2012 - Kart parts | Go kart parts online | Go Kart supplies

2012

Aim Sports, Inc. A.R.C.

Autolite Bondhus

Bridgestone Tires Briggs & Stratton

Bully Clutches Burris Racing

CCVI Bearings Central High Performance

Coleman Race Products Cool Power

CV Products Denso Spark Plugs

Douglas Wheel Technologies Ducar Clone Engine & Parts

Dunlop Tires Dyno Cams

EK Chain

Fel-Pro Racing FHS Supply, Inc Firestone Tires

G-Man Kartworks Horstman Manufacturing

ISC Racer Tape J.R. Racecar

Klotz Lubricants Kluhsman Racing Leaf Neck Collars

Leatherneck Products Longacre

Martin Custom Products Max-Torque Clutches

Maxxis Tires

Mikuni Fuel Pumps Nor-Am Clutches Outerwear Performance Manufacturing Premier Clutches Pro-Blend Products R2C Air Filters Racewear Kart Apparel Rage Karts R.L.V. Robertson Torque Tubes Shadow Karts Tillotson Carbs Track-Tac Products Tri-Flow Vega Tires Walbro Fuel Pumps Williams Racing Products

Kart Parts Depot Pay Less...Race More

Toll Free: 888-575-2132 www.kartpartsdepot.com

mikentosh

Stamp



************************* DISCLAIMER **************************

The majority of products in this catalog are manufactured for racing use only. Each part is sold on an “as is basis”.

There is no warranty EXPRESSED or IMPLIED.

Many products do carry a limited warranty from the manufacturer and these products are subject to the approval of the

manufacturer before a replacement or credit is issued.

No warranty or representation is made as to these products ability to protect the user from injury or death. The user shall

determine the suitability of these products and assume all risks and responsibility in connection with their use. Kart/Auto racing

is a dangerous sport and the user shall assume all risk and responsibility.



-A-

AIR DENSITY GAUGE 45

AIR (TIRE) GAUGES 44

AIR FILTERS

ANIMAL R2C AIR FILTERS (1.25” I.D.) 5

ANIMAL FABRIC AIR FILTERS (1.25” I.D.) 5

ANIMAL OUTERWEAR PRE FILTER 5

ANIMAL FOAM PRE FILTERS 5

2-7/16” FABRIC AIR FILTERS 18

2-7/16” FOAM PRE FILTERS 18

2-7/16” OUTERWEAR PRE FILTERS 18

2-7/16” R2C AIR FILTERS 18

AIR FILTER ADAPTERS

CLONE O.H.V. AIR FILTER ADAPTER 17

FLAT HEAD AIR FILTER ADAPTER 11

TILLOTSON AIR FILTER ADAPTER 18

AIR FILTER ADAPTER (CARB) COVER

ANIMAL CARB COVER 4

CLONE & FLAT HEAD (2-7/16”) COVER 11

AIR FILTER CLEANER (KLOTZ) 26

ANIMAL AFTERMARKET PARTS 3 - 5

ANIMAL ENGINE & PARTS 1 - 3

ANIMAL ENGINE TOOLS 46

AXLES 32

AXLE BEARINGS 32

AXLE CASSETTES & BOLT KITS 32

AXLE KEYS 32

AXLE LOCK COLLARS 32

AXLE SNAP RINGS 32

-B-

BACK-FACING TOOLS 46

BALL DRIVER TOOLS 46

BEACON, MYCHRON 43

BEARINGS

AXLE BEARINGS 32

AXLE BEARING SHIELDS 32

FRONT HUB BEARINGS 31

SLEEVLESS BEARING (FLAT HEAD) 10

SPINDLE BEARINGS 35

BILLET COIL BRACKETS (FLAT HEAD) 11

BILLET FLYWHEELS

CLONE O.H.V. BILLET FLYWHEELS 14

BILLET LIFTERS

ANIMAL LIFTERS 4

FLAT HEAD LIFTERS 10

BILLET RODS

ANIMAL RODS, INSERTS, & BOLTS 3

CLONE O.H.V. RODS, INSERTS, & BOLTS 14

FLAT HEAD RODS, INSERTS, & BOLTS 9

BODYWORK & ACCESSORIES 38

BRAKE CLEANER 26

BRAKE FLUID 37

BRAKE LINE, NYLON 36

BRAKE LINE, STEEL BRAIDED 37

BRAKE PARTS & ACCESSORIES 37

BRAKE PEDALS 36

BRAKE ROD CLEVIS & PIN 36

BRAKE ROTOR GUARD 37

BRASS FITTING 36

BREATHER TUBE KITS

ANIMAL VENT TUBE KIT 4

FLAT HEAD VENT TUBE KIT 11

BRIDGESTONE TIRES 29

BRIGGS ENGINES

ANIMAL ENGINE & PARTS 1 - 3

ANIMAL AFTERMARKET PARTS 3 - 5

FLAT HEAD PARTS 8

FLAT HEAD AFTERMARKET PARTS 9 - 11

WORLD FORMULA ENGINE & PARTS 6 - 7

WORLD FORMULA AFTERMARKET PARTS 7

BULLER CLUTCHES & PARTS 22

-C-

CABLE TIES 36

CAMSHAFTS (DYNO CAMS)

ANIMAL CAMS 3

CLONE O.H.V. CAMS 15

FLAT HEAD CAMS 9

CARB. COVERS

ANIMAL CARB COVER 4

CLONE & FLAT HEAD (2-7/16”) COVER 11

CARB. SUPPORTS

ANIMAL CARB INTAKE SUPPORT 4

FLAT HEAD CARB SUPPORTS 11

CARB WRENCH, FLATHEAD 46

CASTER/CAMBER GAUGE 44

CASSETTES, AXLE 32

CATCH TANKS 19

CATCH TANK STRAP 19

CHAIN 34

CHAIN BREAKERS 34

CHAIN GUARDS 20

CHEST PROTECTOR 40

CHILI OIL 26

CHOKE HOLD BRACKET (CLONE O.H.V. 17

CHOKE SPRING (ANIMAL) 4

CHROMOLY PUSHRODS, CLONE O.H.V. 15

CHT SENSORS 43

CIK BODYWORK 38

CLEANERS & SPRAYS 26

CLEAR SIDE PANEL GUARD 38

CLONE O.H.V. ENGINES & PARTS 12 - 13

CLONE O.H.V. AFTERMARKET PARTS 14 - 17

CLUCTHES

BULLY CLUTCH 22

HORSTMAN CLUTCHES 24

MAX-TORQUE CLUTCHES 25

NOR-AM CLUTCHES 23

PREMIER CLUTCHES 23

CLUTCH DRIVERS (AFTERMARKET) 25

CLUTCH OIL 26

COIL BRACKETS (FLAT HEAD) 11

COLORED TAPE, ISC 39

COOL POWER OIL 26

CYLINDER SLEEVE, FLAT HEAD 9

CYLINDER STUD KIT, CLONE O.H.V. 16

-D-

DEGREE WHEEL, ANIMAL 46

DOUGLAS WHEELS 30, 31

DRILLED JETS

CLONE O.H.V. DRILLED JETS 17

FLAT HEAD DRILLED CARB JETS 11

DUNLOP TIRES 29

DRIVING JACKETS 40

-E-

E-BOX, MYCHRON 42

EGT SENSOR 43

EK CHAIN 34

ELECTRIC STARTERS 41

ELEPHANT WASH 26

EMULSION TUBE, CLONE O.H.V. 17

EQUIPMENT BAG 41

EXHAUST GASKETS (AFTERMARKET)

ANIMAL EXHAUST GASKET 4

CLONE O.H.V. EXHAUST GASKET 16

FLAT HEAD EXHAUST GASKET 10

EXHAUST HEADERS

ANIMAL HEADERS & BOLTS 5

CLONE O.H.V. HEADERS 16

FLAT HEAD HEADERS & BOLTS 10

-F-

FAIRING MOUNTING BRACKET 38

FEL-PRO GASKETS 21

FHS OIL 26

FIRESTONE TIRES 29

FLAT HEAD AFTERMARKET PARTS 9 - 11

FLAT HEAD PARTS 8

FLOAT HEIGHT GAUGE, ANIMAL 46

FLYWHEELS, BILLET

CLONE O.H.V. BILLET FLYWHEELS 14

FLYWHEEL KEYS, OFF-SET

ANIMAL & FLAT HEAD OFF-SET KEYS 20

CLONE O.H.V. OFF-SET KEYS 14

FLYWHEL PULLER, ANIMAL 46

FLYWHEEL SCREENS 20

FOAM PRE FILTERS 5, 18

FUEL FILTERS 19

FUEL JUGS 41

FUEL LINE 19

FUEL LINE CLAMPS & FITTINGS 19

FUEL PUMPS & PARTS 18

FUEL TANKS, CAPS & PETCOCKS 19

-G-

GASKETS, FEL-PRO 21

GASKETS, EXHAUST

ANIMAL EXHAUST GASKET 4

CLONE O.H.V. EXHAUST GASKET 16

FLAT HEAD EXHAUST GASKET 10

GLOVES 40

GPS MODULE, MYCHRON 42

GRAPHIC SAVERS 38

GROMMETS, SEAT 39

GUARDS, BODYWORK PANEL 38

-H-

H2O SENSOR 43

HEADER BOLTS, DRILLED

ANIMAL HEADER BOLTS 5

FLAT HEAD HEADER BOLTS 10

HEADER BRACE

ANIMAL HEADER BRACE 5

FLAT HEAD HEADER BRACE 10

HEADER, CLONE O.H.V. (“WEINER PIPE”) 16

HEADERS, EXHAUST

ANIMAL HEADERS 5

CLONE O.H.V. HEADERS 16

FLAT HEAD HEADERS 10

HEAD GASKETS, CLONE O.H.V. 16

HEADER WRAP 20

HEIM JOINTS 35

HELMET BAG 41

HELMET TEAR OFF 40

HEX WRENCHES 46

HORSTMAN CLUTCHES 24

HUBS, WHEEL 31

-I-

INDEX WASHERS, SPARK PLUG 10, 20

INSERTS (ROD)

ANIMAL ROD INSERTS 3

CLONE O.H.V. ROD INSERTS 14

FLAT HEAD ROD INSERTS 9

INTAKE HEX WRENCH, ANIMAL 46

INTAKE SUPPORT, ANIMAL 4

ISC RACER‟S TAPE 39

-J-

JACKETS 40

JET BLOCKS

ANIMAL JET BLOCK 4

CLONE O.H.V. JET BLOCK 17

FLAT HEAD JET BLOCK 11

JETS, DRILLED

CLONE O.H.V. DRILLED JETS 17

FLAT HEAD DRILLED CARB JETS 11

JET SCREWDRIVER, ANIMAL 46

. : : INDEX


Toll Free: 888-575-2132www.kartpartsdepot.com

-K-

KART COVER 41

KART STAND 41

KLOTZ LUBRICANTS 26

-L-

LIFTERS (AFTER MARKET)

ANIMAL VALVE LFTERS 4

FLAT HAD VALVE LIFTERS 10

LOCK COLLARS 32

-M-

MANIFOLDS, TILLOTSON

ANIMAL MANIFOLDS 4

CLONE O.H.V. MANIFOLDS 17

FLAT HEAD MANIFOLDS 11

MAX-TORQUE CLUTCHES 25

MAXXIS TIRES 29

MCP BRAKE PARTS & ACCESSORIES 37

MOTOR MOUNTS 21

MPH SENSOR 43

MUFFLERS

CLONE O.H.V. “WEINER” MUFFLER 16

CLONE O.H.V. (R.L.V.) MINI MUFFLER 16, 20

STD. SILENCERS (ALL ENGINES) 20

MUFFLER CLAMPS 20

MUFFLER SHIMS 20

MYCHRON 42, 43

MYCHRON MOUNTS 34

-N-

NECK COLLARS 40

NERF BAR PIN KIT 36

NOR-AM CLUTCHES 23

NUMBERS 39

NUMBER PANELS 39

-O-

OFF SET TIMING KEYS

ANIMAL & FLAT HEAD OFF-SET KEYS 20

CLONE O.H.V. OFF-SET KEYS 14

OIL (CHAIN) 26

OIL (CLUTCH) 26

OIL (ENGINE) 26

OIL (FILTER) 26

OIL (TRI-FLOW) 26

OUTERWEARS® PRE FILTERS 5, 18

OUTERWEARS® TACH BAGS 43

-P-

PANEL GUARDS 38

PEDALS 36

PEDAL GRIPS 36

PEDAL RISERS/PLATFORM 36

PISTONS

CLONE O.H.V. (HONDA) 14

FLAT HEAD (BURRIS) 9

PISTON RINGS (AFTERMARKET)

ANIMAL RINGS (BURRIS) 3

CLONE O.H.V. (HONDA) 14

FLAT HEAD RINGS (BURRIS) 9

PRE FILTERS (FOAM)

ANIMAL FOAM PRE FILTERS 5

2-7/16” FOAM PRE FILTERS 18

PRE FILTERS (OUTERWEAR)

ANIMAL OUTERWEAR PRE FILTERS 5

2-7/16” OUTERWEAR PRE FILTERS 18

PRO-BLEND TIRE PREP 27

PULSE FITTING, ALUMINUM 19

PUSHRODS, CLONE O.H.V. 15

PYROMETERS 44

-R-

RACER‟S TAPE, ISC 39

RECOIL COVER, CLONE O.H.V. 14

RESTRICTOR PLATES

ANIMAL RESTRICTOR PLATES 4

CLONE O.H.V. RESTRICTOR PLATES 17

FLAT HEAD RESTRICTOR PLATES 11

RIB VESTS, ARMADILLO 40

RINGS, PISTON (AFTERMARKET)

ANIMAL RINGS (BURRIS) 3

CLONE O.H.V. RINGS (HONDA) 14

FLAT HEAD RINGS (BURRIS) 9

ROCKER ARM, CLONE O.H.V. 15

ROCKER KIT, CLONE O.H.V. 15

RODS

ANIMAL RODS, INSERTS, & BOLTS 3

CLONE O.H.V. RODS, INSERTS, & BOLTS 14

FLAT HEAD RODS, INSERTS, & BOLTS 9

ROD ENDS 35

ROTOR GUARD 37

RPM SENSOR 43

RUB RAILS 38

-S-

SAFETY CLIPS 36

SAFETY WIRE & PLIERS 45

SCALES, ELECTRONIC 44

SCALE FIXTURE 45

SEATS 38

SEAT GROMMETS 39

SEAT STRUTS 39

SEAT UPHOLSTERY 39

SENSORS, MYCHRON 43

SIDE COVER STUD KIT, CLONE O.H.V. 16

SILENCERS

CLONE O.H.V. “WEINER” SILENCER 16

CLONE O.H.V. (R.L.V.) MINI SILENCER 16, 20

STD. SILENCERS (ALL ENGINES) 20

WORLD FORMULA SILENCER & MOUN 7

SILENCER CLAMPS 20

SILENCER SHIMS 20

SLEEVELESS MAG BEARING 10

SPARK PLUGS (AFTERMARKET)

ANIMAL SPARK PLUGS 4

CLONE O.H.V. SPARK PLUGS 16

FLAT HEAD SPARK PLUGS 10

YAMAHA KT100 SPARK PLUGS 20

SPARK PLUG INDEX WASHERS 10, 20

SPINDLE BEARINGS 35

SPINDLE NUTS 35

SPINDLES (RAGE & SHADOW) 35

SPRING, ANIMAL CHOKE 4

SPRINGS, VALVE (AFTERMARKET)

ANIMAL VALVE SPRINGS 3

CLONE O.H.V. VALVE SPRINGS 14

FLAT HEAD VALVE SPRINGS 9

SPROCKETS, AXLE 33

SPROCKET GUIDES & BOLT KITS 33

SPROCKET HUBS & BOLT KITS 33

SPROCKET RACK 33

STAGGER TAPE MEASURE 45

STAMPED ROCKER ARM, CLONE O.H.V. 15

STARTERS, ELECTRIC 41

STARTER NUTS

ANIMAL (METRIC) STARTER NUT 4

CLONE O.H.V. STARTER NUT 14

FLATHEAD (SAE) STARTER NUT 11

STEERING SHAFT SUPPORT 34

STEERING WHEELS 34

STEERING WHEELS, MYCHRON 42

STEERING WHEEL HUB 34

STOPWATCH, LONGACRE 45

STOPWATCH, MYCHRON 43

-T-

TANK STRAP 19

TANK SUPPORT (FLAT HEAD) 11

TAPE, ISC RACER‟S 39

TEAR OFF‟S, HELMET 40

THROTTLE CABLES

BARREL END THROTTLE CABLE 4,18,36

BALL END THROTTLE CABLE 18, 36

THROTLE CLEVIS (FLAT HEAD) 11

THROTTLE LINKAGE KITS KITS

ANIMAL THROTTLE LINKAGE KITS 4

CLONE O.H.V. THROTTLE LINKAGE KITS 17

FLAT HEAD THROTTLE LINKAGE KITS 11

THROTTLE PEDALS 36

THROTTLE RETURN SPRINGS (FLAT HEAD) 11

THROTLE ROD CLEVIS & PIN 36

TIE RODS 35

TILLOTSON CARBURETORS & PARTS 18

TILLOTSON FILTER ADAPTERS 18

TILLOTSON MANIFOLDS

ANIMAL MANIFOLDS 4, 18

CLONE O.H.V. MANIFOLDS 17, 18

FLAT HEAD MANIFOLDS 11, 18

TIRES 29

TIRE BALANDER 28

TIRE BAND 28

TIRE BEAD BREAKERS 28

TIRE GAUGES 44

TIRE MOUNTING LUBRICANT 28

TIRE NEEDLER 28

TIRE PREP 27

TIRE PREP APPLICATOR 28

TIRE TAPE 45

TIRE TOOLS 28

TIRE TREAD DEPTH GAUGE 45

TIRE WASH 27

TOE GAUGE, RLV 45

TOP PLATES, CLONE O.H.V. 17

TOOLS, ENGINE 46

TREAD DEPTH GAUGE 45

TRI-FLOW LUBRICANTS 26

TRICK EMULSION TUBE, CLONE O.H.V. 17

TRUMPET END, WELD ON 20

-V-

VALVE ADJUSTMENT TOOL, ANIMAL 46

VALVE COVER w/ FITTING, CLONE O.H.V. 15

VALVE GUIDES (AFTERMARKET)

CLONE O.H.V. VALVE GUIDES 15

VALVE GUIDE PLATE, CLONE O.H.V. 15

VALVE LIFTERS (AFTERMARKET)

ANIMAL VALVE LIFTERS 4

FLAT HEAD VALVE LIFTERS 10

VALVE SPRINGS

ANIMAL VALVE SPRINGS & KEEPERS 3

CLONE O.H.V. VALVE SPRINGS 14

FLATHEAD VALVE SPRINGS & KEEPERS 9

VALVE STEM, WHEEL 31

VALVE UPGRADE KIT, CLONE O.H.V. 15

VEGA TIRES 29

VENT TUBE KITS (BREATHER)

ANIMAL VENT TUBE KIT 4

FLAT HEAD BREATHER TUBE KIT 11

-W-

WALBRO FUEL PUMPS 18

WATER SENSOR 43

WEIGHT BRACKETS 38

WEINER PIPE (CLONE O.H.V. HEADER) 16

WHEELS 30, 31

WHEEL BALANCER 28

WHEEL HUBS & BEARINGS 31

WHEEL SEALS 31

WHEEL SPACERS, FRONT 35

WHEEL WEIGHTS 31

WMS WHEELS 30

WORLD FORMULA AFTERMARKET PARTS 7

WORLD FORMULA ENGINE & PARTS 6 - 7

. : : INDEX



. : : 1

. : : BRIGGS ANIMAL ENGINE



. : : 2

. : : BRIGGS ANIMAL ENGINE

. : : BRIGGS ANIMAL PARTS

555307 690977 TAPPET - ANIMAL 555518 692591 CUP - FLYWHEEL 555520 499423 PIN - PISTON / STD 555521 691866 LOCK - PISTON PIN 555523 691890 GASKET - ROCKER COVER 555525 699485 GASKET - CRANKCASE

555526 692592 FAN - FLYWHEEL 555527 692517 BEARING - BALL 555529 692550 SEAL - OIL 555531 693517 ROD - PUSH 555532 696813 CAMSHAFT 555533 690345 SCREW - CYLINDER SHIELD 555534 691551 SCREW - CRANKCASE 555535 697551 SCREW - ROCKER COVER 7/16 555536 JET KIT - GAS / MAIN 555537 JET KIT - ALKY / MAIN 555538 690877 SCREW - CONTROL BRACKET 555539 691061 SCREW - MAGNETO 555540 691137 SCREW - CYLINDER HEAD 555541 NUT - CARBURETOR 555542 692557 SCREW - ROCKER COVER 3/8 555543 692590 SCREW - SHOULDER 555544 SCREW - CARB SPACER 555545 SPACER - CARBURETOR 555546 691230 ARM - ROCKER 555547 698214 PLATE - CYLINDER HEAD 555548 694543 ADJUSTER - ROCKER ARM 555549 694544 STUD - ROCKER ARM 555550 RETAINER - VALVE 555551 VALVE - INTAKE 555552 VALVE - EXHAUST 555553 26826 SPRING - VALVE 555554 694088 GASKET - CYLINDER HEAD PLATE 555555 691343 GUIDE - PUSH ROD 555556 691108 SCREW - CYLINDER HEAD PLATE 555563 693463 PLUG - OIL FILL TOP 555564 692599 SWITCH - ROCKER 555568 695630 WIRE - STOP GROUND 555569 692602 WIRE - STOP 555573 690824 BEARING - BALL 555574 695087 GEAR - TIMING 555575 692198 SCREW - CONTROL CVR UPPER 555576 695287 STARTER - REWIND 555577 KIT - LABEL

PART# OEM # DESCRIPTION

555578 PLUG - OIL DRAIN 555579 690959 PIN - LOCATING 555581 GASKET SET - VALVE 555584 CAMSHAFT 555585 KIT - IDLE MIXTURE 555586 KIT - IDLE SPEED

555590 VALVE - THROTTLE 555591 FLOAT - CARBURETOR 555592 GASKET - FLOAT BOWL 555593 TUBE - EMULSION 555594 JET - PILOT 555595 GASKET - THROTTLE 555596 SPRING - THROTTLE RETURN 555601 SEAL - O-RING 555602 JET - NEEDLE 555603 CAP - THROTTLE CABLE 555605 CARBURETOR KIT 555607 DRAIN - CARB BOWL 555609 691885 GASKET - INTAKE 555610 SEAL - O-RING 555613 697326 COVER - CONTROL 555614 697551 SCREW - ROCKER COVER 555623 BLOWER HOUSING (OLD STYLE) 555625 FLYWHEEL-ALUMINUM BILLET 555626 ROD - CONNECTING 555627 793100 BRACKET - CONTROL 555629 794451 SCREW - BLOWER HOUSING 555630 COVER - CRANKCASE 555631 GASKET SET - ENGINE 555635 HEAD - CYLINDER ASSY 555636 GASKET SET - VALVE 555639 JET - MAIN (BLANK) 555644 SCREW - INTAKE TO CYLINDER 555645 BUSHING - VALVE GUIDE 555646 KIT SCREW/NUT - CARB SPACER 555647 BOOT - THROTTLE CABLE 555648 VALVE - FLOAT NEEDLE 555649 SCREW/NUT - MANIFOLD 555650 RETAINER - NEEDLE VALVE 555652 SHIM - ENDPLAY 555653 BOWL - FLOAT N/S 555654 BOLT - ROD 555658 CARBURETOR - NEW 555659 DRAIN CARB BOWL

FEATURES

- Dual Ball-Bearing - Squeeze-Cast, T-7 Treated Rod - Ground Cam w/ Compression Release - High Silicon Valve Springs - PVL™ Digital Ignition System - Walbro™ Round-Slide Carb - Dana™ Fire-Ring Head Gasket

- Federal-Mogul™ Cam-Ground, Barrel-Faced Piston - Chrome-Faced Racing Only Piston Ring Package - Nitrited, Dished Exhaust Valve - Automotive 3-Peice Valve Retainer System - Beefy Rocker Arm Stud Nuts - Green™ Air Filter (LO206JR Engine Only) - Max-Torque Clutch & Fastener Set (LO206JR Only)


Performance by Design. Briggs took the latest approach in engineering, manufacturing, and testing to design, from the ground-up, a dedicated RACING engine. In addition, every engine is hand-built by master engine technicians and tested in Milwaukee, Wisconsin.

