2013 Fiber Solutions Catalog

2013 Fiber Solutions Catalog

Welcome to BtX’s eXciting neW FiBer optic products catalog. BTX has been involved in selling fiber products for over 25 years. With

the continued reduction in cost differential between fiber and copper

products, the increased ease of fiber termination and the inherent

advantages of fiber, the dynamic growth of fiber in Broadcast and

A/V has just begun.

With this in mind, we’ve invested heavily in our new, dedicated fiber

lab based in our metro-NY corporate headquarters. The lab features

highly trained technicians and the industry’s most advanced termination

and test equipment. We offer custom Neutrik opticalCON® assemblies,

tactical fiber cables, distribution cables and much more. We’ve also

combined our fiber knowledge with our in-house metalworking

capabilities to create a wide variety of fiber breakout boxes and panels.

Along with these custom products, we offer thousands of fiber connectors,

cable, signal processing devices, tools and consumables. And there are

many new products to come. So, if you already use fiber extensively

in your projects, or if you’re just thinking about it, let us help. Our

experienced support staff can answer your questions and provide

sensible solutions to keep you ahead of your competition.

OPTICALSOLUTIONS

NEWFIBER LAB

Follow us on Twitter!twitter.com/btxtechnologies

Table of Contents

Fiber Connectors & Adaptors 5-8

Custom Fiber Assemblies 1-2

Fiber Assemblies & Bulk Fiber 3-4

Signal Processing 9-10

Fiber Testers & Tools 11-14

Fiber Accessories 15-16

Fiber Consumables 17

Installation Aids 18

Plug-and-Play Fiber Solutions 19

To Download a PDF version

of this catalog

Ordering InformationTo Order:

� Online: www.btx.com (24/7).

� Phone: 800.666.0996 (8:30am to 7pm EST Monday to Friday).

� Fax: 800.569.4244 (24/7).

� All in-stock orders will be shipped same day if ordered by 5pm EST.

� Custom or special order products are non-cancelable and non-returnable.

� All orders under $50 will be assessed a $10 small order charge.

Shipping Information: � Freight is FOB Hawthorne, NY or Salt Lake City, UT, depending on shipping location and stock

availability. In the event damaged merchandise is received, retain the original shipping carton and contact the shipping company. Please let us know if we can help.

� Unless otherwise specified, your order will ship via UPS ground service or best way. UPS Next Day Air, 2nd Day Air and 3-Day Select services are available upon request.

� FEDEX Air and other common carriers of your choice are also available.

Terms: � VISA, MasterCard, Discover and American Express are gladly accepted.

� Net 30 day terms are available upon BTX’s approval of a completed credit application.

� A service charge of 1-1/2% per month (18% annually) will be assessed against all past due balances.

� To wire payment, please contact us to request our bank information.

Returns: � All returns must have an RMA (Return Materials Authorization) number assigned by a member

of the BTX customer service or sales departments. This number must be clearly marked on the outside of the box or the box will be refused.

� Ship all returns, with original packaging and all product components pre-paid to BTX at 5 Skyline Drive, Hawthorne, NY 10532.

� All returned products with a valid RMA number will be evaluated. The issuance of an RMA number does not guarantee credit. If BTX deems that a product is defective and still within the warranty period, we will do one of the following at our discretion: repair or replace the product, issue a refund, or credit your account.

� Products accepted for return for reasons other than defect or error by BTX will be assessed a 15% re-stocking fee and must be received within 30 days from date of shipment. If a manufacturer’s restocking charge is greater than 15%, BTX will charge the manufacturer’s restocking fee.

� Custom or special order products are only returnable due to manufacturing defects or error by BTX.

Warranty:BTX guarantees products and equipment of its manufacture against all defects in material and/or work-manship and agrees to remedy any such defect at no charge provided the defective product is returned (transportation pre-paid) to BTX. This warranty extends for 5 years from date of purchase, and does not extend to products which have been subjected to neglect, accident, or improper use. Warranties on any distributed product sold by BTX are subject solely to the manufacturers’ written warranty. There are no other expressed or implied warranties except as set forth herein. BTX is not respondsible for consequential damages, incidental damages, or incidental expenses, including injury to persons or property.

Blanket Orders:You can rely on BTX to manage your regular shipments. Blanket orders must be received in written form with scheduled release dates. The period of a blanket order is for a maximum of 12 months. Blanket orders for standard product may be altered for release quantities or dates with written approval from BTX. If release dates are accelerated, BTX will make every reasonable effort to accommodate the new requirements but shall not be held responsible to meet these new dates. Blanket orders for custom products are non-cancelable and non-returnable. If you require BTX to keep a given amount of bonded inventory for your use, this inventory must be paid for when inventory is segregated for your exclusive use. If at the end of 12 months you have not taken all product from the blanket, BTX reserves the right to ship the remaining product and bill you accordingly.

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s1 Custom Fiber Assemblies

BTX-NO

fiBer / CONNeCTOr

2FOMM = DUO Multi-mode2FOSM = DUO Single-mode2FHSM = DUO SMPTE (Single-mode Only)4FOMM = QUAD Multi-mode4FOSM = QUAD Single-mode

Please fill in custom length required

- + +

LeNgTh (FEET) reeL / SpOOLiNg OpTiONS†

R31 = Small Reel (14.45")R38 = Medium Reel (19.33")R52 = Large Reel (21.85")

† Standard Schill reels listed. Multiple options available

neutrik opticalcon®

Neutrik’s opticalCON® line is based on standard optical LC-Duplex connections and features rugged-body, high-performance fiber contacts and a unique shutter design to protect against dust and dirt. This group of products provides maximum reliability and has gained wide acceptance in the pro audio, A/V and broadcast industries. Assemblies made with opticalCON® can only be sold through fiber assembly houses, such as BTX, who have completed the required training process and achieved certification.

Example Part #: BTX-NO2fOMM50r31Part Prefix Fiber/Connector Length

In FeetReel

Breakout-style fiber optic cable is an optical fiber cable containing several jacketed simplex optical fibers. Each individual fiber typically has its own Aramid or Kevlar strength member. This is then all cabled together under a single jacket with a central strength member/filler. Breakout cables can typically be connected directly to panels due to the protection provided by the individual jackets.

BTX FIBER TIP

Example Part #:

BTX-fT

fiBer

LCSCST

DLC (Duplex)DSC (Duplex)

LCSCST

DLC (Duplex)DSC (Duplex)

# Of fiBer STraNdS

- + + + +

246810121824


1ST eNd CONNeCTOr

STyLe

2Nd eNd CONNeCTOr

STyLe

SD (Tactical, SM 9um, Distribution)SB (Tactical, SM 9um, Breakout)MD50 (Tactical, MM 50um, Distribution)MB50 (Tactical, MM 50um, Breakout)MD62 (Tactical, MM 62.5um, Distribution)MB62 (Tactical, MM 62.5um, Breakout)

BTX-fTMd506LCSC50Part Prefix # Fiber

StandsLength In Feet

2ndEnd

1stEnd

Fiber

LeNgTh (FEET)

tactical Fiber snake cablesThese multi-strand tactical fiber assemblies are designed for heavy handling in harsh commercial environments where deployment and re-deployment is required.

email: [email protected] web: www.btx.com

The World’s Finest Interface, Integration and System Products

2013

: Fib

er O

ptic

sO

luti

On

s

2Custom Fiber Assemblies

permanent install Fiber snake cablesThese fiber snake cables are ideal for permanent installations in an air plenum or rack environment. These are the easiest cables to install when making a direct termination to a connector and/or a direct run to a panel. Also ideal for use with a junction or breakout box.

custom Fiber optic Jumper cablesThese resilient and flexible custom jumper cable assemblies are suitable for general-purpose indoor use, such as routing connec-tions in patching systems. They are also ideal for links between multiple pieces of electronic equipment.

distribution-style fiber optic cable is an optical cable containing tight-buffered fibers with no individual jacket. These are cabled together with an overall Aramid or Kevlar strength member as well as a central strength member/filler. Distribution cable typically requires a junction or breakout box to protect the fibers when connected.

