2011 Ref Guide

FREE UK MAINLAND NEXT DAY DELIVERY BY 5PM FOR ALL ORDERS UNDER 15 KG

Units H42/43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL Tel: 01352 735400 Fax: 01352 735733 Email: [email protected] www.global-lift.com

Quick Reference Guide

May 2011 See pages 37 & 38 For more TFT Displays


We all know with the ever increasing demands of a busy day it is difficult for Procurement Managers to sift through endless catalogues finding what they need. In an effort to help you select your “high volume” parts quickly, we have compiled a quick reference guide highlighting our Primary Component Range. Of course there is further more detailed information available, just contact our Sales Team on 01352 735400 for further details. We hope you find this booklet useful and welcome your feedback. Just a few reminders…... All prices published already have your usual GLE Trade Discount deducted Our Minimum Order Charge is £40.00 We offer free UK mainland next day by 5pm delivery for orders under 15kg Prices exclude VAT Our daily order cut off time for next day deliveries is 2.30pm

Please refer to our website for our full range of products www.global-lift.com

introduction

1

Global Lift Equipment Ltd H42/43 Ashmount Enterprise Park

Flint, Flintshire, CH6 5YL Tel: 01352 735400 Fax: 01352 735733

Email: [email protected] www.global-lift.com

PEW Electrical Distributors Ltd Unit 1 The IO Centre, 59-71 River Road

Barking, Essex, IG11 ODR Tel: 0870 600 6503 Fax: 0870 600 6603

Email: [email protected] www.pewelectrical.com

Atlas Elevator Equipment Unit B15 Kingswood Business Park

Dublin 22 Tel: 00 353 1 4594106

Fax: 00 353 1 4594025 Email: [email protected]


contents

COMPLETE LIFTS The Global Range of Complete Lifts Page 3

AUTODIALLERS Sarpluscom & Windcrest Page 4

BUFFERS Hydraulic Polyurethane

Page 5

CAR TOPS BS 7255 Compliant Car Top Control Units Page 6

CONTROLLERS Controllers & Controller Spares Page 7

DETECTORS / SAFETY EDGES Full Height Edges & Fixing Kit Vision Shields & Sensors and 3D solutions

Page 8 Page 9

DIVERTOR PULLEYS Divertors with Shafts for Keeper Plates Divertors with Shaft & Supports

Page 10

DOORS - FERMATOR Anti Vandal Doors (EN81-71) Folding Flat Doors Modernisation Operator Kits Schindler QKS Conversions Spares & Tools

Page 11 Page 12 Page 13 Page 14 Page 15

GEARS Montanari Geared Machines Montanari Sheave Brake Montanari Gearless Machines

Page 16 Page 17 Page 18

GOVERNORS & ACCESSORIES

Overspeed Governors Tension Weights Guards & Switches

Page 19-21 Page 22 Page 23

GUIDESHOES & ACCESSORIES

Guide Shoes & Liners Roller Guide Shoes Lubricators & Drip Trays

Page 24 Page 25 Page 26

GUIDERAIL & ACCESSORIES Guiderail, Fishplates & Clips Page 27-28

LOAD WEIGHING Rope & Crown Bar Units Page 29

PIT LADDERS Removable & Fixed Pit Ladder Page 30

PIT PROPS Pit Prop with Electrical Interlock Contacts Page 31

PUSHBUTTONS & FIXTURES

Plates - Car & Landing Pushbuttons Keyswitches & Toggle Switches Indicators & TFT Displays Hall Lantern Arrows

Page 32 Page 33-34 Page 35 Page 36-38 Page 39

SAFETY GEARS Down Only & Bidirectional Page 40

SAFETY ITEMS Barrier, Mats & Notices Safety Wear, First Aid & Fire Extinguisher Kits

Page 41 Page 42

SEATS Lift Car Seats Page 43

SPEECH UNITS Caruso ESY2000 Page 44

TOOL STORAGE Tool Boards & Tool Boxes Page 45

Please refer to our website for our full range of products www.global-lift.com

2


COMPLETE LIFTS

3

To comply with many Specifications all our Complete Lifts are supplied with a Lester Controller.

Please contact our Sales Team for details

Our Lifts are designed by our own in house engineers to meet the requirements of the UK market. We have an excellent in house design team and together with a strong long term partnerships with our specialist manufacturers, we are well placed to offer a full range of lifts from standard home lifts through to bespoke lorry lifts. Our strength is in working closely with our customer at all stages from enquiry, survey, design, drawings through to supply of the lift. The quality of our equipment is rigorously checked prior to despatch. Whilst we do not offer installation we have excellent site support ensuring that we are on hand throughout the installation should product support be needed. We offer assistance with surveys. We would be happy to arrange a site visit for viewing of our equipment upon request throughout the UK. Conventional Hydraulic Conventional Traction MRL Traction Geared MRL Traction Gearless

Scenic Lifts Goods Lifts Vehicle Lifts Bespoke Lifts Structures - we can design and supply with our lifts


SARPLUSCOM KIT

1. The SARPLUSCOM auto dialler is supplied in a high impact polycarbonate box and can be mounted within the car top area. Its com-pact size makes it ideal for new or existing installations. The unit has a push button fitted for the engineers use should they become trapped in the car top area. A loom is supplied to connect the Autodialler to the COP. This carries with it 12vdc signalling for your “Alarm Activated” & “Alarm Received” indicators and the speaker & microphone 2. A speaker and microphone is supplied for mounting behind a grill in the COP. The microphone is sensitive enough to pickup from inside, below and above the lift car so when coupled with the high quality loud speaker the auto dialler does not require any extra units outside of the lift car to comply with EN81. 3. A further engineer’s activation button is supplied on a 5m cable and this is mounted beneath the lift car. The SARPLUSCOM can be programmed remotely by a standard phone or mobile using DTMF signalling or on site with a handset

The SARPLUSCOM requires a battery backed 12vdc supply (extra cost). The machine room intercom is provided by means of a handset and connection card. This card allows easy connection from the telephone jack plug to your trailing flexes (extra cost). The SARPLUSCOM requires 2 flexes for the telephone line and a further 2 if you require the machine room intercom handset. It is not always necessary to use twisted paired cables but is advisable to use this type. To comply with EN81-28 with regards to the alarm filtering, you are required to provide a volt free contact from the controller which closes when the lift is out of service. This contact is put in series with the autodialler alarm button contact. OPTIONAL ITEMS: MACHINE ROOM HANDSET Part No: CS/SAR2HSET MACHINE ROOM HANDSET CONNECTION CARD Part No: CS/MCI10

Global can supply a range of Windcrest units or Just preparation only for new Car operating panels

Part No: CS/SARPLUSAUTO

3. ENGINEER’S RESCUE BUTTON

2. SPEAKER & MICROPHONE

1. AUTODIALLER (LOOM & BUTTON)

autodiallers

4

WINDCREST UNITS


STOCK ITEMS

PART NUMBER

BUFF/YH51 BUFF/YH52 BUFF/YH54

Max strike load

3500 kg 4545 kg 4545 kg

Min strike load

600 kg 600 kg 600 kg

Max rated speed

1m/s 1.6 m/s 2.03 m/s

Strike speed 1.15 m/s 1.84 m/s 2.34 m/s

Stroke 80 mm 175 mm 280 mm

Oil qty (included)

