Upload
ark-corporation
View
280
Download
6
Tags:
Embed Size (px)
DESCRIPTION
Welcome to Ark's New Catalogue. Everything you need in quality Australian Made trailer parts, towing gear and portable power. www.arkcorp.com.au
Citation preview
Australia’s widest range of towing & trailer parts
Proudly 100% Australian owned
We’ve been Australia’s specialists in towing & trailer parts for over 30 years. We began by making tow balls in 1978 and now have over 500 specialist parts and accessories. We are proudly 100% Australian owned, family run and 100% independent. What’s more, we pride ourselves on our ability to innovate, not imitate and have had this recognised via International Innovation Awards. So it’s not surprising that we were the first to introduce many of the innovative towing & trailer parts Australians now take for granted – like the adjustable jerry can holder, tow bar shin protectors and quick assembly 7 pin flat connectors.
It’s also not surprising that Ark parts are the first choice of Australia’s specialist trailer manufacturers when they are building new trailers. They’re looking for the best quality parts at the most competitive prices – parts that will last the distance, rather than fall apart in a few months.
So I invite you to look through this catalogue and visit our website at www.arkcorp.com.au – we’re almost certain to have what you’re looking for!
Richard ArakelianFounder and MDArk Corporation
Trailer Parts
Towing Gear
Portable Power
4
NE
W P
RO
DU
CT
S
Page 121
Page 32
NewLED Ultra Slim Lamp
NewElectric Brake Magnet
Page 81
Page 114
NewTrailer Tailgate Latch
NewShin Protector with Ball Cover
Page 15
New15” Off Road Trailer Wheels
Page 91
NewElectric Brake Controllers & Breakaway Kit
Page 92
Page 68
NewRated Dee Shackles
Page 25
New7 Pin Flat Socket with Reed Switch
5
Page 90
New12” Hub Drum
Page 90
New10” Hub Drum with Parallel Bearings
NE
W P
RO
DU
CT
S
NewWinch Support & Main Rail U-bolt
Page 123
Page 112
New65mm Zinc Plated Dust Cover
NewHeavy Duty Fish Plate
NewHeavy Duty U-bolt
Page 94
Page 113
NewHeavy Duty Axle Pad
Page 110
NewTandem Spring Kits
Page 105
Turn your 12V battery intoa Portable Power Station
Patents and registered designs applied for.
(See page 126)
• The ArkPak is an intelligent Smart Charger Power Pack, which houses up to a 130Ahr battery. It is designed to provide portable 24 hour power where there isn’t any, and was judged one of the Best New International Products for 2012 out of a field of over 2,000 innovative new products submitted at the 2012 SEMA Automotive show in Las Vegas.
• Building on the original revolutionary and highly affordable Ark Powerpack, the ArkPak takes a giant leap forward, offering many premium features and benefits un-matched by any other single device in the world.
The World’s MostAdvanced Battery Box
To watch the video,scan this QR code
CO
NT
EN
TS
Contents
Trailer Parts
Electric Brake Controllers Page 19
Hitch Pin Locks Page 16
Recovery Equipment Page 17
Shin Protectors & Hitch Covers Page 14-15
ArkPak Page 126 - 127
Battery Boxes Page 129
Powerpack Page 128
Page 130 - 131
Security Locks Page 60 - 61
Shackles Page 68
Sockets & Brackets Page 24 - 28
Springs & Accessories Page 106 - 113
Trailer Adaptors Page 28 - 29
Trailer Couplings & Accessories Page 69 - 73
Trailer Hub Accessories Page 94 - 95
Trailer Hub Drums Page 90
Trailer Hubs & Disc Hubs Page 84 - 89
Trailer Lights & Light Boards Page 31 - 41
Trailer Plugs Page 22 - 23
Trailer Reflectors Page 42
Trailer Tailgate Accessories Page 114
Trailer Wheels Page 91
Axles & Accessories Page 99 - 105
Bike Carriers Page 124
Boat Accessories Page 64 - 67 & 115
Boat Rollers & Brackets Page 116 - 122
Boat Winches Page 62 - 63
Brake Controllers & Break-away kits Page 92 - 93
Brake Parts & Accessories Page 74 - 83
Cables & Accessories Page 43 - 49
ECU Harnesses Page 30
Jerry Can & Gas Bottle Holders Page 96 - 98
Jockey Stands & Corner Steadies Page 56
Jockey Wheel Accessories Page 57 - 59
Jockey Wheels Page 50 - 55
Marine U-bolts Page 123
Tow Ball Mounts & Covers Page 12 - 13
Tow Balls Page 10
Towing Kits & Accessories Page 11
Tow Lamps Page 18
Towing Gear
Portable Power
Merchandising & POS
8
Australia’s onlymagnetic trailer plug
Magnetically attaches to your drawbar to stop it dangling and prevent damage.
PLU
GS
AN
D S
OC
KE
TS
TOW
ING
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
Strong brass terminals
Quick assembly housing
Also available in:
7 Pin large round
7 Pin small round
Built-in magnets
Towing Gear
• Electric Brake Controllers
• Hitch Pin Locks
• Recovery Equipment
• Shin Protector & Hitch Covers
• Tow Ball Covers
• Tow Ball Mounts
• Tow Balls
• Towing Kits & Accessories
• Tow Lamps
Page 19
Page 16
Page 17
Page 14 - 15
Page 13
Page 12
Page 10
Page 11
Page 18
10
TOW
BA
LLS
TOW
ING
Tow BallsPART NO: PACK TyPE: FINISH:
TB35CB DISPLAY CHROME
TB35C BULK CHROME
TB35BB DISPLAY BLACK
3.5 Ton. 50mm Tow BallShank size 7/8” diameter x 51mm length, towing capacity 3500kg. Complies to AS4177.2 - 2004
PART NO: PACK TyPE:
TB178C BULK
2.27 Ton. 1 7/8” Chrome Plated Tow BallShank size 7/8” diameter x 51mm length, towing capacity 2270kg.
PART NO: PACK TyPE:
TB505 BULK
3.5 Ton. 50mm Chrome Plated Tow BallShank size 1” diameter x 130mm length, towing capacity 3500kg.
PART NO: PACK TyPE: FINISH:
TB3562C BULK CHROME
TB3562z BULK zINC
3.5 Ton. 50mm Tow BallShank size 7/8” diameter x 62mm length, towing capacity 3500kg. Complies to AS4177.2 - 2004
PART NO: PACK TyPE: FINISH:
TBF3562C BULK CHROME
3.5 Ton. 50mm Tow Ball with Flat FlangesShank size 7/8” diameter x 62mm length, towing capacity 3500kg. Complies to AS4177.2 - 2004
PART NO: PACK TyPE:
TB501 BULK
3.5 Ton. 50mm Chrome Plated Tow BallShank size 1” diameter x 52mm length, towing capacity 3500kg.
PART NO: PACK TyPE:
TB4570 BULK
4.5 Ton. 70mm Plain Steel Tow BallShank size 1 1/4” diameter x 68mm length, towing capacity 4500kg.
PART NO: PACK TyPE:
TB5080C BULK
2.5 Ton. 50mm Chrome Plated Tow BallShank size 7/8” diameter x 80mm length, towing capacity 2500kg.
PART NO: PACK TyPE:
TB50HR1 BULK
2 Ton. 1” Hi Rise 50mm Chrome Plated Tow BallShank size 7/8” diameter x 51mm length, towing capacity 2000kg.
TB35CB TB35BB
With flat flanges
TB3562C TB3562Z
TB35C
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
51mm
50mm
12mm
7/8”
50mm
12mm
62mm
7/8”
50mm
47mm
12mm
62mm
7/8”
50mm
12mm
80mm
7/8”
50mm
12mm
52mm
1”
50mm
12mm
130mm
1”
70mm
17mm
68mm
1 1/4”
1 7/8”
17mm
51mm
1 1/4”
50mm
25mm
51mm
7/8”
11
TOW
ING
KIT
S &
AC
CE
SS
OR
IES
TOW
ING
Tow kits
PART NO: PACK TyPE:
BCS50 BLISTER PACK
Complete Chrome Tow KitConsists of shin protector, 3.5 Ton. 50mm chrome tow ball and chrome tow ball cover. Tow Ball shank size 7/8” diameter x 51mm length, towing capacity 3500kg. Complies to AS4177.2 - 2004
PART NO: PACK TyPE:
CCB50 BLISTER
3.5 Ton. 50mm Chrome Tow Ball & Chrome Tow Ball Cover with Spring ClipTow ball shank size 7/8” diameter x 51mm length, towing capacity 3500kg. Complies to AS4177.2 - 2004
Towing kits consist of 50mm x 50mm tow ball mount, 50mm chrome tow ball, hitch cover and chrome hitch pin with “R” clip complete with a plastic storage case
PART NO: PACK TyPE:
TK160C CASE
Towing Kit with 160mm Tow Ball Mount
20.0ø16.5
50.0
80.060.0
160.0
ø22.5
PART NO: PACK TyPE:
TK190C CASE
Towing Kit with 190mm Tow Ball Mount
20.0
ø22.5ø16.5
50.0
80.0
190.090.0
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Towing Multi-SpannerPART NO: PACK TyPE:
TBS41B BLISTER
Towing Multi-spanner3 Tools in one. Comfort grip. Chrome plated finish.
Tightening and removing tow ball Tightening and removing axle nutTightening and removing “D” shackle
12
Tow Ball Mounts
PART NO: PACK TyPE:
TBH160 BULK
TBH160D DISPLAY INC. TOW BALL
160mm Tow Ball Mount
PART NO: PACK TyPE:
TBH190 BULK
TBH190D DISPLAY INC. TOW BALL
190mm Tow Ball Mount
PART NO: PACK TyPE:
TBH280 BULK
TBH280D DISPLAY INC. TOW BALL
280mm Tow Ball Mount
**Towing capacity of Ark Tow Ball Mount may exceed towing capacity of tow bar or vehicle, always refer to the towing capacity of tow bar and vehicle.
**Towing capacity of Ark Tow Ball Mount may exceed towing capacity of tow bar or vehicle, always refer to the towing capacity of tow bar and vehicle.
80
50
280
180
20
ø22.5ø16.5
20ø16.5
50
8060
160
ø22.5
20
ø22.5ø16.5
50
80
19090
Ark’s range of tow ball mounts suit 50mm x 50mm hitch receivers, have a high quality black powder coat finish, a 3500kg maximum towing capacity** and all comply to AS4177.1-2004.
270
150
70
220
300
PART NO: PACK TyPE:
TBHA30 BULK
TBHA30D DISPLAY INC. TOW BALL
Adjustable Tow Ball Mount • Designed for simple levelling of trailer to vehicle• 5 Hole adjustable ball mount• Suitable for 4x4’s• 2500kg Maximum towing capacity**• Complies to AS4177.1-2004
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TOW
BA
LL M
OU
NT
STO
WIN
G
13
TOW
ING
TOW
BA
LL CO
vE
RS
TOW
ING
Tow Ball Covers
PART NO: PACK TyPE:
PCC50D DISPLAY - BOx OF 12
PCC50B BLISTER
Chrome Tow Ball Cover with Spring ClipSuits 50mm and 17/8” tow balls.
PART NO: PACK TyPE:
PBC50D DISPLAY - BOx OF 12
PBC50B BLISTER
Black Tow Ball Cover with Spring ClipSuits 50mm and 17/8” tow balls.
PART NO: PACK TyPE:
PvC50D DISPLAY - BOx OF 12
Black PvC Tow Ball CoverSuits 50mm and 17/8” tow balls.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Shin Protectors
PART NO: PACK TyPE:
TPB11 BLISTER
TP11 DISPLAY - BOx OF 18
Shin ProtectorMade from soft rubber, fits securely over tow bar goose neck. Black finish.
PART NO: PACK TyPE:
TP/L BULK
Personalised Black Shin ProtectorMade with your company’s name or logo for advertising purposes. MOQ 500 pieces.
TP11
TPB11
14
SH
IN P
RO
TE
CTO
R &
HIT
CH
CO
vE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TOW
ING
Designed in Australia. Patent applied for.
15
Hitch Receiver Covers
Hitch Collar
PART NO: FINISH: PACK TyPE:
HCC80 CHROME BULK
HCC80B CHROME BLISTER
HC80 BLACK BULK
Hitch Receiver CoverFastens permanently over all 50mm hitches, designed with a lid for convenience.
PART NO: PACK TyPE:
HCL80A BULK
Hitch CollarSuits 50mm hitches.
PART NO: PACK TyPE:
HCL80/L BULK
Hitch CollarCan be personalised with company logo. MOQ 500 pieces.
PART NO: FINISH: PACK TyPE:
HC50B BLACK BLISTER
HCC50B CHROME BLISTER
Hitch CoverHitch cover suits 50mm x 50mm hitches, quick clip-on design. Mounts with or without hitch pin.
PART NO: PACK TyPE:
HC50/L BULK
Personalised Hitch CoverHitch cover can be personalised with company logo. MOQ 500 pieces.
SH
IN P
RO
TE
CTO
R &
HITC
H C
Ov
ER
S
Shin Protector with Tow Ball Cover
PART NO: PACK TyPE:
SPC50P BULK
Shin Protector with Ball CoverCan be personalised with company name. MOQ 500 pieces.
PART NO: PACK TyPE:
SPC50B BLISTER
SPC50D DISPLAY - BOx OF 6
Shin Protector with Ball Cover
Unique design allows ball cover to be secured while towing. Suits 50mm and 1 7/8” tow balls.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TOW
ING
TOW
ING
SPC50D
SPC50B
16
HIT
CH
PIN
LO
CK
S Hitch Pin Locks
PART NO: PACK TyPE:
PL80 BULK
PL80B BLISTER
Hitch Pin Lock. Slim Line Design.Dual purpose, can be used with or without lock, suits 2” x 2” class 4 receiver from 65mm to 80mm, comes with spring clip for extra protection. Chrome plated finish. Towing rating 3500kg.
PART NO: PACK TyPE:
HP80 BULK
HP80B BLISTER
Hitch Pin with “R” ClipSuits 2” x 2” class 4 receiver from 65mm to 80mm. Chrome plated finish. Towing rating 3500kg.
PART NO: PACK TyPE:
RC75B BLISTER
R ClipSuits a 16mm diameter hitch pin. Chrome plated finish. Provides extra security.
PART NO: PACK TyPE:
PLS80 BULK
PLS80B BLISTER
Hitch Pin Lock. Square Lock Design.Dual purpose, can be used with or without lock, suits 2” x 2” class 4 receiver from 65mm to 80mm, comes with spring clip for extra protection. Chrome plated finish. Towing rating 3500kg.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TOW
ING
17
RE
CO
vE
RY
EQ
UIP
ME
NT
Recovery Equipment
PART NO: PACK TyPE:
SB8D DISPLAY
Snatch BlockHeavy duty 8000kg pulling capacity. Accepts up to 13mm wire cable. Suitable for hydraulic & electric winches. With greasable nipple.
PART NO: PACK TyPE:
HRS4D DISPLAY
Hitch Receiver Bracket & ShackleSuits class 4 receiver. 20mm x 4.75 tonne shackle.
PART NO: PACK TyPE:
BSG20D DISPLAY
Bow Shackle 20mmSuitable for hitch receiver brackets 4750kg load capacity. Galvanised finish
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TOW
ING
TOW
ING
18
Magnetic Tow Lamps
PART NO: PACK TyPE:
MLK984 DISPLAY
Magnetic Tow Lamp Kit2 Combination lamps with powerful magnets connected with 8m cable & 7 Pin flat plug in heavy duty carry case. Lamps tilt up to 90 degree angle, ideal for use on towed vehicles, galvanised mounting brackets supplied. Lamps comply to ADR.
TOW
LA
MP
S
Electric Break-away Kit
PART NO: PACK TyPE:
EBK26 BULK
“Interceptor” Break-Away SystemSuitable for 2, 4 and 6 wheel brake systems, interceptor acts as both a battery tester and battery charging system which is built to bring trailers safely to a stop should a trailer be disconnected while driving.
PART NO: PACK TyPE:
EBS24 BULK
Electric Break-away Switch
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TOW
ING
19
Electric Brake Controllers
PART NO: PACK TyPE:
EBCx4 BULK
Electric Brake Controller with LED IndicatorCompact power: strong and dependable time-based trailer braking in a small, sleek design.
Infinite adjustability: the X4 features infinite adjustability in both output and ramp time settings.
• Supports 2 to 6 brake trailers
• No leveling required
• Reverse wire protection
• Operates seamlessly with electric over hydraulic braking systems
• Solid state dependability
• Self diagnostic
• Does not interfere with anti-lock brakes, cruise control or other vehicle electrical systems.
PART NO: PACK TyPE:
EBCx8 BULK
Electric Brake Controller with Digital DisplayCompact power: strong and dependable the X8 is as much as 33% smaller than other controls.
Faster & stronger: the X8 is twice as fast as similar controls.
• Supports 2, 4, 6 or 8 brake trailers
• No leveling required
• Reverse wire protection
• Operates seamlessly with electric over hydraulic braking systems
• F.E.T. (Field Effect Transistor) technology
• Comprehensive diagnostic error codes
• Does not interfere with anti-lock brakes, cruise control or other vehicle electrical systems.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
ELE
CT
RIC
BR
AK
E C
ON
TR
OLLE
RS
TOW
ING
TOW
ING
1
2
4
5 6
3
95mm
75mm
25m
m
1
2
4
56
3
1. Easy-mount bracket2. Harness plug3. Ramp time slider
4. Output level knob5. Dual LED indicators6. Manual override lever
1. Easy-mount bracket2. Harness plug3. Ramp time slider
4. Output level knob5. Digital display6. Manual override lever
20
TR
AIL
ER
PA
RT
S
All your trailer needs
Ark have been Australia’s specialists in towing & trailer parts for over 30 years. We began by making tow balls and now have over 500 specialist parts and accessories. We are 100% Australian owned and 100% independent. What’s more, we pride ourselves on our ability to innovate, not imitate. So it’s not surprising that we were the first to introduce many of the innovative towing & trailer parts Australians now take for granted - like the adjustable jerry can holder, tow ball shin protector and the quick assembly 7 pin flat connectors.
It’s also not surprising that Ark parts are the first choice of Australia’s specialist trailer manufacturers when they’re building new trailers. Like you, they’re looking for the best quality parts at the most competitive prices.
Innovation, not imitation
www.arkcorp.com.au
into
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
Trailer Parts
• Axles & Accessories
• Bike Carriers
• Boat Accessories
• Boat Rollers & Brackets
• Boat Winches
• Brake Controllers & Break-Away Kit
• Brake Parts & Accessories
• Cables & Accessories
• ECU Harnesses
• Jerry Can & Gas Bottle Holders
• Jockey Stands & Corner Steadies
• Jockey Wheel Accessories
• Jockey Wheels
• Marine U-bolts
• Security Locks
• Shackles
• Sockets & Brackets
• Springs & Accessories
• Trailer Adaptors
• Trailer Couplings & Accessories
• Trailer Hub Accessories
• Trailer Hub Drums
• Trailer Hubs & Disc Hubs
• Trailer Light Boards
• Trailer Lights
• Trailer Plugs
• Trailer Reflectors
• Trailer Tailgate Accessories
• Trailer Wheels
Page 99 - 105
Page 124
Page 64 - 67 & 115
Page 116 - 122
Page 62 - 63
Page 92 - 93
Page 74 - 83
Page 43 - 49
Page 30
Page 96 - 98
Page 56
Page 57 - 59
Page 50 - 55
Page 123
Page 60 - 61
Page 68
Page 24 - 28
Page 106 - 113
Page 28 - 29
Page 69 - 73
Page 94 - 95
Page 90
Page 84 - 89
Page 40 - 41
Page 31 - 39
Page 22 - 23
Page 42
Page 114
Page 91
22
TR
AIL
ER
PLU
GS
PART NO: PACK TyPE: REGION:
PP60 BULK QLD & WA
PB60 BLISTER QLD & WA
6 Pin Quick Assembly Small Round Trailer PlugIncludes magnet
PP70 BULK QLD & WA
PB70 BLISTER QLD & WA
7 Pin Quick Assembly Small Round Trailer PlugIncludes magnet
MAGNET
Trailer Plugs
MP70 BULK QLD & WA
MP70B BLISTER QLD & WA
7 Pin Small Round Metal Trailer Plug
PART NO: PACK TyPE: REGION:
MP60B BLISTER QLD & WA
6 Pin Small Round Metal Trailer Plug
PART NO: PACK TyPE: REGION:
FPP7 BULK AUS & Nz
FPB7 BLISTER AUS & Nz
7 Pin Quick Assembly Flat Trailer PlugIncludes magnet
PART NO: PACK TyPE:
PHB7 BLISTER
7 Pin Flat Trailer Plug HolderDesigned for use with flat trailer plugs without magnets.
MAGNET
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
23
Trailer Plugs
PART NO: PACK TyPE: REGION:
FPP12 BULK AUS & Nz
FPB12 BLISTER AUS & Nz
12 Pin Trailer PlugSuitable for high current caravan / trailer appliances
PART NO: PACK TyPE: REGION:
LPP5B BLISTER vIC, TAS, NT & Nz
5 Pin Large Round Plastic Trailer PlugIncludes magnet
LPP7 BULK vIC, TAS, NT & Nz
LPP7B BLISTER vIC, TAS, NT & Nz
7 Pin Large Round Plastic Trailer PlugIncludes magnet
MAGNET
PART NO: PACK TyPE: REGION:
LMP5B BLISTER vIC, TAS, NT & Nz
5 Pin Large Round Metal Trailer Plug
LMP7 BULK vIC, TAS, NT & Nz
LMP7B BLISTER vIC, TAS, NT & Nz
7 Pin Large Round Metal Trailer Plug
TR
AILE
R P
LUG
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
24
Sockets: QLD & WAPART NO: PACK TyPE:
SP70 BULK
SB70 BLISTER
7 Pin Small Round Plastic SocketIncludes mounting screws, washers and nuts.
PART NO: PACK TyPE:
SP60 BULK
SB60 BLISTER
6 Pin Small Round Plastic SocketIncludes mounting screws, washers and nuts.
PART NO: PACK TyPE:
SP70P BULK
7 Pin Small Round Plastic Socket
Can be personalised with company name or logo. MOQ 500 pieces.