BTX FIBER TIP

BTX-fp -


LCSCST

DLCDSC

1ST eNd CONNeCTOr

STyLe

LCSCST

DLCDSC

2Nd eNd CONNeCTOr

STyLefiBer

SD (SM 9um, Distribution)SB (SM 9um, Breakout)M50D (MM 50um, Distribution)M50B (MM 50um, Breakout)M62D (MM 62.5um, Distribution)M62B (MM 62.5um,Breakout)

raTiNg

R (Riser)P (Plenum)

+ + + + +

Example Part #: BTX-fppM50d8LCLC50Part Prefix FiberRating 1st

End2ndEnd

Length In Feet

LeNgTh (FEET)

246810121824

# Of fiBer STraNdS

# FiberStands

BTX-fJpM50XLCLC150Part Prefix 1st

End2ndEnd

Length In Feet

Example Part #:

BTX-fJ - + + +

1ST eNd CONNeCTOr

STyLe

2Nd eNd CONNeCTOr

STyLefiBerraTiNg

LCSCST

DLCDSC

LCSCST

DLCDSC


SX (Simplex SM)SXX (Duplex SM) M50X (Simplex MM 50/125)M50XX (Duplex MM)M62X (Simplex MM 62.5/125)M62XX (Duplex MM)

R (Riser)P (Plenum)

+

LeNgTh (FEET)

FiberRating

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s3 Fiber Assemblies & Bulk Fiber

Bulk simplex and duplex riser and plenum cables

� Rugged construction � 62.5 / 125 multi-mode Corning fiber

� 15X OD installation bend radius, 10X OD long-term bend radius

� -20° C to 70° C operating temp

These impact-resistant interconnect cables are designed for video, voice and data applications. They feature small overall diameters and bend radii allowing for easy installation in tight areas.

FeaTures Part # # Fibers OD Wt./1000 ft. RatingWV-FO1r 1 0.11" 4.71 lbs. NEC OFNRWV-FO1P 1 0.11" 5.42 lbs. NEC OFNPWV-FO2r 2 0.114 x 0.23" 9.42 lbs. NEC OFNRWV-FO2P 2 0.114 x 0.23" 10.86 lbs. NEC OFNP

Fiber optic assemblies - standard lengthThese multi-mode LC, ST and SC fiber optic assemblies are manufactured with 62.5/125 µm multi-mode fiber optic cable and rugged connectors with reliable machined ferrules. for single-mode versions, add an “S” to the end of any part number below.

SimplexLength LC to LC sT to LC sC to LC sT to sT sC to sC sT to sC3.28 ft. (1 meter) YV-FOsILC1 YV-FOsIsTLC1 YV-FOsIsCLC1 YV-FOsIsT1 YV-FOsIsC1 YV-FOsIsTsC1

6.56 ft. (2 meter) YV-FOsILC2 YV-FOsIsTLC2 YV-FOsIsCLC2 YV-FOsIsT2 YV-FOsIsC2 YV-FOsIsTsC2




50 ft. YV-FOsILC50 YV-FOsIsTLC50 YV-FOsIsCLC50 YV-FOsIsT50 YV-FOsIsC50 YV-FOsIsTsC50



DuplexLength LC to LC sT to LC sC to LC sT to sT sC to sC sT to sC3.28 ft. (1 meter) YV-FODuLC1 YV-FODusTLC1 YV-FODusCLC1 YV-FODusT1 YV-FODusC1 YV-FODusTsC1

6.56 ft. (2 meter) YV-FODuLC2 YV-FODusTLC2 YV-FODusCLC2 YV-FODusT2 YV-FODusC2 YV-FODusTsC2




50 ft. YV-FODuLC50 YV-FODusTLC50 YV-FODusCLC50 YV-FODusT50 YV-FODusC50 YV-FODusTsC50



ST Simplex

SC Simplex

LC Duplex

smpte Hybrid Fiber optic camera assembliesThese HDTV camera assemblies are both SMPTE 311M and SMPTE 304M compliant. Manufactured with Mohawk, Belden or equivalent 311M cable, these hybrid assemblies contain two tight buffered, single-mode optical fibers, four 20 AWG stranded and two 24 AWG stranded tinned copper conductors. The LEMO® 3k series connectors feature low insertion and return loss specs, a quick disconnect push-pull latching system, a solid stainless steel outer shell with a protective rubber boot and end cap to withstand rugged and harsh environments.

FeaTures � Complies with SMPTE 311M & 304M specifications � Manufactured with Mohawk, Belden cable or SMPTE 311M equivalent cable

� Push-Pull latching system � Harsh environment stainless steel outer shell � Manufactured with LEMO® 3k series connectors � Protective rubber boot and end cap

Part Number Description

YV-HDTVL50 SMPTE 304M LEMO Plug to Receptacle, 50 ft.









2013

: Fib

er O

ptic

sO

luti

On

s

4Bulk Fiber

multi-strand distribution and loose tube Fiber � Flexible, easy to handle, & easy to install � 15X OD installation bend radius � 10X OD long-term bend radius � -20° C to 70° C operating temperature

Minimums may apply Minimums may apply

riser-rated Cable

# of Fibers Multimode single-mode OD rating

2 WV-FOD2r WV-FOD2rs 0.184" Riser / UL 1666






Plenum-rated Cable

# of Fibers Multimode single-mode OD rating

2 WV-FOD2P WV-FOD2Ps 0.184" Plenum / NFPA 262






Loose Tube riser CableLoose tube cables are designed for a variety of outside plant applications and can be installed in cable tray, conduit, aerially, or directly buried. Minimums may apply.

Loose Tube Breakout KitsFanout kits route 250 µm of fiber into 900 µm tubes ready for connectorization. Easily installed in minutes, these kits require no special tools. 24" length.

# of Fibers Multimode Single-mode OD

6 WV-FOL6r WV-FOL6rs 0.38"



Cable Type Fiber Count Part Number

Loose Tube Fanout Kit (for 3.0 mm tube) 6 Fibers aFL-C189826Loose Tube Fanout Kit (for 3.0 mm tube) 12 Fibers aFL-C189818

Breakout and distribution Bulk cableBTX offers a full suite of bulk fiber solutions from OCC. Below is just a sampling of what is available. Much more available at www.btx.com.


OCC-Be006DsLX9Kr D-Series Breakout Fiber (SM), 6 Strand, Riser

OCC-Be006DWLs9Kr D-Series Breakout Fiber MM (OM1), 6 Strand, Riser

OCC-Be006DaLT9Qr D-Series Breakout Fiber MM (OM3), 6 Strand, Riser







OCC-BX006KsLX9YP D-Series Breakout Fiber (SM), 6 Strand, Plenum

OCC-BX006KWLs9OP D-Series Breakout Fiber MM (OM1), 6 Strand,Plenum

OCC-BX006KaLT9QP D-Series Breakout Fiber MM (OM3), 6 Strand, Plenum


OCC-BX012KWLs9OP D-Series Breakout Fiber MM (OM1), 12 Strand, Plenum



OCC-BX024KWLs9OP D-Series Breakout Fiber MM (OM1), 24 Strand, Plenum


OCC-DX006KsLX9YP D-Series Distribution Fiber (SM), 6 Strand, Plenum

OCC-DX006KWLs9OP D-Series Distribution Fiber MM (OM1), 6 Strand, Plenum

OCC-DX006KaLT9QP D-Series Distribution Fiber MM (OM3), 6 Strand, Plenum








OCC-DX006DsLX9Yr D-Series Distribution Fiber (SM), 6 Strand, Riser

OCC-DX006DWLs9Or D-Series Distribution Fiber MM (OM1), 6 Strand, Riser

OCC-DX006DaLT9Qr D-Series Distribution Fiber MM (OM3), 6 Strand,Riser







OCC-DX004CsLa9KB D-Series Distribution Fiber (SM), 4 Strand,Tactical

OCC-DX004CWLs9KB D-Series Distribution Fiber MM (OM1), 4 Strand, Tactical

OCC-DX004CaLT9KB D-Series Distribution Fiber MM (OM3), 4 Strand, Tactical







OCC-BX004CsLa9KB D-Series Breakout Fiber (SM), 4 Strand,Tactical

OCC-BX004CWLs9KB D-Series Breakout Fiber MM (OM1), 4 Strand, Tactical

OCC-BX004CaLT9KB D-Series Breakout Fiber MM (OM3), 4 Strand, Tactical







Multi-mode 62.5/125 & Single-mode 8.3/125 distribution riser & plenum Cable Distribution cables are tight buffered, multi-fiber cables designed for trunking and LAN applications. These riser and plenum rated cables offer a compact design that provides easy installation in tight areas.

