2013 Mi-T-M Industrial Brochure

Mi-T-M Corporation 1971-2013

Pressure Washers 3-33

Air Compressors 34-46

Air Compressor/Generators 47-50

Air Compressor/Generator/Welders 51-55

Air Compressor Accessories 56-60

Portable Generators 61-68

Wet/Dry Vacuums 69-74

Jobsite Boxes 75-77

Portable Heaters 78-87

Safety Certifications 88

Ordering & Warranty Information 89

Product Index

Laura Runde, Customer Service Manager

2 Mi-T-M Corporation 800-553-9053 www.mitm.com

Rich Zurcher, Engineering Manager

Karen Kremer, Office Manager/Outside Sales Coordinator for the Fabrication Department

Wes Klein, Air Compressor Foreman

Every employee at Mi-T-M works hard to ensure that our reputation for manufacturing the best equipment in the industry stays intact. Manufacturing high quality products is our top priority, and to us Performance Under Pressure® is more than a tagline . . . it’s who we are and what we do and it sets us apart from our competition.

Mi-T-M equipment features the most advanced technology available today, and every machine is life and performance tested to ensure it meets your expectations. Whether you are looking for a pressure washer, air compressor, generator, or any other piece of industrial equipment, Mi-T-M offers a wide range of horsepower and capacity to suit your needs.

As you look through this catalog you will see equipment engineered for design, durability and precision, combining rugged industrial construction with the latest technologies. What you won’t see is the unmatched commitment to customer service that is the foundation for our business, but it is there. Our after-sales support personnel is the best in the industry and as trained professionals, they will answer your questions and help you get back to the job.

Founded on a tradition of bringing only the most advanced products to our customers, Mi-T-M continues to set the standard in industries requiring high-performance equipment. We continually strive to live up to this standard in the products we manufacture and the services we provide. Performance Under Pressure®…it’s more than a tagline – it is Mi-T-M.

Designed for all-purpose cleaning, the lightweight CD Series pressure washer is ideal for homeowners and small industrial jobs.

P R E S S U R E W A S H E R S

Cold Water Gasoline Direct DriveCD Series

Pump - Direct drive triplex piston AR pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure valve and forged brass manifold- Thermal relief valve- In-line water strainer- Low pressure detergent injectionEngine- Performance-proven Honda OHV engine with low-oil protectionFrame - Powder coated steel mounting plate with center balanced lift and four rubber isolators

Unit Includes: - Quick connect nozzles (0°, 15°, 25° and detergent nozzle) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch two-piece insulated lanceWarranties

CD-2003-3MHH

Direct drive triplex piston AR pump with ceramic plungers

3YEARLIMITED

HONDA ENGINEWARRANTY

7YEARLIMITED

PUMPWARRANTY


MODEL NUMBER PSI GPM DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) SHIP WT. NET WT.

CD-2003-3MHH 2000 2.7 196cc Honda OHV 18in.x14.5in.x18in. 75 lb. 56 lb.

ACCESSORIES PART NUMBER DESCRIPTION FITS MODELS

50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up CD-2003-3MHH


Cold Water Gasoline Direct Drive

Pump - Direct drive triplex piston AR pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure- Forged brass manifold- Thermal relief valve- In-line water strainer Engine - Performance-proven engine with low-oil protectionFrame - 1-inch powder coated steel tube handles for easier pulling- Powder coated and welded steel base plate- Convenient gun/wand holder and hose wrap- Solid steel axle (threaded on 3500 & 4000-PSI models)- Pneumatic tires and dual rubber isolators

The JP Series features a 1-inch steel extended handle design for excellent balanceand mobility. Equipped with either a powerful Honda engine or performance provenSubaru engine this model has great cleaning power.

JP Series

JP-3003-0MRB

Units Include: - Quick connect nozzles (0°, 15° and 25°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models)Warranties

5YEARLIMITED

SUBARU ENGINEWARRANTY

7YEARLIMITED

PUMPWARRANTY

3YEARLIMITED


www.mitm.com 800-553-9053 Mi-T-M Corporation 5


JP-2403-0MHB 2400 2.4 196cc Honda OHV 37in.x21in.x24.5in. 100 lb. 75 lb.JP-2403-0MRB 2400 2.4 211cc Subaru OHC 37in.x21in.x24.5in. 100 lb. 75 lb.JP-2703-0MHB 2700 2.4 196cc Honda OHV 37in.x21in.x24.5in. 110 lb. 85 lb.JP-2703-0MRB 2700 2.4 211cc Subaru OHC 37in.x21in.x24.5in. 110 lb. 85 lb.JP-3003-0MHB 3000 3.0 270cc Honda OHV 40in.x22.5in.x24.5in. 180 lb. 130 lb.JP-3003-0MRB 3000 3.0 265cc Subaru OHC 40in.x22.5in.x24.5in. 180 lb. 130 lb.JP-3504-0MHB 3500 3.5 389cc Honda OHV 40in.x22.5in.x24.5in. 192 lb. 142 lb.JP-3504-0MRB 3500 3.5 404cc Subaru OHC 40in.x22.5in.x24.5in. 192 lb. 142 lb.JP-4004-1MHB 4000 3.5 389cc Honda OHV 40in.x22.5in.x24.5in. 192 lb. 142 lb.JP-4004-1MRB 4000 3.5 404cc Subaru OHC 40in.x22.5in.x24.5in. 192 lb. 142 lb.

ACCESSORIES & OPTIONS PART NUMBER DESCRIPTION FITS MODELS

50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up All modelsAW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents All modelsCX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector

without having to change tipsAll models

CX-0083 External bypass - Allows more water into the system to protect from heat build-up 2400 to 2700-PSI modelsCX-0084 External bypass - Allows more water into the system to protect from heat build-up 3500 to 4000-PSI models


Cold Water Gasoline Direct DriveFitted with our patented vibration isolation plate, the CA Series

aluminum pressure washer is lightweight yet rugged. CA Aluminum Series

MODEL NUMBER PSI GPM DISPLACEMENT/ENGINE PUMP DIMENSIONS (LxWxH) SHIP WT. NET WT.

CA-2403-0MHB 2400 2.4 196cc Honda OHV AR 39in.x20.5in.x24.5in. 100 lb. 73 lb.CA-2403-0MRB 2400 2.4 211cc Subaru OHC AR 39in.x20.5in.x24.5in. 100 lb. 73 lb.CA-2703-0MHB 2700 2.4 196cc Honda OHV AR 39in.x20.5in.x24.5in. 100 lb. 73 lb.CA-2703-0MKB 2700 2.4 208cc Kohler OHV AR 39in.x20.5in.x24.5in. 100 lb. 73 lb.CA-2703-0MRB 2700 2.4 211cc Subaru OHC AR 39in.x20.5in.x24.5in. 100 lb. 73 lb.CA-3003-0MHB 3000 3.0 270cc Honda OHV AR 42.5in.x23.5in.x24.5in. 155 lb. 105 lb.CA-3003-0MKB 3000 3.0 277cc Kohler OHV AR 42.5in.x23.5in.x24.5in. 155 lb. 105 lb.CA-3003-0MRB 3000 3.0 265cc Subaru OHC AR 42.5in.x23.5in.x24.5in. 155 lb. 105 lb.CA-3504-0MHB 3500 3.5 389cc Honda OHV AR 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-3504-0MRB 3500 3.5 404cc Subaru OHC AR 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-3504-1MHB* 3500 4.0 389cc Honda OHV General 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-4004-0MHB 4000 3.5 389cc Honda OHV AR 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-4004-0MKB 4000 3.5 429cc Kohler OHV AR 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-4004-0MRB 4000 3.5 404cc Subaru OHC AR 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.CA-4004-1MHB* 4000 4.0 389cc Honda OHV General 42.5in.x23.5in.x24.5in. 175 lb. 125 lb.

*Model comes standard with external bypass system and General pump.


50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up All modelsAW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents All modelsCX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical

injector without having to change tipsAll models

CX-0097 External bypass - Allows more water into the system to protect from heat build-up 2400 to 2700-PSI modelsCX-0098 External bypass - Allows more water into the system to protect from heat build-up 3500 to 4000-PSI models except 1MHBCX-0099 External bypass - Allows more water into the system to protect from heat build-up 3000-PSI models

Pump - Direct drive triplex piston AR or General pump with ceramic plungers- General pumps feature an external bypass system which allows more water into the system to protect from heat build-up- Stainless-steel and brass unloader with adjustable pressure- Forged brass manifold- Thermal relief valve- In-line water strainer Engine - Performance-proven engine with low-oil protectionFrame - Light, corrosion resistant aluminum frame- 1-inch aluminum tube handles for easier pulling- Aluminum base plate and solid full-length axle- Convenient nozzle holder for quick connect nozzles- Pneumatic tires and dual rubber isolators

CA-2703-0MKB

5YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

3YEARLIMITED

KOHLER ENGINEWARRANTY

3YEARLIMITED



Units Include: - Quick connect nozzles (0°, 15° and 25°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models)Warranties

Patented vibration isolation plate with four rubber isolators for reduced movement

The popular CBA Series of pressure washers feature a lightweight aluminum frame, base plate and belt guard; making them one of the lightest weight industrial-quality models in the industry.


Cold Water Gasoline Belt DriveCBA Aluminum Series

Pump - Belt drive triplex piston AR or General pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure- Forged brass manifold- Thermal relief valve- Water filter with clear sleeve for screen inspectionEngine - Performance-proven engine with low-oil protectionFrame - Light, corrosion resistant aluminum frame- 1-inch aluminum tube handles for easier pulling- Aluminum base plate- Two-piece belt guard for quick access to belts- Solid 7⁄8-inch diameter full-length threaded axle- Convenient nozzle holder for quick connect nozzles- Pneumatic tires and dual rubber isolators

Component - Dual cogged belt drive system for increased belt lifeUnits Include:- Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 48-inch lance with rubber gripWarranties


CBA-3504-0MHB 3500 3.7 389cc Honda OHV AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-3504-0MKB 3500 3.7 429cc Kohler OHV AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-3504-0MRB 3500 3.7 404cc Subaru OHC AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-3504-1MHB* 3500 4.0 389cc Honda OHV General 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-4004-0MHB 4000 3.4 389cc Honda OHV AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-4004-0MKB 4000 3.4 429cc Kohler OHV AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-4004-0MRB 4000 3.4 404cc Subaru OHC AR 47in.x27.5in.x28.5in. 215 lb. 165 lb.CBA-4004-1MHB* 4000 3.5 389cc Honda OHV General 47in.x27.5in.x28.5in. 215 lb. 165 lb.

*Model comes standard with external bypass system and General pump.




CX-0082 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the pump All models except 1MHB

CBA-3504-1MHB

General pumps feature an external bypass system which allows more water into the system to protect from heat build-up

Patented vibration isolation plate with four rubber isolators for reducedmovement

5YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

3YEARLIMITED


3YEARLIMITED



This rugged belt-driven unit is built with an all-steel frame and base plate and can handle even the toughest environments.


Cold Water Gasoline Belt DriveJCW Series

Pump - Belt drive triplex piston AR pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure- Forged brass manifold- Thermal relief valve- Water filter with clear sleeve for screen inspectionEngine - Performance-proven engine with low-oil protectionFrame - 11⁄4-inch powder coated steel tube handles (1-inch on 2400 to 2700-PSI models)- Powder coated steel base plate with welded reinforcement for reduced vibration- Two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient gun/wand holder and hose wrap- Solid steel threaded axle- Convenient nozzle holder for quick connect nozzles- Pneumatic tires and dual rubber isolators


JCW-2403-0MHB 2400 2.8 196cc Honda OHV 37.5in.x22in.x25in. 171 lb. 121 lb.JCW-2403-0MRB 2400 2.8 211cc Subaru OHC 37.5in.x22in.x25in. 171 lb. 121 lb.JCW-2703-0MHB 2700 2.4 196cc Honda OHV 37.5in.x22in.x25in. 171 lb. 121 lb.JCW-2703-0MRB 2700 2.4 211cc Subaru OHC 37.5in.x22in.x25in. 171 lb. 121 lb.JCW-3504-0MHB 3500 3.7 389cc Honda OHV 39.5in.x28.5in.x26in. 245 lb. 191 lb.JCW-3504-0MRB 3500 3.7 404cc Subaru OHC 39.5in.x28.5in.x26in. 245 lb. 191 lb.JCW-4004-1MHB 4000 3.4 389cc Honda OHV 39.5in.x28.5in.x26in. 249 lb. 195 lb.JCW-4004-1MRB 4000 3.4 404cc Subaru OHC 39.5in.x28.5in.x26in. 249 lb. 195 lb.




CX-0082 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the pump 3500 to 4000-PSI modelsCX-0085 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the base plate 3500 to 4000-PSI models

JCW-3504-0MRB

5YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

3YEARLIMITED



Component - Dual cogged belt drive system for increased belt lifeUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber grip (48-inch on 3500 & 4000-PSI models)Warranties

Built for industrial cleaning jobs, the CW Premium Series is deemed the workhorse of the Mi-T-M industrial cold water pressure washer line.


Cold Water Gasoline Belt DriveCW Premium Series

Pump - Belt drive triplex piston General pump with ceramic plungers- Stainless-steel and brass unloader with fixed pressure- Forged brass manifold (Nickel plated brass on 4000-PSI models)- Thermal relief valve- Water filter with clear sleeve for screen inspectionEngine - Performance-proven engine with low-oil protectionFrame - 11⁄4-inch powder coated steel tube handles - Powder coated 1⁄4-inch steel base plate- Two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient gun/wand holder and hose wrap- Solid steel threaded axle- Convenient nozzle holder for quick connect nozzles- Pneumatic tires and dual rubber isolators

Component - Heavy-duty dual cogged belt drive system for increased belt lifeUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber grip (48-inch on 3500 & 4000-PSI models)Warranties


CW-2505-4MGH 2500 4.4 389cc Honda OHV 45.5in.x28in.x26in. 290 lb. 216 lb.CW-3004-4MGH 3000 3.5 389cc Honda OHV 45.5in.x28in.x26in. 290 lb. 216 lb.CW-3504-4MGH 3500 3.7 389cc Honda OHV 46in.x28in.x30in. 290 lb. 216 lb.CW-3504-4MGR 3500 3.7 404cc Subaru OHC 46in.x28in.x30in. 290 lb. 216 lb.CW-4004-4MGH 4000 3.5 389cc Honda OHV 46in.x28in.x30in. 290 lb. 216 lb.CW-4004-3MV0* 4000 4.0 480cc Vanguard OHV 46in.x28in.x30in. 330 lb. 256 lb.

*Electric start (battery included).




CX-0045 Electric start (battery included) - For easy starting All Honda modelsCX-0054 Roll cage - Designed for cold water pressure washers to protect equipment, comes with a lifting hook, 11⁄4-inch powder

coated steel tubingAll Honda models & CW-3504-4MGR

CX-0055 Roll cage - See CX-0054 for option description CW-4004-3MV0

5YEARLIMITED


10YEARLIMITED

PUMPWARRANTY

3YEARLIMITED


2YEARLIMITED

VANGUARD ENGINEWARRANTY

External bypass system allows more water into the system to protect from heat build-up

CW-4004-4MGH


One of the most powerful cold water pressure washers on the market today, this unit is jobsite ready with 11⁄4-inch roll cage, handles and lifting hook.


Cold Water Gasoline Belt DriveCWC Premium Series

Pump - Belt drive triplex piston AR or General pump with ceramic plungers- Stainless-steel and brass unloader- Forged brass manifold- Thermal and safety relief valves- Water filter with clear sleeve for screen inspection (High capacity water filter on CWC-3008-3MGH)- Pump oil drainEngine - Performance-proven engine with low-oil protection- Electric start (battery included)- Engine oil drainFrame - Patented frame design includes powder coated steel frame with 11⁄4-inch roll cage, handles and lifting hook- Two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient gun/wand holder and hose wrap- Solid steel threaded axles- Convenient nozzle holder for quick connect nozzles- Pneumatic tires with locking tire brake

Components - Heavy-duty dual cogged belt drive system for increased belt life- Easy start valve- Polyethylene fuel tank will not rustUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors (CWC-5004, CWC-5005 & CWC-6004 models)- 50-foot x 1⁄2-inch hose with quick connects, swivel and bend restrictors on CWC-3008 model- Professional-grade insulated trigger gun with safety lock-off- 48-inch lance with rubber gripWarranties


CWC-3008-3MGH 3000 8.0 688cc Honda OHV General 43in.x27.75in.x36in. 511 lb. 388 lb.CWC-5004-3MAH 5000 4.0 688cc Honda OHV AR 43in.x27.75in.x36in. 501 lb. 378 lb.CWC-5004-3MGH 5000 4.0 688cc Honda OHV General 43in.x27.75in.x36in. 501 lb. 378 lb.CWC-5005-3MGH 5000 5.0 688cc Honda OHV General 43in.x27.75in.x36in. 511 lb. 388 lb.CWC-6004-3MGH 6000 3.7 688cc Honda OHV General 43in.x27.75in.x36in. 511 lb. 388 lb.

OPTIONSPART NUMBER DESCRIPTION FITS MODELS

AW-3000-0035 Sand injector - Remove coatings from steel and concrete surfaces CWC-5004 & CWC-6004 modelsAW-7500-0035 Rotating nozzle - Increase your cleaning power and decrease your cleaning time, 0° spray with 25° coverage CWC-6004-3MGH

CWC-6004-3MGH

CWC-5004-3MAHCWC-5004-3MGHCWC-5005-3MGH

11.5-gallon capacity fuel tank allows for 8-hour running time

3YEARLIMITED


7YEARLIMITED

PUMPWARRANTY


CW-3004-0MKD

Diesel powered pressure washers are often chosen for the heavy-duty cleaning power needed by shipping and marine professionals. Boats, decks, docks, and other marine equipment are constantly exposed to the damaging effects of saltwater and require constant cleaning. The oil and mining industries are also applications where diesel powered pressure washers outperform their gas and electric counterparts.


Cold Water Diesel Belt DriveCW Premium Series

Pump - Belt drive triplex piston General pump with ceramic plungers- Stainless-steel and brass unloader with fixed pressure- Forged brass manifold- Thermal relief valve- Water filter with clear sleeve for screen inspection- External bypass system allows more water into the system to protect from heat build-upEngine - Professional Kohler diesel engineFrame - Powder coated steel tube handles, base plate and enclosed belt guard- Convenient hose wrap and gun/wand holder- Solid steel threaded axle- Pneumatic tires and dual rubber isolators

Component - Dual cogged belt drive system for increased belt lifeUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber gripWarranties

MODEL NUMBER PSI GPM HORSEPOWER/ENGINE FUEL TANK CAPACITY DIMENSIONS (LxWxH) SHIP WT. NET WT.

CW-3004-0MKD 3000 3.9 9.8 HP Kohler 1.3 gallon 46in.x28in.x30in. 321 lb. 245 lb.


50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up CW-3004-0MKDAW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CW-3004-0MKDCX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector

without having to change tipsCW-3004-0MKD

CX-0044 Electric start (battery included) - For easy starting CW-3004-0MKDCX-0056 Roll cage - Designed for cold water pressure washers to protect equipment, comes with a lifting hook, 11⁄4-inch powder coated

steel tubingCW-3004-0MKD

3YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

Belt drive triplex piston General pump with ceramic plungers


New Kohler Model

MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPE DIMENSIONS (LxWxH) SHIP WT. NET WT.

CD-1002-3MUH 1000 2.0 1.5 HP, 120V, 1Ø, 12.5A AR NEMA 5-15P 20in.x11.5in.x14in. 70 lb. 58 lb.CD-1002-2MUH* 1000 2.0 1.5 HP, 120V, 1Ø, 12.5A General NEMA 5-15P 20in.x11.5in.x14in. 71 lb. 66 lb.CD-1502-3MUH 1500 2.0 2.0 HP, 120V, 1Ø, 17.0A AR NEMA 5-20P 20in.x11.5in.x14in. 76 lb. 70 lb.CD-1502-2MUH* 1500 2.0 2.0 HP, 120V, 1Ø, 17.0A General NEMA 5-20P 20in.x11.5in.x14in. 76 lb. 70 lb.

*Pump accepts incoming water up to 175°F.


18-0370 Rotating nozzle - Increase your cleaning power and decrease your cleaning time CD-1502 models18-0371 Rotating nozzle - Increase your cleaning power and decrease your cleaning time CD-1002 models50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up All modelsCX-0030 50-foot high pressure hose - For when you need extra hose for added mobility All models

Pump - Direct drive triplex piston AR or General pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold- Thermal and safety relief valves- In-line water strainer- Adjustable low pressure detergent injection- Pump accepts incoming water up to 175°F (2MUH models)Motor- Totally enclosed fan-cooled electric motor with thermal overload protection- 35-foot, 15-amp power cord (20-amp plug on CD-1502 models) with ground fault circuit interrupter (GFCI)Frame - Powder coated steel mounting plate with center balanced lift and four rubber isolators

Designed for all-purpose cleaning, the lightweight CD Series pressure washers are ideal for homeowners and small industrial jobs. This electric model is perfect for applications

where exhaust fumes are prohibited.


Cold Water Electric Direct Drive

Units Include: - Variable high/low pressure nozzle with adjustable spray pattern (3MUH models)- 15° high/low pressure nozzle (2MUH models)- 25-foot x 3⁄8-inch non-marking hose with quick connects and swivel- Professional-grade insulated trigger gun with safety lock-off- 36-inch two-piece insulated lanceWarranties

NEMA 5-15P, 15-amp plug


CD-1502-2MUH

CD Series

1YEARLIMITED

ELECTRIC MOTORWARRANTY

7YEARLIMITED

PUMPWARRANTY


Designed for medium duty, commercial use the portable electric JP Series features quiet operation and no exhaust which is ideal for indoor applications where exhaust fumes are prohibited.


Cold Water Electric Direct DriveJP Series

JP-2503-1ME1

USA & Canada: JP-1002 &JP-1502 Models

JP-2003, JP-2503 & JP-3004 Models



NEMA L15-20P,20-amp plug

NEMA 6-20P,20-amp plug




MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPE DIMENSIONS (LxWxH) SHIP WT. NET WT.

JP-1002-3ME1* 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A AR NEMA 5-15P 37in.x21in.x24.5in. 120 lb. 90 lb.JP-1002-2ME1*# 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A General NEMA 5-15P 37in.x21in.x24.5in. 120 lb. 90 lb.JP-1502-3ME1* 1500 2.0 2.0 HP, 120V, 1Ø, 17.0A AR NEMA 5-20P 37in.x21in.x24.5in. 120 lb. 90 lb.JP-1502-2ME1*# 1500 2.0 2.0 HP, 120V, 1Ø, 17.0A General NEMA 5-20P 37in.x21in.x24.5in. 120 lb. 90 lb.JP-2003-3ME1* 2000 2.8 4.0 HP, 230V, 1Ø, 16.0A AR NEMA 6-20P 37in.x21in.x24.5in. 162 lb. 112 lb.JP-2503-1ME1* 2500 3.2 6.0 HP, 230V, 1Ø, 24.1A AR NEMA 6-30P 44in.x26in.x27in. 275 lb. 225 lb.JP-2503-0ME3 2500 3.2 6.0 HP, 230V, 3Ø, 15.0A or

6.0 HP, 460V, 3Ø, 7.5AAR NEMA L15-20P 44in.x26in.x27in. 275 lb. 225 lb.

JP-3004-1ME1 3000 3.9 8.0 HP, 230V, 1Ø, 34.5A AR NEMA 6-50P 44in.x26in.x27in. 275 lb. 225 lb.JP-3004-0ME3 3000 3.9 8.0 HP, 230V, 3Ø, 20.0A or

8.0 HP, 460V, 3Ø, 10.0AAR NEMA L15-30P 44in.x26in.x27in. 275 lb. 225 lb.

*35-foot cord with ground fault circuit interrupter (GFCI). #Pump accepts incoming water up to 175°F.


50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up All modelsCX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector


CX-0030 50-foot high pressure hose - For when you need extra hose 1000 to 2000-PSI modelsCX-0066 460V on 6.0-HP, 3-phase models - For when you have 460V of power available JP-2503-0ME3CX-0067 460V on 8.0-HP, 3-phase models - For when you have 460V of power available JP-3004-0ME3

Pump - Direct drive triplex piston AR or General pump with ceramic plungers- Stainless-steel and brass unloader with adjustable pressure- Forged brass manifold- Thermal and safety relief valves- In-line water strainer - Adjustable low pressure detergent injectionMotor - Totally enclosed fan-cooled electric motor- 35-foot power cord (ground fault circuit interrupter, GFCI, on 1.5 to 6.0-HP single-phase models) (10-foot power cord on 8.0-HP models)- NEMA 5-20P, 20 amp plug (1500-PSI models)Frame - 1-inch powder coated steel tube handles for easier pulling- Powder coated and welded steel base plate- Convenient gun/wand holder and hose wrap- Solid steel axle (threaded on 2000 to 3000-PSI models)- Pneumatic tires and dual rubber isolators

Units Include: - Variable high/low pressure nozzle on 1000 to 2000-PSI models- Quick connect nozzles (0°, 15° and 25°) on 2500 & 3000-PSI models- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors (25-foot on JP-1002, JP-1502 & JP-2003 models)- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber gripWarranties

1YEARLIMITED


7YEARLIMITED

PUMPWARRANTY


MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PLUG TYPE DIMENSIONS (LxWxH) SHIP WT. NET WT.