PART NO: PACK TyPE:
MS60B BLISTER
6 Pin Small Round Metal SocketIncludes mounting screws, washers and nuts.
PART NO: PACK TyPE:
MS70 BULK
MS70B BLISTER
7 Pin Small Round Metal SocketIncludes mounting screws, washers and nuts.
PART NO: PACK TyPE:
SL70K BULK
7 Pin Small Round Plastic Socket KitConnected to 1.5m Round cable. Includes mounting screws, washers and nuts, 7 wire clips, 2 x 16 x 16 self drilling screws and angle mounting bracket to suit.
PART NO: PACK TyPE:
SL702K BULK
7 Pin Small Round Plastic Socket KitConsists of 7 pin small round socket connected to 2m round cable. Includes mounting screws, washers and nuts, 7 wire clips, 2 x 16 x 16 self-drilling screws and angle mounting bracket to suit.
PART NO: PACK TyPE: CABLE:
SL60 BULK 1.5M
SKB60 BLISTER 1.25M
6 Pin Small Round Plastic SocketConnected to round cable. Includes mounting screws, washers and nuts.
PART NO: PACK TyPE: CABLE:
SL70 BULK 1.5M
SKB70 BLISTER 1.25M
7 Pin Small Round Plastic SocketConnected to round cable. Includes mounting screws, washers and nuts.
PART NO: PACK TyPE:
SL702 BULK
7 Pin Small Round Plastic SocketConnected to 2m Round cable. Includes mounting screws, washers and nuts.
SO
CK
ET
S &
BR
AC
KE
TS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
25
PART NO: PACK TyPE:
BSS7 BULK
BSS7B BLISTER
7 Pin Small Round Boot SocketConnected to 1.5m of flat cable
PART NO: PACK TyPE:
BSS BULK
7 Pin Small Round Boot Socket
PART NO: PACK TyPE:
C360 BULK
B360 BLISTER
Flat Mounting Bracket Suitable for small round plastic and metal socket.
PART NO: PACK TyPE:
C90 BULK
B90 BLISTER
Angle Mounting Bracket Suitable for small round plastic and metal socket.
Sockets and Socket Brackets: QLD & WA
Sockets: Australia & New ZealandPART NO: PACK TyPE:
FSP7 BULK
FSB7 BLISTER
7 Pin Quick Assembly Flat Socket
PART NO: PACK TyPE:
FSPR7 BULK
New 7 Pin Flat Trailer Socket with Reed Switch
PART NO: PACK TyPE:
FSP7P BULK
7 Pin Quick Assembly Flat Socket
Can be personalised with company name or logo. MOQ 500 pieces.
PART NO: PACK TyPE:
FSP12 BULK
FSB12 BLISTER
12 Pin Trailer socket• Suitable for high current caravan / trailer appliances. • First row of 7 pins can accept a normal 7 pin flat plug
for use with standard trailer electricals.
SO
CK
ET
S &
BR
AC
KE
TS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
26
Sockets: Australia & New Zealand
PART NO: PACK TyPE: CABLE:
FKP7 BULK 1.6M
FKB7 BLISTER 1.25M
FKP72 BULK 2.0M
7 Pin Flat Socket Connected to round cable.
PART NO: PACK TyPE:
BSF7 BULK
BSF7B BLISTER
7 Pin Flat Boot SocketConnected to 1.5m flat cable
PART NO: PACK TyPE:
LPS7 BULK
LPS7B BLISTER
7 Pin Large Round Plastic SocketIncludes mounting screws, washers and nuts.
PART NO: PACK TyPE:
LPS5B BLISTER
5 Pin Large Round Plastic Socket
PART NO: PACK TyPE:
LPS7P BULK
7 Pin Large Round Plastic Socket
Can be personalised with company name or logo. MOQ 500 pieces.
PART NO: PACK TyPE:
LMS5B BLISTER
5 Pin Large Round Metal Socket
LMS7 BULK
LMS7B BLISTER
7 Pin Large Round Metal SocketIncludes mounting screws, washers and nuts.
Sockets: VIC, SA, NT & New Zealand
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
SO
CK
ET
S &
BR
AC
KE
TS
TR
AIL
ER
S
27
PART NO: PACK TyPE:
LSL7 BULK
7 Pin Large Round Plastic Socket Connected to 1.5m of round cable with mounting screws, washers & nuts.
PART NO: PACK TyPE:
BSL7 BULK
BSL7B BLISTER
7 Pin Large Round Boot Socket KitConnected to 1.5m flat cable
PART NO: PACK TyPE:
LAB90 BULK
LAB90B BLISTER
Angle Mounting Bracket Suitable for large round plastic & metal socket.
PART NO: PACK TyPE:
LAB360 BULK
LAB360B BLISTER
Flat Mounting Bracket Suitable for large round plastic & metal socket.
PART NO: PACK TyPE:
LSK7B BLISTER
7 Pin Large Round Plastic SocketConnected to 1.25m of round cable
PART NO: PACK TyPE:
BSL BULK
7 Pin Large Round Boot Socket
Sockets: VIC, SA, NT & New Zealand
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
SO
CK
ET
S &
BR
AC
KE
TS
TR
AILE
RS
28
Mounting Brackets
HMB50
BMB78
LAB90C90
PART NO: PACK TyPE:
HMB50 BULK
Hitch Mount BracketSecures to hitch with U-bolt, includes U-bolt, mounting screws, washers and nuts. Suitable for all sockets.**
PART NO: PACK TyPE:
BMB78 BULK
Ball Mount BracketSecures to ball mount by tow ball, includes mounting screws, washers and nuts. Suitable for all sockets.**
**Additional brackets necessary to fit round sockets:Part no. LAB90 - Large round socket. Refer to page 27.Part no. C90 - Small round socket. Refer to page 25.
Trailer Adaptors: NSW, QLD & WA
PART NO: PACK TyPE:
6S27P BLISTER
Connects 6 Pin small round socket on vehicle to 7 Pin small round plug on trailer.
7S26P BLISTER
Connects 7 Pin small round socket on vehicle to 6 Pin small round plug on trailer.
PART NO: PACK TyPE:
6S2FP BLISTER
Connects 6 Pin small round socket on vehicle to 7 Pin flat plug on trailer.
7S2FP BLISTER
Connects 7 Pin small round socket on vehicle to 7 Pin flat plug on trailer.
PART NO: PACK TyPE:
FS26P BLISTER
Connects 7 Pin flat socket on vehicleto 6 Pin small round plug on trailer.
FS27P BLISTER
Connects 7 Pin flat socket on vehicleto 7 Pin small round plug on trailer.
BR
AC
KE
TS
& T
RA
ILE
R A
DA
PTO
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
29
Trailer Adaptors: VIC, TAS, SA & NZ
Trailer Adaptors: Australia & New Zealand
PART NO: PACK TyPE:
5LS2FP BLISTER
Connects 5 Pin large round socket on vehicle to 7 Pin flat plug on trailer.
PART NO: PACK TyPE:
7LS26P BLISTER
Connects 7 Pin large round socket on vehicle to 6 Pin small round plug on trailer
PART NO: PACK TyPE:
6S27LP BLISTER
Connects 6 Pin small round socket on vehicle to 7 Pin large round plug on trailer.
PART NO: PACK TyPE:
5LS27LP BLISTER
Connects 5 Pin large round socket on vehicle to 7 Pin large round plug on trailer.
7LS2FP BLISTER
Connects 7 Pin large round socket on vehicle to 7 Pin flat plug on trailer.
7LS27P BLISTER
Connects 7 Pin large round socket on vehicle to 7 Pin small round plug on trailer
7S27LP BLISTER
Connects 7 Pin small round socket on vehicle to 7 Pin large round plug on trailer.
7LS25LP BLISTER
Connects 7 Pin large round socket on vehicle to 5 Pin large round plug on trailer.
PART NO: PACK TyPE:
FS25LP BLISTER
Connects 7 Pin flat socket on vehicle to 5 Pin large round plug on trailer.
FS27LP BLISTER
Connects 7 Pin flat socket on vehicle to 7 Pin large round plug on trailer.
TR
AILE
R A
DA
PTO
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
30
ECU Harness
PART NO: PACK TyPE:
AHI7 BULK
Inline Harness 7Has the flexibility to adapt its technology to any 7 pin trailer connector.
PART NO: PACK TyPE:
AHP12 BULK
Power 12 HarnessTechnology integrated within 12 pin connector and fitted with a Reed Switch to isolate reverse sensors.
PART NO: PACK TyPE:
SDM16 BULK
10 - 16x16 Self-drilling Screw Suitable for metal.
PART NO: PACK TyPE:
SDM25 BULK
10 - 16x25 Self-drilling Screw Suitable for metal.
PART NO: PACK TyPE:
SDP25 BULK
10 - 12x25 Self-drilling Screw Suitable for plastic.
With the technology advances in computer diagnostics built in vehicles today it is not uncommon for trailer electrics to interfere with such computer systems. Most European vehicles emit pulse current for their lighting which is sometimes not compatible with the LED lighting used on trailers, as they need constant current to operate. Common errors include computer system faults such as flickering symbols on dashboards and flashing external lights. Ark’s range of ECU Harness eliminates such problems, suitable for most vehicles but not suitable for vehicles running CANbus systems.
EC
U H
AR
NE
SS
ES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
Power 12 harness wiring instructions (Part no. AHP12)
Pin Connection Wire colour
1 Left Signal yellow
2 Reversing Signal / Auxiliaries Black
3 Earth return White
4 Right signal Green
5 Service brakes Blue
6 Stop lamps Red
7 Tail, Licence Plate & Side Marker lamps Brown
8 Auxiliaries Orange
9 (not connected)
10 Earth return White / Black
11 Rear Fog lamp Grey
12 Auxiliaries VioletPIN No. 1 to 7 are suitable for standard 7 Pin connection. Refer to wiring diagram above.
PIN No. 8 to 12 are suitable for high current caravan / trailer appliances. Refer to wiring diagram above.
NB: Pink cable connected to 12V power supply (battery) via supplied 10 AMP fuse.
31
Thin is in
Australia’s thinnest, most affordable LED light
− High power SMD LEDs− Polycarbonate lens− Fully submersible− Only 17mm in width
− ADR approved− Long 35cm tail− Concealed mounting screws
Innovation takes many forms…. sometimes it creates unique new products, but in this case our passion for innovation has led us to find an entirely new way of producing a much thinner LED light than had previously been thought possible, for less than the price of a much thicker one.
TR
AILE
R LIG
HT
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
32
TR
AIL
ER
LIG
HT
S
PART NO: PACK TyPE: VOLTS:
SLD10L BULK 12
SLD10ML BULK MULTI
Slimline LED Rear Left Side4 Functions.
PART NO: PACK TyPE: VOLTS:
SLD10R BULK 12
SLD10MR BULK MULTI
Slimline LED Rear Right Side5 Functions. Includes licence plate lamp.
SLD10SB BLISTER 12
Slimline LED Rear Lamp - Set of 25 Functions. Includes licence plate lamp.
100mm x 90mm. Stop/tail, indicator, built-in reflex reflector. 100% submersible. Polycarbonate lens. Prewired and mounting screws. Complies to ADR. 100,000 Hours of operation.
Slimline LEDs
100mm
90m
m
45mm
26mm
100mm
90m
m
45mm
26mm
PART NO: PACK TyPE: VOLTS:
LDU10 BULK 12
LDU10B BLISTER 12
LDU10MB BLISTER MULTI
LED Ultra Slim LampFully submersible. Impact resistant. 100,000 hours of operation. ADR approved. 4 Combined functions: Stop, tail, signal and reflex reflector.
PART NO: PACK TyPE: VOLTS:
LDU15 BULK 12
LDU15B BLISTER 12
LDU15MB BLISTER MULTI
LED Ultra Slim LampFully submersible. Impact resistant. 100,000 hours of operation. ADR approved. 4 Combined functions: Stop, tail, signal and reflex reflector.
LED Ultra Slim Lamp
100mm
90mm
45mm
17mm
150mm
78mm
100mm
17mm
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
33
TR
AILE
R LIG
HT
ST
RA
ILER
S
Slimline LEDs
PART NO: PACK TyPE: VOLTS:
SLD106 BULK 12
100mm x 90mm Slimline LED Rear Lamp - Set of 2Prewired to 6m of tinned cable and stainless steel mounting screws.
PART NO: PACK TyPE: VOLTS:
SLD159 BULK 12
150mm x 80mm Slimline LED Rear Lamp - Set of 2Prewired to 9.5m of tinned cable and stainless steel mounting screws.
Stop/tail, indicator, number plate lamp and built-in reflex reflector. 12V. 100% submersible. Polycarbonate lens. Complies to ADR. Bonus number plate holder.
SLD159
100mm
26mm
150mm
80mm
100mm
26mm
150mm
80mm
100mm
26mm
150mm
80mm
PART NO: PACK TyPE: VOLTS:
SLD15L BULK 12
SLD15ML BULK MULTI
Slimline LED Rear Left Side4 Functions.
PART NO: PACK TyPE: VOLTS:
SLD15R BULK 12
SLD15MR BULK MULTI
Slimline LED Rear Right Side5 Functions. Includes licence plate lamp.
PART NO: PACK TyPE: VOLTS:
SLD15SB BLISTER 12
SLD15MSB BLISTER MULTI
Slimline LED Rear Lamp - Set of 25 Functions. Includes licence plate lamp.
150mm x 80mm. Stop/tail, indicator, built-in reflex reflector. 100% submersible. Polycarbonate lens. Prewired and mounting screws. Complies to ADR. 100,000 Hours of operation.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
34
LED Rear Combination Lamps - 100mm x 100mm
LED Submersible Trailer Lamps
PART NO: PACK TyPE: VOLTS:
LD10L BULK 12
LD10ML BULK MULTI
LED Rear Left Side4 Functions.
PART NO: PACK TyPE: VOLTS:
LD10R BULK 12
LD10MR BULK MULTI
LED Rear Right Side5 Functions, includes licence plate lamp.
PART NO: PACK TyPE: VOLTS:
LD10SB BLISTER 12
LD10MSB BLISTER MULTI
LED Rear Combination Lamp - Set of 25 Functions, includes licence plate lamp.
PART NO: PACK TyPE: VOLTS:
LD10SSB BLISTER 12
LED Submersible Trailer Lamps - Set of 2Left & right,100 x 100mm, connected to 0.5m of cable, tested to water depths of 15m, ADR approved.
100mm x 100mm. Stop/Tail. Indicator. In-built reflex reflector. 100,000 hours rated life. Fully sealed - weather proof. Polycarbonate lens. Prewired and mounting screws. Complies to ADR.
TR
AIL
ER
LIG
HT
ST
RA
ILE
RS
UN
IQUE PRESS TO TEST FEATURE
UN
IQUE PRESS TO TEST FEATURE
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
100mm
100mm
28mm
45mm
35
TR
AILE
R LIG
HT
ST
RA
ILER
S
LED Rear Combination Lamps - 150mm x 80mm
LED Submersible Trailer Lamps
PART NO: PACK TyPE: VOLTS:
LD15R BULK 12
LD15MR BULK MULTI
LED Rear Right Side5 Functions, includes licence plate lamp.
PART NO: PACK TyPE: VOLTS:
LD15L BULK 12
LD15ML BULK MULTI
LED Rear Left Side4 Functions.
PART NO: PACK TyPE: VOLTS:
LD15SB BLISTER 12
LD15MSB BLISTER MULTI
LED Rear Combination Lamp - Set of 25 Functions, includes licence plate lamp.
PART NO: PACK TyPE: VOLTS:
LD15SSB BLISTER 12
LED Submersible Trailer LampsConnected to 0.5m of cable
LD158 BULK 12
LED Submersible Trailer LampsConnected to 8m of cable
150mm x 80mm. Stop/Tail. Indicator. In-built reflex reflector. 100,000 hours rated life. Fully sealed. Polycarbonate lens. Prewired and mounting screws. Complies to ADR.
Set of 2 - left & right. 150mm x 80mm. Tested to water depths of 15m. ADR approved.
UN
IQUE PRESS TO TEST FEATURE
UN
IQUE PRESS TO TEST FEATURE
150mm
84mm
32mm
100mm
89mm
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
36
PART NO: PACK TyPE: COLOUR:
LDM70 BULK RED/AMBER
LDR70 BULK RED
LDW70 BULK WHITE
LDA70 BULK AMBER
LED Marker Lamps Multi-voltPrewired to 0.15 metre cable
LDM725 BULK RED/AMBER
LDR725 BULK RED
LDW725 BULK WHITE
LDA725 BULK AMBER
LED Marker Lamps Multi-voltPrewired to 2.5 metre cable
LDM70B BLISTER RED/AMBER
LDR70B BLISTER RED
LDW70B BLISTER WHITE
LDA70B BLISTER AMBER
LED Marker Lamps Multi-volt - Set of 2Prewired to 0.15 metre cable
Fully sealed. 100,000 hours of operation. ADR approved. Available in red/amber, red, white and amber.
Slimline LED Marker Lamps - Multi-voltT
RA
ILE
R L
IGH
TS
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
28mm
22mm
35mm
60mm
28mm
22mm
35mm
60mm
PART NO: PACK TyPE:
LDN90 BULK
LDN90B BLISTER
LED Licence Plate Lamp Multi-voltFully sealed, 100,000 hours of operation and ADR approved.
LED Licence Plate Lamp - Multi-volt
85 mm
31.1 mm 12.7 mm
59mm
37
LED Work Lamps
Mini LED Work Lamps
PART NO: PACK TyPE:
WLB10B BLISTER
LED Flood LampComplies to ADR as reversing lamp.
PART NO: PACK TyPE:
WLB7B BLISTER
Mini LED Flood LampCompact and powerful. 600 Lumens.
PART NO: PACK TyPE:
WLW10B BLISTER
Marine LED Deck Lamp
Light weight. Polycarbonate lens & housing. High output SMD LEDs. Fully sealed (IP67). Resistant to water, dust shock & vibrations. Stainless steel swivel bracket. Prewired to 250mm lead.
TR
AILE
R LIG
HT
ST
RA
ILER
S
70 mm
70mm
130mm
100mm
37.5 mm
42 mm
8 mm
37.5mm
124m
m
105mm
162m
m
134m
m
54mm
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
200 Lumens
600 Lumens
38
TR
AIL
ER
LIG
HT
S
Licence Plate Lamp
Clearance & Interior Lamp
Rear Combination Lamp
PART NO: PACK TyPE: LENS TyPE:
TL984A BULK ACRYLIC
TL984B BLISTER ACRYLIC
Rear Combination LampLeft or right side, 5 functions, includes licence plate lamp.
TLR984A BULK ACRYLIC
TLR984P BULK POLYCARBONATE
Left Rear Combination Lamp4 Functions.
TLC984A BULK ACRYLIC
TLC984P BULK POLYCARBONATE
Right Rear Combination Lamp5 Functions, includes licence plate lamp.
PART NO: PACK TyPE:
TLL984 BULK
TLL984B BLISTER
Replacement Polycarbonate Lens Only
PART NO: PACK TyPE:
NPL75 BULK
NPL75B BLISTER
Licence Plate Lamp Fitted with 12V festoon. Complies to ADR.
PART NO: PACK TyPE:
CL70 BULK
Red / Amber Clearance LampComes with festoon globes.
PART NO: PACK TyPE:
SvL29 BULK
Swivel Interior LampRotates 180 degrees and 90 degrees vertical, 12V 10W halogen globe, with on/off switch.
100mm x 100mm. Stop/tail, indicator & built-in reflex reflector. Quick assembly. Comes with fitted 12V bayonet globes. Wire connectors. Mounting screws and nuts. Complies to ADR.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
39
Submersible Trailer Lamps
PART NO: PACK TyPE:
ASS99B BLISTER
Submersible Trailer Lamp - Set of 2
ASSC99 BULK
Submersible Trailer LampPrewired with 230mm length wires and includes 7 heat shrink joiners
ASL99L BULK
Spare Inner Acrylic Left LensSuits submersible lamp
ASL99R BULK
Spare Inner Acrylic Right LensSuits submersible lamp
ASC99 BULK
Spare Impact Resistant Outer Clear CoverSuits submersible lamp
ASO99 BULK
Spare EPDM O-ring SealSuits submersible lamp
Magnetic Tow Lamps
PART NO: PACK TyPE:
MLK984 DISPLAY
Magnetic Tow Lamp Kit2 Combination lamps with powerful magnets connected with 8m cable & 7 Pin flat plug in heavy duty carry case. Lamps tilt up to 90 degree angle, ideal for use on towed vehicles, galvanised mounting brackets supplied. Lamps comply to ADR.
100% waterproof. High impact resistance. 5 Combined functions: stop/tail, indicator, licence plate and in-built reflex reflector fitted with 12V bayonet globes. Wire connectors and flexible licence plate holder. Complies to ADR.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
R LIG
HT
ST
RA
ILER
S
40
Australia’s onlytelescopic trailer board
• LED lights, number plate light & fastening straps• Built-in number plate holder• 8 extension lengths from 0.85m to 1.85m• 8 metres of cable• Interchangeable trailer plug adaptor with 3 main trailer plugs
TO WATCH THE VIDEO:Download a QR Code app’ on your SmartPhone or iPad and scan this code
PART NO: PACK TyPE:
TTB185 BULK
Telescopic Trailer BoardAdjusts from 850 - 1850, complete with LED including a licence plate lamp, a licence plate holder and 8M of cable moulded to a universal socket and 7 pin flat, small & large round interchangeable plugs.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
ST
RA
ILE
R L
IGH
T B
OA
RD
S
41
Trailer Boards with Interchangeable Plugs
PART NO: PACK TyPE: LENGTH:
TB153 BULK 1.5M
TB1853 BULK 1.85M
Incandescent Trailer Board8M of cable moulded to universal socket.
PART NO: PACK TyPE: LENGTH:
TB153L BULK 1.5M
TB1853L BULK 1.85M
LED Trailer Board8M of cable moulded to universal socket.
The new range of innovative Trailer Light Boards is available in either Incandescent or LED lamps and complete with 8M of cable moulded to a universal socket. Comes with 7 pin flat, small & large round interchangeable plugs.With a simple click, the Trailer Light Board is ready for use. This innovative solution will help retailers reduce the space required to display trailer boards in-store by up to 66%.