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s5 Fiber Connectors & Adaptors

senKo sc and st Fiber connectors and adapters All of the SENKO SC and ST connectors are available in single-mode and multi-mode versions, and come with a zirconia ceramic ferrule with pre-polished PC profile and convex spherical end. The Standard SC / ST pre-assembled 1pc connector series provides value for cost and meets IEC, and the general requirement of GR-326. The Premium ST / SC connectors are designed to meet the highest requirements in the market and meets and exceeds the Verizon FOC TPR requirement.

senKo lc Fiber connectors and adapters The SENKO LC family of single-mode and multi-mode small form factor (SFF) connectors are ideal for high density applications. The LC connectors have a zirconia ceramic ferrule measuring 1.25mm O.D. and provide optimum insertion and return loss. The Standard LC connector gives the maximum value for cost and meets IEC, and the general requirement of GR-326. The Premium LC unibody connector molded with a single body delivers maximum strength against mechanical tests, including side loading and TWAL tests. The Premium LC also and meets and exceeds the Verizon FOC TPR requirement.

Part No Connector Type Mode Description

seN-9312512B3 LC MM Premium LC 127um, 900um black boot

seN-9312512C3 LC MM Premium LC 127um, 2mm black boot

seN-9312512D3 LC MM Premium LC 127um, 3mm black boot

seN-9322512B3 LC MM Premium Duplex LC 127um, 900um black boot

seN-9322512C3 LC MM Premium Duplex LC 127um, 2mm black boot

seN-9322512D3 LC MM Premium Duplex LC 127um, 3mm black boot

seN-988M3s11N LC SM LC Duplex SM Metal Panel Adapter

seN-988M3s31N LC MM LC Duplex MM Metal Panel Adapter


seN-9311531B1 LC SM Premium LC 125um, 900um white boot

seN-9311531C1 LC SM Premium LC 125um, 2mm white boot

seN-9311531D1 LC SM Premium LC 125um, 3mm white boot

seN-9321531B1 LC SM Premium Duplex LC 125um, 900um white boot

seN-9321531C1 LC SM Premium Duplex LC 125um, 2mm white boot

seN-9321531D1 LC SM Premium Duplex LC 125um, 3mm white boot


seN-9112512B3 LC MM Standard Duplex LC 127um, 900um black boot

seN-9112512C3 LC MM Standard Duplex LC 127um, 2mm black boot

seN-9112512D3 LC MM Standard Duplex LC 127um, 3mm black boot

seN-9122512B3 LC MM Standard Duplex LC 127um, 900um black boot

seN-9122512C3 LC MM Standard Duplex LC 127um, 2mm black boot

seN-9122512D3 LC MM Standard Duplex LC 127um, 3mm black boot


seN-2541936M7 SC SM Premium SC SM 125 um, 900um white boot

seN-2541936N7 SC SM Premium SC SM 125 um, 2mm white boot

seN-2541936P7 SC SM Premium SC SM 125 um, 3mm white boot

seN-2542919M2 SC MM Premium SC MM 127 um, 900um white boot

seN-2542919N2 SC MM Premium SC MM 127 um, 2mm white boot

seN-2542919P2 SC MM Premium SC MM 127 um, 3mm white boot

seN-226101 SC - SC Simplex Metal Panel Adapter

seN-228101 SC - SC Duplex Metal Panel Adapter


seN-2311916M1 SC SM Standard SC SM 125.5 um, 900um blue boot

seN-2311916N1 SC SM Standard SC SM 125.5 um, 2mm blue boot

seN-2311916P1 SC SM Standard SC SM 125.5 um, 3mm blue boot

seN-2312919M2 SC MM Standard SC MM 127 um, 900um black boot

seN-2312919N2 SC MM Standard SC MM 127 um, 2mm black boot

seN-2312919P2 SC MM Standard SC MM 127 um, 3mm black boot


seN-215103M7 ST SM Premium ST SM 125 um, 900um white boot

seN-215103N7 ST SM Premium ST SM 125 um, 2mm white boot

seN-215103P7 ST SM Premium ST SM 125 um, 3mm white boot

seN-215201M2 ST MM Premium ST MM 127 um, 900 um black boot

seN-215201N2 ST MM Premium ST MM 127 um, 2mm black boot

seN-215201P7 ST MM Premium ST MM 127 um, 3mm white boot

seN-216101 ST - ST Simplex Metal Panel Adapter

seN-316101 ST - ST Duplex Metal Panel Adapter


seN-233101M1 ST SM Standard ST SM 125.5 um, 900um blue boot

seN-233101N1 ST SM Standard ST SM 125.5 um, 2mm blue boot

seN-233101P1 ST SM Standard ST SM 125.5 um, 3mm blue boot

seN-233201M2 ST MM Standard ST MM 127 um, 900 um black boot

seN-233201N2 ST MM Standard ST MM 127 um, 2mm black boot

seN-233201P2 ST MM Standard ST MM 127 um, 3mm blue boot


seN-9111511B1 LC SM Standard LC 125.5um, 900um white boot

seN-9111511C1 LC SM Standard LC 125.5um, 2mm white boot

seN-9111511D1 LC SM Standard LC 125.5um, 3mm white boot

seN-9121511B1 LC SM Standard Duplex LC 125.5um, 900um white boot

seN-9121511C1 LC SM Standard Duplex LC 125.5um, 2mm white boot

seN-9121511D1 LC SM Standard Duplex LC 125.5um, 3mm white boot



2013

: Fib

er O

ptic

sO

luti

On

s

6Fiber Connectors & Adaptors

Termination requires no specialized or proprietary tools but Belden offers these install kits which include everything you need.

Installation Kit PartsField Installation Kit Precision Installation Kit

Part # - BeL-aX104270 Part # - BeL-aX104271Installation Pouch • •Installation Guide and Laminated Measuring Card • •Demonstration Video • •Brilliance Support Handle with Adapters • •Fiber/Cable Stripper • •Tweezers • •Pen Marker • •Alcohol Wipes (10) • •Scissors • •Waste Bottle • •Safety Glasses • •Brilliance Pocket Visual Fault Locator (VFL) with Adapter Cords • •Cleave Inspection Microscope •Brilliance Field Cleaver •Brilliance Precision Cleaver •

Connector Performance

Using Precision Cleaver Using Field Cleaver

ReflectanceMaximumInsertion

Loss

TypicalInsertion

Loss

Maximum Insertion

Lass

Typical Insertion

Loss

Multimode 0.50 dB 0.20 dB 0.75 dB 0.30 dB -25 dBSingle-mode 0.50 dB 0.30 dB 0.75 dB 0.30 dB -50 dBSingle-mode APC 0.75 dB 0.30 dB 0.75 dB 0.30 dB -60 dB

Description

BTX Part Number

Multi-mode, OM1, 62.5µm

Multi-mode, OM2, 50µm

Multi-mode, OM3-OM4, 50µm

1 per package 25 per package 1 per package 25 per package 1 per package 25 per package

LC 900µm Tight Buffer BeL-aX104240s1 BeL-aX104240B25 BeL-aX104241s1 BeL-aX104241B25 BeL-aX104242s1 BeL-aX104242B25

SC 900µm Tight Buffer BeL-aX104244s1 BeL-aX104244B25 BeL-aX104245s1 BeL-aX104245B25 BeL-aX104246s1 BeL-aX104246B25

ST 900µm Tight Buffer BeL-aX104248s1 BeL-aX104248B25 BeL-aX104249s1 BeL-aX104249B25 BeL-aX104250s1 BeL-aX104250B25

LC jacketed 2.0mm* BeL-aX104254s1 BeL-aX104254B25 BeL-aX104255s1 BeL-aX104255B25 BeL-aX104256s1 BeL-aX104256B25

SC jacketed 2.0mm* BeL-aX104258s1 BeL-aX104258B25 BeL-aX104259s1 BeL-aX104259B25 BeL-aX104260s1 BeL-aX104260B25

ST jacketed 2.0mm* BeL-aX104262s1 BeL-aX104262B25 BeL-aX104263s1 BeL-aX104263B25 BeL-aX104264s1 BeL-aX104264B25

Description

BTX Part Number

Single-mode, OS2 Single-mode, OS2-APC

1 per package 25 per package 1 per package 25 per package

LC 900µm Tight Buffer BeL-aX104243s1 BeL-aX104243B25 - -

SC 900µm Tight Buffer BeL-aX104247s1 BeL-aX104247B25 BeL-aX104253s1 BeL-aX104253B25

ST 900µm Tight Buffer BeL-aX104251s1 BeL-aX104251B25 - -

LC jacketed 2.0mm* BeL-aX104257s1 BeL-aX104257B25 - -

SC jacketed 2.0mm* BeL-aX104261s1 BeL-aX104261B25 BeL-aX104467s1 BeL-aX104467B25

ST jacketed 2.0mm* BeL-aX104265s1 BeL-aX104265B25 - -

Type

Color of Housing

Multi-mode, OM1, 62.5µm

Multi-mode, OM2, 50µm

Multi-mode, OM3 - OM4,

50µm

Single-mode, OS2

Single-mode, OS2 - APC

LC Beige Black Aqua Blue -SC Beige Black Aqua Blue GreenST Beige Black Aqua Blue -

The FiberExpress® Brilliance® Connectors require no epoxy, no polish and no crimp. These fiber optic connectors provide a quick and greatly simplified tool-less fiber termination process and the ability to quickly and reliably verify the termination once it is made. The connectors are available as 900 µm tight buffered, 2mm or 3mm jacketed, single-mode (OS2) and multi-mode (OM1, OM2, OM3-OM4) LC, SC and ST Connectors.

