2010 Mazda 3 Omeng

Black plate (1,1)

Mazda3_8AD6-EC-09A_Edition1 Page1Tuesday, December 2 2008 2:26 PM

Form No.8AD6-EC-09A

Black plate (3,1)

Thank you for choosing a Mazda. We at Mazda design and build vehicles with completecustomer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this manualcarefully and follow its recommendations.

An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service isnecessary, that's the place to go.

Our nationwide network of Mazda professionals is dedicated to providing you with the bestpossible service.

We assure you that all of us at Mazda have an ongoing interest in your motoring pleasureand in your full satisfaction with your Mazda product.

Mazda Motor CorporationHIROSHIMA, JAPAN

Important Notes About This ManualKeep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should youresell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal atMazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Event Data RecorderThis vehicle is equipped with an event data recorder. In the event of a crash, this device records data related tovehicle dynamics and safety systems for a short period of time. These data can help provide a betterunderstanding of the circumstances in which crashes and injuries occur and lead to the designing of safervehicles.

Air Conditioning and the EnvironmentYour Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not todamage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized MazdaDealer.

PerchlorateCertain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ...] maycontain Perchlorate Material Special handling may apply for service or vehicle end of life disposal. Seewww.dtsc.ca.gov/hazardouswaste/perchlorate.

Please be aware that this manual applies to all models, equipment and options. As a result, you may findsome explanations for equipment not installed on your vehicle.

2009 Mazda Motor CorporationPrinted in Japan Jan. 2009(Print1)

AWord to Mazda Owners


Form No.8AD6-EC-09A

Black plate (4,1)

We want to help you get the most drivingpleasure from your vehicle. Your owner'smanual, when read from cover to cover,can do that in many ways.

Illustrations complement the words of themanual to best explain how to enjoy yourMazda. By reading your manual, you canfind out about the features, importantsafety information, and driving undervarious road conditions.

The symbol below in this manual meansDo not do this or Do not let thishappen.

Index: A good place to start is the Index,an alphabetical listing of all informationin your manual.

You'll find several WARNINGs,CAUTIONs, and NOTEs in the manual.

WARNINGA WARNING indicates a situation inwhich serious injury or death couldresult if the warning is ignored.

CAUTIONA CAUTION indicates a situation inwhich bodily injury or damage toyour vehicle, or both, could result ifthe caution is ignored.

NOTEA NOTE provides information and sometimessuggests how to make better use of yourvehicle.

The symbol below, located on some partsof the vehicle, indicates that this manualcontains information related to the part.Please refer to the manual for a detailedexplanation.

How to Use This Manual


Form No.8AD6-EC-09A

Black plate (5,1)


Form No.8AD6-EC-09A

Table of Contents

Your Vehicle at a GlanceInterior, exterior views and part identification of your Mazda.

1

Essential Safety EquipmentUse of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

2

Knowing Your MazdaExplanation of basic operations and controls; opening/closing and adjustmentof various parts.

3

Before Driving Your MazdaImportant information about driving your Mazda.

4

Driving Your MazdaExplanation of instruments and controls.

5

Interior ComfortUse of various features for drive comfort, including air-conditioning and audiosystem.

6

In Case of an EmergencyHelpful information on what to do in an emergency.

7

Maintenance and CareHow to keep your Mazda in top condition.

8

Customer InformationImportant consumer information including warranties and add-on equipment.

9

SpecificationsTechnical information about your Mazda.

10

Index 11

Black plate (7,1)

1 Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Interior Overview .......................................................................... 1-2Interior Equipment (View A) .................................................... 1-2Interior Equipment (View B) .................................................... 1-3Interior Equipment (View C) .................................................... 1-4

Exterior Overview ......................................................................... 1-5Front (4 Door) ........................................................................... 1-5Rear (4 Door) ............................................................................ 1-6Front (5 Door) ........................................................................... 1-7Rear (5 Door) ............................................................................ 1-8

1-1


Form No.8AD6-EC-09A

Black plate (8,1)

Interior Equipment (View A)

Door-lock knob .................................................................................................. page 3-35Power door lock switch ..................................................................................... page 3-35DSC OFF switch ............................................................................................... page 5-26Turn and lane-change signals ............................................................................ page 5-60Lighting control ................................................................................................. page 5-56Dashboard illumination knob ............................................................................ page 5-37Instrument cluster .............................................................................................. page 5-34Wiper and washer lever ..................................................................................... page 5-62Lock release lever .............................................................................................. page 3-65Outside mirror switch ........................................................................................ page 3-65Power window switches .................................................................................... page 3-45Power window lock switch ................................................................................ page 3-47

1-2

Your Vehicle at a Glance

The equipment and installation position varies by vehicle

Interior Overview


Form No.8AD6-EC-09A

Black plate (9,1)

Interior Equipment (View B)

Audio control switches ...................................................................................... page 6-56SRS air bags ...................................................................................................... page 2-44Multi information display .................................................................................. page 6-97Navigation system (if equipped) .......................................... Refer to the separate manualAudio system ..................................................................................................... page 6-17Information display ............................................................................................ page 6-95Hazard warning flasher switch .......................................................................... page 5-68Climate control system ........................................................................................ page 6-2Parking brake ....................................................................................................... page 5-6Accessory socket ............................................................................................. page 6-112MT shift lever .................................................................................................... page 5-10AT shift lever ...................................................................................................... page 5-12Push button start ................................................................................................ page 3-11Cruise control switches ...................................................................................... page 5-19Hood release handle .......................................................................................... page 3-50


Interior Overview

1-3The equipment and installation position varies by vehicle


Form No.8AD6-EC-09A

Black plate (10,1)

Interior Equipment (View C)

Seat belts ............................................................................................................ page 2-16SRS air bag ........................................................................................................ page 2-44Remote fuel-filler lid release ............................................................................. page 3-49Trunk release lever ............................................................................................. page 3-42Bottle holder .................................................................................................... page 6-108Vanity mirror ...................................................................................................... page 6-93Overhead lights .................................................................................................. page 6-94Rearview mirror ................................................................................................. page 3-66Sunvisor ............................................................................................................. page 6-93Seat warmer switches ........................................................................................ page 2-14Cup holders ...................................................................................................... page 6-107Front seats ............................................................................................................ page 2-2Center console ................................................................................................. page 6-109Rear seat .............................................................................................................. page 2-9

1-4



Interior Overview


Form No.8AD6-EC-09A

Black plate (11,1)

Front (4 Door)

Hood .................................................................................................................. page 3-50Windshield wiper blades .................................................................................... page 8-26Moonroof ........................................................................................................... page 3-51Child safety locks .............................................................................................. page 3-38Tires ................................................................................................................... page 8-33Door lock ........................................................................................................... page 3-34Light bulbs ......................................................................................................... page 8-37


Exterior Overview



Form No.8AD6-EC-09A

Black plate (12,1)

Rear (4 Door)

Trunk lid ............................................................................................................ page 3-42Rear window antenna ........................................................................................ page 6-16Outside mirror .................................................................................................... page 3-65Tires ................................................................................................................... page 8-33Fuel-filler lid ...................................................................................................... page 3-48Light bulbs ......................................................................................................... page 8-37

