2013-14 Automotive Fluid Transfer Systemspbwdist.com/catalogs/AGS auto fluid transfer systems-2013-14.pdf · Copper brazed bond Electric Zinc Plating Double-Wall Close tolerance,

TUBING & HOSE REPAIR SPECIALTIES

BRAKE, FUEL, TRANSMISSION LINES

TUBE NUTS, UNIONS, & ADAPTER FITTINGS

MERCHANDISING ASSORTMENTS & DISPLAYS

OIL DRAIN PLUGS, GASKETS, & SPECIALTY TOOLS

LUBRICANTS & CHEMICALS

TUBING & HOSE REPAIR SPECIALTIES

BRAKE, FUEL, TRANSMISSION LINES

TUBE NUTS, UNIONS, & ADAPTER FITTINGS

MERCHANDISING ASSORTMENTS & DISPLAYS

OIL DRAIN PLUGS, GASKETS, & SPECIALTY TOOLS

LUBRICANTS & CHEMICALS

Transfer Systems Automotive Fluid

Connecting & Fastening Solutions Guide

Transfer Systems Automotive Fluid

Connecting & Fastening Solutions Guide

2013-142013-14

Information

Domestic Lines• Brake, Fuel, TransmissionImport Lines• Japanese, British, European, 6mmAdapter Brake Lines• 3/16”, 1/4”, 6mmFloor & Wall Displays Coiled Tubing

Fittings• Tube Nuts, Unions, & Adapters Fitting AssortmentsACCUFIT™ Oil Drain Plugs• Oil Drain Plugs, Gaskets, Repair Plugs, and AssortmentSpecialty Tools• Wrenches, Flaring Tool, Fitting Gauges, and Tubing Repair Line Repair Systems

Lubricants & Chemicals

TABLE OF CONTENTS PAGE34

5

10–11

20-22

12–19

22-26

27-30back

6–7

8–9

3

INFORMATION

The braking system is a critical component of any vehicle and literally controls the safety of drivers, passengers, and anyone else sharing the road. The tubing which carries the braking fluid between the master cylinder and the slave cylinders at the wheels is a vital part of this system. This tubing is extremely susceptible to the high-pressure it must handle (during braking) and the environment (adverse weather, road treatments, and road debris) to which it is continuously exposed. AGS lines and coils are made of the most advanced materials and processes available today. Our tubing construction and coatings allow for the most workable, corrosion resistant, and safest product possible. In addition, the quality of the flares (end-forms) and tube nuts of all AGS lines meet and exceed standards for the best seal possible. While the vast majority of vehicles utilize 3/16", 1/4", or 6mm diameter tubing for brake applications, all AGS lines offer the same advanced construction and technology. For a complete explanation of the braking system go to www.agscompany.com.

All AGS tubing conforms to the following:

• Wall thickness = .028 (.70mm)• Elongation in 2" (50mm) = 14%• Hardness (Rockwell 30T Scale): 65• Clean finish inside and out• Leak and vibration resistance • Specifications: SAE J527b DIN 74234 SAE J1290 ISO 4038 SAE J1650 GM123M ASTM A254

BRAKING SYSTEM

BRAKE, FUEL, & TRANSMISSION TUBING SPECIFICATIONS

Copper brazedbond

Electric ZincPlating

Double-WallClose tolerance,low carbon roll-formed steel

Beveled seam edgesfor smooth, bead-free joint

Brazed CopperCoating

• Double-Walled• Low Carbon Steel

• Copper Brazed• Zinc Undercoating

STANDARD STEEL

Example Yield Strength(0.2% offset)O.D. Tensile

StrengthSize

300 Series400 Series500 Series600 Series700 Series300 CN Series400 CN Series500 CN Series600 CN Series

BL-308 or PA-308BL-408 or PA-408BL-508 or PA-508BL-608 or PA-608BL-708 or PA-708CNC-325CNC-425CNC-525CNC-625

3/16" (4.76mm)1/4" (6.35mm)5/16" (8.00mm)3/8" (9.53mm)6mm (.236")3/16" (4.76mm)1/4" (6.35mm)5/16" (8.00mm)3/8" (9.53mm)

24,656 PSI24,656 PSI24,656 PSI24,656 PSI24,656 PSI15,229 PSI15,229 PSI15,229 PSI15,229 PSI


Working Pressure4,500 PSI3,000 PSI2,300 PSI1,800 PSI3,300 PSI4,200 PSI2,900 PSI2,100 PSI1,700 PSI

Burst Pressure


Copper brazedbond

Poly-Armour®

PVF Coating

Electric Zinc plating

Double-WallClose tolerance,low carbon roll-formed steel

Beveled seam edgesfor smooth, bead-free joint

Brazed CopperCoating

• Double-Walled• Low Carbon Steel• Copper Brazed

• Zinc Undercoating• PVF Coated• EZ-Bend Technology

POLY-ARMOUR®

E-ZE-ZE-Z BENDBENDBENDT E C H N O L O G Y

®

Master Cylinder

Slave Cylinder

Brake Line

90-10 COPPER NICKEL

Cold Drawn & Annealed Copper Nickel Alloy

• Single-Walled• 90-10 Copper Nickel Alloy

EZ-BEND ® Technology refers to the combined features of the AGS Poly-Armour ® lines and coils that make them easy to work with and bend. In the case of 3/16" diameter lines and coils, bending tools are not even necessary. All lines and coils (including AGS Standard Steel) are kink-proof and will retain shape after bending.

* Working and burst pressures calculated using the conservative Barlow’s Formula. Tensile strength was used to indicate material strength and a safety factor of 4 was used to find working pressure.

DOMESTIC LINE – SAE INVERTED FLARE

Poly-ArmourCatalog No.

PA-308PA-312PA-320PA-330

PA-340-5/PA-340PA-351-5/PA-351PA-360-5/PA-360

PA-372

NiCoppCatalog No.

CN-308CN-312CN-320CN-330

CN-340-5/CN-340CN-351-5/CN-351CN-360-5/CN-360CN-372-5/CN-372

StandardCatalog No.

BL-308BL-312BL-320BL-330BL-340BL-351BL-360BL-372

Description

3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"3/16" X 72"

Lines per Tube

10101010

5 / 105 / 105 / 105 / 10

Edelmann No.

308ST312ST320ST330ST340ST351ST360ST

372PVF

Weatherhead No.

S308S312S320S330S340S351S360

–

3/8-24 SHORT (BLF-12)

3/16" O.D.

1/4" O.D.

3/8-24 LONG (BLF-10)

BRAKE LINE FOR DOMESTIC VEHICLESBLF-10 AND BLF-12BLU-3

APPLICATION:FITTINGS:

UNION:


PA-408PA-412PA-420PA-430

PA-440-5/PA-440PA-451-5/PA-451PA-460-5/PA-460

PA-472

StandardCatalog No.


Description

1/4" X 8"1/4" X 12"1/4" X 20"1/4" X 30"1/4" X 40"1/4" X 51"1/4" X 60"1/4" X 72"

Lines per Tube

10101010

5 / 105 / 105 / 105 / 10

Edelmann No.


472PVF

Weatherhead No.

S408S412S420S430S440S451S460

–

7/16-24 SHORT (BLF-13) 7/16-24 LONG (BLF-16)

BRAKE LINE FOR DOMESTIC VEHICLESBLF-13 AND BLF-16BLU-4


UNION:

5/16" O.D.


PA-508PA-512PA-520PA-530PA-540PA-551PA-560PA-572

StandardCatalog No.


Description

5/16" X 8"5/16" X 12"5/16" X 20"5/16" X 30"5/16" X 40"5/16" X 51"5/16" X 60"5/16" X 72"

Lines per Tube

55555555

Edelmann No.


572PVF

Weatherhead No.

S508S512S520S530S540S551S560

–

1/2-20 (BLF-14) 1/2-20 (BLF-14)

FUEL & TRANSMISSION LINE FOR DOMESTIC VEHICLESBLF-14BLU-5

APPLICATION:

FITTINGS:UNION:

FUEL & TRANSMISSION LINE FOR DOMESTIC VEHICLESBLF-15BLU-6

APPLICATION:

FITTINGS:UNION:

3/8" O.D.



StandardCatalog No.


Description

3/8" X 8"3/8" X 12"3/8" X 20"3/8" X 30"3/8" X 40"3/8" X 51"3/8" X 60"3/8" X 72"

Lines per Tube

44444444

Edelmann No.


672PVF

Weatherhead No.

S608S612S620S630S640S651S660

–

5/8-18 (BLF-15) 5/8-18 (BLF-15)

4

DOMESTIC LINES

®

NiCoppCatalog No.

CN-408CN-412CN-420CN-430

CN-440-5/CN-440CN-451-5/CN-451CN-460-5/CN-460CN-472-5/CN-472

NiCoppCatalog No.

CN-508CN-512CN-520CN-530CN-540CN-551CN-560CN-572

NiCoppCatalog No.

CN-608CN-612CN-620CN-630CN-640CN-651CN-660CN-672

®

®

®

3/16”3/16”

5/16”5/16”

3/8”3/8”

1/4”1/4” DOMESTIC LINE – SAE INVERTED FLARE



5

JAPANESE LINE – SAE INVERTED FLARE/METRIC

StandardCatalog No.

BLJ-308BLJ-312BLJ-320BLJ-330BLJ-340BLJ-351BLJ-360

StandardCatalog No.

BLB-308BLB-312BLB-320BLB-330BLB-340BLB-351BLB-360

StandardCatalog No.

BLE-308BLE-312BLE-320BLE-330BLE-340BLE-351BLE-360BLE-372BLE-384


PAJ-308PAJ-312PAJ-320PAJ-330PAJ-340PAJ-351PAJ-360

Description

3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"

Lines per Tube

5555555

Edelmann No.

4308ST4312ST4320ST4330ST4340ST4351ST4360ST

Weatherhead No.

SJ308SJ312SJ320SJ330SJ340SJ351SJ360


PAE-308PAE-312PAE-320PAE-330PAE-340PAE-351PAE-360PAE-372 PAE-384

Description

3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"3/16" x 72" 3/16" x 84"

Lines per Tube

555555555

Edelmann No.

