2013 Stoller International Fall Catalog

PONTIAC HERSCHER MINONK OTTAWA STREATOR815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363

This book contains discounts on Hundreds of Harvest ItemsSale starts now thru September 14th, 2013

Fall 2013 - 78th YEAR - ISSUE 37

FALL CATALOG 2013A FARMER’S HARVESTING GUIDEBOOK

Note from Clark & LynnWelcome to our 78th year of harvest!Thank you for taking a moment to view our fall parts & service catalog. We value you as our customer and want to make sure we can pass on the best products and prices available to you! Stoller international is your source for the most innovative and progressive farm equipment money can buy. Our team of service technicians provide the support you

need to keep your equipment running at peak performance. Our parts department was recently awarded the highest level of achievement with the Pinnacle Performance Plaque. We want to thank each member of our parts department for the exceptional performance they exhibit while providing for our customers.

As we look ahead to our harvest of 2013, we are encouraged by all the new and progressive updates our local farmers have made in their farming operations. By investing in new and innovative equipment we are meeting the agriculuture challenges and goals set by our growing future. We see customers adopting guidance systems to make every inch count and equipment updates to monitor and challenge populations and yields. Please let us know how we make your fall harvest season more productive. We are here to serve you!

Truly,Clark & Lynn

2

He that dwelleth in the secret place of the most High shall abide under the shadow of the Almighty.

-Psalms 91:1

WEL

COME

FALL BOOKPARTS SPECIALS: ...............................

COMBINE...................................

PLATFORM HEADS......................

ROWCROP HEADS......................

BATTERIES.................................

LUBRICANTS.............................

DIESEL EXHAUT FLUID...............

FARM SUPPLY.............................

TILLAGE PARTS.........................

GENERATORS.....................................

PLANTER INSPECTIONS....................

TRACTOR INSPECTIONS......................

COMBINE INSPECTIONS......................

McFARLANE TILLAGE........................

PRECISION FARMING........................

ORDER FORM......................................

SHUTTLE ROUTE.....................................

4

4

10

14

18

19

20

21

24

27

28

29

29

30

32

34

35

COMB

INE P

ARTS

The original Axial-Flow combines made the first big step in the rotary combine revolution. They set new standards for grain quality and grain savings – benchmarks the rest of the industry has been chasing ever since. But leaders don’t stand still; we’ve been continuously evolving for 35 years.Every design innovation, each engineering improvement, puts these machines another step ahead. Introducing the Axial-Flow 30 Series combines. Climb up into the cab and take a look around. This is what leadership looks like.Axial-Flow is still out in front. First with the most comfortable cab for long harvest days and longer nights. Meeting emissions regulations while actually improving performance and fuel efficiency. Of course, the real proof is in the grain tank. The sample tells the story – the original single rotor combine is still ahead of the field.

AFX ROTOR

TRANSITION CONES• Availabel for 40, 60, and 80 series combines• The standard steel transport vanes are extended

to full depth of the cone to improve material flow• The standard steel vanes have 3/8” holes to

accomodate stronger 3/8” T-bolts

87636594 80 & 88 Series Rotor $6,596.00 $4,999.7986992118 40, 44, 60, 66 Series Rotor $5,519.00 $4,469.99

B93199 Heavy Duty 40, 44, 60, 66 $1,729.99 $1,499.9984265390 Heavy Duty 80 & 88 $1,750.17 $1,549.95

Why Purchase and AFX Rotor?• The AFX rotor features graduated pitch inlet flights for a more smooth, relaxed

crop flow from the feeder to the rotor discharge. More consistent material flow• Reduces peak rotor HP requirements in tough conditions• Results in quieter operation• Improves rotor thoughput capacity 5-25%, particularly in tough conditions• Depending on crops and conditions the AFX rotor can improve overall

productivity and fuel efficiency• The AFX rotor creates a strong vacuum, moving dust away from the feeder

house and cab area for excellent header visibility

B4265390

4 STOLLERIH.COM PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363

B93730 Impeller Kit complete - Regular (40, 44, 60, 66 Series) $909.00 $749.99

B93731 Impeller Kit complete - Chrome (40, 44, 60, 66 Series) $1,160.69 $899.99

B93732 Impeller Kit compete - Regular (80, 88 Series) $572.41 $486.49

B93733 Impeller Kit complete - Chrome (80, 88 Series) $653.79 $499.99

B94524 Wear Bar Kit complete - Regular (40, 44, 60, 66 Series) $235.00 $199.99

B94525 Wear Bar Kit complete - Chrome (40, 44, 60, 66 Series) $410.00 $329.99

B94526 Wear Bar Kit complete - Regular (80, 88 Series) $168.00 $139.99

B94527 Wear Bar Kit complete - Chrome (80, 88 Series) $301.00 $239.99

COMBINE ROTOR IMPELLER KITSFor 1400, 1600, 2100, 2300 Series Axial-Flow Combines

Impeller Kit Wear Bar Kit

CASE IH RASP BAR KITInstall a Case IH Rasp Bar Kit & get original equipment quality, plus all new hardware for easy installation

B95358 40, 44, 60, 66 Series Specialty $594.48 $505.29

B95365 80, 88 Series Specialty $793.10 $669.99

Grain Rotor Rasp Bars/Half Sets

Grain Rotor Rasp Bars/Full Sets

B93417 40, 44, 60, 66 Series Standard $602.80 $539.99

B93418 80, 88 Series Standard $804.00 $679.99

B93656A 40, 44, 60, 66 Series Specialty $953.10 $709.99

B93657A 80, 88 Series Specialty $1,310.34 $999.99

B95267 60, 66 Series 3 Bar Kit $59.72 $43.99

B95219 80, 88 Series 4 Bar Kit $79.45 $64.99

CASE IH RASP BAR PACKS• Specifically designed for your combine• Performance, strength, wear-resistance, &

durability packaged for customer convience• Kit includes rasp bars, Grade 8 flange bolts, & nuts

B96128 2002 & Newer One Piece 40, 44, 60, 66 Series Set $1,469.04 $1,319.99

B96125 2002 & Newer One Piece 80, 88 Series Set $1,690.48 $1,384.99

B93572 Standard 40, 44, 60, 66 Series Set $1,740.00 $1,399.99

B93574 Standard 80, 88 Series Set $1,905.00 $1,669.99

87298938 Round Bar Concave Kit - Fits 80 size machines $2,024.22 $1,599.99

CONCAVES

Case IH Concaves are not line-bored like some “might-fits.” The unique 3-radius design provides a balanced system for best performance in feeding capacity and crop threshing. Extension kits for standard concaves sold seperately.