0.5 litres 1.02 litres 1.6 litres

Overall Height

315 mm 540 mm 775 mm

BUFF/YH55

4545 kg

600 kg

2.54 m/s

2.92 m/s

435 mm

2.45 litres

1125 mm

Hydrolift Buffers are complete with a Schmersal Buffer Switch Complete with Oil - Type Mobil DTE 26 (VG68) Fully EC Certified by BSI

PART NUMBER T2/BUFF

T4/BUFF

T5/BUFF

Diameter (mm) 100 165 220

Height (mm) 80 80 80

Compressed (mm) 72 72 72

Nominal Speed 0.4 m/s Maximum Load 1886 kg 6170 kg 9200 kg

Minimum Load 153 kg 310 kg 465 kg

Nominal Speed 0.63 m/s Maximum Load 1137 kg 3000 kg 7100 kg


Nominal Speed 1 m/s Maximum Load 800 kg 2450 kg 6000 kg


D x H 100x80 165x80 220x80

Ø d 35 35 35

Ø d1 17 17 17

S + 1.0 15 15 15

HYDROLIFT HYDRAULIC

POLYURETHANE

buffers

5

STOCK ITEMS


STOCK ITEM

Constructed from high quality steel and finished with a high quality powdered coated bright yellow finish. Main Features In Accordance with BS7255: Colour coded buttons Shrouded push buttons where required 54mm push/pull emergency stop button with integrated status flag indicator Different shaped Test/Normal and door controls for engineer to easily identify when lux levels are low Alarm push button can be illuminated with a 12v supply Metal single gang non-latching 30ma RCD socket outlet with test & reset functions Captive screws to hold front control panel so the panel can be easily removed without totally removing

or losing the fixing screws No part of the control box uses hinges as fixings Additional Features: Car top box is supplied with flanges each side with slots for easy mounting on liftcar top or crown bar Conduit 20mm knockouts at side, back & bottom 15watt low energy high impact bulkhead lamp which requires no tools to remove the bulkhead and

change the screw-in Edison Screw Bulb. Contact Arrangement:

(extra contacts available on request) Main Only Wired - complete with terminals mounted on DIN rail. The Live, Neutral & Earth are wired to the RCD & bulkhead Part No: CTC/MAINWIRED

EN81 & BS 7255 COMPLIANT

TEST/NORMAL 1 N/O & 1 N/C

DOOR OPEN/CLOSED 2 N/O

UP 1 N/C & 2 N/O

DOWN 1 N/C & 2 N/O

COMMON/RUN 1 N/O

ALARM 1 N/O and 1 off 12v Bulb

LIGHT ON/OFF 1 N/O

STOP 1 N/C

Car tops

6


The Hidra system uses a common processor with interface configuration to suit Hydraulic & Traction lifts (2 Speed & VVVF). On board diagnostics are standard. The system operates with only 9 wires in the shaft (5 serial communication for signalling, 2 lock circuit & 2 safety circuit). All slowing and stopping equipment mounted on the car. This makes for rapid and economic installation.

The Hidra is supplied with its own associated car top control, shaft proximity switches, wiring/flexes and slowing and stopping equipment. Simplex or Duplex Up to 32 Floors Up to 1.6m/s (traction) Single, through car, selective & adjacent entrance options Advance door opening MRL for traction lift solutions Options: built in autodialler, speech unit, pre-wired car & landing fixtures

To comply with many Specifications all our Complete Lifts are supplied with a Lester Controller.

We stock a full range of Global Hidra Controller Spares for next day delivery. Spares are also available from the PEW Trade Counter in London. .

CONTROLLER SPARES

GLOBAL HIDRA

6-8 WEEK DELIVERY

Please contact us for a competitive quote.

controllers

7

LESTER CONTROLLERS

Please contact sales for further info.


MODEL Max 74H (EN81-70) 104-104

Power Supply 17 - 230 vac / dc

Absorption 6 va 115 / 230 vac 50ma / 24vdc

Output 230 vac / 5a , 80 vdc / 0.5a 24 vdc / 5 a

Relays Stop 0-60 s

Reaction Time < 100 ms typ. 65 ms

Working Field 0 - 5m

Surveillance Height 1800mm

No of Rays 74

Height of Edges

Cross Section 16mm wide x 12mm deep

Connector WAGO 6 x 5.08

Wire Length 5 m

IP Rating Controller IP54

IP Rating Optical Edge IP65

Vibration Resistance IEC 68-2-6 / IEC 68-2-29

Temperature Field -20 TO +65 degrees C

1900mm

UNIVERSAL FIXING KIT

Light Curtain (103-972) Controller integrated into opto-edges. Criss-cross light beams remain fully active until the doors are closed. Protection height up to 1800 mm Operating range up to 3 metres Pluggable leads Supply voltage 10-30 VDC For new lifts Output: VCC/GND 0.2A push-pull NO/NC selectable (select-input) 12mm x 17mm cross section Part No: DD/MINI79

STOCK ITEM

FULL HEIGHT DETECTORS

CEDES MINI-MAX 79

2 YEAR GUARANTEE ON ALL CEDES PRODUCTS

detectors

8

STOCK ITEMS

The MAX 74H detector is DDA, EN81-70 Compliant


To suit the Max 74 range of full height Door Detectors. A set of snap on, black plastic shield that covers the receiver/emitter from sight but allows the infra red light to pass through. (Image shows Vision Shield with aluminium large spacer - not included) Part No: DD/VISION (102-423)

STOCK ITEM

TECHNICAL DETAILS

Dimensions Spherical Ø 56 mm

Resolution

Detection spot Ø at 2m: Type N: 300mm

Operating range 0.6 to 4 metres

Operating voltage 12-40 VDC

Temperature range -20°C to +60°C

Diffuse-reflective sensor, operated with invisible infrared light. Used for entry & doorway control and detection/protection for automatic doors. Diffuse reflective sensor with background rejection Automatic calibration Relay output Excellent detection capability No adjustment required Degree of IP65 protection Long device life of relay outputs Simple surface or rear panel mounting Part No: DD/TLS1 (101-618) Mounting Bracket (not illustrated) Part No: DD/TLS2 (101-675)

TLS250N SENSOR

MAX 74 VISION SHIELD detectors

9

STOCK ITEMS

The IMS100 Door Sensor utilises the latest “Time Of Flight” camera technology to monitor the entrance area of a lift. Easily fitted within the lift car entrance and used with the Cedes Max74 range or other existing 2D door detectors or single beam sensors that utilise standard contact basic signalling.

The IMS100 has proven by maintenance companies to im-prove the safety and performance of lifts in particular when it comes to reducing elevator door damage in cargo or bed lift installations. This means major savings in repairs and out of service times for their customers.

The IMS 100 Kit includes Flush & Surface Mounting options

IMS 100 3D DETECTOR

Global Solution A : Includes IMS100 Sensor, mounting kit, cable & power supply (when used with an existing light curtain) Part Code: DD/108-175

Global Solution B : Includes IMS100 Sensor, mounting kit, cable, power supply & MAX 74H Door Detector (comes complete with DDA Compliant full height light curtain - 12mm width) Part Code: DD/108-175/DD/MX74H STOCK ITEM


MONTANARI TAB 60 High load capacity Divertor Pulley on Ball Bearings with Shaft for Keeper Plates

MONTANARI TAB 80 High load capacity Divertor Pulley on Ball Bearings with Shaft and Supports

Global Lift Equipment are the Principal Distributor for Montanari Equipment

We offer a full range of Divertors.

