Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Black plate (1,1)
Mazda3_8V66-EA-06F_Edition3 Page1Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (2,1)
Mazda3_8V66-EA-06F_Edition3 Page2Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (3,1)
Thank you for choosing a Mazda. We at Mazda design and build vehicles with completecustomer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manualcarefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service isnecessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the bestpossible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasureand in your full satisfaction with your Mazda product.
Mazda Motor CorporationHIROSHIMA, JAPAN
Important Notes About This ManualKeep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should youresell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal atMazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Event Data RecorderThis vehicle is equipped with an event data recorder. In the event of a crash, this device records data related tovehicle dynamics and safety systems for a short period of time. These data can help provide a betterunderstanding of the circumstances in which crashes and injuries occur and lead to the designing of safervehicles.
Air Conditioning and the EnvironmentYour Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not todamage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized MazdaDealer.
Please be aware that this manual applies to all models, equipment and options. As a result, you may findsome explanations for equipment not installed on your vehicle.
©2006 Mazda Motor CorporationPrinted in Japan Oct. 2006(Print3)
AWord to Mazda Owners
Mazda3_8V66-EA-06F_Edition3 Page3Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (4,1)
We want to help you get the most drivingpleasure from your vehicle. Your owner'smanual, when read from cover to cover,can do that in many ways.
Illustrations complement the words of themanual to best explain how to enjoy yourMazda. By reading your manual, you canfind out about the features, importantsafety information, and driving undervarious road conditions.
The symbol below in this manual means“Do not do this” or “Do not let thishappen”.
Index: A good place to start is the Index,an alphabetical listing of all informationin your manual.
You'll find several WARNINGs,CAUTIONs, and NOTEs in the manual.
WARNINGAWARNING indicates a situation inwhich serious injury or death couldresult if the warning is ignored.
CAUTIONA CAUTION indicates a situation inwhich bodily injury or damage to yourvehicle, or both, could result if thecaution is ignored.
NOTE
A NOTE provides information andsometimes suggests how to make betteruse of your vehicle.
The symbol below, located on some partsof the vehicle, indicates that this manualcontains information related to the part.Please refer to the manual for a detailedexplanation.
How to Use This Manual
Mazda3_8V66-EA-06F_Edition3 Page4Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (5,1)
Mazda3_8V66-EA-06F_Edition3 Page5Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Table of Contents
Your Vehicle at a GlanceInterior, exterior views and part identification of your Mazda.
1
Essential Safety EquipmentUse of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.
2
Knowing Your MazdaExplanation of basic operations and controls; opening/closing and adjustmentof various parts.
3
Before Driving Your MazdaImportant information about driving your Mazda.
4
Driving Your MazdaExplanation of instruments and controls.
5
Interior ComfortUse of various features for drive comfort, including air-conditioning and audiosystem.
6
In Case of an EmergencyHelpful information on what to do in an emergency.
7
Maintenance and CareHow to keep your Mazda in top condition.
8
Customer Information and Reporting Safety DefectsImportant consumer information including warranties and add-on equipment.
9
SpecificationsTechnical information about your Mazda.
10
Index 11
Navigation System
Black plate (6,1)
Mazda3_8V66-EA-06F_Edition3 Page6Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (7,1)
1 Your Vehicle at a Glance
Interior, exterior views and part identification of your Mazda.
Dashboard and Interior Overview .............................................. 1-2
Exterior Overview ......................................................................... 1-4
1-1
Mazda3_8V66-EA-06F_Edition3 Page7Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (8,1)
The equipment and installation position varies by vehicle.*Refer to Navigation System at the end of the manual (if equipped).
Power window lock switch ................................................................................ page 3-20Power window switches .................................................................................... page 3-19Power door lock switch ..................................................................................... page 3-10
1-2
Your Vehicle at a Glance
Dashboard and Interior Overview
Mazda3_8V66-EA-06F_Edition3 Page8Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (9,1)
Headlight leveling switch .................................................................................. page 5-53Dashboard illumination knob ............................................................................ page 5-36Lighting control/Turn signal .............................................................................. page 5-51Instrument cluster .............................................................................................. page 5-32SRS air bags ...................................................................................................... page 2-41Cruise control switches ...................................................................................... page 5-19Wiper and washer lever ..................................................................................... page 5-55Hazard warning flasher switch .......................................................................... page 5-61Information display ............................................................................................ page 6-55Audio system ..................................................................................................... page 6-17Glove box .......................................................................................................... page 6-63Center console ................................................................................................... page 6-63Parking brake ....................................................................................................... page 5-5Cup holder ......................................................................................................... page 6-61MT shift lever ...................................................................................................... page 5-9AT shift lever (Sport AT) ................................................................................... page 5-11Lighter ............................................................................................................... page 6-60Rear window defroster switch ........................................................................... page 5-60Ashtray ............................................................................................................... page 6-61Climate control system ........................................................................................ page 6-2Ignition switch ..................................................................................................... page 5-2Steering column release lever ............................................................................ page 3-31Audio control switches ...................................................................................... page 6-45Remote fuel-filler lid release ............................................................................. page 3-21Hood release handle .......................................................................................... page 3-22Outside mirror switch ........................................................................................ page 3-31Interior lights ..................................................................................................... page 6-52Sunvisor ............................................................................................................. page 6-52Rearview mirror ................................................................................................. page 3-32Vanity mirror ...................................................................................................... page 6-52Front seat ............................................................................................................. page 2-2Seat belt ............................................................................................................. page 2-10Rear seat .............................................................................................................. page 2-5
Your Vehicle at a Glance
Dashboard and Interior Overview
1-3
Mazda3_8V66-EA-06F_Edition3 Page9Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (10,1)
The equipment and installation position varies by vehicle.
4 Door
1-4
Your Vehicle at a Glance
Exterior Overview
Mazda3_8V66-EA-06F_Edition3 Page10Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (11,1)
Trunk lid ............................................................................................................ page 3-15Antenna ............................................................................................................. page 6-16Rear window defroster ....................................................................................... page 5-60Power window ................................................................................................... page 3-19Tires ................................................................................................................... page 8-36Fuel-filler lid ...................................................................................................... page 3-21Light bulbs ......................................................................................................... page 8-41Hood .................................................................................................................. page 3-22Windshield wiper blades .................................................................................... page 8-29Moonroof ........................................................................................................... page 3-24Child safety lock ................................................................................................ page 3-11Door lock ............................................................................................................. page 3-9Outside mirror .................................................................................................... page 3-31
Your Vehicle at a Glance
Exterior Overview
1-5
Mazda3_8V66-EA-06F_Edition3 Page11Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (12,1)
The equipment and installation position varies by vehicle.
5 Door
1-6
Your Vehicle at a Glance
Exterior Overview
Mazda3_8V66-EA-06F_Edition3 Page12Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (13,1)
Liftgate .............................................................................................................. page 3-12Rear window defroster ....................................................................................... page 5-60Rear wiper blade ................................................................................................ page 8-31Antenna ............................................................................................................. page 6-16Fuel-filler lid ...................................................................................................... page 3-21Power window ................................................................................................... page 3-19Tires ................................................................................................................... page 8-36Light bulbs ......................................................................................................... page 8-41Hood .................................................................................................................. page 3-22Windshield wiper blades .................................................................................... page 8-29Moonroof ........................................................................................................... page 3-24Child safety lock ................................................................................................ page 3-11Door lock ............................................................................................................. page 3-9Outside mirror .................................................................................................... page 3-31
Your Vehicle at a Glance
Exterior Overview
1-7
Mazda3_8V66-EA-06F_Edition3 Page13Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (14,1)
1-8
Mazda3_8V66-EA-06F_Edition3 Page14Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (15,1)
2 Essential Safety Equipment
Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.
Seats ............................................................................................... 2-2Front Seats ................................................................................ 2-2Rear Seat ................................................................................... 2-5
Seat Belt Systems ........................................................................ 2-10Seat Belt Precautions .............................................................. 2-10Seat Belt (Except Center-Rear Position) ................................. 2-13Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-15Center-Rear Position Seat Belt (3-Point Type) ....................... 2-18Seat Belt Extender ................................................................... 2-21Seat Belt Warning Light/Beep ................................................ 2-22
Child Restraint ............................................................................ 2-24Child Restraint Precautions ..................................................... 2-24Installing Child-Restraint Systems .......................................... 2-28LATCH Child-Restraint Systems ............................................ 2-36
SRS Air Bags ............................................................................... 2-41Supplemental Restraint Systems (SRS) Precautions ............... 2-41Supplemental Restraint System Components ......................... 2-46How the Air Bags Work .......................................................... 2-49
2-1
Mazda3_8V66-EA-06F_Edition3 Page15Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (16,1)
Front Seats
WARNINGDo not modify or replace the frontseats:Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.
Do not drive with damaged front seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bag components.If there was a subsequent collision, anair bag may not deploy which couldlead to injuries. Always have anAuthorized Mazda Dealer inspect thefront seats, front seat beltpretensioners and air bags after acollision.
WARNINGMake sure the adjustable componentsof a seat are locked in place:Adjustable seats and seatbacks thatare not securely locked are dangerous.In a sudden stop or collision, the seator seatback could move, causinginjury. Make sure the adjustablecomponents of the seat are locked inplace by attempting to slide the seatforward and backward and rockingthe seatback.
qSeat Slide
WARNINGAdjust the driver seat only when thevehicle is stopped:Adjusting the driver's seat while thevehicle is moving is dangerous. Thedriver could lose control of the vehicleand have an accident.
To move a seat forward or backward, raisethe lever and slide the seat to the desiredposition and release the lever.
2-2
Essential Safety Equipment
Seats
Mazda3_8V66-EA-06F_Edition3 Page16Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (17,1)
Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward.
qSeat Recline
WARNINGDo not drive with the seats reclined:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from seat belts. Duringsudden braking or a collision, you canslide under the lap belt and sufferserious internal injuries. Formaximum protection, sit well back andupright.
Always sit in a passenger seat properlywith the seatback upright and feet onthe floor:If your vehicle is equipped with frontpassenger seat weight sensors, sittingin the front passenger seat improperlyout of position or with the seatbackreclined too far while the vehicle ismoving is dangerous as it can take offweight from the seat bottom and affectthe weight determination of the frontpassenger sensing system. As a resultthe front passenger will not have thesupplementary protection of the airbag and seat belt pretensioner, whichcould cause result in serious injury.Always sit upright against yourseatback, with your feet on the floor.
WARNINGDo not drive with the seatbackunlocked:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After adjusting theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.
To change the seatback angle, leanforward slightly while raising the lever.Then lean back to the desired position andrelease the lever.
Make sure the lever returns to its originalposition and the seatback is locked inplace by attempting to push it forward andbackward.
Essential Safety Equipment
Seats
2-3
Mazda3_8V66-EA-06F_Edition3 Page17Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (18,1)
CAUTIONWhen returning a rear-reclined seatbackto its upright position, make sure youhold onto the seatback with your otherhand while operating the lever. If theseatback is not supported, it will flipforward suddenly and could causeinjury.
qHeight Adjustment (Driver's Seat)í
By moving the seat lever up or down, theseat bottom height can be adjusted.
Down
Up
qLumbar Support Adjustment(Driver's Seat)í
To adjust the lumbar support, pull thelever forward.
qHead Restraint
WARNINGAlways drive with the head restraintsinstalled when seats are being usedand make sure they are properlyadjusted:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.
Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck.
2-4
Essential Safety Equipment
íSome models.
Seats
Mazda3_8V66-EA-06F_Edition3 Page18Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (19,1)
qSeat Warmerí
The front seats are electrically heated. Theignition switch must be in the ONposition.
Press the switch to turn the seat warmeron or off. When the switch is in the ONposition, the indicator light will come on.
NOTE
The seat temperature is regulatedautomatically by a thermostat. Otherthan turning it on or off, it cannot beadjusted.
Rear Seat
WARNINGDo not stack cargo higher than theseatbacks or place articles on the rearpackage tray or on the luggagecompartment cover:Stacking luggage or other cargohigher than the seatbacks, and placingarticles on the rear package tray or onthe luggage compartment cover isdangerous. During sudden braking ora collision, objects can fly around andbecome projectiles that may hit andinjure passengers.
Make sure luggage and cargo issecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.
Make sure the adjustable componentsof a seat are locked in place:Adjustable seats that are not securelylocked are dangerous. In a suddenstop or collision, the seat or seatbackcould move, causing injury.
Essential Safety Equipment
Seats
2-5íSome models.
Mazda3_8V66-EA-06F_Edition3 Page19Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (20,1)
WARNINGDo not drive with the seatbackunlocked:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After returning theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.
Never allow a passenger to sit or standon the folded seatback while thevehicle is moving:Driving with a passenger on the foldedseatback is dangerous. Allowing achild to sit up on the folded seatbackwhile the vehicle is moving isparticularly dangerous. In a suddenstop or even a minor collision, a childnot in a proper seat or child-restraintsystem and seat belt could be thrownforward, back or even out of thevehicle resulting in serious injuries ordeath. The child in the baggage areacould be thrown into other occupantsand cause serious injury.
WARNINGNever give the car keys to children anddo not allow them to play in thevehicle:Playing with the folding rear seats isdangerous. The folding rear seatbackscannot be folded down from inside thetrunk. Once the seatbacks are back up,a child in the trunk would not be ableto get out the way they had entered. Ifyou have small children, keep theseatbacks locked (sedan).
Always leave your car locked and keepthe car keys safely away fromchildren:Leaving your car unlocked or the keysin reach of children is dangerous.Children who find their way into thetrunk through an unlocked rearseatback or an open trunk can becomeaccidentally locked in the trunk. Thiscould result in death or brain damagefrom heat prostration, particularly inthe summer. Always lock the doorsand the trunk, and as an addedmeasure, keep the rear seatbackslocked, whether you have children inyour home or not.
NOTE
When returning a rear seat to itsoriginal position, also replace the seatbelt to its normal position. Verify thatthe seat belt pulls out and retracts.
2-6
Essential Safety Equipment
Seats
Mazda3_8V66-EA-06F_Edition3 Page20Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (21,1)
qSplit-Folding Rear Seatback
To fold the seatbacks
CAUTIONWhen operating the rear seatback knob,make sure you support the seatbackwith your hand. If the seatback is notsupported with your hand, it will flipforward suddenly and could causeinjury to the finger that pushes the rearseatback knob down.
1. Unfasten the lap portion of the center-rear seat belt (page 2-18).
CAUTIONAlways unfasten the lap portion of thebelt before folding the rear-leftseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.
2. Position the outboard seat belts to theside when folding the seatbacks down.
3. Support the seatback with your hand.
4. Push the rear seatback knob down.
To return the seatbacks to the uprightposition
1. Position the outboard seat belts to theside.
2. Lift the seatbacks upright.
3. Make sure the seat belts are fullypulled out from under the seatbacks.
4. Pull on the top of the seatbacks frominside the vehicle to make sure they arelocked.
5. Fasten the center-rear lap/shoulder beltand check that all seat belts are routedproperly for passenger use (page 2-18).
WARNINGAlways make sure the seat belts arefully pulled out from under theseatbacks:A seat belt caught under a seatbackafter the seatback is returned to itsupright position is dangerous. In acollision or sudden stop, the seat beltcannot provide adequate protection.
Essential Safety Equipment
Seats
2-7
Mazda3_8V66-EA-06F_Edition3 Page21Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (22,1)
WARNINGWhen returning the seatback to theupright position, make sure there is nored indication:A rear seatback not fully returned andlocked in the upright position isdangerous. Sudden stops ormaneuvering could cause a seatbackto flip forward suddenly resulting ininjury. If the red indicator is visible onthe back of the rear seatback knob, theseatback is not locked in the uprightposition.
Locked position
Unlocked position
Red indicator
qRear Seatback Lock (4 Door)
To lock or unlock a seatback, move thelever.
NOTE
The seatback locks are part of the trunksecurity system (page 3-16).
qHead Restraint
WARNINGAlways drive with the head restraintsinstalled when seats are being usedand make sure they are properlyadjusted:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.
Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck.
2-8
Essential Safety Equipment
Seats
Mazda3_8V66-EA-06F_Edition3 Page22Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (23,1)
Removal
To remove the head restraint, press thestop-catch release, then pull up on thehead restraint.
qArmrestí
The rear armrest in the center of the rearseatback can be used (no occupant in thecenter seat) or placed upright.
Armrest
Essential Safety Equipment
Seats
2-9íSome models.
Mazda3_8V66-EA-06F_Edition3 Page23Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (24,1)
Seat Belt PrecautionsSeat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the waywhen not in use.
The driver's seat belt has no provisions for child-restraint systems and has only anemergency locking mode. The driver may wear it comfortably, and it will lock during acollision.
However, the front passenger's seat and all rear lap/shoulder belt retractors operate in twomodes: emergency locking mode, and for child-restraint systems, automatic locking mode.While we recommend you put all children in the rear seats, if you must use the frontpassenger seat for a child, slide the front passenger seat as far back as possible and makesure any child-restraint system is secured properly.
WARNINGAlways wear your seat belt and make sure all occupants are properly restrained:Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrown outof the vehicle. They could be seriously injured or even killed. In the same collision,occupants wearing seat belts would be much safer.
Do not wear twisted seat belts:Twisted seat belts are dangerous. In a collision, the full width of the belt is notavailable to absorb the impact. This puts more force on the bones beneath the belt,which could cause serious injury or death.
Never use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way cannot spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.
Do not operate a vehicle with a damaged seat belt:Using a damaged seat belt is dangerous. An accident could damage the belt webbingof the seat belt in use. A damaged seat belt cannot provide adequate protection in acollision. Have an Authorized Mazda Dealer inspect all seat belt systems in use duringan accident before they are used again.
2-10
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page24Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (25,1)
WARNINGHave your seat belts changed immediately if the pretensioner or load limiter has beenexpended:One or both front air bags may deploy, and the corresponding pretensioner(s) mayalso deploy at the same time. While it is safer to use a crash-used seat belt that wasused in an accident than no seat belt at all, using a seat belt with an expendedpretensioner or load limiter loaded reduces the safety available to you. Like the airbags, the seat belt pretensioners will only function once. After they are expended, theywill not function again and must be replaced immediately. If the seat beltpretensioners are not replaced, the risk of injury in a collision will increase. Alwayshave an Authorized Mazda Dealer inspect the seat belt pretensioners and air bagsafter any collision. Expended seat belt pretensioners and air bags must be replacedafter any collision which caused them to deploy. Additionally, the load limiter will onlylimit loads on the chest once in a collision and this is another reason to have the frontseat belts inspected.
CAUTIONBelt retraction may become difficult if the belts and rings are soiled, so try to keep themclean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/ShoulderBelt Webbing” (page 8-66).
Essential Safety Equipment
Seat Belt Systems
2-11
Mazda3_8V66-EA-06F_Edition3 Page25Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (26,1)
qPregnant Women and Persons with Serious Medical Conditions
Pregnant women should always wear seat belts. Ask your doctor for specificrecommendations.The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.The shoulder belt should be worn across your shoulder properly, but never across thestomach area.Persons with serious medical conditions also should wear seat belts. Check with yourdoctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode
In the emergency locking mode, the belt remains comfortable on the occupant and theretractor will lock in position during a collision. When the seat belt is fastened, it willalways be in the emergency locking mode until it is switched to automatic locking mode bypulling it all the way out to its full length. If the belt feels tight and hinders comfortablemovement while the vehicle is stopped or in motion, it may be in the automatic lockingmode because the belt has been pulled too far out. To return to the belt to the morecomfortable emergency locking mode, wait until the vehicle has stopped in a safe, levelarea, retract the belt fully to convert it back to emergency locking mode and then extend itaround you again.
qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an accident. To enable seat belt automatic locking mode,pull it all the way out and connect it as instructed on the child-restraint system. It willretract down to the child-restraint system and stay locked on it. See the section on childrestraint (page 2-24).
2-12
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page26Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (27,1)
Seat Belt (Except Center-Rear Position)
NOTE
When using the center-rear seat belt,refer to “Center-Rear Position SeatBelt” (page 2-18).
qFastening the Seat Belt
1. Grasp the tongue.
2. Slowly pull out the lap/shoulder belt.
Tongue
Belt
3. Insert the tongue into the buckle untilyou hear a click.
Buckle
Tongue
WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.
4. Position the lap belt as low as possible,not on the abdominal area, then adjustthe shoulder belt so that it fits snuglyagainst your body.
Keep low on hip bone
Too high
Take up slack
WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.
Essential Safety Equipment
Seat Belt Systems
2-13
Mazda3_8V66-EA-06F_Edition3 Page27Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (28,1)
qUnfastening the Seat Belt
Depress the button on the buckle. If thebelt does not fully retract, pull it out andcheck for kinks or twists. Then make sureit remains untwisted as it retracts.
Button
NOTE
If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer.
qShoulder Belt Adjusterí
Adjust the height of the shoulder belt ifthe seat belt touches your neck, or if itcrosses your arm instead of your shoulder.To raise the shoulder belt adjuster, pushthe adjuster up. To lower the shoulder beltadjuster, pull the adjuster and slide itdown. Make sure the adjuster is locked.
To raise To lower
WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.
2-14
Essential Safety Equipment
íSome models.
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page28Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (29,1)
Front Seat Belt Pretensionerand Load Limiting Systems
For optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner and load limitingsystems. For both these systems to workproperly you must wear the seat beltproperly.
Pretensioners:In moderate or severe frontal or near-frontal accidents, the front air bag andpretensioner systems deploysimultaneously when the seat belt is worn.If the front seat occupant is not wearing aseat belt, that person's pretensioner willnot fire even if the air bag does. The frontseat belt retractors remove slack quicklyas the air bags are expanding.In addition, the pretensioner system forthe front passenger, like the frontpassenger air bag, is designed to onlydeploy in accordance with the total seatedweight on the front passenger seat. Anytime the air bags and seat beltpretensioners have fired they must bereplaced. For details, refer to the frontpassenger seat weight sensors (page 2-49).
Load limiter:The load limiting system releases beltwebbing in a controlled manner to reducebelt force on the occupant's chest. Whilethe most severe load on a seat belt occursin frontal collisions, the load limiter hasan automatic mechanical function and canactivate in any accident mode withsufficient occupant movement.Even if the pretensioners have not fired,the load limiting function must bechecked by an Authorized Mazda Dealer.
WARNINGWear seat belts only as recommendedin this owner's manual:Incorrect positioning of the driver andfront passenger seat belts isdangerous. Without properpositioning, the pretensioner and loadlimiting systems cannot provideadequate protection in an accidentand this could result in serious injury.For more details about wearing seatbelts, refer to “Fastening the seatbelts” (page 2-13).
Essential Safety Equipment
Seat Belt Systems
2-15
Mazda3_8V66-EA-06F_Edition3 Page29Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (30,1)
WARNINGHave your seat belts changedimmediately if the pretensioner or loadlimiter has been expended:One or both front air bags may deploy,and the corresponding pretensioner(s)may also deploy at the same time.While it is safer to use a crash-usedseat belt that was used in an accidentthan no seat belt at all, using a seatbelt with an expended pretensioner orload limiter loaded reduces the safetyavailable to you. Like the air bags, theseat belt pretensioners will onlyfunction once. After they areexpended, they will not function againand must be replaced immediately. Ifthe seat belt pretensioners are notreplaced, the risk of injury in acollision will increase. Always have anAuthorized Mazda Dealer inspect theseat belt pretensioners and air bagsafter any collision. Expended seat beltpretensioners and air bags must bereplaced after any collision whichcaused them to deploy. Additionally,the load limiter will only limit loads onthe chest once in a collision and this isanother reason to have the front seatbelts inspected.
Do not modify the components orwiring, or use electronic testingdevices on the pretensioner system:Modifying the components or wiringof the pretensioner system, includingthe use of electronic testing devices isdangerous. You could accidentallyactivate it or make it inoperable whichwould prevent it from activating in anaccident. The occupants or repairerscould be seriously injured.
WARNINGProperly dispose of the pretensionersystem:Improper disposal of the pretensionersystem or a vehicle with non-deactivated pretensioners isdangerous. Unless all safetyprocedures are followed, injury couldresult. Ask an Authorized MazdaDealer how to safely dispose of thepretensioner system or how to scrap apretensioner-equipped vehicle.
NOTE
l The pretensioner system will activatein a moderate or greater frontal ornear-frontal collision. Thepretensioner system for the frontpassenger is designed to only deployin accordance with the total seatedweight on the front passenger seat. Itwill not activate in most rollovers,side or rear impacts.
l Some smoke (non-toxic gas) will bereleased when the air bags andpretensioners deploy. This does notindicate a fire. This gas normally hasno effect on occupants, however,those with sensitive skin mayexperience light skin irritation. Ifresidue from the deployment of theair bags or the front pretensionersystem gets on the skin or in theeyes, wash it off as soon as possible.
2-16
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page30Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (31,1)
qAir Bag/Front Seat BeltPretensioner System Warning Light
If the air bag/front seat belt pretensionersystem is working properly, the warninglight illuminates when the ignition switchis turned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.
A system malfunction is indicated if thewarning light constantly illuminates ordoes not illuminate at all when theignition switch is turned to the ONposition. If either of these occur, consultan Authorized Mazda Dealer as soon aspossible. The system may not work in anaccident.
WARNINGNever tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs:Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious injury or death.
qAir Bag/Front Seat BeltPretensioner System Warning Beep
If a malfunction is detected in the air bag/front seat belt pretensioner systems andthe warning light, a warning beep soundwill be heard for about 5 seconds everyminute.
The air bag and seat belt pretensionersystem warning beep sound will continueto be heard for approximately 35 minutes.Have your vehicle inspected at anAuthorized Mazda Dealer as soon aspossible.
WARNINGDo not drive the vehicle with the airbag/front seat belt pretensioner systemwarning beep sounding:Driving the vehicle with the air bag/front seat belt pretensioner systemwarning beep sounding is dangerous.In a collision, the air bags and thefront seat belt pretensioner system willnot deploy and this could result indeath or serious injury.Contact an Authorized Mazda Dealerto have the vehicle inspected as soonas possible.
Essential Safety Equipment
Seat Belt Systems
2-17
Mazda3_8V66-EA-06F_Edition3 Page31Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (32,1)
Center-Rear Position SeatBelt (3-Point Type)
Before using the center-rear lap/shoulderbelt make sure tongue (A) and anchorbuckle (B) are fastened.
(A)
(B)
qFastening the Seat Belt
1. Grasp the tongue (C).
2. Slowly pull out the lap/shoulder belt.
3. Insert the tongue (C) into the buckle(D) until you hear a click.
(C)
(D) (B)
(A)
WARNINGFastening the Center-Rear Seat Beltwith Only One Buckle:Fastening the center-rear seat beltwith only one buckle is dangerous. Ifonly one pair of seat belt tongue andbuckle, either tongue (A) and anchorbuckle (B) or tongue (C) and anchorbuckle (D), is fastened, the seat beltcannot provide full protection. In asudden stop or collision, the usercould slide under the belt and sufferserious injuries. Always make surethat both pairs of seat belt tongues andbuckles are fastened properly.
Positioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.
4. Position the lap belt as low as possible,not on the abdominal area, then adjustthe shoulder belt so that it fits snuglyagainst your body.
2-18
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page32Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (33,1)
WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.
qUnfastening the Seat Belt
Depress the button on the buckle. If thebelt does not fully retract, pull it out andcheck for kinks or twists. Then make sureit remains untwisted as it retracts.
Button
NOTE
If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer.
qUnfastening the Lap Portion ofthe Seat Belt
Insert a small object such as a key in theanchor buckle (B) slot.
(A)
(B)
CAUTIONAlways unfasten the lap portion of thebelt before folding the left-rearseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.
NOTE
To encourage rear seat passengers towear their seat belts, we suggest leavingthe center-rear lap position of the beltfastened at all times except whenfolding the rear seat forward.
Essential Safety Equipment
Seat Belt Systems
2-19
Mazda3_8V66-EA-06F_Edition3 Page33Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (34,1)
qFastening the Lap Portion of theSeat Belt
Grasp tongue (A) and insert it into theanchor buckle (B) until you hear a click. Itis now secure for passenger use.
NOTE
After returning the left-rear seatback toits upright position, fasten the lapportion of the belt.
qStowing and pulling out theCenter-Rear Position Seat Belt
The center-rear position seat belt can bestowed using the following procedure.
CAUTIONWhen stowing the seat belt, make surethe belt is locked securely into therecess. If the seat belt is not properlystowed, it might get caught in the seatsand be damaged.
To stow the seat belt, retract the belt, puttongues (A) and (C) together and insertthem into the recess.
Sedan (Behind head restraint on leftside)
(A) (C)
Hatchback (Left side of luggagecompartment)
(A)
(C)
To pull out the seat belt, slide tongueswith your finger, and slowly pull out theseat belt from the recess.
NOTE
Pulling out the seat belt all the way outwill switch it to automatic lockingmode. If automatic locking mode is notneeded, retract the seat belt fully toconvert it back to emergency lockingmode.
2-20
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page34Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (35,1)
Seat Belt ExtenderIf your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and forthe particular vehicle and seat. Even if itplugs into other seat belts, it may not holdin the critical moment of a crash.When ordering an extender, only orderone that provides the necessary additionallength to fasten the seat belt properly.Please contact your Authorized MazdaDealer for more information.
WARNINGDo not use a seat belt extender unlessit is necessary:Using a seat belt extender when notnecessary is dangerous. The seat beltwill be too long and not fit properly. Inan accident, the seat belt will notprovide adequate protection and youcould be seriously injured. Only usethe extender when it is required tofasten the seat belt properly.
Do not use an improper extender:Using a seat belt extender that is foranother person or a different vehicleor seat is dangerous. The seat belt willnot provide adequate protection andthe user could be seriously injured inan accident. Only use the extenderprovided for you and for the particularvehicle and seat. NEVER use theextender in a different vehicle or seat.
WARNINGDo not use an extender that is toolong:Using an extender that is too long isdangerous. The seat belt will not fitproperly. In an accident, the seat beltwill not provide adequate protectionand you could be seriously injured. Donot use the extender or choose oneshorter in length if the distancebetween the extender's buckle and thecenter of the user's body is less than15cm (6 in).
NOTE
When not in use, remove the seat beltextender and store it in the vehicle. Ifthe seat belt extender is left connected,the seat belt extender might getdamaged as it will not retract with therest of the seat belt and can easily fallout of the door when not in use and bedamaged. In addition, the seat beltwarning light will not illuminate andfunction properly.
Essential Safety Equipment
Seat Belt Systems
2-21
Mazda3_8V66-EA-06F_Edition3 Page35Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (36,1)
Seat Belt Warning Light/Beep
The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.
Conditions of operation
Condition Result
The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.
The warning lightflashes and a beepsound will be heardfor about 6 seconds.
The driver's seat belt isfastened while the warninglight and the beep sound areactivated.
The warning lightturns off and the beepsound stops.
The driver's seat belt isfastened before the ignitionswitch is turned to the ONposition.
The warning light willnot illuminate and thebeep sound will not beheard.
qBelt Minder
NOTE
The belt minder can be deactivated.Consult an Authorized Mazda Dealer todeactivate and restore the seat beltminder.
Driver seated/Front passenger notseated
The belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, the warning light/beepoperates to give you further remindersaccording to the chart below.
Condition
Vehicle speed
Between 0― 20km/h
(0 ― 12 mph)
20 km/h(12 mph) or
more
Seat belt
Indicator
Beep
: Fastened: Unfastened: Illuminated: Flashing: Beep
Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.
2-22
Essential Safety Equipment
Seat Belt Systems
Mazda3_8V66-EA-06F_Edition3 Page36Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (37,1)
Driver seated/Front passenger seated
The seat belt warning function remindsthe front passenger to fasten the seat beltaccording to the chart below.
Condition
Vehicle speed
Between 0― 20km/h
(0 ― 12 mph)
20 km/h(12 mph) or
more
Seat belt(Driver)
Seat belt(Passenger)
Indicator
Beep
: Fastened: Unfastened: Illuminated: Flashing: Beep
Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.
NOTE
l To allow the front passenger seatweight sensor to function properly,do not place and sit on an additionalseat cushion on the front passengerseat. The sensor may not functionproperly because the additional seatcushion could cause sensorinterference.
l Placing packages, luggage, pets orother items on the front passengerseat may cause the front passengerseat belt warning function to operatedepending on the weight of the item.
Essential Safety Equipment
Seat Belt Systems
2-23
Mazda3_8V66-EA-06F_Edition3 Page37Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (38,1)
Child Restraint PrecautionsMazda strongly urges the use of child-restraint systems for children small enough to usethem.
You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirements regarding the safetyof children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the ageand size of the child, obey the law and follow the instructions that come with the individualchild-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer tothe center of the vehicle in the outboard seats, and towards the buckle on the right if thechild is seated on the center seat.
Statistics confirm that the rear seat is the best place for all children up to 12 years of age,and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the airbag system activated. The front passenger's seat is also the least preferred seat for otherchild-restraint systems.
To reduce the chance of injuries caused by deployment of the front passenger air bag, thefront passenger seat weight sensors work as a part of the supplemental restraint system.This system deactivates the front passenger front and side air bags and also the frontpassenger seat belt pretensioner system when the total seated weight on the front passengerseat is less than approximately 30 kg (66 lb).
When an infant or small child sits on the front passenger seat, the system shuts off the frontpassenger front and side air bags and seat belt pretensioner system, so make sure the frontpassenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children beproperly restrained and child-restraint systems of all kinds are properly secured on the rearseats which are the best place for children.
For more details, refer to “Front passenger seat weight sensors” (page 2-49).
2-24
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page38Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (39,1)
WARNINGUse the correct size child-restraint system:For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained using a seat belt or child-restraint system depending on age andsize. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint systembuckled down:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make sureany child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions. When not in use, remove it from the vehicle orfasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCHchild-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:Holding a child in your arms while the vehicle is moving is extremely dangerous. Nomatter how strong the person may be, he or she cannot hold onto a child in a suddenstop or collision and it could result in serious injury or death to the child or otheroccupants. Even in a moderate accident, the child may be exposed to air bag forcesthat could result in serious injury or death to the child, or the child may be slammedinto an adult, causing injury to both child and adult.
Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:Rear-facing child-restraint systems on the front seat are particularly dangerous eventhough you may feel assured that a front passenger air bag will not deploy based onthe fact that the front passenger air bag deactivation indicator light illuminates.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child.
Essential Safety Equipment
Child Restraint
2-25
Mazda3_8V66-EA-06F_Edition3 Page39Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (40,1)
WARNINGSeating a child in a child-restraint system on the front passenger seat is dangerous:Vehicles equipped with front passenger seat weight sensors are also equipped with afront passenger air bag deactivation indicator light (page 2-33). Even with the frontpassenger seat weight sensors, if you must use the front passenger seat for children,seating a child in a child-restraint system on the front passenger seat under thefollowing conditions increases the danger of the front passenger air bag deployingand could result in serious injury or death to the child.l The total seated weight of the child with the child-restraint system on the frontpassenger seat is approximately 30 kg (66 lb) or more with a child in the child-restraint system.
l Luggage or other items are placed on the seat with the child in the child-restraintsystem.
l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger puts their feet on the front seat rails.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.
l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories, which might increase the total seated weight on the frontpassenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places forchildren. Always use seat belts and child restraints.
Do not allow a child to lean over or against the side window of a vehicle with side andcurtain air bags:It is dangerous to allow anyone to lean over or against the side window, the area ofthe front passenger seat, the front and rear window pillars and the roof edge alongboth sides from which the side and curtain air bags deploy, even if a child-restraintsystem is used. If the vehicle is equipped with side and curtain air bags, the impact ofinflation could cause serious injury or death to the child. Furthermore, leaning overor against the front door could block the side and curtain air bags and eliminate theadvantages of supplemental protection. With the front air bag and the additional sideair bag that comes out of the front seat, the rear seat is always a better location forchildren. Do not allow a child to lean over or against the side window, even if the childis seated in a child-restraint system.
2-26
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page40Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (41,1)
WARNINGNever use one seat belt on more than one person at a time:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way cannot spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.
CAUTIONA seat belt or child-restraint system can become very hot in a closed vehicle duringwarm weather. To avoid burning yourself or a child, check them before you or your childtouches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of speciallydesigned LATCH child-restraint systems in the rear seat. When using these anchors tosecure a child-restraint system, refer to “LATCH Child-Restraint Systems” (page 2-36).
Essential Safety Equipment
Child Restraint
2-27
Mazda3_8V66-EA-06F_Edition3 Page41Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (42,1)
Installing Child-RestraintSystems
Accident statistics reveal that a child issafer in the rear seat. The front passenger'sseat is clearly the worst choice for anychild under 12, and with rear-facing child-restraint systems it is clearly unsafe due toair bags.
Some child-restraint systems now comewith tethers and therefore must beinstalled on the seats that take tethers tobe effective. In your Mazda, tetheredchild-restraint systems can only beaccommodated in the three positions onthe rear seat.
Even if your vehicle is equipped withfront passenger seat weight sensors (page2-49), which automatically deactivates thefront passenger air bag, a rear seat is thesafest place for a child of any age or size.
Some child-restraint systems also employspecially designed LATCH attachments;refer to “LATCH Child-RestraintSystems” (page 2-36).
WARNINGTethered Child-Restraint SystemsWork Only on Tether-Equipped RearSeats:Installation of a tether equipped child-restraint system in the frontpassenger's seat defeats the safetydesign of the system and will result inan increased chance of serious injuryif the child-restraint system goesforward without benefit of beingtethered.Place tether equipped child-restraintsystems where there are tetheranchors.
qRear Seat Child-Restraint SystemInstallation
Follow these instructions when using achild-restraint system, unless you areattaching a LATCH-equipped child-restraint system to the rear LATCH loweranchors. Refer to “LATCH Child-Restraint Systems” (page 2-36).
NOTE
Follow the child-restraint systemmanufacturer's instructions carefully. Ifyou are not sure whether you have aLATCH system or tether, check in thechild-restraint system manufacturer'sinstructions and follow themaccordingly. Depending on the type ofchild-restraint system, it may notemploy seat belts which are inautomatic locking mode.
2-28
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page42Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (43,1)
1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.
2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.
3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.
4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in theautomatic locking mode. If the beltdoes not lock the seat down tight,repeat this step.
NOTE
Inspect this function before each use ofthe child-restraint system. You shouldnot be able to pull the shoulder belt outof the retractor while the system is inthe automatic locking mode. When youremove the child-restraint system, besure the belt fully retracts to return thesystem to emergency locking modebefore occupants use the seat belts.
5. If your child-restraint system requiresthe use of a tether strap, refer to themanufacturer's instructions to hook andtighten the tether strap after raising thehead restraint (except center position).
Essential Safety Equipment
Child Restraint
2-29
Mazda3_8V66-EA-06F_Edition3 Page43Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (44,1)
Anchor bracket location (4 Door)
Anchor bracket
Tether strap position (4 Door)
Anchor bracket
Tether strap
Anchor bracket location (5 Dooroutboard position)
Tether strap position (5 Door outboardposition)
Forward
Tether strap
Anchor bracket location (5 Door centerposition)
Tether strap position (5 Door centerposition)
Tether strap
2-30
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page44Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (45,1)
WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury.
Always route the tether strap betweenthe head restraint and the seatback(Except center position):Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slide offthe head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.
Always attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.
qIf You Must Use the Front Seatfor Children
If you cannot put all children in the rearseat, at least put the smallest children inthe rear and be sure the largest child upfront uses the shoulder belt over theshoulder.NEVER put a rear-facing child-restraintsystem on the front passenger seat, evenwith a seat weight sensor equippedvehicle.This seat is also not set up for tetheredchild-restraint systems, put them in one ofthe rear seat positions set up with tetheranchors.Likewise the LATCH child-restraintsystem cannot be secured in the frontpassenger's seat and should be used in therear seat.Don't allow anyone to sleep against theside window if you have an optional sideand curtain air bag, it could cause seriousinjuries to an out of position occupant. Aschildren more often sleep in cars, it isbetter to put them in the rear seat. Ifinstalling the child-restraint system on thefront seat is unavoidable, follow theseinstructions when using a front-facingchild-restraint system in the frontpassenger's seat.
Essential Safety Equipment
Child Restraint
2-31
Mazda3_8V66-EA-06F_Edition3 Page45Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (46,1)
NOTE
l To check if your front seats have sideair bags:Mazda vehicles equipped with sideair bag will have a “SRS AIRBAG”tag on the outboard shoulder of thefront seats.
l To check if your vehicle has curtainair bags:Mazda vehicles equipped withcurtain air bag will have an “SRSAIRBAG” marking on the front andrear window pillars along the roofedge.
WARNINGAlways move the front passenger seatas far back as possible if installing afront-facing child-restraint system onit is unavoidable:As your vehicle has front air bags anddoubly so if your vehicle has side airbags, a front-facing child-restraintsystem should be put on the frontpassenger seat only when it isunavoidable.Even if the front passenger air bagdeactivation indicator lightilluminates, always move the seat asfar back as possible, because the forceof a deploying air bag could causeserious injury or death to the child.
WARNINGNever use a rear-facing child-restraintsystem in the front seat with an air bagthat could deploy:Rear-facing child-restraint systems onthe front seat are particularlydangerous.Even in a moderate collision, thechild-restraint system can be hit by adeploying air bag and moved violentlybackward resulting in serious injuryor death to the child. Even though youmay feel assured that the frontpassenger air bag will not deploybased on the fact that the frontpassenger air bag deactivationindicator light illuminates.
2-32
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page46Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (47,1)
WARNINGDo not allow a child to lean over oragainst the side window of a vehiclewith side and curtain air bags:It is dangerous to allow anyone to leanover or against the side window, thearea of the front passenger seat, thefront and rear window pillars and theroof edge along both sides from whichthe side and curtain air bags deploy,even if a child-restraint system is used.If the vehicle is equipped with side andcurtain air bags, the impact ofinflation could cause serious injury ordeath to the child. Furthermore,leaning over or against the front doorcould block the side and curtain airbags and eliminate the advantages ofsupplemental protection. With thefront air bag and the additional sideair bag that comes out of the frontseat, the rear seat is always a betterlocation for children. Do not allow achild to lean over or against the sidewindow, even if the child is seated in achild-restraint system.
qFront Passenger's Seat Child-Restraint System Installation
1. Slide the seat as far back as possible.
2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.
3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.
4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in automaticlocking mode. If the belt does not lockthe seat down tight, repeat the previousstep and also this one.
Essential Safety Equipment
Child Restraint
2-33
Mazda3_8V66-EA-06F_Edition3 Page47Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (48,1)
NOTE
l Inspect this function before each useof the child-restraint system. Youshould not be able to pull theshoulder belt out of the retractorwhile the system is in the automaticlocking mode. When you remove thechild-restraint system, be sure thebelt fully retracts to return the systemto emergency locking mode beforeoccupants use the seat belts.
l Follow the child-restraint systemmanufacturer's instructions carefully.Depending on the type of child-restraint system, it may not employseat belts which are in automaticlocking mode.
5. Make sure the front passenger air bagdeactivation indicator light illuminatesafter installing a child-restraint systemon the front passenger seat.Refer to Front passenger air bagdeactivation indicator light on page2-49.
With seat warmer
Without seat warmer
2-34
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page48Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (49,1)
WARNINGDo not seat a child in a child-restraintsystem on the front passenger seat ifthe front passenger air bagdeactivation indicator light does notilluminated:While it is always better to install anychild-restraint system on the rear seat,it is imperative that a child-restraintsystem ONLY be used on the frontpassenger seat if the deactivationindicator light illuminates when thechild is seated in the child-restraintsystem (page 2-49). Seating a child ina child-restraint system installed onthe front passenger seat with the frontpassenger air bag deactivationindicator light not illuminated isdangerous. If this indicator light doesnot illuminate even when the totalseated weight is less thanapproximately 30 kg (66 lb), thismeans that the front passenger frontand side air bags, and seat beltpretensioner are ready for deployment.If an accident were to deploy an airbag, a child in a child-restraint systemsitting in the front passenger seatcould be seriously injured or killed. Ifthe indicator light does not illuminateafter seating a child in a child-restraint system on the front passengerseat, seat a child in a child-restraintsystem on the rear seat and consult anAuthorized Mazda Dealer as soon aspossible.
Essential Safety Equipment
Child Restraint
2-35
Mazda3_8V66-EA-06F_Edition3 Page49Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (50,1)
LATCH Child-Restraint SystemsYour Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise theseat will bounce around and put the child in danger. Most LATCH child-restraint systemsmust also be used in conjunction with a tether to be effective. If they have a tether youmust use it to better assure your child's safety.
WARNINGFollow the manufacturer's instructions for the use of the child-restraint system:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make surethe child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions.
Never attach two child-restraint systems to the same LATCH lower anchor:Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.In a collision, one anchor may not be strong enough to hold two child-restraint systemattachments, and it may break, causing serious injury or death. If you use the seatposition for another child-restraint system when an outboard LATCH position isoccupied, use the center seat belts instead, and the tether if tether-equipped.
Make sure the child-restraint system is properly secured:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Follow thechild-restraint system manufacturer's instructions on belt routing to secure the seatjust as you would with a child in it so that nobody is tempted to put a child in animproperly secured seat later on. When not in use, remove it from the vehicle or fastenit with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems.
Make sure there are no seat belts or foreign objects near or around the LATCH child-restraint system:Not following the child-restraint system manufacturer's instructions when installingthe child-restraint system is dangerous. If seat belts or a foreign object prevent thechild-restraint system from being securely attached to the LATCH lower anchors andthe child-restraint system is installed improperly, the child-restraint system could movein a sudden stop or collision causing serious injury or death to the child or otheroccupants. When installing the child-restraint system, make sure there are no seatbelts or foreign objects near or around the LATCH lower anchors. Always follow thechild-restraint system manufacturer's instructions.
2-36
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page50Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (51,1)
qChild-Restraint System InstallationProcedure (Rear Outboard Seats)
1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.
2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.
NOTE
The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.
3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instruction.