124332 Briggs Animal 124332LO Briggs LO206 124332LOJR Briggs LO206 JR 124332M Briggs LO206 Q.M.

PART# DESCRIPTION



. : : 3

. : : BRIGGS ANIMAL PARTS (continued)

. : : BRIGGS ANIMAL AFTERMARKET PARTS

555660 PISTON ASSEMBLY - STANDARD 555661 PISTON ASSEMBLY - .010 555662 PISTON ASSEMBLY - .020 555663 PISTON ASSEMBLY - .030 555664 RING SET - STANDARD 555665 RING SET - .010 555666 RING SET - .020 555667 RING SET - .030 555679 ROCKER COVER 555680 CYLINDER SHIELD 555681 ARMATURE - MAG. PVL (12000rpm) 555683 FLYWHEEL - PVL 555685 FLYWHEEL & MAGNETO KIT (PVL) 555688 BREATHER ASSEMBLY 555690 HEAT DISPENSER 555691 JET - NEEDLE (BHA) 555698 GASKET - CYLINDER HEAD 555699 PANEL - CONTROL COVER 555702 SHIELD-BLOWER HOUSING 555704 HOUSING-BLOWER 555705 CYLINDER ASSEMBLY 555706 COVER-CRANKCASE 555711 ARM-ROCKER 555715 SHORT BLOCK - LO206 555717 COVER-CHOKE 555718 ARMATURE - MAG. PVL (6100rpm) 555719 WIRE - SPARK PLUG

555721 GEAR REDUCTION 555722 SPLINED CRANK SHAFT 555723 GASKET - CYL. HEAD 555725 ARMATURE - MAG. PVL (4100rpm) 555726 CLAMP - SLIDE 555728 LO206 JR THROTTLE SLIDE 555729 LO206 „SPEC‟ AIR FILTER 555733 CARB SLIDE - RED 555734 CARB SLIDE - BLUE 555735 CARB SLIDE - PURPLE 557137 CRANK SHAFT - ANIMAL & WF 699201 SCREW - FLYWHEEL FIN 699230 ANIMAL TOP PLATE BOLT 699359 792723 FLYWHEEL NUT 699477 SCREW - COIL 699478 SCREW - SIDE COVER 699479 SCREW - CONTROL BRACKET 699481 SCREW - ROCKER COVER (BOTTOM) 699482 SCREW - HEAD 699483 SCREW - CYLINDER SHIELD 699491 SCREW - CONTROL COVER SHORT 699492 SCREW - CONTROL COVER LONG 793379 WIRE-STOP (NEW STYLE SHIELDING) 808656 PUMP - FUEL 86-3231 CARB-MAIN NOZZLE(AFTERMARKET)

PART# OEM # DESCRIPTION PART# OEM # DESCRIPTION

DAS DYNO ANIMAL SPRING (each) DAS2 DYNO ANIMAL SPRING (SUGGESTED FOR AN002 CAM) (each) XSA X-CALIBER ANIMAL SPRING. (each) ADSK DYNO ANIMAL DUAL VALVE SPRING KIT

(INCLUDES RETAINERS)

AFTERMARKET VALVE SPRINGS

PART # DESCRIPTION

Replacement aftermarket valve springs for the Briggs Animal engine.

ANIMAL PISTON RINGS

ATR010 ANIMAL TOP RING (.010) ATR020 ANIMAL TOP RING (.020) ATR030 ANIMAL TOP RING (.030) ATR040 ANIMAL TOP RING (.040)

PART # DESCRIPTION

High quality chrome faced compression piston rings for the Briggs Animal O.H.V. engine.

DYNO ANIMAL CAMS (STOCK AND MODIFIED)

AN001W WIDE POWER BAND FOR THE ANIMAL ENGINE - WELDED LOBE (WKA/IKF LEGAL) AN001WC AN001W CAM WITH COMPRESSION RELEASE TO ALLOW USE OF RECOIL STARTER (WKA/IKF LEGAL) AN002W MORE AGRESSIVE RAMP CAM THAT CUTS IT CLOSE ON CERTAIN PROFILE CHECKS. WORKS WELL WITH THE NEW #DAS2 DYNO SPRINGS. (WKA/IKF LEGAL) AN002WC AN002W CAM WITH COMPRESSION RELEASE TO ALLOW USE OF RECOIL STARTER.

(WKA/IKF LEGAL) ANMOD1 MODIFIED CAM FOR THE NEW ANIMAL MODIFIED CLASS 255 MODIFIED 6.5HP ANIMAL OHV CAM, WELDED LOBE (255 LIFT) 275 MODIFIED 6.5HP ANIMAL OHV CAM, WELDED LOBE (276 MAX LIFT) 308 MODIFIED 6.5HP ANIMAL OHV CAM, 8000 PRM, (307 MAX LIFT) 356 MODIFIED 6.5HP ANIMAL OHV CAM, 8500 RPM, (356 MAX LIFT)

PART # DESCRIPTION

ANIMAL BILLET RODS

PART # DESCRIPTION

Aftermarket Billet Rods for the Briggs Animal O.H.V.

ARC RODS ARC NUMBER

ARC3281 ARC BILLET ROD 3.281 (.005 under) (#6245) ARC3287E ARC BILLET ROD 3.287 L/W ENDURO (#6247) ARC3287MOD ARC BILLET ROD 3.287 MOD (#6249) ARC3375 ARC BILLET ROD 3.375 F200 (#6252)

WMS RODS WMS3282 WILLIAMS (WMS) BILLET ROD 3.282 (.005) ANIMAL WMS3287 WILLIAMS (WMS) BILLET ROD 3.287 ANIMAL

ANIMAL ROD INSERT & HARDWARE

ARI ROD INSERT - Animal ARCARB ARC ROD BOLT - ANIMAL (#6381)

PART # DESCRIPTION



. : : 4

. : : BRIGGS ANIMAL AFTERMARKET PARTS (cont.)

ANIMAL RESTRICTOR PLATES

RPA-P Animal - Purple, .225 (3 hole) RPA-B Animal - Black, .250 - (3 hole) RPA-G Animal - Gold, .313 - (3 hole) RPA-R Animal - Red, .275 - (3 hole)

RPA05-B 2005 Animal - Black, .575 (1 hole) RPA05-G 2005 Animal - Gold, .500 (1 hole)

RPA07BL 2007 Animal - Blue, WKA JRII (2 hole) RPA07P 2007 Animal - Purple, WKA JRI (2 hole)

ARPG Animal Restrictor Plate Gasket (each)

Restrictor plates for the Briggs Animal engine.

PART # DESCRIPTION

WMSKL KWIK-LINK ANIMAL THROTTLE KIT LNQL LEATHERNECK ANIMAL THROTTLE KIT

KMBTKTCL ANIMAL / CLONE TILLOTSON CARB THROTTLE KIT

TCI INNER THROTTLE CABLE - ANIMAL (BARREL END)

PART # DESCRIPTION

THROTTLE LINKAGE ACCESSORIES

KMBTKTCL WMSKL LNQL

ANIMAL JET BLOCK

AJBA ANIMAL JET BLOCK (jets not included)

Aluminum Briggs Animal jet block. Great for keeping a range of jets organized into one place and not scattered all over the drawer.

PART # DESCRIPTION

4216 ANIMAL EXHAUST GASKETS MADE OF COPPER (pack of 5)

PART # DESCRIPTION

ANIMAL EXHAUST GASKETS

Copper exhaust gaskets for the Briggs Animal O.H.V. Engine.

(sold in packs of 5)

ANIMAL SPARK PLUGS

491055S OEM AR3910 AUTOLITE AR3924 AUTOLITE AR3933 AUTOLITE Q16RU11 STANDARD TIP Q20RU11 STANDRAD TIP Q22PRU11 STANDARD TIP Q16RZU11 PLATINUM TIP Q20RZU11 PLATINUM TIP

Animal Spark Plugs in several temperature ranges from both Auto-Lite® and Denso as well as the Briggs OEM plug.

PART # DESCRIPTION

ANIMAL (METRIC) STARTER NUT

JRSNM ANIMAL STARTER NUT

Electric Starter Nut in metric thread which fits the Briggs Animal engine. Designed for a 3/4” (19mm) Socket or 5/16” (8mm) hex driver.

PART # DESCRIPTION

ANIMAL CARB COVER

GMACC G-MAN ANIMAL CARBURETOR COVER

G-Man rubber carb cover for the Briggs Animal engine. Great for keeping dirt and debris out of engines in storage.

PART # DESCRIPTION

ANIMAL INTAKE SUPPORT

FMCIS ANIMAL INTAKE SUPPORT

The Animal intake support is a bracket to support the carb & intake manifold from stress caused by the vibrations of the engine and track.

PART # DESCRIPTION

ANIMAL CHOKE SPRING

KMACS BRIGGS ANIMAL CHOKE LEVER SPRING

Animal choke spring. Holds the choke lever open to ensure the choke does not vibrate shut during racing.

PART # DESCRIPTION

DSLA BILLET STOCK COPY LIFTERS (SET OF 2) DELA EXTENDED LIFTER (SET OF 2)

AFTERMARKET LIFTERS

PART # DESCRIPTION

Aftermarket lifters in both stock and extended lengths for the Briggs Animal engine.

(Sold in sets of 2)

ANIMAL TILLOTSON MANIFOLD

JRTM2A ANIMAL TILLOTSON MANIFOLD (2”)

Billet carburetor manifold for the Briggs Animal engine to fit a Tillotson carburetor.

PART # DESCRIPTION

ANIMAL VENT TUBE KIT

Comes with a fitting and grommet that allows attachment of a breather tube to a catch tank.

PART # DESCRIPTION



. : : 5

. : : BRIGGS ANIMAL AFTERMARKET PARTS (cont.)

** IF A HEADER IS NOT LISTED, PLEASE CALL FOR AVAILABILITY AND PRICING **

ANIMAL FOAM PRE-FILTERS

UIPF110 3” x 5” FOAM PRE-FILTER

Foam pre-filter that will fit 3” x 5” air filters.

PART # DESCRIPTION

ANIMAL FABRIC AIR FILTERS

AFR100 3” X 4” SMALL (1 1/4”) ANGLED AFR110 3” X 5” LARGE (1 1/4”) ANGLED

Air Filters that fit the Animal carburetor. (1.25” opening)

Available in SMALL(4”) or LARGE (5”)

PART # DESCRIPTION

ANIMAL HEADER BRACE

LNAHB ANIMAL HEADER BRACE

Header brace for the Briggs Animal. Also doubles as a mount for the #WACC catch tank (pg 18).

PART # DESCRIPTION

EXHAUST HEADER HARDWARE

DHBA DRILLED HEADER BOLT METRIC, 6MM DHBKA DRILLED HEADER BOLT KIT, 6MM (includes: 2 bolts, 2 washers & safety wire)

Metric size header bolts for the Briggs Animal engine.

PART # DESCRIPTION

OUTERWEARS® PRE-FILTERS

OWPF100** PRE-FILTER FOR AFR100 (**Specify Color) OWPF110** PRE-FILTER FOR AFR110 (**Specify Color)

OUTERWEARS® air filter covers for the Briggs Animal fabric air filters. (Available in Red, Blue, Black, & Yellow)

PART # DESCRIPTION

R2C PERFORMANCE ANIMAL AIR FILTERS

PART # DESCRIPTION

CY10802 Animal Filter 3" x 4" (1.25" I.D.) 20* FLANGE CY10803 Animal Filter 3" x 5" (1.25" I.D.) 20* FLANGE

Specifically designed to stop more dirt and make more horsepower than competitive air filters as they begin to collect dust.

Unmatched Engine Protection for Kart engines Durable hex filter screen for maximum durability! No Air Filter OILING! WKA Approved

R2C PRE-FILTERS

R2C0210A21 R2C PRE FILTER (fits #CY10802) R2C0210A22 R2C PRE FILTER (fits #CY10803)

R2C air filter covers for the R2C animal air filters. (Black Only)

PART # DESCRIPTION

Super Snake

Candy Cane

BIV-M

ROBERTSON ANIMAL HEADERS

ISS-F SUPER SNAKE (FLARED END VERSION) GREAT STOCK ALCOHOL ENGINE PIPE (.902”, .930”, and .960” ID, 20.50” IL) ICC-F CANDY CANE (FLARED END VERSION) STRONG MID-RANGE & TOP-END. (.902”, .960” ID, 14.75” IL)

ISS SUPER SNAKE (SILENCER VERSION) 1-5/16” SILENCER GREAT STOCK ALCOHOL ENGINE PIPE (.902”, .930”, and .960” ID, 20.50” IL) ICC-M CANDY CANE (SILENCER VERSION) 1-5/16” SILENCER STRONG MID-RANGE & TOP-END. (.902”, .960” ID, 14.75” IL) ICC-MOD-M CANDY CANE (SILENCER VERSION) OPEN & MODIFIED ENGINES. STRONG MID-RANGE & TOP-END, 1-5/16” SILENCER (1.025” ID, 16.00” IL) BIV-M ONE PIECE - VENTURI (SILENCER VERSION), SAME BEND AS SUPERSNAKE. GREAT FOR BLUE & PURPLE PLATE ENGINES. (.902” ID, 22.00” IL) I-SUS-V-M SUPER SNAKE - VENTURI (SILENCER VERSION) 1-5/16” SILENCER GREAT STOCK ALCOHOL ENGINE PIPE (.902”, .930”, and .960” ID, 20.50” IL) I-SUS-C2-M SUPER SNAKE - CHAMP KARTS (SILENCER VERSION) GOOD BOX STOCK & RESTRICTED ENGINES, 1-5/16” SILENCER (.902” ID, 21.75” IL) ICC-SQ-M CANDY CANE - SQUARED (SILENCER VERSION), 1-5/16 SILENCER STRONG ACCELERATION FOR TIGHT TRACKS. (.960” ID, 14.75” IL)

(Mounting Kits Included)

PART # DESCRIPTION

R.L.V. ANIMAL HEADERS

(Mounting Kits Included)

5500 Animal (Wide Power Band) 5502 Animal (Best Bottom End) 5504 Animal (Best Top End)

5506 Local Option 206 Spec Header 5507 Local Option 206 Junior Spec Header

5500 / 5502 / 5504 5506 5507

PART # DESCRIPTION



. : : 6

. : : BRIGGS WORLD FORMULA ENGINE



. : : 7

. : : BRIGGS WORLD FORMULA ENGINE

FEATURES

- Dual Ball-Bearing, reinforced cylinder - Billet connecting rod - Slotted, Stelite-Faced Ground Cam with compression release - Dual, High Silicon Valve Springs - PVL™ Digital Ignition System with 7100rpm rev limiter - CNC D-shape Intake Port - Walbro™ Round-Slide Carb - Dana™ Fire-Ring Head Gasket

- Racing Crankshaft w/ induction hardened crank pin - Green™ Air Filter - Federal-Mogul™ Moly-Coated, Cam-Ground, Barrel- Faced Piston - Chrome-Faced Racing Only Piston Ring Package - Port Liner Exhaust System - Automotive 3-Peice Valve Retainer System - Beefy Rocker Arm Stud Nuts - Mikuni™ Fuel Pump - Nor-Am™ Clutch w/ quick-change sprocket set

Performance by Design. Briggs took the latest approach in engineering, manufacturing, and testing to design, from the ground up, a dedicated RACING engine. In addition, every engine is hand-built by master engine technicians and tested in Milwaukee, Wisconsin.

** THE WORLD FORMULA ENGINE SHARES SOME PARTS WITH THE ANIMAL AND FLAT-HEAD ENGINES **

** SEE ANIMAL (Pages 1 - 3) & FLAT-HEAD (Page 8) PAGES FOR PART NUMBERS STARTING IN „555‟ OR „699‟ **

. : : BRIGGS WORLD FORMULA PARTS

555721 GEAR REDUCTION ASSY. (Q.M.A.) 555722 SPLINED CRANKSHAFT (FOR GEAR REDUCTION ASSY.) 557000 LIMITER - REV 557006 CARBURETOR 557007 SEAL - O-RING 557008 BOWL - FLOAT 557009 MANIFOLD - INTAKE 557012 JET KIT - MAIN 557015 ARM - ROCKER 557016 CAP - VALVE 557017 VALVE - INTAKE 557018 VALVE - EXHAUST 557024 SPRING - VALVE 557025 RETAINER - VALVE 557026 RETAINING - RING 557027 GASKET SET - VALVE 557028 PUSH-BUTTON SWITCH 557034 BLOWER HOUSING 557035 692551 SCREW 557038 710530 TAPPET - VALVE 557039 SPARK PLUG 557041 CAM SHAFT - STOCK 557042 691678 SCREW - BLOWER HOUSING 557043 698973 CLEANER - AIR 557044 GASKET - INTAKE 557045 MANIFOLD - EXHAUST 557047 691893 GASKET - EXHAUST 557048 COVER - CONTROL 557051 CLAMP - CARB FLANGE 557067 SOLINOID - STARTER 557068 STARTER ASSY.


557073 691293 RETAINER - BRUSH 557078 SCREW 557079 DRAIN - CARB BOWL 557080 FLOAT - CARBURETOR 557081 JET - NEEDLE 557082 GASKET - FLOAT BOWL 557083 VALVE - THROTTLE 557084 KIT - IDLE SPEED 557085 KIT - IDLE MIXTURE 557086 TUBE - EMULSION 557087 WF SPRING - THROTTLE RETURN 557088 CAP-THROTTLE CABLE 557089 KIT - CARB OVERHAUL 557097 EXHAUST STUD 557107 SCREW - FLYWHEEL SCREEN 557110 GASKET SET - ENGINE 557117 ROD - CONNECTING 557118 GUIDE - BUSHING 557119 STARTER BRACKET BRACE 557120 SCREW - STARTER BRACKET-LW/PRFL 557121 PISTON ASSEMBLT - STANDARD 557122 PISTON ASSEMBLY - .010 557123 PISTON ASSEMBLY - .020 557124 PISTON ASSEMBLY - .030 557125 PVL MAGNETO 557126 WORLD FORMULA PVL FLYWHEEL 557127 PVL IGNITION KIT 557128 RING GEAR 557130 SPACER - CARBURETOR 557131 CLAMP 557133 HEAD - CYLINDER 557137 CRANKSHAFT


124335 Briggs World Formula

PART# DESCRIPTION

SPARK PLUGS

557039 OEM U24ESRNZU PLATINUM TIP

PART # DESCRIPTION

Spark plugs for the Briggs World Formula O.H.V. engine.

R.L.V. SILENCER

& MOUNTING KITS

5447SK8 Spec Pipe and Silencer Kit World Formula WFQMP Pipe Kit - W/F Quarter Midget 0516 Silencer Mount Kit World Formula 0517 Silencer Mount Kit Local Option 206

PART # DESCRIPTION



. : : 8

. : : BRIGGS FLATHEAD PARTS

55501 10 PK 555078 INTAKE GASKET 55502 10 PK 555119 DIAPHRAM 55503 4164 10 PK 555139 VALVE GUIDE 55504 4179 10 PK 555084 TANK GASKET 55505 10 PK 555504 .015 TOP RING 55506 10 PK 555505 .025 TOP RING 55507 10 PK 555506 .035 TOP RING 55508 4159 10 PK 555036 BREATHER GASKET 555035 CIR CLIP - RAPTOR II 555037 281658S PLUG - OIL FILL BOTTOM 555038 690662 NUT- FLYWHEEL 555039 692194 RETAINER - SPRING LOWER 555040 691621 SCREW - MAGNETO 555041 691640 HEAD BOLT - SHORT 555042 SCREW - CARB MOUNTING 555043 691666 SCREW - BREATHER 555044 691685 SCREW - TANK MOUNT LOWER 555045 691659 HEAD BOLT - LONG 555046 691660 SCREW - FLYWHEEL GUARD

555047 691129 SCREW - CRANK CASE 555048 692200 SCREW - TANK 555049 690979 KEY - WOODRUFF 555050 692007 PTO BEARING 555051 SCREW - BLOWER HOUSING 555053 691732 GUARD - FLYWHEEL 555054 222698S KEY - FLYWHEEL 555055 691745 GUIDE - AIR 555060 690520 SPRING - INTAKE 555061 690509 TAPPET 555062 261044S VALVE - INTAKE 555064 270125 GASKET - CRANK CASE .005 555065 270126 GASKET - CRANK CASE .009 555070 691664 BOLT - CONNECTING ROD 555071 299819S SEAL - MAG 555072 493880S TERMINAL IGNITION 555074 692187 BREATHER GROMMET 555075 397358 ARMATURE - MAGNETO 555076 692180 SPRING - EXHAUST 555077 211119S VALVE - EXHAUST 555079 691686 PLUG - OIL DRAIN 555082 691690 STUD - CYLINDER 555083 690582 WASHER - FLYWHEEL 555085 394818S CAP - FUEL TANK 555087 495307S SEAL - PTO 555096 690759 SCREW - HEX FLYWHL SCREEN 555098 691995 SWITCH ASSEMBLY 555100 691946 SHAFT - THROTTLE 555101 691783 SPRING - ADJUSTMENT 555102 691624 SCREW - IDLE ADJUST 555103 691770 FUEL PIPE - BRASS 555104 690977 BELL CRANK 555105 691585 PLUG - WELCH 555106 691608 GASKET - NEEDLE VALVE 555107 691619 SCREW - DIAPHRAM COVER 555108 690296 PIN - ROLL 555110 691630 SCREW - BELLCRANK 555111 211203 CARBURETOR BUTTERFLY #6 555112 691713 COVER - DIAPHRAM 555113 690766 CAP - DIAPHRAM SPRING 555114 SEAT - NEEDLE VALVE 555115 692206 SPRING - DIAPHRAM 555116 691786 LINK - THROTTLE 555117 690498 SPRING - THROTTLE 555118 692279 WASHER - SHAFT FOAM 555120 497413S TUBE - PICK UP SHORT 555121 692279 SEAL - THROTTLE SHAFT 555122 691606 PACKING - NEEDLE VALVE 555123 SPRING - NEEDLE VALVE 555124 VALVE - MIX ADJUST 555125 690257 WASHER - NEEDLE VALVE 555126 690504 NUT - NEEDLE VALVE 555127 299060 NEEDLE VALVE KIT 555128 391813 TUBE - PICK UP LONG 555130 REBUILD KIT - CARB 555135 691876 RING - OIL RETAINER 555136 691705 SEAT - INTAKE VALVE 555137 691701 SEAT - EXHAUST VALVE 555138 691363 PLUG - OIL FILL TOP


555140 DU BUSHING 555147 691760 RETAINER - VALVE UPPER 555149 99157 BEARING - BALL 555150 99158 PTO BEARING - OLD STYLE 555151 691844 SEAT - VALVE 555152 695161 CUP - FLYWHEEL 555153 PIN - CRANKSHAFT 555154 692882 PLUG 555155 231348 BUSHING - GUIDE 555156 231349 BUSHING - GUIDE 555157 261696 GEAR - TIMING O/S 555158 262001 BUSHING - GUIDE 555160 273326S GASKET - OIL GUARD COVER 555162 692927 BOOT - SPARKPLUG 555165 390463 STARTER - REWIND O/S 555166 393812 SEAL - PTO OLD STYLE 555167 394970 MAGNETRON IGNITION KIT O/S 555171 399671 BENDIX - STARTER 555172 493290 CRANKSHAFT - SMALL BEARING

555175 STARTER - REWIND N/S 555192 TANK - FUEL RAPTOR III 555204 495645 CRANKSHAFT 555207 ROD - CONNECTING 555208 ROD - CONNECTING .020 555210 GASKET SET - RAPTOR II 555211 692849 SCREW - FLYWHEEL SCRN/TRX 555213 SPRING - NEEDLE VALVE 555214 GUIDE - EXH VALVE - RAPTOR 555220 KIT - TANK REPAIR INSERT 555235 GEAR - TIMING 555236 GASKET - CYLINDER HEAD 555237 GASKET - CRANKCASE .015 555256 495759 HOUSING - BLOWER (BLACK) 555258 SCREW - BUTTERFLY/SLOTTED 555485 RING SET - STD 555486 RING SET - 010 / 015 555487 RING SET - 020 / 025 555488 RING SET - 030 / 035 555494 TOP RING - 015 555495 TOP RING - 025 555496 TOP RING - 035 555498 694514 COVER - CYLINDER (1 PIECE) 555504 TOP RING - 010 / 015 555506 TOP RING - 030 / 035 555508 LOCK - PISTON PIN 555509 PISTON PIN - RAPTOR 3 555640 BLOCKZILLA II CYLINDER 555669 CYLINDER ASSY - NEW STYLE 555672 PISTON ASSY - STD 555673 PISTON ASSY - 010 555674 PISTON ASSY - 015 555675 PISTON ASSY - 020 555677 PISTON ASSY - 030 555689 BREATHER ASSEMBLY


230978 499047 PIN - CRANKSHAFT 231348 BRASS GUIDE 271139 271139S GASKET - AIR CLEANER 299692 OFF SET THROTTLE SHAFT 397135 CARBURETOR 494807 691382 OIL GUARD COVER 691663 DRAIN PLUG - MAGNETIC 691881 GASKET - EXHAUST STEEL



. : : 9

. : : BRIGGS FLATHEAD AFTERMARKET PARTS

PART # DESCRIPTION

VALVE SPRINGS & RETAINERS

DES1360 DYNO STOCK COPY VALVE SPRINGS. 1.360” (each) DES1420 DYNO STOCK COPY VALVE SPRINGS. 1.420” (each) DES1460 DYNO STOCK COPY VALVE SPRINGS. 1.460” (each) DES1485 DYNO STOCK COPY VALVE SPRINGS. 1.460” (each)

XS1370 X-CALIBER FLAT HEAD VALVE SPRING (1.370”) (each) XS1400 X-CALIBER FLAT HEAD VALVE SPRING (1.400”) (each) XS1430 X-CALIBER FLAT HEAD VALVE SPRING (1.430”) (each) XS1460 X-CALIBER FLAT HEAD VALVE SPRING (1.460”) (each) XS1480 X-CALIBER FLAT HEAD VALVE SPRING (1.480”) (each) 93201 DYNO FLATHEAD DUAL VALVE SPRING KIT (INCLUDES KEEPERS & RETAINERS)

VKK DYNO FLATHEAD RETAINER & KEEPER KIT FOR DUAL SPRINGS DLR DYNO STOCK FLATHEAD HARDENED LOWER RETAINERS (A MUST FOR HIGH RPM CAMS!)