CW-2405-4ME1 2400 4.6 7.5 HP, 230V, 1Ø, 35.7A NEMA 6-50P 46in.x28in.x30in. 345 lb. 333 lb.CW-2405-4ME3* 2400 4.6 8.0 HP, 230V, 3Ø, 24.7A or 8.0 HP, 460V, 3Ø, 11.5A NEMA L15-30P 46in.x28in.x30in. 255 lb. 243 lb.CW-3004-4ME1 3000 3.5 7.5 HP, 230V, 1Ø, 35.0A NEMA 6-50P 46in.x28in.x30in. 350 lb. 338 lb.CW-3004-4ME3* 3000 3.5 8.0 HP, 230V, 3Ø, 23.0A or 8.0 HP, 460V, 3Ø, 11.5A NEMA L15-30P 46in.x28in.x30in. 330 lb. 318 lb.CW-3005-0ME1 3000 4.8 10.0 HP, 230V, 1Ø, 37.5A NEMA 6-50P 45.5in.x32.5in.x30in. 470 lb. 396 lb.CW-3005-0ME3* 3000 4.8 10.0 HP, 230V, 3Ø, 25.6A or 10.0 HP, 460V, 3Ø, 12.8A NEMA 15-50P 45.5in.x32.5in.x30in. 450 lb. 376 lb.CW-4004-0ME3* 4000 3.9 15.0 HP, 230V, 3Ø, 40.0A or 15.0 HP, 460V, 3Ø, 20.0A NEMA 15-50P 45.5in.x32.5in.x30in. 505 lb. 431 lb.CW-5004-0ME3* 5000 4.0 15.0 HP, 230V, 3Ø, 40.0A or 15.0 HP, 460V, 3Ø, 20.0A NEMA 15-50P 45.5in.x32.5in.x30in. 505 lb. 431 lb.

*460V motors available as options.


50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up All modelsAW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents All modelsCX-0003 460V, 3-phase models - For when you have 460V of power available CW-2405-4ME3 & CW-3004-4ME3 CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical

injector without having to change tipsAll models

CX-0057 460V, 3-phase models - For when you have 460V of power available CW-4004-0ME3 & CW-5004-0ME3CX-0062 460V, 3-phase models - For when you have 460V of power available CW-3005-0ME3

Pump - Belt drive triplex piston General pump with ceramic plungers- Stainless-steel and brass unloader- Forged brass manifold- Thermal relief valve- Water filter with clear sleeve for screen inspectionMotor- Totally enclosed fan-cooled electric motor with thermal overload protection- 10-foot power cordFrame - Powder coated steel tube handles and base plate- Totally enclosed powder coated steel belt guard- Convenient gun/wand holder and hose wrap- Solid steel threaded axle- Pneumatic tires and dual rubber isolators

The electric version of the CW Series is perfect for heavily-soiled commercialand industrial equipment that requires indoor cleaning. Much quieter than

the gas models, there is no need to worry about proper ventilationbecause of exhaust fumes.


Cold Water Electric Belt Drive

Component- Heavy-duty dual cogged belt drive system for increased belt lifeUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- 36-inch lance with rubber grip (48-inch on 4000 & 5000-PSI models)Warranties

CW-3004-4ME3

CW Premium Series



G


1YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

External bypass system allows more water into the system to protect from heat build-up


The stationary version of the CW electric series is designed for wash bays, golf courses and restaurant applications where mobility isn’t necessary. The stainless-steel package design ensures longevity even in the toughest environments.


Cold Water Electric Belt DriveCW Premium Series

CW-2004-SME1 shown with standard low pressure detergent injector





MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PLUG TYPE DIMENSIONS (LxWxH) SHIP WT. NET WT.

CW-1003-SME1 1000 2.5 2.0 HP, 120V, 1Ø, 18.8A NEMA 5-20P 29.5in.x20.5in.x15in. 222 lb. 172 lb.CW-2004-SME1 2000 3.9 6.0 HP, 230V, 1Ø, 24.1A NEMA 6-30P 29.5in.x20.5in.x15in. 272 lb. 214 lb.CW-2004-SME3 2000 3.9 6.0 HP, 230V, 3Ø, 15.0A NEMA L15-20P 29.5in.x20.5in.x15in. 262 lb. 204 lb.CW-3004-SME3 3000 3.5 8.0 HP, 230V, 3Ø, 20.0A NEMA L15-30P 29.5in.x20.5in.x15in. 292 lb. 234 lb.

*208V & 460V motors available as options.


AW-9501-0000 Stainless-steel wall mounting bracket - Provides a permanent location for your pressure washer in a shop or plant facility All modelsAW-9502-0000 Powder coated steel wall mounting bracket - Provides a permanent location for your pressure washer in a shop or plant facility All modelsCX-0069 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart All modelsCX-0076 460V, 3-phase models - For when you have 460V of power available CW-2004-SME3CX-0077 460V, 3-phase models - For when you have 460V of power available CW-3004-SME3CX-0078 Remote box - Adds control box which may be mounted away from unit to control on/off, N/A on models with auto start/stop All modelsCX-0087 208V, single-phase - For when you have 208V of power available CW-2004-SME1CX-0088 208V, 3-phase models - For when you have 208V of power available CW-2004-SME3CX-0090 208V, 3-phase models - For when you have 208V of power available CW-3004-SME3CX-0096 Hour meter - Displays number of hours unit has been in operation All models

Pump - Belt drive triplex piston General pump with ceramic plungers- Stainless-steel and brass unloader- Forged brass manifold- Thermal relief valve- In-line water strainer- Quick connect low pressure detergent injection- Bypass systemMotor - Open drip-proof motor (1000 & 3000-PSI models)- Totally enclosed fan-cooled electric motor with manual thermal overload protection (2000-PSI models)- 4-foot electrical cord with ground fault circuit interrupter (NEMA 5-20P, 20-amp plug on CW-1003-SME1)Frame - Stainless-steel base and frame- Removable panel for pump access- Easy-to-access cabinet design- Four rubber isolators

Components - Dual cogged belt drive system for increased belt life- Conveniently located on/off switch- Time delay shutdown will shut unit off automatically when trigger gun is released and timer reaches settingUnits Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch pressure hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- Adjustable pressure insulated dual lanceWarranties

CW-2004-SME3 shown on optional stainless-steel wall mounting bracket(AW-9501-0000)

1YEARLIMITED


7YEARLIMITED

PUMPWARRANTY

Belt drive triplex piston General pump with ceramic plungers accepts incoming water up to 175°F



Hot Water Designs

1. Large capacity exhaust tubes allow proper exhausting of combustion gases.2. When troubleshooting a burner problem, the spark can easily be checked within seconds through the convenient sight glass.3. Continuous wrap tubing coil eliminates butt welds that can cause leaks. The coil is lightweight and designed for easy replacement and durability.4. The insulation pad is designed for easy replacement and durability.5. Coil inlet/outlet connections and convenient coil drain allow for easy draining of all water in coil to prevent freezing.6. The combustion chamber drain allows for easy draining of water and fuel build-up.7. With Mi-T-M's triple air flow design, the temperatures on the outer wrap are kept low enough to eliminate the need for coil insulation. This also increases the efficiencies of the fuel being burned by the ignition on the down-flow and the exhaust on the up-flow of the burner chamber.8. Single wire-braided fuel hose prevents leakage, protects the system and won't crack or kink.9. Electrodes and nozzle assembly are at top of burner for easy maintenance and troubleshooting.

HSP & HSE Series Burner Design

GF

D

C

E

IJ

H

B

In 1999, Mi-T-M Corporation received the patent for a unique ignition/firing system, Electro Magnetic Firing (EMF), which produces enough voltage for operation and proper burning of the HSP Series of hot water pressure washers.

This system is designed with two sets of magnets that are used to produce electricity. The first set of magnets produces a low voltage of about 12 to 14 volts when passed by a coil known as a stator. This voltage is required for operation of the on/off switch, pressure and high limit switch, and the fuel solenoid.

The second set of magnets passes by an ignition coil which produces a high voltage in the tens of thousands of volts. The spark is generated across the electrode gap and is enough to create proper ignition of either No. 1 diesel, No. 2 diesel or kerosene.

1. Engine sheave and dual set screw mount maintains proper alignment of pump shaft key.2. The belt tension sheave creates proper belt tension so fuel pump discharges fuel upon demand.3. The long lasting, non-corrosive flexible drive coupler protects EMF system if fuel pump locks up.4. Fuel pump is a durable high quality pump that will deliver No. 1 or No. 2 diesel fuel or kerosene.5. Stator coil/magnets are a low maintenance system that provide solenoid control voltage.6. Fan provides burner air for proper combustion and clean exhaust smoke. It has an easily accessible air flow control.7. Ignition coil provides voltage to electrodes for proper spark voltage, allowing accurate ignition of fuel every time the trigger is pulled. The ignition coil has a long life, is easily replaced and has a proven track record in the industry.

HSP Series Patented EMF System

G

F

D

C

E

H

B

EMF system eliminates the need for a 12V battery.


One of our most popular hot water units, the HSP Series features our patented Electro Magnetic Firing (EMF) system which eliminates the need for a 12V battery to operate the burner. The top-fired heat exchanger is designed for easy maintenance.


Hot Water Gasoline Direct DriveHSP Series

Pump - Direct drive triplex piston AR or Mi-T-M pump with ceramic plungers- Stainless-steel and brass unloader valve- Forged brass manifold- Thermal relief valve- External bypass system allows more water into the system to protect from heat build-up (2500-PSI models)- Low pressure detergent injection (3000 & 3500-PSI models)Engine - Performance-proven engine with low-oil protection and recoil startFrame - Reinforced powder coated steel tube frame with center balanced lifting hook- Powder coated steel hose reel mounting bracket (3000 & 3500-PSI models)- Wand holder- Solid steel threaded axles- Four pneumatic tires with locking tire brakeComponents- High quality fuel filter/water separator ensures clean fuel supply- Complete system diagnostic board- On/off burner switch- Pressure and high limit safety controls- No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time)- Polyethylene burner fuel tank- Easy coil drain helps prevent freezing in cold weather- Energy efficient top-fired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance

Units Include: - Quick connect nozzles (0°, 15°, 25° and 40°) (2500-PSI models)- 15° fixed and detergent nozzle (3000 & 3500-PSI models)- 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors (Screw connects on 3000 & 3500-PSI models)- Professional-grade insulated trigger gun with safety lock-off- Adjustable pressure insulated dual lanceMiscellaneous- Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°FWarranties

HSP-2503-0MMH

Patented Electro Magnetic Firing (EMF) system

5YEARLIMITED


3YEARLIMITED


3YEARLIMITED

COILWARRANTY

7YEARLIMITED

PUMPWARRANTY

3YEARLIMITED



MODEL NUMBER PSI GPM DISPLACEMENT/ENGINE PUMPFUEL TANK CAPACITY

BURNER FUEL TANK CAP.

BURNER FUEL CONS.

BTU PER HOUR DIMENSIONS (LxWxH) SHIP WT. NET WT.

HSP-2503-0MMH 2500 2.7 196cc Honda OHV Mi-T-M 0.97 gallon 4.0 gallon 1.53 gph 205,000 43in.x29.5in.x36.5in. 411 lb. 295 lb.HSP-2503-0MMS 2500 2.7 211cc Subaru OHC Mi-T-M 0.95 gallon 4.0 gallon 1.53 gph 205,000 43in.x29.5in.x36.5in. 411 lb. 295 lb.HSP-3003-3MGH 3000 2.9 270cc Honda OHV AR 1.59 gallon 5.5 gallon 1.84 gph 253,000 43in.x30in.x41in. 530 lb. 407 lb.HSP-3003-3MGR 3000 2.9 265cc Subaru OHC AR 1.59 gallon 5.5 gallon 1.84 gph 253,000 43in.x30in.x41in. 530 lb. 407 lb.HSP-3504-3MGH 3500 3.3 389cc Honda OHV AR 1.70 gallon 5.5 gallon 2.14 gph 294,000 43in.x30in.x41in. 551 lb. 428 lb.HSP-3504-3MGK 3500 3.3 429cc Kohler OHV AR 1.70 gallon 5.5 gallon 2.14 gph 294,000 43in.x30in.x41in. 551 lb. 428 lb.HSP-3504-3MGR 3500 3.3 404cc Subaru OHC AR 1.70 gallon 5.5 gallon 2.14 gph 294,000 43in.x30in.x41in. 551 lb. 428 lb.


20-0464A52 Rain cap - Protects boiler from moisture build-up when unit is left outside 3000 to 3500-PSI models50-0161 High pressure detergent injector - High pressure water mixes with detergent to clean even the heaviest build-up 2500-PSI modelsHX-0098 Electric start (battery included) - For easy starting HSP-3504-3MGHHX-0219 Electric start (battery included) - For easy starting HSP-3504-3MGRHX-0233 Adjustable thermostat - Operator is able to adjust outlet water temperature 2500-PSI modelsHX-0234 Low pressure detergent injector - Allows the user to apply the recommended detergents 2500-PSI modelsHX-0236 Hour meter - Displays the number of hours unit has been in operation 2500-PSI models

New2500-PSI

Models

Pump - Belt drive triplex piston AR or General pump with ceramic plungers- Factory preset unloader- Forged brass manifold- 80-mesh, high volume, stainless-steel screen inlet water strainerEngine- Industrial gasoline or diesel engine with electric start (battery included)Frame - Heavy-duty powder coated 11⁄2-inch steel square tube frameComponents - 2900-watt generator delivers clean power to the burner- Pressure relief valve protects against excessive system pressure- No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time)- Polyethylene burner and engine fuel tanks- 1⁄2-inch schedule 80-coil with stainless-steel wrap- Heavy-duty dual cogged belt drive system- High quality fuel filter/water separator ensures clean fuel supply

If you are looking for a hot water pressure washer system to mount on either a single or dual-axle trailer, the HS Series is a popular option. The heavy-duty 1½-inch steel square tube

frame is powder coated for durability and the control panel is easily accessible.


Hot Water Gasoline/Diesel Belt Drive

HS-4004-1MAH

HS Series

Units Include: - Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun and adjustable pressure insulated dual lance with safety lock-offMiscellaneous- Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°FWarranties

GASOLINE MODELS

MODEL NUMBER PSI GPM DISPLACEMENT/ENGINE PUMPFUEL TANK CAPACITY


BURNER FUEL CONS.


HS-3005-0MGV 3000 4.8 480cc Vanguard OHV General 10.0 gallon 10.0 gallon 3.37 gph 471,800 50in.x.34in.x46in. 816 lb. 710 lb.HS-3505-1MGH 3500 4.7 688cc Honda OHV General 10.0 gallon 10.0 gallon 3.37 gph 471,800 50in.x34in.x46in. 854 lb. 750 lb.HS-3506-1MGH 3500 5.6 688cc Honda OHV General 10.0 gallon 10.0 gallon 3.37 gph 471,800 50in.x34in.x46in. 864 lb. 760 lb.HS-4004-1MAH#+ 4000 4.0 688cc Honda OHV AR 10.0 gallon 10.0 gallon 3.37 gph 471,800 50in.x34in.x46in. 854 lb. 750 lb.

DIESEL MODELS

MODEL NUMBER PSI GPMHORSEPOWER/ENGINE PUMP

FUEL TANK CAPACITY


BURNER FUEL CONS.


HS-3006-0MDK 3000 5.6 15.5 HP Kubota General 10.0 gallon 10.0 gallon 3.37 gph 471,800 56.5in.x34in.x46in. 940 lb. 836 lb.HS-3505-0MDK 3500 4.7 15.5 HP Kubota General 10.0 gallon 10.0 gallon 3.37 gph 471,800 56.5in.x34in.x46in. 940 lb. 836 lb.HS-4005-0MDK+ 4000 4.5 15.5 HP Kubota General 10.0 gallon 10.0 gallon 3.37 gph 471,800 56.5in.x34in.x46in. 940 lb. 836 lb.

#Model equipped with AR pump, all other models equipped with General pumps.+Model equipped with trapping unloader, all other models equipped with K7 flow actuated unloader.

3YEARLIMITED

KUBOTA ENGINEWARRANTY

3YEARLIMITED


3YEARLIMITED

COILWARRANTY

7YEARLIMITED

PUMPWARRANTY

2YEARLIMITED

VANGUARD ENGINEWARRANTY



Hot Water Gasoline/Diesel Belt DriveHS Series

HS-3505-0MDK


20-1070A18 Removable painted front panel - Provides a protective panel and gives unit a more finished look All models50-0177 Stack adapter - Allows 8-inch flue pipe to be installed to boiler exhaust port All models850-0324 Gasket (for 50-0177) - Seals between 50-0177 stack adapter and boiler housing All modelsAW-5740-0000 Wheel kit - Allows unit to become portable All modelsAW-6000-1006 Hot water skid equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-

backed polyester, water resistant, drawstrings to secure coverAll models

AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents All models, except HS-3506 & HS-3006

HX-0130 Three-way ball valve - Allows pressure washer to be operated from garden hose/float tank or trailer supply tank by adjusting ball valve lever

All models

HX-0131 High pressure detergent injection (K7) - Supplies soap injection through the high pressure pump while spraying; pressure washers with K7 flow actuated unloaders only

3000 to 3500-PSI models

HX-0133 Steam combination 250°F (K7) - Increases outlet temperature to 250°F. Steam option for models equipped with K7 flow actuated unloaders

HS-3005 & HS-3505 models

HX-0135 Steam combination 250°F (K7) - See HX-0133 for option description HS-3506-1MGHHX-0136 Steam combination 250°F (K7) - See HX-0133 for option description HS-3006-0MDKHX-0138 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HS-3005-0MGVHX-0139 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HS-3505 modelsHX-0140 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HS-3506-1MGHHX-0141 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HS-3006-0MDKHX-0142 Steam combination 250°F - Increases outlet temperature to 250°F 4000-PSI modelsHX-0143 Trapping unloader - High pressure water is trapped in outlet hose when trigger gun is released HS-3005, HS-3006 &

HS-3506 modelsHX-0144 Dual gun (requires trapping unloader) - Two guns may be sprayed at the same time; flow is divided between the two guns

while each operator maintains equal system pressureHS-3006 & HS-3506 models

HX-0145 Adjustable temperature control - Operator is able to adjust outlet water temperature between 96°-198°F All modelsHX-0146 Hour meter - Displays number of hours unit has been in operation All modelsHX-0147 Four point lifting capability - Allows unit to be lifted by crane All modelsHX-0148 Detergent (requires trapping unloader) - Supplies soap injection through the high pressure pump while spraying; pressure

washers with pressure trapping unloader onlyAll models

HX-0200 Trapping unloader - High pressure water is trapped in outlet hose when trigger gun is released HS-3005 & HS-3505 modelsNote: To order options HX-0138 to HX-0141, HX-0144 or HX-0148 you must order option HX-0143 or HX-0200 (not required for 4000-PSI models, which already come equipped with trapping unloader.)

HS Series shown with optional hot water skid equipment cover (AW-6000-1006)


DIRECT DRIVE MODELS

MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPEBURNER FUEL TANK CAP.

BURNER FUEL CONS.


HSE-1002-0MG10 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A General NEMA 5-15P 4.0 gallon 1.33 gph 186,000 43in.x29.5in.x36.5in. 418 lb. 295 lb.HSE-1002-0MM11 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A Mi-T-M NEMA 5-15P 4.0 gallon 1.33 gph 186,000 43in.x29.5in.x36.5in. 410 lb. 237 lb.HSE-1502-0MG10 1500 2.0 2.0 HP, 120V, 1Ø, 19.0A General NEMA 5-20P 4.0 gallon 1.21 gph 169,000 43in.x29.5in.x36.5in. 422 lb. 299 lb.HSE-1502-0MM11 1500 2.0 2.0 HP, 120V, 1Ø, 19.0A Mi-T-M NEMA 5-20P 4.0 gallon 1.21 gph 169,000 43in.x29.5in.x36.5in. 414 lb. 291 lb.HSE-2003-0MG10 2000 2.8 4.0 HP, 230V, 1Ø, 18.0A General NEMA 6-20P 4.0 gallon 1.53 gph 214,000 43in.x29.5in.x36.5in. 439 lb. 316 lb.HSE-2003-0MM11 2000 2.8 4.0 HP, 230V, 1Ø, 18.0A Mi-T-M NEMA 6-20P 4.0 gallon 1.53 gph 214,000 43in.x29.5in.x36.5in. 431 lb. 308 lb.

BELT DRIVE MODELS

MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPEBURNER FUEL TANK CAP.

BURNER FUEL CONS.


HSE-2504-0M10 2500 3.2 6.0 HP, 230V, 1Ø, 25.0A General NEMA 6-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 699 lb. 569 lb.HSE-2504-0M30 2500 3.2 6.0 HP, 230-460V, 3Ø, 16.0A General NEMA L15-20P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 688 lb. 558 lb.HSE-3004-0M10 3000 3.5 8.0 HP, 230V, 1Ø, 36.0A General NEMA 6-50P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 737 lb. 607 lb.HSE-3004-0M30 3000 3.5 8.0 HP, 230-460V, 3Ø, 24.0A General NEMA L15-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 732 lb. 602 lb.HSE-3504-0M10 3500 3.3 10.0 HP, 230V, 1Ø, 39.0A General NEMA 6-50P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 761 lb. 631 lb.HSE-3504-0M30 3500 3.3 10.0 HP, 230-460V, 3Ø, 28.0A General NEMA L15-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 742 lb. 612 lb.

Pump - Direct or belt drive triplex General or Mi-T-M pump with ceramic plungers- Stainless-steel and brass unloader valve- Forged brass manifold- Thermal relief valve- High pressure detergent injection (Available as an option on 0MM11 models)Motor- Totally enclosed fan-cooled electric motor with manual thermal overload protection- 35-foot power cord with in-line GFCI which meets required CSA certification (GFCI not available on 3000 & 3500-PSI models)- Solid state electronic ignitionFrame - Reinforced powder coated steel tube frame with center balanced lifting hook- Powder coated steel hose reel mounting bracket (Belt drive models)- Electric cord hanger- Powder coated steel gun/wand holder- Solid steel threaded axles (2500 to 3500-PSI models)- Four pneumatic tires with locking tire brakeComponents - Energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance- High-quality fuel filter/water separator ensures clean fuel supply- Heavy-duty dual cogged belt drive system to prevent slippage (Belt drive models)- Complete system diagnostic board- Float tank (Not available on 0MM11 models)- Pressure and high limit safety controls- No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time)- Polyethylene burner fuel tank- Easy coil drain helps prevent freezing in cold weatherUnits Include:- Quick connect nozzles (0°, 15°, 25° and 40°) (1000 to 2000-PSI models)- 15° fixed and detergent nozzle (2500, 3000 & 3500-PSI models)- 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors (Screw connects on 2500 to 3500-PSI models)- Professional-grade insulated trigger gun with safety lock-off- Adjustable pressure insulated dual lance

The HSE Series works great in industrial applications requiring 20 or more hours per week and is built for longevity. The top-fired heat exchanger is energy efficient and designed for convenient troubleshooting.


Hot Water Electric Direct/Belt DriveHSE Series

Miscellaneous- Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F- Water output temperature is 190°-200°FWarranties

HSE-2003-0MG10

1YEARLIMITED


3YEARLIMITED

COILWARRANTY

7YEARLIMITED

PUMPWARRANTY


Redesigned Direct Drive Models


Hot Water Electric Direct/Belt DriveHSE Series

OPTIONS PART NUMBER DESCRIPTION FITS MODELS

50-0161 High pressure detergent injector - High pressure water mixes with detergent to clean even the heaviest build-up 1000 to 2000-PSI modelsHX-0070 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart 2500 to 3500-PSI modelsHX-0071 Auto start/stop - steam - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when trigger

gun is pulled unit will restart; Steam option - reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240°F above ambient with a maximum of 300°F

2500-PSI models

HX-0072 Auto start/stop - steam - See HX-0071 for option description 3000-PSI modelsHX-0073 Auto start/stop - steam - See HX-0071 for option description 3500-PSI modelsHX-0074 Auto start/stop - CAD cell - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when

trigger gun is pulled unit will restart; CAD cell - monitors burner for proper ignition2500 to 3500-PSI models

HX-0075 Auto start/stop - steam - CAD cell - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart; Steam option - reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240°F above ambient with a maximum of 300°F; CAD cell - monitors burner for proper ignition

2500-PSI models

HX-0076 Auto start/stop - steam - CAD cell - See HX-0075 for option description 3000-PSI modelsHX-0077 Auto start/stop - steam - CAD cell - See HX-0075 for option description 3500-PSI modelsHX-0085 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-2504-0M30HX-0086 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-3004-0M30HX-0087 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-3504-0M30HX-0088 Skid feet - Stationary applications 2500 to 3500-PSI modelsHX-0161 Hour meter - Displays number of hours unit has been in operation 2500 to 3500-PSI modelsHX-0232 Steam - Reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240°F

above ambient with a maximum of 300°FHSE-1002-0MG10 & HSE-1502-0MG10

HX-0233 Adjustable thermostat - Operator is able to adjust outlet water temperature 1000 to 2000-PSI modelsHX-0235 Hour meter - Displays number of hours unit has been in operation 1000 to 2000-PSI modelsHX-0237 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart 1000 to 2000-PSI modelsHX-0238 Time delay shutdown - Timer will shut unit off automatically when trigger gun is released and timer reaches setting 1000 to 2000-PSI modelsHX-0239 Steam - See HX-0232 for option description HSE-1002-0MM11 &

HSE-1502-0MM11HX-0240 Steam - See HX-0232 for option description HSE-2003-0MG10HX-0241 Steam - See HX-0232 for option description HSE-2003-0MM11









HSE-3004-0M10

MODEL NUMBER PSI GPM HORSEPOWER/MOTORBTU PER HOUR - NATURAL GAS

BTU PER HOUR - LP GAS DIMENSIONS (LxWxH) SHIP WT. NET WT.