6308ST6312ST6320ST6330ST6340ST6351ST6360ST

––

Weatherhead No.

SC308SC312SC320SC330SC340SC351SC360

––


PAB-308PAB-312PAB-320PAB-330PAB-340PAB-351PAB-360

Description

3/16" X 8"3/16" X 12"3/16" X 20"3/16" X 30"3/16" X 40"3/16" X 51"3/16" X 60"

Lines per Tube

5555555

Edelmann No.

5308ST5312ST5320ST5330ST5340ST5351ST5360ST

Weatherhead No.

SB308SB312SB320SB330SB340SB351SB360

BRITISH LINE – ISO BUBBLE FLARE

EUROPEAN LINE – ISO BUBBLE FLARE/METRIC

M10 X 1.0 LONG (BLF-40)

3/16" O.D.

3/16" O.D.

3/16" O.D.

M10 X 1.0 LONG (BLF-40)

BRAKE LINE FOR JAPANESE VEHICLESBLF-40BLU-9


UNION:

3/8-24 (BLF-38) 3/8-24 (BLF-38)

BRAKE LINE FOR BRITISH VEHICLESBLF-38BLU-7


UNION:

M10 X 1.0 (BLF-39) M10 X 1.0 (BLF-39)

BRAKE LINE FOR EUROPEAN VEHICLESBLF-39BLU-8


UNION:

IMPORT LINES

®

®

®

3/16”3/16”

3/16”3/16”

3/16”3/16”

BRAKE LINE FOR SOME GM VEHICLES (SATURN, CADILLAC)BLF-51BLU-10

APPLICATION:

FITTINGS:UNION:

StandardCatalog No.



Description

6mm X 8"6mm X 12"6mm X 20"6mm X 30"6mm X 40"6mm X 51"6mm X 60"6mm X 72"

Lines per Tube

55555555

Edelmann No.

708PVF712PVF720PVF730PVF740PVF751PVF760PVF772PVF

Weatherhead No.

––––––––

GM LINE – ISO BUBBLE FLARE/METRIC

6 mm O.D.

M12 X 1.0 (BLF-51) M12 X 1.0 (BLF-51)

®

6mm6mm


NiCoppCatalog No.

CNJ-308CNJ-312CNJ-320CNJ-330CNJ-340CNJ-351CNJ-360

NiCoppCatalog No.

CNB-308CNB-312CNB-320CNB-330CNB-340CNB-351CNB-360

NiCoppCatalog No.

CNE-308CNE-312CNE-320CNE-330CNE-340CNE-351CNE-360

––

8" ADAPTER BRAKE LINES3/16”3/16”3/16" O.D.

ADAPTER BRAKE LINES

6

Description

3/8-24 SAE Inverted to M10 x 1.0 SAE Inverted

Lines per Tube

5

Edelmann No.

911PVF

Nut Color

Brass

3/8-24 (BLF-12) M10 x 1.0 (BLF-40)


PAA-O310

StandardCatalog No.

BLA-O310

3/16" O.D.

Description

3/8-24 SAE Inverted to M11 x 1.5 ISO Bubble

Lines per Tube

5

Edelmann No.

914PVF Yellow

3/8-24 (BLF-12) M11 x 1.5 (BLF-47)


PAA-Y311

StandardCatalog No.BLA-Y311

3/16" O.D.

Description


Lines per Tube

5

Edelmann No.

910PVF Blue

3/8-24 (BLF-12) M12 x 1.0 (BLF-48)


PAA-B312

StandardCatalog No.BLA-B312

3/16" O.D.

Description


Lines per Tube

5

Edelmann No.

912PVF Olive

3/8-24 (BLF-12) M13 x 1.5 (BLF-49)


PAA-O313

StandardCatalog No.BLA-O313

AGS 8" adapter brake lines allow dissimilar connections to be made within the same system. Adapter lines are available in common brake line tube sizes 3/16", 1/4", and 6mm. AGS offers OE matching lines. ISO/Bubble to SAE/Inverted, English thread to Metric thread, and enlarging/reducing lines.

*Adapts Japanese port to a standard 3/16" Domestic brake system

*Adapts metric bubble flare to a standard 3/16" Domestic brake system.



3/16" O.D.

3/8-24 (BLF-12) 7/16-24 (BLF-11)


PAA-R340

StandardCatalog No.BLA-R340

*Adapts 1/4" Domestic port to a standard 3/16" Domestic brake system.

3/16" O.D.

3/8-24 (BLF-12) 1/2-20 (NA)


PAA-R350

StandardCatalog No.BLA-R350


3/16" O.D.

Poly-ArmourCatalog No.PAA-O380


3/8-24 (BLF-12) M10 x 1.0 (BLF-39)

*Adapts European port to a standard 3/16" Domestic brake system.

3/16" O.D.


PAA-G360

StandardCatalog No.BLA-G360

NiCoppCatalog No.CNA-G360

NiCoppCatalog No.CNA-O380

NiCoppCatalog No.CNA-R340

NiCoppCatalog No.CNA-R350

Description

3/8-24 SAE Inverted to 1/2-20 SAE Inverted

Lines per Tube

5

Edelmann No.

338STA

3/8-24 (BLF-12) 1/2-20 (BLF-41)


Nut Color

Nut Color

Nut Color

Description


Lines per Tube

5

Edelmann No.

318PVF Red

Nut Color

Description


Lines per Tube

5

Edelmann No.

328STA Black

Nut Color

Green

Nut Color

Description


Lines per Tube

5

Edelmann No.

913PVF Olive

Nut Color

8" ADAPTER BRAKE LINES (Continued)3/16”3/16”

8" ADAPTER BRAKE LINES

8" ADAPTER BRAKE LINES

6mm O.D.

6mm O.D.

7

ADAPTER BRAKE LINES

3/16" O.D.

1/4" O.D.

1/4" O.D.

1/4" O.D.


PAA-B410


NiCoppCatalog No.CNA-B410

NiCoppCatalog No.CNA-S420

NiCoppCatalog No.CNA-O370

NiCoppCatalog No.CNA-B430

7/16-24 (BLF-13) 9/16-18 (BLF-43)


PAA-S420

StandardCatalog No.BLA-S420

7/16-24 (BLF-13) 1/2-20 (BLF-44)


PAA-B430


7/16-24 (BLF-13) 7/16-24 (BLF-13)


PAA-B710


Description

M12 x 1.0 ISO Bubble to M14 x 1.5 ISO Bubble

Lines per Tube

5

Edelmann No.

915PVF Black

M12 x 1.0 (BLF-51) M14 x 1.5 (BLF-53)


PAA-B720


Description

M12 x 1.0 ISO Bubble to M12 x 1.5 ISO Bubble

Lines per Tube

5

Edelmann No.– Olive

M12 x 1.0 (BLF-51) M12 x 1.5 (BLF-52)


PAA-O370


3/8-24 (BLF-12) 9/16-18 (BLF-42)

*Adapts 9/16-18 port to a standard 3/16" Domestic brake system.

*Adapts 9/16-18 port to a standard 1/4" Domestic brake system.

*Adapts non-standard metric bubble to standard 6mm brake system.

*Adapts non-standard metric bubble to standard 6mm brake system.

*Connects 5/16" Domestic port to a 1/4" Domestic brake system.

*Connects 1/4" Domestic port to a 1/4" Domestic brake system.

Description


Lines per Tube

5

Edelmann No.

348STA Olive

Nut Color

Description


Lines per Tube

5

Edelmann No.

418STA Blue

Nut Color

Description


Lines per Tube

5

Edelmann No.

428STA Brass

Nut Color

Nut Color

Nut Color

1/4”1/4”

6mm6mm

Description


Lines per Tube

5

Edelmann No.

438PVF Silver

Nut Color

FLOOR DISPLAYSPoly-ArmourCatalog No.

PAD-1*PAD-2PAD-3PAD-4PAD-6

StandardCatalog No.

BLD-1*BLD-2BLD-3BLD-4

Description

Floor Display – (No Lines or Tubes)Floor Display – Domestic/Import/Adapter LinesFloor Display – Domestic LinesFloor Display – Import LinesFloor Display – Domestic/Import/6mm/Adapters

Dimensions With LinesHeight x Width x Depth

30" x 11" x 18"63" x 27" x 18"63" x 11" x 18"63" x 11" x 18"63" x 33" x 18"

8

FLOOR & WALL DISPLAYS

®

WALL DISPLAYS

WALL DISPLAYS

DescriptionStandardCatalog No.

BLD-14BLD-15BLD-18BLD-19BLD-20BLD-21 – –BLD-24BLD-26BLD-28

Wall Display – Domestic (No Lines)Wall Display – Import (No Lines)Wall Display – 6mm LinesWall Display – Domestic LinesWall Display – Import LinesWall Display – Domestic & Import LinesWall Display – Domestic Lines (Installer Assortment)Wall Display – Import Lines (Installer Assortment)Wall Display – 6mm (No Lines)Wall Display – Adapter LinesWall Display – Adapter (No Lines)

Dimensions With LinesHeight x Width x Depth

10" x 24" x 6"10" x 17" x 3"69" x 7" x 6"69" x 24" x 6"69" x 17" x 3"69" x 42" x 6"69" x 24" x 6"69" x 17" x 6"9.5" x 7" x 6"16" x 7" x 6"10" x 7" x 6"

H

W D

H

W D

PAD-2 (PAD-3 + PAD-4 + ADAPTERS)

PAD-6 (PAD-3 + PAD-4 + ADAPTERS + 6mm)

PAD-3 PAD-4 PAD-26

CND-15PAD-20PAD-19 PAD-21 (PAD-19 + PAD-20)

DIMENSIONAL DATAFLOOR DISPLAYS

WALL DISPLAYS

PAD-18

–

–

–––––––

CND-28

CND-14CND-15


®

PAD-14PAD-15PAD-18PAD-19PAD-20PAD-21PAD-22PAD-23PAD-24PAD-26PAD-28

NiCoppCatalog No.

