2014 Forte Owner's Manual - Kia Canada

Kia, THE COMPANYThank you for becoming the owner of a new Kia vehicle.As a global car manufacturer focused on building high-quality vehi-cles with exceptional value, Kia Motors is dedicated to providing youwith a customer service experience that exceeds your expectations.

All information contained in this Owner’s Manual is accurate at thetime of publication. However, Kia reserves the right to make changesat any time so that our policy of continual product improvement canbe carried out.

This manual applies to all models of this vehicle and includes descrip-tions and explanations of optional as well as standard equipment. As aresult, you may encounter material in this manual that is not applica-ble to your specific Kia vehicle.

Drive safely and enjoy your Kia!

i

Thank you for choosing a Kia vehicle.When you require service, remember that your Kia dealerknows your vehicle best. Your dealer has factory-trained tech-nicians, recommended special tools and genuine Kia replace-ment parts. It is dedicated to your complete customer satisfac-tion.Because subsequent owners require this important informationas well, this publication should remain with the vehicle if it issold.This manual will familiarize you with operational, mainte-nance and safety information about your new vehicle. It is sup-plemented by a Warranty and Consumer Information manualthat provides important information on all warranties regardingyour vehicle.We urge you to read these publications carefully and follow therecommendations to help assure enjoyable and safe operationof your new vehicle.Kia offers a great variety of options, components and featuresfor its various models. Therefore, some of the equipmentdescribed in this manual, along with the various illustrations,may not be applicable to your particular vehicle.

The information and specifications provided in this manualwere accurate at the time of printing. Kia reserves the right todiscontinue or change specifications or design at any timewithout notice and without incurring any obligation. If youhave questions, always check with your Kia dealer.We assure you of our continuing interest in your motoringpleasure and satisfaction in your Kia vehicle.

© 2013 Kia Canada Inc.All rights reserved. Reproduction by any means, electronic ormechanical, including photocopying, recording, or by anyinformation storage and retrieval system or translation inwhole or part is not permitted without written authorizationfrom Kia Canada Inc..Printed in Korea

Foreword

ii

1

2

3

4

5

6

7

8

I

IntroductionHow to use this manual / Fuel requirements / Vehicle break-in process

Your vehicle at a glanceExterior overview / Interior overview / Instrument panel overview / Engine compartment

Safety features of your vehicleSeats / Seat belts / Child restraint system / Air bag

Features of your vehicleKeys / Door locks / Tailgate / Windows / Hood / Fuel filler lid / Panoramic sunroof / Steering wheel / Mirrors/ Instrument cluster / Lighting / Wipers & Washers / Climate control system / Audio system / Etc.

Driving your vehicleBefore driving / Engine start/stop button / Transaxle / Brake system / Cruise control system /Active ECO system / Winter driving / Vehicle load limit / Etc.

What to do in an emergencyRoad warning / Emergency while driving / Emergency starting / Engine overheat / Flat tire / Towing / Etc.

MaintenanceEngine compartment / Maintenance service / Engine oil / Engine coolant / Brake fluid / Washer fluid /Parking brake / Air cleaner / Wiper blades / Battery / Tire and wheels / Fuses / Etc.

Specifications & Consumer information

Index

table of contents

1

Introduction

How to use this manual . . . . . . . . . . . . . . . . . . . . . . 1-2Fuel requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

• Gasoline containing alcohol and methanol . . . . . . . . . 1-3• Do not use methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4• Fuel Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Vehicle Break-In Process . . . . . . . . . . . . . . . . . . . . . 1-5

Introduction

21

We want to help you get the greatestpossible driving pleasure from yourvehicle. Your Owner’s Manual canassist you in many ways. We strong-ly recommend that you read theentire manual. In order to minimizethe chance of death or injury, youmust read the WARNING and CAU-TION sections in the manual.Illustrations complement the wordsin this manual to best explain how toenjoy your vehicle. By reading yourmanual, you will learn about fea-tures, important safety information,and driving tips under various roadconditions.

The general layout of the manual isprovided in the Table of Contents.Use the index when looking for aspecific area or subject; it has analphabetical listing of all located inthe back of this manual.Sections: This manual has eight sec-tions plus an index. Each sectionbegins with a brief list of contents soyou can tell at a glance if that sectionhas the information you want.

You will find various types of safetyinstructions in this manual. Theseinstructions were prepared toenhance your personal safety.Carefully read and follow ALL proce-dures and recommendations provid-ed in these instructions.

✽✽ NOTICEA NOTICE indicates interesting orhelpful information is being provided.

HOW TO USE THIS MANUAL

WARNING A WARNING indicates a situationin which harm, serious bodilyinjury or death could result if thewarning is ignored.

CAUTIONA CAUTION indicates a situationin which damage to your vehiclecould result if the caution isignored.

1 3

Introduction

Your new Kia vehicle is designed touse only unleaded fuel having apump octane number ((R+M)/2) of87 (Research Octane Number 91) orhigher.

Your new vehicle is designed toobtain maximum performance withUNLEADED FUEL, as well as mini-mize exhaust emissions and sparkplug fouling.

Never add any fuel system cleaningagents to the fuel tank other thanwhat has been specified. (Consult anauthorized Kia dealer for details.)

✽✽ NOTICETighten the cap until it clicks once,otherwise the Check Engine light will illuminate.

Gasoline containing alcohol andmethanolGasohol, a mixture of gasoline andethanol (also known as grain alco-hol), and gasoline or gasohol con-taining methanol (also known aswood alcohol) are being marketedalong with or instead of leaded orunleaded gasoline.Pursuant to EPA regulations, ethanolmay be used in your vehicle. Do notuse gasohol containing more than10% ethanol, and do not use gaso-line or gasohol containing anymethanol. Ethanol provides lessenergy than gasoline and it attractswater, and it is thus likely to reduceyour fuel efficiency and could loweryour MPG results. Methanol maycause drivability problems and dam-age to the fuel system. Discontinueusing gasohol of any kind if drivabili-ty problems occur. Vehicle damageor drivability problems may not becovered by the manufacturer's war-ranty if they result from the use of:

1. Gasoline or gasohol containingmethanol.

2. Leaded fuel or leaded gasohol.

FUEL REQUIREMENTS

WARNING - Refueling• Do not "top off" after the noz-

zle automatically shuts off.Attempts to force more fuelinto the tank can cause fueloverflow onto you and theground causing a risk of fire.

• Always check that the fuel capis installed securely to pre-vent fuel spillage, especiallyin the event of an accident.

Introduction

41

"E85" fuel is an alternative fuel com-prised of 85 percent ethanol and 15percent gasoline, and is manufac-tured exclusively for use in FlexibleFuel Vehicles. “E85” is not compati-ble with your vehicle. Use of “E85”may result in poor engine perform-ance and damage to your vehicle'sengine and fuel system. Kia recom-mends that customers do not usefuel with an ethanol content exceed-ing 10 percent.

✽✽ NOTICEYour New Vehicle Limited Warrantydoes not cover damage to the fuelsystem or any performance prob-lems caused by the use of “E85” fuel.

Use of MTBEKia recommends avoiding fuels con-taining MTBE (Methyl Tertiary ButylEther) over 15.0% vol. (OxygenContent 2.7% weight) in your vehicle.Fuel containing MTBE over 15.0%vol. (Oxygen Content 2.7% weight)may reduce vehicle performance andproduce vapor lock or hard starting.

Do not use methanolFuels containing methanol (woodalcohol) should not be used in yourvehicle. This type of fuel can reducevehicle performance and damagecomponents of the fuel system.

Fuel AdditivesKia recommends that you use goodquality gasolines treated with deter-gent additives such as TOP TIERDetergent Gasoline, which helpsprevent deposit formation in theengine. These gasolines will help theengine run cleaner and enhance per-formance of the Emission ControlSystem. For more information onTOP TIER Detergent Gasoline,please go to the website (www.top-tiergas.com).For Customers who do not use TOPTIER Detergent Gasoline regularly,and have problems starting or theengine does not run smoothly, addi-tives that you can buy separatelymay be added to the gasoline. IfTOP TIER Detergent Gasoline is notavailable, one bottle of additiveadded to the fuel tank at 12,000 kmor every engine oil change is recom-mended. Additives are available fromyour authorized Kia dealer along withinformation on how to use them. Donot mix other additives.

CAUTIONYour New Vehicle LimitedWarranty may not cover damageto the fuel system and any per-formance problems that arecaused by the use of fuels con-taining methanol or fuels con-taining MTBE (Methyl TertiaryButyl Ether) over 15.0% vol.(Oxygen Content 2.7% weight.)

1 5

Introduction

Operation in foreign countriesIf you are going to drive your vehiclein another country, be sure to:• Observe all regulations regarding

registration and insurance.• Determine that acceptable fuel is

available.

No special break-in period is needed.By following a few simple precautionsfor the first 1,000 km (600 miles) youmay add to the performance, econo-my and life of your vehicle.• Do not race the engine.• While driving, keep your engine

speed (rpm, or revolutions perminute) between 2,000 rpm and4,000 rpm.

• Do not maintain a single speed forlong periods of time, either fast orslow.Varying engine speed is need-ed to properly break-in the engine.

• Avoid hard stops, except in emer-gencies, to allow the brakes to seatproperly.

• Don't let the engine idle longer than3 minutes at one time.

• Don't tow a trailer during the first2,000 km (1,200 miles) of operation.

VEHICLE BREAK-IN PROCESS

Exterior overview I . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Exterior overview II. . . . . . . . . . . . . . . . . . . . . . . . . 2-3Interior overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4Instrument panel overview . . . . . . . . . . . . . . . . . . . 2-5Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . 2-6

2

Your vehicle at a glance

Exterior overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Interior overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4Instrument panel overview . . . . . . . . . . . . . . . . . . . 2-5Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . 2-6 2


22

EXTERIOR OVERVIEW

1. Hood...................................................4-29

2. Head lamp..........................................4-95

3. Fog lamp ............................................4-95

4. Wheel and tire ....................................7-44

5. Outside rearview mirror......................4-48

6. Front windshield wiper blades .....4-99, 7-39

7. Windows.............................................4-24

8. Parking assist system ........................4-86

9. Front removable towing hook.............6-23

OYDNIN3001

■ Front view

❈ The actual shape may differ from the illustration.

2 3


10. Door locks ........................................4-18

11. Fuel filler lid......................................4-31

12. Rear combination lamp

13. High mounted stop lamp

14. Trunk.................................................4-22

15. Antenna..........................................4-144

16. Parking assist system ......................4-86

OYDEIN2002

■ Rear view



42

INTERIOR OVERVIEW

1. Driver position memory systembutton ..................................................3-8

2. Inside door handle ............................4-18

3. Outside rearview mirror folding.........4-50

4. Outside rearview mirror control ........4-49

5. Central door lock switch....................4-19

6. Power window lock switch.................4-27

7. Power window switch ........................4-24

8. Instrument panel illumination controlswitch ................................................4-53

9. Active ECO On/Off switch.................5-40

10. Parking assist system On/Offbutton ..............................................4-87

11. ESC Off button................................5-27

12. Heated steering wheel On/Offswitch ..............................................4-40

13. Steering wheel ................................4-38

14. Tilt and telescopic steering controllever ................................................4-39

15. Trunk lid open lever.........................4-22

16. Fuel filler lid open lever...................4-31

17. Inner fuse panel ..............................7-59

18. Hood release lever..........................4-29

OYDNIN2003❈ The actual shape may differ from the illustration.

2 5


INSTRUMENT PANEL OVERVIEW

1. Instrument cluster................................4-52

2. Lighting control lever ...........................4-93

3. Audio remote control buttons ............4-145

4. Horn.....................................................4-39

5. Driver's front air bag............................3-44

6. Cruise control button ...........................5-35

7. Wiper and washer control lever...........4-99

8. Ignition switch orEngine start/stop button .................5-5, 5-7

9. Digital clock .......................................4-141

10. Hazard warning flasher .......................6-2

11. Audio ...............................................4-144

12. Climate control system.........4-107, 4-117

13. Shift lever .................................5-13, 5-16

14. Passenger's front air bag ..................3-44

15. Glove box ........................................4-132

16. Parking brake ....................................5-23

17. Cup holder.......................................4-136

18. LCD display control button ................4-54

OYDEIN2004CN



62

ENGINE COMPARTMENT

1. Engine oil filler cap ...........................7-29

2. Engine oil dipstick .............................7-29

3. Brake/clutch fluid reservoir ...............7-34

4. Air cleaner.........................................7-36

5. Fuse box ...........................................7-58

6. Positive battery terminal ...................7-41

7. Negative battery terminal..................7-41

8. Windshield washer fluid reservoir .....7-35

9. Radiator cap .....................................7-32

10. Engine coolant reservoir .................7-31

OYDNMC2041

* The actual engine room in the vehicle may differ from the illustration.

Safety features of your vehicle

Seat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2• Front seat adjustment - Manual . . . . . . . . . . . . . . . . . 3-4• Front seat adjustment - Power. . . . . . . . . . . . . . . . . . . 3-6• Driver position memory system . . . . . . . . . . . . . . . . . . 3-8• Headrest (Front seat) . . . . . . . . . . . . . . . . . . . . . . . . . 3-10• Seatback pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11• Rear seat adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 3-11• Headrest (Rear seat) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11• Folding the rear seat . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Seat belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16• Seat belt warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17• Seat belt (3-point system) . . . . . . . . . . . . . . . . . . . . . . 3-17• Pre-tensioner seat belt. . . . . . . . . . . . . . . . . . . . . . . . . 3-20• Seat belt precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23• Care of seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Child restraint system . . . . . . . . . . . . . . . . . . . . . . 3-26• Using a child restraint system . . . . . . . . . . . . . . . . . . 3-27• Tether Anchor system . . . . . . . . . . . . . . . . . . . . . . . . . 3-30• Lower anchor ststem. . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

Air bag-supplemental restraint system . . . . . . . . 3-33• Ari bag system operation . . . . . . . . . . . . . . . . . . . . . . 3-34• Do not install a child restraint on a front

passenger’s seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35• Air bag warning light . . . . . . . . . . . . . . . . . . . . . . . . . 3-36• SRS components and functions . . . . . . . . . . . . . . . . . 3-37

• Occupant detection system. . . . . . . . . . . . . . . . . . . . . 3-39• Driver’s and passenger’s front air bag . . . . . . . . . . . 3-44• Side air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-47• Curtain air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48• Inflation/non-inflation conditions of air bag . . . . . . 3-49• SRS Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54• Air bag warning label . . . . . . . . . . . . . . . . . . . . . . . . . 3-55 3


23

Driver’s seat(1) Seat adjustment, forward / back-

ward(2) Seatback recliner(3) Seat adjustment, height (for driver’s

seat)(4) Lumbar support (for driver’s seat)(5) Driver position memory system*(6) Headrest

Front passenger’s seat(7) Seat adjustment, forward / back-

ward(8) Seatback recliner(9) Headrest

Rear seat(10) Armrest(11) Ski through(12) Headrest(13) Seat-back folding lever

* : if equipped

SEAT

OYDDSA2001

Manual seat

Power seat

3 3


WARNING - Uprightingseat

Do not press the release leveron a manual seatback withoutholding and controlling theseatback. The seatback willspring upright possibly impact-ing you or other passengers.

WARNING - Looseobjects

Do not place anything in the dri-ver's foot well or under the frontseats. Loose objects in the dri-ver's foot area could interferewith the operation of the footpedals.

WARNING - Driverresponsibility for passen-gers

The driver must advise the pas-senger to keep the seatback inan upright position wheneverthe vehicle is in motion. If a seatis reclined during an accident,the restraint system's ability torestrain will be greatly reduced.

WARNING - Seat cushionOccupants should never sit onseat cushions. The passenger'ships may slide under the lapportion of the seat belt duringan accident or a sudden stop.

1KMN3661


43

Front seat adjustment - manual Forward and backward

To move the seat forward or back-ward:1. Pull the seat slide adjustment

lever up and hold it.2. Slide the seat to the position you

desire.3. Release the lever and make sure

the seat is locked in place.Adjust the seat before driving, andmake sure the seat is locked securelyby trying to move forward and back-ward without using the lever. If theseat moves, it is not locked properly.

WARNING - Seat adjustment

• Do not adjust the seat whilewearing seat belts. Moving theseat forward will cause strongpressure on the abdomen.

• Do not place your hand nearthe seat bottom or seat trackwhile adjusting the seat. Yourhand could get caught in theseat mechanism.

WARNING - Driver’s seat• Never attempt to adjust the

seat while the vehicle is mov-ing. This could result in lossof control of your vehicle.

• Do not allow anything to inter-fere with the normal positionof the seatback. Storing itemsagainst a seatback or in anyother way interfering withproper locking of a seatbackcould result in a serious orfatal injury in a sudden stopor collision.

• Sit as far back as possiblefrom the steering wheel whilestill maintaining comfortablecontrol of your vehicle. A dis-tance of at least 10" from yourchest to the steering wheel isrecommended. Failure to doso could result in air bag infla-tion injuries to the driver.

OYDDSA2002

3 5


Seatback angle

To recline the seatback:1. Lean forward slightly and lift up the

seatback recline lever.2. Carefully lean back on the seat

and adjust the seatback of theseat to the position you desire.

3. Release the lever and make surethe seatback is locked in place.(The lever MUST return to its orig-inal position for the seatback tolock.)

Seat cushion height (for driver's seat)

To change the height of the seatcushion push the lever upwards ordownwards.• To lower the seat cushion, push the

lever down several times.• To raise the seat cushion, push the

lever up several times.

WARNING - Unexpectedseat movement

After adjusting a manual seat,always check that it is locked byshifting your weight to the frontand back. Sudden or unexpect-ed movement of the driver'sseat could cause you to losecontrol of the vehicle.

OYDDSA2004

OYDDSA2003


63

Lumbar support (for driver’s seat)

Press the front portion of the switchto increase support, or the rear por-tion of the switch to decrease sup-port.

Front seat adjustment - powerThe front seat can be adjusted byusing the control switch located onthe outside of the seat cushion.Before driving, adjust the seat to theproper position so as to easily con-trol the steering wheel, pedals andswitches on the instrument panel.

WARNINGThe power seat is operable withthe ignition OFF.Therefore, children should neverbe left unatteded in the vehicle.

CAUTION• The power seat is driven by an

electric motor. Stop operatingonce the adjustment is com-pleted. Excessive operationmay damage the electricalequipment.

• When in operation, the powerseat consumes a large amountof electrical power. To preventunnecessary charging systemdrain, don’t adjust the powerseat longer than necessarywhile the engine is not running.

• Do not operate two or morepower seat control switches atthe same time. Doing so mayresult in power seat motor orelectrical component malfunc-tion.

OYDDSA2008

3 7


Forward and backward

Push the control switch forward orbackward to move the seat to thedesired position. Release the switchonce the seat reaches the desiredposition.

Seatback angle

Push the control switch forward orbackward to move the seatback tothe desired angle. Release theswitch once the seat reaches thedesired position.

Seat cushion height (for driver's side)

Pull the front portion of the controlswitch up to raise or down to lowerthe front part of the seat cushion. Pullthe rear portion of the control switchup to raise or down to lower the rearpart of the seat cushion. Release theswitch once the seat reaches thedesired position.

OYDDSA2006

OYDDSA2007

OYDDSA2005


83

Lumbar support (for driver’s seat, if equipped)

The lumbar support can be adjustedby pressing the lumbar supportswitch on the side of the driver'sseat. Press the front portion of theswitch to increase support, or therear portion of the switch to decreasesupport.

Driver position memory system(if equipped, for power seat)

A driver position memory system isprovided to store and recall the driverseat position with a simple buttonoperation. By saving the desired posi-tion into the system memory, differentdrivers can reposition the driver seatbased upon their driving preference.If the battery is disconnected, thedesired seat position memory willneed to be re-saved.

OYDDSA2014

WARNING Never attempt to operate thedriver position memory systemwhile the vehicle is moving.This could result in loss of yourvehicle, and an accident causingdeath, serious injury, or propertydamage.

OYDDSA2008

3 9


Storing positions into memoryusing the buttons on the doorStoring driver’s seat positions1. Shift the shift lever into P while the

ignition switch is ON.2. Adjust the driver seat to position

comfortable for the driver.3. Press SET button on the control

panel. The system will beep once.4. Press one of the memory buttons

(1 or 2) within 5 seconds afterpressing the SET button. The sys-tem will beep twice when memoryhas been successfully stored.

Recalling positions from memory1. Shift the shift lever into P while the

ignition switch is ON.2. To recall the position in memory,

press the desired memory button(1 or 2). The system will beeponce, then the driver seat willautomatically adjust to the storedpositions.

Adjusting the control switch for thedriver seat while the system is recall-ing the stored position will cause themovement to stop and move in thedirection that the control switch ismoved.

Easy access function (if equipped)With the shift lever in the P position,the system will move the driver's seatautomatically as follows:• Without smart key system

- It will move the driver’s seat rear-ward when the ignition key isremoved and front driver’s door isopened.

- It will move the driver’s seat for-ward when the ignition key isinserted.

• With smart key system- It will move the driver’s seat rear-

ward when the engine start/stopbutton is turned to the OFF posi-tion and front driver’s door isopened.

- It will move the driver’s seat for-ward when the engine start/stopbutton is turned to the ACC orSTART position.

You can activate or deactivate thisfeature. Refer to "User settings" inchapter 4.


103

Headrest (for front seat)

The driver's and front passenger'sseats are equipped with a headrestfor the occupant's safety and comfort.The headrest not only provides com-fort for the driver and front passen-ger, but also helps protect the headand neck in the event of a collision.

For maximum effectiveness in caseof an accident, the headrest shouldbe adjusted so the middle of theheadrest is at the same height of thecenter of gravity of an occupant'shead. Generally, the center of gravityof most people's head is similar withthe height of the top of their eyes.Also, adjust the headrest as close toyour head as possible.For this reason, the use of a cushionthat holds the body away from theseatback is not recommended.

Adjusting the height up and down

To raise the headrest, pull it up to thedesired position (1). To lower theheadrest, push and hold the releasebutton (2) on the headrest supportand lower the headrest to the desiredposition (3).

WARNING - Headrestremoval/adjustment

• Do not operate the vehiclewith the headrests removed.Headrests can provide criticalneck and head support in acrash.

• Do not adjust the headrestheight while the vehicle is inmotion. Driver may lose con-trol of the vehicle.

OYDDSA2009OMG038400

3 11


Removal and installation

To remove the headrest, raise it asfar as it can go then press therelease button (1) while pulling theheadrest up (2).To reinstall the headrest, put theheadrest poles (3) into the holeswhile pressing the release button (1).Then adjust it to the appropriateheight.

Seatback pocket

The seatback pocket is provided onthe back of the front passenger’sseatback.

Rear seat adjustmentHeadrest (for rear seat)

The rear seat is equipped with head-rests in all the seating positions forthe occupant's safety and comfort.The headrest not only provides com-fort for passengers, but also helpsprotect the head and neck in theevent of a collision.

WARNING - Seatbackpocket

Do not put heavy or sharpobjects in the seatback pocket.An occupant could contact suchobjects in a crash. Heavyobjects in the front passengerseatback could also interferewith the air bag sensing system.

OYDDSA2010 OYDDCO2051

ONF039401


123

For maximum effectiveness in caseof an accident, the headrest shouldbe adjusted so the middle of theheadrest is at the same height of thecenter of gravity of an occupant'shead. Generally, the center of gravityof most people's head is similar withthe height as the top of their eyes.Also adjust the headrest as close toyour head as possible. For this rea-son, the use of a cushion that holdsthe body away from the seatback isnot recommended. Adjusting the height up and down

(if equipped)To raise the headrest, pull it up to thedesired position (1). To lower theheadrest, push and hold the releasebutton (2) on the headrest supportand lower the headrest to the desiredposition (3).

Removal and installationTo remove the headrest, raise it asfar as it can go then press therelease button (1) while pulling theheadrest upward (2).To reinstall the headrest, put theheadrest poles (3) into the holeswhile pressing the release button (1).Then adjust it to the appropriateheight and ensure that it locks inposition.Make sure the headrest locks inposition after adjusting.

OYDDSA2013OYDDSA2012

3 13


Armrest

To use the armrest, pull it forwardfrom the seatback.

Carrying long/narrow cargo (if equipped)Pull the armrest down using thestrap provided on the armrest. Pullthe cover down while pushing therelease lever down. Additional cargospace is provided to accommodatelong/narrow cargo (skis, poles, lum-ber, etc.) not able to fit properly in thetrunk when closed.

OYDDSA2019

OYDDSA2020

CAUTION• Make sure the engine is off,

the shift lever is in P (for auto-matic transaxle or 1st (formanual transaxle) and theparking brake is appliedwhenever loading or unload-ing cargo. The vehicle maymove if the shift lever is inad-vertently moved to anotherposition.

• Be careful when loading cargothrough the rear passengerseats to prevent damage tothe vehicle interior.

• When cargo is loaded throughthe rear passenger seats,ensure the cargo is properlysecured to prevent it from mov-ing while driving. Unsecuredcargo in the passenger com-partment can cause damage tothe vehicle or injury to its occu-pants.


143

Folding the rear seatThe rear seatbacks may be folded tofacilitate carrying long items or toincrease the luggage capacity of thevehicle.

To fold the rear seatback1. Make sure the rear seat belt web-

bing is in the guide to prevent theseat belt from being damaged.

2. Set the front seatback to theupright position and if necessary,slide the front seat forward.

3. Lower the rear headrests to thelowest position.

4. Open the trunk.4.Pull the lock release lever (1) and

fold the rear seatback forward anddown firmly.If the seat belt locks after unfoldingthe rear seatback, pull out thelocked seat belt, release it then pullit out again.

OYDDSA2017

OYDDSA2018

WARNING Never allow passengers to siton top of the folded down seat-back while the vehicle is mov-ing. This is not a proper seatingposition and no seat belts areavailable for use. This couldresult in serious injury or deathin case of an accident or sud-den stop.

WARNING - ObjectsObjects carried on the foldeddown seatback should notextend higher than the top ofthe front seatbacks. This couldallow cargo to slide forward andcause injury or damage duringsudden stops.

OYDDSA2016

3 15


To unfold the rear seat1. To use the rear seat, lift and pull

the seatback rearward. Pull theseatback firmly until it clicks intoplace. Make sure the seatback islocked in place. When you returnthe seatback to its upright posi-tion, always be sure it has lockedinto position by pushing on the topof the seatback.

2. Return the rear seat belt to theproper position.

3. When the seatback is completelyinstalled, check the seatback fold-ing lever again.

When returning the rear seatbacks tothe upright position, remember toreturn the rear shoulder belts to theirproper position.

WARNING - CargoDo not place heavy objects inthe rear seats, since they can-not be properly secured andmay hit vehicle occupants in afrontal collision.

WARNING - Rear seatbackWhen returning the rear seat-back from a folded to an uprightposition, hold the seatback andreturn it slowly. Ensure that theseatback is completely lockedinto its upright position bypushing on the top of the seat-back. In an accident or suddenstop, the unlocked seatbackcould allow cargo to move for-ward with great force and enterthe passenger compartment.


163

Seat belt restraint systemSeat belts are designed to bear uponthe bony structure of the body, andshould be worn low across thepelvis, chest and shoulders as appli-cable. wearing the lap section of thebelt across the abdominal area mustbe avoided.Seat belts should be adjusted asfirmly as possible, consistent withcomfort, to provide the protection forwhich they have been designed.A slack belt will greatly reduce theprotection afforded to the wearer.Care should be taken to avoid con-tamination of the webbing with pol-ishes, oils and chemicals, and partic-ularly battery acid. Cleaning maysafely be carried out using mild soapand water. The belt should bereplaced if webbing becomes frayed,contaminated or damaged.

• For maximum restraint system pro-tection, the seat belts must alwaysbe used whenever the vehicle ismoving. A properly positionedshoulder belt should be positionedmidway over your shoulder acrossyour collarbone.

• Never allow children to ride in thefront passenger seat. See childrestraint system section for furtherdiscussion.

SEAT BELTS

WARNING - Shoulder beltNever wear the shoulder beltunder your arm or behind yourback. An improperly positionedshoulder belt cannot protect theoccupant in a crash.

WARNING - Damagedseat belt

Replace the entire seat beltassembly if any part of the web-bing or hardware is damaged asyou can no longer be sure that adamaged seat belt will provideprotection in a crash.

WARNING - Twisted seatbelt

Make sure your seat belt is nottwisted when worn. A twistedseat belt may not properly pro-tect you in an accident andcould even cut into your body.

WARNING - Seat belt buckle

Do not allow foreign material(gum, crumbs, coins, etc.) toobstruct the seat belt buckle.This may prevent the seat beltfrom fastening securely.

3 17


Seat belt warning (for driver’s seat)

The driver's seat belt warning lightand chime will activate to the follow-ing table when the ignition switch isin "ON" position. *1 Warning pattern repeats 11 times

with an interval of 24 seconds. Ifthe driver's seat belt is buckled, thelight will stop within 6 seconds andchime will stop immediately.

*2 The light will stop within 6 secondsand chime will stop immediately.

Seat belt - Driver's 3-point systemwith emergency locking retractor

To fasten your seat belt:To fasten your seat belt, pull it out ofthe retractor and insert the metal tab(1) into the buckle (2). There will bean audible "click" when the tab locksinto the buckle.

1GQA2083 B180A01NF-1

Conditions Warning Pattern

Seat BeltVehicle

SpeedLight-Blink

Chime-

Sound

Unbuckled 6 seconds

Buckled 6 seconds None

Buckled →Unbuckled

Below 5 km/h

(3 mph)6 seconds None

5 km/h~

10 km/h6 seconds

Above 10 km/h

(6 mph)

6 sec. on / 24 sec. off

(11 times)

Unbuckled

Above 10 km/h

(6 mph)

↓

Below 5 km/h

(3 mph)

6 seconds *1

↓

Stop *2


183

The seat belt automatically adjusts tothe proper length only after the lapbelt portion is adjusted manually sothat it fits snugly around your hips. Ifyou lean forward in a slow, easymotion, the belt will extend and letyou move around. If there is a sud-den stop or impact, however, the beltwill lock into position. It will also lockif you try to lean forward too quickly.If you are unable to pull out the seatbelt from the retractor, firmly pull thebelt out and release it. Then you willbe able to pull the belt out smoothly.

Height adjustment You can adjust the height of theshoulder belt anchor to one of the 4positions for maximum comfort andsafety.The height of the adjusting seat beltshould not be too close to your neck.The shoulder portion should beadjusted so that it lies across yourchest and midway over your shouldernearest the door and not your neck.To adjust the height of the seat beltanchor, lower or raise the heightadjuster into an appropriate position.

To raise the height adjuster, pull it up(1). To lower it, push it down (3) whilepressing the height adjuster button (2).Release the button to lock the anchorinto position. Try sliding the heightadjuster to make sure that it haslocked into position.

WARNING - Shoulder beltpositioning

Never position the shoulder beltacross your neck or face.

WARNING - Seat beltreplacement

Replace your seat belts afterbeing in an accident. Failure toreplace seat belts after an acci-dent could leave you with dam-aged seat belts that will not pro-vide protection in the event ofanother collision.

OMG035038

3 19


You should place the lap belt portionas low as possible and snugly acrossyour hips. If the lap belt is located toohigh on your waist, it may increasethe chance of injury in the event of acollision.The arm closest to the seat beltbuckle should be over the belt whilethe other arm should be under thebelt as shown in the illustration.

Seat belts - Front passenger andrear seat 3-point system withcombination locking retractorTo fasten your seat beltCombination retractor type seat beltsare installed in the rear seat posi-tions to help accommodate theinstallation of child restraint systems.Although a combination retractor isalso installed in the front passengerseat position, it is strongly recom-mended that children always beseated in the rear seat. NEVERplace an infant restraint system inthe front seat of the vehicle.This type of seat belt combines thefeatures of both an emergency lock-ing retractor seat belt and an auto-matic locking retractor seat belt. Tofasten your seat belt, pull it out of theretractor and insert the metal tab intothe buckle. There will be an audible"click" when the tab locks into thebuckle. When not securing a childrestraint, the seat belt operates in thesame way as the driver's seat belt(Emergency Locking Retractor Type).

It automatically adjusts to the properlength only after the lap belt portionof the seat belt is adjusted manuallyso that it fits snugly around your hips.When the seat belt is fully extendedfrom the retractor to allow the instal-lation of a child restraint system, theseat belt operation changes to allowthe belt to retract, but not to extend(Automatic Locking Retractor Type).Refer to “Using a child restraint sys-tem” in this section.To convert from the automatic lock-ing feature to the emergency lockingoperation mode, allow the unbuckledseat belt to fully retract.

B200A01NF


203

When using the rear center seat belt,the buckle with the “CENTER” markmust be used.

To release the seat belt The seat belt is released by pressingthe release button (1) of the lockingbuckle. When it is released, the beltshould automatically draw back intothe retractor.If this does not happen, check thebelt to be sure it is not twisted, thentry again.

Pre-tensioner seat belt

Your vehicle is equipped with driver'sand front passenger's pre-tensionerseat belts.1. Retractor pre-tensionerThe retractor pre-tensioner, which isa supplement system of the seatbelts. The purpose of the retractorpre-tensioner is to tighten the shoul-der belt against the occupant's upperbody in certain frontal collisions.

OYDDSA2021 B210A01NF-1

OXMA033101

3 21


2. Emergency Fastening Device(EFD)

The Emergency Fastening Device(EFD) is a supplemental system ofthe seat belts. The purpose of theEFD is to tighten the lap belt againstthe occupant's pelvis in certainfrontal collisions.

The pre-tensioner seat belts may beactivated, when a frontal collision issevere enough, together with the airbags.When the vehicle stops suddenly, orif the occupant tries to lean forwardtoo quickly, the seat belt retractormay lock into position. In certainfrontal collisions (or side collisions),the pre-tensioner may activate andpull the seat belt into tighter contactagainst the occupant's body.If the system senses excessive ten-sion on the driver or passenger'sseat belt when the pre-tensioner acti-vates, the load limiter inside theretractor pre-tensioner will releasesome of the pressure on the affectedseat belt.

The seat belt pre-tensioner systemconsists mainly of the following com-ponents.Their locations are shown inthe illustration:1. SRS air bag warning light2. Retractor pre-tensioner assembly3. SRS control module4. Emergency fastening device (EFD)

WARNING• Do not put anything near the

buckle. Placing objects nearthe buckle may increase therisk of personal injury in theevent of a collision.

• For your safety, be sure thatthe belt webbing is not looseor twisted and always sitproperly on your seat.

ODMESA2024


223

✽✽ NOTICEWhen the pre-tensioner seat beltsare activated, a loud noise may beheard and fine dust, which mayappear to be smoke, may be visiblein the passenger compartment.These are normal operating condi-tions and are not hazardous.

Because the sensor that activates theSRS air bag is connected with thepre-tensioner seat belt, the SRS airbag warning light ( ) on the instru-ment panel will illuminate for approxi-mately 6 seconds after the ignitionswitch has been turned to the ONposition, and then it should turn off.If the pre-tensioner seat belt doesnot work properly, this warning lightwill illuminate even if the SRS air baghas not malfunctioned. If the SRS airbag warning light does not illuminatewhen the ignition switch is turnedON, or if it remains illuminated afterilluminating for approximately 6 sec-onds, or if it illuminates while thevehicle is being driven, please havean authorized Kia dealer inspect thepre-tensioner seat belt or SRS airbag system as soon as possible.

✽✽ NOTICEDo not attempt to service or repairthe pre-tensioner seat belt system inany manner. Do not attempt toinspect or replace the pre-tensionerseat belts yourself. This must bedone by an authorized Kia dealer.

WARNINGTo obtain maximum benefitfrom a pre-tensioner seat belt:1. The seat belt must be worn

correctly and adjusted to theproper position. Please readand follow all of the importantinformation and precautionsabout your vehicle’s occupantsafety features – includingseat belts and air bags – thatare provided in this manual.

2. Be sure you and your passen-gers always wear seat beltsproperly.

WARNING - Skin irritationWash all exposed skin areasthoroughly after an accident inwhich the pre-tensioner seatbelts were activated. The finedust from the pre-tensioneractivation may cause skin irrita-tion and should not be breathedfor prolonged periods.

3 23


Pre-tensioners are designed to oper-ate only one time. After activation,pre-tensioner seat belts must bereplaced. If the pre-tensioner mustbe replaced, contact an authorizedKia dealer.

Seat belt precautionsInfant or small childYou should be aware of the specificrequirements in your country. Childand/or infant seats must be properlyplaced and installed in the rear seat.For more information about the useof these restraints, refer to “Childrestraint system” in this section.

Larger childrenChildren who are too large for childrestraint systems should always occu-py the rear seat and use the availablelap/shoulder belts. The lap portionshould be fastened snug on the hipsand as low as possible. Periodicallycheck belt fit. A child's squirming couldput the belt out of position. Childrenare given the most safety in the eventof an accident when they arerestrained by a proper restraint systemin the rear seat. If a larger child (overage 12) must be seated in the frontseat, the child should be securelyrestrained by the available lap/shoul-der belt and the seat should be placedin the rearmost position. Children age12 and under should be restrainedsecurely in the rear seat. NEVERplace a child age 12 and under in thefront seat. NEVER place a rear facingchild seat in the front seat of a vehicle.If the shoulder belt portion slightlytouches the child’s neck or face, tryplacing the child closer to the center ofthe vehicle. If the shoulder belt stilltouches their face or neck they need tobe returned to a child restraint system.

WARNING - Hot pre - tensioner

Do not touch the pre-tensionerseat belt assemblies for severalminutes after they have beenactivated. When the pre-ten-sioner seat belt mechanismfires during a collision the pre-tensioner becomes hot and canburn you.


243

Restraint of pregnant women Pregnant women should wearlap/shoulder belt assemblies when-ever possible according to specificrecommendations by their doctors.The lap portion of the belt should beworn AS SNUGLY AND LOW ASPOSSIBLE on the hips, not acrossthe abdomen.

Injured personA seat belt should be used when aninjured person is being transported.When this is necessary, you shouldconsult a physician for recommenda-tions.

One person per beltTwo people (including children)should never attempt to use a singleseat belt. This could increase theseverity of injuries in case of an acci-dent.

Do not lie downTo reduce the chance of injuries in theevent of an accident and to achievemaximum effectiveness of therestraint system, all passengersshould be sitting up and the frontseats should be in an upright positionwhen the vehicle is moving. A seatbelt cannot provide proper protectionif the person is lying down in the rearseat or if the front seat is in a reclinedposition.

WARNING - Small chil-dren

Do not allow small children toride in the vehicle without anappropriate child restraint sys-tem.

WARNING - Pregnantwomen

Pregnant women must neverplace the lap portion of the seatbelt above or on the abdomenwhere the fetus is located. Theforce of the seat belt during acollision will crush the fetus.

3 25


Care of seat beltsSeat belt systems should never bedisassembled or modified. In addi-tion, care should be taken to assurethat seat belts and belt hardware arenot damaged by seat hinges, doorsor other abuse.

Periodic inspectionAll seat belts should be inspectedperiodically for wear or damage ofany kind. Any damaged parts shouldbe replaced as soon as possible.

Keep belts clean and drySeat belts should be kept clean anddry. If belts become dirty, they can becleaned by using a mild soap solu-tion and warm water. Bleach, dye,strong detergents or abrasivesshould not be used because theymay damage and weaken the fabric.

When to replace seat beltsThe entire in-use seat belt assemblyor assemblies should be replaced ifthe vehicle has been involved in anaccident. This should be done even ifno damage is visible. Additionalquestions concerning seat belt oper-ation should be directed to anauthorized Kia dealer.


263

CHILD RESTRAINT SYSTEMChildren riding in the car should sit inthe rear seat and must always beproperly restrained to minimize therisk of injury in an accident, suddenstop or sudden maneuver. Accordingto accident statistics, children aresafer when properly restrained in therear seats than in the front seat.Larger children not in a child restraintshould use one of the seat belts pro-vided.You should be aware of the specificrequirements in your country. Childand/or infant safety seats must beproperly placed and installed in therear seat. You must use a commer-cially available child restraint systemthat meets the requirements of thesafety standards of your country.Child restraint systems are designedto be secured in vehicle seats byseat belt, or by a tether anchorand/or LATCH anchors (if equipped).

Children could be injured or killed ina crash if their restraints are notproperly secured. For small childrenand babies, a child seat or infant seatmust be used. Before buying a par-ticular child restraint system, makesure it fits your car seat and seatbelts, and fits your child. Follow allthe instructions provided by the man-ufacturer when installing the childrestraint system.

When the child restraint system is notin use, store it in the luggage area orfasten it with a seat belt so that it willnot be thrown forward in case of asudden stop or an accident.

WARNING- Restraint location

Never install a child or infantseat on the front passenger'sseat.A child riding in the front pas-senger seat can be forcefullystruck by an inflating air bag.

WARNING- Hot childrestraint

A child restraint system canbecome very hot if it is left in aclosed vehicle on a sunny day.Be sure to check the seat cover,buckles and latches beforeplacing a child in the restraintsystem.

3 27


Using a child restraint system

For small children and babies, theuse of a child seat or infant seat isrequired. This child seat or infantseat should be of appropriate size forthe child and should be installed inaccordance with the manufacturer'sinstructions.

For safety reasons, we recommendthat the child restraint system beused in the rear seats.Since all passenger seat belts movefreely under normal conditions andonly lock under extreme or emer-gency conditions (emergency lockmode), you must manually changethese seat belts to the auto lockmode to secure a child restraint.If the seat belt does not operate asdescribed in this section, have thesystem checked immediately by yourauthorized Kia dealer.

WARNING - Holding children

Never hold a child in your armsor lap when riding in a vehicle.The violent forces created dur-ing a crash will tear the childfrom your arms and throw thechild against the car’s interior.Always use a child restraintsystem which is appropriate foryour child's height and weight.

WARNING - Seat belt useDo not use one seat belt for twooccupants at the same time.This will eliminate any safetybenefit provided by the seat beltto the occupants.

CRS09

OTQ037038

Rear- facing child restraint system

Forward-facing child restraint system


283

Placing a passenger seat beltinto the auto lock mode

The auto lock mode will help preventthe normal movement of the child inthe vehicle from causing the seat beltto loosen and compromise the childrestraint system. To secure a childrestraint system, use the followingprocedure.

To install a child restraint system onthe outboard or center rear seats, dothe following:1. Place the child restraint system in

the seat and route the lap/shoul-der belt around or through therestraint, following the restraintmanufacturer’s instructions. Besure the seat belt webbing is nottwisted.

2. Fasten the lap/shoulder belt latchinto the buckle. Listen for the dis-tinct “click” sound.

Position the release button so that itis easy to access in case of an emer-gency.

WARNING - Child seatinstallation

• Always follow the instructionsprovided by the child restraintsystem manufacturer. Childrestraint system manufactur-ers know their products best.

• Failure to observe this manu-al's instructions regardingchild restraint system and theinstructions provided with thechild restraint system couldresult in the improper installa-tion of the child restraint sys-tem which may reduce theprotection to your child in acrash or a sudden stop.

E2MS103005

OEN036101

3 29


3. Pull the shoulder portion of theseat belt all the way out. When theshoulder portion of the seat belt isfully extended, it will shift theretractor to the “Auto Lock” (childrestraint) mode.

4. Slowly allow the shoulder portionof the seat belt to retract and listenfor an audible “clicking” or “ratchet-ing” sound. This indicates that theretractor is in the “Auto Lock”mode. If no distinct sound isheard, repeat steps 3 and 4.

5. Remove as much slack from thebelt as possible by pushing downon the child restraint system whilefeeding the shoulder belt back intothe retractor.

6. Push and pull on the child restraintsystem to confirm that the seat beltis holding it firmly in place. If it isnot, release the seat belt andrepeat steps 2 through 6.

7. Double check that the retractor is inthe “Auto Lock” mode by attemptingto pull more of the seat belt out ofthe retractor. If you cannot, theretractor is in the “Auto Lock” mode.

OEN036102 OEN036103 OEN036104


303

The lap/shoulder belt automaticallyreturns to the “emergency lockmode” whenever the belt is allowedto retract fully.Therefore, the preceding sevensteps must be followed each time achild restraint is installed.To remove the child restraint, pressthe release button on the buckle andthen pull the lap/shoulder belt out ofthe restraint and allow the seat beltto retract fully.

Securing a child restraint seatwith tether anchorage system

Child restraint hook holders arelocated on the package tray.

This symbol indicates theposition of the tetheranchor.

1.Route the child restraint seat teth-er strap over the seatback.For vehicles with adjustable head-rests, route the tether strap underthe headrest (remove the headrestand the re-install it) and betweenthe headrest posts, otherwiseroute the tether strap over the topof the seatback.

WARNING - Auto lockmode

Set the retractor to AutomaticLock mode when installing anychild restraint system.If the retractor is not in the AutoLock mode, the child restraintcan move when your vehicleturns or stops suddenly.

OYDESA2022R

OTF030030N

3 31


2. Connect the tether strap hook tothe appropriate child restrainthook holder and tighten to securethe child restraint seat.

Check that the child restraint systemis secure by pushing and pulling it indifferent directions. Incorrectly fittedchild restraints may swing, twist, tipor separate causing death or seriousinjury.

Securing a child restraint seat withchild seat lower anchor system

Some child seat manufacturersmake child restraint seats that arelabeled as LATCH or LATCH-com-patible child restraint seats. LATCHstands for "Lower Anchors andTethers for Children". These seatsinclude two rigid or webbing mount-ed attachments that connect to twoLATCH anchors at specific seatingpositions in your vehicle. This type ofchild restraint seat eliminates theneed to use seat belts to attach thechild seat in the rear seats.

Child restraint symbols are locatedon the left and right rear seat backsto indicate the position of the loweranchors for child restraints.

WARNING - Tether strapNever mount more than onechild restraint to a single tetheror to a single lower anchoragepoint. The increased loadcaused by multiple seats maycause the tethers or anchoragepoints to break.

B230D01NF

OTF030031N

Lower AnchorPosition Indicator

Lower Anchor

WARNING - Unused rearseatbelts

Always fasten the seatbeltsbehind the child restraint seatwhen they are not used tosecure the child seat. Failure todo so may result in child stran-gulation.


323

WARNING - LATCH loweranchors

Never attempt to attach aLATCH equipped seat in thecenter seating position. LATCHlower anchors are only to beused with the left and right rearoutboard seating positions. Youmay damage the anchors or theanchors may fail and break in acollision.

LATCH anchors have been providedin your vehicle. The LATCH anchorsare located in the left and right out-board rear seating positions. Theirlocations are shown in the illustra-tion. There is no LATCH anchor pro-vided for the center rear seatingposition.The LATCH anchors are locatedbetween the seatback and the seatcushion of the rear seat left and rightoutboard seating positions.When you install your child's restraintsystem using the LATCH anchorsbuckle the shoulder lap belt, thenlock the retractor and pull the belt toremove the slack in the belt so it liesflat against the vehicle seat.

Follow the child seat manufacturer’sinstructions to properly install childrestraint seats with LATCH orLATCH-compatible attachments.Once you have installed the LATCHchild restraint, assure that the seat isproperly attached to the LATCH andtether anchors.Also, test the child restraint seatbefore you place the child in it. Tiltthe seat from side to side. Also try totug the seat forward. Check to see ifthe anchors hold the seat in place.

OTD039037N

3 33


(1) Driver’s front air bag(2) Passenger’s front air bag(3) Side air bag(4) Curtain air bag

Even in vehicles with air bags, youand your passengers must alwayswear the safety belts provided inorder to minimize the risk and sever-ity of injury in the event of a collisionor rollover.

AIR BAG - ADVANCED SUPPLEMENTAL RESTRAINT SYSTEM

OYDESA2024CN

❈ The actual air bags in the vehicle may differ from the illustration.


343

How does the air bag systemoperate • Air bags are activated (able to

inflate if necessary) only when theignition switch is turned to the ONor START the appropriate position.

• Air bags inflate instantly in theevent of serious frontal or side col-lision (if equipped with side air bagor curtain air bag) in order to helpprotect the occupants from seriousphysical injury.

• There is no single speed at whichthe air bags will inflate.Generally, air bags are designed toinflate based upon the severity of acollision and its direction. Thesetwo factors determine whether thesensors produce an electronicdeployment/ inflation signal.

• Air bag deployment depends on anumber of complex factors includ-ing vehicle speed, angles of impactand the density and stiffness of thevehicles or objects which yourvehicle hits in the collision.Though,factors are not limited to thosementioned above.

• The front air bags will completelyinflate and deflate in an instant.It is virtually impossible for you tosee the air bags inflate during anaccident. It is much more likely thatyou will simply see the deflated airbags hanging out of their storagecompartments after the collision.

• In order to help provide protectionin a severe collision, the air bagsmust inflate rapidly. The speed ofair bag inflation is a consequenceof extremely short time in which acollision occurs and the need toget the air bag between the occu-pant and the vehicle structuresbefore the occupant impacts thosestructures. This speed of inflationreduces the risk of serious or life-threatening injuries in a severe col-lision and is thus a necessary partof air bag design.However, air bag inflation can alsocause injuries which can includefacial abrasions, bruises and bro-ken bones because the inflationspeed also causes the air bags toexpand with a great deal of force.

• There are even circumstancesunder which contact with thesteering wheel air bag can causefatal injuries, especially if theoccupant is positioned exces-sively close to the steeringwheel.

3 35


Noise and smokeWhen the air bags inflate, they makea loud noise and they leave smokeand powder in the air inside of thevehicle. This is normal and is a resultof the ignition of the air bag inflator.After the air bag inflates, you mayfeel substantial discomfort in breath-ing due to the contact of your chestto both the seat belt and the air bag,as well as from breathing the smokeand powder. Open your doorsand/or windows as soon as possi-ble after the impact in order toreduce discomfort and preventprolonged exposure to smoke andpowder.Though smoke and powder are non-toxic,They may cause irritation to theskin (eyes,nose and throat, etc). Ifthis is the case, wash and rinse withcold water immediately and consult adoctor if the symptom persists.

Installing a child restraint on afront passenger’s seat is forbidden

Never place a rear-facing childrestraint in the front passenger’sseat. If the air bag deploys, it wouldimpact the rear-facing child restraint,causing serious or fatal injury.In addition, do not place front-facingchild restraint in the front passen-ger’s seat either. If the front passen-ger air bag inflates, it would causeserious or fatal injuries to the child.

1JBH3051

WARNING - Hot components

Do not touch the air bag storagearea's internal componentsimmediately after air bag infla-tion. The air bag related parts inthe steering wheel, instrumentpanel and the roof rails abovethe front and rear doors arevery hot. Hot components canresult in burn injuries.


363

Air bag warning light

The purpose of the air bag warninglight in your instrument panel is toalert you of a potential problem withyour air bag - Supplemental RestraintSystem (SRS).When the ignition switch is turnedON, the indicator light should illumi-nate for approximately 6 seconds,then go off.

Have the system checked by anauthorized Kia dealer if:• The light does not turn on briefly

when you turn the ignition ON.• The light stays on after illuminating

for approximately 6 seconds.• The light comes on while the vehi-

cle is in motion.

W7-147

WARNING - Air bagdeployment

When children are seated in therear outboard seats of a vehicleequipped with side and/or cur-tain air bags, install the childrestraint system as far awayfrom the door side as possible.Inflation of the side and/or cur-tain air bags could impact thechild.

3 37


SRS components and func-tions

The SRS consists of the followingcomponents:1. Driver's front air bag module2. Passenger's front air bag module3. Side air bag modules4. Curtain air bag modules5. Retractor pre-tensioner assem-

blies*6. Air bag warning light7. SRS control module (SRSCM)8. Front impact sensors9. Side impact sensors

10. PASSENGER AIR BAG “OFF”indicator (Front passenger’s seatonly)

11. Occupant detection system (Front passenger’s seat only)

12. Driver’s and front passenger’sseat belt buckle sensors

13. Emergency fastening device(EFD)

* : if equipped

The SRSCM continually monitors allSRS components while the ignitionswitch is ON to determine if a crashimpact is severe enough to requireair bag deployment or pre-tensionerseat belt deployment.The SRS air bag warning light on theinstrument panel will illuminate forabout 6 seconds after the ignitionswitch is turned to the ON position,after which the air bag warning lightshould go out.If any of the following conditionsoccurs, this indicates a malfunctionof the SRS. Have an authorized Kiadealer inspect the air bag system assoon as possible.

• The light does not turn on brieflywhen you turn the ignition ON.

• The light stays on after illuminatingfor approximately 6 seconds.

• The light comes on while the vehi-cle is in motion.

OTF032049N


383

The air bag modules are locatedboth in the center of the steeringwheel and in the front passenger'spanel above the glove box. When theSRSCM detects a sufficiently severeimpact to the front of the vehicle, itwill automatically deploy the front airbags.

Upon deployment, tear seams mold-ed directly into the pad covers willseparate under pressure from theexpansion of the air bags. Furtheropening of the covers then allows fullinflation of the air bags.

A fully inflated air bag, in combina-tion with a properly worn seat belt,slows the driver's or the passenger'sforward motion, reducing the risk ofhead and chest injury.

After complete inflation, the air bagimmediately starts deflating,enabling the driver to maintain for-ward visibility and the ability to steeror operate other controls.

B240B01L

Driver’s front air bag (1)

B240B02L


B240B03L


3 39


✽✽ NOTICEBefore you replace a fuse or discon-nect a battery terminal, turn the igni-tion switch to the LOCK positionand remove the ignition key. Neverremove or replace the air bag relatedfuse(s) when the ignition switch is inthe ON position. Failure to heed thiswarning will cause the SRS air bagwarning light to illuminate.

Occupant detection system

Your vehicle is equipped with an occu-pant detection system in the frontpassenger's seat.The occupant detection system isdesigned to detect the presence of aproperly-seated front passenger anddetermine if the passenger's front airbag should be enabled (may inflate)or not. The driver's front air bag is notaffected or controlled by the occu-pant detection system.

B240B05L

Passenger’s front air bag

WARNING - Air bagobstructions

Do not install or place anyaccessories on the steeringwheel, instrument panel, or onthe front passenger's panelabove the glove box in a vehicleSuch objects may become dan-gerous projectiles if the air bagdeploys.

OYDNSA2037


403

Main components of occupantdetection system• A detection device located within

the front passenger seat track.• Electronic system to determine

whether passenger air bag sys-tems should be activated or deac-tivated.

• An indicator light located on theinstrument panel which illuminatesthe words PASSENGER AIR BAG“OFF” indicating the front passen-ger air bag system is deactivated.

• The instrument panel air bag warn-ing light is interconnected with theoccupant detection system.

If the front passenger seat is occupiedby a person that the system deter-mines to be of adult size, and he/shesits properly (sitting upright with theseatback in an upright position, cen-tered on the seat cushion with theirseat belt on, legs comfortably extend-ed and their feet on the floor), thePASSENGER AIR BAG “OFF” indica-tor will turn off and the front passen-ger's air bag will be able to inflate, ifnecessary, in frontal crashes.You will find the PASSENGER AIRBAG “OFF” indicator on the centerfacia panel. This system detects theconditions 1~4 in the following tableand activates or deactivates the frontpassenger air bag based on theseconditions.Always be sure that you and all vehi-cle occupants are seated andrestrained properly (sitting uprightwith the seat in an upright position,centered on the seat cushion, with theperson’s legs comfortably extended,feet on the floor, and wearing thesafety belt properly) for the mosteffective protection by the air bag andthe safety belt.

• The ODS (Occupant DetectionSystem) may not function properly ifthe passenger takes actions whichcan defeat the detection system.These include:

(1) Failing to sit in an upright position.(2) Leaning against the door or cen-

ter console.(3) Sitting towards the sides or the

front of the seat.(4) Putting legs on the dashboard or

resting them on other locationswhich reduce the passengerweight on the front seat.

(5) Improperly wearing the safety belt.(6) Reclining the seat back.

3 41


WARNING - ODS systemRiding in an improper positionadversely affects the occupantdetection system (ODS) andmay result in the deactivation offront passenger air bag. It isimportant for the driver toinstruct the passenger as to theproper seating instructions ascontained in this manual.

(Continued)

Condition and operation in the front passenger occupant detectionsystem

*1) The system judges a person of adult size as an adult. When a smaller adult sits inthe front passenger seat, the system may recognize him/her as a child dependingon his/her physique and posture.

*2) Do not allow children to ride in the front passenger seat. When a smaller child thanthe same age sits in the front passenger seat, the system may recognize him/heras an infant depending on his/her physique or posture.

*3) Never install a child restraint system on the front passenger seat.

*4) The PASSENGER AIR BAG "OFF" indicator may turn on or off when a child above12 months to 12 years old (with or without child restraint system) sits in the frontpassenger seat. This is a normal condition.

Condition detected by the occupantdetection system

1. Adult *1 or child age 13 and up*2

2. Infant or child restraint system

with 12 months old*3 *4

3. Unoccupied

4. Malfunction in the system

Off

On

On

Off

Off

Off

Off

On

Activated

Deactivated

Deactivated

Activated

PASSENGER AIRBAG “OFF” indica-

tor light

SRS warninglight

Front passengerair bag

Indicator/Warning light Devices


423

1KMN3663

1KMN3664

1KMN3665

- Never sit with the hips shiftedtowards the front of the seat.

- Never lean on the door or cen-ter console.

- Never sit on one side of thefront passenger seat.

- Never place the feet on thedashboard.

B990A08O

1KMN3662

- Never put a heavy load in thefront passenger seat.

- Never excessively recline thefront passenger seatback.

OVQ036014N

- Never place the feet on thefront passenger seatback.

(Continued)

3 43


When an adult is seated in the frontpassenger seat, if the PASSENGERAIR BAG “OFF” indicator is on, turnthe ignition switch to the LOCK posi-tion and ask the passenger to sitproperly (sitting upright with the seatback in an upright position, centeredon the seat cushion with their seatbelt on, legs comfortably extendedand their feet on the floor). Restartthe engine and have the personremain in that position. This will allowthe system to detect the person andto enable the passenger air bag.

If the PASSENGER AIR BAG “OFF”indicator is still on, ask the passen-ger to move to the rear seat.

✽✽ NOTICEThe PASSENGER AIR BAG “OFF”indicator illuminates for about 4 sec-onds after the ignition switch isturned to the ON position or afterthe engine is started. If the frontpassenger seat is occupied, the occu-pant detection sensor will then clas-sify the front passenger after severalmore seconds.