TR
AILE
R LIG
HT
BO
AR
DS
Includes 3 trailer plugs
Includes 3 trailer plugs
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
42
TR
AIL
ER
RE
FLE
CTO
RS Reflex Reflectors
PART NO: PACK TyPE:
RR2285 BULK
RR2285B BLISTER - SET OF 2
Red Reflex Reflector
PART NO: PACK TyPE:
AR2285 BULK
AR2285B BLISTER - SET OF 2
Amber Reflex Reflector
PART NO: PACK TyPE:
CR2285 BULK
CR2285B BLISTER - SET OF 2
Clear Reflex Reflector
PART NO: PACK TyPE:
RAR2285B BLISTER
Red & Amber Reflex ReflectorSet of 4 - 2 x amber & 2 x red.
PART NO: PACK TyPE:
RR4373 BULK
RR4373B BLISTER - SET OF 2
Red Reflex Reflector
PART NO: PACK TyPE:
AR4373 BULK
AR4373B BLISTER - SET OF 2
Amber Reflex Reflector
PART NO: PACK TyPE:
CR4373 BULK
CR4373B BLISTER - SET OF 2
Clear Reflex Reflector
22 x 85mm self adhesive. Complies to ADR.
43 x 73mm. Self adhesive and screw on base. Complies to ADR
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
43
CA
BLE
S &
AC
CE
SS
OR
IES
Electrical Trailer Cables
PART NO: PACK TyPE:
55B BLISTER
Trailer Cable5 core x 5 metres electrical trailer cable.
PART NO: PACK TyPE:
710B BLISTER
Trailer Cable7 core x 10 metres electrical trailer cable
PART NO: PACK TyPE:
FC125 BULK
Flat Cable7 core x 1.25 metres flat electrical trailer cable, packed in poly bag.
FC7B BLISTER
Flat Cable7 core x 1.5 metres flat electrical trailer cable, in blister pack.
55TB BLISTER
LED Lamp Cable5 core x 5m, tinned wires, suitable for trailers up to 3.5m
510TB BLISTER
LED Lamp Cable5 core x 10m, tinned wires, suitable for trailers up to 8m
Single Core Electrical Cables
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
12603B 15.0 4MM 26/0.30 30M BLACK
12603/100B 15.0 4MM 26/0.30 100M BLACK
12603R 15.0 4MM 26/0.30 30M RED
12603/100R 15.0 4MM 26/0.30 100M RED
12603Y 15.0 4MM 26/0.30 30M YELLOW
12603/100Y 15.0 4MM 26/0.30 100M YELLOW
12603N 15.0 4MM 26/0.30 30M BROWN
12603L 15.0 4MM 26/0.30 30M BLUE
12603/100L 15.0 4MM 26/0.30 100M BLUE
12603G 15.0 4MM 26/0.30 30M GREEN
12603/100G 15.0 4MM 26/0.30 100M GREEN
12603W 15.0 4MM 26/0.30 30M WHITE
12603/100W 15.0 4MM 26/0.30 100M WHITE
Single Core4.0mm x 26 strand electrical cable, available in various colours, 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
12603D 15.0 4MM 26/0.30 30M BLACK
Single CoreDouble insulated 4mm x 26 strand electrical cable, available in 30 metre reels.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
44
Single Core Electrical Cables
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
16503D 38 6MM 65/0.30 100M BLACK
Single CoreDouble insulated 6.0mm x 65 strand electrical cable, available in 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
16503B 38 6MM 65/0.30 30M BLACK
16503/100B 38 6MM 65/0.30 100M BLACK
16503R 38 6MM 65/0.30 30M RED
16503/100R 38 6MM 65/0.30 100M RED
16503N 38 6MM 65/0.30 30M BROWN
16503G 38 6MM 65/0.30 30M GREEN
16503Y 38 6MM 65/0.30 30M YELLOW
16503L 38 6MM 65/0.30 30M BLUE
16503/100L 38 6MM 65/0.30 100M BLUE
16503W 38 6MM 65/0.30 30M WHITE
16503/100W 38 6MM 65/0.30 100M WHITE
Single Core6.0mm x 65 strand electrical cable, available in various colours, 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
11603/30B 10.0 3MM 16/0.30 30M BLACK
11603B 10.0 3MM 16/0.30 100M BLACK
11603/30R 10.0 3MM 16/0.30 30M RED
11603R 10.0 3MM 16/0.30 100M RED
11603/30N 10.0 3MM 16/0.30 30M BROWN
11603N 10.0 3MM 16/0.30 100M BROWN
11603/30G 10.0 3MM 16/0.30 30M GREEN
11603G 10.0 3MM 16/0.30 100M GREEN
11603/30L 10.0 3MM 16/0.30 30M BLUE
11603L 10.0 3MM 16/0.30 100M BLUE
11603/30Y 10.0 3MM 16/0.30 30M YELLOW
11603Y 10.0 3MM 16/0.30 100M YELLOW
11603/30W 10.0 3MM 16/0.30 30M WHITE
11603W 10.0 3MM 16/0.30 100M WHITE
Single Core 3.0mm x 16 strand electrical cable, available in various colours, 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
17032B 4.0 2MM 7/0.32 1000M BLACK
17032/100B 4.0 2MM 7/0.32 100M BLACK
17032R 4.0 2MM 7/0.32 1000M RED
17032/100N 4.0 2MM 7/0.32 100M BROWN
17032/100W 4.0 2MM 7/0.32 100M WHITE
Single Core2.0mm x 7 strand electrical cable, available in various colours, 100 and 1000 metre reels.
CA
BLE
S &
AC
CE
SS
OR
IES
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
45
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
22603S/30 15.0 4MM 26/0.30 30M BLACK
22603S/100 15.0 4MM 26/0.30 100M BLACK
(SHEATHED)
22603F/30 15.0 4MM 26/0.30 30M RED & BLACK
22603F 15.0 4MM 26/0.30 100M RED & BLACK
(FIGURE 8)
2 Core4.0mm x 26 strand electrical cable, available in 30 & 100 metre reels.
Single Core Electrical Cables
2 Core Electrical Cables
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
14103/30B 25.0 5MM 41/0.30 30M BLACK
14103B 25.0 5MM 41/0.30 100M BLACK
14103/30R 25.0 5MM 41/0.30 30M RED
14103R 25.0 5MM 41/0.30 100M RED
14103/30L 25.0 5MM 41/0.30 30M BLUE
14103L 25.0 5MM 41/0.30 100M BLUE
14103N 25.0 5MM 41/0.30 100M BROWN
14103/30Y 25.0 5MM 41/0.30 30M YELLOW
14103W 25.0 5MM 41/0.30 100M WHITE
Single Core5.0mm x 41 strand electrical cable, available in various colours, 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
27032 4.0 2MM 7/0.32 100M BLACK
Twin Core (figure 8)2.0mm x 7 strand electrical cable, available in black & white, 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
21603S/30 10.0 3MM 16/0.30 30M BLACK
21603S 10.0 3MM 16/0.30 100M BLACK
(SHEATHED)
21603F/30 10.0 3MM 16/0.30 30M RED & BLACK
21603F 10.0 3MM 16/0.30 100M RED & BLACK
(FIGURE 8)
2 Core3.0mm x 16 strand electrical cable, available in 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
24103S 27.0 5MM 41/0.30 30M BLACK
24103S/50 27.0 5MM 41/0.30 50M BLACK
2 Core5.0mm x 41 strand sheathed electrical cable, available in 30 and 50 metre reels.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
CA
BLE
S &
AC
CE
SS
OR
IES
TR
AILE
RS
46
4 Core Electrical Cables
5 Core Electrical Cables
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
47032/100 4.0 2MM 7/0.32 100M BLACK
47032/500 4.0 2MM 7/0.32 500M BLACK
4 Core2.0mm x 7 strand electrical cable, available in 100 and 500 metre reels
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
57032/30 4.0 2MM 7/0.32 30M BLACK
57032/100 4.0 2MM 7/0.32 100M BLACK
57032/500 4.0 2MM 7/0.32 500M BLACK
5 Core2.0mm x 7 strand electrical cable, available in 30, 100 and 500 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
5903/30 6 2.5MM 9/0.30 30M BLACK
5903/100 6 2.5MM 9/0.30 100M BLACK
5 Core2.5mm x 9 strand electrical cable, available in 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
52603/30 15.0 4MM 26/0.30 30M BLACK
52603/100 15.0 4MM 26/0.30 100M BLACK
5 Core4.0mm x 26 strand electrical cable, available in 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
51603/30 10.0 3MM 16/0.30 30M BLACK
51603/100 10.0 3MM 16/0.30 100M BLACK
5 Core3.0mm x 16 strand electrical cable, available in 30 and 100 metre reels.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
CA
BLE
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
47
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
77032/30 4.0 2MM 7/0.32 30M BLACK
77032/100 4.0 2MM 7/0.32 100M BLACK
77032/500 4.0 2MM 7/0.32 500M BLACK
7 Core2.0mm x 7 strand electrical cable, available in 30, 100 and 500 metre reels.
7 Core Electrical Cables
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
7903/30 6 2.5MM 9/0.30 30M BLACK
7903/100 6 2.5MM 9/0.30 100M BLACK
7 Core2.5mm x 9 strand electrical cable, available in 30 and 100 metre reels.
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
71603/30 10.0 3MM 16/0.30 30M BLACK
71603/100 10.0 3MM 16/0.30 100M BLACK
7 Core3.0mm x 16 strand electrical cable, available in 30 and 100 metre reels
PART NO: AMP RATING: SIZE: STRAND: LENGTH: COLOUR:
72603/30 15.0 4MM 26/0.30 30M BLACK
72603/100 15.0 4MM 26/0.30 100M BLACK
7 Core4.0mm x 26 strand electrical cable, available in 30 and 100 metre reels.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
CA
BLE
S &
AC
CE
SS
OR
IES
TR
AILE
RS
48
PART NO: PACK TyPE:
56178 BULK
Ring TerminalRing diameter 5mm, suitable for 4mm wire.
PART NO: PACK TyPE:
56180 BULK
Ring TerminalRing diameter 6.3mm, suitable for 4mm wire.
PART NO: PACK TyPE:
56190 BULK
Ring TerminalRing diameter 8.4mm, suitable for 5mm wire.
PART NO: PACK TyPE:
56172 BULK
Ring TerminalRing diameter 5mm, suitable for 2.5 to 3mm wire.
PART NO: PACK TyPE:
56174 BULK
Ring TerminalRing diameter 6.3mm, suitable for 2.5 to 3mm wire.
PART NO: PACK TyPE:
56150 BULK
Female Bullet ConnectorsSuitable for 2.5 to 3mm wire
PART NO: PACK TyPE:
56156 BULK
Cable JoinerSuitable for 4mm wire
PART NO: PACK TyPE:
56152 BULK
Female Bullet ConnectorsSuitable for 4mm wire.
PART NO: PACK TyPE:
56120 BULK
Male Blade Terminal ConnectorsSuitable for 2.5 to 3.0mm wire.
PART NO: PACK TyPE:
56134 BULK
Female Blade Terminal ConnectorsSuitable for 2.5 to 3.0mm wire.
PART NO: PACK TyPE:
56144 BULK
Female Blade Terminal ConnectorsFully insulated, suitable for 4mm wire.
PART NO: PACK TyPE:
56146 BULK
Male Bullet ConnectorsSuitable for 2.5 to 3mm wire.
PART NO: PACK TyPE:
56122 BULK
Male Blade Terminal ConnectorsSuitable for 4mm wire.
PART NO: PACK TyPE:
56136 BULK
Female Blade Terminal ConnectorsSuitable for 4mm wire.
PART NO: PACK TyPE:
56148 BULK
Male Bullet ConnectorsSuitable for 4mm wire.
PART NO: PACK TyPE:
WPC25 BULK
WPC25B BLISTER
Heat shrink JoinerSuitable for 2.5 to 3.0mm wire. 10 in blister pack.
Terminals and Connectors
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
CA
BLE
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
49
TR
AILE
RS
CA
BLE
S &
AC
CE
SS
OR
IES
PART NO: PACK TyPE:
ET18 BULK
Black PvC Electrical Insulating Tape 18mm x 20m
PART NO: PACK TyPE:
C250 BULK
B250 BLISTER
2.5mm Wire Clips. 12 in blister pack
PART NO: PACK TyPE:
100 - 2.5/W BULK
100mm x 2.5mm Black Cable Tie
PART NO: PACK TyPE:
150 - 3.5/W BULK
150mm x 3.5mm Black Cable Tie
PART NO: PACK TyPE:
200 - 4.7/W BULK
200mm x 4.7mm Black Cable Tie
PART NO: PACK TyPE:
300 - 4.6/W BULK
300mm x 4.6mm Black Cable Tie
PART NO: PACK TyPE:
380 - 4.7/W BULK
380mm x 4.7mm Black Cable Tie
Cable Ties
Electrical Tape Wire Clips
Light Globes
PART NO: PACK TyPE:
47380 BULK
47380B BLISTER - SET OF 2
Stop/tail Bayonet Globe, 12v 21/5W
PART NO: PACK TyPE:
47254 BULK
Festoon Globe, 12v 5W
PART NO: PACK TyPE:
47382 BULK
47382B BLISTER - SET OF 2
Indicator Bayonet Globe, 12v 21W
PART NO: PACK TyPE:
47263 BULK
Festoon Globe, 12v 3W
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
50
JOC
KE
Y W
HE
ELS
Heavy duty. 10” Solid rubber wheel. 250mm extension. 350kg load capacity. Capable of manoeuvring up to 2 tonne caravan, horse float or trailer on an even surface with minimum effort.
PART NO: PACK TyPE:
RJW1C DISPLAY CARTON
Ezimover Clamp On Jockey Wheel
PART NO: PACK TyPE:
RJW1SU DISPLAY CARTON
Ezimover Swing Up Jockey Wheel
Dual wheel for extra traction& weight distribution
Dual wheel for extra traction& weight distribution
Easy to operateEasy to operate
Easily operated by rotating the knobs
4 Functions:Forward, reverse,neutral & stop/lock
Easily operated by rotating the knobs
4 Functions:Forward, reverse,neutral & stop/lock
PART NO: PACK TyPE:
RJW2C DISPLAY CARTON
Ezimover Jockey Wheel
Heavy duty: 500kg load capacity. Dual wheel for extra traction. 10” Solid rubber wheels. Clamp on. Capable of manoeuvring up to 2 tonne caravan, horse float or trailer on an even surface with minimum effort.
Dual wheel for extra traction& weight distribution
Dual wheel for extra traction& weight distribution
Easy to operateEasy to operate
with the Ark Ezimover Ratchet Jockey Wheel
Give your back a break!
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
51
JOC
KE
Y W
HE
ELS
Premium Jockey Wheels
Australian & USA patent and registered design applied for
Fold away handle
Powder coated sunraysia pattern steel rim
Available in 3 sizes and 3 attachment options: (see page 52)
10” Wheel with a U-bolt swivel clamp
6” Wheel with a bolt/weld fixed clamp
8” Wheel with a bolt/weld swivel clamp
Handle designed to swivelwith minimum effort
Easy tilt Quality zinc plating
Sealed ball bearings
Low profile solid rubber tyre
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
52
PART NO: PACK TyPE: CLAMP TyPE:
JWP10 BULK NO CLAMP
JWP10C BULK BOLT/WELD FIxED
JWP10S BULK BOLT/WELD SWIvEL
JWP10SU BULK U-BOLT SWIvEL
10” Premium Jockey Wheel
PART NO: PACK TyPE: CLAMP TyPE:
JWP6 BULK NO CLAMP
JWP6C BULK BOLT/WELD FIxED
JWP6S BULK BOLT/WELD SWIvEL
JWP6SU BULK U-BOLT SWIvEL
6” Premium Jockey Wheel
PART NO: PACK TyPE: CLAMP TyPE:
JWP8 BULK NO CLAMP
JWP8C BULK BOLT/WELD FIxED
JWP8S BULK BOLT/WELD SWIvEL
JWP8SU BULK U-BOLT SWIvEL
8” Premium Jockey Wheel
JWP
6JW
P8
JWP
10
JWP
6SU
JWP
8SU
JWP
10S
U
JWP
6SJW
P8S
JWP
10S
JWP
6CJW
P8C
JWP
10C
Premium Jockey Wheels
For those who want the smoothest running, longest lasting, highest quality and best looking jockey wheel on the market - with a white sunraysia style rim to match the wheels on your rig. Suitable for all on-road, off-road and marine uses.
Features:
• Quality zinc plating • Sealed bearings • 250mm max’ height extension • Easy-tilt swivel system clamp handle
• Solid rubber tyres • Rated up to 350kg • Fold-away winding handle • Sunraysia powder coated steel rims
JOC
KE
Y W
HE
ELS
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
53
PART NO: PACK TyPE:
JWBN6 BULK
Boat Wheel Assembly150mm (6”) standard wheel and bracket.Non-extendable. 350kg load capacity
PART NO: PACK TyPE: CLAMP TyPE:
JWN6 BULK NO CLAMP
JWN6C BULK BOLT/WELD FIxED
JWN6S BULK BOLT/WELD SWIvEL
JWN6SU BULK U-BOLT SWIvEL
6” Standard Jockey WheelSolid rubber wheel.
PART NO: PACK TyPE: CLAMP TyPE:
JWN8 BULK NO CLAMP
JWN8C BULK BOLT/WELD FIxED
JWN8S BULK BOLT/WELD SWIvEL
JWN8SU BULK U-BOLT SWIvEL
8” Standard Jockey WheelSolid rubber wheel with steel rim.
PART NO: PACK TyPE: CLAMP TyPE:
JWN10 BULK NO CLAMP
JWN10C BULK BOLT/WELD FIxED
JWN10S BULK BOLT/WELD SWIvEL
JWN10SU BULK U-BOLT SWIvEL
10” Standard Jockey WheelSolid rubber wheel with steel rim.
JWN
6
JWN
8JW
N10
JWN
6CJW
N8C
JWN
10C
JWN
6SJW
N8S
JWN
10S
JWN
6SU
JWN
8SU
JWN
10S
U
Standard Jockey wheels JOC
KE
Y W
HE
ELS
TR
AILE
RS
A quality jockey wheel at an affordable price, the standard range are probably Australia’s best known and best value jockey wheels – all with zinc finish and a solid rubber wheel. They’re ideal for boat trailers, box trailers, horse trailers and lighter camper trailers. They are also the jockey wheel of choice by most trailer manufacturers.
Features:
• Quality zinc plating • Replaceable winding handle • 250mm max’ height extension
• Solid rubber tyres • Rated up to 350kg
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
54
JOC
KE
Y W
HE
ELS
TR
AIL
ER
S
Economy Jockey Wheels
PART NO: PACK TyPE: CLAMP TyPE:
JWB6 BULK NO CLAMP
JWB6C BULK BOLT/WELD FIxED
JWB6S BULK BOLT/WELD SWIvEL
JWB6SU BULK U-BOLT SWIvEL
6” Economy Jockey Wheel
PART NO: PACK TyPE: CLAMP TyPE:
JWB8 BULK NO CLAMP
JWB8C BULK BOLT/WELD FIxED
JWB8S BULK BOLT/WELD SWIvEL
JWB8SU BULK U-BOLT SWIvEL
8” Economy Jockey Wheel
PART NO: PACK TyPE: CLAMP TyPE:
JWB10 BULK NO CLAMP
JWB10C BULK BOLT/WELD FIxED
JWB10S BULK BOLT/WELD SWIvEL
JWB10SU BULK U-BOLT SWIvEL
10” Economy Jockey Wheel
JWB
6C
JWB
8CJW
B10
C
JWB
6SJW
B8S
JWB
10S
JWB
6SU
JWB
8SU
JWB
10S
U
JWB
6JW
B8
JWB
10
A basic jockey wheel for the budget conscious – suitable for box trailers, tinnie boat trailers and lighter vehicles weighing under 750kg.
Features:
• Polypropylene wheel • 250mm max’ height extension
• Zinc Finish • Rated up to 350kg
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
55
Heavy Duty Jockey Wheels
Pneumatic Jockey Wheels
PART NO: PACK TyPE: CLAMP TyPE:
JWN10P BULK NO CLAMP
JWN10CP BULK BOLT/WELD FIxED
JWN10SP BULK BOLT/WELD SWIvEL
JWN10SUP BULK U-BOLT SWIvEL
10” Pneumatic Jockey Wheels250mm extension.
PART NO: PACK TyPE: CLAMP TyPE:
JW8CHD BULK BOLT/WELD FIxED
JW8SHD BULK BOLT/WELD SWIvEL
JW8SUHD BULK U-BOLT SWIvEL
Heavy Duty Jockey Wheels8” Steel rim, solid rubber wheel.
PART NO: PACK TyPE: CLAMP TyPE:
JW10CHD BULK BOLT/WELD FIxED
JW10SHD BULK BOLT/WELD SWIvEL
JW10SUHD BULK U-BOLT SWIvEL
Heavy Duty Jockey Wheels10” Steel rim, solid rubber wheel
JWN
10P
JWN
10C
P
JWN
10S
P
JWN
10S
UP
JW8C
HD
JW10
CH
D
JW8S
HD
JW10
SH
D
JW8S
UH
DJW
10S
UH
D
A serious jockey wheel for people who are serious about going offroad - offering superior Dacromat protection and a 500kg rating. These jockey wheels will cope with whatever you throw at them and are suitable for all on-road, off-road and marine applications.
Features:• High 500kg load capacity • Steel rim & solid rubber wheel
• Superior rust resistant dacromat finish • 250mm max’ height extension
Designed for those launching and manoeuvring on sand and other similar soft ground. All four feature a large 10 inch inflatable heavy-tread rubber wheel to cope with those difficult ground conditions.
Features:
• 250mm max’ height extension • Large 10” inflatable heavy-tread wheel
• Quality zinc finish
JOC
KE
Y W
HE
ELS
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
56
Jockey Stands
Corner Steadies
PART NO: PACK TyPE:
JS35SU BULK
Jockey StandSide winder, with locking swivel U-bolt bracket.
