201005 EUBNRoadshow SwitchingTDM DEMO C2960S … · Microsoft PowerPoint - 201005_EUBNRoadshow_SwitchingTDM_DEMO_C2960S_Afternoon.pptx [Read-Only] Author: sbirch Created Date: 6/4/2010

© 2009 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialPresentation_ID 1

Catalyst 2960-S Switches

BorderlessAccess


24/48 10/100/1000 ports with fixed uplinks

Fixed Uplink Options: 4x1G or 2x10G SFP+10 Gigabit Ethernet in a cost optimized platform

FlexStack TechnologyBrings stackable ease-of-use features to the 2960

family, features 20G stacking links

Power over EthernetFull standards-based PoE on every portPoE+ support for next-generation high-power devices

Cisco Online Diagnostics & Onboard Fault Logging Hardware innovations that deliver preventative early

fault detection

Enhanced Limited Lifetime Hardware WarrantyNBD delivery where available90-day 8x5 TAC support

Mainstream Features in a Cost Optimized Platform

Introducing Catalyst 2960-S

LAN Lite and LAN Base Software Options

LAN Lite option provides entry-level Gig-E platform

New


Catalyst 2960-S Characteristics

10/100 Ethernet for Out Of Band (OOB) network mgmt new for C2960-S series

USB Flash - type A, external Flash storageUSB console (type B) and RJ45 console supportedDRAM: 128MBOn board Flash: 64MBLow LatencyRPS support: CAB-E type cable. (CAB-RPS2300-E=)


Catalyst 2960-S Enhancements

GOLD – OnLine Hardware Diagnostics

Crypto images (K9) – shipped from Mfg

Single SDM Template – Fixed TCAM ResourcesMore security ACL resources than Catalyst 2960IPv6 functionality built-in to TCAM ResourcesNo modification and reboot required

9198 Bytes max MTU 9000 bytes max for Catalyst 2960

OBFL – HW failure logging capability


Catalyst 2960-S FlexStack

FlexStack available with optional ModuleHot Swappable with two wire-speed 10G ports

Up to 4 switches in a stack

Unified management, control, and data plane (similar look and feel as StackWise)

3 FlexStack Cable lengths supported0.5 meters, 1.0 meter, 3.0 meter


C2960-S FlexStack Stacking

Cross-stack EtherChannel, SPAN, and FlexLink supportedEtherChannel physical links across stack members

Pre-Provisioning of stack members supportedEasy member addition and replacementConfigurable Stack Master

Following same Master election rules as StackWise Plus

Support same CISCO-STACKWISE-MIBSingle Spanning tree node: No spanning-tree across stackStack link topology change is handled in SW, not HW

Data flow recovery needs SW involvement


2960-S StackingEase of Use

3750-X StackWise PlusEase of Use and High Availability

Device Limit 4 units 9 unitsStack Bandwidth 10G / 20G 32G / 64G

Architecture HW Drop Table Ring (Destination stripping)Dynamic Ring Load

Balancing No Yes

Stack Convergence 1-2 seconds Few millisecondsStack QoS Applied hop by hop Applied on ingress

Management Single IP address, SNMP, SYSLOGSingle IP address, SNMP,

SYSLOG

Configuration Single config and CLI, auto image and config updateSingle config and CLI, auto image

and config updateShow and Debug

Commands Unified Unified

Single Forwarding and Control Plane

Synchronize ARP, MAC Address, IGMP, VLAN tables

Synchronize ARP, MAC Address, IGMP, VLAN, Routing tables

Cross-Stack Features Yes Yes

Single Bridge-ID Yes Yes

Preprovison members Yes Yes

Redundancy Stack master 1:N redundancy Stack master 1:N redundancyEasy member replacement Yes Yes


Catalyst 2960-S PoE+

802.3at (30W) PoE+ Plus compliant 802.3af (15.4 W) compliant – maintain backward compatibility