B990A01O

WARNING - “AIR BAGOFF” light

Do not allow an adult passengerto ride in the front seat when thePASSENGER AIR BAG “OFF”indicator is illuminated, becausethe air bag will not deploy in theevent of a crash. The driver mustinstruct the passenger to reposi-tion himself in the seat. Failureto properly position yourselfmay lead to air bag deactivationresulting in air bag non-deploy-ment and in a collision. If thePASSENGER AIR BAG “OFF”indicator remains illuminatedafter the passenger repositionsthemselves properly and the caris restarted, it is recommendedthat passenger move to the rearseat because the passenger'sfront air bag will not deploy.


443

Any child age 12 and under shouldride in the rear seat. Children toolarge for child restraints should usethe available lap/shoulder belts. Nomatter what type of crash, children ofall ages are safer when restrained inthe rear seat.

✽✽ NOTICEDo not modify or replace the frontpassenger seat. Don't place anythingon or attach anything such as a blan-ket, front seat covers or after marketseat heater to the front passengerseat. This can adversely affect theoccupant detection system.

If the occupant detection system isnot working properly, the SRS airbag warning light on the instru-ment panel will illuminate becausethe passenger's front air bag is con-nected with the occupant detectionsystem. If there is a malfunction ofthe occupant detection system, thePASSENGER AIR BAG “OFF” indi-cator will not illuminate and the pas-senger's front air bag will inflate infrontal impact crashes even if there isno occupant in the front passenger'sseat.

Driver's and passenger's frontair bag

Your vehicle is equipped with anAdvanced Supplemental Restraint(Air Bag) System and lap/shoulderbelts at both the driver and passen-ger seating position.

OYDDSA2025

OYDDSA2026

Driver’s front air bag

Passenger’s front air bag

3 45


The indications of the system's pres-ence are the letters "AIR BAG"embossed on the air bag pad coverin the steering wheel and the pas-senger's side front panel pad abovethe glove box.

The SRS consists of air bagsinstalled under the pad covers in thecenter of the steering wheel and thepassenger's side front panel abovethe glove box.The purpose of the SRS is to providethe vehicle's driver and/or the frontpassenger with additional protectionthan that offered by the seat belt sys-tem alone in case of a frontal impactof sufficient severity. The SRS usessensors to gather information aboutthe driver's seat position, the driver'sand front passenger's seat beltusage and impact severity.

The advanced SRS offers the abilityto control the air bag inflation withtwo levels. A first stage level is pro-vided for moderate-severity impacts.A second stage level is provided formore severe impacts.

The passenger’s front air bag isdesigned to help reduce the injury ofchildren sitting close to the instru-ment panel in low speed collisions.However, children are safer if theyare restraint in the rear seat.

According to the impact severity,seating position and seat belt usage,the SRSCM (SRS Control Module)controls the air bag inflation. Failureto properly wear seat belts canincrease the risk or severity of injuryin an accident.

Additionally, your vehicle is equippedwith an occupant detection system inthe front passenger's seat. The occu-pant detection system detects thepresence of a passenger in the frontpassenger's seat and will turn off thefront passenger's air bag under cer-tain conditions. For more detail, see"Occupant detection system" in thissection.Do not place any objects that maycause magnetic fields near the frontseat.These may cause a malfunctionof the seat track position sensor.


463

1JBB3520

1JBA3514

1JBA3522

Side impact

Rear impact

Rollover

Manufacturers are required by gov-ernment regulations to provide acontact point concerning modifica-tions to the vehicle for persons withdisabilities, which modifications mayaffect the vehicle’s advanced air bagsystem. However, Kia does notendorse nor will it support anychanges to any part or structure ofthe vehicle that could affect theadvanced air bag system, includingthe occupant detection system.

Advanced air bags are combinedwith pre-tensioner seat belts to helpprovide enhanced occupant protec-tion in frontal crashes. Front air bagsare not intended to deploy in colli-sions in which sufficient protectioncan be provided by the pre-tensionerseat belt alone.

Front air bags are not intended todeploy in side-impact, rear-impact orrollover crashes. In addition, front airbags will not deploy in frontal crash-es below the deployment threshold.

WARNING - Replacement/modifications

The front passenger seat, dash-board or door should not bereplaced except by an author-ized Kia dealer using originalKia parts designed for this vehi-cle and model. Any other suchreplacement or modificationcould adversely affect the oper-ation of the occupant detectionsystem and your advanced airbags.

WARNING - SRS WiringDo not tamper with or discon-nect SRS wiring or other com-ponents of the SRS system.Doing so could result in injury,due to accidental deployment ofthe air bags or by rendering theSRS inoperative.

3 47


Side air bag

❈ The actual air bags in the vehicle may differfrom the illustration.

Your vehicle is equipped with a sideair bag in each front seat.

The purpose of the air bag is to pro-vide the vehicle's driver and/or thefront passenger with additional pro-tection than that offered by the seatbelt alone.The side air bags are designed todeploy only during certain side-impact collisions, depending on thecrash severity, angle, speed andpoint of impact. The side air bags arenot designed to deploy in all sideimpact situations.

The side air bag is supplemental tothe driver's and the passenger's seatbelt systems and is not a substitutefor them. Therefore your seat beltsmust be worn at all times while thevehicle is in operation.For best protection from the side airbag system and to avoid beinginjured by the deploying side air bag,both front seat occupants should sitin an upright position with the seatbelt properly fastened. The driver'shands should be placed on the steer-ing wheel at the 9:00 and 3:00 posi-tions. The passenger's arms andhands should be placed on their laps.

WARNING - Unexpecteddeployment

Avoid impact to the side air bagsensor when the ignition switchis ON to prevent unexpecteddeployment of the side air bag.

OYDDSA2027

OYDDSA2037

Front

WARNING - DeploymentDo not install any accessoriesincluding seat covers, on theside or near the side air bag asthis may affect the deploymentof the side air bags.


483

If seat or seat cover is damaged,have the vehicle checked andrepaired by an authorized Kia dealer.Inform that your vehicle is equippedwith side air bags and an occupantdetection system.

Curtain air bag


Curtain air bags are located alongboth sides of the roof rails above thefront and rear doors.

They are designed to help protectthe heads of the front seat occupantsand the rear outboard seat occu-pants in certain side impact colli-sions.The curtain air bags are designed todeploy only during certain sideimpact collisions, depending on thecrash severity, angle, speed andimpact. The curtain air bags are notdesigned to deploy in all side impactsituations, collisions from the front orrear of the vehicle or in most rolloversituations.Do not allow the passengers to leantheir heads or bodies onto doors, puttheir arms on the doors, stretch theirarms out of the window, or placeobjects between the doors and pas-sengers when they are seated onseats equipped with side and/or cur-tain air bags.

✽✽ NOTICENever try to open or repair any com-ponents of the side curtain air bagsystem. This should only be done byan authorized Kia dealer.

WARNING - Flyingobjects

Do not place any objects (anumbrella, bag, etc.) between thefront door and the front seat.Such objects may become dan-gerous projectiles if the side airbag inflates.

OYDDSA2039

OYDDSA2038

3 49


Why didn’t my air bag go off ina collision? (Inflation and non-inflation conditions of the airbag)There are many types of accidentsin which the air bag would not beexpected to provide additionalprotection.These include rear impacts, sec-ond or third collisions in multipleimpact accidents, as well as lowspeed impacts.

Air bag collision sensors

(1) SRS control module(2) Front impact sensor

(3) Side impact sensor

OYDDSA2028/OYDDSA2029/OYDDSA2030/OYDDSA2031

1 2 3


503

Problems may arise if the sensorinstallation angles are changed dueto the deformation of the frontbumper, body or B pillar where sidecollision sensors are installed. Havethe vehicle checked and repaired byan authorized Kia dealer.Installing aftermarket bumper guardsor replacing a bumper with non-gen-uine parts may adversely affect yourvehicle’s collision and air bag deploy-ment performance.

Air bag inflation conditions

Front air bags Front air bags are designed to inflatein a frontal collision depending onthe intensity, speed or angles ofimpact of the front collision.

WARNING - Air bag sensors

• Do not hit or allow any objectsto impact the locations whereair bag or sensors areinstalled.This may cause unexpectedair bag deployment, whichcould result in serious per-sonal injury or death.

• If the installation location orangle of the sensors is alteredin any way, the air bags maydeploy when they should notor they may not deploy whenthey should.Therefore, do not try to per-form maintenance on oraround the air bag sensors.Have the vehicle checked andrepaired by an authorized Kiadealer.

1JBA3513

3 51



Side air bagsSide air bags (side and/or curtain airbags) are designed to inflate when animpact is detected by side collisionsensors depending on the strength,speed or angles of impact resultingfrom a side impact collision.

Although the front air bags (driver’sand front passenger’s air bags) aredesigned to inflate in frontal colli-sions, they also may inflate in othertypes of collisions if the front impactsensors detect a sufficient frontalforce in another type of impact. Sideand curtain air bags are designed toinflate in certain side impact colli-sions. They may inflate in other typeof collisions where a side force isdetected by the sensors.If the vehicle chassis is impacted bybumps or objects on unimprovedroads or sidewalks, air bags maydeploy. Drive carefully on unim-proved roads or on surfaces notdesigned for vehicle traffic to preventunintended air bag deployment.

Air bag non-inflation conditions

• In certain low-speed collisions theair bags may not deploy. The airbags are designed not to deploy insuch cases because they may notprovide benefits beyond the pro-tection of the seat belts in such col-lisions.

1JBA3516

OYDDSA2040

1JBA3515


523

• Air bags are not designed to inflatein rear collisions, because occu-pants are moved backward by theforce of the impact. In this case,inflated air bags would not be ableto provide any additional benefit.

• Front air bags may not inflate inside impact collisions, becauseoccupants move to the direction ofthe collision, and thus in sideimpacts, front air bag deploymentwould not provide additional occu-pant protection.

• In a slant or angled collision, theforce of impact may direct theoccupants in a direction where theair bags would not be able to pro-vide any additional benefit, andthus the sensors may not deployany air bags.

OED036100 1JBA35211JBA3516

3 53


• Just before impact, drivers oftenbrake heavily. Such heavy brakinglowers the front portion of the vehi-cle causing it to “ride” under a vehi-cle with a higher ground clearance.Air bags may not inflate in this"under-ride" situation becausedeceleration forces that are detect-ed by sensors may be significantlyreplaced by such “under-ride” colli-sions.

• Air bags do not inflate in all rolloveraccidents, even though the vehicleis equipped with side air bags andcurtain air bags.

• Air bags may not inflate if the vehi-cle collides with objects such asutility poles or trees, where thepoint of impact is concentrated toone area and the full force of theimpact is not delivered to the sen-sors.

1JBA3517 1JBA3522 1JBA3518


543

SRS CareThe SRS is virtually maintenance-freeand there are no parts you can safelyservice by yourself. If the SRS air bagwarning light does not illuminate, orcontinuously remains on, have yourvehicle immediately inspected by anauthorized Kia dealer.

Any work on the SRS system, suchas removing, installing, repairing, orany work on the steering wheel mustbe performed by an authorized Kiadealer. Improper handling of the SRSsystem may result in serious person-al injury.

For cleaning the air bag pad covers,use only a soft, dry cloth or onewhich has been moistened with plainwater. Solvents or cleaners couldadversely affect the air bag coversand proper deployment of the sys-tem.

If components of the air bag systemmust be discarded, or if the vehiclemust be scrapped, certain safetyprecautions must be observed. Anauthorized Kia dealer knows theseprecautions and can give you thenecessary information. Failure to fol-low these precautions and proce-dures could increase the risk of per-sonal injury.

Adding equipment to or modi-fying your air bag-equippedvehicleIf you modify your vehicle by chang-ing your vehicle's frame, bumper sys-tem, front end or side sheet metal orride height, this may affect the oper-ation of your vehicle's air bag sys-tem.

WARNING - Tamperingwith SRS

Do not tamper with or discon-nect SRS wiring, or other com-ponents of the SRS system.Doing so could result in theaccidental inflation of the airbags or by rendering the SRSinoperative.

3 55


Air bag warning label

Air bag warning labels, somerequired by the Canada MotorVehicle Safety Standards (CMVSS),are attached to the sunvisor to alertthe driver and passengers of poten-tial risks of the air bag system.

OYDNSA2032

OYDNSA2033

Features of your vehicle

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4• Record your key number . . . . . . . . . . . . . . . . . . . . . . . 4-4• Key operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Smart key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6• Smart key function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6• Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Remote keyless entry . . . . . . . . . . . . . . . . . . . . . . . . 4-9• Remote keyless entry system operations. . . . . . . . . . . 4-9• Transmitter precautions . . . . . . . . . . . . . . . . . . . . . . . 4-10• Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11• Immobilizer system . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

Theft-alarm system . . . . . . . . . . . . . . . . . . . . . . . . 4-15• Armed stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15• Theft-alarm stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16• Disarmed stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18• From outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18• From inside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18• Impact sensing door unlock system. . . . . . . . . . . . . . 4-20• Auto door lock/unlock feature . . . . . . . . . . . . . . . . . . 4-20• Speed sensing door lock system . . . . . . . . . . . . . . . . . 4-21• Child-protector rear door lock. . . . . . . . . . . . . . . . . . 4-21

Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22• Opening the trunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22• Closing the trunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

• Emergency trunk safety release. . . . . . . . . . . . . . . . . 4-23Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

• Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

• Opening the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29• Closing the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

Fuel filler lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31• Opening the fuel filler lid . . . . . . . . . . . . . . . . . . . . . . 4-31• Closing the fuel filler lid . . . . . . . . . . . . . . . . . . . . . . . 4-31

Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34• Sunroof open warning. . . . . . . . . . . . . . . . . . . . . . . . . 4-34• Sliding the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35• Tilting the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36• Sunshade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36• Resetting the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . 4-37

Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38• Electronic power steering . . . . . . . . . . . . . . . . . . . . . . 4-38• Tilt & telescopic steering . . . . . . . . . . . . . . . . . . . . . . 4-39• Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39• Heated steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . 4-40• FLEX STEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40

Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43• Inside rearview mirror . . . . . . . . . . . . . . . . . . . . . . . . 4-43• Outside rearview mirror. . . . . . . . . . . . . . . . . . . . . . . 4-48

4

Instrument cluster . . . . . . . . . . . . . . . . . . . . . . . . . 4-52• Instrument Cluster Control . . . . . . . . . . . . . . . . . . . . 4-53• LCD Display Control . . . . . . . . . . . . . . . . . . . . . . . . . 4-54• Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-54• Transaxle Shift Indicator . . . . . . . . . . . . . . . . . . . . . . 4-57

LCD display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58• LCD Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58• Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-59• User Settings Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60• A/V Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63• Turn By Turn Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63• Warning Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-64

Trip computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71• Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71• Fuel Economy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-72• Trip A/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73

Warning and indicator lights . . . . . . . . . . . . . . . . 4-75• Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-75• Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-81

Parking assist system . . . . . . . . . . . . . . . . . . . . . . . 4-86• Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87• Non-operational conditions . . . . . . . . . . . . . . . . . . . . 4-89• Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91

Rearview camera . . . . . . . . . . . . . . . . . . . . . . . . . . 4-92Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93

• Battery saver function. . . . . . . . . . . . . . . . . . . . . . . . . 4-93• Headlamp escort function. . . . . . . . . . . . . . . . . . . . . . 4-93• Daytime running light. . . . . . . . . . . . . . . . . . . . . . . . . 4-94• Lighting control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-94• High - beam operation . . . . . . . . . . . . . . . . . . . . . . . . 4-96• Turn signals and lane change signals . . . . . . . . . . . . 4-97• Front fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-98

Wipers and washers . . . . . . . . . . . . . . . . . . . . . . . . 4-99• Windshield wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-99• Windshield washers. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-99

Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101• Automatict turn off function . . . . . . . . . . . . . . . . . . 4-101• Map lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101• Room lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-102• Trunk room lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103• Glove box lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103• Vanity mirror lamp . . . . . . . . . . . . . . . . . . . . . . . . . . 4-104

Welcome system . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105• Headlamp welcome . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105• Interior light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105• Puddle lamp and pocket lamp . . . . . . . . . . . . . . . . . 4-105

Defroster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106• Rear window defroster . . . . . . . . . . . . . . . . . . . . . . . 4-106

4

• Front wiper deicer. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106Manual climate control system . . . . . . . . . . . . . . 4-107

• Heating and air conditioning . . . . . . . . . . . . . . . . . . 4-108• System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-113• Climate control air filter . . . . . . . . . . . . . . . . . . . . . . 4-115• Refrigerant and compressor lubricant . . . . . . . . . . 4-116

Automatic climate control system. . . . . . . . . . . . 4-117• Automatic heating and air conditioning . . . . . . . . . 4-118• Manual heating and air conditioning . . . . . . . . . . . 4-119• System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-125

Windshield defrosting and defogging. . . . . . . . . 4-127• Manual climate control system . . . . . . . . . . . . . . . . 4-127• Automatic climate control system . . . . . . . . . . . . . . 4-128• Defogging logic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-129

Storage compartment. . . . . . . . . . . . . . . . . . . . . . 4-132• Center console storage . . . . . . . . . . . . . . . . . . . . . . . 4-132• Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-132• Cool box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-133• Sunglass holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-133

Interior features . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135• Cigarette lighter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135• Ashtray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135• Cup holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136• Sliding armrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136• Sunvisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-137

• Seat warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-137• Climate control seat . . . . . . . . . . . . . . . . . . . . . . . . . 4-139• Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-140• LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-141• Clothes hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-142• Floor mat anchor(s). . . . . . . . . . . . . . . . . . . . . . . . . . 4-142• Navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-143

Audio system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-144• Glass antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-144• Steering wheel audio control . . . . . . . . . . . . . . . . . . 4-145• Aux, USB and iPod® port . . . . . . . . . . . . . . . . . . . . . 4-146 4


44

Record your key numberThe key code numberis stamped on the barcode tag attached tothe key set. Shouldyou lose your keys,

this number will enable an author-ized Kia dealer to duplicate the keyseasily. Remove the bar code tag andstore it in a safe place. Also, recordthe code number and keep it in asafe place (not in the vehicle).

Key operations

Type AUsed to start the engine, lock andunlock the doors.

Type BTo unfold the key, press the releasebutton and the key will unfold auto-matically.To fold the key, fold the key manuallywhile pressing the release button.

KEYS

■ Type A

OYDDCO2231/OYDECO2231

WARNING - Aftermarketkeys

Use only Kia original parts forthe ignition key in your vehicle.If an aftermarket key is used, theignition switch may not return toON after START. If this happens,the starter will continue to oper-ate causing possible fire due toexcessive current in the wiring.

OYDDCO2001

■ Type B

CAUTION - Key buttonoperation

Do not fold the key withoutpressing the release button.This may damage the key.

4 5


Type CTo remove the mechanical key, pressand hold the release button andremove the mechanical key.To reinstall the mechanical key, putthe key into the hole and push it untila click sound is heard.

OYDDCO2002

■ Type C


64

With a smart key, you can lock orunlock a door and even start theengine without inserting the key.The functions of the buttons on asmart key are similar to the remotekeyless entry. (Refer to the "Remotekeyless entry" in this chapter.)

Smart key functionsCarrying the smart key, you may lockand unlock the vehicle doors. Also,you may start the engine. Refer tothe following, for more details.

Locking

Pressing the button of the front out-side door handles with all doorsclosed and any door unlocked, locksall the doors. The hazard warninglights will blink and the chime willsound once to indicate that all doorsare locked. The button will only oper-ate when the smart key is within0.7~1 m (28~40 in.) from the outsidedoor handle. If you want to makesure that a door has locked or not,you should check the door lock but-ton inside the vehicle or pull the out-side door handle.

SMART KEY (IF EQUIPPED)

OYDDCO2007

OYDDCO2008

4 7


Even though you press the button,the doors will not lock and the chimewill sound for 3 seconds if any of thefollowing occurs:• The smart key is in the vehicle.• The ignition switch is in the ACC or

ON position.• Any door except the trunk is

opened.

Unlocking Pressing the button of the driver'soutside door handle with all doorsclosed and locked, unlocks the dri-ver's door. The hazard warning lightswill blink and the chime will soundtwice to indicate that the driver's dooris unlocked.Pressing the button in the front pas-senger's outside door handle with alldoors closed and locked, unlocks allthe doors. The hazard warning lightswill blink and the chime will soundtwice to indicate that all doors areunlocked. The button will only oper-ate when the smart key is within0.7~1 m (28~40 in.) from the outsidedoor handle.

Start-upYou can start the engine withoutinserting the key. For detailed infor-mation refer to "Starting the enginewith a smart key" in section 5.

Smart key precautions• If you lose your smart key, you will

not be able to start the engine. Towthe vehicle, if necessary, and con-tact an authorized Kia dealer.

• A maximum of 2 smart keys can beregistered to a single vehicle. Ifyou lose a smart key, you shouldimmediately take the vehicle andkey to your authorized Kia dealerto protect it from potential theft.

• The smart key will not work if anyof following occurs:- The smart key is close to a radio

transmitter such as a radio sta-tion or an airport which can inter-fere with normal operation of thesmart key.

- The smart key near a mobile two-way radio system or a cellularphone.

- Another vehicle’s smart key is beingoperated close to your vehicle.

When the smart key does not workcorrectly, open and close the doorwith the mechanical key. If youhave a problem with the smart key,contact an authorized Kia dealer.


84

• If the smart key is in close proximityto your cell phone or smart phone,the signal from the smart key couldbe blocked by normal operation ofyour cell phone or smart phone.This is especially important whenthe phone is active such as makingcall, receiving calls, text messaging,and/or sending/receiving emails.Avoid placing the smart key andyour cell phone or smart phone inthe same pants or jacket pocket andmaintain adequate distancebetween the two devices.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the followingtwo conditions:1. This device may not cause harm-

ful interference, and 2. This device must accept any inter-

ference received, including inter-ference that may cause undesiredoperation.

✽✽ NOTICEChanges or modifications notexpressly approved by the partyresponsible for compliance couldvoid the user’s authority to operatethe equipment. If the keyless entrysystem is inoperative due to changesor modifications not expresslyapproved by the party responsiblefor compliance, it will not be cov-ered by your manufacturer’s vehiclewarranty.

CAUTION - TransmitterKeep the smart key away fromwater or any liquid as it canbecome damaged and not func-tion properly.

4 9


REMOTE KEYLESS ENTRY (IF EQUIPPED)Remote keyless entry systemoperations

Lock (1)All doors are locked if the lock buttonis pressed. If all doors (and trunk) areclosed, the hazard warning lights willblink once to indicate that all doors(and trunk) are locked.Also, if the lock button is pressedonce more within 4 seconds, thehazard warning lights will blink andthe chime will sound once to confirmthat the door is locked.However, if any door remains open,the hazard warning lights (and/or thechime) will not operate. But if alldoors are closed after the lock buttonis pressed, the hazard warning lightswill blink once.

Unlock (2) The driver's door is unlocked if theunlock button is pressed once. Thehazard warning lights will blink (forsmart key, the chime also sounds)twice to indicate that the driver's dooris unlocked.All doors are unlocked if the unlockbutton is pressed once more within 4seconds. The hazard warning lightswill blink (for smart key, the chimealso sounds) twice again to indicatethat all doors are unlocked. Afterpressing this button, the doors willlock automatically unless you openany door within 30 seconds.

✽✽ NOTICEIf the keyless entry system is inoper-ative due to exposure to water or liq-uids, it will not be covered by yourmanufacturer's vehicle warranty.

OYDDCO2004

■ Type B

■ Type A

OYDDCO2003


104

Trunk open (3) (if equipped)The trunk is opened if the button ispressed for more than 1 second.Once the trunk is opened and thenclosed, the trunk will lock automatically.

Alarm (4)The horn sounds and the hazardwarning lights blink for about 30 sec-onds if this button is pressed formore than 0.5 seconds. To stop thehorn and lights, press any button onthe transmitter.

Transmitter precautionsThe transmitter (or smart key) will notwork if any of following occurs:• The ignition key is in the ignition

switch.• You exceed the operating distance

limit (about 30 m [90 feet]).• The battery in the transmitter (or

smart key) is weak.• Other vehicles or objects may be

blocking the signal.• The weather is extremely cold.• The transmitter (or smart key) is

close to a radio transmitter such asa radio station or an airport whichcan interfere with normal operationof the transmitter.

When the transmitter (or smart key)does not work properly, open andclose the door with the ignition key. Ifyou have a problem with the trans-mitter (or smart key), contact anauthorized Kia dealer.

• If the transmitter is in close proximi-ty to your cell phone or smart phone,the signal from the transmitter couldbe blocked by normal operation ofyour cell phone or smart phone.Thisis especially important when thephone is active such as making call,receiving calls, text messaging,and/or sending/receiving emails.Avoid placing the transmitter andyour cell phone or smart phone inthe same pants or jacket pocket andmaintain adequate distancebetween the two devices.

4 11





✽✽ NOTICEChanges or modifications notexpressly approved by the partyresponsible for compliance could voidthe user’s authority to operate theequipment. If the keyless entry sys-tem is inoperative due to changes ormodifications not expressly approvedby the party responsible for compli-ance, it will not be covered by yourmanufacturer’s vehicle warranty.

Battery replacement

A battery should last for several years,but if the transmitter or smart key isnot working properly, try replacing thebattery with a new one. If you areunsure how to use or replace the bat-tery, contact an authorized Kia dealer.

Type A1. Pry open the transmitter cover.2. Replace the battery with a new

battery (CR2032). When replacingthe battery, make sure the batteryposition.

3. Install the battery in the reverseorder of removal.

Type B1. Remove the mechanical key.2. Pry open the rear cover.3. Replace the battery with a new

battery (CR2032). When replacingthe battery, make sure the batteryposition.

4. Install the battery in the reverseorder of removal.

■ Type B, COYDDCO2005

■ Type A

OYDDCO2006


124

• The transmitter or smart key isdesigned to give you years of trou-ble-free use, however it can mal-function if exposed to moisture orstatic electricity. If you are unsurehow to use or replace the battery,contact an authorized Kia dealer.

• Using the wrong battery can causethe transmitter or smart key to mal-function. Be sure to use the correctbattery.

• An inappropriately dis-posed battery can be harm-ful to the environment andhuman health. Dispose thebattery according to yourlocal law(s) or regulation.

Immobilizer system

Your vehicle may be equipped withan electronic engine immobilizer sys-tem to reduce the risk of unautho-rized vehicle use.Your immobilizer system is com-prised of a small transponder in theignition key and electronic devicesinside the vehicle.With the immobilizer system, when-ever you insert your ignition key intothe ignition switch and turn it to ON,it checks and determines and verifiesthat the ignition key is valid.If the key is determined to be valid,the engine will start.If the key is determined to be invalid,the engine will not start.

OHD046100

CAUTION - Transmitterdamage

Do not drop, wet or expose thekeyless entry system transmit-ter to heat or sunlight.

IC WARNINGThis device complies withIndustry Canada licence-exempt RSS standard(s).Operation is subject to the fol-lowing two conditions: (1) thisdevice may not cause interfer-ence, and (2) this device mustaccept any interference, includ-ing interference that may causeundesired operation of thedevice.

4 13


To deactivate the immobilizersystem:Insert the ignition key into the keycylinder and turn it to the ON position.

To activate the immobilizer sys-tem:Turn the ignition key to the OFF posi-tion. The immobilizer system acti-vates automatically. Without a validignition key for your vehicle, theengine will not start.Your Immobilizer password is a cus-tomer unique password and shouldbe kept confidential. Do not leave thisnumber anywhere in your vehicle.

✽✽ NOTICEKeep each key separately in order toavoid a starting malfunction.

Do not put metal accessories nearthe ignition switch.Metal accessories may interrupt thetransponder signal and may preventthe engine from being started.If you need additional keys or loseyour keys, consult an authorized Kiadealer.




WARNINGChanges or modifications notexpressly approved by the partyresponsible for compliancecould void the user's authorityto operate the equipment.

CAUTION - Immobilizerdamage

Do not expose your immobilizersystem to moisture, static elec-tricity and rough handling. Thismay damage your immobilizer.

CAUTION - Immobilizeralterations

Do not change, alter or adjustthe immobilizer system becauseit could cause the immobilizersystem to malfunction.


144

Limp home (override) proce-dureWhen you turn the ignition switch tothe ON position, if the immobilizerindicator ( ) goes off after blink-ing 5 times, your transponderequipped in the ignition key is out oforder. You cannot start the enginewithout the limp home procedure. Tostart the engine, you have to inputyour password by using the ignitionswitch. Your password is only avail-able from an authorized Kia dealer-ship. Contact an authorized dealerfor more information.The following procedure is how toinput your password of “2345” as anexample.1. Turn the ignition switch to the ON

position. The immobilizer indicator( ) will blink 5 times and go offindicating the beginning of the limphome procedure.

2. Turn the ignition switch to the ACCposition.

3. To enter the first digit (in thisexample “2”), turn the ignitionswitch to the ON and ACC positiontwice. Perform the same proce-dure for the next digits between 3seconds and 10 seconds (forexample, for “3”, turn the ignitionON and ACC 3 times).

4. If all of the digits have been inputsuccessfully, you have to start theengine within 30 seconds. If youattempt to start the engine after 30seconds, the engine will not startand you will have to input yourpassword again.

After performing the limp home pro-cedure, you have to see an author-ized Kia dealer immediately toinspect and repair your ignition keyor immobilizer system.

4 15


This system is designed to provideprotection from unauthorized entryinto the vehicle. This system is operat-ed in three stages: the first is the"Armed" stage, the second is the"Theft-alarm" stage, and the third isthe "Disarmed" stage. If triggered, thesystem provides an audible alarm withblinking of the hazard warning lights.

Armed stagePark the vehicle and stop the engine.Arm the system as described below.1. Remove the ignition key from the

ignition switch and exit the vehicle.2. Make sure that all doors (and

trunk) and engine hood are closedand latched.

3. • Lock the doors by depressing thedoor lock button on the transmit-ter (or smart key).After completion of the stepsabove, the hazard warning lightswill blink once to indicate that thesystem is armed.If any door, trunk or engine hoodremains open, the hazard warn-ing lights won’t operate andtheft-alarm will not arm. Afterthis, if all doors, trunk and enginehood are closed, the hazardwarning lights blink once.

• Lock the doors by pressing thebutton of the front outside doorhandles with the smart key inyour possession.After completion of the stepsabove, the hazard warning lightswill blink once to indicate that thesystem is armed.If any door remains open, thehazard warning lights won’t oper-ate and theft-alarm will not arm.Close the door and try again tolock the doors.If trunk or engine hood remainsopen, the hazard warning lightswon’t operate and theft-alarm willnot arm. Close the trunk or enginehood. The hazard warning lightsblink once and theft-alarm arms.

THEFT-ALARM SYSTEM (IF EQUIPPED)

Armedstage

Theft-alarmstage

Disarmedstage


164

The theft-alarm system can be acti-vated by an authorized Kia dealer.If you want this feature, consult anauthorized Kia dealer.

Do not arm the system until allpassengers have left the vehicle. Ifthe system is armed while a pas-senger(s) remains in the vehicle,the alarm may be activated whenthe remaining passenger(s)leaves the vehicle. If any door (ortrunk) or engine hood is openedwithin 30 seconds after the sys-tem enters the armed stage, thesystem will be disarmed to pre-vent unnecessary alarm.

Theft-alarm stageThe alarm will be activated if any ofthe following occurs while the systemis armed.• A front or rear door is opened without

using the mechanical key or trans-mitter (or smart key).

• The trunk is opened without usingthe mechanical key or transmitter(or smart key).

• The engine hood is opened.The horn will sound and the hazardwarning lights will blink continuously forapproximately 27 seconds (2times). Toturn off the system, unlock the doorswith the transmitter (or smart key).

Disarmed stageThe system will be disarmed when:

Transmitter- The door unlock button is pressed.- The engine is started. (within 3

seconds)- The ignition switch is in the "ON"

position for 30 seconds or more.

Smart key- The door unlock button is pressed.- The button of the front outside door

is pressed while carrying the smartkey.

- The engine is started. (within 3seconds)

After the doors are unlocked, the haz-ard warning lights will blink twice toindicate that the system is disarmed.After pressing the unlock button, if anydoor (or trunk) is not opened within 30seconds, the system will be rearmed.

4 17


• Avoid trying to start the enginewhile the alarm is activated. Thevehicle starting motor is disabledduring the theft-alarm stage.If the system is not disarmed withthe transmitter, insert the key intothe ignition switch, turn the ignitionswitch to the ON position and waitfor 30 seconds. Then the systemwill be disarmed.

• If you lose your keys, consult yourauthorized Kia dealer.

• If the system is not disarmed withthe transmitter, insert the key intothe ignition switch and start theengine. Then the system will bedisarmed.

• If you lose your keys, consult yourauthorized Kia dealer.


184

DOOR LOCKSOperating door locks fromoutside the vehicle

• Turn the key toward the rear of thevehicle to unlock and toward thefront of the vehicle to lock.

• If you lock/unlock the door with akey, all vehicle doors willlock/unlock automatically. (ifequipped with power door locks)

• From the driver’s door, turn the keytoward the rear of the vehicle onceto unlock the driver’s door andonce more within 4 seconds tounlock all doors. (if equipped withpower door locks)

• Doors can also be locked andunlocked with the transmitter key(or smart key). (if equipped)

• Once the doors are unlocked, theymay be opened by pulling the doorhandle.

• When closing the door, push thedoor by hand. Make sure the doorsare closed securely.

✽✽ NOTICE• In cold and wet climates, door lock

and door mechanisms may notwork properly due to freezing con-ditions.

• If the door is locked/unlockedmultiple times in rapid successionwith either the vehicle key or doorlock switch, the system may stopoperating temporarily in order toprotect the circuit and preventdamage to system components.

Operating door locks frominside the vehicleWith the door lock button

• To unlock a door, pull the door lockbutton (1) to the "Unlock" position.The red mark (2) on the button willbe visible.

• To lock a door, push the door lockbutton (1) to the "Lock" position. Ifthe door is locked properly, the redmark (2) on the door lock buttonwill not show.

• To open a door, pull the door han-dle (3) outward.

OYDDCO2009

OYDDCO2010

Lock

Unlock

4 19


• If the inner door handle of the frontdoor is pulled when the door lockbutton is in the lock position, thebutton will unlock and the door willopen. (if equipped)

• Front doors cannot be locked if theignition key is in the ignition switch(or if the smart key is in the vehicle)and any front door is opened. (ifequipped)

If a power door lock ever fails to func-tion while you are in the vehicle, tryone or more of the following tech-niques to exit:• Operate the door unlock feature

repeatedly (both electronic andmanual) while simultaneouslypulling on the door handle.

• Operate the other door locks andhandles, front and rear.

• Lower a front window and use thekey to unlock the door from outside.

With central door lock switch (if equipped)

Operate by pressing the central doorlock switch.

OYDDCO2011

OUB041180N

■ Driver's door

■ Passenger’s door


204

• Press the switch to the "Lock" posi-tion (1), all vehicle doors will lock.

• Press the switch to the "Unlock"position (2), all vehicle doors willunlock.

• If the key is in the ignition switch (orif the smart key is in the vehicle)and any front door is opened, thedoors will not lock when the "Lock"position (1) of the central door lockswitch is pressed. (if equipped)

Impact sensing door unlocksystem (if equipped)All doors will automatically unlockwhen an impact causes the air bagsto deploy.

Auto door lock/unlock feature (if equipped)• All doors will automatically lock

when the transaxle shift lever isshifted out of P (Park).

• All doors will automatically unlockwhen the transaxle shift lever isshifted into P (Park).

WARNING - Unattendedchildren /animals

Never leave children or animalsunattended in your vehicle.An enclosed vehicle can becomeextremely hot, causing death orsevere injury to unattended chil-dren or animals who cannotescape the vehicle.

WARNING - DoorsThe doors should always befully closed and locked whilethe vehicle is in motion to pre-vent accidental opening of thedoor.

4 21


Speed sensing door lock sys-tem (if equipped)All doors will be automatically lockedafter the vehicle speed exceeds 9.3mph. And all doors will be automati-cally unlocked when you turn theengine off or when you remove theignition key. (if equipped)An authorized Kia dealer can acti-vate or deactivate some auto doorlock/ unlock features as follows;• Auto door unlock by using the dri-

ver's door lock button• Auto door lock/unlock by shifting

the transaxle shift lever out of P(Park) or into P (Park)

• Auto door unlock when the ignitionkey is removed from the ignitionswitch (for smart key, when theENGINE START/STOP button isturned to the OFF position)

If you want to activate or deactivatesome door lock/unlock feature, con-sult an authorized Kia dealer.

Child-protector rear door lock

The child safety lock is provided tohelp prevent children from acciden-tally opening the rear doors frominside the vehicle. The rear doorsafety locks should be used whenev-er children are in the vehicle.1. Open the rear door.2. Insert a key (or screwdriver) into the

hole and turn it to the lock ( ) posi-tion. the child safety lock (1) locatedon the rear edge of the door to thelock position. When the child safetylock is in the lock position, rear doorwill not open even when the innerdoor handle is pulled.

3. Close the rear door.To open the rear door, pull the out-side door handle (2).Even though the doors may beunlocked, the rear door will not openby pulling the inner door handle untilthe rear door child safety lock isunlocked.

OYDDCO2012

Lock

Unlock


224

Opening the trunk

• Press the trunk unlock button formore than 1 second on the trans-mitter (or smart key).

• Press the button on the trunk han-dle with the smart key in your pos-session.Once the trunk is opened and thenclosed, the trunk locks automati-cally.

• To open the trunk from inside thevehicle, pull the trunk lid releaselever.Once the trunk is opened and thenclosed, the trunk locks automati-cally.

✽✽ NOTICEIn cold and wet climates, trunk lockand trunk mechanisms may not workproperly due to freezing conditions.

TRUNK

OYDDCO2014

OYDDCO2013

CAUTIONMake certain that you close thetrunk before driving your vehi-cle. Possible damage may occurto attached hardware if thetrunk is not closed prior to driv-ing.

WARNINGThe trunk swings upward. Makesure no objects or people arenear the rear of the vehiclewhen opening the trunk.

4 23


Closing the trunkTo close, lower the trunk lid, thenpress down on it until it locks. To besure the trunk lid is securely fas-tened, always check by trying to pullit up again.

Emergency trunk safety release

Your vehicle is equipped with anemergency trunk release lever locat-ed inside the trunk. If someone isinadvertently locked in the trunk,moving the handle in the direction ofthe arrow will release the trunk latchmechanism and open the trunk.

WARNINGThe trunk lid should always bekept completely closed whilethe vehicle is in motion. If it isleft open or ajar, poisonousexhaust gases may enter thecar and serious illness or deathmay result.

OYDDCO2015

WARNING• No one should be allowed to

occupy the trunk at any time.The trunk is a very dangerouslocation in the event of a crash.

• Use the release lever foremergencies only. Useextreme caution, especiallywhile the vehicle is in motion.


244

(1) Driver’s door power window switch(2) Front passenger’s door power

window switch(3) Rear door (left) power window

switch(4) Rear door (right) power window

switch(5) Window opening and closing(6) Automatic power window down*(7) Power window lock button*

*: if equipped

WINDOWS

OYDDCO2016

4 25


In cold and wet climates, power win-dows may not work properly due tofreezing conditions.

Power windowsThe ignition switch must be in the ONposition for power windows to oper-ate. Each door has a power windowswitch that controls the door’s win-dow. The driver has a power windowlock switch which can block the oper-ation of passenger windows.The power windows can be operatedfor approximately 30 seconds after theignition key is removed or turned to theACC or LOCK position. However, if thefront doors are opened, the powerwindows cannot be operated evenwithin the 30 second period.

✽✽ NOTICEWhile driving with the rear windowsdown or with the sunroof (ifequipped) in an open (or partiallyopen) position, your vehicle maydemonstrate a wind buffeting orpulsation noise. This noise is a nor-mal occurrence and can be reducedor eliminated by taking the follow-ing actions. If the noise occurs withone or both of the rear windowsdown, partially lower both frontwindows approximately one inch. Ifyou experience the noise with thesunroof open, slightly reduce thesize of the sunroof opening.

Window opening and closing (if equipped)

The driver’s door has a master powerwindow switch that controls all thewindows in the vehicle.To open or close a window, pressdown or pull up the front portion ofthe corresponding switch to the firstdetent position (5).

OYDDCO2017


264

Auto down window (if equipped) (Driver’s window)

Pressing the power window switchmomentarily to the second detentposition (6) completely lowers thedriver’s window even when theswitch is released. To stop the win-dow at the desired position while thewindow is in operation, momentarilypull up the switch to the oppositedirection of the window movement.

Auto up/down window (if equipped)

Pressing or pulling up the power win-dow switch momentarily to the sec-ond detent position (6) completelylowers or lifts the window even whenthe switch is released. To stop thewindow at the desired position whilethe window is in operation, pull up orpress and release the switch to theopposite direction of the movement.If the power window is not operatedcorrectly, the automatic power win-dow system must be reset as follows:

1. Turn the ignition switch to the ONposition.

2. Close the window and continuepulling up on the driver’s powerwindow switch for at least 1 secondafter the window is completelyclosed.

OYDECO2224CN

OYDDCO2018

4 27


Automatic reversal If the upward movement of the win-dow is blocked by an object or part ofthe body, the window will detect theresistance and will stop upwardmovement. The window will thenlower approximately 30 cm (11.8 in.)to allow the object to be cleared.If the window detects the resistancewhile the power window switch ispulled up continuously, the windowwill stop upward movement thenlower approximately 2.5 cm (1 in.).

And if the power window switch ispulled up continuously again within 5seconds after the window is loweredby the automatic window reversalfeature, the automatic window rever-sal will not operate.The automatic reverse feature for thedriver’s window is only active whenthe "auto up" feature is used by fullypulling up the switch. The automaticreverse feature will not operate if thewindow is raised using the halfwayposition on the power window switch.

Power window lock button (if equipped)

The driver can disable the powerwindow switches on the rear passen-gers' doors by pressing the powerwindow lock switch to the lock posi-tion (pressed).When the power window lockswitch is pressed:• The driver's master control can

operate all the power windows.• The front passenger's control

can operate the front passen-ger's power window.

• The rear passenger's controlcannot operate the rear passen-ger's power window.

OUN026013

WARNING Always check for obstructionsbefore raising any window toavoid injuries or vehicle damage.If an object less than 4 mm (0.16in.) in diameter is caughtbetween the window glass andthe upper window channel, theautomatic reverse window maynot detect the resistance and willnot stop and reverse direction.

OYDDCO2019


284

Always double check to make sureall arms, hands, head and otherobstructions are safely out of the waybefore closing a window.

CAUTION - Opening / closingWindow

To prevent possible damage tothe power window system, donot open or close two windowsor more at the same time. Thiswill also ensure the longevity ofthe fuse.

WARNING - Power windows

Do not allow children to playwith the power windows. Keepthe driver’s door power windowlock switch in the LOCK position(pressed).

4 29


Opening the hood

1. Pull the release lever to unlatchthe hood. The hood should popopen slightly.

Open the hood after turning off theengine on a flat surface, shifting theshift lever to the P(Park) position forautomatic transaxle and to the1st(First) gear or R(Reverse) formanual transaxle, and setting theparking brake.

2. Go to the front of the vehicle, raisethe hood slightly, push the second-ary latch (1) left side and lift thehood (2).

3. Raise the hood. It will raise com-pletely by itself after it has beenraised about halfway.

HOOD

OYDDCO2020

OYDDCO2021

WARNING• Always double check to be

sure that the hood is firmlylatched before driving away. Ifit is not latched, the hoodcould fly open while the vehi-cle is being driven, causing atotal loss of visibility, whichmight result in an accident.

• Do not move the vehicle withthe hood raised. The view willbe blocked and the hoodcould fall or be damaged.


304

Closing the hood1. Before closing the hood, check the

following:• All filler caps in the engine com-

partment must be correctlyinstalled.

• Gloves, rags or any other com-bustible material must beremoved from the engine com-partment.

2. Return the support rod to its clip toprevent it from rattling.

3. Lower the hood until it is about 30cm (1 ft.) above the closed posi-tion and let it drop. Make sure thatit locks into place.

The support rod must be insertedcompletely into the hole wheneveryou inspect the engine compartment.This will prevent the hood from fallingand possibly injuring you.

WARNING - Fire riskDo not leave gloves, rags or anyother combustible material in theengine compartment. Doing somay cause a heat-induced fire.

WARNING - Unsecuredengine Hood

If the engine hood is notsecured properly, it is likely tofly up blocking your vision andcausing a crash.

4 31


Opening the fuel filler lid

The fuel filler lid must be openedfrom inside the vehicle by pulling upthe fuel filler lid opener.If the fuel filler lid does not openbecause ice has formed around it,tap lightly or push on the lid to breakthe ice and release the lid. Do not pryon the lid. If necessary, spray aroundthe lid with an approved de-icer fluid(do not use radiator anti-freeze) ormove the vehicle to a warm placeand allow the ice to melt.

1. Stop the engine.2. To open the fuel filler lid, pull the

fuel filler lid opener up.3. Pull open the fuel filler lid (1) out to

fully open.4. To remove the cap turn the fuel

filler cap (2) counterclockwise.5. Refuel as needed.

Closing the fuel filler lid1. To install the cap, turn it clockwise

until it "clicks" once. This indicatesthat the cap is securely tightened.

2. Close the fuel filler lid and push itlightly and make sure that it issecurely closed.

FUEL FILLER LID

WARNING - RefuelingAlways remove the fuel capcarefully and slowly. If the capis venting fuel or if you hear ahissing sound, wait until thecondition stops before com-pletely removing the cap.If pressurized fuel sprays out, itcan cover your clothes or skinand subject you to the risk offire and burns.

OYDDCO2023

OTF040027


324

Always check that the fuel cap isinstalled securely to prevent fuelspillage in the event of an accident.

✽✽ NOTICEWhen using an approved portablefuel container, be sure to place thecontainer on the ground prior torefueling. Static electricity dischargefrom the container can ignite fuelvapors causing a fire. Once refuelinghas begun, contact with the vehicleshould be maintained until the fill-ing is complete. Use only approvedportable plastic fuel containersdesigned to carry and store gasoline.

WARNING - Fire / explosion risk

Read and follow all warningsposted at the gas station facili-ty. Failure to follow all warningswill result in severe personalinjury, severe burns or deathdue to fire or explosion.

WARNING - Cell phonefires

Do not use cellular phones whilerefueling. Electric current and/orelectronic interference from cel-lular phones can potentiallyignite fuel vapors causing a fire.

WARNING - Static electricity

• Before touching the fuel noz-zle, you should eliminatepotentially dangerous staticelectricity discharge by touch-ing another metal part of thevehicle, a safe distance awayfrom the fuel filler neck, noz-zle, or other gas source.

• Do not get back into a vehicleonce you have begun refuel-ing since you can generatestatic electricity by touching,rubbing or sliding against anyitem or fabric (polyester, satin,nylon, etc.) capable of produc-ing static electricity. Staticelectricity discharge canignite fuel vapors resulting inrapid burning. If you must re-enter the vehicle, you shouldonce again eliminate poten-tially dangerous static elec-tricity discharge by touching ametal part of the vehicle, awayfrom the fuel filler neck, noz-zle or other gasoline source.

4 33


Make sure to refuel your vehicleaccording to the "Fuel requirements"suggested in chapter 1.If the fuel filler cap requires replace-ment, use only a genuine Kia cap orthe equivalent specified for your vehi-cle. An incorrect fuel filler cap canresult in a serious malfunction of thefuel system or emission control sys-tem.

CAUTION - Exterior paintDo not spill fuel on the exteriorsurfaces of the vehicle. Anytype of fuel spilled on paintedsurfaces may damage the paint.

WARNING - Refueling&Vehicle fires

When refueling, always shut theengine off. Sparks produced byelectrical components relatedto the engine can ignite fuelvapors causing a fire. Oncerefueling is complete, check tomake sure the filler cap andfiller door are securely closed,before starting the engine.

WARNING - SmokingDO NOT use matches or a lighterand DO NOT SMOKE or leave alit cigarette in your vehicle whileat a gas station especially duringrefueling. Automotive fuel ishighly flammable and can, whenignited, result in fire.


344

If your vehicle is equipped with asunroof, you can slide or tilt yoursunroof with the sunroof control leverlocated on the overhead console.The sunroof can only be opened,closed, or tilted when the ignitionswitch is in the ON position.

In cold and wet climates, the sunroofmay not work properly due to freez-ing conditions.After the vehicle is washed or in arainstorm, be sure to wipe off anywater that is on the sunroof beforeoperating it.The sunroof cannot slide when it is inthe tilt position nor can it be tiltedwhile in an open or slide position.

Sunroof open warning (if equipped)

SUNROOF (IF EQUIPPED)

CAUTION - Sunroof control lever

Do not continue to press thesunroof control lever after thesunroof is fully opened, closed,or tilted. Damage to the motor orsystem components couldoccur.

OYDDCO2025 OYDDDI2016

OYDNDI2030

OYDNDI2052

■ Type B

■ Type A

■ Type CWARNING - Sunroof

operationWhen closing the sunroof, makesure there are no body parts inthe movement range of the slid-ing roof. Parts of the body couldbecome trapped or crushed.

4 35


If the driver removes the ignition key(smart key: turns off the engine) andopens the driver-side door when thesunroof is not fully closed, the warningchime will sound for a few secondsand a warning image will appear onthe LCD display.Close the sunroof securely whenleaving your vehicle.

Sliding the sunroof

To open the sunroof automatically:Pull the sunroof control lever back-ward to the second detent positionand then release it. The sunroof willslide all the way open.The sunroof will slide to the recom-mended open position (about 5 cm(2in.) before the maximum slideopen position).To stop the sunroof sliding at anypoint, pull or push the sunroof controllever momentarily.

To open the sunroof to the maximumslide open position, press the switchtowards the rear of the vehicle onceagain and hold it until the sunroofslide all the way open.To reduce wind noise while driving,we recommend you to drive at therecommended position (about 5 cm(2in.) before the maximum slideopen position).

To close the sunroof automatically:Push the sunroof control lever for-ward to the second detent positionand then release it. The sunroof willautomatically close all the way.To stop the sunroof sliding at anypoint, pull or push the sunroof controllever momentarily.While driving with the sunroof in anopen (or partially open position),your vehicle may demonstrate a windbuffeting or pulsation noise. Thisnoise is a normal occurrence andcan be reduced or eliminated by tak-ing the following actions. If you expe-rience the noise with the sunroofopen, slightly reduce the size of thesunroof opening.

OYDDCO2026


364

Automatic reversal

If an object or part of the body isdetected while the sunroof glass orsunshade is closing automatically, itwill reverse the direction, and thenstop.The auto reverse function does notwork if a tiny obstacle is between thesliding glass or sunshade and thesunroof sash. You should alwayscheck that all passengers andobjects are away from the sunroofbefore closing it.

Tilting the sunroof

To open the sunroof, push the sunroofcontrol lever upward until the sunroofmoves to the desired position.To close the sunroof, push the sunrooflever forward or pull downward until thesunroof moves to the desired position.

Sunshade

When opening the sunroof, the sun-shade will also open. Once the sun-roof is closed, the sunshade can bemanually closed.

OYF049215 OYDDCO2027

CAUTION - Sunroof motor damage

If you try to open the sunroofwhen the temperature is belowfreezing or when the sunroof iscovered with snow or ice, theglass or the motor could bedamaged.

OBK049019

4 37


Resetting the sunroofWhenever the vehicle battery is dis-connected or discharged, or relatedfuse is blown, you must reset yoursunroof system as follows:

1. Turn the ignition switch to the ONposition or start the engine. Werecommend resetting the sunroofwhile the engine is running.

2. Push and release the control leverforward in the direction of closerepeatedly until the sunroof doesnot move. Sunroof will stop at theclose position or the tilt positiondepends on the sunroof condition.

3. Release the control lever whensunroof does not move.

4. Push the control lever forward in thedirection of close about 10 seconds.- When the sunroof is in the close

position :Glass will tilt up then will move upand down slightly.

- When the sunroof is in the tiltposition:Glass will move up and downslightly.

5. Within 3 seconds, push the sun-roof control lever forward in thedirection of close until the sunroofoperates as follows:

Tilt down → Slide Open →Slide Close.

✽✽ NOTICEDo not release the lever until theoperation is completed.If you release the lever during oper-ation, try again from step 2.

6. Release the sunroof control leverafter all operation has completed.(The sunroof system has beenreset.)

❈ For more detailed information,contact an authorized Kia dealer.

✽✽ NOTICEIf the sunroof is not reset when thevehicle battery is disconnected ordischarged, or related fuse is blown,the sunroof may operate improperly.


384

Electric power steering (EPS)Power steering uses the motor toassist you in steering the vehicle. Ifthe engine is off or if the power steer-ing system becomes inoperative, thevehicle may still be steered, but it willrequire increased steering effort.The motor driven power steering iscontrolled by the power steering con-trol unit which senses the steeringwheel torque and vehicle speed tocommand the motor.The steering wheel becomes heavieras the vehicle’s speed increases andbecomes lighter as the vehicle’sspeed decreases for better control ofthe steering wheel.Should you notice any change in theeffort required to steer during normalvehicle operation, have the powersteering checked by an authorizedKia dealer.

✽✽ NOTICEThe following symptoms may occurduring normal vehicle operation:• The steering effort is increased

immediately after turning the igni-tion switch on. This happens as thesystem performs the EPS systemdiagnostics. When the diagnosticsare completed, the steering wheelwill return to its normal condition

• A click noise may be heard fromthe EPS relay after the ignitionswitch is turned to the ON orLOCK position.

• Motor noise may be heard whenthe vehicle is at a stop or at a lowdriving speed.

• The steering effort increases if thesteering wheel is rotated continu-ously when the vehicle is not inmotion. However, after a few min-utes, it will return to its normalcondition.

• When you operate the steeringwheel in low temperature, noisemay occur. If the temperaturerises, the noise will likely disap-pear. This is a normal condition.

If the Electric Power Steering Systemdoes not operate normally, the warn-ing light will illuminate on the instru-ment cluster.The steering wheel mayrequire increased steering effort.Take your vehicle to an authorizedKia dealer and have the vehiclechecked as soon as possible.

STEERING WHEEL

4 39


Tilt and telescoping steeringTilt steering allows you to adjust thesteering wheel before you drive. Youcan also raise it to give your legsmore room when you exit and enterthe vehicle.

The steering wheel should be posi-tioned so that it is comfortable foryou to drive, while permitting you tosee the instrument panel warninglights and gauges.

To change the steering wheel angle,pull down the lock release lever (1),adjust the steering wheel to thedesired angle (2) and height (3), thenpull up the lock-release lever to lockthe steering wheel in place. Be sureto adjust the steering wheel to thedesired position before driving.

Horn

To sound the horn, press the hornsymbol on your steering wheel.Check the horn regularly to be sure itoperates properly.To sound the horn, press the areaindicated by the horn symbol on yoursteering wheel (see illustration). Thehorn will operate only when this areais pressed.

WARNING - Steeringwheel adjustment

Never adjust the angle andheight of the steering wheelwhile driving. You may losesteering control

OYDDCO2028

OYDDCO2030


404

Heated steering wheel (if equipped)

With the ignition switch in the ONposition, pressing the heated steer-ing wheel button warms the steeringwheel. The indicator on the buttonwill illuminate and notify you on theLCD display.To turn the heated steering wheel off,press the button once again. Theindicator on the button will turn offand notify you on the LCD display.If you turn on the ignition again afterturning off your engine in half anhour (after operating heater button),the heating system will be main-tained in its 'on' condition.

FLEX STEER (if equipped)

The FLEX STEER controls steeringeffort based upon driver's preferenceor road condition.You can select the desired steeringmode by pressing the FLEX STEERbutton.

CAUTION• Do not install any grip to oper-

ate the steering wheel. Thiscauses damage to the heatedsteering wheel system.

• When cleaning the heatedsteering wheel, do not use anorganic solvent such as paintthinner, benzene, alcohol andgasoline. Doing so may dam-age the surface of the steeringwheel.

• If the surface of the steeringwheel is damaged by a sharpobject, damage to the heatedsteering wheel componentscould occur.

OYDDCO2029

OYDDCO2223

4 41


When the steering mode button ispressed, the selected steering modewill appear on the LCD display.If the steering mode button is pressedwithin 4 seconds, the steering modewill change as shown above the pic-tures.If the steering wheel mode button isnot pressed for about 4 seconds, theLCD display will change to the previ-ous screen.

Normal mode

The normal mode offers mediumsteering effort.

Sport mode

The steering wheel becomes heav-ier. The sport mode is usually usedwhen driving on the highway.

OYDDCO2204

OYDDCO2207

■ Type A

■ Type B

OYDECO2233

OYDECO2232

■ Type A

■ Type BOYDDCO2206

OYDDCO2208

■ Type A

■ Type B


424

Comfort mode

The steering wheel becomes lighter.The comfort mode is usually usedwhen driving in the city or when park-ing the vehicle.

OYDDCO2205

OYDDCO2209

■ Type A

■ Type B

CAUTION• For your safety, if you press

the steering mode buttonwhile operating the steeringwheel, the LCD display willchange, but steering effort willnot change immediately. Afteroperating the steering wheel,the steering effort will changeautomatically to the selectedmode.

• Use caution when changing thesteering mode while driving.

• When the electronic powersteering is not operating, theflex steering wheel will notwork.

4 43


Inside rearview mirrorAdjust the rearview mirror so that thecenter view through the rear windowis seen. Make this adjustment beforeyou start driving.Do not place objects in the rear seatwhich would interfere with your visionthrough the rear window.

Day/night rearview mirror (if equipped)

Make this adjustment before youstart driving and while the day/nightlever is in the day position.Pull the day/night lever toward you toreduce the glare from the headlightsof the vehicles behind you duringnight driving.Remember that you lose somerearview clarity in the night position.

Electric chromic mirror withhomelink® system (if equipped)

To operate the electric rearview mir-rorPress the I button (1) to turn theautomatic- dimming function on. Themirror indicator light will illuminate.Press the O button (2) to turn theautomatic- dimming function off. Themirror indicator light will turn off.

* HomeLink® is a registered trade-mark of Johnson Controls, Inc.