HG-3004-1208 3000 3.9 8.0 HP, 208V, 1Ø, 40.5A 338,000 326,000 56.5in.x29in.x49.75in. 878 lb. 758 lb.HG-3004-3208 3000 3.9 8.0 HP, 208V, 3Ø, 23.0A 338,000 326,000 56.5in.x29in.x49.75in. 878 lb. 758 lb.HG-3004-1230 3000 3.9 8.0 HP, 230V, 1Ø, 37.0A 338,000 326,000 56.5in.x29in.x49.75in. 878 lb. 758 lb.HG-3004-3230 3000 3.9 8.0 HP, 230V, 3Ø, 20.0A 338,000 326,000 56.5in.x29in.x49.75in. 878 lb. 758 lb.HG-3004-3460 3000 3.9 8.0 HP, 460V, 3Ø, 10.0A 338,000 326,000 56.5in.x29in.x49.75in. 878 lb. 758 lb.


HX-0104 K7 unloader (flow activated) (auto start/stop N/A) - Converts pressure trapping unloader system to flow actuated K7 unloader All modelsHX-0105 Liquid propane (vapor only) - Converts natural gas pressure washer to operate on liquid propane (vapor only) All modelsHX-0106 Hour meter - Displays number of hours unit has been in operation All modelsHX-0107 Time delay shutdown - Timer will shut unit off automatically when trigger gun is released and timer reaches setting All modelsHX-0108 (1) remote station (auto start/stop N/A) - Adds control box which may be mounted away from unit to control on/off, burner and

soap injectionAll models

HX-0109 Time delay shutdown and first remote box (kit option) - Timer will shut unit off automatically when trigger gun is released and timer reaches setting; adds control box which may be mounted away from unit to control on/off, burner and soap injection

All models

HX-0110 Additional remotes (up to 3) - Additional remotes that may be added to unit after the first remote is installed All modelsHX-0111 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart All modelsHX-0121 250°F steam upgrade - Steam valve increases outlet temperature to 250°F while lowering system pressure All modelsHX-0124 Auto start/stop and first remote option - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit

will restart; adds control box which may be mounted away from unit to control on/off, burner and soap injectionAll models

Note: You cannot order HX-0107 and HX-0108 together, you will need to order HX-0109 instead. HX-0107 and HX-0108 can be ordered separately.

Pump - Belt drive triplex piston General pump with ceramic plungers- Factory preset trapping unloader- Thermal relief valve- Adjustable high pressure detergent injectionMotor- Open drip-proof motor with manual thermal overload protectionFrame - Powder coated steel side panels and frameComponents - Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack- Pressure switch and over-pressure safety controls- 24-volt control system- Polyethylene float tank (4-gallon with in-line screen filter)- 1⁄2-inch schedule 80-coil heat exchanger- Adjustable thermostat- Electronic ignition with an intermittent pilotUnits Include: - 21-inch draft diverter, 10-inch opening- Quick connect nozzles (0°, 15°, 25° and 40°)- 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors- Professional-grade insulated trigger gun with safety lock-off- Adjustable pressure insulated dual lance with fixed detergent nozzleMiscellaneous- Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option)Warranties

The stationary HG Series pressure washers are a perfect choice for wash bays that require a steady fuel source. Available in either natural gas or LP, this unit features an electronic ignition with an intermittent pilot.


Hot Water Natural Gas/LP Belt DriveHG Series

HG-3004-3460

Certified for 0 to 2000-feet

above sea level

Professional InstallationRequired1YEAR

LIMITED


3YEARLIMITED

COILWARRANTY

7YEARLIMITED

PUMPWARRANTY


P R E S S U R E W A S H E R A C C E S S O R I E S

Surface Cleaners, Nozzles & Brush

Rotating NozzlesRotating nozzles increase your cleaning power and decrease your cleaning time. They offer 0° spray impact with 25° coverage. Nozzles include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.AW-7004-Series*- 6000-PSI rated- 212°F temperature ratingAW-7300-Series* - 3600-PSI rated- 190°F temperature ratingAW-7500-Series* - 6000-PSI rated- 212°F temperature rating*Consult factory for correct orifice size

0° 25° Rotating Nozzle

Rotary Surface CleanersClean large surfaces faster and easier than with a standard cleaning nozzle. The Mi-T-M rotary surface cleaners are equipped with strong-bristled brushes for long life and easy glide control. This cleaning accessory can be used on decks, patios, sidewalks, driveways, pool decks, parking lots and any other horizontal surface.

AW-7020-8001 - 28-inch diameter- 4000-PSI rated- Lightweight, portable frame with walk- behind design- Large wheels for mobility- Professional-grade aluminum housing- Heat-treated sealed pressure swivel - requires no maintenance- 212°F maximum temperature- 3.0 to 10.0-GPM water volumeAW-7020-8003 - 20-inch diameter- 4000-PSI rated- Heavy-duty anodized aluminum handle- Professional-grade high pressure trigger gun- Heat-treated sealed pressure swivel - requires no maintenance- 180°F maximum temperature- 3.0 to 5.0-GPM water volume


Shut-Off Ball ValveThis shut-off ball valve will allow the user to switch back and forth from a rotary surface cleaner to a gun and wand while cleaning.50-0210 - 4000-PSI maximum operating pressure- 3⁄8" male quick connect steel plug inlet- 3⁄8" male quick connect brass coupler outlet

New for2013

Rotating BrushThe rotating brush offers low pressure rotation for hard to remove debris on sensitive surfaces. Can be used on painted surfaces, fiberglass, wood or brick.AW-7003-1500- Natural hair bristles- Quick connect- Adjustable angle- 3.0 to 6.0-GPM flow rate- 176°F temperature rating- Can be used with low pressure detergent injector


Detergents, Oil & Roll CagesDetergentsAll Purpose Cleaner The most versatile and efficient all-around cleaner. Use all purpose cleaner on vehicles, glass, stainless-steel, aluminum, painted surfaces and lawn equipment.AW-4018-0026 (1-gallon, 4 per case)AW-4018-0005 (5-gallon)AW-4018-0055 (55-gallon)- Environmentally friendly, will not harm plants, biodegradable- Indoor and outdoor use- Hard water stable prevents spottingDeck & House Wash Deck & House wash removes mildew and dirt. It is recommended for decks, homes and wooden surfaces.AW-4034-0026 (1-gallon, 4 per case)AW-4034-0005 (5-gallon)AW-4034-0055 (55-gallon)- Environmentally friendly, will not harm plants, biodegradable- Hard water stable prevents spotting

Pump Oil Mi-T-M’s pump oil offers trouble-free performance with no lubricant related failures. Our pump oil is specially designed for pressure washer pumps. It will keep pumps cooler than regular oil and is suitable for all climates.AW-4085-0016 (1-pint, 6 or 12 per case)- Convenient pour spout and resealable cap- Contains rust and corrosion additives, anti-wear additives, foam suppressant and dispersant for system cleanliness

Pump Saver Pump saver provides longer pump life, prevents harmful build-up of hard water mineral deposits, preserves seals and pistons and protects against freezing for safe, cold weather storage.AW-4070-0004 (16-oz.)- For use with all pressure washers- Protects pressure washer when not in use

Roll CageDesigned to protect cold water pressure washers.CX-0054 (Fits CW Premium Series with Honda and Subaru engines)CX-0055 (Fits CW-4004-3MV0)CX-0056 (Fits CW-3004-0MKD)- Lifting hook- 11⁄4-inch powder coated steel tubing- Retro-fits to existing frame

Heavy-Duty DegreaserHeavy-duty degreaser is great for the removal of oil and grease. It is capable of handling all your equipment and automotive cleaning needs.AW-4059-0026 (1-gallon, 4 per case)AW-4059-0005 (5-gallon)AW-4059-0055 (55-gallon)- Contains rust inhibitors to reduce corrosion- Hard water stable prevents spotting



Injectors & HosesLow Pressure Detergent InjectorThe low pressure detergent injector allows you to apply recommended detergents. Can be used on cars, boats, vans and engines.AW-8400-0021 (2000 to 6000-PSI)AW-8000-0001 (5000-PSI)- Adjustable chemical draw- Clear, pliable detergent hose- Solid brass body with stainless- steel orifice for durability- Quick connects for easy installation

High Pressure Detergent InjectorWith the high pressure detergent injector, large tasks become small. High pressure washer mixes with detergent to clean even the heaviest build-up. Can be used on farm equipment, tractor trailers, RVs and bridges.50-0161 - Brass and stainless-steel construction- 2.0-GPM minimum operating capacity- 6.0-GPM maximum operating capacity- Steel mesh in-line water strainer

Digital Hour Meter/Tachometer32-0416- Simple hour meter with tachometer- Updates every 3 seconds- RPM to 9,900

Extension HosesWhen you need extra mobility and length.Cold Water851-0338 (4000-PSI, R1)851-0006 (4500-PSI, R2)851-0317 (5000-PSI, R2)- 50-foot x 3⁄8-inch ID- Non-marking- Includes quick connects, swivel and bend restrictors- Chemical resistant- Wire-braided851-0362 (6000-PSI, R2)- 50-foot x 1⁄2-inch ID15-0006 (Industrial water supply)- 50-foot x 3⁄4-inch

Hot WaterSteam Hose15-0077 (Steam combination, 3000-PSI, R1)Hoses Assembled with Screw Connects850-0174 (2500-PSI & HSP Models, R1)850-0199 (4000-PSI & HSP Models, R2)- 50-foot x 3⁄8-inch ID- Includes screw connects, swivel and bend restrictorsBare Hoses15-0146 (3000-PSI, 50-foot x 3⁄8-inch, R1)15-0160 (4500-PSI, 75-foot x 3⁄8-inch, R2)15-0161 (4500-PSI, 100-foot x 3⁄8-inch, R2)15-0162 (4500-PSI, 150-foot x 3⁄8-inch, R2)15-0163 (4500-PSI, 200-foot x 3⁄8-inch, R2)- 3⁄8-inch male swivel- For use with hose reels

Long Range Chemical Nozzle18-0373 - Quick connects to the end of the wand- Low pressure- Has a range of 30-feet while drawing chemical

Sand InjectorWet sandblasting is efficient and dust-free. Remove coatings from steel and concrete surfaces. Can be used on rust, paint, stains and graffiti.AW-3000-0000 (Sand injector - carbide tip)- Includes sand probe and clear hose- Consult factory before ordering18-0113 (Carbide replacement nozzle)

50-ft. 75-ft. 100-ft. 150-ft. 200-ft.

15-0006, 15-0077, 15-0146, 850-0174, 850-0199,851-0006, 851-0317, 851-0338, 851-0362

15-0160

15-0161

15-0162

15-0163


Jumper Hoses852-0138 Screw connect, 57-inch (HSP Series & HSE Belt Drive Models)

852-0139 Quick connect, 57-inch (Cold water)

852-0161 Screw connect, 85-inch (HSE Direct Drive Models)

850-0278 Quick connect, 85-inch (HS Series)G

EF


Hose ReelsHose ReelsHose reels are convenient for the storage of hoses. Reel capacities based on R1 Mi-T-M hoses.50-0195 (13-inch reel, 150-foot maximum hose length)50-0196 (16-inch reel, 200-foot maximum hose length)50-0164 (13-inch reel without swivel, 100-foot maximum hose length)50-0165 (16-inch reel without swivel, 200-foot maximum hose length)- Frame mount- 360° pivoting action on 50-0195 & 50-0196 hose reels- Non-pivoting action on 50-0164 & 50-0165 hose reels- Easy mount bracket design- Clean hands hose guide- Live systemNote: Hose reels 50-0164 & 50-0165 must be mounted with 13-0208A01 (45° bracket). Also, 23-0307 (elbow) and 23-0243 (reducer) are required for jumper hose mounting.

AW-0050-0138 Bracket - Universal mount (HSP-2500 Models, HS Series and HSE Direct Drive Models)

13-0207A01Bracket - Wall mount(HG Series)

13-0175A01Bracket - Cold water base mount (JCW & CW Series)

23-0243 Reducer

23-0307 Elbow

13-0208A01Bracket - 45° for mounting reels without swivel

F D

C

E

B

B

D

B

C

G

G

13-0210A01Bracket - 90° for mounting reels without swivel

50-0140 Bracket - Bar 29-inch (CWC Series)

Due to advancements in technology, the design of Mi-T-M hose reels may change after the publication of this catalog.



Extension Wands & Gutter CleanerExtended Reach WandsClean hard to reach places by using extended reach wands. Can be used on siding, house eaves, farm equipment, semi-tractor trailers and multi-story buildings.Fiberglass WandAW-7018-1200 (12-foot)AW-7018-1800 (18-foot)AW-7018-2400 (24-foot)- Professional-grade trigger gun with safety lock-off- Complete with quick connects- Extends from 6-feet, 8-inches to 12, 18 or 24-feet- Lightweight and easy to control- Compatible with all makes of pressure washers rated up to 4000-PSI- Easy hose retraction- Can handle water up to 200°F


Gutter CleanerThe gutter cleaner turns your wand into an efficient rain gutter cleaner. Clean your gutters from the ground and blow out dirt, grime, leaves and anything else that may be stuck inside the gutters.50-0201- 4000-PSI maximum pressure- 1⁄4-inch quick connect socket outlet- 1⁄4-inch quick connect plug inlet

Aluminum Wand ExtensionsThese lightweight, aluminum extension wands allow the user to clean hard to reach areas with ease.AW-7105-3600 (36-inch)AW-7105-4800 (48-inch)AW-7105-7200 (72-inch)AW-7105-9600 (96-inch)- Aluminum- 1⁄4" lance saver socket and quick connect plug

Aluminum WandAW-7017-1800 (18-foot)AW-7017-2400 (24-foot)- Professional-grade trigger gun with safety lock-off- Complete with quick connects- Extends from 6-feet, 5-inches to 18 or 24-feet- Lever locks- Compatible with all makes of pressure washers rated up to 4000-PSI- Includes belt for additional support

Telescoping Wand BeltTelescoping wand belt holds telescoping wands which reduces fatigue and strain. It provides better operator control, optimizing cleaning performance.AW-7015-0001- Works with AW-7017 and AW-7018 extended reach wands- Includes three plastic snap-on clips that snap to your shoulder, waist and wand

New for2013

New for2013


Parts Kit & Packaged Accessories

Gun & WandReplacement gun and wand for continued cleaning capability.AW-0016-0001 (Trigger gun, rated up to 5000-PSI)AW-0851-0096 (36-inch wand assembly, includes quick connect socket)

AW-0016-0001


Pivot CouplerThe quick connect pivot coupler adjusts to three different cleaning angles to get those hard-to-reach areas.50-0208 (1⁄4-inch quick connect)- For most pressure washers up to 4500-PSI- Connects between the wand and high pressure nozzle

Pressure Washer Replacement Parts KitEverything you need to keep your pressure washer up and running.See chart for part numbers needed to order the kit.- Secure case locking system to keep lid latched and parts secure- Diagram card includes Mi-T-M part numbers for quick reorder reference- Lid hinges to reveal kit components and location- Storage compartments with adjustable plastic separators, keeps all parts organized for easy access- Durable case is made of heavy plastic to withstand abuse

Includes a parts chart that fits into the plastic lid with a numbered diagram for identification. Also includes an application chart for easy part recognition and unit capability.

PART NUMBER DESCRIPTION

AW-1162-0174 Replacement parts box

AW-1162-0174 INCLUDES THE FOLLOWING PARTS:PART NUMBER DESCRIPTION QUANTITY17-0001 1⁄4 -inch F x 1⁄4-inch socket 217-0002 1⁄4 -inch M x 1⁄4-inch plug 217-0004 3⁄8 -inch F x 3⁄8-inch socket 217-0074 3⁄8 -inch M x 3⁄8-inch plug 217-0075 3⁄8 -inch F x 3⁄8-inch plug 217-0007 3⁄8 -inch M x 3⁄8-inch socket 217-0028 1⁄4 -inch M x 1⁄4-inch socket 218-0397 4.0 orifice, 0° (red) 218-0399 4.0 orifice, 15° (yellow) 218-0400 4.0 orifice, 25° (green) 218-0401 4.0 orifice, 40° (white) 218-0392 3.5 orifice, 0° (red) 218-0393 3.5 orifice, 15° (yellow) 218-0395 3.5 orifice, 25° (green) 218-0396 3.5 orifice, 40° (white) 218-0387 3.0 orifice, 0° (red) 218-0388 3.0 orifice, 15° (yellow) 218-0390 3.0 orifice, 25° (green) 218-0391 3.0 orifice, 40° (white) 218-0386 65° chemical injector 219-0206 1⁄2-inch M x 3⁄4-inch F inlet valve 122-0005 1⁄2-inch M thermal relief valve 225-0122 O-ring seal (tips) 1025-0123 O-ring seal ( 3⁄8 -inch quick connects) 10

High Pressure Swivel ConnectorPrevents hose from tangling or twisting.AW-0023-0507- 5070-PSI maximum pressure- 42.0 GPM flow rate- 3⁄8-inch FNPT x 3⁄8-inch FNPT- Nickel-plated with stainless-steel internal

Packaged AccessoriesIncrease sales and brand recognition with the Mi-T-M packaged accessory program. Mi-T-M has a full line of accessories in full color packaging that are designed for use with the Replacement Parts Rack and the Replacement Parts Cabinet. Each part is clearly identified with its name, part number and which unit it is used on.

New for2013

New for2013

AW-0851-0096


Packaged Accessories & RacksFittingsAdd the ability to easily connect and disconnect your pressure washer wands and hoses.AW-0017-0001 (1⁄4F x 1⁄4 socket)AW-0017-0002 (1⁄4M x 1⁄4 plug)AW-0017-0004 (3⁄8F x 3⁄8 socket)AW-0017-0005 (3⁄8M x 3⁄8 plug)AW-0017-0006 (3⁄8F x 3⁄8 plug)AW-0017-0028 (1⁄4M x 1⁄4 socket)AW-0017-0029 (1⁄2M x 3⁄8 socket)- Quick connectAW-0017-0035 (M22 x 3⁄8 FNPT)- Screw connect- 2-pieceAW-0023-0017 (3⁄8M x 1⁄4F adapter)AW-0023-0410 (3⁄8M x 1⁄4BSP-F adapter)AW-0024-0251 (3⁄8M x 1⁄4BSP-M adapter)

NozzlesQuick connect nozzles give the user a choice of spray angles for precise cleaning power.Individual Nozzles- Available in 0°, 15°, 25°, and 40°- Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0- Quick connect- Consult factory for nozzle size needed3-Pack Nozzles- Sold in packs of three: 0°, 15°, 25°, and 40°- Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0- Quick connect- Consult factory for nozzle size needed4-Pack Nozzles- Sold in packs of four: 0°, 15°, 25° and 40°- Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0- Quick connect- Consult factory for nozzle size neededAW-0018-0386 (65° detergent nozzle)- Sold individually

O-ringsO-rings ensure a tight fit and prevent leaks with quick connect sockets.AW-0025-0122 (3⁄8-inch x 9⁄16-inch)AW-0025-0123 (1⁄2-inch x 11⁄16-inch)- 10 per pack

Pressure Washer Replacement Parts CabinetMaximize your Mi-T-M pressure washer accessory sales with this industrial quality point-of-sale cabinet.AW-9300-0015 (Display cabinet)20-0886A18 (Wand display holder)- Durable powder coated steel frame- Custom locks keep merchandise safe and secure- Handy reorder cards assist with inventory management- Versatile peg and grid system keeps parts coordinated for easy access- Attached extension wand dividers keep inventory organized (not shown)- Convenient floor tray holds your Mi-T-M replacement hoses- Large enough to handle multiple quantities of inventory- Conveniently sized to occupy a modest amount of floor spaceRack Dimensions: 29.75-in. W x 24.5-in. D x 65.25-in. H

Parts sold separately

AW-0017-0002

AW-0017-0035

AW-0025-0122

4-Pack Nozzle (0°, 15°, 25° and 40°)

Back view of accessory packaging




Display RacksEquipment Display RackThis equipment display rack is a perfect way to present Mi-T-M industrial equipment to your customers. Compact yet strong enough to hold direct drive pressure washers, 5-gallon air compressors and propane forced air portable heaters. The upright design offers great visibility to showcase each of the products it holds without using a lot of valuable floor space.AW-9300-0018 (3-tier powder coated display rack)41-0466 (Product display signs)64-6043 (Acrylic literature holder)64-6044 (Industrial equipment pocket guides; 25-pack)AW-9300-0027 (Rack kit, includes 41-0466, 64-6043 & 64-6044)- Three-tier equipment display rack- Durable powder coated steel frame- Mesh powder coated steel shelves to hold equipment- Includes literature holder for Mi-T-M pocket guides and display signs Rack Dimensions:Rack Assembly 26.81-in. W x 43-in. D x 69.75-in. HShelf Dimensions:Top Shelf 24-in. W x 20.875-in. DMiddle Shelf 24-in. W x 31.25-in. DBottom Shelf 24-in. W x 42.625-in. D

Product Display RackCompact display rack solves your limited retail floor space issues.AW-9300-0013 (Display rack; includes header card, magnets and literature holder)AW-0013-0154 (Display shelves; 2 maximum)13-0176A18 (Generator stop bracket; 4 maximum)- Easy-to-assemble- Requires only 15-square-feet of floor space- Constructed of powder coated metal square tubingRack Dimensions: 61-in. W x 36-in. D x 62-in. H

Equipment Display RisersThese display risers are the perfect way to elevate Mi-T-M industrial equipment. Compact and sturdy to hold air compressors, generators, pressure washers, portable heaters and wet/dry vacuums. Stackable for multi-level displays of your Mi-T-M equipment.AW-9300-0019 (Powder coated display riser)- Durable wrinkle-finish powder coated steel frame and top- Occupies a modest amount of valuable floor space- Stackable design for grouped displays at various heights- Raises equipment off of floor- Heavy-duty base constructionRack Dimensions: 26-in. W x 26-in. D x 12-in. H

Units sold separately



Detergent and unit sold separately

Equipment Rental RackCompact display rack solves your limited retail floor space issues.AW-9300-0029 (Display rack)41-0485 (Pressure washer rental sign)64-6044 (Industrial equipment pocket guides; 25-pack)64-6057 (Vinyl literature holder)64-6059 (Eraser)64-6060 (Dry erase marker)AW-9300-0034 (Rack kit, includes 41-0485, 64-6044, 64-6057, 64-6059 and 64-6060)- Easy-to-assemble- Requires only 71⁄2-square-feet of floor space- Constructed of powder coated metal square tubing- Can hold up to 18 – 1-gallon detergent bottles- Erasable area for half and full-day rental prices or purchase price- Includes literature holder for Mi-T-M pocket guidesRack Dimensions: 27-in. W x 42-in. D x 40-in. H

As a company that continually strives to seek advancements in technology, the design of Mi-T-M trailers may change after the publication of this catalog.

MWT-0510-2MHD (Dual-axle trailer with 510-gallon water tank and 2-inch centrifugal pump)Tank- 510-gallon elliptical low profile 3⁄8-inch thick polyethylene- 16-inch manhole with 4-inch vent and a sump drain- Lid is tetheredPump- 2-inch centrifugal pump featuring 118cc Honda OHV engine with low oil shutdown- Precision molded aluminumControl Manifold- Easy to operate butterfly brass valvesPlumbing- Dual rear spray heads- Garden hose connector- Rear drain- Manifold discharge system- Water hammer prevention valveBed- 5-foot x 8-foot frame

The Mi-T-M dual-axle 510-gallon water trailer is perfect for controlling dust on jobsites and parking lots, heavy equipment cleaning, street cleaning, firefighting, and a host of other applications. This tough trailer offers rear spray, fire and garden hose hook-ups and hydrant fill capabilities. Pair it with a 2-inch centrifugal pump featuring 118cc Honda OHV engine and it is ready to tackle any job requiring portable water.