Please contact the Sales Department for details.

3-4 WEEK DELIVERY

TAB 60

TAB 80

Divertor pulleys

10


Global Lift Equipment are the Sole UK Distributor for FERMATOR doors with solutions for new lifts and modernisation. VVVF CAR DOORS 40/10 LANDINGS 50/11 LANDINGS FOLDING DOORS HINGED DOORS GLASS DOORS ANTIVANDAL DOORS TO EN81-71 SLIM SYMMETRIC LB FOLDING CAR & LANDING For further details, please ask for a copy of the latest Fermator Technical Catalogue.

FERMATOR DOORS

ANTI VANDAL DOORS We offer a full Anti Vandal Door Solution to Comply with EN81-71

Kicking plate located in bottom sill.

Kicking plate on top track hanger

Electronic triangular door release, remains locked until supply removed from lock and then doors can be opened with special door release.

Full EN81-71 Compliant Entrances can be supplied or alternatively door panel

construction utilised on standard equipment to give a greater strength

and durable landing door

6-8 WEEK DELIVERY

Please contact Sales for further details

Finger guard to prevent access to rear of panel, Fitted to fast door only on side opening entrances.

FINGER GUARD

doors

11

STEEL TUBING

Car & landing panels reinforced with steel tubing.

Car door locking to car operator.


FLAT MODEL FOLDING CAR DOOR

FERMATOR DOOR SOLUTION To Replace An Aljo Busmatic Door

Fermator Flat Model 4 Leaf Folding Car Door Set

With electronic control card (C4T) stainless steel door panels with vision

panels, bottom track & door shoes.

. NB: special door sizes are a 6 week delivery.

Mechanically Replaces The ALJO Busmatic Door. 220V-240VAC Supply. Simple Signalling: Door operation requires signalling between 17V-

240Vac/dc Open/Closed/Common (if an open signal is not available, the C4T card can be configured to

operate on a door close/ramp lift signal only). Signalling back to the controller consists of car gate contact only No door limits back to the controller given as everything

is taken care of by the C4T card. Automatic Door Reversal On Detecting Obstruction. C4T Card Functions: Rocker power on/off switch Test push button to cycle doors LED to show working operation Timer relay- can be used in controller circuit to add

after the doors are closed to allow ramp to clear Optional Mechanical Ramp Can be added to the side of the door operator that is operated by the movement of the doors

TECHNICAL DETAILS

doors

12

Ashmount Model from Stock 800x 2000 (overall 850mm)

Clear height 2000mm

Between tracks 2015mm Part no: FLDSET/FLAT800VP

Reus Model from Stock 800x 1985 (overall 850mm)

Clear height 1985mm

Between tracks 2000mm Part no: FLDSET/FLAT800VP/1985


In addition to full operators with hangers & tracks Global can offer a universal operator with VVVF drive that can be used in many existing applications. ♦ KITVF-XT - A belt drive with simple universal door to belt attachment with a spring loaded trigger mechanism to lock the door “holding“ the door shut in the closed position These operators are suitable for almost any applica-tion where the existing skate between car and land-ing doors is fixed, i.e. flat blade or channel type and existing doors are separately coupled by existing lanyards/aircords. None aircorded doors between 700mm-1000mm please contact sales. For larger entrances or heavier doors, operators are available with 2 motors at extra cost.

PART NUMBER Aircorded side

Motor Total mm

MODOP/ KIT05XT1MxH Upto 500 1 900

MODOP/ KIT07XT1MxH 550 to 700 1 1100




Aircorded centre

Upto to 700

750 to 800

850 to 900

950 to 1100 (a1)

n/a

MODOP/ KIT15XT1MxH 1250 to 1500 n/a 2 1900

TOTAL

KIT VF XT OPERATOR

Please specify on your order:

The hand required ( (opens to as viewed from the landing) If 2 motors are required (additional cost)

Successful conversions include: Otis 7300 Ac Resistance Express AC (housing) Dewpar FL Range (fixed blade) Otis 955OT DC 68

Skate to be securely fixed to high speed door within the first 200mm of the door leading edge

SKATE TRAVEL

Door operators

13

Skate must be securely fixed in 4 positions

to the door panel

x - indicate for LEFT HAND & R for RIGHT HAND as viewed from the landing for side opening but for centre parting please indicate if the clutch/skate is mounted on the left or right hand door set as viewed this landing. (a1) - note for this option a second motor must be costed for.


SCHINDLER QKS KITS Door operators

14

MOD310 RANGE

New range of door equipment to modernise SCHINDLER Equipment QKS 8, QKS9, QKS11 & Varidor 10

Produced at the Original French Schindler Factory, owned by Fermator. Operators are supplied with either interface adapter kits to enable the re-use of the existing door panels or with new door panels (with or without new sills)

Features:

Choice of renovation level, total or partial.

No prior work required to the car fronts

Existing car fronts and header preserved

Overall dimensions similar to the original operator

Total compatibility with existing landing doors

Lift returned to service in 48 hours or less

Latest generation of VVVF

Drive through linear belt

Fewer moving parts

Fewer electrical contacts

Original Schindler QKS8 Operator Before Modernisation

Fermator QKS8 Operator & Doors Conversion

6-8 WEEK DELIVERY


Replacement VVVF drive unit for Fermator VVVF Car Operators. Backward compatible with all Fermator VVVF modules. Part No: 90.30.10/V4

Global stock a full range of Fermator Door Spares for next day delivery Spares are also available from the PEW Trade Counter in London A separate catalogue detailing Fermator Door Spares is available on line

For use on VF Fermator Door Operators Fault diagnostic tool. Custom modification of internal program parameters and performance characteristics. Recommended for 2 motor and modernisation operators. Part No: 90.34.00

FERMATOR VVVF4

DOOR PROGAMMING TOOL

Door spares/tools

15


M104 Static Load 12000 kg

PENTA Static Load 3000 KG

PENTA 830 Static Load 3200 KG

M50 Static Load 650 KG







Global Lift Equipment are the Principal Distributor for Montanari Machines

MONTANARI GEARED

Montanari machines can be easily split down and re-assembled on site without the need for a specialist engineer. Works can be carried out by any competent lift engineer and warranty will not be affected. Please contact the Sales Team for details. We can offer deliveries for Montanari GEARED Machines from 5 weeks, dependent on model. Please contact the Sales Department for a competitive quote.