Replacement aftermarket valve springs & retainers for the Briggs Flathead engine.

FLATHEAD CAMS

89-7EXP SR. STOCK & SUPER STOCK. WIDE POWER BAND 95-3 SR. STOCK & SUPER STOCK. EXCELLENT TOP END. VERY RAPID RAMP RATES. 95-6 JR 1. HAS FAST, SHORT DURATION NON-SYMMETRICAL LOBES 96-3 FAST RAMP SPEED WITH CLOSE LASH. WIDE POWER BAND. HARD ON VALVE TRAIN. aka: “BLOCK BUSTER” 04-3 SR. STOCK. LOW END HP, SAME TOP END AS 7X. 07-3 HIGH RPM STOCK CLASS CAM 7X JR & SR STOCK. FAST RAMP WIDE POWER BAND UP TO 6800 RPM 94SS STOCK CHEATER CAM. 18% POWER GAIN. PULLS HARD FROM 4000 RPM AND UP. NOT WKA OR IKF LEGAL.

PART # DESCRIPTION

FLATHEAD BILLET RODS

PART # DESCRIPTION

Aftermarket Billet Rods for the Briggs Flathead engine.

ARC RODS ARC NUMBER

ARC3870E ARC BILLET ROD 3.870 ENDURO (#6328) ARC3875E ARC BILLET ROD 3.875 ENDURO (#6330) ARC3870 ARC BILLET ROD 3.870 (#6348) ARC3875 ARC BILLET ROD 3.875 (#6350)

ARC4375 ARC BILLET ROD 4.375 (#6358) ARC4475 ARC BILLET ROD 4.475 (#6362) ARC4500 ARC BILLET ROD 4.500 (#6364)

WMS RODS WMS3875 WILLIAMS (WMS) BILLET ROD 3.875 FLATHEAD WMS3870 WILLIAMS (WMS) BILLET ROD 3.870 FLATHEAD

BURRIS PISTONS

BSF-202-10 Aluminum Piston (.010) BSF-202-15 Aluminum Piston (.015) BSF-202-20 Aluminum Piston (.020) BSF-202-25 Aluminum Piston (.025) BSF-202-30 Aluminum Piston (.030) BSF-202-35 Aluminum Piston (.035) BSF-202-40 Aluminum Piston (.040) BSF-202-45 Aluminum Piston (.045) BSF-202-50 Aluminum Piston (.050) BSF-202-25C Chrome Piston (.025) BSF-202-30C Chrome Piston (.030) BSF-202-35C Chrome Piston (.035) BSF-202-40C Chrome Piston (.040) BSF-202-45C Chrome Piston (.045) BSF-202-50C Chrome Piston (.050)

PART # DESCRIPTION

Burris Racing aftermarket replacement pistons for the Briggs flathead engine.

BURRIS RINGS

BTRSTDR3 TOP RING STD R3 BTR010R3 TOP RING .010 R3 BTR020R3 TOP RING .020 R3 BTR030R3 TOP RING .030 R3 BTR040R3 TOP RING .040 R3 BTR050R3 TOP RING .050 R3

BSR010R3 SCRAPER RING .010 R3 BSR020R3 SCRAPER RING .020 R3 BSR030R3 SCRAPER RING .030 R3 BOR010R3 OIL RING .010 R3 BOR020R3 OIL RING .020 R3 BOR030R3 OIL RING .030 R3

PART # DESCRIPTION

Burris Racing aftermarket piston rings for the Briggs flathead engine.

BCS STEEL CYLINDER SLEEVE (2.690 X 2.530)

CYLINDER SLEEVE

Replacement cylinder sleeve for the Briggs flathead engine.

PART # DESCRIPTION

FLATHEAD ROD INSERT & HARDWARE

SRI ROD INSERT - Std. ARCRB ARC ROD BOLTS (Set) (#6380) ARCSRB ARC STROKER ROD BOLTS (Set) (#6381) ARC6392 ARC ROD INSERT - Std. (#6392) ARC6392-2 ARC ROD INSERT - .002 (#6392-2) ARC6392-5 ARC ROD INSERT - .005 (#6392-5) ARC6398 ARC ROD INSERT - .875 STROKER (#6398)

PART # DESCRIPTION



. : : 10

. : : BRIGGS FLATHEAD AFTERMARKET PARTS (cont.)

EXF283-75 Valve Guide .283x.75L EXF283-100 Lifter Bore Bushing .283x.1.0L EXF283-125 Valve Guide .283x1.25L EXF310-125 Valve Guide .310x1.25L EXF310-150 Valve Guide .310x1.5L EXF314-150 Valve Guide .314x1.5L EXF316-150 Valve Guide .316x1.5L EXF376-75 Valve Guide .376x.75L EXF376-125 Valve Guide .376x1.25L

PART # DESCRIPTION

Aftermarket flathead valve guides by CV Racing Products.

CV FLATHEAD VALVE GUIDES

DRILLED HEADER BOLTS

DHB DRILLED HEADER BOLT (1/4”) (each) DHBK DRILLED HEADER BOLT KIT (1/4”) (each) (includes: Safety wire, 2 bolts, and 2 washers)

PART # DESCRIPTION

Imperial thread 1/4” drilled header bolts available in both single and kits. (Kits include (2) bolts, washers & safety wire).

EXHAUST GASKETS

Aftermarket exhaust gaskets for the Briggs flathead engine.

EGB EXHAUST GASKET (each)

PART # DESCRIPTION

PART # DESCRIPTION

R.L.V. EXHAUST HEADERS

5415C Restricted Class - Purple Restrictor, Speedway 5417C Restricted Classes - Bottom End & Mid 5419C Restricted Classes - Bottom End & Mid 5452C Restricted & Stock - Bottom End & Mid 5464C Super Stock & Limited - Strong Mid and Top End

Exhaust headers for the Briggs Flathead engine. (A separate silencer or weld on flared end required)

ROBERTSON HEADERS

1RMC 3 STAGE CURVED, .425 or .500 PLATE 1 1/8” SILENCER (.775 ID, 17.75” IL)

1TMC 4 STAGE CURVED, .500 or .575 PLATE 1 5/16” SILENCER (.902 ID, 15” IL)

1TMCXX 4 STAGE CURVED, STOCK & SUPER STOCK 1 5/16 SILENCER (.960 ID, 15” IL)

ARMC 3 STAGE CURVED, STOCK 1 5/16” SILENCER (.902 ID, 17.25” IL)

PART # DESCRIPTION

Exhaust headers for the Briggs Flathead engine by Robertson Kart Pipes.

ALUMINUM HEADER BRACE

AHB BILLET ALUMINUM HEADER BRACE

PART # DESCRIPTION

Keeps even pressure across head area to reduce warping from heat. Also provides anchor for header brace.

SPIW Spark Plug Index Washers

PART # DESCRIPTION

SPARK PLUG INDEX WASHERS

Package of 30 copper index washers. Washers are .012 thick and turn plug 1/4 turn.

FLATHEAD SPARK PLUGS

W16FSU STANDARD TIP W20FSU STANDARD TIP W22FSU STANDARD TIP W24FSU STANDARD TIP W27FSU STANDARD TIP W31FS STANDARD TIP W20FSZU PLATINUM TIP W22FSZU PLATINUM TIP W31FSZU PLATINUM TIP AL411 AUTOLITE

PART # DESCRIPTION

Spark Plugs for the Briggs Flathead in several temperature ranges from both Auto-Lite® and.OEM plug.

SLEEVELESS MAG BEARING

SB SLEEVELESS MAG BEARING

Sleeveless mag. bearing for the Briggs flathead engine.

PART # DESCRIPTION

BILLET LIFTERS

DSL BILLET STOCK COPY LIFTERS (pair) WMSSL WMS BILLET STOCK COPY LIFTERS (pair) DEL EXTENDED LIFTERS (pair)

PART # DESCRIPTION

Aftermarket lifters in both stock and extended length for the Briggs flathead engine. (Sold per pair)



. : : 11

. : : BRIGGS FLATHEAD AFTERMARKET PARTS (cont.)

STARTER NUT

JRSN STARTER NUT (American Thread)

PART # DESCRIPTION

American thread starter nut which fits the Briggs flathead crankshaft.

BILLET COIL BRACKETS

JRCB5 Coil Bracket for 5hp Coil JRCB3 Coil Bracket for 3hp Coil

PART # DESCRIPTION

JR Racecar billet coil brackets for the Briggs flathead engine.

WILLIAMS TANK SUPPORT

WMSTS WMS WEDGE TANK SUPPORT

PART # DESCRIPTION

Aluminum wedge style tank support. Mounts under the Briggs flathead tank to reduce/stop tank leaks and breaks.

THROTTLE LINKAGE KITS

KMBTK FLATHEAD STOCK CARB THROTTLE KIT KMBTKT FLATHEAD TILLOTSON THROTTLE KIT

PART # DESCRIPTION

KMBTK KMBTKT

BTC BRIGGS FLATHEAD THROTTLE CLEVIS

PART # DESCRIPTION

Throttle arm clevis kit for the Briggs flathead engine.

FLATHEAD THROTTLE CLEVIS

TANK BOLT KIT

VK-173 BRIGGS FLATHEAD TANK BOLT KIT

PART # DESCRIPTION

Briggs Flathead tank bolt kit. (3 per kit)

G-MAN CARB COVER

GMCC 2-7/16” I.D. CARB COVER

PART # DESCRIPTION

G-Man carb cover. Fits the 2-7/16” filter adapter.

FILTER ADAPTER

PCAF3 BRIGGS FLATHEAD FILTER ADAPTER

PART # DESCRIPTION

Briggs flathead filter adapter with a 2-7/16” O.D.

JRTM2** 2” MANIFOLD, FLATHEAD (.890” or 1.00”) JRTM3** 3” MANIFOLD, FLATHEAD (.890” or 1.00”)

PART # DESCRIPTION

Intake manifolds for the Tillotson carburetor.

TILLOTSON INTAKE MANIFOLDS

KMBTS THROTTLE RETURN SPRING

PART # DESCRIPTION

Throttle return spring for the Briggs flathead stock carb.

THROTTLE RETURN SPRING

CARB SUPPORTS

BTSNS CARB SUPPORT (heavy duty)

PART # DESCRIPTION

A heavy duty carb support for the Briggs flathead engine. Requires throttle cable bracket.

RESTRICTOR PLATES

RP-P WKA - Purple (.425”) RP-T WKA - Turquoise (.500”) RP-G WKA - Gold (.575”)

PART # DESCRIPTION

Restrictor plates for the Briggs flathead engine.

BVTKA Aluminum vent tube kit

PART # DESCRIPTION

BREATHER VENT TUBE KIT

Supports the breather hose coming out of the rubber grommet.

(Black anodized only)

DRILLED JETS & JET BLOCK

AJB Briggs Flathead Jet Block (Jets Included) (.046 - .064 in .002 increments) DJ** Briggs Flathead Drilled Jet (** specify size) (Sizes: .046 - .064 in .001 increments)

PART # DESCRIPTION

Drilled Jets for the Briggs flathead engine. Also available is a handy jet block to organize and store the jets in your toolbox.



. : : 12

. : : DUPOR CLONE O.H.V. ENGINE

DUPOR - 6.5hp - 196cc - 2008 EPA legal PLEASE NOTE: - All parts may not interchange with all other Clone versions

This O.H.V. engine is designed for general purpose use only. For recreational or Motorsports use; it is STRONGLY recommended that an aftermarket S.F.I. certified billet flywheel and rod be used for durability and safety.

1 JF168-1020 Ignition Coil 2 JF168-1810 Plug Boot 3 NOT YET IN STOCK Kill Switch Wire 4 NOT YET IN STOCK Flange Bolt (6x25) 5 NOT YET IN STOCK Flywheel 6 JF168-1201 Flywheel Fan 7 JF168-1390 Starter Cup 8 JF168-4140 Flywheel Nut

REF PART # DESCRIPTION

COIL & FLYWHEEL

1 JF168-4000 Crankshaft 2 JF168-3600 Connecting Rod Assembly 3 JF168-1501 Piston (std) 3 JF168-1502 Piston (.010) 3 JF168-1503 Piston (.020) 4 JF168-3100 Ring Set (std) 4 JF168-3101 Ring Set (.010) 4 JF168-3102 Ring Set (.020) 5 JF168-3400 Piston Pin 6 JF168-3900 Piston Pin Clip 7 NOT YET IN STOCK Rod Bolts 8 JF168-1172 Stock Flywheel Key 9 NOT YET IN STOCK Clutch Key (4.78x4.78x38mm)


CRANKSHAFT, PISTON & CONNECTING ROD

1 JF168-1000 Cylinder Head 2 NOT YET IN STOCK Intake Valve Guide (oversize) 3 NOT YET IN STOCK Exhaust Valve Guide (oversize) 4 NOT YET IN STOCK Valve Guide Clip 5 JF168-2300 Cylinder Head Gasket 6 JF168-1110 Valve Cover (4-bolt) 7 JF168-1130 Valve Cover Gasket (4 bolt) 7 JF168-1130HF Valve Cover Gasket (5 bolt) 8 JF168-1120 Breather Tube 9 NOT YET IN STOCK Valve Cover Flange Bolt 10 JF168-1200 Intake Stud Bolt 11 JF168-1515 Exhaust Stud Bolt 12 NOT YET IN STOCK Dowel Pin 13 NOT YET IN STOCK Breather Tube Clip 14 NOT YET IN STOCK Cylinder Head Bolt 15 JF168-7900 Exhaust Gasket 16 JF168-1510 Exhaust Stud Flange Nuts (set of 2)


CYLINDER HEAD

1 JF168-5100 Camshaft Assembly 2 JF168.1214 Pushrod 3 JF168-1290 Rocker Arm 4 JF168-1215 Valve Lifter 5 JF168-1280 Rocker Arm Adjusting Nut 6 NOT YET IN STOCK Compression Release Return Spring 7 JF168-1230 Intake Valve 8 JF168-1240 Exhaust Valve 9 JF168-1210 Valve Spring 10 JF168-1211 Intake Valve Spring Retainer 11 JF168-1220 Exhaust Valve Spring Retainer 12 JF168-1213 Exhaust Valve Rotator Cap 13 JF168-1216 Pushrod Guide Plate 14 JF168-1270 Rocker Arm Pivot Stud Bolt 15 JF168-1217 Rocker Arm Pivot Locking Nut


CAMSHAFT & VALVE TRAIN

DP168F DUPOR 196cc O.H.V.

PART # DESCRIPTION



. : : 13

. : : DUPOR CLONE O.H.V. ENGINE (cont.)

1 JF168-1500 Crankcase Cover 2 JF168-2000 Cylinder Assembly 3 JF168-1520 Crankcase Gasket 3 JF168-1520HF Crankcase Gasket - H.F. 4 JF168-1505 Oil Fill Cap Assembly 5 NOT YET IN STOCK Oil Fill Cap Assembly 6 NOT YET IN STOCK Oil Fill Cap 7 NOT YET IN STOCK Oil Fill Cap 8 NOT YET IN STOCK Oil Fill Cap Gasket 9 NOT YET IN STOCK Oil Fill Cap Gasket 10 NOT YET IN STOCK Oil Fill Cap Gasket 11 JF169-2100 Oil Seal 12 NOT YET IN STOCK Dowel Pin 13 NOT YET IN STOCK Crankcase Cover Bolt 14 JF168-2200 Crankshaft Bearing 15 NOT YET IN STOCK Oil Drain Plug Washer 16 JF168-2600 Oil Drain Plug 17 JF168-1121 Governor Arm Shaft 18 NOT YET IN STOCK Governor Arm Locking Clip 19 NOT YET IN STOCK Governor Arm Washer


CYLINDER & SIDE COVER

1 JF168-1125 Throttle Return Spring 2 JF168-1126 Throttle Linkage Tension Spring 3 JF168-1127 Throttle Linkage Rod 4 NOT YET IN STOCK Governor Arm 5 NOT YET IN STOCK Governor Arm Bolt 6 NOT YET IN STOCK Flange Nut (6mm) 7 JF-1681010 Kill Switch 8 NOT YET IN STOCK Kill Switch Harness 9 JF168-8100 Fuel Tank Cap


MISCELLANEOUS

1 JF168-5000 Blower Housing w/ Recoil 2 JF168-1300 Recoil Starter 3 NOT YET IN STOCK Comp Shroud 4 NOT YET IN STOCK Flange Bolt (6x12) 5 NOT YET IN STOCK Flange Bolt (6x8) 6 NOT YET IN STOCK Recoil Starter Case 7 NOT YET IN STOCK Recoil Starter Spring 8 NOT YET IN STOCK Recoil Starter Reel 9 NOT YET IN STOCK Recoil Starter Handle 10 NOT YET IN STOCK Recoil Starter Rope 11 NOT YET IN STOCK Return Spring 12 NOT YET IN STOCK Starter Ratchet 13 NOT YET IN STOCK Setting Screw 14 NOT YET IN STOCK Ratchet Guide 15 NOT YET IN STOCK Friction Spring 16 NOT YET IN STOCK Flywheel Finger Guard 17 NOT YET IN STOCK Flange Bolt (6x20)


FLYWHEEL COVERS & RECOIL

1 JF168-9900 Carburetor (Ruixing) 2 NOT YET IN STOCK Float Needle Kit 3 JF168-9400 Float Assembly 4 NOT YET IN STOCK Float Bowl 5 JF168-9600 Idle Mixture Screw & Spring 6 49-999 Float Bowl O-Ring & Drain Nut 6b JF168-9991 Drain Nut & Washer 7 NOT YET IN STOCK Float Bowl Nut 8 NOT YET IN STOCK Choke Assembly 9 JF168-9200 Float Bowl O-Ring 10 NOT YET IN STOCK Throttle Stop Screw (Idle Adj.) 11 JF168-9120 Emulsion Tube 12 NOT YET IN STOCK Fuel Cup O-Ring 13 JF168-9130 Insulator Plate 14 JF168-9140 Insulator Gasket 15 JF168-1850 Air Filter Adaptor Gasket 16 JF168-1140 Carburetor Gasket 17 NOT YET IN STOCK Choke Lever 18 NOT YET IN STOCK Fuel Valve Lever 19 NOT YET IN STOCK Fuel Lever Setting Plate 20 NOT YET IN STOCK Fuel Valve Lever Spring 21 NOT YET IN STOCK Fuel Valve Gasket 22 NOT YET IN STOCK Fuel Strainer Cup 23 NOT YET IN STOCK Fuel Lever Setting Plate Screw 24 NOT YET IN STOCK Choke Lever Spring Pin 25 (SEE AFTERMARKET) Main Jet 26 NOT YET IN STOCK Pilot Jet Assembly


CARBURETOR



. : : 14

. : : CLONE / HONDA AFTERMARKET PARTS

BILLET FLYWHEELS

ARC6619 GX200 BILLET FLYWHEEL ARC6622 GX390 BILLET FLYWHEEL (with timing hub and ring gear) ARC6623 GX390 BILLET FLYWHEEL (without timing hub and ring gear)

ARC6619 ARC6622 ARC6623

HIGHLY RECOMMENDED FOR ENGINES USED FOR RECREATIONAL PURPOSES

PART # DESCRIPTION

OFFSET FLYWHEEL KEYS

OSKCL** OFF-SET KEY (each) (** Select Size) (Sizes: #1, #2, #3, #4, #5, #6, #7)

PART # DESCRIPTION

Aftermarket offset flywheel keys used to adjust the ignition timing. Sizes range is .010” - .070” in .010” increments.

AFTERMARKET VALVE SPRINGS

ARCDJ-1055 A.K.R.A. legal replacement Valve Spring DCLS2 DYNO 26LBS. Hi-Performance Valve Spring DCS-BS DYNO A.K.R.A. Legal “Trick” Valve Spring DCS-CL2 DYNO Dual Valve Springs (sold as set) WMSSCL WMS A.K.R.A. legal replacement Spring XSCL X-Caliber Hi-Perf. “Heavy Duty” Spring

PART # DESCRIPTION

Aftermarket valve springs that will fit both the Honda and Clone O.H.V. engines.

(Sold per each)

HONDA RING SETS

DJ-2291 Honda Ring Set (.010) DJ-2292 Honda Ring Set (.020)

PART # DESCRIPTION

Genuine Honda O.H.V. replacement ring sets. Also fits the Clone O.H.V. engine. Available in: +.010” & +.020”

HONDA PISTONS

DJ-2295 Honda Piston (STD) DJ-2296 Honda Piston (.010) DJ-2297 Honda Piston (.020)

PART # DESCRIPTION

Genuine Honda O.H.V. replacement pistons. Also fits the Clone O.H.V. engine. Available in: STD, +.010”, +.020”

PART # DESCRIPTION

ARC6268 GX200 Billet Rod (3.707”) Mod ARC6270 GX200 Billet Rod (3.303”) Stock ARC6271 GX200 Billet Rod (3.323) +20 Longer ARC6272 GX390 Billet Rod (4.410”)

A.R.C. billet rods, inserts, and hardware for the Clone / Honda O.H.V. engines.

BILLET RODS (CLONE)

STARTER NUT

JRSNCL CLONE STARTER NUT

PART # DESCRIPTION

Starter nut for the Clone / Honda O.H.V. engines. Designed for a 3/4” (19mm) Socket or 5/16” (8mm) hex driver.

GMCFS CLONE O.H.V. RECOIL COVER

PART # DESCRIPTION

CLONE O.H.V. RECOIL COVER

G-MAN clone o.h.v. recoil cover that fits over the recoil closing up the vents to help reduce air flow and drag and increase engine temps.

ARC6391 GX390 Rod Insert ARC6394 GX200 Rod Insert ARC6397 GX305 Rod Insert ARC6383 Rod Bolts for Clone / Honda Billet Rod

Rod Bolts and inserts for the clone billet rods.

ROD INSERTS & HARDWARE

PART # DESCRIPTION



. : : 15

. : : CLONE / HONDA AFTERMARKET PARTS (cont.)

CL1-I BOX STOCK LEGAL CAM. FOR USE IN BOX STOCK CLASSES WHERE STOCK LIFT IS REQUIRED. CL1M-I “MINUS .004 LIFT” BOX STOCK LEGAL CAM. FOR WHEN SLIGHTLY LESS LIFT IS NEEDED TO MEET TECH FOR OLDER STYLE ENGINES THAT PUSH THE LIFT LIMIT TOO CLOSE.

CS AGRESSIVE RAMP CAM. .275” LIFT @ VALVE. DURATION: 226 INTAKE / 236 EXHAUST. (STOCK CARB) CM AGRESSIVE RAMP CAM. .275” LIFT @ VALVE. DURATION: 236 INTAKE / 236 EXHAUST. (STOCK APPEARING OR TILLOTSON CARB w/ High Performance Valve Springs) CLMOD2 HOT STOCK / CHEATER CAM WITH EXTRA DURATION (246 INTAKE / 236 EXHAUST)

275CL MOD / OUTLAW .275 LIFT CAM. (Billet Flywheel, Rod, & High Performance Valve Springs Required) 308CL MOD / OUTLAW .308 LIFT CAM. (Billet Flywheel, Rod, & High Performance Valve Springs Required)

HIGH-PERFORMANCE CAMS

PART # DESCRIPTION

When using any kind of high performance aftermarket cam in any general purpose engine it is STRONGLY RECOMMENDED to use a billet rod and S.F.I. certified flywheel for safety purposes.