PART NO: PACK TyPE: CLAMP TyPE:
JSN35 BULK NO CLAMP
JSN35C BULK BOLT/WELD FIxED
JSN35S BULK BOLT/WELD SWIvEL
JSN35SU BULK U-BOLT SWIvEL
Jockey Stands
PART NO: LENGTH: PACK TyPE:
DDS600 600mm BULK
DDS750 750mm BULK
Drop Down Corner SteadyLatest design with locking swivel bracket and large grip handle for comfortable and easy swivelling. Also features a large flat load bearing foot ideal for soft ground. Large foot locks away and silencer pads reduce noise caused by vibration.Hex drive and zinc finish.
PART NO: LENGTH: PACK TyPE:
CS500 500mm BULK
CS700 700mm BULK
Standard Corner SteadyHex drive wind down style
PART NO: LENGTH: PACK TyPE:
CSH55 550mm BULK
CSH90 900mm BULK
3/4” Hex Drive Winding HandleTo suit corner steadies
JSN
35S
U
JSN
35C
JSN
35S
JSN
35
Note: Corner steadies are not designed to lift the trailer or caravan off the ground. They are designed to stabilise the trailer or caravan when stationary.
350kg load capacity - extension 250mm.
JOC
KE
Y S
TAN
DS
& C
OR
NE
R S
TE
AD
IES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
57
PART NO: PACK TyPE:
PW10 BULK
250mm (10”) Pneumatic Rubber WheelSteel rim. 16mm shaft size.
PART NO: PACK TyPE:
SW10B BULK
10” Jockey Wheel Bearing Replacement
PART NO: PACK TyPE:
SW10S BULK
10” Jockey Wheel Shaft Replacement
JOC
KE
Y W
HE
EL A
CC
ES
SO
RIE
S
Replacement Jockey Wheels
PART NO: PACK TyPE:
SW8 BULK
200mm (8”) Solid Rubber WheelSteel rim. 22mm shaft size.
PART NO: WHEEL SIZE: PACK TyPE:
PSW6 150mm - 6” BULK
PSW8 200mm - 8” BULK
PSW10 250mm - 10” BULK
Powder-coated Solid Rubber Wheel12mm shaft size. Steel rim.
PART NO: PACK TyPE:
SW10 BULK
250mm (10”) Solid Rubber WheelSteel rim. 16mm shaft size.
PART NO: WHEEL SIZE: PACK TyPE:
ESW6 150mm - 6” BULK
ESW8 200mm - 8” BULK
ESW10 250mm - 10” BULK
Black Polypropylene Wheel12mm shaft size.
PART NO: PACK TyPE:
NW6 BULK
NW6B BLISTER
150mm (6”) Nylon Wheel12mm shaft size.
PART NO: PACK TyPE:
IN10 BULK
IN10B BLISTER
Inner TubeSuits 250mm (10”) pneumatic wheel
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
58
PART NO: PACK TyPE:
FCL50 DISPLAY
Fixed ClampWith 2 holes bolt-on or weld-on, suits 350kg jockey wheels
PART NO: PACK TyPE:
FCL8 BULK
Fixed ClampWith 8 holes for U-bolts, suits 350kg jockey wheels.
PART NO: PACK TyPE:
SCL2 BULK
Swivel ClampWith 2 holes, suits 350kg jockey wheels
PART NO: PACK TyPE:
FCL2HD BULK
Heavy Duty ClampWith 2 holes, bolt-on or weld-on, suits 500kg jockey wheels
PART NO: PACK TyPE:
SCL8 BULK
Swivel ClampWith 8 holes suits 350kg jockey wheels
Jockey Wheel Accessories
50mm
13mmø
75mm10
0mm
190mm
50mm
13mmø
75mm10
0mm
185mm
143mm
13mm
143mm
13mm
190mm
13mm
4mm
JOC
KE
Y W
HE
EL
AC
CE
SS
OR
IES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
59
PART NO: PACK TyPE:
HDL50B BLISTER
Jockey Wheel HandleSuits standard jockey wheels.
PART NO: PACK TyPE: FINISH:
UB2 BULK zINC
UB2B BLISTER zINC
UB2G BULK GALvANISED
2” x 2” U-bolts, with nuts and spring washers. 50mm x 50mm. Set of 2.
PART NO: PACK TyPE: FINISH:
UB3 BULK zINC
UB3B BLISTER zINC
UB3G BULK GALvANISED
3” x 2” U-bolts, with nuts and spring washers. 75mm x 50mm. Set of 2.
PART NO: PACK TyPE: FINISH:
UB4 BULK zINC
UB4B BLISTER zINC
UB4G BULK GALvANISED
4” x 2” U-bolts, with nuts and spring washers. 100mm x 50mm. Set of 2.
PART NO: PACK TyPE: FINISH:
UB32B BLISTER zINC
3” x 1 3/8” U-bolts, with nuts and spring washers. 75mm x 35mm. Set of 2.
PART NO: PACK TyPE: FINISH:
UB33 BULK zINC
UB33B BLISTER zINC
3” x 3” U-bolts, with nuts and spring washers. 75mm x 75mm. Set of 2.
PART NO: PACK TyPE:
HDL57 BULK
Heavy Duty HandleSuits 500kg jockey wheels
PART NO: PACK TyPE:
JWPH BULK
Premium Jockey Wheel Swivel Handle Replacement
Jockey Wheel Accessories
Jockey Wheel U-bolts
50mm 12mm
45mm
75m
m
75mm 12mm
45mm
75m
m
100mm 12mm
45mm
75m
m
75mm 12mm
25mm
60m
m
75mm 12mm
45mm
100m
m
JOC
KE
Y W
HE
EL A
CC
ES
SO
RIE
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
60
Don’t be fooled by its size, the Compact Wheel Clamp will deter even the most persistent thief. The unique slimline design incorporates a bright, lightweight and heavy duty frame with a flush mounted locking handle. Simple & easy to use, the unit clamps to your wheel and secures over a stud nut. The Compact Wheel Clamp stores easily in its carry bag and comes complete with two keys and two wheel nut adaptors. Suitable for most cars, caravans & trailers, the Compact Wheel Clamp fits 13” to 16” rim sizes with standard tyre profile and can adjust from 100mm - 240mm tyre widths.
Protect your investment
PART NO: PACK TyPE:
CWC300D DISPLAY
Compact Wheel ClampSuits 13” and 16” rim sizes with standard tyre profile and can adjust from 100mm - 240mm tyre widths. Carry bag, wheel nut adaptors & 2 keys included. Suitable for cars, trailers and caravans. Heavy duty, light weight and easy to use.
SE
CU
RIT
Y L
OC
KS
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
61
SE
CU
RIT
Y LO
CK
S
PART NO: PACK TyPE:
ATL155 BLISTER
Trailer and Tow Bar LocksSeparate trailer and hitch pin locks. Heavy duty trailer lock has double locking system. Secures trailer when attached to vehicle and when unattached. Hitch Pin Lock prevents tow bar hitch from theft. One key fits both locks. Chrome plated finish. (Hitch Pin Lock: Towing rating 3500kg)
PART NO: PACK TyPE:
ATL15 BLISTER
Trailer LockHeavy duty in-built double locking mechanism. Secures trailer when attached to vehicle and when unattached. Chrome plated finish.
PART NO: PACK TyPE:
CPL10 DISPLAY
Trailer Coupling LockHeavy duty 2 position locking system. Secures trailer when attached to vehicle and when unattached. Includes padlock.
Coupling Security Locks
Wheel Lock
SEcURE YOUR TRAILER SEcURE YOUR ATV PART NO: PACK TyPE:
WLJ300D DISPLAY
Wheel LockA must for securing your ATV or trailer anywhere, hardened steel resists cutting, ratchet adjusts to most wheel sizes, rubber coated arms to protect wheel finishes, key lanyard included, anti-pick lock, includes 3 keys - 1 with LED light, fits tyres from 140mm to 295mm.
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
62
Wind in, withoutgetting wound up
with our new range of trailer boat winches
All Your Trailer Needs
www.arkcorp.com.au
Comfortable softgrip handle
Release lever
3 Gear speeds(12:1, 5:1 & 1:1)
Solid-plate gears
1150kg model
650kg
900kg
275kg (Webbing)
275kg (Cable)
Launch controlbraking system
Launching and retrieving your boat has never been easier and less stressful with our new range of winches. Designed by Ark in Australia, each one is made from high quality durable materials that greatly reduce the impact saltwater has on all components of your winch. Plus the 900kg & 1150kg winches also feature our unique patented magnetic snap-on handle – so it’ll never fall off until you choose to remove it !
UV Resistantwebbing
Forged steel hook
New ConceptPatented magnetic snap-on handle
BO
AT
WIN
CH
ES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
63
PART NO: PACK TyPE:
W115125W DISPLAY
12:1 / 5:1 / 1:1 - 1150kgLaunching control brake system. UV coated polyester webbing, forged steel snap on hook, soft handle grip. 65mm x 7.5m webbing.
PART NO: PACK TYPE:
W905W DISPLAY
5:1 / 1:1 - 900kgLaunching control brake system. UV coated polyester webbing, forged steel snap on hook, soft handle grip. 50mm x 7.5m webbing.
PART NO: PACK TyPE:
W654W DISPLAY
4:1 - 650kg UV coated polyester webbing, forged steel snap on hook. 50mm x 6m webbing.
PART NO: PACK TyPE:
W273C DISPLAY
3:1 - 275kgGalvanised steel cable, multi fit base, stainless steel S hook. 4mm x 6m cable.
PART NO: PACK TyPE:
W273W DISPLAY
3:1 - 275kgUV coated polyester webbing, stainless steel S hook. 50mm x 4.5m webbing.
PART NO: PACK TyPE:
WH210B BLISTER
Boat Winch HandleSnap-on handle. Ideal when changing gears. Rust resistant. Soft handle grip. Suitable for Ark winch models: W905W & W115125W
Rust resistant. Stainless steel springs & bushes. Solid plate gears. Multi-fit base.
Boat Winches BO
AT
WIN
CH
ES
T
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
64
BO
AT
AC
CE
SS
OR
IES
PART NO: PACK TyPE:
SPW6B BLISTER
Boat Roller Washers & Split PinsRust proof. 6 x stainless steel washers. 6 x stainless steel split pins. Suits 16mm to 18mm spindle.
PART NO: PACK TyPE:
SF56B BLISTER
Trailer Winch StrapHeavy duty. Breaking strain 1870kg. Forge steel snap hook. UV & chemical resistance. Width 50mm x 6m length
PART NO: PACK TyPE:
SF6575B BLISTER
Trailer Winch StrapHeavy duty. Breaking strain 2350kg. Forge steel snap hook. UV & chemical resistance. Width 65mm x 7.5m length
PART NO: PACK TyPE:
SS545B BLISTER
Trailer Winch StrapHeavy duty. Breaking strain 1870kg. Stainless steel S hook. UV & chemical resistance. Width 50mm x 4.5m length
PART NO: PACK TyPE:
DRS46B BLISTER
Dyneema RopeHeavy duty. Breaking strain 1300kg. Stainless steel S hook. Suitable for boat winches. Diameter 4mm x 6m length.
PART NO: PACK TyPE:
DRF675B BLISTER
Dyneema RopeHeavy duty. Breaking strain 3500kg. Forge steel snap hook. Suitable for boat winches. Diameter 6mm x 7.5m length.
PART NO: PACK TyPE:
WPC100 BULK
Suits 100mm x 50mm winch post.
WPC75 BULK
Suits 75mm x 50mm winch post.
WPC50 BULK
Suits 50mm x 50mm winch post.
PART NO: PACK TyPE:
DRF56B BLISTER
Dyneema RopeHeavy duty. Breaking strain 2300kg. Forge steel snap hook. Suitable for boat winches. Diameter 5mm x 6m length.
Blue plastic winch post cap. Keeps dirt and water out of post. Also, covers unfinished sharp edges.
Boat Roller Washers & Split Pins
Winch Webbing & Rope
Winch Post Caps
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
65
PART NO: BEARING: PACK TyPE:
TRH32 SUITS HOLDEN DISPLAY
TRF35 SUITS FORD DISPLAY
Ark Trailer RescueEasy to mount, multiple mounting positions, galvanised finish. Hub and spare wheel not included
Don’t let seized bearings spoil your fun!
Ark’s Trailer Rescue kit will allow you to carry a complete hub or disc hub assembly along with your spare wheel for occasions which are more than just a flat tyre. The Trailer Rescue kit will suit most trailers, mounted to either your draw bar or winch post in various positions and will get you back on the road in no time! It’s a small investment for peace of mind.
Assembled with Hub/Disc hub & spare wheel
Unassembled1 3Assembled with Hub/Disc hub2
Trailer rescue kit
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
BO
AT
AC
CE
SS
OR
IES
TR
AILE
RS
66
Easy boat retrieval,whatever the weather!
BO
AT
AC
CE
SS
OR
IES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
SELF-ALIGNING BOAT LOADER
67
PART NO: PACK TyPE:
EG8 DISPLAY CARTON
Suits power boats - 3.6 to 4.2 (12 to 14ft) & sailboats - 4.2 to 4.8m (14 to 16ft)
PART NO: PACK TyPE:
EG10 DISPLAY CARTON
Suits power boats - 4.2 to 4.8m (14 to 16ft) & sailboats - 4.8 to 6.0m (16 to 20ft)
PART NO: PACK TyPE:
EG11 DISPLAY CARTON
Suits power boats - 4.8 to 6.0m (16 to 20ft) & sailboats - 6.0 to 8.5m (20 to 28ft)
PART NO: PACK TyPE:
EG13 DISPLAY CARTON
Suits power boats - 6.0 to 8.5m (20 to 28ft)
PART NO: PACK TyPE:
EG8 - SPR BULK
Replacement springs. Set of 2. Suits EG8
PART NO: PACK TyPE:
EG10 - SPR BULK
Replacement springs. Set of 2. Suits EG10
PART NO: PACK TyPE:
EG11 - SPR BULK
Replacement springs. Set of 2. Suits EG11
PART NO: PACK TyPE:
EG13 - SPR BULK
Replacement springs. Set of 2. Suits EG13.
PART NO: PACK TyPE:
EG - TR45 BULK
Top roller to suit EziGuide.
PART NO: PACK TyPE:
EG - LR45 BULK
Large roller to suit EziGuide.
The EzIGUIDE will simplify launching and boat retrieval by always guiding your boat safely onto the centre of your trailer. Models available to suit boat sizes from 3.6m (12ft) to 8.5m (28ft).
Ezi Guide
Ezi Guide Spare Parts
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
BO
AT
AC
CE
SS
OR
IES
TR
AILE
RS
68
Bow Shackles
Dee Shackles
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
PART NO: PACK TyPE:
DSG06B BLISTER
Dee Shackle6mm - galvanised
PART NO: PACK TyPE:
BSG20D DISPLAY
Bow Shackle20mm - galvanised, load rating 4750kg
PART NO: PACK TyPE:
DSG16B BLISTER
Dee Shackle16mm - galvanised
PART NO: PACK TyPE:
BSS06B BLISTER
Bow Shackle6mm - stainless steel
BSS08B BLISTER
Bow Shackle8mm - stainless steel
BSS10B BLISTER
Bow Shackle10mm - stainless steel
DSS06B BLISTER
Dee Shackle6mm - stainless steel
DSS08B BLISTER
Dee Shackle8mm - stainless steel
DSS10B BLISTER
Dee Shackle10mm - stainless steel
DSS12B BLISTER
Dee Shackle12mm - stainless steel
DSG08 BULK
DSG08B BLISTER
Dee Shackle8mm - galvanised
DSG10 BULK
DSG10B BLISTER
Dee Shackle10mm - galvanised
DSG12 BULK
DSG12B BLISTER
Dee Shackle12mm - galvanised
Rated Dee ShacklesPART NO: PACK TyPE:
DSGR08 BULK
DSGR08B BLISTER
Dee Shackle - Rated 750kg8mm (5/16”) - Galvanised 0.75T stamped
PART NO: PACK TyPE:
DSGR11 BULK
DSGR11B BLISTER
Dee Shackle - Rated 1500kg11mm (7/16”) - Galvanised 1.5T stamped
PART NO: PACK TyPE:
DSGR10 BULK
DSGR10B BLISTER
Dee Shackle - Rated 1000kg10mm (3/8”) - Galvanised 1T stamped
PART NO: PACK TyPE:
DSGR13 BULK
DSGR13B BLISTER
Dee Shackle - Rated 2000kg13mm (1/2”) - Galvanised 2T stamped
SH
AC
KLE
S
Complies to Australian standards AS2741-2002
TR
AIL
ER
S
69
50mm Trailer Couplings
PART NO: FINISH:
A632 PAINTED
1000kg Star Nut 50mm Coupling, built with tongue support spring and safety locking device, 2 hole standard.
PART NO: FINISH:
CAS22 PAINTED
CAS22z zINC PLATED
2000kg Quick Release 50mm Coupling, with adjustable screw, built with padlock facility, 2 hole standard. Complies to AS4177.3 - 2004.
PART NO: FINISH:
CAS32 PAINTED
CAS32z zINC PLATED
2000kg Quick Release 50mm Coupling, with adjustable screw, built with padlock facility, 3 hole standard. Complies to AS4177.3 - 2004.
PART NO: FINISH:
CAB22z zINC PLATED
2000kg RHS 50mm Coupling, zinc plated, with adjustable screw, tapped with 1/2” BSW thread, fits 50mm draw bar and built with padlock facility, 2 hole standard. Complies to AS4177.3 - 2004.
PART NO: FINISH:
A788 PAINTED
2000kg 50mm Coupling, with adjustable screw, and padlock facility. Complies to AS4177.3 - 2004.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
67mm
13mmØ
102mm
14mmØ
110mm
51mm
14mmØ
62mm
1/2” BSW Thread Ø
TR
AILE
R C
OU
PLIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
70
50mm Electric Trailer Coupling
70mm Trailer Coupling
Trailer Coupling Guard
PART NO: FINISH:
EC35z zINC PLATED
3500kg Electric 50mm coupling, with adjustable screw, padlock facility & parkbrake. Complies to AS4177.3 - 2004.
PART NO: FINISH:
C4570 PAINTED
70mm 6 tonne fixed ball coupling, with park brake. ADR approved.
PART NO: FINISH:
CG50B BLISTER
Trailer Coupling GuardFits most 50mm couplings
Protects your vehicle from minor dents and scrapes when hitching and unhitching your trailer
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
CO
UP
LIN
GS
& A
CC
ES
SO
RIE
S Overide Coupling
PART NO: FINISH:
ORC50 PAINTED
ORC50G GALvANISED
ORC50z zINC PLATED
2000kg Mechanical over-ride 50mm Coupling fitted with reversing lock and padlock facility. Complies to AS4177.3 - 2004.
14m
mØ55mm
184m
m
14m
mØ55mm
184m
m
16m
mØ55mm
184m
m
TR
AIL
ER
S
71
Trailer Coupling Parts & Accessories
PART NO: FINISH:
MBP50 PAINTED
MBP50G GALvANISED
MBP50z zINC PLATED
Mechanical Base PlateBrake arm to suit ORC50 over-ride coupling.
PART NO: FINISH:
HBR50 PAINTED
HBR50G GALvANISED
HBR50z zINC PLATED
Hydraulic Bracket AssemblySuits ORC50 over-ride coupling. Compatible with 3/4”, 7/8” and 1” master cylinder.
PART NO: FINISH: DRAW BAR MATCH:
BR50G GALvANISED 50mm x 75mm & 50mm x 100mm
BR75G GALvANISED 75mm x 75mm & 75mm x 100mm
BR100G GALvANISED 100mm x 100mm
Brake Arm To Suit Boat Trailers Suits ORC50 over-ride coupling.
TR
AILE
R C
OU
PLIN
GS
& A
CC
ES
SO
RIE
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
72
Trailer Coupling Parts & AccessoriesT
RA
ILE
R C
OU
PLI
NG
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
PART NO: PACK TyPE:
ADS50 BULK
Coupling Adjuster Bolt and NutSuits all 50mm over-ride couplings. ORC50 range.
PART NO: PACK TyPE:
ADS50S BULK
Coupling Adjuster Bolt and NutSuits all 50mm snap couplings. CAS22 & CAS32 range.
PART NO: PACK TyPE:
CSC50 BULK
CSCO50 BULK
Coupling Safety LatchSuits all 50mm trailer couplings. Available in a heavy duty over-ride option.
PART NO: PACK TyPE:
RL50 BULK
Coupling Reversing LatchSuits all 50mm over-ride coupling
PART NO: PACK TyPE:
CBP2 BULK
Coupling Base PlateSuits 2 hole snap couplings
PART NO: PACK TyPE:
CBP4 BULK
Coupling Base PlateSuits over-ride & electric couplings with 4 holes.
PART NO: PACK TyPE:
CBPv2 BULK
Coupling Base Plate - v Shape2 Hole base plate has now been upgraded to also suit 3 hole couplings.Suits 2 and 3 hole snap couplings
PART NO: PACK TyPE:
CBPv4 BULK
Coupling Base Plate v-ShapeNew V-shape design allows longer welds for larger trailers. Suits 4 hole over-ride & electric couplings.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
73
PART NO: PACK TyPE:
A760 BULK
3000kg 75mm Fixed Ring Coupling
PART NO: PACK TyPE:
A795 BULK
75mm Fixed Ring Coupling3500kg rated road use6000kg rated agricultural use
PART NO: PACK TyPE:
A790HBP BULK
Limited Swivel Base PlateSuits hydraulic over-ride A790 ring coupling.
PART NO: PACK TyPE:
A790MBP BULK
Limited Swivel Base PlateSuits mechanical over-ride A790 ring coupling.
PART NO: PACK TyPE:
A790 BULK
2250kg 75mm Ring CouplingWith over-ride brake facility.
PART NO: PACK TyPE:
A791 BULK
2250kg 75mm Ring Over-ride CouplingWithout brake facility.
PART NO:
PB700COM
2000kg Polyblock Coupling KitConsists of over-ride braked coupling, tow bar adaptor, 19mm locking pin & linch pin.
PART NO:
PB750COM
3000kg Polyblock Coupling KitConsists of non-braked coupling, tow bar adaptor, 19mm locking pin & linch pin.