MIRRORS

WARNING - Mirror adjustment

Do not adjust the rearview mirrorwhile the vehicle is moving. Thiscould result in loss of control.

OYDDCO2031

Day

Night

OHD046025N


444

HomeLink®* Wireless Control SystemYour new mirror comes with an inte-grated Homelink® UniversalTransceiver, which allows you to pro-gram the mirror to activate yourgarage door(s), estate gate, homelighting, etc. The mirror actuallylearns the codes from your variousexisting transmitters.

Retain the original transmitter forfuture programming procedures (i.e.,new vehicle purchase). It is also sug-gested that upon the sale of the vehi-cle, the programmed Homelink® but-tons be erased for security purposes(follow step 1 in the "Programming"portion of this text).

ProgrammingYour vehicle may require the ignitionswitch to be turned to the ACC posi-tion for programming and/or opera-tion of Homelink®. It is also recom-mended that a new battery bereplaced in the hand-held transmitterof the device being programmed toHomelink® for quicker training andaccurate transmission of the radio-frequency.Follow these steps to train yourHomelink® mirror:

OHD046305N

Glare detection sensorIndicator light

Homelink® buttons

WARNING• When programming the

HomeLink® Wireless ControlSystem, you may be operatinga garage door or gate opera-tor. Make sure that people andobjects are out of the way ofthe moving door or gate toprevent potential harm ordamage.

• Do not use HomeLink® withany garage door opener thatlacks the safety stop andreverse feature as required byfederal safety standards. (Thisincludes any garage dooropener model manufacturedbefore April 1, 1982.) A garagedoor opener which cannotdetect an object, signaling thedoor to stop and reverse,does not meet current federalsafety standards. Using agarage door opener withoutthese features increases riskof serious injury or death. Formore information, call 1-800-355-3515 or on the internet atwww.homelink.com.

4 45


1.When programming the buttons forthe first time, press and hold theleft and center buttons ( , )simultaneously until the indicatorlight begins to flash after approxi-mately 20 seconds. (This proce-dure erases the factory-set defaultcodes. Do not perform this step toprogram additional hand-heldtransmitters.)

✽✽ NOTICEFor non rolling code garage dooropeners, follow steps 2 - 3. For rolling code garage door open-ers, follow steps 2 - 6. For Canadian Programming, pleasefollow the Canadian Programmingsection.For help with determining whetheryour garage is non-rolling code orrolling code, please refer to thegarage door openers owner’s manu-al or contact Homelink® customerservice at 1-800-355-3515.

2.Press and hold the button on theHomelink® system you wish to trainand the button on the transmitterwhile the transmitter is approxi-mately 1 to 3 inches away from themirror. Do not release the buttonsuntil step 3 has been completed.

3.The Homelink® indicator light willflash, first slowly and then rapidly.When the indicator light flashesrapidly, both buttons may bereleased. (The rapid flashing lightindicates successful programmingof the new frequency signal.)

OHD046306N

Flashing

OHD046307N

Flashing

1-3inc

hes

Transmitter


464

✽✽ NOTICESome gate operators and garagedoor openers may require you toreplace step #3 with the "cycling"procedure noted in the "CanadianProgramming" section of this docu-ment.

Rolling code programmingTo train a garage door opener (orother rolling code equipped devices)with the rolling code feature, followthese instructions after completingthe "Programming" portion of thistext. (A second person may make thefollowing training procedures quicker& easier.) 4. Locate the "learn" or "smart" but-

ton on the device’s motor headunit. Exact location and color ofthe button may vary by productbrand. If there is difficulty locatingthe "learn" or "smart" button, refer-ence the device’s owner’s manualor contact Homelink® at 1-800-355-3515 or on the internet atwww.homelink.com.

5. Press and release the "learn" or"smart" button on the device’smotor head unit. You have 30 sec-onds to complete step number 6.

6. Return to the vehicle and firmlypress and release the pro-grammed Homelink® button up tothree times. The rolling codeequipped device should now rec-ognize the Homelink® signal andactivate when the Homelink® but-ton is pressed. The remaining twobuttons may now be programmedif this has not previously beendone. Refer to the "Programming"portion of this text.

Operating Homelink®

To operate, simply press the pro-grammed Homelink® button.Activation will now occur for thetrained product (garage door, securi-ty system, entry door lock, estategate, or home or office lighting). Forconvenience, the hand-held trans-mitter of the device may also be usedat any time. The Homelink® WirelessControls System (once programmed)or the original hand-held transmittermay be used to activate the device(e.g. garage door, entry door lock,etc.). In the event that there are stillprogramming difficulties, contactHomelink® at 1-800-355-3515 or onthe internet at www.homelink.com.

4 47


Erasing programmed Homelink®

buttons

To erase the three programmed but-tons (individual buttons cannot beerased):• Press and hold the left and center

buttons simultaneously, until theindicator light begins to flash(approximately 20 seconds).Release both buttons. Do not holdfor longer than 30 seconds.

Homelink® is now in the train (orlearning) mode and can be pro-grammed at any time.

Reprogramming a singleHomelink® buttonTo program a device to Homelink®

using a Homelink® button previouslytrained, follow these steps:1. Press and hold the desired

Homelink® button. Do NOT releaseuntil step 4 has been completed.

2. When the indicator light begins toflash slowly (after 20 seconds),position the hand-held transmitter1 to 3 inches away from theHomelink® surface.

3. Press and hold the hand-heldtransmitter button (or press and"cycle" - as described in"Canadian Programming" above).

4. The Homelink® indicator light willflash, first slowly and then rapidly.When the indicator light begins toflash rapidly, release both buttons.

The previous device has now beenerased and the new device can beactivated by pushing the Homelink®

button that has just been pro-grammed. This procedure will notaffect any other programmedHomelink® buttons.

Gate operator programming &canadian programmingDuring programming, your hand-heldtransmitter may automatically stoptransmitting. Continue to press andhold the Homelink® button (notesteps 2 through 4 in the"Programming" portion of this text)while you press and re-press("cycle") your handheld transmitterevery two seconds until the frequen-cy signal has been learned. The indi-cator light will flash slowly and thenrapidly after several seconds uponsuccessful training.OHD046306N

Flashing


484

AccessoriesIf you would like additional informa-tion on the Homelink® WirelessControl System, Homelink® compati-ble products, or to purchase otheraccessories such as the HomeLink®

Lighting Package, please contactHomelink® at 1-800-355-3515 or onthe internet at www.homelink.com.




Outside rearview mirrorBe sure to adjust mirror anglesbefore driving.Your vehicle is equipped with bothleft-hand and right-hand outsiderearview mirrors. The mirrors can beadjusted remotely with the remoteswitch (if equipped).The mirror headscan be folded to prevent damage dur-ing an automatic car wash or whenpassing through a narrow street.The right outside rearview mirror isconvex. Objects seen in the mirrorare closer than they appear.Use your interior rearview mirror ordirect observation to determine theactual distance of following vehicleswhen changing lanes.

WARNINGThe HomeLink® transmitter hasbeen tested and complies withFCC and DOC/MDC rules.Changes or modifications notexpressly approved by the partyresponsible for compliancecould void the user’s authorityto operate the equipment.IC: 4112104541A Gentex MODEL/FCC ID: NZLSTDHL3

4 49


Remote control

Electric typeThe electric remote control mirrorswitch allows you to adjust the posi-tion of the left and right outsiderearview mirrors. To adjust the posi-tion of either mirror the ignition switchshould be in the ACC or ON position.Move the lever (1) to R or L to selectthe right side mirror or the left sidemirror, then press a correspondingpoint on the mirror adjustment con-trol to position the selected mirror up,down, left or right.After the adjustment, put the leverinto neutral (center) position to pre-vent inadvertent adjustment.

CAUTION - Outside mirror• The mirrors stop moving when

they reach the maximumadjusting angles, but themotor continues to operatewhile the switch is pressed.Do not press the switch longerthan necessary, the motormay be damaged.

• Do not attempt to adjust theoutside rearview mirror byhand. Doing so may damagethe parts.OYDDCO2039

CAUTION - Rearview mirror

Do not scrape ice off the mirrorface; this may damage the sur-face of the glass. If ice shouldrestrict movement of the mirror,do not force the mirror foradjustment. To remove ice, usea deicer spray, or a sponge orsoft cloth with very warm water.

WARNING - Mirror adjustment

Do not adjust or fold the outsiderearview mirrors while the vehi-cle is moving. This could resultin loss of control.


504

Folding the outside rearview mirror

Electric typeThe outside rearview mirror can befolded or unfolded by pressing theswitch as below.Left (1) : The mirror will unfold.Right (2) : The mirror will fold.

Center (AUTO, 3) :The mirror will fold or unfold auto-matically as follows:• Without smart key system

- The mirror will fold or unfold whenthe door is locked or unlocked bythe transmitter.

• With smart key system- The mirror will fold or unfold when

the door is locked or unlocked bythe smart key.

- The mirror will fold or unfold whenthe door is locked or unlocked bythe button on the outside doorhandle.

- The mirror will unfold when youapproach the vehicle (all doorsclosed and locked) with a smartkey in possession. (if equipped)

OYDDCO2041

CAUTION - Electric typeoutsiderearview mirror

The electric type outsiderearview mirror operates eventhough the ignition switch is inthe OFF position. However, toprevent unnecessary batterydischarge, do not adjust themirrors longer than necessarywhile the engine is not running.Do not attempt to fold the elec-tric type outside rearview mirrorby hand because doing socould cause motor damage orfailure.

4 51


Manual typeTo fold outside rearview mirror, graspthe housing of mirror and then fold ittoward the rear of the vehicle.

OYDDCO2040


524

INSTRUMENT CLUSTER

1. Tachometer

2. Speedometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. Turn signal indicators

6. Warning and indicator lights

7. LCD display

OYDNDI3001C/OYDNDI2002C

■■ Type A / Type B

❈ The actual cluster in the vehicle may differfrom the illustration.For more details refer to the "Gauges" inthe next pages.

■■ Type C

4 53


Instrument Cluster ControlAdjusting Instrument ClusterIllumination

The instrument panel illuminationintensity can be adjusted by pressingthe control switch with the headlightswitch in any position when the igni-tion switch is in the ON position.The illumination intensity is shownon the instrument cluster LCD dis-play.

• If you hold the illumination controlbutton ("+" or "-"), the brightnesswill be changed continuously.

• If the brightness reaches to themaximum or minimum level, analarm will sound.

OYDDDI2017

OYDDDI2011/OYDEDI2020

OYDEDI2034

■ Type A ■ Type B

■ Type C


544

LCD Display Control

The LCD display modes can bechanged by using the control buttonson the steering wheel.

[Type A](1) TRIP : TRIP button for changing

trip modes(2) RESET : RESET button for reset-

ting items

[Type B](1) : MODE button for changing

modes(2) : MOVE button for changing

items(3) : SELECT/RESET button for

setting or resetting theselected item

❈ For the LCD modes, refer to "LCDDisplay" in this chapter.

GaugesSpeedometer

The speedometer indicates the for-ward speed of the vehicle.The speedometer is calibrated inkilometers per hour and/or miles perhour.

OYDDDI2018 OYDEDI2003L

OYDEDI2004L

■ Type A, B

■ Type C

■ Type A

■ Type B

4 55


Tachometer

The tachometer indicates theapproximate number of engine revo-lutions per minute (rpm).Use the tachometer to select the cor-rect shift points and to prevent lug-ging and/or over-revving the engine.

The tachometer pointer may moveslightly when the ignition switch is inACC or ON position with the engineOFF. This movement is normal andwill not affect the accuracy of thetachometer once the engine is run-ning.

Engine coolant temperaturegauge

This gauge shows the temperatureof the engine coolant when the igni-tion switch is ON.Do not continue driving with an over-heated engine. If your vehicle over-heats, refer to "If the engine over-heats" in chapter 6.If the gauge pointer moves beyondthe normal range area toward the "H"position, it indicates overheating thatmay damage the engine.

OYDDDI2005

OYDDDI2006

■ Type A, B

■ Type C

CAUTION - Red zoneDo not operate the engine with-in the tachometer's RED ZONE.This may cause severe enginedamage.

OYDDDI2007/OYDDDI2008

■ Type A, B ■ Type B


564

Fuel gauge

The fuel gauge indicates the approx-imate amount of fuel remaining in thefuel tank. The fuel tank capacity isgiven in chapter 8. The fuel gauge issupplemented by a low fuel warninglight, which will illuminate when thefuel tank is nearly empty.

On inclines or curves, the fuel gaugepointer may fluctuate or the low fuelwarning light may come on earlierthan usual due to the movement offuel in the tank.

Odometer

The odometer indicates the total dis-tance the vehicle has been driven.You will also find the odometer usefulto determine when periodic mainte-nance should be performed.

OYDDDI2009

OYDDDI2010

■ Type A, B

■ Type C

WARNING - Fuel gaugeStop and obtain additional fuelas soon as possible after thewarning light comes on or whenthe gauge indicator comesclose to the E level. Running outof fuel can expose vehicle occu-pants to danger.

CAUTION - Low fuelAvoid driving with extremelylow fuel level. Running out offuel could cause the engine tomisfire, damaging the catalyticconverter.


OYDDDI2906


■ Type C

4 57


Transaxle Shift IndicatorAutomatic Transaxle ShiftIndicator (if equipped)

This indicator displays which auto-matic transaxle shift lever is selected.

• Park : P• Reverse : R• Neutral : N• Drive : D• Sports Mode : 1, 2, 3, 4, 5, 6

Manual transaxle shiftindicator (if equipped)

This indicator informs you whichgear is desired while driving to savefuel.For example

: Indicates that shifting up to the3rd gear is desired (currentlythe shift lever is in the 2ndgear).

: Indicates that shifting down tothe 3rd gear is desired (current-ly the shift lever is in the 4thgear).

✽✽ NOTICEWhen the system is not workingproperly, up & down arrow indica-tor and Gear are not displayed.


OYDDDI2905


■ Type C


584

LCD ModesLCD DISPLAY (IF EQUIPPED)

❈ For controlling the LCD modes, refer to "LCD Display Control" in this chapter.

Modes Symbol

ExplanationType B Type C

Trip Computer This mode displays driving information like the tripmeter, fuel economy,and so on.For more details, refer to "Trip Computer" in this chapter.

Service This mode informs of service interval (mileage or days).

User Settings On this mode, you can change settings of the doors, lamps, and so on.

A/V(if equipped)

- This mode displays the state of the A/V system.

Turn By Turn(if equipped)

- On this mode, you can change settings of the doors, lamps, and so on.

4 59


Service ModeService Interval

Service inIt calculates and displays when youneed a scheduled maintenanceservice (mileage or days).If the remaining mileage or timereaches 1,500 km (900 mi.) or 30days, "Service in" message is dis-played for several seconds each timeyou set the ignition switch or EngineStart/Stop Button to the ON position.

Service requiredIf you do not have your vehicle serv-iced according to the already inputtedservice interval, "Service required"message is displayed for several sec-onds each time you set the ignitionswitch or Engine Start/Stop Button tothe ON position (The mileage andtime changes to "---").To reset the service interval to themileage and days you inputted before:- Press the SELECT/RESET button

for more than 1 second.

Service in OFFIf the service interval is not set,"Service in OFF" message is dis-played on the LCD display.

✽✽ NOTICE If any of the following conditionsoccurs, the mileage and days may beincorrect.- The battery cable is disconnected.- The fuse switch is turned off.- The battery is discharged.

OYDEDI2059/OYDEDI2035

■ Type B ■ Type C






604

User Settings ModeDescription

On this mode, you can change set-ting of the doors, lamps, and so on.

DoorAuto Door Lock (if equipped)• Off:

The auto door lock operation willbe deactivated.

• Speed:All doors will be automaticallylocked when the vehicle speedexceeds 15km/h (9.3mph).

• Shift Lever:All doors will be automaticallylocked if the automatic transaxleshift lever is shifted from the P(Park) position to the R (Reverse),N (Neutral), or D (Drive) position.

Auto Door Unlock (if equipped)• Off:

The auto door unlock operation willbe canceled.

• Key Out or Power Off:All doors will be automaticallyunlocked when the ignition key isremoved from ignition switch orEngine Start/Stop Button is set tothe OFF position.

• Shift Lever:All doors will be automaticallyunlocked if the automatic transaxleshift lever is shifted to the P (Park)position.



4 61


Two Press Unlock (if equipped)• Off:

The two press unlock function willbe deactivated.Therefore, all doorswill unlock if the door is unlocked.

• On:The driver’s door will unlock if thedoor is unlocked. When the door isunlocked again within 4 seconds,all doors will unlock.

Horn Feedback (if equipped)• Off:

The Horn feedback operation willbe deactivated.

• On:After locking the door by pressingthe lock button on the transmitter, ifyou press the lock button againwithin 4 seconds, the warningsound will operate once to indicatethat all doors are locked.

LampHead Lamp Delay (if equipped)If this item is checked, the headlampdelay and headlamp welcome func-tion will be activated.

Welcome Light (if equipped)If this item is checked, the welcomelight function of the puddle lamp willbe activated.

One Touch Turn Lamp (if equipped)If this item is checked, the lanechange signals will blink 3, 5 or 7times when the turn signal lever ismoved slightly.

SettingsWelcome SoundIf this item is checked, the welcomesound function will be activated.

Shift Indicator (if equipped)If this item is checked, the shift indi-cator function will be activated.For more details, refer to "InstrumentCluster" in this chapter.

Seat Easy Access (if equipped)If this item is checked, the driver’sseat will automatically move forwardor rearward for the driver to enter orexit the vehicle comfortably.


624

AVG Fuel Eco Reset• Auto Reset:

The average fuel economy willreset automatically when refueling.

• Manual Reset:The average fuel economy will notreset automatically whenever refu-eling.

For more details, refer to "TripComputer" in this chapter.

Service Interval

On this mode, you can activate theservice interval function with mileage(mi. or km) and period (months).



4 63


A/V Mode (if equipped)

This mode displays the state of theA/V system.

Turn By Turn Mode (if equipped)

This mode displays the state of thenavigation.

OYDDDI2058OYDDDI2057

■ Type C ■ Type C


644

Warning MessagesShift to "P" position (for smart keysystem and automatic transaxle)

• This warning message illuminates ifyou try to turn off the engine withoutthe shift lever in P (Park) position.

• At this time, the Engine Start/StopButton turns to the ACC position (Ifyou press the Engine Start/StopButton once more, it will turn to theON position).

Low Key Battery (for smart key system)

• This warning message illuminatesif the battery of the smart key isdischarged when the EngineStart/Stop Button changes to theOFF position.

Press start button while turnsteering (for smart key system)

• This warning message illuminatesif the steering wheel does notunlock normally when the EngineStart/Stop Button is pressed.

• It means that you should press theEngine Start/Stop Button whileturning the steering wheel rightand left.



OYDNDI2907/OYDNDI2908




4 65


Steering wheel unlocked (for smart key system)

• This warning message illuminatesif the steering wheel does not lockwhen the Engine Start/Stop Buttonchanges to the OFF position.

Check steering wheel lock system (for smart key system)

• This warning message illuminatesif the steering wheel does not locknormally when the EngineStart/Stop Button changes to theOFF position.

Press brake pedal to start engine (for smart key system and auto-matic transaxle)

• This warning message illuminatesif the Engine Start/Stop Buttonchanges to the ACC position twiceby pressing the button repeatedlywithout depressing the brake pedal.

• It means that you should depressthe brake pedal to start the engine.








664

Press clutch pedal to start engine(for smart key system and manualtransaxle)

• This warning message illuminates ifthe Engine Start/Stop Buttonchanges to the ACC position twiceby pressing the button repeatedlywithout depressing the clutch pedal.

• It means that you should depressthe clutch pedal to start the engine.

Key not in vehicle (for smart key system)

• This warning message illuminatesif the smart key is not in the vehiclewhen you press the EngineStart/Stop Button.

• It means that you should alwayshave the smart key with you.

Key not detected (for smart key system)

• This warning message illuminatesif the smart key is not detectedwhen you press the EngineStart/Stop Button.







4 67


Press start button again (for smart key system)

• This warning message illuminatesif you can not operate the EngineStart/Stop Button when there is aproblem with the Engine Start/StopButton system.

• It means that you could start theengine by pressing the EngineStart/ Stop Button once more.

• If the warning illuminates eachtime you press the EngineStart/Stop Button, have your vehi-cle inspected by an authorized Kiadealer.

Press start button with smart key (for smart key system)

• This warning message illuminatesif you press the Engine Start/StopButton while the warning message"Key not detected" is illuminating.

• At this time, the immobilizer indica-tor light blinks.

Check fuse "BRAKE SWITCH" (for smart key system and auto-matic transaxle)

• This warning message illuminatesif the brake switch fuse is discon-nected.

• It means that you should replacethe fuse with a new one. If that isnot possible, you can start theengine by pressing the EngineStart/Stop Button for 10 seconds inthe ACC position.








684

Shift to "P" or "N" to start engine (for smart key system and auto-matic transaxle)

• This warning message illuminatesif you try to start the engine withthe shift lever not in the P (Park) orN (Neutral) position.

✽✽ NOTICEYou can start the engine with theshift lever in the N (Neutral) position.But, for your safety, you should startthe engine with the shift lever in the P(Park) position.

Door Open

• It means that any door is open.OYDEDI2064/OYDEDI2049




4 69


Trunk Open

• It means that the trunk is open.

Sunroof Open (if equipped)

• The warning message illuminatesif you turn off the engine and thenopen the driver's door when thesunroof is open.

Low Washer Fluid (if equipped)

• This warning message illuminateson the service reminder mode ifthe washer fluid level in the reser-voir is nearly empty.

• It means that you should refill thewasher fluid.





OYDDDI2016/OYDNDI2030

OYDNDI2052


■ Type C


704

Turn on "FUSE SWITCH" (if equipped)

• This warning message illuminatesif the fuse switch on the fuse box isOFF.

• It means that you should turn thefuse switch on.

For more details, refer to "Fuses" inchapter 7.

OYDDDI2015/OYDEDI2066

OYDEDI2054


■ Type C

4 71


OverviewDescriptionThe trip computer is a microcomput-er-controlled driver information sys-tem that displays information relatedto driving.

✽✽ NOTICESome driving information stored inthe trip computer (for exampleAverage Vehicle Speed) resets if thebattery is disconnected.

Trip Modes• Type A ClusterTo change the trip mode, press the"TRIP" button.

• Type B, C ClusterTo change the trip mode, press theMOVE button ▼.

TRIP COMPUTER

• Tripmeter [A]

• Average Vehicle Speed [A]

• Elapsed Time [A]

TRIP A

• Tripmeter [B]

• Average Vehicle Speed [B]

• Elapsed Time [B]

TRIP B

• Range

• Average Fuel Economy

• Instant Fuel Economy

FUEL ECONOMY


724

Fuel EconomyRange

• The range is the estimated dis-tance the vehicle can be drivenwith the remaining fuel.

- Distance range : 50 ~ 9999 km or30 ~ 9999 mi.

• If the estimated distance is below50 km (30 mi.), the trip computerwill display "---" as distance toempty.

✽✽ NOTICE• If the vehicle is not on level ground

or the battery power has beeninterrupted, the distance to emptyfunction may not operate correct-ly.

• The distance to empty may differfrom the actual driving distance asit is an estimate of the availabledriving distance.

• The trip computer may not regis-ter additional fuel if less than 6liters (1.6 gallons) of fuel areadded to the vehicle.

• The fuel economy and distance toempty may vary significantlybased on driving conditions, driv-ing habits, and condition of thevehicle.

Average Fuel Economy (2)• The average fuel economy is cal-

culated by the total driving dis-tance and fuel consumption sincethe last average fuel economyreset.- Fuel economy range: 0.0 ~ 99.9

L/100km or MPG• The average fuel economy can be

reset both manually and automati-cally.

Manual resetTo clear the average fuel economymanually, press the RESET button(Type A : RESET, Type B, C : ) onthe steering wheel for more than 1second when the average fuel econ-omy is displayed.


OYDNDI2056C


■ Type C

4 73


Automatic resetTo make the average fuel economybe reset automatically whenever refu-eling, select the "Auto Reset" mode inUser Setting menu of the LCD display(Refer to "LCD Display").Under "Auto Reset" mode, the aver-age fuel economy will be cleared tozero (---) when the vehicle speedexceeds 1 km/h after refueling morethan 6 liters (1.6 gallons).

✽✽ NOTICEThe average fuel economy is not dis-played for more accurate calculationif the vehicle does not drive morethan 10 seconds or 50 meters (0.03miles) since the ignition switch orEngine Start/Stop button is turnedto ON.

Instant Fuel Economy (3)• This mode displays the instant fuel

economy during the last few sec-onds when the vehicle speed ismore than 10 km/h (6.2 MPH).- Fuel economy range: 0 ~ 30

L/100km or 0 ~ 50 MPG

Trip A/BTripmeter (1)

• The tripmeter is the total driving dis-tance since the last tripmeter reset.- Distance range: 0.0 ~ 9999.9 km or

mi.


OYDNDI2055C


■ Type C


744

• To reset the tripmeter, press theRESET button (Type A : RESET,Type B, C : ) on the steeringwheel for more than 1 secondwhen the tripmeter is displayed.

Average Vehicle Speed (2)• The average vehicle speed is cal-

culated by the total driving dis-tance and driving time since thelast average vehicle speed reset.- Speed range: 0 ~ 999 km/h or MPH

• To reset the average vehicle speed,press the RESET button (Type A :RESET, Type B, C : ) on thesteering wheel for more than 1 sec-ond when the average vehiclespeed is displayed.

✽✽ NOTICE• The average vehicle speed is not dis-

played if the driving distance is lessthan 50 meters (0.03 miles) or thedriving time is less than 10 secondssince the ignition switch or EngineStart/Stop button is turned to ON.

• Even if the vehicle is not in motion,the average vehicle speed keepsgoing while the engine is running.

Elapsed Time (3)• The elapsed time is the total driv-

ing time since the last elapsed timereset.- Time range (hh:mm): 00:00 ~ 99:59

• To reset the elapsed time, pressthe RESET button (Type A :RESET, Type B, C : ) on thesteering wheel for more than 1second when the elapsed time isdisplayed.

✽✽ NOTICEEven if the vehicle is not in motion,the elapsed time keeps going whilethe engine is running.

4 75


Warning lights

✽✽ NOTICE - Warning lightsMake sure that all warning lightsare OFF after starting the engine. Ifany light is still ON, this indicates asituation that needs attention.

Air bag Warning Light

This warning light illuminates:• Once you set the ignition switch or

Engine Start/Stop Button to the ONposition.- It illuminates for approximately 6

seconds and then goes off.• When there is a malfunction with

the SRS.In this case, have your vehicleinspected by an authorized Kiadealer.

Seat Belt Warning Light

This warning light informs the driverthat the seat belt is not fastened.For more details, refer to the "SeatBelts" in chapter 3.

WARNING AND INDICATOR LIGHTS


764

Parking Brake & BrakeFluid Warning Light



seconds- It remains on if the parking brake

is applied.• When the parking brake is applied.• When the brake fluid level in the

reservoir is low.- If the warning light illuminates

with the parking brake released, itindicates the brake fluid level inreservoir is low.

If the brake fluid level in the reservoiris low:1.Drive carefully to the nearest safe

location and stop your vehicle.2.With the engine stopped, check the

brake fluid level immediately andadd fluid as required (For moredetails, refer to "Brake Fluid" inchapter 7).Then check all brake componentsfor fluid leaks. If any leak on thebrake system is still found, thewarning light remains on, or thebrakes do not operate properly, donot drive the vehicle.In this case, have your vehicletowed to an authorized Kia dealerand inspected.

Dual-diagonal braking systemYour vehicle is equipped with dual-diagonal braking systems. Thismeans you still have braking on twowheels even if one of the dual sys-tems should fail.With only one of the dual systemsworking, more than normal pedaltravel and greater pedal pressure arerequired to stop the vehicle.Also, the vehicle will not stop in asshort a distance with only a portionof the brake system working.If the brakes fail while you are driv-ing, shift to a lower gear for addition-al engine braking and stop the vehi-cle as soon as it is safe to do so.

4 77


Anti-lock Brake System(ABS) Warning Light




the ABS (The normal braking sys-tem will still be operational withoutthe assistance of the anti-lockbrake system).In this case, have your vehicleinspected by an authorized Kiadealer.

ElectronicBrake forceDistribution(EBD) SystemWarning LightThese two warning lights illuminate atthe same time while driving:• When the ABS and regular brake

system may not work normally.In this case, have your vehicleinspected by an authorized Kiadealer.

WARNING - ParkingBrake & Brake FluidWarning Light

Driving the vehicle with a warn-ing light ON is dangerous. If theParking Brake & Brake FluidWarning Light illuminates withthe parking brake released, itindicates that the brake fluidlevel is low.In this case, have your vehicleinspected by an authorized Kiadealer.


784

✽✽ NOTICE - Electronic Brakeforce Distribution(EBD) SystemWarning Light

When the ABS Warning Light is onor both ABS and Parking Brake &Brake Fluid Warning Lights are on,the speedometer, odometer, or trip-meter may not work. Also, the EPSWarning Light may illuminate andthe steering effort may increase ordecrease.In this case, have your vehicle inspect-ed by an authorized Kia dealer assoon as possible.

Electronic PowerSteering (EPS) WarningLight (if equipped)


Engine Start/Stop Button to the ONposition.- It remains on until the engine is

started.• When there is a malfunction with

the EPS.In this case, have your vehicleinspected by an authorized Kiadealer.

WARNING - ElectronicBrake force Distribution(EBD) System Warning Light

When both ABS and ParkingBrake & Brake Fluid WarningLights are on and stay on, thebrake system will not work nor-mally during sudden braking.In this case, avoid high speeddriving and abrupt braking.Have your vehicle inspected byan authorized Kia dealer assoon as possible.

4 79


Malfunction IndicatorLamp (MIL)




the emission control system.In this case, have your vehicleinspected by an authorized Kiadealer.

Charging SystemWarning Light




either the alternator or electricalcharging system.

CAUTION - MalfunctionIndicatorLamp (MIL)

Driving with the MalfunctionIndicator Lamp (MIL) on maycause damage to the emissioncontrol systems which couldeffect drivability and/or fueleconomy.

CAUTION - GasolineEngine

If the Malfunction IndicatorLamp (MIL) illuminates, poten-tial catalytic converter damageis possible which could result inloss of engine power.In this case, have your vehicleinspected by an authorized Kiadealer as soon as possible.


804

If there is a malfunction with eitherthe alternator or electrical chargingsystem:1. Drive carefully to the nearest safe

location and stop your vehicle.2. Turn the engine off and check the

alternator drive belt for loosenessor breakage.If the belt is adjusted properly,there may be a problem in theelectrical charging system.In this case, have your vehicleinspected by an authorized Kiadealer as soon as possible.

Engine CoolantTemperature WarningLight (if equipped)

This warning light illuminates:• When the engine coolant tempera-

ture is above 120°C (248°F). Thismeans that the engine is overheat-ed and may be damaged.If your vehicle is overheated, referto "Overheating" in chapter 6.

Engine Oil PressureWarning Light



started.• When the engine oil pressure is low.

If the engine oil pressure is low:1. Drive carefully to the nearest safe

location and stop your vehicle.2. Turn the engine off and check the

engine oil level (For more details,refer to "Engine Oil" in section 7).If the level is low, add oil asrequired.If the warning light remains onafter adding oil or if oil is not avail-able, have your vehicle inspectedby an authorized Kia dealer assoon as possible.

CAUTION - EngineOverheating

Do not drive the vehicle whenthe Engine Coolant TemperatureWarning Light is illuminated orthe engine is overheated.Continuing to drive the vehiclewhile it is overheated may dam-age the engine.

4 81


Low Fuel Level WarningLight

This warning light illuminates:When the fuel tank is nearly empty.

If the fuel tank is nearly empty:Add fuel as soon as possible.

CAUTION - Engine OilPressureWarning Light

• If the engine is not stoppedimmediately after the EngineOil Pressure Warning Light isilluminated, severe damagecould result.

• If the warning light stays onwhile the engine is running,there may be serious enginedamage. In this case,1. Stop the vehicle as soon as

it is safe to do so.2. Turn off the engine and

check the oil level. If the oillevel is low, fill the engineoil to the proper level.

3. Start the engine again. If thewarning light stays on afterthe engine is started, turnthe engine off immediately.In this case, have your vehi-cle inspected by an author-ized Kia dealer.

CAUTION - Low FuelLevel

Driving with the Low Fuel Levelwarning light on or with the fuellevel below can cause theengine to misfire and damagethe catalytic converter (ifequipped).


824

Door Ajar Warning Light

This warning light illuminates:When a door is not closed securely.

Tailgate Open WarningLight

This warning light illuminates:When the tailgate is not closedsecurely.

Washer Fluid WarningLight (if equipped)

This warning light illuminates:• When the washer fluid level in the

reservoir is nearly empty.In this case, you should refill thewasher fluid.

Indicator LightsElectronic StabilityControl (ESC) IndicatorLight (if equipped)This indicator light illuminates:• Once you set the ignition switch or



the ESC system.In this case, have your vehicleinspected by an authorized Kiadealer.

This indicator light blinks:While the ESC is operating.

For more details, refer to "ElectronicStability Control (ESC)" in chapter 5.

4 83


Electronic StabilityControl (ESC) OFFIndicator Light (if equipped)This indicator light illuminates:• Once you set the ignition switch or


seconds and then goes off.• When you deactivate the ESC sys-

tem by pressing the ESC OFF but-ton.

For more details, refer to "ElectronicStability Control (ESC)" in chapter 5.

ECOMINDER® indicatorActive ECO system

This indicator light illuminates:When the Active ECO button ispressed the ECOMINDER® indicator(green) will illuminate to show thatthe Active ECO is operating.For more detailed information, referto "Active ECO" in chapter 5.

Immobilizer IndicatorLight (Without Smart Key)

This indicator light illuminates:• When the vehicle detects the

immobilizer in your key properlywhile the ignition switch is ON.- At this time, you can start the

engine.- The indicator light goes off after

starting the engine.

This indicator light blinks:• When there is a malfunction with

the immobilizer system.In this case, have your vehicleinspected by an authorized Kiadealer.

ECO


844

Immobilizer IndicatorLight (With Smart Key)

This indicator light illuminates for upto 30 seconds:• When the vehicle detects the

smart key in the vehicle properlywhile the Engine Start/Stop Buttonis ACC or ON.- At this time, you can start the

engine.- The indicator light goes off after

starting the engine.

This indicator light blinks for a fewseconds:• When the smart key is not in the

vehicle.- At this time, you can not start the

engine.

This indicator light illuminates for 2seconds and goes off:• When the vehicle can not detect

the smart key which is in the vehi-cle while the Engine Start/StopButton is ON.In this case, have your vehicleinspected by an authorized Kiadealer.

This indicator light blinks:• When the battery of the smart key

is weak.- At this time, you can not start the

engine. However, you can startthe engine if you press the EngineStart/Stop Button with the smartkey. (For more details, refer to"Starting the Engine" in section5).

• When there is a malfunction withthe immobilizer system.In this case, have your vehicleinspected by an authorized Kiadealer.

Turn Signal IndicatorLight

This indicator light blinks:• When you turn the turn signal light

on.

If any of the following occurs, theremay be a malfunction with the turnsignal system. In this case, have yourvehicle inspected by an authorizedKia dealer.

- The indicator light does not blinkbut illuminates.

- The indicator light blinks morerapidly.

- The indicator light does not illumi-nate at all.

4 85


High Beam IndicatorLight

This indicator light illuminates:• When the headlights are on and in

the high beam position• When the turn signal lever is pulled

into the Flash-to-Pass position.

Light ON Indicator Light

This indicator light illuminates:• When the tail lights or headlights

are on.

Front Fog IndicatorLight (if equipped)

This indicator light illuminates:• When the front fog lights are on.

Cruise Indicator Light (if equipped)

This indicator light illuminates:• When the cruise control system is

enabled.

For more details, refer to "CruiseControl System" in chapter 5.

Cruise SET IndicatorLight (if equipped)

This indicator light illuminates:• When the cruise control speed is set.

For more details, refer to "CruiseControl System" in chapter 5.

KEY OUT Indicator Light(if equipped)

When the ENGINE START/STOPbutton is in the ACC or ON position,if any door is open, the systemchecks for the smart key.

This indicator light blinks:When the smart key is not in thevehicle and any door is open with theignition switch or Engine Start/Stopbutton in the ACC or ON position.- At this time, if you close all doors,

the chime will also sound forapproximately 5 seconds.

- The indicator will go off while thevehicle is moving.

CRUISE

SET

KEYOUT


864

The parking assist system assiststhe driver during movement of thevehicle by chiming if any object issensed within the distance of 60 cm(23.62 in) in front or 120 cm (47 in)behind the vehicle.

This system is a supplemental sys-tem and it is not intended to nor doesit replace the need for extreme careand attention of the driver.The sensing range and objectsdetectable by the sensors are limit-ed. Whenever moving pay as muchattention to what is in front of andbehind you as you would in a vehiclewithout a parking assist system.

PARKING ASSIST SYSTEM (IF EQUIPPED)

WARNINGThe parking assist systemshould only be considered as asupplementary function. Thedriver must check the front andrear view. The operational func-tion of the parking assist systemcan be affected by many factorsand conditions of the surround-ings, so the responsibility restsalways with the driver.

OYDECO2201CN

OYDDCO2200

Sensor

■ Rear

■ Front

Sensor

4 87


Operation of the parking assistsystemOperating condition

• This system will activate when theparking assist button is pressedwith the engine running.

• Sensing distance in backing up isapproximately 120 cm (47 in) whenyou are driving less than 10 km/h(6.21 mph ).

• Sensing distance in moving for-ward is approximately 60 cm(23.62 in) when you are drivingless than 10 km/h (6.21 mph).

• When more than two objects aresensed at the same time, the clos-est one will be recognized first.

• If you move the shift lever to the Rposition with the engine start/stopbutton in the ON position and theparking assist system in OFF, theparking assist system will operateautomatically. But it will turn offautomatically, when the vehiclespeed exceeds than 20km/h(12.4 mph)

✽✽ NOTICEThe parking assist system may notoperate if it’s distance from the objectis already less than approximately 25cm (9.84 in) when the system is ON.

OYDDCO2202

OYDDCO2228

■ Type B

■ Type A


884

✽✽ NOTICE• The actual warning sound and indicator may differ from the illustration

according to objects or sensor status.• Do not wash the vehicle's sensor with high pressure water.

Distance from object Warning indicator

Warning soundWhen driving

forwardWhen driving

rearward

120cm~61cm(47in ~ 24)

Front - - -

Rear -Buzzer beeps intermittently

60cm~31cm(23.6in ~ 12.2)

FrontBuzzer beeps

frequently

Rear -Buzzer beeps

frequently

30cm(11.8 in)

FrontBuzzer sounds continuously

Rear -Buzzer sounds continuously

Type of warning indicator and sound: with Warning sound CAUTION

• This system can only senseobjects within the range andlocation of the sensors;It can not detect objects inother areas where sensors arenot installed. Also, small orslim objects, such as poles orobjects located between sen-sors may not be detected bythe sensors.Always visually check behindthe vehicle when backing up.

• Be sure to inform any driversof the vehicle that may beunfamiliar with the systemregarding the systems capa-bilities and limitations.

4 89


Non-operational conditions ofparking assist systemParking assist system may notoperate when:1. Moisture is frozen to the sensor. (It

will operate normally when mois-ture melts.)

2. Sensor is covered with foreignmatter, such as snow or water, orthe sensor cover is blocked. (It willoperate normally when the materi-al is removed or the sensor is nolonger blocked.)

3. Sensor is stained with foreign mat-ter such as snow or water.(Sensing range will return to nor-mal when removed.)

There is a possibility that the park-ing assist system may not operatewhen:1. Driving on uneven road surfaces

such as unpaved roads, gravel,bumps, or gradient.

2. Objects generating excessive noisesuch as vehicle horns, loud motor-cycle engines, or truck air brakesinterfere with the sensor.

3. Heavy rain or water spray.4. Wireless transmitters or mobile

phones are present near the sen-sor.

5. Sensor is covered with snow.

Detection range may decreasewhen:1. Outside air temperature is

extremely hot or cold.2. There are undetectable objects

smaller than 1 m (39.37 in) andnarrower than 14 cm (5.51 in) indiameter.

The following objects may not berecognized by the sensor:1. Sharp or slim objects such as

ropes, chains or small poles.2. Objects, which tend to absorb sen-

sor frequency such as clothes,spongy material or snow.


904

✽✽ NOTICE1. The warning may not sound

sequentially depending on thespeed and shapes of the objectsdetected.

2. The parking assist system maymalfunction if the vehicle bumperheight or sensor installation hasbeen modified. Any non-factoryinstalled equipment or accessoriesmay also interfere with the sensorperformance.

3. Sensor may not recognize objectsless than 30 cm (11.81 in) from thesensor, or it may sense an incor-rect distance. Use with caution.

4. When the sensor is frozen orstained with snow or water, thesensor may be inoperative untilthe stains are removed using asoft cloth.

5. Do not push, scratch or strike thesensor with any hard objects thatcould damage the surface of thesensor. Sensor damage could occur.

✽✽ NOTICEThis system can only sense objectswithin the range and location of thesensors, it can not detect objects inother areas where sensors are notinstalled. Also, small or slim objects,or objects located between sensorsmay not be detected. Always visually check in front andbehind the vehicle when driving.Be sure to inform any drivers in thevehicle that may be unfamiliar withthe system regarding the system’scapabilities and limitations.

WARNINGPay close attention when thevehicle is driven close toobjects on the road, particularlypedestrians, and especiallychildren. Be aware that someobjects may not be detected bythe sensors, due to the objectsdistance, size or material, all ofwhich can limit the effective-ness of the sensor. Always per-form a visual inspection tomake sure the vehicle is clear ofall obstructions before movingthe vehicle in any direction.

4 91


Self-diagnosisWhen you shift the gear to the R(Reverse) position and if one or moreof the below occurs you may have amalfunction in the rear parking assistsystem.• You don't hear an audible warning

sound or if the buzzer sounds inter-mittently.

have your vehicle checked byanauthorized Kia dealer as soon aspossible.

(blinks)

• is displayed. (if equipped)


924

The rear view camera will activatewith the ignition switch on and theshift lever in the R (Reverse) position.

Note- during initial start up, systemmay not display instantly due to theaudio system booting up.

2 ~ 4 seconds may be requiredbefore displaying during initialreverse selection. This occurs whenstarting and immediately shifting toreverse.This system is a supplemental sys-tem that shows behind the vehiclethrough the UVO audio or navigationdisplay backing-up.Always keep the camera lens clean. Iflens is covered with foreign matter,the camera may not operate normally.

REARVIEW CAMERA (IF EQUIPPED)

OYDDCO2203

WARNING - Rearview camera

The rearview camera is not asubstitute for proper and safebacking-up procedures. Alwaysdrive safely and use cautionwhen backing up. The rearviewcamera may not display everyobject behind the vehicle.

WARNING - Backing &using camera

Never rely solely on the rearview camera when backing.

4 93


Battery saver function• The purpose of this feature is to

prevent the battery from being dis-charged. The system automaticallyturns off the parking lights whenthe driver removes the ignition keyand opens the driver-side door.

• With this feature, the parking lightswill turn off automatically if the driv-er parks on the side of the road atnight.If necessary, to keep the lights onwhen the ignition key is removed,perform the following:1) Open the driver-side door.2) Turn the parking lights OFF and

ON again using the light switchon the steering column.

Headlight escort function (if equipped)The headlights (and/or taillights) willremain on for approximately 20 min-utes after the ignition key is removedor turned to the ACC or LOCK posi-tion. However, if the driver’s door isopened and closed, the headlightsare turned off after 30 seconds.The headlights can be turned off bypressing the lock button on the trans-mitter (or smart key) twice or turningoff the light switch from the headlightor Auto light position.

LIGHTING

WARNINGIf the headlights are not work-ing properly have your vehicleinspected by an authorized Kiadealer.Don't attempt to inspect orreplace the wiring yourself toprevent malfunction.

CAUTIONIf the driver gets out of the vehi-cle through other doors (exceptdriver's door), the battery saverfunction does not operate andthe headlight escort functiondoes not turn off automatically.Therefore, It causes the batteryto be discharged. In this case,make sure to turn off the lampbefore getting out of the vehicle.


944

Daytime running light Daytime Running Lights (DRL) canmake it easier for others to see thefront of your vehicle during the day.DRL can be helpful in many differentdriving conditions, and it is especiallyhelpful after dawn and before sunset.The DRL system turns OFF when:1. The position lights or headlights

are ON.2. The parking brake is applied.3. Engine stops.

Lighting control

The light switch has a Headlight anda Parking light position.To operate the lights, turn the knob atthe end of the control lever to one ofthe following positions:(1) OFF position(2) Parking light position(3) Headlight position(4) Auto light position (if equipped)

Parking light position ( )

When the light switch is in the park-ing light position (1st position), thetail, position, license and instrumentpanel lights will turn ON.

OAM049041OXM049110

4 95


Headlight position ( )

When the light switch is in the head-light position (2nd position) the head,tail, position, license and instrumentpanel lights will turn ON.The ignition switch must be in the ONposition to turn on the headlights.

Auto light position (if equipped)

When the light switch is in the AUTOlight position, the taillights and head-lights will turn ON or OFF automati-cally depending on the amount oflight outside the vehicle.Never place anything over the sensor(1) located on the instrument panel.This will ensure better auto-light sys-tem control.Do not clean the sensor using a win-dow cleaner, the cleaner may leave alight film which could interfere withsensor operation.

If your vehicle has window tint orother types of metallic coating on thefront windshield, the Auto light sys-tem may not work properly.

OYDDCO2042OAM049042


964

High beam operation

To turn on the high beam headlights,push the lever away from you. Pull itback for low beams.The high-beam indicator will lightwhen the headlight high beams areswitched on.To prevent the battery from beingdischarged, do not leave the lightson for a prolonged time while theengine is not running.

To flash the headlights, pull the levertowards you. It will return to the normal(low-beam) position when released.The headlight switch does not need tobe on to use this flashing feature.

OAM049044

WARNING - High beamsDo not use high beam whenthere are other vehicles. Usinghigh beam could obstruct theother driver's vision.

OAM049043

4 97


Turn signals and lane changesignals

The ignition switch must be on for theturn signals to function. To turn onthe turn signals, move the lever up ordown (A). The green arrow indicatorson the instrument panel indicatewhich turn signal is operating. Theywill self-cancel after a turn is com-pleted. If the indicator continues toflash after a turn, manually return thelever to the OFF position.To signal a lane change, move theturn signal lever slightly and hold it inposition (B). The lever will return tothe OFF position when released.

If an indicator stays on and does notflash or if it flashes abnormally, one ofthe turn signal bulbs may be burnedout and will require replacement.If an indicator flash is abnormallyquick or slow, a bulb may be burnedout or have a poor electrical connec-tion in the circuit.

One-touch lane change functionTo activate an one-touch lanechange function, move the turn sig-nal lever slightly and then release it.The lane change signals will blink 3,5 or 7 times.You can choose one-touch lanechange blinking function in "Onetouch turn lamp" of "User setting".Refer to "User setting" in chapter 4.

✽✽ NOTICEIf an indicator flash is abnormallyquick or slow, the bulb may beburned out or have a poor electricalconnection in the circuit.

OAM049045


984

Front fog light (if equipped)

Fog lights are used to provideimproved visibility when visibility ispoor due to fog, rain or snow, etc. Thefog lights will turn on when the fog lightswitch (1) is turned to the on positionafter the headlights are turned on.To turn off the fog lights, turn theswitch (1) to the off position.When in operation, the fog lightsconsume large amounts of vehicleelectrical power. Only use the foglights when visibility is poor.

OAM049046N

4 99


A : Wiper speed control (front)· HI – High wiper speed· LO – Low wiper speed· INT – Intermittent wipe · AUTO* – Automatic control wipe· OFF – Off· MIST – Single wipe

B : Intermittent control wipe timeadjustment

C : Wash with brief wipes (front)

* : if equipped

Windshield wipersOperates as follows when the igni-tion switch is turned ON.MIST : For a single wiping cycle,

push the lever upward andrelease it. The wipers willoperate continuously if thelever is held in this position.

OFF : Wiper is not in operationINT : Wiper operates intermittently at

the same wiping intervals. Usethis mode in a light rain or mist.To vary the speed setting, turnthe speed control knob.

LO : Normal wiper speedHI : Fast wiper speed

If there is a heavy accumulation ofsnow or ice on the windshield, defrostthe windshield for about 10 minutes,or until the snow and/or ice isremoved before using the windshieldwipers to ensure proper operation.

Windshield washers

In the OFF position, pull the levergently toward you to spray washerfluid on the windshield and to run thewipers 1-3 cycles.Use this function when the wind-shield is dirty.The spray and wiper operation willcontinue until you release the lever. Ifthe washer does not work, check thewasher fluid level.If the fluid level is not sufficient, youadd appropriate non-abrasive wind-shield washer fluid to the washerreservoir.

WIPERS AND WASHERS

OAM049100L

Front

OYF049101


1004

The reservoir filler neck is located inthe front of the engine compartmenton the passenger side.

CAUTION - Washer pumpTo prevent possible damage tothe washer pump, do not oper-ate the washer when the fluidreservoir is empty.

WARNING - Obscuredvisibility

Do not use the washer in freez-ing temperatures without firstwarming the windshield withthe defrosters; the washer solu-tion could freeze on the wind-shield and obscure your vision.

CAUTION - Wipers & windshields

• To prevent possible damageto the wipers or windshield,do not operate the wiperswhen the windshield is dry.

• To prevent damage to thewiper blades, do not use gaso-line, kerosene, paint thinner,or other solvents on or nearthem.

• To prevent damage to thewiper arms and other compo-nents, do not attempt to movethe wipers manually.

4 101


Do not use the interior lights forextended periods when the engine isnot running.It may cause battery discharge.

Automatic turn off function (if equipped)The interior lights automatically turnoff approximately 20 minutes afterthe ignition switch is turned off.If your vehicle is equipped with thetheft alarm system, the interior lightsautomatically turn off approximately3 seconds after the system is inarmed stage.

Map lamp (if equipped)

Push the lens (1) to turn the map lampon or off. This light produces a spotbeam for convenient use as a maplamp at night or as a personal lamp forthe driver and front passenger.

INTERIOR LIGHT

WARNING - Interior lightDo not use the interior lightswhen driving in the dark. Theglare from the interior lightsmay obstruct your view andcause an accident.

OYDDCO2043

OYDDCO2044

■ Type B

■ Type A


1024

• DOOR (2) :In the DOOR position, the maplamp and the room lamp come onwhen any door is opened regard-less of the ignition switch position.When doors are unlocked by thetransmitter (or smart key), the maplamp and the room lamp come onfor approximately 30 seconds aslong as any door is not open.The map lamp and the room lampgo out gradually after approximate-ly 30 seconds if the door is closed.However, if the ignition switch isON or all doors are locked, themap lamp and the room lamp willturn off immediately. If a door isopened with the ignition switch inthe ACC or LOCK position, themap lamp and the room lamp stayson for about 20 minutes. However,if a door is opened with the ignitionswitch in the ON position, the maplamp and the room lamp stays oncontinuously. If the type B roomlamp switch is OFF, it doesn't work.

• OFF (3) : The lights turn off even ifa door is opened.When the lamp isturned ON by pressingthe lens (1), the lampdoes not turn off evenif the switch (2) is in theOFF position.

• ON (4) : The map lamp and theroom lamp stay on at alltimes.

Room lamp

To turn the room lamp ON or OFF,push the switch.If your vehicle is not equipped with amap lamp, the room lamp will alsoturn on or off as follows.

- The room lamp comes on when adoor is opened. The lamps go outafter approximately 30 seconds.

- The room lamp comes on forapproximately 30 seconds whendoors are unlocked with a trans-mitter or smart key as long as thedoors are not opened.

OMD040097

4 103


- The room lamp will stay on forapproximately 20 minutes if adoor is opened with the ignitionswitch in the ACC or LOCK/OFFposition.

- The room lamp will stay on con-tinuously if the door is openedwith the ignition switch in the ONposition.

- The room lamp will go out imme-diately if the ignition switch ischanged to the ON position or alldoors are locked.

Trunk room lamp

The trunk room lamp comes onwhen the trunk is opened.

Glove box lamp

The glove box lamp comes on whenthe glove box is opened.The parking lights or headlights mustbe ON for the glove box lamp to func-tion.

OYDDCO2045 OYDDCO2046

CAUTIONThe trunk room lamp comes onas long as the trunk lid opens.To prevent unnecessary charg-ing system drain, close thetrunk lid securely after using thetrunk.

CAUTIONTo prevent unnecessary charg-ing system drain, close theglove box securely after use.


1044

Vanity mirror lamp (if equipped)

Push the switch to turn the light on oroff.• : The lamp will turn on if this

button is pressed.• : The lamp will turn off if this

button is pressed.Always have the switch in the offposition when the vanity mirror lampis not in use. If the sunvisor is closedwithout turning the lamp off, it maydischarge the battery or damage thesunvisor.

OLM049105

4 105


Headlamp welcome

When the headlight(light switch in theheadlight or AUTO position) is on andall doors (and trunk) are locked andclosed, the headlight, position lightand tail light will come on for 15 sec-onds if any of the below is performed.• Without smart key system

- When the door unlock button ispressed on the transmitter.

• With the smart key system- When the door unlock button is

pressed on the smart key.

At this time, if you press the door lockbutton (on the transmitter or smartkey), the lights will turn off immediately.

Interior light welcomeWhen the interior light switch is in theDOOR position and all doors (andtrunk) are locked and closed, theroom lamp will come on for 30 sec-onds if any of the below is performed.• Without smart key system

- When the door unlock button ispressed on the transmitter.

• With the smart key system- When the door unlock button is

pressed on the smart key.- When the button of the outside

door handle is pressed.

At this time, if you press the door lockbutton, the lamps will turn off imme-diately.

Puddle lamp and pocket lamp(if equipped)When all doors are locked andclosed, the puddle lamp and pocketlamp will come on for 15 seconds ifany of the below is performed.• With the smart key system

- When the door unlock button ispressed on the smart key.

- When the button of the outsidedoor handle is pressed.

- When the vehicle is approachedwith the smart key in possession.

At this time, if you press the door lockbutton, the lamps will turn off imme-diately.

WELCOME SYSTEM (IF EQUIPPED)

OYDNCO3047


1064

If you want to defrost and defog thefront windshield, refer to "WindshieldDefrosting and Defogging" in thissection.

Rear window defroster

The defroster heats the window toremove frost, fog and thin ice fromthe interior and exterior of the rearwindow, while the engine is running.To activate the rear windowdefroster, press the rear windowdefroster button located in the centerfacia switch panel. The indicator onthe rear window defroster button illu-minates when the defroster is on.If there is heavy accumulation ofsnow on the rear window, brush it offbefore operating the rear defroster.

The rear window defroster automati-cally turns off after approximately 20minutes or when the ignition switch isturned off. To turn off the defrostermanually, press the rear windowdefroster button again.

Outside mirror defroster (if equipped)If your vehicle is equipped with theoutside rearview mirror defrosters,they will operate at the same time youturn on the rear window defroster.

Front wiper deicer (if equipped)If your vehicle is equipped with thefront wiper deicer, it will be operatingat the same time you operate thefront windshield defroster.

DEFROSTER

OYDDCL2001

CAUTION - ConductorsTo prevent damage to the con-ductors bonded to the insidesurface of the rear window,never use sharp instruments orwindow cleaners containingabrasives to clean the window.


4 107


MANUAL CLIMATE CONTROL SYSTEM

1. Fan speed control knob2. Mode selection knob3. Temperature control knob

4. Air conditioning button5. Air intake control button6. Rear window defroster button

OYDDCL2002


1084

Heating and air conditioning1. Start the engine.2. Set the mode to the desired posi-

tion.To improve the effectiveness ofheating and cooling :- Heating:- Cooling:

3. Set the temperature control to thedesired position.

4. Set the air intake control to theoutside (fresh) air or recirculatedair position.

5. Set the fan speed control to thedesired speed.

6. If air conditioning is desired, turnthe air conditioning system (ifequipped) on.

OYDECL2004CN

(if equipped)(if equipped)

4 109


Mode selection

The mode selection knob controlsthe direction of the air flow throughthe ventilation system.Air can be directed to the floor, dash-board outlets, or windshield. Sixsymbols are used to represent Face,Bi-Level, Floor, Floor-Defrost andDefrost air position.

Face-Level (B, C, D, E, F)

Air flow is directed toward the upperbody and face. Additionally, eachoutlet can be controlled to direct theair discharged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is directed towards the faceand the floor.

Floor-Level (A, C, D, E)

Most of the air flow is directed to thefloor, with a small amount of the airbeing directed to the windshield andside window defrosters.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to thefloor and the windshield with a smallamount directed to the side windowdefrosters.

Defrost-Level (A, D)

Most of the air flow is directed to thewindshield with a small amount of airdirected to the side window defrosters.

OYDDCL2003


1104

MAX A/C-Level (B, D) (if equipped)

The MAX A/C mode is used to coolthe inside of the vehicle faster. Airflow is directed toward the upperbody and face.In this mode, the air conditioning andthe recirculated air position will beselected automatically.

Instrument panel ventsThe outlet vents can be opened orclosed separately using the thumb-wheel.Also, you can adjust the direction ofair delivered from these vents usingthe vent control lever as shown.

Temperature control

The temperature control knob allowsyou to control the temperature of theair flowing from the ventilation sys-tem.To change the air temperature inthe passenger compartment, turnthe knob to the right for warm air orleft for cooler air.

OYDDCL2005 OYDDCL2007

OYDECL2006

4 111


Air intake control

This is used to select outside (fresh)air position or recirculated air position.To change the air intake control posi-tion, push the control button.

Recirculated air positionThe indicator light on thebutton illuminates whenthe recirculated air posi-tion is selected.With the recirculated airposition selected, airfrom the passengercompartment will bedrawn through the heat-ing system and heatedor cooled according tothe function selected.

Outside (fresh) air positionThe indicator light on thebutton will not illuminatewhen the outside (fresh)air position is selected.With the outside (fresh)air position selected, airenters the vehicle fromoutside and is heated orcooled according to thefunction selected.