* Comes as 1 floor display for either import or domestic lines.

StandardCatalog No.

PA-308PA-312PA-320PA-330PA-340PA-351PA-360PA-408PA-412PA-420PA-430PA-440PA-451PA-460PA-508PA-512PA-520PA-530PA-540PA-551PA-560PA-608PA-612PA-620PA-630PA-640PA-651PA-660PA-708PA-712PA-720PA-730PA-740PA-751PA-760

PAB-308PAB-312PAB-320PAB-330PAB-340PAB-351PAB-360PAE-308PAE-312PAE-320PAE-330PAE-340PAE-351PAE-360PAJ-308PAJ-312PAJ-320PAJ-330PAJ-340PAJ-351PAJ-360

PAA-B410PAA-G360PAA-R340PAA-R350PAA-S420PAA-B430PAA-O370PAA-O380PAA-B312PAA-B710PAA-B720PAA-O310PAA-O313PAA-Y311

PAD-18 PAD-19 PAD-20 PAD-21 PAD-22 PAD-26PAD-23PAD-2 PAD-3 PAD-4 PAD-6

BLD-18 BLD-19 BLD-20 BLD-21 BLD-26BLD-2 BLD-3 BLD-4

9

DISPLAY CONTENTS

FLOOR DISPLAY WALL DISPLAY

BL-308BL-312BL-320BL-330BL-340BL-351BL-360BL-408BL-412BL-420BL-430BL-440BL-451BL-460BL-508BL-512BL-520BL-530BL-540BL-551BL-560BL-608BL-612BL-620BL-630BL-640BL-651BL-660BL-708BL-712BL-720BL-730BL-740BL-751BL-760

BLB-308BLB-312BLB-320BLB-330BLB-340BLB-351BLB-360BLE-308BLE-312BLE-320BLE-330BLE-340BLE-351BLE-360BLJ-308BLJ-312BLJ-320BLJ-330BLB-340BLJ-351BLJ-360

BLA-B410BLA-G360BLA-R340BLA-R350BLA-S420BLA-B430BLA-O370BLA-O380

−−−−−−


®

101010101010101010101010101055555554444444

55555555555555

1010101010101055555

101010101010101010101010101055555554444444

55555555555555

10101010101010

5555555

101010101010101010101010101055555554444444

555555555555555555555

101010101010101010101010101055555554444444

555555555555555555555

22222222

222

2

2222222

22222

101010101010101010101010101055555554444444555555555555555555555555555555555555555555

55555555

COILED TUBING

10

AGS coils are the same copper-brazed, double-walled, steel or copper nickel alloy tubing as used in our pre-made lines. When combined with AGS tube nuts and flaring tool, 25 foot lengths are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications.

BRAKE LINE COIL3/16”3/16”

Description / Length

3/16" X 25'3/16" X 50'3/16" X 100'

Tube Nuts *Purchased Separately

BLF-10, 11, 12, 38, 39, 40, 41, 42, 47, 48, 49BLC-325

NANA

StandardCatalog No.

Use to fabricate 3/16" Domestic, European, Japanese, British, and adapter brake lines

PAC-325PAC-350

NA


BRAKE LINE COIL


1/4" X 25'1/4" X 50'1/4" X 100'


BLF-13, 16, 43, 44BLC-425

NANA

StandardCatalog No.

CNC-325CNC-350

CNC-3100

NiCoppCatalog No.

CNC-425CNC-450CNC-4100

NiCoppCatalog No.

CNC-525CNC-5100

NiCoppCatalog No.

CNC-625CNC-6100

NiCoppCatalog No.

Use to fabricate 1/4" Domestic and adapter brake lines

PAC-425PAC-450

NA



5/16" X 25'5/16" X 100'


BLF-14, FLR-009


3/8" X 25'3/8" X 100'


BLF-15, FLR-008

FUEL & TRANSMISSION LINE COIL

BLC-525NA

StandardCatalog No.

Use to fabricate 5/16" fuel and transmission lines

PAC-525NA


FUEL & TRANSMISSION LINE COIL

BLC-625NA

StandardCatalog No.

Use to fabricate 3/8" fuel and transmission lines

PAC-625NA


BRAKE LINE COIL


6mm X 25'


BLF-46, 51, 52, 53BLC-725

StandardCatalog No.

Use to fabricate 6mm GM and adapter brake lines

PAC-725


1/4”1/4”

6mm6mm

5/16”5/16”

3/8”3/8”

25'50'100'

25'50'100'

25'100'

25'100'

25'

BRAKE LINE COIL KITS


BLC-325KBLC-425K

–BLC-525KBLC-625K

StandardCatalog No.

BLFA-8K/BLFA-8K-2BLFA-9KBLFA-10K

––

NiCoppCatalog No.

3/16"1/4"

3/16" & 1/4"5/16"3/8"

Steel Coil with Tube Nuts / 25' NiCopp Coil with Fitting Assortment (1 or 2 Coils)Steel Coil with Tube Nuts / 25' NiCopp Coil with Fitting Assortment

CNC-325 & CNC-425 Coils with BLFA-8 & BLFA-9 Fitting AssortmentsSteel Coil with Tube NutsSteel Coil with Tube Nuts

11

COPPER COILED TUBING

DiameterDescription

7/16"1/8"1/8"3/16"3/16"1/4"1/4"5/16"5/16"3/8"3/8"1/2"1/2"5/8"3/4"

Coil, Copper, 7/16 x 25 x 032Coil, Copper, 1/8 x 25 x 025Coil, Copper, 1/8 x 25 x 03Coil, Copper, 3/16 x 25 x 025Coil, Copper, 3/16 x 25 x 03Coil, Copper, 1/4 x 25 x 025Coil, Copper, 1/4 x 25 x 03Coil, Copper, 5/16 x 25 x 025Coil, Copper, 5/16 x 25 x 032Coil, Copper, 3/8 x 25 x 025Coil, Copper, 3/8 x 25 x 032Coil, Copper, 1/2 x 25 x 025Coil, Copper, 1/2 x 25 x 032Coil, Copper, 5/8 x 25 x 035Coil, Copper, 3/4 x 25 x 035

Gauge Length (feet)

0.0320.0250.030.0250.030.0250.030.0250.0320.0250.0320.0250.0320.0350.035

252525252525252525252525252525

AGS Part No.

CT-125-032CT-225CT-225-03CT-325CT-325-03CT-425CT-425-03CT-525CT-525-032CT-625CT-625-032CT-725CT-725-032CT-825-035CT-925-035

50' COPPER TUBING COIL

DiameterDescription

7/16"1/8"3/16"1/4"1/4"5/16"3/8"3/8"1/2"1/2"1/2"5/8"5/8"3/4"

Coil, Copper, 7/16 x 50 x 032Coil, Copper, 1/8 x 50 x 03Coil, Copper, 3/16 x 50 x 03Coil, Copper, 1/4 x 50 x 03Coil, Copper, 1/4 x 50 x 049Coil, Copper, 5/16 x 50 x 032Coil, Copper, 3/8 x 50 x 032Coil, Copper, 3/8 x 50 x 049Spool, Copper, 1/2 x 50 x 03Coil, Copper, 1/2 x 50 x 032Coil, Copper, 1/2 x 50 x 049Coil, Copper, 5/8 x 50 x 035Coil, Copper, 5/8 x 50 x 058Coil, Copper, 3/4 x 50 x 058

Gauge Length (feet)

0.0320.030.030.030.0490.0320.0320.0490.030.0320.0490.0350.0580.058

5050505050505050505050505050

AGS Part No.

CT-150-032CT-250-03CT-350-03CT-450-03CT-450-049CT-550-032CT-650-032CT-650-049CT-750-03CT-750-032CT-750-049CT-850-035CT-850-058CT-950-058


DiameterDescription

1/8"3/16"1/4"5/16"3/8"

Spool, Copper, 1/8 x 100 x 03Spool, Copper, 3/16 x 100 x 03Spool, Copper, 1/4 x 100 x 03Spool, Copper, 5/16 x 100 x 03Spool, Copper, 3/8 x 100 x 03

Gauge Length (feet)

0.030.030.030.030.03

100100100100100

AGS Part No.

CT-2100-03CT-3100-03CT-4100-03CT-5100-03CT-6100-03

For low pressure applications–not brake line


AGS Fittings are comprised of Tube Nuts, Unions (Couplers), and Adapters; used primarily in the automotive hydraulic braking, fuel, and transmission systems. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments. The following provides guidelines for selecting and identifying fittings.

Tube nuts are used in all types of automotive hydraulic lines, including: brake, fuel, oil, and transmission. To make connection, place nut over the tubing with the threaded end pointed towards the end to be flared (repeat on other end of tube). The tube flare will be clamped between the nut and the flare seat when tightened.

Automotive hydraulic brake fittings are formed to work with either SAE Inverted Double Flare (Domestic and Japanese vehicles) or ISO Bubble Flare (European and British vehicles). In either case, the fitting (whether a Tube Nut, Union, or Adapter) must be selected to match the end form of the tube or port it will be mating to or a proper seal will not be possible.

The charts and diagrams on the left refer to the standard thread measures for the nominal tube sizes and how they are determined for both imperial and metric fittings. Non-standard thread sizes do exist for each of the nominal tube sizes however and this is only used as a guide. Example: BLF-41 has a tube size of 3/16" and a thread measure of 1/2-20.

Measuring Imperial Threads: Measure the O.D. of the threads and the number of threads in one inch.

Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.

ISO Bubble Flare SAE Inverted Flare

TUBE NUTS

Standard UNF Imperial ThreadsNominalTube Size

3/16"

1/4"

5/16"

3/8"

3/8

7/16

1/2

5/8

24

24

20

18

3/8-24

7/16-24

1/2-20

5/8-18

Thread O.D.