RESTORE THRESHING EFFICIENCY

5 STOLLERIH.COM PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363

Cas

e IH

Par

ts &

Se

rvic

e Ex

poIn

dian

apol

is, IN

STOLLERIH.COM PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363

COMB

INE P

ARTS

FEEDER CHAINS AND FEED CHAIN KITS

CHAIN ROLLER KITS• These kits will reduce the wear on your

feeder chain by keeping the chain off the upper and lower wear plates

• Improved chain life • Fits all Axial Flow combines• Kit includes shaft, rollers, and required

hardware

Heavy duty, American made #557 chain and chrome pins. Fully assembled feeder chain with bolted, easily replaceable slats. High-carbon steel slats offer up to 65% greater strength.

47” Smooth Feeder ChainFor 1620, 1640, 1644, 1660, 1666 SeriesPart No. 117869A1Reg Price $548.20Sale Price $481.99

54” Smooth 2-Strand Feeder ChainFor 40, 44, 66 SeriesPart No. 117871A1Reg Price $634.60Sale Price $569.9954” Smooth 2-Strand

Feeder ChainFor 80, 88 SeriesPart No. 117872A1Reg Price $674.97Sale Price $599.99

54” Serrated 3-Strand Feeder ChainFor 80, 88 SeriesPart No. 84207190Reg Price $1,313.11Sale Price $1,149.99

Feeder Chain SprocketFor 40, 44, 60, 66, 80, 88 SeriesPart No. 1970248C1Reg Price $131.52Sale Price $115.49

Feeder Chain w/ Rock Trap (2 used)For 10 SeriesPart No. 87283356 Reg Price $763.68Sale Price $679.99

Feeder ChainWith Rock Trap (2 used)For 7010, 8010 SeriesPart No. 87397925Reg Price $898.79Sale Price $675.99

Feeder ChainWith Rock Trap For 7120, 8120, 9120, 7230, 8230, 9230 SeriesPart No. 84179639Reg Price $1,725.60Sale Price $1,499.99

3-Strand ModelsPart No. B95753Reg Price $460.00Sale Price $413.91

2-Strand Models40, 44, 60, 66 Series Part No. B95751Reg Price $348.28Sale Price $313.29

2-Strand Models88 Series Part No. B95752Reg Price $348.28Sale Price $279.99

Install these roller kits and your combine will run quieter than ever

3-Strand Feeder Chain KitFor 80, 88 SeriesPart No. B93532Reg Price $2,019.52Sale Price $1,749.99

Feeder Shaft BearingPart No. 84330027Reg Price $76.59Sale Price $59.99

Drum Stop Kit•Includes hardware and stops•Combines w/ stone retarder

drumsPart No. B95679Reg Price $51.75Sale Price $29.99

6


ELEVATOR CHAINS

1302201C91 Fits 1440, 1460 $412.01 $299.991321334C92 Fits 1640, 1644, 1660, $416.27 $369..99 1666, 2144, 2166, 2344, 2366

87313692 Fits 1680, 1688, 2188, 2377 $460.69 $414.59 2388, 2577, 2588

87365387 Fits 5088, 6088, 7088, 5130 $588.05 $529.19 6130, 7130

These heavy-duty roller chains feature a pre-lubed chain that reduces break-in wear & heavy-duty rubber paddles.

1303114C91 Fits all Belt Driven $238.96 $214.99 Axial Flow Combines

CASE IH ROLLER CHAIN

1321529C95 Feeder reverser with rocktrap (40, 44, 60, 66, 80, and 88 series) $250.19 $219.991321524C94 Feeder reverser without rocktrap (40, 44, 60, 66, 80, and 88 series) $150.08 $119.99B192186 Tailings elevator drive (1440, 1460, 1480, 1640, 1660) $47.36 $41.99B1302671 Tailing elevator drive (1680-7088 2377 & 2577) $46.83 $41.49

B1327724 Tailings elevator drive (44 & 66 Series) $52.40 $46.99B182774 Clean grain elevator drive (1440, 1460, 1640, 1660) $74.95 $66.99

B1321308 Clean grain elevator drive Horizontal Auger $76.12 $67.99 (1644, 1666, 1680, before s/n 47413, 2144, 2166, 2344, 2366)

B1321307 Clean grain elevator drive Incline Auger (1640, 1644, 1660, 1666, 2144, 2166) $71.31 $63.99

B1327534 Clean grain elevator drive (1680 after s/n47413, 1688, 2188, 2388) $74.48 $66.99B192927 Unloader drive, Lower Auger (1440, 1460, 1480, 1640, 1660, 1680) $40.79 $36.69

B113200A1 Unloader drive, Lower Auger (All 44,66, and 88 series) $40.14 $35.99

B192928 Unloader drive, Vertical Auger (1440, 1460, 1480, 1640, 1660, 1680) $37.77 $33.99

B1303207 Unloader drive, Vertical Auger (1644, 1666, 1688, 2144, 2166, 2188, 2388) $44.98 $39.99B617107R91 Variable drive, rotor (40, 44, 60, 66, 80, 88 series) $18.95 $16.99

B94750 Main drive (963, 1063) $174.50 $156.99B199870 Main drive (943, 944, 1043, 1044) $56.40 $49.99B199869 Main drive ( 983, 1083) $55.48 $49.99

STAINLESS STEEL AUGER TROUGH WEAR LINER KIT• Kit includes two stainless steel

grain tank auger liners and 70 stainless steel pop rivets

• Restore life to a worn tank bottom or protect new tanks from wear. The liners slip under the grain tank cross augers. Drill holes and pop rivets in place.

• For all mid-range Axial-Flow combines.

Top Quality American Made Drive Chain. Pre-cut chains available for combines, platforms, and cornheads.

7

Part No.87561634Reg Price $660.66Sale Price $499.99

Clean Grain Elevator

Tailings Elevator

WJE

Z Ta

ste o

f Hom

e Sho

w P

ontia

c, IL


COMB

INE P

ARTS

CASE IH HORIZONTALUNLOADING AUGER KITS• For most Axial-Flow Combines• Now you can conveiniently

renew componts or replace your existing horizontal auger with a longer unit. It’s your least hassle, least cost method of keeping your machine operating like new with original equipment parts.