DIS-ASSEMBLY & RE-ASSEMBLY

gears

16


European Directive 95/16/CE requires that lift car movement be controlled in ascent. EN81 covers this requirement under Clause 9.10 and Montanari offer a range of machines which control ascent with a brake on the traction sheave shaft as part (D) in clause 9.10.4. Advantages For Modernisation Eliminates the need for a new safety gear as brake provides ascent control Existing guide rails can be reused as there are no additional stresses during braking Fitting is quick and easy as brake comes mounted on the new machine No need for new expensive, heavy bi-directional tension weight Advantages over Rope Brake Type System - Sheave Brake Fitted Direct To Machine No additional builders work or structural changes required No special fabrications or special mounting requirements

***These advantages considerably reduce site & labour costs*** Requirements The brakes are of a passive type and are applied when the voltage is cut. The lift must be fitted with an electrical security device which cuts the voltage in the event of excessive speed in ascent. Normally this device is the speed governor which activates the safety gear on the lift car. Signal required from control system to apply sheave brake when lift stopped and fused power supply and signals required for PWM Module. Sheave Brake is supplied with a PWM Brake Signal Booster Module Sheave Brake is TUV Certified

MACHINE LEAD TIMES FROM 6 WEEKS (dependent on model)

Contact Sales for Details.

SHEAVE BRAKE GEARS

17


MDD Gearless

Static Load

4000 KG

MG250 Gearless

Static Load

3400 KG

MCG150 Gearless

Static Load

2000 KG

Global Lift Equipment are the Principal Distributor for Montanari Machines.

MONTANARI GEARLESS

We can offer deliveries for Montanari GEARLESS Machines from 6-8 weeks, dependent on model.

Please contact us for a competitive quote.

GEARS

18


MONTANARI RQ GOVERNOR


19

Competitive Price Compact Design Test Groove Lift Speed up to 2.6m/s OPTIONS: Bi-directional or Down Only 200 / 250 / 300 mm Pulley Narrow Base Encoder (Universal Line Driver AD26LS31) Remote Trip & Reset (12VDC, 24VDC, 230AC) Anti Creep for Uncontrolled Movement Control Separate Governor Guard

Model

Pulley Diameter

Lift Speed

Tripping Speed

Rope Diameter

RQ200

200mm

Up to 1.74m/s

0.65 to 2.00m/s

6 to 6.5mm

RQ250

250mm

Up to 2.17m/s

0.80 to 2.50m/s

6 to 8mm

RQ300

300mm

Up to 2.61m/s

0.97 to 3.00m/s

6 to 8mm

4 WEEK DELIVERY


Global are official distributors for PFB equipment and stock a large quantity of their products including most of the Overspeed Governors shown above. Please contact our Sales Department for further details on PFB Lift Equipment.

R5 DOWN ONLY OVERSPEED GOVERNOR 200mm pulley Electrical contact Contract speed: 0 to 1.46 m/s Tripping speed: As Per EN81 Rope size: 6 to 6.5 mm Part no: GV/R5 5-6 WEEK DELIVERY

R6 DOWN ONLY OVERSPEED GOVERNOR 300mm pulley Electrical contact Contract speed: 0 to 1.82 m/s Tripping speed: As Per EN81 Rope size: 6 to 8 mm Part no: GV/R6 5-6 WEEK DELIVERY

LK200 BIDIRECTIONAL OVERSPEED GOVERNOR 200mm pulley Electrical contact Contract speed: 0 to 1.48 m/s Tripping speed: As Per EN81 Rope size: 6 to 6.5mm Part no: GV/LK2 5-6 WEEK DELIVERY

LK300 BIDIRECTIONAL OVERSPEED GOVERNOR 300mm pulley Electrical contact Contract speed: 0 to 2.37 m/s Tripping speed: As Per EN81 Rope size: 6 to 8 mm Part no: GV/LK3 5-6 WEEK DELIVERY

R10BF GRIPPER OVERSPEED GOVERNOR 315mm pulley Electrical contact Contract speed: 0.65 to 2.25m/s Tripping speed: As Per EN81 Rope size: 8 to 10 mm Remote reset not available Part no: GV/R10 5-6 WEEK DELIVERY

R12BF GRIPPER OVERSPEED GOVERNOR 345mm pulley Electrical contact Contract speed: 0.7 to 4 m/s Tripping speed: As Per EN81 Rope size: 8 to 10mm Remote reset not available Part no: GV/R12 5-6 WEEK DELIVERY

PFB DOWN ONLY

PFB BI-DIRECTIONAL

PFB GRIPPER

20



RG300 TAB 159 ROPE CLAMPING 300mm pulley 2 off IP65 electrical contacts Contract speed: 0.4 to 2m/s Tripping speed: As Per EN81 Part no: GV/TAB159 4 WEEK DELIVERY

A full range of Montanari Governors are available with the following options:

Standard, narrow & shielded rope passage With and without remote control With and without test groove 200 and 300mm diameter pulleys Down only or bi-directional Right hand (clockwise rotation) or left hand

(anti-clockwise rotation) available.

Governors illustrated are shown as right hand. For further details please ask for a copy of the Montanari Governor Selection Table. We have featured some typical examples.

RH300 TAB 140 300mm pulley Standard base plate With test groove Contract speed: 0.4 to 1.74m/s Tripping speed: As Per EN81 Part no: GV/TAB140 4 WEEK DELIVERY

RG200 TAB 131 200mm pulley Standard base plate Contract speed: 0.15 to 0.3 m/s Tripping speed: As Per EN81 Part no: GV/TAB131 4 WEEK DELIVERY

RG200 TAB 139 200mm pulley Narrow base plate With remote control Contract speed: 0.3 to 1m/s Tripping speed: As Per EN81 Part no: GV/TAB139 4 WEEK DELIVERY

RG300 TAB 154 300mm pulley Shielded rope passage Without test groove Contract speed: 0.4 to 2m/s Tripping speed: As Per EN81 Part no: GV/TAB154 4 WEEK DELIVERY

MONTANARI RH 300

MONTANARI RG 200

MONTANARI RG 300

21



R4 TENSION WEIGHT TO SUIT DOWN ONLY GOVERNOR 200 or 300mm pulley Electrical contact Weight: 13 kgs Part no: TW/R4/200 or 300 LK TENSION WEIGHT TO SUIT BIDIRECTIONAL & GRIPPER GOVERNOR 200 or 300mm pulley Electrical contact Weight: 50 kgs Part no: TW/LK/200 or 300

TAB 161 TENSION WEIGHTS With electrical contact. 200mm Pulley, one direction, weight 12kg Part no: TW/161/200 300mm Pulley, one direction, weight 12kg Part no: TW/161/300 200mm Pulley, bi-directional, weight 36kg Part no: TW/161/BD200 300mm Pulley, bi-directional, weight 36kg Part no: TW/161/BD300 Tension weight guards available on request. 4 WEEK DELIVERY

PFB TENSION WEIGHTS

MONTANARI TENSION WEIGHTS

22

GOVERNORS & ACCESSORIES PIT MOUNTED TENSION WEIGHT

MONTANARI TEV TENSION WEIGHT Competitive Price Compact & Slim Floor Mounting Complete With Rope Guarding Complete With Manual Reset Safety Switch Suitable for use with RQ and Rope Clamping TAB150 OSG

OPTIONS: 85kg Weight for Bi-directional Model 30kg Weight for Down Only Model 200 / 300 mm Pulley Part no: TW/TEV


TENSION WEIGHT GUARD For PFB Tension Weights NB: mandatory to comply with EN81 Part no: TW/GUARD STOCK ITEM