ThreadsPer Inch

ThreadDescription

Standard Metric ThreadsDescriptionTube Size

Japanese 3/16"

European 3/16"

GM 6mm

Fuel 5/16"

Fuel 3/8"

10mm

10mm

12mm

14mm

16mm

1.0mm

1.0mm

1.0mm

1.5mm

1.5mm

M10 x 1.0

M10 x 1.0

M12 x 1.0

M14 x 1.5

M16 x 1.5

Thread O.D.

Crest(Pitch)

ThreadDescription

THREAD O.D.

TUBE SIZE

UNIONTUBE NUT

TUBE SIZE

# OF THREADSPER INCH

THREAD O.D.

CREST (PITCH)

Use for 3/16" Domestic brake lines.

Use for 3/16" Domestic adapter brake lines.

Use for 3/16" Domestic brake lines. BLPF-12 Black Oxide Coated – 10 per Bag

BLPF-13 Black Oxide Coated – 10 per Bag



Use for 5/16" Domestic fuel and transmission lines.

121030

121034

121003

121004

121005

Edelmann

7896x3

NA

105x3

105x4

105x5

Weatherhead

BLF-10C-5

BLF-11C-5

BLF-12C-5

BLF-13C-5

BLF-14C-5

5 per CardFitting

BLF-10B

BLF-11B

BLF-12B

BLF-13B

BLF-14B

1 per Bag

BLF-10

BLF-11

BLF-12

BLF-13

BLF-14

10 per Bag

BLFX-10

BLFX-11

BLFX-12

BLFX-13

BLFX-14

100 per Box

3/16"

3/16"

3/16"

1/4"

5/16"

Tube Size

3/8-24 (Long) Inverted

7/16-24 Inverted

3/8-24 Inverted

7/16-24 Inverted

1/2-20 Inverted

Thread Size / Flare

UNIONTUBE NUT

Scan to view more information on the AGS automotive fittings program

Stee

lFITTINGS

12

13

FITTINGS

TUBE NUTS (Continued)

Fitting

Use for 3/16" European brake lines.

Use for 3/16" Japanese brake lines.





Use for 6mm Import adapter brake lines.

Use for 3/16" Import adapter brake lines.



Use for 6mm GM brake lines.

Use for 6mm GM adapter brake lines.

Use for 6mm GM adapter brake lines.

Use for 3/8" Domestic fuel lines.

Use for 5/16" Domestic fuel lines.

Use for 3/16" British brake lines.

Use for 3/8" Domestic fuel and transmission lines. BLPF-15 Black Oxide Coated – 10 per Bag





5 per Card

BLF-39C-5

BLF-40C-5

BLF-41C-5

BLF-42C-5

BLF-43C-5

BLF-44C-5

BLF-46C-5

BLF-47C-5

BLF-48C-5

BLF-49C-5

BLF-51C-5

BLF-52C-5

BLF-53C-5

FLR-008C

FLR-009C

BLF-16C-5

BLF-15C-5

BLF-38C-5

1 per Bag

BLF-39B

BLF-40B

BLF-41B

BLF-42B

BLF-43B

BLF-44B

BLF-46B

BLF-47B

BLF-48B

BLF-49B

BLF-51B

BLF-52B

BLF-53B

FLR-008B

FLR-009B

BLF-16B

BLF-15B

BLF-38B

10 per Bag

BLF-39

BLF-40

BLF-41

BLF-42

BLF-43

BLF-44

BLF-46

BLF-47

BLF-48

BLF-49

BLF-51

BLF-52

BLF-53

FLR-008

FLR-009

BLF-16

BLF-15

BLF-38

100 per Box

BLFX-39

BLFX-40

BLFX-41

BLFX-42

BLFX-43

BLFX-44

BLFX-46

BLFX-47

BLFX-48

BLFX-49

BLFX-51

BLFX-52

BLFX-53

FLRX-008

FLRX-009

BLFX-16

BLFX-15

BLFX-38

Thread Size / Flare

M10 x 1.0 Bubble

M10 x 1.0 Inverted

1/2-20 Inverted

9/16-18 Inverted

9/16-18 Inverted

1/2-20 Inverted

M12 x 1.0 Bubble

M11 x 1.5 Bubble

M12 x 1.0 Bubble

M13x 1.5 Bubble

M12 x 1.0 Bubble

M12 x 1.5 Bubble

M14 x 1.5 Bubble

M16 x 1.5 Surface Seal

M14 x 1.5 Surface Seal

7/16-24 (Long) Inverted

5/8-18 Inverted

3/8-24 Bubble

Edelmann

276110

121050

NA

121039

121049

121045

NA

276011

276012

276013

NA

NA

NA

121070

121069

121040

121006

NA

Weatherhead

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

7896x4

105x6

NA

Stee

l

FITTINGS

14

Unions are used to join two brake, fuel, or transmission lines together. This may be needed, for example, in long runs from the dual master cylinder to the rear axle. Match the thread and flare type to the lines being connected. It is important that both flare type and thread match for a leak-proof connection.

Use for joining 3/16" Domestic brake lines.

UNIONS

Compression unions are used in low pressure application such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection.

COMPRESSION UNIONS

Use for joining 1/4" Domestic brake lines.

Use for joining 5/16" fuel and transmission lines.

Use for joining 3/8" fuel and transmission lines.

Use for joining 3/16" British brake lines.

Use for joining 3/16" European brake lines.

Use for joining 3/16" Japanese brake lines.

Use for joining 6mm GM brake lines.

Use for joining 3/16" copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).






123300

123400

123500

123600

275300

276000

274000

NA

Edelmann

302x3

302x4

302x5

302x6

1594

7975

7934A

NA

Weatherhead

BLU-3C

BLU-4C

BLU-5C

BLU-6C

BLU-7C

BLU-8C

BLU-9C

BLU-10C

1 per CardFitting

BLU-3B

BLU-4B

BLU-5B

BLU-6B

BLU-7B

BLU-8B

BLU-9B

BLU-10B

1 per Bag

BLU-3

BLU-4

BLU-5

BLU-6

BLU-7

BLU-8

BLU-9

BLU-10

10 per Bag

BLUX-3

BLUX-4

BLUX-5

BLUX-6

BLUX-7

BLUX-8

BLUX-9

BLUX-10

100 per Box

3/16"

1/4"

5/16"

3/8"

3/16"

3/16"

3/16"

6mm

Tube Size

3/8-24 Inverted

7/16-24 Inverted

1/2-20 Inverted

5/8-18 Inverted

3/8-24 Bubble

M10 x 1.0 Bubble

M10 x 1.0 Inverted

M12 x 1.0 Bubble

Thread Size / Flare

162300

162400

162500

162600

162200

162800

Edelmann

62 x 3

62 x 4

62 x 5

62 x 6

62 x 2

62 x 8

Weatherhead

CF-1

CF-2

CF-3

CF-4

CF-0

CF-5

1 per CardFitting

CF-1B

CF-2B

CF-3B

CF-4B

CF-0B

CF-5B**

1 per Bag

CFB-1

CFB-2

CFB-3

CFB-4

CFB-0

CFB-5***

10 per Bag

CFX-1

CFX-2

CFX-3

CFX-4

CFX-0

CFX-5*

100 per Box

3/16"

1/4"

5/16"

3/8"

1/8"

1/2"

Tube Size

NA

NA

NA

NA

NA

NA

Thread Size / Flare

Not foruse withBrakingSystems

Stee

lBr

ass

Bras

sBr

ass

* CFX-5 available in quantities of 10 per box only. **CF-5B available in quantities of 5 per box only. ***CFB-5 available in quantities of 5 per bag only.

15

FITTINGS

Edelmann WeatherheadQty Qty Tube Size Thread Size / Flare Material

Use for adapting a 1/2-20 Inverted port to a 3/8" Domestic fuel line.

Use for adapting a 1/2-20 Inverted port to a 1/4" Domestic brake line.







Use for adapting a 1/2-20 Inverted port to a 9/16-18 Inverted connection.



Use for adapting a Japanese port to a 3/16" Domestic brake line.

Use for adapting a British port to a 3/16" Domestic brake line.

Use for adapting a European port to a 3/16" Domestic brake line.

Use for adapting a Metric Bubble port to a 3/16" Domestic brake line.

BRAKE ADAPTER FITTINGS



Adapter fittings are generally used to allow connection of standard brake lines to the different sized ports used in dual master cylinders. Simply match the male side of the adapter to the port connection on the dual master cylinder and the female side of the adapter to the brake line connection to be made.

258450

258307

258430

258403

258303

270300

271300

265000

258540

258650

258350

258340

258560

258306

258302

272330

264000

Edelmann

7829

7913

7828

7908

7910

1443

1442

7974

7917

7915

7909

7818

7916

7912

7911

1441

7973

Weatherhead

BLF-19C

BLF-21C

BLF-23C

BLF-25C

BLF-27C

BLF-29C

BLF-31C

BLF-33C

BLF-17C

BLF-18C

BLF-20C

BLF-22C

BLF-24C

BLF-26C

BLF-28C

BLF-30C

BLF-32C

1 per CardFitting

BLF-19B

BLF-21B

BLF-23B

BLF-25B

BLF-27B

BLF-29B

BLF-31B

BLF-33B

BLF-17B

BLF-18B

BLF-20B

BLF-22B

BLF-24B

BLF-26B

BLF-28B

BLF-30B

BLF-32B

1 per Bag

BLF-19

BLF-21

BLF-23

BLF-25

BLF-27

BLF-29

BLF-31

BLF-33

BLF-17

BLF-18

BLF-20

BLF-22

BLF-24

BLF-26

BLF-28

BLF-30

BLF-32

10 per Bag

BLFX-19

BLFX-21

BLFX-23

BLFX-25

BLFX-27

BLFX-29

BLFX-31

BLFX-33

BLFX-17

BLFX-18

BLFX-20

BLFX-22

BLFX-24

BLFX-26

BLFX-28

BLFX-30

BLFX-32

100 per Box

7/16-24 Inverted

1/2-20 Inverted

7/16-24 Inverted

7/16-24 Inverted

3/8-24 Inverted

3/8-24 Inverted

3/8-24 Inverted

3/8-24 Inverted

1/2-20 Inverted

5/8-18 Inverted

3/8-24 Inverted

3/8-24 Inverted

1/2-20 Inverted

9/16-18 Inverted

3/8-24 Inverted

3/8-24 Inverted

3/8-24 Inverted

Female

1/2-20 Inverted

9/16-18 Inverted

3/8-24 Inverted

9/16-18 Inverted

9/16-20 Inverted

M10 x 1.0 Inverted

M10 x 1.0 Bubble

M12 x 1.0 Bubble

7/16-24 Inverted

1/2-20 Inverted

1/2-20 Inverted

7/16-24 Inverted

5/8-18 Inverted

1/2-20 Inverted

9/16-18 Inverted

3/8-24 Bubble

M11 x 1.5 Bubble

Male

Bras

s

FITTINGS

16

Use for adapting a Metric Bubble port to a 3/16" Japanese brake line.

