casemaximum load allowed 6 kg / MONOKEY® plate included / it is necessary to puncture the housing behind the saddle $ 191,00

SR364M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle $ 191,00

SR369 Specific rear rack for MONOKEY® top caseCan not be mounted with art. TB52 or T273 / MONOKEY® plate included / maximum load allowed 5 Kg / It is necessary to drill the tail fairing of the scooter in the indicated points to mount it

$ 170,00

SR369M Specific rear rack for MONOLOCK® top caseMONOLOCK® plate included / it is necessary to drill the tail fairing of the scooter in the indicated points to mount it / maximum load allowed 5 Kg / Can not be mounted with art. TB52 or T273

$ 170,00

D442B Specific screen, black 23.23H x 17.72W inches $ 164,00

Description price


YAMA

HA


AF442 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 35.4 inches (4.7 inches of extension) width 22.8 inches $ 285,00

T273 Specific holder for soft side bagsit is not compatible with the specific rear rack SR2013 / SR2013M / SRA2013 $ 106,00

Fz-6 (04 > 06)


PL351 Specific pannier holder for MONOKEY® side casesit can be mounted without the specific rear rack 351FZ using the 351KIT / the indicators must be moved from original position $ 190,00

PLX351 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 351FZ / you must move the indicators from their original position $ 200,00

351KIT Specific kit to install the PL351 without the Monorack $ 40,00

D136ST Specific screen, clear 24H x 21.1W inches4.9 inches higher than original $ 139,00

TN358 Specific engine guardwe recommend fitting by a qualified mechanic / mount with original central tripod mounted $ 184,00


Fz-6 (07 > 10)


PL360 Specific pannier holder for MONOKEY® side casesit can be mounted without the specific rear rack 351FZ using the 351KIT / the indicators must be moved from original position $ 200,00

PLX360 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted without the specific rear rack 351FZ using the 351KIT / you must move the indicators from their original position $ 200,00

440D Specific screen, clear 22.44H x 22.44W inches7.48 inches higher than the original / for faired version $ 158,00

D440KIT Specific fitting kit for 440Dfor faired version $ 22,00

TN358 Specific engine guardwe recommend fitting by a qualified mechanic / mount with original central tripod mounted $ 184,00


351KIT Specific kit to install the PL360, PLX360 and TE351 without the Monorack $ 40,00


Fz-6R (09 > 14)


PLXR364 Specific rapid release side case holder for V35 MONOKEY® SIDE cases $ 243,00

D444S Specific screen, smoked 16.7H x 14.9W inches3.9 inches higher than original $ 148,00



YzF 600 R6 (06 > 07)


Fz-8 (11 > 14)


SR2100 Specific plate for MONOKEY® boxesmaximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company

$ 159,00


Description price


YAMAHA


A287 Specific screen, smoked 11H x 11.8W inchesincluding fixing kit / not for faired version $ 170,00

A287N Specific screen, black 11H x 11.8W inchesincluding fixing kit / not for faired version $ 191,00


TE366 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggagecan be mounted without the 366FZ Monorack using the 366KIT $ 127,00


Fz-1 (01 > 05)



D129S Specific screen, smoked 16.9H x 13W inches $ 108,00

Fz-1 (06 > 14)

365FZ Specific Monorack armswe recommend mounting smaller cases MONOLOCK® in conjunction with M5M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg $ 112,00

PLX359 Tubular pannier holder for V35 MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDECASES / you must move the indicators from their original position / can be mounted without the Monorack using the 365KIT

$ 228,00

PLXR359 Tubular pannier holder for V35 MONOKEY® SIDE casesyou must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT

$ 245,00

365KIT Specific kit to install the PLX and the PLXR without the Monorack $ 32,00


T271 Specific holder for soft side bagsit is not compatible with the specific rear rack 365FZ $ 73,00


YzF R1 1000 (04 > 06)


V-MAX 1200

A123 Specific screen, smoked 12.25H x 11.6W inches $ 140,00

XTz 1200 (11 > 13)

SRA2101 Specific plate in aluminium for Monokey® casesit can be fit with the original side-case / to open the original side -cases you ought to remove the back top case from the plate / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

$ 159,00

SR371 Specific plate for MONOKEY® boxesMONOKEY® plate M5 in nylon included / is compatible with the original side case holder / to open the original side -cases you ought to remove the back top case from the plate

$ 122,00




AF447 Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 24 inches (4.7 inches of extension), width 16.9 inches $ 265,00



Description price


YAMA

HA

FjR 1300 (01 > 05)

SR346 Specific rear rack for MONOKEY® top caseis compatible with the original side case holder / MONOKEY® plate included / maximum load allowed 6 Kg $ 173,00

D134ST Specific screen, clear 18.5H x 20.1W2 inches higher than the original $ 109,00

FjR 1300 (06 > 12)

SR357 Specific rear rack for MONOKEY® top case $ 159,00


E228 Specific rear rack for MONOKEY® top caseMaximum load 6 Kg. / MONOKEY® plate included $ 117,00

E228M Specific rear plate for MONOLOCK® caseMaximum load 6 Kg. / MONOLOCK® plate included $ 117,00

PLX357 Tubular pannier holder for V35 MONOKEY® SIDE casesyou can mount only V35 MONOKEY® SIDECASES / to be mounted only the specific side-case $ 211,00

D436ST Specific screen, clear 20.5H x 19.5W inches2 inches higher than the original $ 134,00


FjR 1300 (13 > 14) SRA2109

Specific plate in aluminium for Monokey® casesmaximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case $ 180,00