PART NO:
PB700
2000kg Polyblock CouplingWith over-ride brake facility.
PART NO:
PB750
3000kg Polyblock Coupling No brake facility.
PART NO:
PB701
Polyblock Tow Bar Adaptor
PART NO:
PB703
19mm Locking Pin
PB704
Linch Pin
PART NO:
BT75
7/8” x 3” (75mm) Mounting Bolt, Spring Washer and Nut. Suits PB701 adaptor.
Offroad Couplings
75mm Ring Couplings
TR
AILE
R C
OU
PLIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
74
Master Cylinders & AccessoriesPART NO: PACK TyPE:
MSK34 BULK
MSK34B BLISTER
3/4” Master Cylinder
PART NO: PACK TyPE:
HBRM34 PAINTED
HBRM34z zINC PLATED
Hydraulic Bracket AssemblyFitted with 3/4” master cylinder.
PART NO: PACK TyPE:
MCC34 BULK
MCC34B BLISTER
3/4” Master Cylinder Cap
PART NO: PACK TyPE:
MSK78 BULK
7/8” Master Cylinder
PART NO: PACK TyPE:
CMB151 BULK
CMB152B BLISTER - SET OF 2
CMB153B BLISTER - SET OF 3
Coupling Mounting BoltHigh tensile, 1 1/2” x 1/2” with nyloc nuts, zinc plated.
PART NO: PACK TyPE:
CMB141 BULK
CMB44B BLISTER - SET OF 4
Coupling Mounting BoltHigh tensile, 4” x 1/2”, with nyloc nuts,zinc plated.
PART NO: PACK TyPE:
MSK1 BULK
1” Master Cylinder
PART NO: PACK TyPE:
HBRM78 BULK
Hydraulic Bracket AssemblyFitted with 7/8” master cylinder.
HBRM1 BULK
Hydraulic Bracket AssemblyFitted with 1” master cylinder.
BR
AK
E P
AR
TS
& A
CC
ES
SO
RIE
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
75
Trailer Brake Maximum Load Table
Brake Calipers & Accessories
PART NO: PACK TyPE:
CH100G BULK
Marine Hydraulic Brake Caliper•Designed with a rubber seal to protect the
piston against jamming caused by salt or dirt build up.
•Interchangeable with mechanical brakecaliper mounts suits standard mounting plates.
•Stainless steel bushes, sleeves and piston.
•Hot dipped galvanised body.
•Brake pads, mounting bolts and spring washers included.
PART NO: PACK TyPE:
CM100G BULK
CM100GD DISPLAY
Mechanical Brake CaliperGalvanised body with stainless steel components. Complete with pads and mounting bolts, suits 1/2” and 5/8” disc hubs.
PART NO: BOLT HOLE SPACINGS “A”
CM100G 90
CH100G 90A
BR
AK
E PA
RT
S &
AC
CE
SS
OR
IES
Trailer Disc Brake - recommended maximum load table
1. All loadings based on GTM of trailer.2. Consideration must be given to the vehicle tow rating, road surface conditions,
trailer tyre size and condition, trailer rim size and weather conditions.
Disc BrakesHydraulic with 260mm disc hub
Part No. Description Method of Operation Recommended Maximum Load on 13”/14” Wheels
Recommended Maximum Load on 15”/16” Wheels
CH100G Single Caliper Hydraulic 2000 kg per axle 2000kg per axle
Mechanical with 260mm disc hub
Part No. Description Method of Operation Recommended Maximum Load on 13”/14” Wheels
Recommended Maximum Load on 15”/16” Wheels
CM100G Single Caliper Forward Pull 2000kg per axle 2000kg per axle
Part numbers for disc hubs that are covered by this table
Plain Galvanised Velox
DH12HQ/HQF DH12HQD VDR12HTG
DH12HT/HTF DH12HQFG
DH12FH DH12HTG
DH12FD DH12HTFG
DH12CD/CDF DH12FHG
DH585LF DH12FDG
DH58LF DH58LFG
Tyre sizes covered by this table
13” 14” 15” 16”
175/R13 185/R14 205/R15 205/R16
195/R15 195/R16
7.5/R16
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
76
BR
AK
E P
AR
TS
& A
CC
ES
SO
RIE
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
Brake Caliper Parts
PART NO: PACK TyPE:
BCA100G BULK
Brake Caliper ArmSuits mechanical brake caliper
PART NO: PACK TyPE:
BCS16 BULK
Brake Caliper SpringSuits mechanical brake caliper
BCB1150 BULK
Brake Caliper Mounting BoltsSuits mechanical brake caliper
BCH100G BULK
Brake Caliper HammerSuits mechanical brake caliper
CH200M-OR BULK
Spare O-ringTo suit hydraulic caliper
SSS16612 BULK
Stainless Steel Brake Caliper SlidesSuits mechanical brake caliper
Brake Accessories
PART NO: PACK TyPE:
CA10 BULK
CA10B BLISTER
Brake Cable AdjusterWith combined pulley and turnbuckle, zinc plated.
PART NO: PACK TyPE:
CAS10 BULK
Brake Cable AdjusterStainless steel fittings and galvanised body.
PART NO: PACK TyPE:
BCC05G BULK
Brake Cable Clamp5mm, galvanised finish.
PART NO: PACK TyPE:
BCC04G BULK
BCC04B BLISTER
Brake Cable Clamps4 x 4mm, galvanised finish.
TR
AIL
ER
S
77V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
BR
AK
E PA
RT
S &
AC
CE
SS
OR
IES
Hydraulic Brake Fitting Kit
PART NO: PACK TyPE:
HBFK34 BULK
Hydraulic Brake Fitting Kit5.4 metres of bundy tube with fittings.
PART NO: PACK TyPE:
DP1028 BULK
DP1028B BLISTER
Disc PadsSuits brake caliper (1 pair).
PART NO: PACK TyPE:
BCC4B BLISTER
Brake Cable4mm x 8 metres, 7x7 galvanised wire cable with 4 clamps to suit.
PART NO: PACK TyPE:
BCC4 BULK
Brake Cable4mm, 7x7 galvanised - 500 metre roll.
PART NO: PACK TyPE:
BCCB4 BULK
Brake Sheathed Cable4mm, 7x7 galvanised with PVC coating - 500 metre roll.
TR
AILE
RS
78
BR
AK
E P
AR
TS
& A
CC
ES
SO
RIE
S Brake Caliper Mounting PlatesPART NO: PACK TyPE: FINISH:
MP39 BULK BLACK
MP39G BULK GALvANISED
MP39GB BLISTER GALvANISED
Brake Caliper Mounting PlateCentre type, suits 39mm round axle.
PART NO: PACK TyPE: FINISH:
MP40 BULK BLACK
MP40G BULK GALvANISED
MP40GB BLISTER GALvANISED
Brake Caliper Mounting PlateCentre type, suits 40mm square axle.
PART NO: PACK TyPE: FINISH:
MP45 BULK BLACK
MP45G BULK GALvANISED
MP45GB BLISTER GALvANISED
Brake Caliper Mounting PlateCentre type, suits 45mm square axle.
PART NO: PACK TyPE: FINISH:
MPO39 BULK BLACK
Brake Caliper Mounting PlateOff centre type, suits 39mm round axle.
PART NO: PACK TyPE: FINISH:
MPO40 BULK BLACK
Brake Caliper Mounting PlateOff centre type, suits 40mm square axle
PART NO: PACK TyPE: FINISH:
MPO45 BULK BLACK
Brake Caliper Mounting PlateOff centre type, suits 45mm square axle.
PART NO: PACK TyPE: FINISH:
MPL45 BULK BLACK
Brake Caliper Mounting PlateCentre type suits Landcruiser and 45mm square axle.
PART NO: PACK TyPE: FINISH:
MPR45 BULK BLACK
Brake Caliper Mounting PlateCentre type, suits 45mm round axle.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
79
Hub Drum Brake Plates
PART NO: PACK TyPE:
MPS40S BULK
Square Mounting PlateSuits 40mm square axle.
PART NO: PACK TyPE:
MPS45S BULK
Square Mounting PlateSuits 45mm square axle.
PART NO: PACK TyPE:
MPS45R BULK
Square Mounting PlateSuits 45mm round axle.
PART NO: PACK TyPE:
MPS40R BULK
Square Mounting PlateSuits 40mm round axle.
PART NO: PACK TyPE:
MPR40S BULK
Round Mounting PlateSuits 40mm square axle.
PART NO: PACK TyPE:
MPR45S BULK
Round Mounting PlateSuits 45mm square axle.
PART NO: PACK TyPE:
MPR45R BULK
Round Mounting PlateSuits 45mm round axle.
PART NO: PACK TyPE:
MPR50S BULK
Round Mounting PlateSuits 50mm square axle.
PART NO: PACK TyPE:
MPR40R BULK
Round Mounting PlateSuits 40mm round axle.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
BR
AK
E PA
RT
S &
AC
CE
SS
OR
IES
Mounting plates compatible with hydraulic drum brakes.
Mounting plates compatible with mechanical and electric drum brakes.
TR
AILE
RS
80
Trailer Brake recommended maximum load table:
1. All loadings based on GTM of trailer.2. Consideration must be given to the vehicle tow rating, road surface conditions,
trailer tyre size and condition, trailer rim size and weather conditions.
Drum Brakes
Part No. Description Method of Operation Recommended Maximum Load on 13”/14” Wheels
Recommended Maximum Load on 15”/16” Wheel
EBP10R 10” single backing plate Electric 1600kg per axle 1400kg per axle
EBP10L 10” single backing plate Electric 1600kg per axle 1400kg per axle
EBP12R 12” single backing plate Electric n/a 2500kg per axle
EBP12L 12” single backing plate Electric n/a 2500kg per axle
MBP90R 9” single backing plate Mechanical 1200 kg per axle 1000 kg per axle
MBP90L 9” single backing plate Mechanical 1200 kg per axle 1000 kg per axle
HBP90R 9” single backing plate Hydraulic 1450kg per axle 1200kg per axle
HBP90L 9” single backing plate Hydraulic 1450kg per axle 1200kg per axle
Hub Drum Brakes & AccessoriesB
RA
KE
PA
RT
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
Part numbers for hubs drums that are covered by this table
12 inch 10 inch 9 inch
HD12X2LF HD10X2FD HD9X134FD
HD10X2FH HD9X134FH
HD10X2HQ HD9X134HQ
HD10X2HT HD9X134HT
HD10X25LF HD9X1345LT
HD10X2LF HD9X134LF
HD10X2LH HD9X134LH
Tyre sizes covered by this table
13” 14” 15” 16”
175/R13 185/R14 205/R15 205/R16
195/R15 195/R16
7.5/R16
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
81
BR
AK
E PA
RT
S &
AC
CE
SS
OR
IES
TR
AILE
RS
PART NO: PACK TyPE:
MBP90R BULK
9” Mechanical Backing Plate Right hand side.
MBP90L BULK
9” Mechanical Backing PlateLeft hand side.
HBP90L BULK
9” Hydraulic Backing PlateLeft hand side.
PART NO: PACK TyPE:
HBP90R BULK
9” Hydraulic Backing PlateRight hand side.
PART NO: PACK TyPE:
EBPMAG BULK
EBPMAGB BLISTER
Magnet To suit 10” electrical backing plate.
PART NO: PACK TyPE:
EBP10R BULK
10” Electric Backing Plate Right hand side.
EBP10L BULK
10” Electric Backing PlateLeft hand side.
EBP12R BULK
12” Electric Backing PlateRight hand side.
EBP12L BULK
12” Electric Backing Plate Left hand side.
PART NO: PACK TyPE:
HDBS9 BULK
Brake ShoesTo suit 9” mechanical backing plate. Set of 2.
PART NO: PACK TyPE:
HDBS10 BULK
Brake ShoesTo suit 10” electric backing plate. Set of 2.
PART NO: PACK TyPE:
HDBS9H BULK
Brake ShoesTo suit 9” hydraulic backing plate. Set of 2.
Hub Drum Brakes & Accessories
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
82
BR
AK
E P
AR
TS
& A
CC
ES
SO
RIE
S Mechanical Disc Brake Kit
Electric Drum Brake Kit
STUD PATTERN BEARING STUD PCD (mm)
SUIT AXLE (mm)
SINGLE AXLE CAPACITy
BRAKE LOAD PER AXLE 13” & 14” WHEELS
BRAKE LOAD PER AXLE 15” / 16” WHEELS (kg)
FINISH PART NUMBER
COMMODORE
HOLDEN 5 x 120 40 1000 2000 2000 PLAIN STEEL DBK40CD
FORD 5 x 120 45 1500 2000 2000 PLAIN STEEL DBK45CDF
FORD 5 x 120 45 1500 2000 2000 GALvANISED DBK45CDFG
FORD
HOLDEN 5 x 114.3 40 1000 2000 2000 PLAIN STEEL DBK40FH
HOLDEN 5 x 114.3 40 1000 2000 2000 GALvANISED DBK40FHG
FORD 5 x 114.3 45 1500 2000 2000 PLAIN STEEL DBK45FD
FORD 5 x 114.3 45 1500 2000 2000 GALvANISED DBK45FDG
HQ HOLDEN
HOLDEN 5 x 120.65 40 1000 2000 2000 PLAIN STEEL DBK40HQ
HOLDEN 5 x 120.65 40 1000 2000 2000 GALvANISED DBK40HQG
FORD 5 x 120.65 45 1500 2000 2000 PLAIN STEEL DBK45HQF
FORD 5 x 120.65 45 1500 2000 2000 GALvANISED DBK45HQFG
HT HOLDEN
HOLDEN 5 x 107.95 40 1000 2000 2000 PLAIN STEEL DBK40HT
HOLDEN 5 x 107.95 40 1000 2000 2000 GALvANISED DBK40HTG
FORD 5 x 107.95 45 1500 2000 2000 PLAIN STEEL DBK45HTF
FORD 5 x 107.95 45 1500 2000 2000 GALvANISED DBK45HTFG
HT vELOx HOLDEN 5 x 107.95 40 1000 2000 2000 GALvANISED DBK40vHTG
LANDCRUISER
FORD 5 x 150 45 1500 2000 2000 PLAIN STEEL DBK455LF
FORD 6 x 139.7 45 1500 2000 2000 PLAIN STEEL DBK45LF
FORD 6 x 139.7 45 1500 2000 2000 GALvANISED DBK45LFG
Mechanical Disc Brake Kit Complete kit for retro fitting Mechanical Disc Brakes to a single axle on your trailer. Kit comprises:- 2T over-ride coupling, coupling base plate, coupling mounting bolts, mechanical brake arm, brake cable adjuster, brake cable clamps, mechanical brake calipers, mounting plates and disc rotors.
STUD PATTERN BEARING STUD PCD (mm)
SUIT AXLE (mm)
SINGLE AXLE CAPACITy
BRAKE LOAD PER AXLE 13” & 14” WHEELS
BRAKE LOAD PER AXLE 15” / 16” WHEELS (kg)
FINISH PART NUMBER
FORDHOLDEN 5 x 114.3 40 1000 1600 1400 PLAIN STEEL EBK40FH
FORD 5 x 114.3 45 1500 1600 1400 PLAIN STEEL EBK45FD
HQ HOLDEN HOLDEN 5 x 120.65 40 1000 1600 1400 PLAIN STEEL EBK40HQ
HT HOLDEN HOLDEN 5 x 107.95 40 1000 1600 1400 PLAIN STEEL EBK40HT
LANDCRUISERHOLDEN 6 x 139.7 40 1000 1600 1400 PLAIN STEEL EBK45LH
FORD 6 x 139.7 45 1500 1600 1400 PLAIN STEEL EBK45LF
10” Electric Drum Brake Kit Complete kit for retro fitting Electric Drum Brakes to a single axle on your trailer. Kit comprises:- 3.5T electric coupling, coupling base plate, coupling mounting bolts, brake cable adjuster, brake cable clamps, 10” electric backing plates, mounting plates and 10” hub drums.
4x
4x1x 1x
1x
2 x2 x1 x right1 x left
2x2x2x
4x
4x
1x 1x1x
1x
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
83
STUD PATTERN BEARING STUD PCD (mm)
SUIT AXLE (mm)
SINGLE AXLE CAPACITy
BRAKE LOAD PER AXLE 13” & 14” WHEELS
BRAKE LOAD PER AXLE 15” / 16” WHEELS (kg)
FINISH PART NUMBER
FORDHOLDEN 5 x 114.3 40 1000 1450 1200 PLAIN STEEL HBK40FH
FORD 5 x 114.3 45 1500 1450 1200 PLAIN STEEL HBK45FD
HQ HOLDEN HOLDEN 5 x 120.65 40 1000 1450 1200 PLAIN STEEL HBK40HQ
HT HOLDEN HOLDEN 5 x 107.95 40 1000 1450 1200 PLAIN STEEL HBK40HT
LANDCRUISERHOLDEN 6 x 139.7 40 1000 1450 1200 PLAIN STEEL HBK45LH
FORD 6 x 139.7 45 1500 1450 1200 PLAIN STEEL HBK45LF
9” Hydraulic Drum Brake Kit Complete kit for retro fitting Hydraulic Drum Brakes to a single axle on your trailer. Kit comprises:- 2T over-ride coupling, coupling base plate, coupling mounting bolts, hydraulic brake arm, 3/4” master cylinder, hydraulic brake lines, 9” hydraulic backing plates, mounting plates and 9” hub drums.
STUD PATTERN BEARING STUD PCD (mm)
SUIT AXLE (mm)
SINGLE AXLE CAPACITy
BRAKE LOAD PER AXLE 13” & 14” WHEELS
BRAKE LOAD PER AXLE 15” / 16” WHEELS (kg)
FINISH PART NUMBER
FORDHOLDEN 5 x 114.3 40 1000 1200 1000 PLAIN STEEL MBK40FH
FORD 5 x 114.3 45 1500 1200 1000 PLAIN STEEL MBK45FD
HQ HOLDEN HOLDEN 5 x 120.65 40 1000 1200 1000 PLAIN STEEL MBK40HQ
HT HOLDEN HOLDEN 5 x 107.95 40 1000 1200 1000 PLAIN STEEL MBK40HT
LANDCRUISERHOLDEN 6 x 139.7 40 1000 1200 1000 PLAIN STEEL MBK45LH
FORD 6 x 139.7 45 1500 1200 1000 PLAIN STEEL MBK45LF
9” Mechanical Drum Brake Kit Complete kit for retro fitting Mechanical Drum Brakes to a single axle on your trailer. Kit comprises:- 2T over-ride coupling, coupling base plate, coupling mounting bolts, mechanical brake arm, brake cable adjuster, brake cable clamps, 9” mechanical backing plates, mounting plates and 9” hub drums.
Hydraulic Drum Brake Kit
Mechanical Drum Brake Kit
BR
AK
E PA
RT
S &
AC
CE
SS
OR
IES
TR
AILE
RS
1x 2x 2x 2x
1x 1x1x
1x
4x
1x
1x
4x2x 2x1x
1 x left 1 x right
4x
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
84
Ark Corporation carries a wide selection of high quality cast iron trailer hubs in galvanised and plain steel finish. Our range includes non-braked Lazy hubs and braked hubs in the form of Disc Rotors and Hub Drums. All our hub kits come complete with seals, dust caps, stud nuts, bearings and pre-pressed studs and bearing cups. We also supply a large range of replacement parts so whether you are replacing your entire hub or re-building the old one, it is very important to use the proper size replacement parts.
Below are just a few key points to consider when selecting and replacing your hub.
1. Determine the number and size of studs.
2. Work out the stud pattern, this is done by measuring the PCD (Pitch Circle Diameter) on your hub. Refer to the diagram, at the bottom of the next page (page 85).
3. Determine the Inner and Outer bearing size. Most bearings are stamped with a reference number that can be used to easily identify its inside diameter. Another easy way is to measure your axle’s size i.e 39mm Round or 40mm Square axles generally use LM Bearings (Holden) and 45mm Square axles use SL Bearings (Ford).
Hubs can be running numerous bearing combinations so it is important to determine your bearing size accurately. Below are just a few combinations:-
• Tapered Hub – This is the most common hub utilised where the hub will run on the axle with a large inner and small outer bearing.
• Parallel Hub – This hub is utilised where a larger carrying capacity is needed for that axle setup. The hub runs on the axle with a large inner and outer bearing.
When rebuilding or servicing your existing hub body, it is important to do the following:-
• Check that all your studs and nuts are intact with clean threads free from burs.
• Bearings!! Regular maintenance on bearings is essential. When replacing the bearing in your hub remember to replace the inner and outer races or cups. Even if the cups don’t show sign of wear they should be replaced to maintain proper bearing tolerance. Thoroughly grease the bearings by working grease around rollers then pack the hub interior before installing a new grease seal in the back of hub
• Check that the rubbers on your grease seals are intact and free from tears, these seals play an integral role of your bearing set up and should not be neglected.
• Ensure dust cap is intact as this prevents water and dust getting into your bearings, its best to utilise a pair of bearing buddies as these units maintain a good level of grease in your bearings and it allows easy top up of bearings with a grease gun.
• Check axle to ensure it is free from burs, cracks and any sign of deformation, if need be replace your axle. Refer to Axle – How To Guide (page 99).
• Bearing grease quality is another important consideration, especially for boat trailers that are constantly submerged in water after a long trip. Marine trailer bearing grease provides outstanding water washout and excellent corrosion protection caused by salt water.
Wheel Hubs: Technical InformationT
RA
ILE
R H
UB
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
85
Hub setup
Measuring stud PCD
PCDPCD
PCD
4 Studs 5 Studs
6 Studs
Large inner bearing
Hub with pre-pressed bearing cups
Axle washer and nut
Castle nut
Dust capSplit pin
Small outer bearing
Axle
Bearing seal / oil seal
Wheel Hubs: Technical Information TR
AILE
R H
UB
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
86
Trailer Hubs - Non-braked - Plain FinishT
RA
ILE
R H
UB
ST
RA
ILE
RS
Non-brake trailer hubs complete with bearings, dust cap, seal, fitted with studs and nuts.