4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety. Pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.
Anchor bracket location (4 Door)
Anchor bracket
Tether strap position (4 Door)
Anchor bracket
Tether strap
Anchor bracket location (5 Door)
Essential Safety Equipment
Child Restraint
2-37
Mazda3_8V66-EA-06F_Edition3 Page51Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (52,1)
Tether strap position (5 Door)
Forward
Tether strap
WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury.
Always route the tether strap betweenthe head restraint and the seatback:Routing the tether strap on top of thehead restraint is dangerous. In acollision the tether strap could slide offthe head restraint and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild.
WARNINGAlways attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.
qChild-Restraint System InstallationProcedure (Rear Center Seat)
The LATCH lower anchors at the centerof the rear seat are much further apart thanthe sets of LATCH lower anchors forchild-restraint system installation at otherseating positions. Child-restraint systemswith rigid LATCH attachments cannot beinstalled on the center seating position.Some LATCH equipped child-restraintsystems can be placed in the centerposition and will reach the nearestLATCH lower anchors which are 400 mm(15.75 in) apart. LATCH compatiblechild-restraint systems (with attachmentson belt webbing) can be used at thisseating position only if the child-restraintsystem manufacturer's instructions statethat the child-restraint system can beinstalled to LATCH lower anchors that are400 mm (15.75 in) apart. Do not attachtwo child-restraint systems to the sameLATCH lower anchor. If your child-restraint system has a tether, it must alsobe used for your child's optimum safety.
1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.
2-38
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page52Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (53,1)
2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.
NOTE
The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.
3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instructions.
4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety. Pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.
Anchor bracket location (4 Door)
Anchor bracket
Tether strap position (4 Door)
Anchor bracket
Tether strap
Anchor bracket location (5 Door)
Essential Safety Equipment
Child Restraint
2-39
Mazda3_8V66-EA-06F_Edition3 Page53Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (54,1)
Tether strap position (5 Door)
Tether strap
WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury.
Always attach the tether strap to thecorrect tether anchor position:Attaching the tether strap to theincorrect tether anchor position isdangerous. In a collision, the tetherstrap could come off and loosen thechild-restraint system. If the child-restraint system moves it could resultin death or injury to the child.
2-40
Essential Safety Equipment
Child Restraint
Mazda3_8V66-EA-06F_Edition3 Page54Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (55,1)
Supplemental Restraint Systems (SRS) PrecautionsThe front and side supplemental restraint systems (SRS) include up to 6 air bags (verify“SRS AIRBAG” location indicator marks).They are located in:
l The steering wheel hub (driver air bag)
l The front passenger dashboard (front passenger air bag)
l The outboard sides of the front seatbacks (side air bags)í
l The front and rear window pillars, and the roof edge along both sides (curtain air bags)í
These systems operate independently depending on the type of accident encountered; ifyou have side and curtain air bags, the side and curtain air bags are not likely to deploy onboth sides in the same accident because a vehicle is not often hit from both sides. The sideand curtain air bags and the frontal air bag system will not normally deploy during thesame type of accident unless a combination of frontal and side impacts occur.
The air bag supplemental restraint systems are designed to provide supplemental protectiononly in the front seats in certain situations and the rear outside passenger positions only insame-side collisions, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.Seat belt usage is necessary to:
l Keep the occupant from being thrown into an inflating air bag.
l Reduce the possibility of injuries during an accident that is not designed for air baginflation, such as roll-over or rear impact.
l Reduce the possibility of injuries in frontal or side collisions that are not severe enoughto activate the air bags.
l Reduce the possibility of being thrown from your vehicle.
l Reduce the possibility of injuries to lower body and legs during an accident because theair bags provide no protection to these parts of the body.
l Hold the driver in a position which allows better control of the vehicle.
Small children must be protected by a child-restraint system as stipulated by law in everystate and province. In certain states and provinces, larger children must use a child-restraintsystem (page 2-24).Carefully consider which child-restraint system is necessary for your child and follow theinstallation directions in this Owner's Manual as well as the child-restraint systemmanufacturer's instructions.
Essential Safety Equipment
SRS Air Bags
2-41íSome models.
Mazda3_8V66-EA-06F_Edition3 Page55Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (56,1)
WARNINGSeat belts must be worn in air bag equipped vehicles:Depending only on the air bags for protection during an accident is dangerous. Alone,air bags may not prevent serious injuries. The appropriate air bags can be expected toinflate only in the first collision with frontal, near frontal or side forces that are atleast moderate. Vehicle occupants should always wear seat belts.
Children should not ride in the front passenger seat:Placing a child, 12 years or under, in the front seat is dangerous. The child could behit by a deploying air bag and be seriously injured or even killed. Even if the frontpassenger air bag deactivation indicator light illuminates, always move the frontpassenger seat as far back as possible. A sleeping child is more likely to lean againstthe door and be hit by the side air bag in a moderate, right-side collision. Wheneverpossible, always secure a child 12 years and under on the rear seat with anappropriate child-restraint system for the child's age and size.
Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:Rear-facing child-restraint systems on the front seat are particularly dangerous eventhough you may feel assured that a front passenger air bag will not deploy based onthe fact that the front passenger air bag deactivation indicator light illuminates.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child.
Do not sit too close to the driver and front passenger air bags:Sitting too close to the driver and front passenger air bag modules or placing hands orfeet on them is extremely dangerous. The driver and front passenger air bags inflatewith great force and speed. Serious injuries could occur if someone is too close. Thedriver should always hold onto only the rim of the steering wheel. The front seatpassenger should keep both feet on the floor. Front seat occupants should adjust theirseats as far back as possible and always sit upright against the seatbacks with seatbelts worn properly.
2-42
Essential Safety Equipment
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page56Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (57,1)
WARNINGSit in the center of the seat and wear seat belts properly:Sitting too close to the side air bag modules or placing hands on them is extremelydangerous. The side air bags inflate with great force and speed directly out of theoutboard side of the front seat and expand along the front door on the side the car ishit. Serious injury could occur if someone is sitting too close to the door or leaningagainst a window, or if rear seat occupants grab the sides of the front seatbacks.Furthermore, sleeping up against the door or hanging out the windows in the vehiclecould block the side and curtain air bags and eliminate the advantages ofsupplemental protection. Give the side and curtain air bags room to work by sitting inthe center of the seat while the vehicle is moving with seat belts worn properly.
Do not attach objects on or around the area where driver and front passenger air bagsdeploy:Attaching an object to the driver and front passenger air bag modules or placingsomething in front of them is dangerous. In an accident, an object could interfere withair bag inflation and injure the occupants.
Do not attach objects on or around the area where a side air bag deploys:Attaching things to the front seat in such a way as to cover the outboard side of theseat in any way is dangerous. In an accident the object could interfere with the side airbag, which inflates from the outboard side of the front seats, impeding the addedprotection of the side air bag system or redirecting the air bag in a way that isdangerous. Furthermore, the bag could be cut open releasing the gas.Do not hang net bags, map pouches or backpacks with side straps on the front seats.Never use seat covers on the front seats. Always keep the side air bag modules in yourfront seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:Attaching objects to the areas where the curtain air bag activates such as on thewindshield glass, side door glass, front and rear window pillars and along the roofedge and assist grips is dangerous. In an accident the object could interfere with thecurtain air bag, which inflates from the front and rear window pillars and along theroof edge, impeding the added protection of the curtain air bag system or redirectingthe air bag in a way that is dangerous. Furthermore, the bag could be cut openreleasing the gas.Do not place hangers or any other objects on the assist grips. When hanging clothes,hang them on the coat hook directly. Always keep the curtain air bag modules free todeploy in the event of a side collision.
Essential Safety Equipment
SRS Air Bags
2-43
Mazda3_8V66-EA-06F_Edition3 Page57Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (58,1)
WARNINGDo not place luggage or other objects under the front seats:Placing luggage or other objects under the front seats is dangerous. The componentsessential to the supplemental restraint system could be damaged, and in the event of aside collision, the appropriate air bags may not deploy, which could result in death orserious injury. To prevent damage to the components essential to the supplementalrestraint system, do not place luggage or other objects under the front seats.
Do not touch the components of the supplemental restraint system after the air bagshave inflated:Touching the components of the supplemental restraint system after the air bags haveinflated is dangerous. Immediately after inflation, they are very hot. You could getburned.
Never install any front-end equipment to your vehicle:Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bullbar, push bar, or other similar devices), snowplow, or winches, is dangerous. The airbag crash sensor system could be affected. This could cause air bags to inflateunexpectedly, or it could prevent the air bags from inflating during an accident. Frontoccupants could be seriously injured.
Do not modify the suspension:Modifying the vehicle suspension is dangerous. If the vehicle's height or thesuspension is modified, the vehicle will be unable to accurately detect a collisionresulting in incorrect or unexpected air bag deployment and the possibility of seriousinjuries.
Do not modify the supplemental restraint system:Modifying the components or wiring of the supplemental restraint system isdangerous. You could accidentally activate it or make it inoperable. Do not make anymodifications to the supplemental restraint system. This includes installing trim,badges, or anything else over the air bag modules. It also includes installing extraelectrical equipment on or near system components or wiring. An Authorized MazdaDealer can provide the special care needed in the removal and installation of frontseats. It is important to protect the air bag wiring and connections to assure that thebags do not accidentally deploy, the driver seat slide position sensor and frontpassenger seat weight sensors are not damaged and that the seats retain anundamaged air bag connection.
2-44
Essential Safety Equipment
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page58Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (59,1)
NOTE
l When an air bag deploys, a loud inflation noise can be heard and some smoke will bereleased. Neither is likely to cause injury, however, the texture of the air bags maycause light skin injuries on body parts not covered with clothing through friction.
l Should you sell your Mazda, we urge you to tell the new owner of its air bag systemsand that familiarization with all instructions about them, from the Owner's Manual, isimportant.
Essential Safety Equipment
SRS Air Bags
2-45
Mazda3_8V66-EA-06F_Edition3 Page59Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (60,1)
Supplemental Restraint System ComponentsThe supplemental restraint systems (SRS) have two basic subsystems:
l The air bag system with inflators and air bags.
l The electrical system with crash sensors and diagnostic module.
The air bags are mounted in the following locations:
l The steering wheel hub
l The front passenger dashboard
l The outboard sides of the front seatbacksí
l The front and rear window pillars, and the roof edge along both sidesí
The air bags are out of sight until activated.
2-46
Essential Safety Equipment
íSome models.
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page60Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (61,1)
qFront Air Bag System Components
(1)
(6)
(10)
(7)
(6)
(9) (5)
(4)
(3)(2)
(8)
(1) Driver seat slide position sensor (page 2-49)(2) Front seats(3) Front dual stage inflators and air bags(4) Front air bag sensor(5) Front passenger air bag deactivation indicator light (page 2-49)(6) Front seat belt pretensioner and load limiting systems (page 2-15)(7) Front passenger seat weight sensors (page 2-49)(8) Front passenger seat weight sensor control module(9) Crash sensors and diagnostic module (SAS unit)(10) Driver and front passenger seat belt buckle switches (page 2-49)
Essential Safety Equipment
SRS Air Bags
2-47
Mazda3_8V66-EA-06F_Edition3 Page61Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (62,1)
qSide and Curtain Air Bag System Componentsí
4 Door
5 Door
(4)
(1) (1)
(3)
(2)
(3)(4)
(1) (1)(2)
(1) Side and curtain inflators and air bags(2) Front seats(3) Crash sensors and diagnostic module (SAS unit)(4) Side crash sensor
2-48
Essential Safety Equipment
íSome models.
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page62Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (63,1)
How the Air Bags Work
qHow the Front Air Bags Work
When air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly deflate.The front air bags will function only once. After that, the front air bags will not workagain and must be replaced.Only an Authorized Mazda Dealer can replace the system components.
The front, dual stage air bags control air bag inflation in two energy stages. During animpact of moderate severity the front air bags deploy with lesser energy, whereas duringmore severe impacts, they deploy with more energy. Deployment of the front air bags maydiffer between the driver and the front passenger depending on the driver seat position,front passenger weight and front seat belt usage, all of which provide data from each sensorto the air bag system.
The front air bags will deploy only in a frontal or frontal offset impact.
Driver seat slide position sensor
Your vehicle is equipped with a driver seat slide position sensor as a part of thesupplemental restraint system. The sensor is located under the driver seat. The sensordetermines whether the driver seat is fore or aft of a reference position and sends the seatposition to the diagnostic module (SAS unit). The sensor is also designed to control thedeployment of the driver air bag depending on how close the driver seat is to the steeringwheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has apossible malfunction (page 2-57).
Essential Safety Equipment
SRS Air Bags
2-49
Mazda3_8V66-EA-06F_Edition3 Page63Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (64,1)
Front passenger seat weight sensors
Vehicles equipped with front passenger seat weight sensors are also equipped with a frontpassenger air bag deactivation indicator light is also equipped (page 2-33). These sensorsare located under both of the front passenger seat rails. These sensors determine the totalseated weight on the front passenger seat. The sensors are also designed to prevent thefront passenger front and side air bags and seat belt pretensioner system from deploying ifthe total seated weight is less than approximately 30 kg (66 lb).
To reduce the chance of injuries caused by deployment of the front passenger air bag, thesystem deactivates the front passenger front and side air bags and also the seat beltpretensioner system when:
l There is no passenger in the front passenger seat. (The front passenger air bagdeactivation indicator light does not illuminate.)
l The total seated weight on the front passenger seat is less than approximately 30 kg (66lb). (The front passenger air bag deactivation indicator light illuminates.)
This system shuts off the front passenger front and side air bags and seat belt pretensionersystem, so make sure the front passenger air bag deactivation indicator light illuminatesaccording to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the frontpassenger air bag deactivation indicator light illuminates if the sensors have a possiblemalfunction. If this happens, the front passenger front and side air bags and seat beltpretensioner system will not deploy.
Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side airbags and seat belt pretensioner will not deploy during a collision.
With seat warmerWithout seat warmer
If the front passenger weight sensors are working properly, the indicator light illuminateswhen the ignition switch is turned to the ON position. After about 6 seconds it goes out.
2-50
Essential Safety Equipment
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page64Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (65,1)
The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:
Total seated weight on thefront passenger seat
Front passenger air bagdeactivation indicator light
Front passenger front andside air bags
Front passenger seatbelt pretensioner
system
Empty (Not occupied)* OFF OFF OFF
Less than approx. 30 kg(66 lb)
ON OFF OFF
Approx. 42 kg (93 lb) ormore
OFF ON ON
* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,however this does not indicate a malfunction.
If the front passenger air bag deactivation indicator light does not illuminate when theignition switch is turned to the ON position and does not illuminate as indicated in theabove chart, do not allow a child to sit in the front passenger seat and consult anAuthorized Mazda Dealer as soon as possible. The system may not work properly in anaccident.
WARNINGDo not decrease the total seated weight on the passenger seat:When an adult or large child sits on the front passenger seat, decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) required for air bag deployment is dangerous. The frontpassenger seat weight sensors will detect the reduced total seated weight condition andthe front passenger front and side air bags and seat belt pretensioner system will notdeploy during an accident. The front passenger will not have the supplementaryprotection of the air bag, which could result in serious injury. Decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) could result in an air bag not deploying under thefollowing conditions, for example:l A rear passenger pushes up on the front passenger seat with the feet.l Luggage or other items placed under the front passenger seat or between the frontpassenger seat and driver seat that push up the front passenger seat bottom.
l The front passenger seat occupant sits in a manner that does not place the entireweight of the occupant on the seat such as by sitting too close to the door, graspingthe rim of the moonroof and sitting with the seatback reclined too far.
l Any accessories which might decrease the total seated weight on the frontpassenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)and they will reactivate before the weight exceeds 42 kg (93 lb).
Essential Safety Equipment
SRS Air Bags
2-51
Mazda3_8V66-EA-06F_Edition3 Page65Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (66,1)
WARNINGDo not increase the total seated weight on the passenger seat:When an infant or small child sits on the front passenger seat, increasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 30 kg (66 lb) is dangerous. The front passenger seat weight sensors willdetect the increased total seated weight, which could result in the unexpecteddeployment of the front passenger front and side air bags and seat belt pretensionersystem in an accident and may cause serious injury. Increasing the total seated weighton the front passenger seat beyond the total seated weight of approximately 30 kg (66lb) could result in the front passenger front and side air bags and seat beltpretensioner system deployment in an accident under the following conditions, forexample:l Luggage or other items are placed on the seat with the child in the child-restraintsystem.
l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger steps on the front passenger seat rails with the feet.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.
l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories which might increase the total seated weight on the front passengerseat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is less thanapproximately 30 kg (66 lb) and they will reactivate when the weight exceedsapproximately 42 kg (93 lb).
2-52
Essential Safety Equipment
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page66Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (67,1)
CAUTIONl To assure proper deployment of the front air bag and to prevent damage to the sensorsin the front seat bottoms:
l Do not place sharp objects on the front seat bottoms or leave heavy luggage onthem.
l Do not spill any liquids on the front seats or under the front seats.
l To allow the sensors to function properly, always perform the following:
l Adjust the front seats as far back as possible and always sit upright against theseatbacks with seat belts worn properly.
l If you place your child on the front passenger seat, secure the child-restraint systemproperly and slide the front passenger seat as far back as possible (page 2-33).
NOTE
l The system requires about 10 seconds to alternate between turning the front passengerfront and side air bags and seat belt pretensioner system on or off.
l The front passenger air bag deactivation indicator light may illuminate repeatedly ifluggage or other items are put on the front passenger seat, or if the temperature of thevehicle's interior changes suddenly.
l The front passenger air bag deactivation indicator light may illuminate for 10 secondsif the total seated weight on the front passenger seat changes.
l If the front passenger air bag deactivation indicator light does not illuminate afterinstalling a child-restraint system on the front passenger seat, install the child-restraintsystem on the rear seat and consult an Authorized Mazda Dealer as soon as possible.
Driver and front passenger buckle switches
The buckle switches on the front seat belts detect whether or not the front seat belts aresecurely fastened and further control the deployment of the air bags.
Essential Safety Equipment
SRS Air Bags
2-53
Mazda3_8V66-EA-06F_Edition3 Page67Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (68,1)
qHow the Side and Curtain Air Bags Workí
When air bag crash sensors detect a side impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the side and curtain air bags and after the inflation, the sideand curtain air bags quickly deflate. However, the side bag system for the front passengeris designed to only deploy in accordance with the total seated weight on the front passengerseat.The side and curtain air bags will function only once. After that, the side and curtain airbags will not work again and must be replaced. Only an Authorized Mazda Dealer canreplace the systems.
The side and curtain air bags will deploy only on the side the vehicle receives the force of the impact.
qAir Bag Activation/Deactivation
NOTE
If the front passenger seat weight sensors detect a total seated weight on the frontpassenger seat is less than approximately 42 kg (93 lb), the front passenger front and sideair bags and seat belt pretensioner may not deploy (page 2-49), but the curtain air bagsmay deploy.
2-54
Essential Safety Equipment
íSome models.
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page68Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (69,1)
Front air bag activation
The front air bags will inflate if theseverity of impact is above the designedthreshold level.
l Hitting a solid wall straight on atgreater than about 22 km/h (14 mph).
l Hitting a curb, pavement edge or hardobject.
l Landing hard or the vehicle falling.
l Frontal impact within about a 30degree range from head-on to thevehicle.
l Driving into a big hole or hitting the farside of a hole.
Limitations to front air bag activation
Depending on the severity of impact, thefront air bags may not inflate in thefollowing cases:
l Impacts involving trees or poles causesevere cosmetic damage but may nothave enough stopping force to activatethe air bag.
l Frontal offset impact to the vehiclemay not provide the stopping forcenecessary for air bag deployment.
Essential Safety Equipment
SRS Air Bags
2-55
Mazda3_8V66-EA-06F_Edition3 Page69Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (70,1)
l Rear-ending or running under a truck'stail gate may not provide the stoppingforce necessary for air bag deployment.
Non-activation of front air bags
Front air bags will not normally inflate inthe following cases:
l Collision from the rear.
l Impact to the side, but it may deploythe side and curtain air bags.
l Vehicle roll-over, may deploy the sideand curtain air bags but not the front airbags.
Side and curtain air bag activationí
The severity of impact above the designedthreshold level to one side of the vehicle(driver or passenger side areas) will causethe side and curtain air bags on that sideto inflate, but it will not normally deploythe front air bags.
Limitations to side and curtain air bagactivationí
Depending on the severity of impact, theside and curtain air bags may not inflate inthe following cases:
l Frontal offset impact may not provideenough side impact to deploy the sideand curtain air bags.
l Side impacts involving trees or polescan cause severe cosmetic damage butmay not have enough impact force toactivate the side and curtain air bags.
2-56
Essential Safety Equipment
íSome models.
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page70Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (71,1)
l Vehicle roll-over may not provideenough side force to deploy the sideand curtain air bags.
l Side impacts with two-wheeledvehicles may not provide enough forceto deploy the side and curtain air bags.
Non-activation of side and curtain airbagí
The side and curtain air bags will notnormally inflate in the following cases:
l Collision from the rear.
l Collision from the front, but it maydeploy the front air bags.
qConstant Monitoring
The following components of the air bagsystems are monitored by a diagnosticsystem:
l SAS unit
l Front air bag sensor
l Air bag modules
l Side crash sensorsí
l Front seat belt pretensioners
l Related wiring
l Driver seat slide position sensor
l Front passenger seat weight sensors
l Driver and front passenger seat beltbuckle switches
The diagnostic module continuouslymonitors the system's readiness. Thisbegins when the ignition switch is turnedto the ON position and continues whilethe vehicle is being driven.
qAir Bag/Front Seat BeltPretensioner System Warning Light
If the air bag/front seat belt pretensionersystem is working properly, the warninglight illuminates when the ignition switchis turned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.
Essential Safety Equipment
SRS Air Bags
2-57íSome models.
Mazda3_8V66-EA-06F_Edition3 Page71Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (72,1)
A system malfunction is indicated if thewarning light constantly illuminates ordoes not illuminate at all when theignition switch is turned to the ONposition. If either of these occur, consultan Authorized Mazda Dealer as soon aspossible. The system may not work in anaccident.
WARNINGNever tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs:Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious injury or death.
qAir Bag/Front Seat BeltPretensioner System Warning Beep
If a malfunction is detected in the air bag/front seat belt pretensioner systems andthe warning light, a warning beep soundwill be heard for about 5 seconds everyminute.
The air bag and seat belt pretensionersystem warning beep sound will continueto be heard for approximately 35 minutes.Have your vehicle inspected at anAuthorized Mazda Dealer as soon aspossible.
WARNINGDo not drive the vehicle with the airbag/front seat belt pretensioner systemwarning beep sounding:Driving the vehicle with the air bag/front seat belt pretensioner systemwarning beep sounding is dangerous.In a collision, the air bags and thefront seat belt pretensioner system willnot deploy and this could result indeath or serious injury.Contact an Authorized Mazda Dealerto have the vehicle inspected as soonas possible.
qMaintenance
The air bag systems do not require regularmaintenance. But if any of the followingoccurs, take your vehicle to an AuthorizedMazda Dealer as soon as possible:
l The air bag system warning lightflashes.
l The air bag system warning lightremains illuminated.
l The air bag system warning light doesnot illuminate when the ignition switchis turned to the ON position.
l The air bag system warning beepsound will be heard.
l The air bags have deployed.
l Front passenger air bag deactivationindicator light does not illuminatewhen the ignition switch is turned tothe ON position or does not illuminateas indicated in the chart. For moredetails about this indicator light andthis chart, refer to “Front passengerseat weight sensors” (page 2-49).
2-58
Essential Safety Equipment
SRS Air Bags
Mazda3_8V66-EA-06F_Edition3 Page72Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (73,1)
WARNINGDo not operate a vehicle with damagedair bag/seat belt pretensioner systemcomponents:Expended or damaged air bag/seatbelt pretensioner system componentsmust be replaced after any collisionwhich caused them to deploy ordamage them. Only a trainedAuthorized Mazda Dealer can fullyevaluate these systems to see that theywill work in any subsequent accident.Driving with an expended or damagedair bag or pretensioner unit will notafford you the necessary protection inthe event of any subsequent accidentwhich could result in serious injury ordeath.
Do not remove interior air bag parts:Removing any components such as thefront seats, front dashboard, thesteering wheel or parts on the frontand rear window pillars and along theroof edge, containing air bag parts orsensors is dangerous. These partscontain essential air bag components.The air bag could accidentally activateand cause serious injuries. Alwayshave an Authorized Mazda Dealerremove these parts.
Dispose of the air bag properly:Improper disposal of an air bag or avehicle with live air bags in it can beextremely dangerous. Unless all safetyprocedures are followed, injury canresult. Ask an Authorized MazdaDealer how to safely dispose of an airbag or how to scrap an air bagequipped vehicle.
NOTE
If it becomes necessary to have thecomponents or wiring system for thesupplementary restraint systemmodified to accommodate a person withcertain medical conditions inaccordance with a certified physician,contact an Authorized Mazda Dealer,refer to “Customer Assistance (U.S.A.)”(page 9-2).
Essential Safety Equipment
SRS Air Bags
2-59
Mazda3_8V66-EA-06F_Edition3 Page73Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (74,1)
2-60
Mazda3_8V66-EA-06F_Edition3 Page74Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (75,1)
3 Knowing Your Mazda
Explanation of basic operations and controls; opening/closing and adjustmentof various parts.
Doors and Locks ........................................................................... 3-2Keys .......................................................................................... 3-2Keyless Entry Systemí ............................................................ 3-3Door Locks ............................................................................... 3-9Liftgate (5 Door) ..................................................................... 3-12Trunk Lid (4 Door) ................................................................. 3-15Inside Trunk Release Lever (4 Door) ...................................... 3-17Power Windowsí ................................................................... 3-19Fuel-Filler Lid and Cap ........................................................... 3-21Hood ....................................................................................... 3-22Moonroofí ............................................................................. 3-24
Security System ........................................................................... 3-26Immobilizer System ................................................................ 3-26Theft-Deterrent Systemí ........................................................ 3-29
Steering Wheel and Mirrors ...................................................... 3-31Steering Wheel ........................................................................ 3-31Mirrors .................................................................................... 3-31
3-1íSome models.
Mazda3_8V66-EA-06F_Edition3 Page75Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (76,1)
Keys
WARNINGDo not leave the keys in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with powerwindows or other controls, or evenmake the vehicle move.
NOTE
l Refer to Immobilizer System (page3-26) for information regarding keysand engine starting.
l (With theft-deterrent system)Refer to Theft-Deterrent System(page 3-29) for informationregarding keys and the prevention ofvehicle and vehicle contents theft.
The keys operate all locks.Type A
Key code number plate
Retractable type key
Type B
Key code number plate
A code number is stamped on the plateattached to the key set; detach this plateand store it in a safe place (not in thevehicle) for use if you need to make areplacement key.
NOTE
Write down the code number and keepit in a separate safe and convenientplace, but not in the vehicle.If your key is lost, consult yourAuthorized Mazda Dealer and haveyour code number ready.
3-2
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page76Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (77,1)
Key extend/retract method (Retractabletype key)
To extend the key, press the releasebutton.
To retract the key, rotate it into the holderwhile pressing the release button.
Keyless Entry Systemí
This system remotely locks and unlocksthe doors and the liftgate.It can also help you signal for attention.Press the buttons slowly and carefully.
CAUTIONTo avoid damage to the transmitter, donot:
l Drop it.
l Get it wet.
l Disassemble it.
l Expose it to high temperatures onplaces such as the dashboard orhood, under direct sunlight.
Knowing Your Mazda
Doors and Locks
3-3íSome models.
Mazda3_8V66-EA-06F_Edition3 Page77Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (78,1)
NOTE
l The keyless entry system is designedto operate up to about 2.5 m (8 ft)from the center of the vehicle, butthis may vary due to localconditions.
l The system doesn't operate when thekey is in the ignition switch.
l Doors and the liftgate cannot belocked by pressing the lock buttonwhile any other door or the liftgate isopen. Also, the hazard warning lightswill not flash.
l If the transmitter does not operatewhen pressing a button or theoperation range becomes too small,the battery may be dead. To install anew battery, refer to Maintenance(page 3-6).
l Additional transmitters can beobtained at an Authorized MazdaDealer. Up to 3 transmitters can beused with the keyless entry systemper vehicle. Bring all transmitters toan Authorized Mazda Dealer whenadditional transmitters are required.
qTransmitter
Integrated key type
Lock button
Unlock button
Panic button
Operation indicator light
Non-key type
Panic button
Lock button
Unlock button
3-4
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page78Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (79,1)
NOTE
l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.
l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.
The operation indicator light flashes whenthe buttons are pressed.
Lock button
To lock the doors and the liftgate, pressthe lock button and the hazard warninglights will flash once.
To confirm that all doors and the liftgatehave been locked, press the lock buttonagain within 5 seconds. If they are closedand locked, the horn will sound.
NOTE
(Without theft-deterrent system)The hazard warning lights will flashonce to indicate that all doors and theliftgate are locked.(With theft-deterrent system)
l The hazard warning lights will notflash.
l The hazard warning lights only flashwhen the theft deterrent system isarmed or turned off, refer to thetheft-deterrent system (page 3-29).
NOTE
l All doors and the liftgate cannot belocked when any door or the liftgateis open and the key is in the ignitionswitch.
l Confirm that all doors and theliftgate are locked visually or audiblyby use of the double click.
Unlock button
To unlock the driver's door, press theunlock button and the hazard warninglights will flash twice.
To unlock all doors and the liftgate, pressthe unlock button again within 5 seconds.
Knowing Your Mazda
Doors and Locks
3-5
Mazda3_8V66-EA-06F_Edition3 Page79Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (80,1)
NOTE
(Without theft-deterrent system)The hazard warning lights will flashtwice to indicate that all doors and theliftgate are unlocked.(With theft-deterrent system)
l The hazard warning lights will notflash.
l The hazard warning lights only flashwhen the theft deterrent system isarmed or turned off, refer to thetheft-deterrent system (page 3-29).
NOTE
After unlocking with the transmitter, alldoors and the liftgate will automaticallylock if one of the doors or the liftgate isnot opened within about 30 seconds.
Panic button
If you witness from a distance someoneattempting to break into or damage yourvehicle, pressing the panic button willactivate the vehicle's alarm.
NOTE
The panic button will work whetherany door or the liftgate is open orclosed.
Turning on the alarm
Pressing the panic button for 1 second ormore will trigger the alarm for about 2minutes and 30 seconds, and thefollowing will occur:
l The horn sounds intermittently.
l The hazard warning lights flash.
Turning off the alarm
Press any button on the transmitter.
qTransmitter Maintenance
CAUTIONl Make sure the battery is installedwith the correct pole facing upward.Battery leakage could occur if it isnot installed correctly.
l When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Also becareful not to get dirt in thetransmitter as it could be damaged.
l There is the danger of explosion ifthe battery is not correctly replaced.
l Replace only with the same typebattery.
l Integrated key type: CR1620 orequivalent
l Non-key type: CR2025 orequivalent
l Dispose of used batteries accordingto the following instructions.
l Insulate the plus and minusterminals of the battery usingcellophane or equivalent tape.
l Never disassemble.l Never throw the battery into fire
and/or water.l Never deform or crush.
3-6
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page80Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (81,1)
Replacing the transmitter battery
Integrated key type
1. Unfold the key (page 3-2).
2. Insert a small screwdriver into the slotand push the tab to remove the keyfrom the transmitter.
Tab
3. Insert a small screwdriver into the slotand gently pry open the transmitter.
4. Press the portion of the batteryindicated by A and remove the battery.
A
NOTE
If it is difficult to remove the battery bypressing with a finger, use a smallscrewdriver to press out the battery.
5. Put in the new battery (CR1620 orequivalent) with the positive pole ( )facing down.
6. Align the front and back covers andsnap the transmitter shut.
7. Install the key to the transmitter.
Knowing Your Mazda
Doors and Locks
3-7
Mazda3_8V66-EA-06F_Edition3 Page81Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (82,1)
Non-key type
1. Insert a small screwdriver into the slotand gently pry open the transmitter.
Back cover
Slot
2. Press the portion of the batteryindicated by A and remove the battery.
A
3. Install a new battery (CR2025 orequivalent) into the front portion of theholder with the positive pole ( )facing up. Press on the B portion of thebattery to set the battery.
B
Back cover
Front cover
Front of holder
4. Align the front and back covers andsnap the transmitter shut.
qService
If you have a problem with the keylessentry system, consult an AuthorizedMazda Dealer.
If your transmitter is lost or stolen, bringall remaining transmitters to anAuthorized Mazda Dealer as soon aspossible for a replacement and to makethe lost or stolen transmitter inoperative.
CAUTIONRadio equipment like this is governedby laws in the United States.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.
3-8
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page82Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (83,1)
Door Locks
WARNINGAlways take all children and pets withyou or leave a responsible person withthem:Leaving a child or a pet unattended ina parked vehicle is dangerous. In hotweather, temperatures inside a vehiclecan become high enough to causebrain damage or even death.
Do not leave the keys in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with powerwindows or other controls, or evenmake the vehicle move.
Keep all doors locked when driving:Unlocked doors in a moving vehicleare dangerous. Passengers can fall outif a door is accidentally opened andcan more easily be thrown out in anaccident.
WARNINGAlways close all the windows, lock thedoors and take the key with you whenleaving your vehicle unattended:(Except 4 Door)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, whichcould result in death. Also, a vehicleleft unlocked becomes an easy targetfor thieves and intruders.(4 Door)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, or becometrapped by climbing into the trunk,which could result in death. Also, avehicle left unlocked becomes an easytarget for thieves and intruders.
qLocking, Unlocking with Key
The driver's door can be locked/unlockedwith the key.Turn the key toward the front to unlock,toward the back to lock.
Unlock
Lock
Knowing Your Mazda
Doors and Locks
3-9
Mazda3_8V66-EA-06F_Edition3 Page83Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (84,1)
NOTE
If your vehicle is equipped with a frontpassenger door key slot, the door can belocked/unlocked with the key.
qLocking, Unlocking withTransmitterí
The doors can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).
qLocking, Unlocking with Door-Lock Knob
To lock any door from the inside, push thedoor-lock knob.To unlock, pull it out.This does not operate the other doorlocks.
Unlock
Lock
To lock any door with the door-lock knobfrom the outside, push the door-lock knobto the lock position and close the door.This does not operate the other doorlocks.
Door-lock knob (Lock position)
NOTE
When locking the doors this way, becareful not to leave the key inside thevehicle.
qPower Door Locksí
Vehicle lock-out prevention
The vehicle lock-out prevention featureprevents you from locking yourself out ofthe vehicle. With the key in the ignitionswitch, all doors and the liftgate willautomatically unlock if they are lockedusing the power door locks with eitherfront door open.
3-10
Knowing Your Mazda
íSome models.
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page84Wednesday, August 23 2006 11:18 AM
Form No.8V66-EA-06F
Black plate (85,1)
Locking, unlocking with key
All doors and the liftgate lockautomatically when the driver's door islocked with the key. All doors and theliftgate unlock when the driver's door isunlocked and the key is held in the unlockposition for one second or longer.
Unlock
Lock
NOTE
Holding the key in the unlockedposition in the driver's door lock forabout a second unlocks all doors andthe liftgate. To unlock only the driver'sdoor, insert the key into the driver'sdoor lock and turn the key briefly to theunlock position and then immediatelyreturn it to the center position.
Locking, unlocking with door-lockswitch
All doors and the liftgate lockautomatically when LOCK is pushed.They all unlock when the unmarked partof the door-lock switch is pushed.
Unlock
Lock
qRear Door Child Safety Locks
These locks are intended to help preventchildren from accidentally opening therear doors. Use them both whenever achild rides in the vehicle.
If you insert the key and turn the childsafety lock to the lock position beforeclosing that door, the door cannot beopened from the inside.The door can be opened only by liftingthe outside handle.
Lock
Unlock
Knowing Your Mazda
Doors and Locks
3-11
Mazda3_8V66-EA-06F_Edition3 Page85Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (86,1)
Liftgate (5 Door)
WARNINGNever allow a person to ride in theluggage compartment:Allowing a person to ride in theluggage compartment is dangerous.The person in the luggagecompartment could be seriouslyinjured or killed during suddenbraking or a collision.
Do not drive with the liftgate open:Exhaust gas in the cabin of a vehicleis dangerous. An open liftgate in amoving vehicle will cause exhaust gasto be drawn into the cabin. This gascontains CO (carbon monoxide),which is colorless, odorless, andhighly poisonous, and it can causeloss of consciousness and death.Moreover, an open liftgate could causeoccupants to fall out in an accident.
qLocking, Unlocking with Key
The liftgate can be locked/unlocked byinserting the key into the driver's door keyslot, refer to Power Door Locks (page3-10).
qLocking, Unlocking with Transmitter
The liftgate can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).
qLocking, Unlocking with Door-Lock Switch
The liftgate can be locked/unlocked byoperating the door-lock switch, refer toPower Door Locks (page 3-10).
qOpening and Closing the Liftgate
Opening the liftgate
Pull the handle and lift up the liftgate.
3-12
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page86Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (87,1)
NOTE
If the vehicle battery is dead or there isa malfunction in the electrical systemand the liftgate cannot be unlocked,perform the following procedure as anemergency measure to unlock it:
1. Remove the cap on the interiorsurface of the liftgate with a flatheadscrewdriver.
Cap
2. Turn the lever to the right to unlockthe liftgate.
Lever
After performing this emergencymeasure, have the vehicle inspected atan Authorized Mazda Dealer as soon aspossible.
Closing the liftgate
Use both hands to push the liftgate downuntil the lock snaps shut. Do not slam it.Pull up on the liftgate to make sure it issecurely latched.
qLuggage Compartment
WARNINGDo not place anything on top of thecover:Placing luggage or other cargo on topof the luggage compartment cover isdangerous. During sudden braking ora collision, the cargo could become aprojectile that could hit and injuresomeone. The vehicle has a lightweight luggage compartment cover tokeep the contents of your luggage areaout of sight; it will not retain heavyobjects that are not tied down in anaccident such as a rollover. Tie downall heavy objects, whether luggage orcargo, using the tie down hooks.
Make sure luggage and cargo issecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.
CAUTIONMake sure the luggage compartmentcover is firmly secured. If it is notfirmly secured, it could unexpectedlydisengage resulting in injury.
Knowing Your Mazda
Doors and Locks
3-13
Mazda3_8V66-EA-06F_Edition3 Page87Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (88,1)
Luggage compartment cover strap
The luggage compartment can beaccessed by opening the liftgate when thestraps are attached to the sides of theliftgate.
Strap
Luggage compartment cover
The luggage compartment can beaccessed by opening the luggagecompartment cover from the inside of thevehicle.
Latch
Latch
CAUTIONTo prevent cargo from shifting whiledriving or during sudden deceleration,be careful of the following:
l Do not open the luggagecompartment cover while the vehicleis moving.
l Do not overload the luggagecompartment so that the covercannot be closed.
l Do not allow cargo to interfere withthe luggage compartment coverlatch.
This cover can be removed for moreroom. To do this, just unfasten the straps;then lift and pull it out.
3-14
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page88Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (89,1)
Trunk Lid (4 Door)
WARNINGNever allow a person to ride in thetrunk:Allowing a person to ride in the trunkis dangerous. In addition, the personin the trunk could be seriously injuredor killed during sudden braking or acollision.
Keep the trunk closed when driving:Exhaust gas entering the cabin of avehicle through an open trunk isdangerous. This gas contains CO(carbon monoxide), which is colorless,odorless, and highly poisonous. Ifinhaled, it can cause loss ofconsciousness and death.
qOpening and Closing the Trunk Lid
WARNINGClose the trunk lid, lock the rearseatbacks and do not allow children toplay inside the vehicle:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure.
Always keep the car from being atempting place to play by locking rearseats, doors and the trunk, andkeeping the keys where children cannot play with them:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andchildren who lock themselves in carsor trunks can die very quickly fromheat prostration. Do not leave yourchildren or pets alone in a car at anytime. Do not leave the car, the rearfolding seats or the trunk unlocked.
CAUTIONFor vehicles equipped with a rearspoiler, do not lift the trunk lid by thespoiler. Lifting up the trunk lid by therear spoiler could cause damage to therear spoiler and the trunk lid.
Knowing Your Mazda
Doors and Locks
3-15
Mazda3_8V66-EA-06F_Edition3 Page89Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (90,1)
Opening the trunk lid with the key
Insert the key into the slot and turn itclockwise.
Open
Opening the trunk lid with the remoterelease lever
Pull up the release lever next to thedriver's seat.
Release lever
Closing the trunk lid
Use both hands to push the trunk lid downuntil the lock snaps shut. Do not slam it.Pull up on the trunk lid to make sure it issecure.
qTrunk Security
In some situations you may want toprevent the trunk from being opened withthe remote trunk lid release lever.
Give your key only to someone you trust.
To secure the trunk lid, lock the rearseatbacks (page 2-8), push the trunk locklever up, and close the trunk.
To cancel the security feature, insert thekey into the lock, turn the key clockwise,and pull the trunk lock lever down.
Unlock
Lock
Trunk lock lever
qTrunk Light
The trunk light is on when the lid is openand off when it's closed.
3-16
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page90Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (91,1)
NOTE
To prevent the battery from beingdischarged, do not leave the trunk openfor a long period when the engine is notrunning.
Inside Trunk ReleaseLever (4 Door)
Your vehicle is equipped with an insidetrunk release handle that provides a meansof escape for children and adults in theevent they become locked inside thetrunk.
No matter how careful adults might bewith keys and locking their cars, parentsshould be aware that children may betempted to play around vehicles and usethe trunk as a hiding place.
Adults are advised to familiarizethemselves with the operation andlocation of the inside release handle sothat all children can be told about it in anappropriate way, keeping in mind thatmost vehicles don't have such handles.
Knowing Your Mazda
Doors and Locks
3-17
Mazda3_8V66-EA-06F_Edition3 Page91Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (92,1)
WARNINGClose the trunk lid, lock the rearseatbacks and do not allow children toplay inside the vehicle:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure.
Always keep the car from being atempting place to play by locking rearseats, doors and the trunk, andkeeping the keys where children cannot play with them:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andchildren who lock themselves in carsor trunks can die very quickly fromheat prostration. Do not leave yourchildren or pets alone in a car at anytime. Do not leave the car, the rearfolding seats or the trunk unlocked.
qOpening the Trunk Lid from theInside
Slide the inside trunk release lever in thedirection of the arrow. The lever is madeof material that will glow for hours in thedarkness of the trunk following a briefexposure to ambient light.
The inside trunk release lever is locatedon the inside of the trunk lid.
3-18
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page92Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (93,1)
Power Windowsí
The ignition switch must be in the ONposition for the power windows tooperate.
WARNINGMake sure the opening is clear beforeclosing a window:Closing power windows aredangerous. A person's hands, head, oreven neck could be caught by thewindow and result in serious injury oreven death.This warning applies especially tochildren.
Always lock all passenger powerwindows with the power window lockswitch on the driver's side whilechildren are in the vehicle, and neverallow children to play with powerwindow switches:Leaving the power window switchesunlocked while children are in thevehicle is dangerous. Power windowswitches that are not locked with thepower window lock switch would allowchildren to operate power windowsunintentionally which could result inserious injury if a child's hands, heador neck becomes caught by thewindow.
CAUTIONTo prevent burning out the fuse anddamaging the power window system,do not open or close more than threewindows at once.
qOperating the Driver's SidePower Window
Manual opening/closing
To open the window to the desiredposition, lightly hold down the switch.To close the window to the desiredposition, lightly pull up the switch.
Open
CloseDriver's window
Auto-opening
To fully open the window automatically,press the switch completely down.
To stop the window partway, lightly pullup the switch and then release it.
Knowing Your Mazda
Doors and Locks
3-19íSome models.
Mazda3_8V66-EA-06F_Edition3 Page93Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (94,1)
qOperating the Passenger PowerWindows
The power windows may be operatedwhen the power window lock switch onthe driver's door is in the unlockedposition.
The passenger windows may be opened orclosed by the power window mastercontrol switches on the driver's door.
Left rear window
Power window lock switch
Front passenger's window
Right rear window
To open the window to the desiredposition, hold down the switch.To close the window to the desiredposition, pull up the switch.
Close
Open
qPower Window Lock Switch
With the lock switch in the unlockedposition, all power windows on each doorcan be operated.
With the lock switch in the lockedposition, only the driver's side powerwindow can be operated.
Locked position
Unlocked position
WARNINGUnless a passenger needs to operate apower window, keep the power windowlock switch in the locked position:Unintentional power windowoperation is dangerous. A person'shands, head, or neck could be caughtby the window and result in seriousinjury.
3-20
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page94Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (95,1)
Fuel-Filler Lid and Cap
WARNINGWhen removing the fuel cap, loosenthe cap slightly and wait for anyhissing to stop. Then remove it:Fuel spray is dangerous. Fuel canburn skin and eyes and cause illness ifingested. Fuel spray is released whenthere is pressure in the fuel tank andthe fuel cap is removed too quickly.
Before refueling, stop the engine, andalways keep sparks and flames awayfrom the filler neck:Fuel vapor is dangerous. It could beignited by sparks or flames causingserious burns and injuries.Additionally, use of the incorrect fuelfiller cap or not using a fuel filler capmay result in fuel leak, which couldresult in serious burns or death in anaccident.
CAUTIONAlways use only a genuine Mazda fuelcap or an approved equivalent,available at an Authorized MazdaDealer. The wrong cap can result in aserious malfunction of the fuel andemission control systems. It may alsocause the check engine light in theinstrument cluster to illuminate.
qFuel-Filler Lid
To open, pull up the remote fuel-filler lidrelease.4 Door
Remote fuel-filler lid release
5 Door
Remote fuel-filler lid release
Knowing Your Mazda
Doors and Locks
3-21
Mazda3_8V66-EA-06F_Edition3 Page95Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (96,1)
qFuel-Filler Cap
To remove the filler cap, turn itcounterclockwise.