• Older machines (mid-production 1640, 1660, 1680) can be updated with Part No. B92949 gear box kit or by ordering the splined vertical auger and upper gear box.

• Horizontal auger kits with plain or perforated tubes include spill-saver and downspout

B94091 172” two-piece Auger $1,675.00 $1,199.99 with center coupling B94094 208” two-piece Auger $1,840.00 $1,279.99 with center coupling

B94095 208” two-piece Auger $3,386.65 $2,899.99 with center coupling and plain tubes

Auger Kit - Standard Duty

Kit includes new style 20 rivet elbow. Rivet size has been increased from 1/4” to 5/16”. Grease lines and mounting hardware are included but not shown. Available in standard duty and Extenda-wear versions.

CASE IH ELBOW KIT

Elbow Assembly-Standard DutyPart No.B94090AReg Price $1,068.83Sale Price $940.59

VERTICAL UNLOADING TUBE

For 40, 44, 60, 66, 80, 88 series Part No.B95650AReg Price $885.54Sale Price $789.99

B92718 Lower Gearbox Kit $1,812.41 $1,399.99 B92949 Lower/Upper Gearbox Kit $2,426.21 $1,999.99 (Also requires horizontal unloading auger)

s

Wet or heavy crop conditions can cause extreme loads on the grain tank unloading system. Case IH offers a conversion kit to update your Axial-Flow machine to current production with enclosed oil bath gearbox.

UNLOADING AUGER ASSEMBLY WITH ENCLOSED GEARBOX

Features:•Complete kit includes attaching hardware, chains

sprockets, gearbox, lower support, and vertical auger•Fully enclosed gearbox with gears in operating oilBenefits:•Reduced installation time•Same reliable assembly as current production• Quieter operationa and longer life

8


•Allows operator to adjust middle section of the chaffer and the shoe sieve from the side of the combine instead of adjusting from the rear of the combine

•This kit helps to improve the cleaning capacity of the combine

•All 2001 and newer combines are factory ready for this kit

Part No. 427331A11644, 1666, and later machinesReg Price $478.00Sale Price $429.99

EXTERNAL SIEVE ADJUSTMENT KIT

Part No. 427332A11688 and later machinesAlso 1680’s with long sievesReg Price $488.00Sale Price $439.09

CURVED SPREADER BAT KITS

IMPROVED SHAKER DRIVE PIVOT SUPPORT KIT

COMPLETE SPREADER REPAIR KIT

With this kit, you’ll be able to spread straw and chaff over a wider area up to 30’! The kit includes 6 bats (3LH & 3 RH) & all necessary mounting hardware

40, 44, 60, 66 Series Part No.413004A1Reg Price $246.00Sale Price $209.99

80 & 88 Series Part No.400505A1Reg Price $262.07Sale Price $229.99

•Support made from cast iron for greater strength and durability

•Replaces prior welded “C” channel• Includes support and hardware•All models

Part No. B95353One SideReg Price $285.00Sale Price $249.99

Part No. B95354Both SidesReg Price $557.30Sale Price $499.99

• Seven bearings, fourteen flanges, and hardware

•Original equipment parts

Part No.B95291Reg Price $273.00Sale Price $236.99

Spreader Repair Kit•For all Axial Flow combines•Handy service repair kit•Includes two bearings, four

flanges and hardware

Part No.B95292 Reg Price $69.00 Sale Price $49.99

Idler SprocketPackagePart No. B95302Reg Price $32.71Sale Price $29.39

Bed Auger Mounting KitPart No. B94626Reg Price $19.25Sale Price $15.99

Spring KitFan PulleyPart No. B95208Reg Price $77.50Sale Price $59.99

Sieve BushingKit Fits late 1680-2388Part No. B94625Reg Price $62.50Sale Price $49.99

Chain Guide Wood Block KitPart No. B95300Reg Price $14.96Sale Price $13.09

9

Part

s Dep

artm

ent

Trai

ning

Day

s at

the

Farm


PLAT

FORM

PART

S

10

Two Double Knives with 1/4” carriage boltsPart No. 87298693Reg Price $16.00Sale Price $14.39

UPTIME PACK•Handy uptime pack for

shop or toolbox•Double knife kits include

knives and hardware•Single knife kits include

knife and hardware•Knives are new, taller

profile style Two Double Knives with #10 boltsPart No. B95767Reg Price $25.50Sale Price $20.45

Single Knife with 1/4” carriage boltsPart No. 87298694Reg Price $8.19Sale Price $7.29

Single Knife with #10 boltsPart No. B95906Reg Price $13.25Sale Price $11.39

Rotor Blade KitPart No. B96349Reg Price $36.00Sale Price $31.69

CHOPPERKNIFE KITSExternal Straw Chopper KitProviding four adjustment setting outside the combine, these kits allow you to position the fixed bar assembly to the crop residue length you need. Designed for your convenience and improved management of residue.

80 & 88 SeriesPart No. B95783Reg Price $680.00Sale Price $602.9940, 44, 60, 66 SeriesPart No. B95784Reg Price $651.72Sale Price $579.99

B93329P 1.5” cut-black (10 pack) 1020 series $16.25 $14.12B93330P 1.5” cut-chrome (10 pack) 1020 series $21.13 $18.81112074P 3” cut-black (10 pack) 1020 series $12.69 $11.29191256A1 3” cut-chrome 1020 series $2.00 $1.7586616691 3” cut 2000 series $1.90 $1.5387728905 3” cut 3000 series $2.10 $1.6984342600 3” cut Draper Heads $1.46 $1.29

DIAMOND SHARP SECTIONS & GUARDSSECTIONS

1989552C1 1.5” cut 1020 series $19.39 $17.251307299C2 3” cut 1020 series prior to sn JBJ02301 $17.49 $15.4987442324 3” cut 1020 series Heat Treated (sn CBJ02301 & after, also all 2000 series) $19.28 $17.1687702974 3” cut 3000 series $21.19 $18.7987560324 3” cut Hardened - Draper Heads $19.14 $16.8087421451 3” cut Heat Treated - Draper Heads $19.50 $16.50

