2013-Huawei Certification-Exam Outline (Partner) V2 2

5/19/2018 2013-Huawei Certification-Exam Outline (Partner) V2 2

1/126

Huawei Certification Exam Outline (Partner)

COMMERCIAL IN CONFIDENCE 1

Huawei Certification Exam Outline(For Partner)

HUAWEI Learning Service

2013


2/126


1

Contents

1 Fixed Network ............................................................................. .............................................................. . 4

1.1 Datacom Technology Certification Exam (Carrier) Outline .............................................................. ........... 4

1.1.1 Introduction of Datacom Technology Certification Exam ....................................................... ........... 4

1.1.2 Huawei Certified Datacom Associate Huawei Networking Technology and Device

(HCDA-HNTD) Exam Outline ................................................................ ..................................................... 5

1.1.3 Huawei Certified Datacom ProfessionalBuilding Carrier Access Network (HCDP-BCAN) Exam

Outline 7

1.1.4 Huawei Certified Datacom Professional - Building Carrier Routing Network (HCDP-BCRN) Exam

Outline 9

1.1.5 Huawei Certified Datacom Professional-Building IP Telecom Network (HCDP-BITN) Exam Outline12

1.1.6 Huawei Certified Internetwork Expert Improve Carrier Network Performance (HCIE Carrier) Exam

Outline 14

1.2Access Network Exam Outline ............................................................... .................................................. 18

1.2.1 Introduction of Access Network Exam .............................. ............................................................. 18

1.2.2 Huawei Certified Network Associate- Access Network Exam Outline ............................................ 18

1.2.3 Huawei Certified Network Professional- Access Network Exam Outline ........................................ 20

1.3 Optical Network Exam Outline ................................................................ .................................................. 23

1.3.1 Introduction of Optical Network Exam ............................................................. ............................... 23

1.3.2 Huawei Certified Network Associate-Optical Network Exam Outline ............................................. 23

1.3.3 Huawei Certified Network Professional-Optical Network Exam Outline ......................................... 25

1.4 Microwave Product Exam Outline ............................................... ............................................................. 28

1.4.1 Introduction of Microwave Product Exam ......................... ............................................................. 281.4.2 Huawei Certified Network Associate-Microwave Product Exam Outline ........................................ 28

1.4.3 Huawei Certified Network Professional-Microwave Product Exam Outline .................................... 29

2 Core Network .............................................................................. ............................................................. 32

2.1 Mobile Soft Switch Exam Outline ................................................ ............................................................. 32

2.1.1 Introduction of Mobile Soft Switch Exam Outline ........................................................................... 32

2.1.2 Huawei Certified Network Associate- Mobile Soft Switch Exam Outline ........................................ 32

2.1.3 Huawei Certified Network Professional - Mobile Soft Switch Exam Outline ................................... 34

2.2 NGN Exam Outline ............................................................................................ ....................................... 36

2.2.1 Introduction of NGN Exam Outline .......................................................... ....................................... 36

2.2.2 Huawei Certified Network Associate-NGN Exam Outline ....................... ....................................... 362.2.3 Huawei Certified Network Professional-NGN Exam Outline .......................................................... 38

2.3 MGW&SBC Exam Outline .................................................................................................... .................... 41

2.3.1 Introduction of MGW&SBC Exam Outline ....................................................... ............................... 41

2.3.2 Huawei Certified Network Associate- MGW&SBC Exam Outline............................... .................... 41

2.4 USC Exam Outline ...................................................................... ............................................................. 43

2.4.1 Introduction of USC Exam Outline ................................................................................................. 43

2.4.2 Huawei Certified Network Associate-USC Exam Outline ...................................................... ......... 43

2.4.3 Huawei Certified Network Professional -USC Exam Outline ......................................................... 46

2.5 SG Exam Outline .............................................................. ............................................................... ......... 49

2.5.1 Introduction of SG Exam Outline ............................................................ ....................................... 492.5.2 Huawei Certified Network Associate-SG Exam Outline ................................................................. 49


3/126


2

2.5.3 Huawei Certified Network Professional-SG Exam Outline ............................................................. 50

3 Wireless ....................................................... .............................................................. ............................... 52

3.1 GSM Exam Outline .................................................................................................... ............................... 52

3.1.1 Introduction of GSM Exam Outline ............. ............................................................... .................... 52

3.1.2 Huawei Certified Network Associate-GSM Exam Outline ....................... ....................................... 52

3.1.3 Huawei Certified Network Professional-GSM Exam Outline .......................................................... 54

3.2 WCDMA Exam Outline ................................ .............................................................. ............................... 57

3.2.1 Introduction of WCDMA Exam Outline ............................................................ ............................... 57

3.2.2 Huawei Certified Network Associate-WCDMA Exam Outline ......................................................... 57

3.2.3 Huawei Certified Network Professional-WCDMA Exam Outline .......... .......................................... 59

3.3 CDMA Exam Outline......................... ................................................................. ....................................... 62

3.3.1 Introduction of CDMA Exam Outline ............................................ .................................................. 62

3.3.2 Huawei Certified Network Associate-CDMA Exam Outline ............................................................ 62

3.3.3 Huawei Certified Network Professional-CDMA Exam Outline ........................................................ 64

3.4 Wimax Exam Outline ......................................................................................... ....................................... 68

3.4.1 Introduction of Wimax Exam Outline ................................................................ .............................. 68

3.4.2 Huawei Certified Network Professional-Wimax Exam Outline ....................................................... 68

3.5 LTE Certification Exam Outline ............................................................... .................................................. 70

3.5.1 Introduction of LTE Certification ..................................................................................................... 70

3.5.2 Huawei Certified Network Associate LTE (HCNA-LTE) Exam Outline ....................................... 70

3.5.3 Huawei Certified Network Professional LTE (HCNP-LTE) Exam Outline .................................. 72

3.5.4 Huawei Certified Network Professional EPC (HCNP-EPC) Exam Outline ................................ 76

4 RNP&RNO ..................................................................................................... .......................................... 79

4.1 GSM RNP&RNO Exam Outline ..................................................................................................... ........... 79

4.1.1 Introduction of GSM RNP&RNO Exam Outline.................................... .......................................... 79

4.1.2 Huawei Certified Network Associate-GSM RNP&RNO Exam Outline ........................................... 79

4.1.3 Huawei Certified Network Professional-GSM RNP&RNO Exam Outline ....................................... 80

4.2 WCDMA RNP&RNO Exam Outline ................................................................ .......................................... 83

4.2.1 Introduction of WCDMA RNP&RNO Exam Outline ........................................................................ 83