1-6



Exterior Overview


Form No.8AD6-EC-09A

Black plate (13,1)

Front (5 Door)

Hood .................................................................................................................. page 3-50Windshield wiper blades .................................................................................... page 8-26Moonroof ........................................................................................................... page 3-51Door lock ........................................................................................................... page 3-34Tires ................................................................................................................... page 8-33Light bulbs ......................................................................................................... page 8-37


Exterior Overview



Form No.8AD6-EC-09A

Black plate (14,1)

Rear (5 Door)

Rear wiper blade ................................................................................................ page 8-28Liftgate .............................................................................................................. page 3-39Antenna ............................................................................................................. page 6-16Fuel-filler lid ...................................................................................................... page 3-48Child safety lock ................................................................................................ page 3-38Outside mirror .................................................................................................... page 3-65Tires ................................................................................................................... page 8-33Light bulbs ......................................................................................................... page 8-37

1-8



Exterior Overview


Form No.8AD6-EC-09A

Black plate (15,1)

2 Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

Seats ............................................................................................... 2-2Front Seats (Manually Operated Seats) ..................................... 2-2Front Seats (Electrically Operated Seats) .................................. 2-4Rear Seat ................................................................................... 2-9Head Restraints ....................................................................... 2-12Seat Warmer ......................................................................... 2-14

Seat Belt Systems ........................................................................ 2-16Seat Belt Precautions .............................................................. 2-16Seat Belt .................................................................................. 2-20Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-22Seat Belt Extender ................................................................... 2-24Seat Belt Warning Light/Beep ................................................ 2-26

Child Restraint ............................................................................ 2-28Child Restraint Precautions ..................................................... 2-28Installing Child-Restraint Systems .......................................... 2-32LATCH Child-Restraint Systems ............................................ 2-39

SRS Air Bags ............................................................................... 2-44Supplemental Restraint System (SRS) Precautions ................ 2-44Supplemental Restraint System Components ......................... 2-48How the SRS Air Bags Work .................................................. 2-49SRS Air Bag Deployment Criteria .......................................... 2-53Limitations to SRS Air Bag .................................................... 2-54Driver and Front Passenger Occupant ClassificationSystem ..................................................................................... 2-56Monitoring and Maintenance .................................................. 2-61

2-1Some models.


Form No.8AD6-EC-09A

Black plate (16,1)

Front Seats (ManuallyOperated Seats)

WARNINGDo not modify or replace the frontseats:

Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.

Do not drive with damaged front seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bagcomponents. If there was asubsequent collision, an air bag maynot deploy which could lead toinjuries. Always have an AuthorizedMazda Dealer inspect the front seats,front seat belt pretensioners and airbags after a collision.

Make sure the adjustable componentsof a seat are locked in place:

Adjustable seats and seatbacks thatare not securely locked aredangerous. In a sudden stop orcollision, the seat or seatback couldmove, causing injury. Make sure theadjustable components of the seatare locked in place by attempting toslide the seat forward and backwardand rocking the seatback.

qSeat Slide

WARNINGAdjust the driver's seat only when thevehicle is stopped:

Adjusting the driver's seat while thevehicle is moving is dangerous. Thedriver could lose control of the vehicleand have an accident.

To move a seat forward or backward, raisethe lever and slide the seat to the desiredposition and release the lever.

Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward.

2-2

Essential Safety Equipment

Seats


Form No.8AD6-EC-09A

Black plate (17,1)

qSeat Recline

WARNINGDo not drive with either front seatreclined:

Sitting in a reclined position while thevehicle is moving is dangerousbecause you do not get the fullprotection from seat belts. Duringsudden braking or a collision, youcan slide under the lap belt andsuffer serious internal injuries. Formaximum protection, sit well backand upright.

Always sit in the passenger seatproperly with the seatback upright andfeet on the floor:

Your front passenger seat has weightsensors, sitting in the front passengerseat improperly out of position orwith the seatback reclined too farwhile the vehicle is moving isdangerous as it can take off weightfrom the seat bottom and affect theweight determination of the frontpassenger sensing system. As a resultthe front passenger will not have thesupplementary protection of the airbag and seat belt pretensioner, whichcould result in serious injury. Alwayssit upright against the seatback withyour feet on the floor.

Do not drive with the seatbackunlocked:

All of the seatbacks play animportant role in your protection in avehicle. Leaving the seatbackunlocked is dangerous as it can allowpassengers to be ejected or thrownaround and baggage to strikeoccupants in a sudden stop orcollision, resulting in severe injury.After adjusting the seatback at anytime, even when there are no otherpassengers, rock the seatback tomake sure it is locked in place.

To change the seatback angle, leanforward slightly while raising the lever.Then lean back to the desired position andrelease the lever.

Make sure the lever returns to its originalposition and the seatback is locked inplace by attempting to push it forward andbackward.


Seats

2-3


Form No.8AD6-EC-09A

Black plate (18,1)

CAUTIONWhen returning a rear-reclinedseatback to its upright position,make sure you hold onto theseatback with your other hand whileoperating the lever. If the seatback isnot supported, it will flip forwardsuddenly and could cause injury.

qHeight Adjustment (Driver's Seat)

By moving the seat lever up or down, thedriver's seat height can be adjusted.

Down

Up

Front Seats (ElectricallyOperated Seats)

The power operated seat is available onlyon the driver's seat. The front passengerseat is manually operated.Refer to Front Seats (Manually OperatedSeats) (page 2-2) for adjustmentinstructions.

WARNINGDo not modify or replace the frontseats:

Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.

Do not drive with damaged front seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bagcomponents. If there was asubsequent collision, an air bag maynot deploy which could lead toinjuries. Always have an AuthorizedMazda Dealer inspect the front seats,front seat belt pretensioners and airbags after a collision.

2-4


Seats


Form No.8AD6-EC-09A

Black plate (19,1)

CAUTION The seat-bottom power

adjustment is operated by motors.Avoid extended operation becauseexcessive use can damage themotors.

To prevent the battery fromrunning down, avoid using thepower adjustment when theengine is stopped. The adjusteruses a large amount of electricalpower.

Do not use the switch to makemore than one adjustment at atime.

qSeat Slide

To slide the seat, move the slide lifterswitch on the outside of the seat to thefront or back and hold it. Release theswitch at the desired position.

qSeat Recline

WARNINGDo not drive with either front seatreclined:

Sitting in a reclined position while thevehicle is moving is dangerousbecause you do not get the fullprotection from seat belts. Duringsudden braking or a collision, youcan slide under the lap belt andsuffer serious internal injuries. Formaximum protection, sit well backand upright.

Change the seatback angle by pressing thefront or rear side of the reclining switch.Release the switch at the desired position.


Seats

2-5


Form No.8AD6-EC-09A

Black plate (20,1)

qHeight Adjustment

The seat height can be adjusted bymoving the switch up or down.

qSeat Position Memory

One-touch seat position programming andactivation is available on the driver's seat.

CAUTIONWhen activating the seat position, donot place your hands or fingersaround the seat bottom. The seatmoves to the desired positionautomatically, and if your hands orfingers are placed around the seatbottom, it could cause injury.