Full PoE Functionality48 Ports of full 15.4W per switch24 Port of 30W per switchNo External RPS needed

2 PoE Power Models Available740W PoE available power budget370W PoE available power budget

Capable of supporting 802.3at and 802.3af PDs simultaneously


C2960-S Sustainability GreenCisco Technology Innovation

Lowest Power Consumption in Industryimproving Gigabit Ethernet switching power efficiencyCisco ASICs: Low power consumption ASICsUses 50% power of equivalent Ethernet switches in the market

Additional Power savingsInterfaces power down when interface not in connected to reduce power

EnergyWise Capable


Cisco® Catalyst® 2960 and Catalyst 2960-S

LAN Lite vs. LAN Base Highlights

Functions LAN Lite LAN Base

Layer 2

• Entry-level access Layer 2Basic Layer 2 access features, including 802.1Q trunking, (M)STP, STP extensions, Cisco Discovery Protocol, DTP, UDLD, VTPv2, PAGP/LACP, LLDP, and storm control

• Enterprise Access Layer 2Wide range of Layer 2 access features for enterprise deployments, including FlexLinks, VTPv3, and LLDP MED

Layer 3 • No routing supportSupport for Layer 3 management interface • Static Routing Support (Future)

Manageability• Entry-level manageability

Express setup, Cisco Device Manager, SNMPv3 (with cryptography), RMON, SPAN, TDR, Auto Smart Ports, and Smart Install client

• Basic manageabilitySupport for a wider range of MIBs, IPSLA Responder, and RSPAN

Security• Entry-level access security

SSH v2 server, SSL, HTTPS, SCP, TACACS+, RADIUS, port security, 802.1x (with guest VLAN), MAB, private VLAN edge, and NAC

• Enterprise access securityDHCP snooping, IPSG, DAI, PACLs, Cisco Identity 4.0, and 802.1x features

QoS• Entry-level access QoS

Ingress and egress queuing, scheduling, Priority Queuing, and SRR

• Enterprise access QoSIngress policing, Trust Boundary, AutoQoS, and DSCP mapping, service policy

Note: LAN Base feature set includes all LAN Lite features.


C2960-S Model comparisonModel Cisco FlexStack

Stacking10G SFP+ Ports

1G SFP Ports

10/100/1000 Ports

Full PoE (15.4W) ports

PoE Budget

10G Uplink Ports

WS‐C2960S‐48FPD‐L √ 2 48 48 740W (PoE+)

WS‐C2960S‐48LPD‐L √ 2 48 24 370W (PoE+)

WS‐C2960S‐48TD‐L √ 2 48

WS‐C2960S‐24PD‐L √ 2 24 24 370W (PoE+)

WS‐C2960S‐24TD‐L √ 2 24

1G Uplink Ports

WS‐C2960S‐48FPS‐L √ 4 48 48 740W (PoE+)

WS‐C2960S‐48LPS‐L √ 4 48 24 370W (PoE+)

WS‐C2960S‐48TS‐L √ 4 48

WS‐C2960S‐24PS‐L √ 4 24 24 370W (PoE+)

WS‐C2960S‐24TS‐L √ 4 24LAN Lite 1G Uplink Ports

WS‐2960S‐48TS‐S 2 48

WS‐2960S‐24TS‐S 2 24


Catalyst 2960-S Key DifferentiationsCatalyst 2960-S – Gigabit Ethernet Switch

LAN Base & LAN Lite models available

Stacking with FlexStack technology10 Gigabit UpLinks with SFP+ form factor802.3at POE+; Full POE power with 740W or 370W budgetsLow power consumption – Lowest in industry (Fixed Gig Switches)Very Low Latency Line rate all interfacesEnhanced LLW

Documents

201005 EUBNRoadshow SwitchingTDM DEMO C2960S … · Microsoft PowerPoint - 201005_EUBNRoadshow_SwitchingTDM_DEMO_C2960S_Afternoon.pptx [Read-Only] Author: sbirch Created Date: 6/4/2010