4.2.2 Huawei Certified Network Associate-WCDMA RNP&RNO Exam Outline ...................................... 83

4.2.3 Huawei Certified Network Professional-WCDMA RNP&RNO Exam Outline ................................. 84

4.3 CDMA RNP&RNO Exam Outline ................................................................................................... ........... 87

4.3.1 Introduction of CDMA RNP&RNO Exam Outline ......................... .................................................. 87

4.3.2 Huawei Certified Network Associate-CDMA RNP&RNO Exam Outline ..................... .................... 87

4.3.3 Huawei Certified Network Professional-CDMA RNP&RNO Exam Outline ..................................... 88

4.4 Microwave RNP Exam Outline .................................................... ............................................................. 91

4.4.1 Introduction of RNP Exam Outline ................................................................................................. 91

4.4.2 Huawei Certified Network Associate-Microwave RNP Exam Outline ............................................. 91

4.4.3 Huawei Certified Network Professional-Microwave RNP Exam Outline ........................................ 92

5 Energy&Infrastructure....................................................... ............................................................... ......... 95

5.1 Site and Power Exam Outline ................................................................ ................................................... 95

5.1.1 Introduction of Site and Power Exam Outline ...................................... .......................................... 95

5.1.2 Huawei Certified Network Associate-Site and Power Exam Outline .............................................. 95

5.2 Hybrid Power Supply Exam Outline.................................. .............................................................. .......... 97

5.2.1 Introduction of Hybrid Power Supply Exam Outline ....................................................................... 97


4/126


3

5.2.2 Huawei Certified Network Associate-Hybrid Power Supply Exam Outline ..................................... 97

6 Cloud ........................................................... .............................................................. ............................... 99

6.1 Cloud Computing Certification Exam Outline ................... ............................................................... ......... 99

6.1.1 Introduction of Cloud Computing Certification..................................................................... ........... 99

6.1.2 Huawei Certified Network Associate-Huawei Cloud Technologies and Device (HCNA-HCTD) Exam

Outline 99

7 Telecom Design and Implementation................................ ............................................................... ....... 102

7.1 Telecom Survey and Design Exam Outline ........... ............................................................... .................. 102

7.1.1 Introduction of Telecom Survey and Design Exam Outline .......................................................... 102

7.1.2 Huawei Certified Network Associate-Telecom Survey and Design Exam Outline ........................ 102

7.2 Hardware Installation Supervision (excluding RF products) ................................................................... 104

7.2.1 Introduction of Enterprise Communiation Exam Outline ............................................ .................. 104

7.2.2 Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products)104

7.3 Huawei Certified Network Professional -Hardware Installation Supervision (including RF products) ..... 107

7.3.1 Introduction of Enterprise Communiation Exam Outline ............................................ .................. 107

7.3.2 Huawei Certified Network Professional-Hardware Installation Supervision (including RF products)107

7.4 Huawei Certified-ODN Design Exam Outline ...................................... ................................................... 109

7.4.1 ODN Design Certification Exam Introduction ............................................................................... 109

7.4.2 ODN Design Exam Outline .......................................................... ................................................ 109

7.5 Huawei Certified-ODN Implementation Exam Outline ............................................................................ 111

7.5.1 ODN Implementation Certification Exam Introduction ........................................................... ....... 111

7.5.2 ODN Implementation Exam Outline ........................................................ ..................................... 112

7.6 Huawei Certified-OSP Design Exam Outline .......................................................................................... 114

7.6.1 OSP Design Exam Introduction ................................................... ................................................ 114

7.6.2 OSP Design Exam Exam Outline ..................................... ........................................................... 114

7.7 Huawei Certified-OSP Implementation Exam Outline ........................................................... .................. 116

7.7.1 OSP Implementation Exam Introduction ...................................................................................... 116

7.7.2 OSP Implementation Exam Outline ............................................. ................................................ 117

7.8 Huawei Certified-Site Civil Work Implementation Exam Outline ...................................................... ....... 119

7.8.1 Site Civil Work Implementation Exam Introduction .................................................... .................. 119

7.8.2 Site Civil Work Implementation Exam Outline ............................................................ .................. 119

7.9 Huawei Certified-Site Design Exam Outline .............................................................. ............................. 120

7.9.1 Site Design Certification Exam Introduction ............................................................... .................. 120

7.9.2 Site Design Exam Outline ............................................................ ................................................ 121

8 Service Delivery flow and Skill ................................................................ ................................................ 123

8.1 Maintenance flow and Skill(for MS area Manager and Field Maintenance Leader) ................................ 123

8.1.1 HCNA- Maintenance flow and Skill subcontractor test .......................................................... ....... 123

8.1.2 HCNA- Maintenance flow and Skill Exam Outline...................................................... .................. 123

8.2 Training flow and Skill ....................................................... ............................................................... ....... 124

8.2.1 HCNA- Maintenance flow and Skill subcontractor test introduction ............................................. 124

8.2.2 HCNA- Maintenance flow and Skill Exam Outline...................................................... .................. 124


5/126


4

1 Fixed Network

1.1 Datacom Technology Certification Exam (Carrier)

Outline

1.1.1 Introduction of Datacom Technology Certification Exam

Certificate Exam Name Exam Code Exam NameExam

DurationItem number

TotalScore

PassScore

HuaweiCertifiedDatacom

Associate

HCDA

HNTDHC-211-ENU/HC-031-211-ENU

HCDA-HNTD(Huawei CertifiedDatacom Associate

Huawei

NetworkingTechnology andDevice)

90 min

60multiple-choicequestions(single-answerandmultiple-answer),true-false

questions

1000 600

HuaweiCertifiedDatacom

Professional -Carrier

HCDP-BCAN HC-121-ENU/HC-031-121-ENU

HCDP-BCAN(Huawei CertifiedDatacom Professional

Building Carrier

Access Network)

90 min

60multiple-choicequestions(single-answerandmultiple-answer),true-falsequestions

1000 600

HCDP-BCRN HC-122-ENU/HC-031-122-ENU

HCDP-BCRN(Huawei CertifiedDatacom Professional- Building CarrierRouting Network)

90 min


1000 600

HCDP-BITN HC-123-ENU/HC-031-123-ENU

HCDP-BITN(Huawei CertifiedDatacomProfessional-BuildingIP Telecom Network)

90 min


1000 600

HuaweiCertified

InternetworkExpert - Carrier

HCIE-Carrier HC-031-161-ENU

HCIE (HuaweiCertified InternetworkExpert ImproveCarrier NetworkPerformance ) Exam

90 min


1000 600

HCIE Carrier

Lab Exam --

Huawei Certified

Internetwork Expert -Lab Exam

480

minutes -- -- --


6/126


5

1.1.2 Huawei Certified Datacom Associate Huawei

Networking Technology and Device (HCDA-HNTD) Exam

Outline

1.1.2.1 Prerequisites

No prerequisites.