Set button

Programming of the driver's seat positionsis possible using the following functions:l Programming buttons 1, 2, or 3 and theset button.

l Operation using the advanced key/retractable type key

Programmed seat positions can beactivated using the following functions:l Programming buttons 1, 2, or 3.l Operation using advanced keylessfunctions/keyless entry system

NOTE(With advanced key/retractable type key)Individual seat positions can be programmedto the three available programming buttons onthe side of the driver's seat, plus one seatposition for each advanced key/retractabletype key used with the vehicle.

2-6


Some models.

Seats


Form No.8AD6-EC-09A

Black plate (21,1)

Operation using the seat-side buttons

Programming

Park the vehicle in a safe location beforeperforming the seat positionprogramming. (Vehicle must be stopped)

1. Adjust the seat to the desired position.For each seat position adjustmentmethod refer to the following pages:Seat Slide (page 2-5)Seat Recline (page 2-5)Height Adjustment (page 2-6)

2. Press the desired programming button1, 2, or 3 while pressing the set buttonuntil a beep sound is heard.The button is programmed after a beepsound is heard. Other buttons can beprogrammed using the same procedure.

NOTEVehicle maintenance or other reasonsrequiring the vehicle battery to bedisconnected will result in the seat positionmemory being erased.In this case, re-program the seat positions.

Setting the driver's seat to a pre-programmed position

There are two methods for setting thedriver's seat to a pre-programmedposition. For example, the type A methodcan be used before sitting in the seat andwhile the driver's door is open, and thetype B method can be used after getting inthe vehicle with the driver's door closed.

TYPE AWhen the ignition switched off and thedriver's door is open, press theprogramming button 1, 2, or 3 for thedesired seating position.

NOTEIn the following cases, the seat position setfunction cancels:l Any of the seat adjustment switches are

operated.l The set button is pressed.l A programming button 1, 2, or 3 is pressed.l The vehicle starts moving.l Vehicle locking/unlocking is done using the

transmitter.l Vehicle locking/unlocking is done by

pressing the request switch on a front doorwhile the advanced key is being carried.

TYPE BWhen the ignition is switched ON or thedriver's door is closed, press and hold thedesired programming button 1, 2, or 3.

NOTEIn the following cases, the seat position setfunction cancels:l Any of the seat adjustment switches are

operated.l The set button is pressed.l The vehicle starts moving.

Operation using the advanced key/retractable type key

With advanced key

Lock button

Unlock button


Seats

2-7Some models.


Form No.8AD6-EC-09A

Black plate (22,1)

With retractable type key

Lock buttonUnlock button

Operation indicator light

Programming

One seat position can be programmed intoeach advanced key/retractable type key.After the following conditions have beenmet, operate the seat and the advancedkey/retractable type key to program theseat positions.l The ignition switched off(The auxiliary key/retractable type keyis removed from the ignition switch)

l The driver's door is open

1. Adjust the seat to the desired position.For each seat position adjustmentmethod, refer to the following pages:Seat Slide (page 2-5)Seat Recline (page 2-5)Height Adjustment (page 2-6)

2. Press and hold the unlock button on theadvanced key/retractable type keywhile pressing the set button until abeep sound is heard.The advanced key/retractable type keyis programmed after a beep sound isheard.

Seat position memory setting procedure

To set the driver's seat to pre-programmedposition, switch the ignition off, unlockthe doors using any of the followingmethods, and then open the driver's doorwithin about 40 seconds.l Press the unlock switch on theadvanced key/retractable type key.

l Press the request switch on a front doorwhile the advanced key is beingcarried.

NOTEIf any of the following occurs, the seat positionactivation function cancels:l The lock/unlock button is pressed while the

key is not inserted into the ignition switchor the key slot.

l A seat adjustment switch is operated.l The vehicle starts moving.l The selected programming button 1, 2, or 3.l The request switch on a front door is

pressed while the advanced key is beingcarried.

l The set button is pressed.

Erasing memory

After the following conditions have beenmet, press the lock button on theadvanced key/retractable type key whilepressing the set button until a beep soundis heard.l The ignition switch is in the LOCKposition(The auxiliary key/retractable type keyis removed from the ignition switch)

l The driver's door is open

2-8


Seats


Form No.8AD6-EC-09A

Black plate (23,1)

NOTEMemory will also be erased if any of thefollowing operations are performed:l The advanced key/retractable type key code

has been changed.Refer to Immobilizer System (withAdvanced Key) on page 3-54.Refer to Immobilizer System (withoutAdvanced Key) on page 3-58.

l The vehicle battery is disconnected forvehicle maintenance or other reasons.

Rear Seat

WARNINGDo not stack cargo higher than theseatbacks or place articles on the rearpackage tray or on the luggagecompartment cover:

Stacking luggage or other cargohigher than the seatbacks, andplacing articles on the rear seat or onthe luggage compartment cover isdangerous. During sudden brakingor a collision, objects can fly aroundand become projectiles that may hitand injure passengers.

Make sure luggage and cargo issecured before driving:

Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.

Do not drive with the seatbackunlocked:

All of the seatbacks play animportant role in your protection in avehicle. Leaving the seatbackunlocked is dangerous as it can allowpassengers to be ejected or thrownaround and baggage to strikeoccupants in a sudden stop orcollision, resulting in severe injury.After returning the seatback at anytime, even when there are no otherpassengers, rock the seatback tomake sure it is locked in place.


Seats

2-9


Form No.8AD6-EC-09A

Black plate (24,1)

Never allow a passenger to sit or standon the folded seatback while thevehicle is moving:

Driving with a passenger on thefolded seatback is dangerous.Allowing a child to sit up on thefolded seatback while the vehicle ismoving is particularly dangerous. Ina sudden stop or even a minorcollision, a child not in a proper seator child-restraint system and seatbelt could be thrown forward, backor even out of the vehicle resulting inserious injuries or death. The child inthe baggage area could be throwninto other occupants and causeserious injury.

Never give the car keys to children anddo not allow them to play in the vehicle(4 Door):

Playing with the folding rear seats isdangerous. The folding rearseatbacks cannot be folded downfrom inside the trunk. Once theseatbacks are back up, a child in thetrunk would not be able to get outthe way they had entered. If you havesmall children, keep the seatbackslocked.

Always leave your car locked and keepthe car keys safely away from children:

Leaving your car unlocked or thekeys in reach of children isdangerous. Children who find theirway into the trunk through anunlocked rear seatback or an opentrunk can become accidentally lockedin the trunk. This could result indeath or brain damage from heatprostration, particularly in thesummer. Always lock the doors andthe trunk, and as an added measure,keep the rear seatbacks locked,whether you have children in yourhome or not.

Do not leave the key in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:

Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. Children may find these newkinds of keys to be an interesting toyto play with and could cause thepower windows or other controls tooperate, or even make the vehiclemove.

NOTEWhen returning a rear seat to its originalposition, also replace the seat belt to itsnormal position. Verify that the seat belt pullsout and retracts.

2-10


Seats


Form No.8AD6-EC-09A

Black plate (25,1)

qSplit-Folding Rear Seatback

To fold the seatbacks

CAUTIONWhen operating the rear seatbackknob, make sure you support theseatback with your hand. If theseatback is not supported with yourhand, it will flip forward suddenlyand could cause injury to the fingerthat pushes the rear seatback knobdown.

