17
1 1/22/2014 Reset Installation Guide D25 Commercial Door Hardware New Set 2014 Commercial Door Hardware 4’ Set THIS RIG IS PROPRIETARY AND CONFIDENTIAL INFORMATION Old Set

2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

  • Upload
    vanlien

  • View
    247

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

1 1/22/2014

Reset Installation Guide

D25 – Commercial Door Hardware

New Set

2014 Commercial Door Hardware 4’ Set

THIS RIG IS PROPRIETARY AND CONFIDENTIAL INFORMATION

Old Set

Page 2: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

2

This Reset is to add 4’ of Crown Bolt Commercial Door Hardware products into Home Depot stores. This is a 253 store rollout to replace Schlage/Ives (Kickplates, Door Knockers, etc..) with Everbilt items removing existing fixtures and installing new set.

Buyback - 10 SKUs (see list on page 6 and Scan sheet on page 7) New SKUs - 18 (see list on page 15) New Merchaids - 4 For every Store (Select stores may get other supporting merchaids (see list on page 4) Planogram Name - 1 Bay - 48 - Commercial Door Hardware_2014 V06 839925 - 1 Bay - 99 - Commercial Door Hardware_2014 V05 839924 - THD_Commercial Door Hardware_75in_2014_V04 839926 Time to Reset - 6 hrs per store

THIS RIG IS PROPRIETARY AND CONFIDENTIAL INFORMATION

Contacts C.R. Trammell [email protected] 949-701-2554 Dorthe Smith [email protected] 949-643-4775 John Sarkis [email protected] 949-643-4427 Barry Boatwright [email protected] 404-653-5444

2014 Commercial Door Hardware 4’ Set General Information Reset Installation Guide

1/22/2014

Page 3: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Shipping Guidelines: The Merchaids and Product will arrive on 1 pallet, shrink wrapped in blue with a “Hold for Crown Bolt Reset” placard placed on the pallet. Some stores will need a versa post. This will be sent into the store on the Crown Bolt normal Rod &Steel product pallet. The Crown Bolt rep should be removing this and placing in the overhead of the CDH Bay.

Shipping Information

1/22/2014 3

Page 4: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

4

Pre-Installation Information Reset Installation Guide

You will need the following tools to complete this installation. Cordless Drill, Mobile Ordering Cart, Gloves, Socket Set

Tools Needed to Begin Installation

Merchaids and Product will arrive prior to the reset and will be wrapped in Blue Shrink Wrap with “Hold for Crown Bolt” sign

Unpack of New Merchaid Items

THIS RIG IS PROPRIETARY AND CONFIDENTIAL INFORMATION

Crown Bolt UPC Crown Bolt Part

# Description Qty Special Comments

030699955954 95595 CW-42x96 WALL W/GRAY PEGBOARD 1

030699182558 18255 CW-ARM EXTENSION 8in Optional Only need when bay is 42" deep

030699182565 18256 CW-ARM EXTENSION 14in Optional Only need when bay is 48" deep

030699956050 95605 RACK-SMAL BIN FOR PEGWALL ONLY 3

030699956258 95625 PEGHK-SCNR HD 3 PRONG BACK 8" 6 To be used for Kickplates sku's only

030699160198 16019 PEGHK-SCNR HK SML LOOP ZINC 8 13 Used on all peg items except Kickplates

030699901852 90185 96" VERSA POST SILVER Optional Select Stores

030699962259 96225 VERSA POST BOTTOM CLIP W/HDW Optional Select Stores

030699901869 90186 VERSA SHELF-24in Optional Select Stores

030699901876 90187 VERSA SHELF-30in Optional Select Stores

030699901890 90189 VERSA SHELF-36in Optional Select Stores

030699901906 90190 VERSA SHELF-42in Optional Select Stores

030699935055 93505 VERSA SHELF-48in Optional Select Stores

1/22/2014

Page 5: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

5

Pre-Installation Information – Scope Of Work Reset Installation Guide

THIS RIG IS PROPRIETARY AND CONFIDENTIAL INFORMATION

Scope of Work for 4’ of Crown Bolt Commercial Door Hardware Reset Locate Pallet of Merchaids and Product. If versa is shipped in to the store it will arrive on the Crown Bolt normal Rod & Steel product shipping pallet. The versa is to be taken off this pallet and placed in overhead of the CDH bay by the CB Merchandiser prior to reset. Remove buy back and clearance items from the current set. Give buyback sheet to DH and process clearance items for store standards, pricing and placement. Remove and demo existing wood fixture. (remove any other fixture unless a metal pegwall) Remove Schlage or Ives sign from bay (or any other overhead signage in this 4’ of section in the store). Install new versa posts (if needed), 4’ Crownwall, Heavy Duty peg hooks (for kickplates), 10” loop peg hooks for other items and 3 baskets for cross merchandise items per POG. Locate new product and place per POG.