* The jacketed version includes a 2mm boot. A separate part number is available for 3mm boot.

Belden FiberExpress® connectors - Brilliance Field-installable connectors and installation Kits

STeP 1: Insert Fiber

STeP 2: activate Tab STeP 3: Install Boot

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s7 Fiber Connectors & Adaptors

neutrik opticcon® connectors

aFl Fast™ connectorsAFL FAST™ Connectors are factory pre-polished, field installable connectors that completely eliminate the need for hand polishing in the field. It features a proven mechanical splice technology that insures a precision fiber alignment. Each connector comes with a factory pre-cleaved fiber stub with a proprietary index-matching gel that combine to offer an immediate low loss termination to either single-mode or multi-mode optical fibers. FAST™ Connectors are compatible with 250µm and 900µm optical fibers, as well as 900µm, 2mm, and 3mm cordage. All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed

and discarded upon completion of the termination. Incorporated into this device is an innovative, translucent wedge enabling the use of a common Visual Fault Indicator (VFI) to provide a “pass/fail” signal once physical contact is achieved.

KeY FeaTures: � Pre-stubbed, factory-polished ferrule � No epoxy required � Precision mechanical alignment insures low loss

� Fiber can be reseated � 3.0mm, 2.0mm, and 900µm boot provided with each connector on the SC and LC connectors only

� VFI can be used to confirm fiber is installed properly

� Meets TIA/EIA 568A performance requirements � Meets TIA/EIA 604 (FOCIS) connector interface requirements

Part Number (Pack of 6)

Part Number (Pack of 100) AFL FAST Connectors

aFL-FasTsCMM506 aFL-FasTsCMM50100 FAST™ SC connector, 50/125um - multi-mode

aFL-FasTsCMM6256 aFL-FasTsCMM625100 FAST™ SC connector, 62.5/125um - multi-mode

aFL-FasTsCsM6 aFL-FasTsCsM100 FAST™ SC connector, single-mode

aFL-FasTsCMM50L6 aFL-FasTsCMM50L100 FAST™ SC connector, 10G Laser Optimized 50/125um - multi-mode

aFL-FasTsTMM506 aFL-FasTsTMM50100 FAST™ ST connector, 50/125um - multi-mode

aFL-FasTsTMM6256 aFL-FasTsTMM625100 FAST™ ST connector, 62.5/125um - multi-mode

aFL-FasTsTsM6 aFL-FasTsTsM100 FAST™ ST connector, single-mode

aFL-FasTsTMM50L6 aFL-FasTsTMM50L100 FAST™ ST connector, 10G Laser Optimized 50/125um - multi-mode

aFL-FasTLCMM506 aFL-FasTLCMM50100 FAST™ LC connector, 50/125um - multi-mode

aFL-FasTLCMM6256 aFL-FasTLCMM625100 FAST™ LC connector, 62.5/125um - multi-mode

aFL-FasTLCsM6 aFL-FasTLCsM100 FAST™ LC connector, single-mode

aFL-FasTLCMM50L6 aFL-FasTLCMM50L100 FAST™ LC connector, 10G Laser Optimized 50/125um - multi-mode

aFl Fast connector tool KitThe FAST™ Connector Tool Kit provides all the necessary installation tools required for fiber preparation of 250μm or 900μm fibers applied to AFL’s new pre-polished FAST™ connectors. The kit includes the new universal multi-mode/single-mode cleaver (CT-30A), AFL’s premier cleaver, with a 16 position blade and built-in fiber scrap collector.

It also includes a fiber strip/cleave template, fiber stripper, kevlar scissors, fiber prep fluid, lint free cloth wipes, an assembly video and carrying case.

Part Number AFL FAST™ Connectors

aFL-Cs001201 AFL Fast™ Connector Tool Kit

Neutrik opticalCON® Connectors - Ruggedized and dirt protected fiber optic connection system using conventional LC-Duplex connectors. It is built in the standard “D” size shell and features an automatic sealing cover for maximum dust and dirt protection and a push-pull locking mechanism for safe connection. Four additional solder cups will allow you to run power or data over copper.

IP65 raTeD VersIONs: � Shutter with silicone gasket protects optical connection from dust and dirt � Waterproof according to IP65 ingress protection � Rubber gasket color coded to identify fiber mode: Multi-mode – black, Single-mode PC – blue, Single-mode APC – green

IP65 Rated VersionsPart # Mount Plating ContactsCD-NO24FDWa Chassis Black Chrome 4 solder contactsCD-NO24FDWra Chassis Black Chrome 4 solder contactsCD-NO24FDW1a Chassis Black Chrome 4 solder contacts and 1 shell ground contactCD-NO24FDW1ra Chassis Black Chrome 4 solder contacts and 1 shell ground contact

IP65 Rated VersionsopticalCON LC-Duplex CouplersPart # DescriptionCD-NaO2M4s75Wa Multimode PCCD-NaO2s4s75Wa Single-mode PCCD-NaO2sa4s75Wa Single-mode APC



2013

: Fib

er O

ptic

sO

luti

On

s

8Fiber Connectors & Adaptors

aFl Fuseconnect™ splice-on connectorsAFL FuseConnect™ connectors are SC, FC, LC or ST fusion-spliced, field-terminated connectors that are uniquely designed and feature just four components. With a factory pre-polished ferrule, its innovative field termination process eliminates polishing, adhesives, and crimping in the field minimizing the potential for operator error and expensive connector scrap. FuseConnect™ utilizes a fusion splicer (shown on page 11) to terminate the connector in the field, addressing return loss concerns present in analog optical networks. This advanced process yields true APC performance of >65dB return loss in an SC/APC configuration and SC single-mode is compliant to GR-326-CORE. Designed to work with an industry standard 10mm cleave length and splicers utilizing a fiber holder system, FuseConnect™ is compatible with Fujikura fusion splicers and most other fiber holder-based fusion splicing platforms. FuseConnect™ 900µm connectors do not require the optional FuseConnect Installation Kit. They only require the 900µm FuseConnect™ fiber holder for installation.

Part Number AFLFuseConnect™ ConnectorsaFL-FusesC23MsMa6 FuseConnect™,SC,APC,SM, 2.0 & 3.0MM, 6 pack - GREEN

aFL-FusesC9usMa6 FuseConnect™,SC,APC,SM,900UM, 6 pack - GREEN

aFL-FusesC23MsMu6 FuseConnect™,SC,UPC,SM, 2.0 & 3.0MM, 6 pack - BLUE

aFL-FusesC9usMu6 FuseConnect™, SM, SC, UPC, 900UM, 6 pack - BLUE

aFL-FusesC23MMM626 FuseConnect™,SC,PC,MM,62.5UM,2.0 & 3.0MM, 6 pack - BEIGE

aFL-FusesC9uMM626 FuseConnect™,SC,PC,MM,62.5UM,900UM, 6 pack - BEIGE

aFL-FusesC23MMM506 FuseConnect™,SC,PC,MM,50UM, 2.0 & 3.0MM, 6 pack - BLACK

aFL-FusesC9uMM506 FuseConnect™,SC,PC,MM,50UM,900UM, 6 pack - BLACK

aFL-FusesC23MMM50L6 FuseConnect™,SC,PC,MM,50UM 10GIG, 2.0 & 3.0MM, 6 pack - AQUA

aFL-FusesC9uMM50L6 FuseConnect™,SC,PC,MM,50UM 10GIG, 900UM, 6 pack - AQUA

aFL-FuseLC2MsMu6 FuseConnect™,LC,UPC,SM,2.0MM, 6 pack - BLUE

aFL-FuseLC9usMu6 FuseConnect™,LC,UPC,SM,2.0MM, 6 pack - BLUE

aFL-FuseLC2MMM626 FuseConnect™,LC,PC,MM,62.5UM,2.0MM, 6 pack - BEIGE

aFL-FuseLC9uMM626 FuseConnect™,LC,PC,MM,62.5UM,900UM, 6 pack - BEIGE

aFL-FuseLC2MMM506 FuseConnect™,LC,PC,MM,50UM,2.0MM, 6 pack - BLACK

Part Number AFLFuseConnect™ ConnectorsaFL-FuseLC9uMM506 FuseConnect™,LC,PC,MM,50UM,900UM, 6 pack - BLACK