1. Position the outboard seat belts to theside when folding the seatbacks down.

2. Support the seatback with your hand.

3. Push the rear seatback knob down.

To return the seatbacks to the uprightposition

1. Position the outboard seat belts to theside.

2. Lift the seatbacks upright.

3. Make sure the seat belts are fullypulled out from under the seatbacks.

4. Pull on the top of the seatbacks frominside the vehicle to make sure they arelocked.

WARNINGAlways make sure the seat belts arefully pulled out from under theseatbacks:

A seat belt caught under a seatbackafter the seatback is returned to itsupright position is dangerous. In acollision or sudden stop, the seat beltcannot provide adequate protection.

When returning the seatback to theupright position, make sure there is nored indication:

A rear seatback not fully returnedand locked in the upright position isdangerous. Sudden stops ormaneuvering could cause a seatbackto flip forward suddenly resulting ininjury. If the red indicator is visible onthe back of the rear seatback knob,the seatback is not locked in theupright position.

Locked position

Unlocked position

Red indicator


Seats

2-11


Form No.8AD6-EC-09A

Black plate (26,1)

qArmrest

The rear armrest in the center of the rearseatback can be used (no occupant in thecenter seat) or placed upright.

Head RestraintsHead restraints are intended to helpprotect you and the passengers from neckinjury.

WARNINGAlways drive with the head restraintsinstalled when seats are being usedand make sure they are properlyadjusted:

Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision.

Height adjustment

To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck to preventinjury.Front seat

2-12


Seats


Form No.8AD6-EC-09A

Black plate (27,1)

Rear seat

Removal/Installation

To remove the head restraint, pull it upwhile pressing the stop-catch.To install the head restraint, press theuprights into the holes while pressing thestop-catch.

WARNINGAlways drive with the head restraintsset up when seats are being used andmake sure they are properly set up:

Driving with the head restraints notset up is dangerous. With no supportbehind your head, your neck could beseriously injured in a collision.

qActive Head Restraints

The active head restraints are equipped onthe front seats.In a rear-end collision, the active headrestraints use the force applied by theoccupant on the seatback toinstantaneously move the head restraintsin the forward direction, reducingexcessive rearward tilting of the head andreducing the load on the neck. The activehead restraints are also highly effective atreducing whip-lash injuries whichcommonly occur in rear-end collisions atlow to mid-range vehicle speeds.

WARNING Always adjust the head restraints

properly as specified in thissection. Failure to do so canreduce the effectiveness of theactive head restraint.

Do not attach any accessories suchas a TV screen to a front seatbackand/or a front head restraint. Alsodo not place heavy items or thickitems, or both in the seatbackpocket. Doing so could reduce theeffectiveness of the active headrestraint in a rear-end collision.


Seats

2-13


Form No.8AD6-EC-09A

Black plate (28,1)

NOTEl The active head restraints operate in a

rear-end collision. The head restraintsreturn to their original position after thecollision.

l The method for adjusting the active headrestraints is the same as a normal headrestraint.

Seat Warmer

The driver and front passenger seats canbe warmed by rotating the applicable seatwarmer dial while the ignition is switchedON.The seat temperature increases as thenumber on the dial increases. When theseat warmers are not in use, rotate the seatwarmer dials to 0.

2-14


Some models.

Seats


Form No.8AD6-EC-09A

Black plate (29,1)

WARNING Be careful when using the seat

warmer. The heat from the seatwarmer may be too hot for somepeople, as indicated below, andcould cause a low-temperatureburn. Infants, small babies, elderly

people, and physicallychallenged people

People with delicate skin People who are excessively

fatigued People who are drunk People who have taken sleep-

inducing medicine such assleeping pills or cold medicine

Do not use the seat warmer withanything having high moisture-retention ability such as a blanketor cushion on the seat. The seatmay be heated excessively andcause a low-temperature burn.

Do not use the seat warmer evenwhen taking a short nap in thevehicle. The seat may be heatedexcessively and cause a low-temperature burn.

Do not place heavy objects withsharp projections on the seat, orinsert needles or pins into it. Thiscould cause the seat to becomeexcessively heated and result ininjury from a minor burn.

CAUTIONDo not use organic solvents to cleanthe seat. It may damage the seatsurface and the heater.

NOTEUse the seat warmer when the engine isrunning, and do not continue to use it for along period of time.


Seats

2-15


Form No.8AD6-EC-09A

Black plate (30,1)

Seat Belt PrecautionsSeat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the waywhen not in use.

The driver's seat belt has no provisions for child-restraint systems and has only anemergency locking mode. The driver may wear it comfortably, and it will lock during acollision.

However, the front passenger's seat and all rear lap/shoulder belt retractors operate in twomodes: emergency locking mode, and for child-restraint systems, automatic locking mode.While we recommend you put all children in the rear seats, if you must use the frontpassenger seat for a child, slide the front passenger seat as far back as possible and makesure any child-restraint system is secured properly.

2-16


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (31,1)

WARNINGAlways wear your seat belt and make sure all occupants are properly restrained:

Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrownout of the vehicle. They could be seriously injured or even killed. In the samecollision, occupants wearing seat belts would be much safer.

Do not wear twisted seat belts:Twisted seat belts are dangerous. In a collision, the full width of the belt is notavailable to absorb the impact. This puts more force on the bones beneath the belt,which could cause serious injury or death.

Never use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat beltused in this way cannot spread the impact forces properly and the two passengerscould be crushed together and seriously injured or even killed. Never use one belt formore than one person at a time and always operate the vehicle with each occupantproperly restrained.

Do not operate a vehicle with a damaged seat belt:Using a damaged seat belt is dangerous. An accident could damage the beltwebbing of the seat belt in use. A damaged seat belt cannot provide adequateprotection in a collision. Have an Authorized Mazda Dealer inspect all seat beltsystems in use during an accident before they are used again.

Have your seat belts changed immediately if the pretensioner or load limiter hasbeen expended:

One or both front air bags may deploy, and the corresponding pretensioner(s) mayalso deploy at the same time. Like the air bags, the front seat belt pretensioners willonly function once. While it is safer to use a post-crash (a seat belt that was used inan accident) than no front seat belt at all, using a front seat belt with an expendedpretensioner or load limiter loaded reduces the safety available to you. If the frontseat belt pretensioners are not replaced, the risk of injury in a collision will increase.Expended front seat belt pretensioners and air bags must be replaced after anycollision which caused them to deploy. Additionally, the load limiter will only limitloads on the chest once in a collision and this is another reason to have the frontseat belts inspected. Always have an Authorized Mazda Dealer inspect the front seatbelt pretensioners and air bags after any collision.