1.1.2.2 Exam Content Overview

The HCDA-HNTD exam covers datacom basics, TCP/IP protocol stack basics, WAN

protocol principles such as Frame Relay and PPP and their implementation in Huaweirouters, Ethernet technology, STP, and VLAN principles and their implementation in Huawei

switches, basic principles of routing protocols such as RIP and OSPF and their

implementation in Huawei routers, and network security technologies and their

implementation in Huawei firewalls.

1.1.2.3 Exam results valid period

This exam result is valid for 3 years.

1.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:

Certificate Re-certification Methods

Huawei CertifiedDatacom Associate

To re-certify, pass ONE of the following before the certification expiration date: Pass any subject of the same level of certification in the field of the local

technology Pass any subject of the high-level certification in the field of the local

technology

1.1.2.5 Key Points of Exam

IP Network Basics

1. Datacom basics

2. Basic network concepts, IP network architecture, standardization organizations and

protocols

3. OSI and TCP/IP protocol models, functions at each layer, and packet encapsulation

4. ARP and RARP principles

5. TCP/UDP principles

6. IPv4 subnetting

7. Principles of common application layer protocols

8. Principles and application of common tools such as Ping, Tracert, FTP, and Telnet


7/126


6

LAN Technologies

1. Basic principles of the Ethernet technology and switches

2. Basic principles of VLAN, STP, and VRRP and their implementation in VRP

3. How a small switching network is constructed by using VLAN, STP, and VRRP

technologies and Huawei switches

WAN Technologies

1. HDLC, PPP, and Frame Relay and their implementation in Huawei products

Routing Technologies

1. Static routing protocol principles, RIP principles, and OSPF principles, and their

implementation in VRP

2. How a small routing network is constructed by using routing technologies and Huawei

routers

Network Security

1. Firewall functions, types, and working principles

2. ACL and NAT principles and configuration of ACL and NAT in Huawei firewalls

3. How network security is ensured by using network security technologies and firewalls

Product Knowledge

1. VRP features, operations, and maintenance

2. Features of Huawei routers and switches and their implementation in IP networks

The exam content provided here serves only as a general guide to candidates. Other contents notmentioned here may also be included in the actual exam.

1.1.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the

nearest test center to take the exam.

To find the Pearosn VUE authorized test centers. , please log on the homepage of the

Pearson VUE :

http://www.vue.com/vtclocator/

1.1.2.7 References

Huawei Certified Datacom Training Courses HCDA: Huawei Network Technology and

Device (HNTD)

Huawei Certified Datacom Training Courses HCDA: Guide to Experiments on Huawei

Network Technology and Device (HNTD)

VRP Configuration Guide
http://www.vue.com/vtclocator/http://www.vue.com/vtclocator/


8/126


7

Huawei product manuals

1.1.2.8 Recommended Training Program

BOM Training Program Level Duration

88980225HCDA-HNTD (Huawei Certified Datacom Associate-Huawei Networking

Technologies and Device) TrainingII 8

1.1.3 Huawei Certified Datacom ProfessionalBuilding Carrier

Access Network (HCDP-BCAN) Exam Outline


No prerequisites.


The HCDP-BCAN exam covers the Ethernet and Ethernet HA technology, VLAN

technology, QinQ technology, STP/RSTP/MSTP technologies, PPP and PPPoE access

technologies, AAA technology, Huawei switches, and broadband access servers.






Huawei CertifiedDatacom

Professional-Carrier



technology


Ethernet Technology

1. Ethernet evolution process, port auto-negotiation technology, port trunking, port

mirroring, working principles of a Layer 2 switch, and working principles of a Layer 3

switch

VLAN

1. 802.1Q encapsulation, implementation of VLAN in Huawei products2. Inter-VLAN route and Super VLAN


9/126


8

3. QinQ principles, configuration, and implementation

STP/RSTP/MSTP

1. STP principles and configuration

2. RSTP principles and configuration

3. MSTP principles and configuration

Huawei Switches

1. Hardware structure and working principles of Huawei switches

2. VRP software features of Huawei switches

Huawei ME60-X Series Broadband Access Servers

1. ME60-X series products hardware structure and working principle

2. ME60-X series products VRP software feature

Basic Access and Authentication Techniques

1. IPoE, IPoEoVLAN, IPoEoA, and static user access principles and their implementation

in Huawei BRAS; Web authentication, fast authentication, and binding authentication

principles and their implementation in the MA5200G

2. PPPoE, PPPoEoVLAN, PPPoEoA, and PPPoA access methods and their

implementation in Huawei BRAS

3. RADIUS principles and its implementation in Huawei BRAS

Ethernet HA technology

1. Ethernet link aggregation working princple and configuration

2. Smart link and monitor link working princple and configuration

3. VRRP working princple and configuration






Pearson VUE :


1.1.3.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Access

Network (BCAN)

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Guide to Experiments on


10/126


9

Building Carrier Access Network (BCAN)


VRP Troubleshooting

VPR Feature Description



88980226HCDP-BCAN (Huawei Certified Datacom ProfessionalBuilding

Carrier Access Network) Training.III 6

1.1.4 Huawei Certified Datacom Professional - Building Carrier

Routing Network (HCDP-BCRN) Exam Outline


No prerequisites.


The HCDP-BCRN exam covers IPv4 address planning, RIP, OSPF, IS-IS, and BGP routing

protocols, routing and routing control, multicast routing protocols, IPv6 basic protocols,

IPv6 routing protocol, and Huawei routers.






Huawei CertifiedDatacom

Professional-Carrier



technology


IP Basics

1. IPv4 address planning: classless IP address planning, Classless Inter-Domain Routing

(CIDR), and NAT traversal

2. IPv6 basics: IPv6 packet structure, IPv6 address, ICMPv6 principles, basic neighbor

discovery principles, address autoconfiguration, PMTU auto-discovery principles, and

IPv6 address basic configuration


11/126


10

Routing Basics

1. Basic principles and configuration of static routing

2. Basic principles of dynamic routing protocols

RIPs

1. Principles of distance vector routing protocols

2. RIP protocol principles, configuration, and implementation, and troubleshooting of

common faults

3. RIPng principles, configuration, and implementation

OSPF Routing Protocols

1. Basic principles of link state routing protocols

2. OSPF principles, configuration, and implementation: neighbor and adjacency, protocol

packet and LSA, database synchronization, intra-area route calculation, inter-arearoute calculation, and external route calculation

3. Principles and configuration of OSPF special areas: stub area, totally stub area, and

not-so-stubby area (NSSA)