11⁄2-inch fire hose hook-up with 50-foot x 11⁄2-inch hose and fog nozzle

Break-away hydrant fill with 25-foot x 21⁄2-inch hose

Trailer- DOT approved- Trailer dimensions: 13'7" x 82" x 70"- 12-inch underclearance at axle and no plumbing beneath the trailer deck- (2) 3,500-lb. tandem axles with hydraulic surge brakes- (4) ST225-75 15-inch tires with white spoke rims- (2) fenders- 2-inch coupler- 7,000-lb. side-mount crank jack- Dual leaf spring suspension- Rubber mounted sealed lights- Wire storage basket- Two safety chains with snap hooks- 7,000-lb. gross vehicle weight- Trailer weight: 1,580-lbs. empty/5,900-lbs. loadedWarranties

3YEARLIMITED

WATER TANKWARRANTY

3YEARLIMITED


1YEARLIMITED

TRAILERWARRANTY

2YEARLIMITED

PUMPWARRANTY


Hard Suction OptionThe hard suction option allows you to draw water from an auxiliary source (pond, water pit, etc.). The fire hose is designed to be used with pressurized water and lays flat for easy storage.TX-0008

W A T E R T R A N S P O R T T R A I L E R

Dual-Axle Water Trailer


Single-Axle Trailers

AW-9000-0005 (With surge brakes and 200-gallon water tank)AW-9000-0006 (With electric brakes and 200-gallon water tank)AW-9000-0007 (With 200-gallon water tank only, no brakes)- 5-foot x 81⁄2-foot trailer- 3-inch x 41⁄4-inch angle frame- 3,500-lb. gross vehicle weight- (1) 3,500-lb. axle- (2) ST205-75R 15-inch radial tires with white spoke rims- (2) fenders- 2-inch coupler- Swivel jack with pad- Rubber mounted sealed lights- Tank is enclosed in a powder coated steel frame- Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers)- Aluminum treadplate steps for access to water tanksAccessories for Single-Axle Trailers- Pressure washers- Hose reels

Mi-T-M offers several options for trailer mounted pressure washers for the ultimate portable cleaning. Trailer units are fully integrated and self-contained systems that are designed with a large water supply tank for working at remote sites where water is not accessible. The heavy-duty construction of the trailer and the axle suspension provides an easy ride ensuring the longevity of your equipment. Add a high quality Mi-T-M pressure washer and you are ready to deliver the power to get large jobs done quickly, wherever you need to work.

AW-9000-0005 shown with HS-3505-1MGH hot water pressure washer and hose reels (available as accessories)

Trailer Options for Single & Dual-Axle TrailersHigh Pressure Hose Reel OptionsThese high pressure hose reel options include the hose reel with jumper hose and mounting bracket.TX-0001 (13-inch reel)TX-0002 (16-inch reel)

Low Pressure Hose Reel OptionsThese low pressure hose reel options include the hose reel with mounting bracket and plumbing.TX-0003 (16-inch reel)Note: 22-0136 back-flow preventor must be used with TX-0003, when used in California.

Replacement Hose Reel PartsWhen adding hose reels to the single or dual-axle trailers, use the following jumper hose and mounting bracket.15-0159 (Jumper hose)13-0179A01 (Mounting bracket)50-0195 (13-inch reel, 150-foot maximum hose length)50-0196 (16-inch reel, 200-foot maximum hose length)


Back-Flow PreventorsThese back-flow preventors are required on trailer units in some states.22-0136 (Use if a trailer has a hose reel for the supply)- Mounted on inlet side of trailer- To be used with TX-0003 low pressure hose reel optionTX-0005 (Trailer tank bypass - for use on HS Series models)- To be used on dual-axle trailers only- Removes the float system, while adding the necessary plumbing- Water bypasses back to water tankTX-0007 (Trailer tank bypass - for use on HS Series models)- To be used on single-axle trailers only- Removes the float system, while adding the necessary plumbing- Water bypasses back to water tank



Dual-Axle TrailersAW-9000-0003 (With surge brakes and [2] 200-gallon water tanks)AW-9000-0004 (With electric brakes and [2] 200-gallon water tanks)- 5-foot x 81⁄2-foot trailer- 3-inch x 41⁄4-inch angle frame- 7,000-lb. gross vehicle weight- (2) 3,500-lb. axles with brakes on both sides- (4) ST205-75R 15-inch radial tires with 6-bolt white spoke rims- (2) Tandem fenders- 2-inch coupler- Swivel jack with pad- Rubber mounted sealed lights- Tanks are enclosed in a powder coated steel frame- 5-foot x 4-foot x 12-inch storage area located under the water tanks (access doors are located at back of trailer)- Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers)- Aluminum treadplate steps for access to water tanks- (2) 200-gallon tanks are plumbed togetherAccessories for Dual-Axle Trailers- Pressure washers- Hose reels

Trailer is shown with HS-3505-1MGH hot water pressure washer and hose reels (available as accessories)


Storage area located under the water tanks

AW-9000-0008 (With surge brakes and [1] 200-gallon water tank)- 5-foot x 81⁄2-foot trailer- 3-inch x 41⁄4-inch angle frame- 7,000-lb. gross vehicle weight- (2) 3,500-lb. axles with brakes on both sides- (4) ST205-75R 15-inch radial tires with 6-bolt white spoke rims- (2) Tandem fenders- 2-inch coupler- Swivel jack with pad- Rubber mounted sealed lights- Tank is enclosed in a powder coated steel frame- Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers)- Aluminum treadplate steps for access to water tankAccessories for Dual-Axle Trailers- Pressure washers- Hose reels

AW-9000-0008 shown with HS-3006-0MDK hot water pressure washer and hose reel (available as accessories)


AC1-HM04-05M

MODEL NUMBER CFM @ PSI DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) SHIP WT. NET WT.

AC1-HH04-05M 4.4 @ 100 118cc Honda OHV 21.5in.x17.5in.x21.75in. 87 lb. 79 lb.AC1-HM04-05M 4.4 @ 100 136cc Mi-T-M OHV 21.5in.x17.25in.x22.125in. 87 lb. 79 lb.AC1-HR45-05M 4.4 @ 100 126cc Subaru OHC 21.5in.x17.5in.x21.75in. 90 lb. 82 lb.

ACCESSORIES PART NUMBER DESCRIPTION FITS MODELS

70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AC1-HH04-05M70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AC1-HR45-05M

Compressor Pump - Quality single stage compressor - Oil lubricated aluminum crankcase- Aluminum head for heat dissipation- Cast iron cylinder- Stainless-steel braided discharge hose- Canister inlet air filterEngine- Industrial Honda OHV or Mi-T-M OHV engine with pneumatic idle control to conserve fuel (Low oil shutdown on AC1-HM04-05M)- Subaru OHC engine with cable throttle control to conserve fuelFrame - Compact and portable twin tank design- Powder coated steel frame and roll cage design- Double-handled carrying capability- 5-gallon powder coated tank assembly- Protective pump/motor housing- Rubber isolators

Components - Regulator and two gauges for tank and outlet pressure- Drain valves and pressure relief valves- Pneumatic throttle control- Start/stop control set at 95 to 125-PSIWarranties

Do it yourself jobs can seem daunting at first. For those who don't know where to begin, Mi-T-M'shand carry single stage 5-gallon air compressors can make your jobs easier and more efficient bysupplying you the extra power you need. Our gasoline models are perfect for remote jobsites.

5-Gallon

AC1-HR45-05M

A I R C O M P R E S S O R S

Single Stage Gasoline

5YEARLIMITED


3YEARLIMITED


1YEARLIMITED

COMPRESSORPUMP WARRANTY

1YEARLIMITED

Mi-T-M ENGINEWARRANTY


New 136cc Model

Designed for jobs that require more power than standard tools can deliver, this Mi-T-M portable air com-pressor is ideal for light to moderate use. This gas driven model comes equipped with a 12-inch fly wheel

for extra cooling and longer life and features convenient lifting handles for ease of use.8-Gallon




AM1-PR07-08M


AM1-PH65-08M 13.1 @ 100 196cc Honda OHV 44.5in.x18.5in.x27in. 200 lb. 175 lb.AM1-PK07-08M 13.1 @ 100 208cc Kohler OHV 44.5in.x18.5in.x27in. 200 lb. 175 lb.AM1-PR07-08M 13.1 @ 100 211cc Subaru OHC 44.5in.x18.5in.x27in. 200 lb. 175 lb.


70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier Honda & Kohler models70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AM1-PR07-08MAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed polyester,

water resistant, drawstrings to secure coverAll models

AX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0067 Electric start (battery and cables not included) - For easy starting AM1-PR07-08MConsult Factory Cable throttle control - Automatically throttles down engine to conserve fuel AM1-PH65-08M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Stainless-steel braided discharge hose- Large canister intake filterEngine - Industrial Honda OHV or Kohler OHV engine with pneumatic idle control to conserve fuel- Subaru OHC engine with cable throttle control to conserve fuel Frame - Powder coated 8-gallon twin tank receivers- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard- Convenient lifting handles- Pneumatic tire and steel hub- Heavy-duty axle

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls engine straight to ensure constant belt alignment- 12-inch fly wheel for extra cooling and longer life- Quality pilot valve unloaderWarranties

5YEARLIMITED


3YEARLIMITED


2YEARLIMITED

PUMP EXCHANGEWARRANTY

See page 56 formore informat ion

3YEARLIMITED


This gas driven, portable, single stage 20-gallon air compressor features a rugged handleand large tires that allows for greater portability and high quality performance. 20-Gallon

AM1-PH65-20M


AM1-PH65-20M 13.1 @ 100 196cc Honda OHV 37in.x23.5in.x33in. 272 lb. 212 lb.AM1-PR07-20M 13.1 @ 100 211cc Subaru OHC 37in.x23.5in.x33in. 272 lb. 212 lb.


7-0228A01 Rear lifting handle (N/A for models with electric start option) - Allows unit to be lifted from both ends All models70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AM1-PH65-20M70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AM1-PR07-20MAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed polyester,


AX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0027 Stationary kit - Kit allows unit to be modified to a stationary unit All modelsAX-0067 Electric start (battery and cables not included) - For easy starting AM1-PR07-20MConsult Factory Cable throttle control - Automatically throttles down engine to conserve fuel AM1-PH65-20M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Stainless-steel braided discharge hose- Large canister intake filterEngine - Industrial Honda OHV engine with pneumatic idle control to conserve fuel- Subaru OHC engine with cable throttle control to conserve fuelFrame - Powder coated ASME coded 20-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard- Convenient lifting handle- Two pneumatic tires and steel hubs- Heavy-duty axle

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls engine straight to ensure constant belt alignment- 12-inch fly wheel for extra cooling and longer life- Quality pilot valve unloaderWarranties



5YEARLIMITED


3YEARLIMITED


2YEARLIMITED




Ideal for both contractors and remodelers this two stage air compressor provides a reliable air source on remote jobsites. This model allows for more air to be stored for future use while generating less

heat, reducing wear and extending its life for many years of dependable use.8-Gallon


Two Stage Gasoline


MODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) SHIP WT. NET WT.

AM2-PH09-08M 17.2 @ 175 270cc Honda OHV 44in.x26in.x31in. 330 lb. 260 lb.AM2-PK95-08M 17.2 @ 175 277cc Kohler OHV 44in.x26in.x31in. 330 lb. 260 lb.AM2-PR09-08M 17.2 @ 175 265cc Subaru OHC 44in.x26in.x31in. 330 lb. 260 lb.

*Equipped with 150-PSI maximum rated regulator.


AW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed polyester, water resistant, drawstrings to secure cover

All models

AX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0015 Electric start (battery and cables not included) - For easy starting AM2-PH09-08MAX-0041 Electric start (battery and cables not included) - For easy starting AM2-PR09-08MConsult Factory Cable throttle control - Automatically throttles down engine to conserve fuel Honda & Subaru models

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure- Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head and cylinder for extended durability- Stainless-steel braided discharge hose- Large canister intake filterEngine - Industrial Honda OHV, Kohler OHV or Subaru OHC engine- Pneumatic idle control to conserve fuel- Engine oil drainFrame - Powder coated 8-gallon twin tank receivers- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient lifting handles - Two pneumatic tires and steel hubs- Heavy-duty axle

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls engine straight to ensure constant belt alignment- 16.5-inch fly wheel for extra cooling and longer life- Quality pilot valve unloaderWarranties

AM2-PK95-08M

5YEARLIMITED


3YEARLIMITED


2YEARLIMITED



3YEARLIMITED


Strong and durable, this unit can store ample pressure and is available in both portable or stationary. 20-Gallon

AM2-PH09-20M


Two Stage Gasoline

PORTABLE MODELMODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) SHIP WT. NET WT.

AM2-PH09-20M 17.2 @ 175 270cc Honda OHV 46in.x26in.x39.5in. 356 lb. 306 lb.

STATIONARY MODELMODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

AM2-SH09-20M 17.2 @ 175 270cc Honda OHV 37in.x18in.x38in. 23.193in.x11in. 356 lb. 306 lb.*Equipped with 150-PSI maximum rated regulator.


AW-0007-0196 Rear lifting handle (N/A for models with electric start options) - Allows unit to be lifted from both ends AM2-PH09-20MAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed polyester,


AX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0015 Electric start (battery and cables not included) - For easy starting All modelsAX-0017 Electric start (battery and cables included) - For easy starting All modelsConsult Factory Cable throttle control - Automatically throttles down engine to conserve fuel All models

All Models Feature:Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure- Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Stainless-steel braided discharge hose- Large canister intake filterEngine - Industrial Honda OHV (Electric start optional)- Pneumatic idle control to conserve fuel- Engine oil drainFrame - Powder coated ASME coded 20-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls engine straight to ensure constant belt alignment- 16.5-inch fly wheel for extra cooling and longer life- Quality pilot valve unloaderAM2-PH09-20M Model Additional Features:Frame- Convenient lifting handles- Two pneumatic tires and steel hubsWarranties for All Models

5YEARLIMITED


3YEARLIMITED


2YEARLIMITED




Electric start Honda OHV engine is available as an option

Two stage air compressors provide a reliable air source for commercial, industrial and automotive applications. More efficient than their single stage counterparts, these models compress air to a

higher pressure while generating less heat, reducing wear and extending compressor life. Choose from the 30-gallon or 80-gallon tank mounted options or the base mount unit for easy installation.

30 & 80-Gallon & Base-Mount


Two Stage Gasoline


30-GALLON TANK-MOUNTED MODELSMODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

ABS-13H-30H 29.0 @ 175 389cc Honda OHV 42in.x19in.x45in. 23.75in.x13.5in. 480 lb. 416 lb.ABS-14K-30H 29.0 @ 175 429cc Kohler OHV 42in.x19in.x45in. 23.75in.x13.5in. 480 lb. 416 lb.ABS-14S-30H 29.0 @ 175 404cc Subaru OHC 42in.x19in.x45in. 23.75in.x13.5in. 480 lb. 416 lb.

80-GALLON TANK-MOUNTED MODELSMODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

ABS-13H-80H 29.0 @ 175 389cc Honda OHV 52in.x26.5in.x53in. 20.75in.x23.5in. 560 lb. 496 lb.ABS-14S-80H 29.0 @ 175 404cc Subaru OHC 52in.x26.5in.x53in. 20.75in.x23.5in. 560 lb. 496 lb.

BASE-MOUNTED MODELSMODEL NUMBER CFM @ PSI* DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

ABS-13H-B 29.0 @ 175 389cc Honda OHV 36.5in.x19in.x28in. 21in.x13.5in. 279 lb. 215 lb.ABS-14S-B 29.0 @ 175 404cc Subaru OHC 36.5in.x19in.x28in. 21in.x13.5in. 279 lb. 215 lb.


ACCESSORIES & OPTIONSPART NUMBER DESCRIPTION FITS MODELS

3-0304 Pump - Replacement pump All modelsAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed

polyester, water resistant, drawstrings to secure coverAll models

Consult Factory Cable throttle control - Automatically throttles down engine to conserve fuel Honda modelsIX-0001 Vibration pads - Isolators protect the unit from vibration during use Tank-mounted models

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure- Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head and cylinder for extended durability- Stainless-steel braided discharge hose- Oil level sight indicatorEngine - Industrial Honda OHV or Kohler OHV engine with pneumatic idle control to conserve fuel- Subaru OHC engine with cable throttle control to conserve fuel- Electric start standard - battery and cables not includedFrame - 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated totally enclosed belt guard- Tabbed design offers flexible installationComponents - Regulator and two gauges for tank and outlet pressure- ASME safety valves- Belt tightening system pulls engine straight to ensure constant belt alignment- 16.5-inch fly wheel for extra cooling and longer life- Tank shut-off valveTank-Mounted Models Additional Features: Frame - Powder coated ASME coded 30 or 80-gallon receiver tankWarranties for All Models

5YEARLIMITED


3YEARLIMITED


2YEARLIMITED



3YEARLIMITED


5YEARLIMITED


3YEARLIMITED


2YEARLIMITED



3YEARLIMITED


ABS-14S-30H

The hand carry, 5-gallon electric air compressor makes your jobs easier and more efficientby supplying extra air power. Simply plug it into the nearest outlet and go. 5-Gallon


Single Stage Electric

AC1-HE02-05M1


MODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR PLUG TYPE DIMENSIONS (LxWxH) SHIP WT. NET WT.

AC1-HE02-05M1 4.1 @ 100 2.0 HP, 120V, 14.0A NEMA 5-15P 20.5in.x15.5in.x17.5in. 65 lb. 56 lb.

Compressor Pump - Quality single stage compressor - Oil lubricated aluminum crankcase- Aluminum head for heat dissipation- Cast iron cylinder- Stainless-steel braided discharge hose- Canister inlet air filterMotor- 120V single-phase 60-Hz. motor with 15-amp plug- Thermal motor overload protectionFrame - Compact and portable twin tank design- Rubber handle for cushioned grip- 5-gallon powder coated tank assembly- Protective pump/motor housing- Rubber isolatorsComponents - Regulator and two gauges for tank and outlet pressure- Drain valves and pressure relief valves- Quick connect fittings- Start/stop control set at 95 to 125-PSIWarranties

1YEARLIMITED


1YEARLIMITED

COMPRESSORPUMP WARRANTY


This air compressor offers maximum efficiency and flexibility. The industrial electric motor features an auto start/stop and a 10-inch fly wheel for extra cooling and longer life.8-Gallon




AM1-PE02-08M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Stainless-steel braided discharge hose- Large canister intake filterMotor - Industrial-UL listed electric motor- Auto start/stop (continuous run optional)- Thermal overload motor protectionFrame - Powder coated 8-gallon twin tank receivers- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient lifting handles- Pneumatic tire and steel hub

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls motor straight to ensure constant belt alignment- 10-inch fly wheel for extra cooling and longer life- Industrial-grade pressure switchWarranties


AM1-PE15-08M 6.5 @ 100 1.5 HP, 120V, 13.2A NEMA 5-15P 44.5in.x18.5in.x25in. 190 lb. 170 lb.AM1-PE02-08M 8.4 @ 100 2.0 HP, 120V, 18.8A NEMA 5-20P 44.5in.x18.5in.x25in. 190 lb. 170 lb.



All models

AX-0002 Auto drain plastic bowl - Drains moisture from air system All modelsAX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0005 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere All models



1YEARLIMITED


2YEARLIMITED



Packed with features that let you take on more demanding jobs with more storing capacity, this electric model is the perfect solution for service shops. 20-Gallon

AM1-PE02-20M




AM1-PE15-20M 6.5 @ 100 1.5 HP, 120V, 13.2A NEMA 5-15P 40in.x24in.x32in. 265 lb. 196 lb.AM1-PE02-20M 8.4 @ 100 2.0 HP, 120V, 18.8A NEMA 5-20P 40in.x24in.x32in. 260 lb. 198 lb.



All models

AX-0002 Auto drain plastic bowl - Drains moisture from air system All modelsAX-0003 Manual drain metal bowl - Drains moisture from air system All modelsAX-0008 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere All models

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Stainless-steel braided discharge hose- Large canister intake filterMotor - Industrial-UL listed electric motor- Auto start/stop (continuous run optional)- Thermal overload motor protectionFrame - Powder coated ASME coded 20-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts- Convenient lifting handle- Two pneumatic tires and steel hubs

Components - Regulator and two gauges for tank and outlet pressure- Manual drain valves for proper maintenance- Belt tightening system pulls motor straight to ensure constant belt alignment- 10-inch fly wheel for extra cooling and longer life- Industrial-grade pressure switchWarranties



1YEARLIMITED


2YEARLIMITED




80 & 120-Gallon


Two Stage Electric These 80 and 120-gallon horizontal and vertical models have a large

capacity storage tank offering longer run times and faster recovery.


Built in the highest quality possible, Mi-T-M air compressors are efficient and dependable. The 80 and 120-gallon horizontal and vertical models have a large capacity storage tank which offers longer run times and faster recovery for as long as you need them to do the job.

80-GALLON HORIZONTAL MODELSMODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

AAS-23105-80H 17.8 @ 175 5.0 HP, 230V, 1Ø, 23.0A 52in.x26.5in.x53in. 20.75in.x23.5in. 570 lb. 499 lb.ACS-23175-80H 23.5 @ 175 7.5 HP, 230V, 1Ø, 31.0A 52in.x26.5in.x53in. 20.75in.x23.5in. 665 lb. 594 lb.

80-GALLON VERTICAL MODELSMODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

AAS-23105-80V 17.8 @ 175 5.0 HP, 230V, 1Ø, 23.0A 33in.x25in.x73in. 15.63in.x15.63in. 570 lb. 499 lb.ACS-23175-80V 23.5 @ 175 7.5 HP, 230V, 1Ø, 31.0A 33in.x25in.x73in. 15.63in.x15.63in. 665 lb. 594 lb.


ADS-23110-120H 34.2 @ 175 10.0 HP, 230V, 1Ø, 39.0A 74in.x26.5in.x58in. 34.5in.x23.5in. 904 lb. 785 lb.AES-23315-120H 46.5 @ 175 15.0 HP, 230V, 3Ø, 38.0A 74in.x26.5in.x58in. 34.5in.x23.5in. 995 lb. 876 lb.

Note: Starter is not included with unit, must add starter option.Consult factory for availability of more air compressor models and voltages.


IX-0013 Starter (5.0 HP) - For thermal overload protection AAS-23105-80H & AAS-23105-80VIX-0017 Starter (7.5 HP) - For thermal overload protection ACS-23175-80H & ACS-23175-80VIX-0021 Starter (10.0 HP) - For thermal overload protection ADS-23110-120HIX-0026 Starter (15.0 HP) - For thermal overload protection AES-23315-120H

Consult factory for availability of more options and accessories.

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure- Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head and cylinder for extended durability- Stainless-steel braided discharge hose- Oil level sight indicatorMotor - Low RPM industrial motorFrame - Powder coated ASME coded 80 or 120-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated totally enclosed belt guard- Fly wheel for extra cooling and longer life

1YEARLIMITED


2YEARLIMITED



ACS-23175-80V

AES-23315-120H

Components - ASME safety valves- Belt tightening system pulls motor straight to ensure constant belt alignment- Intake filter/silencer- Tank shut-off valveWarranties

AAS Models only

80 & 120-Gallon


Two Stage Electric M Series

ACS-23105-80VM

Vibration isolator pads protect the tank from stress

NEMA-4 starter box with magnetic motor starter for thermal overload protection

Air-cooled aftercooler removes up to 65% of moisture and drops temperature within 10°F of ambient

Low oil sensor does not allow unit to start when oil levels fall below an adequate level

Hour meter displays the number of hours compressor has been in operation

Tank drain automatically drains liquid from air receiver

These standard features are what sets the M Series air compressors apart from our standard line-up.


The ultimate in air compressors, the M Series comes complete with all available options to meet the most demanding industrial air needs including machine shops, automotive repair facilities and general industrial applications.

80 & 120-Gallon


M Series Two Stage Electric



ACS-23105-80HM 18.0 @ 175 5.0 HP, 230V, 1Ø, 23.0A 52in.x26.5in.x53in. 20.75in.x23.5in. 615 lb. 544 lb.ACS-23175-80HM 23.5 @ 175 7.5 HP, 230V, 1Ø, 31.0A 52in.x26.5in.x53in. 20.75in.x23.5in. 780 lb. 709 lb.

80-GALLON VERTICAL MODELSMODEL NUMBER CFM @ PSI HORSEPOWER/MOTOR DIMENSIONS (LxWxH) BOLT DOWN (LxW) SHIP WT. NET WT.

ACS-23105-80VM 18.0 @ 175 5.0 HP, 230V, 1Ø, 23.0A 33in.x25in.x73in. 15.63in.x15.63in. 695 lb. 544 lb.ACS-23175-80VM 23.5 @ 175 7.5 HP, 230V, 1Ø, 31.0A 33in.x25in.x73in. 15.63in.x15.63in. 780 lb. 709 lb.


ADS-23110-120HM 34.2 @ 175 10.0 HP, 230V, 1Ø, 39.0A 74in.x26.5in.x58in. 34.5in.x23.5in. 890 lb. 811 lb.AES-23315-120HM 46.5 @ 175 15.0 HP, 230V, 3Ø, 38.0A 74in.x26.5in.x58in. 34.5in.x23.5in. 935 lb. 856 lb.

Consult factory for availability of more M Series air compressor models and voltages.

ACS-23105-80HM

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure- Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head and cylinder for extended durability- Stainless-steel braided discharge hose- Oil level sight indicatorMotor - Low RPM industrial motorFrame - Powder coated ASME coded 80 or 120-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- Totally enclosed heavy-duty belt guard- Fly wheel for extra cooling and longer lifeComponents - ASME safety valves- Pressure gauge- Belt tightening system pulls motor straight to ensure constant belt alignment - Intake filter/silencer- Tank shut-off valveWarranties

1YEARLIMITED


2YEARLIMITED



AES-23315-120HM

A I R C O M P R E S S O R / G E N E R A T O R C O M B I N A T I O N

Benefits


The benefits of an air compressor/generator combination:- Compressor/generators offer you double the convenience - you can operate air tools and at the same time power the lights in your work area.

- Save money by purchasing one combination unit instead of an air compressor and generator separately.

- Offers a relatively small footprint compared to owning two pieces of equipment.

- Only one unit to maintain, therefore saving time and money on troubleshooting and parts.

- Handy for remote locations where air and power are both required but not available.