To close the filler cap, turn it clockwiseuntil it clicks.
Open
Close
CAUTIONMake sure the fuel-filler cap istightened securely. The check enginelight may illuminate when the cap isn'ttightened securely. If the light remainson (even after you have tightened thecap securely, driven, and restarted theengine several times), it may indicate adifferent problem. Contact anAuthorized Mazda Dealer as soon aspossible.
Hood
WARNINGAlways check that the hood is closedand securely locked:A hood that is not closed and securelylocked is dangerous as it could flyopen while the vehicle is moving andblock the driver's vision which couldresult in a serious accident.
qOpening the Hood
1. With the vehicle parked, pull therelease handle to unlock the hood.
2. Slide the hood latch and lift the hood.
Type A
3-22
Knowing Your Mazda
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page96Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (97,1)
Type B
3. Grasp the support rod in the paddedarea indicated by the arrow.
Clip
Support rod
Pad
4. Secure the support rod in the stay holeindicated by the arrow to hold the hoodopen.
Without turbocharger
With turbocharger
qClosing the Hood
1. Check under the hood area to makecertain all filler caps are in place andall loose items (e.g. tools, oilcontainers, etc.) have been removed.
2. Insert the support rod in its clip whileholding up the hood. Verify that thesupport rod is secured in the clip beforeclosing the hood.
3. Close the hood so that it locks securely.
Knowing Your Mazda
Doors and Locks
3-23
Mazda3_8V66-EA-06F_Edition3 Page97Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (98,1)
Moonroofí
The moonroof can be opened or closedelectrically only when the ignition switchis in the ON position.
Tilt switch
Slide switch
WARNINGDo not let passengers stand up orextend part of the body through theopen moonroof while the vehicle ismoving:Extending the head, arms, or otherparts of the body through themoonroof is dangerous. The head orarms could hit something while thevehicle is moving. This could causeserious injury or death.
Make sure the opening is clear beforeclosing the moonroof:A closing moonroof is dangerous. Thehands, head, or even neck of a person―especially a child― could be caughtin it as it closes, causing serious injuryor even death.
NOTE
After washing your Mazda or after itrains, wipe the water off the moonroofbefore operating it to avoid waterpenetration which could cause rust andwater damage to your headliner.
qTilt Operation
The rear of the moonroof can be tiltedopen to provide more ventilation.
To fully tilt automatically, momentarilypush the rear of the tilt switch.To stop tilting partway, push any part ofthe tilt or slide switch.
To close to the desired position, push thefront of the tilt or slide switch.
Close
Tilt up
Close
qSlide Operation
To fully open automatically, momentarilypush the rear of the slide switch.To stop sliding partway, push any part ofthe tilt or slide switch.
3-24
Knowing Your Mazda
íSome models.
Doors and Locks
Mazda3_8V66-EA-06F_Edition3 Page98Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (99,1)
To close to the desired position, push thefront of the tilt or slide switch.
CloseClose
Open
qSunshade
The sunshade can be opened and closedby hand.
The sunshade opens automatically whenthe moonroof is opened, but must beclosed by hand.
Sunshade
CAUTIONThe sunshade does not tilt. To avoiddamaging the sunshade, do not push upon it.
Knowing Your Mazda
Doors and Locks
3-25
Mazda3_8V66-EA-06F_Edition3 Page99Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (100,1)
Immobilizer SystemThe immobilizer system allows the engineto start only with a key the systemrecognizes.
If someone attempts to start the enginewith an unrecognized key, the engine willnot start, thereby helping to prevent thetheft of your vehicle.
CAUTIONl Radio equipment like this isgoverned by laws in the UnitedStates.Changes or modifications notexpressly approved by the partyresponsible for compliance couldvoid the user's authority to operatethe equipment.
l To avoid damage to the key, do not:
l Drop the key.l Get the key wet.l Expose the key to any kind of
magnetic field.l Expose the key to high
temperatures on places such as thedashboard or hood, under directsunlight.
CAUTIONWhen starting the engine do not allowthe following, as the engine may notstart due to the electronic signal fromthe ignition key not being transmittedcorrectly.
l A key ring rests on the key grip.
l Metal parts of other keys or metalobjects touch the key grip.
l Spare keys or keys for other vehiclesequipped with an immobilizersystem touch or come near the keygrip.
l Devices for electronic purchases, orsecurity passage touch or come nearthe key.
3-26
Knowing Your Mazda
Security System
Mazda3_8V66-EA-06F_Edition3 Page100Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (101,1)
NOTE
l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.
l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.
qOperation
Arming
The system is armed when the ignitionswitch is turned from the ON to the ACCposition.The security indicator light in theinstrument panel flashes every 2 secondsuntil the system is disarmed.
Disarming
The system is disarmed when the ignitionswitch is turned to the ON position withthe correct ignition key.The security indicator light illuminates forabout 3 seconds and goes out.
If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.
NOTE
l If the security indicator light comeson and stays on when the ignitionswitch is turned to the ON position,the engine will not start.
l Signals from a TVor radio station, orfrom a transceiver or a mobiletelephone, could interfere with yourimmobilizer system. If you are usingthe proper key and your engine failsto start, check the security indicatorlight. If it is flashing, remove theignition key and wait 2 seconds ormore, then reinsert it and try startingthe engine again. If it doesn't startafter 3 or more tries, contact anAuthorized Mazda Dealer.
l If the security indicator light flashescontinuously while you are driving,don't shut off the engine. Go to anAuthorized Mazda Dealer and haveit checked. If you shut off the enginewhile the light is flashing you won'tbe able to restart it.
Knowing Your Mazda
Security System
3-27
Mazda3_8V66-EA-06F_Edition3 Page101Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (102,1)
NOTE
l Since the electronic codes are resetwhen repairing the immobilizersystem, the keys are needed. Bringall the existing keys to an AuthorizedMazda Dealer.
qMaintenance
If you have a problem with theimmobilizer system or the key, consult anAuthorized Mazda Dealer.
NOTE
l The keys carry a unique electroniccode. For this reason, and to assureyour safety, obtaining replacementkey requires some waiting time.They are only available through anAuthorized Mazda Dealer.
l Always keep a spare key, in case oneis lost. If a key is lost, contact anAuthorized Mazda Dealer as soon aspossible.
l If you lose a key, an AuthorizedMazda Dealer will reset theelectronic codes of your remainingkeys and immobilizer system. Bringall the remaining keys to anAuthorized Mazda Dealer to reset.Starting the vehicle with a key thathas not been reset is not possible.
qModification and Add-OnEquipment
Mazda cannot guarantee the immobilizersystem's operation if the system has beenmodified or if any add-on equipment hasbeen installed to it.
CAUTIONTo avoid damage to your vehicle, donot modify the system or install anyadd-on equipment to the immobilizersystem or the vehicle.
3-28
Knowing Your Mazda
Security System
Mazda3_8V66-EA-06F_Edition3 Page102Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (103,1)
Theft-Deterrent Systemí
The theft-deterrent system is designed toprevent your vehicle or its contents frombeing stolen when all doors, hood, andtrunk lid/liftgate are locked.
If forcible entry is attempted, the systemsounds the horn and flashes the hazardwarning lights.
NOTE
l The theft-deterrent system operateswith the key or the keyless entrysystem transmitter.
l The system will not function unlessit is properly armed. To properlysecure the vehicle, always make sureall windows are completely closedand all doors and the trunk lid/liftgate are locked before leaving thevehicle. Remember to take your keyand transmitter.
qOperation
System triggering conditions
The horn sounds intermittently and thehazard warning lights flash for about 3minutes when the system is triggered byany one of the following:
l Forcing open a door, the hood or thetrunk lid/liftgate.
l Unlocking a door with the door lockswitch.
l Opening a door by operating an insidedoor-lock knob.
l Opening the hood by operating thehood release handle.
l Opening the trunk lid by operating thetrunk lid release lever.
If the system is triggered again, the lightsand horn will activate until a door or thetrunk lid is unlocked with the key or withthe transmitter.
qHow to Arm the System
1. Remove the key from the ignitionswitch.
2. Make sure the hood is closed. Closeand lock all doors and the liftgate/trunklid from the outside using the key. Ifyou have the keyless entry system,press the lock button on the transmitter.The hazard warning lights will flashonce to indicate that the system isarmed.
The following method will also arm thetheft-deterrent system:Close the hood and the liftgate/trunklid . Press the area on the door-lockswitch marked “LOCK” once. Close alldoors.
NOTE
Locking the doors with the inside door-lock knob will not arm the system.
qTo Turn off an Armed System
An armed system can be turned off by anyone of the following methods:
l Unlock a door or the trunk lid with thekey.
l Press the unlock button on the keylessentry system transmitter.
l Insert the key into the ignition switchand turn it to the ON position.
Knowing Your Mazda
Security System
3-29íSome models.
Mazda3_8V66-EA-06F_Edition3 Page103Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (104,1)
qTo Stop an Alarm
A triggered alarm can be turned off byany one of the following methods:
l Unlock a door or the trunk lid with thekey.
l Press the unlock button on the keylessentry system transmitter.
NOTE
If you have any problem with the theft-deterrent system, consult an AuthorizedMazda Dealer.
qTheft-Deterrent Labels
A label indicating that your vehicle isequipped with a Theft-Deterrent System isin the glove box.
Mazda recommends that you affix it to thelower rear corner of a front door window.
3-30
Knowing Your Mazda
Security System
Mazda3_8V66-EA-06F_Edition3 Page104Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (105,1)
Steering Wheel
WARNINGNever adjust the steering wheel whilethe vehicle is moving:Adjusting the steering wheel while thevehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident.
qSteering Wheel Adjustment
To change the angle or length of thesteering wheel:
1. Stop the vehicle, pull down the lockrelease lever under the steeringcolumn.
Lock release lever
2. Tilt the steering wheel and/or adjust thesteering column length to the desiredpositions, push the lever up to lock thecolumn.
3. Push the wheel up and down to becertain it's locked before driving.
Mirrors
qOutside Mirrors
Check the mirror angles before driving.
Mirror type
Flat type (driver's side)Flat surface mirror.Convex type (front passenger side)The mirror has single curvature on itssurface.
WARNINGBe sure to look over your shoulderbefore changing lanes:Changing lanes without taking intoaccount the actual distance of thevehicle in the convex mirror isdangerous. You could have a seriousaccident. What you see in the convexmirror is closer than it appears.
Power control mirror
The ignition switch must be in the ACCor ON position.
To adjust:
1. Move the selector switch to the left orright to choose the left or right sidemirror.
Knowing Your Mazda
Steering Wheel and Mirrors
3-31
Mazda3_8V66-EA-06F_Edition3 Page105Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (106,1)
2. Depress the mirror switch in theappropriate direction.
Mirror switch
Outside mirrorSelector switch
After adjusting the mirror, lock the controlby moving the selector switch to themiddle position.
Manual control mirror
To adjust, move the mirror's control lever,just inside the door.
Control lever
Folding the mirror
Fold the outside mirror rearward until it isflush with the vehicle.
WARNINGAlways return the outside mirrors tothe driving position before you startdriving:Driving with the outside mirrorsfolded in is dangerous. Your rear viewwill be restricted, and you could havean accident.
Mirror defrosterí
To turn on the mirror defrosters, turn theignition switch to the ON position andpush the rear window defroster switch(page 5-60).
qRearview Mirror
Rearview mirror adjustment
Before driving, adjust the rearview mirrorto center on the scene through the rearwindow.
3-32
Knowing Your Mazda
íSome models.
Steering Wheel and Mirrors
Mazda3_8V66-EA-06F_Edition3 Page106Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (107,1)
Type A
Type B
Reducing glare from headlights
Adjust the mirror with the day/night leverin the day position.
Push the lever forward for day driving.Pull it back to reduce glare fromheadlights.
Night
Day
Day/Night lever
WARNINGDo not stack cargo or objects higherthan the seatbacks:Cargo stacked higher than theseatbacks is dangerous. It can blockyour view in the rearview mirror,which might cause you to hit anothercar when changing lanes.
Knowing Your Mazda
Steering Wheel and Mirrors
3-33
Mazda3_8V66-EA-06F_Edition3 Page107Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (108,1)
3-34
Mazda3_8V66-EA-06F_Edition3 Page108Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (109,1)
4 Before Driving Your Mazda
Important information about driving your Mazda.
Fuel and Engine Exhaust Precautions ........................................ 4-2Fuel Requirements .................................................................... 4-2Emission Control System .......................................................... 4-4Engine Exhaust (Carbon Monoxide) ......................................... 4-5
Before Starting the Engine ........................................................... 4-6Before Getting In ...................................................................... 4-6After Getting In ......................................................................... 4-6
Driving Tips ................................................................................... 4-7Break-In Period ......................................................................... 4-7Money-Saving Suggestions ...................................................... 4-7Hazardous Driving .................................................................... 4-8Rocking the Vehicle .................................................................. 4-9Winter Driving .......................................................................... 4-9Driving In Flooded Area ......................................................... 4-11Overloading ............................................................................ 4-12Turbocharger Informationí .................................................... 4-13
Towing ......................................................................................... 4-14Trailer Towing ......................................................................... 4-14
4-1íSome models.
Mazda3_8V66-EA-06F_Edition3 Page109Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (110,1)
Fuel RequirementsVehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum.
2.3-liter turbocharger engineYour Mazda will perform best with fuel listed in the table.
Fuel Octane Rating* (Anti-knock index)
Premium unleaded fuel 91 [ (R+M)/2 method] or above (96 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
This vehicle is designed for and requires use of premium unleaded fuel. If 91 octane fuel [(R+M)/2 method] (96RON) is not available, gasoline as low as 87 octane [ (R+M)/2method] (91RON) can be used temporarily for emergency purposes. Use of gasoline lowerthan 91 octane [ (R+M)/2 method] (96RON) can decrease performance during its use.Refueling the vehicle with the correct octane fuel a couple of times will restore vehicleperformance.
Except 2.3-liter turbocharger engineYour Mazda will perform best with fuel listed in the table.
Fuel Octane Rating* (Anti-knock index)
Regular unleaded fuel 87 [ (R+M)/2 method] or above (91 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Fuel with a rating lower than 87 octane (91 RON) could cause the emission control systemto lose effectiveness. It could also cause engine knocking and serious engine damage.
CAUTIONl USE ONLY UNLEADED FUEL.Leaded fuel is harmful to the catalytic converter or the oxygen sensor. The lead willaccumulate on the oxygen sensor and the catalyst inside the converter. This will resultin a malfunction of the emission control system, causing poor performance.
l Your vehicle can only use oxygenated fuels containing no more than 10% ethanol byvolume. Damage to your vehicle may occur when ethanol exceeds thisrecommendation, or if the gasoline contains any methanol. Stop using gasohol of anykind if your vehicle engine is performing poorly.
l Never add fuel system additives. Never add cleaning agents other than those specifiedby Mazda. Other cleaning agents and additives may damage the system. Consult anAuthorized Mazda Dealer.
4-2
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Mazda3_8V66-EA-06F_Edition3 Page110Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (111,1)
Gasoline blended with oxygenates such as alcohol or ether compounds are generallyreferred to as oxygenated fuels. The common gasoline blend that can be used with yourvehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such asethanol or methanol, may be marketed under the name “Gasohol”.
Vehicle damage and drivability problems resulting from the use of the following may notbe covered by the Mazda warranty.
l Gasohol containing more than 10% ethanol.
l Gasoline or gasohol containing methanol.
l Leaded fuel or leaded gasohol.
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
4-3
Mazda3_8V66-EA-06F_Edition3 Page111Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (112,1)
Emission Control SystemYour vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements.
WARNINGNever park over or near anything flammable:Parking over or near anything flammable, such as dry grass, is dangerous. Even withthe engine turned off, the exhaust system remains very hot after normal use and couldignite anything flammable. A resulting fire could cause serious injury or death.
CAUTIONIgnoring the following precautions could cause lead to accumulate on the catalyst insidethe converter or cause the converter to get very hot. Either condition will damage theconverter and cause poor performance.
l USE ONLY UNLEADED FUEL.
l Don't drive your Mazda with any sign of engine malfunction.
l Don't coast with the ignition switch turned off.
l Don't descend steep grades in gear with the ignition switch turned off.
l Don't operate the engine at high idle for more than 2 minutes.
l Don't tamper with the emission control system. All inspections and adjustments mustbe made by a qualified technician.
l Don't push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission controlsystem before the first sale and registration of a vehicle is subject to penalties. In somestates, such modification made on a used vehicle is also subject to penalties.
NOTE
While the engine is off, the sound of a valve opening and closing can be heard at the rearof the right side of the vehicle, however this does not indicate an abnormality. Yourvehicle has a self-checking device and it operates while the engine is off.
4-4
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Mazda3_8V66-EA-06F_Edition3 Page112Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (113,1)
Engine Exhaust (Carbon Monoxide)
WARNINGDo not drive your vehicle if you smell exhaust gas inside the vehicle:Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which iscolorless, odorless, and poisonous. When inhaled, it can cause loss of consciousnessand death. If you smell exhaust gas inside your vehicle, keep all windows fully openand contact an Authorized Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaustgas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss ofconsciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air whenidling the engine:Exhaust gas is dangerous. When your vehicle is stopped with the windows closed andthe engine running for a long time even in an open area, exhaust gas, which containspoisonous carbon monoxide, could enter the cabin. Loss of consciousness or evendeath could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe,before starting the engine:Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaustpipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Becauseexhaust gas contains poisonous carbon monoxide, it could cause loss ofconsciousness or even death to occupants in the cabin.
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
4-5
Mazda3_8V66-EA-06F_Edition3 Page113Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (114,1)
Before Getting Inl Be sure the windows, outside mirrors,and outside lights are clean.
l Inspect inflation pressures andcondition of tires.
l Look under the vehicle for any sign offluid leaks.
l If you plan to back up, make surenothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutchfluid, washer fluid, and other fluidlevels should be inspected. SeeMaintenance, Section 8.
After Getting Inl Are all doors closed and locked?
l Is the seat adjusted properly?
l Are the inside and outside mirrorsadjusted?
l Is everyone's seat belt fastened?
l Check all gauges.
l Check all warning lights when theignition switch is turned to the ONposition.
l Release the parking brake and makesure the brake warning light goes off.
Always be thoroughly familiar with yourMazda.
4-6
Before Driving Your Mazda
Before Starting the Engine
Mazda3_8V66-EA-06F_Edition3 Page114Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (115,1)
Break-In PeriodNo special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda.
l Don't race the engine.
l Don't maintain one constant speed,either slow or fast, for a long period oftime.
l Don't drive constantly at full-throttle orhigh engine rpm for extended periodsof time.
l Avoid unnecessary hard stops.
l Avoid full-throttle starts.
Money-Saving SuggestionsHow you operate your Mazda determineshow far it will travel on a tank of fuel. Usethese suggestions to help save money onfuel and repairs.
l Avoid long warm-ups. Once the engineruns smoothly, begin driving.
l Avoid fast starts.
l Keep the engine tuned. Follow themaintenance schedule (page 8-3) andhave an Authorized Mazda Dealerperform inspections and servicing.
l Use the air conditioner only whennecessary.
l Slow down on rough roads.
l Keep the tires properly inflated.
l Don't carry unnecessary weight.
l Don't rest your foot on the brake pedalwhile driving.
l Keep the wheels in correct alignment.
l Keep windows closed at high speeds.
l Slow down when driving in crosswindsand headwinds.
WARNINGNever stop the engine when goingdown a hill:Stopping the engine when going downa hill is dangerous. This causes theloss of power steering and powerbrake control, and may cause damageto the drivetrain. Any loss of steeringor braking control could cause anaccident.
Before Driving Your Mazda
Driving Tips
4-7
Mazda3_8V66-EA-06F_Edition3 Page115Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (116,1)
Hazardous Driving
WARNINGBe extremely careful if it is necessaryto downshift on slippery surfaces:Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol and an accident.
Do not rely on ABS as a substitute forsafe driving:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident.
When driving on ice or in water, snow,mud, sand, or similar hazards:
l Be cautious and allow extra distancefor braking.
l Avoid sudden braking and suddenmaneuvering.
l If your vehicle is not equipped withABS, brake with the pedal by using alight up-down motion. Do not hold thepedal down constantly.If your vehicle is equipped with ABS,do not pump the brakes. Continue topress down on the brake pedal.Refer to Anti-Lock Brake System(ABS) on page 5-6.
l If you get stuck, select a lower gear andaccelerate slowly. Do not spin the frontwheels.
l For more traction in starting onslippery surfaces such as ice or packedsnow, use sand, rock salt, chains,carpeting, or other nonslip materialunder the front wheels.
NOTE
Use snow chains only on the frontwheels.
4-8
Before Driving Your Mazda
Driving Tips
Mazda3_8V66-EA-06F_Edition3 Page116Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (117,1)
Rocking the Vehicle
WARNINGDo not spin the wheels at more than56 km/h (35 mph), and do not allowanyone to stand behind a wheel whenpushing the vehicle:When the vehicle is stuck, spinningthe wheels at high speed is dangerous.The spinning tire could overheat andexplode. This could cause seriousinjuries.
CAUTIONToo much rocking may cause engineoverheating, transaxle failure, and tiredamage.
If you must rock the vehicle to free it fromsnow, sand or mud, depress theaccelerator slightly and slowly move theshift lever from 1 (D) to R.
Winter Drivingl Carry emergency gear, including tirechains, window scraper, flares, a smallshovel, jumper cables, and a small bagof sand or salt.
Ask an Authorized Mazda Dealer toperform the following precautions:
l Have the proper ratio of antifreeze inthe radiator.Refer to Engine Coolant on page 8-21.
l Inspect the battery and its cables. Coldreduces battery capacity.
l Inspect the ignition system for damageand loose connections.
l Use washer fluid made withantifreeze―but don't use enginecoolant antifreeze for washer fluid(page 8-28).
l Don't use the parking brake in freezingweather as the parking brake mayfreeze. Instead, shift to P with anautomatic transaxle and to 1 or R witha manual transaxle. Block the rearwheels.
Before Driving Your Mazda
Driving Tips
4-9
Mazda3_8V66-EA-06F_Edition3 Page117Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (118,1)
qSnow Tires
Use snow tires on all four wheels
Don't go faster than 120 km/h (75 mph)while driving with snow tires. Inflatesnow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)more than recommended on the tirepressure label (driver's door frame), butnever more than the maximum cold-tirepressure shown on the tires.Your vehicle is originally equipped withall season radials designed to be used allyear around. In some extreme climatesyou may find it necessary to replace themwith snow tires during the winter monthsto further improve traction on snow andice covered roads.
WARNINGUse only the same size and type tires(snow, radial, or non-radial) on allfour wheels:Using tires different in size or type isdangerous. Your vehicle's handlingcould be greatly affected and result inan accident.
CAUTIONCheck local regulations before usingstudded tires.
NOTE
If your vehicle is equipped with the tirepressure monitoring system, the systemmay not function correctly when usingtires with steel wire reinforcement inthe sidewalls (page 5-29).
qTire Chains
Check local regulations before using tirechains.
CAUTIONl Chains may scratch or chipaluminum wheels. Install tire chainson steel wheels only.
l Chains may affect handling.
l Don't go faster than 50 km/h (30mph) or the chain manufacturer'srecommended limit, whichever islower.
l Drive carefully and avoid bumps,holes, and sharp turns.
l Avoid locked-wheel braking.
l Don't use chains on a temporaryspare tire; it may result in damage tothe vehicle and to the tire.
l Don't use chains on roads that arefree of snow or ice. The tires andchains could be damaged.
NOTE
If your vehicle is equipped with the tirepressure monitoring system, the systemmay not function correctly when usingtire chains.
Install the chains on the front tires.Don't use chains on the rear tires.Use only genuine Mazda tire chains.Please consult an Authorized MazdaDealer.
4-10
Before Driving Your Mazda
Driving Tips
Mazda3_8V66-EA-06F_Edition3 Page118Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (119,1)
Installing the chains
1. Secure the chains on the front tires astightly as possible. Always follow thechain manufacturer's instructions.
2. Retighten the chains after driving 1/2―1 km (1/4―1/2 mile).
Driving In Flooded Area
WARNINGDry wet brakes by driving very slowlyand applying the brakes lightly untilbrake performance returns to normal:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.
CAUTIONMake sure water does not enter thevehicle interior or the engine area.Interior materials could get moldy, andmany electronic devices in the cabinand the engine could be damaged.
Before Driving Your Mazda
Driving Tips
4-11
Mazda3_8V66-EA-06F_Edition3 Page119Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (120,1)
Overloading
WARNINGBe careful not to overload yourvehicle:The gross axle weight rating (GAWR)and the gross vehicle weight rating(GVWR) of your vehicle are on theMotor Vehicle Safety Standard Labelon the driver's door frame. Exceedingthese ratings can cause an accident orvehicle damage. You can estimate theweight of your load by weighing theitems (or people) before putting themin the vehicle.
4-12
Before Driving Your Mazda
Driving Tips
Mazda3_8V66-EA-06F_Edition3 Page120Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (121,1)
Turbocharger Informationí
The turbocharger greatly enhances engine power. Its advanced design provides improvedoperation and requires minimum additional maintenance. To get maximum performancefrom your turbocharged engine, take note of the following tips:
l The turbocharged engine is designed for optimal operation with premium unleadedgasoline (page 4-2). Do not use fuel with a lower octane rating. Extra fuel additives areNOT recommended.
l Change the engine oil and filter using the turbo engine interval outlined in themaintenance schedule (for your driving condition).
l Use only the recommended engine oil (page 8-18). Extra oil additives are NOTrecommended.
l After driving at freeway speeds or up a long hill, idle the engine at least 30 seconds tocool the turbo before turning off the engine. Avoid simply shutting the engine offabruptly after a hard or long drive. Damage to the turbocharger may result.
l Don't race or over-rev the engine when starting. This should not be done with ANYengine, especially not with one that's turbocharged.
l Do not add any aftermarket devices to alter the engine's ignition timing, fuel delivery, orturbo boost pressure. This may lead to serious engine damage and may void yourwarranty.
Before Driving Your Mazda
Driving Tips
4-13íSome models.
Mazda3_8V66-EA-06F_Edition3 Page121Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (122,1)
Trailer TowingThe Mazda3 is not designed for towing.Never tow a trailer with your Mazda3.
4-14
Before Driving Your Mazda
Towing
Mazda3_8V66-EA-06F_Edition3 Page122Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (123,1)
5 Driving Your Mazda
Explanation of instruments and controls.
Starting and Driving ..................................................................... 5-2Ignition Switch .......................................................................... 5-2Starting the Engine .................................................................... 5-3Brake System ............................................................................ 5-4Manual Transaxle Operation ..................................................... 5-9Automatic Transaxle Controls ................................................. 5-11Power Steering ........................................................................ 5-18Cruise Controlí ...................................................................... 5-19Traction Control System (TCS)í ........................................... 5-22Dynamic Stability Control (DSC)í ........................................ 5-23Tire Pressure Monitoring Systemí ......................................... 5-25
Instrument Cluster and Indicators ............................................ 5-32Meters and Gauges .................................................................. 5-32
Warning/Indicator Lights and Beep Sounds ............................ 5-37Warning/Indicator Lights ........................................................ 5-37Beep Sounds ........................................................................... 5-49
Switches and Controls ................................................................ 5-51Lighting Control ..................................................................... 5-51Turn and Lane-Change Signals ............................................... 5-54Fog Lightsí ............................................................................ 5-55Windshield Wipers and Washer .............................................. 5-55Rear Window Wiper and Washer (5 Door) ............................. 5-59Rear Window Defroster ........................................................... 5-60Horn ........................................................................................ 5-61Hazard Warning Flasher .......................................................... 5-61
5-1íSome models.
Mazda3_8V66-EA-06F_Edition3 Page123Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (124,1)
Ignition Switch
qIgnition Switch Positions
LOCK
The steering wheel locks to protectagainst theft. Only in this position can thekey be removed.To turn the key from the ACC to theLOCK position, push the button when thekey is at the ACC position, then turn thekey to the LOCK position.
ButtonPush the button
Automatic transaxle
To turn the key from the ACC to theLOCK position, the shift lever must be inthe P position.
Shift lever engaged in P (park)
WARNINGRemove the key only when the vehicleis parked:Removing the key from the ignitionswitch while the vehicle is moving isdangerous. Removing the key allowsthe steering wheel to lock. You willlose steering control and a seriousaccident could occur.
Before leaving the driver's seat,always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle:Leaving the driver's seat withoutsetting the parking brake and the shiftlever is dangerous. Unexpected vehiclemovement could occur. This couldcause an accident.
5-2
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page124Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (125,1)
NOTE
If turning the key is difficult, jiggle thesteering wheel from side to side.
ACC (Accessory)
The steering wheel unlocks and someelectrical accessories will operate.
ON
This is the normal running position afterthe engine is started. The warning lights(except brakes) should be inspectedbefore the engine is started (page 5-37).
NOTE
When the ignition switch is turned tothe ON position, the sound of the fuelpump motor operating near the fueltank can be heard. This does notindicate an abnormality.
START
The engine is started in this position. Itwill crank until you release the key; thenit returns to the ON position. The brakewarning light can be checked after theengine is started (page 5-37).
qIgnition Key Reminder
If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.
Starting the Engine
NOTE
Engine-starting is controlled by thespark ignition system.This system meets all CanadianInterference-Causing EquipmentStandard requirements regulating theimpulse electrical field strength of radionoise.
1. Occupants should fasten their seatbelts.
2. Make sure the parking brake is on.
3. Depress the brake pedal.
4. (Manual transaxle)Depress the clutch pedal all the wayand shift into neutral.Keep the clutch pedal depressed whilecranking the engine.
(Automatic transaxle)Put the vehicle in park (P). If you mustrestart the engine while the vehicle ismoving, shift into neutral (N).
NOTE
(Manual transaxle)The starter will not operate if the clutchpedal is not depressed all the way.
(Automatic transaxle)The starter will not operate if the shiftlever is not in P or N.
5. Turn the ignition switch to the STARTposition and hold (up to 10 seconds ata time) until the engine starts.
Driving Your Mazda
Starting and Driving
5-3
Mazda3_8V66-EA-06F_Edition3 Page125Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (126,1)
CAUTIONDon't try the starter for more than 10seconds at a time. If the engine stalls orfails to start, wait 10 seconds beforetrying again. Otherwise, you maydamage the starter and drain the battery.
6. After starting the engine, let it idle forabout 10 seconds.
NOTE
l In extremely cold weather, below_18 °C (0 °F), or after the vehiclehas not been driven in several days,let the engine warm up withoutoperating the accelerator.
l Whether the engine is cold or warm,it should be started without use ofthe accelerator.
Brake System
qFoot Brake
Your Mazda has power-assisted brakesthat adjust automatically through normaluse.
Should power-assist fail, you can stop byapplying greater force than normal to thebrake pedal. But the distance required tostop will be greater than usual.
WARNINGDo not coast with the engine stalled orturned off, find a safe place to stop:Coasting with the engine stalled orturned off is dangerous. Braking willrequire more effort, and the brake'spower-assist could be depleted if youpump the brake. This will causelonger stopping distances or even anaccident.
Shift to a lower gear when going downsteep hills:Driving with your foot continuouslyon the brake pedal or steadily applyingthe brakes for long distances isdangerous. This causes overheatedbrakes, resulting in longer stoppingdistances or even total brake failure.This could cause loss of vehiclecontrol and a serious accident. Avoidcontinuous application of the brakes.
5-4
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page126Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (127,1)
WARNINGDry brakes that have become wet bydriving very slowly and applying thebrakes lightly until brake performanceis normal:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.
qParking Brake
WARNINGBefore leaving the driver's seat,always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle:Leaving the driver's seat withoutsetting the parking brake and the shiftlever is dangerous. Unexpected vehiclemovement could occur. This couldcause an accident.
CAUTIONDriving with the parking brake on willcause excessive wear of the brakelinings or pads.
NOTE
For parking in snow, refer to WinterDriving (page 4-9) regarding parkingbrake use.
Setting the parking brake
Depress the brake pedal and then firmlypull the parking brake lever fully upwardswith a greater amount of force than isrequired so that the vehicle holds in thestationary position.
Releasing the parking brake
Depress the brake pedal and pull theparking brake lever upwards, then pressthe release button. While holding thebutton, lower the parking brake lever allthe way down to the released position.
Driving Your Mazda
Starting and Driving
5-5
Mazda3_8V66-EA-06F_Edition3 Page127Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (128,1)
qBrake System Warning Light
This warning has the following functions:
Parking brake warning
The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brakeis fully released, you may have a brakeproblem.
Drive to the side of the road and park offthe right-of-way.
You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.
1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-23).
2. After adding fluid, check the lightagain.
If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.
Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.
NOTE
Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.
WARNINGDo not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to have thebrakes inspected as soon as possible:Driving with the brake system warninglight illuminated is dangerous. Itindicates that your brakes may notwork at all or that they couldcompletely fail at any time. If this lightremains illuminated, after checkingthat the parking brake is fullyreleased, have the brakes inspectedimmediately.
qAnti-Lock Brake System (ABS)í
The ABS control unit continuouslymonitors the speed of each wheel. If oneis about to lock up, the ABS responds byautomatically releasing and reapplyingthat wheel's brake.
The driver will feel a slight vibration inthe brake pedal and may hear a chatteringnoise from the brake system. This isnormal when the ABS operates. Don'tpump the brakes, continue to press downon the brake pedal.
5-6
Driving Your Mazda
íSome models.
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page128Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (129,1)
WARNINGDo not rely on ABS as a substitute forsafe driving:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident.
NOTE
Braking distances may be longer onloose surfaces (snow or gravel, forexample) which usually have a hardfoundation. A vehicle with a normalbraking system may require lessdistance to stop under these conditionsbecause the tires will build up a wedgeof surface layer when the wheels skid.
qABS Warning Lightí
The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.
If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.
NOTE
When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.
qElectronic Brake ForceDistribution System Warningí
If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.
Driving Your Mazda
Starting and Driving
5-7íSome models.
Mazda3_8V66-EA-06F_Edition3 Page129Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (130,1)
WARNINGDo not drive with both the ABSwarning light and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe brakes inspected as soon aspossible:Driving when the brake systemwarning light and ABS warning lightare illuminated at the same time isdangerous.When both lights are illuminated, therear wheels could lock more quickly inan emergency stop than under normalcircumstances.
qBrake Assistí
During emergency braking situationswhen it is necessary to depress the brakepedal with greater force, the brake assistsystem provides braking assistance, thusenhancing braking performance.
When the brake pedal is depressed hard ordepressed more quickly, the brakes applymore firmly.
NOTE
l When the brake pedal is depressedhard or depressed more quickly, thepedal will feel softer but the brakeswill apply more firmly. This is anormal effect of the brake assistoperation and does not indicate anabnormality.
l When the brake pedal is depressedhard or depressed more quickly, aclicking noise from the brake boostermay be heard. This is a normal effectof the brake assist and does notindicate an abnormality.
l The brake assist equipment does notsupersede the functionality of thevehicle's main braking system.
5-8
Driving Your Mazda
íSome models.
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page130Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (131,1)
Manual Transaxle Operation
qManual Transaxle Shift Pattern
5-speed transaxle
6-speed transaxleNeutral position
Neutral position
The vehicle is equipped with either a 5-speed or 6-speed manual transaxle. Theshift pattern for each is shown above.
Depress the clutch pedal all the way downwhile shifting; then release it slowly.
(5-speed transaxle)A safety feature prevents accidentalshifting from 5 to R (reverse). The shiftlever must be put in neutral before beingshifted to R.
(6-speed transaxle)Vehicles with 6-speed transaxle areequipped with a device to prevent shiftingto R (reverse) by mistake. Push the shiftlever downward and shift to R.
WARNINGDo not use sudden engine braking onslippery road surfaces or at highspeeds:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident.
Be sure to leave the shift lever in 1 orR position and set the parking brakewhen leaving the vehicle unattended:Otherwise the vehicle could move andcause an accident.
Driving Your Mazda
Starting and Driving
5-9
Mazda3_8V66-EA-06F_Edition3 Page131Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (132,1)
CAUTIONl Keep your foot off the clutch pedalexcept when shifting gears. Also,don't use the clutch to hold thevehicle on an upgrade. Riding theclutch will cause needless clutchwear and damage.
l Make sure the vehicle comes to acomplete stop before shifting to R.Shifting to R while the vehicle is stillmoving may damage the transaxle.
NOTE
If shifting to R is difficult, shift backinto neutral, release the clutch pedal,and try again.
qRecommendations for Shifting
UpshiftingFor normal acceleration, we recommend these shiftpoints.
Gear 5-speed transaxle 6-speed transaxle
1 to 2 21 km/h (13 mph) 24 km/h (15 mph)
2 to 3 39 km/h (24 mph) 40 km/h (25 mph)
3 to 4 55 km/h (34 mph) 65 km/h (40 mph)
4 to 5 79 km/h (49 mph) 73 km/h (45 mph)
5 to 6 ― 81 km/h (50 mph)
For cruising
Gear 5-speed transaxle 6-speed transaxle
1 to 2 18 km/h (11 mph) 24 km/h (15 mph)
2 to 3 29 km/h (18 mph) 40 km/h (25 mph)
3 to 4 47 km/h (29 mph) 65 km/h (40 mph)
4 to 5 68 km/h (42 mph) 73 km/h (45 mph)
5 to 6 ― 81 km/h (50 mph)
Downshifting
When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisreduces the chance of stalling and givesbetter acceleration when you need morespeed.On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.
5-10
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page132Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (133,1)
Automatic Transaxle Controls
Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ON position).
Indicates the shift lever can be shifted freely into any position.
Various Lockouts:
NOTE
This Sport AT has an option that is not included in traditional automatic transaxle -giving the driver the option of selecting each gear instead of leaving it to the transaxle toshift gears. Even if you intend to use the automatic transaxle functions as a traditionalautomatic, you should also be aware that you can inadvertently shift into manual shiftmode and an inappropriate gear may be retained as you change speeds. If you notice theengine speed going higher or hear the engine racing, confirm you have not accidentallyslipped into manual shift mode (page 5-13).
Driving Your Mazda
Starting and Driving
5-11
Mazda3_8V66-EA-06F_Edition3 Page133Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (134,1)
qTransaxle Ranges
The shift lever must be in P or N tooperate the starter.
P (Park)
P locks the transaxle and prevents thefront wheels from rotating.
WARNINGAlways set the shift lever to PAND setthe parking brake:Only setting the shift lever to the Pposition without using the parkingbrake to hold the vehicle is dangerous.If P fails to hold, the vehicle couldmove and cause an accident.
CAUTIONl Shifting into P, N or R while thevehicle is moving can damage yourtransaxle.
l Shifting into a driving gear orreverse when the engine is runningfaster than idle can damage thetransaxle.
R (Reverse)
In position R, the vehicle moves onlybackward. You must be at a complete stopbefore shifting to or from R, except underrare circumstances as explained inRocking the Vehicle (page 4-9).
N (Neutral)
In N, the wheels and transaxle are notlocked. The vehicle will roll freely evenon the slightest incline unless the parkingbrake or brakes are on.
WARNINGIf the engine is running faster thanidle, do not shift from N or P into adriving gear:It's dangerous to shift from N or Pinto a driving gear when the engine isrunning faster than idle. If this isdone, the vehicle could move suddenly,causing an accident or serious injury.
Do not shift into N when driving thevehicle:Shifting into N while driving isdangerous. Engine braking cannot beapplied when decelerating whichcould lead to an accident or seriousinjury.
CAUTIONDo not shift into N when driving thevehicle. Doing so can cause transaxledamage.
NOTE
Apply the parking brake or depress thebrake pedal before moving the shiftlever from N to prevent the vehiclefrom moving unexpectedly.
D (Drive)
D is the normal driving position. From astop, the transaxle will automatically shiftthrough a 4-gear/5-gear* sequence.
* 2.3-liter engine model
5-12
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page134Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (135,1)
M (Manual)
M is the manual shift mode position.Gears can be shifted up or down byoperating the shift lever.Refer to Manual Shift Mode (page 5-13).
qShift-Lock System
The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Move the shift lever.
NOTE
l When the ignition switch is in theACC or LOCK position, the shiftlever cannot be shifted from P.
l To be sure the vehicle is in park, theignition key cannot be removedunless the shift lever is in P.
qShift-Lock Override
If the shift lever won't move from P usingthe proper shift procedure, continue tohold down the pedal.
1. Remove the shift-lock override coverwith a screwdriver.
2. Insert a screwdriver and push it down.
3. Move the shift lever.
4. Take the vehicle to an AuthorizedMazda Dealer to have the systemchecked.
qManual Shift Mode
This mode gives you the feel of driving amanual transaxle vehicle by operating theshift lever and allows you to controlengine rpm and torque to the front wheelsmuch like a manual transaxle when morecontrol is desired.
To change to manual shift mode, shift thelever from D to M.
To return to automatic shift mode, shiftthe lever from M to D.
Driving Your Mazda
Starting and Driving
5-13
Mazda3_8V66-EA-06F_Edition3 Page135Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (136,1)
NOTE
l If you change to manual shift modewhen the vehicle is stopped, the gearwill shift to M1.
l If you shift up once when the vehicleis stopped and the gear is at M1, thegear will shift to M2. M2 is helpfulfor starting on slippery surfaces.
l (2.3-liter engine model)If you change to manual shift modewithout depressing the acceleratorpedal when driving in D range, 5thgear, the gear will shift to M4.
Indicators
Shift position indicator
In manual shift mode, the “M” of the shiftposition indicator in the instrument panelilluminates.
Gear position indicator
The numeral for the selected gearilluminates.
Shift position indicator
Gear position indicator
NOTE
l If the gears cannot be shifted downwhen driving at higher speeds, thegear position indicator will flashtwice to signal that the gears cannotbe shifted down.
l If the automatic transaxle fluid (ATF)temperature becomes too high, thereis the possibility that the transaxlewill switch to automatic shift mode,canceling manual shift mode andturning off the gear position indicatorillumination. This is a normalfunction to protect the AT. After theATF temperature has decreased, thegear position indicator illuminationturns back on and driving in manualshift mode is restored.
Shifting
Manually Shifting up
(M1→M2→M3→M4→M5*)To shift up to a higher gear, tap the shiftlever back ( ) once.
* 2.3-liter engine model
5-14
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page136Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (137,1)
NOTE
l When driving slowly, the gears maynot shift up depending on vehiclespeed.
l In manual shift mode, gears do notshift up automatically. Don't run theengine with the tachometer needle inthe RED ZONE. If the tachometerneedle enters the RED ZONE, youmay feel engine-braking because thefuel delivery will be stopped toprotect the engine. However, thisdoes not indicate an abnormality.
l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.
Manually Shifting down
(M5*→M4→M3→M2→M1)To shift down to a lower gear, tap the shiftlever forward ( ) once.
* 2.3-liter engine model
WARNINGDo not use sudden engine braking onslippery road surfaces or at highspeeds:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident.
Be sure to leave the shift lever in 1 orR position and set the parking brakewhen leaving the vehicle unattended:Otherwise the vehicle could move andcause an accident.
NOTE
l When driving at high speeds, thegear may not shift down dependingon vehicle speed.
l During deceleration, the gear mayautomatically shift down dependingon vehicle speed.
l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.
Second gear fixed mode
When the shift lever is tapped back ( )while the vehicle is stopped or driven atthe following speeds, the transaxle is setin the second gear fixed mode.2.0-liter engine model:14 km/h (8 mph) or less
Driving Your Mazda
Starting and Driving
5-15
Mazda3_8V66-EA-06F_Edition3 Page137Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (138,1)
2.3-liter engine model:20 km/h (12 mph) or less
The gear is fixed in second while in thismode for easier starting and driving onslippery roads. If the shift lever is tappedback ( ) or forward ( ) while in thesecond gear fixed mode, the mode will becanceled.
Shifting specification (2.0-liter enginemodel)
Shifting up
If the vehicle speed is lower than thespeed specified for each gear, the gearcannot be shifted up to a higher gear.
Gear Vehicle speed
M1→M2You can shift up to M2 whetherthe vehicle is stopped or moving.
M2→M3 20 km/h (12 mph)
M3→M4 40 km/h (24 mph)
Shifting down
If the vehicle speed is higher than thespeed specified for each gear, the gearcannot be shifted down to a lower gear.
Gear Vehicle speed
M4→M3 180 km/h (112 mph)
M3→M2 119 km/h (74 mph)
M2→M1 47 km/h (30 mph)
During deceleration, the gears shift downautomatically when speed is reduced tothe following:
Gear Vehicle speed
M4→M3 36 km/h (22 mph)
M3 or M2→M1 12 km/h (7 mph)
NOTE
The gear does not shift down to M1automatically while in the second gearfixed mode.
If the vehicle is kicked down at thefollowing speeds or lower, the gears shiftdown automatically:
Gear Vehicle speed
M4→M3 170 km/h (105 mph)
M3→M2 72 km/h (44 mph)
Shifting specification (2.3-liter enginemodel)
Shifting up
If the vehicle speed is lower than thespeed specified for each gear, the gearcannot be shifted up to a higher gear.
Gear Vehicle speed
M1→M2You can shift up to M2 whetherthe vehicle is stopped ormoving.
M2→M3 20 km/h (12 mph)
M3→M433 km/h (21 mph)
M4→M5
Shifting down
If the vehicle speed is higher than thespeed specified for each gear, the gearcannot be shifted down to a lower gear.
Gear Vehicle speed
M5→M4 191 km/h (118 mph)
M4→M3 137 km/h (85 mph)
M3→M2 89 km/h (55 mph)
M2→M1 44 km/h (27 mph)
During deceleration, the gears shift downautomatically when speed is reduced tothe following:
Gear Vehicle speed
M5 or M4→M3 30 km/h (18 mph)
M3 or M2→M1 10 km/h (6 mph)
5-16
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page138Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (139,1)
NOTE
The gear does not shift down to M1automatically while in the second gearfixed mode.