Prolonged operation of the heater inthe recirculated air position (without airconditioning selected) may cause fog-ging of the windshield and side win-dows and the air within the passengercompartment may become stale.In addition, prolonged operation ofthe air conditioning with the recircu-lated air position selected will resultin excessively dry air in the passen-ger compartment.

OYDDCL2008


1124

Fan speed control

The ignition switch must be in the ONposition for fan operation.The fan speed control knob allowsyou to control the fan speed of the airflowing from the ventilation system.To change the fan speed, turn theknob to the right for higher speed orleft for lower speed.Setting the fan speed control knob tothe "0" position turns off the fan.

To turn off the blowers

To turn off the blowers, turn the fanspeed control knob to the "0" posi-tion.

WARNING• Continuous use of the climate

control system in the recircu-lated air position may allowhumidity to increase insidethe vehicle which may fog theglass and obscure visibility.

• Do not sleep in a vehicle withthe air conditioning or heatingsystem on. It may cause seri-ous harm or death due to adrop in the oxygen leveland/or body temperature.

• Continue using the climatecontrol system in the recircu-lated air position can causedrowsiness or sleepiness, andloss of vehicle control. Set theair intake control to the outside(fresh) air position as much aspossible while driving.


4 113


Air conditioning (if equipped)

Press the A/C button to turn the airconditioning system on (indicator lightwill illuminate). Press the button againto turn the air conditioning system off.

System operationVentilation1. Set the mode to the position.2. Set the air intake control to the

outside (fresh) air position.3. Set the temperature control to the

desired position.4. Set the fan speed control to the

desired speed.

Heating1. Set the mode to the position.2. Set the air intake control to the



desired speed.5. If dehumidified heating is desired,

turn the air conditioning system (ifequipped) on.

• If the windshield fogs up, set themode to the , position.

Operation Tips• To prevent dust or unpleasant

fumes from entering the vehiclethrough the ventilation system,temporarily set the air intake con-trol to the recirculated air position.Be sure to return the control to thefresh air position when the irritationhas passed to keep fresh air in thevehicle. This will help keep the driv-er alert and comfortable.

• Air for the heating/cooling systemis drawn in through the grilles justahead of the windshield. Careshould be taken that these are notblocked by leaves, snow, ice orother obstructions.

• To prevent interior fog on the wind-shield, set the air intake control tothe fresh air position and fan speedto the desired position, turn on theair conditioning system, and adjustthe temperature control to desiredtemperature.

OYDDCL2010


1144

Air conditioning (if equipped) Kia Air Conditioning Systems arefilled with R-134a refrigerant.1. Start the engine. Push the air con-

ditioning button.2. Set the mode to the position.3. Set the air intake control to the

recirculated air position. However,prolonged operation in the recircu-lated air position will excessivelydry the air. In this case, change theair position.

4. Adjust the fan speed control andtemperature control to maintainmaximum comfort.

• When maximum cooling is desired,set the temperature control to theextreme left position, set the modecontrol to the MAX A/C position,then set the fan speed control tothe highest speed.

Air conditioning system operation tips • If the vehicle has been parked in

direct sunlight during hot weather,open the windows for a short timeto let the hot air inside the vehicleescape.

• To help reduce moisture inside ofthe windows on rainy or humiddays, decrease the humidity insidethe vehicle by operating the airconditioning system.

• During air conditioning systemoperation, you may occasionallynotice a slight change in enginespeed as the air conditioning com-pressor cycles. This is a normalsystem operation characteristic.

• Use the air conditioning systemevery month only for a few minutesto ensure maximum system per-formance.

• When using the air conditioningsystem, you may notice clear waterdripping (or even puddling) on theground under the passenger sideof the vehicle. This is a normal sys-tem operation characteristic.

CAUTION - Excessive ACWhile using the air conditioningsystem, monitor the tempera-ture gauge closely while drivingup hills or in heavy traffic whenoutside temperatures are high.Air conditioning system opera-tion may cause engine over-heating and potential enginedamage. Continue to use theblower fan but turn the air con-ditioning system off if the tem-perature gauge indicates engineoverheating.

4 115


• Operating the air conditioning sys-tem in the recirculated air positionprovides maximum cooling, how-ever, continual operation in thismode may cause the air inside thevehicle to become stale.

• During cooling operation, you mayoccasionally notice a misty air flowbecause of rapid cooling andhumid air intake. This is a normalsystem operation characteristic.

Climate control air filter

The climate control air filter installedbehind the glove box filters the dust orother pollutants that come into thevehicle from the outside through theheating and air conditioning system. Ifdust or other pollutants accumulate inthe filter over a period of time, the airflow from the air vents may decrease,resulting in moisture accumulation onthe inside of the windshield evenwhen the outside (fresh) air position isselected. If this happens, have the cli-mate control air filter replaced by anauthorized Kia dealer.

✽✽ NOTICE• Replace the filter according to the

Maintenance Schedule.If the vehicle is being driven insevere conditions such as dusty,rough roads, more frequent cli-mate control air filter inspectionsand changes are required.

• When the air flow rate suddenlydecreases, the system should bechecked at an authorized Kiadealer.

OMG075033

Outside air

Recirculatedair

Climate controlair filter

Blower

Evaporatorcore

Heater core


1164

Checking the amount of airconditioner refrigerant andcompressor lubricantWhen the amount of refrigerant islow, the performance of the air con-ditioning is reduced. Overfilling alsohas a negative influence on the airconditioning system.Therefore, if abnormal operation isfound, have the system inspected byan authorized Kia dealer.

The air conditioning system shouldbe serviced by an authorized Kiadealer.

CAUTION - Compressordamage

It is important that the correcttype and amount of oil andrefrigerant is used. Otherwise,damage to the compressor andabnormal system operation mayoccur.

WARNINGBecause the refriger-ant is at very highpressure, the air con-ditioning systemshould only be serv-

iced by trained and certifiedtechnicians. It is important thatthe correct type and amount ofoil and refrigerant is used, oth-erwise damage to the vehicleand personal injury may occur.

4 117


AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

1. Driver’s temperature control knob

2. AUTO (automatic control) button

3. OFF button

4. Front windshield defroster button

5. Mode selection button

6. Fan speed control switch

7. Air intake control button

8. Rear window defroster button

9. Passenger's temperature control knob

10. Dual temperature control selection button

11. Air conditioning button

12. Climate control display

OYDECL2011CN


1184

Automatic heating and air con-ditioning

1. Push the AUTO button.The modes,fan speeds, air intake and air-con-ditioning will be controlled automat-ically by temperature setting.

2. Turn the temperature control knobto set the desired temperature.

✽✽ NOTICE• To turn the automatic operation

off, select any button or switch ofthe following:- Mode selection button- Air conditioning button- Front windshield defroster button- Air intake control button- Fan speed control knobThe selected function will be con-trolled manually while other func-tions operate automatically.

• For your convenience and toimprove the effectiveness of theclimate control, use the AUTObutton and set the temperature to23°C (73°F).

OYDDCL2012

OYDDCL2017

■ Driver’s side ■ Passenger’s side

4 119


✽✽ NOTICENever place anything over the sen-sor located on the instrument panelto ensure better control of the heat-ing and cooling system.

Manual heating and air condi-tioningThe heating and cooling system canbe controlled manually by pushingbuttons other than the AUTO button.In this case, the system workssequentially according to the order ofbuttons selected.1. Start the engine.2. Set the mode to the desired position.

To improve the effectiveness ofheating and cooling :- Heating:- Cooling:

3. Set the temperature control to thedesired position.

4. Set the air intake control to theoutside (fresh) air or recirculatedair position.

5. Set the fan speed control to thedesired speed.

6. If air conditioning is desired, turnthe air conditioning system on.

Press the AUTO button in order toconvert to full automatic control ofthe system.

Mode selection

The mode selection button controlsthe direction of the air flow throughthe ventilation system.Every time you press the modeselection button, the mode willchange as follows:

Refer to the illustration in the"Manual climate control system".

OYDDCL2013

OYDDCL2014


1204

Face-Level (B, C, D, E, F)

Air flow is directed toward the upperbody and face. Additionally, eachoutlet can be controlled to direct theair discharged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is discharged towards theface and floor.

Floor-Level (C, A, D, E)

Most of the air flow is directed to thefloor, with a small amount of the airbeing directed to the windshield andside window defroster.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to thefloor and the windshield with a smallamount directed to the side windowdefrosters.

Defrost-levelMost of the air flow is directed to thewindshield with a small amount of airdirected to the side windowdefrosters.

OYDDCL2016

4 121


Instrument panel ventsThe outlet vents can be opened orclosed separately using the thumb-wheel.Also, you can adjust the direction ofair delivered from these vents usingthe vent control lever as shown.

Temperature control

The temperature control knob allowsyou to control the temperature of theair flowing from the ventilation sys-tem.To change the air temperature inthe passenger compartment, turnthe knob to the right for warm air orleft for cooler air.

Adjusting the driver and passengerside temperature individually 1. Press the DUAL button to operate

the driver and passenger sidetemperature individually. Pressingthe right temperature control but-ton will automatically switch to theDUAL mode as well.

2. Operate the left temperature con-trol to adjust the driver side tem-perature. Operate the right tem-perature control to adjust the pas-senger side temperature.


OYDDCL2017

■ Driver’s side ■ Passenger’s side


1224

When the driver side temperature isset to the highest (HIGH) or lowest(LOW) temperature setting, theDUAL mode is deactivated for maxi-mum heating or cooling.

Adjusting the driver and passengerside temperature equally1. Press the DUAL button again to

deactivate DUAL mode. The pas-senger side temperature will beset to the same temperature asthe driver side temperature.

2. Operate the driver side tempera-ture control switch. The driver andpassenger side temperature willbe adjusted equally.

Air intake control

The air intake control is used toselect outside (fresh) air position orrecirculated air position.To change the air intake control posi-tion, push the control button.

OYDDCL2019

4 123


Recirculated air positionWith the recirculated airposition selected, airfrom the passengercompartment will bedrawn through the heat-ing system and heatedor cooled according tothe function selected.

Outside (fresh) air positionWith the outside (fresh)air position selected, airenters the vehicle fromoutside and is heated orcooled according to thefunction selected.

Prolonged operation of the heater inthe recirculated air position (without airconditioning selected) may cause fog-ging of the windshield and side win-dows and the air within the passengercompartment may become stale.In addition, prolonged operation ofthe air conditioning with the recircu-lated air position selected will resultin excessively dry air in the passen-ger compartment.

WARNING• Continuous use of the climate

control system in the recircu-lated air position may allowhumidity to increase insidethe vehicle which may fog theglass and obscure visibility.

• Do not sleep in a vehicle withthe air conditioning or heatingsystem on. It may cause seri-ous harm or death due to adrop in the oxygen leveland/or body temperature.

• Continue using the climatecontrol system in the recircu-lated air position can causedrowsiness or sleepiness, andloss of vehicle control. Set theair intake control to the outside(fresh) air position as much aspossible while driving.


1244

Fan speed control

The fan speed can be set to thedesired speed by pressing the fanspeed control switch.To change the fan speed press the

part of the switch for higherspeed or press the part of theswitch for lower speed.To turn the fan speed control off,press the OFF button.

Air conditioning

Press the A/C button to turn the airconditioning system on (indicatorlight will illuminate).Press the button again to turn the airconditioning system off.

OFF mode

Press the OFF button to turn off theair climate control system. Howeveryou can still operate the mode andair intake buttons as long as the igni-tion switch is in the ON position.

OYDDCL2022OYDDCL2021OYDDCL2020

4 125


System operationVentilation1. Set the mode to the position.2. Set the air intake control to the



desired speed.

Heating1. Set the mode to the position.2. Set the air intake control to the



desired speed.5. If dehumidified heating is desired,

turn the air conditioning system (ifequipped) on.

• If the windshield fogs up, set themode to the or position.

Operation Tips• To keep dust or unpleasant fumes

from entering the vehicle throughthe ventilation system, temporarilyset the air intake control to therecirculated air position. Be sure toreturn the control to the fresh airposition when the irritation haspassed to keep fresh air in thevehicle. This will help keep the driv-er alert and comfortable.

• Air for the heating/cooling systemis drawn in through the grilles justahead of the windshield. Careshould be taken that these are notblocked by leaves, snow, ice orother obstructions.

• To prevent interior fog on the wind-shield, set the air intake control tothe fresh air position and fan speedto the desired position, turn on theair conditioning system, and adjustthe temperature control to desiredtemperature.

Air conditioningKia Air Conditioning Systems arefilled with R-134a refrigerant.1. Start the engine. Press the air con-

ditioning button.2. Set the mode to the position.3. Set the air intake control to the out-

side air or recirculated air position.4. Adjust the fan speed control and

temperature control to maintainmaximum comfort.

• When maximum cooling is desired,set the temperature control to theextreme left position, then set thefan speed control to the highestspeed.


1264

✽✽ NOTICE• When using the air conditioning

system, monitor the temperaturegauge closely while driving uphills or in heavy traffic when out-side temperatures are high. Airconditioning system operationmay cause engine overheating.Continue to use the blower fan butturn the air conditioning systemoff if the temperature gauge indi-cates engine overheating.

• When opening the windows inhumid weather air conditioningmay create water droplets insidethe vehicle. Since excessive waterdroplets may cause damage toelectrical equipment, air condi-tioning should only be used withthe windows closed.

Air conditioning system operation tips • If the vehicle has been parked in

direct sunlight during hot weather,open the windows for a short timeto let the hot air inside the vehicleescape.

• To help reduce moisture inside ofthe windows on rainy or humiddays, decrease the humidity insidethe vehicle by operating the airconditioning system.

• During air conditioning systemoperation, you may occasionallynotice a slight change in enginespeed as the air conditioning com-pressor cycles. This is a normalsystem operation characteristic.

• Use the air conditioning systemevery month only for a few minutesto ensure maximum system per-formance.

• When using the air conditioningsystem, you may notice clear waterdripping (or even puddling) on theground under the passenger sideof the vehicle. This is a normal sys-tem operation characteristic.

• Operating the air conditioning sys-tem in the recirculated air positionprovides maximum cooling, how-ever, continual operation in thismode may cause the air inside thevehicle to become stale.

• During cooling operation, you mayoccasionally notice a misty air flowbecause of rapid cooling andhumid air intake. This is a normalsystem operation characteristic.

• If you operate air conditionerexcessively, the difference betweenthe temperature of the outside airand that of the windshield couldcause the outer surface of thewindshield to fog up, causing lossof visibility. In this case, set themode selection knob or button tothe position and fan speedcontrol to the lower speed.

4 127


WINDSHIELD DEFROSTING AND DEFOGGING• For maximum defrosting, set the

temperature control to the extremeright/hot position and the fan speedcontrol to the highest speed.

• If warm air to the floor is desiredwhile defrosting or defogging, set themode to the floor-defrost position.

• Before driving, clear all snow andice from the windshield, rear win-dow, outside rear view mirrors, andall side windows.

• Clear all snow and ice from thehood and air inlet in the cowl grill toimprove heater and defroster effi-ciency and to reduce the probabili-ty of fogging up the inside of thewindshield.

Manual climate control systemTo defog inside windshield

1. Select any fan speed except "0"position.

2. Select desired temperature.3. Select the or position.4. The outside (fresh) air will be

selected automatically.If the outside (fresh) air position isnot selected automatically, press thecorresponding button manually.

WARNING - Windshieldheating

Do not use the or posi-tion during cooling operation inextremely humid weather toreduce the likelyhood of fog up.

OYDDCL2023


1284

To defrost outside windshield

1. Set the fan speed to the highest(extreme right) position.

2. Set the temperature to the extremehot position.

3. Select the position.4. The outside (fresh) air will be

selected automatically.

Automatic climate control systemTo defog inside windshield

1. Select desired fan speed.2. Select desired temperature.3. Press the defroster button ( ).4. The outside (fresh) air position will

be selected automatically.If the outside (fresh) air position isnot selected automatically, adjust thecorresponding button manually.If the position is selected, lowerfan speed is adjusted to a higher fanspeed.

To defrost outside windshield

1. Set the fan speed to the highestposition.

2. Set the temperature to theextreme hot (HI) position.

3. Press the defroster button ( ).4. The outside (fresh) air position will

be selected automatically.If the position is selected, lowerfan speed is adjusted to a higher fanspeed.

OYDDCL2024

OYDDCL2025

OYDDCL2025

4 129


Defogging LogicTo reduce the probability of foggingup inside of the windshield, the airintake or air conditioning are con-trolled automatically according tocertain conditions such as or position. Logic can be disabled andenabled by doing following :

Manual climate control system


2. Turn the mode selection knob tothe defrost position ( ).

3. Push the air intake control buttonat least 5 times within 3 seconds.

The indicator light in the air intakecontrol button will blink 3 times with0.5 second of interval. It indicates thatthe defogging logic is canceled orreturned to the programmed status.

If the battery has been discharged ordisconnected, it resets to the defoglogic status.

Automatic climate control system


2. Select the defroster position beforepressing the defroster button ( ).

3. While pressing the air conditioningbutton (A/C), press the air intakecontrol button ( ) at least 5times within 3 seconds.

The indicator on the air intake buttonblinks 3 times with 0.5 seconds ofinterval. It indicates that the defog-ging logic is canceled or returned tothe programmed status.



1304

If the battery has been discharged ordisconnected, it resets to the defoglogic status.

Auto defogging system (Only forautomatic climate control system,if equipped)

Auto defogging reduces the probabil-ity of fogging up the inside of thewindshield by automatically sensingthe moisture inside the windshield.The auto defogging system operateswhen the heater or air conditioning ison.

This indicator illuminateswhen the auto defoggingsystem senses the mois-ture inside the windshieldand operates.

If more moisture is in the vehicle,higher steps operate as follows. Forexample, if auto defogging does notdefog inside the windshield at step 1Outside air position, it tries to defogagain at step 2 Blowing air towardthe windshield.

Step 1 : Outside air positionStep 2 : Blowing air toward the wind-

shieldStep 3 : Increasing air flow toward

the windshieldStep 4 : Operating the air conditioningStep 5 : Maximizing the air condi-

tioning

OYDDCL2029

4 131


If your vehicle is equipped with theauto defogging system, it is automat-ically activated when the conditionsare met. However, if you would like tocancel the auto defogging system,press the front defroster button 4times within 2 seconds while press-ing the AUTO button. The indicatorwill blink 3 times to notify you that thesystem is cancelled. To use the autodefogging system again, follow theprocedures mentioned above.If the battery has been disconnectedor discharged, it resets to the autodefogging status.

✽✽ NOTICE• When the air conditioning is

turned on by Auto defogging sys-tem, if you try to turn off the airconditioning, the indicator willblink 3 times and the air condi-tioning will not be turned off.

• For efficiency, do not select recir-culated air position while Autodefogging system is operating.

CAUTIONDo not remove the sensor coverlocated on the upper end of thedriver side windshield glass.Damage to the system partscould occur and may not be cov-ered by your vehicle warranty.


1324

These compartments can be used tostore small items.To avoid possible theft, do not leavevaluables in the storage compartment.Always keep the storage compart-ment covers closed while driving.

Center console storage (if equipped)

To open the center console storage,pull up the lever.

Glove box

To open the glove box, push the but-ton (1) and the glove box will auto-matically open. Close the glove boxafter use.

STORAGE COMPARTMENT

WARNING - Flammablematerials

Do not store flammable/explo-sive materials in the vehicle.These items may catch fireand/or explode if the vehicle isexposed to hot temperatures forextended periods.

OYDDCO2049

OYDDCO2048

4 133


Cool box (if equipped)

You can keep beverage cans or otheritems cool in the glove box.1. Turn on the air conditioning.2. Slide the open/close lever of the

vent installed in the glove box tothe open position.

3. When the cool box is not used, slidethe lever to the closed position.

If some items in the cool box blockthe vent, the cooling effectiveness ofthe coolbox is reduced.

✽✽ NOTICEDo not put perishable food in thecool box because it may not main-tain the necessary consistent tem-perature to keep the food fresh.

✽✽ NOTICEIf the temperature control knob is inthe warm or hot position, warm orhot air will flow into the glove box.

Sunglass holder

To open the sunglass holder, pressthe cover and the holder will slowlyopen. Place your sunglasses with thelenses facing out.To close the sunglass holder, push itup.Do not place other items in the sun-glass holder.

OYDDCO2050 OYDDCO2052


1344

WARNING - Avoid distracteddriving

• Do not keep objects exceptsunglasses inside the sun-glass holder. Such objects canbe thrown from the holder inthe event of a sudden stop oran accident, possibly injuringthe passengers in the vehicle.

• Do not open the sunglassholder while the vehicle ismoving. The rear view mirrorof the vehicle can be blockedby an open sunglass holder.

• Do not put the glasses forciblyinto a sunglass holder to pre-vent breakage or deformationof glasses. It may cause per-sonal injury if you try to openit forcibly when the glassesare jammed in holder.

4 135


Cigarette lighter (if equipped)

For the cigarette lighter to work, theignition switch must be in the ACC orON position.To use the cigarette lighter, push it allthe way into its socket. When the ele-ment is heated, the lighter will popout to the "ready" position.If it is necessary to replace the ciga-rette lighter, use only a genuine Kiareplacement or its approved equiva-lent.

• Do not hold the lighter in after it isalready heated because it willoverheat.

• If the lighter does not pop out with-in 30 seconds, remove it to preventoverheating.

Ashtray (if equipped)

To use the ashtray, open the cover.To clean or empty the ashtray, pull itout.

INTERIOR FEATURES

OYDDCO2054OYDDCO2053

CAUTION - Cigarettelighter

Do not insert accessories intothe cigarette lighter socket.Doing so can damage toe lightersocket

WARNING - Ashtray usePutting lit cigarettes or matchesin an ashtray with other com-bustible materials may cause afire.


1364

Cup holder

Cups or small beverage cans may beplaced in the cup holders.

Sliding armrest (if equipped)

To move forwardGrab the front portion of the armrest(1) then pull it forward

To move rearwardPush the armrest rearward with yourpalm.

WARNING - Hot liquids• Do not place uncovered cups

of hot liquid in the cup holderwhile the vehicle is in motion.If the hot liquid spills, you mayburn yourself. Such a burn tothe driver could lead to loss ofcontrol of the vehicle.

• To reduce the risk of personalinjury in the event of a suddenstop or collision, do not placeuncovered or unsecured bot-tles, glasses, cans, etc., in thecup holder while the vehicle isin motion.

WARNINGKeep cans or bottles out ofdirect sun light and do not putthem in a vehicle that is heatedup. It may explode.

OYDECO2226CN

OYDDCO2055

OYDDCO2056

■ Front

■ Rear (if equipped)

4 137


Sunvisor

Use the sunvisor to shield direct lightthrough the front or side windows.To use the sunvisor, pull it downward.To use the sunvisor for the side win-dow, pull it downward, unsnap it fromthe bracket (1) and swing it to theside (2).Adjust the sunvisor extension for-ward or backward (3).To use the vanity mirror, pull down thevisor and slide the mirror cover (4).The ticket holder (5) is provided forholding a tollgate ticket (if equipped).

Seat warmer (if equipped)CAUTION - Vanity mirror

lampClose the vanity mirror coversecurely and return the sunvi-sor to its original position afteruse. If the vanity mirror is notclosed securely, the lamp willstay on and could result in bat-tery discharge and possiblesunvisor damage.

OVG049174

OYDDCO2057

OYDDCO2058

■ Front• Type A

■ Front• Type B

OYDDCO2059

■ Rear


1384

The seat warmer is provided to warmthe front seats during cold weather.With the ignition switch in the ONposition, push either of the switchesto warm the driver's seat or the frontpassenger's seat.During mild weather or under condi-tions where the operation of the seatwarmer is not needed, keep theswitches in the OFF position.• Each time you push the button, the

temperature setting of the seat ischanged as follows :- Front seat

- Rear seat

• The seat warmer defaults to theOFF position whenever the ignitionswitch is turned on.

• With the seat warmer switch in theON position, the heating system inthe seat turns off or on automaticallydepending on the seat temperature.

OFF→HIGH( )→MIDDLE( )→LOW( )

→

OFF → HIGH ( ) → LOW ( )

→

CAUTION• When cleaning the seats, do

not use an organic solventsuch as thinner, benzene,alcohol and gasoline. Doingso may damage the surface ofthe heater or seats.

• To prevent overheating theseat warmer, do not place any-thing on the seats that insu-lates against heat, such asblankets, cushions or seatcovers while the seat warmeris in operation.

• Do not place heavy or sharpobjects on seats equippedwith seat warmers. Damage tothe seat warming componentscould occur.

WARNING - Seat warmerburns

Passengers should use extremecaution when using seat warm-ers due to the possibility ofexcess heating or burns. Theseat warmer may cause burnseven at low temperatures, espe-cially if used for long periods oftime. The occupants must beable to feel if the seat is becom-ing too warm and to turn theseat warmer off.In particular, the driver mustexercise extreme care for thefollowing types of passengers:1. Infants, children, elderly or

disabled persons, or hospitaloutpatients

2. Persons with sensitive skinor those that burn easily

3. Fatigued individuals4. Intoxicated individuals5. Individuals taking medication

that can cause drowsiness orsleepiness (sleeping pills,cold tablets, etc.)

4 139


Climate control seat (if equipped)

The climate control seat is providedto cool or warm the seat during hot orcold weather by blowing air throughsmall vent holes on the surface of theseat and seatback. While the engineis running, push the rear portion ofthe switch (blue color) to cool theseat, and push the front portion of theswitch (red color) to warm the seat.When the operation of the climatecontrol seat is not needed, keep theswitch in the OFF position.

The climate control seat defaults tothe OFF position whenever the igni-tion switch is turned on.• Each time you push the button, the

airflow is changed as follows:

OYDDCO2060

OFF→HIGH( )→MIDDLE( )→LOW( )

→

CAUTION• The climate control seat is a

supplementary cooling/heat-ing system. Use the climatecontrol seat when the climatecontrol system is on. Using theclimate control seat for pro-longed periods of time with theclimate control system offcould cause the climate con-trol seat performance to impair.

(Continued)

(Continued)• When cleaning the seats, do

not use an organic solventsuch as paint thinner, ben-zene, alcohol and gasoline.Doing so may damage the sur-face of the seats.

• Do not spill liquid such aswater or beverages on the sur-face of the front seats andseatbacks, or the air ventholes may be blocked and pre-vented from working properly.

• Do not place materials suchas plastic bags or newspapersunder the seats. The air ventmay not work properly as theair intake can be blocked.

• When the air vent does notoperate, restart the vehicle. Ifthere is no change, have yourvehicle inspected by anauthorized Kia dealer.


1404

Power outlet (if equipped)

The power outlet is designed to pro-vide power for mobile telephones orother devices designed to operatewith vehicle electrical systems. Thedevices should draw less than 12V,10A with the engine running.

Use the power outlet only when theengine is running and remove theaccessory plug after use. Using theaccessory plug for prolonged periodsof time with the engine off couldcause the battery to discharge.Only use 12V electric accessorieswhich are less than 10A in electriccapacity.Adjust the air-conditioner or heater tothe lowest operating level whenusing the power outlet.

Close the cover when not in use.Some electronic devices can causeelectronic interference when pluggedinto a vehicle’s power outlet. Thesedevices may cause excessive audiostatic and malfunctions in other elec-tronic systems or devices used inyour vehicle.

OYDECO2061CN

OYDECO2061CN-1

■ Type A

■ Type B

WARNING - Electric shockDo not put a finger or a foreignelement (pin, etc.) into a poweroutlet and do not touch with awet hand.You may get an electricshock.

4 141


LCD monitor (clock and outside temperature)

Whenever the battery terminals orrelated fuses are disconnected, youmust reset the time.When the ignition switch is in theACC or ON position, the clock but-tons operate as follows:

• HOUR (1) :Pressing the 'H" button will advancethe time display by one hour.

• MINUTE (2) :Pressing the "M" button will advancethe time display by one minute.

• Display conversion:- ClockTo change the 12 hour format tothe 24 hour format, press the "H"and "M" button at the same time formore than 4 seconds.For example, if the time is 10:15p.m., the display will change to22:15.- Outside thermometerTo change the temperature unit Fto C (or C to F) press the "H" and"M" button at the same time for 1 to3 seconds.

WARNINGDo not adjust the clock whiledriving.You may lose your steer-ing control.

OYDECO2062


1424

Clothes hanger (if equipped)

To use the hanger, pull down theupper portion of the hanger.

Floor mat anchor(s)

When using a floor mat on the floorcarpet, make sure it attaches to thefloor mat anchor(s) in the front andrear floor carpet of your vehicle. Thiskeeps the floor mat from sliding for-ward.

The following must be observedwhen installing ANY floor mat in thevehicle.• Ensure that the floor mats are

securely attached to the vehicle'sfloor mat anchor(s) before drivingthe vehicle.

• Do not use ANY floor mat that can-not be firmly attached to the vehi-cle's floor mat anchors.

• Do not stack floor mats on top ofone another (e.g. ,all-weather rub-ber mat on top of a carpeted floormat). Only a single floor mat shouldbe installed in each position.

IMPORTANT - Your vehicle wasmanufactured with driver's side floormat anchors that are designed tosecurely hold the floor mat in place.To avoid any interference with pedaloperation, Kia recommends that onlythe Kia floor mat designed for use inyour vehicle be installed.

OUN026348

CAUTION - Hanging clothing

Do not hang heavy clothes,since those may damage thehook.

ODMECO2034

WARNING - After marketfloor mat

Do not install aftermarket floormats that are not capable ofbeing securely attached to thevehicle's floor mat anchors.Unsecured floor mats can inter-fere with pedal operation.

4 143


Navigation system (if equipped)The navigation system identifies thepresent position of our vehicle byusing GPS information and can helpguide you to a selected destination.Detailed information for the naviga-tion system is described in a sepa-rately supplied manual.


1444

✽✽ NOTICE If you install an after market HIDhead lamp, your vehicle’s audio andelectronic device may malfunction.

Glass antenna (if equipped)

When the radio power switch isturned on while the ignition switch isin either the “ON” or “ACC” position,your car will receive both AM and FMbroadcast signals through the anten-na in the rear window glass.

AUDIO SYSTEM

CAUTION• Do not clean the inside of the

rear window glass with acleaner or use a scraper toremove foreign deposits asthis may cause damage to theantenna elements.

• Avoid adding metallic coat-ings such as Ni, Cd, and soon. These can disturb receiv-ing AM and FM broadcast sig-nals.

OYDEMM2001

4 145


Steering wheel audio controls (if equipped)

The steering wheel may incorporateaudio control buttons.

VOLUME ( / ) (1)• Press the lever upward ( ) to

increase the volume.• Press the lever downward ( ) to

decrease the volume.

SEEK/PRESET ( / ) (2)The SEEK/PRESET button has dif-ferent functions based on the systemmode. For the following functions thebutton should be pressed for 0.8 sec-onds or more.

RADIO modeIt will function as the AUTO SEEKselect button.

CD/USB/iPod modeIt will function as the FF/REW button.

If the SEEK/PRESET button ispressed for less than 0.8 seconds, itwill work as follows in each mode.

RADIO modeIt will function as the PRESET STA-TION buttons.

CD/USB/iPod modeIt will function as TRACK UP/DOWNbutton.

CAUTIONDo not operate audio remotecontrol buttons simultaneously.

OYDDMM2002

OYDDMM2003

■ Type A

■ Type B

WARNINGDriving while distracted is dan-gerous and should be avoided.Drivers should remain attentiveto driving and always exercisecaution when using the steering-wheel-mounted controls whiledriving.


1464

MODE (3)Press the button to change audiosource.FM(1~2)➟AM➟SAT(1~3)➟CD➟USBAUX(iPod)➟FM...In addition to mode change, Poweron/off can be made by pressing thisbutton when the ignition switch is onACC or ON.- Power ON: Press the button when

the audio is off- Power OFF: Press the button for

more than 0.8 seconds when theaudio is on.

MUTE (4, if equipped)• Press the button to mute the

sound.• Press the button to turn off the

microphone during a telephonecall.

Detailed information for audio controlbuttons are described in the followingpages in this chapter.

Aux, USB and iPod®* port

If your vehicle has an aux and/orUSB(universal serial bus) port oriPod® port, you can use an aux portto connect audio devices and anUSB port to plug in an USB and alsoan iPod® port to plug in an iPod®.

✽✽ NOTICEWhen using a portable audio deviceconnected to the power outlet, noisemay occur during playback. If thishappens, use the power source of theportable audio device.* iPod® is a Registered trademark of Apple Inc.

OYDDMM2004

4 147


How vehicle audio works

AM and FM radio signals are broad-cast from transmitter towers locatedaround your city. They are intercept-ed by the radio antenna on your vehi-cle. This signal is then processed bythe radio and sent to your vehiclespeakers.When a strong radio signal hasreached your vehicle, the preciseengineering of your audio systemensures the best possible qualityreproduction. However, in somecases the signal coming to your vehi-cle may not be strong and clear.

This can be due to factors, such asthe distance from the radio station,closeness of other strong radio sta-tions or the presence of buildings,bridges or other large obstructions inthe area.

AM broadcasts can be received atgreater distances than FM broad-casts. This is because AM radiowaves are transmitted at low fre-quencies. These long distance,lowfrequency radio waves can follow thecurvature of the earth rather thantravelling straight. In addition, theycurve around obstructions resultingin better signal coverage.

¢ ¢ ¢ ¢ ¢ ¢

JBM002

AM reception

¢ ¢ ¢

JBM001

FM reception


1484

FM broadcasts are transmitted athigh frequencies and do not bend tofollow the earth's surface. Becauseof this, FM broadcasts generallybegin to fade within short distancesfrom the station. short distances fromthe station. Also, FM signals are eas-ily affected by buildings, mountains,and obstructions. This can lead toundesirable or unpleasant listeningconditions which might lead you tobelieve a problem exists with yourradio. The following conditions arenormal and do not indicate radiotrouble:

• Fading - As your vehicle movesaway from the radio station, thesignal will weaken and sound willbegin to fade. When this occurs,we suggest that you select anotherstronger station.

• Flutter/Static - Weak FM signals orlarge obstructions between thetransmitter and your radio can dis-turb the signal causing static orfluttering noises to occur. Reducingthe treble level may lessen thiseffect until the disturbance clears.

• Station Swapping - As an FM sig-nal weakens, another more power-ful signal near the same frequencymay begin to play. This is becauseyour radio is designed to lock ontothe clearest signal. If this occurs,select another station with astronger signal.

• Multi-Path Cancellation - Radiosignals being received from sever-al directions can cause distortionor fluttering. This can be caused bya direct and reflected signal fromthe same station, or by signalsfrom two stations with close fre-quencies. If this occurs, selectanother station until the conditionhas passed.

JBM003

FM radio station

JBM005

¢ ¢ ¢

JBM004

4 149


Using a cellular phone or a two-way radio When a cellular phone is used insidethe vehicle, noise may be producedfrom the audio system. This does notmean that something is wrong withthe audio equipment. In such a case,try to operate mobile devices as farfrom the audio equipment as possible.

Caring for disc• If the temperature inside the car is

too high, open the car windows toventilate before using the system.

• It is illegal to copy and useMP3/WMA files without permis-sion. Use CDs that are createdonly by lawful means.

• Do not apply volatile agents, suchas benzene and thinner, normalcleaners and magnetic spraysmade for analogue disc onto CDs.

• To prevent the disc surface fromgetting damaged, hold CDs by theedges or the center hole only.

• Clean the disc surface with a pieceof soft cloth before playback (wipeit from the center to the outsideedge).

• Do not damage the disc surface orattach pieces of sticky tape orpaper.

• Make certain only CDs are insert-ed into the CD player (Do not insertmore than one CD at a time).

• Keep CDs in their cases after useto protect them from scratches ordirt.

CAUTIONWhen using a communicationsystem such as a cellular phoneor a radio set inside the vehicle,a separate external antennamust be fitted. When a cellularphone or a radio set is usedwith an internal antenna alone,it may interfere with the vehi-cle's electrical system andadversely affect safe operationof the vehicle.

WARNINGDo not use a cellular phonewhile driving. Stop at a safelocation to use a cellular phone.


1504

• Depending on the type of CD-R/CD-RW CDs, certain CDs maynot operate normally according tothe manufacturing companies. Insuch circumstances, continueduse may cause malfunctions toyour audio system.

✽✽ NOTICE - Playing an Incompatible

Copy Protected AudioCD

Some copy protected CDs, which donot comply with international audioCD standards (Red Book), may notplay on your car audio. Please notethat inabilities to properly play acopy protected CD may indicatethat the CD is defective, not the CDplayer.

NOTE:Order of playing files (folders) :1. Song playing order : to

sequentially.2. Folder playing order :❋ If no song file is contained in the

folder, that folder is not displayed.

4 151


CAUTION• Operating the device while

driving could lead to acci-dents due to a lack of atten-tion to external surroundings.First park the vehicle beforeoperating the device.

• Adjust the volume to levelsthat allow the driver to hearsounds from outside of thevehicle. Driving in a statewhere external sounds cannotbe heard may lead to acci-dents.

• Pay attention to the volumesetting when turning thedevice on. A sudden output ofextreme volume upon turningthe device on could lead tohearing impairment. (Adjustthe volume to a suitable levelsbefore turning off the device.)

(Continued)

WARNING• Do not stare at the screen

while driving. Staring at thescreen for prolonged periodsof time could lead to trafficaccidents.

• Do not disassemble, assemble,or modify the audio system.Such acts could result in acci-dents, fire, or electric shock.

• Using the phone while drivingmay lead to a lack of attentionof traffic conditions andincrease the likelihood ofaccidents. Use the phone fea-ture after parking the vehicle.

• Heed caution not to spill wateror introduce foreign objectsinto the device. Such actscould lead to smoke, fire, orproduct malfunction.

(Continued)

(Continued)• Please refrain from use if the

screen is blank or no soundcan be heard as these signsmay indicate product malfunc-tion. Continued use in suchconditions could lead to acci-dents(fires, electric shock) orproduct malfunctions.

• Do not touch the antenna dur-ing thunder or lightening assuch acts may lead to light-ning induced electric shock.

• Do not stop or park in park-ing-restricted areas to operatethe product. Such acts couldlead to traffic accidents.

• Use the system with the vehi-cle ignition turned on.Prolonged use with the igni-tion turned off could result inbattery discharge.


1524

(Continued)• If you want to change the posi-

tion of device installation,please inquire with your placeof purchase or service mainte-nance center.Technical expert-ise is required to install or dis-assemble the device.

• Turn on the car ignition beforeusing this device. Do not oper-ate the audio system for longperiods of time with the igni-tion turned off as such opera-tions may lead to battery dis-charge.

• Do not subject the device tosevere shock or impact. Directpressure onto the front side ofthe monitor may cause dam-age to the LCD or touchscreen.

(Continued)

(Continued)• When cleaning the device,

make sure to turn off thedevice and use a dry andsmooth cloth. Never usetough materials, chemicalcloths, or solvents (alcohol,benzene, thinners, etc.) assuch materials may damagethe device panel or causecolor/quality deterioration

• Do not place beverages closeto the audio system. Spillingbeverages may lead to systemmalfunction.

• In case of product malfunction,please contact your place of pur-chase or After Service center.

• Placing the audio systemwithin an electromagneticenvironment may result innoise interference.

CAUTIONPrevent caustic solutions suchas perfume and cosmetic oilfrom contacting the dashboardbecause they may cause dam-age or discoloration.

4 153


USING THE USB DEVICE• To use an external USB device,

make sure the device is not con-nected when starting up thevehicle. Connect the device afterstarting up.

• If you start the engine when theUSB device is connected, it maydamage the USB device. (USBflashdrives are very sensitive toelectric shock.)

• If the engine is started up orturned off while the external USBdevice is connected, the externalUSB device may not work.

• The System may not play unau-thenticated MP3 or WMA files.1) It can only play MP3 files with

the compression rate between8Kbps ~ 320Kbps.

2) It can only play WMA musicfiles with the compression ratebetween 8Kbps ~ 320Kbps.

• Take precautions for static elec-tricity when connecting or discon-necting the external USB device.

(Continued)

(Continued)• An encrypted MP3 PLAYER is

not recognizable.• Depending on the condition of

the external USB device, theconnected external USB devicecan be unrecognizable.

• When the formatted byte/sectorsetting of External USB device isnot either 512BYTE or2048BYTE, then the device willnot be recognized.

• Use only a USB device format-ted to FAT 12/16/32.

• USB devices without USB I/Fauthentication may not be recog-nizable.

• Make sure the USB connectionterminal does not come in con-tact with the human body orother objects.

• If you repeatedly connect or dis-connect the USB device in ashort period of time, it may breakthe device.

(Continued)

(Continued)• You may hear a strange noise

when connecting or disconnect-ing a USB device.

• If you disconnect the externalUSB device during playback inUSB mode, the external USBdevice can be damaged or maymalfunction. Therefore, discon-nect the external USB devicewhen the audio is turned off or inanother mode. (e.g, Radio, CD)

• Depending on the type andcapacity of the external USBdevice or the type of the filesstored in the device, there is adifference in the time taken forrecognition of the device.

• Do not use the USB device forpurposes other than playingmusic files.

• Playing videos through the USBis not supported.

• Use of USB accessories such asrechargers or heaters using USBI/F may lower performance orcause trouble.

(Continued)


1544

(Continued)• Some USB flash memory read-

ers (such as CF, SD, micro SD,etc.) or external-HDD typedevices can be unrecognizable.

• Music files protected by DRM(DIGITAL RIGHTS MANAGE-MENT) are not recognizable.

• The data in the USB memorymay be lost while using thisaudio. Always back up importantdata on a personal storagedevice.

• Please avoid usingUSB memory prod-ucts which can beused as key chains orcellular phone acces-sories as they could cause dam-age to the USB jack. Pleasemake certain only to use plugtype connector products.

(Continued)• If you use devices such as a USB

hub purchased separately, thevehicle’s audio system may notrecognize the USB device. In thatcase, connect the USB devicedirectly to the multimedia terminalof the vehicle.

• If the USB device is divided by log-ical drives, only the music files onthe highest-priority drive are rec-ognized by car audio.

• Devices such as MP3 Player/Cellular phone/Digital camera canbe unrecognizable by standardUSB I/F can be unrecognizable.

• Charging through the USB maynot be supported in some mobiledevices.

• USB HDD or USB types liable toconnection failures due to vehiclevibrations are not supported.(i-stick type)

• Some non-standard USB devices(METAL COVER TYPE USB) canbe unrecognizable.

(Continued)

4 155


USING THE iPod® DEVICE• Some iPod® models may not

support communication protocoland files may not properly play.Supported iPod® models:- iPhone® 3GS/4- iPod® touch 1st~4th generation- iPod® nano 1st~6th generation- iPod® classic

• The order of search or playbackof songs in the iPod® can be dif-ferent from the order searched inthe audio system.

• If the iPod® is disabled due to itsown malfunction, reset theiPod®. (Reset: Refer to iPod®

manual)• An iPod® may not operate nor-

mally on low battery.(Continued)

(Continued)• Some iPod® devices, such as the

iPhone, can be connectedthrough the Bluetooth® WirelessTechnology interface. The devicemust have audio Bluetooth®

Wireless Technology capability(such as for stereo headphoneBluetooth® Wireless Technology).The device can play, but it will notbe controlled by the audio system.

• To use iPod® features within theaudio, use the cable providedupon purchasing an iPod®

device.• Skipping or improper operation

may occur depending on the char-acteristics of your iPod®/Phonedevice.

• If your iPhone is connected toboth the Bluetooth® WirelessTechnology and USB, the soundmay not be properly played. Inyour iPhone, select the Dock con-nector or Bluetooth® WirelessTechnology to change the soundoutput (source).

(Continued)

(Continued)• When connecting iPod® with the

iPod® Power Cable, insert theconnector to the multimediasocket completely. If not insertedcompletely, communicationsbetween iPod® and audio maybe interrupted.

• When adjusting the soundeffects of the iPod® and theaudio system, the sound effectsof both devices will overlap andmight reduce or distort the qual-ity of the sound.

• Deactivate (turn off) the equaliz-er function of an iPod® whenadjusting the audio system’s vol-ume, and turn off the equalizerof the audio system when usingthe equalizer of an iPod®.

• When not using iPod® with caraudio, detach the iPod® cablefrom iPod®. Otherwise, iPod®

may remain in accessory mode,and may not work properly.


1564

Bluetooth® WirelessTechnology

Bluetooth® Wireless TechnologyThe Bluetooth® word mark and logosare registered trademarks owned byBluetooth SIG, lnc. and any use ofsuch marks by Kia is under license.A Bluetooth® enabled call phone isrequired to use Bluetooth® wirelesstechnology.

Before Using the Bluetooth®

Handsfree

What is Bluetooth® ?• Bluetooth® refers to a short-dis-

tance wireless networking technol-ogy which uses a 2.45GHz fre-quency to connect various deviceswithin a certain distance.

• Supported within PCs, externaldevices, Bluetooth® phones, PDAs,various electronic devices, andautomotive environments,Bluetooth® allows data to be trans-mitted at high speeds without hav-ing to use a connector cable.

• Bluetooth® Handsfree refers to adevice which allows the user to con-veniently make phone calls withBluetooth® mobile phones throughthe AV/Navigation system.

• Bluetooth® Handsfree may not besupported in some mobile phones.To learn more about mobile devicecompatibility, visit www.kia.com.

Precautions for Safe Driving

• Bluetooth® Handsfree is a featurethat enables drivers to practice safedriving. Connecting the head unitwith a Bluetooth® phone allows theuser to conveniently make andreceive calls and use contacts.Before using Bluetooth®, carefullyread the contents of this user’smanual.

• Excessive use or operations whiledriving may lead to negligent driv-ing practices and result in acci-dents. Refrain from excessive oper-ations while driving.

• Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents. When driv-ing, view the screen only for shortperiods of time.

WARNING• Driving while distracted can

result in a loss of vehicle con-trol that may lead to an acci-dent, severe personal injury,and death.The driver’s primaryresponsibility is in the safeand legal operation of a vehi-cle, and use of any handhelddevices, other equipment, orvehicle systems which takethe driver’s eyes, attention andfocus away from the safe oper-ation of a vehicle or which arenot permissible by law shouldnever be used during opera-tion of the vehicle.

4 157


When connecting a Bluetooth®

Phone

• Before connecting the head unitwith the mobile phone, check tosee that the mobile phone sup-ports Bluetooth® features.

• Even if the phone supportsBluetooth®, the phone will not befound during device searches ifthe phone has been set to hiddenstate or the Bluetooth® power isturned off. Disable the hiddenstate or turn on the Bluetooth®

power prior to searching/connect-ing with the Head unit.

• Bluetooth phone is automaticallyconnected when the ignition on.

• If you do not want automatic con-nection with your Bluetooth®

device, turn off the Bluetooth®

feature within your mobile phone.• The Handsfree call volume and

quality may differ depending onthe mobile phone.

• Park the vehicle when connectingthe head unit with the mobilephone.

• Bluetooth® connection maybecome intermittently discon-nected in some mobile phones.Follow these steps to try again.1. Within the mobile phone, turn

the Bluetooth® function off/onand try again.

2. Turn the mobile phone powerOff/On and try again.

3. Completely remove the mobilephone battery, reboot, and thenagain.

4. Reboot the Audio VideoNavigation System and tryagain.

5. Delete all paired devices, pairand try again.

• Handsfree call quality and volumemay differ depending on themodel of your mobile phone.


1584

Voice Recognition

• When using the voice recognitionfeature, only commands listed with-in the user's manual are supported.

• Be aware that during the operationof the voice recognition system,pressing any key other than the

key terminate voice recognitionmode.

• For superior voice recognition per-formance, position the microphoneused for voice recognition abovethe head of the driver’s seat andmaintain a proper position whensaying commands.

• Within the following situations,voice recognition may not functionproperly due to external sound.- When the windows and sunroof

are open- When the wind of the cooling /

heating device is strong- When entering and passing

through tunnels(Continued)

(Continued)- When driving on rugged and

uneven roads- During severe rain (heavy rains,

windstorms)• Phone related voice commands

can be used only when aBluetooth® Wireless Technologydevice is connected.

• When making calls by stating aname, the corresponding contactmust be downloaded and storedwithin the audio system.

• After downloading the Bluetooth®

Wireless Technology phone book, ittakes some times to convert thephone book data into voice infor-mation. During this time, voicerecognition may not properly oper-ate.

• Pronounce the voice commandsnaturally and clearly as if in a nor-mal conversation.

4 159


■■ CD Player : AM171A7KN, AM1A1A7KN, AM171A7AN, AM1A1A7AN, AM101A7KN, AM111A7KN

❋ No logo will be shown if the Bluetooth® Wireless Technology feature is not supported.


1604

SYSTEM CONTROLLERSAND FUNCTIONS

❈ Display and settings may differdepending on the selected audio.

Audio Head Unit

(1) (EJECT)Ejects the disc.

(2) Changes to FM/AM/SIRIUS™ mode.Each time the key is pressed, themode is changed in order of FM1 ➟

FM2 ➟ AM ➟ SAT1 ➟ SAT2 ➟ SAT3.❈ In Setup>Display, the radio pop up

screen will be displayed when[Mode Pop up] is turned .When the pop up screen is dis-played, use the TUNE knob orkeys ~ to select thedesired mode.

(3) Changes to CD, USB(iPod®), AUX,My Music, BT Audio mode.Each time the key is pressed, themode is changed in order of CD,USB(iPod®), AUX, My Music, BTAudio.❈ In Setup>Display, the media pop

up screen will be displayed when[Mode Pop up] is turned .When the pop up screen is dis-played, use the TUNE knob orkeys ~ to select thedesired mode.

(4) Operates Phone Screen❈ When a phone is not connected,

the connection screen is displayed.

(5) Radio Mode : Automatically search-es for broadcast frequencies.CD, USB, iPod®, My Music modes- Shortly press the key (under 0.8 sec-

onds): Moves to next or previous song(file)

- Press and hold the key (over 0.8 sec-onds): Rewinds or fast-forwards thecurrent song.

BT Audio mode : Moves to next orprevious song(file)❈ The Play/Pause feature may oper-

ate differently depending on themobile phone.

(6) PWR/VOL knobPower : Turns power On/Off by

pressing the knobVolume : Sets volume by turning

the knob left/right

SEEKTRACK

PHONE

51

On

MEDIA

61

On

RADIO

4 161


(7) Each time the button is shortlypressed (under 0.8 seconds), it setsthe screen Off ➟ Screen On ➟

Screen Off❈ Audio operation is maintained and

only the screen will be turned Off.In the screen Off state, press anykey to turn the screen On again.

(8) Radio Mode- Shortly press the key : Previews

each broadcast for 5 secondseach.

- Press and hold the key (over 0.8seconds): Previews the broadcastssaved in Preset ~ for 5seconds each.

❈ Press the key again tocontinue listening to the currentfrequency.

❈ SAT Radio does not support thePreset scan feature.

CD, USB, My Music mode- Shortly press the key (under 0.8

seconds): Previews each song(file) for 10 seconds each.

❈ Press the key again tocontinue listening to the currentsong (file).

(9) Moves to the Display, Sound, Phone,System setting modes.

(10) Displays menus for the current mode.

(11) Radio Mode- SIRIUS™ RADIO : Category SearchMP3, CD, USB mode : Folder Search

(12) TUNE knobRadio mode : Changes frequency byturning the knob left/right.CD, USB, iPod®, My Music mode:Searches songs (files) by turning theknob left/right.❈ When the desired song is dis-

played, press the knob to play thesong.

Moves focus in all selection menusand selects menus.

CATFOLDER

MENU

SETUP

SCAN

SCAN

61

SCAN

DISP


1624

(13) ~ (Preset)Radio Mode: Saves frequencies(channels) or receives saved fre-quencies (channels)CD, USB, iPod®, My Music mode- : Repeat- : RandomIn the Radio, Media, Setup, andMenu pop up screen, the numbermenu is selected.

(14) Changes to FM/AM mode.Each time the key is pressed, themode is changed in order of FM1 ➟

FM2 ➟ AM.

(15) Changes to SIRIUS™ Satellite Radiomode.Each time the key is pressed, themode is changed in order of SAT1 ➟SAT2 ➟ SAT3.

SAT

FM/AM

2

1

61

4 163


SETUP

Display Settings

Press the key Select [Display]through TUNE knob or keySelect menu through TUNE knob

Mode Pop up[Mode Pop up] Changes /selection mode• During On state, press the

or key to display the modechange pop up screen.

Text Scroll[Text Scroll] Set /• : Maintains scroll• : Scrolls only one (1) time.

Media DisplayWhen playing an MP3 file, select thedesired display info from ‘Folder/File’or ‘Album/Artist/Song’.

Off

On

OffOn

MEDIARADIO

OffOn

1SETUP


1644

SOUND SETTINGS

Press the key Select [Sound]through TUNE knob or keySelect menu through TUNE knob

Sound SettingsThis menu allows you to set the‘Bass, Middle, Treble’ and the SoundFader and Balance.Select [Sound Settings] Selectmenu through TUNE knob Turn

TUNE knob left/right to set• Bass, Middle, Treble : Selects the

sound tone.• Fader, Balance : Moves the sound

fader and balance.• Default : Restores default settings.❈ Back : While adjusting values,

pressing the TUNE knob willrestore the parent menu.

Speed Dependent Volume ControlThis feature is used to automaticallycontrol the volume level according tothe speed of the vehicle.Select [Speed Dependent Vol.] Setin 4 levels [Off/Low/Mid/High] of

TUNE knob

Voice Recognition VolumeAdjusts voice recognition volume.Select [Voice Recognition Vol.] Setvolume of TUNE knob

2SETUP

4 165


SYSTEM SETTINGS

Press the key Select[System] through tune knob or key Select menu through TUNEknob

Memory InformationDisplays currently used memory andtotal system memory.Select [Memory Information] OKThe currently used memory is dis-played on the left side while the totalsystem memory is displayed on theright side.

Prompt FeedbackThis feature is used to change voicecommand feedback between Normaland Expert modes.Select [Prompt Feedback] Setthrough TUNE knob• On : This mode is for beginner

users and provides detailedinstructions during voice commandoperation.

• Off : This mode is for expert usersand omits some information duringvoice command operation. (Whenusing Expert mode, guidanceinstructions can be heard throughthe [Help] or [Menu] commands.

LanguageThis menu is used to set the displayand voice recognition language.Select [Language]Set through TUNE knob

❈ The system will reboot after thelanguage is changed.

❈ Language support by region- English, Francais, Espanol

4SETUP


1664

RADIO : FM, AM OR SIRIUS™

Changing RADIO mode (FM,AM or SIRIUS™)

Press the key to change themode in order of FM1➟FM2➟AM➟SAT1➟SAT2➟SAT3.

• When the power is off, press thekey to turn on the audio

system and receive radio broad-casts.

• [Mode Pop up] On state : Displays thechange radio mode pop up screen.While the pop up screen is displayed,you can change the radio mode(FM1➟FM2➟AM➟SAT1➟SAT2➟SAT3) through the tune knob or ~

keys.

Adjust VolumeTurn the VOL knob left/right toadjust the volume.

SEEKPress the key• Shortly pressing the key (under 0.8

seconds): Automatically searchesfor the next station.

• Pressing and holding the key (over0.8 seconds): While holding the key,frequency changes without stop-ping. When the key is released,automatically searches for the nextfrequency from that point.

Preset SEEKPress the ~ key• Shortly pressing the key (under 0.8

seconds): Plays the frequencysaved in the corresponding key.

• Pressing and holding the key (over0.8 seconds): Pressing and holdingthe desired key from ~ will save the currently playingbroadcast to the selected key andsound a BEEP.

SCANPress the key• Shortly pressing the key (under 0.8

seconds): The broadcast frequencyincreases and previews eachbroadcast for 5 seconds each. Afterscanning all frequencies, returnsand plays the current broadcast fre-quency.

• Pressing and holding the key (over0.8 seconds): Previews the broad-casts saved in Preset ~ for 5 seconds each.

Selecting through manualsearchTurn the TUNE knob left/right toadjust the frequency.• FM : Changes by 200KHz• AM : Changes by 10KHz

61

SCAN

61

61

SEEKTRACK

61

RADIO

RADIO

4 167


MENUWithin key are the A.Store(Auto Store) and Info functions.

A.StorePress the key Set [A.Store]through TUNE knob or key.Saves broadcasts with superiorreception to ~ keys. If nofrequencies are received, then themost recently received frequency willbe broadcast.

61

1MENU

MENU


1684

Satellite Radio channels:SIRIUS™ Satellite Radio has over130 channels, including 69 channelsof 100% commercial-free music, plussports, news, talk and entertainmentavailable nationwide in your vehicle.For more information and a completelist of SIRIUS™ Satellite Radio chan-nels, visit sirius.com in the UnitedStates, sirius-canada.ca in Canada,or call SIRIUS™ at 1-888-539-7474.

Satellite Radio reception factors:To receive the satellite signal, yourvehicle has been equipped with asatellite radio antenna located on theroof of your vehicle. The vehicle roofprovides the best location for an unob-structed, open view of the sky, arequirement of a satellite radio system.Like AM/FM, there are several factorsthat can affect satellite radio receptionperformance:• Antenna obstructions: For optimal

reception performance, keep theantenna clear of snow and ice build-up and keep luggage and othermaterial as far away from the anten-na as possible.

• Terrain: Hills, mountains, tall build-ings, bridges, tunnels, freeway over-

passes, parking garages, densetree foliage and thunderstorms caninterfere with your reception.

SIRIUS™ Satellite Radio service:SIRIUS™ Satellite Radio is a sub-scription-based satellite radio servicethat broadcasts music, sports, newsand entertainment programming toradio receivers, which are available forinstallation in motor vehicles or factoryinstalled, as well as for the home,portable and wireless devices, andthrough an Internet connection on per-sonal computer.Vehicles that are equipped with afactory installed SIRIUS™ SatelliteRadio system include:• Hardware and an introductory trial

subscription term, which begins onthe date of sale or lease of the vehi-cle.

• For a small upgrade fee, access toSIRIUS™music channels, and otherselect channels over the Internetusing any computer connected tothe Internet (U.S. customers only).For information on extended sub-scription terms, contact SIRIUS™at 1-888-539-7474.