SR357 Specific plate for MONOKEY® cases $ 159,00

E228 Specific rear plate for MONOKEY® caseMaximum load 6 Kg. / Complete with M5 Monokey plate $ 117,00

E228M Specific rear plate for MONOLOCK® caseMaximum load 6 Kg. / Complete with M5M Monolock plate $ 117,00

D2109ST Specific screen, transparent 21.7 x 20.8 in (H x W)to be mounted instead of the original screen $ 160,00

TN2109OX Specific engine guard, stainless steelwe recommend fitting by a qualified mechanic $ 200,00


102 s = Item available until it runs out of stock

SPARE PARTS

KEy LOCKS SECURITy LOCK

KEY SET “SECURITY LOCK”

1 SL101

Security Lock key, including bush and under lock platelets, compatible with OBK37A_ - OBK48A_ - TRK52N - TRK33N - TRK46N - V35 - V35NT - V47 - V47NT - V46 - V46NT - E470 - E450 - E370 - E370NT - E340 - E300N2 - E260 - B36N - B47 - B47NT - B37 - B37NT - B33NMK - B33NML

$ 19,00

KEY SET “SECURITY LOCK” (FOR 2 CASES)

2 SL102

Security Lock key set for 2 cases, including bush and under lock platelets, compatible with OBK37A_ - OBK48A_ - TRK52N - TRK33N - TRK46N - V35 - V35NT - V47 - V47NT - V46 - V46NT - E470 - E450 - E370 - E370NT - E340 - E300N2 - E260 - B36N - B47 - B47NT - B37 - B37NT - B33NMK - B33NML

$ 38,00

KEY SET “SECURITY LOCK” (FOR 3 CASES)

3 SL103

Security Lock key set for 3 cases, including bush and under lock platelets, compatible with OBK37A_ - OBK48A_ - TRK52N - TRK33N - TRK46N - V35 - V35NT - V47 - V47NT - V46 - V46NT - E470 - E450 - E370 - E370NT - E340 - E300N2 - E260 - B36N - B47 - B47NT - B37 - B37NT - B33NMK - B33NML

$ 57,00

- STANDARD FOR THE FOLLOWING CASES:Trekker Outback - E55 Maxia 3 - Trekker 33/46/52 - V35 - V47 - V46.

- AVAILABLE AS OPTIONAL FOR THE FOLLOWING CASES:E470 Simply III - E450 Simply II - E370 - E340 Vision - E300N2 - E260 - E230 - B36N - B47 Blade - B37 Blade - B33NMK - B33NML.

- NOT COMPATIBLE WITH THE FOLLOWING CASES:E55 Maxia 3 (2008-2012) - E52 Maxia - E41 Keyless - E360 - E460 - E21 Cruiser - E36 - E45 - E300 - E300B - E30 Tour

103 SPAR

E PA

RTS


V35 / V35 TECH

1 Z1462R Elastic belt $ 14,002 Z115R Stop bag opening yarn, 2 pcs. $ 3,003 Z112R Red pulley, 4 pcs. $ 4,004 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,005 Z769 Black lock lining $ 8,006 Z1424R Top case reflector (right and left) $ 11,00

Z1424TR Top case reflector with silver bottom, right and left (for V35 TECH) $ 11,00

7 Z1426R Low cover (right and left) $ 32,009 Z109 Long bolt springs $ 2,0010 Z1404R Push button guide 1pcs. $ 3,0011 Z106 Bolt $ 11,0012 Z1405R Right and left visor mechanism $ 3,0013 Z645R Push button red, 1 pcs. $ 4,0014 Z661 Key locks with corresponding bush with red handle $ 11,00

15 Z641NR Hinge black $ 13,0016 Z721R Pin. D. 04x85 mm $ 2,0017 Z1384R Cylinder spring and steek spheres, 1 kit $ 2,0018 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z647R Torsion spring, 1 pcs. $ 2,0021 Z643R Lock set element red, 1 pcs. $ 5,0022 Z632R Steel torsion spring $ 2,0023 Z409R Name holder, 1 pcs. $ 2,0024 Z1387R Pair of rotational rear clamps $ 17,00

Z35FNMDX Right bottom-shell (mounted) $ 191,00Z35FNMSX Left bottom-shell (mounted) $ 191,00Z35CNMDX Right top-shell (mounted) $ 106,00Z35CNMSX Left top-shell (mounted) $ 106,00Z641NM2 Lock set $ 40,00

104

SPARE PARTS

THE ITALIAN SIGN OF MOTODESIGNs = Item available until it runs out of stock

ZTRK52CNM TRK52N top-shell $ 250,00ZTRK52FNM TRK52N bottom-shell black $ 160,00Z641N52M Hinge stop $ 40,00

4 Z2202R Black metal plate cover/cap $ 33,005 Z2211OXCR Alluminium cover with anodizing cover/cap $ 200,006 Z645CR Push button silver, 1 pcs. $ 5,007 Z1782CR Bolt $ 13,00

8 Z191R Push button spring, 1 pcs. $ 1,009 Z590R Pin. Medium, 2 pcs. $ 2,0010 Z3220R Trim $ 11,0011 Z2170R Elastic belt $ 13,0012 Z599 Nylon stop bag opening yarn $ 2,00

13 SL101 Security Lock key, including bush and under lock platelets $ 19,00

14 Z4513R Plate below lock for Security Lock key $ 3,00

TRK52N TREKKER

5

4

12

11

9

9

7 8

6

13

14

10

105 SPAR

E PA

RTS


TRK33N / TRK46N TREKKER

Z2073CNM TRK33N / TRK46N top-shell $ 250,00Z2061FNM TRK46N bottom-shell black $ 140,00Z2062FNM TRK33N bottom-shell black $ 120,00Z641N46M Hinge stop (for top case TRK46N) $ 40,00Z641N33M Hinge stop (for top case TRK33N) $ 40,00