Seat Belt Systems

2-17


Form No.8AD6-EC-09A

Black plate (32,1)

CAUTIONBelt retraction may become difficult if the belts and rings are soiled, so try to keepthem clean. For more details about cleaning the seat belts, refer to Cleaning theLap/Shoulder Belt Webbing (page 8-60).

qPregnant Women and Persons with Serious Medical Conditions

Pregnant women should always wear seat belts. Ask your doctor for specificrecommendations.The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.The shoulder belt should be worn across your shoulder properly, but never across thestomach area.Persons with serious medical conditions also should wear seat belts. Check with yourdoctor for any special instructions regarding specific medical conditions.

qEmergency Locking Mode

In the emergency locking mode, the belt remains comfortable on the occupant and theretractor will lock in position during a collision. When the seat belt is fastened, it willalways be in the emergency locking mode until it is switched to automatic locking mode bypulling it all the way out to its full length. If the belt feels tight and hinders comfortablemovement while the vehicle is stopped or in motion, it may be in the automatic lockingmode because the belt has been pulled too far out. To return the belt to the morecomfortable emergency locking mode, wait until the vehicle has stopped in a safe, levelarea, retract the belt fully to convert it back to emergency locking mode and then extend itaround you again.If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling itout slowly. If this fails, pull the belt strongly one time and loosen, then pull it out againslowly.

2-18


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (33,1)

qAutomatic Locking Mode

Always use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an accident. To enable seat belt automatic locking mode,pull it all the way out and connect it as instructed on the child-restraint system. It willretract down to the child-restraint system and stay locked on it. See the section on childrestraint (page 2-28).


Seat Belt Systems

2-19


Form No.8AD6-EC-09A

Black plate (34,1)

Seat Belt

qFastening the Seat Belt

1. Grasp the seat belt tongue.

2. Slowly pull out the lap/shoulder belt.

Seat belt tongue

Lap/shoulder belt

3. Insert the seat belt tongue into the seatbelt buckle until you hear a clicksound.

Seat belt buckle

Seat belt tongue

WARNINGPositioning the Shoulder Portion of theSeat Belt:

Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

4. Position the lap belt as low as possible,not on the abdominal area, then adjustthe shoulder belt so that it fits snuglyagainst your body.

Keep low on hip bone

Too high

Take up slack

WARNINGPositioning the Lap Portion of the SeatBelt:

The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.

2-20


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (35,1)

qUnfastening the Seat Belt

Depress the button on the seat belt buckle.If the belt does not fully retract, pull it outand check for kinks or twists. Then makesure it remains untwisted as it retracts.

Button

NOTEIf a belt does not fully retract, inspect it forkinks and twists. If it is still not retractingproperly, have it inspected at an AuthorizedMazda Dealer.

qFront Shoulder Belt Adjuster

Adjust the height of the shoulder belt ifthe seat belt touches your neck, or if itcrosses your arm instead of your shoulder.To raise the shoulder belt adjuster, pushthe adjuster up. To lower the shoulder beltadjuster, pull the adjuster and slide itdown. Make sure the adjuster is locked.

To raise To lower

WARNINGPositioning the Shoulder Portion of theSeat Belt:

Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.


Seat Belt Systems

2-21


Form No.8AD6-EC-09A

Black plate (36,1)

Front Seat Belt Pretensionerand Load Limiting Systems

For optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner and load limitingsystems. For both these systems to workproperly you must wear the seat beltproperly.

Pretensioners:In moderate or severe frontal or near-frontal accidents, the front air bag andpretensioner systems deploysimultaneously. The front seat beltretractors remove slack quickly as the airbags are expanding.In addition, the pretensioner system forthe front passenger, like the frontpassenger air bag, is designed to onlydeploy in accordance with the total seatedweight on the front passenger seat. Anytime the air bags and front seat beltpretensioners have fired they must bereplaced. For details, refer to the frontpassenger seat weight sensors (page 2-56).

Load limiter:The load limiting system releases beltwebbing in a controlled manner to reducebelt force on the occupant's chest. Whilethe most severe load on a seat belt occursin frontal collisions, the load limiter hasan automatic mechanical function and canactivate in any accident mode withsufficient occupant movement.Even if the pretensioners have not fired,the load limiting function must bechecked by an Authorized Mazda Dealerafter any collision.

WARNINGWear seat belts only as recommendedin this owner's manual:

Incorrect positioning of the driver andfront passenger seat belts isdangerous. Without properpositioning, the pretensioner andload limiting systems cannot provideadequate protection in an accidentand this could result in serious injury.For more details about wearing seatbelts, refer to Fastening the seatbelts (page 2-20).

Have your seat belts changedimmediately if the pretensioner or loadlimiter has been expended:

One or both front air bags maydeploy, and the correspondingpretensioner(s) may also deploy atthe same time. Like the air bags, thefront seat belt pretensioners will onlyfunction once. While it is safer to usea post-crash (a seat belt that wasused in an accident) than no frontseat belt at all, using a front seat beltwith an expended pretensioner orload limiter loaded reduces the safetyavailable to you. If the front seat beltpretensioners are not replaced, therisk of injury in a collision willincrease. Expended front seat beltpretensioners and air bags must bereplaced after any collision whichcaused them to deploy. Additionally,the load limiter will only limit loadson the chest once in a collision andthis is another reason to have thefront seat belts inspected. Alwayshave an Authorized Mazda Dealerinspect the front seat beltpretensioners and air bags after anycollision.

2-22


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (37,1)

Do not modify the components orwiring, or use electronic testing deviceson the pretensioner system:

Modifying the components or wiringof the pretensioner system, includingthe use of electronic testing devices isdangerous. You could accidentallyactivate it or make it inoperablewhich would prevent it fromactivating in an accident. Theoccupants or repairers could beseriously injured.

Properly dispose of the pretensionersystem:

Improper disposal of the pretensionersystem or a vehicle with non-deactivated pretensioners isdangerous. Unless all safetyprocedures are followed, injury couldresult. Ask an Authorized MazdaDealer how to safely dispose of thepretensioner system or how to scrapa pretensioner-equipped vehicle.

NOTEl The pretensioner system will activate in a

moderate or greater frontal or near-frontalcollision. The pretensioner system for thefront passenger is designed to only deployin accordance with the total seated weighton the front passenger seat. It will notactivate in most rollovers, side or rearimpacts.

l Some smoke (non-toxic gas) will bereleased when the air bags andpretensioners deploy. This does not indicatea fire. This gas normally has no effect onoccupants, however, those with sensitiveskin may experience light skin irritation. Ifresidue from the deployment of the air bagsor the front pretensioner system gets on theskin or in the eyes, wash it off as soon aspossible.

qAir Bag/Front Seat BeltPretensioner System Warning Light

If the air bag/front seat belt pretensionersystem is working properly, the warninglight illuminates when the ignition isswitched ON or after the engine iscranked. The warning light turns off aftera specified period of time.

A system malfunction is indicated if thewarning light constantly flashes,constantly illuminates or does notilluminate at all when the ignition isswitched ON. If any of these occur,consult an Authorized Mazda Dealer assoon as possible. The system may notwork in an accident.

WARNINGNever tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs:

Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious injury or death.


Seat Belt Systems

2-23


Form No.8AD6-EC-09A

Black plate (38,1)

qAir Bag/Front Seat BeltPretensioner System Warning Beep

If a malfunction is detected in the air bag/front seat belt pretensioner systems andthe warning light, a warning beep soundwill be heard for about 5 seconds everyminute.