Use for adapting a GM 6mm port to a 3/16" Japanese brake line.

Use for adapting a Metric Bubble port to a 3/16" Japanese brake line.

Use for adapting a Metric Inverted port to a 3/16" British brake line.


Use for adapting a 7/16-20 Bubble port to a 3/16" British brake line.

Male elbow for 3/16" brake line

Male branch tee for 3/16" brake line

Male connector for 3/16" brake line

Union tee for 3/16" brake line

Plug for 3/16" brake line

263000

NA

NA

122320

228200

120300

NA

NA

NA

124320

130333

Edelmann

7972

7936

NA

402 x 3

3600 x 2

NA

7935

7937

NA

202 x 3

702 x 3

Weatherhead

BLF-34C

BLF-36C

BLF-54C

BLF-56C

BLF-58C

BLF-60C

BLF-35C

BLF-37C

BLF-55C

BLF-57C

BLF-59C

1 per CardFitting

BLF-34B

BLF-36B

BLF-54B

BLF-56B

BLF-58B

BLF-60B

BLF-35B

BLF-37B

BLF-55B

BLF-57B

BLF-59B

1 per Bag

BLF-34

BLF-36

BLF-54

BLF-56

BLF-58

BLF-60

BLF-35

BLF-37

BLF-55

BLF-57

BLF-59

10 per Bag

BLFX-34

BLFX-36

BLFX-54*

BLFX-56

BLFX-58

BLFX-60

BLFX-35

BLFX-37

BLFX-55

BLFX-57

BLFX-59

100 per Box

3/8-24 Inverted

M10 x 1.0 Inverted

3/8-24 Bubble

3/8-24 Inverted

3/8-24 Inverted

NA

M10 x 1.0 Inverted

M10 x 1.0 Inverted

3/8-24 Bubble

3/8-24 Inverted

3/8-24 Inverted

Female

M13 x 1.5 Bubble

M12 x 1.0 Bubble

M9 x 1.0 Inverted

1/8" NPTF

1/8" NPTF

3/8-24 Inverted

M11 x 1.5 Bubble

M13 x 1.5 Bubble

7/16-20 Bubble

1/8" NPTF

NA

Male

BRAKE ADAPTER FITTINGS (Continued)

BRAKE SYSTEM CONNECTION DIAGRAM

The diagram is simplified to show how the connection from master cylinder to the wheel cylinder is made. Two options for adapting the different sized ports on the master cylinder (1/2-20) to a standard 3/16" domestic brake system (3/8-24) are shown. One uses a simple adapter fitting (BLF-20) while the other uses an 8" adapter line (BLA-R350) and a union (BLU-3). Both are good solutions and accomplish the same objective.

REARWHEEL CYLINDER

FLEXIBLEBRAKEHOSE

FLEXIBLEBRAKEHOSE

FRONTWHEEL CYLINDER

MASTER CYLINDER

BLU-3UNION3/8-24

BLU-3UNION3/8-24

BLA-R3501/2-20 TO 3/8-24

1/2-20INVERTED

PORT

BLF-201/2-20 TO 3/8-24

BL-308DOMESTIC

BRAKE LINE

Bras

sSt

eel

Bras

s

* BLFX-54 available in quantities of 10 per box only.

Use for adapting a GM 6mm port to a 3/16" British brake line. NA NABLF-61C BLF-61BBLF-61 BLFX-61 3/8-24 Bubble M12 x 1.0 Bubble

17

FITTING ASSORTMENTS

ASSORTMENT DESCRIPTIONSAGS Fitting Assortments are designed for the specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems. Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy.

BLFA-1 Tube Nut Assortment - 9 SKU Includes nine specialized tube nuts used in 8" brake adapter lines for connecting different sized port openings on master cylinders to standard brake systems. Contains both SAE Inverted and ISO Bubble tube nuts as well as UNF Imperial and Metric threads.

BLFA-3 Master Cylinder Adapter Assortment - 18 SKU A complete master cylinder adapter assortment for converting different sized port opening on master cylinders to standard braking systems. Adapters are included for converting from non-standard UNF imperial threads to standard 3/16", 1/4", 5/16" and 3/8" brake, fuel, and transmission systems. Also convert domestic systems to import systems and vice-versa.

BLFA-4 Master Cylinder Adapter Assortment - 9 SKU Nine of the most popular master cylinder adapters for Domestic vehicles. Adapt different sized port openings on master cylinders to standard 3/16" and 1/4" Domestic brake systems. Also includes adapters for converting between 5/16" and 3/8" port sizes.

BLFA-5 Large Fitting Assortment - 24 SKU An assortment of 24 most popular Tube Nuts, Unions, and Adapters for most repair shops. Includes Tube Nuts for all Domestic applications, as well as 6mm and Japanese. Also includes Unions for 3/16" and 1/4" Domestic, Japanese and European vehicles. Popular adapters include European to Domestic and Japanese to Domestic. Also included are non-standard Tube Nuts for adapter line applications.

BLFA-2 Metric Fitting Assortment - 9 SKU Assortment of nine most popular metric fittings (tube nuts, unions, and adapters) for use when working with braking systems of Japanese and European vehicles.

FITTING ASSORTMENTS

18

ASSORTMENT DESCRIPTIONS (Continued)

BLFA-9 Fitting Assortment - 8 SKUAn assortment that contains tube nuts, adapters, and unions for working with all types of domestic and import 1/4" diameter brake line systems.

CFA-1 Compression Union Assortment - 6 SKUAn assortment that contains 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2" compression unions for joining copper, brass, or aluminum tubing in low-pressure applications (not for use in braking systems).

BLD-27 Carded Fitting Assortment Includes 20 of the most popular Unions and Brake Adapter Fittings. All fittings are carded, one fitting per clamshell. Rack is designed to fit in front of AGS Steel Line floor display. Display can also be wall-mounted separately.

BLD-29 and PAD-29 – Wall Display (No Fittings)

BLFA-9K – see page 10

BLFA-8 Fitting Assortment - 24 SKU An assortment that contains tube nuts, adapters, and unions for working with all types (domestic, import, 6mm) of 3/16" diameter brake line systems.

BLFA-8K – see page 10

BLFA-6 Large Fitting Assortment - 18 SKU An assortment of 18 Tube Nuts, Unions, and Adapters for any repair shop and especially those working on import vehicles. Includes Tube Nuts for all Import brake applications, as well as 3/16" Domestic. Also includes Unions for British and GM 6mm. Adapters include a 6mm to 3/16" Domestic brake system.

BLFA-7 Union Assortment - 8 SKU An assortment of 8 brass unions for joining all types of brake and fluid transfer lines: Domestic 3/16", 1/4", 5/16, 3/8", Japanese, European, British, and 6mm.

19

FITTING ASSORTMENTS

ASSORTMENT CONTENTSASSORTMENTS

FittingPart No.

BLF-10BLF-11BLF-12BLF-13BLF-14BLF-15BLF-16BLF-17BLF-18BLF-19BLF-20BLF-22BLF-23BLF-24BLF-25BLF-27BLF-28BLF-29BLF-30BLF-31BLF-32BLF-33BLF-34BLF-35BLF-36BLF-38BLF-39BLF-40BLF-41BLF-42BLF-43BLF-44BLF-47BLF-48BLF-49BLF-51BLF-52BLF-53BLU-3BLU-4BLU-5BLU-6BLU-7BLU-8BLU-9BLU-10

CF-0CF-1CF-2CF-3CF-4CF-5

FLR-008FLR-009

BLFA-1

5

5

5555555

BLFA-2

5

2

55

555

22

BLFA-3

222222222222222222

BLFA-4

222222222

BLFA-6

10

10

555

5555

101010

555

22

2

BLFA-7

22222222

BLFA-8

101020

11

11212111

2121266

444

4

22

BLFA-9

4

4

2

2

2

44

4

BLD-27

5*5*5*5*5*5*5*5*5*5*5*5*5*

5*5*5*5*5*5*5*

CFA-1

2104222

BLFA-5

10101010

10

5

555

105555555

555

55

22

20

OIL DRAIN PLUGS

Easy InstallFinger-grip wing foreasy of installation.

All plugs have 14mm hex – just one wrench

works for all!