Note that the door closers are not new items. These are currently in the screen and storm bay. These will be merchandised in the current location and the new Commercial Door Hdw bay.

Place any excess products, labeled and striped, in the overhead above the bay. Print and place price tags for all items in the bay. Re-sequence bay with THD 1st Phone. Place POG in sleeve in upright per THD standards. Clean up area and dispose of trash properly. Obtain sign off and take pictures. Post on ISIS website.

1/22/2014

Page 6: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Buy back items in orange. Other items to be placed on clearance end cap. SKU Description

234348 Solid Doorstop Satin Nickel

235761 Solid Doorstop Aged Bronze

233728 Solid Doorstop BB

236326 Small Door Knocker Satin Nickel

236413 Small Door Knocker Aged Bronze

236169 Small Door Knocker BB

235780 Hinge Pin Doorstop SN

235789 Hinge Pin Doorstop Aged Bronze

235778 Hinge Pin Doorstop BB

292550 Chain Door Guard SN

292824 Chain Door Guard Aged Bronze

292476 Chain Door Guard BB

236573 120 Degree Door Viewer Brass

236545 Wide Angle Viewer SN

246784 4" Square Hinge SN 3pk

242875 3.5" Square Hinge SN 3pk

244855 3.5" 5/8 Rad SN 3pk

245095 3.5" 1/4 Rad SN 3pk

245876 3.5" 1/4 Rad Aged Bronze 3pk

292276 Mail Slot Satin Nickel

250303 4" Round Hinge SN 3pk

241450 3.5" Square Hinge BB 3pk

244690 3.5" 5/8 Rad BB 3pk

245092 3.5" 1/4 Rad BB 3pk

244918 3.5" 5/8 Rad Aged Bronze 3pk

292256 Mail Slot Brass

292328 Mail Slot Sleeve

SKU Description 281716 8x34 Kickplate SN 281830 8x34 Kickplate Aged Bronze 282120 8x34 Kickplate BB 281852 8x34 Kickplate Sat Aluminum 281681 6x34 Kickplate BB 252977 6x30 Kickplate BB 313858 3.5x15 Pull Plate Anodized Aluminum 313866 3.5x15 Push Plate Aluminum 282357 3.5x15 Push Plate BB 872400 3.5x15 Pull Plate BB

Buy back items in orange.

These items to be placed on clearance end cap. Get with Store personnel for pricing

instructions and location.

6

Clearance items

Page 7: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Buy back items Scan Sheet

SKU UPC CODE Description Quantity Barcode

252977 044074678567 6x30 Kickplate BB 044074678567

281681 044074678574 6x34 Kickplate BB 044074678574

281716 044074678598 8x34 Kickplate SN 044074678598

281830 044074682038 8x34 Kickplate Aged Bronze 044074682038

281852 044074678611 8x34 Kickplate Sat Aluminum 044074678611

282120 044074678628 8x34 Kickplate BB 044074678628

282357 043156253265 3.5x15 Push Plate BB 043156253265

282357 044074679014 3.5x15 Push Plate BB 044074679014

313858 044074008456 3.5x15 Pull Plate Anodized Aluminum 044074008456

313866 044074008395 3.5x15 Push Plate Aluminum 044074008395

313866 044074008418 3.5x15 Push Plate Aluminum 044074008418

872400 043156253258 3.5x15 Pull Plate BB 043156253258

872400 044074681253 3.5x15 Pull Plate BB 044074681253

0 44074 67856 7

0 44074 67857 4

0 44074 67859 8

0 44074 68203 8

0 44074 67861 1

0 44074 67862 8

0 43156 25326 5

0 44074 67901 4

0 44074 00845 6

0 44074 00839 5

0 44074 00841 8

0 43156 25325 8

0 44074 68125 3

7

BBID #17377

Page 8: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Step 1: Remove existing Schlage product from box and other areas that may be cross merchandised throughout store. Complete buy back 10 items and place other sku’s in clearance bay per store standards. Get with store personnel for pricing and placement.

8

Step 2: Demo wooden box and any existing overhead signage.