4. Basic methods of OSPF fault diagnosis

5. Basic principles and configuration of OSPFv3

IS-IS Routing Protocols

1. Basic principles, configuration, and implementation of IS-IS: basic protocol concepts,

adjacency, database synchronization, and route calculation

2. Basic methods of IS-IS fault diagnosis

3. Basic principles and configuration of IS-ISv6

BGP Routing Protocols

1. BGP principles: AS, BGP neighbors, route distribution methods, and route

advertisement rules

2. BGP path selection

3. BGP route aggregation

4. BGP routing policies: attributes and routings protocols commonly used in BGP

5. Basic principles and configuration of BGP route reflection and AS confederations for

BGP

6. BGP multi-homing

7. BGP fault diagnosis methods

8. Basic principles and configuration of MP-BGP for IPv6

Routing Control and Selection

1. Route filtering by using filtering tools such as ACL, route policy, IP-prefix, and AS-Path

2. Mutual route import between IP routing protocols and advertisement of default routes

3. Policy-based route


12/126


11

Multicast Protocols

1. Basic principles and configuration of IGMPv1/v2/v3 and IGMP snooping

2. Basic principles and configuration of PIM-DM and PIM-SM

NE5000E/5000E-X16 and NE40E-X Series Routers

1. Hardware structure and working principles of NE routers

2. VRP software features of NE routers



The exam is delivered by Pearosn VUE authorized test centers.You can register with thenearest test center to take the exam.


Pearson VUE :


1.1.4.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Routing

Network (BCRN) Vol. I.Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Routing

Network (BCRN) Vol. II.


Building Carrier Routing Network (BCRN)


VRP Troubleshooting




88980227HCDP-BCRN (Huawei Certified Datacom Professional - BuildingCarrier Routing Network) Training

III 9


13/126


12

1.1.5 Huawei Certified Datacom Professional-Building IP

Telecom Network (HCDP-BITN) Exam Outline


No prerequisites.


The HCDP-BITN exam covers common technologies of IPTV, 3G, and NGN IP bearer

networks such as MPLS VPN, MPLS TE, QoS, and HA.






Huawei CertifiedDatacomProfessional-Carrier



technology


QoS

1. IP QoS model and differentiated services (DiffServ) model

2. Basic principles of classification and marking, traffic policing and shaping, congestion

management, congestion avoidance, and link efficiency mechanisms and their

implementation in NE products

3. Class-based QoS principles and its implementation in NE products

High Availability (HA)1. NSF/NSR/GR principles

2. Bidirectional Forwarding Detection (BFD) principles

3. Basic principles of IP reroute, IP FRR, LDP FRR, VPN FRR, and TE FRR

4. VRRP principles, configuration, and application

MPLS VPN

1. MPLS principles and implementation: MPLS frame format and encapsulation, MPLS

data forwarding process, LDP neighbor discovery and session establishment, LDP

label management, and MPLS loop avoidance

2. Basic principles and implementation of MPLS VPN: single-domain MPLS VPN


14/126


13

principles and implementation; application of OSPF in MPLS VPN

3. MPLS VPN fault diagnosis: troubleshooting roadmap and debugging methods of

control plane faults; troubleshooting roadmap and debugging methods of data plane

faults

MPLS TE

1. MPLS TE principles and application: structure of MPLS TE and functions of its four

components, MPLS TE attributes, basic applications of MPLS TE, and basic

configuration and implementation of MPLS TE






Pearson VUE :


1.1.5.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building IP Telecom

Network (BITN)


Building IP Telecom Network (BITN)


VRP Troubleshooting




88980228HCDP-BITN (Huawei Certified Datacom Professional-Building IPTelecom Network) Training

III 7


15/126


14

1.1.6 Huawei Certified Internetwork Expert Improve Carrier

Network Performance (HCIE Carrier) Exam Outline


For those who are ready to get the HCIE Carrier Certification, and become Huawei Certified

Network Specialist.


HCIE Carrier certification includes Ethernet Technologies, VLAN, QinQ, STP/RSTP/MSTP,

PPP and PPPoE access technologies, AAA technologies, Huawei Switch and Broadband

Access Server; OSPFv2/v3, IS-ISv4/v6, BGP, MP-BGP for IPv6, IGMP, PIM-SM, PIM-DM;

MPLS, BGP MPLS VPN, QoS, VRRP, MPLS TE.






Huawei CertifiedDatacom Expert-Carrier



technology


Ethernet Technologies

1. Etherenet History, Auto-negotiation, Link Aggregation, Port Mirroring, Working

principle of layer 2/3 switch

1. 802.1Q encapsulation, VLAN realization on Huawei products, Isolate-User-VLAN2. VLAN inter-routing, Super VLAN, QinQ Theory and Configuration

3. GVRP protocol principle, Configuration and realisation

4. STP/RSTP/MSTP theory and configuration

IP Basic

1. IPv4 Address planning, classless IP address planning, Classless Inter Domain Routing,

NAT

2. IPv6 Basic, IPv6 packet format, IPv6 addreses, ICMPv6 theory configuration and

realization, Neighbor discovery, IPv6 address auto-configuration, PMTU auto

discovery theory, IPv6 address basic configuration


16/126


15

RIP Routing Protocol

1. Distance-vector routing protocol

2. RIP basic principle and configuration and troubleshooting

3. RIPng basic principle and configuration

OSPF Routing Protocol

1. Link-state routing protocol algorithm

2. OSPF basic principle, configuration and realization: Neighbor and Adjacency, OSPF

protocol packet and LSA, Database synchronization, intra-area routing calculation,

inter-area routing calculation, external route calculation

3. OSPF special area principle and configuration: Stub, Totally Stub, NSSA

4. OSPF troubleshooting

5. OSPFv3 principle, configuration and realization

IS-IS Routing Protocol

1. IS-IS basic principle, configuration and realization: ISIS basic concepts, adjacency

relationship, database synchronization, route calculation

2. IS-IS Troubleshooting

3. IS-ISv6 basic priciple, configuration and realization

BGP Routing Protocol

1. BGP Basic priciple, configutaion and realization: AS, BGP neighbor, routeadvertisement, BGP Route Advertisement Principles

2. BGP Route selection

3. BGP Route aggregation

4. BGP route policy: BGP route attribute and route policy

5. BGP RR and confederation principle, configutaion and realization

6. BGP multi-homing

7. BGP toubleshooting

8. MP-BGP for IPv6 basic priciple, configuration and realization

Route Control and Route Selection

1. Use ACL, route policy, IP-prefix, AS-Path as a route selection tools

2. Route redistribution between different routing protocolsdefault route distribution

3. Policy-based routing

Multicast

1. IGMPv1/v2/v3IGMP Snooping basic principle, configuration and realization

2. PIM-DMPIM-SM basic principle, configuration and realization


17/126


16

Basic Access and Authentication Technologies

1. IPoE/IPoEoVLAN/IPoEoA/Static user access principle and realization on Huawei

BRAS products ; Web authentication, Fast authentication, Binding authentication

working principle, configuration and realization on Huawei BRAS products.