If the vehicle is kicked down at thefollowing speeds or lower, the gears shiftdown automatically:
Gear Vehicle speed
M5→M4 182 km/h (113 mph)
M4→M3 133 km/h (82 mph)
M3→M2 48 km/h (30 mph)
M2→M1 12 km/h (7 mph)
Recommendations for shifting
Upshifting
For normal acceleration and cruising, werecommend these shift points.(2.0-liter engine model)
Gear Vehicle speed
M1 to M2 24 km/h (15 mph)
M2 to M3 40 km/h (25 mph)
M3 to M4 65 km/h (40 mph)
(2.3-liter engine model)
Gear Vehicle speed
M1 to M2 24 km/h (15 mph)
M2 to M3 40 km/h (25 mph)
M3 to M4 65 km/h (40 mph)
M4 to M5 73 km/h (45 mph)
Downshifting
When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisgives better acceleration when you needmore speed.
On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.
qDriving Tips
Passing
For extra power when passing anothervehicle or climbing steep grades, depressthe accelerator fully. The transaxle willshift to a lower gear, depending on vehiclespeed.
Climbing steep grades from a stop
To climb a steep grade from a stoppedposition:
1. Depress the brake pedal.
2. Shift to D or M1, depending on theload weight and grade steepness.
3. Release the brake pedal whilegradually accelerating.
Descending steep grades
When descending a steep grade, shift tolower gears, depending on load weightand grade steepness. Descend slowly,using the brakes only occasionally toprevent them from overheating.
Driving Your Mazda
Starting and Driving
5-17
Mazda3_8V66-EA-06F_Edition3 Page139Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (140,1)
Power SteeringPower steering is only operable when theengine is running. If the engine is off or ifthe power steering system is inoperable,you can still steer, but it requires morephysical effort.
If the steering feels stiffer than usualduring normal driving, consult anAuthorized Mazda Dealer.
CAUTIONNever hold the steering wheel to theextreme left or right for more than 5seconds with the engine running.This could damage the power steeringsystem.
qPower Steering MalfunctionIndicator Lightí
This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.
If the light stays illuminated after theengine is started or illuminates whiledriving, turn off the engine after parkingin a safe place, and then start the engineagain.If the light does not illuminate afterrestarting the engine, this indicates thatthe power steering is restored and normalsteering is possible.If the light remains illuminated, the powersteering is still inoperable. Consult anAuthorized Mazda Dealer.
NOTE
The power steering system is inoperablewhen the power steering malfunctionindicator light illuminates. Steering ispossible, but requires more physicaleffort.
5-18
Driving Your Mazda
íSome models.
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page140Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (141,1)
Cruise Controlí
With cruise control, you can set andautomatically maintain any speed of morethan about 30 km/h (19 mph).
WARNINGDo not use the cruise control underthe following conditions:Using the cruise control under thefollowing conditions is dangerous andcould result in loss of vehicle control.l Hilly terrainl Steep inclinesl Heavy or unsteady trafficl Slippery or winding roadsl Similar restrictions that requireinconsistent speed
qCruise Main Indicator Light(Amber)/Cruise Set IndicatorLight (Green)
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
The indicator light illuminates amberwhen the ON/OFF switch is pressed andthe cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green whena cruising speed has been set.
qActivation/Deactivation
To activate the system, press the ON/OFFswitch.The cruise main indicator lightilluminates.
To deactivate the system, press the switchagain.The cruise main indicator light turns off.
WARNINGKeep the ON/OFF switch off whencruise control is not in use:Leaving the ON/OFF switch on whennot using the cruise control isdangerous as you may hit one of theother buttons and put the vehicle incruise control unexpectedly. Thiscould result in loss of vehicle control.
qTo Set Speed
1. Activate the cruise control system bypressing the ON/OFF switch.
2. Accelerate to the desired speed, whichmust be more than 30 km/h (19 mph).
Driving Your Mazda
Starting and Driving
5-19íSome models.
Mazda3_8V66-EA-06F_Edition3 Page141Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (142,1)
3. Press the SET/COAST button andrelease it at the speed you want.Release the accelerator at the sametime.
Don't continue to hold in the button. Untilyou release it, speed will continue to drop(unless you continue to accelerate) andyou'll miss the desired speed.
NOTE
l The SET function can't be activateduntil about 2 seconds after the ON/OFF switch has been engaged.
l On a steep grade, the vehicle maymomentarily slow down going up orspeed up while going down.
qTo Increase Cruising Speed
Follow either of these procedures.
l Press the RES/ACCEL button and holdit. Your vehicle will accelerate.Release the button at the speed youwant.
Your vehicle has a tap-up feature thatallows you to increase your current speedin increments of 1.6 km/h (1 mph) by amomentary tap of the RES/ACCELbutton. Multiple taps will increase yourvehicle speed 1.6 km/h (1 mph) for eachtap.
l Accelerate to the desired speed.Press the SET/COAST button andrelease it immediately.
5-20
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page142Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (143,1)
NOTE
Accelerate if you want to speed uptemporarily when the cruise control ison. Greater speed will not interfere withit or change the set speed.Take your foot off the accelerator toreturn to the set speed.
qTo Decrease Cruising Speed
Press the SET/COAST button and hold it.The vehicle will gradually slow.Release the button at the speed you want.
Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of the SET/COASTbutton. Multiple taps will decrease yourvehicle speed 1.6 km/h (1 mph) for eachtap.
qTo Resume Cruising Speed atMore Than 30 km/h (19 mph)
If some other method besides the ON/OFF switch was used to cancel cruisingspeed and the system is still activated, themost recent set speed will automaticallyresume when the RES/ACCEL button ispressed.If vehicle speed is below 30 km/h (19mph), increase the vehicle speed up to 30km/h (19 mph) and press the RES/ACCEL button.
qTo Cancel
To turn off the system, use one of thesemethods:
l Press the ON/OFF switch.
l Slightly depress the brake pedal.
l Depress the clutch pedal (Manualtransaxle only).
Driving Your Mazda
Starting and Driving
5-21
Mazda3_8V66-EA-06F_Edition3 Page143Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (144,1)
l Press the CANCEL button.
The system is off when the ignition is off.
NOTE
Cruise control will cancel at about 15km/h (9 mph) below the preset speed orbelow 25 km/h (16 mph).
Traction Control System(TCS)í
The Traction Control System (TCS)enhances traction and safety bycontrolling engine torque and braking.When the TCS detects driving wheelslippage, it lowers engine torque andoperates the brakes to prevent loss oftraction.
This means that on a slick surface, theengine adjusts automatically to provideoptimum power to the drive wheelswithout causing them to spin and losetraction.
WARNINGDo not rely on the traction controlsystem as a substitute for safe driving:The traction control system (TCS)cannot compensate for unsafe andreckless driving, excessive speed,tailgating (following another vehicletoo closely), and hydroplaning(reduced tire friction and road contactbecause of water on the road surface).You can still have an accident.
Use snow tires or tire chains and driveat reduced speeds when roads arecovered with ice and/or snow:Driving without proper tractiondevices on snow and/or ice-coveredroads is dangerous. The tractioncontrol system (TCS) alone cannotprovide adequate traction and youcould still have an accident.
5-22
Driving Your Mazda
íSome models.
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page144Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (145,1)
NOTE
To turn off the TCS, press the DSCOFF switch (page 5-24).
qTCS/DSC Indicator Light
This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, the indicator light flashes.
If the light stays on, the TCS or DSC mayhave a malfunction and they may notoperate correctly. Take your vehicle to anAuthorized Mazda Dealer.
NOTE
l In addition to the indicator lightflashing, a slight lugging sound willcome from the engine. This indicatesthat the TCS is operating properly.
l On slippery surfaces, such as freshsnow, it will be impossible toachieve high rpm when the TCS ison.
Dynamic Stability Control(DSC)í
The Dynamic Stability Control (DSC)automatically controls braking and enginetorque in conjunction with systems suchas ABS and TCS to help control side slipwhen driving on slippery surfaces, orduring sudden or evasive maneuvering,enhancing vehicle safety.
Refer to ABS (page 5-6) and TCS (page5-22).
DSC operation is possible at speedsgreater than 20 km/h (12 mph).
WARNINGDo not rely on the dynamic stabilitycontrol as a substitute for safe driving:The dynamic stability control (DSC)cannot compensate for unsafe andreckless driving, excessive speed,tailgating (following another vehicletoo closely), and hydroplaning(reduced tire friction and road contactbecause of water on the road surface).You can still have an accident.
Driving Your Mazda
Starting and Driving
5-23íSome models.
Mazda3_8V66-EA-06F_Edition3 Page145Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (146,1)
CAUTIONl The DSC may not operate correctlyunless the following are observed:
l Use tires of the correct sizespecified for your Mazda on allfour wheels.
l Use tires of the samemanufacturer, brand and treadpattern on all four wheels.
l Do not mix worn tires.
l The DSC may not operate correctlywhen tire chains are used or atemporary spare tire is installedbecause the tire diameter changes.
NOTE
After turning the ignition switch to theON position, a clicking sound may beheard behind the dashboard. This soundis the result of the DSC system self-check operation and does not indicatean abnormality.
qTCS/DSC Indicator Light
This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, the indicator light flashes.
If the light stays on, the TCS or DSC mayhave a malfunction and they may notoperate correctly. Take your vehicle to anAuthorized Mazda Dealer.
qDSC OFF Indicator Light
This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position.It also comes on when the DSC OFFswitch is pressed and TCS/DSC isswitched off (page 5-24).
If the light stays on when the TCS/DSC isnot switched off, take your vehicle to anAuthorized Mazda Dealer. The dynamicstability control may have a malfunction.
qDSC OFF Switch
To turn off the TCS/DSC, press and holdthe DSC OFF switch until the DSC OFFindicator light illuminates.
5-24
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page146Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (147,1)
Press the switch again to turn the TCS/DSC back on. The DSC OFF indicatorlight will go out.
NOTE
l When DSC is on and you attempt tofree the vehicle when it is stuck, ordrive it out of freshly fallen snow,the TCS (part of the DSC system)will activate. Depressing theaccelerator will not increase enginepower and freeing the vehicle maybe difficult.When this happens, turn off the TCS/DSC.
l If the TCS/DSC is off when theengine is turned off, it automaticallyactivates when the ignition switch isturned on.
l Leaving the TCS/DSC on willprovide the best stability.
Tire Pressure MonitoringSystemí
The tire pressure monitoring system(TPMS) monitors the pressure for eachtire.If tire pressure is too low in one or moretires, the system will inform the driver viathe warning light in the instrument paneland by the warning beep sound.
The tire pressure sensors installed on eachwheel send tire pressure data by radiosignal to the receiver unit in the vehicle.
Tire pressure sensors
NOTE
When the ambient temperature is lowdue to seasonal changes, tiretemperatures are also lower. If the tiretemperature lowers, the air pressurelowers as well, and the TPMS warninglight illuminates more frequently.Inspect the tire pressure daily beforedriving, and check the tire pressuresmonthly with a tire pressure gauge.When checking the tire pressures, useof a digital tire pressure gauge isrecommended.
Driving Your Mazda
Starting and Driving
5-25íSome models.
Mazda3_8V66-EA-06F_Edition3 Page147Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (148,1)
TPMS does not alleviate your need tocheck the pressure and condition of allfour tires before you drive each day.
CAUTIONl Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pressure recommendedby the vehicle manufacturer on thevehicle placard or tire inflationpressure label. (If your vehicle hastires of a different size than the sizeindicated on the vehicle placard ortire inflation pressure label, youshould determine the proper tireinflation pressure for those tires.)As an added safety feature, yourvehicle has been equipped with a tirepressure monitoring system (TPMS)that illuminates a low tire pressuretelltale when one or more of yourtires is significantly under-inflated.Accordingly, when the low tirepressure telltale illuminates, youshould stop and check your tires assoon as possible, and inflate them tothe proper pressure. Driving on asignificantly under-inflated tirecauses the tire to overheat and canlead to tire failure. Under-inflationalso reduces fuel efficiency and tiretread life, and may affect thevehicle's handling and stoppingability.Please note that the TPMS is not asubstitute for proper tiremaintenance, and it is the driver'sresponsibility to maintain correct tirepressure, even if under-inflation hasnot reached the level to triggerillumination of the TPMS low tirepressure telltale.
CAUTIONl Your vehicle has also been equippedwith a TPMS malfunction indicatorto indicate when the system is notoperating properly.The TPMS malfunction indicator iscombined with the low tire pressuretelltale. When the system detects amalfunction, the telltale will flash forapproximately one minute and thenremain continuously illuminated.This sequence will continue uponsubsequent vehicle start-ups as longas the malfunction exists.When the malfunction indicator isilluminated, the system may not beable to detect or signal low tirepressure as intended. TPMSmalfunctions may occur for a varietyof reasons, including the installationof replacement or alternate tires orwheels on the vehicle that preventthe TPMS from functioningproperly. Always check the TPMSmalfunction telltale after replacingone or more tires or wheels on yourvehicle to ensure that thereplacement or alternate tires andwheels allow the TPMS to continueto function properly.
l To avoid false readings, the systemsamples for a little while beforeindicating a problem. As a result itwill not instantaneously register arapid tire deflation or blow out.
5-26
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page148Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (149,1)
NOTE
This device complies with part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) Thisdevice may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.
qTire Pressure Monitoring SystemWarning Light
This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position.
Thereafter, the warning light illuminateswhen tire pressure is too low in one ormore tires, and flashes when there is asystem malfunction.
WARNINGIf the tire pressure monitoring systemwarning light illuminates or flashes,or the tire pressure warning beepsound is heard, decrease vehicle speedimmediately and avoid suddenmaneuvering and braking:If the tire pressure monitoring systemwarning light illuminates or flashes,or the tire pressure warning beepsound is heard, it is dangerous to drivethe vehicle at high speeds, or performsudden maneuvering or braking.Vehicle drivability could worsen andresult in an accident.To determine if you have a slow leakor a flat, pull over to a safe positionwhere you can check the visualcondition of the tire and determine ifyou have enough air to proceed to aplace where air may be added and thesystem monitored again, anAuthorized Mazda Dealer or a tirerepair station.
Do not ignore the TPMS WarningLight:Ignoring the TPMS warning light isdangerous, even if you know why it isilluminated. Have the problem takencare of as soon as possible before itdevelops into a more serious situationthat could lead to tire failure and adangerous accident.
Warning light illuminates/Warningbeep sounds
When the warning light illuminates, andthe warning beep sound is heard (about 3seconds), tire pressure is too low in one ormore tires.
Driving Your Mazda
Starting and Driving
5-27
Mazda3_8V66-EA-06F_Edition3 Page149Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (150,1)
Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-8).
CAUTIONWhen replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.
NOTE
l Perform tire pressure adjustmentwhen the tires are cold. Tire pressurewill vary according to the tiretemperature, therefore let the vehiclestand for 1 hour or only drive it1.6 km (1 mile) or less beforeadjusting the tire pressures. Whenpressure is adjusted on hot tires tothe cold inflation pressure, the TPMSwarning light/beep may turn on afterthe tires cool and pressure dropsbelow specification.Also, an illuminated TPMS warninglight, resulting from the tire airpressure dropping due to coldambient temperature, may go out ifthe ambient temperature rises. In thiscase, it will also be necessary toadjust the tire air pressures. If theTPMS warning light illuminates dueto a drop in tire air pressure, makesure to check and adjust the tire airpressures.
NOTE
l After adjusting the tire air pressures,it may require some time for theTPMS warning light to go out. If theTPMS warning light remainsilluminated, drive the vehicle at aspeed of at least 25 km/h (16 mph)for 10 minutes, and then verify that itgoes out.
l Tires can loose a little air quitenaturally over time and the TPMScannot tell if the tires are getting toosoft over time or you have a flat.However, when you find one low tirein a set of four - that is an indicationof trouble; you should have someonedrive the vehicle slowly forward soyou can inspect any low tire for cutsand any metal sticking through treador sidewall. Put a few drops of waterin the valve stem to see if it bubblesindicating a bad valve. Leaks need tobe addressed by more than simplyrefilling the trouble tire as leaks aredangerous - take it to an AuthorizedMazda Dealer which has all theequipment to fix tires, TPMSsystems and order the bestreplacement tire for your vehicle.
If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-7).
NOTE
A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used.
5-28
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page150Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (151,1)
Warning light flashes
When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.
qSystem Error Activation
When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.A system error activation may occur inthe following cases:
l When there is equipment or a devicenear the vehicle using the same radiofrequency as that of the tire pressuresensors.
l When a large metallic object (e.g. alarge electric household appliance or adesk-top computer) is placed on theright side of the rear seat, which mayblock radio signals from the tirepressure sensor to the receiver unit.
l When using the following devices inthe vehicle that may cause radiointerference with the receiver unit.
l A digital device such as a personalcomputer.
l A current converter device such as aDC-AC converter.
l When excess snow or ice adheres tothe vehicle, especially around thewheels.
l When the tire pressure sensor batteriesare exhausted.
l When using a wheel with no tirepressure sensor installed.
l When using tires with steel wirereinforcement in the side walls.
l When using tire chains.
qTires and Wheels
CAUTIONWhen inspecting or adjusting the tire airpressures, do not apply excessive forceto the stem part of the wheel unit. Thestem part could be damaged.
Changing tires and wheels
The following procedure allows theTPMS to recognize a tire pressure sensor'sunique ID signal code whenever tires orwheels are changed, such as changing toand from winter tires.
NOTE
Each tire pressure sensor has a uniqueID signal code. The signal code must beregistered with the TPMS before it canwork. The easiest way to do it is to havean Authorized Mazda Dealer changeyour tire and complete ID signal coderegistration.
When having tires changed at anAuthorized Mazda Dealer
Tire pressure sensor ID signal coderegistration is completed when anAuthorized Mazda Dealer changes yourvehicle's tires.
Driving Your Mazda
Starting and Driving
5-29
Mazda3_8V66-EA-06F_Edition3 Page151Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (152,1)
When changing tires yourself
If you or someone else changes tires, youor someone else can also undertake thesteps for the TPMS to complete the IDsignal code registration.
1. After tires have been changed, turn theignition switch to the ON position, thenturn it back to the ACC or LOCKposition.
2. Wait for about 15 minutes.
3. After about 15 minutes, drive thevehicle at a speed of at least 25 km/h(16 mph) for 10 minutes and the tirepressure sensor ID signal code will beregistered automatically.
NOTE
If the vehicle is driven within about 15minutes of changing tires, the tirepressure monitoring system warninglight will flash because the sensor IDsignal code would not have beenregistered. If this happens, park thevehicle for about 15 minutes, afterwhich the sensor ID signal code willregister upon driving the vehicle for 10minutes.
Replacing tires and wheels
CAUTIONl When replacing/repairing the tires orwheels or both, have the work doneby an Authorized Mazda Dealer, orthe tire pressure sensors may bedamaged.
l The wheels equipped on your Mazdaare specially designed for installationof the tire pressure sensors. Do notuse non-genuine wheels, otherwise itmay not be possible to install the tirepressure sensors.
Be sure to have the tire pressure sensorsinstalled whenever tires or wheels arereplaced.When having a tire or wheel or bothreplaced, the following types of tirepressure sensor installations are possible.
l The tire pressure sensor is removedfrom the old wheel and installed to thenew one.
l The same tire pressure sensor is usedwith the same wheel. Only the tire isreplaced.
l A new tire pressure sensor is installedto a new wheel.
5-30
Driving Your Mazda
Starting and Driving
Mazda3_8V66-EA-06F_Edition3 Page152Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (153,1)
NOTE
l The tire pressure sensor ID signalcode must be registered when a newtire pressure sensor is purchased. Forpurchase of a tire pressure sensor andregistration of the tire pressuresensor ID signal code, consult anAuthorized Mazda Dealer.
l When reinstalling a previouslyremoved tire pressure sensor to awheel, replace the grommet Whenreinstalling a previously removed tirepressure sensor to a wheel, replacethe grommet (seal between valvebody/sensor and wheel) for the tirepressure sensor. for the tire pressuresensor.
Driving Your Mazda
Starting and Driving
5-31
Mazda3_8V66-EA-06F_Edition3 Page153Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (154,1)
Meters and Gauges(Black-out meter)When the ignition switch is in the ON position, the dashboard gauges illuminate.
Speedometer ...................................................................................................... page 5-33Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-33Tachometer ........................................................................................................ page 5-35Engine Coolant Temperature Gauge .................................................................. page 5-35Fuel Gauge ........................................................................................................ page 5-35Instrument Cluster Dimmer Select Button (Black-out meter) ............................ page 5-36
5-32
Driving Your Mazda
Instrument Cluster and Indicators
Mazda3_8V66-EA-06F_Edition3 Page154Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (155,1)
qSpeedometer
The speedometer indicates the speed ofthe vehicle.
qOdometer, Trip Meter and TripMeter Selector
The display mode can be changedbetween trip meter A and trip meter B bypressing the selector while one of them isdisplayed. The selected mode will bedisplayed.
Selector
Trip meter
Odometer
Odometer
Odometer
Trip meter A
Press the selector
Press the selector
Trip meter B
Driving Your Mazda
Instrument Cluster and Indicators
5-33
Mazda3_8V66-EA-06F_Edition3 Page155Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (156,1)
NOTE
l (Standard meter)The odometer and trip meter can bedisplayed as follows even when theignition switch is in the ACC orLOCK position.
l Displays for 10 minutes after theignition switch is turned to theACC or LOCK position from theON position.
l Displays for 10 minutes after thedriver's door is opened.
l (Black-out meter)When the ignition switch is in theACC or LOCK position, theodometer or trip meters cannot bedisplayed, however, pressing theselector button can inadvertentlyswitch the trip meters or reset themduring an approximate ten-minuteperiod in the following cases:
l After the ignition switch is turnedto the ACC or LOCK positionfrom the ON position.
l After the driver's door is opened.
Odometer
The odometer records the total distancethe vehicle has been driven.
Trip meter
The trip meter can record the totaldistance of two trips. One is recorded intrip meter A, and the other is recorded intrip meter B.
For instance, trip meter A can record thedistance from the point of origin, and tripmeter B can record the distance fromwhere the fuel tank is filled.
When trip meter A is selected, pressingthe selector again within one second willchange to trip meter B mode.
When trip meter A is selected, TRIPAwill be displayed. When trip meter B isselected, TRIP B will be displayed.
The trip meter records the total distancethe vehicle is driven until the meter isagain reset. Return it to “0.0” by holdingthe selector depressed for more than 1second. Use this meter to measure tripdistances and to compute fuelconsumption.
NOTE
l Only the trip meters record tenths ofkilometers (miles).
l The trip record will be erased when:
l The power supply is interrupted(blown fuse or the battery isdisconnected).
l The vehicle is driven over999.9 km (mile).
5-34
Driving Your Mazda
Instrument Cluster and Indicators
Mazda3_8V66-EA-06F_Edition3 Page156Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (157,1)
qTachometer
The tachometer shows engine speed inthousands of revolutions per minute(rpm).
Red zoneWith turbochargerWithout turbocharger
CAUTIONDon't run the engine with thetachometer needle in the RED ZONE.This may cause severe engine damage.
qEngine Coolant Temperature Gauge
The engine coolant temperature gaugeshows the temperature of the enginecoolant.
If the needle is near H, it indicatesoverheating.
CAUTIONDriving with an overheated engine cancause serious engine damage (page7-13).
qFuel Gauge
The fuel gauge shows approximately howmuch fuel is in the tank. We recommendkeeping the tank over 1/4 full. When thelow fuel warning light illuminates orwhen the needle is near E, refuel as soonas possible.
Low fuel warning light
NOTE
The direction of the arrow ( ) shownnext to the low fuel warning lightindicates that the fuel-filler lid is on theright side of the vehicle.
Driving Your Mazda
Instrument Cluster and Indicators
5-35
Mazda3_8V66-EA-06F_Edition3 Page157Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (158,1)
qDashboard Illumination
When the exterior lights are on, rotate thethumb-wheel to adjust the brightness ofthe dashboard lights.
Bright
Dim
NOTE
Black-out meterWhen the instrument cluster dimmer iscanceled, the instrument clusterillumination intensity will not changeby rotating the thumb-wheel.Refer to Instrument Cluster DimmerSelect Button on page 5-36.
qInstrument Cluster DimmerSelect Button (Black-out meter)
The instrument cluster dimmer selectbutton is operable when the ignitionswitch is in the ON position.
Instrument cluster dimmer select button
Adjusting the instrument clusterillumination intensity (With exteriorlights off)
When the exterior lights are off, theinstrument cluster illumination can beadjusted to one of five levels bysuccessively pressing the instrumentcluster dimmer select button.
Canceling the instrument clusterillumination dimmer (With exteriorlights on)
When the exterior lights are on, theinstrument cluster illumination dims.When driving on snowy or foggy roads,or in other situations when the instrumentcluster's visibility is reduced due to glarefrom surrounding brightness, theinstrument cluster dimmer select buttonincreases the illumination intensity.Press the button to increase the intensityof the instrument cluster illumination.Press the button again to return to theprevious illumination intensity.
5-36
Driving Your Mazda
Instrument Cluster and Indicators
Mazda3_8V66-EA-06F_Edition3 Page158Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (159,1)
Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal Warning/Indicator Lights Page
Brake System Warning Light 5-39
Charging System Warning Light 5-40
Engine Oil Pressure Warning Light 5-41
Check Engine Light 5-41
ABS Warning Light 5-39
Air Bag/Front Seat Belt Pretensioner System Warning Light 5-42
Low Fuel Warning Light 5-42
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-37
Mazda3_8V66-EA-06F_Edition3 Page159Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (160,1)
Signal Warning/Indicator Lights Page
Seat Belt Warning Light/Beep 5-42
Door-Ajar Warning Light 5-44
Low Washer Fluid Level Warning Light 5-44
Automatic Transaxle Warning Light 5-44
Tire Pressure Monitoring System Warning Light 5-44
Security Indicator Light 5-46
Headlight High-Beam Indicator Light 5-46
Shift Position Indicator Light 5-47
TCS/DSC Indicator Light 5-47
DSC OFF Indicator Light 5-47
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) 5-48
Light-On Indicator Light 5-48
Power Steering Malfunction Indicator Light 5-48
Turn Signal/Hazard Warning Indicator Lights 5-49
5-38
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page160Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (161,1)
qBrake System Warning Light
This warning has the following functions:
Parking brake warning
The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brakeis fully released, you may have a brakeproblem.
Drive to the side of the road and park offthe right-of-way.
You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.
1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-23).
2. After adding fluid, check the lightagain.
If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.
Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.
NOTE
Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.
WARNINGDo not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to have thebrakes inspected as soon as possible:Driving with the brake system warninglight illuminated is dangerous. Itindicates that your brakes may notwork at all or that they couldcompletely fail at any time. If this lightremains illuminated, after checkingthat the parking brake is fullyreleased, have the brakes inspectedimmediately.
qABS Warning Lightí
The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-39íSome models.
Mazda3_8V66-EA-06F_Edition3 Page161Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (162,1)
If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.
NOTE
When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.
qElectronic Brake ForceDistribution System Warningí
If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.
WARNINGDo not drive with both the ABSwarning light and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe brakes inspected as soon aspossible:Driving when the brake systemwarning light and ABS warning lightare illuminated at the same time isdangerous.When both lights are illuminated, therear wheels could lock more quickly inan emergency stop than under normalcircumstances.
qCharging System Warning Light
This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.
If the warning light illuminates whiledriving, it indicates a malfunction of thealternator or of the charging system.Drive to the side of the road and park offthe right-of-way. Consult an AuthorizedMazda Dealer.
5-40
Driving Your Mazda
íSome models.
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page162Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (163,1)
CAUTIONDon't continue driving when thecharging system warning light isilluminated because the engine couldstop unexpectedly.
qEngine Oil Pressure Warning Light
This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.
This warning light indicates low engineoil pressure.
If the light illuminates while driving:
1. Drive to the side of the road and parkoff the right-of-way on level ground.
2. Turn off the engine and wait 5 minutesfor the oil to drain back into the oilpan.
3. Inspect the engine oil level (page 8-20).If it's low, add oil.
4. Start the engine and check the warninglight.
If the light remains illuminated even afteryou add oil, stop the engine immediatelyand have your vehicle towed to anAuthorized Mazda Dealer.
CAUTIONDon't run the engine if oil pressure islow. It could result in extensive enginedamage.
qCheck Engine Light
This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.
If this light comes on while driving, thevehicle may have a problem. It isimportant to note the driving conditionswhen the light came on and consult anAuthorized Mazda Dealer.
The check engine light may come on inthe following cases:
l The fuel tank level being very low orapproaching empty.
l The engine's electrical system has aproblem.
l The emission control system has aproblem.
l The fuel-filler cap is missing or nottightened securely.
If the check engine light remains on orflashes continuously, do not drive at highspeeds and consult an Authorized MazdaDealer as soon as possible.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-41
Mazda3_8V66-EA-06F_Edition3 Page163Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (164,1)
qAir Bag/Front Seat BeltPretensioner System Warning Light
If the air bag/front seat belt pretensionersystem is working properly, the warninglight illuminates when the ignition switchis turned to the ON position or after theengine is cranked. The warning light turnsoff after a specified period of time.
A system malfunction is indicated if thewarning light constantly illuminates ordoes not illuminate at all when theignition switch is turned to the ONposition. If either of these occur, consultan Authorized Mazda Dealer as soon aspossible. The system may not work in anaccident.
WARNINGNever tamper with the air bag/pretensioner systems and always havean Authorized Mazda Dealer performall servicing and repairs:Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled causingserious injury or death.
qLow Fuel Warning Light
Low fuel warning light
This warning light in the fuel gaugesignals that the fuel tank will soon beempty.Refuel as soon as possible.
qSeat Belt Warning Light/Beep
The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.
Conditions of operation
Condition Result
The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.
The warning lightflashes and a beepsound will be heardfor about 6 seconds.
The driver's seat belt isfastened while the warninglight and the beep sound areactivated.
The warning lightturns off and the beepsound stops.
The driver's seat belt isfastened before the ignitionswitch is turned to the ONposition.
The warning light willnot illuminate and thebeep sound will not beheard.
5-42
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page164Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (165,1)
Belt minder
NOTE
The belt minder can be deactivated.Consult an Authorized Mazda Dealer todeactivate and restore the seat beltminder.
Driver seated/Front passenger notseatedThe belt minder is a supplementalwarning to the seat belt warning function.If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, the warning light/beepoperates to give you further remindersaccording to the chart below.
Condition
Vehicle speed
Between 0― 20km/h
(0 ― 12 mph)
20 km/h(12 mph) or
more
Seat belt
Indicator
Beep
: Fastened: Unfastened: Illuminated: Flashing: Beep
Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.
Driver seated/Front passenger seatedThe seat belt warning function remindsthe front passenger to fasten the seat beltaccording to the chart below.
Condition
Vehicle speed
Between 0― 20km/h
(0 ― 12 mph)
20 km/h(12 mph) or
more
Seat belt(Driver)
Seat belt(Passenger)
Indicator
Beep
: Fastened: Unfastened: Illuminated: Flashing: Beep
Once the beep sound is heard, it continuessounding even if the vehicle speed lowersto 20 km/h (12 mph) or less until theseatbelt is fastened or the beep soundperiod has passed.
NOTE
l To allow the front passenger seatweight sensor to function properly,do not place and sit on an additionalseat cushion on the front passengerseat. The sensor may not functionproperly because the additional seatcushion could cause sensorinterference.
l Placing packages, luggage, pets orother items on the front passengerseat may cause the front passengerseat belt warning function to operatedepending on the weight of the item.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-43
Mazda3_8V66-EA-06F_Edition3 Page165Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (166,1)
qDoor-Ajar Warning Light
This warning light comes on when anydoor or liftgate isn't securely closed.
qLowWasher Fluid LevelWarning Lightí
This warning light indicates that littlewasher fluid remains. Add fluid (page8-28).
qAutomatic Transaxle Warning Light
This warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.The light illuminates when the transaxlehas a problem.
CAUTIONIf the automatic transaxle warning lightilluminates, the transaxle has anelectrical problem. Continuing to driveyour Mazda in this condition couldcause damage to your transaxle.Consult an Authorized Mazda Dealer assoon as possible.
qTire Pressure Monitoring SystemWarning Lightí
This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position.
Thereafter, the warning light illuminateswhen tire pressure is too low in one ormore tires, and flashes when there is asystem malfunction.
5-44
Driving Your Mazda
íSome models.
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page166Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (167,1)
WARNINGIf the tire pressure monitoring systemwarning light illuminates or flashes,or the tire pressure warning beepsound is heard, decrease vehicle speedimmediately and avoid suddenmaneuvering and braking:If the tire pressure monitoring systemwarning light illuminates or flashes,or the tire pressure warning beepsound is heard, it is dangerous to drivethe vehicle at high speeds, or performsudden maneuvering or braking.Vehicle drivability could worsen andresult in an accident.To determine if you have a slow leakor a flat, pull over to a safe positionwhere you can check the visualcondition of the tire and determine ifyou have enough air to proceed to aplace where air may be added and thesystem monitored again, anAuthorized Mazda Dealer or a tirerepair station.
Do not ignore the TPMS WarningLight:Ignoring the TPMS warning light isdangerous, even if you know why it isilluminated. Have the problem takencare of as soon as possible before itdevelops into a more serious situationthat could lead to tire failure and adangerous accident.
Warning light illuminates/Warningbeep sounds
When the warning light illuminates, andthe warning beep sound is heard (about 3seconds), tire pressure is too low in one ormore tires.
Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-8).
CAUTIONWhen replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.
NOTE
l Perform tire pressure adjustmentwhen the tires are cold. Tire pressurewill vary according to the tiretemperature, therefore let the vehiclestand for 1 hour or only drive it1.6 km (1 mile) or less beforeadjusting the tire pressures. Whenpressure is adjusted on hot tires tothe cold inflation pressure, the TPMSwarning light/beep may turn on afterthe tires cool and pressure dropsbelow specification.Also, an illuminated TPMS warninglight, resulting from the tire airpressure dropping due to coldambient temperature, may go out ifthe ambient temperature rises. In thiscase, it will also be necessary toadjust the tire air pressures. If theTPMS warning light illuminates dueto a drop in tire air pressure, makesure to check and adjust the tire airpressures.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-45
Mazda3_8V66-EA-06F_Edition3 Page167Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (168,1)
NOTE
l After adjusting the tire air pressures,it may require some time for theTPMS warning light to go out. If theTPMS warning light remainsilluminated, drive the vehicle at aspeed of at least 25 km/h (16 mph)for 10 minutes, and then verify that itgoes out.
l Tires can loose a little air quitenaturally over time and the TPMScannot tell if the tires are getting toosoft over time or you have a flat.However, when you find one low tirein a set of four - that is an indicationof trouble; you should have someonedrive the vehicle slowly forward soyou can inspect any low tire for cutsand any metal sticking through treador sidewall. Put a few drops of waterin the valve stem to see if it bubblesindicating a bad valve. Leaks need tobe addressed by more than simplyrefilling the trouble tire as leaks aredangerous - take it to an AuthorizedMazda Dealer which has all theequipment to fix tires, TPMSsystems and order the bestreplacement tire for your vehicle.
If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-7).
NOTE
A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used.
Warning light flashes
When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.
qSecurity Indicator Light
This indicator light starts flashing every 2seconds when the ignition switch is turnedfrom the ON to the ACC position and theimmobilizer system is armed.
The light stops flashing when the ignitionswitch is turned to the ON position withthe correct ignition key.At this time, the immobilizer system isdisarmed and the light illuminates forabout 3 seconds and then goes out.
If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.
qHeadlight High-Beam IndicatorLight
This light indicates one of two things:
l The high-beam headlights are on.
5-46
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page168Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (169,1)
l The turn signal lever is in the flash-to-pass position.
qShift Position Indicator Light(Automatic Transaxle)
This indicates the selected shift positionwhen the ignition switch is in the ONposition.
Gear position indicator
Gear position indicator
When the shift lever is in the D or Mposition, the numeral for the selected geardisplays.
qTCS/DSC Indicator Lightí
This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position. If the TCS or DSC isoperating, the indicator light flashes.
If the light stays on, the TCS or DSC mayhave a malfunction and they may notoperate correctly. Take your vehicle to anAuthorized Mazda Dealer.
qDSC OFF Indicator Lightí
This indicator light stays on for a fewseconds when the ignition switch is turnedto the ON position.It also comes on when the DSC OFFswitch is pressed and TCS/DSC isswitched off (page 5-24).
If the light stays on when the TCS/DSC isnot switched off, take your vehicle to anAuthorized Mazda Dealer. The dynamicstability control may have a malfunction.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-47íSome models.
Mazda3_8V66-EA-06F_Edition3 Page169Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (170,1)
qCruise Main Indicator Light(Amber)/Cruise Set IndicatorLight (Green)í
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
The indicator light illuminates amberwhen the ON/OFF switch is pressed andthe cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green whena cruising speed has been set.
qLight-On Indicator Light (Black-out meter)
This indicator light comes on when theexterior lights and dashboard illuminationare on.
qPower Steering MalfunctionIndicator Lightí
This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.
If the light stays illuminated after theengine is started or illuminates whiledriving, turn off the engine after parkingin a safe place, and then start the engineagain.If the light does not illuminate afterrestarting the engine, this indicates thatthe power steering is restored and normalsteering is possible.If the light remains illuminated, the powersteering is still inoperable. Consult anAuthorized Mazda Dealer.
NOTE
The power steering system is inoperablewhen the power steering malfunctionindicator light illuminates. Steering ispossible, but requires more physicaleffort.
5-48
Driving Your Mazda
íSome models.
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page170Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (171,1)
qTurn-Signal/Hazard WarningIndicator Lights
When operating the turn signal lights, theleft or right turn signal indicator lightflashes to indicate which turn signal lightis operating (page 5-54).
When operating the hazard warninglights, both turn signal indicator lightsflash (page 5-61).
NOTE
If an indicator light remains illuminated(does not flash) or if it flashesabnormally, one of the turn signal bulbsmay be burned out.
Beep Sounds
qAir Bag/Front Seat BeltPretensioner System Warning Beep
If a malfunction is detected in both the airbag/front seat belt pretensioner systemand the warning light, a warning beepsound will be heard for about 1 minute.After that, the one-minute beep will berepeated every 30 minutes.
Have your vehicle inspected at anAuthorized Mazda Dealer as soon aspossible.
WARNINGDo not drive the vehicle with the airbag/front seat belt pretensioner systemwarning beep sounding:Driving the vehicle with the air bag/front seat belt pretensioner systemwarning beep sounding is dangerous.In a collision, the air bags and thefront seat belt pretensioner system willnot deploy and this could result indeath or serious injury.Contact an Authorized Mazda Dealerto have the vehicle inspected as soonas possible.
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
5-49
Mazda3_8V66-EA-06F_Edition3 Page171Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (172,1)
qSeat Belt Warning Beep
If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, a beep sound will be heardfor about 6 seconds.If the driver's seat belt is not fastened andthe vehicle is driven at a speed faster thanabout 20 km/h (12 mph), a beep soundwill be heard again for a specified periodof time.Refer to Seat Belt Warning Light/Beep onpage 5-42.
qIgnition Key Reminder
If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.
qLights-On Reminder
If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.
qTire Inflation Pressure WarningBeepí
The warning beep sound will be heard forabout 3 seconds when there is anyabnormality in tire inflation pressures(page 5-25).
5-50
Driving Your Mazda
íSome models.
Warning/Indicator Lights and Beep Sounds
Mazda3_8V66-EA-06F_Edition3 Page172Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (173,1)
Lighting Control
qHeadlights
Type A (Without AUTO position)
Turn the headlight switch to turn theheadlights, other exterior lights anddashboard illumination on or off.
Switch Position
Headlights Off Off On
TaillightsParking lightsLicense lightsSide-marker lightsDashboard illumination
Off On On
NOTE
To prevent discharging the battery, don'tleave the lights on while the engine isoff unless safety requires them.
Type B (With AUTO position)
Turn the headlight switch to turn theheadlights, other exterior lights anddashboard illumination on or off.
Switch Position
Headlights Off Off On
Auto
TaillightsParking lightsLicense lightsSide-markerlightsDashboardillumination
Off On On
NOTE
To prevent discharging the battery, don'tleave the lights on while the engine isoff unless safety requires them.
AUTO(Auto-light control)When the headlight switch is in theAUTO position and the ignition switch isin the ON position, the light sensor sensesthe surrounding lightness or darkness andautomatically turns on or off theheadlights, other exterior lights anddashboard illumination (see chart above).
Driving Your Mazda
Switches and Controls
5-51
Mazda3_8V66-EA-06F_Edition3 Page173Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (174,1)
CAUTIONl Do not shade the light sensor byadhering a sticker or a label on thewindshield. Otherwise the lightsensor will not operate correctly.
Light sensor
l The light sensor also works as a rainsensor for the auto-wiper control.Keep hands and scrapers clear of thewindshield when the ignition switchis in the ON position as fingerspinched or the wipers and wiperblades damaged when they activateautomatically. If you are going toclean the windshield, be sure thewipers are turned off completely -this is particularly important whenclearing ice and snow - when it isparticularly tempting to leave theengine running.
NOTE
l When the headlight switch is in theAUTO position and the ignitionswitch is turned to the ACC orLOCK position, the headlights, otherexterior lights and dashboardillumination will turn off.
l The timing for turning on theheadlights, other exterior lights anddashboard illumination can bedelayed by adjusting the sensitivityof the light sensor. Consult anAuthorized Mazda Dealer regardingsensor adjustment.
Xenon fusion headlight bulbsí
The low-beam bulbs of the headlightshave xenon fusion bulbs that produce abright white beam over a wide area.
WARNINGDo not replace the xenon fusion bulbsyourself:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the replacement isnecessary.
NOTE
If the headlights flicker, or thebrightness weakens, the bulb-life maybe depleted and a replacement isnecessary. Consult an AuthorizedMazda Dealer.
5-52
Driving Your Mazda
íSome models.
Switches and Controls
Mazda3_8V66-EA-06F_Edition3 Page174Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (175,1)
qLights-On Reminder
If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.
qHeadlight High-Low Beam
Push the lever forward for high beam.Pull back to original position for lowbeam.
High beam
Low beam
qFlashing the Headlights
To flash the headlights, pull the lever fullytoward you. The headlight switch doesnot need to be on, and the lever will returnto the normal position when released.
qHeadlight Levelingí
The number of passengers and weight ofcargo in the luggage compartment changethe angle of the headlights.
The headlight leveling switch adjusts thisangle.
Select the proper setting from thefollowing chart.Without turbocharger
Front seat Rearseat
LoadSwitchPositionDriver Passenger
× ― ― ― 0
× × ― ― 0
× × × ― 1
× × × × 2
× ― ― × 3
×: Yes―: No
With turbocharger
Front seat Rearseat
LoadSwitchPositionDriver Passenger
× ― ― ― 0
× × ― ― 0
× × × ― 1
× × × × 1
× ― ― × 2
×: Yes―: No
Driving Your Mazda
Switches and Controls
5-53íSome models.
Mazda3_8V66-EA-06F_Edition3 Page175Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (176,1)
qDaytime Running Lights (Canada)
In Canada, vehicles must be driven withthe headlights on during daytimeoperation.
For that reason, the daytime running lightsautomatically turn on when the ignitionswitch is turned to the ON position.
NOTE
The Daytime Running Lights turn offwhen the parking brake is applied.
Turn and Lane-ChangeSignals
qTurn Signal
Move the signal lever down (for a leftturn) or up (for a right turn) to the stopposition. The signal will self-cancel afterthe turn is completed.
If the indicator light continues to flashafter a turn, manually return the lever toits original position.
Right turn
Left turn
OFF
Right lane change
Left lane change
Green indicators on the dashboard showwhich signal is working.
Lane-change signals
Move the lever slightly toward thedirection of the change ―until theindicator flashes― and hold it there. Itwill return to the off position whenreleased.
NOTE
If an indicator light stays on withoutflashing or if it flashes abnormally, oneof the turn signal bulbs may be burnedout.
5-54
Driving Your Mazda
Switches and Controls
Mazda3_8V66-EA-06F_Edition3 Page176Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (177,1)
Fog Lightsí
The fog lights help you to see as well asto be seen.
The headlights must be turned on to turnon the front fog lights.
To turn the front fog lights on, rotate thefog light switch to the position.
Fog light switch
To turn the front fog lights off, rotate thefog light switch to the OFF position orturn the headlights off.
NOTE
l The fog lights will turn off when theheadlights are set at high beam.
l (With auto-light control)If the headlight switch is in theAUTO position, the front fog lightscan be turned on when theheadlights, the exterior lights anddashboard illumination are on.
Windshield Wipers andWasher
The ignition switch must be in the ONposition.
WARNINGUse only windshield washer fluid orplain water in the reservoir:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident.
Do not use the washer without firstwarming the windshield and never useplain tap water:Using windshield washer fluid withoutanti-freeze protection in freezingtemperatures is dangerous. Thewasher fluid could freeze on thewindshield and block your vision. Youcould have an accident.
Driving Your Mazda
Switches and Controls
5-55íSome models.
Mazda3_8V66-EA-06F_Edition3 Page177Wednesday, August 23 2006 11:19 AM
Form No.8V66-EA-06F
Black plate (178,1)
NOTE
Because heavy ice and snow can jamthe wiper blades, the wiper motor isprotected from motor breakdown,overheating and possible fire by acircuit breaker. This mechanism willautomatically stop operation of theblades, but only for about 5 minutes.If this happens, turn off the wiperswitch and park off the right-of-way,and remove the snow and ice.After 5 minutes, turn on the switch andthe blades should operate normally. Ifthey don't resume functioning, consultan Authorized Mazda Dealer as soon aspossible. Drive to the side of the roadand park off the right-of-way. Wait untilthe weather clears before trying to drivewith the wipers inoperative.
qWindshield Wipers
Type A (With INT position)
Turn the wipers on by pulling the leverdown.