The air bag and seat belt pretensionersystem warning beep sound will continueto be heard for approximately 35 minutes.Have your vehicle inspected at anAuthorized Mazda Dealer as soon aspossible.

WARNINGDo not drive the vehicle with the airbag/front seat belt pretensioner systemwarning beep sounding:

Driving the vehicle with the air bag/front seat belt pretensioner systemwarning beep sounding is dangerous.In a collision, the air bags and thefront seat belt pretensioner systemwill not deploy and this could resultin death or serious injury.Contact an Authorized Mazda Dealerto have the vehicle inspected as soonas possible.

Seat Belt ExtenderIf your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and forthe particular vehicle and seat. Even if itplugs into other seat belts, it may not holdin the critical moment of a crash.When ordering an extender, only orderone that provides the necessary additionallength to fasten the seat belt properly.Please contact your Authorized MazdaDealer for more information.

2-24


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (39,1)

WARNINGDo not use a seat belt extender unlessit is necessary:

Using a seat belt extender when notnecessary is dangerous. The seat beltwill be too long and not fit properly.In an accident, the seat belt will notprovide adequate protection and youcould be seriously injured. Only usethe extender when it is required tofasten the seat belt properly.

Do not use an improper extender:Using a seat belt extender that is foranother person or a different vehicleor seat is dangerous. The seat beltwill not provide adequate protectionand the user could be seriouslyinjured in an accident. Only use theextender provided for you and for theparticular vehicle and seat. NEVERuse the extender in a different vehicleor seat. If you sell your Mazda, donot leave your seat belt extender inthe vehicle. It could be usedaccidentally by the new owner of thevehicle. After removing the seat beltextender, discard it. Never use theseat belt extender in any othervehicle you may own in the future.

Do not use an extender that is toolong:

Using an extender that is too long isdangerous. The seat belt will not fitproperly. In an accident, the seat beltwill not provide adequate protectionand you could be seriously injured.Do not use the extender or chooseone shorter in length if the distancebetween the extender's buckle andthe center of the user's body is lessthan 15 cm (6 in).

NOTEWhen not in use, remove the seat belt extenderand store it in the vehicle. If the seat beltextender is left connected, the seat beltextender might get damaged as it will notretract with the rest of the seat belt and caneasily fall out of the door when not in use andbe damaged. In addition, the seat belt warninglight will not illuminate and function properly.


Seat Belt Systems

2-25


Form No.8AD6-EC-09A

Black plate (40,1)

Seat Belt Warning Light/Beep

The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition is switched ON.

Conditions of operation

Condition Result

The driver's seat belt is notfastened when the ignition isswitched ON.

The warning lightilluminates for about 1minute and a beepsound will be heardfor about 6 seconds.

The driver's seat belt isfastened while the warninglight and the beep sound areactivated.

The warning lightturns off and the beepsound stops.

The driver's seat belt isfastened before the ignitionis switched ON.

The warning light willnot illuminate and thebeep sound will not beheard.

qBelt Minder

NOTEThe belt minder can be deactivated. Consult anAuthorized Mazda Dealer to deactivate orrestore the seat belt minder.

Driver seated/Front passenger notseated

The belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition is switched ON, thewarning light/beep operates to give youfurther reminders according to the chartbelow.

Condition

Vehicle speed

Between 0 20km/h

(0 12 mph)

20 km/h(12 mph) or

more

Seat belt

Indicator

Beep

: Fastened: Unfastened: Illuminated: Flashing: Beep

Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.

2-26


Seat Belt Systems


Form No.8AD6-EC-09A

Black plate (41,1)

Driver seated/Front passenger seated

The seat belt warning function remindsthe front passenger to fasten the seat beltaccording to the chart below.

Condition

Vehicle speed

Between 0 20km/h

(0 12 mph)

20 km/h(12 mph) or

more

Seat belt(Driver)

Seat belt(Passenger)

Indicator

Beep

: Fastened: Unfastened: Illuminated: Flashing: Beep

Placing heavy items on the frontpassenger seat may cause the frontpassenger seat belt warning function tooperate depending on the weight of theitem.

Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.

NOTEl To allow the front passenger seat weight

sensor to function properly, do not placeand sit on an additional seat cushion on thefront passenger seat. The sensor may notfunction properly because the additionalseat cushion could cause sensorinterference.

l When a small child sits on the frontpassenger seat, it is possible that neitherthe warning light nor the warning beepoperate.


Seat Belt Systems

2-27


Form No.8AD6-EC-09A

Black plate (42,1)

Child Restraint PrecautionsMazda strongly urges the use of child-restraint systems for children small enough to usethem.

You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirements regarding the safetyof children riding in your vehicle.

Whatever child-restraint system you consider, please pick the appropriate one for the ageand size of the child, obey the law and follow the instructions that come with the individualchild-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts,both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer tothe center of the vehicle in the outboard seats, and towards the buckle on the right if thechild is seated on the center seat.

Statistics confirm that the rear seat is the best place for all children up to 12 years of age,and more so with a supplemental restraint system (air bags).

A rear-facing child-restraint system should NEVER be used on the front seat with the airbag system activated. The front passenger's seat is also the least preferred seat for otherchild-restraint systems.

To reduce the chance of injuries caused by deployment of the front passenger air bag, thefront passenger seat weight sensors work as a part of the supplemental restraint system.This system deactivates the front passenger front and side air bags and also the frontpassenger seat belt pretensioner system when the total seated weight on the front passengerseat is less than approximately 30 kg (66 lb).

When an infant or small child sits on the front passenger seat, the system shuts off the frontpassenger front and side air bags and seat belt pretensioner system, so make sure the frontpassenger air bag deactivation indicator light illuminates.

Even if the front passenger air bag is shut off, Mazda strongly recommends that children beproperly restrained and child-restraint systems of all kinds are properly secured on the rearseats which are the best place for children.

For more details, refer to Front passenger seat weight sensors (page 2-56).

2-28


Child Restraint


Form No.8AD6-EC-09A

Black plate (43,1)

WARNINGUse the correct size child-restraint system:

For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained using a seat belt or child-restraint system depending on age andsize. If not, the child could be seriously injured or even killed in an accident.

Follow the manufacturer's instructions and always keep the child-restraint systembuckled down:

An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Makesure any child-restraint system is properly secured in place according to the child-restraint system manufacturer's instructions. When not in use, remove it from thevehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchorsfor LATCH child-restraint systems and the corresponding tether anchor.

Always secure a child in a proper child-restraint system:Holding a child in your arms while the vehicle is moving is extremely dangerous. Nomatter how strong the person may be, he or she cannot hold onto a child in asudden stop or collision and it could result in serious injury or death to the child orother occupants. Even in a moderate accident, the child may be exposed to air bagforces that could result in serious injury or death to the child, or the child may beslammed into an adult, causing injury to both child and adult.

Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:

Rear-facing child-restraint systems on the front seat are particularly dangerous eventhough you may feel assured that a front passenger air bag will not deploy based onthe fact that the front passenger air bag deactivation indicator light illuminates.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child.


Child Restraint

2-29


Form No.8AD6-EC-09A

Black plate (44,1)

Do not install a front-facing child-restraint system on the front passenger seat unlessit is unavoidable:

In a collision, the force of a deploying air bag could cause serious injury or death tothe child. If installing a front-facing child-restraint system on the front passengerseat is unavoidable, move the front passenger seat as far back as possible.