BURRIS GUIDE PLATE

GXC412 GX200 GUIDE PLATE

PART # DESCRIPTION

Aftermarket guide plate for the Honda & Clone O.H.V. engines. Designed for 1.3:1 rocker arms.

GXC420 GX200 BILLET ROCKER ARM SET

PART # DESCRIPTION

Aftermarket Billet Steel Rocker Arm Kit for the Honda / Clone O.H.V. engines. Features a 1.3:1 rocker arm ratio.

BURRIS BILLET ROCKER KIT

GXC408 GX200 1.3:1 ROCKER ARM (each)

PART # DESCRIPTION

Stamped rocker arm from high grade steel. 1.3:1 ratio increases valve lift by 30% over OEM rockers.

BURRIS STAMPED ROCKER ARM

GXC413-20 Chromoly Pushrod (5.175”) GXC413-10 Chromoly Pushrod (5.260”)

PART # DESCRIPTION

BURRIS CHROMOLY PUSHRODS

Burris aftermarket chromoly pushrods for the GX200 series Honda / Clone O.H.V. engines.

(Sold per each)

BURRIS VALVE UPGRADE

GXC415-25 GX200 UPGRADE KIT (25mm Intake Valve) GXC415-26 GX200 UPGRADE KIT (26mm Intake Valve)

PART # DESCRIPTION

(1) 26mm or 25mm intake valve (1) 24mm (.945") exhaust valve (2) 1.3:1 rockers (.290 lift w/ stock cam) (2) 18LBS seat pressure valve springs (2) billet retainers (2) hardened locks (2) valve stem wear caps (2) .060" valve spring shims (1) push rod guide plate

AFTERMARKET VALVE GUIDES

F21-419-00 CLONE VALVE GUIDE (.372 x 1.140) F21-419-02 CLONE VALVE GUIDE (.374 x 1.140) F21-419-04 CLONE VALVE GUIDE (.376 x 1.140)

PART # DESCRIPTION

Aftermarket brass valve guides for the Clone O.H.V. engine.

(Sold per each)

CLONE VALVE COVER

DP-362 4-Bolt Valve Cover w/ Fitting

PART # DESCRIPTION

Clone O.H.V. 4-bolt valve cover with pulse fitting already installed.



. : : 16


AFTERMARKET EXHAUST GASKET

EGBCL AFTERMARKET EXHAUST GASKET

PART # DESCRIPTION

Aftermarket exhaust gasket for the Clone O.H.V. engine.

(Sold per each)

R.L.V HEADER

5438c GX200 CLONE / HONDA HEADER

PART # DESCRIPTION

R.L.V. header that fits the Honda & Clone O.H.V. engines. 1-5/16” end. Designed for spec racing.

„BOX STOCK‟ HEADER

CM3 BOX STOCK LEGAL HEADER *NEW STYLE* CM5 BOX STOCK LEGAL FLOWED MUFFLER

PART # DESCRIPTION

A.K.R.A. Box Stock legal “wiener pipe” header and muffler. Header and muffler sold separately.

R.L.V. “MINI” MUFFLER

4117 R.L.V. “MINI” MUFFLER

PART # DESCRIPTION

R.L.V.‟s “mini” muffler designed to be a better quality alternative to the “box stock” muffler. Threaded end fits the existing box stock (CM2) header.

ROBERTSON HEADERS

HGX390M GX390 HEADER (1-5/16”) HGX390SUSM GX390 SUPER SNAKE (1-5/16”) H-S-K GX200 ZERO STAGE (1-5/16”) HCCM GX200 3-STAGE (1-5/16”)

PART # DESCRIPTION

HGX390M 390SUS H-S-K HCCM

CYLINDER HEAD STUD KIT

GXC305K GX200 CYL. HEAD STUD KIT

PART # DESCRIPTION

The GX200 Clone O.H.V. cylinder head stud kit contains four (4) each of the chromoly studs and non serrated 8mm flange nuts.

SIDE COVER STUD KIT

GXC114K GX200 SIDE COVER STUD KIT

PART # DESCRIPTION

This replaces the bolts used to attach the side cover to the block. The studs and solid dowel pins keep the side cover from moving and fracturing the gasket. Comes with (6) x 8mm studs, (6) x 8mm flange nuts, and (2) x 8mm dowel pins. A MUST HAVE FOR ENGINES PRODUCING 10+hp

SPARK PLUGS

AR3910X Autolite GX200 Honda / Clone Spark Plug W20EPRU Denso GX200 Honda / Clone Spark Plug BP6ES NGK GX200 Honda / Clone Spark Plug (equivalent to Denso W20EPRU) BP7ES NGK GX200 Honda / Clone Spark Plug (equivalent to Denso W22EPRU)

PART # DESCRIPTION

Aftermarket spark plugs that fit the Clone and Honda O.H.V. engines. (Sold Per Each)

HONDA HEAD GASKET

DJ-2312 HONDA HEAD GASKET w/ FIRE RING

PART # DESCRIPTION

Honda head gasket with fire ring (.040” thick.) (Fits the Clone O.H.V. engine).

CLONE HEAD GASKET

DJ-1312 VITON® COATED STEEL HEAD GASKET

PART # DESCRIPTION

Viton® coated steel head gasket. (.010” thick)

CERAMIC COATED HEADER

SECCP GX200 CLONE / HONDA HEADER

PART # DESCRIPTION

Ceramic coated header for the Clone O.H.V. engine.



. : : 17


DRILLED JETS

DJCL28 DRILLED JET (.028”) .71mm DJCL29 DRILLED JET (.029”) .74mm DJCL30 DRILLED JET (.030”) .75mm DJCL31 DRILLED JET (.031”) .79mm DJCL32 DRILLED JET (.032”) .81mm DJCL33 DRILLED JET (.033”) .84mm DJCL34 DRILLED JET (.034”) .85mm DJCL35 DRILLED JET (.035”) .89mm DJCL36 DRILLED JET (.036”) .91mm DJCL37 DRILLED JET (.037”) .94mm DJCL38 DRILLED JET (.038”) .96mm DJCL39 DRILLED JET (.039”) .99mm DJCL40 DRILLED JET (.040”) 1.02mm DJCL41 DRILLED JET (.041”) 1.04mm DJCL42 DRILLED JET (.042”) 1.07mm

PART # DESCRIPTION

Aftermarket drilled jets for the Clone O.H.V. engine. (Sold per each)

5010 DRILLED JET (.032”) .81mm (5 Pack) 5011 DRILLED JET (.034”) .85mm (5 Pack) 5012 DRILLED JET (.036”) .91mm (5 Pack) 5013 DRILLED JET (.038”) .96mm (5 Pack) 5014 DRILLED JET (.039”) .99mm (5 Pack) 5015 DRILLED JET (.040”) 1.02mm (5 Pack) 5016 DRILLED JET (.041”) 1.04mm (5 Pack) 5017 DRILLED JET (.042”) 1.07mm (5 Pack) 5018 DRILLED JET (.043”) 1.09mm (5 Pack) 5019 DRILLED JET (.044”) 1.12mm (5 Pack) 5020 DRILLED JET (.045”) 1.14mm (5 Pack) 5021 DRILLED JET (.046”) 1.17mm (5 Pack)

PART # DESCRIPTION

Aftermarket drilled jets for the Clone O.H.V. engine. (5 Packs)

R.L.V. DRILLED JETS

JET BLOCK

AJBCL CLONE JET BLOCK (jets NOT included) AJBCLWJ CLONE JET BLOCK (jets included: .028, .030, .032, .034, .036, .038, .040, .042)

PART # DESCRIPTION

Billet aluminum block designed to hold the jets keeping them from loosely rattling around in the toolbox.

THROTTLE LINKAGE KITS

KM194 CLONE THROTTLE KIT (can be used with stock tank) KMBTKTCL TILLOTSON CARB THROTTLE KIT

PART # DESCRIPTION

KM194 CK118 KMBTKTCL

TOP PLATES

WMSTP-1146 (Yellow) Dupor & Old Style Blue Clone WMSTP-1147 „09 Harbor Freight Clone ARCDJ-1148 Early „09 Homier Blue Max (pre 4/28/09) WMSTP-1149 Late „09 Homier Blue Max (after 5/1/09)

PART # DESCRIPTION

Provides space for fuel pump mounting and includes a solid throttle linkage assembly. (Used in place of the stock tank)

(Hardware Included)

RESTRICTOR PLATES

ARCDJ-1375 RESTRICTOR PLATE, RED (.375”) ARCDJ-1425 RESTRICTOR PLATE, SILVER (.425”) ARCDJ-1500 RESTRICTOR PLATE, PURPLE (.500”) ARCDJ-1550 RESTRICTOR PLATE, BLUE (.550”)

PART # DESCRIPTION

Restrictor plates for the Clone O.H.V. engine.

CHOKE HOLD BRACKET

ARCDJ-1257 CLONE CHOKE BRACKET

PART # DESCRIPTION

Holds the choke lever on after removing plastic control covers. Works with #CP200KB, #ARC6934, & #HCFA adapters.

FILTER ADAPTERS

CP200KB SOX RACING VELOCITY STACK (choke hold bracket included) ARC6934 ARC FUNNELLED FILTER ADAPTER (choke hold bracket included) HCFA ALUMINUM DISHED FILTER ADAPTER KM195 STAMPED FILTER ADAPTER

PART # DESCRIPTION

CP200KB HCFA KM195 ARC6934

A.R.C. INTAKE MANIFOLD

ARC6876 GX200 TILLOTSON MANIFOLD

PART # DESCRIPTION

A.R.C. Aluminum intake manifold to fit a Tillotson carburetor. 2” x 1.00” dia.

“TRICK” EMULSION TUBE

ARCDJ-1251 TRICK EMULSION TUBE

PART # DESCRIPTION

This e-tube has a slightly larger main bore and fewer air bleed holes providing a better fuel signal to the jet.



. : : 18

. : : GENERAL ENGINE PARTS & ACCESSORIES (cont.)

HL334WXA TILLOTSON CARB (Clone / O.H.V.) HL348F HL304 CONVERTED TO ALKY (1.00” BORE)

PART # DESCRIPTION

TILLOTSON CARBURETORS & PARTS

RK-104HLR REBUILD KIT LP102 TILLT. CARB DIAPHRAGM REBUILD KIT TBS TILLOTSON BRASS SCREEN TCG TILLOTSON CORK GASKET TFA TILLOTSON FULCRUM ARM TFAS TILLOTSON FULCRUM ARM SPRING 43-966 MIXTURE NEEDLE, HI-SPEED (HL348F) 43-967 MIXTURE NEEDLE, HI-SPEED (HL357A) ... LO-SPEED (HL348F / HL380) 43-388 MIXTURE NEEDLE, LO-SPEED (HL357) 43-988 MIXTURE NEEDLE, HI-SPEED (HL380) TNO TILLOTSON MIXTURE NEEDLE O-RING TNS TILLOTSON MIXTURE NEEDLE SPRING TNW TILLOTSON MIXTURE NEEDLE WASHER TNSK TILLOTSON NEEDLE SEAT KIT (captured) TNSKS TILLOTSON NEEDLE SEAT KIT (un-captured) TPS TILLOTSON PUMPER SCREW TTC TILLOTSON BLUE TOP CAP TTCS TILLOTSON BLUE TOP CAP SCREW TTS TILLOTSON THROTTLE SHAFT TWP TILLOTSON WELCH PLUG

HL348FA FILTER ADAPTER FOR HL348F CARB

PART # DESCRIPTION

FUEL PUMPS

LP425 MIKUNI SINGLE OUTLET CAST FUEL PUMP LP427 MIKUNI DUAL OUTLET CAST FUEL PUMP WPC11 WALBRO SINGLE OUTLET FUEL PUMP WMSWFP WMS PLASTIC “SQUARE” FUEL PUMP

LP449 LP425 FUEL PUMP REBUILD GASKET KIT LP450 LP427 FUEL PUMP REBUILD GASKET KIT

WBK210 WALBRO „WIP-22‟ FUEL PUMP REBUILD KIT

LP425 LP427 WMSWFP WPC11

JRTM2** 2” MANIFOLD, FLATHEAD (.890” or 1.00”) JRTM3** 3” MANIFOLD, FLATHEAD (.890” or 1.00”) JRTM2A 2” MANIFOLD, ANIMAL (.856”) ARC6876 HONDA / CLONE MANIFOLD (fits HL348F) ECCI E.C. ALUMINUM MANIFOLD (for HL334WXA)

(Comes with studs, nuts, pulse fitting, & gasket)

PART # DESCRIPTION

ALUMINUM CARB MANIFOLDS

Carburetor manifolds for the Tillotson carb.

(HONDA / Clone manifold pictured)

FOAM PRE FILTERS

UIPF FOAM PRE FILTER 3-1/2 X 5 UIPF8 FOAM PRE FILTER 3-1/2 X 8 UIPF454 FOAM PRE FILTER 4-1/2 X 5 HFF FOAM FILTER - HONDA ENGINE

PART # DESCRIPTION

Foam pre filter designed to aide the air filter in preventing dirt from getting into the engine.

OUTERWEARS® PRE FILTERS

PART # DESCRIPTION

OWPF80** FOR AFRR80 & AFR 175 OWPF83** FOR AFR83 OWPF100** FOR AFR100 OWPF110** FOR AFR110 OWPF177** FOR AFR177 OWPF179** FOR AFR179

OUTERWEARS® stretches over the existing air filter to help prevent dirt and debris from passing through into the engine. Can be washed with soap and water. (Blue, Black, Red, Yellow)

FABRIC AIR FILTERS

AFR80 3-1/2 X 4 INCH 2-7/16” STRAIGHT AFR175 3-1/2 X 4 INCH 2-7/16” 20° ANGLED AFR177 3-1/2 X 6 INCH 2-7/16” 20° ANGLED AFR179 3-1/2 X 8 INCH 2-7/16” 20° ANGLED AFR83 4-1/2 X 4 INCH 2-7/16” STRAIGHT

PART # DESCRIPTION

Fabric air filters with a 2-7/16” center ID. Hose clamp included.

R2C PERFORMANCE AIR FILTERS

PART # DESCRIPTION

CY10505 4.25" x 4" (2-7/16" I.D.) 20* FLANGE CY10706 4.25" x 4" (2-7/16" I.D.) STRAIGHT FLANGE CY10802 Animal Filter 3" x 4" (1.25" I.D.) 20* FLANGE CY10803 Animal Filter 3" x 5" (1.25" I.D.) 20* FLANGE

Specifically designed to stop more dirt and make more horsepower than competitive air filters as they begin to collect dust.

Unmatched Engine Protection for Kart engines Durable hex filter screen for maximum durability! No Air Filter OILING! WKA Approved

R2C0210A7 PRE FILTER (fits CY10505 & CY10706) R2C0210A21 PRE FILTER (fits CY10802) R2C0210A22 PRE FILTER (fits CY10803)

“QUALIFYING” FILTER

AFR83Q 4-1/2 X 4 INCH 2-7/16” STRAIGHT

PART # DESCRIPTION

An air filter built with the top cut out to increase air flow. 2-7/16” center ID straight flange. Hose clamp included.

TC THROTTLE CABLE (3/16” ball end) TCI THROTTLE CABLE (barrel end)

PART # DESCRIPTION

THROTTLE CABLES

Throttle cables available with a ball end (#TC) or barrel end (#TCI).



. : : 19


FLOR FUEL LINE, ORANGE (50‟) FLR FUEL LINE, RED (50‟) FLB FUEL LINE, BLUE (50‟) FLY FUEL LINE, YELLOW (50‟) FLC FUEL LINE, CLEAR (50‟) FLP FUEL LINE, PURPLE (50‟) TFLY TYGON® FUEL LINE (1/4” x 50‟) TFLYFT TYGON® PULSE LINE (3/16” x per foot)

PART # DESCRIPTION

FUEL LINE

1/4” ID fuel line in 50‟ rolls. Choice of six (6) different colors.

Also available is the popular TYGON® brand fuel line.

FFST SMALL FUEL FILTER (2-1/8”) FFL LARGE FUEL FILTER (3-3/4”)

PART # DESCRIPTION

IN-LINE FUEL FILTERS

Nylon fuel filters in both SMALL (2-1/8” long) and LARGE (3-3/4” long).

FLCP REUSABLE NYLON FUEL LINE CLAMP FLYF NYLON Y - fitting (1/4”) FLTF NYLON T - fitting (1/4”)

PART # DESCRIPTION

FUEL LINE CLAMP & FITTINGS

Reusable nylon fuel line clamp, nylon T-fitting, and nylon Y-fitting. For 1/4” ID fuel line. (sold separately)

GMFTP G-MAN PLASTIC PETCOCK

PART # DESCRIPTION

G-MAN FUEL TANK PETCOCK

G-MAN replacement fuel tank plastic petcock.

GMFTC G-MAN PLASTIC FUEL TANK CAP

PART # DESCRIPTION

G-MAN FUEL TANK CAP

Replacement cap for G-MAN fuel tanks.

PART # DESCRIPTION

GMFT2 G-MAN PLASTIC FUEL TANK (2 quart) GMFT3 G-MAN PLASTIC FUEL TANK (3 quart) (upright) GMFT4 G-MAN PLASTIC FUEL TANK (4 quart) GMFT4U G-MAN PLASTIC FUEL TANK (4 quart) (upright) VKA4011 ALUMINUM FUEL TANK (2 quart) VKA4012 ALUMINUM FUEL TANK (4 quart)

FUEL TANKS

GMFT2 GMFT3

GMFT4 VKA4011 / VKA4012

GMFT4U

CATCH TANKS

CCT CALIPER CATCH TANK Designed to mount on the brake caliper. Includes (3) fittings and (1) drain petcock.

WACC WILLIAMS ALUMINUM CATCH TANK Aluminum catch tank with hose clamps. Perfect to mount conveniently on a seat strut.

GMCTS G-MAN PLASTIC CATCH TANK Made of the same material as the fuel tanks. This tank comes with a bracket mount on the back side. Includes bracket, (2) fittings, and (1) petcock

GMCTM G-MAN PLASTIC „MODIFIED‟ CATCH TANK Larger volume capabilities for MOD or OUTLAW engines that throw out a lot of excess oil. Includes (1) foam filter, (2) mounting screws, (3) 1/4” fittings, (3) 3/8” fittings, & (1) petcock

PART # DESCRIPTION

CCT WACC GMCTS GMCTM

ALUMINUM PULSE FITTING

APF ALUMINUM PULSE FITTING (Includes O-ring seal)

Billet aluminum crankcase pulse fitting. Replaces oil-fill plug to allow the fuel pump to pulse off the crankcase pressure. Fits all Briggs engine crankcase covers.

PART # DESCRIPTION

LNFTS ALUMINUM FUEL TANK STRAP

PART # DESCRIPTION

LEATHERNECK FUEL TANK STRAP

Aluminum mounting strap that fits the G-Main 2qt. tank. Comes pre drilled, bent, and with a foam pad.



. : : 20

. : : GENERAL ENGINE PARTS & ACCESSORIES

OSK** OFF SET TIMING KEYS - EACH (**specify size) (#2, #3, #4, #5, #6, #7, #8)

PART # DESCRIPTION

OFF-SET TIMING KEYS

Off-set timing keys for the Briggs Flathead or Animal engine. Sizes ranging from .020” - .080” in .010 increments.

SPIW Spark Plug Index Washers

PART # DESCRIPTION

SPARK PLUG INDEX WASHERS

Package of 30 copper index washers. Washers are .012 thick and turn the plug roughly a 1/4 turn each.

PART # DESCRIPTION

YAMAHA KT100 SPARK PLUGS

W22ESU STANDARD TIP SPARK PLUG W24ESU STANDARD TIP SPARK PLUG W27ESU STANDARD TIP SPARK PLUG W31ESU STANDARD TIP SPARK PLUG

Spark plugs for the Yamaha KT100 engine.

6487 LONGACRE BLACK HEADER WRAP

PART # DESCRIPTION

LONGACRE HEADER WRAP

Longacre black header wrap. (2” x 50‟) bulk roll.

WKAS1 R.L.V. (1”) STOCK CLASS SILENCER WKAS1125 R.L.V. (1-1/8”) STOCK CLASS SILENCER WKAS1516 R.L.V. (1-5/16”) STOCK CLASS SILENCER WKAM R.L.V. (1-5/16”) MODIFIED CLASS SILENCER

4117 R.L.V. B-91 CLONE “MINI” MUFFLER

RSC1 R.L.V. (1”) SILENCER CLAMP RSC118 R.L.V. (1-1/8”) SILENCER CLAMP RSC1516 R.L.V. (1-5/16”) SILENCER CLAMP

RLVSS1 R.L.V. (1”) SILENCER SHIM RLVSS1125 R.L.V. (1-1/8”) SILENCER SHIM RLVSS1516 R.L.V. (1-5/16”) SILENCER SHIM P-COF ROBERTSON (1-5/16”) TRUMPET END (clamp or weld on)

PART # DESCRIPTION

EXHAUST SILENCERS & ACCESSORIES

PART # DESCRIPTION

ACGS ALUMINUM SHIELDED CHAIN GUARD Has a extended shield to help protect the driver‟s arm against heat from the engine. Fits most industrial general purpose lawn & garden engines.

CGS STEEL CHAIN GUARD Steel chain guard. Fits most industrial general purpose lawn & garden engine.

ARCDJ-1415 „CLONE‟ SHIELDED CHAIN GUARD This chain guard, though still fits most industrial general purpose small engines, was intended for the Honda / Clone engines where the exhaust header comes out at an angle towards the driver. An extended shield that wraps around the header helps protect the driver from excessive heat from the exhaust.

CHAIN GUARDS & BOLT KITS

CGS ARCDJ-1415 ACGS

CGBK (S.A.E.) CHAIN GUARD BOLT KIT (pair) DP-149 (METRIC) CHAIN GUARD BOLT KIT (pair)

CLOSED FLYWHEEL SCREENS

GMPFSA PLASTIC ANIMAL FLYWHEEL SCREEN No vent holes (Black only) AFSA ALUMINUM ANIMAL FLYWHEEL SCREEN No vent holes (Silver Only)

PART # DESCRIPTION

Flywheel screens in either Plastic or Aluminum with no vent holes for minimum airflow and drag. Fits all Briggs engines and most any general purpose small engine.

OPEN FLYWHEEL SCREENS

AFS** Aluminum Flywheel Screen (**Specify color: Silver, Black, Red, Gold, Blue) PFS** Plastic Flywheel Screen (**Specify color: Black, Red, Blue, Orange, Yellow)

PART # DESCRIPTION

Flywheel screens in both Plastic or Aluminum. Vent holes for good airflow and cooling. Fits all Briggs engines and most any general purpose small engine.



. : : 21


PART # DESCRIPTION

PM-034** MOTOR MOUNT - AMERICAN RAIL **Available in 15°, 5° or flat PM-036** MOTOR MOUNT - INTERNATIONAL RAIL **Available in 15°, 5° or flat

PM-034-15-305 305 / GX390 MOTOR MOUNT - AMER. RAIL ** Available in 15° (Fits 305 Briggs & GX390) PM-036-15-305 305 / GX390 MOTOR MOUNT - INT. RAIL

** Available in 15° (Fits 305 Briggs & GX390)

PM-001 MOTOR PLATE ONLY - STD. PM-36MP-305 MOTOR PLATE ONLY - 305/390 BIG BLOCK

PM-IC BILLET CLAMPS - INTERNATIONAL (set) PM-AC BILLET CLAMPS - AMERICAN (set)

P.M.I. MOTOR MOUNTS

Performance Manufacturing motor mounts available in 15°, 5°, or 0°. Fits most Industrial Lawn & Garden Small Engines. (Black Only)

BRA7 (7°) BLACK RHINO MOTOR MOUNT AMERICAN Rail BRI7 (7°) BLACK RHINO MOTOR MOUNT INTERNATIONAL Rail BRMMCA BLACK RHINO MOUNT CLAMPS (American) BRMMCI BLACK RHINO MOUNT CLAMPS (International)

(CLAMPS SOLD PER SET- BOLTS

PART # DESCRIPTION

BLACK RHINO MOUNTS

Black Rhino motor mounts in 7° only. Fits most Industrial Lawn & Garden Small Engines.