2. PPPoE/PPPoEoVLAN/PPPoEoA/PPPoA access mode and realization on Huawei

BRAS products

3. Radius protocol principle, configurationrealization and on Huawei BRAS products

MPLS VPN

1. MPLS basic principle and realization: MPLS frame mode encapsulation, MPLS data

forwarding, LDP neighbor discovery and session establishment, LDP label

management, MPLS loop avoidance

2. MPLS VPN basic principle, configuration and realization: single area MPLS VPN basic

principle and realization; Application of OSPF in MPLS VPN3. MPLS VPN troubleshooting: control plane troubleshooting process and debugging

methods, data plane troubleshooting process and debugging methods

MPLS TE

1. MPLS TE basic principle, configuration and realization

2. MPLS TE four elements and function, MPLS TE attributes

Qos

1. IP QoS model, differentiated service model

2. Traffic classification and Marking, Traffic policing and shaping, congestion

management, congestion avoidance, Link Efficiency Mechanisms principle,

configuration and realization in Huawei products

3. Class-based QoS basic principle, configuration and realization in Huawei products

High Availability

1. ETH-TRUNKIP-TRUNKE-TRUNK basic principle

2. BFDBidirectional Forwarding Detectionbasic principle

3. IP RerouteIP FRRLDP FRRVPN FRRTE FRR basic principle, configuration andrealization

4. RPR basic principle, configuration and realization

5. VRRP basic principle, configuration and realization

IP Bearer Network and IP MAN Network Design

1. IP bearer Network, IP MAN Network structure and characteristic

2. IP bearer Network and IP MAN Network performance requirements

3. IGP COST design, dual plane switchover and protection


18/126


17

1.1.6.6 Referenced Documents

VRP Feature Description


VRP Troubleshotting


HCIE-Carrier certification exam was published through the authorized exam center

Pearson VUE. You could take this certification exam in any Pearson VUE center. For more

information, please visit Pearson VUE official website (http://www.pearsonvue.com)or from

Pearson VUE center.

1.1.6.8 Recommended Training


88980229/88980230

HCIE (Huawei Certified Internetwork Expert-Improve CarrierNetwork Performance) Training

IV 25

1.1.6.9 Huawei Certified Internetwork Expert - Lab Exam (HCIE Carrier Lab

Exam)

1) Lab exam will includes all the contents in HCIE-Carrier2) Lab exam will involve network model which is similar to current network operator model,

such as, back bone, bearer network and also MAN network.

3) Lab exam need to involve 12 to 18 equipments, eg : NE40EME60S5300S3300

Firewall and so on

4) Lab exam is 8 hours, includes interview, network plaining and configuration,

troubleshooting

5) Lab exam will be focused on network operators network planning and roll-out. This will

be a simulation towards a real live-network roll-out and implementation. Emphasis on

the students understanding and ability to handle issues towards the real live network

6) During lab exam, students should be able to do the troubleshooting through critical

thinking. During the exam process, simulation of the real live network problem will be

done in the lab for the students to investigate, this is to emphasize on the students

technical understanding and ability to solve a technical issue efficiently and accurately.

The contents rovided to students is a general test paper; other related contents discussed might alsoappear in the examinations.
http://www.pearsonvue.com.cn/http://www.pearsonvue.com.cn/


19/126


18

1.2 Access Network Exam Outline

1.2.1 Introduction of Access Network Exam


DurationItem number

TotalScore

Pass Score

HCNA AccessNetwork

HC-035-210-ENUHCNA Access

Network90 min

60 multiple-choicequestions (single-answer

and multiple-answer),true-false questions

1000 600

HCNP AccessNetwork

HC-035-211-ENUHCNP Access

Network90 min



1000 600

1.2.2 Huawei Certified Network Associate- Access Network

Exam Outline


No prerequisites.


This test covers: xDSL/ATM/GPON/EPON/DataCom basic theory. The following abilities

are required. Be familiar with hardware structure, features, standards, board types,

functions and interface. Know well about the detail steps of hardware installation,

commission, data configuration. Know how to use CLI of equipment to upgrade and be

familiar with HSIIPTVVOIP test and acceptance, understand how to use NMS, know

basic functions of SNMP, and can use NMS to add and monitor equipments.








technology


Theory

1. Know about basic theory of xDSL/ATM/GPON/EPON /DataCom/NMS/SNMP.


20/126


19

Product

1. Know about structure, feathures, standards, board types, functions and interfaces of

access network products.

Service Configuration

1. Be familiar with network solution and basic configuration: VLAN/IP configuration and

can use NMS for equipment commissioning

2. Service configuration of HSIIPTVVOIP

3. Add and monitor equipment on NMS

Acceptance test

1. Know how to test service of HSIIPTVVOIP

2. Know how to use optical power meter.

Software upgrading

1. Function well with CLI of equipment to upgrade

Maintenance and troubleshooting

1. Know basic maintenance function on NMS alarm, equipments, problem information

collection of NMS and basic problem locating.






Pearson VUE :


1.2.2.7 References

HCAN-A (Huawei Certified Access Network-Associate)



Huawei Certified Network Associate-Huawei Access Network Technologies and Device


21/126


20


88980009Huawei Certified Network Associate-Huawei Access NetworkTechnologies and Device

II 11

1.2.3 Huawei Certified Network Professional- Access Network

Exam Outline


Past HCAN-A (Huawei Certified Access Network-Associate)


This test covers: Theory of xDSL/ATM/GPON/EPON/DataCom, the following abilities are

required for the tester, usage of SNMP theory; knowing on troubleshooting of

xDSL/ATM/GPON/EPON; knowing about usage of DC upgrade tool, batch upgrade,NMS

upgrade; knowing how to do acceptance test for service of HSIIPTVVOIP, Familiar with

the typical solutions for Access Network migration and the usage of the migration tools








technology


Theory

1. Be familiar with xDSL/ATM/GPON/EPON /DATACOM; know theory of SNMP.

Product knowledge

1. Know hardware structure, features, standards, board type, fuction and interface.

Data configuration

1. Understand network solution and basic configuration: VLAN/IP configuration, and can

use NMS for equipment commissioning.

2. Know how to configure services on HSIIPTVVOIP.


22/126


21

3. Know how to add and monitor equipments on NMS.

4. NMS single-server system installation.

5. Function well on data plan and network design for FTTx

6. Function well on the typical solutions for Access Network migration and the usage of

the migration tools.