aFL-FuseLC2MMM50L6 FuseConnect™,LC,PC,MM,50UM 10GIG, 2.0MM, 6 pack - AQUA

aFL-FuseLC9uMM50L6 FuseConnect™,LC,PC,MM,50UM 10GIG, 900UM, 6 pack - AQUA

aFL-FuseLC9usMa6 FuseConnect™,LC,APC,SM,900UM, 6 pack - GREEN

aFL-FuseLC2MsMa6 FuseConnect™,LC,APC,SM,2.0MM, 6 pack - GREEN

aFL-FuseFC9usMu6 FuseConnect™,FC,UPC,SM,900UM, 6 pack - BLUE

aFL-FuseFC9uMM626 FuseConnect™,FC,PC,MM,62.5UM,900UM, 6 pack - BEIGE

aFL-FuseFC9uMM506 FuseConnect™,FC,PC,MM,50UM,900UM, 6 pack - BLACK

aFL-FuseFC9uMM50L6 FuseConnect™,FC,PC,MM,50UM 10GIG, 900UM, 6 pack - AQUA

aFL-FusesT9usMu6 FuseConnect™,ST,UPC,SM,900UM, 6 pack - BLUE

aFL-FusesT9uMM626 FuseConnect™,ST,PC,MM,62.5UM,900UM, 6 pack - BEIGE

aFL-FusesT9uMM506 FuseConnect™,ST,PC,MM,50UM,900UM, 6 pack - BLACK

aFL-FusesT9uMM50L6 FuseConnect™,ST,PC,MM,50UM 10GIG, 900UM, 6 pack - AQUA

aFL-Cs01043706 Clip for LC Duplex FAST & FuseConnect™ connectors

switchcraft eH series - audio/Video/dataThe EH Series by Switchcraft® is a complete line of audio, video, and data connectors built into standard panel-mount XLR housings. Custom combinations of EH Series connectors can be quickly loaded into any BTX Custom Panel. Once mounted, connecting your equipment to the back of an EH Series connector is fast and easy. Most connectors are feed thru, which means standard cabling is simply plugged into the back of your gear, then plugged into the back of the EH Series connector. The fiber options in the EH Series are shown below.

Description Nickel Shell Part Number

Black Shell Part Number

EH Series, SC Fiber Optic Feedthru, Single-mode, Plastic Housing - sWI-eHsC2

EH Series, SC Fiber Optic Feedthru, Multi-mode, Plastic Housing - sWI-eHsC2M

EH Series, ST Fiber Optic Feedthru, Single-mode sWI-eHsT2 sWI-eHsT2B

EH Series, ST Fiber Optic Feedthru, Multi-mode sWI-eHsT2M sWI-eHsT2MB

EH Series, LC Fiber Optic Feedthru, Single-mode, Plastic Housing - sWI-eHLC2

EH Series, LC Fiber Optic Feedthru, Multi-mode, Plastic Housing - sWI-eHLC2M

BtX custom panels for switchcraft eH series

Part # Description

BTX-AVP201BK 16 port, 1 RU empty panel with designation strips and tie-bars

BTX-AVP202BK 32 port, 2 RU empty panel with designation strips and tie-bars

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s9 Signal Processing

gefen Fiber solutionsGefen delivers advanced technology including multi-platform extension switching, distribution and format conversion capabilities.

gefen 3gSdi fiber extender

Extends 3G-SDI using a single ST single-mode cable up to 1.25 miles.

GeF-eXT3GsDIFOsM

gefen 3gSdi fiber extender

Extends SD/HD/3G SDI using a single ST multi-mode cable up to 18 miles.

GeF-eXT3GsDIFO141

gefen hdMi fiber pigtail extender

HDMI fiber pigtail module extender with HDCP support, using a single SC multi-mode cable up to 1,000 feet.

GeF-eXTHDCPFM10

gefen displayport fiber extender

DisplayPort fiber pigtail module extender with DPCD, using a single SC multi-mode cable up to 1,000 feet.

GeF-eXTDPCPFM10

gefen dVi fiber extender

DVI fiber pigtail module extender with HDCP, using a single SC multi-mode cable up to 1,000 feet.

GeF-eXTDVICPFM10


DVI extender over one strand of SC multi-mode cable extends up to 3,300 feet.

GeF-eXTDVIFM1000P


DVI extender with virtual EDID, over one strand of SC multi-mode (OM3) connectivity up to 3,300 feet.

GeF-eXTDVIFM15

gefen USB 2.0 extender with fiber

USB 2.0 extender over fiber extends a duplex LC multi-mode cable up to 1,640 feet.

GeF-eXTusB400FON

gefen hdMi over One fiber with ir extender

All-in-One HDMI, RS232 and IR extension over a single SC multi-mode cable. A reliable and simple solution for extending HDMI up to 1,000 feet (300 meters).

GeF-eXTHDMI131FO

gefen dVi-rS232 extender over One fiber

All-in-One DVI and RS232 extension over a single SC multi-mode cable. A reliable and simple solution for extending DVI and RS232 up to 1,000 feet (300 meters).

GeF-eXTDVIrs2321FO



2013

: Fib

er O

ptic

sO

luti

On

s

10Signal Processing

communications specialties Fiber solutionsThe Pure Digital Fiberlink® Series makes it easier than ever to transmit high resolution RGB and audio or composite video and audio – to the next office or the next building! Digitally transmits high-resolution RGB (up to WXGA) and stereo audio over one fiber.

atlona hdMi, rS232, ir & audio Transmitter

HDMI, RS232, IR and Audio Transmitter module over a single multi-mode fiber with HDCP and EDID support.

atlona hdMi, rS232, ir & audio receiver

HDMI, RS232, IR and Audio Receiver module over a single multi-mode fiber with HDCP and EDID support.

Telecast rattler Transmitter, 1300nm laser, -7dBm out. Mini Fiber Optic Serial Digital Video Transmission Module.

Telecast rattler receiver, -20dBm sensitivity. Mini Fiber Optic Serial Digital Video Transmission Module.

FeaTures � Supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768)

� Supports HDTV resolution of 480p, 720p and 1080i (RGBHV format only)

� Connectors – HD15f (RGBHV), 3.5mm plug (audio), ST (fiber)

FeaTures � Supports DVI-D & DVI-I (Digital Signal Only) single-link resolutions up to 1920 x 1200 at 165 MHz pixel clock and HDTV resolutions of 480p, 1080i, and 1080p (DVI format)

� Only one fiber used - no pixel skewing � Requires no adjustments, equalization or de-skewing during installation � Connector - HD/SDI on BNC (DVI-I digital only), fiber on ST

dVi transmission (up to 1920 x 1200) & stereo audio over one single mode or multi-mode fiber without compression, scaling or adjustments.