Hi-Temp GasketRed hi-temp gasket formax sealing protection

Rust ProtectionBlack oxide coating for rust and corrosion protection

Avoid Cross-ThreadingPilot-point tip to avoid cross-threading during installation

Easy IDThread size etched on each plug

1986-2012 ACURA, 1977-79 AMC, 1973-92, 1995-2012 AUDI, 1982-1988 BUICK, 1997-2001,2003-04 CADILLAC, 1976-2010 CHEVY, 1983-85, 1987-2012 CHRYSLER, 1978-2012 DODGE,1989-98 EAGLE, 2012 FIAT, 1971-2012 FORD, 1989-98 GEO, 1982-85, 2001-10 GMC TRUCK,1983-2012 HONDA, 1987-2012 HYUNDAI, 1981-2004 ISUZU, 1997-98, 2000-09 JAGUAR,1999-2012 JEEP, 1994-2012 KIA, 2003-08 LAND ROVER, 1977-79, 1982, 1988-2012 LINCOLN,1971-2012 MAZDA, 1974-2012 MERCEDES-BENZ, 1971-2011 MERCURY, 1985-89 MERKUR,1983-2012 MITSUBISHI, 1982-88 OLDSMOBILE, 1978-2001 PLYMOUTH, 1982-94,2009-10 PONTIAC, 1980-2009 SAAB, 2000-05, 2008 SATURN, 1989-2008 SUZUKI,1968-2012 VOLKSWAGEN

1983-84 AMC, 1988-89 EAGLE, 1990-2010 FORD TRUCK, 1984-91 JEEP

M14 X 1.5ODP-00007(B or C*)

ODP-00008(B or C)

ODP-00009(B or C)

ODP-00010(B or C)

ODP-00011(B or C)

ODP-00012(B or C)

ODP-00013(B or C)

ODP-00014(B or C)

ODP-00015(B or C)

ODP-00016(B or C)

ODP-00017(B or C)

ODP-00018(B or C)

ODP-00019(B or C)

M14 X 1.25

M12 X 1.75

M12 X 1.5

M12 X 1.25

M16 X 1.5

M18 X 1.5

M22 X 1.5

M26 X 1.5

1/2-20

5/8-18

3/4-16

M20 X 1.5

1968-2012 BMW, 1984 LINCOLN, 1972-2002, 2004-12 MERCEDES-BENZ

1982-85 CHRYSLER, 1971-82, 1990-93, 2002-06 DODGE, 1976-86 PLYMOUTH, 1972-73 SUBARU,1974-92 TOYOTA, 1992-2012 VOLVO

1968-83, 1994-95 BMW, 1999 CADILLAC, 1981-2000 CHEVROLET, 1980-89, 1991-2001 DODGE,1980-86 FORD, 1981-2000 GMC, 1980-96 JEEP, 1994, 1996-97 OLDSMOBILE, 1980-81 PLYMOUTH,1971 SUBARU

1990-99 AUDI, 1961-89 MERCEDES-BENZ, 1993, 1995 VOLKSWAGEN, 1970-75, 1980-87 VOLVO

1964-88 AMC, 1959-96 BUICK, 1966-96 CADILLAC, 1968-82 CHECKER, 1946-96 CHEVROLET,1962-99 CHRYSLER, 1961-2006 DODGE, 1993-97 EAGLE, 1954-96 FORD, 1950-96 GMC,1992-2000 HUMMER, 1968-80 INTERNATIONAL, 1968-2006 JEEP, 1957-78, 1980-90 LINCOLN,1957-90 MERCURY, 1998-99 MITSUBISHI, 1961-94 OLDSMOBILE, 1961-99 PLYMOUTH,1946-95 PONTIAC

1950-65 CADILLAC, 1990-95 CHEVROLET, 1959-61 CHRYSLER, 1959-63 DODGE,1959-63 PLYMOUTH

1958-63 AMC, 1982-85, 1988-95, 2000 CHRYSLER, 1978-2001 DODGE, 1978-2000 PLYMOUTH,1976-79, 1983-95, 1998 VOLVO

1972-75, 1981-82 CHEVROLET, 1983-86 DODGE, 1970-83 HONDA, 1987 ISUZU,1983-86 PLYMOUTH, 1973-2012 SUBARU

1990-92 DODGE, 1988-92 EAGLE, 1971-96 JAGUAR, 1974-91 PEUGEOT, 1977-87 RENAULT,1976-79 VOLVO

1985-88, 1998-2002 CHEVY, 1989-97 GEO, 1990-2012 INFINITI, 1990-2012 LEXUS,1993-2002 MERCURY, 1982-2012 NISSAN, 2003-10 PONTIAC, 2004-12 SCION, 1985 SUZUKI,1985-2012 TOYOTA

1980-83 AMC, 1979-2012 BUICK, 1982-2012 CADILLAC, 1979-2012 CHEVY, 1995-2012 FORD,1985-2012 GMC TRUCK, 2003-10 HUMMER, 1991-94, 1996-2000, 2003-08 ISUZU TRUCK,1980-84 JEEP, 2000-12 LINCOLN, 1996-2012 MAZDA, 1995-2011 MERCURY,1979-2004 OLDSMOBILE, 1979-2010 PONTIAC, 1991-2010 SATURN

Part Number Size Application

* Packaging Options: B - Bagged single plug, C - Clamshell carded single plug

AGS ACCUFIT™ Oil Drain Plugs is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT™ your number one choice for oil drain plugs.

Scan to view an instructional video and to visit the mobile drain plug application selector.

Refer to the ACCUFIT™ Application Guidebook (C-1000) or mobile selector application for a comprehensive listing drain plug part numbers and the corresponding year/make/model table for quick and easy selection.

21

OIL DRAIN PLUG GASKETS

OIL DRAIN PLUG REPLACEMENT GASKETS

15 OE-style replacement gaskets for the most popular OE-style oil drain plugs. Allows easy replacement of worn or damaged oil drain plug gaskets. Many applications/sizes available in copper, rubber, nylon, aluminum, metal, and synthetic gasket materials.

Package Quantity: Bag of 10 Gaskets

M14 Copper3/Carded Clamshell5/Bag

ODP-65268(B or C*)

9/16" / M14 Metal/Rubber

1/Carded Clamshell5/Bag

ODP-65269(B or C)

1/2" / M12 Nylon5/Carded Clamshell5/Bag

ODP-65270(B or C)

1/2" / M12 Copper2/Carded Clamshell5/Bag

ODP-65271(B or C)

9/16" / M14 Nylon5/Carded Clamshell5/Bag

ODP-65272(B or C)

5/8" Copper2/Carded Clamshell5/Bag

ODP-65273(B or C)

1/2" / M12 Metal/Rubber


ODP-65274(B or C)

M12 Aluminum2/Carded Clamshell5/Bag

ODP-65290(B or C)

Part Number Size Material Pkg Qty

*Packaging Options: B - Bag, C - Carded Clamshell

Part Number Size Material Pkg Qty

ODP-65292(B or C)

ODP-65301(B or C)

ODP-65310(B or C)

ODP-65311(B or C)

ODP-65327(B or C)

ODP-65330(B or C)

ODP-66451(B or C)

M14

M12

1/2" / M14

M20

7/16" / M12

1/2" / M12

M12

Aluminum

Synthetic

Oversize/Crush

Crush

Rubber

Nylon

Rubber





22.80mm ODP-00007 and ODP-00008ODP-10007

20.80mm ODP-00009, ODP-00010,ODP-00011 and ODP-00016ODP-10009

24.80mm ODP-00012 and ODP-00017ODP-10012

26.80mm ODP-00013 and ODP-00018ODP-10013

Part Number Size Replacement Part Number Size Replacement

ODP-10014

ODP-10015

ODP-10019

30.80mm

34.80mm

28.80mm

ODP-00014

ODP-00015

ODP-00019




ODPA-1 OIL DRAIN PLUG ASSORTMENT - 24 SKU

22

BRAKE AND FUEL LINE WRENCH

More Grip...Less Slip. The corners of this revolutionary wrench head act like spring hinges to grab and tighten around the rounded, chewed-up, corroded, worn, and/or under-sized hex surfaces of brake and fuel fittings.

Features• Removes even the most worn brake & fuel fittings• Works where other flare nut wrenches fail• Easy access to the tight areas fittings are found• ‘Spring-Torque’ provides amazing grip• Chrome molybdenum black oxide wrench heads

FF10

FF11

FF1213

FF14

FF204

Fits 3/8" (10mm)

Fits 7/16" (11mm)

Fits 1/2" (12/13mm)

Fits 9/16" (14mm)

ALL 4 Sizes

Description

FF10 FF11 FF1213

Product

FF204

BRAKE AND FUEL LINE WRENCH .

TM

BY

FF14

See the video!

SPECIALTY TOOLS

The ODPA-1, Oil Drain Plug Assortment, includes all 13 ACCUFIT™ oil drain plugs that covers up to 93% of all vehicles on the road. Also included is an assortment of the 11 most popular OE-style gaskets. Pair the ODPA-1 with the ACCUFIT™ Oil Drain Plug Application Guidebook (C-1000) for quick and easy selection.

“The kit has worked for every car I needed to replace a plug in.” ~ ACCUFIT™ Customer

REPAIR PLUGS

Repair oil drain plugs offer a fast and inexpensive solution to stripped oil drain pan plug threads (oil pan replacement can cost up to $1,000 or more). Using a universal or oversize design allows a temporary or permanent repair if the threads in the pan are too ruined for a standard OE size plug.

Package Quantity: 1/Carded Clamshell, 1/Bag

ODP-65213(B or C)

M12 x 1.75Oversize

Part Number Size Part Number Size

1/2"Universal

5/8"Universal

ODP-65200(B or C)

1/2"Oversize

ODP-65204(B or C)

ODP-65201(B or C)

ODP-65217(B or C)

ODP-65240(B or C)

M14 x 1.5Oversize

WingedUniversal

• Remove worn and

corroded fittings

with ease

• Fits in tight spots

• The harder you push,

the more it grips!

Keys to Innovation:

SPECIALTY TOOLS

Single Bubble Inverted

FF-1

ON-VEHICLE FLARING! The FlareForce™ is everything you need to ensure professional quality flares every time in the convenience of an all-in-one design — LIGHTNING FAST! Produce on-the-fly flares with no loose parts and no need for a vise. FlareForce™ self-centers over the tube to provide accurate flares. A quick release allows easy insertion and removal of tubing. One-handed operation with trigger control allows flaring on already tubing that’s already installed.

Features• Create high-quality flares in seconds — single, bubble and inverted• Will work with 3/16", 1/4", 5/16", 3/8" tubing — steel, PolyArmour® and NiCopp®

• Also works with copper, aluminum and brass

23

Three Times Gripping Surface. The Hexforce™ “Butterfly Wrench” provides a full wrap-around gripping surface that open-end wrenches cannot... even on captive fittings where sockets don’t work. Perfect for chassis, suspension, alignment, and tube nuts.