6 Z2063R Black metal plate cover/cap and open lids $ 41,00

7 Z2070OXR Alluminium cover with anodizing cover/cap and open lids $ 220,00

8 Z2067R Double anchor with black washer $ 9,009 Z109 Bolt spring $ 2,0010 Z106 Case clamp attachment $ 11,0011 Z645CR Push button red, 1 pcs. $ 5,00

Z2106R Inner strap $ 11,00

13 Z115R Stop cords (sold as pair). $ 3,0014 Z2072R Trim $ 21,0015 Z409R Name holder, 1 pcs. $ 2,0016 Z630 Steel spheres D. 6 $ 2,0017 Z632R Steel torsion spring $ 2,00

Z590R Pin. Medium, 2 pcs. $ 2,0019 Z640R Lock latch $ 4,0020 Z643NR Lock set element black $ 5,0021 Z644NR Opening push button $ 5,00

Z647R Torsion spring, 1 pcs. $ 2,0023 Z648 Cylinder spring $ 2,0024 Z721R Pin. D. 04x85 mm $ 2,0025 Z661A Key for case lock $ 13,00

106

SPARE PARTS


E55 MAxIA 3 / E55 MAxIA 3 TECH

1 Z55CNM E55 Top Shell Black $ 191,002 Z55FNM E55 Bottom Shell Black $ 220,003 Z398NMR Hinge stop (for top case E55 MAXIA 3) $ 69,003 Z398NTMR Hinge stop (for top case E55NT TECH) $ 69,004 Z677R Latch System Cover $ 12,005 Z590R Pin. Medium, 2 pcs. $ 2,006 Z285 Inner strap $ 13,007 ZV55R Adhesive Givi Logo $ 4,008 Z696R Pair of side reflectors (for top case E55 MAXIA 3) $ 48,008 Z696FR Pair of side reflectors (for top case E55NT TECH) $ 48,009 Z694R Central reflector (for top case E55 MAXIA 3) $ 23,009 Z694FR Central reflector (for top case E55NT TECH) $ 23,00

10 Z1684R Pair of opening hinges $ 10,0011 Z160 Inner document holder $ 14,0012 Z692R Replacement back band (for top case E55 MAXIA 3) $ 25,0012 Z692N902R Replacement back band (for top case E55NT TECH) $ 28,0013 Z693R Pair of side bands (for top case E55 MAXIA 3) $ 74,0013 Z693N902R Pair of side bands (for top case E55NT TECH) $ 74,0014 Z1908R Trim $ 6,0015 Z1782R Bolt + Bolt Springs $ 8,0016 Z206R Button + Button Spring (for top case E55 MAXIA 3) $ 6,0016 Z206NR Button + Button Spring (for top case E55NT TECH) $ 5,0017 Z661 Key locks with corresponding bush with red handle $ 11,00

107 SPAR

E PA

RTS


E52 MAxIA 2

1 Z52CNM E52 top-shell, black $ 94,002 Z52FNM E52 bottom-shell, black $ 179,003 Z106 Bolt $ 11,004 Z109 Long bolt springs $ 2,005 Z115R Stop bag opening yarn, 2 pcs. $ 3,006 Z159R Bag lock lining, 1 pcs. $ 3,00

Z1237 Push button spring with washer $ 2,009 Z590R Pin. Medium, 2 pcs. $ 2,0010 Z206 Push button PRESS $ 4,0011 Z218N Black rear bend $ 17,0011 Z218VS Grey rear bend $ 15,0012 Z223 Red reflector $ 17,0013 Z276 Name holder $ 2,0014 Z286 Glass for small name plate $ 3,0015 Z339 Red pulley $ 1,0016 Z633 Spare elastic belt $ 12,0017 Z684C Satined trim (5 pcs.) $ 40,0018 Z129 MAXIA sticker (on top-shell) $ 4,0019 Z338 Pass belt clip $ 2,00

Z682N Lock set $ 59,0020 Z127 s Press plate mm 34,4x10,6 $ 2,0021 Z661 Key locks with corresponding bush with red handle $ 11,00

22 Z229 Chromed GIVI brand $ 4,0023 Z234A Acetalic latch (A) $ 3,0024 Z234B Acetalic latch (B) $ 3,0025 Z297 s Pin 140 mm $ 2,0026 Z367N Black handle $ 8,0027 Z368N Bottom black hinge with serigraphy $ 11,0028 Z611 Black nylon button $ 2,0029 Z612N Black nylon rod $ 3,0030 Z616KIT Reflecting red plate $ 3,0031 Z617 Upper reflecting red plate $ 4,0032 Z626 Withe screen for central handle $ 7,0033 Z628 Black lock plate $ 4,0034 Z630 Steel spheres D. 6 $ 2,0035 Z631 Zinc-plated cylindric steel spring $ 2,0036 Z632R Steel torsion spring $ 2,0037 Z634 Steel spring for rod $ 2,0038 Z721R Pin. D. 04x85 mm $ 2,0039 Z195 Pin D. 04x80 mm $ 2,0040 Z723 Pin. D. 04x23 mm $ 2,0041 Z613N Upper part lock set, black $ 5,0042 Z133 Steel sliding plate $ 5,0043 Z134 Handle plate $ 11,00

108

SPARE PARTS


V47 / V47 TECH

9

9

8

4

4

3

5

5

7

10

11

12

13

15

14

14

16

17

ZV47CNM V47 top-shell $ 150,00ZV47FNM V47 bottom-shell black $ 200,00

3 Z4706OXCR Alluminium cover with anodizing cover/cap $ 60,004 Z4703R Red reflectors with stop lamp holder (for V47) $ 24,005 Z4702R Red bottom frame with stop lamp holder (for V47) $ 17,00