RGB + Audio or Composite + Audio over FiberPart # Description

VP-7220B7s Transmitter, WXGA and stereo audio, one fiber,supports both 1310nm MM and 1310nm SM

VP-7221B7s Receiver, WXGA and stereo audio, one fiber, supports both 1310nm MM and 1310nm SM

PW-PDPs1Na Power supply for CSI Fiberlink (required for both transmitters and receivers)

DVI over Fiber

Part # Description

VP-7500B1s Transmitter, DVI and stereo audio, one fiber, supports 850nm MM

VP-7500B7s Transmitter, DVI and stereo audio, one fiber, supports 1310nm SM

VP-7501B1s Receiver, DVI and stereo audio, one fiber, supports 850nm MM

VP-7501B7s Receiver, DVI and stereo audio, one fiber, supports 1310nm SM

PW-PDPs1Na Power supply for CSI Fiberlink (required for both transmitters and receivers)

Kramer Fiber solutionsdVi over fiberThe VP-622T and VP-622R are optical transmitter and receivers for dual link DVI signals with resolutions up to 2560x1600 at 60 Hz. The VP-622T converts a DVI signal into an optical signal and the VP-622R converts the optical signal back to DVI.

sPeCIFICaTIONs � System Range: Up to 100 meters (320') � Input: DVI-D on a DVI-I connector � Output: 8 simplex (or 4 duplex) LC optical connectors - 2 red, 2 green, 2 blue & 2 clock. 1 Cat 5 (RJ45) for DDC and HDCP bi-directional data

� Max data rate: 3.3Gbps � DVI/DVI male to male cable

sPeCIFICaTIONs � System Range: Up to 100 meters (320') � Input:8 simplex (or 4 duplex) LC optical connectors - 2 red, 2 green, 2 blue & 2 clock. 1 Cat 5 (RJ45) for DDC and HDCP bi-directional data

� Output: DVI-D on a DVI-I connector � Max data rate: 3.3Gbps � DVI/DVI male to male cable

Transmitter receiver

Kra-622T Kra-622r

atlona Fiber solutions telecast Fibersolutions

aTL-aTHDF30sIr aTL-aTHDF30rIr

TeL-raTTLerTX TeL-raTTLerrX

Telecast rattler (Transmitter/receiver)

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s11 Fiber Testers & Tools

V-groove Fusion splice KitThe AFL-S014560 fusion splice kit features the AFL-FSM18S Fusion Splicer. This splicer is a low cost, fixed V-Groove, single fiber fusion splicer with the same robust features offered in other high end models. Its new rugged construction adds improved reliability by resisting shock, dust, and rain, and withstands a 30" drop test. Features such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a reliable productivity tool. Software is included with each splicer and provides the user with the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

� AFL-BTR08 Battery � AFL-DCC14 Battery Charge Cord � AFL-CT30A Cleaver � AFL-ADC13 AC Adapter � AFL-ACC14 AC Cord � Spare Electrodes (pair) � Sheath Clamp

KIT INCLuDes: � USB Cable Splicer � Carrying Strap � Quick Reference Guide � Video Instruction Manual � AFL-JP05 Splice Sleeve � Cooling Tray � Transit Case with Carrying Strap

aFL-s014560

� AFL-BTR08 Battery � AFL-DCC14 Battery Charge Cord � AFL-CT30A Cleaver � AFL-ADC13 AC Adapter � AFL-ACC14 AC Cord � Spare Electrodes (pair) � Sheath Clamp

KIT INCLuDes: � USB Cable Splicer � Carrying Strap � Quick Reference Guide � Video Instruction Manual � AFL-JP05 Splice Sleeve � Cooling Tray � Transit Case with Carrying Strap

aFL-s014562

core alignment Fusion splice KitThe AFL-S014562 fusion splice kit features The AFL-FM60S fusion splicer. This unit sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test. The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle timeof only 39 seconds. Features, such as automatic tube heater operation, user-selectable clamping method (sheath clampor fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. Software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

auto-arc calibration portable Fusion splice KitThe AFL-S013988 fusion splice kit features the AFL-FSM11S SpliceMate™. This sophisticated fusion splicer is the world’s smallest and most portable, and is designed to meet the challenges posed by today’s fiber networks. SpliceMate™ fits in the palm of your hand, yet it’s smart and reliable enough to be used with confidence by inexperienced operators. SpliceMates™ advanced intelligence features include two-camera fiber inspection to insure the splice is right and Auto Arc Calibration... an industry first. It’s easy to operate and quickly makes low loss splices with all common types of optical fibers. SpliceMate™ is available with a variety of powering options including a battery pack and adapters to work with AC or DC power sources.

� AFL-FSM11S Fusion Splicer � AFL-FH50250 Fiber Holders � AFL-BTC04 Battery Charger � AFL-BTR07 Battery � AFL-ADC10 Adapter (for BTC-04)

KIT INCLuDes: � AFL-ACC09 Power Cord (for ADC-10) � Spare Electrodes (Pair) � Operation Manual � Transit Case

aFL-s013988



2013

: Fib

er O

ptic

sO

luti

On

s

12Fiber Testers & Tools

Quad otdr and certification test KitsThe AFL-C860 is the most efficient single-mode and multi-mode fiber optic certification OTDR (Tier 2) and loss (Tier 1) test set. It can reduce certification and OTDR costs by up to 50% and can bi-directionally certify two fibers in two directions. Integrated OTDR, OPM, OLS and VFL allow users to complete more tests and generate comprehensive acceptance reports quicker than other options. Touch and Test™ user interface has pass/fail thresholds and auto-test modes to enable technicians to test like a fiber expert. Setup pass/fail criteria for the Tier 1 loss tests and pass/fail criteria for the events in Tier 2 tests, assuring the fibers meet ISO/TIA standards, applications or customer expectations before leaving the job site. The AFL-C860 comes complete with TRM™ (Test Results Manager) certification reporting software at an attractive price/performance ratio.

KeY FeaTures: � Certify and Perform Tier 1 Tests � Bi-directionally measure link loss and length � Save time simultaneously testing two fibers at two wavelengths (MMF 850/1300 nm, SMF 1310/1550 nm)

� Verify polarity � Certify SM and MM networks to industry standards (ISO/TIA/EN) and applications

� Find faults using integrated Visual Fault Locator � Create and test to user defined rules � Review immediate Pass/Fail status including comparison of results to standards and applications

� Review fibers by cable and re-test fiber pairs if needed � Create professional certification reports

aFL-C860

aFl cleaverThe CT-30A Cleaver sets the standard for portability, reliability and ease of use. Used for single fiber applications, this cleaver can be used with all AFL fusion splicers. The CT-30A offers a larger base for a stable platform, excellent visibility when placing the fiber, and three scrap collection options. Designed for excellent portability, the CT-30A is equally at home in a splicing van or in a bucket truck. The 16-position blade yields 48,000 single-fiber cleaves before requiring replacement, and the built-in scrap collector conveniently stores fiber shards until they can be safely discarded. Included with the cleaver is an adapter plate, fiber collector, small and large scrap boxes, an installed side cover and carrying case.

aFL-CT30a

optical loss test setThe AFL-C880 is a fiber optic certification Optical Loss Test Set. The AFL Touch and Test™ is an intuitive visual user interface which simplifies the user experience, reduces training time and testing errors enabling even a technician to get the job done quickly and accurately. With a full Tier 1 set of testing tools including OPM, OLS, VFL and end-face inspection capability the AFL-C880 is a compact solution for fiber network owners and installers. The AFL-C880 comes complete with TRM™ (Test Results Manager) certification reporting software for comprehensive reports compliant to TIA/ISO guidelines.

KeY FeaTures:

� Tier 1 certification to industry standards � ISO/TIA/EN/User setable Pass/Fail thresholds � Touch and Test™ user interface � TRM™ reporting software - Inspection capable

aFL-C880

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s13 Fiber Testers

Visual Fault identifierThe AFL-HILITE is a trouble shooting tool that help technicians quickly locate defects in single-mode or multi-mode fiber optic cable. It features a visible red laser source (650nm), high power (1mW) into 9/125 single-mode fiber and a universal connector interface for quick connection and test to single ferrule connectors such as FC, SC, ST, LC, MU, and more.

aFL-HILITe

Fiber optic loss test KitThe AFL-SMLP55 combines the AFL-OLS4 Quad MM/SM Source with the AFL-OPM5 Power Meter. It can store files and organize data for uploading to a PC. TRM Reporting software (included with kit) is a powerful reporting tool enabling technicians to organize test data, apply test rules for pass/fail analysis, and build custom test reports using included industry accepted templates.

aFL-sMLP55

� Inspection capable � Greater than 8 hours battery life � Touch and Test™ user interface

� TRM™ reporting software � Automatic Pass/Fail analysis (TIA/ISO) � Internal and USB storage (1000s of tests)

KeY FeaTures:

Hand-Held otdrThe NOYES M200 from AFL is a rugged, hand-held and lightweight OTDR for testing multi-mode and single-mode fiber networks. With an integrated visible fault locator and support for the DFS1 Digital FiberScope, the M200 OTDR is well suited for testing, troubleshooting and documenting enterprise, metro and service provider fiber networks. The AFL Touch and Test™ is an intuitive visual user interface, which simplifies the user experience, reduces training time and testing errors enabling even technician to get the job done quickly and accurately. The unit comes complete with TRM™ (Test Results Manager) certification reporting software for comprehensive reports compliant to TIA/ISO guidelines.