NOTE:SiriusXM service requires a sub-scription, sold separately, after 3-month trial included with vehiclepurchase. If you decide to contin-ue your SiriusXM service at theend of your trial subscription, theplan you choose will automatical-ly renew and bill at then-currentrates until you call Sirius XM at 1-866-635-2349 to cancel. See ourCustomer Agreement for com-plete terms at www.siriusxm.com.Programming subject to change.Sirius satellite service is availableonly to those at least 18 and olderin the 48 contiguous USA, D.C.,and PR (with coverage limita-tions). Traffic information notavailable in all markets. See sir-iusxm.com/traffic for details.Sirius, XM and all related marksand logos are trademarks of SiriusXM Radio Inc.

SIRIUS™ Satellite Radio information

4 169


SIRIUS™ RADIO

Using SIRIUSTM Satellite RadioYour Kia vehicle is equipped with a 3month complimentary period of SIR-IUS™ Satellite Radio so you haveaccess to over 130 channels ofmusic, information, and entertain-ment programming.

ActivationIn order to extend or reactivate yoursubscription to SIRIUS™ SatelliteRadio, you will need to contact SIR-IUS™ Customer Care at 1-888-539-7474. Have your 12 digit SID (SiriusIdentification Number) / ESN(Electronic Serial Number) ready. Toretrieve the SID / ESN, turn on theradio, press the [RADIO] button, andtune to channel zero.

Please note that the vehicle will needto be turned on, in Sirius mode, andhave an unobstructed view of the skyin order for the radio to receive theactivation signal.

SEEKPress the key• Shortly pressing the key (under 0.8

seconds): select previous or nextchannel.

• Pressing and holding the key (over0.8 seconds): continuously moveto previous or next channel.

❈ If the “Category” icon is displayed,channels are changed within thecurrent category.

SCANPress the key• Shortly pressing the key (under 0.8

seconds): Previews each broad-cast for 5 seconds each

❈ Press the key again tocontinue listening to the currentfrequency

❈ If the “Category” icon is displayed,channels are changed within thecurrent category.

CategoryPress the key Set throughthe TUNE knob• The display will indicate the catego-

ry menus, highlight the categorythat the current channel belongs to.

• In the Category List Mode, pressthe key to navigate cate-gory list.

• Press the tune knob to select thelowest channel in the highlightedcategory.

❈ If channel is selected by selectingcategory, then the “CATEGORY”icon is displayed at the top of thescreen.

CATFOLDER

CATFOLDER

SCAN

SCANRADIO

RADIO


1704

PresetPress the key ~ • Shortly pressing the key (under 0.8

seconds): Plays the frequencysaved in the corresponding key.

• Pressing and holding the key (over0.8 seconds): Pressing and holdingthe desired key from ~ will save the current broadcast tothe selected key and sound aBEEP.

✽✽ Troubleshooting1. Antenna Error

If this message is displayed, theantenna or antenna cable is bro-ken or unplugged. Please consultwith your Kia dealership.

2. Acquiring SignalIf this message is displayed, itmeans that the antenna is coveredand that the SIRIUS™ SatelliteRadio signal is not available.Ensure the antenna is uncoveredand has a clear view of the sky.

Tune• Rotate TUNE knob : Changes

the channel number or scrolls cat-egory list.

• Press TUNE knob : Selects themenu.

MenuSelect category menu through the

TUNE knob Press the key Select [ Info] through the TUNE knob or key

Info (Information)Displays the Artist/Song info of thecurrent song.

1

MENU

61

61RADIO

4 171


BASIC METHOD OF USE :Audio CD / MP3 CD / USB /iPod® / My Music

Press the key to change themod mode in order of CD ➟

USB(iPod®) ➟ AUX ➟ My Music ➟ BTAudio.The folder/file name is displayed onthe screen.

<Audio CD>

<CD MP3>

<USB>

<My Music>

❈ The CD is automatically playedwhen a CD is inserted.

❈ The USB music is automaticallyplayed when a USB is connected.

RepeatWhile song (file) is playing(RPT) keyAudio CD, MP3 CD, USB, iPod®, MyMusic mode: RPT on screen• To repeat one song (press the key)

: Repeats the current song.MP3 CD, USB mode: FLD.RPT onscreen• To repeat folder (pressing twice):

repeats all files within the currentfolder.

❈ Press the key again to turnoff repeat.

RandomWhile song (file) is playing(RDM) keyAudio CD, My Music mode: RDM onscreen• Random (press the key) : Plays all

songs in random order.

2 RDM

1 RPT

1 RPT

MEDIA


1724

MP3 CD, USB mode: FLD.RDM onscreen• Folder Random (press the key) :

Plays all files within the current fold-er in random order.

iPod® mode: ALL RDM on screen• All Random (press the key) : Plays

all files in random order.MP3 CD, USB : ALL RDM on screen• All Random (pressing twice): Plays

all files in random order.❈ Press the key again to turn

off repeat.

Changing Song/FileWhile song (file) is playing

key• Shortly pressing the key : Plays the

current song from the beginning.❈ If the key is pressed

again within 2 second, the previ-ous song is played.

• Pressing and holding the key (over0.8 seconds): Rewinds the song.

While song (file) is playingkey• Shortly pressing the key : Plays the

next song.• Pressing and holding the key (over

0.8 seconds): Fast forwards thesong.

ScanWhile song (file) is playingkey• Shortly pressing the key : Scans all

songs from the next song for 10seconds each.

❈ Press the key again to turnoff.

❈ The SCAN function is not support-ed in iPod® mode.

Folder Search : MP3 CD, USBModeWhile file is playing(Folder Up) key• Searches the next folder.While file is playing(Folder Down) key• Searches the parent folder.❈ If a folder is selected by pressing

the TUNE knob, the first filewithin the selected folder will beplayed.

❈ In iPod® mode, moves to theParent Folder.

Searching Songs (File)• Turning TUNE knob : Searches

for songs (files)• Pressing TUNE knob : Plays

selected song (file).

CATFOLDER

CATFOLDER

SCAN

SCAN

SEEKTRACK

SEEKTRACK

SEEKTRACK

2 RDM

4 173


MENU : Audio CDPress the CD MP3 mode keyto set the Repeat, Random,Information features.

RepeatPress the key Set [ RPT]through the TUNE knob or key to repeat the current song.❈ Press RPT again to turn off.

RandomPress the key Set [ RDM]through the TUNE knob or key to randomly play songs withinthe current folder.❈ Press RDM again to turn off.

InformationPress the key Set [ Info]through the TUNE knob or key to display information of the cur-rent song.❈ Press the key to turn off

info display.

MENU : MP3 CD / USBPress the CD MP3 mode keyto set the Repeat, Folder Random,Folder Repeat, All Random,Information, and Copy features.

RepeatPress the key Set [ RPT]through the TUNE knob or key to repeat the current song.❈ Press RPT again to turn off.

1 RPT

MENU

MENU

MENU

3MENU

2 RDM

MENU

1 RPT

MENU

MENU


1744

Folder RandomPress the key Set [ F.RDM]through the TUNE knob or key to randomly play songs within thecurrent folder.❈ Press F.RDM again to turn off.

Folder RepeatPress the key Set [ F.RPT]through the TUNE knob or key to repeat songs within the cur-rent folder.❈ Press F.RPT again to turn off.

All RandomPress the key Set [ A.RDM]through the TUNE knob or keyto randomly play all songs within theCD.❈ Press A.RDM again to turn off.

InformationPress the key Set [ Info]through the TUNE knob or key to display information of the cur-rent song.❈ Press the key to turn off

info display.

CopyPress the key Set [Copy] through the TUNE knobor key. This is used to copy the currentsong into My Music. You can playthe copied Music in My Musicmode.

❈ If another key is pressed whilecopying is in progress, a pop upasking you whether to cancelcopying is displayed.

❈ If another media is connected orinserted (USB, CD, iPod®, AUX)while copying is in progress, copy-ing is canceled.

❈ Music will not be played whilecopying is in progress.

6

MENU

MENU

5MENU

4MENU

3MENU

2 RDM

MENU

4 175


MENU : iPod®

In iPod® mode, press the keyto set the Repeat, Album Random, AllRandom, Information and Search fea-tures.

RepeatPress the key Set [ RPT]through the TUNE knob or key to repeat the current song.❈ Press RPT again to turn repeat off.

RandomPress the key Set [ RDM]through the TUNE knob or key.Plays all songs within the currentlyplaying category in random order.❈ Press RDM again to turn off.

InformationPress the key Set [ Info]through the TUNE knob or key.Displays information of the currentsong.❈ Press the key to turn off

info display.

SearchPress the key Set [ Search]through the TUNE knob or key.Displays iPod® category list.❈ Searching iPod® category is

key pressed, move to par-ent category.MENU

4MENU

MENU

3MENU

2MENU

1 RPT

MENU

MENU


1764

MENU : My Music Mode

In My Music mode, press the key to set the Repeat, Random,Information, Delete, Delete All, andDelete Selection features.

RepeatPress the key Set [ RPT]through the TUNE knob or key.Repeats the currently playing song.❈ Press RPT again to turn repeat off.

RandomPress the key Set [ RDM]through the TUNE knob or key.Plays all songs in random order.❈ Press RDM again to turn random off.

InformationPress the key Set [ Info]through the TUNE knob or key.Displays information of the currentsong.❈ Press the key to turn off

info display.

DeletePress the key Set [ Delete]through the TUNE knob or key. Deletes currently playing file

In the play screen, pressing deletewill delete the currently playing song. Deletes file from list

➀ Select the file you wish to deleteby using the TUNE knob.

➁ Press the key and selectthe delete menu to delete theselected file.

Delete AllPress the key Set [ Del.All]through the TUNE knob or key.Deletes all songs of My Music.

Delete SelectionPress the key Set [ Del.Sel]through the TUNE knob or key.Songs within My Music are selectedand deleted.➀ Select the songs you wish to

delete from the list.

6MENU

5MENU

MENU

4MENU

MENU

3MENU

2 RDM

MENU

1 RPT

MENU

MENU

4 177


➁ After selecting, press keyand select the delete menu.

My Music• Even if memory is available, a

maximum of 6,000 songs can bestored.

• The same song can be copied upto 1,000 times.

• Memory info can be checked in theSystem menu of Setup.

AUXAUX is used to play external MEDIAcurrently connected with the AUXterminal.AUX mode will automatically startwhen an external device is connect-ed with the AUX terminal.If an external device is connected,you can also press the key tochange to AUX mode.

❈ AUX mode cannot be startedunless there is an external deviceconnected to the AUX terminal.

AUXFully insert the AUX cable into theAUX terminal for use.

MEDIA

MENU


1784

Bluetooth® Wireless TechnologyAUDIO

What is Bluetooth® WirelessTechnology?Bluetooth® Wireless Technologyallows devices to be connected in ashort distance, including hands-freedevices, stereo headsets, wirelessremote controllers, etc. For moreinformation, visit the Bluetooth®

Wireless Technology website atwww.Bluetooth.com

Before using Bluetooth® WirelessTechnology audio features• Bluetooth® Wireless Technology

audio may not be supported depend-ing on the compatibility of yourBluetooth® Wireless Technologymobile phone.

• In order to use Bluetooth® WirelessTechnology audio, you must firstpair and connect the Bluetooth®

Wireless Technology mobile phone.

• The Bluetooth® word mark andlogos are registered trademarksowned by Bluetooth SIG, Inc. andany use of such marks by Kia isunder license. Other trademarksand trade names are those of theirrespective owners. A Bluetooth®

enabled cell phone is required touse Bluetooth® Wireless Technology

• Bluetooth® Wireless Technologyaudio can be used only when the[Audio Streaming] of Phone isturned .

❈ Setting Bluetooth® WirelessTechnology Audio Streaming : Pressthe key Select [Phone]through the tune knob or keySelect [Audio Streaming] throughthe TUNE knob Set /

Starting Bluetooth® WirelessTechnology Audio• Press the key to change the

mode in order of CD ➟ USB ➟ AUX➟ My Music ➟ BT Audio.

• If BT Audio is selected, Bluetooth®

Wireless Technology audio will startplaying.

❈ Audio may not automatically startplaying in some mobile phones.

MEDIA

OffOn

3SETUP

On


result in a loss of vehicle controlthat may lead to an accident,severe personal injury, anddeath. The driver’s primaryresponsibility is in the safe andlegal operation of a vehicle, anduse of any handheld devices,other equipment, or vehicle sys-tems which take the driver’seyes, attention and focus awayfrom the safe operation of a vehi-cle or which are not permissibleby law should never be usedduring operation of the vehicle.

4 179


Using the Bluetooth® WirelessTechnology audio features• Play / StopPress the TUNE knob to play andpause the current song.

• Previous / Next songPress or to playprevious or next song.❈ The previous song / next song /

play / pause functions may not besupported in some mobile phones.

PHONE

Making a call using theSteering-wheel mount controls

(1) MUTE button : Mute the micro-phone during a call.

(2) VOLUME button : Raises or low-ers speaker volume.

(3) button : Activates voice recog-nition.

(4) button : Places and transferscalls.

(5) button : Ends calls or cancelsfunctions.

• Check call history and making call➀ Shortly press (under 0.8 seconds)

the key on the steeringremote controller.

➁ The call history list will be dis-played on the screen.

➂ Press the key again to con-nect a call to the selected number.

• Redialing the most recently callednumber

➀ Press and hold (over 0.8 seconds)the key on the steeringremote controller.

➁ The most recently called numberis redialed.

SEEKTRACK

SEEKTRACK


1804

Bluetooth® Wireless Technology

Pairing a Bluetooth® WirelessTechnology Device

What is Bluetooth® WirelessTechnology Pairing?Pairing refers to the process of syn-chronizing your Bluetooth® WirelessTechnology phone or device with thecar audio system for connection.Pairing is necessary to connect anduse the Bluetooth® WirelessTechnology feature.The Bluetooth® word mark and logosare registered trademarks owned byBluetooth SIG, Inc. and any use ofsuch marks by Kia is under license.Other trademarks and trade namesare those of their respective owners.A Bluetooth® enabled cell phone isrequired to use Bluetooth® wirelesstechnology

Pairing Key / Key onthe Steering Remote Controller

When No Devices have been Paired1. Press the key or the key

on the steering remote controller.Thefollowing screen is displayed.

2. Select [OK] button to enter thePair Phone screen.

1) Car Name : Name of device asshown when searching from yourBluetooth® Wireless Technologydevice

2) Passkey : Passkey used to pairthe device

PHONE

PHONEWARNING

• Driving while distracted canresult in a loss of vehicle controlthat may lead to an accident,severe personal injury, anddeath. The driver’s primaryresponsibility is in the safe andlegal operation of a vehicle, anduse of any handheld devices,other equipment, or vehicle sys-tems which take the driver’seyes, attention and focus awayfrom the safe operation of a vehi-cle or which are not permissibleby law should never be usedduring operation of the vehicle.

4 181


3. From your Bluetooth® WirelessTechnology device (i.e. MobilePhone), search and select yourcar audio system.

4. After a few moments, a screen isdisplayed where the passkey isentered. Here, enter the passkey“0000” to pair your Bluetooth®

Wireless Technology device withthe car audio system.

5. Once pairing is complete, the fol-lowing screen is displayed.

Some phones (i.e., iPhone, Androidand Blackberry phones) may offer anoption to allow acceptance of allfuture Bluetooth® connectionrequests by default." and "Visithttp://www.kia.com/#/bluetooth foradditional information on pairing yourBluetooth-enabled mobile phone, andto view a phone compatibility list.

• If Bluetooth® Wireless Technologydevices are paired but none arecurrently connected, pressing the

key or the key on thesteering wheel displays the follow-ing screen. Select [Pair] button topair a new device or select[Connect] to connect a previouslypaired device.

Pairing through [PHONE] SetupPress the key Select[Phone] Select [Pair Phone] Select TUNE knob

1. The following steps are the sameas those described in the section"When No Devices have beenPaired" on the previous page.

• Bluetooth® Wireless Technology fea-tures supported within the vehicle areas follows. Some features may not besupported depending on yourBluetooth® Wireless Technologydevice.- Outgoing/Incoming Handsfree calls- Operations during a call (Switch to

Private, Switch to call waiting, MICon/off)

- Downloading Call History- Downloading Mobile Contacts- Bluetooth® Wireless Technology

device auto connection- Bluetooth Audio Streaming

• Up to five Bluetooth® WirelessTechnology devices can be paired tothe Car Handsfree system.

• Only one Bluetooth® WirelessTechnology device can be connectedat a time.

SETUP

PHONE


1824

• Other devices cannot be paired whilea Bluetooth® Wireless Technologydevice is connected.

• Only Bluetooth® Wireless TechnologyHandsfree and Bluetooth audio relat-ed features are supported.

• Bluetooth related operations are pos-sible only within devices that supportHandsfree or audio features, such asa Bluetooth® Wireless Technologymobile phone or a Bluetooth audiodevice.

• If a connected Bluetooth® WirelessTechnology device becomes discon-nected due to being out of communi-cation range, turning the device OFF,or a Bluetooth® Wireless Technologycommunication error, correspondingBluetooth® Wireless Technologydevices are automatically searchedand reconnected.

• If the system becomes unstable dueto communication errors between thecar Handsfree and the Bluetooth®

Wireless Technology device, reset thedevice by turning off and back onagain. Upon resetting Bluetooth®

Wireless Technology device, the sys-tem will be restored.

• After pairing is complete, a contactsdownload request is sent once to themobile phone. Some mobile phonesmay require confirmation upon receiv-ing a download request, ensure yourmobile phone accepts the connection.Refer to your phones user’s manualfor additional information regardingphone pairing and connections.

Connecting a Device

Press the key Select[Phone] Select [Phone List]

1) Connected Phone : Device that iscurrently connected

2) Paired Phone : Device that ispaired but not connected

From the paired phone list, select thedevice you want to connect andselect [Connect].

SETUP

4 183


Changing Priority

What is Priority?It is possible to pair up to fiveBluetooth® Wireless Technologydevices with the car audio system.The "Change Priority" feature is usedto set the connection priority ofpaired phones.


From the paired phone list, selectthe phone you want to switch to thehighest priority, then select [ChangePriority] button from the Menu. Theselected device will be changed tothe highest priority.

• Priority icon will be displayed whenthe selected phone is set as a pri-ority phone.

SETUP


1844

Disconnecting a Device


From the paired phone list, select thecurrently connected device andselect [Disconnect] button.

Deleting a Device


From the paired phone list, select thedevice you want to delete and select[Delete] button.

• When deleting the currently con-nected device, the device will auto-matically be disconnected to pro-ceed with the deleting process.

• If a paired Bluetooth® WirelessTechnology device is deleted, thedevice’s call history and contactsdata will also be deleted.

• To re-use a deleted device, youmust pair the device again.

SETUP SETUP

4 185


USING Bluetooth® WirelessTechnology

Phone Menu Screen

Phone MenusWith a Bluetooth® WirelessTechnology device connected, pressthe key to display the Phonemenu screen.

1) Favorite : Up to 20 frequently usedcontacts saved for easy access

2) Call History : Displays the call his-tory list screen

3) Contacts : Displays the Contactslist screen

4) Setup : Displays Phone relatedsettings.

• If you select the [Call History] but-ton but there is no call history data,a prompt is displayed which asks todownload call history data.

• If you select the [Contacts] buttonbut there is no contacts datastored, a prompt is displayed whichasks to download contacts data.

• This feature may not be supportedin some mobile phones. For moreinformation on download support,refer to your mobile phone user’smanual.

Answering Calls

Answering a CallAnswering a call with a Bluetooth®

Wireless Technology device connect-ed will display the following screen.To accept the call, press key onthe steering wheel while the call isincoming.

1) Caller : Displays the other party’sname when the incoming caller issaved within your contacts

2) Incoming Number : Displays theincoming number

PHONE


1864

• When an incoming call pop-up isdisplayed, most Audio and SETUPmode features are disabled. Onlythe call volume will operate.

• The telephone number may not beproperly displayed in some mobilephones.

• When a call is answered with themobile phone, the call mode willautomatically revert to Privatemode.

Favorites

Press the key Select[Favorites]

1) Saved favorite contact : Connectscall upon selection

2) To add favorite : Downloaded con-tacts be saved as favorite.

• To save Favorite, contacts shouldbe downloaded.

• Contact saved in Favorites will notbe automatically updated if the con-tact has been updated in thephone. To update Favorites, deletethe Favorite and create a newFavorite.

Call History

Press the key Select [CallHistory]

A list of incoming, outgoing andmissed calls is displayed.• Call history may not be saved in the

call history list in some mobilephones.

• Calls received with hidden caller IDwill not be saved in the call historylist.

• Calling through the call history is notpossible when there is no call histo-ry stored or a Bluetooth® WirelessTechnology phone is not connected.

• Up to 20 received, dialed and missedcalls are stored in Call History.

• Time of received/dialed calls and calltime information are not saved.

PHONE PHONE

4 187


Contacts

Press the key Select[Contacts]

The list of saved phone book entriesis displayed.

• Up to 1,000 contacts saved in yourBluetooth® Wireless Technologyphone can be downloaded into thecar contacts. Contacts that havebeen downloaded to the car cannotbe edited or deleted on the phone.

• Mobile phone contacts are managedseparately for each pairedBluetooth® Wireless Technologydevice (max 5 devices x 1,000 con-tacts each). Previously downloadeddata is maintained even if theBluetooth® Wireless Technologydevice has been disconnected.(However, the contacts and call his-tory saved to the phone will be delet-ed if a paired phone is deleted.)

• It is possible to download contactsduring Bluetooth streaming audio.

• When downloading contacts, theicon will be displayed within the sta-tus bar.

• It is not possible to begin download-ing a contact list when the contactdownload feature has been turnedoff within the Bluetooth® WirelessTechnology device. In addition, somedevices may require device authori-zation upon attempting to downloadcontacts. If downloading does notnormally occur, check the Bluetooth®

Wireless Technology device settingsor the screen state.

• The contacts download feature maynot be supported in some mobilephones. For more information of sup-ported Bluetooth® devices and func-tion support, refer to your phone’suser manual.

PHONE

Bluetooth® WirelessTechnology Setting

The Bluetooth® word mark and logosare registered trademarks owned byBluetooth SIG, Inc.and any use of suchmarks by Kia is under license. Othertrademarks and trade names are thoseof their respective owners. A Bluetooth®

enabled cell phone is required to useBluetooth® wireless technology

Pairing a New DevicePress the key Select[Phone] Select [Pair Phone]

Bluetooth® Wireless Technologydevices can be paired with the audiosystem.For more information, refer to the“Pairing through Phone Setup” sectionwithin Bluetooth® Wireless Technology.

Viewing Paired Phone ListPress the key Select[Phone] Select [Phone List]

This feature is used to view mobilephones that have been paired withthe audio system. Upon selecting apaired phone, the setup menu is dis-played.For more information, refer to the“Setting Bluetooth® WirelessTechnology Connection” section with-in Bluetooth® Wireless Technology.1) Connect/Disconnect Phone :

Connect/ disconnects currentlyselected phone

2) Change Priority : Sets currentlyselected phone to highest connec-tion priority

3) Delete : Deletes the currentlyselected phone

4) Return : Moves to the previousscreen

SETUP

SETUP


1884


result in a loss of vehicle con-trol that may lead to an acci-dent, severe personal injury,and death.The driver’s primaryresponsibility is in the safe andlegal operation of a vehicle,and use of any handhelddevices, other equipment, orvehicle systems which take thedriver’s eyes, attention andfocus away from the safe oper-ation of a vehicle or which arenot permissible by law shouldnever be used during operationof the vehicle.

4 189


• To learn more about whether yourmobile phone supports contactsdownloads, refer to your mobilephone user’s manual.

• The contacts for only the connectedphone can be downloaded

Downloading ContactsPress the key Select[Phone] Select [Contacts Download]

As the contacts are downloadedfrom the mobile phone, a downloadprogress bar is displayed.

• Upon downloading phone contacts,the previous corresponding data isdeleted.

• This feature may not be supportedin some mobile phones.

• Voice Recognition may not operatewhile contacts are being down-loaded.

Auto Download (Contacts)Press the key Select[Phone] Select [Auto Download]

This feature is used to automaticallydownload mobile contacts entriesonce a Bluetooth® WirelessTechnology phone is connected.

• The Auto Download feature willdownload mobile contacts entriesevery time the phone is connected.The download time may differdepending on the number of savedcontacts entries and the communi-cation state.

• Before downloading contacts, firstcheck to see that your mobilephone supports the contactsdownload feature.

SETUP SETUP


1904

Audio StreamingPress the key Select[Phone] Select [Audio Streaming]

When Audio Streaming is turned on,you can play music files saved inyour Bluetooth® Wireless Technologydevice through the audio system.

Outgoing VolumePress the key Select[Phone] Select [Outgoing Volume]

Use TUNE knob to adjust the out-going volume level.

• While on a call, the volume can bechanged by using the key.

Turning Bluetooth System OffPress the key Select[Phone] Select [Bluetooth SystemOff]Once Bluetooth® Wireless Technologyis turned off, Bluetooth® WirelessTechnology related features will notbe supported within the audio system.

• To turn Bluetooth® WirelessTechnology back on, go to

[Phone] and select “Yes”.SETUP

SETUP

SEEKTRACK

SETUP SETUP

4 191


VOICE RECOGNITION

Using Voice Recognition

Starting Voice RecognitionShortly press the key on thesteering wheel Say a command

If prompt feedback is in [ON], thenthe system will say “Please say acommand after the beep (BEEP)”• If prompt feedback is in [OFF]

mode, then the system will only say“(BEEP)”

• To change Prompt Feedback[On]/[Off], go to [System]

[Prompt Feedback]• For proper recognition, say the

command after the voice instruc-tion and beep tone.

Contact List Best Practices1) Do not store single-name entries

(e.g., “Bob”, “Mom”, “Kim”, etc.).Instead, always use full names(including first and last names) forall contacts (e.g., use “JacobStevenson” instead of “Dad”).

2) Do not use abbreviations (i.e., use“Lieutenant” instead of “Lt.” or“Sergeant” instead of “Sgt.”).

3) Do not use acronyms (i.e., use“County Finance Department”instead of “CFD”).

4) Do not use special characters(e.g., “@”, “hyphen -“, “asterisk *”,ampersand &”).

5) If a name is not recognized fromthe contact list, change it to amore descriptive name (e.g., use“Grandpa Joseph” instead of “PaJoe”).

Skipping Prompt MessagesWhile prompt message is being stat-ed Shortly press the key on thesteering remote controller The prompt message is immediatelyended and the beep tone will sound.After the “beep”, say the voice com-mand.

Re-starting Voice RecognitionWhile system waits for a commandShortly press the key on thesteering remote controller The command wait state is immedi-ately ended and the beep ton willsound. After the “beep”, say the voicecommand.

SETUP


1924

ENDING VOICERECOGNITION

While Voice Recognition is operatingPress and hold the key on the

steering remote controller

• While using voice command, press-ing any steering wheel control or adifferent key will end voice com-mand.

• When the system is waiting for avoice command, say “cancel” or“end” to end voice command.

• When the system is waiting for avoice command, press and hold the

key on the steering wheel toend voice command.

Voice Recognition and PhoneContact Tips:The Kia Voice Recognition Systemmay have difficulty understandingsome accents or uncommon names.When using Voice Recognition toplace a call, speak in a moderatetone, with clear pronunciation Tomaximize the use of VoiceRecognition, consider these guide-lines when storing contacts:• Do not store single-name entries

(e.g., “Bob”, “Mom”, etc.). Instead,always use full names (including firstand last names) for these contacts

• Do not use special characters (e.g.,'@', '-', '*', '&', etc.)

• Do not use abbreviations (i.e., use"Lieutenant" instead of "Lt.") oracronyms (i.e., use "County FinanceDepartment" instead of "C. F. D."; Besure to say the name exactly as it isentered in the contacts list

4 193


Illustration on using voice commands

• Starting voice command.Shortly pressing the key (under 0.8 seconds):

• Skipping Voice RecognitionShortly pressing the key (under 0.8 seconds):

• End voice command.Shortly pressing the key (under 0.8 seconds):

while guidance message is being stated

More Help

Contacts

Cancel

More Help

Please say a command afterthe beep (BEEP)

Please say a...

More Help.You can say Radio, FM, AM, SIRIUS™, Media, CD,USB, Aux, My Music, iPod®, Bluetooth® Audio,Phone, Call History or Contacts. Please say a com-mand.

Contacts.Please say the name of the contact you want to call.

More Help.You can say Radio, FM, AM, SIRIUS™, Media, CD,USB, Aux, My Music, iPod®, Bluetooth® Audio,Phone, Call History or Contacts. Please say a com-mand.

(BEEP)

(BEEP)

Beep Beep.. (end beep)

Shortly pressing the key (under 0.8 seconds)

Beep~


1944

Voice Command List• Common Commands: These commands can be used in most operations. (However a few commands may not be

available during certain operations)

Command FunctionMore Help Provides guidance on commands that can be

used anywhere in the system.

Help Provides guidance on commands that can beused within the current mode.

Call<Name> Calls <Name> saved in ContactsEx) Call John Smith

Phone Provides guidance on Phone related com-mands. After saying this command, say“Favorites”,“Call History”, “Contacts” or ”DialNumber” execute corresponding functions.

Favorites Display the Favorite screen.

Call History Displays the Call History screen.

Contacts Displays the Contacts screen. After sayingthis command, say the name of a contactsaved in the Contacts to automatically con-nect the call.

Dial Number Display the Dial number screen. After sayingthis command, you can say the number thatyou want to call.

Redial Connects the most recently called number.

Command Function• When listening to the radio, displays the next

radio screen. (FM1➟FM2➟AM➟SAT1➟

SAT2➟SAT3➟FM1)

Radio • When listening to a different mode, displaysthe most recently played radio screen.

• When currently listening to the FM radio,maintains the current state.

• When listening to a different mode, displaysthe most recently played FM screen.

FM1(FM One) Displays the FM1 screen.

FM2(FM Two) Displays the FM2 screen.

AM Displays the AM screen.

FM Preset 1~6 Plays the most recently played broadcastsaved in FM Preset 1~6.

AM Preset 1~6 Plays the broadcast saved in AM Preset 1~6.

FM 87.5~107.9 Plays the FM broadcast of the correspondingfrequency.

AM 530~1710 Plays the AM broadcast of the correspondingfrequency.

SIRIUS™ • When currently listening to the SIRIUS™,maintains the current state.

• When listening to a different mode, displaysthe most recently played SIRIUS™ screen.

(Call by Name)

(Satellite)

4 195


Command FunctionSIRIUS™ (Satellite) Displays the selected SIRIUS™ screen.

SIRIUS™ Channel Plays the selected SIRIUS™ channel.

Media Moves to the most recently played mediascreen.

CD Plays the music saved in the CD.

USB Plays USB music.

iPod® Plays iPod music.

Command FunctionMy Music Plays the music saved in My Music.

AUX (Auxiliary) Plays the connected external device.

Bluetooth® Audio Plays the music saved in connected Bluetooth®

device.

Please repeat Repeats the most recent comment.

Cancel (Exit) Ends voice command.

0~223

1~3


1964

• FM/AM radio commands: Commands available duringFM, AM radio operation

• Satellite radio commands: Commands that can beused while listening to Satellite Radio.

Command FunctionPreset 1~6 Plays the broadcast station saved in Preset 1~6.

Auto Store Automatically selects radio broadcast fre-quencies with superior reception and saves inPresets 1~6.

Seek up Plays the next (higher) receivable broadcast.

Seek down Plays the previous (lower) receivable broadcast.

Scan Scans receivable frequencies from the currentbroadcast and plays for 10 seconds each.

Preset Scan Moves to the next preset from the currentpresent and plays for 10 seconds each.

Information Displays the information of the current broad-cast.(This feature can be used when receivingRBDS broadcasts.)

Command FunctionScan Scans receivable channels from the current

broadcast and plays for 10 seconds each.

Preset 1~6 Plays the broadcast saved in Preset 1~6.

Information Displays the information of the current broad-cast.

4 197


• Audio CD commands: Commands available duringAudio CD operation

• MP3 CD / USB commands: Commands available dur-ing USB and MP3 CD operation

Command FunctionRandom Randomly plays the tracks within the CD.

Random Off Cancels random play to play tracks in sequen-tial order.

Repeat Repeats the current track.

Repeat Off Cancels repeat play to play tracks in sequen-tial order.

Scan Scans the tracks from the next track for 10seconds each.

Track 1~30 Plays the desired track number.

Information Displays the information screen of the currenttrack.

Command FunctionRandom Randomly plays the files within the current

folder.

All Random Randomly plays all saved files.

Random Off Cancels random play to play files in sequentialorder.

Repeat Repeats the current file.

Folder Repeat Repeats all files in the current folder.

Repeat Off Cancels repeat play to play files in sequentialorder.

Next File Plays the next file.

Previous File Plays the previous file.

Scan Scans the files from the next files for 10 sec-onds each.

Information Displays the information screen of the currentfile.

Copy Copies the current file into My Music.


1984

• iPod® Commands: Commands available during iPod®

operation• My Music Commands: Commands available during

My Music operation

Command FunctionRandom Randomly plays the songs within the current

category.

Random Off Cancels random play to play songs in sequen-tial order.

Repeat Repeats the current song.

Repeat Off Cancels repeat play to play songs in sequen-tial order.

Information Displays the information screen of the currentsong.

Command FunctionRandom Randomly plays all saved files.

Random Off Cancels random play to play files in sequentialorder.

Repeat Repeats the current file.

Repeat Off Cancels repeat play to play files in sequentialorder.

Scan Scans the files from the next files for 10 sec-onds each.

Information Displays the information screen of the currentfile.

Delete Deletes the current file. You will bypass anadditional confirmation process.

Delete All Deletes all files saved in My Music. You willbypass an additional confirmation process.

4 199


• Bluetooth® Wireless Technology Audio Commands:Commands available during Bluetooth® WirelessTechnology audio streaming from mobile phone oper-ation Command Operation

Command FunctionPlay Plays the currently paused song.

Pause Pauses the current song.

iPod® is a registered trademark of Apple Inc. iPod®

mobile digital device sold separately.The Bluetooth® word mark and logos are registeredtrademarks owned by Bluetooth SIG, Inc. and any useof such marks by Kia is under license.A Bluetooth® enabled cell phone is required to useBluetooth® wireless technology.SiriusXM™ service requires a subscription, sold sepa-rately, after 3-month trial included with vehicle pur-chase. If you decide to continue yourSiriusXM™ service at the end of the trial subscription,the plan you choose will automatically renew and bill atthe current rates until you callSiriusXM™ at 1-866-635-2349 to cancel. See ourCustomer Agreement for complete terms at www.sir-iusxm.com. Sirius satellite service is availableonly to those at least 18 and older in the 48 contiguousUnited States, D.C., and P.R. (with coverage limita-tions). SiriusXM™ Traffic available inselect markets. See siriusxm.com/traffic for more infor-mation. Sirius, XM and all related marks and logos aretrademarks of Sirius XM Radio Inc.

Driving your vehicle

Before driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Key positions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Engine start/stop button . . . . . . . . . . . . . . . . . . . . . 5-7

• Illuminated ENGINE START/STOP button . . . . . . . 5-7• ENGINE START/STOP button position. . . . . . . . . . . 5-7

Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . 5-10Manual transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

• Manual transaxle operation . . . . . . . . . . . . . . . . . . . . 5-13Automatic transaxle . . . . . . . . . . . . . . . . . . . . . . . . 5-16

• Automatic transaxle operation . . . . . . . . . . . . . . . . . . 5-16Brake system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22

• Power brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22• Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23• Anti-lock brake system (ABS) . . . . . . . . . . . . . . . . . . 5-25• Electronic stability control (ESC) . . . . . . . . . . . . . . . 5-27• Hill-start assist control (HAC) . . . . . . . . . . . . . . . . . . 5-31• Vehicle stability management (VSM) . . . . . . . . . . . . 5-31

Cruise control system. . . . . . . . . . . . . . . . . . . . . . . 5-35Active eco system . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40Economical operation . . . . . . . . . . . . . . . . . . . . . . 5-41

Special driving conditions . . . . . . . . . . . . . . . . . . . 5-43• Hazardous driving conditions . . . . . . . . . . . . . . . . . . 5-43• Rocking the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-43• Smooth cornering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44• Driving at night . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44• Driving in the rain. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45• Driving in flooded areas . . . . . . . . . . . . . . . . . . . . . . . 5-45• Driving off-road. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46• Highway driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46

Winter driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47Trailer towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49Vehicle load limit . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50

• Tire and loading information label . . . . . . . . . . . . . . 5-50• Certification label . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-53

Vehicle weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55• Base curb weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55• Vehicle curb weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55• Cargo weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55• GAW (Gross axle weight) . . . . . . . . . . . . . . . . . . . . . . 5-55• GAWR (Gross axle weight rating) . . . . . . . . . . . . . . . 5-55• GVW (Gross vehicle weight) . . . . . . . . . . . . . . . . . . . 5-55• GVWR (Gross vehicle weight rating) . . . . . . . . . . . . 5-55

5


25

Be sure the exhaust systemdoes not leak.The exhaust system should bechecked whenever the vehicle israised to change the oil or for anyother purpose. If youhear a change in the sound of theexhaust or if you drive over some-thing that strikes the underneath sideof the vehicle, have the exhaust sys-tem checked as soon as possible byan authorized Kia dealer.

WARNING - Engineexhaust

Do not inhale exhaust fumes orleave your engine running in anenclosed area for a prolongedtime.Exhaust fumes contain carbonmonoxide, a colorless, odorlessgas that can cause uncon-sciousness and death byasphyxiation.

WARNING - Open trunkDo not drive with the trunkopen.Poisonous exhaust gases canenter the passenger compart-ment. If you must drive with thetrunk open proceed as follows:1.Close all windows.2.Open side vents.3.Set the air intake control at

"Fresh", the air flow control at"Floor" or "Face" and the fanat the highest speed.

Before entering vehicle• Be sure that all windows, outside

mirror(s), and outside lights areclean.

• Check the condition of the tires.• Check under the vehicle for any

sign of leaks.• Be sure there are no obstacles

behind you if you intend to back up.

Necessary inspections Fluid levels, such as engine oil,engine coolant, brake fluid, andwasher fluid should be checked on aregular basis, with the exact intervaldepending on the fluid. Furtherdetails are provided in Chapter 7,“Maintenance”.

Before starting • Close and lock all doors.• Position the seat so that all con-

trols are easily reached.• Buckle your seat belt.• Adjust the inside and outside

rearview mirrors.• Be sure that all lights work.• Check all gauges.• Check the operation of warning

lights when the ignition switch isturned to the ON position.

• Release the parking brake andmake sure the brake warning lightgoes off.

For safe operation, be sure you arefamiliar with your vehicle and itsequipment.

BEFORE DRIVING

5 3


WARNING - Distracteddriving

Focus on the road while driving.The driver's primary responsi-bility is in the safe and legaloperation of the vehicle. Use ofany hand held devices, otherequipment or vehicle systemsthat distract the driver shouldnot be used during vehicleoperation.

WARNING - Check surrounding

Always check the surroundingareas near your vehicle for peo-ple, especially children, beforeputting a vehicle into D (Drive)or R (Reverse).


45

WARNING - Fire riskWhen you intend to park or stopthe vehicle with the engine on,be careful not to depress theaccelerator pedal for a longperiod of time. It may overheatthe engine or exhaust systemand cause a fire.

WARNING - Drivingwhile intoxicated

Do not drive while intoxicated.Drinking and driving is danger-ous. Even a small amount ofalcohol will affect your reflexes,perceptions and judgment.Driving while under the influ-ence of drugs is as dangerousas or more dangerous than driv-ing drunk.

WARNING - Looseobject

Securely store items in yourvehicle. When you make a sud-den stop or turn the steeringwheel rapidly, loose objectsmay drop on the floor and itcould interfere with the opera-tion of the foot pedals, possiblycausing an accident.

5 5


Illuminated ignition switch (if equipped)

Whenever a front door is opened, theignition switch will illuminate for yourconvenience, provided the ignitionswitch is not in the ON position. Thelight will go off immediately when theignition switch is turned on. It willalso go off after about 30 secondsafter the door is closed.

Ignition switch positionLOCK

The steering wheel locks to protectagainst theft. The ignition key can beremoved only in the LOCK position.When turning the ignition switch tothe LOCK position, push the keyinward at the ACC position and turnthe key toward the LOCK position.

The anti-theft steering column lock isnot a substitute for the parking brake.Before leaving the driver’s seat,always make sure the shift lever isengaged in 1st gear for the manualtransaxle or P (Park) for the auto-matic transaxle, set the parkingbrake fully and shut the engine off.

KEY POSITIONS

OYDDDR3001 OYDDDR3002


65

ACC (Accessory)The steering wheel is unlocked andelectrical accessories are operative.If difficulty is experienced turning theignition switch to the ACC position,turn the key while turning the steer-ing wheel right and left to release thetension.

ONThe warning lights can be checkedbefore the engine is started. This isthe normal running position after theengine is started.Do not leave the ignition switch ON ifthe engine is not running to preventbattery discharge.

STARTTurn the ignition switch to the STARTposition to start the engine. Theengine will crank until you releasethe key; then it returns to the ONposition. The brake warning light canbe checked in this position.

WARNING - Ignitionswitch

Never turn the ignition switch toLOCK or ACC while the vehicleis moving. This would result inloss of directional control andbraking function, which couldcause an accident.

WARNING - Steeringwheel

Never reach for any controlsthrough the steering wheelwhile the vehicle is in motion.The presence of your hand orarm in this area could cause aloss of vehicle control.

5 7


Illuminated ENGINESTART/STOP button

Whenever the front door is opened,the ENGINE START/STOP buttonwill illuminate for your convenience.The light will go off after about 30seconds after the door is closed.

ENGINE START/STOP buttonpositionOFF

To turn off the engine (START/STOPposition) or vehicle power (ON posi-tion), press the ENGINESTART/STOP button with the shiftlever in the P (Park) position. Whenyou press the ENGINESTART/STOP button without the shiftlever in the P (Park) position, theENGINE START/STOP button willnot change to the OFF position but tothe ACC position.

In an emergency situation while thevehicle is in motion, you are able toturn the engine off and to the ACCposition by pressing the ENGINESTART/STOP button for more than 2seconds or 3 times successivelywithin 3 seconds. If the vehicle is stillmoving, you can restart the enginewithout depressing the brake pedalby pressing the ENGINESTART/STOP button with the shiftlever in the N (Neutral) position(if smart key equipped).

ENGINE START/STOP BUTTON (IF EQUIPPED)

OYDDDR3005

White


85

ACC(Accessory)

Press the ENGINE START/STOPbutton while it is in the OFF positionwithout depressing the brake pedal.The steering wheel unlocks andelectrical accessories are opera-tional.If the ENGINE START/STOP buttonis in the ACC position for more than1 hour, the button is turned off auto-matically to prevent battery dis-charge.

ON

Press the ENGINE START/STOPbutton while it is in the ACC positionwithout depressing the brake pedal.The warning lights can be checkedbefore the engine is started. Do notleave the ENGINE START/STOPbutton in the ON position for a longtime. The battery may discharge,because the engine is not running.

START/RUN

To start the engine, depress thebrake pedal and press the ENGINESTART/STOP button with the shiftlever in the P (Park) or the N(Nuetral) position. For your safety,start the engine with the shift lever inthe P (Park) position.If you press the ENGINESTART/STOP button withoutdepressing the brake pedal, theengine will not start and the buttonwill change as follows:OFF ➔ ACC ➔ ON ➔ OFF

Not illuminated Orange Red

5 9


If you leave the ENGINE START/STOP button in the ACC or ON posi-tion for a long time, the battery willdischarge.

WARNING - Starting vehicle

Never press the ENGINESTART/STOP button while thevehicle is in motion. This wouldresult in loss of directional con-trol and braking function, whichcould cause an accident.


105

Starting the engine with anignition key (if equipped) 1.Make sure the parking brake is

applied.2.Manual Transaxle - Depress the

clutch pedal fully and shift thetransaxle into Neutral. Keep theclutch pedal and brake pedaldepressed while turning the igni-tion switch to the start position.Automatic Transaxle - Place thetransaxle shift lever in P (Park).Depress the brake pedal fully.You can also start the engine whenthe shift lever is in the N (Neutral)position.

3.Turn the ignition switch to STARTand hold it there until the enginestarts (a maximum of 10 seconds),then release the key.

4.In extremely cold weather (below 0°F / -18°C) or after the vehicle hasnot been operated for several days,let the engine warm up withoutdepressing the accelerator.

Whether the engine is cold or warm,it should be started withoutdepressing the accelerator.

If the engine stalls while the vehicleis in motion, do not attempt to movethe shift lever to the P (Park) posi-tion. If traffic and road conditions per-mit, you may put the shift lever in theN (Neutral) position while the vehicleis still moving and turn the ignitionswitch to the START position in anattempt to restart the engine.

STARTING THE ENGINE

WARNING - Properfootwear

Always wear appropriate shoeswhen operating your vehicle.Unsuitable shoes (high heels,ski boots, sandals, etc.) mayinterfere with your ability to usethe brake and accelerator ped-als.

CAUTION - StarterDo not engage the starter formore than 10 seconds. If theengine stalls or fails to start,wait 5 to 10 seconds before re-engaging the starter. Improperuse of the starter may damageit.

5 11


Starting the engine with asmart key (if equipped)1.Carry the smart key or leave it

inside the vehicle.2.Make sure the parking brake is

firmly applied3.Place the transaxle shift lever in P

(Park).4.Press the ENGINE START/STOP

button while depressing the brakepedal.

5.In extremely cold weather (below0°F / -18°C) or after the vehicle hasnot been operated for several days,let the engine warm up withoutdepressing the accelerator.

Whether the engine is cold or warm,it should be started without depress-ing the accelerator.• Even if the smart key is in the vehi-

cle, but is far away from you, theengine may not start.

• When the ENGINE START/STOPbutton is in the ACC position orabove, if any door is opened, thesystem checks for the smart key. Ifthe smart key is not in the vehi-cle,the “ ” or “ ” indicator willblink or the warning "Key not invehicle" will illuminate on the LCDdisplay. And if all doors are closed,the chime will sound for 5 seconds.The indicator or warning will turnoff while the vehicle is moving.Always have the smart key withyou.

The engine will start only when thesmart key is in the vehicle.

KEYOUT

WARNING - Unintendedvehicle movement

Never leave the smart key in thevehicle with children or vehicleoccupants who are unfamiliarwith the vehicle operation.Pushing the ENGINE START/STOP button while the smartkey is in the vehicle may resultin unintended engine activationand/or unintended vehiclemovement.


125

• If the battery is weak or the smartkey does not work correctly, youcan start the engine by pressingthe engine start/stop button withthe smart key.

• When the stop lamp fuse is blown,you can not start the engine nor-mally. Replace the fuse with a newone. If it is not possible, you canstart the engine by pressing theENGINE START/STOP button for10 seconds while it is in the ACCposition. The engine can start with-out depressing the brake pedal.But for your safety always depressthe brake pedal before starting theengine.

Do not press the ENGINE START/STOP button for more than 10 sec-onds except when the stop lamp fuseis blown.

OYDDDR3006

5 13


Manual transaxle operationThe manual transaxle has 6 forwardgears.This shift pattern is imprinted on theshift knob. The transaxle is fully syn-chronized in all forward gears soshifting to either a higher or a lowergear is easily accomplished.Depress the clutch pedal down fullywhile shifting, then release it slowly.If your vehicle is equipped with anignition lock switch, the engine willnot start when starting the enginewithout depressing the clutch pedal.The shift lever must be returned tothe neutral position before shiftinginto R (Reverse). The button (1)located below the shift knob must bepulled upward while moving the shiftlever to the R (Reverse) position.Make sure the vehicle is completelystopped before shifting into R(Reverse).Never operate the engine with thetachometer (rpm) in the red zone.

MANUAL TRANSAXLE (IF EQUIPPED)

CAUTION - DownshiftingDo not downshift more than 2gears or downshift the gearwhen the engine is running athigh speed (5,000 RPM or high-er). Such downshifting maydamage the engine.

OYDDDR2101

The shift lever can be moved without-pressing the button.

The button (1) should be pressed whenmoving the shift lever into reverse.


145

• During cold weather, shifting maybe difficult until the transaxle lubri-cant is warmed up. This is normaland not harmful to the transaxle.

• If you've come to a complete stopand it's hard to shift into 1st or R(Reverse), leave the shift lever atneutral position and release theclutch. Depress the clutch pedaland then shift into 1st or R(Reverse) gear position.

Using the clutchThe clutch should be depressed allthe way to the floor before shifting,then released slowly. The clutchpedal should always be fullyreleased while driving. Do not restyour foot on the clutch pedal whiledriving. This can cause unnecessarywear. Do not partially engage theclutch to hold the vehicle on anincline. This causes unnecessarywear. Use the foot brake or parkingbrake to hold the vehicle on anincline. Do not operate the clutchpedal rapidly and repeatedly.

DownshiftingWhen you must slow down in heavytraffic or while driving up steep hills,downshift before the engine starts tolabor. Downshifting reduces thechance of stalling and gives betteracceleration when you need toincrease your speed again. When thevehicle is traveling down steep hills,downshifting helps maintain safespeed and prolongs brake life.

CAUTION - Prematurewear

Do not use the shift lever as ahandrest during driving, as thiscan result in premature wear ofthe transaxle shift forks.

WARNING - Incline parking

Before leaving the driver’s seat,always set the parking brakefully and shut the engine off.Then make sure the transaxle isshifted into 1st gear when thevehicle is parked on a level oruphill grade, and shifted into R(Reverse) on a downhill grade.Unexpected and sudden vehiclemovement can occur if theseprecautions are not followed inthe order identified.

5 15


Good driving practices• Never take the vehicle out of gear

and coast down a hill. This isextremely hazardous. Always leavethe vehicle in gear.

• Don't "ride" the brakes. This cancause them to overheat and mal-function. Instead, when you aredriving down a long hill, shift to alower gear. When you do this,engine braking will help slow downthe vehicle.

• Slow down before shifting to alower gear. This will help avoidover-revving the engine, which cancause damage.

• Slow down when you encountercross winds. This gives you muchbetter control of your vehicle.

• Be sure the vehicle is completelystopped before you attempt to shiftinto R (Reverse).The transaxle canbe damaged if you do not.

• Exercise extreme caution whendriving on a slippery surface. Beespecially careful when braking,accelerating or shifting gears. On aslippery surface, an abrupt changein vehicle speed can cause thedrive wheels to lose traction andthe vehicle to go out of control.

• Always buckle-up! In a collision,an unbelted occupant is signifi-cantly more likely to be seriouslyinjured or killed than a properlybelted occupant.

• Never exceed posted speed limits.

WARNING - Vehicle handling

Avoid high speeds when cor-nering or turning. High speedcornering and turning increas-es the risk of vehicle rolloverdue to loss of vehicle control.Rollover accidents are extreme-ly violent and unpredictable.


165

Automatic transaxle operationThe automatic transaxle has 6 for-ward speeds and one reverse speed.The individual speeds are selectedautomatically, depending on theposition of the shift lever.

✽✽ NOTICEThe first few shifts on a new vehicle,if the battery has been disconnected,may be somewhat abrupt. This is anormal condition, and the shiftingsequence will adjust after shifts arecycled a few times by the TCM(Transaxle Control Module) orPCM (Powertrain Control Module).

AUTOMATIC TRANSAXLE (IF EQUIPPED)

OYDDDR2102

+ (UP)

Button

Shift lever

- (DOWN)

To shift, depress the brake pedal and press the button.

The shift lever can be shifted freely.

Press the button when shifting.

5 17


For smooth operation, depress thebrake pedal when shifting from N(Neutral) to a forward or reversegear.

When stopped on an upgrade, do nothold the vehicle with engine power.Use the service brake or the parkingbrake.

Transaxle rangesThe indicator light in the instrumentcluster displays the shift lever posi-tion when the ignition switch is in theON position.

P (Park)Always come to a complete stopbefore shifting into P (Park). Thisposition locks the transaxle and pre-vents the front wheels from rotating.

Shifting into P (Park) while the vehi-cle is in motion will cause the drivewheels to lock which will cause youto lose control of the vehicle.

CAUTION - TransaxleTo avoid damage to yourtransaxle, do not accelerate theengine in R (Reverse) or any for-ward gear position with thebrakes on.The transaxle may bedamaged if you shift into P(Park) while the vehicle is inmotion.


185

R (Reverse)Use this position to drive the vehiclebackward.

N (Neutral)The wheels and transaxle are notengaged. The vehicle will roll freelyeven on the slightest incline unlessthe parking brake or service brakesare applied.

D (Drive)This is the normal forward drivingposition. The transaxle will automati-cally shift through a 6-gearsequence, providing the best fueleconomy and power.

For extra power when passing anoth-er vehicle or climbing grades,depress the accelerator fully, atwhich time the transaxle will auto-matically downshift to the next lowergear. Sports mode

Whether the vehicle is stopped or inmotion, sports mode is selected bypushing the shift lever from the D(Drive) position into the manual gate.To return to D (Drive) range opera-tion, push the shift lever back into themain gate.

In sports mode, moving the shiftlever backwards and forwards willallow you to make gearshifts rapidly.In contrast to a manual transaxle, thesports mode allows gearshifts withthe accelerator pedal depressed.

CAUTION - ShiftingAlways come to a complete stopbefore shifting into or out of R(Reverse); you may damage thetransaxle if you shift into R(Reverse) while the vehicle is inmotion, except when “Rockingthe Vehicle” explained in thissection.

OYDEDR2103CN

++++ ((((UUUUPPPP))))

++++ ((((DDDDOOOOWWWWNNNN))))

Sports mode

5 19


Up (+) : Push the lever forwardonce to shift up one gear.

Down (-) : Pull the lever backwardsonce to shift down onegear.

• In sports mode, the driver mustexecute upshifts in accordancewith road conditions, taking care tokeep the engine speed below thered zone.

• In sports mode, only the 6 forwardgears can be selected. To reverseor park the vehicle, move the shiftlever to the R (Reverse) or P (Park)position as required.

• In sports mode, downshifts aremade automatically when the vehi-cle slows down. When the vehiclestops, 1st gear is automaticallyselected.

• In sports mode, when the enginerpm approaches the red zone shiftpoints are varied to upshift auto-matically.

• To maintain the required levels ofvehicle performance and safety,the system may not execute cer-tain gearshifts when the shift leveris operated.

• When driving on a slippery road,push the shift lever forward into the+(up) position. This causes thetransaxle to shift into the 2nd gearwhich is better for smooth drivingon a slippery road. Push the shiftlever to the -(down) side to shiftback to the 1st gear.

Paddle shifter (if equipped)

The paddle shifter is available whenthe shift lever is in the D position orthe sport mode.

OYDDDR2111


205

With the shift lever in the D position The paddle shifter can operate whenthe vehicle speed is more than 6.2mph.Pull the [+] or [-] paddle shifter onceto shift up or down one gear and thesystem changes from automaticmode to manual mode.If the vehicle speed is lower than 6.2mph, if you depress the acceleratorpedal for more than 7 seconds or ifyou shift the shift lever from D tosports mode and shift it from sportsmode to D again, the system changefrom manual mode to automaticmode.

With the shift lever in the sports mode Pull the [+] or [-] paddle shifter onceto shift up or down one gear.

If you pull the [+] and [-] paddleshifters at the same time, you can'tshift the gear.

Shift lock system (if equipped)For your safety, the automatictransaxle has a shift lock systemwhich prevents shifting the transaxleout of P (Park) unless the brakepedal is depressed.To shift the transaxle from P (Park)into R (Reverse):1.Depress and hold the brake pedal.2.Start the engine or turn the ignition

switch to the ON position.3.Move the shift lever.If the brake pedal is repeatedlydepressed and released with theshift lever in the P (Park) position, achattering noise near the shift levermay be heard. This is a normal con-dition.

Shift-lock override(with smart key system)If the shift lever cannot be movedfrom the P (Park) position into the R(Reverse) position with the brakepedal depressed, continue depress-ing the brake, then do the following:1.Carefully remove the cap covering

the shift-lock access hole (1).2.Insert a key (or screwdriver) into

the access hole and press downon the key (or screwdriver).

3.Move the shift lever.4.Have your vehicle inspected by an

authorized Kia dealer immediately.

WARNING - Shiftingfrom park

Always fully depress the brakepedal before and while shiftingout of the P (Park) position intoanother position to avoid inad-vertent motion of the vehicle.

OYDEDR2104CN

5 21


Ignition key interlock system (if equipped)The ignition key cannot be removedunless the shift lever is in the P(Park) position.

Good driving practices• Never move the shift lever from P

(Park) or N (Neutral) to any otherposition with the accelerator pedaldepressed.

• Never move the shift lever into P(Park) when the vehicle is inmotion.

• Slow down before shifting to alower gear. Otherwise, the lowergear may not be engaged.

• Always use the parking brake. Donot depend on placing thetransaxle in P (Park) to keep thevehicle from moving.

• Optimum vehicle performance andeconomy is obtained by smoothlydepressing and releasing theaccelerator pedal.

Moving up a steep grade from astanding startTo move up a steep grade from astanding start, depress the brakepedal, shift the shift lever to D(Drive). Select the appropriate geardepending on load weight and steep-ness of the grade, and release theparking brake. Depress the accelera-tor gradually while releasing theservice brakes.


225

Power brakes Your vehicle has power-assistedbrakes that adjust automaticallythrough normal usage.In the event that the power-assistedbrakes lose power because of astalled engine or some other reason,you can still stop your vehicle byapplying greater force to the brakepedal than you normally would. Thestopping distance, however, will belonger.When the engine is not running, thereserve brake power is partiallydepleted each time the brake pedalis applied. Do not pump the brakepedal when the power assist hasbeen interrupted.Pump the brake pedal only whennecessary to maintain steering con-trol on slippery surfaces.

Wet brakes may impair the vehicle’sability to safely slow down; the vehi-cle may also pull to one side whenthe brakes are applied. Applying thebrakes lightly will indicate whetherthey have been affected in this way.

To dry the brakes, apply them lightlywhile maintaining a safe forwardspeed until brake performancereturns to normal.

In the event of brake failure If service brakes fail to operate whilethe vehicle is in motion, you canmake an emergency stop with theparking brake. The stopping dis-tance, however, will be much greaterthan normal.