Z3007NV47M Hinge stop $ 64,007 Z1983R Push button red $ 3,008 Z4701A900R Silver rear bend $ 36,009 Z590R Pin. Medium, 2 pcs. $ 2,00

10 Z106 Bolt $ 11,0011 Z109 Long bolt springs $ 2,0012 Z3012R Closure system mounted on the lid $ 6,0013 Z790R Trim $ 10,0014 Z115R Stop bag opening yarn, 2 pcs. $ 3,0015 Z285NEWR Elastic belt $ 14,00

16 SL101 Security Lock key, including bush and under lock platelets $ 19,00

17 Z4512R Plate below lock for Security Lock key $ 3,00

109 SPAR

E PA

RTS


V46 / V46 TECH

1 Z46CNM V46 top-shell with cover, black $ 117,002 Z46FNM V46 bottom-shell, black $ 163,003 Z106 Bolt $ 11,004 Z109 Long bolt springs $ 2,005 Z112R Red pulley, 4 pcs. $ 4,007 Z229 Chromed GIVI brand $ 4,008 Z285 Inner strap $ 13,009 Z599 Nylon stop bag opening yarn $ 2,0010 Z645R Push button red, 1 pcs. $ 4,00

11 Z731 Top case reflector (right and left, for top-case Monokey® V46) $ 15,00

11 Z731TR Top case reflector (right and left, for top-case Monokey® V46NT TECH) $ 15,00

12 Z732KIT Central top case reflector (for top-case Monokey® V46) $ 6,00

12 Z732TR Central top case reflector (for top-case Monokey® V46NT TECH) $ 6,00

13 Z734SET Central bend, rear bend and bend right and left, ABS silver A900 $ 39,00

14 Z737N Black handle $ 3,00

15 Z741 Hook for fixing the document holder $ 4,0017 ZV45 V35/V46 logo $ 4,0018 Z769 Black lock lining $ 8,00

Z641NM2 Lock set $ 40,00Z641NTM Lock set (for top case V46NT TECH) $ 28,00

19 Z409R Name holder, 1 pcs. $ 2,0020 Z630 Steel spheres D. 6 $ 2,0021 Z632R Steel torsion spring $ 2,0022 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0023 Z640R Plate below lock, 1 pcs. $ 4,0024 Z641NR Hinge black $ 13,0025 Z643R Lock set element red, 1 pcs. $ 5,0026 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,00

26 Z645CR Opening push button, 1 pcs. (for top case V46NT TECH) $ 5,00

27 Z647R Torsion spring, 1 pcs. $ 2,0028 Z648 Cylinder spring $ 2,0029 Z721R Pin. D. 04x85 mm $ 2,0030 Z661 Key locks with corresponding bush with red handle $ 11,00

110

SPARE PARTS


E460

1 Z460CNM E460 top-shell black $ 77,002 Z360FNM E460-E360 bottom-shell black $ 109,003 Z115R Stop bag opening yarn, 2 pcs. $ 3,004 Z159R Bag lock lining, 1 pcs. $ 3,005 Z828 Stop lamp holder $ 6,006 Z106 Bolt $ 11,007 Z109 Long bolt springs $ 2,008 Z112R Red pulley, 4 pcs. $ 4,009 Z140R Key locks with corresponding bush with red handle $ 11,0011 Z1237 Push button spring with washer $ 2,0013 Z195 Pin D. 04x80 mm $ 2,0014 Z200 GIVI logo Monokey® $ 5,0015 Z214 Top case reflector $ 21,0016 Z215N Rear band black $ 14,0017 Z217 Push button $ 6,00

18 Z220N s Handle cover black $ 5,0019 Z236 Hinge spring $ 2,0020 Z277 Plate below lock $ 4,0021 Z280 s Rear band plate $ 2,0022 Z285 Inner strap $ 13,0023 Z312 Hinge plate $ 3,0024 Z314N Hinge black $ 12,0025 Z829 Light holder (black) $ 8,0026 Z337 Top-case reflector $ 4,0027 Z362 Light seat chromed $ 5,0028 Z405 s Name holder $ 3,00

Z358 Circuit with lamps for version with stop light already mounted $ 20,00

Z155 Pass belt clip $ 2,00Z314NM Hinge black climbed on $ 24,00

E360

1 Z360CNM E360 top-shell black $ 71,002 Z360FNM E460-E360 bottom-shell black $ 109,003 Z115R Stop bag opening yarn, 2 pcs. $ 3,004 Z159R Bag lock lining, 1 pcs. $ 3,005 Z106 Bolt $ 11,006 Z109 Long bolt springs $ 2,007 Z112R Red pulley, 4 pcs. $ 4,008 Z140R Key locks with corresponding bush with red handle $ 11,0010 Z1237 Push button spring with washer $ 2,0012 Z195 Pin D. 04x80 mm $ 2,0013 Z200 GIVI logo Monokey® $ 5,00

14 Z214 Top case reflector $ 21,0015 Z215N Rear band black $ 14,0016 Z217 Push button $ 6,0017 Z220N s Handle cover black $ 5,0018 Z277 Plate below lock $ 4,0019 Z280 s Rear band plate $ 2,0020 Z285 Inner strap $ 13,0021 Z312 Hinge plate $ 3,0022 Z314N Hinge black $ 12,0023 Z405 s Name holder $ 3,00