GUARDS

101001A2 1.5” cut 1020 series $43.75 $35.701307280C3 3” cut 1020 series $5.24 $4.4586630786 3” cut 2000 & 3000 series $8.04 $6.8387407812 3” cut Draper Heads $9.60 $8.16

HOLD DOWNS

Case IH Sta-Sharp & Super Stay Sharp sections have special design root serration to prevent excessive wear across the top. Complete selection available

STOLLERIH.COM PONTIAC HERSCHER MINONK OTTAWA STREATOR 815-844-6197 815-426-2119 309-432-2525 815-433-2211 815-673-3363 11

CROP DIVIDER END ASSEMBLY•Complete replacement end assembly for long dividers•Fully assembled - ready to install•Poly point

B94154 LH 1000 series heads $609.00 $497.00B94155 RH 1000 series heads $609.00 $497.0087298163 LH 2000 series heads $428.97 $376.0087298164 RH 2000 series heads $428.97 $376.00

CUTTER BAR REBUILD KITS 1020 SERIES

B95549 20’ Cut $1,635.00 $1,389.00B95551 25’ Cut $2,010.00 $1,709.00B95552 30’ Cut ` $2,370.00 $2,014.00

•Kits are complete and include: guards, hold-down clips, wear plates, and hardware.

371619A2 20’ Cut $471.00 $400.00371621A3 25’ Cut $522.00 $443.00371622A3 30’ Cut $611.48 $519.00

3” Split Knives Only

Kits with Knife Assembly - 3” Cut

POLY POINT KITPart No. B95408Reg Price $46.90Sale Price $38.95

Plow

Day

Grid

ley,

IL


WOBBLE BOXES

1020 Headers(includes pulley)(Prior to 1995 models)Part No. 1316987C91 Reg Price $1745.00Sale Price $1,439.00

Part No. 1316987C91R(reman exchanged)Reg Price $957.33Sale Price $815.00

1020 Headers(oil bath)(1995 models and after)Part No. 398290A2EReg Price $1,820.06Sale Price $1,350.00

Part No. 87502685R(reman exchanged)Reg Price $1,737.78Sale Price $1,399.00 WOBBLE BOX

REPAIR KIT1020 Headers•Includes bearings,

shims, and hardware•Fits Part No.

1330048C91and Part No. 1316987C91

Part No. B95203Reg Price $258.00Sale Price $199.95

AUTOMATICHEADER HEIGHT CONTROL FOR 1020 GRAIN HEADS

For 1000 Series Heads with High Visibility Reels year 2001 & up also fits 2000 & 3000 HeadsPart No. B95872 Reg Price $3.50Sale Price $2.89

REEL TINES

For 1000 Series Heads year 2000 & below Part No. B93868 Reg Price $3.59Sale Price $3.05

For 1000 Series Heads with Love Reels(front mount)Part No. B93867 Reg Price $3.35Sale Price $2.79

For 1000 Series Heads with Tear Drop Bats (rear mount)Part No. B93866Reg Price $2.64Sale Price $2.19

For Draper Heads Part No. 87561020Reg Price $7.14Sale Price $6.05

Part No. 434092A4EReg Price $388.28Sale Price $315.00

PLAT

fORM

PART

S

Special Price While Supplies Last


AUTOMATICHEADER HEIGHT CONTROL FOR 1020 GRAIN HEADS

REEL TINES

For Draper Heads Part No. 87561020Reg Price $7.14Sale Price $6.05

Maximize productivity with genuine Case IH parts and performance kits. A productive harvest is a profitable one. Genuine Case IH parts and performance kits, the only parts specifically engineered for Case IH combines, are designed to exacting standards and built from premium components to deliver undeniable performance, unrivaled reliability, and an unbeatable fit. Because in the end, it’s about keeping your equipment, and your operation, running smoothly all season long. Be Ready. A high-performance harvest starts here. Visit us today!

STOLLER INTERNATIONAL INC.15521 E. 1830 North RoadPontiac, IL 61764815-844-6197www.StollerIH.com


ROW

CROP

PAR

TS

Gathering Chain•Far greater wear life than

imported “look-a-likes•Regular-duty chain for 800,

900, & 1000 series Part No.B176279C91Reg Price $42.75Sale Price $35.99

1000 Series Cornhead parts

Cornhead Parts

Idler Sprocket Kit800-1000 SeriesPart No. B94739Reg Price $23.75Sale Price $19.99

1000 Series Stalk Roll Stripper Plate Kit•Made from high strength mate-

rial for superior performance•Kit includes plates & hardware•Fits 900 & 1000 headsPart No. B95449Reg Price $81.75Sale Price $67.99

CASE IH GENERAL MAINTENANCE INSPECTION

CHECKLIST (For specific details and measurements see a Stoller’s Service Team member)

1. Level the corn head2. Check all divider points for free movement and height adjustment3. Inspect gatherer chains for wear and adjustment. Gatherer chain flights should be aligned to mating chain4. Inspect gatherer chain idler sprockets for wear, damaged teeth, and bearing failure5. Inspect gatherer chain tension control brackets for free movement and spring condition6. Inspect gatherer drive sprocket shields7. Inspect main drive chain & sprockets8. Check stalk roll spacing9. Inspect stalk roll knives for condition and adjustment10. Inspect front and rear stalk roll weed knives for damage11. Set the stalk roll stripper plates uniformly, 1´1/4˝ at front, 1-3/8˝ at rear for normal crop conditions12. Check stalk roll slip clutches, adjust as needed13. Inspect stalk roll frames for cracks or other damage14. Check auger-to-troughbottom adjustment15. Check auger-to-stripper adjustment, 3/4˝ clearance at upper center stripper. 16. Check auger slip clutch; adjust as needed (if equipped)17. Inspect auger drive chain & sprockets18. Check the oil level in all gear cases with the header in the down position19. Inspect the lubrication lines to all stalk roll points. Check for any holes in the lubricants lines (if equipped)20. Lubricate all grease points21. Check for proper reflectors22. Make sure all safety and instruction decals are readable23. Be sure all shields are in place

Drive SprocketPart No. B94733 800 SeriesReg Price $39.03Sale Price $31.99Part No. B94734 900-1000 SeriesReg Price $36.55Sale Price $31.49