- Travels well. The stationary model can be mounted on the back of a service truck or work trailer, utilizing a minimum amount of space.

- The 20-amp outlets on the large (AG2) models can run a small wire-feed welder. This is especially useful for farmers.

- Particularly useful in the following industries/applications: - Agricultural - Construction - Auto service industry/ Road-side assistance - Virtually any service truck that repairs equipment in the field oron the farm or construction site

Uses for a combination air compressor/generator: Air Compressor Generator - Impact wrenches, grinders, - Jobsites drills, and nailers - Power tools - Shops - Air - Plants - Tires - Air - Offices - Sand blasters - Farms - Paint sprayers - Homes - Air/hydraulic pumps - Mobile lights - Electric/hydraulic pumps - Battery chargers - Air jacks - Fans - Grease pumps - Electric/hydraulic pumps - Air tools - Saws, drills and grinders

SINGLE STAGE MODELS ALTERNATOR WATTAGE

MODEL NUMBERCFM @ 100 PSI

CFM @ 125 PSI MAX. OUTPUT

CONT. WITH COMP. ON-LOAD

CONT. WITH COMP. OFF-LOAD RECEPTACLES DISPLACEMENT/ENGINE DIMENSIONS (LxWxH) SHIP WT. NET WT.

AG1-PH65-08M1 11.6 10.9 1800 watts 600 watts 1600 watts (2) NEMA 5-15R 196cc Honda OHV 44.5in.x26in.x27.5in. 257 lb. 207 lb.AG1-PR07-08M1 11.6 10.9 1800 watts 600 watts 1600 watts (2) NEMA 5-15R 211cc Subaru OHC 44.5in.x26in.x27.5in. 257 lb. 207 lb.

TWO STAGE MODELS ALTERNATOR WATTAGE


CFM @ 175 PSI* MAX. OUTPUT



AG2-PH13-08M1 16.3 15.7 3500 watts 2300 watts 3300 watts (4) NEMA 5-15R 389cc Honda OHV 52in.x30in.x36in. 430 lb. 365 lb.AG2-SH13-08M1^ 16.3 15.7 3500 watts 2300 watts 3300 watts (4) NEMA 5-15R 389cc Honda OHV 45in.x22in.x36in. 425 lb. 360 lb.

*Equipped with 150-PSI maximum rated regulator. ^Stationary model.


70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AG1-PH65-08M170-0358 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier Two stage models70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AG1-PR07-08M1854-0093 Service truck mount kit (recommended for models that are mounted in service truck applications) - Includes four

rubber isolators to reduce wearAG2-SH13-08M1


All models

AX-0019 Electric start (battery and cables not included) - For easy starting Two stage modelsAX-0028 Lifting hook - For easier portability Two stage modelsAX-0066 230V outlet - Adds 230V outlet to model Two stage modelsAX-0067 Electric start (battery and cables not included) - For easy starting AG1-PR07-08M1

Run your air tools and electric power tools off one convenient machine with the Mi-T-M air compressor/generator combination. Now your shop air compressor can also act as a backup power source during times of power failure. 8-Gallon

AG1-PH65-08M1


Single/Two Stage Gasoline

NEMA 5-15R

All Models Feature:Compressor Pump - Quality cast iron single or two stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Large canister intake filter- Durable stainless-steel braided discharge hose for longer lifeEngine- Honda OHV or Subaru OHC engineGenerator- Industrial 1800 or 3500-watt generator with two NEMA 5-15R receptacles (Four receptacles on two stage models)- Brushless alternator- Total harmonic distortion (THD) less than 5%- 100% copper windingsFrame - Powder coated 8-gallon twin tank receivers- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guardComponents - Belt tightening system pulls engine straight to ensure constant belt alignment- Regulator and two gauges for tank and outlet pressure- 12 or 16.5-inch fly wheel for extra cooling and longer life- Manual drain valves for proper maintenance- Quality pilot valve unloader

Portable Model Additional Features:Frame- Convenient lifting handles- Pneumatic tires and steel hubsWarranties on All Models NEMA L6-20R

20A 250VAX-0066 option

G

X

Y

5YEARLIMITED


3YEARLIMITED


2YEARLIMITED



2YEARLIMITED

ALTERNATORWARRANTY


Power this mighty unit with either a Honda, Kohler or Subaru engine, include a cast iron two-stage compressorand an industrial 3500 or 4000-watt generator and you'll have electrical power to operate air tools in your

shop or in the most remote locations. The 30-gallon storage tank gives you air capacity for extra productivity,so whatever your needs are, this all-in-one piece of equipment is well worth the investment.

30-Gallon

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Large canister intake filter- Durable stainless-steel braided discharge hose for longer lifeEngine- Honda OHV, Kohler OHV or Subaru OHC engineGenerator- Industrial 3500 or 4000-watt generator with four NEMA 5-15R receptacles- Brushless alternator- Total harmonic distortion (THD) less than 6%- 100% copper windingsFrame - Powder coated ASME coded 30-gallon receiver tank- 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts


Two Stage Gasoline

Components - Belt tightening system pulls engine straight to ensure constant belt alignment- Regulator and two gauges for tank and outlet pressure- 16.5-inch fly wheel for extra cooling and longer life- Manual drain valves for proper maintenance- Quality pilot valve unloaderWarranties

ALTERNATOR WATTAGE


CFM @ 175 PSI* MAX. OUTPUT



AG2-SH13-30M 16.3 15.7 3500 watts 2300 watts 3300 watts (4) NEMA 5-15R 389cc Honda OHV 40in.x24.5in.x45in. 500 lb. 435 lb.AG2-SK14-30M 16.3 15.7 4000 watts 3000 watts 3500 watts (4) NEMA 5-15R 429cc Kohler OHV 40in.x24.5in.x45in. 500 lb. 435 lb.AG2-SR14-30M 16.3 15.7 4000 watts 3000 watts 3500 watts (4) NEMA 5-15R 404cc Subaru OHC 40in.x24.5in.x45in. 500 lb. 435 lb.



70-0358 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier Honda & Kohler models70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AG2-SR14-30M854-0093 Service truck mount kit (recommended for models that are mounted in service truck applications) - Includes four

rubber isolators to reduce wearAll models


All models

AX-0019 Electric start (battery and cables not included) - For easy starting AG2-SH13-30MAX-0062 Electric start (battery and cables not included) - For easy starting AG2-SR14-30MAX-0063 LIfting hook - For easier portability All modelsAX-0064 Electric start (battery box included) - For easy starting AG2-SH13-30MAX-0065 Electric start (battery box included) - For easy starting AG2-SR14-30MAX-0066 230V outlet - Adds 230V outlet to model All modelsAX-0068 Idle down - When activated it automatically throttles down engine to conserve fuel, electric start is included AG2-SH13-30MAX-0069 Idle down - When activated it automatically throttles down engine to conserve fuel, electric start is included AG2-SR14-30M

AG2-SR14-30M

NEMA 5-15R NEMA L6-20R 20A 250V

AX-0066 option

G

X

Y

AX-0066 230V outlet option - adds 230V outlet to air compressor/generator

3YEARLIMITED


3YEARLIMITED


2YEARLIMITED



2YEARLIMITED

ALTERNATORWARRANTY

5YEARLIMITED



A I R C O M P R E S S O R / G E N E R A T O R / W E L D E R C O M B I N A T I O N

Benefits


The benefits of an air compressor/generator/welder combination:- Compressor/generator/welders offer convenience - you can operate air tools and at the same time power the lights in your work area.

- Save money by purchasing one combination unit instead of an air compressor, generator and welder separately.

- Offers a relatively small footprint compared to owning three pieces of equipment.

- Only one unit to maintain, therefore saving time and money on troubleshooting and parts.

- Handy for remote locations where air, power and welding are all required but not available.

- Travels well. The stationary model can be mounted on the back of a service truck or work trailer, utilizing a minimum amount of space while keeping your equipment in service.

- Particularly useful in the following industries/applications: - Agricultural - Construction - Auto service industry/Road-side assistance - Virtually any service truck that repairs equipment in the field, on the farm or construction site

Uses for a combination air compressor/generator/welder: Air Compressor Generator Welder - Impact wrenches, grinders, - Jobsites This stick welder will work for construction drills, and nailers - Power tools or field repair with the following materials: - Shops - Air - Plants - Carbon steel - Tires - Air - Offices - Stainless-steel - Sand blasters - Farms - Low and high alloy steel - Paint sprayers - Homes - Ductile iron - Air/hydraulic pumps - Mobile lights - Cast iron - Electric/hydraulic pumps - Battery chargers - Air jacks - Fans - Grease pumps - Electric/hydraulic pumps - Air tools - Saws, drills and grinders


Features


Subaru OHC engine with low-oil shutdown and electric start (battery and cables not included)

Belt tightening system pulls engine and pump straight to ensure constant belt alignment

Brush-type 2-pole 120V alternator

Industrial 5000-watt generator with one L14-20R and two NEMA 5-20R receptacles

170-amp arc welder with amperage selection switch Quality cast iron two stage compressor

with venting system for reduced crankcase temperature and pressure

Steel braided supply hose - easy maintenance, won't fracture with vibration

Tank-mounted isolator system reduces vibration between the tank and base plate for smooth operation

Powder coated ASME coded 30-gallon receiver tank

Offering the convenience of three machines in one, this model combines a 170-amp arc welder, a two-stage aircompressor and a 5000-watt generator. Save space, save money and reduce your load capacity with this

combination unit. With only one engine, you will save time on service parts and maintenance.


Two Stage Gasoline


AGW Series

AGW-SR14-30M

Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure

5YEARLIMITED


2YEARLIMITED



2YEARLIMITED

ALTERNATORWARRANTY

OperationGenerator Mode - AC current only - Selector switch set to idle down - engine will idle down when generator is not in use and tank pressure is 175 PSI - Switch is set to full throttle - engine will run full throttle continuouslyWelder Mode - DC current only - Engine must be running full throttle - Selector switch must be set to full throttleEngine - Performance-proven engine with low-oil shutdown- Electric start (battery and cables not included)Compressor Pump - Splash lubricated cast iron crankcase to extend the hours of performance- Cast iron head for heat dissipation- Durable stainless-steel braided discharge hose for longer lifeGenerator - Brush-type 2 pole 120V/240V alternator- Total harmonic distortion (THD) less than 6%- 100% copper windings

Welder - Amperage selection switch, 170 maximumFrame - Powder coated ASME coded 30-gallon receiver tank (AGW-SR14-30M only) - 3⁄16-inch base plate to reduce vibration- 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to beltsComponents - Belt tightening system pulls engine straight to ensure constant belt alignment- Manual drain valves for proper maintenance- Regulator and two gauges for tank and outlet pressure- 16.5-inch fly wheel for extra cooling and longer life- Quality pilot valve unloaderWarranties

Industrial 5000-watt generator with one L14-20R and two NEMA 5-20Rreceptacles

The adjustable welding amperage has a maximum rating of 170-amps, and features control settings with a minimum/maximum switch for precise amperage selection


Two Stage Gasoline


AGW Series

AGW-SR14-B

MODEL NUMBER AGW-SR14-30M AGW-SR14-BENGINEDISPLACEMENT/ENGINE 404cc Subaru OHC 404cc Subaru OHCRATED SPEED 3600 RPM 3600 RPMCOMPRESSORCFM @ 100 PSI 16.3 16.3CFM @ 175 PSI* 15.7 15.7TANK 30-gallon receiver tank Base-mount modelGENERATORMAX. AC OUTPUT 5000 watts 5000 wattsRATED AC OUTPUT 4500 watts 4500 wattsALTERNATOR WATTAGE

CONT. ON-LOAD @ 100 PSI 3000 watts 3000 wattsCONT. ON-LOAD @ 175 PSI 2500 watts 2500 watts

FREQUENCY/VOLTAGE 60Hz/120V/240V 60Hz/120V/240VMAX. AMPS (120V/240V) 41.7/20.8 off-load 41.7/20.8 off-loadCONT. AMPS (120V/240V) 37.5/18.7 off-load 37.5/18.7 off-loadRECEPTACLES (2) 120V, 20A GFCI duplex

120V/240V, 20A twist lock(2) 120V, 20A GFCI duplex120V/240V, 20A twist lock

WELDERDUTY CYCLE (10 MIN. RUN TIME) 150A @ 100% 150A @ 100%DC VOLTAGE 50-170A working range 50-170A working rangeMISCELLANEOUSDIMENSIONS (LxWxH) 46in.x22in.x47in. 49in.x22in.x28.5in.SHIP WT. 650 lb. 449 lb.NET WT. 585 lb. 384 lb.



70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier All modelsAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from

600-denier vinyl-backed polyester, water resistant, drawstrings to secure coverAll models

AX-0070 Battery tray, box and cables - Adds the battery tray, box and cables to your electric start engine, do not use if unit will be truck-mounted

All models

IX-0001 Vibration pads - Isolators protect the unit from vibration during use AGW-SR14-30M

NEMA L14-20R125/250V

GFCI 5-20R


Air Compressor Pumps


Best Pump Warranty in the IndustryThe Mi-T-M Pump Exchange Program provides Mi-T-M customers pump replacement for the warranty period of two years from the date of purchase. If the air compressor pump fails due to a manufacturing defect during the two year warranty

period, Mi-T-M will replace the pump at no charge. The air compressor should be returned to the Mi-T-M authorized dealer where it was purchased. The dealer will remove the pump and replace it with another single or two stage Mi-T-M pump at no charge. The Pump Exchange Program is not transferable and covers all pump problems with the exception of abuse or

lack of basic general maintenance as stated in the owners manual and warranty statement.

- The sturdy cast iron crankcase is bi-supported for smooth running, longer bearing life and less maintenance.- An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication.- Oversized ball-bearing style shaft bearings allow for smooth operation and longer life.- Crankcase is vented to atmosphere through an exclusive labyrinth system, avoiding the presence of oil into the streamline.- High profile fin design on cylinders optimizes heat dissipation.- Reversible cylinder head allows discharge to right or left side of pump.- Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life.- Cast iron head for heat dissipation.- Industrial-duty inlet filter/silencer for remarkably low sound levels.

Single Stage Cast Iron Compressor Pump

G

F

D

C

E

H

B

Cast iron construction (excluding manifold)

with all components precision CNC machined.

1. The sturdy iron crankshaft is bi-supported for smooth running, longer bearing life and less maintenance.2. An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication.3. Crankcase is vented to atmosphere.4. Oversized ball-bearing style shaft bearings allow for smooth operation and longer life.5. Venting system reduces crankcase temperature and pressure.6. High profile fin design on cylinders optimizes heat dissipation.7. Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life.8. Cast iron head for heat dissipation.- Oil sight glass for easy monitoring of the correct oil level. (not pictured)- Finned copper intercooler for heat dissipation. (not pictured)

Two Stage Cast IronCompressor Pump

I

Low operating speed reduces wear and

extends the life of all components.

Rugged pump design assures reliability

and long maintenance intervals.


Accessories

Coupler Test BarCoupler test bar includes four 1⁄4-inch plugs; Tru-flate Automotive Style, Industrial Interchange Style, ARO Style and Lincoln Style.17-4952

Brass FittingsBarbed Hose FittingsThreaded end connects tools, fittings, couplers or plugs. Barbed hose fittings repair or assemble damaged or bulk hose. Corrosion-resistant brass construction.23-0050 (3⁄8-male x 1⁄2-hose) 23-0051 (1⁄4-male x 1⁄4-hose) 23-0052 (3⁄8-male x 1⁄4-hose) 23-0069 (1⁄4-male x 3⁄8-hose)23-0073 (3⁄8-male x 3⁄8-hose)

Brass CouplingsUse to combine two short hoses into one long hose. Corrosion-resistant brass construction.23-0002 (1⁄4-inch FPT x 1⁄4-inch FPT) 23-0103 (1⁄4-inch MPT x 1⁄4-inch MPT)

Barbed Hose SplicersRepair damaged hoses by combining hose sections together with our barbed hose splicers. Corrosion-resistant brass construction.23-0415 (Fits 1⁄4-inch I.D. hose) 23-0416 (Fits 3⁄8-inch I.D. hose)

From fittings to drains, pumps to air chucks and everything in between, Mi-T-M is a one-stop shop for all your air compressor accessory needs.

Steel Hex NipplesUsed for when you have a female NPT thread and need a male NPT thread. Corrosion-resistant steel construction.24-0010 (3⁄8-inch x 3⁄8-inch) 24-0024 (1⁄2-inch x 3⁄8-inch) 24-0031 (1⁄2-inch x 1⁄2-inch) 24-0145 (1⁄4-inch x 1⁄4-inch)24-0146 (3⁄8-inch x 1⁄4-inch) 24-0265 (1⁄2-inch x 1⁄4-inch)

GaugesUse our gauges to monitor tank and outlet pressures.22-0257 (200-PSI maximum rating) 22-0271 (300-PSI maximum rating)- 1⁄8-inch MPT

Air ChucksUse air chucks to help maintain proper tire pressure.AT-3001 (Dual foot - 1⁄4-inch FPT) AT-3002 (Ball foot - 1⁄4-inch FPT)AT-3003 (Deluxe air inflator with 12-inch hose; 12 to 120-PSI)

Engine Oil Drain Kits14-inch flexible drain hose makes oil changes cleaner and easier.70-0357 (118cc and 196cc Honda & 208cc Kohler engines) 70-0358 (270cc and 389cc Honda & 429cc Kohler engines)70-0380 (126cc, 211cc, 265cc, and 404cc Subaru engines)

Electric Compressor DrainAutomatically drains filters, compressor tanks, drip legs, aftercoolers and receivers.AT-4012 (1⁄4-inch NPT connector)- Not for use on Air Compressor/Generator models

Air/Liquid Adapter KitUsed for filling tires with liquids. Connects a standard tractor valve to 3⁄4-inch garden hose bibb. Push-button bleeder valve releases trapped air. Two extra bushings included to fit standard air/water valves, new style fast flow valves, large bore valves and extensions or standard valve stems.23-0414

Air Hoses/Leader HoseAir HosesIdeal for most compressor lines and pneumatic tools. Non-conductive oil and abrasion resistant outer cover.15-0230 (50-foot x 3⁄8-inch PVC) 15-0231 (25-foot x 3⁄8-inch PVC)15-0328 (50-foot x 3⁄8-inch Hybrid polymer) 15-0327 (25-foot x 3⁄8-inch Hybrid polymer)- 1⁄4-inch NPT fittings- Bend restrictors

Leader HoseOur leader hose attaches between the air hose and your tool, allowing for more flexibility and safety.15-0229 (24-inch leader hose swivel) - Flexible hose- 360° swivel fitting

Blow GunsOur blow guns provide a leak-proof seal for blowing dirt and debris from lines with high pressure air.AT-3004 (Blow gun, standard rubber tip) AT-3005 (Blow gun, safety tip)AT-3007 (AT-3005 with 1-foot extension) AT-3008 (AT-3005 with 2-foot extension)AT-3009 (AT-3005 with 4-foot extension)

AT-3001

AT-3003

AT-3002

AT-3004

AT-3005

AT-3008

23-0073

24-0010

15-0229

15-0230


22-0271 22-0257

24-0265

23-0002

23-0415


Accessories


PlugsAdd the ability to easily connect and disconnect your air tools and air hoses.17-0049 (1⁄4 MPT-1⁄4 Industrial Interchange Style) 17-0050 (1⁄4 MPT-1⁄4 Automotive Style)17-0051 (1⁄4 MPT-1⁄4 Lincoln Style) 17-0052 (1⁄4 MPT-1⁄4 ARO Style)17-0053 (1⁄4 FPT-1⁄4 Industrial Interchange Style) 17-0054 (1⁄4 FPT-1⁄4 Automotive Style)17-0055 (1⁄4 FPT-1⁄4 Lincoln Style)17-0056 (1⁄4 FPT-1⁄4 ARO Style)17-0061 (3⁄8 MPT-3⁄8 Industrial Interchange Style)17-0062 (3⁄8 FPT-3⁄8 Industrial Interchange Style)23-0017 (3⁄8-inch to 1⁄4-inch reducer)

FiltersOur air compressor filters remove dirt, debris and water in air line.AT-4004-M (1⁄4-inch poly bowl) - Includes bowl guard and manual drain- 150-psig maximum supply pressureAT-4005-M (1⁄2-inch metal bowl) - Main line filter- Includes sight glass and manual drain- 250-psig maximum supply pressureAT-4006-M (3⁄8-inch poly bowl) - General purpose filter- Includes bowl guard and manual drain- 150-psig maximum supply pressureAT-4007-M (Disposable in-line filter) - 1⁄4-inch MPT x 1⁄4-inch FPT- Desiccant, disposable filter and regulator in one compact unitAT-4008-M (Air tool filter) - 1⁄4-inch MPT x 1⁄4-inch FPT

Filter/RegulatorOur combination air compressor filter/regulator removes dirt, debris and water in air line while reducing and maintaining pressure levels to safely operate air tools.AT-4011-M (3⁄8-inch filter/regulator) - Poly bowl with manual drain- 150-psig maximum supply pressure

CouplersAdd the ability to easily connect and disconnect your air tools and air hoses.17-0043 (1⁄4 MPT-1⁄4 Industrial Interchange Style) 17-0044 (1⁄4 MPT-1⁄4 Automotive Style)17-0045 (1⁄4 FPT-1⁄4 Industrial Interchange Style) 17-0046 (1⁄4 FPT-1⁄4 Automotive Style)17-0047 (1⁄4 FPT-1⁄4 Lincoln Style) 17-0048 (1⁄4 FPT-1⁄4 ARO Style)17-0059 (3⁄8 MPT-3⁄8 Industrial Interchange Style)17-0060 (3⁄8 FPT-3⁄8 Industrial Interchange Style)17-0067 (3⁄8 FPT-1⁄4 Industrial Interchange Style)17-0068 (3⁄8 MPT-1⁄4 Industrial Interchange Style)

Coupler/Plug SetsAdd the ability to easily connect and disconnect yourair tools and hoses.17-0045K (1⁄4 FPT-1⁄4 Industrial Interchange Style coupler; 1⁄4 MPT-1⁄4 Industrial Interchange Style plug) 17-0046K (1⁄4 FPT-1⁄4 Automotive Style coupler; 1⁄4 MPT-1⁄4 Automotive Style plug)

RegulatorsRegulators reduce and maintain pressure levels to safely operate air tools.22-0326 - 1⁄4-inch inlet/outlet- 1⁄8-inch gauge port- 250-psig max. inlet/125-psig max. outlet22-0231 - 3⁄8-inch inlet/outlet- 1⁄8-inch gauge port- 300-psig max. inlet/150-psig max. outlet22-0358 - 1⁄2-inch inlet/outlet- 1⁄4-inch gauge port- 300-psig max. inlet/250-psig max. outlet

In-Line LubricatorsIdeal for air tool lubrication.AT-4009-M (1⁄4-inch poly bowl with bowl guard)AT-4010-M (3⁄8-inch poly bowl with bowl guard) - 150-psig maximum supply pressure

17-0044

17-0045K

AT-4005-M AT-4008-M

22-0231 22-0326

Air Filter ElementsPaper air filter replacement elements. The paper passes air through the filter with low restriction, and any dust or dirt in the air is deposited on the pleated outer surface of the element.19-0218 (21⁄2-inch diameter x 3⁄8-inch M) - Replacement filter for 19-021719-0082 (31⁄4-inch diameter x 1⁄2-inch M) - Replacement filter for 19-008319-0220 (41⁄8-inch diameter x 1-inch M) - Replacement filter for 19-0219 & 19-024019-0226 (6-inch diameter x 3⁄4-inch M) - Replacement filter for 19-0225

Air Filter CanistersHouses air filter elements19-0215 (21⁄2-inch diameter x 3⁄8-inch M) - Plastic filter canister19-0217 (21⁄2-inch diameter x 3⁄8-inch M)19-0083 (31⁄4-inch diameter x 1⁄2-inch M) 19-0219 (41⁄8-inch diameter x 1-inch M) 19-0225 (6-inch diameter x 3⁄4-inch M) 19-0240 (41⁄8-inch diameter x 1⁄2-inch M) - Metal filter canister

19-0082

19-0217

17-0067

17-0051

17-0062

Replacement PumpsSingle Stage PumpsSingle stage replacement pump, cast iron with cast iron head.3-0303 - Fits units up to 3.0-HP electric or 210cc gasoline3-0315 - Fits units up to 2.0-HP electric

Building An Efficient Air SystemCompressed-air-powered equipment and machinery are critical elements in the productivity, efficiency and economy of today's industry. Quality air is the essential element for effective operation of this equipment. Water and dirt can cause major problems in compressed air lines. The use of filters that remove moisture and impurities from the air help high-speed pneumatic production lines operate more efficiently. Regulators and lubricators may also be added to control and lubricate downstream equipment. A quality air system can save time, money and keep equipment operating at maximum efficiency.