Z155 Pass belt clip $ 2,00

111 SPAR

E PA

RTS


B33NMK / B33NML

6

6

7

8

8

10

1415

1617

17

18

19

13

12

5

ZB33CNM B33 top-shell black $ 100,00ZB33FNMLM B33NML Monolock bottom-shell black $ 140,00ZB33FNMKM B33NMK Monokey bottom-shell black $ 160,00Z3007NM Hinge stop $ 46,00

5 Z3012R Closure system mounted on the lid $ 6,006 Z3003R Top case reflector red $ 25,007 Z599 Nylon stop bag opening yarn $ 2,008 Z3001NR Bottom frame for B33NML Monolock $ 13,008 Z3001A900R Bottom frame for B33NMK Monokey, silver $ 30,0010 Z645R Push button red, 1 pcs. $ 4,00

10 Z1983R Push button red $ 3,0012 Z762NR Bolt, 1 pcs. $ 4,0013 Z191R Push button spring, 1 pcs. $ 1,0014 Z106 Bolt $ 11,0015 Z109 Long bolt springs $ 2,0016 Z790R Trim $ 10,0017 Z591R Pin. Medium, 2 pcs. $ 2,0018 Z140R Key locks with corresponding bush with red handle $ 11,0019 Z3006R Plate below lock $ 3,00

Z4512R Plate below lock for Security Lock key $ 3,00

112

SPARE PARTS


E41 KEyLESS

1 Z41CDXSM E41 Top -shell right, black $ 89,001 Z41CSXSM E41 Top-shell left, black $ 89,002 Z41FNM E41 bottom shell, black $ 116,003 Z599 Nylon stop bag opening yarn $ 2,004 Z106 Bolt $ 11,005 Z109 Long bolt springs $ 2,006 Z112R Red pulley, 4 pcs. $ 4,007 Z140R Key locks with corresponding bush with red handle $ 11,008 Z1237 Push button spring with washer $ 2,009 Z195 Pin D. 04x80 mm $ 2,0010 Z217 Push button $ 6,0011 Z236 Hinge spring $ 2,0012 Z277 Plate below lock $ 4,0013 Z285 Inner strap $ 13,0014 Z312 Hinge plate $ 3,00

15 Z314N Hinge black $ 12,0016 Z405 s Name holder $ 3,0017 Z1235 Injection covering cap $ 2,0018 Z548 Keyless logo $ 6,0019 Z590R Pin. Medium, 2 pcs. $ 2,0020 Z726 Black lock lining $ 5,0022 Z148M Mounted hinge (including combination) $ 28,0023 Z200 GIVI logo Monokey® $ 5,0024 Z539 Red hooks to fix lid, (1 pcs.) $ 2,0025 Z544 Caps (4 pcs.§) $ 7,0026 Z545 Keyless round medal chromed $ 6,0027 Z592 41 mm pin to fix the lid $ 2,0028 Z1239 Hinge plate in nylon $ 3,0029 Z1238 Nylon tooth catch mechanism $ 3,00

E21 CRUISER

1 Z21CNDXM E21 top-shell black (right) $ 53,00Z21CNSXM E21 top-shell black (left) $ 53,00Z21CNDXCM E21 top-shell black custom (right) $ 63,00Z21CNSXCM E21 top-shell black custom (left) $ 63,00

2 Z21FNM E21 bottom-shell black $ 50,00Z21FNCM s E21 bottom-shell black custom $ 65,00

3 Z109 Long bolt springs $ 2,004 Z159R Bag lock lining, 1 pcs. $ 3,005 Z200 GIVI logo Monokey® $ 5,006 Z200C Chromed GIVI logo Monokey® $ 6,00

7 Z325 Pannier opening sticker $ 2,008 Z363R s Chromed decoration (pair) $ 13,009 Z387 Bolt $ 3,0010 Z388 Push button $ 3,0011 Z389 Complete key lock plate $ 6,0012 Z390 Pin D. 02x60 mm E21 $ 3,0013 Z605 Handle $ 14,0014 Z606 Handle mounting set black $ 12,0016 Z831 s Spring push button $ 1,0017 Z140R Key locks with corresponding bush with red handle $ 11,00

113 SPAR

E PA

RTS


B47 BLADE / B47 BLADE TECH

15

8

10

16

18

20

11

13

14

17

17

8

8

8

7

ZB47CNM B47 Blade top-shell black $ 160,00ZB47CNTM B47 Blade Tech top-shell black $ 160,00ZB47FNM B47 Blade bottom-shell black $ 160,00ZB47FNTM B47 Blade Tech bottom-shell black $ 160,00Z3007NM Hinge stop $ 46,00Z3007NTM Hinge stop $ 46,00

7 Z3012R Closure system mounted on the lid $ 6,008 Z4506R Red reflectors with stop lamp holder (for B47 Blade) $ 72,00

8 Z4506FR Smoked reflectors with stop lamp holder (for B47 Blade Tech) $ 72,00

10 Z599 Nylon stop bag opening yarn $ 2,00

11 Z1983R Push button red $ 3,0011 Z645CR Push button silver, 1 pcs. $ 5,0013 Z761NR Bolt, 1 pcs. $ 4,0014 Z191R Push button spring, 1 pcs. $ 1,0015 Z4504AR Chromed Blade brand $ 9,0016 Z790R Trim $ 10,0017 Z590R Pin. Medium, 2 pcs. $ 2,0018 Z140R Key locks with corresponding bush with red handle $ 11,00

Z661A Key locks with corresponding bush with silver handle $ 13,0020 Z3006R Plate below lock $ 3,00