Skid Pad KitsPart No.B94736Inner 30” Rows Reg Price $19.78Sale Price $16.99Part No. B94845Outerall row sizesReg Price $19.39Sale Price $14.99

Point Kit Steel- Divider

Part No. B94737Inner - 30” Rows Reg Price $26.25Sale Price $18.99Part No. B94738Outer-all row widthsReg Price $27.00Sale Price $18.99

Stalk Roll Support KitPart No. 87298084 (both sides) Reg Price $443.45Sale Price $369.95Part No. 87298082 -LHReg Price $221.52Sale Price $184.99Part No. 87298083 -RHReg Price $221.52Sale Price $184.99

1000 Series Corn Head Ear Saver Kit•Reduce ear loss•High-strength rubber•Hardware included

Part No. B94550ASteel HoodsReg Price $14.79Sale Price $12.29Part No. B94838APoly HoodsReg Price $14.79Sale Price $12.29

Gathering Chain•Far greater wear life than

imported “look-a-likes•Regular-duty chain for 800,

900, & 1000 series Part No.B176279C91Reg Price $42.75Sale Price $35.99

Stalk Roll AssemblyKit Includes:•LH & RH Roll Assembly•Lower support & hardware•Lower support shims•Spiral augersPart No. B92764AReg Price $728.00Sale Price $599.99

Standard Kit -1 RowKit Includes:•Corn head knives (8)•HardwarePart No. B94532900 & 1000 Series Reg Price $207.00Sale Price $180.99

1000 SERIES CORN HEAD KIT

Outer Divider - LHPart No. 320084A1EReg Price $335.53Sale Price $295.19

Outer Divider - RHPart No. 320085A1EReg Price $350.57Sale Price $299.99

Bearing & Shield Kit•Includes 2 bearings &

2 shields•Lower stalk rollPart No. B95612Reg Price $108.28Sale Price $84.99


Kit includes:•Corn Head •knives (4)•Special

hardware

Part No. B95583AReg Price $289.00Sale Price $259.99

ROW

CROP

PAR

TS

Part No. B95584AReg Price $1,370.00Sale Price $969.99

2000 Series Cornheads

Parts2000 & 3000 Series Cornhead parts

Idler Sprocket Kit Part No. B95573Reg Price $22.75Sale Price $18.99

Drive Sprocket KitPart No. B95574AReg Price $64.00Sale Price $51.99

Outer Row Divider - 30” Rows Part No. 86620218Reg Price $479.00Sale Price $399.99

Stalk Roll Assembly - 1 Row•Stalk Roll tube -

knife style (2)•Knife (4)•Roint RH (1)•Point LH (1)•Gathering Chain (2)

with chrome pins•Idler Sprocket (2)•Drive Sprocket (2)•Special hardware

2200 & 2400 Series Standard Gathering Chain - 8 lugPart No. 86979313Reg Price $41.68Sale Price $36.99

2200 & 2400 Series Extenda-Wear Gathering Chain8 lugPart No. 86978515Reg Price $65.27Sale Price $57.99

2200 & 2400 Series Corn Head Kits and Knife Blades Standard Kit-1 row

Cornhead Parts


3000 Series Cornheads

Parts2000 & 3000 Series Cornhead parts

Low Profile Point KitsPart No. 8701798530” Rows Reg Price $33.25Sale Price $23.59

Ear Saver KitPart No. B95582Reg Price $30.00Sale Price $20.99

Inner Hood30” RowsPart No. 86620224Reg Price $529.00Sale Price $419.99

Inner Row Divider 30” RowsPart No. 86620220Reg Price $525.16Sale Price $439.99

Outer Row Divider - 30” Rows Part No. 86620218Reg Price $479.00Sale Price $399.99

3000 Series Gathering Chain •6 LugPart No. 84284709Reg. Price $68.75Sale Price $60.9for 8-lug chain use 2000 Series Chains

Cornhead Parts

3000 Series Knife Kits•1 Row•8 Knives & HardwarePart No. 73340131Reg. Price $216.00 Sale Price $193.99


FARM

SUPP

LY

BMF31GW 12 950 190 post type Fits most Magnums & combines $123.00 $103.99BMF31GSW 12 950 190 stud type Fits most Magnums & combines $123.00 $103.99B2472W 12 600 115 Fits 86 series $ 84.00 $ 69.99BPR3EHW 6 850 280 Fits older IH tractors $ 98.75 $ 83.99BPR4EHW 6 930 320 Fits older IH tractors $124.00 $104.99

BCM5DAW 6 1000 280 Fits older John Deere tractors $111.00 $ 93.99

BHC30W 12 625 160 Fits older Case & Allis Chalmers $117.00 $ 98.99

BCM1W 6 625 160 Fits H series Farmall $ 74.75 $ 62.99BCH2W 6 820 250 Fits M series Farmall $ 92.00 $ 77.99

BU1W 12 342 42 Lawn & Garden Quality $ 61.25 $ 51.99

BCH4DLTW 12 1000 220 Quad-Trac plus 4WD $176.00 $149.99

Case IH Quality Batteries

CC2820 Concentrate - 1 gallon $ 27.89 $ 23.69CC2825 Premix - 1 gallon $ 17.25 $ 14.59

CC2848 Premix - 5 gallon $ 79.57 $ 67.59CC2826 Premix - 55 gallon drum $818.21 $694.99CC36077 Premix - 1 gallon (red) $ 18.33 $ 15.59

Coolants

UP TO 15%OFF

BATTERIES

Why Choose CNH Premium Batteries? -CNH Batteries are designed to match the charging system-CNH Batteries are designed to meet rigorous off-road specifications• Built for vibrations up to 5G’s• Recharging capabilities

(dormant product)• High cycling

MISSION STATEMENTThe Stoller International Team is committed to the highest level of satisfaction as we provide equipment, parts, and service to our customers. We will treat all our customers with respect and professionalism as we meet their needs in a timely, knowledgeable, and competent manner. Our team will concentrate on personal training and internal communication while building the mutual trust and respect required for our future success.