― MistINT ― Intermittent1 ― Low speed2 ― High speed
For a single wiping cycle, push the leverup to .
Variable-speed intermittent wipersí
Set the lever to INT and choose theinterval timing by rotating the ring.
INT ring
Type B (With AUTO position)
Turn the wipers on by pulling the leverdown.
― MistAUTO― Auto control1 ― Low speed2 ― High speed
For a single wiping cycle, push the leverup to .
5-56
Driving Your Mazda
íSome models.
Switches and Controls
Mazda3_8V66-EA-06F_Edition3 Page178Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (179,1)
AUTO (Auto-wiper control)When the wiper lever is in the AUTOposition, the rain sensor senses theamount of rainfall on the windshield andturns the wiper on or off automatically(off―intermittent―low speed―highspeed).
The sensitivity of the rain sensor can beadjusted by turning the switch on thewiper lever.From the center position (normal), turnthe switch towards (+) for highersensitivity (faster response) or turn theswitch towards (_) for less sensitivity(slower response).
Switch
Higher sensitivity
Less sensitivity
Center position
CAUTIONl Do not shade the rain sensor byadhering a sticker or a label on thewindshield. Otherwise the rainsensor will not operate correctly.
Rain sensor
Driving Your Mazda
Switches and Controls
5-57
Mazda3_8V66-EA-06F_Edition3 Page179Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (180,1)
CAUTIONl When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically inthe following cases:
l If the windshield above the rainsensor is touched.
l If the windshield above the rainsensor is wiped with a cloth.
l If the windshield is struck with ahand or other object.
l If the rain sensor is struck with ahand or other object from insidethe vehicle.
Keep hands and scrapers clear of thewindshield when the ignition switchis in the ON position as fingerspinched or the wipers and wiperblades damaged when they activateautomatically. If you are going toclean the windshield, be sure thewipers are turned off completely -this is particularly important whenclearing ice and snow - when it isparticularly tempting to leave theengine running.
NOTE
l The auto-wiper control may notoperate when the rain sensortemperature is about _10 °C(14 °F)or lower, or about 85 °C(185 °F) orhigher.
l If the windshield is coated withwater repellent, the rain sensor maynot be able to sense the amount ofrainfall correctly and auto-wipercontrol may not operate properly.
l If dirt or foreign matter (e.g. ice ormatter containing salt water) adheresto the windshield above the rainsensor or if the windshield is iced, itcould cause the wipers to moveautomatically. However, if the wiperscannot remove this ice, dirt orforeign matter, the auto-wipercontrol will stop operation. In thiscase, pull the wiper lever to the 1 or2 position for manual operation, orremove the ice, dirt or foreign matterby hand to restore the auto-wiperoperation.
qWindshield Washer
Pull the lever toward you and hold it tospray washer fluid.
OFF
Washer
5-58
Driving Your Mazda
Switches and Controls
Mazda3_8V66-EA-06F_Edition3 Page180Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (181,1)
NOTE
With the wiper lever in the OFF or INT(Type A)/AUTO (Type B) position, thewipers will operate continuously untilthe lever is released.
If the washer doesn't work, inspect thefluid level (page 8-28). If it's OK, consultan Authorized Mazda Dealer.
Rear Window Wiper andWasher (5 Door)
The ignition switch must be in the ONposition.
qRear Window Wiper
Turn the wiper on by turning the rearwiper/washer switch.ON ― NormalINT ― Intermittent
qRear Window Washer
To spray washer fluid, turn the rear wiper/washer switch to the position. Afterthe switch is released, the washer willstop.
NOTE
The washer with wiper function isactivated by rotating the rear wiperswitch all the way up. The washer onlyfunction is activated by rotating theswitch all the way down.
If the washer doesn't work, inspect thefluid level (page 8-28). If it's OK and thewasher still doesn't work, consult anAuthorized Mazda Dealer.
Driving Your Mazda
Switches and Controls
5-59
Mazda3_8V66-EA-06F_Edition3 Page181Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (182,1)
Rear Window DefrosterThe rear window defroster clears frost,fog, and thin ice from the rear window.
The ignition switch must be in the ONposition.
Press the switch to turn on the rearwindow defroster. The rear windowdefroster operates for about 10―15minutes and turns off automatically.The indicator light illuminates duringoperation.
To turn off the rear window defrosterbefore the 10―15 minutes has elapsed,press the switch again.
Manual Type Air-Conditioning
Indicator light
Fully Automatic Type Air-Conditioning
Indicator light
CAUTIONDon't use sharp instruments or windowcleaners with abrasives to clean theinside of the rear window surface. Theymay damage the defroster grid insidethe window.
NOTE
This defroster is not designed formelting snow. If there is anaccumulation of snow on the rearwindow, remove it before using thedefroster.
5-60
Driving Your Mazda
Switches and Controls
Mazda3_8V66-EA-06F_Edition3 Page182Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (183,1)
HornTo sound the horn, press the mark onthe steering wheel.
Hazard Warning FlasherThe hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency.
The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.
Hazard warning flasher
Depress the hazard warning flasher and allthe turn signals will flash.
NOTE
l The turn signals don't work when thehazard warning lights are on.
l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.
Driving Your Mazda
Switches and Controls
5-61
Mazda3_8V66-EA-06F_Edition3 Page183Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (184,1)
5-62
Mazda3_8V66-EA-06F_Edition3 Page184Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (185,1)
6 Interior Comfort
Use of various features for drive comfort, including air-conditioning and audiosystem.
Climate Control System ............................................................... 6-2Operating Tips ........................................................................... 6-2Vent Operation .......................................................................... 6-3Types of the Climate Control System ....................................... 6-5Manual Typeí .......................................................................... 6-6Fully Automatic Typeí ........................................................... 6-11
Audio System ............................................................................... 6-16Antenna ................................................................................... 6-16Operating Tips for Audio System ........................................... 6-17Audio Set ................................................................................ 6-27Audio Control Switch Operation (Steering Wheel)í ............. 6-45Auxiliary Input ........................................................................ 6-47Safety Certification ................................................................. 6-51
Interior Equipment ..................................................................... 6-52Sunvisors ................................................................................. 6-52Interior Lights ......................................................................... 6-52Information Display ................................................................ 6-55Lighter ..................................................................................... 6-60Ashtray .................................................................................... 6-61Cup Holder .............................................................................. 6-61Bottle Holder ........................................................................... 6-62Storage Compartments ............................................................ 6-63Accessory Socketsí ................................................................ 6-67
6-1íSome models.
Mazda3_8V66-EA-06F_Edition3 Page185Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (186,1)
Operating Tips
qOperating the Climate ControlSystem
Operate the climate control system withthe engine running.
NOTE
To prevent the battery from beingdischarged, do not leave the fan controldial on for a long period of time withthe ignition switch in the ACC positionwhen the engine is not running.
qClearing the Air Inlet
Clear all obstructions like leaves, snowand ice from the hood and the air inlet inthe cowl grille to improve the systemefficiency.
qFoggy Windows
The windows may fog up easily in humidweather. Use the climate control system todefog the windows.
To help defog the windows, operate theair conditioner to dehumidify the air.
NOTE
The air conditioner may be used alongwith the heater to dehumidify the air.
qOutside/Recirculated Air Position
Use the outside air position in normalconditions. The recirculated air positionshould be used only when driving ondusty roads or for quick cooling of theinterior.
qParking in Direct Sunlight
If the vehicle has been parked in directsunlight during hot weather, open thewindows to let warm air escape, then runthe climate control system.
qNot Using for a Long Period
Run the air conditioner about 10 minutesat least once a month to keep internalparts lubricated.
qCheck the Refrigerant before theWeather Gets Hot
Have the air conditioner checked beforethe weather gets hot. Lack of refrigerantmay make the air conditioner lessefficient. Consult an Authorized MazdaDealer for refrigerant inspection.
The air conditioner is filled withHFC134a (R134a), a refrigerant that willnot damage the ozone layer.If the air conditioner is low on refrigerantor has a malfunction, consult anAuthorized Mazda Dealer.
qReplacement of the Cabin Air Filter
If your vehicle is equipped with an airfilter for the air conditioner, it is necessaryto change the filter periodically asindicated in scheduled maintenance (page8-3). Consult an Authorized MazdaDealer for replacement of the cabin airfilter.
6-2
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page186Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (187,1)
Vent Operation
Center vents
Side vents
qAdjusting the Vents
Directing airflow
Side Vents
To adjust the direction of airflow, open thevents and rotate them left and right.
Push
Center Vents
To adjust the direction of airflow, movethe adjustment knob.
Knob
NOTE
When using the air conditioner, mistmay come out from the vents. This isnot a sign of trouble but a result ofhumid air being suddenly cooled.
Interior Comfort
Climate Control System
6-3
Mazda3_8V66-EA-06F_Edition3 Page187Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (188,1)
qSelecting the Airflow Mode
Floor Vents
Dashboard and Floor Vents
Dashboard Vents Defroster and Floor Vents
Defroster Vents
6-4
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page188Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (189,1)
Types of the Climate Control SystemManual type and fully automatic type climate control systems are explained separately.Check your vehicle's climate control type and read the appropriate pages.Manual Type ............................................................................................................ page 6-6
Fully Automatic Type ............................................................................................. page 6-11
Interior Comfort
Climate Control System
6-5
Mazda3_8V66-EA-06F_Edition3 Page189Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (190,1)
Manual Typeí
Air intake selectorA/C switch
Mode selector dial Temperature control dialFan control dial
Some models.
qControl Switches
Temperature control dial
Cold Hot
This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold.
Fan control dial
This dial allows variable fan speeds.0―Fan off1―Low speed2―Medium low speed3―Medium high speed4―High speed
6-6
Interior Comfort
íSome models.
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page190Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (191,1)
Mode selector dial
Turn the mode selector dial to selectairflow mode (page 6-4).
NOTE
l If you want to slightly adjust theairflow amount, set the modeselector dial at .
l For example, when the mode selectordial is at the position between the
and positions, airflow fromthe floor vent is less than that of the
position.
A/C switch í
Push the A/C switch to turn the airconditioner on. The indicator light on theswitch will illuminate when the fancontrol dial is set at position 1, 2, 3, or 4.
Push the switch once again to turn the airconditioner off.
NOTE
The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F).
Air intake selector
This switch controls the source of airentering the vehicle.
Press the switch to alternatebetween the outside air and recirculatedair modes.
It is recommended that under normalconditions the switch be kept in theoutside air mode.
Outside air mode (Indicator light is off)
Outside air is taken into the vehicle. Usethis mode for normal ventilation andheating.
Recirculated air mode (Indicator lightis on)
Outside air is shut off. Air within thevehicle is recirculated.
This mode can be used when driving on adusty road or in similar conditions. It alsohelps to provide quicker cooling of theinterior.
Interior Comfort
Climate Control System
6-7íSome models.
Mazda3_8V66-EA-06F_Edition3 Page191Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (192,1)
WARNINGDo not use the recirculated air modein cold or rainy weather:Using the recirculated air mode incold or rainy weather is dangerous asit will cause the windows to fog up.Your vision will be hampered, whichcould lead to a serious accident.
qHeating
1. Set the mode selector dial to theposition.
2. Set the temperature control dial to thehot position.
3. Set the fan control dial to the desiredspeed.
NOTE
l If the windshield fogs up easily, setthe mode selector dial to theposition.
l If cooler air is desired at face level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.
l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).
l In the , , or position, theair conditioner is automaticallyturned on (however, the indicatorlight does not illuminate) and theoutside air mode is automaticallyselected to defrost the windshield.In the or position, the outsideair mode cannot be changed to therecirculated air mode.
qCooling (With Air Conditioner)
1. Set the mode selector dial to theposition.
2. Set the temperature control dial to thecold position.
3. Set the fan control dial to the desiredspeed.
4. Turn on the air conditioner by pressingthe A/C switch.
5. Adjust the fan control dial andtemperature control dial to maintainmaximum comfort.
6-8
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page192Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (193,1)
CAUTIONWhen using the air conditioner whiledriving up long hills or in heavy traffic,closely monitor the temperature gauge(page 5-35).The air conditioner may cause engineoverheating. If the gauge indicatesoverheating, turn the air conditioner off(page 7-13).
NOTE
l When maximum cooling is desired,set the temperature control dial to theextreme cold position and set the airintake selector to the recirculated airmode, then set the fan control dial toposition 4.
l If warmer air is desired at floor level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.
l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).
qVentilation
1. Set the mode selector dial to theposition.
2. Set the air intake selector to the outsideair mode.
3. Set the temperature control dial to thedesired position.
4. Set the fan control dial to the desiredspeed.
qWindshield Defrosting and Defogging
1. Set the mode selector dial to theposition.
2. Set the temperature control dial to thedesired position.
3. Set the fan control dial to the desiredspeed.
WARNING
Do not defog the windshield using theposition with the temperature
control set to the cold position:Using the position with thetemperature control set to the coldposition is dangerous as it will causethe outside of the windshield to fog up.Your vision will be hampered, whichcould lead to a serious accident. Setthe temperature control to the hot orwarm position when using theposition.
Interior Comfort
Climate Control System
6-9
Mazda3_8V66-EA-06F_Edition3 Page193Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (194,1)
NOTE
l For maximum defrosting, set thetemperature control dial to theextreme hot position and the fancontrol dial to position 4.
l If warm air is desired at the floor, setthe mode selector dial to theposition.
l In the , , or position, theair conditioner is automaticallyturned on (however, the indicatorlight does not illuminate) and theoutside air mode is automaticallyselected to defrost the windshield.In the or position, the outsideair mode cannot be changed to therecirculated air mode.
qDehumidifying (With AirConditioner)
Operate the air conditioner in cool or coldweather to help defog the windshield andside windows.
1. Set the mode selector dial to thedesired position.
2. Set the air intake selector to the outsideair mode.
3. Set the temperature control dial to thedesired position.
4. Set the fan control dial to the desiredspeed.
5. Turn on the air conditioner by pressingthe A/C switch.
NOTE
One of the functions of the airconditioner is dehumidifying the airand, to use this function, thetemperature does not have to be set tocold. Therefore, set the temperaturecontrol dial to the desired position (hotor cold) and turn on the air conditionerwhen you want to dehumidify the cabinair.
6-10
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page194Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (195,1)
Fully Automatic Typeí
Climate control information is displayed on the information display.
AMB (Ambient Temperature) switch
Windshield defroster switch
Fan control dial Temperature control dialMode selector switch
OFF switch Auto switch
A/C switch
Air intake selector
qControl Switches
AUTO switch
By pressing the AUTO switch thefollowing functions will be automaticallycontrolled in accordance with the settemperature:
l Airflow temperature
l Amount of airflow
l Selection of airflow mode
l Outside/Recirculated air selection
l Air conditioner operation
NOTE
AUTO switch indicator light
l When on, it indicates AUTOoperation, and the system willfunction automatically.
l When off, it indicates the operationof other switches such as the modeselector switch, fan control dial, A/Cswitch and windshield defrosterswitch. Other functions will continueto operate automatically.
Interior Comfort
Climate Control System
6-11íSome models.
Mazda3_8V66-EA-06F_Edition3 Page195Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (196,1)
OFF switch
Pressing the OFF switch shuts off theclimate control system.
Temperature control dial
Cold Hot
This dial controls temperature.Turn itclockwise for hot and counterclockwisefor cold.
Fan control dial
Slow Fast
The fan has seven speeds. The selectedspeed will be displayed.
Mode selector switch
The desired airflow mode can be selected(page 6-4).
NOTE
With the airflow mode set toposition and the temperature controldial set at a medium temperature,heated air is directed to the feet and acomparably lower air temperature willflow through the central, left and rightvents.
A/C switch
With the AUTO or fan control dial ON,press the A/C switch to select the airconditioning (cooling/dehumidifyingfunctions) on or off.
NOTE
The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F). (Indicatorremains on even when system is off.)
6-12
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page196Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (197,1)
Air intake selector
Outside or recirculated air positions canbe selected. Press the switch to selectoutside/recirculated air positions.
Recirculated air position (withindicator light on)
Use this position when going throughtunnels, driving in congested traffic (highengine exhaust areas) or when quickcooling is desired.
Outside air position (with indicatorlight off)
Use this position for normal conditionsand defogging.
WARNING
Do not use the position in coldor rainy weather:Using the position in cold orrainy weather is dangerous as it willcause the windows to fog up. Yourvision will be hampered, which couldlead to a serious accident.
AMB (Ambient Temperature) switch
Press the AMB switch to display theambient temperature.
NOTE
l The displayed ambient temperaturemay vary from the actual ambienttemperature depending on thesurrounding area and vehicleconditions.
l Press the AMB switch again toswitch the display from ambienttemperature to the temperature setfor the air conditioner.
Windshield defroster switch
Press the switch to defrost the windshieldand front door windows.
Interior Comfort
Climate Control System
6-13
Mazda3_8V66-EA-06F_Edition3 Page197Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (198,1)
qOperation of Automatic AirConditioning
1. Press the AUTO switch. Selection ofthe airflow mode, air intake selectorand amount of airflow will beautomatically controlled.
2. Use the temperature control dial toselect a desired temperature.
Cold Hot
To turn off the system, press the OFFswitch.
NOTE
l Setting the temperature to maximumhigh or low will not provide thedesired temperature at a faster rate.
l When selecting heat, the system willrestrict airflow until it has warmed toprevent cold air from blowing out ofthe vents.
qWindshield Defrosting and Defogging
Press the windshield defroster switch.In this position, the position isautomatically selected, and the airconditioner automatically turns on. Theair conditioner will directly dehumidifythe air to the front windshield and sidewindows (page 6-4). Airflow amount willbe increased.
WARNING
Set the temperature control to the hotor warm position when defogging (position):Using the position with thetemperature control set to the coldposition is dangerous as it will causethe outside of the windshield to fog up.Your vision will be hampered, whichcould lead to a serious accident.
NOTE
Use the temperature control dial toincrease the air flow temperature anddefog the windshield more quickly.
6-14
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition3 Page198Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (199,1)
qSunlight/Temperature Sensor
The fully automatic air conditionerfunction measures inside and outsidetemperatures, and sunlight. It then setstemperatures inside the passengercompartment accordingly.
CAUTIONDo not obstruct either sensor, otherwisethe automatic air conditioner will notoperate properly.
Sunlight sensor
Interior temperature sensor
Interior Comfort
Climate Control System
6-15
Mazda3_8V66-EA-06F_Edition3 Page199Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (200,1)
Antenna
qDetachable Type
To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled.
Remove
InstallType A
Type B
Install
Remove
CAUTIONl To prevent damage to the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.
l Be careful around the antenna whenremoving snow from the roof.Otherwise the antenna could bedamaged.
NOTE
When leaving your vehicle unattended,we recommend that you remove theantenna and store it inside the vehicle.
6-16
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page200Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (201,1)
Operating Tips for AudioSystem
WARNINGDo not adjust the audio controlswitches while driving the vehicle:Adjusting the audio while driving thevehicle is dangerous as it coulddistract your attention from the vehicleoperation which could lead to aserious accident. Always adjust theaudio while the vehicle is stopped.Even if the audio control switches areequipped on the steering wheel, learnto use the switches without lookingdown at them so that you can keepyour maximum attention on the roadwhile driving the vehicle.
CAUTIONFor the purposes of safe driving, adjustthe audio volume to a level that allowsyou to hear sounds outside of thevehicle.
NOTE
l Do not use the audio for long periodsof time while the engine is off.Otherwise the battery could go dead.
l If a cellular phone or CB radio isused in or near the vehicle, it couldcause noise to occur from the audiosystem, however, this does notindicate that the system has beendamaged.
qRadio Reception
AM characteristics
AM signals bend around such things asbuildings or mountains and bounce off theionosphere. Therefore, they can reachlonger distances than FM signals. Becauseof this, two stations may sometimes bepicked up on the same frequency at thesame time.
Station 2Station 1
Ionosphere
FM characteristics
An FM broadcast range is usually about40―50 km (25―30 miles) from thesource. Because of extra coding needed tobreak the sound into two channels, stereoFM has even less range than monaural(non-stereo) FM.
FM Station
40—50km (25—30 miles)
Interior Comfort
Audio System
6-17
Mazda3_8V66-EA-06F_Edition3 Page201Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (202,1)
Signals from an FM transmitter are similarto beams of light because they do notbend around corners, but they do reflect.Unlike AM signals, FM signals cannottravel beyond the horizon. Therefore, FMstations cannot be received at the greatdistances possible with AM reception.
AM waveFM wave
FM wave
100—200 km (60—120 miles)
Ionosphere
Atmospheric conditions can also affectFM reception. High humidity will causepoor reception. However, cloudy daysmay provide better reception than cleardays.
Multipath noise
Since FM signals can be reflected byobstructions, it is possible to receive boththe direct signal and the reflected signal atthe same time. This causes a slight delayin reception and may be heard as a brokensound or a distortion. This problem mayalso be encountered when in closeproximity to the transmitter.
Reflected waveDirect
Flutter/Skip noise
Signals from an FM transmitter move instraight lines and become weak in valleysbetween tall buildings, mountains, andother obstacles. When a vehicle passesthrough such an area, the receptionconditions may change suddenly, resultingin annoying noise.
Weak signal noise
In suburban areas, broadcast signalsbecome weak because of distance fromthe transmitter. Reception in such fringeareas is characterized by sound breakup.
6-18
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page202Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (203,1)
Strong signal noise
This occurs very close to a transmittertower. The broadcast signals areextremely strong, so the result is noise andsound breakup at the radio receiver.
Station drift noise
When a vehicle reaches the area of twostrong stations broadcasting at similarfrequencies, the original station may betemporarily lost and the second stationpicked up. At this time there will be somenoise from this disturbance.
Station 2 88.3 MHz
Station 1 88.1 MHz
qOperating Tips for Cassette TapePlayer
Cleaning the cassette tape player
The tape head, capstans, and pinch rollerswill gather oxide residue from cassettetapes. This can cause weak or waveringsounds and damage to the cassette tapesand player. Use a good quality head-cleaning tape or a liquid cleaner cassettetape to remove it.Should the unit not operate normally,consult an Authorized Mazda Dealer.Never attempt to repair it or insert ascrewdriver or anything else.
Handling the cassette tape player
The following precautions should beobserved.
l Do not spill any liquid on the audiosystem.
l Do not insert any objects, other thancassette tape, into the slot.
Interior Comfort
Audio System
6-19
Mazda3_8V66-EA-06F_Edition3 Page203Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (204,1)
l If the cassette tape is loose, it mayproduce poor sound or performanceduring playback. Use a pencil orsomething similar to remove any slack.
l Only cassette tapes that play no longerthan 90 minutes should be used.Cassette tape exceeding 90 minutes arethin and may easily break.
l Do not leave a cassette tape in the tapeplayer slot when not in use. Remove itcompletely to permit the slot door toclose and to protect the mechanismfrom dust.
l Store cassette tapes away from extremeheat, magnetic fields, and directsunlight. Protect the exposed cassettetape from dirt and damage. Storecassette tapes in their original cases orother protective cases.
qOperating Tips for CD Player/In-Dash CD Changer
Condensation phenomenon
Immediately after turning on the heaterwhen the vehicle is cold, the CD oroptical components (prism and lens) in theCD player/In-dash CD changer maybecome clouded with condensation. Atthis time, the CD will eject immediatelywhen placed in the unit. A clouded CDcan be corrected simply by wiping it witha soft cloth. Clouded optical componentswill clear naturally in about an hour. Waitfor normal operation to return beforeattempting to use the unit.
Handling the CD player/In-dash CDchanger
The following precautions should beobserved.
l Do not spill any liquid on the audiosystem.
l Do not insert any objects, other thanCDs, into the slot.
6-20
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page204Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (205,1)
l The CD revolves at high speed withinthe unit. Defective (cracked or badlybent) CDs should never be used.
l Do not use non-conventional discssuch as heart-shaped, octagonal discs,etc. The disc may not eject resulting ina malfunction.
l If the memory portion of the CD istransparent or translucent, do not usethe disc.
Transparent
l A new CD may have rough edges onits inner and outer perimeters. If a discwith rough edges is used, propersetting will not be possible and the CDplayer/In-dash CD changer will notplay the CD. In addition, the disc maynot eject resulting in a malfunction.Remove the rough edges in advance byusing a ball-point pen or pencil asshown below. To remove the roughedges, rub the side of the pen or pencilagainst the inner and outer perimeter ofthe CD.
l When driving over uneven surfaces,the sound may jump.
l The CD player/In-dash CD changer hasbeen designed to play CDs bearing theidentification logo as shown. No otherdiscs can be played.
l Use discs that have been legitimatelyproduced. If illegally-copied discs suchas pirated discs are used, the systemmay not operate properly.
Interior Comfort
Audio System
6-21
Mazda3_8V66-EA-06F_Edition3 Page205Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (206,1)
CD Player
In-dash CD Changer
l Be sure never to touch the signalsurface when handling the CDs. Pickup a CD by grasping the outer edge orthe edge of the hole and the outer edge.
l Do not stick paper or tape on the CD.Avoid scratching the reverse side (theside without a label). The disc may noteject resulting in a malfunction.
l Dust, finger smudges, and dirt candecrease the amount of light reflectedfrom the signal surface, thus affectingsound quality. If the CD shouldbecome soiled, gently wipe it with asoft cloth from the center of the CD tothe edge.
l Do not use record sprays, antistaticagents, or household spray cleaners.Volatile chemicals such as benzine andthinner can also damage the surface ofthe CD and must not be used. Anythingthat can damage, warp, or fog plasticshould never be used to clean CDs.
l Insert discs one by one. If two discs areinserted at the same time, the systemmay not operate properly.
l CD TEXT textual information cannotbe displayed by audio units other thanthe In-dash CD changer (MP3 supporttype only). (Only playback is possible.)
l The following player can play MP3files recorded in CD-ROM, CD-R, andCD-RW.
· In-dash CD changer (MP3 filesupport type only)
l The CD player/In-dash CD changerejects the CD if the CD is insertedupside down. Also dirty and/ordefective CDs may be ejected.
l An 8 cm (3 in) CD can be played in theCD player.The In-dash CD changer is speciallymade for 12 cm (5 in) CDs.An 8 cm (3 in) CD can be played in theIn-dash CD changer (MP3 file supporttype only) if an 8 cm (3 in) CD adapteris used.If an 8 cm (3 in) CD adapter is notused, the In-dash CD changer (MP3file support type only) may bedamaged. Always use a CD adapter.An 8 cm (3 in) CD cannot be played inthe In-dash CD changer (MP3 file non-support type only) even if an 8 cm (3in) CD adapter is used.
l Do not insert cleaning discs in the CDplayer/In-dash CD changer.
6-22
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page206Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (207,1)
l Do not insert any disc with a peel-offseal affixed to it.
Handling the In-dash CD changer
l This unit may not be able to playcertain CD-R/CD-RWs made using acomputer or music CD recorder due todisc characteristics, scratches,smudges, dirt, etc., or due to dust orcondensation on the lens inside theunit.
l Storing CDs in the vehicle exposed todirect sunlight or high temperature maydamage the CD-R/CD-RWs, and makethem unplayable.
l CD-R/CD-RWexceeding 700 MBcannot be played.
l This unit may not be able to playcertain discs made using a computerdue to the application (writingsoftware) setting used. (For details,consult the store where the applicationwas purchased.)
l It is possible that certain text data, suchas titles, recorded on a CD-R/CD-RWmay not be displayed when musicaldata (CD-DA) is playing.
l The period from when a CD-RW isinserted to when it begins playing islonger than a normal CD or CD-R.
l Completely read the instruction manualand cautions for CD-R/CD-RWs.
l Do not use discs with cellophane tapeadhering, partially peeled off labels, oradhesive material exuding from theedges of the CD label. Also, do not usediscs with a commercially-availableCD-R label affixed. The disc may noteject resulting in a malfunction.
qOperating tips for MP3
NOTE
Supply of this product only conveys alicense for private, non-commercial useand does not convey a license nor implyany right to use this product in anycommercial (i.e. revenue-generating)real time broadcasting (terrestrial,satellite, cable and/or any other media),broadcasting/streaming via the Internet,intranets and/or other networks or inother electronic content distributionsystems, such as pay-audio or audio-on-demand applications. An independentlicense for such use is required. Fordetails, please visit http://www.mp3licensing.com.
l This audio system handles MP3 filesthat have been recorded on CD-R/CD-RW/CD-ROMs. Discs that have beenrecorded using the following formatscan be played:
l ISO 9660 level 1l ISO 9660 level 2l Joliet extended formatl Romeo extended format
l This unit handles MP3 filesconforming to the MP3 formatcontaining both header frames and dataframes.
l This unit can play multi-sessionrecorded discs that have up to 99sessions.
l This unit can play MP3s with samplingfrequencies of 16/22.05/24/32/44.1/48kHz.
Interior Comfort
Audio System
6-23
Mazda3_8V66-EA-06F_Edition3 Page207Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (208,1)
l This unit can play MP3 files that havebeen recorded in bit rates of 8 kbps to320 kbps. Nonetheless, to insureenjoyment of music with consistentsound quality, it is recommended to usediscs that have been recorded at a bitrate of 128 kbps or more.
l If a disc has both music data (CD-DA)and MP3 files, playback of the two filetypes differs depending on how thedisc was recorded.
l Packet written discs cannot be playedon this unit.
l This unit does not play CDs recordedusing MP3i (MP3 interactive), MP3PRO and RIFF MP3 formats.
About folders and files
l The order of hierarchy for MP3 filesand folders during playback or otherfunctions is from shallow to deep. Thearrangement and playing order of arecorded disc containing MP3 files isas follows:
l File numberA numerical file number is assignedto each file in a folder in the order ofhierarchy from shallow to deep.
l Folder numberA numerical folder number isassigned to each folder in the orderof hierarchy from shallow to deep.
05
06
0102
04
03
1
5
4
2
3
Folder No.
Level1 Level2 Level3 Level4
l The folder order is automaticallyassigned and this order cannot beoptionally set.
l Any folder without an MP3 file will beignored. (It will be skipped and thefolder number will not be displayed.)
6-24
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page208Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (209,1)
l MP3 files not conforming to the MP3format containing both header framesand data frames will be skipped andnot played.
l This unit will play MP3 files that haveup to eight levels. However, the morelevels a disc has, the longer it will taketo initially start playing. It isrecommended to record discs with twolevels or less.
l A single disc with up to 999 files canbe played and a single folder with up to255 files can be played.
l When naming an MP3 file, be sure toadd an MP3 file extension (.mp3) afterthe file name.
l The maximum number of charactersthat can be used for file names is asfollows. However, this unit will onlydisplay up to 30 characters, includingthe file extension (.mp3).
Maximum number ofcharacters in a file name(including a separator “.”and the three letters of the
file extension)
ISO9660 level 1 12*
ISO9660 level 2 31*
Joliet extendedformat
64
Romeo extendedformat
128
* English one-byte characters (capitalized only) andunderbar “_” are available.
CAUTIONThis unit can only play MP3 files thathave an MP3 file extension (.mp3)attached. Do not attach an MP3 fileextension to any other type file as itcould cause noise to be emitted or amalfunction in the unit.
About ID3 Tag display
l This unit can only display ID3 Tagalbum, track and artist names that havebeen input using Ver1.0/1.1/2.2/2.3formats. Any other data that may havebeen input cannot be displayed.
l This unit can only display English(including numerals) one-bytecharacters. Use only English (includingnumerals) one-byte characters wheninputting ID3 tags. Two-byte charactersand some special symbols cannot bedisplayed.
Specialized glossary
MP3
Abbreviation for “MPEG Audio Layer 3”.A technical standard for audiocompression as decided by an ISO(International Organization forStandardization) MPEG working group.Use of MP3 allows for audio data to becompressed to approximately a tenth ofthe source data size.
ISO 9660
An international standard for logicalformatting of CD-ROM files and folders.It is divided into three separate levelsbased on differences in file namingprocedures, data configuration and othercharacteristics.
Interior Comfort
Audio System
6-25
Mazda3_8V66-EA-06F_Edition3 Page209Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (210,1)
Multi-session
A session is the complete amount of datarecorded from the beginning to the end ofa single period of CD-ROM, CD-R/CD-RW data recording. Multi-session refers tothe existence of data from two or moresessions on a single disc.
Sampling
Refers to the process of encoding analogaudio data at regular intervals andconverting it to digital data. The samplingrate refers to the number of times asample is taken in one second and isexpressed in Hz units. Increasing thesampling rate improves the sound qualitybut also increases the data size.
Bit rate
Refers to the volume of data per second,expressed in bps (bits per second).Generally, the larger the number of thetransfer bit rate when compressing anMP3 file, the more information regardingmusical reproduction it carries, andtherefore the better the sound quality.
Packet writing
A general term for the method, similar tothat used for floppy discs or hard drives,of recording the required file in a singleincrement on a CD-R and similar.
ID3 Tag
ID3 tag is a method for storinginformation related to the music in anMP3 file. Information such as track, artistand album name can be stored. Thiscontent can be freely edited using ID3editing function software.
VBR
Abbreviation for Variable Bit Rate. WhileCBR (Constant Bit Rate) is generallyused, VBR varies the bit rate for audiocompression according to compressionconditions and this allows forcompression with preference given tosound quality.
6-26
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page210Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (211,1)
Audio Set
Audio information is displayed on the information display.
CD Player
Cassette Tape Player
Illustration is of a representative audio unit.
In-Dash CD Changer (Music CD Player)
In-Dash CD Changer (Music CD/MP3 CD Player)
Power/Volume/Sound Controls .............................................................................. page 6-28Operating the Radio ............................................................................................... page 6-30Operating the Cassette Tape Player ........................................................................ page 6-34Operating the Compact Disc (CD) Player .............................................................. page 6-36Operating the In-Dash CD Changer ....................................................................... page 6-38Error Indications ..................................................................................................... page 6-44
Interior Comfort
Audio System
6-27
Mazda3_8V66-EA-06F_Edition3 Page211Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (212,1)
qPower/Volume/Sound Controls
Audio control dialPower/Volume dial
Power ON/OFF
Turn the ignition switch to the ACC orON position.
Press the power/volume dial to turn theaudio system on.Press the power/volume dial again to turnthe audio system off.
NOTE
To prevent the battery from beingdischarged, do not leave the audiosystem on for a long period of timewhen the engine is not running.
Volume adjustment
To adjust the volume, turn the power/volume dial.
Turn the power/volume dial to the right toincrease volume, to the left to decrease it.
Audio sound adjustment
1. Press the audio control dial to select thefunction. The selected function will beindicated.
Depending on the mode selected, the indication changes.
6-28
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page212Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (213,1)
2. Turn the audio control dial to adjust theselected functions as follows:
Indication Turn Left Turn Right
Select mode
Decreasebass
Increasebass
Decreasetreble
Increasetreble
Shift thesound to the
front
Shift thesound to the
rear
Shift thesound to the
left
Shift thesound to the
right
OFF ON
OFF ON
NOTE
About 5 seconds after selecting anymode, the volume function will beautomatically selected. To reset bass,treble, fade, and balance, press theaudio control dial for 2 seconds. Theunit will beep and “CLEAR” will bedisplayed.
Automatic Level Control (ALC)
The automatic level control is a featurethat automatically adjusts audio volumeand sound quality according to the vehiclespeed.The volume increases in accordance withthe increase in vehicle speed, anddecreases as vehicle speed decreases.
The following four modes are available.Select the desired mode.
Mode Volume change
No change
Minimum
Medium
Maximum
Turn the audio control dial to select theALC OFF, ALC LEVEL1―3 mode. Theselected mode will be indicated.
BEEP setting
The beep-sound when operating the audiosystem can be set on or off.
ILLM EFT setting (Illumination settingduring operation)
The audio system illumination duringoperation can be set on or off.
Interior Comfort
Audio System
6-29
Mazda3_8V66-EA-06F_Edition3 Page213Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (214,1)
qOperating the Radio
Seek tuning buttons
Channel preset buttons
Manual tuning button/Auto memory button/Electric serial number button
Scan button
Band selector buttons
Satellite button
Radio ON
Press a band selector button ( ) toturn the radio on.
Band selection
Successively pressing the band selectorbutton ( ) switches the bands asfollows: FM1→FM2→AM.
The selected mode will be indicated. IfFM stereo is being received, “ST” will bedisplayed.
NOTE
If the FM broadcast signal becomesweak, reception automatically changesfrom STEREO to MONO for reducednoise, and the “ST” indicator will goout.
Tuning
The radio has the following tuningmethods: Manual, Seek, Scan, Presetchannel, and Auto memory tuning. Theeasiest way to tune stations is to set themon preset channels.
NOTE
If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.
Manual tuning
Turning the manual tuning dial willchange the frequency higher or lower.
6-30
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page214Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (215,1)
Seek tuning
Pressing the seek tuning button ( , )will cause the tuner to seek a higher orlower frequency automatically.
NOTE
If you continue to press and hold thebutton, the frequency will continuechanging without stopping.
Scan tuning
Press the scan button ( ) toautomatically sample strong stations.Scanning stops at each station for about 5seconds. To hold a station, press the scanbutton ( ) again during this interval.
Preset channel tuning
The 6 preset channels can be used to store6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,or FM2. Tune to the desired station.
2. Depress a channel preset button forabout 2 seconds until a beep sound isheard. The preset channel number andstation frequency will be displayed.The station is now held in the memory.
3. Repeat this operation for the otherstations and bands you want to store.To tune one in the memory, select AM,FM1, or FM2 and then press itschannel preset button. The stationfrequency and the channel number willbe displayed.
NOTE
If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.
Auto memory tuning
This is especially useful when driving inan area where the local stations are notknown. Additional AM/FM stations canbe stored without disturbing thepreviously set channels.
Press and hold the auto memory button( ) for about 2 seconds until a beepsound is heard; the system willautomatically scan and temporarily storeup to 6 stations with the strongestfrequencies in each selected band in thatarea.
After scanning is completed, the stationwith the strongest frequency will be tunedand its frequency displayed.Press and release the auto memory button( ) to recall stations from the auto-stored stations. One stored station will beselected each time; its frequency andchannel number will be displayed.
NOTE
If no stations can be tuned afterscanning operations, “A” will bedisplayed.
Interior Comfort
Audio System
6-31
Mazda3_8V66-EA-06F_Edition3 Page215Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (216,1)
SATELLITE RADIO (SAT)
Vehicles equipped with the separatelypurchased SIRIUS digital satellite radiounit have the ability to receive up to 100channels of digital quality programmingcoast to coast via satellite. For informationon use, read the Satellite Radio Kitmanual accompanying the SIRIUS digitalsatellite radio unit. A subscription toSIRIUS digital satellite radio service isrequired (available in the U.S. - ExceptAlaska and Hawaii) to enable this featureonce the separately purchased SIRIUSdigital satellite radio unit has beeninstalled. For subscription information ordigital satellite radio technical issuescontact SIRIUS directly at:
- Web: www.siriusradio.com- Phone (24 hrs/day, 7 days/week): 888-539-SIRI (7474)- E-mail: [email protected] Mailing Address: Sirius Satellite Radio1221 Avenue Of The AmericasNew York, NY 10020Attention: Customer Care
Include your Sirius Radio ESN(Electronic Serial Number) whensubscribing or requesting technicalassistance. See the Satellite Radio Kitmanual accompanying the SIRIUS unitfor complete satellite radio activationprocedures and information on how todisplay the ESN#.
6-32
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page216Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (217,1)
MEMO
6-33
Mazda3_8V66-EA-06F_Edition3 Page217Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (218,1)
qOperating the Cassette Tape Playerí
Fast-forward button
Rewind button
APC button: (next program)
(one being played)
Repeat button Cassette tape play button
Program button
Dolby NR button
Cassette tape slot
Cassette tape eject button
Cassette tape insert
Insert the cassette tape into the slot, openedge to the right and cassette tape willbegin play, and “TAPE PLAY” will bedisplayed. At the end of the cassette tape,the unit automatically reverses cassettetape play. When is lit, the cassettetape's top side is playing. When is lit,the bottom side is on.
Playing
Press the cassette tape play button( ) to start play when a cassette tapeis in the unit. If there isn't a cassette tapein the unit when the cassette tape playbutton ( ) is pressed, “NO TAPE”will flash on and off.
Dolby noise reduction
When using a tape with Dolby NR*, pushthe Dolby NR button ( ). Thesymbol will be displayed. To play a tapewithout Dolby NR, push the button onceagain.
* Noise reduction system manufacturedunder license from Dolby LaboratoriesLicensing Corporation.Dolby and the double-D symbolare trademarks of Dolby LaboratoriesLicensing Corporation.
Ejecting the cassette tape
Press the cassette tape eject button ( ) toeject the cassette tape.
6-34
Interior Comfort
íSome models.
Audio System
Mazda3_8V66-EA-06F_Edition3 Page218Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (219,1)
NOTE
The cassette tape can be ejected whenthe ignition switch is in the OFFposition.
Fast-forward/Rewind
Press the fast-forward button ( ) tofast-forward.Press the rewind button ( ) to rewind.To stop this operation and play thecassette tape, press the button again.
NOTE
When the cassette tape ends during fast-forward or rewind, it automaticallystops and starts playing.
Reversing
Press the program button ( ) tochange cassette tape-play direction.
NOTE
When the cassette tape ends, the unitautomatically reverses play.
Automatic program control (APC)
APC is used to find the beginning ofeither the next program or the one beingplayed.
Press the APC button ( ) to thebeginning of the next selection.Press the APC button ( ) to thebeginning of the one being played. Tostop this operation and play the cassettetape, press the button again.
NOTE
APC may not operate properly if:
l A tape was recorded at a low level.
l A tape has long, silent intervals.
l A tape is a live recording.
l A tape has very short intervals ofless than 3 seconds.
Repeat play
This operation makes it possible to listento a selection repeatedly.
Press the repeat button ( ) during play.The current selection playing will berepeated (“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.
NOTE
RPT may not operate properly if:
l A tape was recorded at a low level.
l A tape has long, silent intervals.
l A tape is a live recording.
l A tape has very short intervals ofless than 3 seconds.
Interior Comfort
Audio System
6-35
Mazda3_8V66-EA-06F_Edition3 Page219Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (220,1)
qOperating the Compact Disc (CD) Playerí
Track up button
Track down button
Load button
Scan button
Repeat button
CD slotCD play button CD eject button
Random button
Reverse button
Fast-forward button
Inserting the CD
Insert the CD into the slot, label-side up.The auto-loading mechanism will set theCD and begin play. There will be a shortlapse before play begins while the playerreads the digital signals on the CD.
Playing
Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.
NOTE
When the load button ( ) is pressed,the CD will load and play even if theCD eject button ( ) had beenpreviously pressed.
Ejecting the CD
Press the CD eject button ( ) to eject theCD.
Fast-forward/Reverse
Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.
Track search
Press the track up button ( ) once to skipforward to the beginning of the next track.Press the track down button ( ) once toskip back to the beginning of the currenttrack.
6-36
Interior Comfort
íSome models.
Audio System
Mazda3_8V66-EA-06F_Edition3 Page220Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (221,1)
Music scan
This feature helps to find a program byplaying about the first 10 seconds of eachtrack.
Press the scan button ( ) during playto start scan play operation (the tracknumber will flash).Press the scan button ( ) once againto cancel scan play.
NOTE
If the unit is left in scan, normal playwill resume where scan was selected.
Repeat play
This feature makes it possible to listen toa selection repeatedly.
Press the repeat button ( ) during play.The current selection will be repeated(“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.
Random play
This feature allows the CD player torandomly select the order of the songs.
Press the random button ( ) duringplay. The next selection will be randomlyselected (“RDM” will be displayed).Press the random button ( ) onceagain to cancel random play.
Interior Comfort
Audio System
6-37
Mazda3_8V66-EA-06F_Edition3 Page221Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (222,1)
qOperating the In-Dash CD Changerí
(Music CD player)
(Music CD/MP3 CD player)
Track up button
Disc up button
Disc down button
Track down button
Load button
Scan button
Repeat button
CD slotCD eject buttonCD play button
Display button
Random button
Reverse button
Fast-forward button
Channel preset buttons
There are two types of In-dash CDchangers. Check which In-dash CDchanger type you own.
Type Playable data
Music CD player · Music data (CD-DA)
Music CD/MP3 CDplayer
· Music data (CD-DA)
· MP3 file
NOTE
If a disc has both music data (CD-DA)and MP3 files, playback of the two filetypes differs depending on how the discwas recorded.
Inserting the CD
The CD must be label-side up wheninserting. The auto-loading mechanismwill set the CD and begin play. There willbe a short lapse before play begins whilethe player reads the digital signals on theCD.The disc number and the track numberwill be displayed.
6-38
Interior Comfort
íSome models.
Audio System
Mazda3_8V66-EA-06F_Edition3 Page222Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (223,1)
NOTE
The CD will begin playbackautomatically after insertion.A CD cannot be inserted while thedisplay reads “WAIT”. A beepingsound can be heard during this waitingtime. Simultaneously pressing thepower/volume dial and the load button( ) for about 2 seconds will turnthis beeping sound ON or OFF.
Normal insertion
1. Press the load button ( ).
2. When “IN” is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.
2. Press the channel preset button for thedesired tray number while “WAIT” isdisplayed.
3. When “IN” is displayed, insert the CD.
NOTE
The CD cannot be inserted to thedesired tray number if the number isalready occupied.
Multiple insertion
1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.
2. When “IN” is displayed, insert the CD.
3. When “IN” is displayed again, insertthe next CD.
NOTE
The first-inserted CD will be playedautomatically when:
l No other CD is inserted within 15seconds after “IN” is displayed.
l The CD trays are full.
Displaying the CD-inserted traynumber
When you want to know the number for aCD-inserted tray, press the display button( ). The tray number will be displayedfor 5 seconds.
Ejecting the CD
Normal ejection
1. Press the CD eject button ( ). Thedisc number and “DISC” “OUT” willbe displayed.
2. Pull out the CD.
NOTE
l When the CD is ejected during play,the next CD will be playedautomatically.
l (Music CD player)If the CD is not removed from theslot within approximately 10 secondsafter ejection, it will be re- insertedautomatically.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC” “OUT” display flashes.