aFL-M20025

FeaTures � One green LED indicator shows the operating mode

� Power switch located on the end for battery on / off

� Push button operate CW / Mod. (2-3 Hz frequency) / pause

� Clip pocket-size pen design

pen shaped Visual Fault locator

Part # DescriptionBTX-FO300VFL25 Visual Fault Locator, Universal 2.5mmBTX-FO300VFL125 Visual Fault Locator, Universal 1.25mmBTX-FO300VFLa 1.25mm Adapter - for use on 2.5mm VFL



2013

: Fib

er O

ptic

sO

luti

On

s

14Fiber Testers

optical microscopeThe NOYES OFS 300 from AFL is a versatile Optical Fiber Scope with precision 200X magnification. This handheld and rugged scope is used for inspection of optical fiber connectors for scratches, dirt, or other problems normally associated with poor transmission performance. It features a built-in laser safety filter that provides >40 dB IR protection, and accepts a variety of NOYES thread-on style adapter caps for inspection of most industry standard connectors.

aFL-OFs300200C

FeaTures � 200X and 400X versions � Interchangeable adapters � Pressure activated on/off switch � Single hand focus wheel � Standard battery operation � Handheld Inspection Scope � Compact and easy to carry

� Perfect for field kits � Inspect multiple ferrule sizes with interchangeable tips � Sold separately or in hard case cleaning kits

Handheld inspection scope

Part # DescriptionBTX-FO301 200X Handheld Scope w/ 2.5mm tipBTX-FO302 400X Handheld Scope w/ 2.5mm tip BTX-FO303 1.25mm tip

FeaTures � Dual microscopes (built-in and probe) enable rapid inspection of patch cords and in bulkhead adapters at the flip of a switch

� A large 3.5" built-in display screen � USB2.0 connection for viewing, capture and documentation on Windows® based PCs and notebooks

� Easy-to use software included. Optional Pass/Fail software available � Replaceable cleaning cassette attached � Ruggedized cover � AC or rechargeable AA battery operation for use in any location � Universal UPC and APC tips available for built-in microscope

Viewconn® plusThe BTX-FO6200PL is a portable hand-held video microscope, ruggedized for field use, for inspecting and cleaning fiber optic connector endfaces. The dual microscope operation significantly reduces inspection time allowing inspection of both patchcord and bulkhead adapters without changing tips. For SM & MM connectors.

PaCKaGe INCLuDes: The 6200 unit, 2 universal tips, AC adapter/battery charger w/ rechargeable batteries, USB mini-B cable w/ ConnectorView software, and 2 cleaning cassettes. CI-1100 probe and tips for PC type SC, FC and LC female (in-adapter) connectors.

BTX-FO6200PL ViewConn 6200-PL Standard Package

continuity testerConnect an ST connector into the front end. Unit sends red LED light down fiber providing easy continuity verification at the other end. Also ideal for identification in bundled Distribution cable. Operates on 2 “C” size batteries (not included).

Part # Description

TV-FO5000 Continuity Tester

TV-FOPFL Pocket fault locator

improve repeatability and consistency of multi-mode optical loss testing with Multimode fiber Mandrels.

The mandrel wrap mode filters are used to improve loss testing accuracy on multi-mode optical fiber. They comply with standard TIA/EIA-568-B.1 Clause 11.3.3, when used with the multi-mode launch kit and 50 or 62.5μm core fiber.

red - for 50um fiber with 2-3mm jacket

grey - for 62.5um fiber with 2-3mm jacket

multimode mandrels

BTX-FO300MMMM Mandrel set1pc each for 50 & 62.5 fiber

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s15 Fiber Accessories

This connector curing heat oven allows proper curing of several types of epoxy. The oven block accom-modates a variety of connector styles including ST, FC, SC, D4, LC, MU and SMA. Its front panel features temperature control, power “on” and heat “on” light indicators. The block provides even heat distribution, minimizing connector heat loss. Temperature range is ambient to 320°F / 160°C.

curing oven

BTX-FO324 Fibertron MultiCure 24 Port Oven

Cleaves multi-mode and single-mode. Blade has lifetime of 6000+ cleaves, with 90% less than 1° and 99% less than 2°.

cleaver

TV-FO116000 Multimode and single-mode cleaver

Round cable splitter handles cable OD up to 1.5" with an adjustable blade to cut jacket thickness up to 0.187".

round cable splitter

TV-FO124 Round cable splitter

These steel sleeves are used to slide over the ferrule to help prevent the fiber breaking when placed in the oven to cure. Available in 1.25mm and 2.5mm versions. Sold in packs of 12.

Fiber protectors

Part # Description

BTX-FO304 Fibertron Fiber protector for 1.25mm ferrules, 12pc/Pack

BTX-FO305 Fibertron Fiber protector for 2.5mm ferrules, 12/pc/Pack

Fiber optic splice

3M Universal spliceOne size fits all splice requires no adhesive, polishing, or special tools. Losses of <0.5dB are typical.

BTX-FO306 Universal Fiber Optic Splicer. Losses of <0.5dB are typical.



2013

: Fib

er O

ptic

sO

luti

On

s

16Fiber Accessories

Multi-functional fiber optic stripper removes outer jacket, buffer only or buffer and acrylate from 2.0-3.0 mm cable.

Fiveroptic™ stripper

BTX-FO310 Multi-functional fiber optic stripper

These shears are equipped with serrated, high-carbon stainless steel blades designed to cut Kevlar, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability.

Wire & Kevlar cutting shears

BTX-FO308 Jonard Wire & Kevlar Cutting Shears

This scribe has a super wide blade for positive scoring. Double ended blade maximizes the life of the tool. Comfortable, secure grip for long term use. Cap stores on the back of the handle. 30° ruby blade

Fiber scribe

BTX-FO307 Economy Ruby Blade Fiber Optic Scribe

This Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900um buffer coating. The second hole strips the 600-900um buffer coating down to the 250 micron coating and the third hole is used to strip the 250um cable down to the glass fiber without nicks or scratches.

3-Hole Jacket & Buffer strip

BTX-FO309 Fiber Optic Stripper - 3-Hole

TV-Pa1511 Kevlar Cutter

Cut protective Kevlar strands in fiber optic cable. Hard-chromed serrated edges to easily cut through Kevlar. Comfortable handles with large finger openings

Kevlar cutter

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s17 Fiber Consumables

The new ‘S’ style CleTop features all the benefits of the old style CleTop but with the open button on top, an ESD compliant plastic case and replacement tape in an easy to install drop-in style cartridge.

BTX-FO313 CleTop-S (A) - for 2.5mm

BTX-FO314 CleTop ‘S’ Connector Cleaner Replacement Cartridge (Blue) Type A

cletop Ferrule cleaners The OPTIPOP R is a cassette style fiber optic connector cleaner system that can be refilled, reducing cleaning costs.

BTX-FO315 OPTIPOP R Cassette – Single Slot

BTX-FO316 OPTIPOP R Cassette – Two Slot

BTX-FO317 OPTIPOP Refill - 6 Pack

optipop Ferrule cleaners

5.75" square polishing padHand polishing processes make use of hard and soft pads depending on the desired type of polish.

polishing Films for polishing machines

Part # DescriptionBTX-FO321 Silicon Carbide 15um polishing film 6"x 6"

BTX-FO322 Piranha Diamond Lapping Film 9um 6"x 6"



BTX-FO326 Piranha Silicon Dioxide Final Polish Film 6"x 6"

BTX-FO320 5.75 Hand Polish Pad ( 5.75" ) 1/8" Thick, 70 Durometer

One-Click Cleaners The AFL One-Click Cleaner is an easy-to-use option for cleaning fiber connectors. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. Each cleaner provides 500 cleans.

aFL-8500050001MZ SC, ST and FC connectors

aFL-8500050002MZ LC and MU connectors

Fiber optic cleaner

Two component, solid heat curing epoxy designed for high temperature applications. Ideal for bonding fiber optics, glass, ceramics and most plastics. Is recommended for mass production of most single-mode and multi-mode terminations.

piranha epoxy

BTX-FO311 Epoxy - 25pc/set, Heat Cure, Extended Working Life, 2-Part Epoxy, 2 Gram TwinPackage

BTX-FO312 Syringe - 100pc/set 3cc Application Syringe with a 1.5”, 20 Gauge Needle

Fiber optic WipesKim WipesEach box contains 280 tissues.Recommended for use with alcohol to clean fiber connector faces.