BRAKE SYSTEM

WARNING - Parkingbrake

Avoid applying the parkingbrake to stop the vehicle while itis moving except in an emer-gency situation. Applying theparking brake while the vehicleis moving at normal speeds cancause a sudden loss of controlof the vehicle. If you must usethe parking brake to stop thevehicle, use great caution inapplying the brake.

WARNING - Steep hillbraking

Avoid continuous application ofthe brakes when descending along or steep hill by shifting to alower gear. Continuous brakeapplication will cause thebrakes to overheat and couldresult in a temporary loss ofbraking performance.

CAUTION - Brake pedalDo not drive with your foot rest-ing on the brake pedal. This willcreate abnormally high braketemperatures which can causeexcessive brake lining and padwear.

5 23


Disc brakes wear indicator When your brake pads are worn andnew pads are required, you will heara high-pitched warning sound fromyour front brakes or rear brakes (ifequipped). You may hear this soundcome and go or it may occur when-ever you depress the brake pedal.Please remember that some drivingconditions or climates may cause abrake squeal when you first apply (orlightly apply) the brakes. This is nor-mal and does not indicate a problemwith your brakes.

Always replace the front or rearbrake pads as pairs.

Parking brake Applying the parking brake

To engage the parking brake, firstapply the foot brake and then withoutpressing the release button in, pullthe parking brake lever up as far aspossible. In addition it is recommend-ed that when parking the vehicle ona gradient, the shift lever should bepositioned in the appropriate lowgear for manual transaxle vehicles orin the P (Park) position for automatictransaxle vehicles.

CAUTION - Replacebrake pads

Do not continue to drive withworn brake pads. Continuing todrive with worn brake pads candamage the braking system andresult in costly brake repairs.

WARNING - Brake wearDo not ignore high pitched wearsounds from your brakes. If youignore this audible warning, youwill eventually lose braking per-formance, which could lead to aserious accident.

OYDDDR2105


245

Releasing the parking brake

To release the parking brake, firstapply the foot brake and pull up theparking brake lever slightly.Secondly, press the release button(1) and lower the parking brake lever(2) while holding the button.

CAUTION - Parkingbrake

Driving with the parking brakeapplied will cause excessivebrake pad (or lining) and brakerotor wear.

OYDDDR2106

WARNING - Parkingbrake use

All vehicles should always havethe parking brake fully engagedwhen parking to avoid inadver-tent movement of the vehiclewhich can injure occupants orpedestrians.

5 25


Check the brake warning light byturning the ignition switch ON (do notstart the engine). This light will illumi-nate when the parking brake isapplied with the ignition switch in theSTART or ON position.Before driving, be sure the parkingbrake is fully released and the brakewarning light is off.If the brake warning light remains onafter the parking brake is releasedwhile the engine is running, theremay be a malfunction in the brakesystem. Immediate attention is nec-essary.

If at all possible, stop driving thevehicle immediately. If that is not pos-sible, use extreme caution whileoperating the vehicle and only con-tinue to drive the vehicle until youcan reach a safe location or repairshop.

Anti-lock brake system (ABS)ABS (or ESC) will not prevent acci-dents due to improper or dangerousdriving maneuvers. Even thoughvehicle control is improved duringemergency braking, always maintaina safe distance between you andobjects ahead. Vehicle speedsshould always be reduced duringextreme road conditions.The vehicle should be driven atreduced speeds in the following cir-cumstances:• When driving on rough, gravel or

snow-covered roads• When driving on roads where the

road surface is pitted or has differ-ent surface heights.

Driving in these conditions increasesthe stopping distance for your vehi-cle.

W-75


265

The ABS continuously senses thespeed of the wheels. If the wheelsare going to lock, the ABS systemrepeatedly modulates the hydraulicbrake pressure to the wheels.When you apply your brakes underconditions which may lock thewheels, you may hear a “tik-tik’’sound from the brakes, or feel a cor-responding sensation in the brakepedal. This is normal and it meansyour ABS is active.In order to obtain the maximum ben-efit from your ABS in an emergencysituation, do not attempt to modulateyour brake pressure and do not try topump your brakes. Press your brakepedal as hard as possible or as hardas the situation allows the ABS tocontrol the force being delivered tothe brakes.

✽✽ NOTICEA click sound may be heard in theengine compartment when the vehi-cle begins to move after the engine isstarted. These conditions are normaland indicate that the anti-lock brakesystem is functioning properly.

• Even with the anti-lock brake sys-tem, your vehicle still requires suf-ficient stopping distance. Alwaysmaintain a safe distance from thevehicle in front of you.

• Always slow down when cornering.The anti-lock brake system cannotprevent accidents resulting fromexcessive speeds.

• On loose or uneven road surfaces,operation of the anti-lock brakesystem may result in a longer stop-ping distance than for vehiclesequipped with a conventionalbrake system.

The ABS warning light will stay on forapproximately 3 seconds after theignition switch is ON. During thattime, the ABS will go through self-diagnosis and the light will go off ifeverything is normal. If the light stayson, you may have a problem withyour ABS but your regular brakes willwork normally. Contact an authorizedKia dealer as soon as possible.

W-78

5 27


• When you drive on a road withpoor traction, such as an icy road,and operated your brakes continu-ously, the ABS will be active con-tinuously and the ABS warninglight may illuminate. Pull your vehi-cle over to a safe place and stopthe engine.

• Restart the engine. If the ABSwarning light is off, then your ABSis normal. Otherwise, you mayhave a problem with the ABS.Contact an authorized Kia dealeras soon as possible.

✽✽ NOTICEWhen you jump start your vehiclebecause of a drained battery, theengine may not run as smoothly andthe ABS warning light may turn onat the same time. This happensbecause of the low battery voltage. Itdoes not mean your ABS has mal-functioned.• Do not pump your brakes!• Have the battery recharged before

driving the vehicle.

Electronic stability control(ESC)

The Electronic Stability control(ESC) system is designed to stabi-lize the vehicle during corneringmaneuvers. ESC checks where youare steering and where the vehicle isactually going. ESC applies thebrakes on individual wheels andintervenes with the engine manage-ment system to stabilize the vehicle.

Electronic stability control (ESC) willnot prevent accidents. Excessivespeed in turns, abrupt maneuversand hydroplaning on wet surfacescan still result in serious accidents.Only a safe and attentive driver canprevent accidents by avoidingmaneuvers that cause the vehicle tolose traction. Even with ESCinstalled, always follow all the normalprecautions for driving - includingdriving at safe speeds for the condi-tions.The Electronic Stability Control(ESC) system is an electronic sys-tem designed to help the driver main-tain vehicle control under adverseconditions. It is not a substitute forsafe driving practices. Factors includ-ing speed, road conditions and driv-er steering input can all affectwhether ESC will be effective in pre-venting a loss of control. It is still yourresponsibility to drive and corner atreasonable speeds and to leave asufficient margin of safety.

OYDDDR2107


285

When you apply your brakes underconditions which may lock thewheels, you may hear a “tik-tik’’sound from the brakes, or feel a cor-responding sensation in the brakepedal. This is normal and it meansyour ESC is active.

ESC operationESC ON condition

• When the ignition is turnedON, ESC and ESC OFFindicator lights illuminatefor approximately 3 sec-onds, then ESC is turnedon.

• Press the ESC OFF but-ton for at least half a sec-ond after turning the igni-tion ON to turn ESC off.(ESC OFF indicator willilluminate). To turn theESC on, press the ESCOFF button (ESC OFFindicator light will go off).

• When starting the engine,you may hear a slight tick-ing sound. This is the ESCperforming an automaticsystem self-check anddoes not indicate a prob-lem.

When operatingWhen the ESC is in opera-tion, ESC indicator lightblinks.• When the Electronic

Stability Control is operat-ing properly, you can feel aslight pulsation in the vehi-cle. This is only the effectof brake control and indi-cates nothing unusual.

• When moving out of themud or slippery road,pressing the acceleratorpedal may not cause theengine rpm (revolutionsper minute) to increase.

-

5 29


ESC operation offESC OFF state

This car has 2 kinds of ESCoff states.If the engine stops whenESC is off, ESC remains off.Upon restarting the engine,the ESC will automaticallyturn on again.

• ESC off state 1To cancel ESC operation,press the ESC OFF button(ESC OFF ) shortly (ESCOFF indicator light (ESCOFF ) illuminates). At thisstate, the engine controlfunction does not operate. Itmeans the traction controlfunction does not operate.Brake control function onlyoperates.

• ESC off state 2To cancel ESC operation,press the ESC OFF button(ESC OFF ) for more than 3seconds. ESC OFF indicatorlight (ESC OFF ) illuminatesand ESC OFF warning chimewill sound. At this state, theengine control function andbrake control function do notoperate. It means the car sta-bility control function does notoperate any more.

Indicator light

When the ignition switch is turnedON, the indicator light illuminates,then goes off if ESC system is oper-ating normally.The ESC indicator light blinks when-ever ESC is operating.The ESC indicator light blinks when-ever ESC is operating or illuminateswhen ESC fails to operate.The ESC OFF indicator light comeson when the ESC is turned off withthe button.

■ ESC indicator light

■ ESC OFF indicator light


305

Driving with varying tire or wheelsizes may cause the ESC system tomalfunction. When replacing tires,make sure they are the same size asyour original tires.

ESC OFF usageWhen driving• It’s a good idea to keep the ESC

turned on for daily driving whenev-er possible.

• To turn ESC off while driving, pressthe ESC OFF button while drivingon a flat road surface.

Never press the ESC OFF buttonwhile ESC is operating (ESC indica-tor light blinks).If ESC is turned off while ESC isoperating, the vehicle may slip out ofcontrol.

WARNING - OperatingESC

Never press the ESC OFF but-ton while ESC is operating.If the ESC is turned off whileESC is operating, the vehiclemay go out of control.

WARNING - Electronicstabilitycontrol

Drive carefully even thoughyour vehicle has ElectronicStability Control. It can onlyassist you in maintaining con-trol under certain circum-stances.

5 31


Hill-start assist control (HAC)Hill start Assist Control is a comfortfunction. The main intent is to pre-vent the vehicle from rolling back-wards while driving uphill on aninclined surface. HAC holds the brak-ing pressure builtup by driver duringstopping procedure for 2 secondsafter releasing brake pedal.During the pressure-hold period, thedriver has enough time to press theaccelerator pedal to drive off.The braking pressure is reduced assoon as the system detects the dri-ver’s intention to drive off.

• The HAC does not operate whenthe transaxle shift lever is in the P(Park) or N (Neutral) position.

• The HAC activates even thoughthe ESP is off but it does not acti-vate when the ESP has malfunc-tioned.

Vehicle stability management(VSM)This system provides furtherenhancements to vehicle stabilityand steering responses when a vehi-cle is driving on a slippery road or avehicle detected changes in coeffi-cient of friction between right wheelsand left wheels when braking.

VSM operationWhen the VSM is in operation, ESCindicator light ( ) blinks.When the vehicle stability manage-ment is operating properly, you canfeel a slight pulsation in the vehicleand/or abnormal steering responses(EPS). This is only the effect of brakeand EPS control and indicates noth-ing unusual.

WARNING - ActivatingHAC

Drivers should pay close atten-tion when activating the HAC.The vehicle may roll backwardcausing an accident due toinsufficient brake hold pres-sure.


325

The VSM does not operate when:• Driving on bank roads such as gra-

dient or incline• Driving rearward• ESC OFF indicator light ( )

remains on the instrumentcluster

• EPS indicator light remains on theinstrument cluster

VSM operation offIf you press the ESC OFF button toturn off the ESC, the VSM will alsocancel and the ESC OFF indicatorlight ( ) illuminates.To turn on the VSM, press the buttonagain. The ESC OFF indicator lightgoes out.

Malfunction indicatorThe VSM can be deactivated even ifyou don’t cancel the VSM operationby pressing the ESC OFF button. Itindicates that a malfunction hasbeen detected somewhere in theElectric Power Steering system orVSM system. If the ESC indicatorlight ( ) or EPS warning lightremains on, take your vehicle to anauthorized Kia dealer and have thesystem checked.• The VSM is designed to function

above approximately 9 mph (15km/h) on curves.

• The VSM is designed to functionabove approximately 18 mph (30km/h) when a vehicle is braking ona split-mu road. The split-mu roadis made of surfaces which have dif-ferent friction forces.

• The Vehicle Stability Managementsystem is not a substitute for safedriving practices but a supplemen-tary function only. It is the respon-sibility of the driver to always checkthe speed and the distance to thevehicle ahead. Always hold thesteering wheel firmly while driving.

• Your vehicle is designed to activateaccording to the driver’s intention,even with installed VSM. Alwaysfollow all the normal precautionsfor driving at safe speeds for theconditions – including driving ininclement weather and on a slip-pery road.

5 33


Good braking practices• Check to be sure the parking brake

is not engaged and that the park-ing brake indicator light is outbefore driving away.

• Driving through water may get thebrakes wet. They can also get wetwhen the vehicle is washed. Wetbrakes can be dangerous! Yourvehicle will not stop as quickly if thebrakes are wet. Wet brakes maycause the vehicle to pull to oneside.To dry the brakes, apply the brakeslightly until the braking actionreturns to normal, taking care tokeep the vehicle under control atall times. If the braking action doesnot return to normal, stop as soonas it is safe to do so and call anauthorized Kia dealer for assis-tance.

• Don't coast down hills with thevehicle out of gear.This is extreme-ly hazardous. Keep the vehicle ingear at all times, use the brakes toslow down, then shift to a lowergear so that engine braking willhelp you maintain a safe speed.

• Don't "ride" the brake pedal.Resting your foot on the brakepedal while driving can be danger-ous because the brakes mightoverheat and lose their effective-ness. It also increases the wear ofthe brake components.

• If a tire goes flat while you are driv-ing, apply the brakes gently andkeep the vehicle pointed straightahead while you slow down. Whenyou are moving slowly enough for itto be safe to do so, pull off the roadand stop in a safe place.

• If your vehicle is equipped with anautomatic transaxle, don't let yourvehicle creep forward. To avoidcreeping forward, keep your footfirmly on the brake pedal when thevehicle is stopped.

WARNING - Tire/Wheelsize

When replacing tires andwheels, make sure they are thesame size as the original tiresand wheels installed. Drivingwith varying tire or wheel sizesmay diminish any supplementalsafety benefits of the VSM sys-tem.


345

• Be cautious when parking on a hill.Firmly engage the parking brakeand place the shift lever in P (auto-matic transaxle) or in first orreverse gear (manual transaxle). Ifyour vehicle is facing downhill, turnthe front wheels into the curb tohelp keep the vehicle from rolling. Ifyour vehicle is facing uphill, turnthe front wheels away from thecurb to help keep the vehicle fromrolling. If there is no curb or if it isrequired by other conditions tokeep the vehicle from rolling, blockthe wheels.

• Under some conditions your park-ing brake can freeze in theengaged position. This is most like-ly to happen when there is anaccumulation of snow or icearound or near the rear brakes or ifthe brakes are wet. If there is a riskthat the parking brake may freeze,apply it only temporarily while youput the shift lever in P (automatictransaxle) or in first or reverse gear(manual transaxle) and block therear wheels so the vehicle cannotroll. Then release the parkingbrake.

• Do not hold the vehicle on theupgrade with the acceleratorpedal.This can cause the transaxleto overheat. Always use the brakepedal or parking brake.

5 35


The cruise control system allows youto program the vehicle to maintain aconstant speed without depressingthe accelerator pedal.This system is designed to functionabove approximately 40 km/h (25mph).If the cruise control is left on,(CRUISE indicator light in the instru-ment cluster illuminated) the cruisecontrol can be switched on acciden-tally. Keep the cruise control systemoff (CRUISE indicator light OFF)when the cruise control is not in use,to avoid inadvertently setting aspeed.Use the cruise control system onlywhen traveling on open highways ingood weather.Do not use the cruise control whendriving in heavy or varying traffic, oron slippery (rainy, icy or snow-cov-ered) or winding roads or over 6%up-hill or down-hill roads.

✽✽ NOTICE• During normal cruise control

operation, when the SET switch isactivated or reactivated afterapplying the brakes, the cruisecontrol will energize after approx-imately 3 seconds. This delay isnormal.

• To activate cruise control, depressthe brake pedal at least once afterturning the ignition switch to theON position or starting the engine.This is to check if the brake switchwhich is important part to cancelcruise control is in normal condi-tion.

Cruise control switch

CRUISE : Turns cruise control sys-tem on or off.

CANCEL: Cancels cruise controloperation.

RES+: Resumes or increases cruisecontrol speed.

SET-: Sets or decreases cruise con-trol speed.

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING - Misuse ofCruise Control or CruiseControl Misuse

Do not use cruise control if thetraffic situation does not allowyou to drive safely at a constantspeed and with sufficient dis-tance to the vehicle in front.

OYDDDR3027


365

To set cruise control speed:

1.Press the CRUISE button on thesteering wheel to turn the systemon. The CRUISE indicator light inthe instrument cluster will illumi-nate.

2.Accelerate to the desired speed,which must be more than 30 km/h(20 mph).

✽✽ NOTICE - Manual transaxleFor manual transaxle vehicles, youshould depress the brake pedal atleast once to set the cruise controlafter starting the engine.

3.Move the lever down (to SET-), andrelease it at the desired speed. TheSET indicator light in the instru-ment cluster will illuminate.Release the accelerator pedal atthe same time. The desired speedwill automatically be maintained.

On a steep grade, the vehicle mayslow down or speed up slightly whilegoing uphill or downhill.

OYDEDR3022

OYDDDR3023

5 37


To increase cruise control setspeed:

Follow either of these procedures:• Move the lever up (to RES+) and

hold it. Your vehicle will accelerate.Release the lever at the speed youwant.

• Move the lever up (to RES+) andrelease it immediately.The cruising speed will increase by2 km/h (or 1 mph) each time youmove the lever up (to RES+) in thismanner.

To decrease the cruisingspeed:

Follow either of these procedures:• Move the lever down (to SET-) and

hold it. Your vehicle will graduallyslow down. Release the lever at thespeed you want to maintain.

• Move the lever down (to SET-) andrelease it immediately.The cruising speed will decreaseby 2 km/h (or 1 mph) each time youmove the lever down (to SET-) inthis manner.

To temporarily accelerate withthe cruise control on:If you want to speed up temporarilywhen the cruise control is on,depress the accelerator pedal.Increased speed will not interferewith cruise control operation orchange the set speed.To return to the set speed, take yourfoot off the accelerator pedal.

OYDDDR3023OYDDDR3024


385

To cancel cruise control, doone of the following:

• Depress the brake pedal.• Depress the clutch pedal with a

manual transaxle.• Shift into N (Neutral) with an auto-

matic transaxle.• Press the CANCEL button.• Decrease the vehicle speed lower

than the memory speed by 15km/h (9 mph).

• Decrease the vehicle speed to lessthan approximately 40 km/h (25mph).

Each of these actions will cancelcruise control operation (the SETindicator light in the instrument clus-ter will go off), but it will not turn thesystem off. If you wish to resumecruise control operation, move up thelever (to RES+) located on yoursteering wheel.You will return to yourpreviously preset speed.

To resume cruising speed atmore than approximately 40km/h (25 mph):

If any method other than theCRUISE button was used to cancelcruising speed and the system is stillactivated, the most recent set speedwill automatically resume when youmove the lever up (to RES+).It will not resume, however, if thevehicle speed has dropped belowapproximately 40 km/h (25 mph).

OYDDDR3025

OYDDDR3024

5 39


✽✽ NOTICEAlways check the road conditionswhen you move the lever up (toRES+) to resume the speed.

To turn cruise control off, doone of the following:

• Press the CRUISE button (theCRUISE indicator light in theinstrument cluster will go off).

• Turn the ignition off.Both of these actions cancel cruisecontrol operation. If you want toresume cruise control operation,repeat the steps provided in “To setcruise control speed” on the previouspage.

OYDDDR3022


405

ACTIVE ECO SYSTEM (IF EQUIPPED)Active ECO operation

Active ECO helps improve fuel effi-ciency by controlling the engine andtransaxle. But fuel-efficiency can beaffected by the driver's driving habitsand road conditions.• When the Active ECO button is

pressed the ECO indicator (green)will illuminate to show that theActive ECO is operating.

• When the Active ECO is activated,it does not turn off even though theengine is restarted again. To turnoff the system, press the activeECO button again.

• If Active ECO is turned off, it willreturn to the normal mode.

Limitation of Active ECO oper-ation:If the following conditions occur whileActive ECO is operating, the systemoperation is limited even thoughthere is no change in the ECO indi-cator.• When the coolant temperature is

low:The system will be limited untilengine performance becomes nor-mal.

• When driving up a hill:The system will be limited to gainpower when driving uphill becausethe engine torque is restricted.

• When using sports mode:The system will be limited accord-ing to the shift location.

• When the accelerator pedal is fullypressed for a few seconds:The system will be limited,as it hasdetermined that the driver hasaccelerated judging that the driverwants to speed up.

OYDNDR3020

5 41


Your vehicle's fuel economy dependsmainly on your style of driving, whereyou drive and when you drive.Each of these factors affects howmany miles (kilometers) you can getfrom a gallon (liter) of fuel.To operateyour vehicle as economically as pos-sible, use the following driving sug-gestions to help save money in bothfuel and repairs:• Drive smoothly. Accelerate at a

moderate rate. Don't make "jack-rabbit" starts or full-throttle shiftsand maintain a steady cruisingspeed. Don't race between stop-lights. Try to adjust your speed tothe traffic so you don't have tochange speeds unnecessarily.Avoid heavy traffic whenever pos-sible. Always maintain a safe dis-tance from other vehicles so youcan avoid unnecessary braking.This also reduces brake wear.

• Drive at a moderate speed. Thefaster you drive, the more fuel yourvehicle uses. Driving at a moderatespeed, especially on the highway,is one of the most effective ways toreduce fuel consumption.

• Don't "ride" the brake pedal. Thiscan increase fuel consumption andalso increase wear on these com-ponents. In addition, driving withyour foot resting on the brake pedalmay cause the brakes to overheat,which reduces their effectivenessand may lead to more serious con-sequences.

• Take care of your tires. Keep theminflated to the recommended pres-sure. Incorrect inflation, either toomuch or too little, results in unnec-essary tire wear. Check the tirepressures at least once a month.

• Be sure that the wheels arealigned correctly. Improper align-ment can result from hitting curbsor driving too fast over irregularsurfaces. Poor alignment causesfaster tire wear and may also resultin other problems as well asgreater fuel consumption.

• Keep your vehicle in good condi-tion. For better fuel economy andreduced maintenance costs, main-tain your vehicle in accordancewith the maintenance schedule insection 7. If you drive your vehiclein severe conditions, more frequentmaintenance is required (see sec-tion 7 for details).

• Keep your vehicle clean. For maxi-mum service, your vehicle shouldbe kept clean and free of corrosivematerials. It is especially importantthat mud, dirt, ice, etc. not beallowed to accumulate on theunderside of the vehicle. This extraweight can result in increased fuelconsumption and also contribute tocorrosion.

• Travel lightly. Don't carry unneces-sary weight in your vehicle. Weightreduces fuel economy.

• Don't let the engine idle longerthan necessary. If you are waiting(and not in traffic), turn off yourengine and restart only whenyou're ready to go.

ECONOMICAL OPERATION


425

• Remember, your vehicle does notrequire extended warm-up. Afterthe engine has started, allow theengine to run for 10 to 20 secondsprior to placing the vehicle in gear.In very cold weather, however, giveyour engine a slightly longer warm-up period.

• Don't "lug" or "over-rev" the engine.Lugging is driving too slowly in avery high gear resulting in enginebucking. If this happens, shift to alower gear. Over-revving is racingthe engine beyond its safe limit.This can be avoided by shifting atthe recommended speed.

• Use your air conditioning sparingly.The air conditioning system isoperated by engine power so yourfuel economy is reduced when youuse it.

• Open windows at high speeds canreduce fuel economy.

• Fuel economy is reduced by cross-winds and headwinds. To help off-set some of this loss, slow downwhen driving in these conditions.

Keeping a vehicle in good operatingcondition is important both for econ-omy and safety. Therefore, have anauthorized Kia dealer performscheduled inspections and mainte-nance.

WARNING - Engine offduringmotion

Never turn the engine off tocoast down hills or anytime thevehicle is in motion. The powersteering and power brakes willnot function properly withoutthe engine running. In addition,turning off the ignition whiledriving could engage the steer-ing wheel lock resulting in lossof vehicle steering. Keep theengine on and downshift to anappropriate gear for enginebraking effect.

5 43


Hazardous driving conditions When hazardous driving conditionsare encountered such as water,snow, ice, mud, sand, or similar haz-ards, follow these suggestions:• Drive cautiously and allow extra

distance for braking.• Avoid sudden braking or steering.• When braking with non-ABS

brakes pump the brake pedal witha light up-and-down motion untilthe vehicle is stopped.

Do not pump the brake pedal on avehicle equipped with ABS.• If stalled in snow, mud, or sand,

use second gear. Accelerate slow-ly to avoid spinning the drivewheels.

• Use sand, rock salt, or other non-slip material under the drivewheels to provide traction whenstalled in ice, snow, or mud.

Rocking the vehicle If it is necessary to rock the vehicleto free it from snow, sand, or mud,first turn the steering wheel right andleft to clear the area around yourfront wheels. Then, shift back andforth between 1st (First) and R(Reverse) in vehicles equipped witha manual transaxle or R (Reverse)and any forward gear in vehiclesequipped with an automatictransaxle. Do not race the engine,and spin the wheels as little as pos-sible. If you are still stuck after a fewtries, have the vehicle pulled out by atow vehicle to avoid engine overheat-ing and possible damage to thetransaxle.The ESC system should be turnedOFF prior to rocking the vehicle.

SPECIAL DRIVING CONDITIONS

WARNING -Downshifting

Do not downshift with an auto-matic transaxle while driving onslippery surfaces. The suddenchange in tire speed couldcause the tires to skid andresult in an accident.

CAUTION - Vehicle rocking

Prolonged rocking may causeengine overheating, transaxledamage or failure, and tire dam-age.


445

Smooth cornering

Avoid braking or gear changing incorners, especially when roads arewet. Ideally, corners should alwaysbe taken under gentle acceleration. Ifyou follow these suggestions, tirewear will be held to a minimum.

Driving at night

Because night driving presents morehazards than driving in the daylight,here are some important tips toremember:• Slow down and keep more dis-

tance between you and other vehi-cles, as it may be more difficult tosee at night, especially in areaswhere there may not be any streetlights.

OBH058035L OMC035004WARNING - Sudden vehicle movement

Do not attempt to rock the vehi-cle if people or objects are near-by. The vehicle may suddenlymove forward or backwards asit becomes unstuck.

CAUTION - Spinningtires

Do not spin the wheels, espe-cially at speeds more than 56km/h (35 mph). Spinning thewheels at high speeds when thevehicle is stationary couldcause a tire to overheat whichcould result in tire damage.

5 45


• Adjust your mirrors to reduce theglare from other driver's head-lights.

• Keep your headlights clean andproperly aimed on vehicles notequipped with the automatic head-light aiming feature. Dirty orimproperly aimed headlights willmake it much more difficult to seeat night.

• Avoid staring directly at the head-lights of oncoming vehicles. Youcould be temporarily blinded, and itwill take several seconds for youreyes to readjust to the darkness.

Driving in the rain

Rain and wet roads can make drivingdangerous, especially if you’re notprepared for the slick pavement.Here are a few things to considerwhen driving in the rain:• A heavy rainfall will make it harder

to see and will increase the dis-tance needed to stop your vehicle,so slow down.

• Keep your windshield wipingequipment in good shape. Replaceyour windshield wiper blades whenthey show signs of streaking ormissing areas on the windshield.

• If your tires are not in good condi-tion, making a quick stop on wetpavement can cause a skid andpossibly lead to an accident. Besure your tires are in good shape.

• Turn on your headlights to make iteasier for others to see you.

• Driving too fast through large pud-dles can affect your brakes. If youmust go through puddles, try todrive through them slowly.

• If you believe you may have gottenyour brakes wet, apply them lightlywhile driving until normal brakingoperation returns.

Driving in flooded areas Avoid driving through flooded areasunless you are sure the water is nohigher than the bottom of the wheelhub. Drive through any water slowly.Allow adequate stopping distancebecause brake performance may beaffected.After driving through water, dry thebrakes by gently applying them sev-eral times while the vehicle is movingslowly.

1JBB3303


465

Driving off-roadDrive carefully off-road because yourvehicle may be damaged by rocks orroots of trees. Become familiar withthe off-road conditions where youare going to drive before you begindriving.

Highway drivingTires Adjust the tire inflation pressures tospecification. Low tire inflation pres-sures will result in overheating andpossible failure of the tires.Avoid using worn or damaged tireswhich may result in reduced tractionor tire failure.Never exceed the maximum tireinflation pressure shown on the tires.

Fuel, engine coolant and engineoilHigh speed travel consumes morefuel than urban motoring. Do not for-get to check both the engine coolantand engine oil.

Drive beltA loose or damaged drive belt mayoverheat the engine.

WARNING - Tire treadAlways check the tire treadbefore driving your vehicle.Worn-out tires can result in lossof vehicle control. Worn-outtires should be replaced assoon as possible. For furtherinformation and tread limits,refer to "Tires and wheels" insection 7.

5 47


Severe weather conditions in thewinter result in greater wear andother problems. To minimize theproblems of winter driving, youshould follow these suggestions:

Snowy or Icy conditionsTo drive your vehicle in deep snow, itmay be necessary to use snow tireson your tires. If snow tires are need-ed, it is necessary to select tiresequivalent in size and type of theoriginal equipment tires. Failure to doso may adversely affect the safetyand handling of your car.Furthermore, speeding, rapid accel-eration, sudden brake applications,and sharp turns are potentially veryhazardous practices.During deceleration, use enginebraking to the fullest extent. Suddenbrake applications on snowy or icyroads may cause skids. You need tokeep sufficient distance between thevehicle in operation in front and yourvehicle. Also, apply the brake gently.

Snow tiresIf you mount snow tires on your vehi-cle, make sure they are radial tires ofthe same size and load range as theoriginal tires. Mount snow tires on allfour wheels to balance your vehicle’shandling in all weather conditions.Keep in mind that the traction provid-ed by snow tires on dry roads maynot be as high as your vehicle's orig-inal equipment tires.You should drivecautiously even when the roads areclear. Check with the tire dealer formaximum speed recommendations.Do not install studded tires withoutfirst checking local, state and munic-ipal regulations for possible restric-tions against their use.

WINTER DRIVING

1JBB3305


485

Use high quality ethylene gly-col coolantYour vehicle is delivered with highquality ethylene glycol coolant in thecooling system. It is the only type ofcoolant that should be used becauseit helps prevent corrosion in the cool-ing system, lubricates the waterpump and prevents freezing. Be sureto replace or replenish your coolantin accordance with the maintenanceschedule in section 7. Before winter,have your coolant tested to assurethat its freezing point is sufficient forthe temperatures anticipated duringthe winter.

Check battery and cablesWinter puts additional burdens onthe battery system. Visually inspectthe battery and cables as describedin section 7. The level of charge inyour battery can be checked by anauthorized Kia dealer or a servicestation.

Change to "winter weight" oilif necessaryIn some climates it is recommendedthat a lower viscosity "winter weight"oil be used during cold weather. Seesection 8 for recommendations. Ifyou aren't sure what weight oil youshould use, consult an authorizedKia dealer.

Check spark plugs and igni-tion systemInspect your spark plugs asdescribed in section 7 and replacethem if necessary. Also check allignition wiring and components to besure they are not cracked, worn ordamaged in any way.

To keep locks from freezingTo keep the locks from freezing,squirt an approved de-icer fluid orglycerine into the key opening. If alock is covered with ice, squirt it withan approved de-icing fluid to removethe ice. If the lock is frozen internally,you may be able to thaw it out byusing a heated key. Handle the heat-ed key with care to avoid injury.

Use approved window washeranti-freeze in systemTo keep the water in the windowwasher system from freezing, add anapproved window washer anti-freezesolution in accordance with instruc-tions on the container. Window wash-er anti-freeze is available from anauthorized Kia dealer and most autoparts outlets. Do not use enginecoolant or other types of anti-freezeas these may damage the paint fin-ish.

5 49


Don't let your parking brakefreezeUnder some conditions your parkingbrake can freeze in the engagedposition. This is most likely to hap-pen when there is an accumulationof snow or ice around or near therear brakes or if the brakes are wet.If there is a risk the parking brakemay freeze, apply it only temporarilywhile you put the shift lever in P(automatic transaxle) or in first orreverse gear (manual transaxle) andblock the rear wheels so the vehiclecannot roll. Then release the parkingbrake.

Don't let ice and snow accu-mulate underneathUnder some conditions, snow andice can build up under the fendersand interfere with the steering. Whendriving in severe winter conditionswhere this may happen, you shouldperiodically check underneath thecar to be sure the movement of thefront wheels and the steering com-ponents is not obstructed.

Carry emergency equipmentDepending on the severity of theweather you should carry appropri-ate emergency equipment. Some ofthe items you may want to carryinclude tow straps or chains, flash-light, emergency flares, sand, ashovel, jumper cables, a windowscraper, gloves, ground cloth, cover-alls, a blanket, etc.

TRAILER TOWINGWe do not recommend using thisvehicle for trailer towing.


505

Tire and loading informationlabelThe label located on the driver's doorsill gives the original tire size, coldtire pressures recommended for yourvehicle, the number of people thatcan be in your vehicle and vehiclecapacity weight.

Vehicle capacity weight:385 kg (849 lbs.)

Vehicle capacity weight is the maxi-mum combined weight of occupantsand cargo. If your vehicle is equippedwith a trailer, the combined weightincludes the tongue load.

VEHICLE LOAD LIMIT

OYDNEM2010

OYDNEM2011

OYDNEM2012

OYDNEM2010C

OYDNEM2011C

OYDNEM2012C

5 51


Seating capacity:Total : 5 persons

(Front seat : 2 persons, Rear seat : 3 persons)

Seating capacity is the maximumnumber of occupants including adriver, your vehicle may carry.However, the seating capacity maybe reduced based upon the weight ofall of the occupants, and the weightof the cargo being carried or towed.Do not overload the vehicle as thereis a limit to the total weight, or loadlimit including occupants and cargo,the vehicle can carry.

Towing capacity:We do not recommend using thisvehicle for trailer towing.

Cargo capacity:The cargo capacity of your vehiclewill increase or decrease dependingon the weight and the number ofoccupants and the tongue load, ifyour vehicle is equipped with a trail-er.

Steps For Determining CorrectLoad Limit -1.Locate the statement "The com-

bined weight of occupants andcargo should never exceed XXX kgor XXX lbs.'' on your vehicle's plac-ard.

2.Determine the combined weight ofthe driver and passengers that willbe riding in your vehicle.

3.Subtract the combined weight ofthe driver and passengers fromXXX kg or XXX lbs.

4. The resulting figure equals theavailable amount of cargo and lug-gage load capacity. For example, ifthe "XXX" amount equals 635 kg(1400 lbs.) and there will be five 68kg (150 lbs.) passengers in yourvehicle, the amount of availablecargo and luggage load capacityis 295 kg (650 lbs).(635-340 (5 x 68) = 295 kg or1400-750 (5 x 150) = 650 lbs.)

5.Determine the combined weight ofluggage and cargo being loadedon the vehicle. That weight may notsafely exceed the available cargoand luggage load capacity calcu-lated in Step 4.

6.If your vehicle will be towing a trail-er, load from your trailer will betransferred to your vehicle. Consultthis manual to determine how thisreduces the available cargo andluggage load capacity of your vehi-cle.


525

C190F03JM

A B C

Example 3

C190F02JM

A B C

Example 2

C190F01JM

Example 1

A B C

Refer to your vehicle’s tire and loading information label for specific information about your vehicle's capacity weightand seating positions. The combined weight of the driver, passengers and cargo should never exceed your vehicle'scapacity weight.

Item Description Total

AVehicle Capacity

Weight385 kg

(849 lbs)

BSubtract Occupant

Weight 68 kg (150 lbs) × 2

136 kg(300 lbs)

CAvailable Cargo and

Luggage weight249 kg

(549 lbs)


AVehicle Capacity

Weight385 kg

(849 lbs)

BSubtract Occupant


365 kg(805 lbs)


Luggage weight20 kg

(44 lbs)


AVehicle Capacity

Weight385 kg

(849 lbs)

BSubtract Occupant


340 kg(750 lbs)


Luggage weight45 kg

(99 lbs)

5 53


Certification labelThe certification label is located onthe driver's door sill at the center pil-lar.This label shows the maximumallowable weight of the fully loadedvehicle. This is called the GVWR(Gross Vehicle Weight Rating). TheGVWR includes the weight of thevehicle, all occupants, fuel andcargo.This label also tells you the maxi-mum weight that can be supportedby the front and rear axles, calledGross Axle Weight Rating (GAWR).

To find out the actual loads on yourfront and rear axles, you need to goto a weigh station and weigh yourvehicle.Your dealer can help you withthis. Be sure to spread out your loadequally on both sides of the center-line.

The label will help you decide howmuch cargo and installed equipmentyour vehicle can carry.

If you carry items inside your vehicle- like suitcases, tools, packages, oranything else - they are moving asfast as the vehicle. If you have to stopor turn quickly, or if there is a crash,the items will keep going and cancause an injury if they strike the driv-er or a passenger.

WARNING - Over loading

Never exceed the GVWR foryour vehicle, the GAWR foreither the front or rear axle andvehicle capacity weight.Exceeding these ratings canaffect your vehicle’s handlingand braking ability.


545

✽✽ NOTICEOverloading your vehicle may causedamage. Repairs would not be cov-ered by your warranty. Do not over-load your vehicle.

WARNING - Over loading

Do not overload your vehicle.Overloading your vehicle cancause heat buildup in your vehi-cle's tires and possible tire fail-ure, increased stopping dis-tances and poor vehicle han-dling--all of which may result ina crash.

WARNING - Loose cargoDo not travel with unsecuredblunt objects in the passengercompartment of your vehicle(e.g. suit cases or unsecuredchild seats). These items maystrike occupant during a sud-den stop or crash.

5 55


This section will guide you in theproper loading of your vehicle and/ortrailer, to keep your loaded vehicleweight within its design rating capa-bility, with or without a trailer.Properly loading your vehicle willprovide maximum return of the vehi-cle design performance. Before load-ing your vehicle, familiarize yourselfwith the following terms for determin-ing your vehicle's weight ratings, withor without a trailer, from the vehicle'sspecifications and the compliancelabel:

Base curb weight This is the weight of the vehicleincluding a full tank of fuel and allstandard equipment. It does notinclude passengers, cargo, or option-al equipment.

Vehicle curb weightThis is the weight of your new vehiclewhen you picked it up from your deal-er plus any aftermarket equipment.

Cargo weightThis figure includes all weight addedto the Base Curb Weight, includingcargo and optional equipment.

GAW (Gross axle weight)This is the total weight placed oneach axle (front and rear) - includingvehicle curb weight and all payload.

GAWR (Gross axle weight rating)This is the maximum allowableweight that can be carried by a singleaxle (front or rear). These numbersare shown on the compliance label.The total load on each axle mustnever exceed its GAWR.

GVW (Gross vehicle weight)This is the Base Curb Weight plusactual Cargo Weight plus passen-gers.

GVWR (Gross vehicle weight rating)This is the maximum allowableweight of the fully loaded vehicle(including all options, equipment,passengers and cargo). The GVWRis shown on the certification labellocated on the driver’s door sill.

VEHICLE WEIGHT

What to do in an emergency

Road warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2• Hazard warning flasher . . . . . . . . . . . . . . . . . . . . . . . 6-2

In case of an emergency while driving. . . . . . . . . . 6-3• If the engine stalls at a crossroad or crossing. . . . . . . 6-3• If you have a flat tire while driving . . . . . . . . . . . . . . . 6-3• If engine stalls while driving . . . . . . . . . . . . . . . . . . . . 6-3

If the engine will not start . . . . . . . . . . . . . . . . . . . . 6-4• If engine doesn't turn over or turns over slowly . . . . 6-4• If engine turns over normally but does not start . . . . 6-4

Emergency starting . . . . . . . . . . . . . . . . . . . . . . . . . 6-5• Jump starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5• Push-starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6• If the engine overheats . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

If you have a flat tire (with tire mobility kit) . . . . 6-8• Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8• Notes on the safe use of the Tire Mobility Kit . . . . . . 6-9• Components of the TireMobilityKit . . . . . . . . . . . . . 6-10• Using the Tire Mobility Kit . . . . . . . . . . . . . . . . . . . . 6-11

If you have a flat tire (with spare tire) . . . . . . . . . 6-14• Jack and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14• Removing and storing the spare tire . . . . . . . . . . . . 6-15• Changing tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22• Towing service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22• Removable towing hook . . . . . . . . . . . . . . . . . . . . . . . 6-23• Emergency towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23

6


26

ROAD WARNING Hazard warning flasher

The hazard warning flasher servesas a warning to other drivers to exer-cise extreme caution whenapproaching, overtaking, or passingyour vehicle.

It should be used whenever emer-gency repairs are being made orwhen the vehicle is stopped near theedge of a roadway.Depress the flasher switch with theignition switch in any position. Theflasher switch is located in the centerconsole switch panel. All turn signallights will flash simultaneously.

• The hazard warning flasher oper-ates whether your vehicle is run-ning or not.

• The turn signals do not work whenthe hazard flasher is on.

• Care must be taken when usingthe hazard warning flasher whilethe vehicle is being towed.

OYDEEM2001CN

6 3


In an emergency situation while thevehicle is in motion, you are able toturn the engine off and to the ACCposition by pressing the ENGINESTART/STOP button for more than 2seconds or 3 times successivelywithin 3 seconds. If the vehicle is stillmoving, you can restart the enginewithout depressing the brake pedalby pressing the ENGINESTART/STOP button with the shiftlever in the N (Neutral) position(if smart key equipped).

If the engine stalls at a cross-road or crossingIf the engine stalls at a crossroad orcrossing, set the shift lever in the N(Neutral) position and then push thevehicle to a safe place.

If you have a flat tire whiledrivingIf a tire goes flat while you are driv-ing:1.Take your foot off the accelerator

pedal and let the vehicle slowdown while driving straight ahead.Do not apply the brakes immedi-ately or attempt to pull off the roadas this may cause a loss of control.When the vehicle has slowed downto such a speed that it is safe to doso, brake carefully and pull off theroad. Drive off the road as far aspossible and park on a firm levelground. If you are on a dividedhighway, do not park in the medianarea between the two traffic lanes.

2.When the vehicle is stopped, turnon your emergency hazard flash-ers, set the parking brake and putthe transaxle in P (automatictransaxle) or reverse (manualtransaxle).

3.Have all passengers get out of thevehicle. Be sure they all get out onthe side of the vehicle that is awayfrom traffic.

4.When changing a flat tire, followthe instruction provided later in thissection.

If engine stalls while driving1.Reduce your speed gradually,

keeping a straight line. Move cau-tiously off the road to a safe place.

2.Turn on your emergency flashers.3.Try to start the engine again. If your

vehicle will not start, contact anauthorized Kia dealer or seek otherqualified assistance.

IN CASE OF AN EMERGENCY WHILE DRIVING


46

IF THE ENGINE WILL NOT STARTIf the engine doesn't turn overor turns over slowly1.If your vehicle has an automatic

transaxle, be sure the shift lever isin N (Neutral) or P (Park) and theemergency brake is set.

2.Check the battery connections tobe sure they are clean and tight.

3.Turn on the interior light. If the lightdims or goes out when you operatethe starter, the battery is dis-charged.

4.Check the starter connections tobe sure they are securely tight-ened.

5.Do not push or pull the vehicle tostart it. See instructions for "Jumpstarting".

If engine turns over normallybut does not start1.Check fuel level.2.With the ignition switch in the

LOCK position, check all connec-tors at the ignition coil and sparkplugs. Reconnect any that may bedisconnected or loose.

3.Check the fuel line in the enginecompartment.

4.If the engine still does not start, callan authorized Kia dealer or seekother qualified assistance.

WARNING - Push/pull start

Do not push or pull the vehicleto start it. Push or pull startingmay cause the catalytic con-verter to overload and create afire hazard.

6 5


EMERGENCY STARTING

Connect cables in numerical orderand disconnect in reverse order.

Jump starting Jump starting can be dangerous ifdone incorrectly. Therefore, to avoidharm to yourself or damage to yourvehicle or battery, follow these jumpstarting procedures. If in doubt, westrongly recommend that you have acompetent technician or towing serv-ice jump start your vehicle.

CAUTION - 12 volt battery

Use only a 12-volt jumper sys-tem. You can damage a 12-voltstarting motor, ignition system,and other electrical partsbeyond repair by use of a 24-volt power supply (either two12-volt batteries in series or a24-volt motor generator set).

WARNING - BatteryKeep all flames or sparks awayfrom the battery. The batteryproduces hydrogen gas whichwill explode if exposed to flameor sparks.

WARNING - BatteryNever attempt to check the elec-trolyte level of the battery asthis may cause the battery torupture or explode.

WARNING - Frozen batteries

Do not attempt to jump start thevehicle if the discharged batteryis frozen or if the electrolytelevel is low as the battery mayrupture or explode.

WARNING - Sulfuricacid risk

When jump starting your vehi-cle be careful not to get acid onyourself, your clothing or on thevehicle. Automobile batteriescontain sulfuric acid. This ispoisonous and highly corro-sive.

1VQA4001

Discharged battery

Jumper Cables

Booster battery

(-)

(+)

(+)(-)


66

WARNING - Tow startingvehicle

Never tow a vehicle to start itbecause the sudden surge for-ward when the engine startscould cause a collision with thetow vehicle.

Jump starting procedure1.Make sure the booster battery is

12-volt and that its negative termi-nal is grounded.

2.If the booster battery is in anothervehicle, do not allow the vehicles totouch.

3.Turn off all unnecessary electricalloads.

4.Connect the jumper cables in theexact sequence shown in the illus-tration. First connect one end of ajumper cable to the positive termi-nal of the discharged battery (1),then connect the other end to thepositive terminal on the boosterbattery (2).Proceed to connect one end of theother jumper cable to the negativeterminal of the booster battery (3),then the other end to a solid, sta-tionary, metallic point (for example,the engine lifting bracket) awayfrom the battery (4). Do not con-nect it to or near any part thatmoves when the engine is cranked.

Do not allow the jumper cables tocontact anything except the correctbattery terminals or the correctground. Do not lean over the bat-tery when making connections.

5.Start the engine of the vehicle withthe booster battery and let it run at2,000 rpm, then start the engine ofthe vehicle with the dischargedbattery.

If the cause of your battery discharg-ing is not apparent, you should haveyour vehicle checked by an author-ized Kia dealer.

Push-starting Your manual transaxle-equippedvehicle should not be push-startedbecause it might damage the emis-sion control system.Vehicles equipped with automatictransaxle cannot be push-started.Follow the directions in this sectionfor jump-starting.

CAUTION - Batterycables

Do not connect the jumpercable from the negative terminalof the booster battery to thenegative terminal of the dis-charged battery. This can causethe discharged battery to over-heat and crack, releasing bat-tery acid.

6 7


IF THE ENGINE OVERHEATSIf your temperature gauge indicatesoverheating, you will experience aloss of power, or hear loud pinging orknocking, the engine is probably toohot. If this happens, you should:

1.Pull off the road and stop as soonas it is safe to do so.

2.Place the shift lever in P (automat-ic transaxle) or neutral (manualtransaxle) and set the parkingbrake. If the air conditioning is on,turn it off.

3.If engine coolant is running outunder the vehicle or steam is com-ing out from underneath the hood,stop the engine. Do not open thehood until the coolant has stoppedrunning or the steaming hasstopped. If there is no visible lossof engine coolant and no steam,leave the engine running andcheck to be sure the engine cool-ing fan is operating. If the fan is notrunning, turn the engine off.

4.Check to see if the water pumpdrive belt is missing. If it is notmissing, check to see that it istight. If the drive belt seems to besatisfactory, check for coolant leak-ing from the radiator, hoses orunder the vehicle. (If the air condi-tioning had been in use, it is nor-mal for cold water to be drainingfrom it when you stop).

5.If the water pump drive belt is bro-ken or engine coolant leaks, stopthe engine immediately and callthe nearest authorized Kia dealerfor assistance.

6.If you cannot find the cause of theoverheating, wait until the enginetemperature has returned to nor-mal. Then, if coolant has been lost,carefully add coolant to the reser-voir to bring the fluid level in thereservoir up to the halfway mark.

7.Proceed with caution, keepingalert for further signs of overheat-ing. If overheating happens again,call an authorized Kia dealer forassistance.

Serious loss of coolant indicatesthere is a leak in the cooling systemand this should be checked as soonas possible by an authorized Kiadealer.

WARNING - Under thehood

While the engine is running,keep hair, hands and clothingaway from moving parts suchas the fan and drive belts.

WARNING - Radiatorcap

Do not remove the radiator capwhen the engine is hot.This canallow coolant to be blown out ofthe opening and cause seriousburns.


86

IF YOU HAVE A FLAT TIRE (WITH TIRE MOBILITY KIT, IF EQUIPPED)

For safe operation, carefully readand follow the instructions in thismanual before use.(1) Compressor(2) Sealant bottleThe Tire Mobility Kit is a temporaryfix to the tire and the tire should beinspected by an authorized Kia deal-er as soon as possible.

Introduction

With the Tire Mobility Kit you staymobile even after experiencing a tirepuncture.The system of compressor and seal-ing compound effectively and com-fortably seals most punctures in apassenger car tire caused by nailsor similar objects and reinflates thetire.After you ensured that the tire isproperly sealed you can drive cau-tiously on the tire (up to 200 km (120miles)) at a max. speed of 80 km/h(50 mph) in order to reach a servicestation or tire dealer to have the tirerepaired or replaced.

OEL069019

OYDNEM2013

CAUTION - One sealantbottle for onetire

The Tire Mobility Kit sealingcompound in the bottle is to beused for one tire only. See yourKia dealership for additionalreplacement sealant bottles.

WARNING - Tire wallDo not use the Tire Mobility Kitto repair punctures in the tirewalls. This can result in an acci-dent due to tire failure.

WARNING - Temporaryfix

Have your tire repaired as soonas possible. The tire may looseair pressure at any time afterinflating with the Tire MobilityKit.

6 9


It is possible that some tires, espe-cially with larger punctures or dam-age to the sidewall, cannot be sealedcompletely.Air pressure loss in the tire mayadversely affect tire performance.For this reason, you should avoidabrupt steering or other drivingmaneuvers, especially if the vehicleis heavily loaded or if a trailer is inuse.The Tire Mobility Kit is not designedor intended as a permanent tirerepair method and is to be used forone tire only.This instruction shows you step bystep procedure to temporarily sealthe puncture.Read the section "Notes on the safeuse of the Tire Mobility Kit".

Notes on the safe use of theTire Mobility Kit• Park your car at the side of the

road so that you can work with theTire Mobility Kit away from movingtraffic.

• To be sure your vehicle will notmove, even when you're on fairlylevel ground, always set your park-ing brake.

• Only use the Tire Mobility Kit forsealing/inflation passenger cartires. Only punctured areas locatedwithin the tread region of the tirecan be sealed using the tire mobil-ity kit.

• Do not use on motorcycles, bicy-cles or any other type of tires.

• When the tire and wheel are dam-aged, do not use Tire Mobility Kitfor your safety.

• Use of the Tire Mobility Kit may notbe effective for tire damage largerthan approximately 6 mm (0.24 in).Please contact the nearest Kiadealership if the tire cannot bemade roadworthy with the TireMobility Kit.

• Do not use the Tire Mobility Kit if atire is severely damaged by drivingrun flat or with insufficient air pres-sure.

• Do not remove any foreign objectssuch as nails or screws that havepenetrated the tire.

• Provided the car is outdoors, leavethe engine running. Otherwiseoperating the compressor mayeventually drain the car battery.

• Never leave the Tire Mobility Kitunattended while it is being used.

• Do not leave the compressor run-ning for more than 10 min. at a timeor it may overheat.

• Do not use the Tire Mobility Kit ifthe ambient temperature is below --30°C (22°F).


106

0. Speed restriction label1. Sealant bottle and label with

speed restriction2. Filling hose from sealant bottle to

wheel3. Connectors and cable for the

power outlet direct connection

4. Holder for the sealant bottle5. Compressor6. On/off switch7. Pressure gauge for displaying the

tire inflation pressure8. Button for reducing tire inflation

pressure

9. Hose to connect compressor andsealant bottle or compressor andwheel

Connectors, cable and connectionhose are stored in the compressorhousing.

Strictly follow the specifiedsequence, otherwise the sealantmay escape under high pressure.

Components of the TireMobilityKit

OEL069020

WARNING - Expiredsealant

Do not use the Tire sealant afterexpiration date noted on thesealant bottle.This can increasethe risk of tire failure.

WARNING - Sealant• Keep out of reach of children.• Avoid contact with eyes.• Do not swallow.

6 11


Using the Tire Mobility Kit1.Detach the speed restriction label

(0) from the sealant bottle (1), andplace it in a highly visible placeinside the vehicle such as on thesteering wheel to remind the drivernot to drive too fast.

2.Screw connection hose (9) ontothe connector of the sealant bottle.

3.Ensure that button (8) on the com-pressor is not pressed.

4.Unscrew the valve cap from thevalve of the defective wheel andscrew filling hose (2) of the sealantbottle onto the valve.

5.Insert the sealant bottle into thehousing of the compressor (4)sothat the bottle is upright.

✽✽ NOTICEIf a foreign object is seen that haspunctured the tire, do not remove itbefore using Tire Mobility Kit.

6.Ensure that the compressor isswitched off, position 0.

7.Connect between compressor andthe vehicle power outlet using thecable and connectors.

8.With the engine start/stop buttonposition on or ignition switch posi-tion on, switch on the compressorand let it run for approximately 5~7minutes to fill the sealant up toproper pressure. (refer to the Tireand Wheels, chapter 8). The infla-tion pressure of the tire after fillingis unimportant and will bechecked/corrected later.Be careful not to overinflate the tireand stay away from the tire whenfilling it.

9.Switch off the compressor.10. Detach the hoses from the

sealant bottle connector andfrom the tire valve.

Return the Tire Mobility Kit to its stor-age location in the vehicle.

OEL069019

CAUTION - Tire pressureDo not attempt to drive yourvehicle if the tire pressure isbelow 200kpa (29 PSI). Thiscould result in an accident dueto sudden tire failure.

WARNINGCarbon monoxide poisoningand suffocation is possible ifthe engine is left running in apoorly ventilanted or unventilat-ed location (such as inside abuilding).


126

Distributing the sealant11. Immediately drive approximately

7~10km (4~6miles or, about10min) to evenly distribute thesealant in the tire.

Do not exceed a speed of 80 km/h(50 mph). If possible, do not fallbelow a speed of 20 km/h (12 mph).While driving, if you experience anyunusual vibration, ride disturbance ornoise, reduce your speed and drivewith caution until you can safely pulloff of the side of the road.Call for road side service or towing.When you use the Tire Mobility Kit,the tire pressure sensor valve stemand wheel may be stained bysealant. After use wipe off sealantresidue and inspect. Consult you Kiadealership if necessary.

Checking the tire inflationpressure1.After driving approximately 7 ~ 10

km (4 ~ 6 miles or about 10 min),stop at a safe location.

2.Connect connection hose (9) of thecompressor directly to the tirevalve.

3.Plug the compressor power cordinto the vehicle power outlet.

4.Adjust the tire inflation pressure tothe recomended tire inflation.With the ignition switch on, pro-ceed as follows.- To increase the inflation pres-

sure : Switch on the compressor,position I. To check the currentinflation pressure setting, brieflyswitch off the compressor.

✽✽ NOTICEThe pressure gauge may show high-er than actual reading when thecompressor is running. To get anaccurate tire reading, the compres-sor needs to be turned off.

- To reduce the inflation pres-sure: Press the button 8 on thecompressor.

6 13


Technical DataSystem voltage : DC 12 VWorking voltage : DC 10 - 15 VAmperage rating : max. 15 ASuitable for use at temperatures :

-30 ~ +70°C (-22 ~ +158°F)Max. working pressure :

6 bar (87 psi)Size Compressor : 168 x 150 x 68 mm

(6.6 x 5.9 x 2.7 in.)Sealant bottle : 104 x ø 85 mm

(4.1 x ø 3.3 in.)Compressor weight :

1.05 kg (2.31 lbs)Sealant volume :

300 ml (18.3 cu. in.)Sealant warranty :

5 years (sealant.)

CAUTION - Tire pressuresensor

When you use the Tire MobilityKit including sealant notapproved by Kia, the tire pres-sure sensors may be damagedby sealant. The sealant on thetire pressure sensor and wheelshould be removed when youreplace the tire with a new oneand inspect the tire pressuresensors at an authorized dealer.


146

IF YOU HAVE A FLAT TIRE(IF EQUIPPED)Jack and tools

The spare tire, jack, jack handle andwheel lug nut wrench are stored inthe luggage compartment.Remove the luggage under tray outof the way to reach the equipment.(1) Jack handle(2) Jack(3) Wheel lug nut wrench

Jacking instructions The jack is provided for emergencytire changing only.To prevent the jack from “rattling”while the vehicle is in motion, store itproperly.Follow jacking instructions to reducethe possibility of personal injury.

Always move the vehicle completelyoff the road and onto the shoulderbefore trying to change a tire. Thejack should be used on firm levelground. If you cannot find a firm levelplace off the road, call a towing serv-ice company for assistance.Be sure to use the correct front andrear jacking positions on the vehicle;never use the bumpers or any otherpart of the vehicle for jack support.

WARNING - Tire JackDo not place any portion of yourbody under a vehicle that isonly supported by a jack sincethe vehicle can easily roll off thejack. Use vehicle supportstands.

WARNING - Changingtires

Never attempt vehicle repairs inthe traffic lanes of a public roador highway.

OTF060002

6 15


Do not allow anyone to remain in thevehicle while it is on the jack.Make sure any children present arein a secure place away from the roadand from the vehicle to be raised withthe jack.

Removing and storing thespare tire

Turn the tire hold-down wing boltcounterclockwise.Store the tire in the reverse order ofremoval.To prevent the spare tire and toolsfrom “rattling” while the vehicle is inmotion, store them properly.

Changing tires

1.Park on a level surface and applythe parking brake firmly.