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
COMMODORE
HOLDEN 5 x 120 70.53 7/16 150 (6”) 39-40 PLAIN CD150
FORD 5 x 120 70.53 7/16 150 (6”) 45 PLAIN CDF150
HOLDEN 5 x 120 70.53 1/2 150 (6”) 39-40 PLAIN CD15012
FORD
FORD 5 x 114.3 67.18 1/2 150 (6”) 45 PLAIN FD150
HOLDEN 5 x 114.3 67.18 1/2 150 (6”) 39-40 PLAIN FH150
HOLDEN 5 x 114.3 67.18 1/2 150 (6”) 39-40 DISPLAY FH150D
HQ HOLDEN
HOLDEN 5 x 120.65 70.91 7/16 150 (6”) 39-40 PLAIN HQ150
HOLDEN 5 x 120.65 70.91 7/16 150 (6”) 39-40 DISPLAY HQ150D
FORD 5 x 120.65 70.91 7/16 150 (6”) 45 PLAIN HQF150
HT HOLDEN
HOLDEN 5 x 107.95 63.95 7/16 140 (5.5”) 39-40 PLAIN HT140
HOLDEN 5 x 107.95 63.95 7/16 150 (6”) 39-40 PLAIN HT150
HOLDEN 5 x 107.95 63.95 7/16 150 (6”) 39-40 DISPLAY HT150D
FORD 5 x 107.95 63.95 7/16 150 (6”) 45 PLAIN HTF150
LANDCRUISER/NISSAN
FORD 5 x 150 88.2 9/16 190 (7.5”) 45 PLAIN LF1905
FORD 6 x 139.7 69.85 1/2 190 (7.5”) 45 PLAIN LF190
FORD 6 x 139.7 69.85 1/2 190 (7.5”) 45 DISPLAY LF190D
HOLDEN 6 x 139.7 69.85 1/2 190 (7.5”) 39-40 PLAIN LH190
HOLDEN 6 x 139.7 69.85 1/2 190 (7.5”) 39-40 DISPLAY LH190D
GEMINI/BMW HOLDEN 4 x 100 70.71 7/16 150 (6”) 39-40 PLAIN GH150
MINI HOLDEN 4 x 101.6 71.8 7/16 140 (5.5”) 39-40 PLAIN MH140
SUBARU HOLDEN 5 x 100 58.77 7/16 150 (6”) 39-40 PLAIN SH150
TOYOTA / DATSUN
HOLDEN 4 x 114.3 80.8 7/16 150 (6”) 39-40 PLAIN TH150
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
87
TR
AILE
R H
UB
ST
RA
ILER
S
Trailer Hubs - Non-braked - Galvanised Finish
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
COMMODOREHOLDEN 5 x 120 70.53 7/16 150 (6”) 39-40 PLAIN CD150G
FORD 5 x 120 70.53 7/16 150 (6”) 45 PLAIN CDF150G
Non-brake trailer hubs complete with bearings, dust cap, marine seal, fitted with studs and nuts.
FORD
FORD 5 x 114.3 67.18 1/2 150 (6”) 45 PLAIN FD150G
HOLDEN 5 x 114.3 67.18 1/2 150 (6”) 39-40 PLAIN FH150G
HOLDEN 5 x 114.3 67.18 1/2 150 (6”) 39-40 DISPLAY FH150GD
GEMINI/BMW HOLDEN 4 x 100 70.71 7/16 150 (6”) 39-40 PLAIN GH150G
HQ HOLDENHOLDEN 5 x 120.65 70.91 7/16 150 (6”) 39-40 PLAIN HQ150G
HOLDEN 5 x 120.65 70.91 7/16 150 (6”) 39-40 DISPLAY HQ150GD
HT HOLDEN
HOLDEN 5 x 107.95 63.95 7/16 140 (5.5”) 39-40 PLAIN HT140G
HOLDEN 5 x 107.95 63.95 7/16 140 (5.5”) 39-40 DISPLAY HT140GD
HOLDEN 5 x 107.95 63.95 7/16 150 (6”) 39-40 PLAIN HT150G
HOLDEN 5 x 107.95 63.95 7/16 150 (6”) 39-40 DISPLAY HT150GD
FORD 5 x 107.95 63.95 7/16 150 (6”) 45 PLAIN HTF150G
LANDCRUISER/NISSAN
FORD 6 x 139.7 69.85 1/2 190 (7.5”) 45 PLAIN LF190G
MINI HOLDEN 4 x 101.6 71.8 7/16 140 (5.5”) 39-40 PLAIN MH140G
TOYOTA / DATSUN
HOLDEN 4 x 114.3 80.8 7/16 150 (6”) 39-40 PLAIN TH150G
HOLDEN 4 x 114.3 80.8 7/16 150 (6”) 39-40 DISPLAY TH150GD
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
88
TR
AIL
ER
DIS
C H
UB
ST
RA
ILE
RS
Trailer Disc Brake Hubs - Plain Finish
Trailer disc brake hubs complete with bearings, dust cap, seal, fitted with studs and nuts.
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
COMMODOREHOLDEN 5 x 120 70.53 7/16 260 (10”) 39-40 PLAIN DH12CD
FORD 5 x 120 70.53 7/16 260 (10”) 45 PLAIN DH12CDF
FORD
FORD 5 x 114.3 67.18 1/2 260 (10”) 45 PLAIN DH12FD
HOLDEN 5 x 114.3 67.18 1/2 260 (10”) 39-40 PLAIN DH12FH
HOLDEN 5 x 114.3 67.18 1/2 260 (10”) 39-40 DISPLAY DH12FHD
HQ HOLDENHOLDEN 5 x 120.65 70.91 7/16 260 (10”) 39-40 PLAIN DH12HQ
FORD 5 x 120.65 70.91 7/16 260 (10”) 45 PLAIN DH12HQF
HT HOLDENHOLDEN 5 x 107.95 63.95 7/16 260 (10”) 39-40 PLAIN DH12HT
FORD 5 x 107.95 63.95 7/16 260 (10”) 45 PLAIN DH12HTF
LANDCRUISER/NISSAN
FORD 5 x 150 88.2 9/16 297 (11.7”) 45 PLAIN DH585LF
FORD 6 x 139.7 69.85 1/2 297 (11.7”) 45 PLAIN DH58LF
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
89
TR
AILE
R D
ISC
HU
BS
TR
AILE
RS
Trailer Disc Brake Hubs - Galvanised Finish
Velox Disc Brake Hub - Galvanised Finish
Trailer disc brake hubs complete with bearings, dust cap, marine seal, fitted with studs and nuts.
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
COMMODOREFORD 5 x 120 70.53 7/16 260 (10”) 45 PLAIN DH12CDFG
HOLDEN 5 x 120 70.53 7/16 260 (10”) 39-40 PLAIN DH12CDG
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
HT HOLDEN HOLDEN 5 x 107.95 63.95 7/16 260 (10”) 39-40 PLAIN vDR12HTG
FORDFORD 5 x 114.3 67.18 1/2 260 (10”) 45 PLAIN DH12FDG
HOLDEN 5 x 114.3 67.18 1/2 260 (10”) 39-40 PLAIN DH12FHG
HQ HOLDENFORD 5 x 120.65 70.91 7/16 260 (10”) 45 PLAIN DH12HQFG
HOLDEN 5 x 120.65 70.91 7/16 260 (10”) 39-40 PLAIN DH12HQG
HT HOLDEN
FORD 5 x 107.95 63.95 7/16 260 (10”) 45 PLAIN DH12HTFG
FORD 5 x 107.95 63.95 7/16 260 (10”) 45 DISPLAY DH12HTFGD
HOLDEN 5 x 107.95 63.95 7/16 260 (10”) 39-40 PLAIN DH12HTG
LANDCRUISER/NISSAN
FORD 6 x 139.7 69.85 1/2 297 (11.7”) 45 PLAIN DH58LFG
Trailer velox disc brake hubs complete with bearings, dust cap, marine seal, fitted with studs and nuts.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
90
10” Hub Drums - Plain Finish - Tapered Bearings
10” Hub Drums - Plain Finish - Parallel Bearings
New 12” Hub Drums - Plain Finish
9” Hub Drums - Plain Finish
TR
AIL
ER
HU
B D
RU
MS
TR
AIL
ER
S
Trailer hub drum complete with bearings, dust cap, seal, fitted with studs and nuts.
Trailer hub drum complete with bearings, dust cap, seal, fitted with studs and nuts.
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters(internal)
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
FORDFORD 5 x 114.3 67.18 1/2 254 (10”) 45 PLAIN HD10x2FD
HOLDEN 5 x 114.3 67.18 1/2 254 (10”) 39-40 PLAIN HD10x2FH
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters(internal)
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
FORD FORD 5 x 114.3 67.18 1/2 254 (10”) 45 PLAIN HD10x2FDP
STUD PATTERN BEARING TyPE STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
LANDCRUISER/NISSAN
1. 4T - 15123/15241
2. 4T - 302106 x 139.7 69.85 1/2 305 (12”) 50 PLAIN HD12x2LF
STUD PATTERN BEARING TyPE
STUD PCD - millimeters
STUD DISTANCE - millimeters
STUD SIZE - Inches
HUB SIZE - millimeters(internal)
SUIT AXLE - millimeters
CARTON TyPE:
PART NO
FORDFORD 5 x 114.3 67.18 1/2 228 (9”) 45 PLAIN HD9x134FD
HOLDEN 5 x 114.3 67.18 1/2 228 (9”) 39-40 PLAIN HD9x134FH
HQ HOLDEN HOLDEN 5 x 120.65 70.91 7/16 254 (10”) 39-40 PLAIN HD10x2HQ
HQ HOLDEN HOLDEN 5 x 120.65 70.91 7/16 228 (9”) 39-40 PLAIN HD9x134HQ
HT HOLDEN HOLDEN 5 x 107.95 63.95 7/16 254 (10”) 39-40 PLAIN HD10x2HT
HT HOLDEN HOLDEN 5 x 107.95 63.95 7/16 228 (9”) 39-40 PLAIN HD9x134HT
LANDCRUISER/NISSAN
FORD 5 x 150 88.2 9/16 254 (10”) 45 PLAIN HD10x25LF
FORD 6 x 139.7 69.85 1/2 254 (10”) 45 PLAIN HD10x2LF
HOLDEN 6 x 139.7 69.85 1/2 254 (10”) 39-40 PLAIN HD10x2LH
LANDCRUISER FORD 6 x 139.7 69.85 1/2 254 (10”) 45 PLAIN HD10x2LFP
LANDCRUISER/NISSAN
FORD 5 x 150 88.2 9/16 228 (9”) 45 PLAIN HD9x1345LF
FORD 6 x 139.7 69.85 1/2 228 (9”) 45 PLAIN HD9x134LF
HOLDEN 6 x 139.7 69.85 1/2 228 (9”) 39-40 PLAIN HD9x134LH
Trailer hub drum complete with bearings, dust cap, seal, fitted with studs and nuts.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
91
Trailer Wheels - Painted Finish
Trailer Wheels - Galvanised FInish
Sunraysia style rims & tyres
Sunraysia style rims & tyres
SW15LOW 15 LANDCRUISER - 6 x 139.7mm 0mm LT235/75R15 900KG WHITE
SW14LW 14 LANDCRUISER - 6 x 139.7mm 0mm 185R14C 850KG WHITE
PART NO: SIZE (“) STUD PATTERN: OFFSET: TyRE SIZE: RATING: FINISH:
SW13W 13 FORD - 5 x 114.3mm 0mm 155/80 437KG WHITE
SW14FW 14 FORD - 5 x 114.3mm 0mm 185R14C 850KG WHITE
PART NO: SIZE (“) STUD PATTERN: OFFSET: TyRE SIZE: RATING: FINISH:
SW13HTFG 13 MULTIFIT FORD - 5 x 114.3mmHT - 5 x107.95mm
0mm 155R13C 515KG GALvANISED
TR
AILE
R W
HE
ELS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
92
BR
AK
E C
ON
TR
OLL
ER
S &
BR
EA
K-A
WA
Y K
IT
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
Electric Brake Controllers
PART NO: PACK TyPE:
EBCx4 BULK
Electric Brake Controller with LED IndicatorCompact power: strong and dependable time-based trailer braking in a small, sleek design.
Infinite adjustability: the X4 features infinite adjustability in both output and ramp time settings.
• Supports 2 to 6 brake trailers
• No leveling required
• Reverse wire protection
• Operates seamlessly with electric over hydraulic braking systems
• Solid state dependability
• Self diagnostic
• Does not interfere with anti-lock brakes, cruise control or other vehicle electrical systems.
PART NO: PACK TyPE:
EBCx8 BULK
Electric Brake Controller with Digital DisplayCompact power: strong and dependable the X8 is as much as 33% smaller than other controls.
Faster & stronger: the X8 is twice as fast as similar controls.
• Supports 2, 4, 6 or 8 brake trailers
• No leveling required
• Reverse wire protection
• Operates seamlessly with electric over hydraulic braking systems
• F.E.T. (Field Effect Transistor) technology
• Comprehensive diagnostic error codes
• Does not interfere with anti-lock brakes, cruise control or other vehicle electrical systems.
1
2
4
5 6
3
95mm
75mm
25m
m
1
2
4
56
3
1. Easy-mount bracket2. Harness plug3. Ramp time slider
4. Output level knob5. Dual LED indicators6. Manual override lever
1. Easy-mount bracket2. Harness plug3. Ramp time slider
4. Output level knob5. Digital display6. Manual override lever
93
Electric Break-away Kit
PART NO: PACK TyPE:
EBS24 BULK
Electric Break-away Switch
BR
AK
E C
ON
TR
OLLE
RS
& B
RE
AK
-AW
AY
KIT
TR
AILE
RS
PART NO: PACK TyPE:
EBK26 BULK
“Interceptor” Break-Away SystemSuitable for 2, 4 and 6 wheel brake systems, interceptor acts as both a battery tester and battery charging system which is built to bring trailers safely to a stop should a trailer be disconnected while driving.
BREAK-AWAYSWITCH
12V (+) (BLACK)
TRAILER BRAKES(BLACK)
BRAKE CONT. OUTPUT (BLUE)
TRAILERCHASSIS GROUND
12 VOLTTRAILER
BREAK-AWAYBATTERY
TRAILER CHASSIS GROUND
Push-to-TestPanel
12V(+) (RED)
NEG-
POS+
12V(-) (BLACK)
TRAILERCONNECTOR
12V (-) (WHITE)
12V (+) (YELLOW)
Interceptor Break-Away System’s wiring instructions
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
94
Bearings, Seals & Dust Covers
PART NO: PACK TyPE:
BK32 BLISTER
Trailer Bearing KitHolden type bearings, suits 39mm round and 40mm square trailer axle. Kit consists of small and large bearings, seal, dust cover and split pin.
PART NO: PACK TyPE:
HBS32 BULK
Holden Type Bearings3/4” cone LM11949/10, suits 39mm round and 40mm square trailer axle.
PART NO: PACK TyPE:
DC45 BULK
DC45B BLISTER
zinc Plated Dust CoverSuits Ark 5 1/2” and 6” disc, 9” & 10” hubs with tapered bearings.
PART NO: PACK TyPE:
DC65 BULK
zinc Plated Dust CoverSuits Ark 12” drums & 10” drums with parallel bearings.
PART NO: PACK TyPE:
MBK32 BLISTER
Marine Bearing KitHolden type bearings, suits 39mm round and 40mm square trailer axle. Kit consists of small and large bearings, waterproof seal and split pin.
PART NO: PACK TyPE:
MS32 BULK
Holden Type Waterproof Bearing SealSuits 39mm round axle and 40mm square trailer axle.
PART NO: PACK TyPE:
MBK35 BLISTER
Marine Bearing KitFord type (slim line) bearings, suits 45mm square trailer axle. Kit consists of small and large bearings, waterproof seal and split pin.
MS35 BULK
Ford Type Waterproof Bearing SealSuits 45mm square trailer axle.
BS32 BULK
Holden Type Bearing SealSuits 39mm round and 40mm square trailer axle.
HBL32 BULK
Holden Type Bearings1 1/4” cone LM67048/10, suits 39mm round and 40mm square trailer axle.
FBS35 BULK
Ford Type Bearings (Slim line) 7/8” cone LM12749/10, suits 45mm square trailer axle.
FBL35 BULK
Ford Type Bearings(Slim line) 1 3/8” cone L68149/10, suits 45mm square trailer axle.
BS35 BULK
Ford Type Bearing SealSuits 45mm square trailer axle.
PART NO: PACK TyPE:
BK35 BLISTER
Trailer Bearing KitFord type (slim line) bearings, suits 45mm square trailer axle. Kit consists of small and large bearings, seal, dust cover and split pin.
TR
AIL
ER
HU
B A
CC
ES
SO
RIE
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
95
TR
AILE
R H
UB
AC
CE
SS
OR
IES
Wheel Bearing Protectors
Registration Label Holder
Wheel Studs
PART NO: PACK TyPE:
ST12B BLISTER
1/2” UNF x 41mm Wheel Studs and Nuts Set of 6, zinc plated.
PART NO: PACK TyPE:
ST716B BLISTER
7/16” UNF x 41mm Wheel Studs and Nuts Set of 5, zinc plated.
PART NO: PACK TyPE:
MBP34 BULK
MBP34B BLISTER
Bearing ProtectorChrome plated, complete with blue PVC dust caps. Set of 2.
PART NO: PACK TyPE:
SBP34 BULK
SBP34B BLISTER
Bearing ProtectorStainless steel, complete with blue PVC dust caps. Set of 2.
PART NO: PACK TyPE:
PBP35 BULK
PBP35B BLISTER
Bearing ProtectorImpact resistant, made from Polycarbonate. Set of 2.
PART NO: PACK TyPE:
MBC34B BLISTER
MBCB34 BULK
Dust and Water Protection CapMade from blue PVC. Set of 2
MBC34 BULK
Dust and Water Protection capMade from red PVC. Set of 2
PART NO: PACK TyPE:
RH12 BULK
Registration Label HolderDouble sided clear plastic.
PART NO: PACK TyPE:
ST716 BULK
7/16” UNF x 41mm Wheel StudHarden steel. Zinc plated.
PART NO: PACK TyPE:
SN716 BULK
7/16” UNF, Stud NutZinc plated.
ST12 BULK
1/2” UNF x 41mm Wheel StudHarden steel. Zinc plated.
ST916 BULK
9/16” UNF x 41mm Wheel Stud Harden steel. Zinc plated.
SN12 BULK
1/2” UNF, Stud NutZinc plated.
SN916 BULK
9/16” UNF Stud NutZinc plated.
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
96
1. Heavy duty frame with powder coated finish
2. Anti-siphon petrol lid protector
3. Anti-theft adjustable bar with padlock
4. Anti-rattle adjustable strap
5. Soft rubber pads on all sides
No more strained backs or awkward lifting,plus allows access where top loading is not possible
Remove padlock and adjustable strap. Raise anti-theft bar.
Lower anti-theft bar, lock padlock and secure adjustable strap.
Tilt jerry can forwards, place in base first, then lean back.
Carries and secures jerry cans up to 355mm (w) x 195mm (d) x 510mm (h)
New Front LoadingJerry Can Holder
1
2
4
3
5
Makes life on the road 20 kilo’s easier
JER
RY
CA
N H
OLD
ER
ST
RA
ILE
RS
PART NO: PACK TyPE:
JCHF20D DISPLAY
Front Loading Jerry Can HolderFront loading feature allows easy access where top loading is not possible. Carries & secures jerry cans up to 355mm (w) x 195mm (d) x 510mm (h)
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
97
Australia’s top sellingJerry Can Holder
with anti-siphon, anti-rattle & anti-theft protection
PART NO: PACK TyPE:
JCH1020D DISPLAY
Jerry Can Holder - Top LoadingCarries and secures jerry cans up to 355mm (w) x 180mm (d) x 477mm (h)
1. Anti-rattle adjustable strap
2. Anti-siphon petrol lid protector
3. Anti-theft adjustable bar with padlock
4. Heavy duty frame with powder coated finish
5. Soft rubber pads on all sides
1
2
4
3
5
JER
RY
CA
N H
OLD
ER
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
98
JER
RY
CA
N &
GA
S B
OT
TLE
HO
LDE
RS Standard Jerry Can Holder
PART NO: PACK TyPE:
JCH300z BULK
Standard Jerry Can HolderZinc plated, weld-on. 370mm (D) x 180mm (W) x 300mm (H)
9kg Gas Bottle Holder
4kg Gas Bottle Holder
PART NO: PACK TyPE:
GBH4G BULK
Adjustable Gas Bottle HolderSuits 4kg gas bottles. 260mm (W) x 175mm (H)
GBH9G BULK
Adjustable Gas Bottle HolderSuits 9kg gas bottles. 310mm (W) x 250mm (H)
Galvanised body with zinc plated mounts.
Galvanised body with zinc plated mounts.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
99
Axles: How to measure trailer axlesArk Corporation carries a wide range of Beam axles, Stub axles and axle accessories in various sizes, ratings and finishes such as black painted or galvanised.
When fitting new or replacing your existing axle, it is vital to consider your trailers GVM (Gross Vehicle Mass) which is the maximum weight of the trailer including its load. Fitting the incorrect axle to your trailer can lead to overloading your axle capacity, causing stress and fatigue to the axle which can lead to metal failure and potential fatal consequences on the road, so getting it right is vital!
Once you have your trailers GVM you can determine whether you need to run a single, dual or tri axle setup to accommodate the load. To work out your axle capacities for dual or tri-axle setup, simply divide the GVM over the amount of axles.
When building a new trailer or refurbishing an old trailer with new wheels, the following measurements need to be considered to correctly measure the axle required for your trailer:
“A” - Trailer Chassis width - Measure to outer most edges mm = mm+
“B” - Mudguard Width - Measure and include any mudguard spacers if used mm x 2 = mm+
”C” - Spacing between Chassis and tyre - Minimum spacing 25mm mm x 2 = mm+
Hub Nose - Using Ark hubs with tapered LM or SL bearings 55 mm x 2 = 110mm-
“D” - Wheel offset - Measured to outer hub face as per instructions below mm x 2 = mm-
Spacing between outer mudguard and tyre 10 mm = 10mm
“E” - Beam axle size required tip to tip in millimetres (-/+5mm) mm
Alternatively if you have your outer hub face measurement the following measurements need to be considered:
“F” - Outer hub face measurement mm = mm+
Hub Nose - Using Ark hubs with tapered LM and SL bearings 55 mm x 2 = 110mm
Beam axle size required tip to tip in millimetres (-/+5mm) mm
Measuring your wheel offset – To measure your wheel offset for Ark’s axle formula please follow the steps below:
• Inflate tyre to correct PSI as per manufacturers specifications.• Lay the rim and tyre combination face down on level ground.• Measure the distance from the ground to the upper most face of the rim,
this is where the hub face meets the rim.