114

SPARE PARTS


B37 BLADE / B37 BLADE TECH

7

8

8

8

8

10

12

13

14

15

16

17

17

18

20

ZB37CNM B37 Blade top-shell black $ 140,00ZB37CNTM B37 Blade Tech top-shell black $ 140,00ZB37FNM B37 Blade bottom-shell black $ 130,00ZB37FNTM B37 Blade Tech bottom-shell black $ 130,00Z3007NM Hinge stop $ 46,00Z3007NTM Hinge stop $ 46,00

7 Z3012R Closure system mounted on the lid $ 6,008 Z4506R Red reflectors with stop lamp holder (for B47 Blade) $ 72,00

8 Z4506FR Smoked reflectors with stop lamp holder (for B47 Blade Tech) $ 72,00

10 Z645R Push button red, 1 pcs. $ 4,00

10 Z645CR Push button silver, 1 pcs. $ 5,0012 Z191R Push button spring, 1 pcs. $ 1,0013 Z790R Trim $ 10,0014 Z599 Nylon stop bag opening yarn $ 2,0015 Z761NR Bolt, 1 pcs. $ 4,0016 Z4504AR Chromed Blade brand $ 9,0017 Z590R Pin. Medium, 2 pcs. $ 2,0018 Z140R Key locks with corresponding bush with red handle $ 11,00

Z661A Key locks with corresponding bush with silver handle $ 13,0020 Z3006R Plate below lock $ 3,00


115 SPAR

E PA

RTS


E470 SIMPLy III / E470 SIMPLy III TECH

1 Z458R E470 oval logo, 1 pcs $ 5,002 Z1294R E470 GIVI logo, 1 pcs $ 4,003 Z744R Top case reflector, 1 kit $ 5,004 Z1394 Top case reflectors (right and left), 1 kit $ 20,005 Z470CNR E470 top-shell black, 1 pcs. $ 52,006 Z159R Bag lock lining, 1 pcs. $ 3,007 Z112R Red pulley, 4 pcs. $ 4,008 Z635R Pin. D. 04x48 mm, 2 pcs. $ 2,009 Z115R Stop bag opening yarn, 2 pcs. $ 3,0010 Z450FNR E470 bottom-shell black, 1 pcs. $ 82,0011 Z1235 Injection covering cap $ 2,0012 Z191R Push button spring, 1 pcs. $ 1,0013 Z762NR Bolt, 1 pcs. $ 4,0014 Z645R Push button red, 1 pcs. $ 4,00

15 Z140R Key locks with corresponding bush with red handle $ 11,0016 Z641NR Hinge black $ 13,0017 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0018 Z721R Pin. D. 04x85 mm $ 2,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z1384R Cylinder spring and steek spheres, 1 kit $ 2,0021 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0022 Z647R Torsion spring, 1 pcs. $ 2,0023 Z632R Steel torsion spring $ 2,0024 Z643R Lock set element red, 1 pcs. $ 5,0025 Z409R Name holder, 1 pcs. $ 2,00

Z450FNM E450 - E470 bottom-shell black $ 82,00Z470CNMR E470 assembled top-shell black $ 88,00Z641NM Lock set $ 25,00

116

SPARE PARTS


E450 SIMPLy II

1 Z450CNM E450 top-shell black $ 85,002 Z450FNM E450 - E470 bottom-shell black $ 82,003 Z112R Red pulley, 4 pcs. $ 4,004 Z115R Stop bag opening yarn, 2 pcs. $ 3,005 Z159R Bag lock lining, 1 pcs. $ 3,006 Z191R Push button spring, 1 pcs. $ 1,007 Z451 Oval GIVI mark (reflector) $ 11,008 Z1234 Reflector with white background $ 23,009 Z457 s Couple of SIMPLY stickers DX/SX $ 4,0010 Z458R E470 oval logo, 1 pcs $ 5,0011 Z590R Pin. Medium, 2 pcs. $ 2,0012 Z645R Push button red, 1 pcs. $ 4,0013 Z762NR Bolt, 1 pcs. $ 4,00


Z641NM Lock set $ 25,0014 Z140R Key locks with corresponding bush with red handle $ 11,0015 Z409R Name holder, 1 pcs. $ 2,0016 Z630 Steel spheres D. 6 $ 2,0017 Z632R Steel torsion spring $ 2,0018 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z641NR Hinge black $ 13,0021 Z648 Cylinder spring $ 2,0022 Z643R Lock set element red, 1 pcs. $ 5,0023 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0024 Z647R Torsion spring, 1 pcs. $ 2,0025 Z721R Pin. D. 04x85 mm $ 2,0026 Z1235 Injection covering cap $ 2,00

117 SPAR

E PA

RTS


E370 / E370 TECH

1 Z1294R E470 GIVI logo, 1 pcs $ 4,002 Z750R Top case reflector, 1 kit $ 4,00

3 Z1383R Top case reflectors (right and left), 1 kit (only for E370) $ 17,00

4 Z370CNR E370 top-shell black, 1 pcs. $ 45,005 Z159R Bag lock lining, 1 pcs. $ 3,006 Z112R Red pulley, 4 pcs. $ 4,007 Z115R Stop bag opening yarn, 2 pcs. $ 3,008 Z635R Pin. D. 04x48 mm, 2 pcs. $ 2,0010 Z1235 Injection covering cap $ 2,0011 Z191R Push button spring, 1 pcs. $ 1,0012 Z761NR Bolt, 1 pcs. $ 4,0013 Z645R Push button red, 1 pcs. $ 4,0014 Z140R Key locks with corresponding bush with red handle $ 11,00