Step 3: Install versa posts if needed. Need 49” wide for Wall Versa Post

Versa Bottom Clip to be bolted to post

Page 9: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Step 4: Install Crownwall • The Crownwall should be assembled together stacking 42” wall on top of 42” wall (both come in the same box). • Wall should be placed 5” from the top of the base deck to the bottom of the wall and 16” back from front of beam to front of wall.

•See next page12 for 8’ wide instructions.

9

If spacing between

uprights is tight, the

adjustable arm assembly can be placed

on the outside of the

upright.

Page 10: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

For bays that have a depth greater that 36”, an extension plate must be attached to the back end of the horizontal support arms. For bay depths between 24”, 30” and 36” no adapter is needed. For bay depth of 42”, the 8” extension bracket (part number 18255) must be used. For bay depths greater than 42”, the 14” extension bracket (part number 18256) must be used.

42 - 37”

Bay Depth

48 - 43”

Bay Depth

Special Note for bays Deeper than 36”

Extension Bracket : 18255 - 8” is for 42” deep bays 18256 -14” is for 48” deep bays

CROWNWALL ARM EXTENSION 8“

18255 030699182558

CROWNWALL ARM EXTENSION 14“

18256 030699182565

1/22/2014 10

Page 11: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Step 4 (a): Install Crownwall onto 8’ wide Flex Wall • Assemble wall as directed on previous page. • Attach 3 brackets onto back of wall replacing the 2 outside screws in the top, middle and bottom of the Crow wall with those welded to brackets.

•Note: specific brackets are used for top, middle and bottom.

• Install into Flex wall standards were the bottom of the Crownwall is 5” from top of base deck to the bottom of the wall.

11 Top Bracket Middle Bracket Bottom Bracket

Page 12: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

12

Step 4: (cont) 8’ x 8’ Wall installation

For 8’ POG

Page 13: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Step 5: Install new Merchaids per POG • Heavy Duty Peg hooks (3 prong) are to be used on kickplates only. • All other hanging items get the 10” loop hook • Install small baskets for cross merchandise items (be sure to install 1 item mounted to outside of basket for display. (these will need to be marked down)

13

95605 3 Small Baskets

with displays

16019 Regular 10” loop

Peg Hooks

95625 Heavy Duty

10” loop Peg Hooks (3 prong)

to used on 6 kickplates only

These 3 Commercial Door Closers are to be cross merchandised in this bay

These number resent the hole the peg hook

will be installed.

(i.e… the 3rd row down and

the 9th hole and 14th hole from the left)

Page 14: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

Step 5: • Place new product on peg hooks and in baskets per POG. • Print price tags and label.

Note: The Commercial Door Closers are in the Screen and Storm bay. These 3 items will be merchandised in both locations.

• Install displays on the 3 baskets of Cross Merchandise items for the Builders Hardware bays. Use mending plates and screws on the inside of the basket to mount product displays.

14

Display on front of Basket

Inside shot of how to mount Display

Step 6: • Sequence Bay using THD 1st phone. • Complete survey, take pictures and post both on ISIS.