IN-FOKW Kim Wipes

IN-FOKW12 Kim Wipes Box of 12

BTX-FO404 Non-woven fiber wipes, 300pcs

Hand polishing puck

BTX-FO318 Universal Hand Polishing Puck

BTX-FO319 Ideal Metal Hand Polishing Fixture

The Universal hand polishing puck polishes many different connector types with a 1.25mm or 2.5mm ferrule, including duplex configurations and as many as three ferrules at once. The Ideal stainless steel polishing fixture polishes ST and SC type connectors. Precision machined stainless steel disk provides accurate polishing angle for desired endface finish.

Fiber trash canDisposable Fiber Scraps Trash Can with mounting base can be incinerated when full.

canned air & isopropyl alcoholCanned air & isopropyl alcohol(can only ship ground)

BTX-FO327 Fiber Scraps Trash Can IN-FOaIr1 Canned Air



2013

: Fib

er O

ptic

sO

luti

On

s

18Installation Aids

Breakout Box solutions

opticalCON® Duo SeriesBTX-BX2LC opticalCON Duo to (2) LC Female Standard Box

BTX-BX2LCr opticalCON Duo to (2) LC Female 19" Rackmount Box, 1U

BTX-BX2sC opticalCON Duo to (2) SC Female Standard Box

BTX-BX2sCr opticalCON Duo to (2) LC Female 19" Rackmount Box, 1U

BTX-BX2sT opticalCON Duo to (2) ST Female Standard Box

BTX-BX2sTr opticalCON Duo to (2) ST Female 19" Rackmount Box, 1U

opticalCON® Duo Hybrid SeriesBTX-BX2LCXLr opticalCON Duo Hybrid to (2) LC Female and (1) 4 Pin XLR - Standard Box

BTX-BX2LCXLrr opticalCON Duo Hybrid to (2) LC Female and (1) 4 Pin XLR - 19" Rackmount Box, 1U

BTX-BX2sCXLr opticalCON Duo Hybrid to (2) SC Female and (1) 4 Pin XLR - Standard Box

BTX-BX2sCXLrr opticalCON Duo Hybrid to (2) SC Female and (1) 4 Pin XLR - 19" Rackmount Box, 1U

BTX-BX2sTXLr opticalCON Duo Hybrid to (2) ST Female and (1) 4 Pin XLR - Standard Box

BTX-BX2sTXLrr opticalCON Duo Hybrid to (2) ST Female and (1) 4 Pin XLR - 19" Rackmount Box, 1U

opticalCON® QUAD SeriesBTX-BX4LC opticalCON QUAD to (4) LC Female – Standard Box

BTX-BX4LCr opticalCON QUAD to (4) LC Female - 19" Rackmount Box, 1U

BTX-BX4sC opticalCON QUAD to (4) SC Female – Standard Box

BTX-BX4sCr opticalCON QUAD to (4) SC Female - 19" Rackmount Box, 1U

BTX-BX4sT opticalCON QUAD to (4) ST Female – Standard Box

BTX-BX4sTr opticalCON QUAD to (4) ST Female - 19" Rackmount Box, 1U

BTX offers a wide variety of standard and custom opticalCON® fiber breakout boxes. These breakouts are available in many form factors, including standard boxes, floor boxes or rack panels. All fiber and metal work are done in-house, allowing for unique customizable options, fast turnaround, and exceptional pricing.

opticalCON Duo to (2) LC

opticalCON QUAD to (4) LC *Custom Configurations are available

Breakout Box Configurations

Hook & loop cable ties

Black # Red # Orange # Yellow # Green # Blue # Length Width Tensile Strength Bundle Dia. Write-On

Area Qty.

IN-GT50X60 IN-GT50X62 IN-GT50X63 IN-GT50X64 IN-GT50X65 IN-GT50X66 6" 0.50" 45 lbs. 1.00" n/a 100




IN-GT50X60W - (Write-On cable ties are only available in black with white writing space) 6" 0.50" 45 lbs. 1.00" 3/8" x 1-1/4" 100



These hook & loop cable ties are available in packs of 100. The ones with write-on capability provides an area approximately 3/8"h x 1-1/4"w, positioned in the center of the strap for writing labels.

BTX FIBER TIP

don’t use wire ties, use Velcro. a must in fiber applications.

voice: 800.666.0996 fax: 800.569.4244

Beyond Distribution

2013

: Fib

er o

ptic

so

luti

on

s19 Plug-and-Play Fiber Solutions

te connectivity plug-and-play Fiber solutions

Tfp plug-and-play CassettesTE Connectivity’s TrueNet Fiber Panels (TFP) plug-and-play cassettes combine the unique features of vertical cable guides and the patented angle-left/angle right adapters, which offers bend radius protection, intuitive routing and easy connector access. Designed for rack or cabinet mounting in the horizontal or equipment Distribution area, the TFP’s modularity, functionality and density makes them ideal for mounting in close proximity to servers, switches, routers and SANs.

FeaTures � Eliminated the need for on-site fiber terminations, which means rapid deployments

� Incorporates angle left/angle right adapters to ensure proper bend radius

� Uses the same 1, 2, and 5 rack unit standard TFP chassis, which simplifies ordering


aDC-TFP12MPLDQ2 12 Fiber, 6 LC (aqua) multi-mode adapters; 50/125 fiber laser optimized to 300 meters - Angle Left

aDC-TFP12MPrDQ2 12 Fiber, 6 LC (aqua) multi-mode adapters; 50/125 fiber laser optimized to 300 meters - Angle Right

aDC-TFP12MPLsQ5 12 Fiber, 6 LC single-mode adapters; single-mode fiber -Angle Left

aDC-TFP12MPrsQ5 12 Fiber, 6 LC single-mode adapters; single-mode fiber -Angle Right

aDC-TFP24MPLDQ2 24 Fiber, 12 LC (aqua) multi-mode adapters; 50/125 fiber laser optimized to 300 meters - Angle Left

aDC-TFP24MPrDQ2 24 Fiber, 12 LC (aqua) multi-mode adapters; 50/125 fiber laser optimized to 300 meters - Angle Right

aDC-TFP24MPLsQ5 24 Fiber, 12 LC single-mode adapters; single-mode fiber -Angle Left

aDC-TFP24MPrsQ5 24 Fiber, 12 LC single-mode adapters; single-mode fiber -Angle Right

TrueNet 12 fiber plug and play array CablesTE Connectivity’s TrueNet® 12-Fiber Plug-and-Play Array Cables provide a convenient and efficient method to connect active equipment into the network. These 12-fiber round 3 mm cables contain a preterminated high density MPO pinned connector on one end and either LC or SC connectors on the other. The TrueNet 12-Fiber Plug-and-Play Array Cable assemblies can simply be plugged into any plug-and-play cassette listed above which eliminates the need for on-site fiber termination and preparation.

FeaTures � Round design with outer diameter of 3 mm eliminates preferential bend issues which results in increased density and greater manageability

� Each LC or SC leg clearly labeled and identified � Standard breakout length 18-inches, which is optimum to connect to active equipment

� LC version features ADC patented clear LC duplex clip for easy removal in field


50/125 LOMMF to 300 meters Cable assemblies - OFNP rated

aDC-MrMaMOPJG003M18 MPO pinned - LC; 18 in breakout; 3 meter



aDC-MrMaMO9JG003M18 MPO pinned - SC; 18 in breakout; 3 meter



single-mode elite Cable assemblies - OFNP rated

aDC-MrMaMOKJG003M18 MPO pinned - LC/UPC; 18 in breakout; 3 meter



aDC-MrMaMO7JG003M18 MPO pinned - SC/UPC; 18 in breakout; 3 meter



partial line cardA

ll na

mes

and

trad

emar

ks a

re th

e pr

oper

ty o

f the

ir re

spec

tive

owne

rs.

proViding tHe Value tHat Brings

it all togetHer

BtX technologies, inc.5 Skyline Drive, Hawthorne, New York 10532 (Headquarters & Distribution Hub)

3130 West California Avenue, Salt Lake City, Utah 84104 (Distribution Hub)

www.btx.com | [email protected]

business hours:

8:30 a.m. – 7:00 p.m. et or visit our website and order 24 hours a day, 7 days a week!

phone:

800.666.0996 or 914.592.1800fax:800.569.4244 or 914.592.0800

2013 fiber Catalog$8.00 | All catalog information subject to change without notice. ©2013 BTX Technologies, Inc. ALL RIGHTS RESERVED all trademarks are the property of their respective owners.

Documents

2013 Fiber Solutions Catalog