TENSION WEIGHT SWITCH For PFB Tension Weights Part no: GV/SW/TW STOCK ITEM

GOVERNOR SWITCH & REMOTE RESET SOLENOID PFB Overspeed Governors are available with the above switch but are factory fitted by PFB. 5-6 WEEK DELIVERY REMOTE TRIP & RESET FEATURE For PFB Governors Overspeed Governors are available with the above feature but are factory fitted by PFB. 5-6 WEEK DELIVERY

PFB GUARDS

PFB SWITCHES

23


TENSION WEIGHT SWITCH For MONTANARI Tension Weights Part No: GVSW/TWMONT STOCK ITEM

MONTANARI SWITCHES


T409 Spring Loaded Guide Shoe with 16mm Plastic Liner

Max load: 1500kg

Part No: SHOE/T409

T305 Guide Shoe with 16mm Brass Liner

Max load: 4000kg

Part No: SHOE/T305

T306 Guide Shoe with 16mm Brass Liner

Max load: 7000kg

Part No: SHOE/T306

T410 Spring Loaded Guide Shoe with 16mm Plastic Liner

Max load: 2500kg

Part No: SHOE/T410

GUIDE SHOES & LINERS

ALL STOCK ITEMS

Maximum Loads quoted are the maximum load the Shoe will withstand horizontally in the XX & YY Axis. Other size shoes are available - Please contact Sales for details.

24

LINERS TAB60 TO SUIT ALUMINIUM SHOES - TAB 255 & TAB 256 Liner sizes: 5,6,9,10,12,15,16mm

Standard Perlon Liner Part No: LINERPER/TAB260 STOCK ITEM Self Lubricating Polythene Liner Part No: LINERPOL/TAB260 4 WEEKS

please specify guide blade width when ordering

TAB 255 Aluminium Fixed

Sliding Shoe (see below for liners)

Max load: 1500kg

Part No: SHOE/TAB255

TAB 256 Aluminium Swivel

Sliding Shoe (see below for liners*)

Max load: 1500kg

Part No: SHOE/TAB256

Guideshoes & ACCessoRies


6 WEEK DELIVERY

STOCK ITEM

RFS-1 Roller Guide Shoe

Part No: SHOE/RFS1

Other sizes available for larger loads (special order)

TECHNICAL DETAILS Roller Dimension A 100mm Ø 25mm wide

Roller Dimension B 100mm Ø 25mm wide

Roller Dimension C 120mm Ø 21mm wide

Height H 125mm

Length E 156mm

Dimension a 12mm

Dimension k 5-40 mm

Loads for max 2.5m/s (N) 2100

RFGK1 Spring Loaded Roller Guide Shoe Part No: SHOE/RFGK1

RFGK2 Spring Loaded Roller Guide Shoe Part No: SHOE/RFGK2

Technical Details RFGK1 (300 090) RFGK2 (300 091)

Roller Dimensions 75mm Ø 25mm wide 100mm Ø 25mm wide

Height 153mm 160mm

Length 180mm 160mm

Max. capacity 2000kg 2500kg

RFS-1 ROLLER SHOE

SPRING LOADED ROLLERS

25



OIL LUBRICATOR - SQUARE SHAPE

Suitable for 5mm to 16mm Guides

Fits PFB guide shoes: T409, T410, T305 & T306

Part No: LUBR/SQ

STOCK ITEM

STOCK ITEM

OIL LUBRICATOR - HORSESHOE SHAPE

Suitable for 5mm to 16mm Guides Fits Acla Aluminium Guide Shoes

TAB255 Aluminium Fixed Guide Shoes & TAB256 Aluminium Swivel Shoes

Part No: LUBR/HSHOE

UNIVERSAL DRIP TRAY/OIL COLLECTOR

Suitable for 5mm to 16mm Guides

Part No: DRIPTRAY

26


STOCK ITEM

LUBRICATORS

DRIP TRAYS


Global stock a variety of Guiderail, Fishplates and Clips Please see the following page for sizes. Full details are on our website. For other types of rail please contact us for details.

SAVERA TYPE SUPER

27

Guiderail & aCCeSSOrieS


Stock Code CLIPS (Forged & Sliding)

CLIP/M1 M1 FORGED CLIPS (M10) CLIP/M2 M2 FORGEDCLIPS (M12) CLIP/M3 M3 FORGED CLIPS (M14) CLIP/M4 M4 FORGED CLIPS (M16) CLIP/M5 M5 FORGED CLIPS (M18) CLIP/SL1 SL1 SLIDING CLIPS CLIP/SL2 SL2 SLIDING CLIPS CLIP/SL3 SL3 SLIDING CLIPS CLIP/SL4 SL4 SLIDING CLIPS CLIP/SL5 SL5 SLIDING CLIPS

Stock Code FISHPLATES (with 8 sets of Fixings per plate)

FISHT45 T45 FISHPLATES FISHT50 T50 FISHPLATES FISHT70 T70 FISHPLATES FISHT75 T75 FISHPLATES FISHT89/90 T89 & T90 FISHPLATES FISHT125/7 T125 & T127 FISHPLATES

Stock Code GUIDERAIL (5m & 2.5m lengths)

T45A/2.5M T45/A 2.5M RAIL (Plain End) T45A/2.5MJOINT T45A 2.5M RAIL (Jointed End) T45A/5M T45/A 5M RAIL (Plain End) T45A/5MJOINT T45A 5M RAIL (Jointed End) T50A/2.5M T50/A 2.5M RAIL (Plain End) T50A/2.5MJOINT T50A 2.5M (Jointed End) T50A/5M T50/A 5M RAIL (Plain End) T50A/5MJOINT T50A 5M (Jointed End) T701A/2.5M T70/1A 2.5M RAIL T701A/5M T70/1A 5M RAIL T753B/2.5M T75/3B 2.5M RAIL T753B/5M T75/3B 5M RAIL T89B/2.5M T89B 2.5M RAIL T89B/5M T89B 5M RAIL T90A/2.5M T90A 2.5M RAIL T90A/5M T90A 5M RAIL T90B/2.5M T90B 2.5M RAIL T90B/5M T90B 5M RAIL T125B/2.5M T125B 2.5M RAIL T125B/5M T125B 5M RAIL T1271B/2.5M T127/1B 2.5M RAIL T1271B/5M T127/1B 5M RAIL T1272B/2.5M T127/2B 2.5M RAIL T1272B/5M T127/2B 5M RAIL

DETAILS

Suits rail: T45/A, T50/A Suits rail: T70-1/A, T75-3/A-B Suits rail: T89/A-B, T/90/A-B Suits rail: T125/B, T127-1/B, T127-2/B Suits rail: T140-1/B, T140-2/B Suits rail: T45/A, T50/A, Suits rail: T70-1/A Suits rail: T75-3/A-B Suits rail: T89/A-B,T90/A-B, T127-1/B Suits rail: T125/B, T127-2/B, T140-1/B, T140-2/B

DETAILS

8mm thick 8mm thick 8.5mm thick 8.5mm thick 13mm thick 17mm thick

DETAILS

Size: 45 X 45 X 5mm (T45) Size: 45 X 45 X 5mm (T45) Size: 45 X 45 X 5mm (T45) Size: 45 X 45 X 5mm (T45) Size: 50 X 50 X 5mm (T50) Size: 50 X 50 X 5mm (T50) Size: 50 X 50 X 5mm (T50) Size: 50 X 50 X 5mm (T50) Size: 70 X 65 X 9mm (T70) Size: 70 X 65 X 9mm (T70) Size: 75 X 62 X 10mm (T75) Size: 75 X 62 X 10mm (T75) Size: 89 X 62 X 16mm (T161) Size: 89 X 62 X 16mm (T161) Size: 90 X 75 X 16mm (T90) Size: 90 X 75 X 16mm (T90) Size: 90 X 75 X 16mm (T90) Size: 90 X 75 X 16mm (T90) Size: 125 X 82 X 16mm (T125) Size: 125 X 82 X 16mm (T125) Size: 127 X 89 X 16mm (T12) Size: 127 X 89 X 16mm (T12) Size: 127 X 89 X 16mm (T160) Size: 127 X 89 X 16mm (T160)

28

Guiderail & aCCeSSOrieS


The LLEC5F system measures the deformation of the elevator crosshead. The sensor/electronic unit is fitted on the crosshead of the lift car near the rope anchorage. Complete with 220-24v Transformer. The system can be installed on traction lifts and some hydraulic installations.