(Black Only)

RKMM15 (15°) RAGE KARTS MOTOR MOUNT RKMM (5°) RAGE KARTS MOTOR MOUNT RMMC RAGE KARTS MOTOR MOUNT CLAMPS

PART # DESCRIPTION

RAGE MOTOR MOUNTS

Motor mounts by Rage Karts. Specifically designed to fit their unique frame rail spacing

(Black Only)

BMC543 15° COMBO MOUNT KIT - AMERICAN (subplate, motor plate, clamps & hardware) BMC544 15° COMBO MOUNT KIT - INTERNATIONAL (subplate, motor plate, clamps & hardware) BMC546 5° COMBO MOUNT KIT - INTERNATIONAL (subplate, motor plate, clamps & hardware)

BMC540 SUBPLATE 15° - AMERICAN BMC541 SUBPLATE 15° - INTERNATIONAL BMC592 SUBPLATE 5° - AMERICAN BMC593 SUBPLATE 5° - INTERNATIONAL BMC558 SUBPLATE 0° (flat) - INTERNATIONAL BMC542 MOTOR PLATE ONLY - STD. BMC547A MOTOR PLATE 305/390 BMMC-I MOUNT CLAMP - INTERNATIONAL (each) BMMC-A MOUNT CLAMP - AMERICAN (each)

PART # DESCRIPTION

BURRIS MOTOR MOUNTS

Burris Racing motor mounts. Fits: 1-1/8, 1-1/4, 28mm, 30mm, & 32mm rails

2PM** (15°) TWO PIECE MOUNT (specify American or International rails) 2PMF** (0°) TWP PIECE MOUNT (specify American or International rails) MMCA BUTTERFLY CLAMP - AMERICAN (each) MMCI BUTTERFLY CLAMP - INTERNATIONAL (each)

PART # DESCRIPTION

TWO PIECE BILLET MOUNTS

Two piece motor mounts. CNC machined out of billet aluminum. Available in either 15° or 0°. Fits most Industrial Lawn & Garden Small Engines.

FEL-PRO GASKETS

FPS10001 .048 steel core head gasket, graphite faced FPS10002 .032 copper head gasket, large valve reliefs FPS10004 .049 graphite core head gasket, steel face FPS10006 .043 copper head gasket, large valve reliefs FPS20003 .015 breather gasket, rubber coated metal FPS30001 .045 intake gasket, stock port, hi-perf. paper FPS62001 .015 crankcase gasket, paper coated (10 PACK) FPS62002 FPS20002 (10 PACK) FPS62003 FPS20003 (10 PACK)

PART # DESCRIPTION

Aftermarket performance gaskets for the Briggs flathead engine.

FEL-PRO GASKETS

FPS30004 .045 intake gasket, large port, hi-perf. paper FPS63004 FPS30004 (10 PACK) FPS30008 .010 diaphragm gasket FPS63008 FPS30008 (10 PACK) FPS64001 FPS40001 (10 PACK) FPS62007 .045 breather gasket, hi-perf, paper (10 PACK) FPS63006 Tillotson Carb to Intake gasket, KEVLA w/ silicone coating, 1.050” port (10 PACK) FPS63009 Intake Manifold gasket, steel core laminate w/ silicone coating (10 PACK) FPS67001 PTO seal (.770” ID) (10 PACK) FPS67002 PTO seal (1.0” ID) (10 PACK) FPS67003 MAG seal (.845” ID) (10 PACK)

PART # DESCRIPTION

Aftermarket performance gaskets for the Briggs flathead engine.



. : : 22

. : : CLUTCHES

BULLY CLUTCHES by BULLER

One of the more popular disc clutches on the market today. The Bully Clutch by Buller Built, Inc. boasts the highest of quali-ties in both design and performance. This clutch is not only fast, but is also extremely tough.

Pre-adjusted class specific clutches from factory

Adjustable 6 or 4 spring configurations

8-tab high performance friction discs

Removable clutch driver

Vented clutch driver basket

FEATURES

CLUTCHES

BC1D6 1-Disc / 6-Spring (Junior 1) BC2D 2-Disc / 4-Spring (Adult Animal) BC2D6 2-Disc / 6-Spring (Adult / Junior 2) BC2DJR1 2-Disc / 6-Spring (Junior 1) BC3D 3-Disc / 4-Spring (Junior Animal) BC3D6 3-Disc / 6-Spring (Adult Animal)

BCTURBO 1” TURBO Clutch, 4-Disc / 6-Spring (15t)

PART # DESCRIPTION

BULLY INTERCHANGEABLE CLUTCH DRIVERS

BCD**B Bully Clutch Driver (removable bearing) (** Specify Size: 12tooth - 16tooth) BCD** Bully Clutch Driver (** Specify Size: 17tooth - 19tooth) BCD11 Bully Clutch Driver (11t) BCD**STAR Bully 1” TURBO Clutch Driver (** Specify Size: 14t - 19t)

PART # DESCRIPTION

CLUTCH PARTS

BC2DDH Bully Clutch 2-Disc Drive Hub BCAP4 Bully Clutch Activator Plate (4-spring) BCAP6 Bully Clutch Activator Plate (6-spring) BCSB2D Aftermarket Steel Clutch Basket (2-Disc) BCB1D Bully Aluminum Clutch Basket (1-Disc) BCB2D Bully Aluminum Clutch Basket (2-Disc) BCB3D Bully Aluminum Clutch Basket (3-Disc) BCDB Bully Clutch Driver Removable Bearing BCDP4 Bully Clutch Lever Dowel Pin (4-spring) BCDP6 Bully Clutch Lever Dowel Pin (6-spring) BCFD Bully Clutch OEM Friction Disc BCFP065 Bully Clutch Floater Plate (.065) BCFP075 Bully Clutch Floater Plate (.075) BCFP085 Bully Clutch Floater Plate (.085) BCFP095 Bully Clutch Floater Plate (.095) BCFP100 Bully Clutch Floater Plate (.100) BCK Bully Clutch Key

PART # DESCRIPTION

BCOTW Bully Cutch Outer Thrust Washer BCPP4 Bully Clutch Pressure Plate (4-spring) BCPP6 Bully Clutch Pressure Plate (6-spring) BCSB Bully Clutch Spring (.085) (Black) BCSR Bully Clutch Spring (.090) (Red) BCSBL Bully Clutch Spring (.100) (Blue) BCSN Bully Clutch Spring Adjuster Nut BCSNL Bully Clutch Spring Adjuster Nut (4-Spring) BCSNR Bully Clutch Snap Ring BCTTW Bully Clutch THIN Thrust Washer BCWLS Bully Clutch Weight Lever (1 Hole) BCWL Bully Clutch Weight Lever (2 Hole) SMCFD8 SMC/BULLY/JAMMER Friction Disc (8-tab) BCKSTAR 1” TURBO CLUTCH KEY BCTWSTAR 1” TURBO THRUST WASHER BCTBSTAR 1” TURBO THRUST BEARING

PART # DESCRIPTION



. : : 23

. : : CLUTCHES (continued)

NORAM „GE‟ SERIES CLUTCH

NARC11 GE Series (11t) (Light Shoe Only) NARC** ** GE Series (12t - 17t) (Light or Heavy Shoes) (** specify tooth size and shoe weight) NARC** ** GE Series (18t - 21t) (Light or Heavy Shoes) (** specify tooth size and shoe weight)

PART # DESCRIPTION

NAD** GE SERIES DRUM (11t through 13t) (** specify size) NAD** GE SERIES DRUM (14t through 17t) (** specify size) NAD** GE SERIES DRUM (18t through 21t) (** specify size) NAS** NORAM SPRING (**specify color) (Black, Brown, Brown (Big), Green, Orange, Orange (Big), Purple, Red, Red (Big), White, Yellow) NASL NORAM LIGHT WEIGHT SHOE NASH NORAM HEAVY WEIGHT SHOE NSR NORAM SNAP RING NADH11 NORAM DRIVE HUB (11t) NADH12 NORAM DRIVE HUB (12t - 21t) NANB NORAM NEEDLE BEARING (13t- UP) NAB11 NORAM BUSHING (11t) NAB12 NORAM BUSHING (12t) NCK NORAM CLUTCH KEY NAFW NORAM FIBER WASHER 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER

NACC NOR-AM “CHEETAH” CLUTCH (comes with 13, 14, and 15 tooth drivers)

NORAM „CHEETAH‟ CLUTCH

PART # DESCRIPTION

NACCB CHEETAH CLUTCH ALUMINUM BASKET NAC249 CHEETAH / GREASE LIGHTNING FRICTION DISCS

NORAM „ARENA‟ CLUTCH

(other parts are same as „GE‟ series clutch)

NAAD** NORAM ARENA TURNED DRUM (** specify size 9 or 10 tooth) NAAB9 NORAM ARENA DRUM BUSHING (9t) NAADH NORAM ARENA DRIVE HUB NAACS NORAM ARENA CLUTCH SPACER NAASW NORAM ARENA STEEL WASHER NAAFW NORAM ARENA FIBER WASHER

PART # DESCRIPTION

NAAC** NORAM ARENA CLUTCH (** specify size 9 or 10 tooth)

SMC**P PREMIER CLUTCH DRIVERS #35 (12t - 18t) (** specify size) SMC**P PREMIER CLUTCH DRIVERS #35 (19t - 20t) (** specify size) SMC219** PREMIER CLUTCH DRIVERS #219 (15t - 26t) (** specify size)

PREMIER ‟STINGER‟ CLUTCH

SCD PREMIER STINGER DRUM (less driver) SCDH PREMIER STINGER DRIVE HUB SCSP** PREMIER STINGER SPRING (** specify color) (Black, Blue, Green, Orange, Purple, White, Yellow) SCSH PREMIER STINGER CLUTCH SHOE SCDSR PREMIER STINGER DRIVER SNAP RING SCTB PREMIER STINGER THRUST BEARING SCTW PREMIER STINGER THRUST WASHER SCCSR PREMIER STINGER CARTRIDGE SNAP RING SCH PREMIER STINGER CLUTCH HUB 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER

PART # DESCRIPTION

SC** PREMIER STINGER CLUTCH (** specify size)

PREMIER ‟TITAN‟ CLUTCH

TCAB PREMIER TITAN DRUM BASKET (less driver) TCS** PREMIER TITAN SPRING (** specify color) (Blue, Green, Orange, Red, Yellow) TCK PREMIER TITAN CLUTCH KEY TCH PREMIER TITAN CLUTCH HUB TCSH PREMIER TITAN CLUTCH SHOE TCASR PREMIER TITAN ASSY. (INNER) SNAP RING TCCO PREMIER TITAN CARTRIDGE 3/4”, ORANGE TCCY PREMIER TITAN CARTRIDGE 3/4”, YELLOW 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER

PART # DESCRIPTION

TCA** PREMIER TITAN CLUTCH (** specify size)



. : : 24


HORSTMAN MDC CLUTCH DIAGRAM

HORSTMAN G/L CLUTCH DIAGRAM

** NOTE: THE GREASE LIGHTNING & MDC CLUTCH HAS BEEN DISCONTINUED ** (HOWEVER, REPLACEMENT PARTS ARE STILL AVAILABLE)

FOR ALL OTHER GREASED LIGHTNING PARTS, SEE

MDC CLUTCH SERIES PARTS

HORSTMAN GREASE LIGHTNING PARTS

5 GLB ALUMINUM BASKET, RED (2 Disc) 5 GLBJR ALUMINUM BASKET, BLUE (1 Disc) 5 GLSB STEEL BASKET (2 Disc) 8 GLFD FRICTION DISC 11 GLWL LEVER, LESS HARDWARE 13 GLWK WEIGHT KIT 14 GLLS LEVER SUPPORT 6 GLTB INNER THRUST BEARING 6A GLITW INNER THRUST WASHER 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER

REF. PART # DESCRIPTION

HORSTMAN MDC SERIES PARTS

21 4414 CLUTCH DRUM, 14 TOOTH 21 4415 CLUTCH DRUM, 15 TOOTH 21 4417 CLUTCH DRUM, 17 TOOTH 21 4418 CLUTCH DRUM, 18 TOOTH 21 4419 CLUTCH DRUM, 19 TOOTH 21 4421 CLUTCH DRUM, 21 TOOTH 1 4630 SNAP RING 2 4631 OUTER THRUST WASHER, 12t - 13t 2 4632 OUTER THRUST WASHER, 14t - 21t 3 4634 12T & 13T CLUTCH DRUM BRONZE BUSHING 3 4635 14T-UP CLUTCH DRUM NEEDLE BEARING 3 4636 11T CLUTCH DRUM BRONZE BUSHING 5 4637 INNER THRUST WASHER 6 4638 SPLINED DRIVE HUB 7 4640 STD. MDC FRICTION DISC 8 4641 FLOATER PLATE, (.075) 8 4642 FLOATER PLATE, (.085) 8 4643 FLOATER PLATE, (.095) 8 4644 FLOATER PLATE, (.105) 8 4645 FLOATER PLATE, (.065) 9 4646 PRESSURE PLATE 9 4646-4 PRESSURE PLATE, 4 SPRING 11 4647 LEVER, WEIGHTED 12 4648 LEVER SUPPORT-6 SPRING 12 4648-4 LEVER SUPPORT-4 SPRING 13 4649 SPRING, RED, MODIFIED 13 4650 SPRING, BLACK, STOCK 4651 CLUTCH KEY 4656 OUTBOARD MOUNTING KIT 14 3347 SPRING RETAINER 15 3348 ADJUSTING SCREW 3331 CLUTCH TOOL, 4 SPRING (Red) 3332 CLUTCH TOOL, 6 SPRING (Blue) 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER

REF. PART # DESCRIPTION

HORSTMAN „REAPER‟ CLUTCH

RCD** REAPER CLUTCH DRIVER 12T - 23T (** specify size) RCSB REAPER STEEL BASKET RCSP REAPER CLUTCH SPACER RCFD REAPER FRICTION DISC RCF065 REAPER FLOATER PLATE (.065) RCF075 REAPER FLOATER PLATE (.075) RCF085 REAPER FLOATER PLATE (.085) RCF095 REAPER FLOATER PLATE (.095) RCF105 REAPER FLOATER PLATE (.105) RCPP REAPER PRESSURE PLATE RCDH REAPER DRIVE HUB RCLS REAPER LEVER SUPPORT RCWL REAPER WEIGHT LEVER RCBK REAPER BOLT KIT RCCS REAPER CRANK SPACER RCCW REAPER CRANK WASHER RCDI REAPER BASKET INSERT KIT RCDPS REAPER DRIVE PLATE SCREW RCDS REAPER DRIVER SCREW 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER RCW REAPER CLUTCH WRENCH (purple)

RC** REAPER CLUTCH 12T - 23T (** specify size) RC11 REAPER CLUTCH 11T

PART # DESCRIPTION

HORSTMAN „X5‟ CLUTCH

X5FD X5 CLUTCH FRICTION DISC X51CB X5 CLUTCH BASKET - SINGLE DISC X52CB X5 CLUTCH BASKET - 2 DISC X5DH X5 DRIVE HUB X5JRDH X5 JUNIOR DRIVE HUB X5FP075 X5 FLOATER PLATE - (.075) X5FP085 X5 FLOATER PLATE - (.085) X5FP095 X5 FLOATER PLATE - (.095) 34CS .090” x 3/4” CRANKSHAFT CLUTCH SPACER X5CW X5 CLUTCH WRENCH (gold)

X5C** HORSTMAN X5 CLUTCH - JR (** specify size) X5C2D** HORSTMAN X5 CLUTCH 2 DISC - SR (** specify size) X5C2D11 HORSTMAN X5 CLUTCH 2 DISC 11T

PART # DESCRIPTION



. : : 25


. : : AFTERMARKET CLUTCH DRIVERS

WMS AFTERMARKET CLUTCH DRIVERS (LARGE)

GLD11W WILLIAMS AFTERMARKET CLUTCH DRIVER (11T) GLD**W WILLIAMS AFTERMARKET CLUTCH DRIVER (** Specify size) (Available in 12t through 23t)

Large style that fits the HORSTMAN Grease Lightning clutch. (Available in 11T - 23T)

PART # DESCRIPTION

WMS AFTERMARKET CLUTCH DRIVERS (SMALL)

Small style that fits the SMC, BULLER, JAMMER, and PREMIER brand clutches. (Available in 11T - 22T)

SMC11 WILLIAMS AFTERMARKET CLUTCH DRIVER (11T) SMC** WILLIAMS AFTERMARKET CLUTCH DRIVER (** Specify size) (Available in 12t through 22t)

PART # DESCRIPTION

MAX-TORQUE CLUTCHES

Max-Torque Clutches comes in two styles: Clone & Fun Kart (Std.) The Fun Kart clutch works great for recreational

or low horsepower applications.

The Clone clutch comes with a stiffer retaining spring and is designed to

engage at 2900 - 3200rpm.

MTCC10 Max-Torque CLONE Clutch (10t & 11t) MTCC** Max-Torque CLONE Clutch (12 thru 18) MTCC** Max-Torque CLONE Clutch (19 &20)

PART # DESCRIPTION

FKC** Max-Torque STD Clutch (12t & 13t) FKC15 Max-Torque STD Clutch (15t) FKC** Max-Torque STD Clutch (17t & 18t) FKC19 Max-Torque STD Clutch (19t)

PART # DESCRIPTION

PART # DESCRIPTION

MTD10 Clutch Driver (10t) MTD** Clutch Driver (11t & 13t) MTD** Clutch Driver (14t - 15t) MTD** Clutch Driver (16t, 17t & 18t) MTD** Clutch Driver (19t - 21t) (** Specify Driver Size) MTDRUM10 Clutch Drum (10t only) (less driver) MTDRUM11 Clutch Drum (11t only) (less driver) MTDRUM12 Clutch Drum (12t only) (less driver) MTDRUM13 Clutch Drum (13t - up) (less driver)

MTBP Clutch Backing Plate MTB12 Clutch Bushing (12t & up) MTDSR Clutch Driver Snap Ring MTDH Clutch Drive Hub MTHSR Clutch Hub Snap Ring MTSH Clutch Shoe MTSRP Clutch Shoe Retainer Plate MTCSB Clutch Spring - Heavy (Black) MTCSG Clutch Spring - Medium (Green) MTCSS Clutch Spring - Stock (Silver) MTFW Clutch Fiber Washer 34CS .090” x 3/4” Crankshaft Clutch Spacer



. : : 26

. : : ENGINE & CLUTCH OIL

. : : OILS & CLEANERS

ABOVE PRICES IN FULL CASES PER GALLON BROKEN CASES ADD $1.00 PER GALLON

COOL POWER COMES 4 GALLONS PER CASE

* Available in total synthetic (green) or a blend of castor and synthetic oils (gold). * Will mix with methanol or gasoline * Total clean synthetic oil - leaves no residue * Cleanest burning castor available

PART # DESCRIPTION

CPLGG 4-CYCLE LITE (GREEN) CPMGG 4-CYCLE MED (GREEN) CPHGG 4-CYCLE HVY (GREEN)

CPLGOG 4-CYCLE LITE (GOLD) CPMGOG 4-CYCLE MED (GOLD) CPHGOG 4-CYCLE HVY (GOLD)

COOL POWER RACING OIL

CPXG COOL POWER EXTREME OIL (quart)

PART # DESCRIPTION

ABOVE PRICES IN FULL CASES PER QUART BROKEN CASES ADD $ .25 PER QUART

F.H.S NOW COMES IN 12 QUARTS PER CASE

F.H.S. Supply & Manufacturing, Inc. has been specializing in cutting edge racing oils & fuels for over 40 years. F.H.S. Superior Racing Oils & Fuels are the ULTIMATE in power, performance, and protection, making them one of the best on the market.

FHSHL HURRICANE (LITE) FHSHM HURRICANE (MEDIUM) FHSHH HURRICANE (HEAVY)

FHSCL CYCLONE XTC (LITE) FHSCM CYCLONE XTC (MEDIUM) FHSCH CYCLONE XTC (HEAVY)

FHSLM LIGHTNING MODIFIED FHS62R 62R

F.H.S. RACING OIL

2-cycle racing oil from Burris Racing. Available in 16oz. bottles in either 50/50 castor/synthetic blend or pure castor oil.

(Price Per Bottle)

PART # DESCRIPTION

BBO BURRIS BLEND OIL (16oz.) BCO BURRIS CASTOR OIL (16oz.)

BURRIS 2-CYCLE OIL

TTCO TRACK TAC® CHILI OIL - 2.5ML (10 pack)

TRACK TAC® OIL ADDITIVE

Track Tac® Chili Oil is a synthetic oil additive that is designed to reduce friction and engine temperature by up to 20° - 40° in 4-cycle engines.

NOT FOR 2-CYCLES! Extreme film former!

PART # DESCRIPTION

2-cycle wet clutch oil.

(Sold per Quart)

PART # DESCRIPTION

KMCL KARTECH 2-CYCLE CLUTCH OIL

CLUTCH OIL

For over 50 years KLOTZ has been dedicated to meeting the needs of racers and performance enthusiasts.

PART # DESCRIPTION

KL605 KLOTZ CHAIN OIL

KLOTZ OILS & CLEANERS

KL606 KLOTZ FOAM PRE-FILTER OIL KL607 KLOTZ FABRIC (PAPER) FILTER OIL KL608 KLOTZ FILTER CLEANER

TRI-FLOW LUBRICANT

PART # DESCRIPTION

TFL TRI-FLOW AEROSOL CAN (12oz.) TFL6 TRI-FLOW AEROSOL CAN (6oz.) TFLS TRI-FLOW SPRAY BOTTLE (18oz.) TFLPPO TRI-FLOW PIN OILER (1/4oz.)

Tri-Flow is considered one of the best lubricants for general purpose use.

TTEW ELEPHANT WASH (quart)

Elephant Wash - Extra Strong is great for washing Trailers, Cars, Motorcycles, & Racing Vehicles. WARNING: Do not expose to open flame. Always wear eye protection, protective gloves, and protect against vapors and droplet inhalation.

PART # DESCRIPTION

TRACK TAC® ELEPHANT WASH

Non-Chlorinated, No CFC Propellant brake cleaner. (Brand may vary)

PART # DESCRIPTION

ERBC BRAKE CLEANER (15oz. aerosol can)

BRAKE CLEANER



. : : TRACK TAC® TIRE PREP

Sold individually or in cases. Add 12 to the end of the part number to specify case quantities. (24 for Tire Tuff Mint Pints)

TTBL TRACK TAC® BLUE TIRE WASH GALLON With Dirt Repelling Technology. Spray tire until dripping wet. Let sit for

1 - 2 minutes then wipe dry with a terrycloth. (4 gal. per Case)

TTPRWO PRW ORANGE QUART (with Dirt Repelling Technology). Best used as pre-race-wipe to fire off tires quicker. Will drop the hardness of tires when cold by 0 - 5points (12qts. per Case)

TTSAAG SAA-GRAPE QUART Very effective in cold weather. Softens tires 15 - 25 points depending on number of coats applied. (12 qts. per Case)

TTSQS SQS QUART Excellent Pre-Race-Wipe for temps under 50°F. Up to a 15 point drop depending on number of coats applied. (12 qts. per Case)

TTGK1 GK1-BLUE QUART Best used on moist tracks when sun goes down. Drops hardness 5 - 15 points depending on number of coats. (12 qts. per Case)

TTBTGPR BTGP-RED QUART Intended for soft, wet tracks. Will

drop the hardness of tire 5 - 35 points depending on number of coats applied. (12qts. per Case)

TTSST5 SST5-PURPLE QUART Designed to add fantastic bite to the tire. Slow drying time, best to apply 8 - 10 days prior to racing. WARNING: Can lock the kart down! (12 qts. per Case)

TTTT TIRE TUFF QUART Designed to enhance the durability of tires. Especially effective on Vega tires run on hard, sealer dirt tracks. (12 qts. per Case)

TTTTM TIRE TUFF MINT QUART Similar to the original Tire Tuff but with a bite agent added in. Great for enhancing durability and creating bite on sealer or paved tracks. (12 qts. per Case)

TTTTMP TIRE TUFF MINT PINT Similar to the original Tire Tuff but with a bite agent added in. Great for enhancing durability and creating bite on sealer or paved tracks. (24 pts. per Case)

TRACK TAC® TIRE PREP

PART # NAME SIZE DESCRIPTION

TRACK TAC® GEM STONE SERIES

TTBS BLACK SAND QUART Part of the GEM Stone series because “Quarts Crystals when crushed becomes sand”. For hard dry slick tracks. Not a pre-race wipe by itself. Meant to be rolled onto the tire 6 - 8 days prior to the race. (12 qts. per Case)

TTR RUBY QUART A tire conditioner with multiple components: 1) Gives a moderate drop in durometer. 2) Extremely versatile. 3) Can be used inside or outside the tire. 4) Mixes well with treatments by other manufacturers. (12 qts. per Case)

TTSA PRW SAPPHIRE QUART Used as a pre-race-wipe for most occasions. Already winning hundreds of races throughout the 2010 season. A good alternative to Black Sand + Acrysol mixes. (12 qts. per Case)

TTK KRYPTONITE QUART CAUTION: For internal use only and will even soften Superman! No mixing needed! 1oz. Will drop an 800x6 - 3points 3/4oz. Will drop a 600x6 - 3points 1/2oz. Will drop a 450x6 - 3points (12 qts. per Case)

TTD DIAMOND QUART Designed for the grueling hot days of summer. Works better the hotter the track conditions. Can be used as an inside or outside wipe. Excellent external mild bite treatment. (12 qts. per Case)

TTT TOPAZ QUART A high performance trackside softener. Best used with a hotbox or some sort of added heat element to drop the durometer readings at the track. Also won‟t kill the tires when used. (12 qts. per Case)

PART # NAME SIZE DESCRIPTION

. : : PRO-BLEND® TIRE PREP

One of the top names in chemical engineering for over 20 years. Pro-Blend provides tire treatments for a wide range of applications and needs.