Acceptance test

1. Service acceptance testing on HSIIPTVVOIP

2. Usage of optical power meter.

3. Usage of network migration tools.

Software upgrading

1. Usage of DC tool, batch upgrade and NMS upgrade.


1. Know NMS alarms, problem information collection on NMS, basic troubleshooting.

Know NMS operating system and basic operation of database.






Pearson VUE :


1.2.3.7 References

HCAN-A (Huawei Certified Access Network-Associate)

HCAN -P(Huawei Certified Access Network-Professional)



Huawei Certified Network Professional-Huawei Access Network Technologies and Device


88980010Huawei Certified Network Professional-Huawei Access Network

Technologies and Device

III 13


23/126


22


24/126


23

1.3 Optical Network Exam Outline

1.3.1 Introduction of Optical Network Exam

Certificate Exam Name Exam Code Exam Name Exam Duration Item numberTotalScore

PassScore

HCNAOPTICAL

NETWORKHC-035-230-ENU

Huawei CertifiedNetwork

Associate-OpticalNetwork

90 min

60 multiple-choicequestions

(single-answer andmultiple-answer),

true-false questions

1000 600

HCNP-OpticalNetwork

HC-035-231-ENU


Professional-OpticalNetwork

90 min

60 multiple-choicequestions

(single-answer andmultiple-answer),

true-false questions

1000 600

1.3.2 Huawei Certified Network Associate-Optical Network

Exam Outline


No prerequisites.


This test covers: SDH/WDM/datacom basic theory. The following abilities are required. Be

familiar with hardware structure, features, standards, board types, functions and interface.

Know well about the detail steps of hardware installation, commission, data configuration.

Know how to use DC tool, board-lever upgrade and package loading simulation and be

familiar with MSTP/HMSTP/WDM test and acceptance, understand how to use NMS, know

basic functions of SNMP, and can use NMS to add and monitor equipments.







technology

Pass any subject of the high-level certification in the field of the localtechnology


25/126


24


Theory

2. Know about basic theory of SDH/WDM/datacom/NMS/SNMP.

Product

3. Know about structure, feathures, standards, board types, functions and interfaces of optical network

products.

Configuration

4. Be familiar with network solution and DCN configuration, NE ID/IP configuration, DWDM

commissoning

5. Service configuration of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY

6. Protect service configuration of SNCP/MSP/APS/TPS/LAG

7. Add and monitor equipment on NMS

Acceptance test

8. Know how to test service of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY

9. Know how to test SNCP/MSP/APS/TPS/LAG service.

10. Know how to use BER Tester and optical power meter.

Software upgrading:

11. Function well with DC tool, board-level upgrading and simulation package loading upgrade.


12. Know basic maintenance function on NMS alarm, equipments, problem information collection of

NMS and basic problem locating.






Pearson VUE :


1.3.2.7 References

HCNA (Huawei Certified Network Associate-Optical Network)



26/126


25


Huawei Certified Network Associate-Huawei Optical Network Technologies and Device

Training


88980011Huawei Certified Network Associate-Huawei Optical Network Technologiesand Device Training

II 15

1.3.3 Huawei Certified Network Professional-Optical Network

Exam Outline


No prerequisites.


This test covers: Theory or usage of SDH/WDM/datacom/clock, the following abilities are

required for the tester, understand usage of SNMP theory/OAM of MSTP/QoS on NMS;

knowing on troubleshooting of SDH/WDM; knowing about usage of DC update tool,

board-lever update, updating simulation; knowing how to do acceptance test for service of

MSTP/HMSTP/WDM, function well with cutover, service miguration solution making and

acting.







technology

Pass any subject of the high-level certification in the field of the localtechnology


Theory

1. Be familiar with SDH/WDM/Datacom/Clock basics; know theory of SNMP/ASON.

Product knowledge

1. Know hardware structure, features, standards, board type, fuction and interface.


27/126


26

Data configuration

1. Understand network solution and DCN configuration, NE ID/IP configuration, and can use NMS for

MSTP/HMSTP/WDM equipment commissioning.

2. Know how to configure services on TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY level.

3. Know how to configure protection of services such as SNCP/MSP/APS/TPS/LAG.

4. Know how to add and monitor equipments on NMS.

5. Know how to configure QoS/Clock/OAM of services.

6. NMS single-server system installation.

7. Function well on product data collection and basic service planning.

8. Function well on solution making and acting of cutover and service miguration.

Acceptance test

1. Service level on TDM(E1\STM-1\4\16\64)\ETH\ODUK\GE\40G\ANY

2. Know how to test protected service by SNCP/MSP/APS/TPS/LAG3. Usage of BER Tester and optical power meter.

4. Usage of SDH analyzer, OSA, Smartbits.

Software upgrading

1. Usage of DC tool, board-level upgrading and simulation upgrading.


1. Know NMS alarms, problem information collection on NMS, basic troubleshooting. Know NMS

operating system and basic operation of database.






Pearson VUE :


1.3.3.7 References

HCNA (Huawei Certified Network Associate-Optical Network)

HCNP (Huawei Certified Network Professional-Optical Network)



28/126


27


Huawei Certified Network Professional-Huawei Optical Network Technologies and Device

Training


88980012Huawei Certified Network Professional-Huawei Optical Network Technologiesand Device Training

III 10


29/126


28

1.4 Microwave Product Exam Outline

1.4.1 Introduction of Microwave Product Exam


DurationItem number Total Score

PassScore

HCNAMicrowave

ProductHC-035-240-ENU


Associate-MicrowaveProduct

90 min



1000 600

HCNPMicrowave

ProductHC-035-241-ENU


Professional-MicrowaveProduct

90 min



1000 600

1.4.2 Huawei Certified Network Associate-Microwave ProductExam Outline


No prerequisites.


The HCNA-HMTD exam covers digital microwave communication principle, ethernet basic,

RTN 600/900 product knowledge, RTN 600/900 installation and commissioning, hybridmicrowave configuration, acceptance test, software upgrade, routine maintenance.








technology


1. Digital microwave communication principle

2. Ethernet basic

3. Main characteristics of RTN 600/900 equipment

4. Hardware structure, function and application of RTN 600/900 equipment5. Function and interface of boards in RTN 600/900


30/126


29

6. Function and application of ODU/antenna

7. protection technologies in OptiX RTN 900 network

8. Installation procedure of RTN 600/900 equipment

9. RTN 600/900 commissioning

10. RTN 600/900 hybrid microwave configuration

11. RTN 900 acceptance test

12. RTN 900 software upgrade

13. RTN 600/900 routine maintenance

14. U2000-T Alarm and Performance






Pearson VUE :


1.4.2.7 References

Huawei Certified Network Training Courses HCNA: Huawei Microwave Technology and

Device (HMTD)



Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training.