Interior Comfort
Audio System
6-39
Mazda3_8V66-EA-06F_Edition3 Page223Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (224,1)
2. Press the channel preset button for thedesired CD number for less than 5seconds after the beep sound is heard.
3. Pull out the CD.
NOTE
(Music CD player)If the CD is not removed from the slotwithin approximately 10 seconds afterejection, it will be re- insertedautomatically.
Multiple ejection
1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC” “OUT” display flashes.
2. Press the CD eject button ( ) againfor less than 5 seconds after the beepsound is heard.
NOTE
If the button is not pressed and about 5seconds have elapsed while “DISC”“OUT” is flashing, CDs areautomatically ejected.
3. Pull out the CD, then the next CD willbe ejected.
NOTE
l CDs will be ejected starting with theone with the lowest number.
l All CDs in the tray will be ejectedcontinuously.
l CDs can be ejected when the ignitionswitch is off. Press and hold the CDeject button ( ) for about 2 secondsand all CDs will eject.
l (Music CD player)If the CD is not removed from theslot within approximately 10 secondsafter ejection, it will be re- insertedautomatically.
Playing
Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.
Fast-forward/Reverse
Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.
Track search
Press the track up button ( ) once to skipforward to the beginning of the next track.Press the track down button ( ) once toskip back to the beginning of the currenttrack.
Disc search
During music CD playback
To change the disc, press the DISC button( or ) during playback.
6-40
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page224Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (225,1)
During MP3 CD playback
To change the disc, press the DISC button( or ) for 1.5 seconds ormore during playback.
Folder search (during MP3 CDplayback)
To change to the previous folder, press thefolder down button ( ) for less than1.5 seconds, or press the folder up button( ) for less than 1.5 seconds toadvance to the next folder.
Music scan
This feature helps to find a program byplaying about the first 10 seconds of eachtrack.
Press the scan button ( ) during playto start scan play operation (the tracknumber will flash).Press the scan button ( ) once againto cancel scan play.
NOTE
If the unit is left in scan, normal playwill resume where scan was selected.
Repeat play
During music CD playback
1. Press the repeat button ( ) duringplayback to play the current trackrepeatedly. “RPT” is displayed.
2. Press the button again to cancel therepeat play.
During MP3 CD playback
(Track repeat)
1. Press the repeat button ( ) duringplayback to play the current trackrepeatedly. “RPT” is displayed.
2. To cancel the repeat play, press thebutton again after 3 seconds.
(Folder repeat)
1. Press the repeat button ( ) duringplayback, and then press the buttonagain within 3 seconds to play thetracks in the current folder repeatedly.“RPT” is displayed.
2. Press the button again to cancel therepeat play.
Random play
Tracks are randomly selected and played.
During music CD playback
1. Press the random button ( ) duringplayback to play the tracks in the CDrandomly. “RDM” is displayed.
2. Press the button again to cancel therandom play.
During MP3 CD playback
(Folder random)
1. Press the random button ( ) duringplayback to play the tracks in the folderrandomly. “RDM” is displayed.
2. To cancel the random play, press thebutton again after 3 seconds.
Interior Comfort
Audio System
6-41
Mazda3_8V66-EA-06F_Edition3 Page225Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (226,1)
(CD random)
1. Press the random button ( ) duringplayback, and then press the buttonagain within 3 seconds to play thetracks in the CD randomly. “RDM” isdisplayed.
2. Press the button again to cancel therandom play.
Switching the display (Music CD/MP3CD player)
Each time the display button ( ) ispressed during playback, the display willswitch in the following order.Music CD
Track number/Elapsed time display
Disc tray number
File name display
Album name display
Artist name display
MP3 CD
Folder number/Track number
Disc number/File number/Elapsed time display
Disc tray number
File name
Folder name
Album name (ID3 Tag)
Song name (ID3 Tag)
Artist name (ID3 Tag)
NOTE
(MP3 CD)
l “NO TITLE” will be displayed whenthe display is switched for a filewithout a file, track or other nameinput.
l This unit can only read English(including numerals) one-bytecharacters. If any other character isincluded, “NO TITLE” will bedisplayed. Depending on the CDwriting software used, proper displaymay not be possible.
6-42
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page226Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (227,1)
Display scroll (Music CD/MP3 CDplayer)
Only 12 characters can be displayed atone time. To display the rest of thecharacters of a long title, turn the displayfeed dial ( ) to the right. Hiddentitles can be scrolled into the display onecharacter at a time.
NOTE
The displayable number of characters islimited. If the number of characters,including the file extension (.mp3),exceeds 32 characters, it may not befully displayed.
Message display
If “CHECK CD” is displayed, it meansthat there is some CD malfunction. Checkfor damage, dirt, or smudges on the CD,and then properly reinsert. If the messageappears again, take the unit to anAuthorized Mazda Dealer for service.
qOperating the Auxiliary jack
You can connect portable audio units orsimilar products on the market to theauxiliary jack to listen to music or audioover the vehicle's speakers, refer toAuxiliary Input (page 6-47).
Interior Comfort
Audio System
6-43
Mazda3_8V66-EA-06F_Edition3 Page227Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (228,1)
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer.
Indication Cause Solution
CHECK CD
CD is inserted upside downInsert the CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer
CD is defectiveInsert another CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer
6-44
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page228Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (229,1)
Audio Control SwitchOperation (Steering Wheel)í
When the audio unit is turned on,operation of the audio unit from thesteering wheel is possible.
NOTE
Because the audio unit will be turnedoff under the following conditions, theswitches will be inoperable.
l When the ignition switch is turned tothe LOCK position.
l When the power button on the audiounit is pressed and the audio unit isturned off.
l When a cassette tape/CD beingplayed is ejected. (For the In-dashCD changer, when all CDs areejected.)
NOTE
Mazda has installed this system toprevent distraction while driving thevehicle and using audio controls on thedashboard.Always make safe driving your firstpriority.
qAdjusting the Volume
To increase the volume, press the volumebutton ( ).
To decrease the volume, press the volumebutton ( ).
Interior Comfort
Audio System
6-45íSome models.
Mazda3_8V66-EA-06F_Edition3 Page229Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (230,1)
qChanging the Source
Press the mode switch ( ) to changethe audio source (FM1 radio> FM2 radio>AM radio> CD player or CD changer>Cassette tape player> SIRIUS1>SIRIUS2> SIRIUS3> AUX> cyclical).
NOTE
Cassette tape, CD, CD changer andSIRIUS digital satellite radio modescannot be selected in the followingcases:
l A cassette deck, CD, CD changer, orSIRIUS digital satellite radio unit isnot equipped on the audio system.
l A cassette tape, or CD has not beeninserted.
Connect a portable audio unit or similarproduct on the market to the AUXterminal to listen to music or audio overthe vehicle's speakers. Change the audiosource to AUX mode (page 6-47).
qSeek Switch
When listening to the radio
Press the seek switch ( , ), the radioswitches to the next/previous storedstation in the order that it was stored(1―6).
Press the seek switch ( , ) for about 2seconds until a beep sound is heard toseek all usable stations at a higher orlower frequency whether programmed ornot.
When playing a cassette tape
Press the seek switch ( ), release, and itwill advance to the next selection.Press the seek switch ( ), release, and itwill repeat the selection being played.
When playing a CD
Press the seek switch ( ) to skip to thenext track.Press the seek switch ( ) to repeat thecurrent track.
6-46
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page230Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (231,1)
qMute Switch
Press the mute switch ( ) once to muteaudio, press it again to resume audiooutput.
NOTE
If the ignition switch is turned to theLOCK position with the audio muted,the mute will be canceled.Therefore, when the engine is restarted,the audio is not muted. To mute theaudio again, press the mute switch ( ).
Auxiliary InputYou can connect portable audio units orsimilar products on the market to theauxiliary jack to listen to music or audioover the vehicle's speakers.
Auxiliary jack
WARNINGDo not adjust the portable audio unitor a similar product while driving thevehicle:Adjusting the portable audio unit or asimilar product while driving thevehicle is dangerous as it coulddistract your attention from the vehicleoperation which could lead to aserious accident. Always adjust theportable audio unit or a similarproduct while the vehicle is stopped.
CAUTIONClose the cover when the auxiliary jackis not in use to prevent foreign objectsand liquids from getting into theauxiliary jack.
Interior Comfort
Audio System
6-47
Mazda3_8V66-EA-06F_Edition3 Page231Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (232,1)
NOTE
l Before using the auxiliary jack, readthe manufacturer's instructions forthe product being connected.
l Use a commercially-available, non-impedance (3.5 ) stereo mini plugfor connecting the portable audiounit to the auxiliary jack. Beforeusing the auxiliary jack, read themanufacture's instructions forconnecting a portable audio unit tothe auxiliary jack.
l To prevent discharging of the battery,do not use the auxiliary input forlong periods with the engine off oridling.
l Noise may occur depending on theproduct connected to the auxiliaryjack.
l If a power supply from the portableaudio unit is needed, use the unit'sbatteries. Using the power socketequipped on the vehicle may causenoise depending on the unitconnected to the power supplysocket.
Connecting the auxiliary jack
When placing portable audio units orsimilar products in the tray whileconnected to the auxiliary jack, pass theconnection plug cord through the slot inthe cap.
Cap slot, closed
Cap slot, opened
1. Open the lid by pulling the upperrelease catch.
2. Remove the tray mat.
3. Using a coin, turn the capcounterclockwise (about 45° from theclosed position) and remove it.
NOTE
Do NOT discard the cap.
6-48
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page232Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (233,1)
4. Open the tray by pulling the lowerrelease catch.
5. Pass the connection plug cord throughthe hole of the tray and insert the plugin the auxiliary jack.
Plug
WARNINGDo not allow the connection plug cordto get tangled with the parking brakeor the shift lever:Allowing the plug cord to becometangled with the parking brake or theshift lever is dangerous as it couldinterfere with driving, resulting in anaccident.
CAUTIONDo not place objects or apply force tothe auxiliary jack with the plugconnected.
NOTE
l Insert the plug to the auxiliary jacksecurely.
l Insert or remove the plug with theplug perpendicular to the auxiliaryjack hole.
l Insert or remove the plug by holdingits base.
6. Make sure the connection plug cord isrunning through the cap slot; reinstallthe cap and turn it clockwise (about45° to the opened position).
Connection plug cord
7. Pass the connection plug cord throughthe slit in the tray mat and then set thetray mat in place.
Interior Comfort
Audio System
6-49
Mazda3_8V66-EA-06F_Edition3 Page233Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (234,1)
To operate the portable audio unit
1. Turn the ignition switch to the ACC orON position.
2. Press the power/volume dial to turn theaudio system on.
3. Press the MEDIA button ( ) ofthe audio unit or the mode switch( ) of the audio control switch tochange to the AUX mode.
NOTE
l Set the volume of the portable audiounit to the maximum within therange that the sound does notbecome distorted, then adjust thevolume using the power/volume dialof the audio unit or the volumebutton ( , ) of the audio controlswitch.
l If the connection plug is pulled outfrom the auxiliary jack while inAUX mode, noise may occur.
6-50
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition3 Page234Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (235,1)
Safety CertificationThis CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance standards of the U.S. Department ofHealth and Human Services.
CAUTIONl This CD player should not be adjusted or repaired by anyone except qualified servicepersonnel.If servicing is required, contact an Authorized Mazda Dealer.
l Use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous laser exposure. Never operate the CD playerwith the top case of the unit removed.
l Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.
NOTE
For CD player section:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation.
Interior Comfort
Audio System
6-51
Mazda3_8V66-EA-06F_Edition3 Page235Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (236,1)
SunvisorsWhen you need a sunvisor, lower it foruse in front or swing it to the side.
Sunvisor
qVanity Mirrorsí
To use the vanity mirror, lower thesunvisor.
Interior Lights
qIlluminated Entry Systemí
When the illuminated entry systemoperates, the overhead light (switch is inthe DOOR position) turns on for:
l About 30 seconds after the driver'sdoor is unlocked and the ignitionswitch is in the LOCK position (withthe ignition key removed).
l About 15 seconds after all doors areclosed.
l About 15 seconds after the ignitionswitch is in the LOCK position (withthe ignition key removed) with alldoors closed.
The light also turns off when:
l The ignition switch is turned to the ONposition and all doors are closed.
l The driver's door is locked.
NOTE
Battery saverIf any door is left opened, the light goesout after about 30 minutes to save thebattery.The light turns on again when theignition switch is turned to the ONposition, or when any door is openedafter all doors have been closed.
6-52
Interior Comfort
íSome models.
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page236Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (237,1)
qOverhead Lightsí
Front
SwitchPosition
Front Overhead Lights
Light off
l Light on when any door is open
l (With illuminated entry system)Light on or off when theilluminated entry system is on
Rear
SwitchPosition
Rear Overhead Lights
Light off
l Light on when any door is open
l (With illuminated entry system)Light on or off when theilluminated entry system is on
Light on
qMap Lightsí
The map lights are switched on or off bypressing the switches.
Switches
qLuggage Compartment Light (5Door)
Interior Comfort
Interior Equipment
6-53íSome models.
Mazda3_8V66-EA-06F_Edition3 Page237Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (238,1)
SwitchPosition
Luggage Compartment Light
Light off
Light on when the liftgate is open
6-54
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page238Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (239,1)
Information Display
With trip computer
Without trip computer
Trip computer/Clock Audio displayClimate control display/Ambient temperature display
qInformation Display Functions
The information display has the following functions:
l Clock
l Ambient Temperature Display (Outside Temperature Display)í
l Climate Control Display (Fully Automatic Type)
l Audio Display
l Trip Computerí
Interior Comfort
Interior Equipment
6-55íSome models.
Mazda3_8V66-EA-06F_Edition3 Page239Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (240,1)
qClock
NOTE
When the trip computer is beingdisplayed, press the CLOCK switch tochange the display to the time.
When the ignition switch is in the ACC orON position, the time is displayed.
Time setting
NOTE
For trip computer-equipped vehicles,press the INFO switch instead of theSET switch when setting the time.
1. Press the CLOCK switch until a beepsounds, and “12Hr” and “24Hr” will bedisplayed.
2. Press the SET switch to switch between“12Hr” and “24Hr” displays. Theselected display will flash.To select the desired clock setting,press the CLOCK switch again whilethe preferred setting is flashing.
3. “Hr. ADJUST” will be displayed next,and the hour portion of the display willflash. Press the SET switch to set thehour, then press the CLOCK switch.
4. “Min. ADJUST” will be displayednext, and the minutes portion of thedisplay will flash. Press the SET switchto set the minutes, then press theCLOCK switch.
Time resetting
NOTE
For trip computer-equipped vehicles,press the INFO switch instead of theSET switch when resetting the time.
While the clock is displayed, press theSET switch 1.5 seconds or more. Whenthe switch is released, a beep will soundand the clock will be reset as follows:(Example)12:01―12:29→12:0012:30―12:59→1:00
NOTE
When the SET switch is released, theseconds are reset to “00”.
qAmbient Temperature Displayí
With fully automatic type airconditioner
When the ignition switch is in the ONposition, press the AMB switch (page6-11) on the air conditioner control panelto display the ambient temperature.Press the AMB switch again to switch thedisplay from ambient temperature to thetemperature set for the air conditioner.
6-56
Interior Comfort
íSome models.
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page240Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (241,1)
Without fully automatic type airconditioner
When the ignition switch is in the ONposition, the ambient temperature isdisplayed.
NOTE
l Under the following conditions, theambient temperature display maydiffer from the actual ambienttemperature depending on thesurroundings and vehicle conditions:
l Significantly cold or hottemperatures.
l Sudden changes in ambienttemperature.
l The vehicle is parked.l The vehicle is driven at low
speeds.
l Press the Power/volume switch andMEDIA button (page 6-28)simultaneously for 5 seconds ormore to switch the display fromFahrenheit to Centigrade or viceversa.
qClimate Control Display (FullyAutomatic Type)
The climate control system status isdisplayed. To operate the climate controlsystem, refer to “Climate Control System”(page 6-2).
qAudio Display
The audio system status is displayed. Tooperate the audio system, refer to“Audio System” (page 6-16).
qTrip Computerí
The trip computer can display thefollowing:
l The current fuel economy.
l The average fuel economy.
l The approximate distance you cantravel on the available fuel.
l The average vehicle speed.
The ignition switch must be in the ONposition.Press the INFO switch to change thedisplay mode.
NOTE
When the time is being displayed, pressthe INFO switch to change the displayto the trip computer.
If you have any problems with your tripcomputer, consult an Authorized MazdaDealer.
Interior Comfort
Interior Equipment
6-57íSome models.
Mazda3_8V66-EA-06F_Edition3 Page241Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (242,1)
Current fuel economy mode
This mode displays the current fueleconomy by calculating the amount offuel consumption and the distancetraveled.
Current fuel economy will be calculatedand displayed every 2 seconds.
When this mode is selected, CONSUMCUR will be displayed.U.S.A.
CANADA
When you've slowed to about 5 km/h (3mph), —— L/100 km (——mpg) will bedisplayed.
Average fuel economy mode
This mode displays the average fueleconomy by calculating the fuelconsumption and the distance traveledsince connecting the battery or resettingthe data.Average fuel economy will be calculatedand displayed every minute.
When this mode is selected, CONSUMAV will be displayed.U.S.A.
CANADA
To clear the data being displayed, pressthe INFO switch for more than 1 second.After pressing the INFO switch, —— L/100 km (—— mpg) will be displayed forabout 1 minute before the fuel economy isrecalculated and displayed.
6-58
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page242Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (243,1)
Distance-to-empty mode
This mode displays the approximatedistance you can travel on the remainingfuel based on the fuel economy.
The distance-to-empty will be calculatedand displayed every minutes.
When this mode is selected, REMNG willbe displayed.U.S.A.
CANADA
NOTE
l Even though the distance-to-emptydisplay may indicate a sufficientamount of remaining mileage beforerefueling is required, refuel as soonas possible if the fuel gauge needlenears E or the low fuel warning lightilluminates.
l The display won't change unless youadd more than approximately 20 L(5.3 gal) of fuel.
Average vehicle speed mode
This mode displays the average vehiclespeed by calculating the distance and thetime traveled since connecting the batteryor resetting the data.Average vehicle speed will be calculatedand displayed every 10 seconds.
When this mode is selected, AV will bedisplayed.U.S.A.
Interior Comfort
Interior Equipment
6-59
Mazda3_8V66-EA-06F_Edition3 Page243Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (244,1)
CANADA
To clear the data being displayed, pressthe INFO switch for more than 1 second.After pressing the INFO switch, ——km/h (—— mile/h) will be displayed forabout 1 minute before the vehicle speed isrecalculated and displayed.
LighterThe ignition switch must be in the ACCor ON position.Press the lighter in and release it. Whenready for use, it automatically pops out.
CAUTIONl Don't touch the metal part of thelighter, you may burn yourself.
l Don't hold the lighter in because itwill overheat.
l Don't use the lighter socket for plug-in accessories such as shavers andcoffee pots. They may damage it orcause electrical failure. Use only agenuine Mazda lighter or theequivalent.
l If the lighter doesn't pop out within30 seconds, remove it to preventoverheating.
6-60
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page244Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (245,1)
Ashtray
CAUTIONDo not use the ashtray for trash. Youmight start a fire.
To use, open the cover.
To remove, open the cover and pull up theashtray.
Cup Holder
WARNINGNever use a cup holder to hold hotliquids while the vehicle is moving:Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded.
Do not put anything other than cupsor drink cans in cup holders:Putting objects other than cups ordrink cans in a cup holder isdangerous.During sudden braking ormaneuvering, occupants could be hitand injured, or objects could bethrown around the vehicle, causinginterference with the driver and thepossibility of an accident. Only use acup holder for cups or drink cans.
CAUTIONTo reduce the possibility of injury in anaccident or a sudden stop, keep cupholders closed when not in use.
Interior Comfort
Interior Equipment
6-61
Mazda3_8V66-EA-06F_Edition3 Page245Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (246,1)
qFront
To use, open the cover.
qRear
The rear cup holder is on the rear centerarmrest.
Bottle HolderBottle holders are on the inside of thefront doors.
Bottle holder
CAUTIONDo not use the bottle holders forcontainers without caps. The contentsmay spill when the door is opened orclosed.
6-62
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page246Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (247,1)
Storage Compartments
WARNINGKeep storage boxes closed whendriving:Driving with the storage boxes open isdangerous. To reduce the possibility ofinjury in an accident or a sudden stop,keep the storage boxes closed whendriving.
CAUTIONDo not leave lighters or eyeglasses inthe storage boxes while parked underthe sun. A lighter could explode or theplastic material in eyeglasses coulddeform and crack from hightemperature.
qGlove Box
To open the glove box, pull the latchtoward you.If the glove box has a lock, insert the keyand turn it clockwise to lock,counterclockwise to unlock.
Unlock
Lock
qCenter Console
To open, pull the lower release latch.
Small items can be placed in the tray ofthe center console lid.To open it, pull the upper release latch.
qCargo Securing Loops (5 Door)
WARNINGMake sure luggage and cargo issecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury.
Interior Comfort
Interior Equipment
6-63
Mazda3_8V66-EA-06F_Edition3 Page247Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (248,1)
Use the loops in the luggage compartmentto secure cargo with a rope or net. Thetensile strength of the loops is 196 N (20kgf, 44 lbf). Do not apply excessive forceto the loops as it will damage them.
NOTE
To secure cargo with a rope or net, thetrunk board loops can be used in thesame way as the cargo securing loops(page 6-64).
qCargo Sub-Compartment (5 Door)í
With flexible floor board
To use the cargo sub-compartment,partially open or remove the trunk boards.
Trunk board
Cargo sub-compartment
Without flexible floor board
To use the cargo sub-compartment,remove or lift the trunk board.
Cargo sub-compartment
Trunk board
qFlexible Floor Board (5 Door)í
The luggage compartment can beseparated vertically and/or horizontally,using the trunk board and the trunk boardloops.
CAUTIONMake sure the trunk board is firmlysecured when it is fitted into the trunkboard loops. If it is not firmly secured,it could unexpectedly disengagecausing damage to the trunk boardloops or the trunk board.
6-64
Interior Comfort
íSome models.
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page248Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (249,1)
NOTE
The trunk board loops can be used inthe same way as the cargo securingloops. The tensile strength of the loopsis 147 N (15 kgf, 33 lbf). Do not applyexcessive force to the trunk board loopsas it will damage them (page 6-63).
Compartment divider loops
Rear trunk board
Front trunk board
To separate vertically
Use the rear trunk board to separate theluggage compartment vertically.
1. Pull the trunk board loops out.
Compartment divider loop
2. Insert the trunk board loops into thetrunk board slits.
Front
Trunk board
NOTE
To facilitate insertion of the trunk boardloops into the trunk board slits, firstinsert the bottom of the rear trunk boardinto the groove of the luggage sub-compartment.
GrooveCargo sub-compartment
3. Rock the trunk board to make sure theboard is installed securely.
To separate horizontally
Use the front trunk board to separate theluggage compartment horizontally.
Interior Comfort
Interior Equipment
6-65
Mazda3_8V66-EA-06F_Edition3 Page249Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (250,1)
CAUTIONl Do not place heavy objects on thetrunk board or apply excessive forceas they could damage the trunkboard. The permissible weight isabout 5 kg (11 lb).
l Do not use the rear trunk board toseparate the luggage compartmenthorizontally. The rear trunk boardcannot be locked to the trunk boardloops and it could move and causeinjury while the vehicle is moving.
1. Pull the trunk board loops out.
Compartment divider loop
2. Insert the trunk board loop into slit A.
Slit A
3. Insert the other trunk board loop intoslit B until a click sound is heard.
Slit B
4. Rock the trunk board to make sure theboard is installed securely.
CAUTIONDo not place or remove luggage via therear passenger seat area while thevehicle is moving. The trunk board orluggage could move and cause injury.
6-66
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page250Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (251,1)
Accessory Socketsí
The ignition switch must be in the ACCor ON position to prevent the battery fromdischarging.Only use genuine Mazda accessories orthe equivalent requiring no greater than120 W (DC 12 V, 7 A).
CAUTIONTo prevent accessory socket damage orelectrical failure, pay attention to thefollowing:
l Don't use accessories that requiremore than 120 W (DC 12 V, 7 A).
l Don't use accessories that are notgenuine Mazda accessories or theequivalent.
l Close the cover when the accessorysocket is not in use to preventforeign objects and liquids fromgetting into the accessory socket.
l Correctly insert the plug into theaccessory socket.
NOTE
To prevent discharging the battery, don'tuse the socket for long periods with theengine off or idling.
When placing an electrical device (e.g.cellular phone) in the tray which isconnected to the accessory socket, passthe connection plug cord through the slotin the cap.
Cap slot, closed
Cap slot, opened
1. Open the lid by pulling the upperrelease catch.
2. Remove the tray mat.
3. Using a coin, turn the capcounterclockwise (about 45° from theclosed position) and remove it.
NOTE
Do NOT discard the cap.
Interior Comfort
Interior Equipment
6-67íSome models.
Mazda3_8V66-EA-06F_Edition3 Page251Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (252,1)
4. Open the tray by pulling the lowerrelease catch.
5. Pass the connection plug cord throughthe hole of the tray and insert the plugin the socket.
Plug
6. Make sure the connection plug cord isrunning through the cap slot; reinstallthe cap and turn it clockwise (about45° to the opened position).
Connection plug cord
7. Pass the connection plug cord throughthe slit in the tray mat and then set thetray mat in place.
6-68
Interior Comfort
Interior Equipment
Mazda3_8V66-EA-06F_Edition3 Page252Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (253,1)
7 In Case of an Emergency
Helpful information on what to do in an emergency.
Parking in an Emergency ............................................................. 7-2Parking in an Emergency .......................................................... 7-2
Flat Tire ......................................................................................... 7-3Spare Tire and Tool Storage ...................................................... 7-3Changing a Flat Tire ................................................................. 7-7
Overheating ................................................................................. 7-13Overheating ............................................................................. 7-13
Emergency Starting .................................................................... 7-15Starting a Flooded Engine ....................................................... 7-15Jump-Starting .......................................................................... 7-16Push-Starting ........................................................................... 7-19
Emergency Towing ..................................................................... 7-20Towing Description ................................................................. 7-20Tiedown Hook ........................................................................ 7-21Recreational Towing ............................................................... 7-22
7-1
Mazda3_8V66-EA-06F_Edition3 Page253Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (254,1)
Parking in an EmergencyThe hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency.
The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.
Depress the hazard warning flasher and allthe turn signals will flash.
NOTE
l The turn signals don't work when thehazard warning lights are on.
l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.
7-2
In Case of an Emergency
Parking in an Emergency
Mazda3_8V66-EA-06F_Edition3 Page254Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (255,1)
Spare Tire and Tool StorageSpare tire and tools are stored in the locations illustrated in the diagram.
Lug wrench Jack handleTiedown eyelet
Jack
Spare tire
4 Door
In Case of an Emergency
Flat Tire
7-3
Mazda3_8V66-EA-06F_Edition3 Page255Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (256,1)
Jack
Jack handleSpare tire
Lug wrench
5 Door
Jack handle
Jack
Spare tire
Lug wrench Tiedown eyelet(Type A)
(Type B)Tiedown eyelet
7-4
In Case of an Emergency
Flat Tire
Mazda3_8V66-EA-06F_Edition3 Page256Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (257,1)
qJack
To remove the jack
1. Turn the knob and remove the cover.
2. Turn the wing bolt counterclockwise.
To secure the jack
Perform the removal procedure in reverse.
qSpare Tire
Your Mazda has a temporary spare tire.The temporary spare tire is lighter andsmaller than a conventional tire, and isdesigned only for emergency use andshould be used only for VERY shortperiods. Temporary spare tires shouldNEVER be used for long drives orextended periods.
WARNINGDo not install the temporary spare tireon the front wheels (driving wheels)when driving on ice or snow:Driving with a spare tire on the front(driving) wheels on ice or snow isdangerous. Handling will be affected.You could lose control of the vehicleand have an accident. Put the sparetire on the rear axle and move aregular tire to the front.
CAUTIONl When using the temporary spare tire,driving stability may decreasecompared to when using only theconventional tire.Drive carefully.
l To avoid damage to the temporaryspare tire or to the vehicle, observethe following precautions:
l Do not exceed 80 km/h (50 mph).l Avoid driving over obstacles.
Also, do not drive through anautomatic car wash. This tire'sdiameter is smaller than aconventional tire's, so the groundclearance is reduced about 25 mm(1 in).
l Do not use a tire chain on this tirebecause it won't fit properly.
l Do not use your temporary sparetire on any other vehicle; it hasbeen designed only for yourMazda.
l Use only one temporary spare tireon your vehicle at the same time.
In Case of an Emergency
Flat Tire
7-5
Mazda3_8V66-EA-06F_Edition3 Page257Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (258,1)
CAUTIONl (With limited slip differential)When using the temporary spare tireon the front axle, replace it with astandard tire as soon as possible. Thesize difference between the spare andthe standard tire will cause thelimited slip differential tomalfunction.
NOTE
(With Tire Pressure MonitoringSystem)A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used (page5-27).
To remove the spare tire
(4 Door)
1. Remove the trunk mat and trunk board.
2. Turn the tire hold-down boltcounterclockwise with the lug wrench.
(5 Door)
1. Remove the trunk mat, trunk board andcargo sub-compartment.
(Type A) (Type B)
2. Turn the tire hold-down boltcounterclockwise with the lug wrench.
7-6
In Case of an Emergency
Flat Tire
Mazda3_8V66-EA-06F_Edition3 Page258Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (259,1)
Changing a Flat Tire
NOTE
If the following occurs while driving, itcould indicate a flat tire.
l Steering becomes difficult.
l The vehicle begins to vibrateexcessively.
l The vehicle pulls in one direction.
If you have a flat tire, drive slowly to alevel spot that is well off the road and outof the way of traffic to change the tire.Stopping in traffic or on the shoulder of abusy road is dangerous.
WARNINGBe sure to follow the directions forchanging a tire, and never get under avehicle that is supported only by ajack:Changing a tire is dangerous if notdone properly. The vehicle can slip offthe jack and seriously injure someone.
Never allow anyone inside a vehiclesupported by a jack:Allowing someone to remain in avehicle supported by a jack isdangerous. The occupant could causethe vehicle to fall resulting in seriousinjury.
CAUTION(With Tire Pressure MonitoringSystem)The wheels equipped on your Mazdaare specially designed for installation ofthe tire pressure sensors. Do not usenon-genuine wheels, otherwise it maynot be possible to install the tirepressure sensors.
NOTE
l Make sure the jack is well lubricatedbefore using it.
(With Tire Pressure MonitoringSystem)
l Be sure to register the tire pressuresensor ID signal code whenever tiresor wheels are changed (page 5-29).
1. Park on a level surface off the right-of-way and firmly set the parking brake.
2. Put a vehicle with an automatictransaxle in Park (P), a manualtransaxle in Reverse (R) or 1, and turnoff the engine.
3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicleand away from the vehicle and traffic.
5. Remove the jack, tool, and spare tire(page 7-3).
In Case of an Emergency
Flat Tire
7-7
Mazda3_8V66-EA-06F_Edition3 Page259Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (260,1)
6. Block the wheel diagonally oppositethe flat tire. When blocking a wheel,place a tire block both in front andbehind the tire.
NOTE
When blocking a tire, use rocks orwood blocks of sufficient size to holdthe tire in place.
qRemoving a Flat Tire
1. If your vehicle is equipped with awheel cover, pry off the wheel coverwith the beveled end of the lug wrench.
NOTE
Force the end of the lug wrench firmlybetween wheel and cover, or removalwill be difficult.
CAUTIONThere is a valve-stem mark inside thewheel cover. When installing the wheelcover, align this mark with the tire'svalve stem.Damage could occur during installationif the wheel cover is not properlyaligned.
2. Loosen the lug nuts by turning themcounterclockwise one turn each, butdon't remove any lug nuts until the tirehas been raised off the ground.
7-8
In Case of an Emergency
Flat Tire
Mazda3_8V66-EA-06F_Edition3 Page260Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (261,1)
3. Place the jack under the jackingposition closest to the tire beingchanged.
Jacking position
WARNINGUse only the front and rear jackingpositions recommended in thismanual:Attempting to jack the vehicle inpositions other than thoserecommended in this manual isdangerous. The vehicle could slip offthe jack and seriously injure or evenkill someone. Use only the front andrear jacking positions recommendedin this manual.
Use only the jack provided with yourMazda:Using a jack that is not designed foryour Mazda is dangerous. The vehiclecould slip off the jack and seriouslyinjure someone.
Never place objects under the jack:Jacking the vehicle with an objectunder the jack is dangerous. The jackcould slip and someone could beseriously injured by the jack or thefalling vehicle.
4. Insert the jack handle into the jack.
5. Turn the jack handle clockwise andraise the vehicle high enough so thatthe spare tire can be installed. Beforeremoving the lug nuts, make sure yourMazda is firmly in position and that itcannot slip or move.
6. Remove the lug nuts by turning themcounterclockwise; then remove thewheel and center cap.
In Case of an Emergency
Flat Tire
7-9
Mazda3_8V66-EA-06F_Edition3 Page261Wednesday, August 23 2006 11:20 AM
Form No.8V66-EA-06F
Black plate (262,1)
qLocking Lug Nutsí
If your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling out the cardprovided in the glove box and mailing itin the accompanying envelope. If you losethis key, consult an Authorized MazdaDealer or use the lock manufacturer'sorder form, which is with the registrationcard.
Special keyAntitheft lug nut
To remove an antitheft lug nut
1. Obtain the key for the antitheft lug nut.
2. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.
3. Place the lug wrench on top of the keyand apply pressure. Turn the wrenchcounterclockwise.
To install the nut
1. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.
2. Place the lug wrench on top of the key,apply pressure, and turn it clockwise.
qMounting the Spare Tire
1. Remove dirt and grime from themounting surfaces of the wheel andhub, including the hub bolts, with acloth.
WARNINGMake sure the mounting surfaces ofthe wheel, hub and lug nuts are cleanbefore changing or replacing tires:When changing or replacing a tire,not removing dirt and grime from themounting surfaces of the wheel, huband hub bolts is dangerous. The lugnuts could loosen while driving andcause the tire to come off, resulting inan accident.
2. Mount the spare tire.
7-10
In Case of an Emergency
íSome models.
Flat Tire
Mazda3_8V66-EA-06F_Edition3 Page262Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (263,1)
3. Install the lug nuts with the bevelededge inward; tighten them by hand.
WARNINGDo not apply oil or grease to lug nutsand bolts and do not tighten the lugnuts beyond the recommendedtightening torque:Applying oil or grease to lug nuts andbolts is dangerous. The lug nuts couldloosen while driving and cause the tireto come off, resulting in an accident.In addition, lug nuts and bolts couldbe damaged if tightened more thannecessary.
4. Turn the jack handle counterclockwiseand lower the vehicle. Use the lugwrench to tighten the nuts in the ordershown.
If you're unsure of how tight the nutsshould be, have them inspected at anAuthorized Mazda Dealer.
Nut tightening torque
N·m (kgf·m, ft·lbf) 89―117 (9―12, 66―86)
WARNINGAlways securely and correctly tightenthe lug nuts:Improperly or loosely tightened lugnuts are dangerous. The wheel couldwobble or come off. This could resultin loss of vehicle control and cause aserious accident.
Be sure to reinstall the same nuts youremoved or replace them with metricnuts of the same configuration:Because the wheel studs and lug nutson your Mazda have metric threads,using a non-metric nut is dangerous.On a metric stud, it would not securethe wheel and would damage the stud,which could cause the wheel to slip offand cause an accident.
In Case of an Emergency
Flat Tire
7-11
Mazda3_8V66-EA-06F_Edition3 Page263Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (264,1)
5. Store the damaged tire, using the tirehold-down bolt to hold it in place.
Tire clamp Tire hold-down bolt
6. Check the inflation pressure. Refer tothe specification charts on page 10-8.
7. Have the flat tire repaired or replacedas soon as possible.
WARNINGDo not drive with any tires that haveincorrect air pressure:Driving on tires with incorrect airpressure is dangerous. Tires withincorrect pressure could affecthandling and result in an accident.When you check the regular tires' airpressure, check the spare tire, too.
NOTE
(With Tire Pressure MonitoringSystem)A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used (page5-27).
NOTE
To prevent the jack and tool fromrattling, store them properly.
7-12
In Case of an Emergency
Flat Tire
Mazda3_8V66-EA-06F_Edition3 Page264Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (265,1)
OverheatingIf the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot.
WARNING
Turn off the ignition switch andmake sure the fan is not runningbefore attempting to work near thecooling fan:Working near the cooling fan when itis running is dangerous. The fancould continue running indefinitelyeven if the engine has stopped and theengine compartment temperature ishigh. You could be hit by the fan andseriously injured.
Do not remove the coolingsystem cap when the engine andradiator are hot:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury.
Open the hood ONLYafter steam is nolonger escaping from the engine:Steam from an overheated engine isdangerous. The escaping steam couldseriously burn you.
If the temperature gauge indicatesoverheating:
1. Drive safely to the side of the road andpark off the right-of-way.
2. Put a vehicle with an automatictransaxle in park (P), a manualtransaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam isescaping from under the hood or fromthe engine compartment.
If steam is coming from the enginecompartment:Don't go near the front of the vehicle.Stop the engine.Wait until the steam dissipates, thenopen the hood and start the engine.
If neither coolant nor steam isescaping:Open the hood and idle the engine untilit cools.
CAUTIONIf the cooling fan does not operatewhile the engine is running, the enginetemperature will increase. Stop theengine and call an Authorized MazdaDealer.
6. Make sure the cooling fan is operating,then turn off the engine after thetemperature has decreased.
7. When cool, check the coolant level.If it's low, look for coolant leaks fromthe radiator and hoses.
In Case of an Emergency
Overheating
7-13
Mazda3_8V66-EA-06F_Edition3 Page265Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (266,1)
If you find a leak or other damage, or ifcoolant is still leaking:Stop the engine and call an AuthorizedMazda Dealer.
Except L3 turbocharger engine
L3 turbocharger engine
If you find no problems, the engine iscool, and no leaks are obvious:Carefully add coolant as required (page8-21).
CAUTIONIf the engine continues to overheat orfrequently overheats, have the coolingsystem inspected. The engine could beseriously damaged unless repairs aremade. Consult an Authorized MazdaDealer.
7-14
In Case of an Emergency
Overheating
Mazda3_8V66-EA-06F_Edition3 Page266Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (267,1)
Starting a Flooded EngineIf the engine fails to start, it may beflooded (excessive fuel in the engine).
Follow this procedure:
1. Depress the accelerator all the way andhold it there.
2. Turn the ignition switch to the STARTposition and hold it there―for up to 10seconds. If the engine starts, release thekey and accelerator immediatelybecause the engine will suddenly revup.
3. If the engine fails to start, crank itwithout depressing the accelerator―forup to 10 seconds.
In Case of an Emergency
Emergency Starting
7-15
Mazda3_8V66-EA-06F_Edition3 Page267Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (268,1)
Jump-StartingJump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work.
WARNING
Follow These Precautions Carefully:To ensure safe and correct handling of the battery, read the following precautionscarefully before using the battery or inspecting it.
Always wear eye protection when working near the battery:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode.
Wear eye protection and protective gloves to prevent contact with battery fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin.
Do not allow the positive ( ) terminal to contact any other metal object thatcould cause sparks:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. When working near a battery,do not allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery.
7-16
In Case of an Emergency
Emergency Starting
Mazda3_8V66-EA-06F_Edition3 Page268Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (269,1)
WARNING
Keep all flames, including cigarettes, and sparks away from open battery cells:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low fluid level:Jump-starting a frozen battery or one with a low fluid level is dangerous. It mayrupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the battery:Connecting the end of the second jumper cable to the negative ( ) terminal of thedischarged battery is dangerous.A spark could cause the gas around the battery to explode and injure someone.
Route the jumper cables away from parts that will be moving:Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.The cable could get caught when the engine starts and cause serious injury.
CAUTIONUse only a 12 V booster system. You can damage a 12 V starter, ignition system, andother electrical parts beyond repair with a 24 V power supply (two 12 V batteries inseries or a 24 V motor generator set).
In Case of an Emergency
Emergency Starting
7-17
Mazda3_8V66-EA-06F_Edition3 Page269Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (270,1)
Discharged battery
Jumper cables
Connect cables in numerical order and disconnect in reverse order.
Booster battery
1. Remove the battery cover from its frontside.
Battery cover
2. Make sure the booster battery is 12 Vand that its negative terminal isgrounded.
3. If the booster battery is in anothervehicle, don't allow both vehicles totouch. Turn off the engine of thevehicle with the booster battery and allunnecessary electrical loads in bothvehicles.
4. Connect the jumper cables in the exactsequence as in the illustration.
l Connect one end of a cable to thepositive terminal on the dischargedbattery (1).
l Attach the other end to the positiveterminal on the booster battery (2).
l Connect one end of the other cableto the negative terminal of thebooster battery (3).
l Connect the other end to a solid,stationary, exposed metallic point(for example, the right hand sideengine mounting bolt) away fromthe discharged battery (4).
5. Start the engine of the booster vehicleand run it a few minutes. Then start theengine of the other vehicle.
6. When finished, carefully disconnect thecables in the reverse order described inthe illustration.
7-18
In Case of an Emergency
Emergency Starting
Mazda3_8V66-EA-06F_Edition3 Page270Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (271,1)
NOTE
Verify that the covers are securelyinstalled.
Push-StartingDo not push-start your Mazda.
WARNINGNever tow a vehicle to start it:Towing a vehicle to start it isdangerous. The vehicle being towedcould surge forward when its enginestarts, causing the two vehicles tocollide. The occupants could beinjured.
CAUTIONDo not push-start a vehicle that has amanual transaxle. It can damage theemission control system.
NOTE
You can't start a vehicle with anautomatic transaxle by pushing it.
In Case of an Emergency
Emergency Starting
7-19
Mazda3_8V66-EA-06F_Edition3 Page271Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (272,1)
Towing DescriptionWe recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service.
Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed.
A towed vehicle usually should have itsdrive wheels (front wheels) off theground. If excessive damage or otherconditions prevent this, use wheel dollies.
Wheel dollies
When towing with the rear wheels on theground, release the parking brake.
CAUTIONDon't tow the vehicle pointed backwardwith driving wheels on the ground. Thismay cause internal damage to thetransaxle.
CAUTIONDon't tow with sling-type equipment.This could damage your vehicle. Usewheel-lift or flatbed equipment.
7-20
In Case of an Emergency
Emergency Towing
Mazda3_8V66-EA-06F_Edition3 Page272Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (273,1)
CAUTIONDo not use the hooks under the rearbumper for towing and tying down, asthey cannot hold the load and it willdamage the bumper.
Hooks
Tiedown Hook
CAUTIONDon't use the tiedown hook under therear for towing.It is designed ONLY for tying down thevehicle when it's being transported.Using it for towing will damage thebumper.
qTiedown Hook-Front
1. Remove the tiedown eyelet and the lugwrench from the trunk (page 7-3).
2. Wrap the lug wrench with a soft clothto prevent damage to the bumper andopen the cap located on the frontbumper.
CAUTIONThe cap cannot be completely removed.Do not use excessive force as it maydamage the cap or scratch the paintedbumper surface.
In Case of an Emergency
Emergency Towing
7-21
Mazda3_8V66-EA-06F_Edition3 Page273Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (274,1)
3. Securely install the tiedown eyeletusing the lug wrench.
Lug wrench
4. Hook the tying rope to the tiedowneyelet.
CAUTIONIf the tiedown eyelet is not securelytightened, it may loosen or disengagefrom the bumper when tying down thevehicle. Make sure that the tiedowneyelet is securely tightened to thebumper.
Recreational TowingAn example of “recreational towing” istowing your vehicle behind a motorhome.The transaxle is not designed for towingthis vehicle on all 4 wheels.When doing recreational towing refer to“Towing Description” (page 7-20) and“Tiedown Hook” (page 7-21) andcarefully follow the instructions.
7-22
In Case of an Emergency
Emergency Towing
Mazda3_8V66-EA-06F_Edition3 Page274Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (275,1)
8 Maintenance and Care
How to keep your Mazda in top condition.
Introduction .................................................................................. 8-2Introduction ............................................................................... 8-2
Scheduled Maintenance ................................................................ 8-3Scheduled Maintenance (USA, Canada, and Puerto Rico) ....... 8-3Scheduled Maintenance (Mexico) ............................................. 8-8
Owner Maintenance ................................................................... 8-15Owner Maintenance Schedule ................................................ 8-15Owner Maintenance Precautions ............................................. 8-16Engine Compartment Overview .............................................. 8-17Engine Oil ............................................................................... 8-18Engine Coolant ....................................................................... 8-21Brake/Clutch Fluid .................................................................. 8-23Power Steering Fluid ............................................................... 8-24Automatic Transaxle Fluid (ATF)í ........................................ 8-25Washer Fluid ........................................................................... 8-28Body Lubrication .................................................................... 8-29Wiper Blades ........................................................................... 8-29Battery ..................................................................................... 8-33Tires ........................................................................................ 8-36Light Bulbs ............................................................................. 8-41Fuses ....................................................................................... 8-52
Appearance Care ........................................................................ 8-60How to Minimize Environmental Paint Damage .................... 8-60Exterior Care ........................................................................... 8-62Interior Care ............................................................................ 8-65
8-1íSome models.
Mazda3_8V66-EA-06F_Edition3 Page275Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (276,1)
IntroductionBe extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.Without this expertise and the parts that have been designed and made especially for yourMazda, inadequate, incomplete, and insufficient servicing may result in problems. Thiscould lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed asprescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to defectivematerials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment mayperform maintenance. But we recommend that it always be done by an AuthorizedMazda Dealer using genuine Mazda parts.