The LLEC5R system measures the tension increase of traction ropes on which the sensor is fixed (for 2-7 cables from 8-13mm Ø). The maximum load is 5000kg (weight of lift car + frame + maximum load) Recommended for fitting on top of the lift car. Complete with 220-24v Transformer. The system can be installed on both traction & hydraulic installations.

Compensation chains on lift

Number of Cables

Diameter of Cables

Power Supply Voltage

Part No Delivery

No Chains 2 to 7 8 to 10mm 220V LOAD05 STOCK

No Chains 2 to 6 12 to 13mm 220V LOAD06 STOCK

With Chains 2 to 7 8 to 10mm 220V LOAD08 4 WEEKS

With Chains 2 to 6 12 to 13mm 220V LOAD09 4 WEEKS

Compensation chains on lift

Power Supply Voltage

Part No Delivery

No Chains 220V LOAD04 STOCK

With Chains 220V LOAD07 4 WEEKS

LLEC5R (rope mounting)

LLEC5F (cross head mounting)

LOADWEIGHING

29


FIXED MODULAR LADDER 1500 mm overall length 300 mm overall width Mild Steel Regulation safety orange paint finish Wall or wall/floor mounting Distance from ladder from wall when fixed is 50mm Rung Depth: 50mm Rung Thickness: 6mm Rung Spacing: 245mm Includes: 600mm grab rail 2 pairs of wall brackets 1 pair of floor brackets Fixing screws Part No: PEW/LADDER-2 Modular extension pieces also available, please contact sales for details.

STOCK ITEM

STOCK ITEM

REMOVABLE PIT LADDER 2050 mm overall length 305 mm overall width Lightweight aluminium construction Changeable anti-skid shoes Anti-skid rungs The ladder is secured by 5mm thick steel chequer plate hook profile, extending 100mm which also acts as a track locator Part No: PEW/LADDER-1 Optional wall mounting bracket also available, please contact sales for details.

PIT LADDERS

30


PIT PROP WITH ELECTRICAL INTERLOCK CONTACTS Consisting of Prop, Electrical Interlock, Wall Mounted Bracket, Floor Mounting Boot & Fixings. Manufactured from 4mm Steel Box Section Painted in Regulation Yellow Standard Length: 2200mm Section Size: 50mm x 50mm SWL: 1800 kg Prop base slides securely into the mounting boot which is permanently fixed to the pit floor. The boot has two 6mm steel strips attached to its underside enabling level fixing if the pit floor is uneven. When not in use the prop is secured in an upright position by the wall mounted bracket. The electrical interlocking facility consists of a pre-fixed limit switch mounted to the rear of the wall mounted bracket. When the prop is removed from the bracket, the lift is rendered electrically inoperative until the prop is replaced to its original position. Part No: PEW/PITPROP

PIT PROPS

31

STOCK ITEM


Gilda H23 Car & Landing Stations with metal end caps. Finishes: Brushed Stainless Steel Mirror Stainless Steel Brass Coloured Brushed Stainless (PVD) Brass Coloured Mirror Stainless (PVD) Widths: 65mm, 100mm, 150mm & 200mm Lengths: 200mm to 1107 Depth: 23mm from wall Surface mount with hidden fixings - no need for cut outs Will incorporate majority of DMG Fixtures

Part Number Width Height Components Dely

Special Order 65mm 250mm 1 off BL red Push & Comfort Tone 4 wks

Special Order 65mm 250mm 1 off BD red/blue Push & Comfort Tone 4 wks

DMG/BF2271PB 100mm 227mm 1 off BL red Push & Comfort Tone STOCK

DMG/BF2272PB 100mm 227mm 2 off BL red Pushes & Comfort Tone STOCK

DMG/BD3071PB 100mm 307mm 1 off BD red/blue Push & Comfort Tone STOCK



DMG/BD5072PB 100mm 507mm 2 off BD red/blue Pushes & Comfort Tone STOCK

Various size landing stations available from stock (see below) COPs and other size landing stations - delivery 4/5 weeks

Other plates are available in different finishes. Please contact Sales for details.

SURFACE MOUNT PLATES PUSHBUTTONS & FIXTURES

32


Stainless steel pressel and stainless steel halo Simultaneous illumination of halo & tactile legend. Pressel backward compatible with original BF range EN81-70 compliant Round (shape K halo), Red illumination, 24v buttons kept in stock

Part No: DMG/BFKC725VRL/(advise legend) STOCK: -1, B, G, UG, 0, 1, 2, 3, 4, 5, 6, DOP, DCP, Alarm, Arrow, Up/Down Arrow Raised exit floors: G & 0 Other legends, Square shape buttons & blue or amber illumination are available - 4 WEEK DELIVERY

Structure polycarbonate

Mounting 3mm projecting through faceplate

Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm

Pushbutton 1.8mm stroke

Wiring Wires screwed on terminals

Illumination 4 red LED

Life 2500000 operations

TECHNICAL FEATURES

Protection IP51 (dust & vertical water fall)

Contacts 1 or 2 contacts, 2 contact version N/O only 1 contact version N/O & N/C

Stainless steel pressel and stainless steel halo Illumination of halo & tactile legend in Red & Blue Pressel backward compatible with original BF range EN81-70 compliant Round (shape K halo), Red/Blue illumination, 24v buttons kept in stock

Part No: DMG/BDS24BRS/advise legend STOCK: -1, B, 0, G, 1, 2, 3, 4, 5, 6, DOP, DCP Alarm, Arrow, Up/Down Arrow Raised exit floors: 0 Other legends, Square shape buttons & blue or amber illumination are available - 4 WEEK DELIVERY OTHER COLOURS SPECIAL QUANTITY ORDER

Structure polycarbonate

Mounting 3mm projecting through faceplate

Fixing Frontal mounting fixed by screw-cut ring. Fixing thickness 0.8mm-5mm

Pushbutton 1.8mm stroke

Wiring Wires screwed on terminals

Illumination Acceptance 4 led / Legend 1 led

Life 2500000 operations

TECHNICAL FEATURES

Protection IP51 (dust & vertical water fall)

Contacts 2 changeover contacts

Mounting projecting over plate surface Fixing without screws or studs Contact holder clip fixed on button body Replacing halo changes the shape of the button Halo Colours: Stainless Steel (K only) /Claret/Blue/Grey/Yellow/Red/Green &

Chrome

BL SINGLE ILLUMINATION

BD DUAL ILLUMINATION

BL & BD GENERAL


33


TECHNICAL FEATURES

Operating Stroke

1.8mm activation

Life 1500000 operations min

Illumination Red/Blue or Amber high density LED 12/24Vac/dc or 120Vac. Also available non illuminated.