143945A2 Hy-tran Ultra 2.5 gallon $ 43.82 $39.95

372705R7 Hy-tran Ultra 5 gallon $ 76.60 $68.20

143947A2 30W No. 1 diesel engine oil 2.5 gallon $ 45.99 $41.99407356R5 30W No. 1 diesel engine oil 5 gallon $ 81.80 $72.29

143949A1 15W40 No. 1 diesel engine oil 2.5 gallon $ 45.42 $41.29407414R2 15W40 No. 1 diesel engine oil 5 gallon $ 79.38 $71.25

B85142 Gear Lube 85-140 weight 1 gallon $ 21.96 $19.29

B85144 Gear Lube 85-140 weight 5 gallon $ 97.65 $86.29132096A1 Grease for guns 14.5 oz. tube $ 3.70 $ 3.19B95920 Grease for 2200 series corn heads -14.5 tubes $ 4.40 $ 3.59

30W No. 1 Engine Oil Hy-tran Ultra 15W 40 No. 1 Engine Oil 30 gallon drum 55 gallon drum 30 gallon drumPart #407360R5 Part #999655R7 Part #253782A1Reg Price $457.32 Reg Price $829.15 Reg Price $463.12Sale Price $407.02 Sale Price $737.95 Sale Price $412.18

Preserve Your Investment at StollerInternationalwith Quality Case IH Lubricants

Lubricants


FARM

SUPP

LY

We handle DEF & DEF Pumps!

2.5 lbs. 5 lbs. 10 lbs.Part #549973C91 Part #549974C91 Part #549975C91 Reg Price $54.40 Reg Price $75.75 Reg Price $159.00 Sale Price $45.99 Sale Price $63.99 Sale Price $124.69 (mounting bracket extra)

ABC Fire Extinguishers

2.5 Gallon Jug Part #23641 Reg Price $13.99Sale Price $12.59 55 Gallon Drum Part #R32552Reg Price $184.00Sale Price $167.75

275 Gallon TotePart #R32553Reg Price $866.00Sale Price $809.99


Portable Heater170,000 BTU/HHeats up to 4000 sq. ft.13 Gallon Fuel Tank10 to 13 hours of usePart #MC170DGD Reg Price $420.00Sale Price $349.95

Portable Heater75,000 BTU/HHeats up to 1750 sq ft5 Gallon Fuel Tank9 hours of usePart #MC75DGD Reg Price $271.00Sale Price $221.95

Trash Pump2”-7HPPart #WP2070CMReg Price $199.95Sale Price $164.59

Trash Pump Hose KitPart #98128657Reg Price $99.95Sale Price $79.99

Implement Tires9.5L-15 (8Ply)tubelessPart #95L15-8R-IReg Price $107.36Sale Price $85.9911L-15 (8Ply) tubelessPart #11L15-8R-IReg Price $123.12Sale Price $99.99

58510 2” x 30’ Rachet Strap $24.02 $20.3958527 2” x 27’ Rachet Strap $24.99 $21.2951316 1” x 15’ Rachet Strap $14.91 $12.5958504 2”x7’ Tie Down $17.55 $15.4406701 10” Tarp Strap $ 0.69 $ 0.5906702 15” Tarp Strap $ 0.98 $ 0.7406703 21” Tarp Strap $ 1.29 $ 1.0906704 31” Tarp Strap $ 1.73 $ 1.4906715 41” Tarp Strap $ 2.99 $ 2.1959801 4” x 30’ Recovery Strap $73.80 $62.6959802 6” x 30’ Recovery Strap $113.40 $89.99

Cam Straps, Rachet Straps, Tie Downs, & Tarp Straps

Fresh Cab Rodent RepellantAlso absorbs odors (4 pack)Part #FRESHCABReg Price $14.50 Sale Price $12.49

Rapid Sorb FloorAbsorbent 50# bagPart #OILDRYReg Price $6.35Sale Price $5.29

Portable Heater170,000 or 210,000 BTU/HHeats up to 5,000 sq ft13 Gallon Fuel Tank8-10 hours of usePart #MC210DGD Reg Price $466.00+Sale Price $399.78

We handle DEF & DEF Pumps!


12 Volt DC Heavy Duty Transfer KitPart #FR1210C Reg Price $438.84 Sale Price $349.95

12 Volt Cordless Grease Gun 2 Battery KitPart #1244 Reg Price $234.00 Sale Price $184.39

14 Volt Cordless Grease Gun2 Battery KitPart #1444 Reg Price $306.00 Sale Price $239.29

18 Volt CordlessGrease Gun 2 Battery KitPart #1844 Reg Price $315.00 Sale Price $259.95

115 Volt AC Fuel Transfer Pump 13 GPMPart #SD602G Reg Price $429.74 Sale Price $349.69

115 Volt AC Fuel Transfer Pump 20 GPMPart #FR700VA Reg Price $623.05 Sale Price $498.00

100 Piece SAE Grease Fitting AssortmentPart #MC5417 Reg Price $41.75 Sale Price $33.47

60 Piece MetricGrease Fitting AssortmentPart #MC5418 Reg Price $33.25 Sale Price $26.95

Fill-rite Products: The following accessories available in stock.

Part No. Description Reg. Price Sale PriceN075UAU10 Fill-rite Auto shut off nozzle: 3/4” inlet $66.90 $52.95N100DAU10 Fill-rite Auto shut off nozzle: 1” inlet $79.95 $62.49FRH07514 Fill-rite Replacement hose: 3/4” dia. x 14’ $29.49 $24.99FRH07520 Fill-rite Replacement hose: 3/4” dia. x 20’ $37.43 $31.82FRH10020 Fill-rite Replacement hose: 1” dia. x 20’ $54.57 $46.39

FARM

SUPP

LY


60 Piece MetricGrease Fitting AssortmentPart #MC5418 Reg Price $33.25 Sale Price $26.95

Case IH Mini Fridge Makes Cold & Hot Drinks easily accessible! Plugs into cigarette lighters

Part #ZAEREF12V Reg Price $63.57 Sale Price $54.99

FARM SUPPLY

Shop Towels60 Towels on a rollPart #54400Reg Price $2.24 Sale Price $1.89

200 CountBucket of TowelsPart #55208Reg Price $16.99Sale Price $14.29

Battery Charger300/200/60/30 ampPart #SE8050DSReg Price $342.00Sale Price $273.60

Battery Charger200/30/10 ampPart #SE3010DSReg Price $171.00Sale Price $129.95

Battery Charger200/100/40/10/2 ampPart #SE4020DSReg Price $189.00Sale Price $149.79