Seating a child in a child-restraint system on the front passenger seat is dangerous:Your vehicle is equipped with front passenger seat weight sensors. Even with thefront passenger seat weight sensors, if you must use the front passenger seat to seata child, using a child in a child-restraint system on the front passenger seat underthe following conditions increases the danger of the front passenger air bagdeploying and could result in serious injury or death to the child. The total seated weight of the child with the child-restraint system on the front

passenger seat is approximately 30 kg (66 lb) or more with a child in the child-restraint system.

Luggage or other items are placed on the seat with the child in the child-restraintsystem.

A rear passenger or luggage pushing or pulling down on the front passengerseatback.

A rear passenger puts their feet on the front seat rails. Luggage or other items are placed on the seatback or hung on the head restraint. Heavy items are placed in the seatback map pocket. The seat is washed. Liquids are spilled on the seat. The front passenger seat is moved backward, pushing into luggage or other items

placed behind it. The front passenger seatback contacts the rear seat. Luggage or other items are placed between the front passenger seat and driver

seat. Any accessories, which might increase the total seated weight on the front

passenger seat, are attached to the front passenger seat.The designated positions with seat belts on the rear seats are the safest places forchildren. Always use seat belts and child restraints.

2-30


Child Restraint


Form No.8AD6-EC-09A

Black plate (45,1)

Do not allow a child or anyone to lean over or against the side window of a vehiclewith side and curtain air bags:

It is dangerous to allow anyone to lean over or against the side window, the area ofthe front passenger seat, the front and rear window pillars and the roof edge alongboth sides from which the side and curtain air bags deploy, even if a child-restraintsystem is used. The impact of inflation from a side or curtain air bag could causeserious injury or death to an out of position child. Furthermore, leaning over oragainst the front door could block the side and curtain air bags and eliminate theadvantages of supplemental protection. With the front air bag and the additionalside air bag that comes out of the front seat, the rear seat is always a better locationfor children. Take special care not to allow a child to lean over or against the sidewindow, even if the child is seated in a child-restraint system.

Never use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat beltused in this way cannot spread the impact forces properly and the two passengerscould be crushed together and seriously injured or even killed. Never use one belt formore than one person at a time and always operate the vehicle with each occupantproperly restrained.

CAUTIONA seat belt or child-restraint system can become very hot in a closed vehicle duringwarm weather. To avoid burning yourself or a child, check them before you or yourchild touches them.

NOTEYour Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCHchild-restraint systems in the rear seat. When using these anchors to secure a child-restraint system,refer to LATCH Child-Restraint Systems (page 2-39).


Child Restraint

2-31


Form No.8AD6-EC-09A

Black plate (46,1)

Installing Child-RestraintSystems

Accident statistics reveal that a child issafer in the rear seat. The front passenger'sseat is clearly the worst choice for anychild under 12, and with rear-facing child-restraint systems it is clearly unsafe due toair bags.

Some child-restraint systems now comewith tethers and therefore must beinstalled on the seats that take tethers tobe effective. In your Mazda, tetheredchild-restraint systems can only beaccommodated in the three positions onthe rear seat.

Even if your vehicle is equipped withfront passenger seat weight sensors (page2-56), which automatically deactivates thefront passenger air bag, a rear seat is thesafest place for a child of any age or size.

Some child-restraint systems also employspecially designed LATCH attachments;refer to LATCH Child-RestraintSystems (page 2-39).

WARNINGTethered Child-Restraint Systems WorkOnly on Tether-Equipped Rear Seats:

Installation of a tether equippedchild-restraint system in the frontpassenger's seat defeats the safetydesign of the system and will result inan increased chance of serious injuryif the child-restraint system goesforward without benefit of beingtethered.Place tether equipped child-restraintsystems where there are tetheranchors.

qRear Seat Child-Restraint SystemInstallation

Follow these instructions when using achild-restraint system, unless you areattaching a LATCH-equipped child-restraint system to the rear LATCH loweranchors. Refer to LATCH Child-Restraint Systems (page 2-39).

NOTEFollow the child-restraint systemmanufacturer's instructions carefully. If youare not sure whether you have a LATCHsystem or tether, check in the child-restraintsystem manufacturer's instructions and followthem accordingly. Depending on the type ofchild-restraint system, it may use LATCHsystem instead of seat belts or if the belt goesacross the child's chest, may recommendagainst using automatic locking mode.

1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.

2. Remove the head restraint (exceptcenter seat position).Refer to Head Restraints on page 2-12.

3. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

2-32


Child Restraint


Form No.8AD6-EC-09A

Black plate (47,1)

4. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

5. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Aclicking noise from the retractor will beheard during retraction if the system isin the automatic locking mode. If thebelt does not lock the seat down tight,repeat this step.

NOTEInspect this function before each use of thechild-restraint system. You should not be ableto pull the shoulder belt out of the retractorwhile the system is in the automatic lockingmode. When you remove the child-restraintsystem, be sure the belt fully retracts to returnthe system to emergency locking mode beforeoccupants use the seat belts.

6. If your child-restraint system requiresthe use of a tether strap, refer to themanufacturer's instructions to hook andtighten the tether strap.

Anchor bracket location (4 Door)

Anchor bracket

Tether strap position (4 Door)

Anchor bracket

Tether strap


Child Restraint

2-33


Form No.8AD6-EC-09A

Black plate (48,1)

Anchor bracket location (5 Dooroutboard position)

Tether strap position (5 Door outboardposition)

Forward

Tether strap

Anchor bracket location (5 Door centerposition)

Tether strap position (5 Door centerposition)

Tether strap

7. Install the head restraint.Refer to Head Restraints on page 2-12.

2-34


Child Restraint


Form No.8AD6-EC-09A

Black plate (49,1)

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:

Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether ortether anchor and result in injury.

Always route the tether strap betweenthe head restraint and the seatback(Except center position):

Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slideoff the head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.

Always attach the tether strap to thecorrect tether anchor position:

Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.

qIf You Must Use the Front Seatfor Children

If you cannot put all children in the rearseat, at least put the smallest children inthe rear and be sure the largest child upfront uses the shoulder belt over theshoulder.NEVER put a rear-facing child-restraintsystem on the front passenger seat, evenwith a seat weight sensor equippedvehicle.This seat is also not set up for tetheredchild-restraint systems, put them in one ofthe rear seat positions set up with tetheranchors.Likewise the LATCH child-restraintsystem cannot be secured in the frontpassenger's seat and should be used in therear seat.Do not allow anyone to sleep against theside window if you have an optional sideand curtain air bag, it could cause seriousinjuries to an out of position occupant. Aschildren more often sleep in cars, it isbetter to put them in the rear seat. Ifinstalling the child-restraint system on thefront seat is unavoidable, follow theseinstructions when using a front-facingchild-restraint system in the frontpassenger's seat.

NOTEl To check if your front seats have side air

bags:Mazda vehicles equipped with side air bagwill have a SRS AIRBAG tag on theoutboard shoulder of the front seats.

l To check if your vehicle has curtain airbags:Mazda vehicles equipped with curtain airbag will have an SRS AIRBAG markingon the window pillars along the roof edge.