8-2
Maintenance and Care
Introduction
Mazda3_8V66-EA-06F_Edition3 Page276Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (277,1)
Scheduled Maintenance (USA, Canada, and Puerto Rico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
l Repeated short-distance driving
l Driving in dusty conditions
l Driving with extended use of brakes
l Driving in areas where salt or other corrosive materials are being used
l Driving on rough or muddy roads
l Extended periods of idling or low-speed operation
l Driving for long periods in cold temperatures or extremely humid climates
NOTE
After the prescribed period, continue to follow the described maintenance at therecommended intervals.
Maintenance and Care
Scheduled Maintenance
8-3
Mazda3_8V66-EA-06F_Edition3 Page277Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (278,1)
qSchedule 1
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months 6 12 18 24 30 36 42 48
×1000 km 12 24 36 48 60 72 84 96
×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60
ENGINE
Engine valve clearanceAudible inspect every 120,000 km (75,000 miles), if noisy,
adjust
Drive belts (tension) I
Engine oil R R R R R R R R
Engine oil filter R R R R R R R R
COOLING SYSTEM
Cooling system I I
Engine coolantFL22 type *1 Replace at first 192,000 km (120,000 miles) or 10 years; after
that, every 96,000 km (60,000 miles) or 5 years
OthersReplace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
FUEL SYSTEM
Air filter R
Fuel lines and hoses *2 I I
Hoses and tubes for emission *2 I
IGNITION SYSTEM
Spark plugs Replace every 120,000 km (75,000 miles)
CHASSIS and BODY
Brake lines, hoses and connections I I
Disc brakes I I I I
Tire (Rotation) Rotate every 12,000 km (7,500 miles)
Steering operation and linkages I I
Front and rear suspension, ball joints and wheelbearing axial play
I I
Driveshaft dust boots I I
Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 5 years
All locks and hinges L L L L L L L L
Bolts and nuts on chassis and body T T
8-4
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page278Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (279,1)
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months 6 12 18 24 30 36 42 48
×1000 km 12 24 36 48 60 72 84 96
×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60
AIR CONDITIONER SYSTEM (if installed)
Cabin air filter Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateT: Tighten*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.
Maintenance and Care
Scheduled Maintenance
8-5
Mazda3_8V66-EA-06F_Edition3 Page279Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (280,1)
qSchedule 2
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months 4 8 12 16 20 24 28 32 36 40 44 48
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96
×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60
ENGINE
Engine valve clearanceAudible inspect every 120,000 km (75,000 miles), if noisy,
adjust
Drive belts (tension) I
Engine oilPuerto Rico Replace every 5,000 km (3,000 miles) or 3 months
Others R R R R R R R R R R R R
Engine oil filter R R R R R R R R R R R R
COOLING SYSTEM
Cooling system I I
Engine coolantFL22 type *1 Replace at first 192,000 km (120,000 miles) or 10 years; after
that, every 96,000 km (60,000 miles) or 5 years
OthersReplace at first 96,000 km (60,000 miles) or 4 years; after that,
every 2 years
Engine coolant level I I I I I I I I I I I I
FUEL SYSTEM
Air filerPuerto Rico R R
Others R
Fuel lines and hoses *2 I I
Hoses and tubes for emission *2 I
IGNITION SYSTEM
Spark plugs (without turbocharger) Replace every 120,000 km (75,000 miles)
Spark plugs (with turbocharger)USA Replace every 96,000 km (60,000 miles)
Others *3 Replace every 120,000 km (75,000 miles)
ELECTRICAL SYSTEM
Function of all lights I I I I I I I I I I I I
8-6
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page280Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (281,1)
Maintenance Interval
Number of months or kilometers (miles), whichever comes first
Months 4 8 12 16 20 24 28 32 36 40 44 48
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96
×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60
CHASSIS and BODY
Brake lines, hoses and connections I I
Brake and clutch fluid level I I I I I I I I I I I I
Disc brakes I I I I
Tire (Rotation) Rotate every 8,000 km (5,000 miles)
Tire inflation pressure and tire wear I I I I I I I I I I I I
Steering operation and linkages I I
Power steering fluid level I I I I I I I I I I I I
Front and rear suspension, ball joints and wheelbearing axial play
I I
Driveshaft dust boots I I
Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 5 years
All locks and hinges L L L L L L L L L L L L
Washer fluid level I I I I I I I I I I I I
Bolts and nuts on chassis and body T T
AIR CONDITIONER SYSTEM (if installed)
Cabin air filter Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateT: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surroundingarea. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.
*3 If the vehicle is operated under any of the following conditions, replace the spark plugs every 96,000 km(60,000 miles) or shorter.a) Repeated short-distance drivingb) Extended periods of idling or low-speed operationc) Driving for long periods in cold temperatures or extremely humid climates
Maintenance and Care
Scheduled Maintenance
8-7
Mazda3_8V66-EA-06F_Edition3 Page281Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (282,1)
Scheduled Maintenance (Mexico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2.
l Repeated short-distance driving
l Driving in dusty conditions
l Driving with extended use of brakes
l Driving in areas where salt or other corrosive materials are being used
l Driving on rough or muddy roads
l Extended periods of idling or low-speed operation
l Driving for long periods in cold temperatures or extremely humid climates
l Driving in extremely hot conditions
l Driving in mountainous conditions continually
NOTE
After the prescribed period, continue to follow the described maintenance at therecommended intervals.
8-8
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page282Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (283,1)
qSchedule 1
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 6 12 18 24 30 36 42 48 54 60 66 72
×1000 km 10 20 30 40 50 60 70 80 90 100 110 120
ENGINE
Engine valve clearance Audible inspect every 120,000 km, if noisy, adjust
Drive belts (tension) I I I
Engine oil R R R R R R R R R R R R
Engine oil filter R R R R R R R R R R R R
COOLING SYSTEM
Cooling system I I I
Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years;
after that, every 60,000 km or 3 years
Others Replace every 40,000 km or 2 years
FUEL SYSTEM
Air filter R R R R R R
Fuel lines and hoses I *2 I *2 I
Hoses and tubes for emission I *2 I *2 I
Fuel filter R R R
IGNITION SYSTEM
Spark plugs Replace every 60,000 km
CHASSIS and BODY
Brake lines, hoses and connections I I I I I I
Brake and clutch fluid level I I I I I I I I I
Brake fluid R R R
Disc brakes I I I I I I I I I I I I
Tire (Rotation) Rotate every 10,000 km
Tire inflation pressure and tire wear I I I I I I I I I I I I
Steering operation and linkages I I I I I I I I I I I I
Power steering fluid level I I I I I I I I I I I I
Front and rear suspension, ball joints and wheelbearing axial play
I I I I I I
Driveshaft dust boots I I I I I I
Exhaust system and heat shields I I I I I I
All locks and hinges L L L L L L L L L L L L
Washer fluid level I I I I I I I I I I I I
Bolts and nuts on chassis and body T T T T T T
Maintenance and Care
Scheduled Maintenance
8-9
Mazda3_8V66-EA-06F_Edition3 Page283Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (284,1)
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 6 12 18 24 30 36 42 48 54 60 66 72
×1000 km 10 20 30 40 50 60 70 80 90 100 110 120
AIR CONDITIONER SYSTEM (if installed)
Cabin air filter R R R
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateT: Tighten*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or kilometer period to ensure long-term reliability.
8-10
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page284Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (285,1)
qSchedule 2
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 3 6 9 12 15 18 21 24 27 30 33 36
×1000 km 5 10 15 20 25 30 35 40 45 50 55 60
ENGINE
Engine valve clearance Audible inspect every 120,000 km, if noisy, adjust
Drive belts (tension) I
Engine oil R R R R R R R R R R R R
Engine oil filter R R R R R R R R R R R R
COOLING SYSTEM
Cooling system I
Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
Others Replace every 40,000 km or 2 years
Engine coolant level I I I I I I I I I I I I
FUEL SYSTEM
Air filter C R C R C R
Fuel lines and hoses I *2
Hoses and tubes for emission I *2
Fuel filter R
IGNITION SYSTEM
Spark plugs Replace every 60,000 km
ELECTRICAL SYSTEM
Function of all lights I I I I I I I I I I I I
CHASSIS and BODY
Brake lines, hoses and connections I I I
Brake and clutch fluid level I I I I I
Brake fluid R
Disc brakes I I I I I I
Tire (Rotation) Rotate every 10,000 km
Tire inflation pressure and tire wear I I I I I I
Steering operation and linkages I I I I I I
Power steering fluid level I I I I I I
Front and rear suspension, ball joints and wheelbearing axial play
I I I
Driveshaft dust boots I I I
Exhaust system and heat shields I I I
All locks and hinges L L L L L L
Washer fluid level I I I I I I
Bolts and nuts on chassis and body T T T
Maintenance and Care
Scheduled Maintenance
8-11
Mazda3_8V66-EA-06F_Edition3 Page285Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (286,1)
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 3 6 9 12 15 18 21 24 27 30 33 36
×1000 km 5 10 15 20 25 30 35 40 45 50 55 60
AIR CONDITIONER SYSTEM (if installed)
Cabin air filter R R R
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: CleanT: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surroundingarea. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or kilometer period to ensure long-term reliability.
8-12
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page286Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (287,1)
(Cont.)
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 39 42 45 48 51 54 57 60 63 66 69 72
×1000 km 65 70 75 80 85 90 95 100 105 110 115 120
ENGINE
Engine valve clearance Audible inspect every 120,000 km, if noisy, adjust
Drive belts (tension) I I
Engine oil R R R R R R R R R R R R
Engine oil filter R R R R R R R R R R R R
COOLING SYSTEM
Cooling system I I
Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every
60,000 km or 3 years
Others Replace every 40,000 km or 2 years
Engine coolant level I I I I I I I I I I I I
FUEL SYSTEM
Air filter C R C R C R
Fuel lines and hoses I *2 I
Hoses and tubes for emission I *2 I
Fuel filter R R
IGNITION SYSTEM
Spark plugs Replace every 60,000 km
ELECTRICAL SYSTEM
Function of all lights I I I I I I I I I I I I
CHASSIS and BODY
Brake lines, hoses and connections I I I
Brake and clutch fluid level I I I I
Brake fluid R R
Disc brakes I I I I I I
Tire (Rotation) Rotate every 10,000 km
Tire inflation pressure and tire wear I I I I I I
Steering operation and linkages I I I I I I
Power steering fluid level I I I I I I
Front and rear suspension, ball joints and wheelbearing axial play
I I I
Driveshaft dust boots I I I
Exhaust system and heat shields I I I
All locks and hinges L L L L L L
Washer fluid level I I I I I I
Bolts and nuts on chassis and body T T T
Maintenance and Care
Scheduled Maintenance
8-13
Mazda3_8V66-EA-06F_Edition3 Page287Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (288,1)
Maintenance Interval
Number of months or kilometers, whichever comes first
Months 39 42 45 48 51 54 57 60 63 66 69 72
×1000 km 65 70 75 80 85 90 95 100 105 110 115 120
AIR CONDITIONER SYSTEM (if installed)
Cabin air filter R R R
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: CleanT: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surroundingarea. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or kilometer period to ensure long-term reliability.
8-14
Maintenance and Care
Scheduled Maintenance
Mazda3_8V66-EA-06F_Edition3 Page288Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (289,1)
Owner Maintenance ScheduleThe owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon as possible.
qWhen Refueling
l Brake and clutch fluid level (page 8-23)
l Engine coolant level (page 8-21)
l Engine oil level (page 8-20)
l Washer fluid level (page 8-28)
qAt Least Monthly
Tire inflation pressures (page 8-36)
qAt Least Twice a Year (For Example, Every Spring and Fall)
l Automatic transaxle fluid level (page 8-25)
l Power steering fluid level (page 8-24)
You can do the following scheduled maintenance items if you have some mechanicalability and a few basic tools and if you closely follow the directions in this manual.
l Engine coolant (page 8-21)
l Engine oil (page 8-18)
Maintenance and Care
Owner Maintenance
8-15
Mazda3_8V66-EA-06F_Edition3 Page289Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (290,1)
Owner Maintenance PrecautionsImproper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform.
As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.For details, read the separate Mazda Warranty statement provided with the vehicle. Ifyou're unsure about any servicing or maintenance procedure, have it done by anAuthorized Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Pleasedispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an AuthorizedMazda Dealer.
WARNINGDo not perform maintenance work if you lack sufficient knowledge and experience orthe proper tools and equipment to do the work. Have maintenance work done by aqualified technician:Performing maintenance work on a vehicle is dangerous if not done properly. You canbe seriously injured while performing some maintenance procedures.
If you must run the engine while working under the hood, make certain that youremove all jewelry (especially rings, bracelets, watches, and necklaces) and allneckties, scarves, and similar loose clothing before getting near the engine or coolingfan which may turn on unexpectedly:Working under the hood with the engine running is dangerous. It becomes even moredangerous when you wear jewelry or loose clothing.Either can become entangled in moving parts and result in injury.
Turn off the ignition switch and make sure the fan is not running before attempting towork near the cooling fan:Working near the cooling fan when it is running is dangerous. The fan could continuerunning indefinitely even if the engine has stopped and the engine compartmenttemperature is high. You could be hit by the fan and seriously injured.
8-16
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page290Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (291,1)
Engine Compartment Overview
Main fuse
Automatic transaxle fluid-level dipstick (Only for automatic transaxle)
Brake/Clutch fluid reservoir
Engine coolant reservoir
Engine oil dipstick
Power steering fluid reservoir
Windshield washer fluid reservoir
Engine oil-filler cap Battery Fuse block
Without turbocharger
Main fuse
Brake/Clutch fluid reservoir
Engine coolant reservoir
Engine oil dipstick
Power steering fluid reservoir
Windshield washer fluid reservoir
Engine oil-filler cap BatteryFuse block
With turbocharger
Maintenance and Care
Owner Maintenance
8-17
Mazda3_8V66-EA-06F_Edition3 Page291Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (292,1)
Engine Oil
NOTE
Changing the engine oil should be doneby an Authorized Mazda Dealer.
qRecommended Oil
Use SAE 5W-20 engine oil (Withoutturbocharger).Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to overcome enginefriction.
U.S.A. and CANADA
(ILSAC)
Only use oils “Certified For GasolineEngines” by the American PetroleumInstitute (API). An oil with this trademarksymbol conforms to the current engineand emission system protection standardsand fuel economy requirements of theInternational Lubricant Standardizationand Approval Committee (ILSAC),comprised of U.S. and Japaneseautomobile manufacturers.
5W-20
120100806040200–20
50403020100–10–20–30
Except U.S.A. and CANADA
(ILSAC)
Use SAE 5W-20 engine oil. If SAE 5W-20 engine oil is not available in your market. Use SAE 5W-30 engine oil.
Mexico
8-18
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page292Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (293,1)
The quality designation SM, or ILSACmust be on the label.
5W-20
120100806040200–20
50403020100–10–20–30
Use SAE 5W-30 engine oil (Withturbocharger).Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to overcome enginefriction.
U.S.A. and CANADA
(ILSAC)
Only use oils “Certified For GasolineEngines” by the American PetroleumInstitute (API). An oil with this trademarksymbol conforms to the current engineand emission system protection standardsand fuel economy requirements of theInternational Lubricant Standardizationand Approval Committee (ILSAC),comprised of U.S. and Japaneseautomobile manufacturers.
–30 –20 –10 0 10 20 30 40 50
–20 0 20 40 60 80 100 120
5W-30
Except U.S.A. and CANADA
(ILSAC)
Maintenance and Care
Owner Maintenance
8-19
Mazda3_8V66-EA-06F_Edition3 Page293Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (294,1)
The quality designation SM, or ILSACmust be on the label.
–30 –20 –10 0 10 20 30 40 50
–20 0 20 40 60 80 100 120
5W-30
qInspecting Engine Oil Level
1. Be sure the vehicle is on a levelsurface.
2. Warm up the engine to normaloperating temperature.
3. Turn it off and wait at least 5 minutesfor the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, andreinsert it fully.
Full
OK
Low
Without turbocharger
With turbocharger
Max
Min
OK
5. Pull it out again and examine the level.It's OK between Low or MIN and Fullor MAX.But if it's near or below Low or MIN,add enough oil to bring the level toFull or MAX.
CAUTIONDon't add engine oil over Full or MAX.This may cause engine damage.
6. Make sure the O-ring on the dipstick ispositioned properly before reinsertingthe dipstick.
The distance between Low or MIN andFull or MAX on the dipstick representsthe following:
Oil capacity
L (US qt, Imp qt) 0.75 (0.79, 0.66)
8-20
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page294Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (295,1)
Engine Coolant
qInspecting Coolant Level
WARNINGDo not use a match or live flame in theengine compartment. DO NOT ADDCOOLANT WHEN THE ENGINE ISHOT:A hot engine is dangerous. If theengine has been running, parts of theengine compartment can become veryhot. You could be burned. Carefullyinspect the engine coolant in thecoolant reservoir, but do not open it.
Turn off the ignition switch andmake sure the fan is not runningbefore attempting to work near thecooling fan:Working near the cooling fan when itis running is dangerous. The fancould continue running indefinitelyeven if the engine has stopped and theengine compartment temperature ishigh. You could be hit by the fan andseriously injured.
Do not remove the coolingsystem cap when the engine andradiator are hot:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury.
NOTE
Changing the coolant should be doneby an Authorized Mazda Dealer.
Inspect the antifreeze protection andcoolant level in the coolant reservoir atleast once a year―at the beginning of thewinter season―and before travelingwhere temperatures may drop belowfreezing.
Inspect the condition and connections ofall cooling system and heater hoses.Replace any that are swollen ordeteriorated.
The coolant should be at full in theradiator and between the MAX or F andMIN or L marks on the coolant reservoirwhen the engine is cool.
Without turbocharger
Maintenance and Care
Owner Maintenance
8-21
Mazda3_8V66-EA-06F_Edition3 Page295Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (296,1)
With turbocharger
If it's at or near MIN or L, add enoughcoolant to the coolant reservoir to providefreezing and corrosion protection and tobring the level to MAX or F.
CAUTIONl Radiator coolant will damage paint.Rinse it off quickly if spilled.
l Use only soft (demineralized) waterin the coolant mixture. Water thatcontains minerals will cut down onthe coolant's effectiveness.
l Don't add only water. Always add aproper coolant mixture.
l The engine has aluminum parts andmust be protected by an ethylene-glycol-based coolant to preventcorrosion and freezing.
l DO NOT USE coolants ContainingAlcohol, methanol, Borate orSilicate.These coolants could damage thecooling system.
l DO NOT MIX alcohol or methanolwith the coolant. This could damagethe cooling system.
l Don't use a solution that containsmore than 60% antifreeze.This would reduce effectiveness.
8-22
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page296Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (297,1)
NOTE
If the “FL22” mark is shown on or nearthe cooling system cap, use FL22 typeengine coolant. If engine coolant otherthan FL22 type is used, the enginecoolant must be replaced earlier thanthe specified replacement intervalindicated in the scheduled maintenance(page 8-3).
If the coolant reservoir is empty or newcoolant is required frequently, consult anAuthorized Mazda Dealer.
Brake/Clutch Fluid
qInspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from thesame reservoir.Inspect the fluid level in the reservoirregularly. It should be kept at MAX.The level normally drops withaccumulated distance, a conditionassociated with wear of brake and clutchlinings. If it is excessively low, have thebrake/clutch system inspected by anAuthorized Mazda Dealer.
Without turbocharger
With turbocharger
Maintenance and Care
Owner Maintenance
8-23
Mazda3_8V66-EA-06F_Edition3 Page297Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (298,1)
qAdding Brake/Clutch Fluid
WARNINGSpilled Brake Fluid:Spilled brake fluid is dangerous. If itgets in your eyes, they could beseriously injured. If this happens,immediately flush your eyes with waterand get medical attention. Brake fluidspilled on a hot engine could cause afire. Be careful not to spill brake fluidon yourself or on the engine.
Low Brake/Clutch Fluid Levels:Low brake/clutch fluid levels aredangerous. Low levels could signalbrake lining wear or a brake systemleak. Your brakes could fail and causean accident. If you find a low fluidlevel, have the brakes and clutchinspected.
If the fluid level is low, add fluid until itreaches MAX.Before adding fluid, thoroughly clean thearea around the cap.
CAUTIONl Brake and clutch fluid will damagepainted surfaces. If brake or clutchfluid does get on a painted surface,wash it off with water immediately.
l Using nonspecified brake and clutchfluids (page 10-5) will damage thesystems. Mixing different fluids willalso damage them.If the brake/clutch system frequentlyrequires new fluid, consult anAuthorized Mazda Dealer.
Power Steering Fluid
qInspecting Power Steering FluidLevel
CAUTIONTo avoid damage to the power steeringpump, don't operate the vehicle for longperiods when the power steering fluidlevel is low.
NOTE
Use specified power steering fluid(page 10-5).
Inspect the fluid level in the reservoir ateach engine oil change with the engine offand cold. Add fluid if necessary; it doesnot require periodic changing.
Without turbocharger
8-24
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page298Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (299,1)
With turbocharger
The level must be kept between MIN andMAX.
Visually examine the lines and hoses forleaks and damage.
If new fluid is required frequently, consultan Authorized Mazda Dealer.
Automatic Transaxle Fluid(ATF)í
qInspecting Automatic TransaxleFluid Level
The automatic transaxle fluid level shouldbe inspected regularly. Measure it asdescribed below.
5AT
CAUTIONl Always check the automatictransaxle fluid level according to thefollowing procedure. If theprocedure is not done correctly, theautomatic transaxle fluid levelcannot be measured accuratelywhich could lead to automatictransaxle damage.
l A low fluid level can cause transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.
l Use only the specified fluid. A non-specified fluid could result intransaxle malfunction and failure.
1. Park on a level surface and set theparking brake firmly.
2. Make sure there is no ATF leakagefrom the ATF hose or the housing.
3. Shift the shift lever to the park position(P), start the engine and warm it up.
Maintenance and Care
Owner Maintenance
8-25íSome models.
Mazda3_8V66-EA-06F_Edition3 Page299Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (300,1)
CAUTIONDo not shift the shift lever while theengine is warming up. If the ATF levelis extremely low, the automatictransaxle could be damaged.
4. While the engine is still idling, pull outthe dipstick and wipe it clean, and thenput it back.
5. Check the ATF level. If there is no ATFadhering 5 mm from the end of thedipstick, add ATF.
CAUTIONIf there is no ATF adhering to thedipstick even after the engine has beenwarmed up, do not drive the vehicle.Otherwise, the automatic transaxlecould be damaged.
6. Shift the shift lever to each range andposition, and make sure there is noabnormality.
7. Drive the vehicle on city roads for5 km (3.1 mile) or more.
8. Park on a level surface and set theparking brake firmly.
9. Shift the shift lever to the park position(P), check the ATF level while theengine is idling, and make sure that theATF level is within the proper level. Ifthe ATF level is not within the properlevel, add ATF.The proper fluid level is marked on thedipstick as follows.
Full
OK
Low
4AT
The volume of fluid changes with thetemperature. Fluid must be checked at idlewithout driving at normal operatingtemperature.
CAUTIONl Low fluid level causes transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.
l Use specified fluid (page 10-5). Anonspecified fluid could result intransaxle malfunction and failure.
1. Park on a level surface and set theparking brake firmly.
2. Start the engine and depress the brakepedal.
8-26
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page300Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (301,1)
3. Move the shift lever through all ranges,then set it at P.
WARNINGSudden Vehicle Movement:Shifting the shift lever without firstdepressing the brake pedal isdangerous. The vehicle could movesuddenly and cause an accident.Make sure the brake pedal is appliedbefore shifting the shift lever.
4. With the engine still idling, pull out thedipstick, wipe it clean, and put it back.
5. Pull it out again.The proper fluid level is marked on thedipstick as follows.
A
Full
Low B
Full
Fluid hot scale A
When the vehicle has been driven and thefluid is at normal operating temperature,about 65°C (150°F), the level must bebetween Full and Low.
Fluid cold scale B
When the engine has not been runningand the outside temperature is about 20°C(70°F), the fluid level should be close to,but not above, the bottom notch on thedipstick.
CAUTIONl Use the cold scale only as areference.
l If outside temperature is lower thanabout 20°C (70°F), start the engineand inspect the fluid level after theengine reaches operatingtemperature.
l If the vehicle has been driven for anextended period at high speeds or incity traffic in hot weather, inspect thelevel only after stopping the engineand allowing the fluid to cool for 30minutes.
Fully insert the dipstick. When addingfluid, inspect with the dipstick to makesure it doesn't pass full.
NOTE
Inspect the fluid on both sides of thedipstick in a well lit area for an accuratereading.
Maintenance and Care
Owner Maintenance
8-27
Mazda3_8V66-EA-06F_Edition3 Page301Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (302,1)
Washer Fluid
qInspecting Washer Fluid Level
WARNINGUse only windshield washer fluid orplain water in the reservoir:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident.
Using Washer Fluid Without Anti-freeze Protection in Cold Weather:Operating your vehicle intemperatures below 4 degrees C (40degrees F) using washer fluid withoutanti-freeze protection is dangerous asit could cause impaired windshieldvision and result in an accident. Incold weather, always use washer fluidwith anti-freeze protection.
NOTE
State or local regulations may restrictthe use of volatile organic compounds(VOCs), which are commonly used asanti-freeze agents in washer fluid. Awasher fluid with limited VOC contentshould be used only if it providesadequate freeze resistance for allregions and climates in which thevehicle will be operated.
Inspect fluid level in the washer fluidreservoir; add fluid if necessary.
To inspect the washer fluid level in thefront reservoir, pull off the cap. Then,holding your thumb over the hole in thecenter of the cap, lift it straight up. Thefluid level can be seen from the fluidcolumn in the pipe. Add fluid if necessary.
Use plain water if washer fluid isunavailable. But use only washer fluid incold weather to prevent it from freezing.
NOTE
Front and rear washer fluid is suppliedfrom the same reservoir.
8-28
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page302Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (303,1)
Body LubricationAll moving points of the body, such asdoor and hood hinges and locks, shouldbe lubricated each time the engine oil ischanged. Use a nonfreezing lubricant onlocks during cold weather.
Make sure the hood's secondary latchkeeps the hood from opening when theprimary latch is released.
Wiper Blades
CAUTIONl Hot waxes applied by automatic carwashers have been known to affectthe wiper's ability to clean windows.
l To prevent damage to the wiperblades, don't use gasoline, kerosene,paint thinner, or other solvents on ornear them.
l When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically inthe following cases:
l If the windshield above the rainsensor is touched.
l If the windshield above the rainsensor is wiped with a cloth.
l If the windshield is struck with ahand or other object.
l If the rain sensor is struck with ahand or other object from insidethe vehicle.
Be careful not to pinch hands orfingers as it may cause injury, ordamage the wipers. When washingor servicing your Mazda, make surethe wiper lever is in the OFFposition.
Contamination of either the windshield orthe blades with foreign matter can reducewiper effectiveness. Common sources areinsects, tree sap, and hot wax treatmentsused by some commercial car washes.
Maintenance and Care
Owner Maintenance
8-29
Mazda3_8V66-EA-06F_Edition3 Page303Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (304,1)
If the blades are not wiping properly,clean the window and blades with a goodcleaner or mild detergent; then rinsethoroughly with clean water. Repeat ifnecessary.
qReplacing Windshield Wiper Blades
When the wipers no longer clean well, theblades are probably worn or cracked.Replace them.
CAUTIONTo prevent damage to the wiper armsand other components, don't try tosweep the wiper arm by hand.
1. Raise the wiper arm and turn the bladeassembly to expose the plastic lockingclip.Slide the assembly downward; then liftit off the arm.
Plastic locking clip
CAUTIONTo prevent damage to the windshield letthe wiper arm down easily, don't let itslap down on the windshield.
2. Pull down the blade rubber and slide itout of blade holder.
3. Remove the metal stiffener from eachblade rubber and install them in thenew blade.
8-30
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page304Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (305,1)
CAUTIONl Don't bend or discard the stiffener.You need to use them again.
l If the metal stiffeners are switched,the blade's wiping efficiency couldbe reduced.So don't use the driver's side metalstiffener on the passenger's side, orvice versa.
l Be sure to reinstall the metalstiffener in the new blade rubber sothat the curve is the same as it was inthe old blade rubber.
4. Carefully insert the new blade rubber.Then install the blade assembly in thereverse order of removal.
qReplacing Rear Wiper Blade (5Door)
When the wiper no longer cleans well, theblade is probably worn or cracked.Replace it.
CAUTIONTo prevent damage to the wiper armand other components, don't try tosweep the wiper arm by hand.
1. Raise the wiper arm and rotate thewiper blade to the right until it unlocks,then remove the blade.
CAUTIONTo prevent damage to the rear windowlet the wiper arm down easily, don't letit slap down on the rear window.
2. Pull down the blade rubber and slide itout of the blade holder.
Maintenance and Care
Owner Maintenance
8-31
Mazda3_8V66-EA-06F_Edition3 Page305Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (306,1)
3. Remove the metal stiffener from eachblade rubber and install them in thenew blade.
CAUTIONDon't bend or discard the stiffener. Youneed to use them again.
4. Carefully insert the new blade rubber.Then install the blade assembly in thereverse order of removal.
8-32
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page306Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (307,1)
Battery
WARNINGBattery-Related Lead Materials:Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm.Wash hands after handling.
Follow These Precautions Carefully:To ensure safe and correct handling of the battery, read the following precautionscarefully before using the battery or inspecting it.
Eye Protection:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode. Always wear eye protection when working near the battery.
Spilled Battery Fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention. Wear eyeprotection and protective gloves to prevent contact with battery fluid.
Children and Batteries:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin. Always keep batteries out of thereach of children.
Maintenance and Care
Owner Maintenance
8-33
Mazda3_8V66-EA-06F_Edition3 Page307Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (308,1)
WARNING
Keep Flames Away:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes and sparks away from open battery cells. When working near a battery, donot allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery. Do not allow the positive ( ) terminal to contact the vehicle body.
Battery-Related Explosion:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames, includingcigarettes, and sparks away from open battery cells.
8-34
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page308Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (309,1)
NOTE
Remove the battery cover beforeperforming battery maintenance.
Battery cover
qBattery Maintenance
To get the best service from a battery:
l Keep it securely mounted.
l Keep the top clean and dry.
l Keep terminals and connections clean,tight, and coated with petroleum jellyor terminal grease.
l Rinse off spilled electrolyteimmediately with a solution of waterand baking soda.
l If the vehicle will not be used for anextended time, disconnect the batterycables.
qInspecting Electrolyte Level
A low level of electrolyte fluid will causethe battery to discharge quickly.
Upper level
Lower level
Inspect the electrolyte level at least once aweek. If it's low, remove the caps and addenough distilled water to bring the levelbetween the upper and lower level(illustration).
Don't overfill.Examine the specific gravity of theelectrolyte with a hydrometer, especiallyduring cold weather. If it's low, rechargethe battery.
Maintenance and Care
Owner Maintenance
8-35
Mazda3_8V66-EA-06F_Edition3 Page309Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (310,1)
TiresFor reasons of proper performance, safety,and better fuel economy, always maintainrecommended tire inflation pressures andstay within the recommended load limitsand weight distribution.
WARNINGUsing Different Tire Types:Driving your vehicle with differenttypes of tires is dangerous. It couldcause poor handling and poorbraking; leading to loss of control.Except for the limited use of thetemporary spare tire, use only thesame type tires (radial, bias-belted,bias-type) on all four wheels.
Using Wrong-Sized Tires:Using any other tire size than what isspecified for your Mazda (page 10-8)is dangerous. It could seriously affectride, handling, ground clearance, tireclearance, and speedometercalibration. This could cause you tohave an accident. Use only tires thatare the correct size specified for yourMazda.
qTire Inflation Pressure
WARNINGIncorrect Tire Inflation:Overinflation or underinflation of tiresis dangerous. Adverse handling orunexpected tire failure could result ina serious accident. Always inflate thetires to the correct pressure (page10-8).
The Tire Pressure Monitoring Systemí
does not alleviate the need to check thetire condition every day, includingwhether the tires all look inflated properly.Inspect all tire pressure monthly(including the spare) when the tires arecold. Maintain recommended pressuresfor the best ride, handling, and minimumtire wear.When checking the tire pressures, use of adigital tire pressure gauge isrecommended.
Refer to the specification charts (page10-8).
8-36
Maintenance and Care
íSome models.
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page310Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (311,1)
NOTE
l Always check tire pressure whentires are cold.
l Warm tires normally exceedrecommended pressures. Don'trelease air from warm tires to adjustthe pressure.
l Underinflation can cause reducedfuel economy, uneven andaccelerated tire wear, and poorsealing of the tire bead, which willdeform the wheel and causeseparation of tire from rim.
l Overinflation can produce a harshride, uneven and accelerated tirewear, and a greater possibility ofdamage from road hazards.Keep your tire pressure at the correctlevels. If one frequently needsinflating, have it inspected.
qTire Rotation
To equalize tread wear, rotate the tires ifirregular wear develops. According to thescheduled maintenance charts.Refer toScheduled Maintenance on page 8-3.During rotation, inspect them for correctbalance.
Do not include (TEMPORARY USE ONLY) spare tire in rotation.
Forward
Also, inspect them for uneven wear anddamage. Abnormal wear is usually causedby one or a combination of the following:
l Incorrect tire pressure
l Improper wheel alignment
l Out-of-balance wheel
l Severe braking
After rotation, inflate all tire pressures tospecification (page 10-8) and inspect thelug nuts for tightness.
CAUTIONRotate unidirectional tires and radialtires that have an asymmetrical treadpattern or studs only from front to rear,not from side to side. Tire performancewill be weakened if rotated from side toside.
qReplacing a Tire
WARNINGWorn Tires:Driving with worn tires is dangerous.Reduced braking, steering, andtraction could result in an accident.Always use tires that are in goodcondition.
Maintenance and Care
Owner Maintenance
8-37
Mazda3_8V66-EA-06F_Edition3 Page311Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (312,1)
CAUTION(With Tire Pressure MonitoringSystem)When replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.
NOTE
(With Tire Pressure MonitoringSystem)
l When tires with steel wirereinforcement in the sidewalls areused, the system may not functioncorrectly even with a genuine wheel.Refer to System Error Activation onpage 5-29.
l Be sure to install the tire pressuresensors whenever tires or wheels arereplaced.Refer to Tires and Wheels on page5-29.
If a tire wears evenly, a wear indicatorwill appear as a solid band across thetread.Replace the tire when this happens.
New tread
Tread wear indicator
Worn tread
You should replace it before the band isacross the entire tread.
NOTE
Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-22.
qTemporary Spare Tire
Inspect the temporary spare tire at leastmonthly to make sure it's properly inflatedand stored.
NOTE
The temporary spare tire conditiongradually deteriorates even if it has notbeen used.
The temporary spare tire is easier tohandle because of its construction. It islighter and smaller than a conventionaltire and should be used only for anemergency and only for a short distance.
Use the temporary only until theconventional tire is repaired, which shouldbe as soon as possible.
Maintain its pressure at 420 kPa (4.2kgf/cm2 or bar, 60 psi).
8-38
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page312Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (313,1)
CAUTIONl Don't use your temporary spare tirerim with a snow tire or aconventional tire. Neither willproperly fit and could damage bothtire and rim.
l The temporary spare tire has a treadlife of less than 5,000 km (3,000miles). The tread life may be shorterdepending on driving conditions.
l The temporary spare tire is forlimited use, however, if the treadwear solid-band indicator appears,replace the tire with the same type oftemporary spare (page 8-37).
NOTE
Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-22.
qReplacing a Wheel
WARNINGUsing a Wrong-Sized Wheel:Using a wrong-sized wheel isdangerous. Braking and handlingcould be affected, leading to loss ofcontrol and an accident. Always usewheels of the correct size on yourvehicle.
CAUTIONl Awrong-sized wheel may adverselyaffect:
l Tire fitl Wheel and bearing lifel Ground clearancel Snow-chain clearancel Speedometer calibrationl Headlight aiml Bumper heightl Tire Pressure Monitoring Systeml Limited-Slip Differential System
l (With Tire Pressure MonitoringSystem)
l When replacing/repairing the tiresor wheels or both, have the workdone by an Authorized MazdaDealer, or the tire pressure sensorsmay be damaged.
l The wheels equipped on yourMazda are specially designed forinstallation of the tire pressuresensors. Do not use non-genuinewheels, otherwise it may not bepossible to install the tire pressuresensors.
Maintenance and Care
Owner Maintenance
8-39
Mazda3_8V66-EA-06F_Edition3 Page313Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (314,1)
NOTE
Be sure to install the tire pressuresensors whenever tires or wheels arereplaced. Refer to Tires and Wheels onpage 5-29.
When replacing a wheel, make sure thenew one is the same as the original factorywheel in diameter, rim width, and offset.
Proper tire balancing provides the bestriding comfort and helps reduce treadwear. Out-of-balance tires can causevibration and uneven wear, such ascupping and flat spots.
8-40
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page314Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (315,1)
Light Bulbs
Side turn signal lights
Rear turn signal lights
License plate lightOverhead light/Map lights (Front)
Headlights (Low beam)
Fog lights
Brake lights/Taillights
Reverse lights
High-mount brake light
Trunk light
4 Door
5 Door
Overhead light (Rear)
Overhead light/Map lights (Front)
Headlights (Low beam)
Side turn signal lights
Fog lights
License plate light
High-mount brake light
Overhead light (Rear)
Rear turn signal lights
Brake lights/Taillights
Reverse lights
Some models.
Front turn signal lights/Side-marker lights
Headlights (High beam)
Front turn signal lights/Side-marker lights
Headlights (High beam) Luggage
compartment light
Maintenance and Care
Owner Maintenance
8-41
Mazda3_8V66-EA-06F_Edition3 Page315Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (316,1)
WARNINGDo not replace the xenon fusion bulbsyourself:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Consult an AuthorizedMazda Dealer when the replacement isnecessary.
Handling Halogen Bulbs:When a halogen bulb breaks, it isdangerous. These bulbs containpressurized gas. If one is broken, itwill explode and serious injuries couldbe caused by the flying glass.If the glass portion is touched withbare hands, body oil could cause thebulb to overheat and explode when lit.Never touch the glass portion of thebulb with your bare hands and alwayswear eye protection when handling orworking around halogen bulbs.
Children and Halogen Bulbs:Playing with a halogen bulb isdangerous. Serious injuries could becaused by dropping a halogen bulb orbreaking it some other way.Always keep halogen bulbs out of thereach of children.
qReplacing Exterior Light Bulbs
Replacing a headlight bulb
(Without turbocharger)
1. Make sure the ignition switch is turnedoff and the headlight switch is off.
2. Lift the hood.
3. Turn the screws counterclockwise andremove them and the cover whenreplacing the left headlight bulb.
Cover
4. Find the high and low beam bulbs inthe rear of the headlight unit.The outboard bulb is the LOW beam,and the inboard one is the HIGH beam.Refer to Light Bulbs on page 8-41.
(With turbocharger)
1. Make sure the ignition switch is turnedoff and the headlight switch is off.
2. Lift the hood.
8-42
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page316Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (317,1)
3. Do the following procedure whenreplacing the left headlight bulb.Remove the clip, grasp the attachedarea of the slide mount and lift itupward, and then slide the slide mountto a position where it does not interferewith the frame.
Clip
Slide mount
Frame
Attached area
4. Remove the strap and raise the airfilter.
Strap
5. Find the high and low beam bulbs inthe rear of the headlight unit.The outboard bulb is the LOW beam,and the inboard one is the HIGH beam.Refer to Light Bulbs on page 8-41.
High-beam bulb
1. Turn the socket and bulb assemblycounterclockwise and remove it.Carefully remove the headlight bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.
2. Disconnect the bulb from the electricalconnector by pressing the tab on theconnector with your finger and pullingthe bulb upward.
Maintenance and Care
Owner Maintenance
8-43
Mazda3_8V66-EA-06F_Edition3 Page317Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (318,1)
3. Install the new bulb in the reverse orderof removal.
NOTE
l To replace the bulb, contact anAuthorized Mazda Dealer.
l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.
l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.
Low-beam bulb
(Xenon fusion bulb)You cannot replace the low beam bulbs byyourself.The bulbs must be replaced at anAuthorized Mazda Dealer.
(Halogen bulbs)
1. Detach the electrical connector fromthe bulb by pulling it to the rear.
2. Pull off the sealing cover.
3. Unhook the bulb retaining spring.
4. Swing the retaining spring out andaway to free the headlight bulb.
5. Carefully remove the headlight bulbfrom the socket by pulling it straightback.
6. Replace the bulb.
7. Install the new bulb in the reverse orderof removal.
NOTE
l To replace the bulb, contact anAuthorized Mazda Dealer.
l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.
l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.
l When reinstalling the sealing cover,make sure faces up.
8-44
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page318Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (319,1)
Replacing a fog light bulbí
1. Turn the screw counterclockwise andremove it and partially peel back themudguard.
2. Disconnect the electrical connectorfrom the bulb by pressing the tab onthe connector with your finger andpulling the connector downward.
3. Turn the socket and bulb assembly toremove it. Carefully remove the bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.
4. Install the new bulb in the reverse orderof removal.
NOTE
l To replace the bulb, contact anAuthorized Mazda Dealer.
l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.
l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.
Front turn signal lights/Side-markerlights
Due to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda Dealer.
Side turn signal lights
1. Slide the unit as shown in the figure toremove it.
2. Detach the electrical connector fromthe unit by pulling it to the rear.
3. Install the new side turn signal unit inthe reverse order of removal.
Maintenance and Care
Owner Maintenance
8-45íSome models.
Mazda3_8V66-EA-06F_Edition3 Page319Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (320,1)
NOTE
Bulb replacement is not possiblebecause it is built into the unit. Replacethe unit.
Brake lights/Taillights (4 Door)
With LED bulb
Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer.
NOTE
LED bulb replacement is not possible.The rear combination component mustbe replaced.
With Non-LED bulb
1. Pull the center of each plastic retainerand remove the retainers and the trunkend trim.
Removal
Installation
2. Pull the center of each plastic retainerand remove the retainers and partiallyopen the trunk side trim.
Removal
Installation
3. Turn the socket and bulb assemblycounterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
8-46
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page320Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (321,1)
Brake lights/Taillights (5 Door)
With LED bulb
Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer.
NOTE
LED bulb replacement is not possible.The rear combination component mustbe replaced.
With Non-LED bulb
1. Remove the cover.
Left side
Right side
2. Turn the socket and bulb assemblycounterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
Rear turn signal lights (4 Door)
1. Pull the center of each plastic retainerand remove the retainers and the trunkend trim.
Removal
Installation
Maintenance and Care
Owner Maintenance
8-47
Mazda3_8V66-EA-06F_Edition3 Page321Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (322,1)
2. Pull the center of each plastic retainerand remove the retainers and partiallyopen the trunk side trim.
Removal
Installation
3. Turn the socket and bulb assemblycounterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
Rear turn signal lights (5 Door)
1. Remove the cover.
Left side
Right side
2. Turn the socket and bulb assemblycounterclockwise and remove it.
3. Disconnect the bulb from the socket.
8-48
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page322Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (323,1)
4. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
Reverse lights
4 Door
1. Pull the center section of the plasticretainer and remove the retainers, thenremove the trunk rear trim.
Removal
Installation
2. Turn the socket and bulb assemblycounterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
5 Door
1. Remove the cover.
2. Turn the socket and bulb assemblycounterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
Maintenance and Care
Owner Maintenance
8-49
Mazda3_8V66-EA-06F_Edition3 Page323Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (324,1)
High-mount brake light
4 Door
1. Pull the center of each plastic retainerand remove the retainers and the trunkrear trim.
Removal
Installation
2. Disconnect the electrical connectorfrom the socket.
3. Turn the socket and bulb assemblycounterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse orderof removal.
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
5 Door
With LED bulb
Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer.
With Non-LED bulb
1. Remove the liftgate upper trim.
2. Disconnect the electrical connectorfrom the socket.
3. Turn the socket and bulb assemblycounterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse orderof removal.
8-50
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page324Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (325,1)
NOTE
To replace the bulb, contact anAuthorized Mazda Dealer.
License plate lights
1. Wrap a flathead screwdriver with a softcloth to prevent damage to the lens andremove the lens by carefully prying onthe edge of the lens with a flatheadscrewdriver.
2. Disconnect the bulb by pulling it out.
Edge
3. Install the new bulb in the reverse orderof removal.
qReplacing Interior Light Bulbs
Overhead light/Map lights (Front)í
Due to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda Dealer.
Overhead light (Rear)
1. Wrap a small flathead screwdriver witha soft cloth to prevent damage to thelens and remove the lens by carefullyprying on the edge of the lens with theflathead screwdriver.
2. Disconnect the bulb by pulling it out.
Edge
3. Install the new bulb in the reverse orderof removal.
Trunk light (4 Door)
1. Press both sides of the lens cap toremove it.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse orderof removal.
Maintenance and Care
Owner Maintenance
8-51íSome models.
Mazda3_8V66-EA-06F_Edition3 Page325Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (326,1)
Luggage compartment light (5 Door)
1. Insert your finger as shown in thefigure and remove the unit.
2. Wrap a small flathead screwdriver witha soft cloth to prevent damage to thelens and remove the lens by carefullyprying on the edge of the lens with theflathead screwdriver.
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse orderof removal.
FusesYour vehicle's electrical system isprotected by fuses.
If any lights, accessories, or controls don'twork, inspect the appropriate circuitprotector. If a fuse has blown, the insideelement will be melted.
If the same fuse blows again, avoid usingthat system and consult an AuthorizedMazda Dealer as soon as possible.
qFuse Replacement
Replacing the fuses on the frontpassenger's side below the glove box
If the electrical system doesn't work, firstinspect fuses on the front passenger's sidebelow the glove box.