Air Compressor

Air Operated Tools

Paint Spraying

AT-4012-M - 1⁄4-inch NPT Electric compressor drain automatically drains liquid from tank

AT-4006-M - 3⁄8-inch NPT General purpose filter with polycarbonate bowl and manual drain, removes water and debris

AT-4008-M Air tool filter removes dirt and debris

AT-4010-M - 3⁄8-inch NPT Lubricator with polycarbonate bowl injects a fine stream of oil to lubricate air tools

22-0231Regulator reduces pressure to safe operating level for air tools

AT-4011-M - 3⁄8-inch NPT Filter/regulator with polycarbonate bowl and manual drain combines filter and regulator into one compact unit

AT-4007-M In-line desiccant, disposable filter and regulator in one compact unit

AT-4005-M - 1⁄2-inch NPT Main line filter with manual drain and metal bowl removes water and debris

Hot air leaves compressor, water vapor cools and liquefies as it goes downstream


AccessoriesTwo Stage PumpsTwo stage replacement pump, cast iron with cast iron head.3-0298 - Fits units up to 5.0-HP electric or 270cc gasoline3-0304 - Fits units up to 389cc gasoline3-0312 - Fits ACS Series units3-0313 - Fits ADS Series units3-0314 - Fits AES Series units



System Set-up & Air Estimating Guide


INDUSTRIAL EQUIPMENT CFM REQUIREMENTS BASED ON NORMAL USAGE

Miscellaneous Portable Tools at 70 to 90 PSITools CFMDrill, 1⁄6" to 3⁄8" 6.3Drill, 3⁄8" to 5⁄16" 8.8Screwdriver, #2 to #6 Screw 3.0Screwdriver, #6 to 5⁄16" Screw 6.0Tapper, to 3⁄8" 5.0Nutsetters, to 3⁄8" 6.0Nutsetters, to 3⁄4" 7.5Impact Wrench, 1⁄4" 3.8Impact Wrench, 3⁄8" 5.0Impact Wrench, 1⁄2" 7.5Impact Wrench, 3⁄4" 8.8Impact Wrench, 11⁄4" 13.8Die Grinder, Small 3.8Die Grinder, Medium 6.0Horizontal Grinder, 2" 5.0Horizontal Grinder, 4" 15.0Horizontal Grinder, 6" 15.0Horizontal Grinder, 8" 20.0Vertical Grinders and Sanders, 5" Pad 8.8Vertical Grinders and Sanders, 7" Pad 15.0Vertical Grinders and Sanders, 9" Pad 17.5Burring Tool, Small 3.8Burring Tool, Large 6.0Rammers, Small 3.3Rammers, Medium 8.5Rammers, Large 10.0Backfill Tamper 6.3Compression Riveter 0.2 cu. ft. per cycle Nailers and Staplers 5.0 to 8.0 Riveter 6.0Paint Spray Gun 5.0Scaling Hammer 3.0Chipping Hammer 7.5Riveting Hammer 7.5Circular Saw, 8" 11.3Circular Saw, 12" 16.3Lightweight Chain Saw 7.0Heavy-Duty Chain Saw 21.8

AUTOMOTIVE EQUIPMENT CFM REQUIREMENTS BASED ON TOOLS BEING USED 25% OF THE TIME

Portable ToolsEquipmentPSI Range CFM

Air Filter Cleaner 70 to 100 3.0 Body Polisher 70 to 100 2.0 Body Sander, Orbital 70 to 100 5.0 Brake Tester 70 to 100 3.5 Carbon Remover 70 to 100 3.0 Dusting Blow Gun 90 to 100 2.5 Drill, 1⁄16" to 3⁄8" 70 to 90 4.0 Impact Wrench, 3⁄8" Square Drive 70 to 90 2.0 Impact Wrench, 1⁄2" Square Drive 70 to 90 3.5 Impact Wrench, 3⁄4" Square Drive 70 to 90 7.5 Impact Wrench, 1" Square Drive 70 to 90 10.0 Die Grinder 70 to 90 5.0 Vertical Disc Sanders 90 to 100 10.0Filing/Sawing Machine, Small 90 to 100 3.0 Filing/Sawing Machine, Large 90 to 100 5.0 Burring Tool 90 to 100 5.0 Tire Rim Stripper 125 to 150 6.0 Tire Changer 125 to 150 5.5 Tire Inflation Line 125 to 150 1.5 Tire Spreader 125 to 150 1.0 Air Hammer 90 to 100 4.0 Tire Hammer 90 to 100 12.0Bead Breaker 125 to 150 12.0Spring Oiler 90 to 100 4.0 Spray Gun Engine Cleaner 90 to 100 5.0 Production Paint Spray Gun 90 to 100 8.5 Touch-Up Paint Spray Gun 90 to 100 3.5 Undercoat Paint Spray Gun 90 to 100 19.0Grease Gun 120 to 150 3.0 Hydraulic Lift 145 to 175 6.0 Hydraulic Floor Jack 125 to 150 6.0 Pneumatic Garage Door 120 to 150 3.0 Radiator Tester 90 to 100 1.0 Transmission/Differential Flusher 70 to 100 3.0 Fender Hammer 70 to 100 9.0 Medium-Duty Sander 70 to 100 40.0

Important Steps to an Air System Set-up1. Main-line filter and regulator should be installed at least 20-feet from the compressor. The air will cool down, allowing much of the water vapor to condense naturally for removal by filtration.

2. All line-drops (workstations) should be taken from the top of the main line. This prevents water from flowing into branch lines.

3. Galvanized pipe is recommended when building an air system.

Follow illustration to the right when building a workstation drop.

Drop a 6-inch pipe to drip leg Goose neck all workstations

Use galvanized pipe

Air Equipment Estimating GuideAlways use free air (CFM) and pressure (PSI) specifications from the nameplate on the device or from the manufacturer. Free air figures (in the table below) are averages and may differ by specific brand.

P O R T A B L E G E N E R A T O R S

3600, 6000 & 8000-Watt Gasoline


With commitment to quality and performance, Mi-T-M ChoreMaster ® generators offer great power in a compact package. They provide maximum output under any given

situation and are durable and reliable featuring a Mi-T-M OHV engine.

All Models Feature:Engine- Mi-T-M OHV engine with low-oil shutdownAlternator- Total harmonic distortion (THD) less than 6%- Copper and aluminum windingsFrame- Low profile, compact design- Wraparound frame with 1-inch steel tubingComponents- Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles- Large low-tone mufflers- Engine on/off switch- Fuel shut-off valve- DC charging/battery chargingMiscellaneous- Circuit breaker protectedWarranties

3600-Watt Additional FeaturesAlternator- Brushed 120V alternator

3600 & 6000-Watt Additional Features:Engine- Recoil starting system

6000 & 8000-Watt Additional Features:Alternator- Brushed 120V/240V alternatorEngine- Automatic idle controlFrame- Wheel kit with tires and rubber gripped handles

8000-Watt Additional Features:Engine- Electric start (battery not included)

GEN-3600-0MM0

ChoreMaster® Series

New Models

GFCI 5-20R

NEMA L5-30R125 VAC

MODEL NUMBER GEN-3600-0MM0 GEN-6000-0MM0 GEN-8000-0MMEMAX. AC OUTPUT 3600 watts 6000 watts 8000 wattsRATED AC OUTPUT 3000 watts 5500 watts 7000 wattsDISPLACEMENT/ENGINE 212cc Mi-T-M OHV 389cc Mi-T-M OHV 420cc Mi-T-M OHVFREQUENCY/VOLTAGE 60Hz/120V 60Hz/120V/240V 60Hz/120V/240VMAX. AMPS (120V/240V) 30.0 50.0/25.0 66.6/33.3CONT. AMPS (120V/240V) 25.0 45.8/22.9 58.3/29.2RECEPTACLES (2)120V, 20A GFCI duplex

120V, 30A twist lock(2) 120V, 20A GFCI duplex120V, 30A twist lock120V/240V, 30A twist lock

(2) 120V, 20A GFCI duplex120V, 30A twist lock120V/240V, 30A twist lock

MAIN CIRCUIT BREAKERS (2) 20A circuit breaker, single pole30A circuit breaker, single pole

(2) 20A circuit breaker, single pole30A circuit breaker, single pole30A circuit breaker, single pole

(2) 20A circuit breaker, single pole30A circuit breaker, single pole30A circuit breaker, single pole

RATED SPEED 3600 RPM 3600 RPM 3600 RPMFUEL CAPACITY 4.0 gallons 6.6 gallons 6.6 gallons RUN TIME (AT FULL LOAD) 8.5 hours 6.5 hours 6.0 hoursDIMENSIONS (LxWxH) (in.) 24.88x17.64x17.96 39.1x28.67x30.65* 39.1x28.67x30.65*SHIP WT. 134 lb. 228 lb. 237 lb.NET WT. 102 lb. 180 lb. 195 lb.

*Dimensions include the wheel kit with the handles in the down position.



All models

1YEARLIMITED

Mi-T-M ENGINEWARRANTY

2YEARLIMITED

ALTERNATORWARRANTY

3YEARLIMITED


NEMA L14-30R125/250V


3000, 4000 & 5000-Watt GasolineThis portable generator provides dependable power for homeowners seeking a reliable electrical backup and is powerful enough for most industrial and contractor needs.

MODEL NUMBER GEN-3000-1MH0 GEN-4000-0MH0 / GEN-4000-0MS0 GEN-5000-0MK0 / GEN-5000-0MS0MAX. AC OUTPUT 3000 watts 4000 watts 5000 wattsRATED AC OUTPUT 2450 watts 3500 watts 4400 wattsDISPLACEMENT/ENGINE 163cc Honda OHV 242cc Honda OHV / 211cc Subaru OHC 277cc Kohler OHV / 287cc Subaru OHCFREQUENCY/VOLTAGE 60Hz/120V 60Hz/120V/240V 60Hz/120V/240VMAX. AMPS (120V/240V) 25.0 33.3/16.7 41.7/20.8CONT. AMPS (120V/240V) 20.4 29.2/14.6 36.7/18.3RECEPTACLES 120V, 20A GFCI duplex (2) 120V, 20A GFCI duplex

120V/240V, 20A twist lock120V, 30A twist lock

(2) 120V, 20A GFCI duplex120V/240V, 20A twist lock120V, 30A twist lock

MAIN CIRCUIT BREAKERS 20A push-button (2) 20A toggle circuit breaker, single pole20A toggle circuit breaker, double pole30A toggle circuit breaker, single pole

(2) 20A toggle circuit breaker, single pole20A toggle circuit breaker, double pole30A toggle circuit breaker, single pole

RATED SPEED 3600 RPM 3600 RPM 3600 RPMDECIBEL RATING 74.8 75.7 / 74.0 73.8FUEL CAPACITY 2.6 gallons 5.7 gallons 5.7 gallonsRUN TIME (AT FULL LOAD) 7.4 hours 9.3 hours 6.8 hoursDIMENSIONS (LxWxH) 25in.x18in.x18in. 29in.x19.75in.x22.5in. 29in.x19.75in.x22.5in.SHIP WT. 146 lb. 164 / 168 lb. 198 lb.NET WT. 130 lb. 142 / 146 lb. 176 lb.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.


32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators 4000 & 5000-watt modelsAW-5090-0003 Lifting hook - For easier portability, folds down and out of the way when not in use 4000 & 5000-watt modelsAW-5740-0009 Wheel kit - For easier portability, pneumatic tires and rubber gripped handles 4000 & 5000-watt modelsAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed


GX-0004 Hour meter - Displays number of hours the unit has been in operation 4000 & 5000-watt models

All Models Feature:Engine- Low-oil shutdown engineAlternator- Total harmonic distortion (THD) less than 5%- 100% copper windingsFrame- Heavy-duty wraparound frame with 1-inch powder coated steel tubing- Low profile, compact design- Angled isolator design features four neoprene isolators Components- Large low-tone mufflers to reduce noise to lowest level possible- Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles- Fuel shut-off valve- Heavy-duty industrial air cleaners hold up under extreme conditionsMiscellaneous- USDA/USFS-approved spark arrestors- Circuit breaker protected

GEN-3000-1MH0 Model Additional Features:Alternator- Brushless 120V alternatorComponents- Large fuel tank capacity for extended run time

GFCI 5-20R

NEMA L14-20R125/250V

NEMA L5-30R125 VAC

GEN-5000-0MS0 shown with optional wheel kit (AW-5740-0009)

3YEARLIMITED


2YEARLIMITED

ALTERNATORWARRANTY

3YEARLIMITED


5YEARLIMITED



GEN-4000 & GEN-5000 Model Additional Features:Alternator- Brushless 120V/240V alternatorComponents- Easy-to-read fuel gauge- Full power switch- Fuel tanks are powder coated outside, zinc-plated inside to prevent rustingWarranties on All Models


6000, 7500 & 8000-Watt GasolineYou'll want this generator on every jobsite. Its heavy-duty wrap-around frame and

impact resistant corners minimize damage from rough handling. Engine- Low-oil shutdown engine- Electric start available (battery included)- Idle controlAlternator- Brushless 120V/240V alternator- Total harmonic distortion (THD) less than 5%- 100% copper windingsFrame- Heavy-duty wraparound frame with 1-inch powder coated steel tubing- Low profile, compact design- Angled isolator design features four neoprene isolators Components- Large low-tone mufflers to reduce noise to lowest level possible- Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles- Fuel shut-off valve- Easy-to-read fuel gauge- Voltmeter/hour meter- Fuel tanks are powder coated outside and zinc-plated inside to prevent rusting- Heavy-duty industrial air cleaners hold up under extreme conditionsMiscellaneous- USDA/USFS-approved spark arrestors- Circuit breaker protectedWarranties

GFCI 5-20RAll Models

NEMA L14-20R125/250VGEN-6000

Models

NEMA L5-30R125 VAC

GEN-7500 & 8000 Models

NEMA L14-30R125/250V

GEN-7500 & 8000 Models

GEN-8000-0MK0

3YEARLIMITED


2YEARLIMITED

ALTERNATORWARRANTY

3YEARLIMITED


5YEARLIMITED



MODEL NUMBERGEN-6000-0MH0^ / GEN-6000-0MK0 /GEN-6000-0MS0^ GEN-7500-0MH0^ GEN-8000-0MK0^ / GEN-8000-0MS0^

MAX. AC OUTPUT 6000 watts 7500 watts 8000 wattsRATED AC OUTPUT 5000 watts 6500 watts 6900 wattsDISPLACEMENT/ENGINE 389cc Honda OHV / 429cc Kohler OHV /

404cc Subaru OHC389cc Honda OHV 429cc Kohler OHV / 404cc Subaru OHC

FREQUENCY/VOLTAGE 60Hz/120V/240V 60Hz/120V/240V 60Hz/120V/240VMAX. AMPS (120V/240V) 50.0/25.0 62.5/31.25 66.7/33.3CONT. AMPS (120V/240V) 41.7/20.8 54.2/27.1 57.5/28.75RECEPTACLES (2) 120V, 20A GFCI duplex




MAIN CIRCUIT BREAKERS (2) 20A toggle circuit breaker, single pole(2) 20A toggle circuit breaker, double pole30A toggle circuit breaker, single pole

(2) 20A toggle circuit breaker, single pole30A toggle circuit breaker, single pole30A toggle circuit breaker, double pole

(2) 20A toggle circuit breaker, single pole30A toggle circuit breaker, single pole30A toggle circuit breaker, double pole

RATED SPEED 3600 RPM 3600 RPM 3600 RPMDECIBEL RATING 77.1 / 77.1 / 77.4 80.0 78.2FUEL CAPACITY 7.3 gallons 7.3 gallons 7.3 gallonsRUN TIME (AT FULL LOAD) 8.0 hours / 8.0 hours / 7.9 hours 6.9 hours 6.9 hoursDIMENSIONS (LxWxH) 29in.x24.4in.x22.5in. 29in.x24.4in.x22.5in. 29in.x24.4in.x22.5in.SHIP WT. 232 lb. 255 lb. 245 lb.NET WT. 210 lb. 233 lb. 223 lb.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.^Available with electric start (battery included).


32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators All modelsAW-5090-0004 Lifting hook - For easier portability, folds down and out of the way when not in use All modelsAW-5740-0010 Wheel kit - For easier portability, pneumatic tires and rubber gripped handles All modelsAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed



13000 & 14000-Watt GasolineDesigned for the contractor, this generator is built to withstand the most demanding applications. It is a virtual powerhouse and can be easily moved from jobsite to jobsite.

Engine- Low-oil shutdown engine with electric start (battery included)- Idle controlAlternator- Brushless 120V/240V alternator- Total harmonic distortion (THD) less than 5%- 100% copper windingsFrame- Reinforced 11⁄4-inch powder coated steel tube frame with center balanced lifting hook- Solid steel threaded axles- Four pneumatic tires with locking tire brake Components- Large low-tone mufflers to reduce noise to lowest level possible- Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles- Easy-to-read fuel gauge- Voltmeter/hour meter- Fuel tanks are powder coated outside and zinc-plated inside to prevent rusting- Heavy-duty industrial air cleaners hold up under extreme conditionsMiscellaneous- USDA/USFS-approved spark arrestors- Circuit breaker protectedWarranties

GEN-14000-1MHE

3YEARLIMITED


2YEARLIMITED

ALTERNATORWARRANTY

5YEARLIMITED



MODEL NUMBER GEN-13000-1MSE GEN-14000-1MHEMAX. AC OUTPUT 13000 watts 14000 wattsRATED AC OUTPUT 11500 watts 12000 wattsDISPLACEMENT/ENGINE 650cc Subaru OHV 688cc Honda OHVFREQUENCY/VOLTAGE 60Hz/120V/240V 60Hz/120V/240VMAX. AMPS (120V/240V) 108.3/54.2 116.7/58.3CONT. AMPS (120V/240V) 95.8/47.9 100.0/50.0RECEPTACLES (2) 120V, 20A GFCI duplex

120V, 30A twist lock120V/240V, 30A twist lock120V/240V, 50A

(2) 120V, 20A GFCI duplex120V, 30A twist lock120V/240V, 30A twist lock120V/240V, 50A

MAIN CIRCUIT BREAKERS (2) 20A toggle circuit breaker, single pole30A toggle circuit breaker, single pole30A toggle circuit breaker, double pole50A toggle circuit breaker, double pole

(2) 20A toggle circuit breaker, single pole30A toggle circuit breaker, single pole30A toggle circuit breaker, double pole50A toggle circuit breaker, double pole

RATED SPEED 3600 RPM 3600 RPMDECIBEL RATING 77.5 77.5FUEL CAPACITY 13.2 gallons 13.2 gallonsRUN TIME (AT FULL LOAD) 8.8 hours 8.0 hoursDIMENSIONS (LxWxH) 31.5in.x30.5in.x37.5in. 31.5in.x30.5in.x37.5in.SHIP WT. 573 lb. 568 lb.NET WT. 513 lb. 508 lb.



32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators All modelsGX-0003 Skid feet - For stationary applications All modelsGX-0005 50-amp twist lock receptacle - Marine receptacles for routine marine applications All models

GFCI 5-20R

NEMA L5-30R125 VAC

NEMA L14-30R125/250V

NEMA 14-50R50A

GX-0005 optionCS6369A

50A twist lock receptacle

GFCI 5-20R

MODEL NUMBER GEN-6000-0MKDMAX. AC OUTPUT 6000 wattsRATED AC OUTPUT 5000 wattsHORSEPOWER/ENGINE 9.8 HP KohlerFREQUENCY/VOLTAGE 60Hz/120V/240VMAX. AMPS (120V/240V) 50.0/25.0CONT. AMPS (120V/240V) 41.7/20.8RECEPTACLES (2) 120V, 20A GFCI duplex


MAIN CIRCUIT BREAKERS (2) 20A toggle circuit breaker, single pole(2) 20A toggle circuit breaker, double pole30A toggle circuit breaker, single pole

RATED SPEED 3600 RPMDECIBEL RATING 85.0FUEL CAPACITY 2.6 gallonsRUN TIME (AT FULL LOAD) 6.8 hoursDIMENSIONS (LxWxH) 29in.x21.62in.x22.5in.SHIP WT. 295 lb.NET WT. 273 lb.



32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators GEN-6000-0MKDAW-5090-0007 Lifting hook - For easier portability, folds down and out of the way when not in use GEN-6000-0MKDAW-5740-0006 Wheel kit - For easier portability, pneumatic tires and rubber gripped handles GEN-6000-0MKDAW-6000-1002 Equipment cover - Keeps your equipment clean, dry and looking like new, made from

600-denier vinyl-backed polyester, water resistant, drawstrings to secure coverGEN-6000-0MKD


6000-Watt Diesel

Engine- Industrial Kohler diesel engine- Electric start standard (battery included)Alternator- Brushless 120V/240V alternator- Total harmonic distortion (THD) less than 5%- 100% copper windingsFrame- Heavy-duty wraparound frame with 1-inch powder coated steel tubing- Low profile, compact design- Angled isolator design features six neoprene isolators Components- Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles- Fuel shut-off valve- Easy-to-read fuel gauge- Voltmeter/hour meter- Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting- Heavy-duty industrial air cleaners hold up under extreme conditionsMiscellaneous- Circuit breaker protectedWarranties

GFCI 5-20R NEMA L14-20R125/250V

A diesel generator from Mi-T-M is built with the highest quality generatorcomponents including the powerful Kohler engine. Known for their long life span,diesel generators typically have lower operating costs and run nearly smoke free.

3YEARLIMITED


2YEARLIMITED

ALTERNATORWARRANTY


New KohlerDiesel Model

GEN-6000-0MKD

NEMA L5-30R125 VAC


Finding the Right GeneratorTo select an engine-driven generator, you'll need to determine the power (kilowatt) requirements that must be met under operating conditions.

Undersizing the generator can be avoided by considering all of the loads that will be connected to the generator, and by determining the starting requirements (motor start) of electric motor-operated devices.

Be sure the generator you select is large enough to handle your present requirements and anticipated needs.

To determine the right size generator, add up the total watts of all lights, appliances, tools or other equipment to be connected to the generator.

Check the nameplates to determine wattage. If wattage is not shown, but amps and volts are given, the following simplified formula may be used:Amps x Volts = Watts(Ex. 12.5 Amps x 120 Volts = 1,500 Watts

To determine kilowatts (kW), use the following formula:1000 Watts = 1 Kilowatt(Ex. 1500 Watts/1000 Watts = 1.5 kW)

Charts 1, 2 and 3 will help you in selecting the proper size generator. With lights, heaters and small appliances, simply add the nameplate ratings or see Chart 1 for average wattage requirements. For portable electric tools and equipment, check the nameplate rating or use Chart 2 for average requirements. If watts and/or amps are not given and only the horsepower is shown, use Chart 3 to determine the starting and running watts.

Chart 4 is furnished as a guide for selecting the proper size of insulated copper wire when extension cables are used. We recommend the use of outdoor-rated (UL) cable, recognized type SJTW-A.

EQUIPMENT WATTAGE

Air conditioner (10,000 BTU) 2000–3000Blanket, electric 150

Broiler 1400

Clothes dryer, electric 5000–10000Coffee maker 850Dishwasher 1500–2500Fan, attic 375Fan, furnace 800–1200Fan, window 200Freezer, food 300–500Heater, radiant 1300Hot plate 1250Refrigerator/freezer 600–2000Sump pump 400–3000Toaster 1100–1700TV, color 100–350

Water heater 3000–4500Water pump 1000–3000

EQUIPMENT WATTAGE

Blower, electric 1⁄2–3 hpCompressors 1⁄4–3 hpConcrete vibrators, 3⁄4-hp 840Concrete vibrators, 1-hp 1080Concrete vibrators, 2-hp 1560Concrete vibrators, 3-hp 2400Drain cleaners 250Drills, 1⁄4-inch 250–600Drills, 3⁄8-inch 300–600Drills, 1⁄2-inch 350–1200Drills, 1-inch 1000Grinders, bench 1⁄4–1 hpGrinders, portable 1000–2500Hammers, demolition 1260Hammers, rotary 1200Heaters, space 1⁄4–2 hpLights check wattage on bulb

EQUIPMENT WATTAGE

Pump, electric 1⁄2 hp and upRouters 900–1100Sanders, belt 600–1500Sanders, disc 1200Sanders, orbital 250Saws, chain 800–1500Saws, circular, 6-inch 1000–2500Saws, cutoff 2500Saws, jig 200–800Saws, masonry 2–5 hpSaws, radial arm 1–5 hpSaws, table 1–3 hpScrewdrivers 550Shears, metal-cutting 750Wrenches, impact, 1⁄2-inch 600Wrenches, impact, 3⁄4-inch 720Wrenches, impact, 1-inch 1200

Chart 1: Home applications — approximate wattage requirements

Chart 2: Portable electric tools — approximate wattage requirements

Chart 3: Motor starting requirements

MOTOR (HP)RUNNING WATTS

WATTS REQUIRED TO START MOTOR

REPULSION INDUCTION CAPACITOR

SPLIT PHASE

1/8 275 600 850 12001/6 275 600 850 20501/4 400 850 1050 24001/3 450 975 1350 27001/2 600 1300 1800 36003/4 850 1900 2600 –1 1100 2500 3300 –

Chart 4: Insulated copper wire size

CURRENT IN AMPS

LOAD IN WATTS

#4 WIRE

#6 WIRE

#8 WIRE

#10 WIRE

#12 WIRE

#14 WIRE

#16 WIRE

#18 WIRE@ 120V @ 240V

2.5 300 600 – – – 1000 600 375 250 1505.0 600 1200 – – – 500 300 200 125 757.5 900 1800 – – – 330 200 125 80 50

10.0 1200 2400 – 625 400 250 150 100 50 3515.0 1800 3600 650 400 265 165 100 50 – –20.0 2400 4800 500 300 200 125 80 – – –25.0 3000 6000 400 250 150 100 – – – –30.0 3600 7200 325 200 125 – – – – –35.0 4200 8400 275 175 100 – – – – –40.0 4800 9600 250 150 – – – – – –45.0 5400 10800 225 – – – – – – –50.0 6000 12000 200 – – – – – – –



AccessoriesLifting HooksFor easier portability.AW-5090-0003 (Fits 4000 & 5000-watt models)AW-5090-0004 (Fits 6000 to 8000-watt gasoline models)AW-5090-0007 (Fits GEN-6000-0MKD)- Made with 1⁄4-inch powder coated steel- Bolts to generator with U-bolts- Folds down and out of the way when not in use

Wheel KitFor easier portability.AW-5740-0006 (Fits GEN-6000-0MKD)AW-5740-0009 (Fits 4000 & 5000-watt models)AW-5740-0010 (Fits 6000 to 8000-watt gasoline models)- Two 10-inch pneumatic tires- Dual rubber isolator feet- Powder coated and rubber gripped handles for comfort

Product Display RackCompact display rack solves your limited retail floor space issues.AW-9300-0013 (Display rack; includes header card, magnets and literature holder)AW-0013-0154 (Display shelves; 2 maximum)13-0176A18 (Generator stop bracket; 4 maximum)- Easy-to-assemble- Requires only 15-square-feet of floor space- Constructed of powder coated metal square tubingRack Dimensions: 61-in. W x 36-in. D x 62-in. H


RV Generator Adapter Uses the RV generator adapter to connect RV cordsets to 30A generators.32-0915- Fits generators 3200-watts or higher- 30A/125V female/male

GEN-7500-0MHE shown with optional wheel kit (AW-5740-0010)

GEN-4000-0MH0 shown with optional lifting hook (AW-5090-0003)


Lifting hook folds down and out of the way when not in use


MODEL NUMBER MOTORHORSEPOWER (CONT.) CFM WATERLIFT CAPACITY

WATER RECOVERY AMPS

DECIBEL RATING* DIMENSIONS (LxWxH) SHIP WT. NET WT.