IMPORTANT: Ensure the tyre utilised for your trailer fits within the mudguards and has a minimum clearance of 25mm from the chassis.
A-A ( 1 : 4 )
“B”
“F”
“D”
“C”“A”
“E”
TR
AILE
RS
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Ax
LES
& A
CC
ES
SO
RIE
S
100
PART NO: PACK TyPE:
A4097FH BULK
Braked Axle40mm square by 97” long with 1/2” Ford disc hubs - Black
A4079FH BULK
Braked Axle40mm square by 79” long with 1/2” Ford disc hubs - Black
A4097CD BULK
Braked Axle40mm square by 97” long with 1/2” Commodore disc hubs - Black
A4079CD BULK
Braked Axle40mm square by 79” long with 1/2” Commodore disc hubs - Black
A4578FD BULK
Braked Axle45mm square by 78” long with 1/2” Ford disc hubs - Black
NO PRE-ORDERING NEcESSARY!
We stock the following sizes:
Ark’s range of assembled braked axles are available in preset sizes. All axles come complete with welded mounting plates, mechanical brake calipers and 1/2” disc hubs.
PART NO: PACK TyPE:
A4077FH BULK
Braked Axle40mm square by 77” long with 1/2” Ford disc hubs - Black
A4597FD BULK
Braked Axle45mm square by 97” long with 1/2” Ford disc hubs - Black
A4095FH BULK
Braked Axle40mm square by 95” long with 1/2” Ford disc hubs - Black
Braked AxlesA
xLE
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
101
39mm round solid steel. Suits LM bearings. Carrying capacity 750kg. All axles supplied complete with slotted nuts, split pins and washers.
PART NO: PACK TyPE:
AxS3959 BULK
39mm x 59” (150cm)
PART NO: PACK TyPE:
AxS3960G BULK
39mm x 60” (152.5cm)
PART NO: PACK TyPE:
AxS3966G BULK
39mm x 66” (167.5cm)
PART NO: PACK TyPE:
AxS3972G BULK
39mm x 72” (183cm)
AxS3963G BULK
39mm x 63” (160cm)
AxS3968G BULK
39mm x 68” (173cm)
AxS3973G BULK
39mm x 73” (185.5cm)
AxS3976G BULK
39mm x 76” (193cm)
AxS3971G BULK
39mm x 71” (180.5cm)
AxS3964G BULK
39mm x 64” (162.5cm)
PART NO: PACK TyPE:
AxS3966 BULK
39mm x 66” (167.5cm)
PART NO: PACK TyPE:
AxS3973 BULK
39mm x 73” (185.5cm)
AxS3974 BULK
39mm x 74” (188cm)
AxS3967 BULK
39mm x 67” (170cm)
AxS3960 BULK
39mm x 60” (152.5cm)
AxS3963 BULK
39mm x 63” (160cm)
AxS3964 BULK
39mm x 64” (162.5cm)
AxS3965 BULK
39mm x 65” (165cm)
AxS3968 BULK
39mm x 68” (173cm)
AxS3971 BULK
39mm x 71” (180.5cm)
AxS3972 BULK
39mm x 72” (183cm)
AxS3977 BULK
39mm x 77” (195.5cm)
AxS3978 BULK
39mm x 78” (198cm)
AxS3979 BULK
39mm x 79” (201cm)
Straight Beam Axles - Black Finish
Galvanised Finish
Ax
LES
& A
CC
ES
SO
RIE
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
102
Straight Beam Axles - Black Finish (40mm)
Galvanised Finish (40mm)
40mm square solid steel. Suits LM bearings. Carrying capacity 1000kg.All axles supplied complete with slotted nuts, split pins and washers.
PART NO: PACK TyPE:
AxS4065 BULK
Axle 40mm x 65” (165cm)
PART NO: PACK TyPE:
AxS4075 BULK
Axle 40mm x 75” (190.5cm)
PART NO: PACK TyPE:
AxS4068G BULK
Axle 40mm x 68” (173cm)
PART NO: PACK TyPE:
AxS4077G BULK
Axle 40mm x 77” (195.5cm)
PART NO: PACK TyPE:
AxS4085G BULK
Axle 40mm x 85” (216cm)
PART NO: PACK TyPE:
AxS4083 BULK
Axle 40mm x 83” (211cm)
AxS4066 BULK
Axle 40mm x 66” (167.5cm)
AxS4076 BULK
Axle 40mm x 76” (193cm)
AxS4089 BULK
Axle 40mm x 89” (226cm)
AxS4091 BULK
Axle 40mm x 91” (231cm)
AxS4095 BULK
Axle 40mm x 95” (241.5cm)
AxS4096 BULK
Axle 40mm x 96” (244cm)
AxS4097 BULK
Axle 40mm x 97” (246.5cm)
AxS4077 BULK
Axle 40mm x 77” (195.5cm)
AxS4078 BULK
Axle 40mm x 78” (198cm)
AxS4079 BULK
Axle 40mm x 79” (201cm)
AxS4080 BULK
Axle 40mm x 80” (203cm)
AxS4081 BULK
Axle 40mm x 81” (206cm)
AxS4067 BULK
Axle 40mm x 67” (170cm)
AxS4068 BULK
Axle 40mm x 68” (173cm)
AxS4070 BULK
Axle 40mm x 70” (178cm)
AxS4071 BULK
Axle 40mm x 71” (180.5cm)
AxS4073 BULK
Axle 40mm x 73” (185.5cm)
AxS4071G BULK
Axle 40mm x 71” (180.5cm)
AxS4073G BULK
Axle 40mm x 73” (185.4cm)
AxS4079G BULK
Axle 40mm x 79” (201cm)
AxS4089G BULK
Axle 40mm x 89” (226cm)
AxS4095G BULK
Axle 40mm x 95” (241.3cm)
AxS4080G BULK
Axle 40mm x 80” (203cm)
AxS4075G BULK
Axle 40mm x 75” (190.5cm)
Ax
LES
& A
CC
ES
SO
RIE
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
103
PART NO: PACK TyPE:
AxS4561 BULK
Axle 45mm x 61” (155cm)
PART NO: PACK TyPE:
AxS4580G BULK
Axle 45mm x 80” (203cm)
AxS4585G BULK
Axle 45mm x 85” (216cm)
AxS4575 BULK
Axle 45mm x 75” (190.5cm)
PART NO: PACK TyPE:
AxS4585 BULK
Axle 45mm x 85” (216cm)
AxS4565 BULK
Axle 45mm x 65” (165cm)
AxS4564 BULK
Axle 45mm x 64” (162.5cm)
AxS4576 BULK
Axle 45mm x 76” (193cm)
AxS4589 BULK
Axle 45mm x 89” (226cm)
AxS4590 BULK
Axle 45mm x 90” (229cm)
AxS4593 BULK
Axle 45mm x 93” (236cm)
AxS4597 BULK
Axle 45mm x 97” (246.5cm)
AxS4591 BULK
Axle 45mm x 91” (231cm)
AxS4577 BULK
Axle 45mm x 77” (195.5cm)
AxS4578 BULK
Axle 45mm x 78” (198cm)
AxS4579 BULK
Axle 45mm x 79” (201cm)
AxS4566 BULK
Axle 45mm x 66” (167.5cm)
AxS4567 BULK
Axle 45mm x 67” (170cm)
AxS4571 BULK
Axle 45mm x 71” (180.5cm)
PART NO: PACK TyPE:
AxS4572 BULK
Axle 45mm x 72” (183cm)
AxS4581G BULK
Axle 45mm x 81” (206cm)
PART NO: PACK TyPE:
AxS4589G BULK
Axle 45mm x 89” (226cm)
AxS4591G BULK
Axle 45mm x 91” (231cm)
45mm square solid steel. Suits slimline bearings. Carrying capacity 1500kg. All axles supplied complete with slotted nuts, split pins and washers.
Straight Beam Axles - Black Finish (45mm)
Galvanised Finish (45mm)
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Ax
LES
& A
CC
ES
SO
RIE
ST
RA
ILER
S
104
39mm Round
•Suits LM Holden bearings
•Carrying capacity per pair 750kg
•All stub axles supplied completewith slotted nuts, split pins and washers.
40mm Square
•Suits LM Holden bearings
•Carrying capacity per pair 1000kg
•All stub axles supplied complete with slottednuts, split pins and washers.
45mm Square
•Suits slimline Ford bearings
•Carrying capacity per pair 1500kg
•All stub axles supplied complete with slottednuts, split pins and washers.
PART NO: PACK TyPE:
SAx398 BULK
Stub Axle 39mm x 8” (20.5cm)
AN34 BULK
Axle Slotted Nut3/4” UNF, - zinc plated
PART NO: PACK TyPE:
ANPW34B BLISTER
Axle Slotted Nuts, Split Pins & WashersSet of 2. Zinc plated.
PART NO: PACK TyPE:
SAx409 BULK
Stub Axle 40mm x 9” (23cm)
PART NO: PACK TyPE:
SAx459 BULK
Stub Axle 45mm x 9” (23cm)
SAx399 BULK
Stub Axle 39mm x 9” (23cm)
SAx4010 BULK
Stub Axle 40mm x 10” (25.5cm)
SAx4510 BULK
Stub Axle 45mm x 10” (25.5cm)
SAx4512 BULK
Stub Axle 45mm x 12” (30.5cm)
SAx4012 BULK
Stub Axle 40mm x 12” (30.5cm)
SAx3910 BULK
Stub Axle 39mm x 10” (25.5cm)
SAx3912 BULK
Stub Axle 39mm x 12” (30.5cm)
ASP34 BULK
Axle Split Pin4mm x 32mm
AW34 BULK
Axle washer 3/4”
Stub Axles - Black Finish
Axle Nuts, Washers and Split Pins
Ax
LES
& A
CC
ES
SO
RIE
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
105
PART NO: PACK TyPE: FINISH:
UB40 BULK BLACK
UB40G BULK GALvANISED
UB40GB BLISTER (SET OF 2) GALvANISED
U-bolt 40mm x 130mmSuits 40mm square axle with 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
UB39 BULK BLACK
UB39G BULK GALvANISED
UB39GB BLISTER (SET OF 2) GALvANISED
U-bolt 39mm x 120mmSuits 39mm round axle with 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
UB45 BULK BLACK
UB45G BULK GALvANISED
UB45GB BLISTER (SET OF 2) GALvANISED
U-bolt 45mm x 140mmSuits 45mm square axle with 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
UB4515 BULK BLACK
U-Bolt 45mm x 160mm Heavy DutySuits 45mm square axle with 60mm wide leaf spring.
PART NO: PACK TyPE: FINISH:
UB39SG BULK GALvANISED
U-bolt 39mm x 100mmSuits 39mm round axle with 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
UB5015 BULK BLACK
U-Bolt 50mm x 160mm Heavy DutySuits 50mm square axle with 60mm wide leaf spring.
Axle U-bolts39mm
60mm
120mm
1/2”
39mm
60mm
100mm
1/2”
40mm
60mm
130mm
1/2”
45mm
60mm
140mm
1/2”
45mm
80mm
160mm
5/8”
50mm
80mm
160mm
5/8”
Ax
LES
& A
CC
ES
SO
RIE
ST
RA
ILER
S
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
106
F
E
A
C
GØ B
D
EØA
B
D
C
735.0 To front end
960
824 824
To front end
Shackle Spring Setup
Tandem Spring Setup A
SP
RIN
GS
& A
CC
ES
SO
RIE
S Springs: How to Measure Trailer Leaf SpringsArk Corporation carries a wide range of leaf springs and accessories. Our leaf spring range comprises of slipper springs and shackle springs with various ratings, either in black painted or galvanised finish.
When fitting new or replacing your existing springs, it is vital to consider your trailers GVM (Gross Vehicle Mass) which is the maximum weight of the trailer including its load. Fitting the incorrect springs to your trailer can lead to overloading, sagging, poor vehicle handling, stress and fatigue to the spring steel which can lead to metal failure and potential fatal consequences on the road, so getting it right is vital!
Once you have your trailers GVM you can determine whether you need to run a single, dual or tri axle setup to accommodate the load. To work out your capacities for dual or tri-axle setup, simply divide the GVM over the amount of axles.
you need to start off by matching your existing spring i.e shackle spring (eye-eye) or slipper spring (eye-slipper). Once you have matched your spring type, the next few points need to be considered:
• Number of leaves, each layer of spring metal is considered a leaf.• Thickness of leaves.• Inside diameter of the bushing, our slipper springs use a ½” bush while the shackle springs
use a 9/16” bush.• Length of spring – Measure from the centre of the front bushing in a straight line to the centre of the
rear bushing for shackle springs or measure from the centre of front bushing in a straight line to the end of spring for slipper springs.
• Spring camber – Rest the spring on the floor upside down, measure the distance between the floor and the centre spring bolt.
• For dual and tri-axle setups, you need to determine your axle spacing to accommodate your wheel sizes. Once this is determined you can work out your spring centres to determine whether you need to utilise centre or off-centre spring bolts or a combination of the two.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
107
SP
RIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
Springs: Specifications and assemblies
Axle and Spring SetupAxle
U-bolt
Spring
Fish plate
Nyloc nuts
Axle pad / spring pad (welded)
825 830
970
Tandem Spring Setup B
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
108
Black finish. 45mm x 8mm with 9/16” Nylon bush.
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) “F” (MM) “G” (MM) PACK TyPE:
SEE616 711 121 355 355 45 8 15 BULK
6 Leaf Shackle SpringCentre bolt. 1500kg - rated capacity per pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) “F” (MM) “G” (MM) PACK TyPE:
SEE516 711 121 355 355 45 8 15 BULK
5 Leaf Shackle SpringCentre bolt. 1300kg - rated capacity per pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) “F” (MM) “G” (MM) PACK TyPE:
SEEO616 711 121 305 405 45 8 15 BULK
6 Leaf Shackle Spring50mm offset bolt. 1500kg - rated capacity per pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) “F” (MM) “G” (MM) PACK TyPE:
SEEO516 711 121 305 405 45 8 15 BULK
5 Leaf Shackle Spring50mm offset bolt. 1300kg - rated capacity per pair
Shackle Leaf SpringsS
PR
ING
S &
AC
CE
SS
OR
IES
TR
AIL
ER
S
F
E
A
C
GØ B
D
EØA
B
D
C
735.0 To front end
960
824 824
To front end
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
109
Slipper Leaf Springs
Black finish.45mm x 6mm with 1/2” Nylon bush.
Galvanised finish.45mm x 6mm with 1/2” Nylon bush.
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) PACK TyPE:
SS313 770 150 45 6 13 BULK
SS313G 770 150 45 6 13 BULK
3 Leaf - 600kg Rating Capacity per Pair.
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) PACK TyPE:
SS413 770 150 45 6 13 BULK
SS413G 770 150 45 6 13 BULK
4 Leaf - 900kg Rating Capacity per Pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) PACK TyPE:
SS513 770 150 45 6 13 BULK
SS513G 770 150 45 6 13 BULK
5 Leaf - 1000kg Rating Capacity per Pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) PACK TyPE:
SS613 770 150 45 6 13 BULK
SS613G 770 150 45 6 13 BULK
6 Leaf - 1200kg Rating Capacity per Pair
PART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) PACK TyPE:
SS713 770 150 45 6 13 BULK
SS713G 770 150 45 6 13 BULK
7 Leaf - 1350kg Rating Capacity per Pair.
F
E
A
C
GØ B
D
EØA
B
D
C
735.0 To front end
960
824 824
To front endV I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
SP
RIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
110
SP
RIN
GS
& A
CC
ES
SO
RIE
S Tandem Spring Kits
PART NO: PACK TyPE:
TRKA45 BULK
Tandem Setup with Rocker Arm ‘Type A’
Kit consists of:
• 4 x Shackle hanger (SHF45)• 8 x Shackle plate (SP64)• 2 x Tandem rocker hanger (TRH45)• 2 x Tandem rocker arm (RA45)
• 12 x Shackle pin 9/16” x 3 1/2” (SP916)• 2 x Shackle pin 5/8” x 3 1/2” (SP58G)• 4 x Spring rocker bush (SB916)
PART NO: PACK TyPE:
TRKB45 BULK
Tandem Setup with Rocker Arm ‘Type B’
Kit consists of:
• 2 x Shackle hanger (SHFD45)• 8 x Shackle plate (SP64)• 2 x Tandem rocker hanger (TRH45)• 2 x Tandem rocker arm (RAI45)• 4 x Spring rocker bush (SB916)
• 2 x Rear rocker hanger (SHR45)• 12 x Shackle pin 9/16” x 3 1/2” (SP916)• 2 x Shackle pin (SP58G)• 4 x 5 Leaf shackle spring (SEE516)
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
S
For more info on TRH45, see page 112
For more info on SHF45, see page 111
For more info on SHFD45, see page 111
For more info on TRH45, see page 112
For more info on SP58G, see page 113
For more info on SP58G, see page 113
For more info on RA45, see page 112
For more info on RAI45, see page 112
For more info on SB916, see page 113
For more info on SHR45, see page 111
For more info on SP916, see page 113
For more info on SP916, see page 113
For more info on SP64, see page 112
For more info on SP64, see page 112
For more info on SB916, see page 113
Ark’s tandem rocker kits are designed to transfer the load and evenly distribute the weight over the trailer’s axle and suspension system.
The tandem rocker kits are modular, meaning you order the kit as per required rocker system then order the shackle springs in either centre bolt, offset bolt or a combination of the two based on axle spacing and wheel sizes.
111
SP
RIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
Slipper Spring Hangers
PART NO: PACK TyPE: FINISH:
FSH45 BULK PLAIN
Front Spring Hanger Suits 45mm slipper leaf spring and suits 1/2” bolt.
PART NO: PACK TyPE:
SHF45 BULK
Front Shackle HangerSuits 45mm shackle springs 9/16” bolt holes
PART NO: PACK TyPE:
SHFD45 BULK
Deep Front Shackle HangerSuits 45mm shackle springs 9/16” bolt holes
PART NO: PACK TyPE: FINISH:
RSH45 BULK PLAIN
Rear Spring Hanger Suits 45mm slipper leaf spring.
PART NO: PACK TyPE: FINISH:
SHK45GB BLISTER GALvANISED
Spring Hanger KitGalvanised front and rear spring hangers with 1/2” x 3 1/2” bolt and nyloc nut suits 45mm slipper leaf spring.
Shackle Spring Hangers
PART NO: PACK TyPE:
SHR45 BULK
Rear Shackle HangerDeadeye to suit 45mm shackle springs
40mm
55mm
13mmØ 47mm
36mm
40mm
55mm
15mmØ 47mm
36mm
40mm
90mm
15mmØ 48mm
73mm
50mm
63mm
22mmØ 29mm
37mm
40mm
50mm
47mm
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
112
PART NO: PACK TyPE:
RA45 BULK
Tandem Rocker ArmType “A”. Suits 45mm shackle spring
PART NO: PACK TyPE:
TRH45 BULK
Tandem Rocker HangerSuits 45mm rocker arms
PART NO: PACK TyPE:
RAI45 BULK
Tandem Rocker ArmType “B”. Suits 45mm shackle spring
Tandem Rocker Arms
Tandem Rocker Hanger
PART NO: “A” (MM)
“B” (MM)
“C” (MM)
“D” (MM)
PACK TyPE:
SP64 103 40 8 64 BULK
Shackle Plate9/16” Bolt holes with 64mm centres
PART NO: “A” (MM)
“B” (MM)
“C” (MM)
“D” (MM)
PACK TyPE:
SP75 120 40 8 75 BULK
Shackle Plate9/16” Bolt holes with 75mm centres
Shackle Plates
A
B C
D
Spring PadsPART NO: PACK TyPE: FINISH:
SP45 BULK BLACK
Spring Pad 40mm x 40mm. Suitable for 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
SP45GB BLISTER GALvANISED
Galvanised Spring Pads 40mm x 40mm, set of 2.
PART NO: PACK TyPE: FINISH:
SP45G BULK GALvANISED
Galvanised Spring Pad 40mm x 40mm. Suitable for 45mm wide leaf springs.
PART NO: PACK TyPE: FINISH:
SP95 BULK BLACK
Spring Pad Heavy Duty95mm x 50mm. Suitable for 60mm wide leaf springs. PART NO: “A” “B” “C” “D”
SP45 40 40 7 16
SP45G 40 40 7 16
SP45GB 40 40 7 16
SP95 95 50 8 16
A
B
C
øD
SP
RIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
113
Shackle Pins and BoltsPART NO: PACK TyPE:
SP916 BULK
SP916B BLISTER
SP916G GREASABLE - BULK
SP916GB GREASABLE - BLISTER
Shackle Pin 9/16” x 3 1/2”Comes with nyloc nut.
PART NO: PACK TyPE:
SP58 BULK
SP58B BLISTER
SP58G GREASABLE - BULK
SP58GB GREASABLE - BLISTER
Shackle Pin 5/8” x 3 1/2”Comes with nyloc nut.
PART NO: PACK TyPE:
BT1235 BULK
BT1235zB BLISTER
Shackle Bolt 1/2” x 3 1/2”Comes with nyloc nut, zinc plated
Fish PlatesPART NO: “A” (MM) “B” (MM) “C” (MM) “D” (MM) “E” (MM) “F” (MM) “G” (MM) PACK TyPE: FINISH:
FP3950 95 90 7 45 39 20 16 BULK BLACK
FP3950G 95 90 7 45 39 20 16 BULK GALvANISED
FP3950GB 95 90 7 45 39 20 16 BLISTER GALvANISED
Fish PlateSuits U bolts from 39mm to 50mm with 45mm wide leaf spring.
FP4550 100 110 10 60 45 20 18 BULK BLACK
Fish Plate Heavy DutySuits heavy duty U-bolts from 45mm to 50mm with 60mm wide leaf spring.