PRO-BLEND TIRE TREATMENTS

PART # DESCRIPTION

3030 HOT LAP 3 INSIDE TREATMENT, SINGLE (32oz.) 3030C HOT LAP 3 INSIDE TREATMENT, CASE (qty 6)

4000 HOT LAP 101 TREATMENT, SINGLE (Gallon) 4000C HOT LAP 101 TREATMENT, CASE (qty 2)

7050 PRO-BLEND TIRE CLEANER, SINGLE (32oz.) 7050C PRO-BLEND TIRE CLEANER, CASE (qty 6)

8000 HOT LAP PRO-BITE TREATMENT, SINGLE (32oz.) 8000C HOT LAP PRO-BITE TREATMENT, CASE (qty 6) 8000G HOT LAP PRO-BITE TREATMENT, SINGLE (Gallon) 8000GC HOT LAP PRO-BITE TREATMENT, CASE (qty 2)

6032 HOT LAP II TREATMENT, SINGLE (32oz.) 6032C HOT LAP II TREATMENT, CASE (qty 6) 6000 HOT LAP II TREATMENT, SINGLE (Gallon) 6000C HOT LAP II TREATMENT, CASE (qty 2)

PART # DESCRIPTION

Tire Treatment That Does Not Gloss

Dynamic Performance

Excellent When Used on Short Tracks

Over 100 Years of Chemical Technology



. : : 28

. : : TIRE TOOLS & ACCESSORIES

Handy pump bottle that pumps your choice of tire prep into the roller and allows you to “paint” the prep onto the tire.

PART # DESCRIPTION

ROLLO Roll-on Tire Prep Applicator & Bottle ROLLOR Replacement Roller ROLLOB Replacement Bottle

TIRE PREP APPLICATOR

LNTC STANDARD TIRE TOOL

PART # DESCRIPTION

LEATHERNECK TIRE TOOL (STD.)

Tire tool designed to make it easier to mount and dismount tires on the wheel.

(NOT A BEAD BREAKER)

LNTCMA METRIC ADAPTOR PLATE

LEATHERNECK METRIC

Adaptor plate for use with metric pattern wheels.

PART # DESCRIPTION

LNTCVM LEATHERNECK VICE MOUNT

PART # DESCRIPTION

LEATHERNECK VICE MOUNT

Adaptor plate that allows mounting the Leatherneck Tire Tools to a vice.

MTB MANUAL TIRE BEAD BREAKER

PART # DESCRIPTION

R.L.V. MANUAL TIRE BREAKER

Manual tire (bead) breaker by R.L.V. Racing Products.

PM-043 TIRE BALANCER WW WHEEL WEIGHT PACK (pack of 12) (1/2oz self-adhesive weights)

PART # DESCRIPTION

P.M.I. TIRE BALANCER

Precision tire balancer by Performance Manufacturing, Inc. Comes complete with billet aluminum supports, 5/8” shaft, and complete wheel hub assembly.

BM TIRE BAND (Black finish) BMRK REPAIR KIT

TIRE BAND & REPAIR KIT

PART # DESCRIPTION

LNHBB HYDRAULIC BEAD BREAKER LNHBB5R OPTIONAL 5” RINGS

LEATHERNECK BEAD BREAKER

Hydraulic bead breaker by Leatherneck. Includes: Frame, 4-ton bottle Jack, and 6” rings.

PART # DESCRIPTION

TTTN TRACK TAC® TIRE NEEDLER

PART # DESCRIPTION

Perforates the tire to help dissipate heat and help absorb prep faster.

TRACK TAC® TIRE NEEDLER

TTIB TRACK TAC® ICE-BLUE (quart)

PART # DESCRIPTION

Tire mounting lubricant designed to be used after dilution to aid in beading tires. Average 15 - 25psi less pressure needed. Best used with 3 to 1 water to ice-blue dilution.

TRACK TAC® ICE-BLUE



. : : 29

. : : TIRES

SIZE COMPOUND

HARD < ————————————————————————— > SOFT SL3 SL4 RH2C R6 DDC DDH DDM DDS DEM DES

DUNLOP TIRE CHART

Among the leaders in kart racing tire technology for over 30 years, Burris Racing provides various sizes and compounds to meet all racer‟s needs.

SIZE COMPOUND

500x6 B33A / B44A / B55A 600x6 B33A / B44A / B55A 810x6 B33A / B44A / B55A

500x6 SS-11 / SS-22 / SS-33A 600x6 SS-11 / SS-22 / SS-33A 810x6 SS-11 / SS-22 / SS-33A

550x5 TX-11 / TX-22 700x5 TX-11 / TX-22 550x6 TX-11 / TX-22 800x6 TX-11 / TX-22 / TX-33

BURRIS RACING TIRES

HARD < ——————————————————————————– > SOFT SS-33 SS-22 SS-11 B55 B44 B33 TX-33 TX-22 TX-11

PART # DESCRIPTION

MBS4506 450x6 YELLOW / OVAL (2mm) MBS6006 600x6 YELLOW / OVAL (2mm) MBS6506 650x6 YELLOW / OVAL (2mm) MBS8006 800x6 YELLOW / OVAL (2mm) MBS8006HT 800x6 YELLOW / OVAL (3mm) MBM4506 450x6 WHITE / OVAL (3mm) MBM6506 650x6 WHITE / OVAL (3mm) MBM8006 800x6 WHITE / OVAL (3mm) MBH4506 450x6 RED / OVAL (2mm) MBH6006 600x6 RED / OVAL (2mm) MBH8006 800x6 RED / OVAL (extra wide, 2mm)

VEGA TIRES

The latest to join the tire oval kart tire game. VEGA TIRES have rapidly become one of the more popular tires today.

PART # DESCRIPTION

HT34506 HT3 450x6 (BLUE) HT36006 HT3 600x6 (BLUE) HT36006HT HT3 800x6 (BLUE) (half tread)

HT38006HTW HT3 800x6 (PINK) (half tread, wide)

MAXXIS TIRES

Dominating the dirt oval karting market for the past several years, MAXXIS TIRES is still one of the most popular dirt oval tires today.

PART # DESCRIPTION

YKF5006 YKF 10.5 x 5.00 x 6 YKF8006 YKF 11.5 x 8.00 x 6 YJF6506 YJF 10.5 x 6.50 x 6 YJF8006 YJF 11.5 x 8.00 x 6 YKD5006 YKD 10.5 x 5.00 x 6 YKD6506 YKD 11.0 x 6.50 x 6

FIRESTONE TIRES

Winning in many forms of racing from Indy Cars to karts, FIRESTONE now provides 6” tires specifically for the oval kart market.

11.0 x 5.00 x 6 DDC 11.0 x 5.00 x 6 DDH 11.5 x 8.00 x 6 DDH

11.0 x 5.00 x 6 RH2C 11.0 x 5.50 x 6 RH2C 11.5 x 7.10 x 6 RH2C 11.5 x 8.00 x 6 RH2C

11.0 x 5.00 x 6 DES / DEM 11.0 x 5.50 x 6 DES / DEM 11.0 x 6.00 x 6 DES / DEM 11.0 x 7.10 x 6 DES / DEM 11.0 x 8.00 x 6 DES / DEM

DUNLOP TIRES

A mainstay in kart racing for over 30 years, DUNLOP provides a tire for just about every class of kart racing and surface imaginable.

10.0 x 4.50 x 5 SL3 / SL4 11.0 x 5.00 x 5 SL3 11.0 x 5.50 x 5 SL4 11.0 x 6.00 x 5 SL3 / SL4 11.0 x 7.10 x 5 SL3 / SL4

10.0 x 4.50 x 5 R6

10.0 x 4.50 x 5 DES / DEM 11.0 x 5.00 x 5 DES / DEM 11.0 x 5.50 x 5 DES / DEM 11.0 x 6.00 x 5 DES / DEM 11.0 x 6.50 x 5 DES / DEM 11.0 x 7.10 x 5 DES / DEM

SIZE COMPOUND

10.0 x 4.50 x 5 (YDS) CLUB TIRE 11.0 x 6.00 x 5 (YDS) CLUB TIRE 11.0 x 7.10 x 5 (YDS) CLUB TIRE

10.0 x 4.50 x 5 (YLC) WKA SPEC 11.0 x 6.00 x 5 (YLC) WKA SPEC 11.0 x 7.10 x 5 (YLC) WKA SPEC

10.0 x 4.50 x 5 (YJL) SOFT 11.0 x 6.00 x 5 (YJL) SOFT 11.0 x 7.10 x 5 (YJL) SOFT

10.0 x 4.50 x 5 (YKP) RAIN 11.0 x 6.00 x 5 (YKP) RAIN

BRIDGESTONE TIRES

BRIDEGSTONE provides 5” tires ranging from the hard/spec club level compounds all the way up to the national level super soft compounds.



. : : 30

. : : WHEELS

** OK TO MIX SIZE AND BRAND OF WHEELS FOR QUANTITY PRICE **

PART # DESCRIPTION

WMS500X6B 2.5+2.5 OFF SET WMS550X6B 2.5+3.0 OFF SET WMS600X6B 2.5+3.5 OFF SET WMS650X6B 2.5+4.0 OFF SET WMS725X6B 2.5+4.75 OFF SET WMS775X6B 3.0+4.75 OFF SET WMS825X6B 3.0+5.25 OFF SET WMS850X6B 3.5+5.0 OFF SET WMS875X6B 3.5+5.25 OFF SET WMS925X6B 3.5+5.75 OFF SET WMS955X6B 3.5+6.0 OFF SET WMS10X6B 4.0+6.0 OFF SET

WMS 6” MACHINED (BLACK)

Black Machined 6” diameter wheels by Williams Racing Products.

PART # DESCRIPTION

WMS500X6 2.5+2.5 OFF SET WMS550X6 2.5+3.0 OFF SET WMS600X6 2.5+3.5 OFF SET WMS650X6 2.5+4.0 OFF SET WMS725X6 2.5+4.75 OFF SET WMS775X6 3.0+4.75 OFF SET WMS825X6 3.0+5.25 OFF SET WMS850X6 3.5+5.0 OFF SET WMS875X6 3.5+5.25 OFF SET WMS925X6 3.5+5.75 OFF SET WMS950X6 3.5+6.0 OFF SET WMS10X6 4.0+6.0 OFF SET

WMS 6” MACHINED

Machined 6” diameter wheels by Williams Racing Products.

PART # DESCRIPTION

DW500X6M 2.5+2.5 OFF SET DW550X6M 2.5+3.0 OFF SET DW600X6M 2.5+3.5 OFF SET DW650X6M 2.5+4.0 OFF SET DW700X6M 3.0+4.0 OFF SET DW825X6M 3.0+5.25 OFF SET DW850X6M 3.5+5.0 OFF SET DW875X6M 3.5+5.25 OFF SET DW925X6M 4.0+5.25 OFF SET DW10X6M 4.0+6.0 OFF SET

DWT 6” MACHINED Q+

Machined Q+ 6” diameter wheels by Douglas Wheel Technology.

PART # DESCRIPTION

DW450X5 2.0+2.5 OFF SET DW500X5 2.5+2.5 OFF SET DW550X5 3.0+2.5 OFF SET DW600X5 2.5+3.5 OFF SET DW650X5 2.5+4.0 OFF SET DW725X5 2.5+4.75 OFF SET DW750X5 3.5+4.0 OFF SET DW775X5 2.5+5.25 OFF SET DW800X5 4.0+4.0 OFF SET DW825X5 3.5+4.75 OFF SET DW850X5 3.25+5.25 OFF SET DW875X5 3.5+5.25 OFF SET DW925X5 4.0+5.25 OFF SET DW500X5DSM 2.0+3.0 OFF SET-5/8” (DIRECT SPINDLE MOUNT)

DWT 5” POLISHED

Polished 5” diameter wheels by Douglas Wheel Technology.

PART # DESCRIPTION

DW500X6 2.5+2.5 OFF SET DW550X6 2.50+3.00 OFF SET DW600X6 2.5+3.5 OFF SET DW650X6 2.5+4.0 OFF SET DW725X6 2.5+4.75 OFF SET DW775X6 2.5+5.25 OFF SET DW825X6 2.9+5.25 OFF SET DW850X6 3.5+5.0 OFF SET DW875X6 3.5+5.25 OFF SET DW900X6 4.0+5.0 OFF SET DW925X6 4.0+5.25 OFF SET DW950X6 4.0+5.50 OFF SET DW975X6 4.0+5.75 OFF SET DW10X6 4.0+6.0 OFF SET

DWT 6” POLISHED

Polished 6” diameter wheels by Douglas Wheel Technology.

PART # DESCRIPTION

DW500x5QMA 3.0 + 2.0 OFF SET DW550X5QMA 3.0 + 2.5 OFF SET DW600X5QMA 3.0 + 3.0 OFF SET DW600X6QMA 4.0 + 2.0 OFF SET DW800X6QMA 4.0 + 4.0 OFF SET DW850x6QMA 4.0 + 4.5 OFF SET

DWT ONE-PIECE Q.M.A.

Polished single piece Q.M.A (Quarter Midget) wheels by Douglas Wheel Technology.



. : : 31

. : : WHEELS (continued)

. : : WHEEL ACCESSORIES

. : : WHEEL HUBS & ACCESSORIES

PART # DESCRIPTION

MB5-130DX2 5x130mm DSM wheel (pair) MB5-132DX2 5x132mm DSM wheel (pair)

MB5-130VX2 5x130mm VENTED wheel (pair) MB5-132VX2 5x132mm VENTED wheel (pair) MB5-138VX2 5x138mm VENTED wheel (pair) MB5-140VX2 5x140mm VENTED wheel (pair)

MB5-180VX2 5x180mm VENTED wheel (pair) MB5-182VX2 5x182mm VENTED wheel (pair) MB5-210VX2 5x210mm VENTED wheel (pair) MB5-212VX2 5x212mm VENTED wheel (pair)

DWT 5” METRIC MAGNESIUM

Metric 5” magnesium wheels by Douglas Wheel Technology. (Sold per pair)

PART # DESCRIPTION

DW5125X5METDSM 2.0+3.0 OFF SET-17mm (DIRECT SPINDLE MOUNT)

DW5125X5MET 1.625+3.5 OFF SET DW650X5MET 2.5+4.0 OFF SET DW775X5MET 2.5+5.25 OFF SET

DW500X6MET 2.0+3.0 OFF SET DW775X6MET 2.5+5.25 OFF SET

DWT 5” & 6” METRIC (BLACK)

Metric black 5” and 6” diameter wheels by Douglas Wheel Technology.

PART # DESCRIPTION

VKBK VAN-K WHEEL BOLT KIT

VAN-K WHEEL HALF BOLT KIT

Bolt kits for the Van-K wheel halves.

PART # DESCRIPTION

VS VALVE STEM (each)

VALVE STEM

Standard valve stem for either single piece wheels or wheel halves (Van-K).

PART # DESCRIPTION

GMWS TWO-PIECE WHEEL SEALS (each)

G-MAN WHEEL SEALS

G-Man wheel seals for two piece wheels.

PART # DESCRIPTION

WW WHEEL WEIGHTS

WHEEL WEIGHT KIT

Wheel weights for balancing your wheels & tires. Pack of (12) 1/2oz self-adhesive weights.

PART # DESCRIPTION

VKHF 5/8” FRONT HUB (Silver) VKHF** 5/8” FRONT HUB (** Specify Color) (Red, Black, & Gold) VKHFP* ENTENDED FRONT HUB (* Black or Silver) (5/8” front bearing / 3/4” back bearing)

WHEEL HUBS (FRONT)

Billet Aluminum wheel hubs for Front and Back. 5/8” Front Hubs and 1-1/4” Rear Hubs available in Four colors.

WHEEL HUBS (REAR)

VKHR125 1-1/4” REAR HUB (Silver) VKHR125** 1-1/4” REAR HUB (** Specify Color) (Red, Black, & Gold) VKHE125 1-1/4” ENTENDED REAR HUB (Silver Only)

VKHR1 1” REAR HUB (Silver Only)

PART # DESCRIPTION

PART # DESCRIPTION

MM1072 5/8” SEALED WHEEL HUB BEARING (each) 34HB 3/4” SEALED WHEEL HUB BEARING (each) 17MMB 17mm SEALED WHEEL HUB BEARING (each)

WHEEL HUB BEARINGS

Front wheel hub bearings. 5/8”, 3/4” and 17mm available.

VKHBK14 1/4” HUB BOLT KIT (3 nuts & bolts) VKHBK516 5/16” HUB BOLT KIT (3 nuts & bolts)

PMWS P.M.I. WHEEL STUDS, 5/16” (each) (Reduced end for easy wheel nut installation) KWS KLUHSMAN BULLET WHEEL STUDS (12 pack) (1/4” x 28 Thread, Allen Head - 1.5” long)

WHEEL HUB HARDWARE

FNS FLANGE NUT (1/4” x 28) SMOOTH (each) FN516 FLANGE NUT (5/16” x 28 SMOOTH (each)

PART # DESCRIPTION



. : : 32

. : : AXLES & ACCESSORIES

. : : AXLE BEARINGS & ACCESSORIES

PART # DESCRIPTION

AE816434B 1-1/4” x 34” STEEL AXLE .190 (black) AE816436B 1-1/4” x 36” STEEL AXLE .190 (black) AE816438B 1-1/4” x 38” STEEL AXLE .190 (black) AE816440B 1-1/4” x 40” STEEL AXLE .190 (black) AE816435B 1-1/4” x 35” STEEL AXLE T/W .120 (black)

AXLES

AE8105 1-1/4” x 40” ALUMINUM AE8123 1” x 40” FLEXPROOF STEEL

PART # DESCRIPTION

LC1 LOCK COLLAR (1”) (each) LC125 LOCK COLLAR (1-1/4”) (each) LC138 LOCK COLLAR (1-3/8”) (each) LC30MM LOCK COLLAR (30mm) (each) LC40 LOCK COLLAR (40mm) (each)

AXLE LOCK COLLARS

Aluminum two piece lock collars to lock the axle in place on the chassis.

PART # DESCRIPTION

PM-018KS AXLE KEY STOCK SET OF 4 (1/4” X 3/16”) KEYSTOCK (1/4” X 1/4” X 8”) AXLE KEY STOCK (each)

AXLE KEYS

Axle keys available in either single (1/4” x 1/4” x 8”) or a set (1/4” x 3/16”)

PART # DESCRIPTION

SR1 (1”) SNAP RING SR125 (1-1/4”) SNAP RING SR134 (1-3/4”) SNAP RING

AXLE SNAP RINGS

Safety snap rings available for either 1” or 1-1/4” axles.

PART # DESCRIPTION

AB1 (1”) AXLE BEARING (each) FSB (1-1/4”) FREE SPIN AXLE BEARING (each) FSB-P (1-1/4”) LARGE O.D. (2.835) BEARING (each) FSB138 (1-3/8”) FREE SPIN AXLE BEARING (each) FSB40 (40mm) FREE SPIN AXLE BEARING (each) FSB50 (50mm) FREE SPIN AXLE BEARING (each)

REAR AXLE BEARINGS

QM125B (1-1/4”) QUARTER MIDGET BEARING (each)

PART # DESCRIPTION

ABS ALUMINUM BEARING SHIELD, (1.590 ID) (pair) ABSL ALUMINUM BEARING SHIELD, (1.610 ID) (pair)

REMOVABLE BEARING SHIELDS

Removable bearing shields for 1-1/4 axle bearings. Large (1.610 ID) & Small (1.590 ID)

PART # DESCRIPTION

CBK AXLE CASSETTE BOLT KIT Includes: (3) bolts, (3) lock washers & (3) nuts

AXLE CASSETTE BOLT KIT

Fits both the #BRAAC and #KMAC cassettes. Includes: (3) bolts, (3) lock washers & (3) nuts

PART # DESCRIPTION

BRAAC ADJUSTABLE AXLE CASSETTE (each) FITS 1-1/4” AXLE BEARINGS

ADJUSTABLE AXLE CASSETTE

Standard 3-hole pattern (fits most karts). Allows adjustability for either wedge or axle lead depending on mounting position.

PART # DESCRIPTION

KMAC CNC AXLE CASSETTE (each) STANDARD 3-HOLE CASSETTE

CNC AXLE CASSETTE

Standard CNC machined 3-hole 1-1/4” axle bearing cassette.



. : : 33

. : : AXLE SPROCKETS & ACCESSORIES

PART # DESCRIPTION

AP219** SIZES: 65 Through 69 AP219** SIZES: 70 Through 82 AP219** SIZES: 83 Through 88 AP219** SIZES: 89 Through 99 (specify number of teeth)

PREMIER #219 SPLIT SPROCKETS

Two-piece #219 chain sprockets by Premier.

PART # DESCRIPTION

APH1 BILLET SPROCKET HUB 1” (silver only) APH125** BILLET SPROCKET HUB 1-1/4” (specify color) (Black, Red, Gold, or Silver)

SPROCKET HUBS

Aluminum sprocket hubs anodized to match wheel hubs on page 28.

AP8 SMALL - fits 53 through 60 AP9 MEDIUM - fits 61 through 70

PREMIER SPROCKET GUIDES

Heavy duty black anodized aluminum sprocket guides. DOES NOT INCLUDE HARDWARE

(Takes QTY. (2) to use as complete guide)

PART # DESCRIPTION

PART # DESCRIPTION

HO** SIZES: 53 Through 60 HO** SIZES: 61 Through 76 HO** SIZES: 77 Through 85 (specify number of teeth)

HORSTMAN #35 SPLIT SPROCKETS

Standard #35 two piece sprockets by Horstman.

** CLOSE OUT **

GMSG PLASTIC SPROCKET GUIDE

PLASTIC SPROCKET GUIDE

Plastic sprocket guide. Includes bolt kit and built in spacers.

PART # DESCRIPTION

ASG ALUMINUM SPROCKET GUIDE

ALUMINUM SPROCKET GUIDES

Light-weight aluminum sprocket guide with built in spacers. Also includes hardware.

PART # DESCRIPTION

PS SPROCKET GUIDE PLASTIC SPACERS

SGBKF Sprocket Guide Bolt Kit 1/4 x 28 (fine thread) SGBKC Sprocket Guide Bolt Kit 1/4 x 20 (course thread)

SPROCKET GUIDE HARDWARE

& ACCESSORIES

Sprocket guide bolt kits and plastic spacer.

PART # DESCRIPTION

PART # DESCRIPTION

KMSH12 ALUMINUM SPROCKET RACK (12 slot) KMSH24 ALUMINUM SPROCKET RACK (24 slot)

ALUMINUM SPROCKET RACK

Aluminum sprocket racks available in either 12 slot or 24 slot. Pre bent, drilled and ready to mount to the wall of your trailer or cabinet.

PART # DESCRIPTION

RLV** SIZES: 53 Through 80 (specify number of teeth)

R.L.V. #35 SPLIT SPROCKETS

Standard #35 two piece sprockets by R.L.V.

PART # DESCRIPTION

WMS** SIZES: 53 Through 75 (specify number of teeth)

WMS #35 SPLIT SPROCKETS

Standard #35 two piece sprockets by Williams Racing Products.

WMSST** SIZES: 58 Through 68 (specify number of teeth)

WMS “SKIP TOOTH” SPROCKETS

Two-piece #35 SKIP TOOTH sprockets by Williams Racing Products.

PART # DESCRIPTION



. : : 34

. : : CHAIN & ACCESSORIES

. : : STEERING WHEELS & ACCESSORIES

PART # DESCRIPTION

XT2200 RLV XTREME CHAIN 106L #35 Gold on Gold XT2000 RLV XTREME CHAIN 106L #35 Gold on Black XT2200-120 RLV EXTREME CHAIN 120L #35 Gold on Gold

R.L.V. XTREME CHAIN

XTREME #35 spaced chain from R.L.V.