Features• Unique pivot/hinge/clamp action for 360˚ contact• Won’t slip off even the most damaged hex surface like open-end wrenches• Socket-like gripping on captive fittings• Attaches to standard 1/2" or 3/8" ratchet drive• Other sizes also available

360º

CONTACT

TIGHT GRIP DUAL SIZES1/2" or 3/8"

SQUARE DRIVE

*Can be purchased separately (reference available sizes below).

HF-10

HF-11

HF-12

HF-14

HF-16

HF-17

10mm (3/8)

11mm (7/16)

12/13mm (1/2)

14mm (9/16)

16mm (5/8)

17/18mm (11/16)

DescriptionProduct

HF-19

HF-21

HF-23

HF-27

HF-30

HF-32

19/20mm (3/4)

21/22mm (3/16-7/8)

23/24mm (15/16)

27mm (1-1/16)

30mm (1-/16)

32mm (1-1/4)

DescriptionProduct

See the video!

See the video!

HF-23* HF-21* HF-19*

HFK-2

HF-17* HF-16*

IN-LINE FLARING TOOLTM

IN-LINE FLARING TOOL • BY

HFK-2 WRENCH SET 5PCTM

360º WRAP-AROUND WRENCH • BY TM

• A perfect flare in less

than 10 seconds!

• Pneumatic operation

• Single, double, and bubble

flares

Keys to Innovation:

• For hard-to-reach tube fittings• Doesn’t slip off damaged fitting• Use your existing wrench!

Keys to Innovation:

SPECIALTY TOOLS

24

The AGS Brake Line Fitting Gauges come in both SAE/Inch and ISO/Metric versions. The Brake Line Fitting Gauge is an accurate and easy-to-use thread checker for the most common thread sizes found in automotive braking systems. Conveniently assembled onto a wire loop, it is especially well suited for distinguishing between similar inch and metric threads. This tool is a great addition for Auto, Motorcycle, Marine, ATV or RV Repair Shops.

BRAKE LINE FITTING GAUGES

• 1/8" NPTF• 1/4" NPTF• 3/8-24• 7/16-20• 7/16-24• 1/2-20• 9/16-18• 9/16-20• 5/8-18

Thread Gauge Sizes

Female Checker Male Checker

BLFG

-UN

FSA

E/In

ch B

rake

Fitt

ing

Gau

geBL

FG-M

ETM

etric

Bra

ke F

ittin

g G

auge

male checker

female checker

inch metric

Features

• Each size has a male and female end checker on the same gauge.

• Thread sizes are permanently stamped onto each gauge.

• Inch gauges are clear zinc plated, metric gauges are black oxide.

• A wire cable with plastic coated loop at each end provides convenient hanging in many locations.

• Each gauge rotates freely on the wire cable for quick and easy thread verification.

Thread Gauge Sizes

• M16 x 1.5• M14 x 1.5• M13 x 1.0• M12 x 1.5• M12 x 1.0• M11 x 1.5• M10 x 1.0• M9 x 1.0

Coated wirecable loop

Gauges freelyrotate on the

wire cable

25

SPECIALTY TOOLS

Designed and patented in Europe and already a huge seller there. The innovative design of the Line Wrench is a must have for any professional mechanic. The Line Wrench makes fast work of troublesome fittings.

Features• Unique patented ratcheting function• Open and close wrench head with single-handed operation• Fits completely around the hex of the nut• Works on rounded and corroded tube nuts• More pressure applied to tool makes for tighter grip on nut• SAE and metric sets available, as well as individual• Double-ended wrenches or open-end on opposite side

Another unique and popular innovation direct from Europe is the Nut Driver Pro. The Nut Driver Pro makes getting to hard to reach hex screws a much less painful experience. Great for hose clamps.

Features• Grips hex screws in confined, hard to reach places• Unique tensioning and lock mechanisms• Allows single-handed operation — engage, grip, work, disengage• No-slip grip handle• Fixed length shafts available for 6mm, 7mm, 1/4", & 5/16" hex sizes• Flexible shafts available for 7mm, 1/4", and 5/16" hex sizes

FIXE

D L

ENG

TH S

HAF

T

FLEX

IBLE

SH

AFT

NDP7-190

NDP7-290

NDP6-290

NDP1/4-290

NDP5/16-290

NDP7-500

NDP7-SUPRAFLEXI

NDP5/16-SUPRAFLEXI

NDP1/4-SUPRAFLEXI

RATCHETING FLARE NUT WRENCH

LOCKING NUT DRIVER

• Ratcheting action on

worn and corroded fittings

• Faster on and off!

• Single-handed operation

Keys to Innovation:

LINE WRENCH

NUT DRIVER PRO

LW0809FLEX LW32OPEN

LW27OPEN

LW24OPEN

LW22OPEN

LW19OPEN

LW17OPEN

LW51638FLEX

LW1011FLEX

LW71612FLEX

LW1213FLEX

LW1415FLEX

LW91658FLEX

LW1617FLEX

LW1819FLEX

LW111634FLEX

• Grips hex screws where

no other tool can reach

• Locks on and holds tight!

• Perfect for hard to

reach clamps

Keys to Innovation:

SPECIALTY TOOLS

26

Repairing fuel systems involving quick disconnects and nylon fuel hose has always been a slow and difficult process. Heating the hose in hot water and trying to jam the barb into the hose without damage is slow and tedious.

The Nylon Fuel Repair kit for KLEDGE-LOK™ can now assemble both straight and angled quick disconnects into nylon fuel hose quickly and perfectly every time. Setup is fast and easy. The KLEDGE-LOK™ tool does the rest.

ON-VEHICLE REPAIR• Build your own nylon lines

in minutes

• Uses Kledge-Lok tool

for virtually no-effort

repairs

• Quick connectors, splices,

and more!

Keys to Innovation:

NYLON FUEL REPAIR

SLKFR

The KLEDGE-LOK™ tool is designed to complete most line repairs right on the vehicle by reaching into, behind, and underneath the difficult places that lines are found. Use with the supplied T-bar, a basic open-end wrench, a square-drive ratchet, or an air or battery powered impact wrench. The KLEDGE-LOK™ System has been successfully tested to 1000 PSI for high-pressure applications such as transmission cooler lines, steel fuel lines, and oil cooler lines. Repairs can also be made in automotive and heavy duty truck applications.

The ACRK-STARTER kit is the perfect way to set up a shop with the ability to repair aluminum A/C lines quickly and profitably. It’s also a great alternative for a shop to have a system on hand to splice new OE lines that come in two sections. The kit consists of a full SLK-2 with both tool and full set of jaws, as well as a scaled down assortment of seven total tube-to-tube repair unions. Once the amazing utility of this system is realized, the kit can be easily replenished with tube-to-hose and block-off repairs.

ALUMINUM • STEEL • COPPER • COPPER ALLOY REDUCED BARRIER A/C HOSE • NYLON TUBING

Features• Permanent leak repair• Saves time and money• Professional OE-style repair• Selected 2013 MACS Most Innovative New Product

PROFESSIONAL TUBING REPAIR • Repair leaking/damaged lines with ease!• Complete repairs on the vehicle• Get the shop started now!

Keys to Innovation:

SLK-2

ACRK-STARTER

27

LINE REPAIR SYSTEMS

ASSORTMENT DESCRIPTIONS

ASSORTMENT CONTENTS

ACRK-1 Aluminum A/C Repair Tubing Kit ACRK-1 contains 12" lengths of replacement aluminum A/C repair tubing in 5/16", 3/8", 1/2", 5/8", and 3/4" diameters to be used with the SPLICE-LOK™ and KLEDGE-LOK™ A/C repair systems. A ratcheting metal tube cutting tool is also included.

ACRK-4 Professional Tubing RepairACRK-4 contains an assortment of KLEDGE-LOK™ fittings for permanent leak repair of 5/16", 3/8", 1/2", 5/8", and 3/4" diameters of cracked, kinked or leaking lines without removing the lines from the vehicle! Designed to be used in conjunction with the professional KLEDGE-LOK™ tool (SLK-2). Repairs can be made on SAE and metric tube-to-tube, tube-to-rubber hose, or tube block-offs. See why this system was awarded the 2013 Most Innovative New Product by the Mobile Air Conditioning Society!

ACRK-2 A/C Repair Ends Aluminum O-ring Assortment ACRK-2 contains an assortment of A/C condenser aluminum O-ring repair ends in 3/8", 1/2", 5/8", and 3/4" diameters to be used with the SPLICE-LOK™ and KLEDGE-LOK™ A/C repair systems. Ends include external male, internal male, and external female.

ACRK-3 A/C Tubing Repair System ACRK-3 contains an assortment of SPLICE-LOK™ fittings for permanent leak repair of any combination of 5/16", 3/8", 1/2", 5/8", and 3/4" diameters of cracked, kinked or leaking A/C lines using standard hand tools without removing the lines from the vehicle! Repairs can be made on SAE and metric aluminum tube-to-tube, aluminum tube-to-rubber A/C hose, or aluminum tube block-offs.