F E
A
D
C
B
øG
Spring Bush
PART NO: PACK TyPE:
SB916 BULK
SB916B BLISTER
Spring Rocker Bush 9/16” x 7/8” x 45mm
PART NO: PACK TyPE:
SB58 BULK
SB58B BLISTER
Spring Rocker Bush 5/8” x 7/8” x 45mm
PART NO: PACK TyPE:
SB12 BULK
SB12B BLISTER
Spring Rocker Bush 1/2” x 7/8” x 45mm
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
SP
RIN
GS
& A
CC
ES
SO
RIE
ST
RA
ILER
S
114
Trailer Tailgate AccessoriesPART NO: PACK TyPE:
TGC60L BULK
Trailer Tailgate CatchesLeft side, plain finish
TGC60R BULK
Trailer Tailgate CatchesRight side, plain finish
PART NO: PACK TyPE:
TGAB70 BULK
Tailgate Anti-rattle LatchesBolt type, comes with nyloc nut, plain finish
PART NO: PACK TyPE:
TGC60B BLISTER
Trailer Tailgate CatchesRight and left sides, zinc plated.
PART NO: PACK TyPE:
GC15z BULK
Gate CatcherZinc plated.
PART NO: PACK TyPE:
TGH100 BULK
Tailgate Hinge20mm diameter x 100mm in length, plain finish
PART NO: PACK TyPE:
TGH100B BLISTER
Tailgate Hinges20mm in diameter x 100mm in length, set of 2, zinc plated.
PART NO: PACK TyPE:
TGAB19 BULK
Tailgate Anti-rattle LatchesBolt type, comes with nyloc nut,plain finish.
PART NO: PACK TyPE:
TGAB19B BLISTER
Tailgate Anti-rattle LatchesBolt type, comes with nyloc nut, set of 2, zinc finish.
PART NO: PACK TyPE:
TGAW19 BULK
Tailgate Anti-rattle LatchWeld type, plain finish.
PART NO: PACK TyPE:
TGH50 BULK
Tailgate Hinge3mm diameter x 60mm in length, plain finish.
PART NO: PACK TyPE:
TGAW19B BLISTER
Tailgate Anti-rattle LatchesWeld type, set of 2, zinc plated.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
TR
AIL
ER
TA
ILG
AT
E A
CC
ES
SO
RIE
S
PART NO: PACK TyPE:
A86A BULK
A86AB BLISTER
Trailer Tailgate LatchOver center adjustable latch with padlock facility. Coated handle for comfort grip.
TR
AIL
ER
S
115
Prop Cover
Outboard Motor Flushers
PART NO: PACK TyPE:
PC400B BLISTER
Outboard Prop Safety CoverAids visibility for drivers and pedestrians. Warning LED lamp for night visibility. Fluorescent fabric with reflector stripe fits most outboard propellers securely. Measures 400mm x 400mm.
PART NO: PACK TyPE:
OMF95B BLISTER
Outboard Motor FlusherSmall round universal earmuff flusher. 95mm diameter cups.
PART NO: PACK TyPE:
OMF110B BLISTER
Outboard Motor FlusherOval universal earmuff flusher. Universal fit. 85mm x 110mm cups.
PART NO: PACK TyPE:
OMF125B BLISTER
Outboard Motor FlusherRectangular universal earmuff flusher. Universal fit. 80mm x 125mm cups.
BO
AT
ING
AC
CE
SS
OR
IES
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Outboard Motor Locks
PART NO: PACK TyPE:
OML225B BLISTER
Outboard Motor LockStainless steel lock and tube, suits medium to large outboard motors, simple and easy to use, two keys included.
255MM
225MM
35MM 38MM14MM
PART NO: PACK TyPE:
OML170B BLISTER
Outboard Motor LockStainless steel lock and tube, suits small to medium outboard motors, simple and easy to use, two keys included.
200MM
170MM
35MM 38MM12MM
• STAINLESS STEEL LOCK AND TUBE
• SUITS SMALL TO MEDIUM OUTBOARD MOTORS
• SIMPLE AND EASY TO USE
• TWO KEYS INCLUDED
• FOR DIMENSIONS, REFER TO THE BACK
• STAINLESS STEEL LOCK AND TUBE
• SUITS SMALL TO MEDIUM OUTBOARD MOTORS
• SIMPLE AND EASY TO USE
• TWO KEYS INCLUDED
• FOR DIMENSIONS, REFER TO THE BACK
TR
AILE
RS
116
PART NO: PACK TyPE:
5411 BULK
4” Smooth Wobble Roller Blue Poly
PART NO: PACK TyPE:
2211 BULK
4” Keel Roller Blue Hard Poly102mm width.
PART NO: PACK TyPE:
2231 BULK
6” Keel Roller Blue Hard Poly152mm width.
PART NO: PACK TyPE:
2241 BULK
8” Keel Roller Blue Hard Poly203mm width.
PART NO: PACK TyPE:
2221 BULK
4 1/2” Keel Roller Blue Hard Poly114mm width.
PART NO: PACK TyPE:
5431 BULK
4” Smooth Wobble Roller Black Poly
102mm diameter x 90mm width. Suitable for brackets with 18mm spindle. Ideal for all boat types. UV stable polyurethane, non-marking.
17mm bore size. For use with 16mm spindle. Suitable for Alloy boats. UV stable Polypropylene. Non-marking.
Wobble Rollers (Suitable for all boat types)
Nylon Rollers - Hard (Suitable for alloy boats)
BO
AT
RO
LLE
RS
& B
RA
CK
ET
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
117
BO
AT
RO
LLER
S &
BR
AC
KE
TS
TR
AILE
RS
Rubber Rollers (Suitable for fibreglass boats)
PART NO: PACK TyPE:
1221 BULK
4 1/2” Keel Roller Black Rubber114mm width.
PART NO: PACK TyPE:
1241 BULK
8” Keel Roller Black Rubber203mm width.
PART NO: PACK TyPE:
1301 BULK
6” Sydney Roller Black Rubber152mm width.
PART NO: PACK TyPE:
1251 BULK
4 1/2” Blige Roller Black Rubber114mm width.
PART NO: PACK TyPE:
1231 BULK
6” Keel Roller Black Rubber152mm width.
17mm bore size. For use with 16mm spindle. Suitable for fiberglass boats. UV stable.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
118
Poly Soft Rollers (Suitable for fibreglass boats)
PART NO: PACK TyPE:
3231 BULK
6” Keel Roller Red Soft Poly152mm width.
PART NO: PACK TyPE:
3236 BULK
6” Self-centering Roller Red Soft Poly152mm width.
PART NO: PACK TyPE:
3241 BULK
8” Keel Roller Red Soft Poly203mm width.
PART NO: PACK TyPE:
3233 BULK
6” Sydney Roller Red Soft Poly152mm width.
PART NO: PACK TyPE:
3221 BULK
4 1/2” Keel Roller Red Soft Poly114mm width.
PART NO: PACK TyPE:
3211 BULK
4” Keel Roller Red Soft Poly102mm width.
17mm bore size. For use with 16mm spindle. Suitable for fibreglass boats. UV stable Polyurethane. Non-marking.
PART NO: PACK TyPE:
3246 BULK
8” Self-centering Red Poly Soft Roller203mm width, 17mm bore size, for use with 16mm spindle, suitable for fibreglass boats, UV stable Polyurethane, non-marking.
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
BO
AT
RO
LLE
RS
& B
RA
CK
ET
ST
RA
ILE
RS
119
V Blocks
Skid Moulds
Blue Trailer Strip
Trailer Blocks
PART NO: PACK TyPE:
91725 BULK
Skid Mould30cm Blue skid mould
PART NO: PACK TyPE:
5510 BULK
Trailer Strip1.5m Blue trailer strip
PART NO: PACK TyPE:
91711 BULK
Trailer BlockBlue trailer block, 30cm in length
91712 BULK
Trailer BlockBlue trailer block, 1.5m in length
PART NO: PACK TyPE:
5540 BULK
4” v-block Black Rubber100mm base, suitable for all boat types, UV stable rubber.
PART NO: PACK TyPE:
5548 BULK
4” v-block Red Soft Poly90mm base, suitable for all boat types, UV stable polyurethane, non-marking.
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
BO
AT
RO
LLER
S &
BR
AC
KE
TS
TR
AILE
RS
120
Roller Spindles
Wood yoke Stem (complete with bolt and nut)
Roller Assemblies
PART NO: PACK TyPE:
6191 BULK
145mm x 16mm Roller SpindleZinc plated, suits 4 1/2” flat bracket.
PART NO: PACK TyPE:
91801 BULK
6” Wood Yoke - Straight
PART NO: PACK TyPE:
6222 BULK
4 1/2” Keel Assy - Flat BracketRubber material
PART NO: PACK TyPE:
6230 BULK
4 1/2” Keel Roller Assy - Stem BracketRubber material
PART NO: PACK TyPE:
6212 BULK
Twin L/D Wobble Assy18mm, 20mm bore
PART NO: PACK TyPE:
6193 BULK
235mm x 16mm Roller SpindleZinc plated, suits 8” flat bracket.
PART NO: PACK TyPE:
6192 BULK
203mm x 16mm Roller SpindleZinc plated, suits 6” flat bracket.
PART NO: PACK TyPE:
6150 BULK
8” Wood Yoke - Straight
20mm Stem size. Galvanised finish.
PART NO: PACK TyPE:
6151 BULK
8” Wood Yoke - Angled
BO
AT
RO
LLE
RS
& B
RA
CK
ET
ST
RA
ILE
RS
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
121
BO
AT
RO
LLER
S &
BR
AC
KE
TS
TR
AILE
RS
Boat Rollers Brackets
PART NO: PACK TyPE:
6120 BULK
4” Flat Bracket16mm bore, galvanised finish.
PART NO: PACK TyPE:
6128 BULK
4” Stem Bracket6” x 20mm square, galvanised finish.
PART NO: PACK TyPE:
6132 BULK
6” Stem Bracket6” x 20mm square, galvanised finish.
PART NO: PACK TyPE:
92056 BULK
6” Adjustable Twin Stem Bracket
PART NO: PACK TyPE:
6122 BULK
4 1/2” Flat Bracket16mm bore, galvanised finish.
PART NO: PACK TyPE:
6123 BULK
6” Flat Bracket16mm bore, galvanised finish.
PART NO: PACK TyPE:
6124 BULK
8” Flat Bracket16mm bore, galvanised finish.
PART NO: PACK TyPE:
6130 BULK
4 1/2” Stem Bracket6” x 18mm square, galvanised finish.
PART NO: PACK TyPE:
6138 BULK
8” Flat Twin Stem Bracket6” x 20mm square, galvanised finish.
PART NO: PACK TyPE:
92052 BULK
8” Stem Bracket6” x 20mm square, galvanised finish.
PART NO: PACK TyPE:
92054 BULK
12” Adjustable Twin Stem Bracket
PART NO: PACK TyPE:
6110 BULK
Single Wobble Bracket18mm, galvanised finish.
PART NO: PACK TyPE: BORE SIZE:
92080 BULK 20MM
6114 BULK 22MM
Double Wobble Roller BracketBig clamp, galvanised finish
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
122
Weld-on and bolt-on Bracket
Eye Post
Motor Support
Tube Side Adjusters (Complete with bolt and nut)
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
PART NO: PACK TyPE:
6152 BULK
3” Weld-on inc Bolt75mm length, zinc plated.
PART NO: PACK TyPE:
6154 BULK
3” Bolt-on Bracket inc Bolt75mm length, galvanised finish.
PART NO: PACK TyPE:
92171 BULK
6” Eye PostSuits 16mm pin, galvanised finish.
PART NO: PACK TyPE:
92151 BULK
2” x 2” Tube Side Adjuster50mm x 50mm, galvanised finish.
PART NO: PACK TyPE:
6196 BULK
8” Eye PostSuits 16mm pin, galvanised finish.
PART NO: PACK TyPE:
92150 BULK
2” x 1” Tube Side Adjuster50mm x 25mm, galvanised finish.
PART NO: PACK TyPE:
6202 BULK
Motor Support Bracket
BO
AT
RO
LLE
RS
& B
RA
CK
ET
ST
RA
ILE
RS
123
MA
RIN
E U
-BO
LTS
Winch Support U-bolts
Main Rail U-bolts
PART NO: PACK TyPE: FINISH:
UB23G BULK GALvANISED
U-bolt 50mm x 100mmSuits 50mm x 75mm winch post. Set of 2.
PART NO: PACK TyPE: FINISH:
UB24G BULK GALvANISED
U-bolt 50mm x 125mmSuits 50mm x 100mm winch post. Set of 2.
PART NO: PACK TyPE: FINISH:
UB44G BULK GALvANISED
U-bolt 100mm x 125mmSuits 100mm x 100mm winch post & drawbars. Set of 2.
PART NO: PACK TyPE: FINISH:
MRUB2G BULK GALvANISED
U-Bolt 60mm x 80mmSuits 50mm x 50mm main rails for boat trailers. Set of 2.
PART NO: PACK TyPE: FINISH:
MRUB3G BULK GALvANISED
U-Bolt 60mm x 110mmSuits 50mm x 75mm main rails for boat trailers. Set of 2.
PART NO: PACK TyPE: FINISH:
MRUB4G BULK GALvANISED
U-Bolt 60mm x 135mmSuits 50mm x 100mm main rails for boat trailers. Set of 2.
50mm1/2”
50mm
100mm
60mm1/2”
50mm
80mm
60mm1/2”
50mm
110mm
60mm1/2”
50mm
135mm
50mm1/2”
40mm
125mm
100mm1/2”
50mm
125mm
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
TR
AILE
RS
124
BIK
E C
AR
RIE
RS
TR
AIL
ER
S
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
Bike Carriers
PART NO: PACK TyPE:
BRBT3D BULK
Ark Classic PlusCarriers up to 3 bikes, ball mount type. Designed to tilt by simply pulling the easy to reach latch handle. Convenient key lock to secure your bikes. 60kg load rating.
1
2
98
7
3
6
4
5
1
2
3
4
5
6
7
8 9
1. ADR approved licence plate lamp
2. Licence plate holder
3. Tilt latch handle
4. Keyed lock bulb
5. Soft pad clamps prevent scratching
6. Durable, powdercoated finish
7. Bike protection pad
8. Ball mount type
9. Pre-wired to 7 pin flat plug
PART NO: PACK TyPE:
BRB3D BULK
Ark ClassicCarriers up to 3 bikes, ball mount type. Convenient key lock to secure your bikes. Ready mounted ADR approved licence plate lamp, pre-wired to 7 pin flat plug. 60kg load rating.
1. ADR approved licence plate lamp
2. Licence plate holder
3. Keyed lock bulb
4. Soft pad clamps prevent scratching
5. Durable, powdercoated finish
6. Bike protection pad
7. Ball mount type
8. Pre-wired to 7 pin flat plug
1. Adjustable flexible bike frame straps2. Adjustable clamp knob3. Heavy duty securing straps4. Rubber bumper5. Lower support leg6. Durable powder coated finish7. Quick release multi-angle clamp lever8. Upper support leg9. Soft pad protectors
1
2
3
4
5
6
7 8
PART NO: PACK TyPE:
BRBM3D DISPLAY
Booty RackFolds for easy storage, carries up to 3 bikes, weighs just 5.5kg, quick and simple to mount, suits most vehicles, 45kg load rating.
Portable Power
• ArkPak.................................................................
• Battery Boxes......................................................
• Powerpack..........................................................
Page 126 - 127
Page 129
Page 128
126
The World’s MostAdvanced Battery Box
AR
KPA
KP
OR
TAB
LE P
OW
ER
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
CaravanningCamping 4WD’ing Boating
Ideal for
127
PART NO: PACK TyPE:
APB20B BLISTER
ArkPak Mounting BracketMounts your ArkPak securely and protects it through the roughest terrain.
PART NO: PACK TyPE:
APCC60B DISPLAY CARTON
ArkPak DC-DC Car Charger AdaptorTurns your ArkPak into a portable dual battery system for your vehicle.
PART NO: PACK TyPE:
APC240 PLAIN CARTON
ArkPak 240v Charger Adaptor
AR
KPA
KP
OR
TAB
LE P
OW
ER
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
Battery Boxes
PART NO: PACK TyPE:
AP620 DISPLAY BOx
ArkPakInternal dimensions 180mm wide x 330mm long x 238mm high
31
2
4
6
78
95
1. 100 amp protected external terminals2. Power isolator switch3. Time tracker LCD screen4. Twin 12V sockets5. 6 amp, 7 stage smart charger6. 150W Inverter7. 240V Socket8. 5V USB Port9. 50 amp Anderson plug
128
The original battery boxwith built-in smart charger
6 Stage smart charger functions:
PART NO: PACK TyPE:
DA10W DISPLAY BOx
PowerpackInternal size: Length 330mm x Width 180mm x Height 240mm
Weather resistantterminal covers High current terminals
Charge cycle LED monitor
Keyed battery isolator
Battery condition LED monitor
6 stage Smart Charger
Input / output accessory port
Tough weather resistant case
Mounting brackets
Ventilation fan
*This product is protected by the following Patents/Patent Applications and Registered Designs: •Australian Innovation Patent No. 2003100766 •Australian Patent Application No. 2003258369 •Canadian Patent Application No. 2538378 •Canadian Registered Design No. 104258
•United States Patent Application no. 10/570,969 •United States Patent No. D495994 •European Registered Design No. 000076799-0001
1. ChargingRecovers a flat battery - Charges the battery until it reaches 12.5V
2. BulkingTops up battery for extra voltage to 13.8V
3. BoostingPeak charge for maximum performance. Maintains the battery voltage at 13.8V for 5 hours to boost battery capacity.
4. NormalizingAllows the battery to consolidate after boosting. Charger ceases charging to allow the battery to rest while allowing voltage to normalize at 12.8V.
5. ConditioningMaintains performance and prolongs battery life. The battery is continually monitored and the charging current is automatically adjusted to maintain battery voltage at 12.8V for a period of 500 hours.
6. Re-awakenExercising the battery and avoiding sulphation build up. After 500 hours, the charger cycle will automatically return to Step 1, maintaining the battery at peak condition.
PO
WE
RPA
CK
PO
RTA
BLE
PO
WE
R
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
Can be chargedvia solar
129
BA
TT
ER
Y B
Ox
ES
PART NO: PACK TyPE:
BB27 BULK
Standard Battery BoxInternal size: W180 x L275 x H200mm.
PART NO: PACK TyPE:
PBB32 DISPLAY CARTON
Battery Condition IndicatorAvoid being stranded with a flat battery, at the touch of a button the meter will indicate the battery condition.
Accessory SocketConvenient for all accessories such as coolers, vacuum cleaners portable lights etc. Plugs directly into battery box.
Circuit BreakerNo more replacing fuses or danger of overheating wires, the accessory socket is connected to 10amp - circuit breaker that cuts out when overloaded and reset by pressing a button.
External TerminalsNo tools required for connecting or disconnecting terminals for safety and to prevent power leak when not in use. Useful for easily charging the battery. Solid brass terminal posts.
Battery BoxMade from impact resistant Polypropylene, ideal for keeping the areas clean from messy battery residue.
Carrying HandleDesigned for easy carrying with one hand and prevents contact with battery acid residue.
Adjustable StrapFor use when carrying or securing battery box in a fixed position with mounting brackets and stainless steel screws provided.
PART NO: PACK TyPE:
BATSTRAP BULK
Battery Box Strap
Internal Size
Length Width Height
325mm 185mm 185mm
BB32 BULK
Large Battery BoxInternal size: W185 x L325 x H200mm.
Comes with webbing tie down strap, screws and securing brackets.
Power Battery Box
PART NO: PACK TyPE:
TBAC-48 PLAIN CARTON
Replacement 240v Powerpack Charger / Adaptor
PO
RTA
BLE
PO
WE
R
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
PO
S M
ER
CH
AN
DIS
ING
MA
TE
RIA
L
130
PART NO: PACK TyPE: SIZE:
MS189 DISPLAY 1800MMx900MM
Merchandise StandArk can tailor a package to suit your needs
PART NO: PACK TyPE: SIZE:
CS123 DISPLAY 1200MMx 300MM
Corflute (header) SignLandscape orientation
POS Merchandising Material
A R K C O R P O R AT I O N • P R O D U C T C ATA L O G U E
PART NO: PACK TyPE: SIZE:
APPA1 DISPLAY 297MM x 841MM1/2 A1 Ark Parts PosterPortrait orientation
PART NO: PACK TyPE: SIZE:
APPA3 DISPLAY 297MM x 420MM
A3 Ark Parts PosterPortrait orienttation
PART NO: PACK TyPE: SIZE:
APWDA4 DISPLAY 297MM x 210MM
A4 Ark Parts Window / Door DecalLandscape orientation
PO
S M
ER
CH
AN
DIS
ING
MA
TE
RIA
L
131
POS Merchandising Material
V I S I T O U R W E B S I T E W W W. A R K C O R P. C O M . A U
PART NO: PACK TyPE:
BAP4P DISPLAY
A4 4pp ArkPak Flyer
PART NO: PACK TyPE:
APDvD DISPLAY
ArkPak Product DvD
PART NO: PACK TyPE:
BPP2P DISPLAY
A4 2pp Ark Powerpack Flyer
PART NO: PACK TyPE:
BJW8P DISPLAY
A4 8pp Ark Jockey Wheel Brochure
PART NO: PACK TyPE:
CATALOGUE DISPLAY
A4 Product Catalogue2013 - 2014 Issue
PART NO: PACK TyPE:
AUSB2 DISPLAY
Ark USB Charger
Distributed by:
Tel: (02) 9678 9036Fax: (02) 9678 9011Email: [email protected]
Ark Corporation Pty Ltd8 Smoothy PlaceArndell Park NSW 2148
www.arkcorp.com.au
Ark is an Australian Packaging Covenant signatory.
Ark is honored to have made a voluntary commitment to sustainable design, use and recovery of packaging. By reducing the environmental impacts of consumer packaging by encouraging improvements in packaging design, higher recycling rates and better stewardship of packaging, Ark hopes to make the future for customers, peers and fellow signatories greener and continually more sustainable.
For more information on the Australian Packaging Covenant, visit: www.packagingcovenant.org.au