1/22/2014

Page 15: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

New Products

15

SKU CROWN PART EVERBILT PART EB UPC Description

269263 62004 14280 030699142804 CB 8"X34" KICK PLATE SATIN ALUMINUM

270192 62011 14290 030699142903 CB 8"X34" KICK PLATE SATIN NICKEL

269311 65482 14300 030699143009 CB 8"X34" KICK PLATE BRIGHT BRASS

270273 65492 14310 030699143108 CB 8"X34" KICK PLATE OIL-RUB BRONZE

270944 65502 14320 030699143207 CB 10"X34" KICKPLATE STAINLESS STEEL

1000014018 62014 14285 030699142859 CB 6"X30" KICK PLATE BRIGHT BRASS

272842 62010 14226 030699142262 CB 3.5"X15" PUSH PLATE SATIN ALUM

271186 65512 14236 030699142361 CB 3.5"X15" PUSH PLATE BRIGHT BRASS

272641 65522 14246 030699142460 CB 3.5"X15" PUSH PLATE OIL-RUB BRONZ

272845 65532 14256 030699142569 CB 3.5"X15" PUSH PLATE STAINLESS STL

276814 65582 14266 030699142668 CB 8"X16" PUSH PLATE STAINLESS STEEL

277216 65592 14276 030699142767 CB 8"X16" PUSH PLATE SATIN ALUMINUM

273468 65542 14286 030699142866 CB 3.5"X15" PULL PLATE BRIGHT BRASS

274417 65552 14296 030699142965 CB 3.5"X15" PULL PLATE OIL-RUB BRONZ

274624 65562 14306 030699143061 CB 3.5"X15" PULL PLATE SATIN ALUM

275847 65572 14316 030699143160 CB 4"X16" PULL PLATE STAINLESS STEEL

277235 65602 14326 030699143269 CB DOOR STRIKE PLATE STAINLESS STEEL

217090 14259 14257 030699142576 DOOR SILENCERS 12PK

161741 13559 030699135592 ADJUSTABLE DOORSTOP SATIN CHROME

161999 15055 030699150557 WALL DOORSTOP SATIN CHROME

304137 15258 030699152582 KICK DOWN DOORSTOP SATIN CHROME

Note: The SKU number is the same for both Ironman (Crown Part) product and Everbilt product. 53 stores currently have Ironman product. These stores will keep the Ironman items in the set and the new Everbilt will ship in the future and be a rolling change out.

1/22/2014

The last 3 items are currently in the builders hardware bays too (cross merchandised in CDH bay)

Page 16: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

3 Door Closers (items 22-24) on bottom shelf are currently merchandised in the Screen and Storm bay. These 3 Commercial Door Closure sku’s are to merchandised in both locations.

16

Loc ID SKU UPC Part Description Facings

1 100001401

8 30699620142 62014 6"x30" Kick Plate Bright Brass 1

2 271186 30699655120 65512 3.5" x 15" Push Plate Bright Brass 1

3 272641 30699655229 65522 3.5" x 15" Push Plate Oil Rubbed Bronze 1

4 272842 30699620104 62010 3-1/2"x15" Push Plate Satin Aluminum 1

5 272845 30699655328 65532 3.5" x 15" Push Plate Stainless Steel 1

6 277216 30699655922 65592 8" x 16" Push Plate Satin Aluminum 1

7 276814 30699655823 65582 8" x 16" Push Plate Stainless Steel 1

8 273468 30699655427 65542 3.5" x 15" Pull Plate Bright Brass 1

9 274417 30699655526 65552 3.5" x 15" Pull Plate Oil Rubbed Bronze 1

10 274624 30699655625 65562 3.5" x 15" Pull Plate Satin Aluminum 1

11 275847 30699655724 65572 4" x 16" Pull Plate Stainless Steel 1

12 304137 30699152582 15258 Kickdown Doorstop Satin Chrome 1

13 161741 30699150540 13559/1505

4 Low-Rise Doorstop Satin Chrome 1

14 161999 30699150557 15055 Wall Doorstop Satin Chrome 1

15 277235 30699656028 65602 Commercial Strike Plate Stainless Steel 1

16 217090 30699142590 14259 Door Silencer 12pk Gray 1

17 269263 30699620043 62004 8"x34" Kick Plate Satin Aluminum 1

18 269311 30699654826 65482 8" x 34" Kick Plate Bright Brass 1

19 270192 30699620111 62011 8"x34" Kick Plate Satin Nickel 1

20 270273 30699654925 65492 8" x 34" Kick Plate Oil Rubbed Bronze 1

21 270944 30699655021 65502 10" x 34" Kick Plate Stainless Steele 1

22 666064 87956404031

5 4031 Heavy Duty Commercial Door Closer Aluminum 1

23 666472 87956404051

3 4051 Medium Duty Commercial Door Closer Aluminum 1

24 666498 87956404052

0 4052 Medium Duty Commercial Door Closer Bronze 1

Planogram 1 Bay - 48 - Commercial Door Hardware_2013_CDH.V3

Page 17: 2014 Commercial Door Hardware 4’ Set - No-IPhgaportal.no-ip.org/_layouts/web/ClockWorks/project... · 2014-02-03 · 2014 Commercial Door Hardware 4’ Set ... Other items to be

YES

YES NO N/A

NO N/A

YES

YES

YES

YES

Reset Completion Sign Off

Address:

Phone:

Date:

Programs:

Reset Service Company:

Customer Name: Store Number:

All products set to POG

All POP set to POG

Overhead product striped

Aisle/s left clean and ready to shop

All program products price labeled

All Buy-Back product pulled and processed

Manager Signature:

CB or Service Representative:

26940 Aliso Viejo Parkway, Aliso Viejo, CA. 92656

NO N/A

NO N/A

NO N/A

All garbage removed and disposed of

NO N/A

YES NO N/A

Customer Comments:

Overall Rating: (Please Circle One) 1 2 3 4 5 6 7 8 9 10

17