XTML RLV MASTER LINK FOR XT2200 XTMLSTD RLV MSTER LINK FOR XT2000

PART # DESCRIPTION

KMCTM STANDARD #35 CHAIN BREAKER (3/8” PUSH PIN) (Black Anodized)

#35 CHAIN BREAKER

KMPPM REPLACEMENT PUSH PIN (5/16”) #35 KMPPM38 REPLACEMENT PUSH PIN (3/8”) #35

PART # DESCRIPTION

KMCTM219 #219 CHAIN BREAKER (5/16”)

#219 CHAIN BREAKER

KMPPM219 #219 REPLACEMENT PUSH PIN (5/16”)

EKC106 #35 EK STANDARD CHAIN, 40” EKCSP106 #35 EK SILVER PRO CHAIN, 40”

EKC10FT #35 EK STANDARD CHAIN, 10‟ ROLL EKCSP10FT #35 EK SILVER PRO CHAIN, 10‟ ROLL

EKC219 #219 EK STANDARD CHAIN, 40” EKCSP219 #219 EK SILVER PRO CHAIN, 40”

EK KART CHAIN

High Performance chain by EK available in #35 and #219 spacing.

PART # DESCRIPTION

EKML EK MASTER LINK FOR EKC106 EKSPML EK MASTER LINK FOR EKCSP106

GMMM BLACK RHINO MYCHRON MOUNT

BLACK RHINO MYCHRON MOUNT

Black Rhino (G-Man) angled Mychron mount. Centers the mount on the steering wheel.

PART # DESCRIPTION

PART # DESCRIPTION

ASW12** 12” ALUMINUM STEERING WHEEL Four Colors: Red, Black, Blue, Plain (** specify color) ASW14** 14” ALUMINUM STEERING WHEEL Four Colors: Red, Black, Blue, Plain (** specify color)

12” & 14” STEERING WHEELS

Full round wheels in either 12” or 14” in colors of: Red, Black, Blue, or Plain

ACW13** 13” ALUMINUM CUT TOP STEERING WHEEL Four Colors: Red, Black, Blue, Plain (** specify color)

13” CUT TOP STEERING WHEEL

Open top / flat bottom 13” steering wheel in Colors: Red, Black, Blue, or Plain

PART # DESCRIPTION

PM-113a P.M.I. BILLET MYCHRON MOUNT

BILLET MYCHRON MOUNT

Mounts the gauge to the steering shaft. Mount made by Performance Manufacturing.

PART # DESCRIPTION

STEERING SHAFT SUPPORTS

PART # DESCRIPTION

LSS STEERING LOCK / SUPPORT (5/8”) Allows you to lock the steering in an accurate Position for front end alignment and adjustments.

LSSPIN STEERING LOCK REPLACEMENT PIN PSS PLASTIC STEERING SUPPORT (5/8”)

LSS PSS

SHK STEERING WHEEL HUB (less hardware) SPLINED STEERING HUB FOR 5/8” SHAFT VK-012 STEERING WHEEL HUB BOLT KIT (3) PREDRILLED 1/4 28 BOLTS & NUTS CN12THICK 1/2” STEERING SHAFT CASTLE NUT - THICK (.440” tall & 1/2” thread) CN12THIN 1/2” STEERING SHAFT CASTLE NUT - THIN (.320” tall & 1/2” thread)

STEERING HUB & HARDWARE

Splined steering hub for 5/8” steering shafts.

PART # DESCRIPTION



. : : 35

. : : STEERING COMPONENTS

516TR750 5/16” x 7-1/2” 516TR800 5/16” x 8” 516TR850 5/16” x 8-1/2” 516TR900 5/16” x 9” 516TR950 5/16” x 9-1/2” 516TR1000 5/16” x 10” 516TR1050 5/16” x 10-1/2” 516TR1100 5/16” x 11” 516TR1150 5/16” x 11-1/2”

38TR550 3/8” x 5-1/2” 38TR600 3/8” x 6” 38TR650 3/8” x 6-1/2” 38TR700 3/8” x 7” 38TR750 3/8” x 7-1/2” 38TR800 3/8” x 8” 38TR850 3/8” x 8-1/2” 38TR900 3/8” x 9” 38TR950 3/8” x 9-1/2” 38TR1000 3/8” x 10” 38TR1050 3/8” x 10-1/2” 38TR1100 3/8” x 11” 38TR1150 3/8” x 11-1/2” 38TR1200 3/8” x 12” 38TR1250 3/8” x 12-1/2”

THREADED TIE-RODS

Both 5/16” and 3/8” threaded tie rods featuring left and right handed threads.

PART # DESCRIPTION

HJ516LH 5/16” LEFT HAND ROD END HJ516RH 5/16” RIGHT HAND ROD END JN516LH 5/16” LEFT HAND JAM NUT JN516RH 5/16” RIGHT HAND JAM NUT HJ38LH 3/8” LEFT HAND ROD END HJ38RH 3/8” RIGHT HAND ROD END JN38LH 3/8” LEFT HAND JAM NUT JN38RH 3/8” RIGHT HAND JAM NUT

ROD ENDS

PART # DESCRIPTION

38SB 3/8” I.D. SPINDLE (KING-PIN) BEARING 12SB 1/2” I.D. SPINDLE (KING-PIN) BEARING 716SB 7/16” I.D. SPINDLE (KING-PIN) BEARING QM38SB 3/8” I.D. QMA SPINDLE (KING-PIN) BEARING

KING PIN BEARINGS

PART # DESCRIPTION

38SB / 12SB QM38SB

UPPER HEIM JOINT KITS

Upper heim joint kits for quick camber adjustment.

PART # DESCRIPTION

HJ12RH 1/2” UPPER RIGHT HAND ROD END JN12RH 1/2” UPPER RIGHT HAND JAM NUT

HJ716RH 7/16” UPPER RIGHT HAND ROD END JN716RH 7/16” UPPER RIGHT HAND JAM NUT

ZX1HJK 7/16” SHADOW UPPER HEIM JOINT KIT (1) Heim, (2) Nuts, (1) Washer

HJ12RHCA 1/12” UPPER HEIM JOINT KIT (1) Heim Joint, (1) Jam Nut, (1) Castle Nut, (6) Washers, (1) Safety Clip

RHCSLH RAGE HIGH CROSS LEFT SPINDLE RHCSRH RAGE HIGH CROSS RIGHT SPINDLE RSPLH7 RAGE STANDARD LEFT (7°) SPINDLE RSPRH9 RAGE STANDARD RIGHT (9°) SPINDLE ZX1SLH SHADOW (ZX1 / STORM) LEFT SPINDLE ZX1SRH SHADOW (ZX1 / STORM) RIGHT SPINDLE

FRONT SPINDLES

Both Shadow Karts and Rage Karts spindles. (Shadow spindle pictured)

PART # DESCRIPTION

WS18B 1/8” x 5/8” WHEEL SPACER (Black only) WS14 1/4” x 5/8” WHEEL SPACER (Silver or Black) WS12 1/2” x 5/8” WHEEL SPACER (Silver or Black)

WS1834 1/8” x 3/4” WHEEL SPACER (Black only) WS1434 1/4” x 3/4” WHEEL SPACER (Black only)

WS4MM 4mm x 17mm WHEEL SPACER (Silver only) WS8MM 8mm x 17mm WHEEL SPACER (Silver only)

FRONT SPINDLE (WHEEL) SPACERS

Front spindle (wheel) spacers to space the front hub in or out on the spindle. (Sold per each)

PART # DESCRIPTION

SN 5/8” SPINDLE CASTLE NUT SW 5/8” SPINDLE WASHER

SPINDLE NUT & WASHER

Front spindle nut & washer. (sold separately)

PART # DESCRIPTION



. : : 36

. : : THROTTLE & BRAKE LINKAGE ACCESSORIES

. : : MISCELLANEOUS

ZX1TP SHADOW THROTTLE PEDAL ZX1BP SHADOW BRAKE PEDAL

THROTTLE & BRAKE PEDALS

Shadow Karts throttle & brake pedals.

PART # DESCRIPTION

KMPG** 3/8” ALUMINUM PEDAL GRIPS (** specify color) (Red, Blue, Gold, Purple, Black, or Silver) KMPG12** 1/2” ALUMINUM PEDAL GRIPS (** specify color) (Black or Silver only)

ALUMINUM PEDAL GRIPS

Available in 3/8” or 1/2” sized pedal shafts. (Sold per pair)

PART # DESCRIPTION

KMPR ALUMINUM PEDAL RISERS (per pair)

ROOKIE PEDAL PLATFORMS

PART # DESCRIPTION

Pedal “riser” platforms designed to allow placement of the pedals for short rookie/junior drivers in custom locations on the floor-pan. Also raises the pedals above tie-rods and other obstructions.

BF BRASS FITTING (each) BFK BRASS FITTING FERRULES (pack of 5)

BRASS FITTING

Standard cable housing fitting. Allows attachment of throttle cable housing.

PART # DESCRIPTION

TC THROTTLE CABLE (3/16” ball end) TCI THROTTLE CABLE (barrel end)

PART # DESCRIPTION

INNER THROTTLE CABLE

Throttle cables available with a ball end or barrel end.

PCT** COLORED CABLE TIES (** specify color) (Black, Blue, Gray, Green, Orange, Purple, Red, Yellow)

PCT**F FLUORESCENT CABLE TIES (** specify color) (FL Green, FL Orange, FL Yellow)

PART # DESCRIPTION

CABLE TIES (100 pack)

7-1/2” cable ties (also known as ZIP TIES or TIE-WRAPS) available in several different colors and in pack of 100 only.

NBPK NERF BAR PIN KIT

NERF BAR PIN KIT

PART # DESCRIPTION

Nerf bar pin kit. Allows quick release of the nerf bars for easy access to work on the kart.

BLN6 NYLON CABLE HOUSING (6‟) BLN100 NYLON CABLE HOUSING (100‟)

CABLE HOUSING

PART # DESCRIPTION

Outer throttle cable housing available in either 6‟ or 100‟ rolls.

KMSP SAFETY CLIP (large) KMSPS SAFETY CLIP (small)

SAFETY CLIPS

Safety (aka: fuel line) clips available both a “small” and “large” size.

PART # DESCRIPTION

CLEVIS THROTTLE & BRAKE ROD CLEVIS (1/4” x 28) CPIN CLEVIS PIN (drilled for safety clip)

THROTTLE & BRAKE ROD CLEVIS

Standard 1/4” x 28 thread clevis for throttle & brake rods.

PART # DESCRIPTION

DP-248 IN-LINE THROTTLE ROD SPRING

IN-LINE THROTTLE ROD SPRING

Standard in-line throttle rod return spring that slips over the throttle rod to help return the throttle linkage to the „off‟ position.

PART # DESCRIPTION

DP-390 THROTTLE CABLE/HOUSING KIT

THROTTLE CABLE/HOUSING KIT

PART # DESCRIPTION

This kit includes: (2) brass fittings, (1) ball end throttle cable, and (1) 4ft. Cable housing.



. : : 37

. : : BRAKE PARTS & ACCESSORIES

MCPB** STANDARD BRAKE KIT (** specify axle size) (master cylinder, caliper, 1” or 1-1/4” hub, rotor, brake line & fluid)

MCP (STANDARD) BRAKE SYSTEM

Martin Custom Products standard brake system & parts.

PART # DESCRIPTION

BBH1 BILLET BRAKE HUB (1”) BBH125 BILLET BRAKE HUB (1-1/4”) BBH138 BILLET BRAKE HUB (1-3/8”)

MCPBC BRAKE CALIPER (STANDARD) VK38400 CALIPER MOUNT BOLT (1 bolt, 1 nut, & safety pin) (1 bolt, 1 nut, & safety pin) VK38412 CALIPER MOUNT BOLT (used with Rotor Guard) (1 bolt, 1 nut, & safety pin) MCPCK CALIPER REBUILD KIT (STANDARD) MCPCS CALIPER SHIM (1/16”)

MCPBP BRAKE PAD (STD) BLACK (each) MCPBPBL BRAKE PAD, BLUE (high performance) (each)

MCPMC MASTER CYLINDER (STANDARD) VK-516214 MASTER CYLINDER MOUNT BOLT (1 bolt, 1 nut, & safety pin) MCPMCK MASTER CYLINDER REBUILD KIT (STANDARD)

MCPBF4 BRAKE FLUID 4 OUNCE MCPBF8 BRAKE FLUID 8 OUNCE

BRAKE FLUID

DOT 5 silicone brake fluid. Available in 4oz. Or 8oz bottles. (Sold per bottle)

PART # DESCRIPTION

MCPAA ADJUSTER ASSEMBLY MCPBSA BLEEDER SCREW ASSEMBLY MCPBS BLEEDER SCREW (ONLY) MCPLA MASTER CYLINDER LEVER ARM

GENERAL MCP PARTS

General Martin Custom Products brake parts that fit both the standard and mini-lite brake systems.

MCPMCC MASTER CYLINDER CAP (plastic) JRMCC** BILLET MASTER CYLINDER CAP (** specify color: black, blue, red, or silver)

BLN100 BRAKE LINE NYLON (100 foot roll) BLN6 BRAKE LINE NYLON (6 foot roll)

PART # DESCRIPTION

MCPBSL30 30” BRAIDED STEEL BRAKE LINE MCPBSL32 32” BRAIDED STEEL BRAKE LINE MCPBSL55 55” BRAIDED STEEL BRAKE LINE MCP316F 3/16” x 1/8” FITTING (STRAIGHT) (for braided steel brake lines)

STEEL BRAIDED BRAKE LINES

PART # DESCRIPTION

WP ROTOR GUARD FOR MCP STD CALIPER WPML ROTOR GUARD FOR MCP MINI LITE CALIPER WPRN ROTOR GUARD FOR STD REAR MOUNT (NARROW) WPRW ROTOR GUARD FOR STD REAR MOUNT (WIDE)

BRAKE ROTOR GUARD

PART # DESCRIPTION

Guards the driver & seat from being penetrated by the brake disc in a heavy rear end collision.

MCPBDS 3/16” x 7.1” BRAKE DISC (STANDARD) MCPBDL 1/8” x 7.1” BRAKE DISC (LITE WEIGHT)

MCPMLB MINI LITE BRAKE KIT (1-1/4” only) (master cylinder, caliper, 1” or 1-1/4” hub, rotor, brake line & fluid)

MCP (MINI-LITE) BRAKE SYSTEM

Martin Custom Products mini-lite brake system & parts

PART # DESCRIPTION

BBH125ML MINI LITE BILLET BRAKE HUB (1-1/4” only)

MCPBCML MINI LITE BRAKE CALIPER VK-516400 CALIPER MOUNT BOLT FOR MINI-LITE

(1 bolt, 1 nut, & safety pin) MCPCKML MINI LITE CALIPER REBUILD KIT MCPMLBS MINI LITE CALIPER SHIM MCPBCFWB BRAKE CALIPER (FRONT WHEEL BRAKE) MCPCKFWB CALIPER REBUILD KIT (FWB)

MCPMLBP** MINI-LITE BRAKE PAD (** specify) (each) Black (std. steel), green (aluminum disc) MCPMLBPBL MINI-LITE BRAKE PAD - BLUE (each) (high performance)

MCPMCML MINI LITE MASTER CYLINDER VK-516214 M/L MASTER CYLINDER MOUNT BOLT (1 bolt, 1 nut, & safety pin) MCPMCKML MINI-LITE MASTER CYLINDER REBUILD KIT

MCPBDL 1/8” x 6” LITE WEIGHT DISC (Standard in kit) MCPBDS 3/16” x 6” BRAKE DISC (THICK)



. : : 38

. : : BODY WORK & ACCESSORIES

GMBK4** G-Man Body Kit #4A GMBKN4** NOSE ONLY GMBKP4** PANELS ONLY (pair)

G-MAN PLASTIC BODY KIT - #4A

G-Man Kart Works off-set body kit. (Colors available: Black or White only)

PART # DESCRIPTION

GMBKJR** G-Man Body Kit JR GMBKJRN** NOSE ONLY GMBKJRP** PANELS ONLY (pair)

PART # DESCRIPTION

G-MAN PLASTIC BODY KIT - JR

G-Man Kart Works off-set body kit (Junior) (Colors available: Black or White only)

GMMJP** G-man Mini Jumbo Panels (pair)

PART # DESCRIPTION

G-MAN MINI JUMBO PANELS

G-Man Kart Works mini jumbo panels. WHITE ONLY!

GMCSG Clear Side Penal Guards

PART # DESCRIPTION

CLEAR SIDE PANEL GUARDS

Clear side panel guards (rub rails). Protects your graphics or paint from being rubbed off during racing action.

LNFB LEATHERNECK FAIRING BRACKET

PART # DESCRIPTION

LEATHERNECK FAIRING BRACKET

Fairing bracket by LEATHERNECK Racing Products. Includes Mychron receiver mount and hardware.

WB34 SHORT WEIGHT BRACKET (3/4”) WB1 SHORT WEIGHT BRACKET (1”) WB118 SHORT WEIGHT BRACKET (1-1/8”) WB125 SHORT WEIGHT BRACKET 1-1/4”) WBL34 LONG WEIGHT BRACKET (3/4”) WBL1 LONG WEIGHT BRACKET (1”) WBL118 LONG WEIGHT BRACKET (1-1/8”) WBL125 LONG WEIGHT BRACKET (1-1/4”)

PART # DESCRIPTION

WEIGHT BRACKETS

Weight brackets for tubing sizes ranging from 3/4” to 1-1/4” that allows placement of weights just about anywhere on the kart. Also works well for mounting body work to the front bumper.

UNIS** UNICO FRONT SPOILER (** SPECIFY COLOR) Red, Black, White, Yellow, Silver, & Blue

UNIP** UNICO SIDE POD (each) (** SPECIFY COLOR) Red, Black, White, Yellow, Silver, & Blue

UNIF** UNICO DRIVER FAIRING (TWO PIECE) (** SPECIFY COLOR) Red, Black, White, Yellow, Silver, & Blue

PART # DESCRIPTION

KG C.I.K. BODY WORK

C.I.K. approved Unico style body work by KG.

GMCFNS G-Man Clear Fairing GMSFNS G-Man Smoked Fairing

PART # DESCRIPTION

G-MAN CLEAR FAIRINGS

G-Man Kart Works driver fairing available in either clear or smoked.

GMMK** G-Man Body / Panel Hardware Kit

PART # DESCRIPTION

G-MAN BODY MOUNT HARDWARE

Body mounting hardware (Bolts, nuts, washers, & colored plastic button washers.

(Colors: Black, Red, White, Yellow, & Blue)

GMBK3B G-Man Body Kit #3 GMBKN3** NOSE ONLY GMBKP3** PANELS ONLY (pair) GMBKN3B42 42” Wide Nose BLACK ONLY

G-MAN PLASTIC BODY KIT - #3

G-Man Kart Works off-set body kit (Straight) (Colors available: Black or White only)

PART # DESCRIPTION

DPAMK** Aluminum Body Mount Hardware (** Specify color)

PART # DESCRIPTION

ALUMINMUM BODY MOUNT HARDWARE

Body mounting hardware with aluminum dished washers. (Blue, Black, Red, Gold & Silver) (Comes with 15 nuts, bolts & washers per kit)



. : : 39

. : : NUMBERS, NUMBER PANELS, & COLORED TAPE

. : : SEATS & ACCESSORIES

RT30OF 2” x 30‟ FLOR/ORG. RT30YF 2” x 30‟ FLOR/YEL. RT30GF 2” x 30‟ FLOR/GRN. RT30PF 2” x 30‟ FLOR/PINK

ISC RACER‟S TAPE

BRIGHT, BRILLIANT COLORS

STANDARD DUTY TAPE USED FOR MOST RACING APPLICATIONS

EXCELLENT FOR PLASTIC BODY WORK THAT PAINT WON’T STICK TO

AVAILABLE IN A VARIETY OF COLORS INCLUDING CHECKER BOARD & CHROME

PART # DESCRIPTION

RT90B 2” x 90‟ BLACK RT90BL 2” x 90‟ BLUE RT90C 2“ x 90‟ CHROME RT90G 2” x 90‟ GREEN RT90O 2” x 90‟ ORANGE RT90P 2” x 90‟ PURPLE RT90R 2” x 90‟ RED RT90W 2” x 90‟ WHITE RT90Y 2” x 90‟ YELLOW

RT45CH 2” x 45‟ CHECKERED RT45CHA 2” x 45‟ CHECKERED, ANGLED

NB** BLACK NUMBERS (10 pack) (**specify number) NW** WHITE NUMBERS (10 pack) (**specify number)

PART # DESCRIPTION

STICK-ON NUMBERS

6” stick on numbers. Solid in packs of ten(10) only. Available in either White or Black.

NPW NUMBER PANELS - WHITE (each) NPB NUMBER PANELS - BLACK (each) NPY NUMBER PANELS - YELLOW (each) NPBL NUMBER PANELS - BLUE (each)

PART # DESCRIPTION

NUMBER PANELS

Plastic number panels. (7-18” x 10”). Available in White, Black, Yellow, & Blue.

NPWSO STICK-ON PANEL - WHITE (self adhesive)

LNFSJR (Junior) Oval Track Seat LNFSS (Small) Oval Track Seat LNFSM (Medium) Oval Track Seat LNFSL (Large) Oval Track Seat LNFSXL (X-Large) Oval Track Seat LNFSXXL (XX-Large) Oval Track Seat LNFSXXXL (XXX-Large) Oval Track Seat

PART # DESCRIPTION

FIBERGLASS LAYDOWN SEATS

Fiberglass laydown seats by Leatherneck. Sizes from Junior through XXX-Large.

GMSSR (Rookie) Sit-Up Style Seat GMSSJ (Junior) Sit-Up Style Seat GMSSS (Small) Sit-Up Style Seat GMSSSM (Sm. / Med.) Sit-Up Style Seat GMSSM (Medium) Sit-Up Style Seat GMSSL (Large) Sit-Up Style Seat GMSSXL (X-Large) Sit-Up Style Seat GMSSXXL (XX-Large) Sit-Up Style Seat

PART # DESCRIPTION

G-MAN PLASTIC SPRINT SEAT

(SIT-UP SPRINT STYLE) Plastic molded “sit-up” style seats.

LNSSAS Leatherneck Adjustable Angled Seat Strut (Small, Adjustable: 5.5” - 7”)(14° angle) LNSSAL Leatherneck Adjustable Angled Seat Strut (Large, Adjustable: 10” - 13”)(14° angle) LNSSASS Leatherneck Adjustable Straight Seat Strut

(Small, Adjustable: 5.5” - 7”) LNSSASL Leatherneck Adjustable Straight Seat Strut (Large, Adjustable: 10” - 13”)

PART # DESCRIPTION

LEATHERNECK SEAT STRUTS

LNSS Leatherneck Front Seat Sliders (per pair)

KMSU Seat Upholstery (Black) KMSUBL Seat Upholstery (Blue) KMSUR Seat Upholstery (Red)

PART # DESCRIPTION

3-PIECE SEAT UPHOLSTERY

Works great on both fiberglass or plastic seats. Uses stick-on velcro to attach to the seat.

MSMK Seat Mount Kit (Bolts, Nuts, Washers & Grommets) RSGK Rubber Seat Grommet Kit (pack of 4)

PART # DESCRIPTION

SEAT MOUNTING HARDWARE

FIBERGLASS SEAT SIZE CHART

Medium Large X-Large XX-Large

8 1/4” 10 1/2” 11 3/4” 12 3/4” 13 1/2”

Junior Small

9 1/4”

(Measured at the narrowest part of seat)

XXX-Large

15 1/4”



. : : 40

. : : SAFETY APPAREL

Youth Size Chart

Chest

Small Medium Large X-Large

26 - 28 28 - 30 30 - 32 32 - 34

Adult Size Chart

Chest

Medium Large X-Large XX-Large

34 - 36 38 - 40 42 - 44 46 - 48 50 - 52

Small

LNCR NECK COLLAR - RED LNCB NECK COLLAR - BLACK LNCBL NECK COLLAR - BLUE

PART # DESCRIPTION

LEAF NECK COLLARS

(Not Fire Resistant) LEAF 360° neck collar with wedge support. Available in Child and Adult sizes as well as colors of: Red, Black, or Blue.

RWNCCB NECK COLLAR childs/black RWNCAB NECK COLLAR adult/black RWNCCR NECK COLLAR childs/red RWNCAR NECK COLLAR adult/red RWNCCBL NECK COLLAR childs/blue RWNCABL NECK COLLAR adult/blue

PART # DESCRIPTION

RACEWEAR NECK COLLARS

(Not Fire Resistant) Racewear 360° neck collar with wedge support. Available in Child and Adult sizes as well as colors of: Red, Black, or Blue.