FG Case Qty ACRK-1 QtyFG Part # Description

Tubi

ng

ACRK-1

ACR-011

ACR-012

ACR-013

ACR-014

ACR-015

ACR-032

SPLICE-LOK™ / KLEDGE-LOK™ A/C Repair Tubing Assortment

5/16" x 12" Aluminum A/C Repair Tubing - 8 tubes per box





Ratcheting Metal Tube Cutting Tool

1

1

1

1

1

1

1

NA

8 (1 Box)

6 (1 Box)

4 (1 Box)

4 (1 Box)

4 (1 Box)

1

Tube

Cut

ter

SPLICE-LOK™ / KLEDGE-LOK™ A/C REPAIR TUBING ASSORTMENT ACRK-1

ACR-011A/C Aluminum Repair Tubing 5/16” x 12”

ACR-015A/C Aluminum Repair Tubing3/4” x 12”

ACR-032XForce® Ratcheting Tube Cutter

ACR-013 A/C Aluminum Repair Tubing1/2” x 12”



1125260 REV A SPLICE-LOK™ / KLEDGE-LOK™ A/C REPAIR ENDS O-RING ASSORTMENT ACRK-2

ACR-0333/8” O-Ring External Male QTY: 2




ACR-0413/8” O-Ring External FemaleQTY: 2




ACR-037 3/8” O-Ring Internal MaleQTY: 2




1125760 REV A

KLEDGE-LOK™ A/C REPAIR ASSORTMENT ACRK-4

ACR-0015/16” Aluminum Tube to #6 Hose (5/16” / 8mm)QTY: 2

ACR-002 3/8” Aluminum Tube to #6 Hose (5/16” / 8mm)QTY: 2




ACR-005 5/16” Aluminum Tube to 5/16” Aluminum TubeQTY: 2

ACR-0063/8” Aluminum Tube to 3/8” Aluminum TubeQTY: 2




ACR-0625/16” Aluminum Tube Block-OffQTY: 2





AC-6-05 Clamp Cage#6 Hose(5/16” / 8mm)QTY: 2

ACR-028 Abrasive PadQTY: 1




AC-6-06 Cinch Clamp#6 Hose(5/16” / 8mm)QTY: 2




ACR-029 Anaerobic Sealing CompoundQTY: 1

1125700 REV A

*For best repair use AGS part number ACR-050 Reduced Barrier Hose





SPLICE-LOK™ A/C REPAIR ASSORTMENT ACRK-3

ACR-045Body5/8” and 3/4” TubingQTY: 2

AC-1-03Seal 5/16”QTY: 2

AC-1-04Ferrule 5/16”QTY: 2

AC-2-03Seal3/8”QTY: 2

AC-2-04Ferrule3/8”QTY: 2



AC-6-05Clamp Cage#6 Hose (5/16” / 8mm)QTY: 2

AC-6-06Cinch Clamp#6 Hose (5/16” / 8mm)QTY: 2











ACR-046 Body5/16”, 3/8”, and 1/2” TubingQTY: 2

ACR-055 Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #6 Hose (5/16” / 8mm)QTY: 2


*For best repair use AGS part number ACR-051 Reduced Barrier Hose *For best repair use AGS part number ACR-053 Reduced Barrier Hose


ACR-056Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #8 Hose (13/32” / 10mm)QTY: 2

ACR-057Body Tube To Hose5/16”, 3/8”, and 1/2” Tubing to #10 Hose (1/2” / 13mm)QTY: 2

ACR-058Body Tube To Hose5/8” and 3/4” Tubing to #12 Hose (5/8” / 16mm)QTY: 2

ACR-060 Block-Off5/16”, 3/8”, 1/2”QTY: 2

ACR-061 Block-Off5/8” and 3/4”QTY: 2

1125240 REV A

LINE REPAIR SYSTEMS

28

ASSORTMENT CONTENTS (Continued)


Exte

rnal

Mal

e ACRK-2

ACR-033

ACR-034

ACR-035

ACR-036

ACR-037

ACR-038

ACR-039

ACR-040

ACR-041

ACR-042

ACR-043

ACR-044

SPLICE-LOK™ / KLEDGE-LOK™ A/C Repair Ends O-Ring Assortment

A/C Condenser Repair End - 3/8 External Male O-Ring




A/C Condenser Repair End - 3/8 Internal Male O-Ring




A/C Condenser Repair End - 3/8 External Female O-Ring




1

5

5

5

5

5

5

5

5

5

5

5

5

NA

2

2

2

2

2

2

2

2

2

2

2

2

Inte

rnal

Mal

eEx

tern

al F

emal

e

FG Case QtyFG Part # Description

Hos

e ACR-050

ACR-051

ACR-052

ACR-053

ACR-054

10’ Coil Reduced Barrier A/C Repair #6 Hose (5/16" / 8mm)




A/C Hose Cutting Tool

1

1

1

1

1Hos

e Cu

tter


KLED

GE-

LOK

/ ACR

K-ST

ARTE

R

SLK-2

ACRK-STARTER

SLKFR

KLEDGE-LOK™ Tubing Repair Tool with Jaws

SLK-2 and 7 repair unions for tube-to-tube repairs from 5/16" – 3/4"

KLEDGE-LOK™ Nylon Fuel Line Repair

1

NA

NA


ACR

K-SW

EDG

E

ACRK-SWEDGE

ACRK-SPLICE

ACRK-DELUXE

ACRK-500

KLEDGE-LOK™ Master Kit with Free Storage Cabinet(Includes: SLK-2, ACRK-1, ACRK-2, ACRK-4, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)

SPLICE-LOK™ Master Kit with Free Storage Cabinet (Includes: ACRK-1, ACRK-2, ACRK-3, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)

SPLICE-LOK™ / KLEDGE-LOK™ Master Kit with Free Storage Cabinet (Includes: SLK-2, ACRK-1, ACRK-2, ACRK-3, ACRK-4, ACR-50, ACR-51, ACR-52, ACR-53, ACR-054, ACRK-500)

SPLICE-LOK™ / KLEDGE-LOK™ Storage Cabinet

1

1

1

1

ACR

K-SP

LICE

ACR

K-D

ELU

XE

Tube-to-Tube Repair

Hose-to-Tube Repair

Line Block-Off Repair

29

LINE REPAIR SYSTEMS

ASSORTMENT CONTENTS (Continued)


A/C

Rep

air K

itVi

ton®

Sea

lTu

be-t

o-H

ose

Cinc

h Cl

amp

ACRK-3

ACRK-045C

ACRK-046C

ACR-045

ACR-046

AC-1-03

AC-1-04

AC-2-03

AC-2-04

AC-3-03

AC-3-04

AC-4-03

AC-4-04

AC-5-03

AC-5-04

ACR-055

AC-6-05

AC-6-06

ACR-056

AC-7-05

AC-7-06

ACR-057

AC-8-05

AC-8-06

ACR-058

AC-9-05

AC-9-06

ACR-060

ACR-061

SPLICE-LOK™ A/C Repair Assortment

SPLICE-LOK™ A/C Repair 5/8" & 3/4" Kit

SPLICE-LOK™ A/C Repair 5/16", 3/8", & 1/2" Kit

SPLICE-LOK™ Union Body for 5/8" & 3/4" Tube

SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube

SPLICE-LOK™ Viton® Seal for 5/16" - 2 per bag

SPLICE-LOK™ Brass Ferrule for 5/16" - 2 per bag









SPLICE-LOK™ Union Body for 5/16", 3/8", & 1/2" Tube to #6 A/C Hose

5/16" Clamp Locator Cage for #6 A/C Hose

5/16" Clamps for #6 A/C Hose - 2 per bag







SPLICE-LOK™ Union Body for 5/8" & 3/4" Tube to #12 A/C Hose



SPLICE-LOK™ Block-Off Body for 5/16", 3/8", & 1/2" Tube

SPLICE-LOK™ Block-Off Body for 5/8" & 3/4" Tube

1

5

5

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

NA

NA

NA

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

Uni

on B

ody

Bras

s Fe

rrul

eCl

amp

Cage

Bloc

k-O

ff

• Permanent Leak Repair• Saves Time and Money• Use Standard Hand Tools• Straight or Reducing

See the video!

BEFORE

AFTER

RELATED LUBRICANTS AND CHEMICALS

Sil-Glyde® Brake Lubricant is a silicone-based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to over 425˚F (218˚C), which means it won’t burn-off like other brake noise products. Using AGS brake lubricant is one of the keys to eliminating disc brake squeal.

Thread-Magic® Avoid stuck plugs and bolts. Assure easy removal on aluminum and cast iron components to prevent seizing, galling, and damage during disassembly. Suggested Applications: Spark plugs, bolts, and fasteners.

Silicone Brake Fluid is specially formulated, high-temperature fluid required in some modern brake systems. Reduces corrosion in the braking system. Provides even braking performance in temperatures from -75˚F to +600˚F. Recommended for Domestic, European, and Japanese vehicles. Excellent for motorcycles, heavy duty vehicles, and trailer units.

Mr. Penetrant® Proven and trusted to be more effective in breaking-up rust than spray-on petroleum products. Innovative “Squirt On” Applicator gets product quickly where it needs to go. Perfect for chassis bolts that are rusted in place.

Oil Drain Plug and Filter Thread Sealant Prevent engine damaging oil leaks with AGS Thread Sealant. Apply to threads on all types of all filters and oil drain plugs to prevent freeze-ups. Allows for easier, safer, and trouble-free removal.

BK-1 BK-1D DISPLAY BK-8 BK-12

MR-2

Cerami-Glyde™ is a hi-performance brake lubricant for all contact points. It is a new formula for ceramic pads that prevent brake noise.

SBF-12 SBF-17 SBF-18

TM-1TMK-1 TMP-1

ODP-1

CM-1

BK-4

CM-4 CM-8

Scan to view more information on the complete line of AGS specialty lubricants

AGS CompanyP.O. Box 729, Muskegon, MI 49443, U.S.A. • Toll Free 1-800-253-0403 Toll Free in Michigan & Canada 800-735-0403 • FAX (231) 733-1784 • www.agscompany.com

C-690 REV HPrinted in USA

For additional innovative products from AGS, go to www.agscompany.com or see the following catalogs:

C-1180 – Tool Innovations Revolutionary Solutions for Everyday Problems

C-1040 – Specialized Lubricants Specialty Greases, Aerosols, Additives

C-1090 – Line Repair SystemsFast, Economical Tube and Hose Repair

C-1010 – Oil Drain Plugs More Coverage, Fewer Part Numbers, Superior Features, Higher Quality

www.xforcetools.com

AGS introduces a range of amazing and innovative fastening, gripping, and flaring tools

AGS line repair systems improves line repair technology for all air conditioning and coolant

For additional information on ourXForce tool products, visit:

TM

360º WRAP-AROUND WRENCH • BYBRAKE AND FUEL LINE WRENCH .

TM

BY

RATCHETING FLARE NUT WRENCH LOCKING NUT DRIVER PRO

Documents

2013-14 Automotive Fluid Transfer Systemspbwdist.com/catalogs/AGS auto fluid transfer systems-2013-14.pdf · Copper brazed bond Electric Zinc Plating Double-Wall Close tolerance,