2
 Gates Bl ack Gold ® Certification/Standards OFFSHORE LAND RIG  Motion Compensator Hose 5,000 psi W.P. -10,000 psi Test Grade D 12,500 Minimum Burst  Coupling/Mat’l Traceability (Additional Cost) ISO 14693 Letter of Conformance (Additional Cost) Test Certificates 3 rd Party Witness Test (Additional Cost)  ABS/CDS Ty pe Approval Specificati on 4774 PE RECOMMENDED FOR: Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of d irectional drilling and down linki ng with negative pressure puls es and elevated temperatures . Motion Compensat or hose is used offshore drill platforms. The Motion Compensa tor h ose is not recommended for phosphate ester fluids. TEMPERATURE: -4ºF to +180ºF (-20ºC to +82ºC). TUBE: Type C 3 (Modified Nitrile). 3/16” thic k. Black. Specially compounded for hand ling abrasive, corrosive and oily drilling mud. REINFORCEMENT: Multiple layers of polyest er cord over tube. Multiple layers of “close wound”, high tensile steel cables, wit h one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement under cover. COVER: Type C 4 (Modified Nitril e). Black. Specially c ompounded UltraBras ion cover is resistant to abrasion, corrosion , cutting, gouging, oil and weat her. One continuous longitud inal yellow transfer label . Serial number and manufacture date embossed. COUPLINGS: Swaged API male line pipe threads standard. Gates recommends butt-welded couplings. Couplings can be supplied wit h your choice of end fitting (see “Most  Female Sub Male Sub./Nut Commonly used Welded-On Fittings” section for more detailed information). NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED. FITTINGS: Hammer Unions Hubs Flanges  Available Sizes Inches 2-1/2 3 3-1/2 4 S ec.   AVAIL ABL E SIZES: Nom. O.D. 4.14 4.61 5.25 5.61 4774PE Min. Bend Radius (Inches) 36 48 54 54 Wt. per Ft. of hose (Lbs) 9.8 10.8 12.8 13.4 Coupling Threads API (T) (In.) 3" 4" 4" 5" Swage Cplg. Wts. Each (Lbs) 33 44.5 47 55 Page 42 OPTIONAL:  Accessories such as SAFETY CLAMPS, HOSE LIFT EYE & COLLA R CLAMP and STAINLESS STEEL ARMOR are found on page 53. Maximum length of hose (Feet) 90 90 90 90 Safety Clamp & Chain Part No. 7361-0825 7361-0830 7361-0835 7361-0840

2008 BlackGold Rotary Grade D 5K

  • Upload
    ana1312

  • View
    215

  • Download
    0

Embed Size (px)

DESCRIPTION

Rotary Table grading catalog

Citation preview

  • Gates Black Gold Rotary Drilling/Vibrator Hose or Certification/StandardsAPI 7K

    OFFSHORE LAND RIG

    Rotary Drilling/Vibrator Hose or Motion Compensator Hose5,000 psi W.P. - 10,000 psi Test Grade D12,500 Minimum Burst

    API 7KCoupling/Matl Traceability (Additional Cost)ISO 14693Letter of Conformance (Additional Cost)Test Certificates3rd Party Witness Test (Additional Cost)ABS/CDS Type Approval

    Specification 4774 PE

    RECOMMENDED FOR: Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. Motion Compensator hose is used for stabilization of rotary drilling and pumping equipment against vertical wave action onfor stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

    TEMPERATURE: -4F to +180F (-20C to +82C).

    TUBE: Type C3 (Modified Nitrile). 3/16 thick. Black. Specially compounded for handling abrasive, corrosive and oily drilling mud.

    REINFORCEMENT: Multiple layers of polyester cord over tube. Multiple layers of close wound, high tensile p y p y p y gsteel cables, with one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement under cover.

    COVER: Type C4 (Modified Nitrile). Black. Specially compounded UltraBrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather. One continuous longitudinal yellow transfer label. Serial number and manufacture date embossed.

    COUPLINGS: Swaged API male line pipe threads standard. Gates recommends butt-welded couplings. Couplings can be supplied with your choice of end fitting (see Most

    Female Sub Male Sub./Nut

    p g p g pp y g (Commonly used Welded-On Fittings section for more detailed information).NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

    FITTINGS: Hammer Unions Hubs Flanges

    Available Sizes (Inches) 2-1/2 3 3-1/2 4 Spec.

    AVAILABLE SIZES:

    ( ) p

    Nom. O.D. 4.14 4.61 5.25 5.61 4774PE

    Min. Bend Radius (Inches) 36 48 54 54

    Wt. per Ft. of hose (Lbs) 9.8 10.8 12.8 13.4

    Coupling Threads API (T) (In.) 3" 4" 4" 5"

    Swage Cplg. Wts. Each (Lbs) 33 44.5 47 55

    Page 42

    OPTIONAL: Accessories such as SAFETY CLAMPS, HOSE LIFT EYE & COLLAR CLAMP and STAINLESS STEEL ARMOR are found on page 53.

    Maximum length of hose (Feet) 90 90 90 90

    Safety Clamp & Chain Part No. 7361-0825 7361-0830 7361-0835 7361-0840

    Robs

    co

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight

    lyb-37Highlight