88980013Huawei Certified Network Associate-Huawei Microwave

Technologies and Device Training.

II 9 days

1.4.3 Huawei Certified Network Professional-Microwave

Product Exam Outline


No prerequisites.


31/126


30


The HCNP-HMTD exam covers digital microwave comunication, ethernet basic, PSN basic,

RTN 900 product knowledge, RTN 900 installation and commissioning, RTN 900 packet

microwave configuration, QoS/OAM/Clock configuration, RTN 900 acceptance test,software upgrade, troubleshooting. U2000 Software Installation, U2000 product knowledge.








technology


1. Digital microwave communication principle

2. Ethernet basic

3. IP/MPLS/PWE3 basic

4. Main characteristics of RTN 900 equipment5. Hardware structure, function and application of RTN 600/900 equipment

6. Function and interface of boards in RTN 600/900

7. Function and application of ODU/antenna

8. Installation procedure of RTN 600/900 equipment

9. RTN 900 commissioning

10. RTN 900 packet service configuration

11. RTN 900 MPLS APS configuration

12. RTN 900 QoS/OAM/Clock configuration

13. RTN 900 acceptance test

14. RTN 900 software upgrade

15. RTN 900 troubleshooting/data collection

16. U2000-T system knowledge

17. U2000 Single-Server System Software Installation



32/126


31




To find the Pearosn VUE authorized test centers. , please log on the homepage of thePearson VUE :


1.4.3.7 References

Huawei Certified Network Training Courses HCNP: Huawei Microwave Technology and

Device (HMTD)



Huawei Certified Network Professional-Huawei Microwave Technologies and Device

Training


88980014Huawei Certified Network Professional-Huawei MicrowaveTechnologies and Device Training

III 7


33/126


32

2 Core Network

2.1 Mobile Soft Switch Exam Outline

2.1.1 Introduction of Mobile Soft Switch Exam Outline


DurationItem number

TotalScore

PassScore

HCNA MobileSoft Switch

HC-035-311-ENUHuawei certified mobile

soft switch engineer90 minutes

60 single choice,multiple choices, and

true or false900 550

HCNP MobileSoft Switch

HC-035-310-ENUHuawei certified mobile

soft switch senior engineer90 minutes

60 single choice,multiple choices, and

true or false900 550

2.1.2 Huawei Certified Network Associate- Mobile Soft Switch

Exam Outline


No prerequisites.


Mobile switching center and Media Gateway test covers the basic knowledge of mobile

core network communication, including TCP/IP, basic theory of mobile soft switch, SS7

signaling, hardware system of the MSOFTX3000 and UMG8900, data configuration for

network element interworking, common number analysis, basic call flow and the

corresponding protocols, MSOFTX3000 and UMG8900 fault troubleshooting, routine

maintenance and major maintenance and operation of the MSOFTX3000 and UMG8900.








technology


IP network

1. Basic concepts of network, layer 2 signaling exchanging, virtual local area network


34/126


33

2. Architecture of the open systems interconnection protocol and the TCP/IP protocol,

functions of each layer and packet encapsulation

3. IPv4 subnetting

Knowledge and principle of the MSOFTX3000 and UMG8900

1. The basic principle and architecture evolution of the core network

2. Product knowledge of the CPCI and ATCA MSOFTX3000, and the board layout and

capacity planning of the UMG8900

3. Data configuration for interconnection between the MSOFTX3000 and the UMG8900

and the corresponding network elements

4. Common number analysis of MSOFTX3000

5. Routine maintenance and major maintenance and operation including version upgrade,

patch loading, and operation rollback

Basic call flow and the corresponding protocols

1. Signaling analysis during location upgrade, ordinary calls (mobile originated calls,

mobile terminated calls and inter-MSC calls), handovers and short messages. The

way how the protocols such as H248, BICC, and SIGTRAN are realized in each

interface of the MSOFTX3000 and UMG8900

Troubleshooting

1. Troubleshooting in hardware fault and replacement, location update, and common

calls

This document only provides a general guide for the candidates rather than an actual coverage of the testcontent.


N/A

2.1.2.7 Reference

For product knowledge of the MSC and MGW, refer to the customer product document and

manual.


Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device

Training


88980015Huawei Certified Network Associate-Huawei Mobile Soft Switch

Technologies and Device Training

II 21


35/126


34

2.1.3 Huawei Certified Network Professional - Mobile Soft

Switch Exam Outline

2.1.3.1 Requirements for Candidates

No prerequisites.


Medium-level mobile soft switch test covers the knowledge of the core network

communication, data configuration between interconnected network elements, integrated

number and route analysis , integrated signaling analysis and the corresponding protocols,

integrated fault location, MSC Pool and AOIP solutions.








technology


IP network

1. Basic concepts in network, layer 2 and layer 3 signaling exchanging, and IP subnetting

2. IP transformation in mobile communications

Product knowledge and principle

1. The principle and architecture of mobile soft switch in the core network; data

configuration for interworking between network elements

2. Integrated number and route analysis

The protocols used in mobile soft switch and signaling analysis

1. The protocols such as MAP, CAP, BSSAP/RANAP, BICC, SIP, BICC, SIGTRAN, H248

and SCTP in the mobile soft switching interfaces and the signaling analysis during

basic services, supplementary service, value-added services, mobility management,

and handovers

Integrated troubleshooting1. Troubleshooting in the service, including bearer and signaling


36/126


35

Product solutions

1. MSC Pool and AoIP



N/A

2.1.3.7 Reference

For product knowledge of the mobile soft switch, refer to the customer product information.


Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and

Device Training


88980016Huawei Certified Network Professional-Huawei Mobile Soft SwitchTechnologies and Device Training

III 21


37/126


36

2.2 NGN Exam Outline

2.2.1 Introduction of NGN Exam Outline

Certificate Exam Name Exam Code Exam Name Exam Duration Item numberTotalScore

PassScore

HCNA NGN HC-035-320-ENU Huawei Certified NetworkAssociate-NGN

90 min

60 multiple-choicequestions(single-answer andmultiple-answer),true-false questions

1000 550

HCNP NGN HC-035-321-ENUHuawei Certified NetworkProfessional-NGN

90 min

60 multiple-choicequestions(single-answer andmultiple-answer),true-false questions

1000 550

2.2.2 Huawei Certified Network Associate-NGN Exam Outline


No prerequisites.


The NGN Primary Engineer Certification exam covers NGN system architecture, NGN

protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation

and maintenance, and troubleshooting.








technology


NGN Basic Principle

1. The basic concepts, system architecture, services, networking and applications of

NGN.

2. The components, services, networking and applications of Huawei U-SYS solution.

3. The functions, features, applications, terms, stack structure and messages of NGNprotocols (MGCP, H.248, SIP, SIGTRAN).