2.Shift the shift lever into R(Reverse) for manual transaxle orP (Park) for automatic transaxle.

3.Activate the hazard warning flash-ers.

OED066033

WARNING - Runningvehicle onjack

Do not start or run the engine ofthe vehicle while the vehicle ison the jack as this may causethe vehicle to fall off the jack. ONF068004


166

4.Remove the wheel lug nut wrench,jack, jack handle, and spare tirefrom the vehicle.

5.Block both the front and rear of thewheel that is diagonally oppositethe jack position.

To prevent vehicle movement whilechanging a tire, always set the park-ing brake fully, and always block thewheel diagonally opposite the wheelbeing changed.We recommend that the wheels ofthe vehicle be chocked, and that noperson remain in a vehicle that isbeing jacked.

6.Loosen the wheel lug nuts counter-clockwise one turn each, but donot remove any nut until the tirehas been raised off the ground.

1JBA6504 OYDDEM2004

6 17


7.Place the jack at the front or rearjacking position closest to the tireyou are changing. Place the jack atthe designated locations under theframe. The jacking positions areplates welded to the frame with twotabs and a raised dot to index withthe jack.

8.Insert the jack handle into the jackand turn it clockwise, raising thevehicle until the tire just clears theground. This measurement isapproximately 30 mm (1 in). Beforeremoving the wheel lug nuts, makesure the vehicle is stable and thatthere is no chance for movementor slippage.

9.Loosen the wheel nuts and removethem with your fingers. Slide thewheel off the studs and lay it flat soit cannot roll away. To put thewheel on the hub, pick up thespare tire, line up the holes withthe studs and slide the wheel ontothem. If this is difficult, tip the wheelslightly and get the top hole in thewheel lined up with the top stud.Then jiggle the wheel back andforth until the wheel can be slidover the other studs.

OMDC063020 OYDDEM2005


186

Wheels and wheel covers may havesharp edges. Handle them carefullyto avoid possible injury. Before put-ting the wheel into place, be surethat there is nothing on the hub orwheel (such as mud, tar, gravel, etc.)that prevents the wheel from fittingsolidly against the hub.

10. To install the wheel, hold it on thestuds, put the wheel nuts on thestuds and tighten them fingertight. Jiggle the tire to be sure it iscompletely seated, then tightenthe nuts as much as possiblewith your fingers again.

11. Lower the vehicle to the groundby turning the wheel nut wrenchcounterclockwise.

Then position the wrench as shownin the drawing and tighten the wheelnuts. Be sure the socket is seatedcompletely over the nut. Do not standon the wrench handle or use anextension pipe over the wrench han-dle.Go around the wheel tighteningevery nut following the numericalsequence shown in the image untilthey are tight. Then double-checkeach nut for tightness. After changingthe wheels, have an authorized Kiadealer tighten the wheel nuts to theirproper torque as soon as possible.Wheel nut tightening torque:Steel wheel & aluminium alloy wheel:9~11 kg.m (65~79 lb.ft)

WARNING - Installing awheel

Make sure the wheel makesgood contact with the hub wheninstalled. If the contact of themounting surface between thewheel and hub is not good, thewheel nuts could come looseand cause the loss of a wheel.Loss of a wheel may result inloss of control of the vehicle.

OTF060007

6 19


If you have a tire gauge, remove thevalve cap and check the air pressure.If the pressure is lower than recom-mended, drive slowly to the nearestservice station and inflate to the cor-rect pressure. If it is too high, adjustit until it is correct. Always reinstallthe valve cap after checking oradjusting the tire pressure. If the capis not replaced, air may leak from thetire. If you lose a valve cap, buyanother and install it as soon as pos-sible.After you have changed wheels,always secure the flat tire in its placeand return the jack and tools to theirproper storage locations.

Note that most lug nuts do not havemetric threads. Be sure to useextreme care in checking for threadstyle before installing aftermarket lugnuts or wheels. If in doubt, consult anauthorized Kia dealer.

To prevent the jack, jack handle,wheel lug nut wrench and spare tirefrom rattling while the vehicle is inmotion, store them properly.Check the inflation pressures assoon as possible after installing thespare tire. Adjust it to the specifiedpressure, if necessary. Refer to“Tires and wheels” in section 8.

CAUTION - Replacinglug nuts

Make certain during wheelremoval that the same nuts thatwere removed are reinstalled -or, if replaced, that nuts withmetric threads and the samechamfer configuration are used.Your vehicle has metric threadson the wheel studs and nuts.Installation of a non-metricthread nut on a metric stud willnot secure the wheel to the hubproperly and will damage thestud so that it must be replaced.

WARNING - Wheel studsDo not drive your vehicle withdamaged wheel studs. If thestuds are damaged, they maylose their ability to retain thewheel. This could lead to theloss of the wheel and a colli-sion.


206

Important - use of compact sparetire (if equipped)Your vehicle is equipped with a com-pact spare tire. This compact sparetire takes up less space than a regu-lar-size tire. This tire is smaller than aconventional tire and is designed fortemporary use only.You should drive carefully when thecompact spare is in use. The com-pact spare should be replaced by theproper conventional tire and rim atthe first opportunity.The operation of this vehicle is notrecommended with more than onecompact spare tire in use at thesame time.

The compact spare should be inflat-ed to 420 kPa (60 psi).Check the inflation pressure afterinstalling the spare tire. Adjust it tothe specified pressure, as necessary.

When using a compact spare tire,observe the following precautions:• Under no circumstances should

you exceed 80 km/h (50 mph); ahigher speed could damage thetire.

• Ensure that you drive slowlyenough for the road conditions toavoid all hazards. Any road hazard,such as a pothole or debris, couldseriously damage the compactspare.

• Any continuous road use of this tirecould result in tire failure, loss ofvehicle control, and possible per-sonal injury.

• Do not exceed the vehicle’s maxi-mum load rating or the load-carry-ing capacity shown on the sidewallof the compact spare tire.

• Avoid driving over obstacles. Thecompact spare tire diameter issmaller than the diameter of a con-ventional tire and reduces theground clearance approximately 25 mm (1 inch), which could resultin damage to the vehicle.

WARNING - Spare tireDo not operate your vehicle onthis compact spare at speedsover 80 km/h (50 mph). Thecompact spare tire is for emer-gency use only. The original tireshould be repaired or replacedas soon as possible to avoidfailure of the spare.

6 21


• Do not take this vehicle through anautomatic car wash while the com-pact spare tire is installed.

• The compact spare tire should notbe installed on the front axle if thevehicle must be driven in snow oron ice.

• Do not use the compact spare tireon any other vehicle because thistire has been designed especiallyfor your vehicle.

• The compact spare tire’s tread lifeis shorter than a regular tire.Inspect your compact spare tireregularly and replace worn com-pact spare tires with the same sizeand design, mounted on the samewheel.

• The compact spare tire should notbe used on any other wheels, norshould standard tires, snow tires,wheel covers or trim rings be usedwith the compact spare wheel. Ifsuch use is attempted, damage tothese items or other car compo-nents may occur.

• Do not use more than one compactspare tire at a time.

• Do not tow a trailer while the com-pact spare tire is installed.


226

TOWINGTowing service

If emergency towing is necessary,we recommend having it done by anauthorized Kia dealer or a commer-cial tow-truck service. Proper liftingand towing procedures are neces-sary to prevent damage to the vehi-cle. The use of wheel dollies orflatbed is recommended.

It is acceptable to tow the vehiclewith the rear wheels on the ground(without dollies) and the front wheelsoff the ground.If any of the loaded wheels or sus-pension components are damagedor the vehicle is being towed with thefront wheels on the ground, use atowing dolly under the front wheels.When being towed by a commercialtow truck and wheel dollies are notused, the front of the vehicle shouldalways be lifted, not the rear.

CAUTION - Towing• Do not tow the vehicle back-

wards with the front wheels onthe ground as this may causedamage to the vehicle.

• Do not tow with sling-typeequipment. Use wheel lift orflatbed equipment.

OMC045012

A

B

dolly

HXD02

HXD03

6 23


When towing your vehicle in anemergency without wheel dollies :1.Set the ignition switch in the ACC

position.2.Place the transaxle shift lever in N

(Neutral).3.Release the parking brake.

Removable towing hook (front) (if equipped)

1.Remove the towing hook from thetool case.

2.Remove the hole cover pressingthe lower part of the cover on thefront bumper.

3.Install the towing hook by turning itclockwise into the hole until it isfully secured.

4.Remove the towing hook andinstall the cover after use.

Emergency towing

If towing is necessary, we recom-mend you have it done by anauthorized Kia dealer or a com-mercial tow truck service.

CAUTION - Towing gear position

Always place the transaxle shiftlever in N (Neutral) when towingyour vehicle. Failure to place thetransaxle shift lever in N(Neutral) may cause internaldamage to the transaxle.

OYDDEM2006

OYDDEM2008

Front

RearOYDDEM2007


246

If towing service is not available in anemergency, your vehicle may betemporarily towed using a cable orchain secured to the emergency tow-ing hook under the front (or rear) ofthe vehicle. Use extreme cautionwhen towing the vehicle. A drivermust be in the vehicle to steer it andoperate the brakes.Towing in this manner may be doneonly on hard-surfaced roads for ashort distance and at low speeds.Also, the wheels, axles, power train,steering and brakes must all be ingood condition.• Do not use the towing hooks to pull

a vehicle out of mud, sand or otherconditions from which the vehiclecannot be driven out under its ownpower.

• Avoid towing a vehicle heavier thanthe vehicle doing the towing.

• The drivers of both vehicles shouldcommunicate with each other fre-quently.

• Attach a towing strap to the towinghook.

• Using a portion of the vehicle otherthan the tow hooks for towing maydamage the body of your vehicle.

• Use only a cable or chain specifi-cally intended for use in towingvehicles. Securely fasten the cableor chain to the towing hook provid-ed.

• Before emergency towing, checkthat the hook is not broken or dam-aged.

• Fasten the towing cable or chainsecurely to the hook.

• Do not jerk the hook. Apply itsteadily with even force.

• To avoid damaging the hook, donot pull from the side or at a verti-cal angle. Always pull straightahead.

• Use a towing strap less than 5 m(16 feet) long. Attach a white or redcloth (about 30 cm (12 inches)wide) in the middle of the strap foreasy visibility.

• Drive carefully so that the towingstrap is not loosened during tow-ing.

OYF062017

6 25


Emergency towing precautions• Turn the ignition switch to ACC so

the steering wheel isn’t locked.• Place the transaxle shift lever in N

(Neutral).• Release the parking brake.• Press the brake pedal with more

force than normal since you willhave reduced brake performance.

• More steering effort will berequired because the power steer-ing system will be disabled.

• If you are driving down a long hill,the brakes may overheat and brakeperformance will be reduced. Stopoften and let the brakes cool off.

If the car is being towed with all fourwheels on the ground, it can betowed only from the front. Be surethat the transmission is in neutral. Besure the steering is unlocked by plac-ing the ignition switch in the ACCposition. A driver must be in thetowed vehicle to operate the steeringand brakes.

CAUTION - Automatictransaxle

• To avoid serious damage tothe automatic transmission,limit the vehicle speed to 15km/h (10 mph) and drive lessthan 1.5 km (1 mile) when tow-ing.

• Before towing, check for anautomatic transmission fluidleak under your vehicle. If theautomatic transmission fluidis leaking, a flatbed equipmentor towing dolly must be used.

Maintenance

Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . 7-3Maintenance services . . . . . . . . . . . . . . . . . . . . . . . . 7-4

• Owner’s responsibility . . . . . . . . . . . . . . . . . . . . . . . . . 7-4• Owner maintenance precautions . . . . . . . . . . . . . . . . 7-5

Owner maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 7-6• Owner maintenance schedule. . . . . . . . . . . . . . . . . . . . 7-6

Scheduled maintenance service. . . . . . . . . . . . . . . . 7-8• Normal maintenance schedule . . . . . . . . . . . . . . . . . . 7-10• Maintenance under severe usage conditions. . . . . . . 7-23

Explanation of scheduled maintenance items . . . 7-25Engine oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-29

• Checking the engine oil level . . . . . . . . . . . . . . . . . . . 7-29• Changing the engine oil and filter . . . . . . . . . . . . . . . 7-30

Engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31• Checking the coolant level . . . . . . . . . . . . . . . . . . . . . 7-31• Changing the coolant . . . . . . . . . . . . . . . . . . . . . . . . . 7-33

Brake/clutch fluid. . . . . . . . . . . . . . . . . . . . . . . . . . 7-34• Checking the brake/clutch fluid level . . . . . . . . . . . . 7-34

Washer fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35• Checking the washer fluid level . . . . . . . . . . . . . . . . 7-35

Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35• Checking the parking brake . . . . . . . . . . . . . . . . . . . 7-35

Air cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36• Filter replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36

Climate control air filter . . . . . . . . . . . . . . . . . . . . 7-37• Filter inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37

Wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38• Blade inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38• Blade replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-41• For best battery service . . . . . . . . . . . . . . . . . . . . . . . 7-41• Battery recharging . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-43• Reset items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-43

Tires and wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-44• Tire care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-44• Recommended cold tire inflation pressures . . . . . . . 7-44• Checking tire inflation pressure. . . . . . . . . . . . . . . . . 7-45• Tire rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-46• Wheel alignment and tire balance . . . . . . . . . . . . . . 7-47• Tire replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-48• Wheel replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49• Tire traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49• Tire maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49• Tire sidewall labeling . . . . . . . . . . . . . . . . . . . . . . . . . 7-49• All season tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55• Summer tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55• Snow tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55• Radial-ply tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56• Low aspect raito tire . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56

7

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58• Instrument panel fuse replacement . . . . . . . . . . . . . . 7-59• Engine compartment fuse replacement. . . . . . . . . . . 7-61• Fuse/relay panel description. . . . . . . . . . . . . . . . . . . . 7-63• Engine compartment fuse panel . . . . . . . . . . . . . . . . 7-64• Engine room (Battery terminal cover) . . . . . . . . . . . 7-65

Appearance care . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71• Exterior care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71• Interior care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-76

Emission control system . . . . . . . . . . . . . . . . . . . . 7-78• Crankcase emission control system . . . . . . . . . . . . . . 7-78• Evaporative emission control

(including ORVR: Onboard Refueling Vapor Recovery) system . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-78

• Exhaust emission control system . . . . . . . . . . . . . . . . 7-79

7

7 3

Maintenance

ENGINE COMPARTMENT

1. Engine oil filler cap

2. Engine oil dipstick

3. Brake/clutch fluid reservoir

4. Air cleaner

5. Fuse box

6. Positive battery terminal

7. Negative battery terminal

8. Windshield washer fluid reservoir

9. Radiator cap

10. Engine coolant reservoir

OYDNMC2041

* The actual engine room in the vehicle may differ from the illustration.

47

MAINTENANCE SERVICESYou should exercise the utmost careto prevent damage to your vehicleand injury to yourself whenever per-forming any maintenance or inspec-tion procedures.Should you have any doubts con-cerning the inspection or servicing ofyour vehicle, we strongly recom-mend that you have an authorizedKia dealer perform this work.An authorized Kia dealer has factory-trained technicians and genuine Kiaparts to service your vehicle proper-ly. For expert advice and quality serv-ice, see an authorized Kia dealer.Inadequate, incomplete or insuffi-cient servicing may result in opera-tional problems with your vehicle thatcould lead to vehicle damage, anaccident, or personal injury.

Owner’s responsibility

✽✽ NOTICEMaintenance Service and RecordRetention are the owner's responsi-bility. You should retain documents thatshow proper maintenance has beenperformed on your vehicle in accor-dance with the scheduled mainte-nance service charts shown on thefollowing pages. You need this infor-mation to establish your compliancewith the servicing and maintenancerequirements of your vehicle war-ranties.Detailed warranty information isprovided in your Warranty &Consumer Information manual.

Repairs and adjustments required asa result of improper maintenance ora lack of required maintenance arenot covered.We recommend you have your vehi-cle maintained and repaired by anauthorized Kia dealer. An authorizedKia dealer meets Kia’s high servicequality standards and receives tech-nical support from Kia in order to pro-vide you with a high level of servicesatisfaction.

Maintenance

7 5

Maintenance

Owner maintenance precau-tions Improper or incomplete service mayresult in problems. This section givesinstructions only for the maintenanceitems that are easy to perform.As explained earlier in this section,several procedures can be done onlyby an authorized Kia dealer with spe-cial tools.

✽✽ NOTICEImproper owner maintenance dur-ing the warranty period may affectwarranty coverage. For details, readthe separate Warranty & ConsumerInformation manual provided withthe vehicle. If you're unsure aboutany servicing or maintenance proce-dure, have it done by an authorizedKia dealer.

WARNING - Maintenancework

Do not wear jewelry or looseclothing while working underthe hood of your vehicle withthe engine running. These canbecome entangled in movingparts, if you must run theengine while working under thehood, make certain that youremove all jewelry (especiallyrings, bracelets, watches, andnecklaces) and all neckties,scarves, and similar looseclothing before getting near theengine or cooling fans.

Maintenance

67

OWNER MAINTENANCE The following lists are vehicle checksand inspections that should be per-formed by the owner or an author-ized Kia dealer at the frequenciesindicated to help ensure safe,dependable operation of your vehi-cle.Any adverse conditions should bebrought to the attention of your deal-er as soon as possible.These Owner Maintenance Checksare generally not covered by war-ranties and you may be charged forlabor, parts and lubricants used.

Owner maintenance schedule When you stop for fuel:• Check the engine oil level.• Check the coolant level in coolant

reservoir.• Check the windshield washer fluid

level.• Look for low or under-inflated tires.

While operating your vehicle:• Note any changes in the sound of

the exhaust or any smell ofexhaust fumes in the vehicle.

• Check for vibrations in the steeringwheel. Notice any increased steer-ing effort or looseness in the steer-ing wheel, or change in its straight-ahead position.

• Notice if your vehicle constantlyturns slightly or “pulls” to one sidewhen traveling on smooth, levelroad.

• When stopping, listen and checkfor unusual sounds, pulling to oneside, increased brake pedal travelor “hard-to-push” brake pedal.

• If any slipping or changes in theoperation of your transaxle occurs,check the transaxle fluid level.

• Check the automatic transaxle P(Park) function.

• Check the parking brake.• Check for fluid leaks under your

vehicle (water dripping from the airconditioning system during or afteruse is normal).

WARNING - Hot coolantBe careful when checking yourengine coolant level when theengine is hot. Scalding hotcoolant and steam may blowout under pressure.

7 7

Maintenance

At least monthly:• Check the coolant level in the

engine coolant reservoir.• Check the operation of all exterior

lights, including the stoplights, turnsignals and hazard warning flash-ers.

• Check the inflation pressures of alltires including the spare.

At least twice a year (i.e., every Spring and Fall) :• Check the radiator, heater and air

conditioning hoses for leaks ordamage.

• Check the windshield washerspray and wiper operation. Cleanthe wiper blades with clean clothdampened with washer fluid.

• Check the headlight alignment.• Check the muffler, exhaust pipes,

shields and clamps.• Check the lap/shoulder belts for

wear and function.• Check for worn tires and loose

wheel lug nuts.

At least once a year :• Clean the body and door drain

holes.• Lubricate the door hinges and

check the hood hinges.• Lubricate the door and hood locks

and latches.• Lubricate the door rubber weather-

strips.• Check the air conditioning system.• Check the power steering fluid

level.• Inspect and lubricate automatic

transaxle linkage and controls.• Clean the battery and terminals.• Check the brake/clutch fluid level.

Maintenance

87

SCHEDULED MAINTENANCE SERVICE Follow the Normal MaintenanceSchedule if the vehicle is usuallyoperated where none of the followingconditions apply. If any of the followingconditions apply, follow theMaintenance Under Severe UsageConditions.• Repeated short distance driving.• Driving in dusty conditions or

sandy areas.• Extensive use of brakes.• Driving in areas where salt or other

corrosive materials are being used.• Driving on rough or muddy roads.• Driving in mountainous areas.• Extended periods of idling or low

speed operation.• Driving for a prolonged period in

cold temperatures and/or extreme-ly humid climates.

• More than 50% driving in heavycity traffic during hot weatherabove 32°C (90°F).

If your vehicle is operated under theabove conditions, you shouldinspect, replace or refill more fre-quently than the following NormalMaintenance Schedule. After 120months or 240,000 km (150,000miles) continue to follow the pre-scribed maintenance intervals.

7 9

Maintenance

NORMAL MAINTENANCE SCHEDULEThe following maintenance services must be performed to ensure good emission control and performance.Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time are shown, thefrequency of service is determined by whichever occurs first.*1 : Fuel filter & Fuel tank air filter are considered to be maintenance free but periodic inspection is recommended for this mainte-

nance schedule depends on fuel quality. If there are some important safety matters like fuel flow restriction, surging, loss ofpower, hard starting problem etc, replace the fuel filter immediately regardless of maintenance schedule and consult an author-ized Kia dealer for details.

*2 : If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from yourauthorized Kia dealer along with information on how to use them. Do not mix other additives.

*3 : The drive belt should be replaced when cracks occur or tension is reduced excessively.

Maintenance

107

NORMAL MAINTENANCE SCHEDULE12,000 km (7,500 miles) or 6 months

❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect vacuum hose❑ Replace engine oil and filter

(12,000 km (7,500 miles) or 12 months)❑ Add fuel additive *2

(12,000 km (7,500 miles) or 12 months)❑ Inspect cooling system hoses and connections❑ Inspect brake pedal free play

24,000 km (15,000 miles) or 12 months

❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect vacuum hose❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect front brake disc/pads, calipers and rotors❑ Inspect steering gear box, linkage & boots/lower arm ball

joint, upper arm ball joint❑ Inspect suspension mounting bolts❑ Replace climate control air filter

(for evaporator and blower unit)❑ Inspect rear brake disc/pads, parking brake❑ Replace engine oil and filter


(12,000 km (7,500 miles) or 12 months)❑ Inspect cooling system hoses and connections❑ Inspect brake pedal free play❑ Inspect all latch, hinges and locks

❈ Inspect : Inspect and if necessary, adjust, correct, clean orreplace.


7 11

Maintenance

NORMAL MAINTENANCE SCHEDULE 36,000 km (22,500 miles) or 18 months





❑ Rotate tire❑ Inspect battery condition❑ Inspect vacuum hose❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect front brake disc/pads, calipers and rotors❑ Inspect steering gear box, linkage & boots/lower arm ball

joint, upper arm ball joint❑ Inspect suspension mounting bolts❑ Inspect brake/clutch (if equipped) fluid❑ Inspect fuel filter *1

❑ Inspect fuel lines, fuel hoses and connections❑ Inspect fuel tank air filter (if equipped) *1

❑ Inspect rear brake disc/pads, parking brake❑ Inspect vapor hose and fuel filler cap, fuel tank❑ Replace climate control air filter

(for evaporator and blower unit)❑ Replace air cleaner filter❑ Replace engine oil and filter

(48,000 km (30,000 miles) or 48 months)

(Continued)


Maintenance

127


❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect front brake disc/pads, calipers and rotors❑ Inspect steering gear box, linkage & boots/lower arm ball

joint, upper arm ball joint❑ Inspect suspension mounting bolts❑ Inspect vacuum hose❑ Replace climate control air filter






❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect vacuum hose❑ Inspect manual transaxle fluid (if equipped)❑ Replace engine oil and filter



NORMAL MAINTENANCE SCHEDULE(Continued)

❑ Add fuel additive *2




7 13

Maintenance







❑ Rotate tire❑ Inspect battery condition❑ Inspect vacuum hose❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive belts *3

(First, 96,000 km (60,000 miles) or 72 monthsafter every 24,000 km (15,000 miles) or 24 months)

❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect front brake disc/pads, calipers and rotors❑ Inspect steering gear box, linkage & boots/lower arm ball



❑ Inspect rear brake disc/pads, parking brake❑ Inspect vapor hose and fuel filler cap, fuel tank

(Continued)

Maintenance

147






NORMAL MAINTENANCE SCHEDULE (Continued)

❑ Replace climate control air filter (for evaporator and blower unit)

❑ Replace air cleaner filter❑ Replace engine oil and filter




7 15

Maintenance

NORMAL MAINTENANCE SCHEDULE 120,000 km (75,000 miles) or 60 months

❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive belts *3

(First, 96,000 km (60,000 miles) or 72 months after every 24,000 km (15,000 miles) or 24 months)


joint, upper arm ball joint❑ Inspect suspension mounting bolts❑ Inspect manual transaxle fluid (if equipped)❑ Inspect vacuum hose❑ Replace climate control air filter



(Continued)

(Continued)




Maintenance

167


❑ Rotate tire❑ Inspect battery condition❑ Inspect air conditioning refrigerant❑ Inspect brake hoses and lines❑ Inspect drive belts *3





❑ Inspect rear brake disc/pads, parking brake❑ Inspect vapor hose and fuel filler cap, fuel tank❑ Inspect vacuum hose❑ Replace climate control air filter

(for evaporator and blower unit)

(Continued)






7 17

Maintenance

NORMAL MAINTENANCE SCHEDULE(Continued)










Maintenance

187

(Continued)









(for evaporator and blower unit)❑ Inspect rear brake disc/pads, parking brake❑ Replace spark plugs (iridium coated) ❑ Replace engine oil and filter


(Continued)

NORMAL MAINTENANCE SCHEDULE

7 19

Maintenance




❑ Rotate tire❑ Inspect battery condition❑ Inspect air cleaner filter❑ Inspect manual transaxle fluild (if equipped)❑ Inspect vacuum hose❑ Replace engine oil and filter






❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect rear brake disc/pads, parking brake❑ Inspect steering gear box, linkage & boots/lower arm ball



❑ Inspect front brake disc/pads, calipers and rotors❑ Inspect vacuum hose❑ Inspect vapor hose and fuel filler cap, fuel tank❑ Replace climate control air filter

(for evaporator and blower unit)

(Continued)

Maintenance

207






(Continued)


(192,000 km (120,000 miles) or 192 months)❑ Replace coolant






7 21

Maintenance




❑ Inspect drive shafts and boots❑ Inspect exhaust pipe and muffler❑ Inspect rear brake disc/pads, parking brake❑ Inspect steering gear box, linkage & boots/lower arm ball


(for evaporator and blower unit)❑ Inspect front brake disc/pads, calipers and rotors❑ Replace engine oil and filter



(Continued)

(Continued)

❑ Inspect cooling system hoses and connections❑ Inspect brake pedal free play❑ Inspect all latch, hinges and locks







Maintenance

227

No check, No service required

❑ Automatic transaxle fluid (if equipped)







❑ Inspect rear brake disc/pads, parking brake❑ Inspect vapor hose and fuel filler cap, fuel tank❑ Inspect vacuum hose❑ Inspect manual transaxle fluild (if equipped)

(Continued)

(Continued)

❑ Replace climate control air filter (for evaporator and blower unit)


(240,000 km (150,000 miles) or 240 months)❑ Replace coolant






7 23

Maintenance

MAINTENANCE UNDER SEVERE USAGE CONDITIONSThe following items must be serviced more frequently on cars normally used under severe driving conditions. Referto the chart below for the appropriate maintenance intervals.R : Replace I : Inspect and, after inspection, clean, adjust, repair or replace if necessary

MAINTENANCE ITEMMAINTENANCE

OPERATIONMAINTENANCE INTERVALS

DRIVING CONDITION

ENGINE OIL AND FILTER REVERY 6,000 KM (3,750 MILES) OR

6 MONTHSA, B, C, D, E, F,

G, H, I, J, K

AIR CLEANER FILTER R MORE FREQUENTLY C, E

SPARK PLUGS R MORE FREQUENTLY B, H

AUTOMATIC TRANSAXLE FLUID R EVERY 96,000 KM (60,000 MILES) A, C, E, F, G, I

MANUAL TRANSAXLE FLUID R EVERY 120,000 KM (75,000 MILES) A, C, E, F, G, I

(Continued)

Maintenance

247

SEVERE DRIVING CONDITIONSA-Repeatedly driving short distance of less than 8 km (5 miles)

in normal temperature or less than 16 km (10 miles) in freez-ing temperature

B-Extensive engine idling or low speed driving for long dis-tances

C-Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads

D-Driving in areas using salt or other corrosive materials or invery cold weather

E-Driving in sandy areas

F -Driving in heavy traffic area over 32°C (90°F)G-Driving on uphill, downhill, or mountain roadH-Towing a Trailer, or using a camper, or roof rackI -Driving as a patrol car, taxi, other commercial use or vehicle

towingJ -Driving over 170 km/h (106 mph)K-Frequently driving in stop-and-go conditions

MAINTENANCE ITEMMAINTENANCE

OPERATIONMAINTENANCE INTERVALS

DRIVING CONDITION

FRONT DISC BRAKE/PADS, CALIPERSAND ROTORS

I MORE FREQUENTLY C, D, G, H

REAR DISC BRAKE/PADS, PARKINGBRAKE

I MORE FREQUENTLY C, D, G, H

STEERING GEAR BOX, LINKAGE &BOOTS/LOWER ARM BALL JOINT, UPPERARM BALL JOINT

I MORE FREQUENTLY C, D, E, F, G, H, I

DRIVE SHAFTS AND BOOTS IEVERY 120,000 KM (75,000 MILES) OR 6

MONTHSC, D, E, F, G, H, I, J

CLIMATE CONTROL AIR FILTER (FOREVAPORATOR AND BLOWER UNIT)

R MORE FREQUENTLY C, E

7 25

Maintenance

EXPLANATION OF SCHEDULED MAINTENANCE ITEMSEngine oil and filterThe engine oil and filter should bechanged at the intervals specified inthe maintenance schedule. If the caris being driven in severe conditions,more frequent oil and filter changesare required.

Drive beltsInspect all drive belts for evidence ofcuts, cracks, excessive wear or oilsaturation and replace if necessary.Drive belts should be checked peri-odically for proper tension andadjusted as necessary.

Fuel filterA clogged filter can limit the speed atwhich the vehicle may be driven,damage the emission system andcause multiple issues such as hardstarting. If an excessive amount offoreign matter accumulates in thefuel tank, the filter may requirereplacement more frequently.After installing a new filter, run theengine for several minutes, andcheck for leaks at the connections.Fuel filters should be installed by anauthorized Kia dealer.

Fuel lines, fuel hoses and con-nectionsCheck the fuel lines, fuel hoses andconnections for leakage and dam-age. Have an authorized Kia dealerreplace any damaged or leakingparts immediately.

Vapor hose and fuel filler capThe vapor hose and fuel filler capshould be inspected at those inter-vals specified in the maintenanceschedule. Make sure that a newvapor hose or fuel filler cap is cor-rectly replaced.

Maintenance

267

Vacuum crankcase ventilationhosesInspect the surface of hoses for evi-dence of heat and/or mechanicaldamage. Hard and brittle rubber,cracking, tears, cuts, abrasions, andexcessive swelling indicate deterio-ration. Particular attention should bepaid to examine those hose surfacesnearest to high heat sources, suchas the exhaust manifold.Inspect the hose routing to assurethat the hoses do not come in con-tact with any heat source, sharpedges or moving component whichmight cause heat damage ormechanical wear. Inspect all hoseconnections, such as clamps andcouplings, to make sure they aresecure, and that no leaks are pres-ent. Hoses should be replacedimmediately if there is any evidenceof deterioration or damage.

Air cleaner filterA Genuine Kia air cleaner filter isrecommended when the filter isreplaced.

Spark plugsMake sure to install new spark plugsof the correct heat range.

Cooling systemCheck cooling system components,such as radiator, coolant reservoir,hoses and connections for leakageand damage. Replace any damagedparts.

CoolantThe coolant should be changed atthe intervals specified in the mainte-nance schedule.

Manual transaxle fluid (if equipped)Inspect the manual transaxle fluidaccording to the maintenance sched-ule.

7 27

Maintenance

Automatic transaxle fluid (if equipped)Automatic transaxle fluid should notbe checked under normal usageconditions.But in severe conditions, the fluidshould be changed at an authorizedKia dealer in accordance to thescheduled maintenance at the begin-ning of this chapter.

✽✽ NOTICEAutomatic transaxle fluid color isbasically red. As the vehicle is driven, the auto-matic transaxle fluid will begin tolook darker.It is normal condition and youshould not judge the need to replacethe fluid based upon the changedcolor.

Brake hoses and linesVisually check for proper installation,chafing, cracks, deterioration andany leakage. Replace any deteriorat-ed or damaged parts immediately.

Brake/clutch fluidCheck brake fluid level in the brakefluid reservoir. The level should bebetween “MIN” and “MAX” marks onthe side of the reservoir. Use onlyhydraulic brake fluid conforming toDOT 3 or DOT 4 specification.

Parking brakeInspect the parking brake systemincluding the parking brake pedaland cables.

Brake discs, pads, calipersand rotorsCheck the pads for excessive wear,discs for run out and wear, andcalipers for fluid leakage.

Maintenance

287

Exhaust pipe and mufflerVisually inspect the exhaust pipes,muffler and hangers for cracks, dete-rioration, or damage. Start theengine and listen carefully for anyexhaust gas leakage. Tighten con-nections or replace parts as neces-sary.

Suspension mounting boltsCheck the suspension connectionsfor looseness or damage. Retightento the specified torque.

Steering gear box, linkage &boots/lower arm ball jointWith the vehicle stopped and engineoff, check for excessive free-play inthe steering wheel.Check the linkage for bends or dam-age. Check the dust boots and balljoints for deterioration, cracks, ordamage. Replace any damagedparts.

Drive shafts and bootsCheck the drive shafts, boots andclamps for cracks, deterioration, ordamage. Replace any damagedparts and, if necessary, repack thegrease.

Air conditioning refrigerant Check the air conditioning lines andconnections for leakage and dam-age.

7 29

Maintenance

ENGINE OILChecking the engine oil level

1. Be sure the vehicle is on levelground.

2. Start the engine and allow it toreach normal operating tempera-ture.

3. Turn the engine off and wait for afew minutes (about 5 minutes) forthe oil to return to the oil pan.

4. Pull the dipstick out, wipe it clean,and reinsert it fully.

5. Pull the dipstick out again andcheck the level. The level shouldbe between F and L.

If it is near or at L, add enough oil tobring the level to F. Do not overfill.

Use a funnel to help prevent oilfrom being spilled on engine com-ponents.

Use only the specified engine oil.(Refer to “Recommended lubricantsand capacities” in section 8.)

WARNING - Radiatorhose

Be very careful not to touch theradiator hose when checking oradding the engine oil as it maybe hot enough to burn you.

CAUTION - Replaceengine oil

Do not overfill with engine oil.Engine damage may result.

OMD070003N

OYDNMC2054

Maintenance

307

Changing the engine oil andfilterHave engine oil and filter changed byan authorized Kia dealer accordingto the Maintenance Schedule at thebeginning of this chapter.

WARNINGUsed engine oil may cause irri-tation or cancer of the skin ifleft in contact with the skin forprolonged periods of time.Always protect your skin bywashing your hands thoroughlywith soap and warm water assoon as possible after handlingused oil.

7 31

Maintenance

ENGINE COOLANTThe high-pressure cooling systemhas a reservoir filled with year-roundantifreeze coolant. The reservoir isfilled at the factory.Check the antifreeze protection andcoolant level at least once a year, atthe beginning of the winter season,and before traveling to a colder cli-mate.

Checking the coolant level

Check the condition and connectionsof all cooling system hoses andheater hoses. Replace any swollenor deteriorated hoses.The coolant level should be filledbetween F (MAX) and L (MIN) markson the side of the coolant reservoirwhen the engine is cool.If the coolant level is low, add enoughspecified coolant or distilled (deion-ized) water to provide protectionagainst freezing and corrosion. Bringthe level to F (MAX), but do not over-fill. If frequent coolant addition isrequired, see an authorized Kia deal-er for a cooling system inspection.

Recommended engine coolant• When adding coolant, use only

deionized water or soft water foryour vehicle and never mix hardwater in the coolant filled at the fac-tory. An improper coolant mixturecan result in serious malfunction orengine damage.

• The engine in your vehicle has alu-minum engine parts and must beprotected by an ethylene-glycol-based coolant to prevent corrosionand freezing.

• DO NOT USE alcohol or methanolcoolant or mix them with the spec-ified coolant.

• Do not use a solution that containsmore than 60% antifreeze or lessthan 35% antifreeze, which wouldreduce the effectiveness of thesolution.

WARNING - Cooling fanUse caution whenworking near theblade of the coolingfan. The electricmotor (cooling fan) is

controlled by engine coolanttemperature, refrigerant pres-sure and vehicle speed. It maysometimes operate even whenthe engine is not running.

OMD070004N

Maintenance

327

CAUTION - Removingradiator cap

Never attempt toremove the radiatorcap while the engineis operating or hot.Doing so might leadto cooling system andengine damage.

For mixture percentage, refer to thefollowing table.

WARNING Radiator cap

Do not remove the radiator capwhen the engine and radiatorare hot. Scalding hot coolantand steam may blow out underpressure.

OMD071005L

AmbientTemperature

Mixture Percentage (volume)

Antifreeze Water-15°C (5°F) 35 65

-25°C (-13°F) 40 60

-35°C (-31°F) 50 50

-45°C (-49°F) 60 40

7 33

Maintenance

Turn the engine off and wait until itcools down. Use care when remov-ing the radiator cap. Wrap a thicktowel around it, and turn it counter-clockwise slowly to the first stop.Step back while the pressure isreleased from the cooling system.When you are sure all the pressurehas been released, press down onthe cap, using a thick towel, and con-tinue turning counterclockwise toremove it.

Changing the coolantHave the coolant changed by anauthorized Kia dealer according tothe Maintenance Schedule at thebeginning of this section.

Maintenance

347

BRAKE/CLUTCH (IF EQUIPPED) FLUID Checking the brake/clutch*fluid level

Check the fluid level in the reservoirperiodically. The fluid level should bebetween MAX and MIN marks on theside of the reservoir.Before removing the reservoir capand adding brake/clutch* fluid, cleanthe area around the reservoir capthoroughly to prevent brake/clutch*fluid contamination.

* if equipped

If the level is low, add fluid to theMAX level. The level will fall withaccumulated mileage. This is a nor-mal condition associated with thewear of the brake linings and/orclutch disc (if equipped). If the fluidlevel is excessively low, have thebrake/clutch* system checked by anauthorized Kia dealer.

Use only the specified brake/clutch*fluid. (Refer to “Recommended lubri-cants and capacities” in chapter 8.)

Never mix different types of fluid.

In the event the brake/clutch* systemrequires frequent additions of fluid,the vehicle should be inspected byan authorized Kia dealer.When changing and addingbrake/clutch* fluid, handle it carefully.Do not let it come in contact withyour eyes. If brake/clutch* fluidshould come in contact with youreyes, immediately flush them with alarge quantity of fresh tap water.Have your eyes examined by a doc-tor as soon as possible.

Brake/clutch* fluid, which has beenexposed to open air for an extendedtime should never be used as itsquality cannot be guaranteed. Itshould be disposed of properly.

CAUTION - Brake/clutchfluid

Do not allow brake/clutch* fluidto contact the vehicle's bodypaint, as paint damage willresult.

CAUTION - Proper fluidOnly use brake/clutch fluid inbrake/clutch system. Smallamounts of improper fluids(such as engine oil) can causedamage to the brake/clutch sys-tem.

OYDDMC2004

7 35

Maintenance

WASHER FLUIDChecking the washer fluidlevel

Check the fluid level in the washerfluid reservoir and add fluid if neces-sary. Plain water may be used ifwasher fluid is not available.However, use washer solvent withantifreeze characteristics in cold cli-mates to prevent freezing.

Checking the parking brake

Check the stroke of the parkingbrake by counting the number of“clicks’’ heard while fully applying itfrom the released position. Also, theparking brake alone should securelyhold the vehicle on a fairly steepgrade. If the stroke is more or lessthan specified, have the parkingbrake adjusted by an authorized Kiadealer.

Stroke : 6~8 “clicks’’ at a force of 20kg (44 lbs, 196 N).

WARNING - Windshield

fluidDo not drink the windshieldwasher fluid. The windshieldwasher fluid is poisonous tohumans and animals.

WARNING - Flammable

fluidDo not allow the washer fluid tocome in contact with openflames or sparks. The wind-shield washer fluid reservoir isflammable under certain cir-cumstances.This can result in afire.

OMD070007

OYDDDR2105

PARKING BRAKE

Maintenance

367

AIR CLEANER Filter replacement

It must be replaced when necessary,and should not be washed.You can clean the filter when inspect-ing the air cleaner element.Clean the filter by using compressedair.

Replace the filter according to theMaintenance Schedule.If the vehicle is operated in extreme-ly dusty or sandy areas, replace theelement more often than the usualrecommended intervals. (Refer to“Maintenance under severe usageconditions” in this chapter.)

OMD070010

CAUTION - Air filter maintenance

• Do not drive with the air clean-er removed; this will result inexcessive engine wear.

• When removing the air cleanerfilter, be careful that dust ordirt does not enter the airintake, or damage may result.

• Use a Kia genuine part. Use ofnongenuine part could dam-age the air flow sensor.

7 37

Maintenance

CLIMATE CONTROL AIR FILTER (IF EQUIPPED)Filter inspectionThe climate control air filter shouldbe replaced according to theMaintenance Schedule. If the vehicleis operated in severely air-pollutedcities or on dusty rough roads for along period, it should be inspectedmore frequently and replaced earlier.When you replace the climate controlair filter, replace it performing the fol-lowing procedure, and be careful toavoid damaging other components.

Maintenance

387

WIPER BLADES Blade inspection

Commercial hot waxes applied byautomatic car washes have beenknown to make the windshield diffi-cult to clean.

Contamination of either the wind-shield or the wiper blades with for-eign matter can reduce the effective-ness of the windshield wipers.Common sources of contaminationare insects, tree sap, and hot waxtreatments used by some commer-cial car washes. If the blades are notwiping properly, clean both the win-dow and the blades with a goodcleaner or mild detergent, and rinsethoroughly with clean water.

Blade replacement When the wipers no longer cleanadequately, the blades may be wornor cracked, and require replacement.To prevent damage to the wiper armsor other components, do not attemptto move the wipers manually.The use of a non-specified wiperblade could result in wiper malfunc-tion and failure.

1JBA5122CAUTION - Wiper blades

To prevent damage to the wiperblades, do not use gasoline,kerosene, paint thinner, or othersolvents on or near them.

7 39

Maintenance

Front windshield wiper blade

Type A

1. Raise the wiper arm and turn thewiper blade assembly to exposethe plastic locking clip.

2. Compress the clip (1) and slidethe blade assembly downward (2).

3. Lift it off the arm.4. Install the blade assembly in the

reverse order of removal.

Type B1. Raise the wiper arm.

1LDA5023

CAUTION - Wiper armsDo not allow the wiper arm tofall against the windshield,since it may chip or crack thewindshield.

1JBA7037

1JBA7038

CAUTIONDo not allow the wiper arm tofall against the windshield,since it may chip or crack thewindscreen.

OHM078059

Maintenance

407

2. Lift up the wiper blade clip. Thenpull down the blade assembly andremove it.

3. Install the new blade assembly inthe reverse order of removal.

OHM078060 OHG070043

7 41

Maintenance

BATTERYFor best battery service

• Keep the battery securely mount-ed.

• Keep the battery top clean and dry.• Keep the terminals and connec-

tions clean, tight, and coated withpetroleum jelly or terminal grease.

• Rinse any spilled electrolyte fromthe battery immediately with asolution of water and baking soda.

• If the vehicle is not going to beused for an extended time, discon-nect the battery cables.

WARNING - Risk of explosion

Keep lit cigarettes andall other flames orsparks away from thebattery.The battery containshydrogen -- a highlycombustible gas whichwill explode if it comesin contact with a flame orspark.

WARNING - Sulfuric acidin batteries

Keep batteries out of thereach of childrenbecause batteries con-tain highly corrosiveSULFURIC ACID andelectrolytes. Do notallow battery acid tocontact your skin, eyes,clothing or paint finish.Wear eye protectionwhen charging or work-ing near a battery.Always provide ventila-tion when working in anenclosed space.

OYDDMC2008

Maintenance

427

Always read the followinginstructions carefully whenhandling a battery.If any electrolyte gets intoyour eyes, flush your eyeswith clean water for at least15 minutes and get immedi-ate medical attention.If electrolyte gets on yourskin, thoroughly wash thecontacted area. If you feelpain or burning sensation,get medical attention imme-diately.An inappropriately disposedbattery can be harmful to theenvironment and humanhealth. Dispose the batteryaccording to your local law(s)or regulation.The battery contains lead. Donot dispose of it after use.Please return the battery toan authorized Kia dealer tobe recycled.

When the vehicle remains unused fora long time while tempertures arelow, disconnect the battery and keepit indasrs.

WARNING - Recharging

batteryNever attempt to recharge thebattery when the battery cablesare connected.

WARNING - Risk of elec-

trocutionNever touch the electrical igni-tion system while the vehicle isrunning. This system workswith high voltage which can"zap" you.

7 43

Maintenance

Battery recharging Your vehicle has a maintenance-free,calcium-based battery.• If the battery becomes discharged

in a short time (because, for exam-ple, the headlights or interior lightswere left on while the vehicle wasnot in use), recharge it by slowcharging (trickle) for 10 hours.

• If the battery gradually dischargesbecause of high electric load whilethe vehicle is being used, rechargeit at 20-30A for two hours.

When recharging the battery,observe the following precautions:• The battery must be removed from

the vehicle and placed in an areawith good ventilation.

• Watch the battery during charging,and stop or reduce the chargingrate if the battery cells begingassing (boiling) violently or if thetemperature of the electrolyte ofany cell exceeds 49°C (120°F).

• Wear eye protection when check-ing the battery during charging.

• Disconnect the battery charger inthe following order.1. Turn off the battery charger main

switch.2. Unhook the negative clamp from

the negative battery terminal.3. Unhook the positive clamp from

the positive battery terminal.• Before performing maintenance or

recharging the battery, turn off allaccessories and stop the engine.

• The negative battery cable must beremoved first and installed lastwhen the battery is disconnected.

Reset itemsItems should be reset after the bat-tery has been discharged or the bat-tery has been disconnected.• Auto down window (See chapter 4)• Sunroof (See chapter 4)• Trip computer (See chapter 4)• Climate control system

(See chapter 4)• Clock (See chapter 4)• Audio (See chapter 4)

Maintenance

447

TIRES AND WHEELS Tire care For proper maintenance, safety, andmaximum fuel economy, you mustalways maintain recommended tireinflation pressures and stay withinthe load limits and weight distributionrecommended for your vehicle.

Recommended cold tire infla-tion pressures All tire pressures (including thespare) should be checked when thetires are cold. “Cold Tires” means thevehicle has not been driven for atleast three hours or driven less than1.6 km (one mile).Recommended pressures must bemaintained for the best ride, top vehi-cle handling, and minimum tire wear.For recommended inflation pressurerefer to “Tire and wheels” in section8.

All specifications (sizes and pres-sures) can be found on a labelattached to the driver’s side centerpillar.

WARNING - Tire underin-flation

Inflate your tires consistent withthe instructions provided in thismanual. Severe underinflation(70 kPa (10 psi) or more) canlead to severe heat build-up,causing blowouts, tread separa-tion and other tire failures thatcan result in the loss of vehiclecontrol.This risk is much higheron hot days and when drivingfor long periods at high speeds.

OMD060012N

7 45

Maintenance

• Underinflation also results inexcessive wear, poor handling andreduced fuel economy. Wheeldeformation also is possible. Keepyour tire pressures at the properlevels. If a tire frequently needsrefilling, have it checked by anauthorized Kia dealer.

• Overinflation produces a harshride, excessive wear at the centerof the tire tread, and a greater pos-sibility of damage from road haz-ards.

• Warm tires normally exceed rec-ommended cold tire pressures by28 to 41 kPa (4 to 6 psi). Do notrelease air from warm tires toadjust the pressure or the tires willbe underinflated.

• Be sure to reinstall the tire inflationvalve caps. Without the valve cap,dirt or moisture could get into thevalve core and cause air leakage. Ifa valve cap is missing, install anew one as soon as possible.

Always observe the following:• Check tire pressure when the tires

are cold. (After vehicle has beenparked for at least three hours orhasn't been driven more than 1.6km (one mile) since startup.)

• Check the pressure of your sparetire each time you check the pres-sure of other tires.

• Never overload your vehicle. Becareful not to overload a vehicleluggage rack if your vehicle isequipped with one.

Checking tire inflation pres-sureCheck your tires once a month ormore.Also, check the tire pressure of thespare tire.

How to checkUse a good quality gauge to checktire pressure. You can not tell if yourtires are properly inflated simply bylooking at them. Radial tires maylook properly inflated even whenthey're underinflated.Check the tire's inflation pressurewhen the tires are cold. - "Cold"means your vehicle has been sittingfor at least three hours or driven nomore than 1.6 km (1 mile).

Maintenance

467

Remove the valve cap from the tirevalve stem. Press the tire gauge firm-ly onto the valve to get a pressuremeasurement. If the cold tire inflationpressure matches the recommendedpressure on the tire and loadinginformation label, no further adjust-ment is necessary. If the pressure islow, add air until you reach the rec-ommended amount.If you overfill the tire, release air bypushing on the metal stem in thecenter of the tire valve. Recheck thetire pressure with the tire gauge. Besure to put the valve caps back onthe valve stems. They help preventleaks by keeping out dirt and mois-ture.

• Inspect your tires frequently forproper inflation as well as wear anddamage. Always use a tire pres-sure gauge.

• Tires with too much or too littlepressure wear unevenly causingpoor handling, loss of vehicle con-trol, and sudden tire failure leadingto accidents, injuries, and evendeath. The recommended cold tirepressure for your vehicle can befound in this manual and on the tirelabel located on the driver's sidecenter pillar.

• Remember to check the pressureof your spare tire. Kia recommendsthat you check the spare everytime you check the pressure of theother tires on your vehicle.

Tire rotation To equalize tread wear, it is recom-mended that the tires be rotatedevery 12,000 km (7,500 miles) orsooner if irregular wear develops.During rotation, check the tires forcorrect balance.When rotating tires, check for unevenwear and damage. Abnormal wear isusually caused by incorrect tire pres-sure, improper wheel alignment, out-of-balance wheels, severe braking orsevere cornering. Look for bumps orbulges in the tread or side of tire.Replace the tire if you find either ofthese conditions. Replace the tire iffabric or cord is visible. After rotation,be sure to bring the front and rear tirepressures to specification and checklug nut tightness.Refer to “Tire and wheels” in chapter8.

7 47

Maintenance

Disc brake pads should be inspectedfor wear whenever tires are rotated.

Rotate radial tires that have anasymmetric tread pattern only fromfront to rear and not from right to left.Do not use the compact spare tire fortire rotation.

Wheel alignment and tire bal-ance The wheels on your vehicle werealigned and balanced carefully at thefactory to give you the longest tire lifeand best overall performance.In most cases, you will not need tohave your wheels aligned again.However, if you notice unusual tirewear or your vehicle pulling one wayor the other, the alignment may needto be reset.If you notice your vehicle vibratingwhen driving on a smooth road, yourwheels may need to be rebalanced.

WARNING - Mixing tiretypes

Do not mix bias ply and radialply tires under any circum-stances.This may cause unusu-al handling characteristics.

S2BLA790A

CBGQ0707A

Without a spare tire

Directional tires (if equipped)

CAUTION - Wheel weightImproper wheel weights candamage your vehicle's alu-minum wheels. Use onlyapproved wheel weights.

Maintenance

487

Tire replacement

If the tire is worn evenly, a tread wearindicator will appear as a solid bandacross the tread. This shows there isless than 1.6 mm (1/16 inch) of treadleft on the tire. Replace the tire whenthis happens.Do not wait for the band to appearacross the entire tread before replac-ing the tire.

The ABS works by comparing thespeed of the wheels. Tire size canaffect wheel speed. When replacingtires, all 4 tires must use the samesize originally supplied with the vehi-cle. Using tires of a different size cancause the ABS (Anti-lock BrakeSystem) and ESC (ElectronicStability Control) (if equipped) towork irregularly.

Compact spare tire replacement A compact spare tire has a shortertread life than a regular size tire.Replace it when you can see thetread wear indicator bars on the tire.The replacement compact spare tireshould be the same size and designtire as the one provided with yournew vehicle and should be mountedon the same compact spare tirewheel. The compact spare tire is notdesigned to be mounted on a regularsize wheel, and the compact sparetire wheel is not designed for mount-ing a regular size tire.

OEN076053

Tread wear indicator

7 49

Maintenance

Wheel replacement When replacing the metal wheels forany reason, make sure the newwheels are equivalent to the originalfactory units in diameter, rim widthand offset.A wheel that is not the correct sizemay adversely affect wheel andbearing life, braking and stoppingabilities, handling characteristics,ground clearance, body-to-tire clear-ance, snow chain clearance,speedometer and odometer calibra-tion, headlight aim and bumperheight.

Tire tractionTire traction can be reduced if youdrive on worn tires, tires that areimproperly inflated or on slipperyroad surfaces. Tires should bereplaced when tread wear indicatorsappear. Slow down whenever thereis rain, snow or ice on the road, toreduce the possibility of losing con-trol of the vehicle.

Tire maintenance In addition to proper inflation, correctwheel alignment helps to decreasetire wear. If you find a tire is wornunevenly, have your dealer check thewheel alignment.When you have new tires installed,make sure they are balanced. Thiswill increase vehicle ride comfort andtire life. Additionally, a tire shouldalways be rebalanced if it is removedfrom the wheel.

Tire sidewall labeling

This information identifies anddescribes the fundamental charac-teristics of the tire and also providesthe tire identification number (TIN)for safety standard certification. TheTIN can be used to identify the tire incase of a recall.

1. Manufacturer or brand nameManufacturer or Brand name isshown.

CAUTION - WheelWheels that do not meet Kia'sspecifications may fit poorlyand result in damage to thevehicle or unusual handling andpoor vehicle control.

I030B04JM

1

1

23

4

5,6

7

Maintenance

507

2. Tire size designation A tire’s sidewall is marked with a tiresize designation. You will need thisinformation when selecting replace-ment tires for your car. The followingexplains what the letters and num-bers in the tire size designationmean.Example tire size designation:(These numbers are provided as anexample only; your tire size designa-tor could vary depending on yourvehicle.)P205/55R16 89H

P - Applicable vehicle type (tiresmarked with the prefix “P’’ areintended for use on passengervehicles or light trucks; however,not all tires have this marking).

205 - Tire width in millimeters.55 - Aspect ratio. The tire’s section

height as a percentage of itswidth.

R - Tire construction code (Radial).16 - Rim diameter in inches.

89 - Load Index, a numerical codeassociated with the maximumload the tire can carry.

H - Speed Rating Symbol. See thespeed rating chart in this sectionfor additional information.

Wheel size designation Wheels are also marked with impor-tant information that you need if youever have to replace one. The follow-ing explains what the letters andnumbers in the wheel size designa-tion mean.

Example wheel size designation:6.0JX16

6.0 - Rim width in inches.J - Rim contour designation.16 - Rim diameter in inches.

Tire speed ratings The chart below lists many of the dif-ferent speed ratings currently beingused for passenger vehicles. Thespeed rating is part of the tire sizedesignation on the sidewall of thetire. This symbol corresponds to thattire's designed maximum safe oper-ating speed.

S 180 km/h (112 mph)T 190 km/h (118 mph)H 210 km/h (130 mph)V 240 km/h (149 mph)Z 240 km/h (Above 149 mph)

Maximum SpeedSpeedRatingSymbol

7 51

Maintenance

3. Checking tire life (TIN : TireIdentification Number)

Any tires that are over 6 years old,based on the manufacturing date,(including the spare tire) should bereplaced by new ones. You can findthe manufacturing date on the tiresidewall (possibly on the inside of thewheel), displaying the DOT Code.The DOT Code is a series of num-bers on a tire consisting of numbersand English letters. The manufactur-ing date is designated by the last fourdigits (characters) of the DOT code.

DOT : XXXX XXXX OOOOThe front part of the DOT means aplant code number, tire size andtread pattern and the last four num-bers indicate week and year manu-factured.For example:DOT XXXX XXXX 1613 representsthat the tire was produced in the 16thweek of 2013.

4. Tire ply composition and mate-rial

The number of layers or plies of rub-ber-coated fabric in the tire. Tiremanufacturers also must indicate thematerials in the tire, which includesteel, nylon, polyester, and others.The letter "R" means radial ply con-struction; the letter "D" means diago-nal or bias ply construction; and theletter "B" means belted-bias ply con-struction.

5. Maximum permissible inflationpressure

This number is the greatest amountof air pressure that should be put inthe tire. Do not exceed the maximumpermissible inflation pressure. Referto the Tire and Loading Informationlabel for recommended inflationpressure.

6. Maximum load ratingThis number indicates the maximumload in kilograms and pounds thatcan be carried by the tire. Whenreplacing the tires on the vehicle,always use a tire that has the sameload rating as the factory installedtire.

WARNING - Tire ageReplace tires within the recom-mended time frame. Failure toreplace tires as recommendedcan result in sudden tire failure,which could lead to a loss ofcontrol and an accident.

Maintenance

527

7. Uniform tire quality grading Quality grades can be found whereapplicable on the tire sidewallbetween tread shoulder and maxi-mum section width.For example:TREADWEAR 440 TRACTION A TEMPERATURE A

Tread wearThe tread wear grade is a compara-tive rating based on the wear rate ofthe tire when tested under controlledconditions on a specified govern-ment test course. For example, a tiregraded 150 would wear one-and-a-half times (1½) as well on the gov-ernment course as a tire graded 100.The relative performance of tiresdepends upon the actual conditionsof their use, however, and maydepart significantly from the normdue to variations in driving habits,service practices and differences inroad characteristics and climate.

Tires degrade over time, even whenthey are not being used. Regardlessof the remaining tread, we recom-mend that tires be replaced afterapproximately six (6) years of nor-mal service. Heat caused by hot cli-mates or frequent high loading con-ditions can accelerate the agingprocess.These grades are molded on theside-walls of passenger vehicle tires.The tires available as standard oroptional equipment on your vehiclesmay vary with respect to grade.