Shop Towels3000 Towels per boxPart #TOWELReg Price $73.25 Sale Price $63.99

CLEANING SUPPLYCase IH Chemicals

The Original Scrubs in a Bucket•Heavy-duty, pre-moistened disposable towels•Removes grease, sealants, adhesives, oils, and more

from hands and tools•Contains glycerine, jojoba,

vitamin E, & aloe vera•Each re-sealable, pop-open

tub contains 90 multi-purpose towels Part #TW-90Reg Price $18.68Sale Price $14.69

ZRG017BRC Brake Parts Cleaner $5.67 $4.74B505500 Chain & Cable Lube $6.64 $5.64

B505502 Penetrating Oil $5.28 $4.48

B505501 Rust Penetrating Oil $5.34 $4.50

MCAS11 Fluid Film (11 oz.) $10.47 $8.79

ZAD3 Starting Fluid (7 oz.) $4.39 $3.69

ZAD4 Starting Fluid ( 11 oz.) $4.82 $4.09


GENUINE BLU-JET REPLACEMENT PARTS

LANDOLL WEATHERPROOFER PARTS

AM2438 Shank $535.00 $479.00

70210154 Summer Point $51.00 $43.29

70210153 Fall Point $70.00 $59.95

AP2701 Coulter $51.00 $42.95

87460075 2” Parabolic Point $69.00 $59.93

87460069 5” Wing Point $102.63 $91.29

87460070 7” Wing Point $118.22 $105.21

87460072 10” Wing Tiger Pint $138.00 $118.95

87460159 10” Replaceable Tip $255.97 $227.81

87388006 8” No-Till Wing Point $148.84 $127.59

33310079 4” Moldboard $26.51 $23.51

33310080 6” Moldboard $23.89 $21.43

33310070 8” Moldboard $31.25 $26.99

87443008 20” Disc Blade $55.36 $47.05

87443010 22” Disc Blade $54.08 $47.96

CASE IH & DMI CHISEL PARTS

Dorsal Fin PointPart No. RPLAW27HFReg Price $41.73Sale Price $37.49

Wear GuardPart No. 167-0047Reg Price $67.51Sale Price $53.95

22” Disc BladePart No. 22X1414SREReg Price $60.40Sale Price $54.37

24” Disc BladePart No. 24X1414SREReg Price $65.95Sale Price $59.35

Winged PointPart No. 131085Reg Price $98.88Sale Price $84.04

T

ILLAG

E

M&W EARTHMASTER PARTSRM12 Plain Point (uses pin) $14.17 $12.75

RM12HF Hardface Point (uses pin) $23.00 $20.70

77MW Point Pin $6.34 $5.71

88MW Oversized Point Pin $9.78 $8.80

AL2460282 Plain Point (uses bolt) $88.04 $74.29

AL2460283 Winger Point (uses bolt) $104.78 $81.78

87618075 22” Disc (Case IH Earth Metal) $53.50 $45.40

998865R3 24” Disc fits M&W $60.00 $50.55 (Case IH Earth Metal)

77MW

AL2460282

RM12

RM12HF

AP270170210153


New Super SharpTM Earth MetalTM disk blades.Edge stays 5 TIMES SHARPER to cut residue from BT crops.

87442983 20” x 5mm Disk Blade fits Case IH Disks w/ 1.5” Round Hole $37.75 $28.09

87442993 22” x 5mm Disk Blade fits Case IH Disks with 1.5” Round Hole $44.25 $37.47

87618084 20” x 4mm Disk Blade fits IH Disks with 1-1/8” Square Hole $35.75 $25.95

87618089 22” x 5mm Disk Blade fits IH Disks with 1-1/8” Square Hole $44.25 $36.99ST491A Heavy Duty Gang Disk Bearing for most IH Disks $46.36 $37.29123096A2 Wheel Bearing Kit for most Case IH Disks $74.28 $59.4963881C92 Wheel Bearing Kit for most IH Disks $69.62 $57.39

601986R1 2” Straight Point $14.25 $11.49

594545R1 3” Twisted LH Shovel $18.49 $16.59

594546R1 3” Twisted RH Shovel $18.49 $16.59

812384C3 3.5” Twisted LH Shovel $26.20 $22.68

812385C3 3.5” Twisted RH Shovel $26.20 $22.68 28597R1 Gang Disc-Conser-Till $52.18 $44.36

Genuine Case IH Disk Parts

Case IH Maxxi-Point and Maxxi-Width are made with Earth MetalTM steel that wears up to 20% longer than regular steel sweeps.

CASE IH CHISEL PLOWS & CONSER-TILL PARTS

CASE IH & DMI CHISEL PARTS

GLENCOE & OTHER TILLAGE PARTS

M&W EARTHMASTER PARTS

SL124L 4” Twisted L $20.96 $18.86

SL124R 4” Twisted R $20.96 $18.86

SSP22L 4” Twisted Assy - Point L $12.75 $11.47

SSP22R 4” Twisted Assy - Point R $12.75 $11.47

SSM24L Moldboard L $19.33 $17.40

SSM24R Moldboard R $19.33 $17.40

SSF20L Frog L $28.65 $25.79

SSF20R Frog R $30.86 $27.69

SL124


Have us sharpen the blades on your

Case IH 330 True-Tandem Turbo Disk

ONLY $9PER BLADE

Have “like new”

blades in minutes

STOL

LER SE

RVICE

S

Moisture TesterPart #B96650Reg Price $233.00Sale Price $204.59

MT-16 GRAIN MOISTURE TESTERFeatures:•Direct read-out for 16 grain:

Barley, Canola, Corn, Flax, Oats, Rice (2), Rye, Sorghum, Soybeans, Sunflower (2), & Wheat (4)

•Each scale can be adjusted to match local elevator

•Automatically averages up to 99 test results

•Includes sturdy carrying case with strap

•2 year warranty in North America


1 Camera SystemPart #ZAEVOS7MDCL1BReg Price $300.00Sale Price $269.99

ToughCam Digital Wireless Observations System Part #ZAEWVOS5MDCL1BOne Camera Wireless SystemReg Price $600.00Sale Price $539.95

2 Camera SystemPart #ZAEVOS7MDCL2BReg Price $400.00Sale Price $359.99

MT-16 GRAIN MOISTURE TESTER

GENERATORS

Stoller International dealerships are distributers for

Katolight & Voltmaster America Generators as well as Industrial Kohler generators.