Contacts 1 or 2 microswitches, C-NO/NC each. Separate circuits for microswitches & illumination

Anti Vandal Solid Stainless Steel Pushbutton Suitable for hostile environments Front mounting without studs 3 profiles available - Moon, Disc & Classic 3 colours available - Blue, Amber & Red 2 tags available with/without Braille - Caesar & Brutus EN81-70 DDA Compliant EN81-71 DDA Compliant Suitable for Fire Fighting Lifts Brass PVD Button also available Special order—white illumination available

4 WEEK DELIVERY

Fixing without screws or studs Contact holder clip fixed on button body Replacing halo changes the shape of the button Same cutout arrangement as BF, BL & BD button range LED illumination - Red, Amber, Blue or Green Various message displays available: LIFT HERE, IN USE, ALARM, OVERLOADED etc DDA Pictograms: ALARM ACTIVATED, ALARM RECEIVED Contact Sales for Part Numbers & Availability.

STOCK ITEMS

ANTI - VANDAL BUTTONS

BW INDICATORS


34

PANZER BUTTONS

SHERMAN BUTTONS

BRUTUS TAG Tactile or

Braille Tactile

CAESAR TAG Tactile or

Braille Tactile


Fixing without screws or studs Contact holder clip fixed on button body Replacing halo changes the shape of the button Same cutout arrangement as BF, BL & BD button range Illuminated halo Key Switches are STOCK ITEMS, supplied as standard with round Stainless Steel Halo. Please advise on your order if halo colour/shape required differs. For halo colour/shape see page 33

Part No Function CFK117VSL Spring Return CFK217VSL 2 Position/1 Remove CFK227VSL 2 Position/2 Remove

Each Key Switch comes with 2 keys (B3231). Replacement set of 2 off B3231 Keys Part No: DMG/CFK/KEYSTD Special profile keys & switches are available as special order. We can not supply replacement special keys

4 WEEK DELIVERY

KEY SWITCHES

STOCK ITEM

TOGGLE SWITCHES

Fixing without screws or studs Contact holder clip fixed on button body Same cutout arrangement as BF, BL & BD button range IP51 protected Replacing halo changes the shape of the button For halo shapes and colour, see page 33 Other Emergency Switches are available, please contact Sales for details.


35


DOT MATRIX OR 7 SEGMENT DISPLAY STOCK ITEMS

Red or Blue Display. With or without Bi-tonal Gong. Size: 108mm x 75mm Also available as an Anti Vandal Indicator (special order)

DOT MATRIX OR 7 SEGMENT DISPLAY 4 WEEK DELIVERY

Red or Blue display. Alarm, Overload, Pictogram & Indicators. Lift Data and Lift Company Logo can be displayed. Size: 134mm x 134mm. Also available: Fire fighting & Anti Vandal model Indicators.

Part no Type Colour Gong

DMG/LIP/SEGREDNG LIP 7 Segment Red No

DMG/LIP/SEGREDG LIP 7 Segment Red Yes

DMG/LIP/SEGBLNG LIP 7 Segment Blue No

DMG/LIP/SEGBLG LIP 7 Segment Blue Yes

DMG/LIP/DMREDNG LIP Dot Matrix Red No

DMG/LIP/DMREDG LIP Dot Matrix Red Yes

DMG/LIP/DMBLUNG LIP Dot Matrix Blue No

DMG/LIP/DMBLUG LIP Dot Matrix Blue Yes

DMG/MPI/SEGRED MPI 7 Segment Red No

DMG/MPI/SEGBLUE MPI 7 Segment Blue No

DMG/MPI/DMRED MPI Dot Matrix Red No

DMG/MPI/DMBLUE MPI Dot Matrix Blue No

Other models of DMG Indicators available. Please contact Sales

for details.

UNIVERSAL ENCODER DMG/DEUM.M16

LIP D43 INDICATORS

MPI D55 INDICATORS


36


Full Colour LCD Display— LITE MODEL

37


Similar to the price of a standard dot matrix indicator!! Full Colour LCD Display. Using the latest technology, our TFT Lite series can illustrate vivid images with high color contrast and resolution At only 18.5mm in depth, the compact, ultra slim design makes it easy for installation when space is limited. With the new TFT Lite series, it enhances your building’s image instantly at a reason-able price. We have shown a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client’s choice. Features: TFT Color LCD of color capability up to 262K colors Wide viewing angle Ultra Slim of only 15-20 mm depth Super bright with high contrast ratio Aesthetic display of basic lift information

User software Easy to operate Edit the screen-shot freely Screen Sizes Available: 4.3”, 5.6” & 7” Display can include: Date/Time Lift information Text Background pictures Emergency Messages Discrete signaling or optional encoder (must be advised on ordering) 12-24V DC Binary Encoder Part No: IND/GLINT14UNIV Portrait or Landscape Display

Screen Size Part No

4.3” IND/GLE430LT

5.6” IND/GLE570LT

7” IND/GLE700LT

TFT COLOUR INDICATOR - LITE Model

FROM 4 WEEKS DELIVERY


TFT COLOUR INDICATOR - VISION Model

Full Colour LCD Display. We have shown a typical layout. Background, position of lift data, time, Company details, font, colour etc is all to Client’s choice. Presentation style programming via Windows CE based operating system. Images easily edited by copying to SD Card/USB or connection via LAN. Portrait or Landscape Display (please specify when ordering) Screen Sizes Available: 8”, 10.4”, 12” (diagonally across) Display can include: Floor and Travel Directions of the Lift Time Based Information Floor Position Indication Warnings/Optional Information Date/Time Background Choice Discrete signaling or optional encoder 12-24V DC Binary Encoder Part No: IND/GLINT14UNIV-V

Screen Size Part No

8” IND/GL840 10.4” IND/GL1040 12” IND/GL1210

FROM 4 WEEKS DELIVERY

Royal Hotel Global Lift Equipment Ltd

38



Front Mounted Direction Arrows Opaque polycarbonate Available in Red, Green or White illumination. (White - STOCK ITEM, other colours 4 weeks) Can be fitted in Gilda Surface Mount Plates EN81-70 Compliant Arrow Size: 67mm x 67mm Also available with bi-tonal gong incorporated - Please contact Sales for details

HALL LANTERN ARROWS


39

4 WEEK DELIVERY

GEM48 Hall Lanterns The new GEM48 Serial Hall Lantern Arrows are now available. Fully DDA Compliant.