Child Restraint

2-35


Form No.8AD6-EC-09A

Black plate (50,1)

WARNINGAlways move the front passenger seatas far back as possible if installing afront-facing child-restraint system on itis unavoidable:

As your vehicle has front air bagsand doubly so because your vehiclehas side air bags, a front-facingchild-restraint system should be puton the front passenger seat onlywhen it is unavoidable.Even if the front passenger air bagdeactivation indicator lightilluminates, always move the seat asfar back as possible, because theforce of a deploying air bag couldcause serious injury or death to thechild.

Never use a rear-facing child-restraintsystem in the front seat with an air bagthat could deploy:

Rear-facing child-restraint systemson the front seat are particularlydangerous.Even in a moderate collision, thechild-restraint system can be hit by adeploying air bag and movedviolently backward resulting inserious injury or death to the child.Even though you may feel assuredthat the front passenger air bag willnot deploy based on the fact that thefront passenger air bag deactivationindicator light illuminates.

Do not allow a child or anyone to leanover or against the side window of avehicle with side and curtain air bags:

It is dangerous to allow anyone tolean over or against the side window,the area of the front passenger seat,the front and rear window pillars andthe roof edge along both sides fromwhich the side and curtain air bagsdeploy, even if a child-restraintsystem is used. The impact ofinflation from a side or curtain airbag could cause serious injury ordeath to an out of position child.Furthermore, leaning over or againstthe front door could block the sideand curtain air bags and eliminatethe advantages of supplementalprotection. With the front air bag andthe additional side air bag thatcomes out of the front seat, the rearseat is always a better location forchildren. Take special care not toallow a child to lean over or againstthe side window, even if the child isseated in a child-restraint system.

qFront Passenger's Seat Child-Restraint System Installation

1. Slide the seat as far back as possible.

2-36


Child Restraint


Form No.8AD6-EC-09A

Black plate (51,1)

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Aclicking noise from the retractor will beheard during retraction if the system isin automatic locking mode. If the beltdoes not lock the seat down tight,repeat the previous step and also thisone.

NOTEl Inspect this function before each use of the

child-restraint system. You should not beable to pull the shoulder belt out of theretractor while the system is in theautomatic locking mode. When you removethe child-restraint system, be sure the beltfully retracts to return the system toemergency locking mode before occupantsuse the seat belts.

l Follow the child-restraint systemmanufacturer's instructions carefully.Depending on the type of child-restraintsystem, it may not employ seat belts whichare in automatic locking mode.

5. Make sure the front passenger air bagdeactivation indicator light illuminatesafter installing a child-restraint systemon the front passenger seat.Refer to Front passenger air bagdeactivation indicator light on page2-56.


Child Restraint

2-37


Form No.8AD6-EC-09A

Black plate (52,1)

WARNINGDo not seat a child in a child-restraintsystem on the front passenger seat ifthe front passenger air bagdeactivation indicator light does notilluminate:

While it is always better to install anychild-restraint system on the rearseat, it is imperative that a child-restraint system ONLY be used on thefront passenger seat if thedeactivation indicator lightilluminates when the child is seatedin the child-restraint system (page2-56). Seating a child in a child-restraint system installed on the frontpassenger seat with the frontpassenger air bag deactivationindicator light not illuminated isdangerous. If this indicator light doesnot illuminate even when the totalseated weight is less thanapproximately 30 kg (66 lb), thismeans that the front passenger frontand side air bags, and seat beltpretensioner are ready fordeployment. If an accident were todeploy an air bag, a child in a child-restraint system sitting in the frontpassenger seat could be seriouslyinjured or killed. If the indicator lightdoes not illuminate after seating achild in a child-restraint system onthe front passenger seat, seat a childin a child-restraint system on the rearseat and consult an AuthorizedMazda Dealer as soon as possible.

2-38


Child Restraint


Form No.8AD6-EC-09A

Black plate (53,1)

LATCH Child-Restraint SystemsYour Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise theseat will bounce around and put the child in danger. Most LATCH child-restraint systemsmust also be used in conjunction with a tether to be effective. If they have a tether youmust use it to better assure your child's safety.

WARNINGFollow the manufacturer's instructions for the use of the child-restraint system:

An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Makesure the child-restraint system is properly secured in place according to the child-restraint system manufacturer's instructions.

Never attach two child-restraint systems to the same LATCH lower anchor:Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.In a collision, one anchor may not be strong enough to hold two child-restraintsystem attachments, and it may break, causing serious injury or death. If you use theseat position for another child-restraint system when an outboard LATCH position isoccupied, use the center seat belts instead, and the tether if tether-equipped.

Make sure the child-restraint system is properly secured:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Followthe child-restraint system manufacturer's instructions on belt routing to secure theseat just as you would with a child in it so that nobody is tempted to put a child inan improperly secured seat later on. When not in use, remove it from the vehicle orfasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCHchild-restraint systems.

Make sure there are no seat belts or foreign objects near or around the LATCH child-restraint system:

Not following the child-restraint system manufacturer's instructions when installingthe child-restraint system is dangerous. If seat belts or a foreign object prevent thechild-restraint system from being securely attached to the LATCH lower anchors andthe child-restraint system is installed improperly, the child-restraint system couldmove in a sudden stop or collision causing serious injury or death to the child orother occupants. When installing the child-restraint system, make sure there are noseat belts or foreign objects near or around the LATCH lower anchors. Always followthe child-restraint system manufacturer's instructions.


Child Restraint

2-39


Form No.8AD6-EC-09A

Black plate (54,1)

qLATCH Child-Restraint SystemInstallation Procedure (RearOutboard Seats)

1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.

2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.

NOTEThe markings above the LATCH lower anchorsindicate the locations of LATCH loweranchors for the attachment of a child-restraintsystem.

3. Remove the head restraint.Refer to Head Restraints on page 2-12.

4. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instruction. Pull on thechild-restraint to be sure both anchorsare engaged.

5. If your child-restraint system cameequipped with a tether, that means it isvery important to properly secure thetether for child safety. Please carefullyfollow the child-restraint systemmanufacturer's instructions wheninstalling tethers.


Anchor bracket


Anchor bracket

Tether strap

2-40


Child Restraint


Form No.8AD6-EC-09A

Black plate (55,1)



Forward

Tether strap

6. Install the head restraint.Refer to Head Restraints on page 2-12.

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:

Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether ortether anchor and result in injury.

Always route the tether strap betweenthe head restraint and the seatback:

Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slideoff the head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.

Always attach the tether strap to thecorrect tether anchor position:

Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.


Child Restraint

2-41


Form No.8AD6-EC-09A

Black plate (56,1)

qLATCH Child-Restraint SystemInstallation Procedure (RearCenter Seat)

The LATCH lower anchors at the centerof the rear seat are much further apart thanthe sets of LATCH lower anchors forchild-restraint system installation at otherseating positions. Child-restraint systemswith rigid LATCH attachments cannot beinstalled on the center seating position.Some LATCH equipped child-restraintsystems can be placed in the centerpositi

Documents

2010 Mazda 3 Omeng