15 Z641NR Hinge black $ 13,0016 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0017 Z1384R Cylinder spring and steek spheres, 1 kit $ 2,0018 Z721R Pin. D. 04x85 mm $ 2,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0021 Z632R Steel torsion spring $ 2,0022 Z643R Lock set element red, 1 pcs. $ 5,0023 Z409R Name holder, 1 pcs. $ 2,0024 Z647R Torsion spring, 1 pcs. $ 2,00

Z846R Circuit covering cap, 1 pcs. $ 4,00Z350FNM E350 - E340 - E370 bottom-shell black $ 90,00Z370CNMR E370 assembled top-shell black $ 81,00Z641NM Lock set $ 25,00

118

SPARE PARTS


E340 VISION

1 Z340CNM E340 top-shell black $ 73,002 Z350FNM E350 - E340 - E370 bottom-shell black $ 90,003 Z112R Red pulley, 4 pcs. $ 4,004 Z115R Stop bag opening yarn, 2 pcs. $ 3,005 Z159R Bag lock lining, 1 pcs. $ 3,006 Z191R Push button spring, 1 pcs. $ 1,007 Z635R Pin. D. 04x48 mm, 2 pcs. $ 2,008 Z1648R Rerflector Micro with Bottom-shell argetato $ 15,009 Z645R Push button red, 1 pcs. $ 4,0010 Z229 Chromed GIVI brand $ 4,0011 Z721R Pin. D. 04x85 mm $ 2,0012 Z761NR Bolt, 1 pcs. $ 4,0013 Z1235 Injection covering cap $ 2,00

Z641NM Lock set $ 25,0014 Z140R Key locks with corresponding bush with red handle $ 11,0015 Z409R Name holder, 1 pcs. $ 2,0016 Z630 Steel spheres D. 6 $ 2,0017 Z632R Steel torsion spring $ 2,0018 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z641NR Hinge black $ 13,0021 Z648 Cylinder spring $ 2,0022 Z643R Lock set element red, 1 pcs. $ 5,0023 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0024 Z647R Torsion spring, 1 pcs. $ 2,00

119 SPAR

E PA

RTS


E300B

1 Z32CBM E300B top-shell white $ 56,002 Z29FNM E280 - E300N - E300B bottom-shell black $ 65,003 Z1732FSR Central reflector for E300B $ 13,004 Z314NM Hinge black climbed on $ 24,005 Z140R Key locks with corresponding bush with red handle $ 11,006 Z310 Base locking plate Monolock $ 11,007 Z112R Lid strap buttons (sold individually). $ 4,008 Z115R Stop cords (sold as pair). $ 3,00

9 Z195 Hinge pin 3” $ 2,0010 Z191R Push button spring, 1 pcs. $ 1,0011 Z315 Push button $ 5,0012 Z193 Hinge pin 2.5” $ 2,0013 Z312 Hinge plate $ 3,0014 Z236 Hinge spring $ 2,0015 Z243 Key lock plate $ 3,0016 Z2000R Chromed GIVI logo $ 6,00

E300N

1 Z32CNM E300N top-shell black $ 56,002 Z29FNM E280 - E300N - E300B bottom-shell black $ 65,003 Z1732SR Central reflector for E300N $ 14,004 Z314NM Hinge black climbed on $ 24,005 Z140R Key locks with corresponding bush with red handle $ 11,006 Z310 Base locking plate Monolock $ 11,007 Z112R Lid strap buttons (sold individually). $ 4,008 Z115R Stop cords (sold as pair). $ 3,00

9 Z195 Hinge pin 3” $ 2,0010 Z191R Push button spring, 1 pcs. $ 1,0011 Z315 Push button $ 5,0012 Z193 Hinge pin 2.5” $ 2,0013 Z312 Hinge plate $ 3,0014 Z236 Hinge spring $ 2,0015 Z243 Key lock plate $ 3,0016 Z2000R Chromed GIVI logo $ 6,00

120

SPARE PARTS


E30TNMALD

1 Z30CNM E30 top-shell black $ 38,003 Z112R Red pulley, 4 pcs. $ 4,004 Z115R Stop bag opening yarn, 2 pcs. $ 3,005 Z140R Key locks with corresponding bush with red handle $ 11,006 Z191R Push button spring, 1 pcs. $ 1,007 Z193 Hinge pin 62 mm $ 2,008 Z195 Pin D. 04x80 mm $ 2,0010 Z210 Chrome bushing for lock set $ 4,00

11 Z236 Hinge spring $ 2,0012 Z243 Key lock plate $ 3,0013 Z310 Bolt $ 11,0014 Z312 Hinge plate $ 3,0015 Z314NM Hinge black climbed on $ 24,0016 Z315 Push button $ 5,0017 Z405 s Name holder $ 3,00

E36

1 Z36CNM E36 - E45 top-shell black $ 71,003 Z101 Push set protection $ 13,004 Z106 Bolt $ 11,005 Z108 Top-case push button red $ 3,006 Z109 Long bolt springs $ 2,007 Z112R Red pulley, 4 pcs. $ 4,008 Z185 Hinge plate $ 2,009 Z119 Top-case reflector $ 7,0010 Z151N Top-case hinge E36 black $ 14,0011 Z153 Key lock plate $ 3,0012 Z159R Bag lock lining, 1 pcs. $ 3,00

13 Z160 Inner document holder $ 14,0014 Z165 s Adhesive series $ 6,0015 Z167 s Spare elastic belt $ 10,0016 Z1237 Push button spring with washer $ 2,0017 Z664 Stop bag opening yarn with plastic sleeve $ 2,0018 Z186 Rectangular GIVI mark $ 5,0019 Z590R Pin. Medium, 2 pcs. $ 2,0020 Z195 Pin D. 04x80 mm $ 2,0022 Z405 s Name holder $ 3,0023 Z140R Key locks with corresponding bush with red handle $ 11,00