MV-900-0MEV 120V Two stage bypass 1.3 101 87 in. 9.0 gallons 6.0 gallons 7.5 57.4 14in.x14in.x22in. 36 lb. 25 lb.*Most wet/dry vacuums have a decibel rating of 63.4 dB(a).

Motor - Two stage blower motor for longer life- Self-cooling motor designComponents- Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture - Electrical system is double-protected- 25-foot electrical cord- Electrical cord wrap- Recessed wheels and clamps- Wet and dry filter (no conversion necessary)Construction - High impact poly construction canister with lifetime warranty on canister- Industrial-grade caster wheels with platesMiscellaneous - Quiet operation- Stackable design for easy storage- CSA certified

Accessories - each unit includes the following: - 10-foot x 11⁄4-inch hose with inlet cuff- 141⁄4-inch curved plastic wand- 2-piece aluminum/plastic extension wand- 12-inch combination floor tool- 81⁄2-inch crevice tool- 12-inch commercial squeegee tool- Cartridge filter- 1 paper filter bag (replacement bags sold in packs of 5)Warranties

Wet and dry filter with no conversion

necessary

MV-900-0MEV

The Mi-T-M industrial vacuum is designed for performance, durability and filtration. The wet and dry filter means there is no need to change filters when the job calls for going from one

to the other. This model features a self-cooling motor for motor-bearing longevity and the high impact poly construction canister is so rugged it carries a lifetime warranty.

I N D U S T R I A L W E T / D R Y V A C U U M S

9-Gallon

LIFETIMECANISTERWARRANTY2YEAR

LIMTED

WARRANTYExcludes Normal

Wear I tems



Accessories & Replacement Parts

Suction Hoses & FittingsSuction Hose with Inlet Cuff15-0241- 10-foot x 11⁄4-inch hose with inlet cuffSuction Hose - Bulk15-0242- 11⁄4-inch hose without fittings- Sold by the footInlet Cuff50-0178- For bulk hose; to connect to vacuum

FiltersCartridge Filter19-0221- Hydrophobic media for wet and dry usePaper Filter Bag19-0222- 5 per pack- Disposable; for dry use only- Recommended for fine dusts

WandsAluminum/Plastic Extension Wand16-0402- 2-piece - Plastic wand with aluminum insertsCurved Plastic Wand16-0403- 141⁄4-inch - Connects hand tools to hose

ToolsCommercial Squeegee Tool33-0410- 12-inch high impact plastic- Connects directly to extension wandCombination Floor Tool33-0411- 12-inch high impact plastic- Connects directly to extension wand

1. Electric cord wrap2. Electrical system is double-protected3. Two-stage blower motor for longer life4. Stackable design for easy storage5. Wet and dry cartridge filter (no conversion necessary)6. 25-foot electrical cord7. Disposable paper filter bag (for dry use only)8. 141⁄4-inch curved plastic wand9. 10-foot x 11⁄4-inch suction hose with inlet cuff

10. 81⁄2-inch crevice tool11. Aluminum/plastic extension wand12. 12-inch commercial squeegee tool13. 12-inch combination floor tool14. Industrial-grade recessed caster wheels with plates15. High impact poly construction canister16. Recessed clamps

G

H

F

D

C

E

B

I

JK

LM

N

O

P

Q

Crevice Tool33-0412- 81⁄2-inch high impact plastic- Connects directly to curved plastic wandDusting Brush33-0422- 21⁄2-inch nylon brush- Connects directly to curved plastic wand

33-0410

33-041133-0422

33-0412

Standard Accessories

Replacement Accessories & Parts


Motor - Two stage blower motor for longer life- Self-cooling motor designComponents- Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture - Electrical system is double-protected- 25-foot electrical cord- Electrical cord wrap- Recessed wheels and clamps- Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.97% to 0.3-micron)- Drain outlet- Wet and dry filter (no conversion necessary)Construction - High impact poly construction canister with lifetime canister warranty- Industrial-grade polyolefin wheels with stainless-steel shafts

Miscellaneous - Quiet operation- Stackable design for easy storage- Eliminates airborne particles through exhaust- CSA certified Accessories - each unit includes the following: - 10-foot x 11⁄2-inch crushproof hose- 2-piece aluminum extension wand- 14-inch commercial squeegee tool- 12-inch combination floor tool- 103⁄4-inch crevice tool- 5-inch upholstery tool- Cartridge filter- 1 paper filter bag (replacement bags sold in packs of 10)Warranties

MV-1300-0MEV

Easily the quietest in the industry, the Mi-T-M industrial vacuum has a decibel rating as low as 51.2.Compare that to other vacuums that are rated at 59 decibels or higher.

MV-1800-0MEV

Wet and dry filter

with no conversion

necessary


13 & 18-GallonEasily the quietest in the industry, this high-performance industrial vacuum gives you the power to get the job done

fast and efficient. Popular in the quick-lube industry, the Mi-T-M industrial vacuum is engineered for continuous duty. No filter conversion is necessary allowing you to go directly from wet to dry clean-up. Designed for

professional use, the poly construction canister carries a lifetime warranty.

LIFETIMECANISTERWARRANTY5YEAR

LIMITED

WARRANTYExcludes Normal

Wear I tems


MODEL NUMBER MOTORHORSEPOWER (CONT.) CFM WATERLIFT CAPACITY

WATER RECOVERY AMPS

DECIBEL RATING* DIMENSIONS (LxWxH) SHIP WT. NET WT.

MV-1300-0MEV 120V Two stage bypass 1.6 108 111 in. 13.0 gallons 9.0 gallons 8.6 51.2 22in.x18in.x28in. 50 lb. 38 lb.MV-1800-0MEV 120V Two stage bypass 1.6 108 111 in. 18.0 gallons 13.0 gallons 8.6 51.5 27in.x19in.x31in. 55 lb. 44 lb.

*Most wet/dry vacuums have a decibel rating of 63.4 dB(a).


Standard & Optional AccessoriesExclusive “Hydro” Flow Filter 19-0230

Designed for continuous water pick-up- Will not clog or deteriorate- Retains maximum air flow- Completely washable- Water resistant

99.5% efficient to 1.0-micron- 1.0-micron rating prevents drywall dust from damaging motor- Eliminates airborne particles through exhaust

HEPA FilterHigh Efficiency Particulate Air19-0234

Recommended for fine dust and clean room applications- Will not clog or deteriorate- Retains maximum air flow- Completely washable- Water resistant

99.97% efficient to 0.3-micron- 0.3-micron rating captures solid particulates, not allowing them back into the air

Wall Mount BracketAW-9500-0000Our wall mount bracket kit allows for a permanent work cleaning station. Save space by mounting vacuum to the wall.

1. 25-foot electrical cord2. Electric cord wrap3. Electrical system is double-protected4. Two-stage blower motor for longer life5. Stackable design for easy storage6. Wet and dry cartridge filter (no conversion necessary)7. Disposable paper filter bag (for dry use only)8. 2-piece aluminum extension wand9. 103⁄4-inch crevice tool

GF

DC

E

I

JK

L

M

N

OP

Q

-1.0 Micron

+1.0 Micron

Wet Pick-Up Dry Pick-Up

Hose Adapter Kit852-0156

For when you need extra hose length.

C.

C.C.

C.

A.

B.

D.

D.

Connectsto unit

Connects to wand

Extension Hose

Extension Hose Original Hose

How to attach the hose connection kit:A = Suction Hose (15-0223) sold per footB = Tapered Cuff End (50-0167)C = Inlet Fittings (2 qty.) (50-0169) D = Hose Connector (1 qty.) (50-0168)

R

25-Foot Hose Options VX-0001 Vacuum Accessories with Paper Filter BagsThis option includes: 25-foot of 11⁄2-inch crushproof vacuum hose, 10 disposable paper filter bags (19-0610), crevice tool (33-0326), and suction hand tool (33-0371)

VX-0002 Vacuum Accessories with Cloth Filter BagThis option includes: 25-foot of 11⁄2-inch crushproof vacuum hose, cloth filter bag (19-0611), crevice tool (33-0326), and suction hand tool (33-0371)

VX-0003 Vacuum Accessories with Vacuum Bag LinerThis option includes: 25-foot of 11⁄2-inch crushproof vacuum hose, vacuum bag liner (19-0235), crevice tool (33-0326), and suction hand tool (33-0371)

Note: These options will remove the 2-piece aluminum extension wand (16-0391), combination floor tool (33-0360), commercial squeegee floor tool (33-0359), and the upholstery tool (33-0327) that come standard with the vacuum.

MV-1300-0MEV & MV-1800-0MEV are shown with VX-0001 option

10. 5-inch upholstery tool11. 10-foot x 11⁄2-inch crushproof suction hose12. 12-inch combination floor tool13. 14-inch commercial squeegee tool14. Industrial-grade recessed polyolefin wheels with stainless-steel shafts15. Drain outlet16. Recessed clamps17. High impact poly construction canister

H

B

Standard Accessories

Optional Parts & Accessories


Suction Hoses & FittingsSuction Hose15-0207- 10-foot x 11⁄2-inch crushproof hose with fittingsSuction Hose - Bulk15-0223- 11⁄2-inch crushproof hose without fittings- Sold by the footTapered Cuff End50-0167- Hose fitting - connects hose to wand or to hose connectorHose Connector50-0168- Hose fitting - connects tapered cuff to hose extensionInlet Cuff Fitting50-0169- Hose fitting - connects hose to vacuumHose Adapter Kit852-0156- Includes two inlet cuff fittings and one hose connector

33-0371

FiltersCartridge Filter19-0230- Hydrophobic media for wet and dry use- Completely washable- Filters to 1.0-micronHigh Efficiency Particulate Air (HEPA) Filter19-0234- 99.97% efficient to 0.3-micron- Recommended for fine dust and clean room applications

Aluminum Extension Wand16-0391- 2-piece; friction fit- Chrome-plated

Filter BagsPaper Filter Bag19-0610- 10 per pack- Disposable; for dry use only- Recommended for fine dustsCloth Filter Bag19-0611- Reusable; for dry use only- Machine washable

Vacuum Bag Liner19-0235- Fits inside canister to keep filter cartridge clean (dry use only - do not use with paper filter bag)

Accessory Bag & Hose HangerAW-9500-0001- Fits both 13 & 18-gallon vacuums- Vacuum hose hanger attaches to top handle- Accessory bag holds two-piece wand assembly and standard floor and hand tools- Made from 600-denier vinyl-backed polyester- Easy to clean with soap and water

ToolsCrevice Tool33-0326- 103⁄4-inch high impact plastic- Connects directly to hoseUpholstery Tool33-0327- 5-inch width; serrated edge- High impact plastic- Connects directly to hoseDusting Tool33-0328- 23⁄4-inch nylon brush- High impact plastic- Connects directly to hoseCommercial Squeegee Tool33-0359- 14-inch with replaceable rubber blades- High impact plastic- Connects directly to extension wandReplaceable Rubber Blades (not shown)

33-0397 (Front blade)33-0398 (Back blade)- Fits commercial squeegee floor tool (33-0359)

Combination Floor Tool33-0360- 12-inch with adjustable brush height- High impact plastic- Connects directly to extension wandCommercial Nylon Brush Floor Tool33-0361- 14-inch with nylon brush insert- High impact plastic- Connects directly to extension wandPower Floor Tool33-0362- 103⁄4-inch, air powered, belt drive- High impact plastic- Connects directly to extension wand Suction Hand Tool33-0371- 4-inch high impact plastic- Connects directly to hose

33-035933-0361

33-0360 33-0362

33-0326

33-0327

33-0328


Accessories & Replacement Parts

50-0167

50-0168

50-0169


The Mi-T-M jobsite tool boxes can handle any construction site. Theie heavy-duty solid-steelconstruction offers added protection for your valuable tools and the special locking lid support

locks the lid open for easy access. With a powder-coated finish that offers extreme durability inthe harshest of environments, these boxes are a must have for all serious contractors.

Construction- Reinforced support skids for increased protection and easy transporting- Heavy-duty solid steel construction with full arc welded seams- Full-length concealed hinges are riveted for additional protection and strength- Special powder coated finish for extreme durability- Predrilled skids for easy caster installation- Optional removable tool trays to assist in tool management

Padlocks not included. Mi-T-M recommends No. 5 padlocks.

MB-4822 shown with optional tool tray (MX-22)

MODEL NUMBER CUBIC FEET DIMENSIONS (LxWxH) SHIP WT. NET WT.

MB-3619 6.33 36in.x19in.x16in. 83 lb. 81 lb.MB-4822 13.44 48in.x22in.x22in. 128 lb. 123 lb.MB-4830 25.00 48in.x30in.x30in. 174 lb. 168 lb.MB-6024 21.66 60in.x24in.x26in. 177 lb. 168 lb.

Special tamper-proof armored locking system for protection against break-ins

Convenient swing out handles for additional mobility

Special locking lid support locks lid open to prevent accidental closings

J O B S I T E B O X E S

Heavy-Duty Steel


J O B S I T E B O X E S

Accessories/DimensionsCastersWhen mobility is a must, casters are the solution.- Casters are industrial strength with ball bearing wheels that allow for smooth rolling over rough surfaces- Caster sets include two ridged and two swivels with locksMX-4 (4-inch)- Rated for 700 lb.MX-5 (5-inch)MX-6 (6-inch)- Rated for 800 lb.

Tool TraysHelp sort and organize your jobsite boxes with tool trays and increase your inside storage space, and offers a convenient transportable tray for those jobs that you need only select tools for.MX-19- One tray fits MB-3619- Dimensions: 16.5-in. L x 11-in. W x 3-in. H- 7 lb.MX-22- Two trays fit MB-4822- Dimensions: 19.45-in. L x 11-in. W x 3-in. H- 9 lb.MX-30- Two trays fit MB-4830- Dimensions: 27.5-in. L x 11-in. W x 3-in. H- 12 lb.MX-24- Two trays fit MB-6024- Dimensions: 21.5-in. L x 11-in. W x 3-in. H- 8 lb.

16

3619

18.5

32.5

48

22

22

24.5

44.5

48

30

30

32.5

60.5

60

26

55.5

29

24


P O R T A B L E H E A T E R S

Kerosene Forced Air

MH-0600-0M10

All Models Feature:Frame- Rugged steel body - Extension cord wrap - Powder coated hood and fuel tank Motor- Heavy-duty, high quality cast aluminum enclosed electric motorBurner Head- Clamped hoses - Secured photo cell - 1-piece cast aluminum - Secured fully insulated ignition connection Components- High performance fan - Built-in temperature control thermostat with control dial (Digital temperature read-out on 125 to 215,000 BTU models)- Power switch - Secured internal components - Integral overheat and flame-out safety - Fuel gauge - Integrated fuel pressure gauge (Not available on MH-0400 model) - Oversized fuel cap - High limit temperature shut-off - Sure start ignition for cold temperature starts - Dual connector ignitor Warranty

Important Notes- Not for use in residential living areas or inadequately ventilated areas- Proper ventilation required during operation- Must be plugged into an approved standard electrical outlet for operation

Factory tested for multiple fuels:- Kerosene- JP8/Jet A fuel - No. 1 and No. 2 fuel oil - No. 1 and No. 2 diesel fuel

125,000 to 600,000 BTU Models Feature:Frame- Powder coated steel handles for easy lifting- Roll cage design (MH-0600 model only)- 10-inch pneumatic tires (13-inch tires on MH-0400 & MH-0600 models)- Spare parts storage system (located on back of unit)- Fuel drain plugComponent- Error indicator read-out

For use in workshops, warehouses, garages, construction sites and farms with proper ventilation.

Our kerosene-fired forced air heaters are ideal for commercial, industrial and agricultural applications. Portable and easy to operate, these units extend heat to wide areas creating a comfortable environment even in the harshest conditions.

1YEAR

LIMITEDWARRANTY


MH-0070-0M10

MODEL NUMBER MH-0070-0M10 MH-0125-0M10 MH-0175-0M10 MH-0215-0M10 MH-0400-0M10 MH-0600-0M10HEAT OUTPUT 70,000 BTU 125,000 BTU 175,000 BTU 215,000 BTU 400,000 BTU 600,000 BTUHOT-AIR FLOW 240 CFM 540 CFM 630 CFM 670 CFM 1,400 CFM 3,000 CFMAIR PUMP PRESSURE 4.0 PSI 5.0 PSI 7.5 PSI 9.0 PSI 125 PSI 128 PSIAC POWER 120V, 60Hz, 1.5 Amp 120V, 60Hz, 2.3 Amp 120V, 60Hz, 2.7 Amp 120V, 60Hz, 2.8 Amp 120V, 60Hz, 2.8 Amp 120V, 60Hz, 5.5 AmpMOTOR SIZE 1/8 HP 1/5 HP 1/4 HP 1/3 HP 1/2 HP 5/8 HPFUEL TANK CAPACITY 5.0 gallons 10.0 gallons 13.0 gallons 13.0 gallons 24.0 gallons 40.0 gallonsFUEL CONSUMPTION .53 gal./hr. .95 gal./hr. 1.34 gal./hr. 1.63 gal./hr. 3.05 gal./hr. 4.5 gal./hr.MAX. OPERATING HOURS 9.0 hours 10.0 hours 9.5 hours 8.0 hours 8.0 hours 9.0 hoursHEATING AREA 1,700 sq. ft. 3,100 sq. ft. 4,300 sq. ft. 5,300 sq. ft. 10,000 sq. ft. 15,000 sq. ft. MULTI-FUEL CAPABLE Yes Yes Yes Yes Yes YesDIMENSIONS (LxWxH) 30in.x12in.x15in. 39in.x23in.x26in. 43in.x24in.x26in. 43in.x24in.x26in. 58in.x30in.x25in. 75in.x34in.x43in.SHIP WT. 33 lb. 60 lb. 68 lb. 71 lb. 152 lb. 320 lb.NET WT. 28 lb. 54 lb. 61 lb. 64 lb. 143 lb. 264 lb.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Our hand carry propane forced air heaters feature enclosed gas controls and heavy-duty steel construction. Ready to use - just connect to propane cylinder and plug-in.


Propane Forced Air

MH-0375-LM10

All Models Feature:Frame- Heavy-duty steel construction with steel base- Easy-lift handle for portability at home or on the jobsite- Adjustable height angle (except on MH-0375 model) Heat Output- Variable BTUs (MH-0050-LM10 & MH-0150-LM10) Components- High performance fan - Automatic shut-off if power is interrupted or flame is extinguished- Enclosed gas controls- Electronic ignition- Propane inlet connector - connects heater to propane tank via a supply hose - 10-foot hose and regulator (Not available on MH-0150-NM10)- One-touch ignition and heat control for easy operation

MH-0050 Model Features:Propane- Will operate on 20 lb. cylinder

150,000 to 375,000 BTU Models Feature:Heat Output- Adjustable thermostat (MH-0150-LMT0, MH-0150-NM10 and MH-0375-LM10)Warranty on All Models

For use in workshops, garages, construction sites and farms with proper ventilation.


1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0050-LM10 MH-0150-LM10 MH-0150-LMT0* MH-0150-NM10* MH-0375-LM10*HEAT OUTPUT 50,000 BTU 120-135-150,000 BTU 150,000 BTU 150,000 BTU 375,000 BTUHOT-AIR FLOW 300 CFM 400 CFM 400 CFM 435 CFM 1,500 CFMAC POWER 120V, 60Hz, Less than

1.0 Amp120V, 60Hz, Less than 1.0 Amp

120V, 60Hz, Less than 1.0 Amp

120V, 60Hz, Less than 1.0 Amp

120V, 60Hz, 1.45 Amp

MOTOR SIZE 1/10 HP 1/9 HP 1/9 HP 1/9 HP 1/5 HPFUEL Propane Propane Propane Natural Gas PropaneFUEL CONSUMPTION 2.3 lb./hr. 5.5/6.2/6.9 lb./hr. 6.9 lb./hr. 150 cu. ft./hr. 17.3 lb./hr.REQUIRED CYLINDER SIZE 20 lb. 100 lb. 100 lb. N/A (2) 100 lb.MAX. OPERATING HOURS (PER REQUIRED CYLINDER SIZE)

11.0 hours 18.0 hours 18.0 hours N/A 11.5 hours

HEATING AREA 1,000 sq. ft. 3,800 sq. ft. 3,800 sq. ft. 3,800 sq. ft. 9,000 sq. ft.DIMENSIONS (LxWxH) 18.1in.x7.7in.x12.8in. 25.1in.x9in.x15.5in. 25.1in.x9in.x15.5in. 25.1in.x9in.x15.5in. 34in.x12.6in.x18.5in.SHIP WT. 19 lb. 29 lb. 29 lb. 35 lb. 49 lb.NET WT. 15 lb. 23 lb. 23 lb. 24 lb. 41 lb.

*Models include thermostat.Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

The Job Site Series of indirect heaters are designed for use in ventilated buildings and construction sites for drying and heating large areas. Job Site Series

All Models Feature:Frame- Powder coated steel frame, handle and tank- Heavy-duty tires for easy mobility Burner- Stainless-steel combustion chamber- Direct spark ignitionMotor - Heavy-duty, high quality cast aluminum electric motorComponents- Safety switch prevents overheating- Thermostatically controlled - Suitable for air ducting - Easy to operate controls - High capacity fuel tank- Electronic flame control - Automatic ignition - Water resistant control box - Automatic fuel shut-off Warranty on All Models

MH-0092-0MIH

MH-0092 Additional Features:Components- Rotary pump compressor - Compact design- Thermostat plug

MH-0125 & MH-0300 Additional Features:Frame- Front foot brace - Rugged steel body Components- High thermal efficiency - Control panel with thermostat plug, reset push button and safety air pressure switch - Heated fuel filter for more reliable starts in subzero temperatures- High pressure fuel pump - Vacuum sensor helps prevent heater lock out

For use in construction sites and applications where the heat will be ducted into a building.


Kerosene Indirect Ductable

1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0092-0MIH MH-0125-0MIH MH-0300-0MIHHEAT OUTPUT 92,000 BTU 125,000 BTU 300,000 BTUHOT AIR FLOW 557 CFM 1,180 CFM 2,650 CFMAC POWER 115V, 60Hz, 1Ø, 4.0 Amps 115V, 60Hz, 1Ø, 7.0 Amps 115V, 60Hz, 1Ø, 12.5 AmpsPOWER CONSUMPTION 250 watts 460 watts 800 wattsFAN STATIC PRESSURE 0.5-inch WC 0.7-inch WC 0.8-inch WCFUEL TANK CAPACITY 12.2-gallons 13.5-gallons 36.0-gallonsFUEL CONSUMPTION 0.66 gal./hr. 0.9 gal./hr. 2.1 gal./hr.TEMPERATURE RISE 120°F 130°F 130°FMAX. OUTPUT TEMPERATURE 240°F 240°F 240°FMAX. OPERATING HOURS 18 hours 15 hours 17 hoursDUCT SIZE (LxDIAMETER) 15-feet x 12-inches 25-feet x 12-inches 25-feet x 18-inchesDIMENSIONS (LxWxH) 36.6in.x22.1in.x24.6in. 54.8in.x27.6in.x32.7in. 68in.x29.5in.x40.4in.SHIP WT. 93 lb. 162 lb. 290 lb.NET WT. 88 lb. 154 lb. 282 lb.