Traction - AA, A, B & C The traction grades, from highest tolowest, are AA, A, B and C. Thosegrades represent the tires ability tostop on wet pavement as measuredunder controlled conditions on spec-ified government test surfaces ofasphalt and concrete. A tire markedC may have poor traction perform-ance.The traction grade assigned to thistire is based on straight-ahead brak-ing traction tests, and does notinclude acceleration, cornering,hydroplaning, or peak traction char-acteristics.

7 53

Maintenance

Temperature -A, B & CThe temperature grades are A (thehighest), B and C representing thetire's resistance to the generation ofheat and its ability to dissipate heatwhen tested under controlled condi-tions on a specified indoor laboratorytest wheel.Sustained high temperature cancause the material of the tire todegenerate and reduce tire life, andexcessive temperature can lead tosudden tire failure. Grades B and Arepresent higher levels of perform-ance on the laboratory test wheelthan the minimum required by law.

Tire terminology and definitionsAir Pressure: The amount of airinside the tire pressing outward onthe tire. Air pressure is expressed inpounds per square inch (psi) or kilo-pascal (kPa).Accessory Weight: This means thecombined weight of optional acces-sories. Some examples of optionalaccessories are, automatictransaxle, power seats, and air con-ditioning.Aspect Ratio: The relationship of atire's height to its width.Belt: A rubber coated layer of cordsthat is located between the plies andthe tread. Cords may be made fromsteel or other reinforcing materials.Bead: The tire bead contains steelwires wrapped by steel cords thathold the tire onto the rim.Bias Ply Tire: A pneumatic tire inwhich the plies are laid at alternateangles less than 90 degrees to thecenterline of the tread.

Cold Tire Pressure: The amount ofair pressure in a tire, measured inpounds per square inch (psi) or kilo-pascals (kPa) before a tire has builtup heat from driving.Curb Weight: This means the weightof a motor vehicle with standard andoptional equipment including themaximum capacity of fuel, oil andcoolant, but without passengers andcargo.DOT Markings: The DOT codeincludes the Tire IdentificationNumber (TIN), an alphanumeric des-ignator which can also identify thetire manufacturer, production plant,brand and date of production.GVWR: Gross Vehicle Weight RatingGAWR FRT: Gross Axle WeightRating for the Front Axle.GAWR RR: Gross Axle WeightRating for the Rear axle.

Maintenance

547

Intended Outboard Sidewall: Theside of an asymmetrical tire, thatmust always face outward whenmounted on a vehicle.Kilopascal (kPa): The metric unit forair pressure.Load Index: An assigned numberranging from 1 to 279 that corre-sponds to the load carrying capacityof a tire.Maximum Inflation Pressure: Themaximum air pressure to which acold tire may be inflated. The maxi-mum air pressure is molded onto thesidewall.Maximum Load Rating: The loadrating for a tire at the maximum per-missible inflation pressure for thattire.Maximum Loaded Vehicle Weight:The sum of curb weight; accessoryweight; vehicle capacity weight; andproduction options weight.Normal Occupant Weight: Thenumber of occupants a vehicle isdesigned to seat multiplied by 68 kg(150 pounds).

Occupant Distribution: Designatedseating positions.Outward Facing Sidewall: The sideof a asymmetrical tire that has a par-ticular side that faces outward whenmounted on a vehicle. The outwardfacing sidewall bears white letteringor bears manufacturer, brand, and/ormodel name molding that is higher ordeeper than the same moldings onthe inner facing sidewall.Passenger (P-Metric) Tire: A tireused on passenger cars and somelight duty trucks and multipurposevehicles.Recommended Inflation Pressure:Vehicle manufacturer's recommend-ed tire inflation pressure and shownon the tire placard.Radial Ply Tire: A pneumatic tire inwhich the ply cords that extend to thebeads are laid at 90 degrees to thecenterline of the tread.Rim: A metal support for a tire andupon which the tire beads are seat-ed.Sidewall: The portion of a tirebetween the tread and the bead.

Speed Rating: An alphanumericcode assigned to a tire indicating themaximum speed at which a tire canoperate.Traction: The friction between thetire and the road surface. Theamount of grip provided.Tread: The portion of a tire thatcomes into contact with the road.Treadwear Indicators: Narrowbands, sometimes called "wearbars," that show across the tread of atire when only 2/32 inch of treadremains.UTQGS: Uniform Tire QualityGrading Standards, a tire informationsystem that provides consumers withratings for a tire's traction, tempera-ture and treadwear. Ratings aredetermined by tire manufacturersusing government testing proce-dures. The ratings are molded intothe sidewall of the tire.Vehicle Capacity Weight: The num-ber of designated seating positionsmultiplied by 68 kg (150 lbs.) plus therated cargo and luggage load.

7 55

Maintenance

Vehicle Maximum Load on theTire: Load on an individual tire due tocurb and accessory weight plusmaximum occupant and cargoweight.Vehicle Normal Load on the Tire:Load on an individual tire that isdetermined by distributing to eachaxle its share of the curb weight,accessory weight, and normal occu-pant weight and driving by 2.Vehicle Placard: A label permanent-ly attached to a vehicle showing theoriginal equipment tire size and rec-ommended inflation pressure.

All season tires Kia specifies all season tires onsome models to provide good per-formance for use all year round,including snowy and icy road condi-tions. All season tires are identifiedby ALL SEASON and/or M+S (Mudand Snow) on the tire sidewall. Snowtires have better snow traction thanall season tires and may be moreappropriate in some areas.

Summer tires Kia specifies summer tires on somemodels to provide superior perform-ance on dry roads. Summer tire per-formance is substantially reduced insnow and ice. Summer tires do nothave the tire traction rating M+S(Mud and Snow) on the tire side wall.If you plan to operate your vehicle insnowy or icy conditions, Kia recom-mends the use of snow tires or allseason tires on all four wheels.

Snow tiresIf you equip your car with snow tires,they should be the same size andhave the same load capacity as theoriginal tires. Snow tires should beinstalled on all four wheels; other-wise, poor handling may result.Snow tires should carry 28 kPa (4psi) more air pressure than the pres-sure recommended for the standardtires on the tire label on the driver'sside of the center pillar, or up to themaximum pressure shown on the tiresidewall, whichever is less.Do not drive faster than 120 km/h (75mph) when your vehicle is equippedwith snow tires.

Maintenance

567

Radial-ply tiresRadial-ply tires provide improvedtread life, road hazard resistance andsmoother high speed ride. The radi-al-ply tires used on this vehicle areof belted construction and are select-ed to complement the ride and han-dling characteristics of your vehicle.Radial-ply tires have the same loadcarrying capacity as bias-ply or biasbelted tires of the same size and usethe same recommended inflationpressure. Mixing of radial-ply tireswith bias-ply or bias belted tires isnot recommended. Any combina-tions of radial-ply and bias-ply or biasbelted tires when used on the samevehicle will seriously deterioratevehicle handling. The best rule to fol-low is: identical radial-ply tires shouldalways be used as a set of four.

Longer wearing tires can be moresusceptible to irregular tread wear. Itis very important to follow the tirerotation interval shown in this sectionto achieve the tread life potential ofthese tires. Cuts and punctures inradial-ply tires are repairable only inthe tread area, because of sidewallflexing. Consult your tire dealer forradial-ply tire repairs.

Low aspect ratio tire(if equipped)Low aspect ratio tires, whose aspectratio is lower than 50, are providedfor sporty looks.Because the low aspect ratio tiresare optimized for handling and brak-ing, it may be more uncomfortable toride in and there is more noise com-pare with normal tires.

7 57

Maintenance

CAUTIONBecause the sidewall of the lowaspect ratio tire is shorter thanthe normal, the wheel and tire ofthe low aspect ratio tire is easi-er to be damaged. So, follow theinstructions below.- When driving on a rough road

or off road, drive cautiouslybecause tires and wheels maybe damaged. And after driving,inspect tires and wheels.

- When passing over a pothole,speed bump, manhole, or curbstone, drive slowly so that thetires and wheels are not dam-aged.

- If the tire is impacted, we rec-ommend that you inspect thetire condition or contact anauthorized Kia dealer.

- To prevent damage to the tire,inspect the tire condition andpressure every 3,000km.

CAUTION• It is not easy to recognize the

tire damage with your owneyes. But if there is the slight-est hint of tire damage, eventhough you cannot see the tiredamage with your own eyes,have the tire checked orreplaced because the tiredamage may cause air leak-age from the tire.

• If the tire is damaged by driv-ing on a rough road, off road,pothole, manhole, or curbstone, it will not be covered bythe warranty.

• You can find out the tire infor-mation on the tire sidewall.

Maintenance

587

FUSESA vehicle’s electrical system is pro-tected from electrical overload dam-age by fuses.This vehicle has 2 fuse panels, onelocated in the driver’s side panel bol-ster, the other in the engine compart-ment near the battery.If any of your vehicle’s lights, acces-sories, or controls do not work, checkthe appropriate circuit fuse. If a fusehas blown, the element inside thefuse has melted.If the electrical system does notwork, first check the driver’s sidefuse has melted.Before replacing a blown fuse, dis-connect the negative battery cable.Always replace a blown fuse withone of the same rating.If the replacement fuse blows, thisindicates an electrical problem. Avoidusing the system involved and imme-diately consult an authorized Kiadealer.Three kinds of fuses are used: bladetype for lower amperage rating, car-tridge type, and multi fuse for higheramperage ratings.

✽✽ NOTICEThe actual fuse/relay panel labelmay differ from equipped items.

WARNING - Fuse replace-ment

• Never replace a fuse with any-thing but another fuse of thesame rating.

• A higher capacity fuse couldcause damage and possibly afire.

• Never install a wire or alu-minum foil instead of the prop-er fuse - even as a temporaryrepair. It may cause extensivewiring damage and a possiblefire.

CAUTIONDo not use a screwdriver or anyother metal object to removefuses because it may cause ashort circuit and damage thesystem.

OXM073122

Normal

Normal

■ Blade type

■ Cartridge type

■ Multi fuse

Blown

Blown

Normal Blown

Normal Blown

7 59

Maintenance

Instrument panel fuse replace-ment

1. Turn the ignition switch and allother switches off.

2. Open the fuse panel cover.

3. Pull the suspected fuse straightout. Use the removal tool providedin the engine compartment fusepanel.

4. Check the removed fuse; replace itif it is blown.

5. Push in a new fuse of the samerating, and make sure it fits tightlyin the clips.

If it fits loosely, consult an authorizedKia dealer.If you do not have a spare, use afuse of the same rating from a circuityou may not need for operating thevehicle, such as the cigarette lighterfuse.

CAUTION• When replacing a blown fuse

or relay with a new one, makesure the new fuse or relay fitstightly into the clips Theincomplete fastening fuse orrelay may cause the vehiclewiring and electric systemsdamage and a possible fire.

• Do not input any other objectsexcept fuses or relays intofuse/relay terminals such as adriver or wiring. It may causecontact failure and systemmalfunction.

OYDDMC2009

OYDDMC2010

Maintenance

607

If the headlights or other electricalcomponents do not work and thefuses are OK, check the fuse panelin the engine compartment. If a fuseis blown, it must be replaced.

Fuse switch

Your vehicle is equipped with a fuseswitch to prevent battery discharge ifyour vehicle is parked without beingoperated for prolonged periods.Use the following procedures beforeparking the vehicle for prolongedperiods.1. Turn off the engine.2. Turn off the headlights and tail

lights.3. Open the driver’s side panel cover

and pull up the memory fuse.

✽✽ NOTICE• If the fuse switch is off, the warn-

ing chime, audio, clock and interi-or lamps, etc., will not operate.Some items must be reset afterreplacement. Refer to “Battery” inthis chapter.

• Even when the fuse switch ispulled up, the battery can still bedischarged by operation of theheadlights or other electricaldevices.

OYDDMC2040

7 61

Maintenance

Engine compartment fusereplacement

1. Turn the ignition switch and allother switches off.

2. Remove the fuse panel cover bypressing the tab and pulling thecover up.

3. Check the removed fuse; replace itif it is blown. To remove or insertthe fuse, use the fuse puller in theengine compartment fuse panel.

4. Push in a new fuse of the samerating, and make sure it fits tightlyin the clips. If it fits loosely, consultan authorized Kia dealer.

Main fuse

If the main fuse is blown, it must beremoved as follows:1. Turn off the engine.2. Disconnect the negative battery

cable.3. Remove the nuts shown in the pic-

ture above.4. Replace the fuse with a new one

of the same rating.5. Reinstall in the reverse order of

removal.

CAUTIONAfter checking the fuse panel inthe engine compartment,securely install the fuse panelcover. If not, electrical failuresmay occur from water contact.

OYDDMC2011

OMD070021

Maintenance

627

Multi fuse

If the multi fuse is blown, it must beremoved as follows:1. Remove the fuse panel in the

engine compartment.2. Remove the nuts shown in the pic-

ture above.3. Replace the fuse with a new one

of the same rating.4. Reinstall in the reverse order of

removal.

OMD070022

7 63

Maintenance

Fuse/relay panel description

Inside the fuse/relay panel covers,you can find the fuse/relay labeldescribing fuse/relay name andcapacity.

✽✽ NOTICENot all fuse panel descriptions inthis manual may be applicable toyour vehicle. It is accurate at thetime of printing. When you inspectthe fuse panel in your vehicle, referto the fuse panel label.

OYDNMC2014

OYDDMC2012

Maintenance

647

Engine compartment fusepanel


OYDNMC2015

OYDDMC2013

7 65

Maintenance

Engine room (Battery terminal cover)


OYDNMC2048

OYDNMC2059

Maintenance

667

Instrument panel fuse panelFuse Name Fuse rating Circuit Protected P/SEAT DRV 30A Driver IMS Module, Driver Seat Manual Switch

SPARE 4 25A -

P/WDW RH 25A Smart Junction Box (Power Window RH Relay), Passenger Safety Power Window Module

TRUNK 10A Smart Junction Box (Trunk Relay)

P/WDW LH 25A Smart Junction Box (Power Window LH Relay), Driver Safety Power Window Module

DR LOCK 20A Smart Junction Box (Door Lock Relay, Door Unlock Relay), ICM Relay Box (Two Turn Unlock Relay)

SPARE 3 20A -

C/LIGHTER 20A Cigarette Lighter & Power Outlet (Cigarette Lighter)

S/HEATER RR 20A Rear Seat Warmer LH/RH

MODULE 8 10A BCM, Smart Key Control Module

SPARE 2 7.5A -

SPARE 1 15A -

MODULE 1 10A Smart Key Control Module, BCM, Digital Clock, Audio, A/V & Navigation Head Unit, Power OutsideMirror Switch, DC-DC Converter, MTS Module

A/CON 7.5A A/C Control Module, Cluster Ionizer, E/R Fuse & Relay Box (Blower Relay, GSL PTC Relay)

MODULE 5 7.5A Sunroof, Driver CCS Control Module, Passenger Seat Warmer Module, Rear Seat Warmer LH/RH

HTD MIRR 10A ECM/PCM, A/C Control Module, Driver/Passenger Power Outside Mirror

INTERIOR LAMP 7.5A Trunk Room Lamp, Glove Box Lamp, Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp,Ignition Key ILL. & Door Warning Switch (W/O Smart Key)

MODULE 6 7.5A Sport Mode Switch, Key Solenoid

PDM 2 7.5A [With Smart Key] Smart Key Control Module [W/O Smart Key] Immobilizer Module

SUNROOF 20A Sunroof

MODULE 2 10A

Electro Chromic Mirror, Multipurpose Check Connector, A/C Control Module, Driver CCS Switch, DriverCCS Control Module, Passenger Seat Warmer Module Driver IMS Module, Passenger Seat WarmerSwitch, A/V & Navigation Head Unit, DC-DC Converter, MTS Module, ATM Lever Indicator, PAS OffSwitch Rear Seat Warmer LH/RH, Rear Power Window Switch LH/RH

7 67

Maintenance

Fuse Name Fuse rating Circuit Protected HTD STRG 15A Steering Wheel Heater

IG 1 20A W/O Smart Key : E/R Fuse & Relay Box (Fuse - TCU 1, ECU 3, ABS 3)

WIPER FRT 25A Wiper Motor, E/R Fuse & Relay Box (Wiper Relay), Multifunction Switch (Wiper)

MULTIMEDIA 2 7.5A MTS Module

MEMORY 7.5A

Driver IMS Module, Driver Smart Key Outside Handle, Passenger Smart Key Outside Handle, BCM,Tire Pressure Monitoring Module, Auto Light & Photo Sensor Instrument Cluster, Data Link Connector,Multipurpose Check Connector, Digital Clock, A/C Control Module, Electro Chromic Mirror, DriverPower Outside Mirror Passenger Power Outside Mirror

MODULE 7 10A ICM Relay Box (Turn Signal Lamp Sound Relay, Folding Relay, Unfolding Relay)

PDM 3 7.5A [With Smart Key] Smart Key Control Module [W/O Smart Key] Immobilizer Module

MDPS 7.5A MDPS Unit

MODULE 3 7.5A Instrument Cluster

START 7.5A [With Burglar Alarm & W/O Smart Key & W/O IMMO.] ICM Relay Box (Burglar Alarm Relay) [W/OBurglar Alarm or With Smart Key or With IMMO.] Transaxle Range Switch (A/T), E/R Fuse & Relay Box(Start 1 Relay), Smart Key Control Module, ECM

MULTIMEDIA 1 15A Audio, A/V & Navigation Head Unit, DC-DC Converter

BRAKE SWITCH 10A Stop Lamp Switch, Smart Key Control Module

PDM 1 20A Smart Key Control Module

POWER OUTLET FRT 20A Cigarette Lighter & Power Outlet (Power Outlet)

A/BAG IND 7.5A Instrument Cluster (Air Bag IND.)

MODULE 4 10A Crash Pad Switch, Tire Pressure Monitoring Module, Stop Lamp Switch, Digital Clock, BCM, ISG OffSwitch, Rear Parking Assist Sensor LH (Out/In) Rear Parking Assist Sensor RH (Out/In), Front ParkingAssist Sensor LH/RH

A/BAG 15A SRS Control Module, Passenger Weight Classification Sensor

Maintenance

687

Engine compartment fuse panelFuse Name Fuse rating Circuit Protected

MULTI FUSE

MDPS 80A MDPS Unit

B+1 60A Smart Junction Box (ARISU-LT IPS 1 (4CH), Fuse - MODULE 6, MODULE 7, P/WDW LH,P/WDW RH, TRUNK)

ABS 1 40A ESC Module

C/FAN 40A C/Fan 1 Relay, C/Fan 2 Relay

RR HTD 40A RR HTD Relay

BLOWER 40A Blower Relay

GSL PTC 60A GSL PTC Relay

B+2 60A Smart Junction Box (ARISU-LT IPS 3 (4CH), ARISU-LT IPS 4 (4CH), IPS 5 (2CH), Fuse - PDM1, P/SEAT DRV BRAKE SWITCH, S/HEATER RR)

FUSE

B/UP LAMP 10A A/T : Electro Chromic Mirror, Audio, A/V & Navigation Head Unit, Rear Combination Lamp (In)LH/RH Smart Junction Box (IPS Control Module), M/T : Back-Up Lamp Switch

TCU 1 15A Transaxle Range Switch, Vehicle Speed Sensor, Oil Pump Inverter, E/R Fuse & Relay Box(Fuse - B/UP LAMP )

ABS 3 10A ESC Module, Yaw Rate Sensor

ECU 3 10A ECM/PCM

A/CONSWITCH

10A A/C Control Module, Blower Motor, Blower Relay, ECM/PCM, Blower Resistor

WIPER 10A ECM/PCM, Wiper Motor, E/R Fuse & Relay Box (Wiper Relay)

B+3 50A Smart Junction Box (Leak Current Autocut Device, Fuse - PDM 2, DR LOCK, SUNROOF)

EMS 40A EMS Box (Engine Control Relay, Fuse -ECU 4, A/CON, F/PUMP)

ISG INVERTER

50A Oil Pump Inverter

DEICER 15A ICM Relay Box (Front Deicer Relay)

7 69

Maintenance

Fuse Name Fuse rating Circuit Protected

FUSE

STOP LAMP 15A Stop Signal Electronic Module

S/HEATERFRT

20A Driver CCS Control Module, Passenger Seat Warmer Module

HORN 15A Horn Relay, ICM Relay Box (Burglar Alarm Horn Relay)

ECU 5 15A G4NC : ECM/PCM

IG 2 40A W/O Smart Key : Ignition Switch, Start Relay, With Smart Key : PDM 4 (IG2) Relay, Start 1 Relay

ABS 2 40A ESC Module

IG 1 40A W/O Smart Key : Ignition Switch, With Smart Key : PDM 3 (IG1) Relay, PDM 2 (ACC) Relay

Maintenance

707

Engine compartment fuse panel (EMS BOX)Fuse Name Fuse rating Circuit Protected

F/PUMP 15A F/Pump Relay

ECU 4 15A ECM/PCM

A/CON 10A A/CON COMP Relay

INJECTOR 10A Injector #1/#2/#3/#4, F/Pump Relay, A/CON COMP Relay

ECU 2 10A ECM/PCM

IGN COIL 1 20A Ignition Coil #1/#2/#3/#4, Condenser

SPARE 20A -

SENSOR 2 10A Oxygen Sensor (Up), Oxygen Sensor (Down), Variable Intake Solenoid Valve, Oil Control Valve #1/#2 PurgeControl Solenoid Valve, Canister Close Valve, E/R Fuse & Relay Box (C/Fan 1 Relay, C/Fan 2 Relay)

SENSOR 1 10A Camshaft Position Sensor #1/#2

7 71

Maintenance

APPEARANCE CAREExterior careExterior general caution It is very important to follow the labeldirections when using any chemicalcleaner or polish. Read all warningand caution statements that appearon the label.

Finish maintenanceWashing To help protect your vehicle’s finishfrom rust and deterioration, wash itthoroughly and frequently at leastonce a month with lukewarm or coldwater.If you use your vehicle for off-roaddriving, you should wash it after eachoff-road trip. Pay special attention tothe removal of any accumulation ofsalt, dirt, mud, and other foreignmaterials. Make sure the drain holesin the lower edges of the doors androcker panels are kept clear andclean.Insects, tar, tree sap, bird droppings,industrial pollution and similardeposits can damage your vehicle’sfinish if not removed immediately.Even prompt washing with plainwater may not completely remove allthese deposits. A mild soap, safe foruse on painted surfaces, may beused.

After washing, rinse the vehicle thor-oughly with lukewarm or cold water.Do not allow soap to dry on the fin-ish.After washing the vehicle, test thebrakes while driving slowly to see ifthey have been affected by water. Ifbraking performance is impaired, drythe brakes by applying them lightlywhile maintaining a slow forwardspeed.

CAUTION - HeadlightLens

To prevent damage, do notclean headlight lens with chem-ical solvents or strong deter-gents.

Maintenance

727

WaxingWax the vehicle when water will nolonger bead on the paint.Always wash and dry the vehiclebefore waxing. Use a good qualityliquid or paste wax, and follow themanufacturer’s instructions. Wax allmetal trim to protect it and to main-tain its luster.Removing oil, tar, and similar materi-als with a spot remover will usuallystrip the wax from the finish. Be sureto re-wax these areas even if the restof the vehicle does not yet need wax-ing.

CAUTION - Wetting engine• Water washing in the engine

compartment including highpressure water washing maycause the failure of electricalcircuits located in the enginecompartment.

• Never allow water or other liq-uids to come in contact withelectrical/electronic compo-nents inside the vehicle asthis may damage them.

OJB037800

CAUTION - Drying vehicle• Wiping dust or dirt off the

body with a dry cloth willscratch the finish.

• Do not use steel wool, abra-sive cleaners, or strong deter-gents containing highly alka-line or caustic agents onchrome-plated or anodizedaluminum parts. This mayresult in damage to the protec-tive coating and cause discol-oration or paint deterioration.

7 73

Maintenance

Finish damage repair Deep scratches or stone chips in thepainted surface must be repairedpromptly. Exposed metal will quicklyrust and may develop into a majorrepair expense.If your vehicle is damaged andrequires any metal repair or replace-ment, be sure the body shop appliesanti-corrosion materials to the partsrepaired or replaced.

Bright-metal maintenance• To remove road tar and insects,

use a tar remover, not a scraper orother sharp object.

• To protect the surfaces of bright-metal parts from corrosion, apply acoating of wax or chrome preser-vative and rub to a high luster.

• During winter weather or in coastalareas, cover the bright metal partswith a heavier coating of wax orpreservative. If necessary, coat theparts with non-corrosive petroleumjelly or other protective compound.

Underbody maintenanceCorrosive materials used for ice andsnow removal and dust control maycollect on the underbody. If thesematerials are not removed, acceler-ated rusting can occur on underbodyparts such as the fuel lines, frame,floor pan and exhaust system, eventhough they have been treated withrust protection.Thoroughly flush the vehicle under-body and wheel openings with luke-warm or cold water once a month,after off-road driving and at the endof each winter. Pay special attentionto these areas because it is difficultto see all the mud and dirt. It will domore harm than good to wet downthe road grime without removing it.The lower edges of doors, rockerpanels, and frame members havedrain holes that should not beallowed to clog with dirt; trappedwater in these areas can cause rust-ing.

Aluminum or chrome wheel main-tenance The aluminum or chrome wheels arecoated with a clear protective finish.• Do not use any abrasive cleaner,

polishing compound, solvent, orwire brushes on aluminum orchrome wheels. They may scratchor damage the finish.

• Clean the wheel when it hascooled.

• Use only a mild soap or neutraldetergent, and rinse thoroughlywith water. Also, be sure to cleanthe wheels after driving on saltedroads. This helps prevent corro-sion.

• Avoid washing the wheels withhigh-speed car wash brushes.

• Do not use any alkaline or aciddetergent. It may damage and cor-rode the aluminum or chromewheels coated with a clear protec-tive finish.

Maintenance

747

Corrosion protectionProtecting your vehicle from corro-sionBy using the most advanced designand construction practices to combatcorrosion, we produce vehicles ofthe highest quality. However, this isonly part of the job. To achieve thelong-term corrosion resistance yourvehicle can deliver, the owner'scooperation and assistance is alsorequired.

Common causes of corrosionThe most common causes of corro-sion on your vehicle are:• Road salt, dirt and moisture that is

allowed to accumulate underneaththe vehicle.

• Removal of paint or protectivecoatings by stones, gravel, abra-sion or minor scrapes and dentswhich leave unprotected metalexposed to corrosion.

High-corrosion areasIf you live in an area where your vehi-cle is regularly exposed to corrosivematerials, corrosion protection isparticularly important. Some of thecommon causes of accelerated cor-rosion are road salts, dust controlchemicals, ocean air and industrialpollution.

Moisture breeds corrosionMoisture creates the conditions inwhich corrosion is most likely tooccur. For example, corrosion isaccelerated by high humidity, partic-ularly when temperatures are justabove freezing. In such conditions,the corrosive material is kept in con-tact with the vehicle surfaces bymoisture that is slow to evaporate.Mud is particularly corrosivebecause it dries slowly and holdsmoisture in contact with the vehicle.Although the mud appears to be dry,it can still retain the moisture andpromote corrosion.

High temperatures can also acceler-ate corrosion of parts that are notproperly ventilated so the moisturecan be dispersed. For all these rea-sons, it is particularly important tokeep your vehicle clean and free ofmud or accumulations of other mate-rials. This applies not only to the vis-ible surfaces but particularly to theunderside of the vehicle.

To help prevent corrosionYou can help prevent corrosion fromgetting started by observing the fol-lowing:

7 75

Maintenance

Keep your vehicle cleanThe best way to prevent corrosion isto keep your vehicle clean and freeof corrosive materials. Attention tothe underside of the vehicle is partic-ularly important.

• If you live in a high-corrosion area— where road salts are used, nearthe ocean, areas with industrialpollution, acid rain, etc.—, youshould take extra care to preventcorrosion. In winter, hose off theunderside of your vehicle at leastonce a month and be sure to cleanthe underside thoroughly whenwinter is over.

• When cleaning underneath thevehicle, give particular attention tothe components under the fendersand other areas that are hiddenfrom view. Do a thorough job; justdampening the accumulated mudrather than washing it away willaccelerate corrosion rather thanprevent it. Water under high pres-sure and steam are particularlyeffective in removing accumulatedmud and corrosive materials.

• When cleaning lower door panels,rocker panels and frame mem-bers, be sure that drain holes arekept open so that moisture canescape and not be trapped insideto accelerate corrosion.

Keep your garage dryDon't park your vehicle in a damp,poorly ventilated garage. This cre-ates a favorable environment for cor-rosion. This is particularly true if youwash your vehicle in the garage ordrive it into the garage when it is stillwet or covered with snow, ice ormud. Even a heated garage can con-tribute to corrosion unless it is wellventilated so moisture is dispersed.

Keep paint and trim in good condi-tionScratches or chips in the finishshould be covered with "touch-up"paint as soon as possible to reducethe possibility of corrosion. If baremetal is showing through, the atten-tion of a qualified body and paintshop is recommended.

Bird droppings : Bird droppings arehighly corrosive and may damagepainted surfaces in just a few hours.Always remove bird droppings assoon as possible.

Don't neglect the interiorMoisture can collect under the floormats and carpeting and cause corro-sion. Check under the mats periodi-cally to be sure the carpeting is dry.Use particular care if you carry fertil-izers, cleaning materials or chemi-cals in the car.These should be carried only inproper containers and any spills orleaks should be cleaned up, flushedwith clean water and thoroughlydried.

Maintenance

767

Interior careInterior general precautions Prevent chemicals such as perfume,cosmetic oil, sun cream, hand clean-er, and air freshener from contactingthe interior parts because they maycause damage or discoloration. Ifthey do contact the interior parts,wipe them off immediately. See theinstructions for the proper way toclean vinyl.

Cleaning the upholstery and inte-rior trim Vinyl Remove dust and loose dirt fromvinyl with a whisk broom or vacuumcleaner. Clean vinyl surfaces with avinyl cleaner.

Fabric Remove dust and loose dirt from fab-ric with a whisk broom or vacuumcleaner. Clean with a mild soap solu-tion recommended for upholstery orcarpets. Remove fresh spots imme-diately with a fabric spot cleaner. Iffresh spots do not receive immediateattention, the fabric can be stainedand its color can be affected. Also, itsfire-resistant properties can bereduced if the material is not proper-ly maintained.Using anything but recommendedcleaners and procedures may affectthe fabric’s appearance and fire-resistant properties.

CAUTION - Electrical components

Never allow water or other liq-uids to come in contact withelectrical/electronic compo-nents inside the vehicle as thismay damage them.

CAUTION - LeatherWhen cleaning leather products(steering wheel, seats etc.), useneutral detergents or low alco-hol content solutions. If you usehigh alcohol content solutionsor acid/alkaline detergents, thecolor of the leather may fade orthe surface may get stripped off.

7 77

Maintenance

Cleaning the lap/shoulder beltwebbing Clean the belt webbing with any mildsoap solution recommended forcleaning upholstery or carpet. Followthe instructions provided with thesoap. Do not bleach or re-dye thewebbing because this may weakenit.

Cleaning the interior windowglass If the interior glass surfaces of thevehicle become fogged (that is, cov-ered with an oily, greasy or waxyfilm), they should be cleaned withglass cleaner. Follow the directionson the glass cleaner container.

CAUTION - Rear windowsDo not scrape or scratch theinside of the rear window. Thismay result in damage to the rearwindow defroster grid.

Maintenance

787

EMISSION CONTROL SYSTEMThe emission control system of yourvehicle is covered by a written limitedwarranty. Please see the warrantyinformation contained in theWarranty & Consumer Informationmanual in your vehicle.Your vehicle is equipped with anemission control system to meet allapplicable emission regulations.There are three emission controlsystems, as follows.

(1) Crankcase emission control sys-tem

(2) Evaporative emission control sys-tem

(3) Exhaust emission control system

In order to assure the proper functionof the emission control systems, it isrecommended that you have yourvehicle inspected and maintained byan authorized Kia dealer in accor-dance with the maintenance sched-ule in this manual.

Caution for the Inspection andMaintenance Test (With ElectronicStability Control (ESC) system)• To prevent the vehicle from mis-

firing during dynamometer test-ing, turn the Electronic StabilityControl (ESC) system off bypressing the ESC switch.

• After dynamometer testing iscompleted, turn the ESC systemback on by pressing the ESCswitch again.

1. Crankcase emission controlsystem

The positive crankcase ventilationsystem is employed to prevent airpollution caused by blow-by gasesbeing emitted from the crankcase.This system supplies fresh filtered airto the crankcase through the airintake hose. Inside the crankcase,the fresh air mixes with blow-bygases, which then pass through thePCV valve into the induction system.

2. Evaporative emission con-trol (including ORVR:Onboard Refueling VaporRecovery) system

The Evaporative Emission ControlSystem is designed to prevent fuelvapors from escaping into the atmos-phere.(The ORVR system is designed toallow the vapors from the fuel tank tobe loaded into a canister while refu-eling at the gas station, preventingthe escape of fuel vapors into theatmosphere.)

7 79

Maintenance

CanisterFuel vapors generated inside the fueltank are absorbed and stored in theonboard canister. When the engine isrunning, the fuel vapors absorbed inthe canister are drawn into the surgetank through the purge control sole-noid valve.

Purge Control Solenoid Valve(PCSV)The purge control solenoid valve iscontrolled by the Engine ControlModule (ECM); when the enginecoolant temperature is low duringidling, the PCSV closes so that evap-orated fuel is not taken into theengine. After the engine warms upduring ordinary driving, the PCSVopens to introduce evaporated fuel tothe engine.

3. Exhaust emission control system

The Exhaust Emission ControlSystem is a highly effective systemwhich controls exhaust emissionswhile maintaining good vehicle per-formance.

Vehicle modifications This vehicle should not be modified.Modification of your vehicle couldaffect its performance, safety ordurability and may even violate gov-ernmental safety and emissions reg-ulations.In addition, damage or performanceproblems resulting from any modifi-cation may not be covered underwarranty.• If you use unauthorized electronic

devices, it may cause the vehicle tooperate abnormally, wire damage,battery discharge and fire. For yoursafety, do not use unauthorizedelectronic devices.

Engine exhaust gas precautions(carbon monoxide) • Carbon monoxide can be present

with other exhaust fumes.Therefore, if you smell exhaustfumes of any kind inside your vehi-cle, have it inspected and repairedimmediately. If you ever suspectexhaust fumes are coming intoyour vehicle, drive it only with allthe windows fully open. Have yourvehicle checked and repairedimmediately.

WARNING - ExhaustEngine exhaust gases containcarbon monoxide (CO). Thoughcolorless and odorless, it isdangerous and could be lethal ifinhaled. Follow the instructionson this page to avoid CO poi-soning.

Maintenance

807

• Do not operate the engine in con-fined or closed areas (such asgarages) any more than what isnecessary to move the vehicle in orout of the area.

• When the vehicle is stopped in anopen area for more than a shorttime with the engine running,adjust the ventilation system (asneeded) to draw outside air into thevehicle.

• Never sit in a parked or stoppedvehicle for any extended time withthe engine running.

• When the engine stalls or fails tostart, excessive attempts to restartthe engine may cause damage tothe emission control system.

Operating precautions for catalyt-ic converters (if equipped)

Your vehicle is equipped with a cat-alytic converter emission controldevice.Therefore, the following precautionsmust be observed:

• Use only UNLEADED FUEL forgasoline engines.

• Do not operate the vehicle whenthere are signs of engine malfunc-tion, such as misfire or a noticeableloss of performance.

• Do not misuse or abuse theengine. Examples of misuse arecoasting with the ignition off anddescending steep grades in gearwith the ignition off.

• Do not operate the engine at highidle speed for extended periods (5minutes or more).

• Do not modify or tamper with anypart of the engine or emission con-trol system. All inspections andadjustments must be made by anauthorized Kia dealer.

• Avoid driving with a extremely lowfuel level. Running out of fuel couldcause the engine to misfire, dam-aging the catalytic converter.

Failure to observe these precautionscould result in damage to the catalyt-ic converter and to your vehicle.Additionally, such actions could voidyour warranties.

WARNING - Fire• Do not park, idle or drive the

vehicle over or near flamma-ble objects, such as grass,vegetation, paper, leaves, etc.A hot exhaust system canignite flammable items underyour vehicle.

• Also, do not remove the heatsink around the exhaust sys-tem, do not seal the bottom ofthe vehicle or do not coat thevehicle for corrosion control.It may present a fire risk undercertain conditions.

WARNING - Catalytic converter

Keep away from the catalyticconverter and exhaust systemwhile the vehicle is running orimmediately thereafter. Theexhaust and catalytic systemsare very hot and may burn you.


8

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2Bulb wattage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3Tires and wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4Weight/volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5Recommended lubricants and capacities. . . . . . . . 8-6

• Recommended sae viscosity number . . . . . . . . . . . . 8-8Vehicle identification number (VIN) . . . . . . . . . . . 8-9Vehicle certification label. . . . . . . . . . . . . . . . . . . . . 8-9Tire specification and pressure label . . . . . . . . . . 8-10Engine number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10Refrigerant label. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10


28

ENGINE

Item 1.8 MPI 2.0 GDI

Displacement [cc (cu. in)]

1,797(109.66)

1.999(121.99)

Bore x Stroke

[mm (in.)]81 x 87.2

(3.19 x 3.43)81 x 97

(3.19 x 3.82)

Firing order 1 → 3 → 4 → 2 1 → 3 → 4 → 2

No. of cylinders 4, In-line 4, In-line

DIMENSIONSItem mm ( in)

Overall length 4,560 ( 179.5)Overall width 1,780 ( 70.1)Overall height 1,435 (56.5)

Front tread

P195/65 R15 (Steel) 1,563 (61.5)P205/55 R16 (Steel) 1,553 (61.1)

P205/55 R16 1,555 (61.2)P215/45 R17 1,557 (61.3)

Rear tread

P195/65 R15 (Steel) 1,576 (62.0)P205/55 R16 (Steel) 1,566 (61.6)

P205/55 R16 1,568 (61.7)P215/45 R17 1,570 (61.8)

Wheelbase 2,700 (106.3)

8 3


BULB WATTAGELight Bulb Wattage Bulb type

Front

Headlamps(Low) 55 H11Headlamps(Low)- HID * 25 D8SHeadlamps(High) 55 H1Front turn signal lamps 28 PY28W/8WFront position lamps * 5 PY28W/8WFront position lamps (LED type)* LED LEDFront fog lamps * 35 H8Side Repeater lamps 5 WY5WSide Repeater lamps (Outside Mirror) * LED LEDDaytime running lamps * 55 H1Side marker 5 W5W

Rear

Bulbtype

Rear Stop/Tail lamps (outside) 28/8 PY28/8Rear tail lamps (Inside) 8 P28/8

LEDtype

Rear Stop/Tail lamps (outside) LED LEDRear Stop/tail lamps (Inside) LED LED

Rear turn signal lamps 27 PY27WBack-up lamps 16 W16WBulb type

High mounted stop lamp21 P21W

LED type LED LEDLicense plate lamps 5 W5W

Interior

Map lamps * 8 FESTOONRoom lamps 8 FESTOONVanity mirror lamps * 5 FESTOONTrunk room lamp * 5 FESTOONGlove box lamp 5 FESTOON

* : If equipped


48

TIRES AND WHEELS

CAUTIONUsing tires of a different size may damage the related parts or cause them to operate improperly.

*1 : Normal load : Up to 3 persons

*2 : If your vehicle is not equipped with a compact spare tire, it will be equipped with a Tire Mobility Kit

Item Tire size Wheel size

Inflation pressure kPa (psi)Wheel lug nut torque

kg•m (lb•ft, N•m)Normal load *1 Maximum load

Front Rear Front Rear

Full size tire

P195/65R15 89T 6.0J X15

220 (32) 220 (32) 220 (32) 220 (32) 9~11

(65~79, 88~107)

P205/55R16 89H 6.5J X16

P215/45R17 87H 7.0J X17

Compact spare tire *2 T125/80D15 95M 4.0T×15 420 (60) 420 (60) 420 (60) 420 (60)

8 5


WEIGHT/VOLUME

Item1.8 MPI Engine 2.0 GDI Engine

Manual transaxle Automatic transaxle Manual transaxle Automatic transaxle

Gross vehicle weight kg (lbs.)

1,740 (3,836) 1,760 (3,880) 1,750 (3,858) 1,770 (3,902)

Luggage volumel (cu ft)

421 (14.9)


68

RECOMMENDED LUBRICANTS AND CAPACITIESTo help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.The correct lubricants also help promote engine efficiency that results in improved fuel economy.These lubricants and fluids are recommended for use in your vehicle.

Lubricant Volume Classification

Engine oil *1 *2 (drain and refill)Recommends 4.0 l

(4.23 US qt.)API Service SM,

ILSAC GF-4 or above*3

Manual transaxle fluid1.8 l

(2.0~2.1 US qt.)API GL-4, SAE 75W/85, fill for-life

Automatic transaxle fluid7.1 l

(7.5 US qt.)MICHANG ATF SP-IV, SK ATF SP-IV

NOCA ATF SP-IV, Kia genuine ATF SP-IV

Coolant Manual transaxle 6.0 l (6.34 US qt.) Mixture of antifreeze and water

(Ethylene glycol base coolant for aluminum radiator)Automatic transaxle 5.9 l (6.23 US qt.)

8 7


*1 Refer to the recommended SAE viscosity numbers on the next page.*2 Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ-

omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measurein everyday driving, but in a year’s time, they can offer significant cost and energy savings.

*3 If the API service SM engine oil is not available in your country, you are able to use API service SL.

Lubricant Volume Classification

Brake/clutch fluid0.7~0.8 l

(0.7~0.8 US qt.)FMVSS116 DOT-3 or DOT-4

Fuel 50 l (13.2 US gal.) Unleaded gasoline


88

Recommended SAE viscositynumber Always be sure to clean the areaaround any filler plug, drain plug, ordipstick before checking or drainingany lubricant. This is especiallyimportant in dusty or sandy areasand when the vehicle is used onunpaved roads. Cleaning the plugand dipstick areas will prevent dirtand grit from entering the engine andother mechanisms that could bedamaged.

Engine oil viscosity (thickness) hasan effect on fuel economy and coldweather operation (engine start andengine oil flowability). Lower viscosi-ty engine oils can provide better fueleconomy and cold weather perform-ance, however, higher viscosityengine oils are required for satisfac-tory lubrication in hot weather.

Using oils of any viscosity other thanthose recommended could result inengine damage. When choosing anoil, consider the range of tempera-ture your vehicle will be operated inbefore the next oil change. Proceedto select the recommended oil vis-cosity from the chart.

Temperature Range for SAE Viscosity Numbers

Temperature

Engine Oil *1

°C(°F)

-30 -20 -10 0 10 20 30 40 50-10 0 20 40 60 80 100 120

10W-30

5W-20, 5W-30

*1 For better fuel economy, it is recommended to use theengine oil of a viscosity grade SAE 5W-20 (API SM / ILSACGF-4). However, if the engine oil is not available in yourcountry, select the proper engine oil using the engine oil vis-cosity chart.

8 9


VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number(VIN) is the number used in register-ing your vehicle and in all legal mat-ters pertaining to its ownership, etc.

VIN labelThe VIN is also on a plate attachedto the top of the dashboard. Thenumber on the plate can easily beseen through the windshield fromoutside.

The vehicle certification labelattatched on the driver’s side centerpillar gives the vehicle identificationnumber (VIN).

OVQ076002N

VIN Label

OMD080001

OFS080002

VEHICLE CERTIFICATION-LABELFrame Number


108

The tires supplied on your new vehi-cle are chosen to provide the bestperformance for normal driving.The tire label located on the driver'sside center pillar gives the tire pres-sures recommended for your vehicle.

The engine number is stamped onthe engine block as shown in thedrawing.

TIRE SPECIFICATION ANDPRESSURE LABEL

OMD0620012N

ENGINE NUMBER

OMD083003N

Index

II

Index

2I

Active eco system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40Air bag-supplemental restraint system . . . . . . . . . . . . . 3-33

Air bag warning label. . . . . . . . . . . . . . . . . . . . . . . . 3-55Air bag warning light . . . . . . . . . . . . . . . . . . . . . . . . 3-36Ari bag system operation . . . . . . . . . . . . . . . . . . . . . 3-34Curtain air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48Do not install a child restraint on a front passenger’s

seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35Driver’s and passenger’s front air bag . . . . . . . . . . . 3-44Inflation/non-inflation conditions of air bag . . . . . . 3-49Occupant detection system. . . . . . . . . . . . . . . . . . . . 3-39Side air bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-47SRS Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54SRS components and functions . . . . . . . . . . . . . . . . 3-37

Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36Filter replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36

Appearance care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71Exterior care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71Interior care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-76

Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-144Aux, USB and iPod® port . . . . . . . . . . . . . . . . . . . 4-146Glass antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-144Steering wheel audio control . . . . . . . . . . . . . . . . . 4-145

Automatic climate control system . . . . . . . . . . . . . . . 4-117Automatic heating and air conditioning. . . . . . . . . 4-118Manual heating and air conditioning . . . . . . . . . . . 4-119

System operation . . . . . . . . . . . . . . . . . . . . . . . . . . 4-125Automatic transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Automatic transaxle operation . . . . . . . . . . . . . . . . . 5-16

Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-41Battery recharging . . . . . . . . . . . . . . . . . . . . . . . . . . 7-43For best battery service . . . . . . . . . . . . . . . . . . . . . . 7-41Reset items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-43

Before driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Brake system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22

Anti-lock brake system (ABS). . . . . . . . . . . . . . . . . 5-25Electronic stability control (ESC) . . . . . . . . . . . . . . 5-27Hill-start assist control (HAC) . . . . . . . . . . . . . . . . . 5-31Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23Power brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22Vehicle stability management (VSM) . . . . . . . . . . . 5-31

Brake/clutch fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-34Checking the brake/clutch fluid level . . . . . . . . . . . 7-34

Bulb wattage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Child restraint system . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26Lower anchor ststem . . . . . . . . . . . . . . . . . . . . . . . . 3-31Tether Anchor system. . . . . . . . . . . . . . . . . . . . . . . . 3-30Using a child restraint system . . . . . . . . . . . . . . . . . 3-27

A

B

C

I 3

Index

Climate control air filter . . . . . . . . . . . . . . . . . . . . . . . . 7-37Filter inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37

Cruise control system . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35

Defroster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106Front wiper deicer . . . . . . . . . . . . . . . . . . . . . . . . . 4-106Rear window defroster . . . . . . . . . . . . . . . . . . . . . . 4-106

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2Door locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Auto door lock/unlock feature . . . . . . . . . . . . . . . . . 4-20Child-protector rear door lock . . . . . . . . . . . . . . . . . 4-21From inside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18From outside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18Impact sensing door unlock system . . . . . . . . . . . . . 4-20Speed sensing door lock system . . . . . . . . . . . . . . . 4-21

Economical operation . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41Emergency starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

If the engine overheats . . . . . . . . . . . . . . . . . . . . . . . . 6-7Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Push-starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Emission control system. . . . . . . . . . . . . . . . . . . . . . . . 7-78Crankcase emission control system . . . . . . . . . . . . . 7-78

Evaporative emission control(including ORVR: Onboard Refueling VaporRecovery) system . . . . . . . . . . . . . . . . . . . . . . . . . 7-78

Exhaust emission control system . . . . . . . . . . . . . . . 7-79Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . 2-6, 7-3Engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31

Changing the coolant . . . . . . . . . . . . . . . . . . . . . . . . 7-33Checking the coolant level . . . . . . . . . . . . . . . . . . . . 7-31

Engine number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-29

Changing the engine oil and filter . . . . . . . . . . . . . . 7-30Checking the engine oil level . . . . . . . . . . . . . . . . . 7-29

Engine start/stop button . . . . . . . . . . . . . . . . . . . . . . . . . 5-7ENGINE START/STOP button position . . . . . . . . . . 5-7Illuminated ENGINE START/STOP button . . . . . . . 5-7

Explanation of scheduled maintenance items . . . . . . . 7-25Exterior overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Fuel filler lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31Closing the fuel filler lid . . . . . . . . . . . . . . . . . . . . . 4-31Opening the fuel filler lid. . . . . . . . . . . . . . . . . . . . . 4-31

Fuel requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Do not use methanol . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Fuel Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Gasoline containing alcohol and methanol . . . . . . . . 1-3

D

EF

Index

4I

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58Engine compartment fuse panel. . . . . . . . . . . . . . . . 7-64Engine compartment fuse replacement . . . . . . . . . . 7-61Engine room (Battery terminal cover) . . . . . . . . . . . 7-65Fuse/relay panel description. . . . . . . . . . . . . . . . . . . 7-63Instrument panel fuse replacement . . . . . . . . . . . . . 7-59

Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29Closing the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30Opening the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

If the engine will not start . . . . . . . . . . . . . . . . . . . . . . . 6-4If engine doesn't turn over or turns over slowly . . . . 6-4If engine turns over normally but does not start . . . . 6-4

If you have a flat tire (with spare tire) . . . . . . . . . . . . . 6-14Changing tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15Jack and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14Removing and storing the spare tire . . . . . . . . . . . 6-15

If you have a flat tire (with tire mobility kit) . . . . . . . . . 6-8Components of the TireMobilityKit. . . . . . . . . . . . . 6-10Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Notes on the safe use of the Tire Mobility Kit . . . . . 6-9Using the Tire Mobility Kit . . . . . . . . . . . . . . . . . . . 6-11

In case of an emergency while driving. . . . . . . . . . . . . . 6-3If engine stalls while driving . . . . . . . . . . . . . . . . . . . 6-3If the engine stalls at a crossroad or crossing . . . . . . 6-3If you have a flat tire while driving . . . . . . . . . . . . . . 6-3

Instrument cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-54Instrument Cluster Control. . . . . . . . . . . . . . . . . . . . 4-53LCD Display Control . . . . . . . . . . . . . . . . . . . . . . . . 4-54Transaxle Shift Indicator . . . . . . . . . . . . . . . . . . . . . 4-57

Instrument panel overview . . . . . . . . . . . . . . . . . . . . . . . 2-5Interior features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135

Ashtray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135Cigarette lighter . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-135Climate control seat . . . . . . . . . . . . . . . . . . . . . . . . 4-139Clothes hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-142Cup holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136Floor mat anchor(s) . . . . . . . . . . . . . . . . . . . . . . . . 4-142LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-141Navigation system . . . . . . . . . . . . . . . . . . . . . . . . . 4-143Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-140Seat warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-137Sliding armrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136Sunvisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-137

Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101Automatict turn off function . . . . . . . . . . . . . . . . . 4-101Glove box lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103Map lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101Room lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-102

H

I

I 5

Index

Trunk room lamp . . . . . . . . . . . . . . . . . . . . . . . . . . 4-103Vanity mirror lamp . . . . . . . . . . . . . . . . . . . . . . . . . 4-104

Interior overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Key positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Key operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Record your key number . . . . . . . . . . . . . . . . . . . . . . 4-4

LCD display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58A/V Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63LCD Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-59Turn By Turn Mode . . . . . . . . . . . . . . . . . . . . . . . . . 4-63User Settings Mode . . . . . . . . . . . . . . . . . . . . . . . . . 4-60Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 4-64

Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93Battery saver function . . . . . . . . . . . . . . . . . . . . . . . 4-93Daytime running light . . . . . . . . . . . . . . . . . . . . . . . 4-94Front fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-98Headlamp escort function . . . . . . . . . . . . . . . . . . . . 4-93High - beam operation . . . . . . . . . . . . . . . . . . . . . . . 4-96Lighting control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-94Turn signals and lane change signals. . . . . . . . . . . . 4-97

Maintenance services . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4Owner maintenance precautions . . . . . . . . . . . . . . . . 7-5Owner’s responsibility . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Manual climate control system. . . . . . . . . . . . . . . . . . 4-107Climate control air filter. . . . . . . . . . . . . . . . . . . . . 4-115Heating and air conditioning . . . . . . . . . . . . . . . . . 4-108Refrigerant and compressor lubricant . . . . . . . . . . 4-116System operation . . . . . . . . . . . . . . . . . . . . . . . . . . 4-113

Manual transaxle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13Manual transaxle operation . . . . . . . . . . . . . . . . . . . 5-13

Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43Inside rearview mirror . . . . . . . . . . . . . . . . . . . . . . . 4-43Outside rearview mirror . . . . . . . . . . . . . . . . . . . . . . 4-48

Owner maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6Owner maintenance schedule. . . . . . . . . . . . . . . . . . . 7-6

Parking assist system . . . . . . . . . . . . . . . . . . . . . . . . . . 4-86Non-operational conditions . . . . . . . . . . . . . . . . . . . 4-89Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87Self-diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91

K

L

M

O

P

Index

6I

Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35Checking the parking brake . . . . . . . . . . . . . . . . . . 7-35

Rearview camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-92Recommended lubricants and capacities . . . . . . . . . . . . 8-8

Recommended sae viscosity number . . . . . . . . . . . 8-6Refrigerant label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10Remote keyless entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . 4-11Immobilizer system . . . . . . . . . . . . . . . . . . . . . . . . . 4-12Remote keyless entry system operations . . . . . . . . . . 4-9Transmitter precautions . . . . . . . . . . . . . . . . . . . . . . 4-10

Road warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Hazard warning flasher . . . . . . . . . . . . . . . . . . . . . . 6-2

Scheduled maintenance service . . . . . . . . . . . . . . . . . . . 7-8Maintenance under severe usage conditions . . . . . . 7-23Normal maintenance schedule . . . . . . . . . . . . . . . . . 7-10

Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Driver position memory system. . . . . . . . . . . . . . . . . 3-8Folding the rear seat . . . . . . . . . . . . . . . . . . . . . . . . . 3-14Front seat adjustment - Manual . . . . . . . . . . . . . . . . . 3-4Front seat adjustment - Power . . . . . . . . . . . . . . . . . . 3-6Headrest (Front seat) . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Headrest (Rear seat) . . . . . . . . . . . . . . . . . . . . . . . . . 3-11Rear seat adjustment . . . . . . . . . . . . . . . . . . . . . . . . 3-11Seatback pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Seat belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16Care of seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25Pre-tensioner seat belt . . . . . . . . . . . . . . . . . . . . . . . 3-20Seat belt (3-point system) . . . . . . . . . . . . . . . . . . . . 3-17Seat belt precautions . . . . . . . . . . . . . . . . . . . . . . . . 3-23Seat belt warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Smart key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Smart key function . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Special driving conditions . . . . . . . . . . . . . . . . . . . . . . 5-43Driving at night . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44Driving in flooded areas. . . . . . . . . . . . . . . . . . . . . . 5-45Driving in the rain . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45Driving off-road . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46Hazardous driving conditions . . . . . . . . . . . . . . . . . 5-43Highway driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46Rocking the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 5-43Smooth cornering . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44

Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38

Electronic power steering. . . . . . . . . . . . . . . . . . . . . 4-38Flex steer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40Heated steering wheel . . . . . . . . . . . . . . . . . . . . . . . 4-40Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39Tilt & telescopic steering . . . . . . . . . . . . . . . . . . . . . 4-39

R

S

I 7

Index

Storage compartment . . . . . . . . . . . . . . . . . . . . . . . . . 4-132Center console storage . . . . . . . . . . . . . . . . . . . . . . 4-132Cool box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-133Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-132Sunglass holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-133

Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34Resetting the sunroof . . . . . . . . . . . . . . . . . . . . . . . . 4-37Sliding the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35Sunroof open warning . . . . . . . . . . . . . . . . . . . . . . . 4-34Sunshade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36Tilting the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36

Theft-alarm system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15Armed stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15Disarmed stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16Theft-alarm stage . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Tire specification and pressure label . . . . . . . . . . . . . . 8-10Tires and wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-44

All season tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55Checking tire inflation pressure . . . . . . . . . . . . . . . . 7-45Low aspect raito tire. . . . . . . . . . . . . . . . . . . . . . . . . 7-56Radial-ply tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56Recommended cold tire inflation pressures . . . . . . 7-44Snow tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55Summer tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55Tire care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-44

Tire maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49Tire replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-48Tire rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-46Tire sidewall labeling . . . . . . . . . . . . . . . . . . . . . . . . 7-49Tire traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49Wheel alignment and tire balance . . . . . . . . . . . . . . 7-47Wheel replacement. . . . . . . . . . . . . . . . . . . . . . . . . . 7-49

Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22Emergency towing . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23Removable towing hook. . . . . . . . . . . . . . . . . . . . . . 6-23Towing service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22

Trailer towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71

Fuel Economy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-72Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71Trip A/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73

Trunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22Closing the trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23Emergency trunk safety release . . . . . . . . . . . . . . . . 4-23Opening the trunk. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Vehicle break-in process . . . . . . . . . . . . . . . . . . . . . . . . . 1-5Vehicle certification label . . . . . . . . . . . . . . . . . . . . . . . . 8-9Vehicle identification number (VIN) . . . . . . . . . . . . . . . 8-9Vehicle load limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50

Certification label . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-53

V

T

Index

8I

Tire and loading information label. . . . . . . . . . . . . . 5-50Vehicle weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55

Base curb weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55Cargo weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55GAW (Gross axle weight) . . . . . . . . . . . . . . . . . . . . 5-55GAWR (Gross axle weight rating). . . . . . . . . . . . . . 5-55GVW (Gross vehicle weight). . . . . . . . . . . . . . . . . . 5-55GVWR (Gross vehicle weight rating) . . . . . . . . . . . 5-55Vehicle curb weight . . . . . . . . . . . . . . . . . . . . . . . . . 5-55

Warning and indicator lights. . . . . . . . . . . . . . . . . . . . . 4-75Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-81Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-75

Washer fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35Checking the washer fluid level . . . . . . . . . . . . . . . 7-35

Weight/volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5Welcome system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105

Headlamp welcome . . . . . . . . . . . . . . . . . . . . . . . . 4-105Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105Puddle lamp and pocket lamp . . . . . . . . . . . . . . . . 4-105

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Windshield defrosting and defogging. . . . . . . . . . . . . 4-127Automatic climate control system . . . . . . . . . . . . . 4-128Defogging logic . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-129Manual climate control system . . . . . . . . . . . . . . . 4-127

Winter driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47Wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38

Blade inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38Blade replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38

Wipers and washers . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-99Windshield washers . . . . . . . . . . . . . . . . . . . . . . . . . 4-99Windshield wipers . . . . . . . . . . . . . . . . . . . . . . . . . . 4-99

W

Documents

2014 Forte Owner's Manual - Kia Canada