121 SPAR

E PA

RTS


E45

1 Z36CNM E36 - E45 top-shell black $ 71,002 Z45FNM E45 bottom-shell black $ 103,003 Z101 Push set protection $ 13,004 Z106 Bolt $ 11,005 Z108 Top-case push button red $ 3,006 Z109 Long bolt springs $ 2,007 Z112R Red pulley, 4 pcs. $ 4,008 Z153 Key lock plate $ 3,009 Z119 Top-case reflector $ 7,0010 Z152N Top-case hinge E45 black $ 12,0011 Z117 Hinge plate $ 3,0012 Z159R Bag lock lining, 1 pcs. $ 3,00

13 Z160 Inner document holder $ 14,0014 Z166 Series stickers E45 $ 9,0015 Z167 s Spare elastic belt $ 10,0016 Z1237 Push button spring with washer $ 2,0017 Z186 Rectangular GIVI mark $ 5,0018 Z590R Pin. Medium, 2 pcs. $ 2,0019 Z195 Pin D. 04x80 mm $ 2,0020 Z210 Chrome bushing for lock set $ 4,0021 Z405 s Name holder $ 3,0022 Z156 Key for case lock $ 10,0023 Z664 Stop bag opening yarn with plastic sleeve $ 2,00


E35 TRAFFIC II

1 Z106 Bolt $ 11,002 Z109 Long bolt springs $ 2,003 Z112R Red pulley, 4 pcs. $ 4,004 Z1237 Push button spring with washer $ 2,005 Z193 Hinge pin 62 mm $ 2,006 Z200 GIVI logo Monokey® $ 5,007 Z282 Push button $ 6,008 Z298 Handle felt $ 1,0011 Z362 Light seat chromed $ 5,0012 Z828 Stop lamp holder $ 6,00


13 Z140R Key locks with corresponding bush with red handle $ 11,0015 Z284 Maxia spring rod 1,3 $ 2,0016 Z286 Glass for small name plate $ 3,0019 Z290N s Hinge black $ 21,0021 Z294 Pin 55,5 mm $ 2,0022 Z295 Pin 58,5 mm $ 2,0023 Z296 s Pin 101 mm $ 2,0024 Z297 s Pin 140 mm $ 2,0025 Z287 Maxia hinge plate $ 10,00

122

SPARE PARTS


E260 MICRO II

3 Z112R Red pulley, 4 pcs. $ 4,004 Z115R Stop bag opening yarn, 2 pcs. $ 3,005 Z191R Push button spring, 1 pcs. $ 1,006 Z310 Bolt $ 11,007 Z635R Pin. D. 04x48 mm, 2 pcs. $ 2,008 Z1236 Reflector with white background $ 15,009 Z645R Push button red, 1 pcs. $ 4,0010 Z649 Micro 2 GIVI mark $ 7,00

Z641NM Lock set $ 25,0012 Z140R Key locks with corresponding bush with red handle $ 11,0013 Z409R Name holder, 1 pcs. $ 2,00

14 Z630 Steel spheres D. 6 $ 2,0015 Z632R Steel torsion spring $ 2,0016 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0017 Z640R Plate below lock, 1 pcs. $ 4,0018 Z641NR Hinge black $ 13,0019 Z648 Cylinder spring $ 2,0020 Z643R Lock set element red, 1 pcs. $ 5,0021 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0022 Z647R Torsion spring, 1 pcs. $ 2,0023 Z721R Pin. D. 04x85 mm $ 2,0024 Z1235 Injection covering cap $ 2,00

123 SPAR

E PA

RTS


E350 FLOw

1 Z350CNM E350 top-shell black $ 50,002 Z350FNM E350 - E340 - E370 bottom-shell black $ 90,003 Z112R Red pulley, 4 pcs. $ 4,004 Z115R Stop bag opening yarn, 2 pcs. $ 3,005 Z159R Bag lock lining, 1 pcs. $ 3,006 Z191R Push button spring, 1 pcs. $ 1,007 Z635R Pin. D. 04x48 mm, 2 pcs. $ 2,008 Z1236 Reflector with white background $ 15,009 Z645R Push button red, 1 pcs. $ 4,0011 Z758 s Oval GIVI logo Flow $ 3,0012 Z761NR Bolt, 1 pcs. $ 4,0013 Z641NM Lock set $ 25,0014 Z140R Key locks with corresponding bush with red handle $ 11,00

15 Z409R Name holder, 1 pcs. $ 2,0016 Z630 Steel spheres D. 6 $ 2,0017 Z632R Steel torsion spring $ 2,0018 Z637R Pin. D. 04x75 mm, (1 piece) $ 2,0019 Z640R Plate below lock, 1 pcs. $ 4,0020 Z641NR Hinge black $ 13,0021 Z648 Cylinder spring $ 2,0022 Z643R Lock set element red, 1 pcs. $ 5,0023 Z644R Opening push button, red, 1 pcs. (for top case V46) $ 5,0024 Z647R Torsion spring, 1 pcs. $ 2,0025 Z721R Pin. D. 04x85 mm $ 2,0026 Z1235 Injection covering cap $ 2,0027 Z846R Circuit covering cap, 1 pcs. $ 4,00

124

NOTE

MOTOPLANETARy DESIGN

GIVI USA Inc. East Coast - 9309 Forsyth Park Drive, Charlotte, NC 28273 - 704 679 4123west Coast - 506 East Glendale Avenue, Sparks, NV 89431 - 775 359 0900

[email protected] www.giviusa.com

Documents

2014 GIVI USA General Catalog