Contact Chris SteffenGenerator Tech for over 25 years

815-844-6197 (w) 815-674-3668 (c)[email protected]

See us for any size

generator sets from

Small Por-tables to

2 Mega-watt Stationary


PLANTER INSPECTION• Firming/Press Wheels• Shoe & Deflector• Main Drive Wheel• Covering Disc• Depth Control• Marker Discs• Scraper• Seed Metering System• Transmission

• Pivot Transport• Opener Discs• Row Seed Hopper• Granular Chemical• Gauge Wheels• Bulk Fill• Electrical • Firming Point• And MORE!

ONLY

$10 PER ROW

PLANTER INSPECTION

• Press Wheels• Depth Control• Wear Pad on Center post• Seed Tubes• Seals• Marker/Disc Bearings• Transmission• No Till Coulters• Drive Shaft U-Joints

• Centering Rollers• Lift Cylinder for Leaks• Insecticide Clutch• Disk Openers• Check Solenoids• Electric Point Row Clutches• Scraper• Transport Lock Adjustment• And MORE!

Let our qualified service people inspect your Kinze and Case IH planter before you go to the field. Save yourself the costly down time and sign up now! For only $10.00 per row, you can have your Kinze planter inspected by our factory trained technicians. We inspect and discuss what we find.

Then YOU tell us what YOU want done.

ONLY $10 PER ROW

160 Point Combine Inspection

28


102 Point Tractor Inspection Models include STX and 9000 series 4WD Steigers, Magnum, and Maxxumtractors & 88/86/66/90/94 Series tractors....... $12999

400 SERIES ENGINE OVERHAUL A 400 Series Engine Lower Overhaul should be done around 4,000 hour mark. Includes rod & main bearings, gaskets, oil, filters, and labor. Prices starting at.................................$79999

CDC ENGINE TUNE-UP Magnum Tractors and Combines with CDC Engines 1,500 hour tune-up. This includes testing injectors, adjusting valves, checking timing, vibration dampner, fan belt, water pump, belt tensioner, and checking coolant condition. Prices starting at..............................$47999

TRACTOR SERVICEINSPECTION SPECIALS

ONLY $129 99102 POINT INSPECTION

160 Point Combine Inspection Models include all Case IH combines

$239

=

AIR CONDITIONING Convert your tractor or combine’s air conditioning system from R12 coolant to to new style R134A coolant. R12 coolant is almost 6 times higher in price compared to R134A. Prices starting at.................................$37999

160 Point Combine Inspection

FREEPlanter Inspection

29


McFA

RLAN

E

Ask about our NEW McFarlane Quadra-TILL being setup in our shop as you read this!

Give farm equipment expert Fred Gilman a call at 815-848-1018

Fred GilmanStoller’s Tillage Expert

FALLQUADRA-TILL

SPRINGREEL DISK

RELY ON TRUE VERTICAL TILLAGE

With the McFARLANE vertical tillage system a single pass with the QUADRA-TILL in the fall and a single pass with the REEL DISK in the spring will create the perfect seedbed saving time expense, and preparing your fields for spring more quickly.

The Real Vertical Tillage System SEE YOU at the WPS Farm Show

March 27th-29th, 2012

Visit us at Lots #B4509 &

#O4145

McFarlane Mfg. Co. Inc. • 1259 S. Water St. • P.O. Box 100 • Sauk City, WI 53583 • 608-643-3321 • 800-627-8569

MFG. CO. INC.



PREC

ISIO

N

Give Jim a call at 815-791-9795to find out his team of experienced professionals can enhance your farming operation.


We are your source for guidance and application control solutions!


Stoller International Order Form

We look forward to serving you again this fall. Please fax, phone, or e-mail your fall order to us and we will fill the order and call you for pick-up. As always, your business is appreciated. Questions? Feel free to give us a call. We are here to answer your questions.

* Stoller is not responsible for typographical errors in this book

Name:__________________________________________________________________Address_________________________________________________________________Phone:_________________Fax:_______________E-mail:________________________

Qty. Part No. Description Price Total

ORDE

R FOR

M


Orders need to be placed at the Herscher store by 9:00 am on the day of shuttle departure. Contact Roger, Kyle, Wayne, Doug, Cal or Jim at the Herscher store. Orders need to be placed at the Pontiac store by 8:00 am on the day of the shuttle departure. Contact Dale, Clint, Mike, or

Scott at the Pontiac store.

Northeast Shuttle

Manteno West Tim McCorkle FarmBuilding -10:45 am

Manteno EastKevin Reardanz Farm11:15 am

BeecherBill Kass Repair11:45 am

MoneeNew Ag Center12:30 pm

ElwoodWalts Shop12:45 am

MinookaHintzsche Fertilizer1:15 pm

Morris Morris Airport1:50 pm

Runs Monday, Wednesday, Friday. Drop-off times are estimated and not guaranteed depending on size of the orders for that day.

East Shuttle

St. Anne Wm. Hoekstra10:30 am

St. AnneJim Witvoet10:45

MomenceVan Drunen Farms11:15 am

MoroccoJack Storey Farmstead12:05 pm

DonovanHooper Elevator12:25 pm

WatsekaAduro Graphics1:10 pm

GilmanFast Dist. 1:30 pm

Piper CityF&R Trailer Sales1:45 pm

Parts Shuttle

Meet our Fearless

Shuttle Drivers

Clint Steffen David Wettstein Craig Duncan

PART

S SHU

TTLE

ROUT

E

STOLLER INTERNATIONAL

15521 E. 1830 NORTH RD.PONTIAC, IL 61764

PRSRT STDU.S POSTAGE

PAIDHEYWORTH, ILPERMIT NO. 19


USED EQUIPMENT SEARCH

STOLLERIH.COM

OUR

GRO

WIN

G TE

AM O

F EX

CELL

ENCE

Zach Robinson Cal Mallany Josh Siefker Certified Technician Parts Department Sales Department

Cody Brown Brian Ross Kyle MaschingParts Department Certified Technician Parts Department

Jake Johnson Kelly Goetz Zach GarrelsSetup/ Semi Truck Driver Parts Department Case IH Intern

Cade Moritz Scott Schoenbeck Ricky NavarroPrecision Intern Case IH Intern Service Department

Save the Date!

Documents

2013 Stoller International Fall Catalog