38/126


37

NGN Product Introduction

1. The network topology, services, functions, system structure, board functions, board

indicators, networking, applications and technical specifications of

SoftX3000/UMG8900/SG7000/MRS6100/SE2300.

2. The network topology, services and functions of U-Path.

NGN Basic Data Configuration

1. The hardware and local office data configuration of SoftX3000.

2. The hardware data configuration, MGW data configuration and IP bearer data

configuration.

3. The hardware data configuration of MRS6100.

4. The hardware data configuration and local office data configuration of SG7000.

NGN Data Configuration & Acceptance Testing

1. The service data configuration steps of SoftX3000, and the common service data

configuration (charging data configuration, media gateway data configuration, protocol

data configuration, SS7 signaling data configuration, routing data configuration, trunk

data configuration, number analysis data configuration, subscriber data configuration).

2. The service data configuration steps of UMG8900, and the common service data

configuration (TG data configuration, SG data configuration).

3. The service data configuration steps of MRS6100, and the system data configuration

and the voice file loading.

4. The service data configuration steps of SG7000, and the common service data

configuration (MTP data configuration, M3UA data configuration).

5. The service data configuration steps of SE2300, and the common service data

configuration (SNMP data configuration, signaling PROXY and media PROXY data

configuration).

6. The software installation and the service configuration of U-Path.

NGN Maintenance & Troubleshooting

1. The routine operation and maintenance of SoftX3000 (operator authority management,

database backup and restoration, data consistent checking between the host andBAM, log management, alarm management, device management, media gateway

management, protocol and signaling management, trunk circuit management,

subscriber management, bill management).

2. The routine operation and maintenance of iGWB.

3. The routine operation and maintenance of UMG8900 (database backup, log

management, alarm management, device management, protocol tracing, service

management).

4. The routine operation and maintenance of MRS6100 (log management, alarm

management, device management, message tracing).

5. The routine operation and maintenance of SG7000 (database backup, log


39/126


38

management, alarm management, device management, signaling tracing).

6. The routine operation and maintenance of SE2300 (log management, alarm

management, device management, signaling PROXY and media PROXY debugging).

7. The routine operation and maintenance of U-Path (log management, system status

browsing, and bill management).

8. The common troubleshooting of NGN equipment.

The exam content provided here serves only as a general guide to candidates. Other contents not mentionedhere may also be included in the actual exam.





Pearson VUE :


2.2.2.7 References

Huawei NGN product manuals


Huawei Certified Network Associate-Huawei NGN Technologies and Device Training


88980017Huawei Certified Network Associate-Huawei UMG&SBC Technologies andDevice Training

II 20

2.2.3 Huawei Certified Network Professional-NGN Exam

Outline


No prerequisites.


The NGN Primary Engineer Certification exam covers NGN system architecture, NGN

protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation

and maintenance, and troubleshooting.


40/126


39








technology


NGN Basic Principle1. The command parameters and call processing procedure of NGN protocols.

2. The principle, application of NGN dual home.

3. The NGN C4 and C5 office migration solution.

NGN Product Introduction

1. The working principle and service processing procedure of SoftX3000.

2. The principle, processing procedure, operation and original bill format of NGN

charging system

3. The system structure and configuration of iGWB.

4. The means of improving voice quality of NGN.

5. The working principle and service processing procedure of UMG8900.

6. The working principle, announcement principle and service processing procedure of

MRS6100.

NGN Basic Data Configuration

1. The service data configuration of SoftX3000 (number changing data configuration, call

barring data configuration).

2. The language conversion of voice and voice loading of MRS6100.

3. The service data configuration of SG7000 (MTP load sharing data configuration).

NGN Data Configuration & Acceptance Testing

1. The data planning and data configuration of NGN dual home.

2. The NGN C4 and C5 office migration operation.

NGN Maintenance & Troubleshooting

1. The routine maintenance of NGN dual home.

2. The common problem analysis and processing of NGN protocols.

3. The troubleshooting of NGN network.


41/126


40






Pearson VUE :


2.2.3.7 References

Huawei NGN product manuals


Huawei Certified Network Professional-Huawei NGN Technologies and Device Training


88980018Huawei Certified Network Professional-Huawei NGN Technologiesand Device Training

III 11


42/126


41

2.3 MGW&SBC Exam Outline

2.3.1 Introduction of MGW&SBC Exam Outline


DurationItem number

TotalScore

PassScore

HCNAMGW&SBC

HC-035-330-ENU

HCNA MGW&SBC(Huawei CertifiedNetwork

Associate-MGW&SBC)

90 minutes

60 questions:Single choice,multiple choices,and true or false

1000 550

2.3.2 Huawei Certified Network Associate- MGW&SBC Exam

Outline

2.3.2.1 Requirements for Candidates

No prerequisites.


Test for MGW&SBC software commissioning engineer contains the UMG8900 and the

session border controller (SBC), the mainstream products in Huawei mobile soft switch

(NGN/GU and CDMA).The test covers hardware components and working principle of the

UMG8900 and the SBC, their position in the network and the networking architecture,

external interface type, principle of the corresponding protocols such as H.248, ATM, SIP,and SIGTRAN, installation and commissioning, data configuration, operation and

maintenance, and troubleshooting methods.








technology


Principle

1. The position and function of the UMG8900/SBC in NGN/CS networking

2. System principle of the UMG8900

3. Common-used protocols such as SIP, ATM, H.248, SIGTRAN and No.7 signaling


43/126


42

4. Location and function of the SBC in the network; working principle, hardware

specification and typical networking of NAT/ALG/PROXY.

5. Working principle of the media gateway system, data and singling processing flow

between boards

Produce knowledge

1. Hardware architecture and components of the UMG8900 and the SBC

2. Function of the hardware and the logical boards of the UMG8900 and the SBC

3. System configuration principle, cascading mode and typical board configuration of the

UMG8900 and the SBC

Software Installation

1. Software upgrade, tone file creating and loading, and troubleshooting during the

software commissioning of the UMG8900 and the SBC

Configuration Description

1. General flow of data configuration, hardware configuration and local office data

configuration of the UMG8900 and the SBC

2. Data configuration specifications of the UMG8900 and the SBC

3. Commissioning of the interconnection between the UMG8900 and the SBC and

troubleshooting capacity

4. Commissioning configuration of the interconnection between the UMG8900 and the

SBC on an NGN and CS

5. Board layout and capacity planning of the UMG8900 and the SBC



The test is released by the authorized test center-Pearson VUE. You can select the nearest

Pearson VUE for application and to take the test.

For more details about the Pearson VUE, visithttp://www.pearsonvue.com.cn.

2.3.2.7 Reference

Customer product information of the UMG8900/SBC