LE500CS BLACK CHILD SMALL LE500CM BLACK CHILD MED. LE500CL BLACK CHILD LARGE LE500XS BLACK ADULT X-SMALL LE500S BLACK ADULT SMALL LE500M BLACK ADULT MED. LE500L BLACK ADULT LARGE LE500XL BLACK ADULT X-LARGE

PART # DESCRIPTION

RACEWEAR 500 SERIES GLOVES

(Not Fire Resistant) Racewear 500 series gloves. Features leather palms, spandex between the fingers, and a mesh backing with a soft leather knuckle guard. (Black Only)

TOPK TEAR OFF POST KIT TOS TEAR OFF (Straight) 20 PACK TOB TEAR OFF (Banana) 20 PACK

PART # DESCRIPTION

HELMET TEAR-OFFS

Helmet tear-offs in both straight and “banana” shape. Helps keep visibility clean after oil, dirt, and other debris collect on the visor.

KKV KID KART (Chest: 22” - 27”) JRV JUNIOR (Chest: 25” - 30”) JRIIV JUNIOR II (Chest: 28” - 37”)

PART # DESCRIPTION

ARMADILLO RIB VESTS

S.F.I. certified (WKA and IFK legal) Provides great chest protection as well as completely covering the torso of the driver.

RW600** YOUTH KARTING JACKET (** specify size) (Sizes: Small, Medium, Large, X-Large) RW601** ADULT KARTING JACKET (** specify size) (Sizes: Small, Medium, Large, X-Large, XX-Large)

PART # DESCRIPTION

RACEWEAR DRIVING JACKETS

(Not Fire Resistant)

Durable Nylon Construction

Mesh Ventilation panels

Pre-Curved Arms

Heat resistant forearm and elbow patch

Action Shoulder Gussets

Available in Black / Red Accents

LE200CS LE 200 CHILD SMALL LE200CM LE 200 CHILD MED. LE200CL LE 200 CHILD LARGE LE200XS LE 200 ADULT X-SMALL LE200S LE 200 ADULT SMALL LE200M LE 200 ADULT MED. LE200L LE 200 ADULT LARGE LE200XL LE 200 ADULT X-LARGE

PART # DESCRIPTION

RACEWEAR 200 SERIES GLOVES

(Not Fire Resistant) All new gloves designed for looks and comfort. Full length with vecro wrist closure and reinforced palm and thumb.

(Black with Gray Accents)



. : : 41

. : : KART & DRIVER ACCESSORIES

. : : ELECTRIC STARTERS

BEHB RACEWEAR HELMET BAG

PART # DESCRIPTION

RACEWEAR HELMET BAG

Nylon bag with fleece lining. Helps protect the helmet from the elements during storage.

RWSC KART COVER - FLAT KARTS (Black Only) RWCC KART COVER - CHAMP (CAGED) KARTS & QUARTER MIDGETS (Black Only)

PART # DESCRIPTION

RACEWEAR KART COVERS

Kart covers by Racewear for both flat karts & champ (caged) karts.

GMFJ G-man Fuel Jug (1 Gallon) GMFJ3 G-man Fuel Jug (3 Gallon) GMFJ5 G-man Fuel Jug (5 Gallon)

PART # DESCRIPTION

G-MAN PLASTIC FUEL JUGS

Fuel jugs by G-MAN in three sizes: 1, 3, & 5 gallons.

GMFJC5 Replacement Cap for (5gal.) jug GMFJ5H Filler Hose for (5gal.) jug

LNRKS LEATHERNECK ROLLING KART STAND

PART # DESCRIPTION

LEATHERNECK KART STAND

Leatherneck rolling kart stand (pit buggy). Comes disassembled for UPS shipping. (Black powder coated)

11911 LONGACRE EQUIPMENT BAG

PART # DESCRIPTION

LONGACRE EQUIPMENT BAG

Great bag for holding al your gear: Helmet, gloves, neck brace, shoes, suit, and more. Comes in Red with Black trim.

SCSSMH SUPER MINI (HEAVY-DUTY)

RIGHT HAND, 10 AMP BATTERY SCSSML SUPER MINI SELF CONTAINED STARTER, LEFT HAND (reverse rotation)

PART # DESCRIPTION

COLEMAN MINI STARTERS

Self contained mini-light starter by Coleman. Gear reduction drive complete with 10amp battery. 10 amp BATTERY INCLUDED!

SCSR SELF CONTAINED STARTER RIGHT HAND (std. rotation)

SCSL SELF CONTAINED STARTER LEFT HAND (reverse rotation)

PART # DESCRIPTION

COLEMAN STANDARD STARTERS

Self contained starters by Coleman. Gear reduction drive. Left or Right hand rotation available. BATTERY NOT INCLUDED!

SDA STARTER DRIVE COMPLETE (GEAR REDUCTION STARTER) SDT STARTER DRIVE TUBE (GEAR REDUCTION STARTER) SDE STARTER DRIVE END (GEAR REDUCTION STARTER)

SDE1516 STARTER DRIVE END, 15/16”

SBH**12 REPLACEMENT BENDIX 12” (.490)

PART # DESCRIPTION

COLEMAN STARTER BENDIXES

Replacement starter drives (for gear reduction starters) and bendix (for older style starters)

CMSB MINI STARTER BATTERY (8 amp.)

CMSB10 MINI STARTER BATTERY (10 amp.)

CSS STARTER SOLENOID (FOR ALL MODELS OF STARTERS)

PART # DESCRIPTION

COLEMAN REPLACEMENT PARTS

Please call for pricing and availability on parts not listed.

100-RH-6 MINI LITE GEAR REDUCTION STARTER RIGHT HAND (std. rotation)

PART # DESCRIPTION

BURRIS MINI LITE STARTER

Gear reduction drive starter with right hand rotation and sealed lead acid battery.

BATTERY INCLUDED!



. : : 42

. : : AIM SPORTS

( 5% DISCOUNT ON THREE GAUGES OR MORE, MIX AND MATCH OK )

MYCHRON SERIES KARTING GAUGES

MYCHRON 4

MYCHRON TG

Inductive RPM Pickup

1 Temp input (2 with Ebox Expansion)

MPH Standard with Ebox Expansion

Lap Times / Counter (all models)

250 Lap Memory

Auto Off Feature

Long Battery Life

Min & Max Rpm Report Per Lap

Max Temp Report Per Lap

Built In Data Logging (all models)

New Wide View Display

Back Lite Standard

Download To PC (all models)

...and much more!

MC4 RPM / TEMP / TIMING MC4T2 RPM / TEMP x 2 / TIMING MC4DRAG MC4 660 - JR DRAGSTER VERSION

MYCHRON 4

FEATURES:

MODEL # FEATURES

TG6V 6 VOLT LAP TIMER TG12V 12 VOLT LAP TIMER (12 volt external powered)

Small and Light Weight

Large 480 Lap Memory

Self Powered - Long Life Coin Battery

Easy To Read Display

Non-Volatile Memory

Auto-Off Feature

Large 12mm Numbers

Hands Free Operation

1 Year Warranty - Competition Use

MYCHRON TG

FEATURES:

MODEL # FEATURES

EBOX DATA LOGGER ADD-ON (RPM / TEMPx2 / MPH / LAP TIMING / TRACK MAPPING)

MODEL # FEATURES

MYCHRON 4 E-BOX

2 additional temperature inputs.

Wheel speed input (sensor included).

Track mapping w/ internal accelerometer.

2 extra 9v battery connections for extra runtime.

MC4GPS MYCHRON GPS MODULE

MODEL # FEATURES

MYCHRON GPS MODULE

The Mychron GPS module connects to the Mychron4 and allows you to monitor your position and speed anywhere on the track. You can review your performances through real images exported to Google Earth.

MC4EXP MYCHRON EXPANSION MODULE

MODEL # FEATURES

MYCHRON EXPANSION HUB

Mychron Expansion Hub is a channel multiplier that adds four additional channels and a CAN bus connector (for LCU, Smarty Cam, GPS, etc). The Expansion hub can power the MC4 or MC4 T2 and any peripherals.

MYCHRON 4 STEERING WHEELS

MC4SW** “SPRINT STYLE” STEERING WHEEL (** Specify Color) (RED, BLACK, PURPLE, ORANGE)

MC4OSW “OVAL KART” STEERING WHEEL (Black Only)

MODEL # FEATURES

(MC4 GAUGE SOLD SEPARATELY)

(MC4 GAUGE SOLD SEPARATELY)



. : : 43

. : : AIM SPORTS (continued)

MYCHRON DOWNLOAD ACCESSORIES AND SOFTWARE

EKEY DOWNLOAD KEY (MC4 & E-BOX) PCCONNMC3 DOWNLOAD CABLE (MC3) PCCONNPLUS DOWNLOAD CABLE (MC3 PLUS & MC3 GOLD)

MODEL # FEATURES

MULTICHRON STOPWATCH

FEATURES: Lap Times for up to 4 Simultaneous Competitors 99 Lap Memory per Competitor

MULT Multi-function Stopwatch (Black only)

MODEL # FEATURES

For Models MC3 or MC4

RACE STUDIO

MyChron3 & 4 Support Customizable Views Free Down load & Upgrades

New Explorer-like Navigation Modify Plot Colors Modify Graph Line Weight Download Cables with Software CD.

ACCESSORIES

MYBEAC BEACON ASSEMBLY MCSTB SPLIT TIME BEACON MCTR3 MC3 & MC4 RECEIVER MC3MBR MC3 & MC4 MAGNETIC BEACON RECEIVER ASSEMBLY

MC4RPM RPM SENSOR (MC2, MC3, MC3 PLUS & MC4) MC3PRPM RPM SENSOR (MC3 GOLD only) MCRPMC RPM SENSOR PLASTIC CLIP MC3EXT CHT/EGT EXT. LEAD (MC3 & MC4 all models)

MCEGTS EGT SENSOR (all models) MC3EGTC MC3 & MC4 EGT CLAMP ASSEMBLY MCWOF MYCHRON WELD ON EGT FITTING

MCCHT CHT SENSOR, SHORT (all models, requires extension) MC3CHT1P CHT 1 PIECE SENSOR (MC3 & MC4 only) MC3CHT10MM CHT 1 PIECE SENSOR 10mm (for World Formula)

MC3RS (10mm) ROTAX WATER SENSOR (MC3 & MC4, requires extension) MC3WT (5mm) WATER TEMP SENSOR (sensor only, requires extension) MC3WTS (5mm) MC3 & MC4 WATER TEMP SENSOR (with extension) MCWTC34 WATER TEMP HOSE COUPLER (3/4”) MCWTC58 WATER TEMP HOSE COUPLER (5/8”)

MC3SS MPH SENSOR MC3 (axle, all MC3‟s & MC4) MC125 (1.25”) AXLE COLLAR w/ MAGNET (for m.p.h. sensor) MC30MM (30mm) AXLE COLLAR w/ MAGNET (for m.p.h. sensor) MC40MM (40mm) AXLE COLLAR w/ MAGNET (for m.p.h. sensor) MC50MM (50mm) AXLE COLLAR w/ MAGNET (for m.p.h. sensor)

MC2EXT CHT/EGT EXT. LEAD (MC2 all models) MCMPHA MPH SENSOR MC2 (axle) MCMPHW MPH SENSOR MC2 (front wheel)

PART # DESCRIPTION

OUTERWEARS® MC4 TACH BAG

OWTBMC4** OUTERWEARS® MC4 TACH BAG (Specify Color: Black, Blue, Red, Yellow)

MODEL # FEATURES

The OUTERWEARS® tach bag fits snug over the MC4 basic unit. Protects against debris, water, and dirt. (NOTE: The OUTERWEARS® tach bag, because of the draw-string fit, is not 100% water proof.)



. : : 44

. : : LONGACRE RACING PRODUCTS

78100 BUBBLE CAMBER GAUGE ONLY (Adapt. Included) 78110 DIGITAL CAMBER GAUGE (Adapt. included) 78250 BUBBLE CASTER / CAMBER GAUGE (Less Adapt.)

78423 SPINDLE ADAPTOR (MAGNETIC / AUTO) 78438 SPINDLE ADAPTOR (SAE) 78439 SPINDLE ADAPTOR (METRIC)

LONGACRE CASTER/CAMBER GAUGES

PART # DESCRIPTION

78100 78110 78250

5040 0-60 in 1 lb increments 5042 0-30 in 1/2 lb increments 5045 0-15 in 1/4 lb increments

PART # DESCRIPTION

LONGACRE STD. TIRE GAUGES

2” white face, high accuracy gauge. Air release button and ultra flexible 14” hose.

50402 0-60 Deluxe Glow in the Dark 50422 0-30 Deluxe Glow in the Dark 50452 0-15 Deluxe Glow in the Dark

PART # DESCRIPTION

LONGACRE GLOW-IN-DARK GAUGES

2-1/2” glow-in-the-dark face w/ gauge dampener for more accuracy. Air release button & ultra flexible 17” hose.

50690 MEMORY PYROMETER

LONGACRE MEMORY PYROMETER

Stores 10 sets of temp readings. Can compute tire temp averages. Comes with built in night light with auto shut-off. Also features a built-in 4-car stopwatch and includes a carrying case.

PART # DESCRIPTION

50614 INFRARED PYROMETER

LONGACRE INFRARED PYROMETER

12 temp memory

Reads in .1 degree

Reads farhenheit celsius

Laser sight

PART # DESCRIPTION

Back light for night use

Reads temps to 1,000°

Storage pouch included

50347 DIGITAL TIRE GAUGE (NEW STYLE)

PART # DESCRIPTION

LONGACRE DIGITAL TIRE GAUGE

Economy digital tire gauge with active display. Range of 0 - 100psi with an automatic zero. Measures in 1/2” lb. increments. Air release button & 14” hose.

72624 BASIC SCALES w/ 12” x 12” PADS

PART # DESCRIPTION

LONGACRE 72624 SCALES

Basic Economy Kart Scales with 12” x 12” CNC Pads, 400 lbs. per pad.

** AVAILABLE BY SPECIAL ORDER **

726278 DXI SERIES MEMORY SCALES

LONGACRE 72628 DXI SCALES

New Memory feature that stores 8 of your setups. Separate display windows. 12” x 12” CNC pads, 400 lbs per pad. 2 year limited

PART # DESCRIPTION

** AVAILABLE BY SPECIAL ORDER **



. : : 45

. : : LONGACRE RACING PRODUCTS (continued)

. : : KART SET-UP ACCESSORIES

50888 AIR DENSITY GAUGE

PART # DESCRIPTION

LONGACRE AIR DENSITY GAUGE

Helps making carb jetting choices easier by reading air density. Includes case and jetting chart.

50540 TIRE DUROMETER

LONGACRE TIRE DUROMETER

Reads from 0 - 100 points and includes a carrying pouch. For more consistent results: Rock the durometer back and forth past straight up and record the highest number reached.

PART # DESCRIPTION

50555 DUROMETER & TREAD DEPT COMBO (Case Included)

LONGACRE DUROMETER &

TREAD DEPTH GAUGE SET

PART # DESCRIPTION

DUROMETER

Reads from 0 - 100 points

TREAD DEPTH GAUGE

Calibrated in 1/32” Accurate to within 1/128th”

22599 LONGACRE SAFETY WIRE (362‟ x .032”) 22598 SAFETY WIRE PLIERS

LONGACRE SAFETY WIRE & PLIERS

PART # DESCRIPTION

50870 LONGACRE STAGGER TAPE

LONGACRE STAGGER TAPE

10‟ x 1/4” tape measure. Makes easy work of measuring tire circumference to get that perfect amount of stagger.

PART # DESCRIPTION

2533 R.L.V. PRO-TOE GAUGE

R.L.V. XTREME TOE GAUGE

A precision instrument for providing an accurate, repeatable, user friendly way of checking camber and toe alignments.

PART # DESCRIPTION

LNSF LEATHERNECK SCALE FIXTURE

LEATHERNECK SCALE FIXTURE

Adjustable height on all four corners as well as length of stand. Includes pegs to hold kart in place for driver entry/exit. Black powder coated.

PART # DESCRIPTION

22163 ACCUTECH STOPWATCH

PART # DESCRIPTION

30 lap memory. Total Elapsed Time, Split Time, or Lap time can be displayed at the same time on two different rows.

(Silver Case Included)

LONGACRE ACCUTECH STOPWATCH

22175 ROBIC STOPWATCH

PART # DESCRIPTION

300 lap memory. Backlight Display. Calculates Avg. MPH. Counts Laps to 999. Shows Total Runtime. 3-line Display.

LONGACRE ROBIC STOPWATCH



. : : 46

. : : BONDHUS HEX TOOLS

. : : ENGINE TOOLS

BLX12 SIZES - .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 BLX9 SIZES - 1.5mm, 2mm, 2.5mm, 3mm 4mm, 5mm, 6mm, 8mm, 10mm

HEX KEY WRENCH SETS

Bondhus hex key wrench sets. Available in S.A.E. or metric.

PART # DESCRIPTION

532TBD (5/32”) T-HANDLE BALL DRIVER 316TBD (3/16”) T-HANDLE BALL DRIVER 14TBD (1/4”) T-HANDLE BALL DRIVER 516TBD (5/16”) T-HANDLE BALL DRIVER 4MMTBD (4mm) T-HANDLE BALL DRIVER 5MMTBD (5mm) T-HANDLE BALL DRIVER

T-HANDLE BALL DRIVERS

Bondhus T-handles are sized to comfortably deliver an appropriate level of torque and assist in preventing damage to ball end tips.

PART # DESCRIPTION

532BD (5/32”) BALL DRIVER TOOL, LONG 316BD (3/16”) BALL DRIVER TOOL, LONG 732BD (7/32”) BALL DRIVER TOOL, LONG 14BD (1/4”) BALL DRIVER TOOL, LONG 4MMBD (4mm) BALL DRIVER TOOL, LONG 5MMBD (5mm) BALL DRIVER TOOL, LONG

STANDARD HANDLE BALL DRIVER

Bondhus standard screwdriver handle ball driver with a comfortable ergonomic designed handle and standard Protanium steel blade.

PART # DESCRIPTION

532LBD (5/32”) BALL DRIVER L-WRENCH 316LBD (3/16”) BALL DRIVER L-WRENCH 14LBD (1/4”) BALL DRIVER L-WRENCH

HEX KEY WRENCH BALL DRIVERS

Bondhus hex wrenches. Manufactured in the Bondhus standard Protanium steel with ProGuard corrosion protection.

PART # DESCRIPTION

FMFG ANIMAL FLOAT HEIGHT GAUGE

PART # DESCRIPTION

ANIMAL FLOAT HEIGHT GAUGE

Tool to set float height on the Animal PZ carburetor made by Faster Motors.

AN114 ANIMAL DEGREE WHEEL

ANIMAL DEGREE WHEEL

Degree wheel with WKA legal specs printed on for easy reference.

PART # DESCRIPTION

FMJD ANIMAL JET SCREWDRIVER

PART # DESCRIPTION

ANIMAL JET SCREWDRIVER

Tool by Faster Motors to make easy removal and installation of animal carburetor main jet.

FMHH ANIMAL HELI-COIL HELPER

PART # DESCRIPTION

ANIMAL HELI-COIL HELPER

Heli-coil helper by Faster Motors. Aids in heli-coiling the Animal exhaust stud holes.

DBFT8 DYNO BACK-FACING TOOL (.825” diameter) DBFT9 DYNO BACK-FACING TOOL (.900” diameter) DTBFT DYNO TAPPET BACK-FACE TOOL (for back-facing tappet boss)

PART # DESCRIPTION

DYNO BACK-FACING TOOLS

Tools to back-face the upper breather chamber and tappet boss of the Briggs flathead engine.

KMCW CARB BOLT WRENCH

PART # DESCRIPTION

FLATHEAD CARB WRENCH

Cut-off carb bolt wrench for the Briggs flathead carburetor.

AVAT ANIMAL VALVE ADJUSTER TOOL

PART # DESCRIPTION

ANIMAL VALVE ADJUSTER TOOL

Valve adjuster wrench for the Briggs Animal O.H.V. engine.

FMPVLP ANIMAL PVL FLYWHEEL PULLER

PART # DESCRIPTION

ANIMAL FLYWHEEL PULLER

Flywheel puller by Faster Motors for new style PVL flywheel removal.

FMIW ANIMAL INTAKE WRENCH

ANIMAL INTAKE WRENCH

Intake wrench by Faster Motors. Featuring a cut down 5mm hex end with a 10mm nut driver end to make getting to the intake bolt a little easier.

PART # DESCRIPTION



2012 - Kart parts | Go kart parts online | Go Kart supplies

Text of 2012 - Kart parts | Go kart parts online | Go Kart supplies

Go Kart Parts, Racing Go Kart Parts, Off-Road Go Karts, Drift … · F.F. Acquisition Corp. YERF-DOG Warranty Dept. 1743 South Horne # 100 Mesa, AZ 85204 1-888-926-655412 * 3 %

Shark 300 Go-Kart

2012 Jex Racing Go Kart Performance Parts - jexmfg.com

Baja Parts Catalog DN250 Go Kart VIN Prefix LBX

AT150S - Go Kart Parts, Racing Go Kart Parts, Off-Road Go ... Manual AT150SS.pdf · 05 at150ss-249 front shock absober black 2 05 at150ss-250 front shock absober red 05 at150ss-251

9-Baja Reaction Parts Catalog - Br150 Howhit 150cc Go Kart Vin Prefix l6k

BERG GO-KART

GO KART TYRES - mitas-moto.com

Constructing a go kart

Go Kart Plans - Two Seat Go Kart - KartFab.com

Go kart slide

Go Kart MID XRX PARTS MANUAL · never operate this go-kart without proper never operate this go-kart on public roads. never operate this go-kart at excesslve speeds. 13 5

Free Go Kart Plans

GO KART FOR SHANE

Go Kart Parts, Racing Go Kart Parts, Off-Road Go Karts, Drift ......When using an automatic centrifugal clutch in any but a racing application, as a rule it is wisest to use the clutch

Only one Person Hauling Go Kart in a Made in USA Kaddy Brochure.pdf · Hauling Go Kart in a Pickup Truck? From the angled position, lift & tilt the Go Kart and Kart Kaddy into Pickup

Go Kart Plans - Two Seat Go Kart - · PDF fileGet the exact parts kit needed to build this go kart. Go Kart Parts Kit Link->

Productsheet Jeep Junior Pedal Go-kart · Jeep Junior Pedal Go-kart Jeep Junior Pedal Go-kart is a unique and newly-designed pedal go-kart in original Jeep design. Children already

KART KIT Assembly Guidelines - Snowmobile Parts, Go Kart ...kart assembly guidelines - 4 - important warnings! read before any assembly or operation live axle warnings: this kart is

Determining the Kart Center of Gravity/Mass (CG/CM)evgrandprix.org/forms/curriculum/Determing the Go Kart Center of M… · Go-Kart Activity Forces in Go Kart Racing Student Name:

Go-Kart Safety

Go Kart Parts, Racing Go Kart Parts, Off-Road Go Karts ... › PDF › Comet › TAV-30_Breakdown.pdf · IS IN PLACE on TAV 30-75. TAV 30-100 does not require Bronze Idler Bushing

TrailMaster MINI XRX - Off Road Go Kart Parts, Racing Go ... Manuals/Mini XRX/TrailMaster Mini... · This set up instruction guides our customer to set up the go kart TrailMaster

Finding go kart for sale

Go Kart Parts, Racing Go Kart Parts, Off-Road Go …COMET Order 203783A 203784A 203785A 203786A 203787A 203788A 203792A 203789A 203790A 203791 A 204331A 213165A 213295A 718" Top Width

DN250 Go-Kart Set Up Instructions - Gardner Inc C… · · 2015-01-26DN250 Go-Kart Set Up Instructions Removal from crate ... 2. Remove parts, hardware box and owners manual. REVB

Drive by Wire Go Kart

National Go Kart Championship

Go Kart MID XRX PARTS MANUAL · 2015. 8. 25. · never operate this go-kart without proper never operate this go-kart on public roads. never operate this go-kart at excesslve speeds

GO-KART 300 XRX PARTS MANUAL - Family Go Karts GO-KART 300 XRX PARTS MANUAL FIG. 1 LEFT CRANKCASE COMP. LEFT CRANKCASE COMP. REF NO. PART NO. DESCRIPTION QTY 1-1 169.03.101 LEFT CRANKCASE

Documents

2012 - Kart parts | Go kart parts online | Go Kart supplies

Text of 2012 - Kart parts | Go kart parts online | Go Kart supplies