68-4001 Thermostat control with 20-foot cord - For light party use All models68-4002 Thermostat control with 20-foot cord - For use on a construction site All models68-4003 Duct adapter - Connects ducting to heater MH-0092-0MIH68-4004 Duct adapter - Connects ducting to heater MH-0125-0MIH68-4005 Duct adapter - Connects ducting to heater MH-0300-0MIH68-4006 15-foot x 12-inch black flexible air ducting - Ducting directs heat MH-0092-0MIH68-4007 25-foot x 12-inch black flexible air ducting - Ducting directs heat MH-0125-0MIH68-4008 25-foot x 18-inch black flexible air ducting - Ducting directs heat MH-0300-0MIH68-4056 Flue extension - Elevates rain cap All models68-4067 Rain cap - Protects flue from moisture when unit is left outside All models


Factory tested for multiple fuels: - Kerosene - No. 1 and No. 2 fuel oil


Propane/Natural Gas DirectionalThe Elite Series directional heaters are available in both propane and natural gas.These ductable heaters are great for large or small area applications and provide

worry-free heating or air circulation for a wide range of applications.

Important Notes- Not for use in residential living areas or inadequately ventilated areas- Proper ventilation required during operation- Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

Outer Casing/Design- Rugged design - Durable powder coated outer casing and side lifting handles- Lifting handles for easy loading and unloading- The unit is naturally balanced to lift easily with handles- Two 10-inch solid rubber tires for mobility and easy placementComponents- Thermostat control with 20-foot cord allows for a consistent and comfortable environment and use in remote locations - 15-foot hose and regulator assembly - Independent fan and burner controls for simple operation- Air flow safety devices - Totally enclosed flame - Fully enclosed electronics - Electronic ignition - Operates as both a fresh air circulator or a heater at the touch of a switch - Super quiet and efficient - Easy to set-up - Numerous duct options available - Direct spark ignitionMiscellaneous- MH-0355 is a dual-fuel heater - propane and natural gas

Warranty

For use in tent and party applications or construction sites.

MH-0355-0MDH

Elite Series

1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0085-0MDH MH-0175-0MDH MH-0355-0MDH*^ MH-0355-CMDH*^#HEAT OUTPUT 85,000 BTU 175,000 BTU 355,000 BTU 320,000 BTUHOT AIR FLOW 750 CFM 1,200 CFM 2,450 CFM 2,450 CFMFUEL Propane Propane Propane / Natural Gas Propane / Natural GasELECTRICAL REQUIREMENTS 115V, 60Hz, 1Ø 115V, 60Hz, 1Ø 115V, 60Hz, 1Ø 115V, 60Hz, 1ØAMPS (STARTING/CONT.) 8.2/2.3 Amps 8.4/3.6 Amps 21/9 Amps 21/9 AmpsFUEL CONSUMPTION 4.25 lb./hr. 8.75 lb./hr. 16.2 lb./hr. / 350 cu. ft./hr. 16.2 lb./hr. / 350 cu. ft./hr.SUGGESTED TANK SIZE 100 lb. 100 lb. 200 lb. 200 lb.INLET GAS PRESSURE 11-inch WC 11-inch WC 11-inch WC-propane /

8.5-inch WC-nat. gas11-inch WC-propane / 8.5-inch WC-nat. gas

TEMP. RISE (ABOVE AMBIENT) 140°F 140°F 190°F-propane / 170°F-natural gas

190°F-propane / 170°F-natural gas

DIMENSIONS (LxWxH) 30in.x16in.x22in. 30.62in.x18.25in.x31.12in. 46in.x32.5in.x42in. 46in.x32.5in.x42in.SHIP WT. 135 lb. 193 lb. 350 lb. 350 lb.NET WT. 122 lb. 164 lb. 317 lb. 317 lb.

*Heater is a dual-fuel model - uses propane or natural gas. #Model available in Canada only.^Natural gas regulator is required to run heater on natural gas, for gas supply pressures between 1/2 and 5 lb. of pressure (Part #68-5009). Available as an accessory.Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.


68-5001 12-inch duct adapter - Connects ducting to heater MH-0085 & MH-017568-5002 Duct diffuser - Distributes heat from ducting MH-0085 & MH-017568-5003 Heat diffuser - Distributes heat from unit MH-017568-5004 Heat diffuser - Distributes heat from unit MH-008568-5005 12-foot x 12-inch white flexible air ducting - Ducting directs heat where you need it; requires 68-5001 MH-0085 & MH-017568-5006 12-foot x 18-inch white flexible air ducting - Ducting directs heat where you need it; requires 68-5007 MH-035568-5007 18-inch duct adapter - Connects ducting to heater MH-035568-5008 Thermostat kit (replacement only) - Adjusts temperature All models68-5009 Natural gas regulator - For gas supply pressures between 1/2 and 5 lbs. of pressure MH-035568-5010 Two cylinder manifold - Connects any two propane cylinders All models68-5012 Duct diffuser - Distributes heat from ducting MH-0355

MH-0080-CM10


Gas-Fired ConvectionThe industrial-duty propane or natural gas convection portable heaters heat quietly and efficiently providing powerful instant heat with no electricity required.

All Models Feature:Frame- Quick assembly 2-piece burn chamber- Durable steel housing- Inner windshield protects burner flame from being extinguished Heat Output- Variable heat settings- 360-degree heat radius for even heating of roomComponents- Matchless piezo spark ignitor for easy lighting - Operates on a standard 100 lb. propane cylinder (Propane models only)- Automatic shut-off if flame is extinguished- 10-foot hose and regulator (Propane models only)Warranty on All Models


MH-0080 Additional Features:Component- Single-handed controls for easy operation

MH-0100 Additional Features:Frame- Stainless-steel burner

For use in workshops, construction sites, farms and loading docks with proper ventilation.

MH-0200-CM10

1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0080-CM10 MH-0100-CM1N MH-0200-CM10HEAT OUTPUT 60-70-80,000 BTU 50-70-100,000 BTU 50-200,000 BTUHOT-AIR FLOW N/A 400 CFM N/AIGNITION TYPE Automatic (integral) Control knob ignition Push-buttonFUEL Propane Natural Gas PropaneFUEL CONSUMPTION 2.3 / 2.8 / 3.7 lb./hr. 2.13 min. / 4.63 max. lb./hr. 4.62 / 9.25 lb./hr.OPERATING TIME (100 LB. CYL.)* L-43 / M-35 / H-27 hrs. N/A L-43 / M-17 / H-10.5 hrs.OPERATING TIME (40 LB. CYL.)* L-17 / M-14 / H-11 hrs. N/A N/AOPERATING TIME (20 LB. CYL.)* L-8 / M-7 hrs. N/A N/ASUGGESTED CYLINDER SIZE 100 lb. N/A 100 lb.INLET GAS PRESSURE N/A 7-in. WC min. / 14-in. WC max. N/AHEATING AREA 1,800 sq. ft. 3,000 sq. ft. 4,600 sq. ft.DIMENSIONS (LxWxH) 15.7in.x15.7in.x21.8in. 15.7in.x15.7in.x26.4in. 16in.x16in.x26.4in.SHIP WT. 17 lb. 21 lb. 20 lb.NET WT. 12 lb. 14 lb. 14 lb.

*Operating times at Low, Medium and High settings.Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Mi-T-M kerosene radiant portable heaters maximize radiant output for natural and soothing warmth.


Kerosene Radiant

MH-0125-2M1R

Motor- Fully enclosed motor for longer life Frame- Compact design- Two tires for easy mobility- Heat safety grille- Easy-lift handle for portability at home or on the jobsiteHeat Output- Adjustable heat height- Clean, quiet, instant radiant heat

Factory tested for multiple fuels:- Kerosene- JP8/Jet A fuel- No. 1 and No. 2 fuel oil - No. 1 and No. 2 diesel fuel

Radiant Heat Output

Components- Ultra quiet fuel pump- Power switch- Electronic controls- Error indicator light- Integral overheat and flame-out safety- Contractor-grade fuel capWarranty

For use in any outdoor application.

Important Notes- Not for use in residential living areas or inadequately ventilated areas- Proper ventilation required during operation

Easy access fuel filter

1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0125-2M1RHEAT OUTPUT 125,000 BTUHEAT FLOW RadiantAC POWER 120V, 60Hz, 3.15 AmpsFUEL TANK CAPACITY 14-gallonsFUEL TANK CONSUMPTION .9 gal./hr.MAX. OPERATING HOURS 20 hrs.HEATING AREA 3,125 sq. ft.DIMENSIONS (LxWxH) 28.4in.x28.7in.x40.9in.SHIP WT. 85 lb.NET WT. 73 lb.


For convenient, versatile radiant heat, these propane tank-top heaters are great for outdoor use. Just connect to a standard 20 pound propane cylinder for up to 48 hours of heating.

Frame- Heavy-duty construction- Cast aluminum manifold- Rust-proof chrome emitter guard- Rear burner safety guard- Swivel burner head (MH-0030 only)Heat Output- Variable heat control valve- Clean, quiet, instant radiant heat

Important Notes- Not for use in residential living areas or inadequately ventilated areas- Proper ventilation required during operation

Components- Hand wheel connection for valve- Standard propane tank connection- Safety shut-off valve- High efficiency heat reflector- Heat regulator knobWarranty

For use in open workshops, construction sites, farms and for any other outdoor heating need.

Propane tank not included

MH-0015-IM10

MH-0030-IM10


Propane Tank-Top Radiant

1YEAR

LIMITEDWARRANTY


MODEL NUMBER MH-0015-IM10 MH-0030-IM10HEAT OUTPUT (SINGLE BURNER)* L-9,000 / M-12,000 / H-16,000 BTU L-9,000 / M-12,000 / H-16,000 BTUHEAT OUTPUT (DOUBLE BURNER)* N/A L-18,000 / M-24,000 / H-32,000 BTUIGNITION TYPE Match light Match lightHEAT SETTINGS 3 6PROPANE CYLINDER SIZE 20 lb. 20 lb.MAX. OPERATING HOURS (20 LB. CYL.)* L-48 / M-36 / H-27 hrs. L-48 / M-18 / H-14 hrs.DIMENSIONS (LxWxH) 8.4in.x7.4in.x12in. 17.5in.x5.5in.x12in.SHIP WT. 3 lb. 6 lb.NET WT. 2 lb. 5 lb.

*Heat output and operating hours are at Low, Medium and High settings.Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.


Propane Radiant Outdoor Patio Heater

Frame- Heavy-duty stainless-steel emitter screen- Stainless-steel finish- Rust resistant reflector material- 5-piece reflector assembly- Easy slide cylinder compartment cover- Large diameter support post- 18-inch base diameter- Wheel kit allows for easy portabilityHeat Output- Variable heat settings- 360-degree heat radius for even heatingComponents- Wind resistant burner system prevents flame from being extinguished and has automatic shut-off if flame is extinguished- Built-in safety tip-over switch- Hose and regulator standard- Single-handed ignition controls- Piezo spark push-button ignitionWarranty

For use on residential or commercial outdoor patios and decks.

MH-0040-PM10


Just about every climate could use a Mi-T-M portable patio heater for cool evenings or chilly days.Sleek and attractive, this model provides up to a 210 square foot radius of heat on a patio or deck

and is sure to keep your guests warm.

1YEAR

LIMITEDWARRANTY


The design of the wheel kit may change after the publication of this catalog.

MODEL NUMBER MH-0040-PM10HEAT OUTPUT* L-22,500 / H-40,000 BTUFUEL PropaneFUEL CONSUMPTION 1.85 lb./hr.MANIFOLD PRESSURE 11-inch WCOPERATING TIME (20 LB. CYL.) 10.8 hrs.SUGGESTED CYLINDER SIZE 20 lb.HEATING AREA 210 sq. ft.DIMENSIONS (LxWxH) 32.3in.x32.3in.x88in.SHIP WT. 68 lb.NET WT. 59 lb.

*Heat output is at Low and High settings.Specifications subject to change without notice. Use in accordance with anyand all state or local codes, regulations and/or ordinances.Please see heater "Owner's Manual" included with each heater for a completelist of important safety information. These specifications are estimates only.

Can Mi-T-M heaters be used indoors?Fuel burning portable heaters are intended to be used in a well ventilated area. Please refer to your operator’s manual for the fresh air requirements.

How do I size a portable heater?The most important factor when sizing a portable heater is the amount of space you have to heat. A general rule of thumb is that you can heat approximately 25 square feet for every 1000 BTUs a heater puts out.

What type of heater is better, one that runs on Fuel Oil or LP?All of the approved fuels for Mi-T-M portable heaters have great energy value and one doesn’t stand out over another. Your application and the fuel that you have available are going to determine which fuel to use.

What types of fuels are approved for Oil Fired Mi-T-M portable heaters?The approved fuels are: No. 1 and No. 2 fuel oilNo. 1 and No. 2 diesel fuelJP8/Jet A fuel

Do all portable heaters require electricity?Mi-T-M portable heaters that have a blower motor or a fuel pump will require electricity to power them. All Kerosene forced air, LP and Natural Gas forced air and radiant heaters require electricity. The convection heater, outdoor patio heater and the tank top heaters do not require electricity.


How To Choose


Mi-T-M builds safe and reliable products. In the United States, the UL, CSA International and ETL are accredited by the Occupational Health and Safety Administration (OSHA), as a Nationally Recognized Testing Laboratory (NRTL). Generally speaking, all OSHA accredited laboratories conduct their tests against the same set of US standards and codes, regardless of who authors or publishes them. Having undergone detailed scrutiny of our technical competence, integrity and certification testing facility, Mi-T-M is authorized by CSA to perform much of the product certification work in-house with NRTL audits to guarantee credibility. The mark of CSA, ETL or UL on a Mi-T-M product is an added assurance of safety.

Manuf

actu

red

ToCl

eani

ngEquipment Trade Association

Performance

Standards

Cleaning Equipment Trade Association

PerformanceCertified

TM

CSA Group - the Canadian Standards Association - for standards development, information products, sale of publications, training and membership services.

CSA International - for product testing and certification; also test to applicable US standards, which include ANSI, UL, CSA, NSF and others.

QMI - for management systems registration. CSA marks appear on over one million products worldwide.

Intertek's ETL Semko division has been the global leader in the testing, inspection and certification of products for over 100 years, dating back to Thomas Edison's Electrical Testing Laboratories (ETL). The ETL listed mark is the legal equivalent of the UL-listed and CSA-listed marks, designated by OSHA and the Standards Council of Canada. When Mi-T-M products bear Intertek's proprietary ETL-listed mark, the letters ETL will carry with them a long history of innovation, influence and independence.

UL, "Underwriters Laboratories Inc.", the trusted source across the globe for product compliance. UL has tested products for public safety for more than a century. UL offers one of the conformity assessment industry's broadest portfolios of capabilities and certification marks. Their unique mix of local expertise in global markets and deep industry knowledge helps bring safer products to market.

Mi-T-M Corporation's pressure washers have received certification from CETA under the CETA Performance Certification Standard. This standard clearly defines performance criteria and test procedures for certification of hot and cold water pressure washers. CETA certification guarantees the buyer that products are designed, built and tested to rigid performance standards. Machines must operate within +/-5% of advertised performance rating. Data for all Performance Certified models are on file at CETA headquarters, and periodic peer reviews ensure constant quality.

The International Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication and inspection of boilers and pressure vessels, and nuclear power plant components during construction. In the formulation of its rules and in the establishment of maximum design and operating pressures, the Committee considers technological advances including materials, construction, methods of fabrication, inspection, certification, and overpressure protection.

The objective of the rules is to provide a margin of deterioration in service. Advancements in design and material and the evidence of experience are constantly being added by Addenda.

Originating in 1914, the ASME Boiler and Pressure Vessel Code is now adopted in part or in its entirety, by 49 states and numerous municipalities and territories of the United States and all the provinces of Canada.

CSA International is the principal product testing, certification and standards development organization serving the gas industry in the US and Canada.

They are the number one source for gas product approvals in North America and the only organization that issues the familiar Blue Star mark for the US and Blue Flame mark for Canada.

CSA International is uniquely qualified to test and certify that gas appliances and accessories meet applicable US standards. Since 1925, the Blue Star approval mark has been the mark of choice for gas-fired appliances and accessories in the US. We test products for conformance with all applicable ANSI and CSA gas standards. CSA marked products are used and sold in the US everyday.

The Warnock Hersey Mark (WH) is North Americas leading product safety and performance mark for building and construction products. Products bearing the WH Mark indicate compliance to relevant building codes, association criteria, and product safety and performance standards.

The WH Mark can be found on more than 6,500 products ranging from fire doors and builders hardware to hearth, plumbing and construction products. Having Intertek's WH Mark on your product reflects your commitment to product safety, performance and quality to inspectors, builders and end users. The mark also signifies that the products manufacturing site(s) undergo periodic follow-up inspections to ensure ongoing compliance of the originally certified product.

Safety & Product Certifications


Ordering InformationExtended HoursTo serve you better, our customer service hours of operation are:Monday - Friday 7:30 am to 5:30 pm CSTProducts may be ordered or inquires sent 24 hours a day, 7 days a week via fax or e-mail.

How To OrderUnits and accessories are ordered through authorized Mi-T-M dealers and distributors.- Be prepared to advise the Mi-T-M Customer Service Representative of your Mi-T-M account number, model numbers, parts, and descriptions.- Indicate your purchase order number and full name on order.- Specify exact shipping instructions.- With fax and/or mail-in orders, give full name, Mi-T-M account number, zip code, and telephone number.Phone Fax Mail Internet E-mail563-556-7484 563-556-1235 Mi-T-M Corporation www.mitm.com [email protected] 8650 Enterprise Drive Peosta, IA 52068

Internet – www.mitm.comOur website may be instantly accessed and offers:- 4-color viewing of products and specifications - Company profile including Who's Who of Mi-T-M- A site search to find the equipment that's right for you - A listing of service centers throughout the country- How-To Videos - Quick e-mail access for questions and information requests about specific models or product lines- Mi-T-M on-line parts ordering and access to parts listings for the full Mi-T-M product lines

Sales PolicyProducts are sold through authorized Mi-T-M dealers, National Accounts and OEMs as recognized by Mi-T-M. All new customers must complete a credit application. Mi-T-M will perform a credit check and upon approval, the customer will receive an account number and a line of credit.

Production ScheduleCustomers can anticipate a lead time of one week for cold water pressure washers, air compressors, air compressor/generators, air compressor/generator/welders, portable generators, portable heaters, jobsite boxes, and wet/dry vacuums; a two week lead time for hot water pressure washers. Special units will require additional lead time.

ShippingOrders shipped without specific shipping instructions are shipped "best way" as determined by Mi-T-M shipping department. Mi-T-M assumes no responsibility and makes no guarantees regarding air freight deliveries. Please allow seven working days before requesting tracking on lost or late shipments. In an effort to deliver Mi-T-M products to our customers in a timely manner, Mi-T-M developed a program where whole goods (pressure washers, air compressors, air compressor/generators, air compressor/generator/welders, portable generators, portable heaters, jobsite boxes, and wet/dry vacuums) and parts are shipped from separate locations in our facility. Our freight policy has not changed. Our customers are still responsible for outgoing freight on parts and whole goods. This may be altered by any minimum qualifying freight programs. Because our goal is to process all orders as soon as we receive them, our system will no longer allow additional items to be added to a previously processed order. Any additional orders will be handled as a new order.

Freight Terms- All water treatment systems and parts – F.O.B. Peosta - Any combination of pressure washers, air compressors, air compressor/generators, air compressor/generator/welders, portable generators, portable heaters, or wet/dry vacuums – may qualify for prepaid freight- Jobsite boxes – prepaid on 1,000 lbs. or more - Detergents – prepaid on twelve cases- Parts – prepaid and add - Trailer units – prepaid and add

WarrantyAll warranty claims and returns of goods for repair shall be governed by the express terms of the Mi-T-M warranty, as provided in the conditions of our warranty, and limited to the replacement of defective parts, as provided in the conditions of the Mi-T-M warranty. To submit an electronic warranty claim go to www.mitm.com and click on the Warranty Claims link below the Advanced Product Search box on the home page.

Merchandise ReturnMi-T-M must be contacted before any product can be returned. The customer will receive a Returned Goods Authorization (RGA) number prior to the item being returned. Mi-T-M reserves the right to refuse returned products. Products must be in new and resalable condition. Products must be current production components. All products must be returned freight prepaid at shippers expense. Products returned C.O.D. for any reason will be refused. Credit not to exceed original purchase price will be issued on returned products approved for return subject to a 20% restocking fee.

Submission of ClaimsAll damages to merchandise – either internal or external – must be reported to the carrier shipping such merchandise, to permit an inspection report to be filed immediately. Claims of shortage of cartons, crates or boxes must be properly submitted to the carrier; claims for errors or shortages of contents must be submitted to Mi-T-M within 24 hours after delivery of such merchandise.

In a continued commitment to improve quality, Mi-T-M reserves the right to make component or design changes when necessary.Note: PSI or GPM may vary + or - 5% from specifications due to variances allowed by component suppliers.


Thank You To Our SuppliersThe Mi-T-M name stands for performance, quality, value and dependability and our suppliers play a majorrole in our continued success story. We thank you for your commitment to providing the highest qualitycomponents in our industry.

Schieffer is a major producer of flexible hose systems in the industrial and consumer pressure washer industry. Because of

our advanced technologies and connecting techniques, we have become the choice of major OEM customers.

Suttner, the leading manufacturer of pressure washer parts, has been producing German engineered connectors, guns, wands, tips, and attachments for 40 years. Manufactured for top performance,

Suttner components are a valuable addition to keep yourcustomer’s equipment up and running, year in and year out.

Suttner America Company provides timely shipping throughout North America from our fully stocked warehouse.

FLEXIBLE HOSE SYSTEMS

Honda Engines have long been recognized as the industry leader in providing reliable, easy-starting and fuel-efficient small engines.

You’ll find Honda GX Series engines on a wide variety of rental, construction and premium power equipment.

AR, recognized worldwide as the leading manufacturer oftriplex plunger pumps, is renowned for their high level of quality,

consistency and flexibility. Distinctions in technological design and methods have contributed to leading the industry standards of

today. Innovative and effective advancements in pump design are attributed to AR.

General Pump offers the highest standard of customer service, pumps, components and technology available in the industry.

GP is dedicated to exceeding the needs of the pressure washer industry today and in the future.

Subaru Robin's advanced technology, chain driven OHC engines, provide easier starting, lower noise and more power to givemaximum performance on your Mi-T-M pressure washer,

air compressor and generator.

Since 1854 CURTIS-TOLEDO, Inc. has been designing andmanufacturing solutions for industry. The FSCURTIS Air

Compressors brand continues to be the symbol of quality and excellence in the design and manufacture of reciprocating air

compressors, rotary-screw compressors and oil free compressors.

Since its inception in 2005, Pinnacle Products International has established itself as the go-to supplier for high quality, high

value portable industrial comfort products and offersunparalleled quality and value in portable construction heaters

and ventilation products.

With over 90 years of engine innovation, Kohler Engines has earned a reputation for quality and performance. Their extensive

product range of 3.5 HP to 64 HP, air-cooled or liquid-cooled,diesel or gas engines have global support with 13,000+

distribution and service centers. Kohler Engines - PowerfulTradition, Advanced Innovation, Global Support.

Control Devices is a leading manufacturer of high quality valves serving the compressed air, pressure washer, automotive, fluid power, fire protection, specialty gas and pneumatic industries.We offer a line of standard products that has grown over the

years, but pride ourselves in our ability to design and manufacture valves for custom applications.

controldevices, LLC

RATO Engine, a Division of Chongqing RATO Power Co., Ltd., was established in 2007 to meet the growing demands of high

technology requirements in current general-purpose machinery market. RATO products have been exported to 80 countries and

regions including America, Germany, France, Spain, Mexico,Argentina, Turkey, and Nigeria, winning high international praise.


Our PromiseWe promise to deliver unmatched performance - from the quality of our products to the dedication of each employee who does what's right for our customer - every time.

Front Row (left to right): Laura Runde, Customer Service Manager - Chad Wilwert, Customer Service Representative (CSR)Row 2: Jake Trierweiler, CSR - Karen Steger, Receptionist - TJ Leicht, CSR - Brad Klein, CSRRow 3: Paul Pettinger, CSR - Susie Cornwell, Administrative Assistant - JJ Connolly, CSR -Mike Gassman, CSR - Jeff Kifer, CSR

Customer Service Department

Front row (left to right):Kevin Anstoetter, Rental Division Manager - Scott Strohmeyer, Assistant Water Treatment Division ManagerRow 2: Vaughn Grimm, Governmental Division Manager - Matt Hoefer, Equipment Division Manager - Bill Murray, OEM Division Manager - Tim Ernst, Mi-T-M Outdoor Division ManagerRow 3: Pat White, Sales Operation Manager - Becky Kremer, Sales Administration Manager - Don Holdridge, National Paint Division Manager - Aaron Auger, Water Treatment Division Manager - Karl Loeffelholz, Distributor Division Manager - Jeff Schlichte, Paint Division Manager Row 4: Bryan McCarron, Air Compressor Division Manager - Ron Snyder, Assistant Distributor Division ManagerNot Pictured: Dennis Waller, Consumer Division Manager - Gerry Hess, Project Manager, OEM Division

Sales Department

Front row (left to right):Bill Naber, Water Treatment Technical Service Manager - Scott Schiffer, Technical Service Assistant Row 2: Kevin Gassmann, Technical Service Assistant - Steve Cleary, Technical Service Manager

Technical Service Department

Left to right:Karen Anderson, Marketing Manager - Teresa Gottschalk, Graphic Designer - Kelly Rice, Literature Coordinator - Jessica Primrose, Marketing Project Manager - Julie Schueller, Graphic Designer

Marketing Department


Documents

2013 Mi-T-M Industrial Brochure