4 WEEK DELIVERY


IN3000 Instantaneous Safety Gear & T1 Linkage/Switch Maximum Contract speed when fitted to the Car : 0.63m/s 8mm guide P + Q = 2480 kg max. 9mm guide P + Q = 2837 kg max. Guiderail type: cold drawn (oiled or dry) Part no: SG/IN3000

IN6000 Instantaneous Safety Gear & T1 Linkage/Switch Maximum Contract speed when fitted to the Car : 0.63m/s 16mm Cold Drawn guide P + Q = 6601 kg max. 16mm Machined guide P + Q = 5295 kg max. Guiderail type: cold drawn or machined (oiled or dry) Part no: SG/IN6000

STOCK ITEMS

PQ3400UD Bidirectional Safety Gear & T3 Linkage/Switch 8-16mm guide Guiderail type: machined (dry) Maximum contract speed when fitted to the Car: 2m/s P + Q = 3304kg max Part no: SG/PQ3400UD

PR2500UD Bidirectional Safety Gear & T3 Linkage/Switch Model: V5.0 7-16mm guide Guiderail type: cold drawn or machined (oiled) Maximum contract speed when fitted to the Car : 2m/s P + Q = 1955kg max 8mm Guiderail type: cold drawn (oiled) Maximum contract speed when fitted to the Car: 1m/s P + Q = 1955kg max Part no: SG/PR2500UDV5

PQ4000UD Bidirectional Safety Gear & T3 Linkage/Switch 8-16mm guide Guiderail type: machined (oiled) Maximum contract speed when fitted to the Car: 2m/s P + Q = 4023kg max

Part no: SG/PQ4000UD

DYNATECH Bidirectional Safety Gears

can also be used on a Down Only Application.

T1 Linkage

T3 Linkage

4 WEEK DELIVERY

INSTANTANEOUS

BI-DIRECTIONAL

Safety GeaRS

40


MAINTENANCE BARRIER Set of 3 Plastic Landing Barriers Size of each barrier: 800(h) x 970(w) x 30(d) mm Complies to BS7801:1995 Part No: BARRIER/002

ELEVATOR GUARD Set of 2 Plastic Lift Barrier with telescopic poles. Size of each barrier: 1100(h) x 660(w) x 50(d) mm Complies to BS7255:2001 Suitable for up to 1300 mm openings. Part No: BARRIER/001

SAFETY MAT Controller Rubber Mat rated to 650 volts. Size: 915 x 600 x 9.5 mm thick BS 921 Compliant Part No: RUBMAT/3

SAFETY NOTICE KIT Sign kit can be used for traction & hydraulic lifts Part No: PEW/HYTRASK1

SAFETY BARRIERS

RUBBER MATS

SAFETY NOTICES

Safety IteMS

41

STOCK ITEMS


STOCK ITEMS

New Recruits Kit Hi Vis Waistcoat Hard Hat Ear Defenders 4 pairs of Foam Ear Plugs Valved Dust Respirator Safety Specs Safety Goggles 2 pairs of Furniture Hide Rigger Gloves 2 pairs of PVC gloves First Aid Kit Large Canvass Tool Bag Part No: EK/SAFE/PREM

Standard Lone Worker Kit HSE compliant contents supplied in lightweight, wash proof zip up case. Part No: EK/SAFE/FAID

PREMIER SAFETY KIT

FIRST AID KIT

FIRE EXTINGUISHER

2kg Dry Powder Fire Extinguisher Fire Suitability: Class A -Paper, Wood, Textiles, Fabrics Class B -Flammable Liquids Class C -Flammable Gases Class D -Electrical Equipment Part No: EK/FIREEX

Safety IteMS

42


SURFACE MOUNTED EN81-70 Compliant Finished in black grained artificial leather. Includes 2 off 500 mm strengthening channels. Dimensions: Width (including brackets): 450mm Depth (when closed): 95mm Depth from wall (when open) 359mm Part No: LCR/SEAT/DM

SURFACE MOUNTED EN81-70 Compliant

Zintec coated steel seat support and hinging mechanism. Seat is constructed from American Oak with bevelled edge. Load: 120kg Suitable for all lift car installations

Dimensions: Width of seat: 400mm Depth (when closed): 85mm Depth from wall (when open): 395mm

Part No: LCR/SEAT/DDAST1

STOCK ITEM

OAK WOODEN - TIP UP

FAUX LEATHER - TIP UP

EN81-70 Regulations

Seat height from floor: 500±20mm

Depth: 300-400mm Width: 400-500mm

Load: 100kg

SEATS

43

STOCK ITEMS


Programmable Voice Synthesizer for both floor messages and auxiliary messages Built in speaker & microphone to aid on site programming 2 x 16 LCD display & function keys 32 preset messages Available external library on SecureDigital card

(64mb) * Inputs can be parallel up to 8 floors or greater with

the use of Grey Code or Binary. 2 direction and 5 auxiliary message inputs.

Message recording from internal microphone, external audio source or via PC software * Output for standard 8 ohms loudspeaker Adjustable volume and night fade feature Supply: 12—24 VDC Message Input: 12-24 VDC opto isolated Floor message trigger input: 12-24 VDC opto isolated Clip fixing onto DMG 100mm Gilda plate or stud

fixing onto other faceplates Part No: SU/ESY2000 Optional Speaker if required: Part No: SU/SPKR * PC Software, Cables & SD Memory card available at extra cost. Please contact Sales for details.

STOCK ITEMS

CARUSO ESY2000

SPEECH UNITS

44


STOCK ITEM

TOOL BOARDS

Standard Tool Board manufactured from mild steel, finished in white. Size: 600mm high x 350mm wide Comes complete with: Set of self adhesive labels for door release key, hand

pump lever, control panel key, service control key and car light key

3 key rings with identifiable fobs Pre-fixed spring loaded clip to secure log cards etc Set of fixing screws/plugs Part No: EK/TB01

EK/TB01

TOOL BOXES

TOOL STORAGE

STOCK ITEM

45

Portable High Quality Steel Toolbox 3 drawers with ball bearing slides & top tray With lock and key Overall Size: Width: 520mm Depth: 218mm Height: 300mm 3 off drawers: 448 x 189 x 54mm Top tray: 518 x 216 x 63mm Part No: EK/TBD133-X


GLOBAL LIFT EQUIPMENT LTD Units H42/43 Ashmount Enterprise Park, Flint, Flintshire, CH6 5YL

Tel: 01352 735400 Fax: 01352 735733 Email: [email protected] www.global-lift.com

GLE reserves the right to modify any product details/specification contained within this publication without prior notice.

► Autodiallers ► Guiderail & Accessories

► Buffers ► Guide Shoes & Accessories

► Car Top Controls ► Indicators - TFT, Dot Matrix & 7 Segment

► Controllers ► Lift Cars & Slings

► DDA Solutions (EN81-70) ► Lifts - MRL Optima Gearless

► Divertors ► Lifts - Conventional Traction & Hydraulic

► Door Detectors & Sensors ► Lifts - Bespoke Lifts

► Doors & Spares - Anti Vandal (EN81-71) ► Lifts - Scenic Lifts

► Doors & Spares - Folding ► Load Weighing Units

► Doors & Spares - Hinged ► Machines

► Doors - Local Authority/Heavy Duty Robusta ► Pushbuttons, Plates & Fixtures

► Doors - Glass ► Safety Gears

► Doors - Modernisation Solutions ► Safety Items

► Goods Lifts ► Seats

► Governors & Tension Weights ► Speech Units

► Doors & Spares - VVVF/Sliding/Slim ► Pit Items

Documents

2011 Ref Guide