1. Turn off the ignition switch and otherswitches.
2. Remove the cover.
8-52
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page326Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (327,1)
3. Turn the knobs counterclockwise andlower the fuse block.
4. Locate the position of the suspectedfuse by using the chart inside the fuseblock cover.
5. Pull the fuse straight out with the fusepuller provided on the inside of theengine compartment fuse block cover.
6. Inspect the fuse and replace it if it'sblown.
Normal Blown
7. Push in a new fuse of the sameamperage rating, and make sure it fitstightly. If it doesn't, have an expertrepairer install it. We recommend anAuthorized Mazda Dealer.If you have no spare fuses, borrow oneof the same rating from a circuit notessential to vehicle operation, such asthe MIRROR or CIGAR circuit.
CAUTIONAlways replace a fuse with one of thesame rating. Otherwise you maydamage the electric system.
Replacing the fuses under the hood
If the headlights or other electricalcomponents do not work and the fuses inthe cabin are normal, inspect the fuseblock under the hood. If a fuse is blown, itmust be replaced. Follow these steps:
1. Turn off the ignition switch and allother switches.
Maintenance and Care
Owner Maintenance
8-53
Mazda3_8V66-EA-06F_Edition3 Page327Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (328,1)
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse isblown, replace it with a new one of thesame amperage rating.
Normal Blown
WARNINGDo not replace the main fuse byyourself. Have an Authorized MazdaDealer perform the replacement:Replacing the fuse by yourself isdangerous because the MAIN fuse is ahigh current fuse. Incorrectreplacement could cause an electricalshock or a short circuit resulting in afire.
Main fuse
8-54
Maintenance and Care
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page328Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (329,1)
qFuse Panel Description
Fuse block (Engine compartment)
1
2
3
4
5
6
7 8
9
10
11
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26 27
28
29
30 31
32
33
34
35
36
Without turbocharger
DESCRIPTION FUSE RATING PROTECTED COMPONENT
1 FAN 40A Cooling fan
2 P/ST 80A Power steering
3 BTN 40A For protection of various circuits
4 HEAD 40A Headlights
5 PTC ― ―
6 GLOW ― ―
7 ABS 1 30A ABSí, DSCí
8 ABS 2 20A ABSí, DSCí
9 ENGINE 30A For protection of various circuits
10 ― ― ―
11 IG KEY 1 30A Ignition switch
12 STARTER 20A Starter clutch
13 IG KEY 2 30A Ignition switch
14 GLOW 1 ― ―
15 HEATER 40A Blower motor
16 GLOW 2 ― ―
17 DEFOG 40A Rear window defroster
Maintenance and Care
Owner Maintenance
8-55íSome models.
Mazda3_8V66-EA-06F_Edition3 Page329Wednesday, August 23 2006 11:21 AM
Form No.8V66-EA-06F
Black plate (330,1)
DESCRIPTION FUSE RATING PROTECTED COMPONENT
18 AUDIO 30AAudio system(BOSE Sound System-equipped model)
19 ABS IG 10A ABSí, DSCí
20 FOG 15A Front fog lightsí
21 HORN 15A Horn
22 DRL 10A DRLí
23 H/CLEAN ― ―
24 F/PUMP 15A Fuel pump
25 P/ST IG 10A Power steering
26 A/C MAG 10A Air conditionerí
27 ALT/TCM 10A/15A TCMí
28 GLOW SIG ― ―
29 P.OUTLET ― Power outlet
30 ENG +B 10A PCM
31 ROOM 15A Interior lights
32 ENG BAR 4 10A O2 sensorsí
33 ENG BAR 3 10A O2 sensors
34 EGI INJ 10A Injector
35 ENG BAR 1 10A For protection of various circuits
36 ENG BAR 2 10A PCM, Fuel pump
8-56
Maintenance and Care
íSome models.
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page330Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (331,1)
With turbocharger
DESCRIPTION FUSE RATING PROTECTED COMPONENT
1 FAN 70A Cooling fan
2 ― ― ―
3 BTN 40A For protection of various circuits
4 HEAD 40A Headlights
5 F/PUMP 30A Fuel pump
6 ― ― ―
7 ABS 1 30A ABS, DSC
8 ABS 2 20A ABS, DSC
9 ENGINE 30A For protection of various circuits
10 INJECTOR 30A Fuel injector
11 IG KEY1 30A Ignition switch
12 STATER 20A Starter clutch
13 IG KEY2 30A Ignition switch
14 ― ― ―
15 HEATER 40A Blower motor
16 ― ― ―
17 DEFOG 40A Rear window deforester
18 AUDIO 30AAudio system(BOSE Sound System-equipped model)
19 ABS IG 10A ABS
20 FOG 15A Front fog lights
21 HORN 15A Horn
22 DRL 10A DRLí
23 H/CLEAN ― ―
24 ETC 10A Elec. throttle valve
25 ― ― ―
26 A/C MAG 10A Air conditioner
27 ― ― ―
28 ― ― ―
29 P.OUTLET 15A Power outlet
30 ENG +B 10A PCM
31 ROOM 15A Interior lights
32 ― ― ―
33 ENG BAR 3 10A O2 sensors
34 ― ― ―
35 ENG BAR 1 15A For protection of various circuits
36 ENG BAR 2 10A PCM, Fuel pump
Maintenance and Care
Owner Maintenance
8-57íSome models.
Mazda3_8V66-EA-06F_Edition3 Page331Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (332,1)
Fuse block (Passenger's side)
37 38 39 40 4142
43 44 4546 47 48 49 50 515253 54 55 56 5758 59 60 61 62 63 64
65 66 67 68 69 70 7172 737475 76 77 78 79808182 83 84 85 86
DESCRIPTION FUSE RATING PROTECTED COMPONENT
37 D/LOCK 2 15A Double locking systemí
38 STOP LAMP/HORN 10A Stop Lamp, Horn
39 HEAD HIGH L 10A Headlight high beam (LH)
40 HEAD HIGH R 10A Headlight high beam (RH)
41 ― ― ―
42 ― ― ―
43 CIGAR 15A Lighter
44 RADIO 7.5A Audio system
45 MIRROR 10A Power control mirrorí
46 TAIL R 7.5ATaillight (RH), Parking light (RH), Licenseplate lights
47 OBD 10A For protection of various circuits
48 ― ― ―
49 TR/LOCK ― ―
50 ― ― ―
51 ― ― ―
52 SUN ROOF 20A Moonroofí
53 WASHER 20A Windshield wiper and washer
54 ― ― ―
55 P/WIND R ― ―
8-58
Maintenance and Care
íSome models.
Owner Maintenance
Mazda3_8V66-EA-06F_Edition3 Page332Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (333,1)
DESCRIPTION FUSE RATING PROTECTED COMPONENT
56 P/WIND L ― ―
57 ALARM ― ―
58 M/DEF 7.5A Mirror Defrosterí
59 ― ― ―
60 HEAD LOW R 15A Headlight low beam (RH), Headlight leveling
61 HEAD LOW L 15A Headlight low beam (LH)
62 ― ― ―
63 ― ― ―
64 ― ― ―
65 SAS 10A Supplemental restraint system
66 METER 10A Instrument cluster, Immobilizer system
67 IGNITION 20A ABSí, DSCí, Power steering
68 WIPER 20A Windshield wiper and washer
69 ENGINE 20A For protection of various circuits
70 IG SIG 10A Auto wiperí, Power window switchí
71 SAS 2 7.5A Seat weight sensor
72 ― ― ―
73 ― ― ―
74 SEAT WARM 20A Seat warmerí
75 D/LOCK 1 25A Power door lockí
76 A/C 10A Air conditionerí, Heater control unit
77 P/WIND L 30A Power window (LH)í
78 P/WIND R 30A Power window (RH)í
79 BACK 10A Reverse lights
80 SUN ROOF 7.5A Moonroofí
81 TAIL L 7.5A Taillight (LH), Parking light (LH)
82 ILLUMI 7.5A Illumination
83 ― ― ―
84 ― ― ―
85 ― ― ―
86 ― ― ―
Maintenance and Care
Owner Maintenance
8-59íSome models.
Mazda3_8V66-EA-06F_Edition3 Page333Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (334,1)
How to MinimizeEnvironmental Paint Damage
The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application.
Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken.
Here are some examples of possibledamage, with tips on how to preventthem.
qEtching Caused by Acid Rain orIndustrial Fallout
Occurrence
Industrial pollutants and vehicle emissionsdrift into the air and mix with rain or dewto form acids. These acids can settle on avehicle's finish. As the water evaporates,the acid becomes concentrated and candamage the finish.And the longer the acid remains on thesurface, the greater the chance is fordamage.
Prevention
It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou suspect that acid rain has settled onyour vehicle's finish.
qDamage Caused by BirdDropping, Insects, or Tree Sap
Occurrence
Bird droppings contain acids. If thesearen't removed they can eat away the clearand color base coat of the vehicle'spaintwork.
When insects stick to the paint surfaceand decompose, corrosive compoundsform. These can erode the clear and colorbase coat of the vehicle's paintwork ifthey are not removed.
Tree sap will harden and adherepermanently to the paint finish. If youscratch the sap off while it is hard, somevehicle paint could come off with it.
Prevention
It is necessary to have your Mazdawashed and waxed to preserve its finishaccording to the instructions in thissection. This should be done as soon aspossible.
Bird droppings can be removed with asoft sponge and water. If you are travelingand these are not available, a moistenedtissue may also take care of the problem.The cleaned area should be waxedaccording to the instructions in thissection.Insects and tree sap are best removed witha soft sponge and water or a commerciallyavailable chemical cleaner.
Another method is to cover the affectedarea with dampened newspaper for one totwo hours. After removing the newspaper,rinse off the loosened debris with water.
8-60
Maintenance and Care
Appearance Care
Mazda3_8V66-EA-06F_Edition3 Page334Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (335,1)
qWater Marks
Occurrence
Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's finish.
Prevention
It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou find water marks on your vehicle'sfinish.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrownin the air by another vehicle's tires hitsyour vehicle.
How to avoid paint chipping
Keeping a safe distance between you andthe vehicle ahead reduces the chances ofhaving your paint chipped by flyinggravel.
NOTE
l The paint chipping zone varies withthe speed of the vehicle. Forexample, when traveling at 90 km/h(56 mph), the paint chipping zone is50 m (164 ft).
l In low temperatures a vehicle's finishhardens. This increases the chance ofpaint chipping.
l Chipped paint can lead to rustforming on your Mazda. Before thishappens, repair the damage by usingMazda touch-up paint according tothe instructions in this section.Failure to repair the affected areacould lead to serious rusting andexpensive repairs.
Maintenance and Care
Appearance Care
8-61
Mazda3_8V66-EA-06F_Edition3 Page335Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (336,1)
Exterior CareFollow all label and container directionswhen using a chemical cleaner or polish.Read all warnings and cautions.
qMaintaining the Finish
Washing
CAUTIONWhen the wiper lever is in the AUTOposition and the ignition switch is in theON position, the wipers may moveautomatically in the following cases:
l If the windshield above the rainsensor is touched.
l If the windshield above the rainsensor is wiped with a cloth.
l If the windshield is struck with ahand or other object.
l If the rain sensor is struck with ahand or other object from inside thevehicle.
Be careful not to pinch hands or fingersas it may cause injury, or damage thewipers. When washing or servicingyour Mazda, make sure the wiper leveris in the OFF position.
To help protect the finish from rust anddeterioration, wash your Mazdathoroughly and frequently, at least once amonth, with lukewarm or cold water.
If the vehicle is washed improperly, thepaint surface could be scratched. Here aresome examples of how scratching couldoccur.
Scratches occur on the paint surfacewhen:
l The vehicle is washed without firstrinsing off dirt and other foreignmatter.
l The vehicle is washed with a rough,dry, or dirty cloth.
l The vehicle is washed at a car washthat uses brushes that are dirty or toostiff.
l Cleansers or wax containing abrasivesare used.
NOTE
l Mazda is not responsible forscratches caused by automatic carwashes or improper washing.
l Scratches are more noticeable onvehicles with darker paint finishes.
To minimize scratches on the vehicle'spaint finish:
l Rinse off any dirt or other foreignmatter using lukewarm or cold waterbefore washing.
l Use plenty of lukewarm or cold waterand a soft cloth when washing thevehicle. Do not use a nylon cloth.
l Rub gently when washing or drying thevehicle.
l Take your vehicle only to a car washthat keeps its brushes well maintained.
l Don't use abrasive cleansers or waxthat contain abrasives.
8-62
Maintenance and Care
Appearance Care
Mazda3_8V66-EA-06F_Edition3 Page336Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (337,1)
CAUTIONl Don't use steel wool, abrasivecleaners, or strong detergentscontaining highly alkaline or causticagents on chrome-plated or anodizedaluminum parts. This may damagethe protective coating; also, cleanersand detergents may discolor ordeteriorate the paint.
l To prevent damaging the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.
Pay special attention to removing salt,dirt, mud, and other foreign material fromthe underside of the fenders, and makesure the drain holes in the lower edges ofthe doors and rocker panels are clean.
Insects, tar, tree sap, bird droppings,industrial fallout, and similar deposits candamage the finish if not removedimmediately. When prompt washing withplain water is ineffective, use a mild soapmade for use on vehicles.
Thoroughly rinse off all soap withlukewarm or cold water. Don't allow soapto dry on the finish.
After washing the vehicle, dry it with aclean chamois to prevent water spots fromforming.
WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal.
Waxing
Your vehicle needs to be waxed whenwater no longer beads on the finish.Always wash and dry the vehicle beforewaxing it. In addition to the vehicle body,wax the metal trim to maintain its luster.
1. Use wax which contains no abrasives.Waxes containing abrasive will removepaint and could damage bright metalparts.
2. Use a good grade of natural wax formetallic, mica, and solid colors.
3. When waxing, coat evenly with thesponge supplied or a soft cloth.
4. Wipe off the wax with a soft cloth.
NOTE
A spot remover to remove oil, tar, andsimilar materials will usually also takeoff the wax. Rewax these areas even ifthe rest of the vehicle doesn't need it.
Maintenance and Care
Appearance Care
8-63
Mazda3_8V66-EA-06F_Edition3 Page337Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (338,1)
qRepairing Damage to the Finish
Deep scratches or chips on the finishshould be repaired promptly. Exposedmetal quickly rusts and can lead to majorrepairs.
CAUTIONIf your Mazda is damaged and needsmetal parts repaired or replaced, makesure the body shop applies anti-corrosion materials to all parts, bothrepaired and new. This will preventthem from rusting.
qBright-Metal Maintenance
l Use tar remover to remove road tar andinsects. Never do this with a knife orsimilar tool.
l To prevent corrosion on bright-metalsurfaces, apply wax or chromepreservative and rub it to a high luster.
l During cold weather or in coastal areas,cover bright-metal parts with a coatingof wax or preservative heavier thanusual. It would also help to coat themwith noncorrosive petroleum jelly orsome other protective compound.
CAUTIONDon't use steel wool, abrasive cleaners,or strong detergents containing highlyalkaline or caustic agents on chrome-plated or anodized aluminum parts.This may result in damage to theprotective coating and causediscoloration or paint deterioration.
qUnderbody Maintenance
Road chemicals and salt used for ice andsnow removal and solvents used for dustcontrol may collect on the underbody. Ifnot removed, they will speed up rustingand deterioration of such underbody partsas fuel lines, frame, floor pan, and exhaustsystem, even though these parts may becoated with anti-corrosive material.
Thoroughly flush the underbody andwheel housings with lukewarm or coldwater at the end of each winter. Try alsoto do this every month.
Pay special attention to these areasbecause they easily hide mud and dirt. Itwill do more harm than good to wetdown the road grime without removingit.
The lower edges of doors, rocker panels,and frame members have drain holes thatshould not be clogged. Water trappedthere will cause rusting.
WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal.
8-64
Maintenance and Care
Appearance Care
Mazda3_8V66-EA-06F_Edition3 Page338Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (339,1)
qAluminumWheel Maintenance
A protective coating is provided over thealuminum wheels. Special care is neededto protect this coating.
NOTE
l Don't use a wire brush or anyabrasive cleaner, polishingcompound, or solvent on aluminumwheels. They may damage thecoating.
l Only use a mild soap or neutraldetergent and always use a sponge orsoft cloth to clean the wheels.Rinse thoroughly with lukewarm orcold water. Also, be sure to clean thewheels after driving on dusty orsalted roads. This helps preventcorrosion.
l Avoid washing your vehicle in anautomatic car wash that uses high-speed or hard brushes.
l If your aluminum wheels lose luster,wax the wheels.
Interior Care
qDashboard Precautions
Prevent caustic solutions such as perfumeand cosmetic oils from contacting thedashboard. They'll damage and discolor it.If these solutions get on the dashboard,wipe them off immediately.
CAUTIONDo not use glazing agents.Glazing agents contain ingredientswhich may cause discoloration,wrinkling, cracks and peeling.
qCleaning the Upholstery andInterior Trim
Vinyl
Remove dust and loose dirt from vinylwith a whisk broom or vacuum cleaner.Clean vinyl with a leather-and-vinylcleaner.
Leatherí
Real leather isn't uniform and may havescars, scratches, and wrinkles. Clean itwith a leather cleaner or mild soap.
Wipe it with a damp soft cloth; then dryand buff it with a dry soft cloth.
Fabric
Remove dust and loose dirt from fabricwith a whisk broom or vacuum cleaner.Clean it with a mild soap solution goodfor upholstery and carpets. Remove freshspots immediately with a fabric spotcleaner.
Maintenance and Care
Appearance Care
8-65íSome models.
Mazda3_8V66-EA-06F_Edition3 Page339Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (340,1)
To keep the fabric looking clean andfresh, take care of it. Otherwise its colorwill be affected, it can be stained easily,and its fire-resistance may be reduced.
CAUTIONUse only recommended cleaners andprocedures. Others may affectappearance and fire-resistance.
Piano black panelí
The following parts are fitted with panelsthat have been treated with a specialcoating that resists scratching.
l Instrument panel side garnish
l Steering wheel (partial)
When the panel needs to be cleaned, use asoft cloth to wipe off dirt from the surface.
NOTE
Scratches or nicks on the panelsresulting from the use of a hard brush orcloth may not be repairable.
qCleaning the Lap/Shoulder BeltWebbing
Clean the webbing with a mild soapsolution recommended for upholstery orcarpets. Follow instructions. Don't bleachor dye the webbing; this may weaken it.
After cleaning the belts, thoroughly drythe belt webbing and make sure there isno remaining moisture before retractingthem.
WARNINGDamaged Seat Belt:Using damaged seat belts isdangerous. In a collision, damagedbelts cannot provide adequateprotection. Have an Authorized MazdaDealer replace damaged beltsimmediately.
qCleaning the Window Interiors
If the windows become covered with anoily, greasy, or waxy film, clean themwith glass cleaner. Follow the directionson the container.
CAUTIONDon't scrape or scratch the inside of therear window. You may damage the rearwindow defroster grid.
8-66
Maintenance and Care
íSome models.
Appearance Care
Mazda3_8V66-EA-06F_Edition3 Page340Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (341,1)
9 Customer Information and ReportingSafety Defects
Important consumer information including warranties and add-on equipment.
Customer Assistance ............................... 9-2Customer Assistance (U.S.A.) ............ 9-2Customer Assistance (Canada) ........... 9-4Customer Assistance (Puerto Rico) .... 9-7Customer Assistance (Mexico) ........... 9-8
Mazda Importer/Distributors ............... 9-10Importer/Distributor .......................... 9-10Distributor in Each Area ................... 9-10
Warranty ................................................ 9-12Warranties for Your Mazda ............... 9-12Outside the United States .................. 9-13Outside Canada ................................. 9-14Registering Your Vehicle in A ForeignCountry (Except United States andCanada) ............................................. 9-15Add-On Non-Genuine Parts andAccessories ....................................... 9-16
Cell Phones ............................................. 9-17Cell Phones Warning ......................... 9-17
Type Approval of Equipment ............... 9-18Type Approval of Equipment ............ 9-18
Uniform Tire Quality Grading System(UTQGS) ................................................ 9-20
Uniform Tire Quality Grading System(UTQGS) .......................................... 9-20
Tire Information (U.S.A.) ..................... 9-22Tire Labeling ..................................... 9-22Location of the Tire Label(Placard) ............................................ 9-28Tire Maintenance .............................. 9-31Vehicle Loading ................................ 9-34Steps for Determining the Correct LoadLimit: ................................................ 9-41
Reporting Safety Defects ....................... 9-42Reporting Safety Defects (U.S.A.) .... 9-42Reporting Safety Defects (Canada) ... 9-43
Service Publications .............................. 9-44Service Publications .......................... 9-44
9-1
Mazda3_8V66-EA-06F_Edition3 Page341Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (342,1)
Customer Assistance (U.S.A.)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:
NOTE
If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, contact an Authorized Mazda Dealer.
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue.
l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER ofthe dealership or the OWNER.
l If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, go to STEP2.
qSTEP 2: Contact Mazda North American Operations
If for any reason you feel the need for further assistance after contacting your dealershipmanagement and it becomes necessary to have the components or wiring system for thesupplementary restraint system modified to accommodate a person with certain medicalconditions in accordance with a certified physician, you can reach Mazda North AmericanOperations by one of the following ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership inthe U.S., can be found here.
E-mail: click on “Contact Us” at the bottom of the page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
9-2
Customer Information and Reporting Safety Defects
Customer Assistance
Mazda3_8V66-EA-06F_Edition3 Page342Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (343,1)
By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the followinginformation:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
Customer Information and Reporting Safety Defects
Customer Assistance
9-3
Mazda3_8V66-EA-06F_Edition3 Page343Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (344,1)
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All AuthorizedMazda Dealers have both the knowledge and tools to keep your Mazda in top condition. Inour experience, any questions, problems, or complaints regarding the operation of yourMazda or any other general service transactions are most effectively resolved by yourdealer. If the cause of your dissatisfaction cannot adequately be addressed by normaldealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer
Discuss the matter with a member of dealership management. If the Service Manager hasalready reviewed your concerns, contact the owner of the dealership or its GeneralManager.
qSTEP 2: Contact the Mazda Regional Office
If you feel that you still require assistance, ask the dealer Service Manager to arrange foryou to meet the local Mazda Service Representative. If more expedient, contact MazdaCanada Inc.Regional Office nearest you for such arrangements. Regional Office addressand phone numbers are shown (page 9-6).
qSTEP 3: Contact the Mazda Customer Relations Department
If still not substantially satisfied, contact the Customer Relations Department, MazdaCanada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)263-4680.Provide the Department with the following information:
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” pageof section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will reviewthe case to determine if everything possible has been done to ensure your satisfaction.
9-4
Customer Information and Reporting Safety Defects
Customer Assistance
Mazda3_8V66-EA-06F_Edition3 Page344Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (345,1)
Please recognize that the resolution of service problems in most cases requires the use ofyour Mazda dealer's service facilities, personnel and equipment. We urge you to follow theabove three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's CustomerSatisfaction Program. If after exhausting the procedures in this manual your concern is stillnot resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by theCanadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you abouthow your concern may be reviewed and resolved by an independent third party throughbinding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.Mazda's participation in CAMVAP makes a valuable contribution to our achieving thatgoal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as theaward is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)
If a specific item of concern arises, where a solution cannot be reached between an owner,Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wishto use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in schedulingand preparing for their arbitration hearings. However, before you can proceed withCAMVAP you must follow your Mazda dispute resolution process as outlined previously.
Customer Information and Reporting Safety Defects
Customer Assistance
9-5
Mazda3_8V66-EA-06F_Edition3 Page345Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (346,1)
CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan235 Yorkland Boulevard, suite 300North York, OntarioM2J 4Y8http://camvap.caProvincial Administrators may be reached locally as listed below:
Province/Territory CAMVAP Number
British Columbia & Yukon Territories 1 (800) 207-0685
Alberta & Northwest Territories 1 (800) 207-0685
Saskatchewan 1 (800) 207-0685
Manitoba 1 (800) 207-0685
Ontario 1 (800) 207-0685
Atlantic Canada 1 (800) 207-0685
Quebec 1 (800) 207-0685
qRegional Offices
REGIONAL OFFICES AREAS COVERED
MAZDA CANADA INC.WESTERN REGION
8171 ACKROYD ROADSUITE 2000
RICHMOND B.C.V6X 3K1
(604) 303-5670
ALBERTA,BRITISH COLUMBIA,
MANITOBA,SASKATCHEWAN,
YUKON
MAZDA CANADA INC.CENTRAL/ATLANTIC REGION
55 VOGELL ROAD,RICHMOND HILL,ONTARIO, L4B 3K5
(905) 787-7000
ONTARIO
MAZDA CANADA INC.QUEBEC REGION
6111 ROUTE TRANSCANADIENNE
POINTE CLAIRE, QUEBECH9R 5A5
(514) 694-6390
QUEBEC,NEW BRUNSWICK,NOVA SCOTIA,
PRINCE EDWARD ISLAND,NEWFOUNDLAND
9-6
Customer Information and Reporting Safety Defects
Customer Assistance
Mazda3_8V66-EA-06F_Edition3 Page346Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (347,1)
Customer Assistance (Puerto Rico)Your complete and permanent satisfaction is our business. That is why all AuthorizedMazda Dealers have the knowledge and the tools to keep your Mazda vehicle in topcondition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:
qSTEP 1
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,SALES, SERVICE, or PARTS MANAGER, then please contact the GENERALMANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact yourarea's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
Customer Information and Reporting Safety Defects
Customer Assistance
9-7
Mazda3_8V66-EA-06F_Edition3 Page347Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (348,1)
Customer Assistance (Mexico)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue.
l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER ofthe dealership or the OWNER.
l If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, go to STEP2.
qSTEP 2: Contact Mazda Motor de Mexico
If for any reason you feel the need for further assistance after contacting your dealershipmanagement and it becomes necessary to have the components or wiring system for thesupplementary restraint system modified to accommodate a person with certain medicalconditions in accordance with a certified physician, you can reach Mazda Motor de Mexicoby one of the following ways.
Log on: at www.MazdaMexico.com.mx
Answers to many questions, including how to locate or contact a local Mazda dealership inMexico, can be found here.
E-mail: click on “Contactanos” at the top of the page at www.MazdaMexico.com.mx
By phone at: 1 (866) 315 0220
9-8
Customer Information and Reporting Safety Defects
Customer Assistance
Mazda3_8V66-EA-06F_Edition3 Page348Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (349,1)
By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the followinginformation:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
Customer Information and Reporting Safety Defects
Customer Assistance
9-9
Mazda3_8V66-EA-06F_Edition3 Page349Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (350,1)
Importer/Distributor
qU.S.A.
Mazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.)
Distributor in Each Area
qCANADA
Mazda Canada Inc.55 Vogell Road, Richmond Hill,Ontario, L4B 3K5 CanadaTEL: 1 (800) 263-4680 (in Canada)(905) 787-7000 (outside Canada)
qPUERTO RICO/U.S. Virgin Island
Plaza Motors Corp. (Mazda de PuertoRico)P.O. Box 362722, San Juan, Puerto Rico00936-2722TEL: (787) 641-9300
qMEXICO
Mazda Motor de MexicoCircuito Guillermo Gonzalez Camarena N1500 Col. Centro de Ciudad Santa Fe.01210, Mexico, D.F.TEL: Center of Attention to Clients:01 (800) 016 2932. in Mexico
qGUAM
Triple J Motors157 South Marine Drive, Tamuning,GUAM 96911 USAP.O. Box 6066 Tamuning, Guam 96931TEL: (671) 649-6555
qSAIPAN
Pacific International Marianas, Inc.(d.b.a. Midway Motors)P.O. Box 887 Saipan, MP 96950TEL: (670) 234-7524
9-10
Customer Information and Reporting Safety Defects
Mazda Importer/Distributors
Mazda3_8V66-EA-06F_Edition3 Page350Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (351,1)
Triple J Saipan, Inc.(d.b.a. Triple J Motors)P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051
qAMERICAN SAMOA
Polynesia Motors, Inc.P.O. Box 1120, Pago Pago, AmericanSamoa 96799TEL: (684) 699-9347
Customer Information and Reporting Safety Defects
Mazda Importer/Distributors
9-11
Mazda3_8V66-EA-06F_Edition3 Page351Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (352,1)
Warranties for Your Mazdal New Vehicle Limited Warranty
l Distributor Major Component Limited Warranty (Canada only)
l Safety Restraint System Limited Warranty
l Anti-perforation Limited Warranty
l Federal Emission Control Warranty (U.S.A. only)
l Emission Defect Warrantyl Emission Performance Warranty
l California Emission Control Warranty (U.S.A. only)
l Emission Control Warranty (Canada only)
l Replacement Parts and Accessories Limited Warranty
l Tire Warranty
NOTE
Detailed warranty information is provided with your Mazda.
9-12
Customer Information and Reporting Safety Defects
Warranty
Mazda3_8V66-EA-06F_Edition3 Page352Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (353,1)
Outside the United StatesGovernment regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside the United States. However, in the event that you are moving to Canadapermanently, Mazda vehicles built for use in the United States could be eligible forexportation to Canada with specific vehicle modifications to comply with the CanadianMotor Vehicle Safety requirements (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related totravelers on vacation.
You may have the following problems if you do take your vehicle outside of the UnitedStates:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.
Please refer to your Manufacturer's Warranty Booklet for more information.
Customer Information and Reporting Safety Defects
Warranty
9-13
Mazda3_8V66-EA-06F_Edition3 Page353Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (354,1)
Outside CanadaGovernment regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside Canada. However, in the event that you are moving to the United Statespermanently, Mazda vehicles built for use in Canada could be eligible for exportation to theUnited States with specific vehicle modifications to comply with the United States FederalMotor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related totravelers on vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.
l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-14
Customer Information and Reporting Safety Defects
Warranty
Mazda3_8V66-EA-06F_Edition3 Page354Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (355,1)
Registering Your Vehicle in A Foreign Country (ExceptUnited States and Canada)
Government regulations in your country could require that automobiles meet specificemission and safety standards.Vehicles built for your country may differ from those built for other countries. In additionto registration problems, satisfactory service may be difficult or even impossible in anothercountry.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may beunavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take yourvehicle.
The Mazda warranty is valid only in certain countries.
Customer Information and Reporting Safety Defects
Warranty
9-15
Mazda3_8V66-EA-06F_Edition3 Page355Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (356,1)
Add-On Non-Genuine Parts and AccessoriesNon-genuine parts and accessories for Mazda vehicles can be found in stores.These may fit your vehicle, but they are not approved by Mazda for use with Mazdavehicles. When you install non-genuine parts or accessories, they could affect yourvehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before youinstall any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNINGInstallation of Non-Genuine Parts or Accessories:Installation of non-genuine parts or accessories is dangerous. Improperly designedparts or accessories could seriously affect your vehicle's performance or safetysystems. This could cause you to have an accident or increase your chances of injuriesin an accident. Always consult an Authorized Mazda Dealer before you install non-genuine parts or accessories.
Add-On Electrical and Electronic Equipment:Incorrectly choosing or installing improper add-on equipment or choosing animproper installer is dangerous. Essential systems could be damaged, causing enginestalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.Be very careful in choosing and installing add-on electrical equipment, such as mobiletelephones, two-way radios, stereo systems, and car alarm systems.
Mazda assumes no responsibility for death, injury, or expenses that may result from theinstallation of add-on non-genuine parts or accessories.
9-16
Customer Information and Reporting Safety Defects
Warranty
Mazda3_8V66-EA-06F_Edition3 Page356Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (357,1)
Cell Phones Warning
WARNINGUse of Cell Phones and Other Devices by Driver:Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver while the vehicle is moving is dangerous.Dialing a number on a cell phone while driving also ties-up the driver's hands. Use ofthese devices will cause the driver to be distracted and could lead to a serious accident.If a passenger is unable to use the device, pull off the right-of-way to a safe areabefore use. If use of a cell phone is necessary despite this warning, use a hands-freesystem to at least leave the hands free to drive the vehicle. Never use a cell phone orother electrical devices while the vehicle is moving and, instead, concentrate on thefull-time job of driving.Please comply with the legal regulations concerning the use of communicationequipment in vehicles in your country.
Customer Information and Reporting Safety Defects
Cell Phones
9-17
Mazda3_8V66-EA-06F_Edition3 Page357Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (358,1)
Type Approval of Equipment
Immobilizer system
9-18
Customer Information and Reporting Safety Defects
Type Approval of Equipment
Mazda3_8V66-EA-06F_Edition3 Page358Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (359,1)
Keyless entry system
Customer Information and Reporting Safety Defects
Type Approval of Equipment
9-19
Mazda3_8V66-EA-06F_Edition3 Page359Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (360,1)
Uniform Tire Quality Grading System (UTQGS)This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when testedunder controlled conditions on a specified government test course.For example, a tire graded 150 would wear one-and-a-half times as well on the governmentcourse as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,and may depart significantly from the norm because of variations in driving habits, servicepractices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades representthe tire's ability to stop on wet pavement as measured under controlled conditions onspecified government test surfaces of asphalt and concrete. A tire marked C may have poortraction performance.
WARNINGThe traction grade assigned to this tire is based on braking (straight ahead) tractiontests and does not include acceleration cornering (turning), hydroplaning, or peaktraction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to thegeneration of heat and its ability to dissipate heat when tested under controlled conditionson a specified indoor laboratory test wheel.Sustained high temperature can cause the material of the tire to degenerate and reduce tirelife, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meetunder the Federal Motor Vehicle Safety Standard No. 109. Grades B and A representhigher levels of performance on the laboratory test wheel than the minimum required bylaw.
9-20
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
Mazda3_8V66-EA-06F_Edition3 Page360Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (361,1)
WARNINGThe temperature grade for this tire is established for a tire that is properly inflated andnot overloaded. Excessive speed, underinflation, or excessive loading, eitherseparately or in combination, can cause heat buildup and possible tire failure.
These grades will be added to the sidewalls of passenger vehicle tires over the next severalyears according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may varywith respect to grade.
ALL PASSENGERVEHICLE TIRES MUST CONFORM TO THESE GRADES ANDTO ALL OTHER FEDERALTIRE-SAFETY REQUIREMENTS.
qUniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulderand maximum section width.For example:Treadwear 200 Traction AATemperature A
TREADWEAR 200 TRACTION AA TEMPERATURE A
UTQGS MARK (example)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
9-21
Mazda3_8V66-EA-06F_Edition3 Page361Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (362,1)
Tire LabelingFederal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certification and in case ofa recall.
qInformation on Passenger Vehicle Tires
Please refer to the diagram below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Rim diameter code
7. Load index & speed symbol
8. Severe snow conditions
9. Tire ply composition and materials used
10. Max. load rating
9-22
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page362Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (363,1)
11. Tread wear, traction and temperature grades
12. Max. permissible inflation pressure
13. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by eitherETRTO (European Tire and Rim Technical Organization) or JATMA (Japan TireManufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.
65
“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
“R” is the tire construction symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight eachtire can support.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-23
Mazda3_8V66-EA-06F_Edition3 Page363Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (364,1)
H
“H” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.
Letter Rating Speed Rating
Q 99 mph
R 106 mph
S 112 mph
T 118 mph
U 124 mph
H 130 mph
V 149 mph
W 168* mph
Y 186* mph
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. Fortires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M+S or M/S: Mud and Snow
AT: All Terrain.AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use inmud and snow.
U.S. DOT Tire Identification Number (TIN)
This begins with the letters “DOT” which indicates the tire meets all federal standards. Thenext two numbers or letters are the plant code where it was manufactured, and the last fournumbers represent the week and year the tire was manufactured. For example, the numbers457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,the number 2102 means the 21th week of 2002. The other numbers are marketing codesused at the manufacturer's discretion. This information is used to contact consumers if a tiredefect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. Ingeneral, the greater the number of plies, the more weight a tire can support. Tiremanufacturers also must indicate the tire materials, which include steel, nylon, polyester,and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried bythe tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire undernormal driving conditions.
9-24
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page364Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (365,1)
Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tirewhen tested under controlled conditions on a specified government test course. Forexample, a tire graded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded 100.Traction: The traction grades, from highest to lowest are AA, A, B, and C. The gradesrepresent the tire's ability to stop on wet pavement as measured under controlled conditionson specified government test surfaces of asphalt and concrete. A tire marked C may havepoor traction performance.Temperature: The temperature grades are A (the highest), B and C, representing the tire'sresistance to the generation of heat and its ability to dissipate heat when tested undercontrolled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with verydeeply cut tread. These tires should only be used in pairs or placed on all four wheels.Make sure you purchase snow tires that are the same size and construction type as the othertires on your vehicle.
SAFETYWARNING
The following safety warning appears on the tire's sidewall.SERIOUS INJURY MAY RESULT FROM:
l EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNTTIRES.
l TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLYCHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-25
Mazda3_8V66-EA-06F_Edition3 Page365Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (366,1)
qInformation on Temporary Tires
Please refer to the diagram below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
6. Load index&speed symbol
T115/70D 16 90M is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).
115
“115” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.
9-26
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page366Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (367,1)
70
“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
D
“D” is the tire construction symbol. D indicates “diagonal ply construction”.
16
“16” is the wheel rim diameter in inches.
90
“90” is the Load Index. This two-or three-digit number indicates how much weight eachtire can support.
M
“M” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.
Letter Rating Speed Rating
M 81 mph
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-27
Mazda3_8V66-EA-06F_Edition3 Page367Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (368,1)
Location of the Tire Label (Placard)You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door frame.
SAMPLE
qRecommended Tire Inflation Pressure
On the tire label you will find the recommended tire inflation pressure in both kPa and psifor the tires installed as original equipment on the vehicle. It is very important that theinflation pressure of the tires on your vehicle is maintained at the recommended pressure.You should check the tire pressure regularly to insure that the proper inflation pressure ismaintained.Refer to Tires on page 10-8.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate therecommended cold tire inflation pressure, measured when the tires are cold, after thevehicle has been parked for at least 3 hours. As you drive, the temperature in the tirewarms up, increasing the tire pressure.
9-28
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page368Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (369,1)
WARNINGTire Under-Inflation:Driving your vehicle with under-inflated tires is dangerous.Under-inflation is the most common cause of failures in any kind of tire and mayresult in severe cracking, tread separation or “blowout”, with unexpected loss ofvehicle control and increased risk of injury. Under-inflation increases sidewall flexingand rolling resistance, resulting in heat buildup and internal damage to the tire. Itresults in unnecessary tire stress, irregular wear, loss of control and accidents. A tirecan lose up to half of its air pressure and not appear to be flat!It is impossible to determine whether or not tires are properly inflated just by lookingat them.Always check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conjunction with theinformation in this owner's manual.
qChecking Tire Pressure
1. When you check the air pressure, make sure the tires are cold ―meaning they are nothot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of thevalve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded thatcould poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or otherirregularities.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-29
Mazda3_8V66-EA-06F_Edition3 Page369Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (370,1)
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tiresto adjust the pressure.Under-inflation can cause serious failures and accidents.Over-inflation can produce a harsh ride and the greater possibility of damage from roadhazards.
qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, andthe maximum weight the vehicle can carry.Tire Identification Number (TIN): A number on the sidewall of each tire providinginformation about the tire brand and manufacturing plant, tire size, and date ofmanufacture.Inflation Pressure: A measure of the amount of air in a tire.kPa: Kilopascal, the metric unit for air pressure.psi: Pounds per square inch, the English unit for air pressure.B-pillar: The structural member at the side of the vehicle behind the front door.Original Equipment (OE): Describes components originally equipped on the vehicle.Vehicle Load Limit: The maximum value of the combination weight of occupants andcargo.Bead Area of the Tire: Area of the tire next to the rim.Sidewall Area of the Tire: Area between the bead area and the tread.Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it'smounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacityis described on the tire label.
Production options weight is the combination weight of installed regular productionoptions weighing over 2.3 kilograms in excess of the standard items which they replace,and not previously considered in the curb weight or accessory weight, including heavyduty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tirebeads are seated.
9-30
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page370Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (371,1)
Tire MaintenanceImproper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points:
qTire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for the best ride, top handling, and minimum tire wear. Use thepressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregularwear develops. During rotation, inspect them for correct balance.
Forward
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or acombination of the following:
l Incorrect tire pressure
l Improper wheel alignment
l Out-of-balance wheel
l Severe braking
After rotation, inflate all tire pressures to specification (page 10-8) and inspect the lug nutsfor tightness.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-31
Mazda3_8V66-EA-06F_Edition3 Page371Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (372,1)
CAUTIONRotate unidirectional tires and radial tires that have an asymmetrical tread pattern orstuds only from front to rear, not from side to side. Tire performance will be weakened ifrotated from side to side.
(With limited-slip differential)Don't use the following:
l Tires not of the designated size
l Tires of different sizes or types at the same time
l Tires not sufficiently inflated
If these instructions aren't followed, the rotation of the left and right wheels will bedifferent and will thus apply a constant load on the limited-slip differential.This will cause a malfunction.
qReplacing a Tire
WARNINGWorn Tires:Driving with worn tires is dangerous. Reduced braking, steering, and traction couldresult in an accident. Always use tires that are in good condition.
If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replacethe tire when this happens.
New tread
Tread wear indicator
Worn tread
You should replace it before the band is across the entire tread.
9-32
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page372Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (373,1)
NOTE
Tires degrade over time, even when they are not being used on the road. It isrecommended that tires generally be replaced when they are 6 years or older. Heatcaused by hot climates or frequent high loading conditions can accelerate the agingprocess. You should replace the spare tire when you replace the other road tires due tothe aging of the spare tire. Regarding the manufacturing week and year is indicated with4 digit. Refer to The tire labeling on page 9-22.
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivategood driving habits for your own benefit.
l Observe posted speed limits
l Avoid fast starts, stops and turns
l Avoid potholes and objects on the road
l Do no run over curbs or hit the tire against the curb when parking
CAUTIONIf you feel a sudden vibration or ride disturbance while driving or you suspect your tireor vehicle has been damaged, immediately reduce your speed. Drive with caution untilyou can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-inflated or damaged, deflate it, remove the tire and rim and replace it with your sparetire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tiredealer to have the vehicle inspected.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-33
Mazda3_8V66-EA-06F_Edition3 Page373Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (374,1)
Vehicle Loading
WARNINGDo not taw a trailer with this vehicle:Towing a trailer with this vehicle is dangerous because it has not been designed to towa trailer and doing so will affect the drive system which could result in vehicledamage.
This section will guide you in the proper loading of your vehicle and/or trailer, to keepyour loaded vehicle weight within its design rating capability, with or without a trailer.Properly loading your vehicle will provide maximum return of vehicle design performance.Before loading your vehicle, familiarize yourself with the following terms for determiningyour vehicle's weight ratings, with or without a trailer, from the vehicle's SafetyCertification Label and Tire and Load Information Label:
WARNINGOverloaded Vehicle:Overloading a vehicle is dangerous. The results of overloading can have seriousconsequences in terms of passenger safety. Too much weight on a vehicle's suspensionsystem can cause spring or shock absorber failure, brake failure, handling or steeringproblems, irregular tire wear, tire failure or other damage.Overloading makes a vehicle harder to drive and control. It also increases the distancerequired for stopping. In cases of serious overloading, brakes can fail completely,particularly on steep grades. The load a tire will carry safely is a combination of thesize of the tire, its load range, and corresponding inflation pressure.Never overload the vehicle and always observe the vehicle's weight ratings from thevehicle's Safety Certification and Tire and Load Information labels.
9-34
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page374Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (375,1)
Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from yourdealer plus any aftermarket equipment.
PAYLOAD
Payload is the combination weight of cargo and passengers that the vehicle is designed tocarry. The maximum payload for your vehicle can be found on the Tire and LoadInformation label on the driver's door frame or door pillar. Look for “THECOMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVEREXCEED XXX kg or XXX lbs” for your maximum payload. The payload listed on the tirelabel is the maximum payload for the vehicle as built by the assembly plant. If anyaftermarket or dealer installed equipment has been installed on the vehicle, the weight ofthe equipment must be subtracted from the payload listed on the tire label in order to beaccurate.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-35
Mazda3_8V66-EA-06F_Edition3 Page375Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (376,1)
SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo andoptional equipment. When towing, trailer tongue load or king pin weight is also part ofcargo weight.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargoweight limit can be calculated by subtracting the total weight of the vehicle occupants fromthe “combination weight of occupants and cargo should never exceed” value on the tirelabel.
9-36
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page376Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (377,1)
Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the“combination weight of occupants and cargo should never exceed”:The cargo weight limit with one occupant is 385 kg _ 68 kg = 317 kgThe cargo weight limit with two occupants is 385 kg _ (68 × 2) kg = 249 kgIf the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carriedby a single axle (front or rear). These numbers are shown on the Safety ComplianceCertification Label located on the driver's door frame or door pillar. The total load oneach axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight + cargo + passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fullyloaded vehicle (including all options, equipment, passengers and cargo). The GVWR isshown on the Safety Compliance Certification Label located on the driver's doorframe or door pillar. The GVW must never exceed the GVWR.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-37
Mazda3_8V66-EA-06F_Edition3 Page377Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (378,1)
SAMPLE
WARNINGExceeding Axle Weight Rating Limits:Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in death or serious injury as a result of substandard vehicle handling,performance, engine, transmission and/or structural damage, serious damage to thevehicle, or loss of control.Always keep the vehicle within the axle weight rating limits.
Do not taw a trailer with this vehicle:Towing a trailer with this vehicle is dangerous because it has not been designed to towa trailer and doing so will affect the drive system which could result in vehicledamage.
9-38
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page378Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (379,1)
GCW
GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus theweight of the fully loaded trailer.
GCWR (Gross Combination Weight Rating) is the maximum allowable weight of thevehicle and the loaded trailer - including all cargo and passengers - that the vehicle canhandle without risking damage. (Important: The towing vehicle's braking system is ratedfor operation at GVWR, not at GCWR. Separate functional brakes should be used for safecontrol of towed vehicles and for trailers weighing more than 1,500 lbs). The GCW mustnever exceed the GCWR.
Maximum Loaded Trailer Weight is the highest possible weight of a fully loaded trailerthe vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal orexternal), a tongue load of 10_15% (conventional trailer) or king pin weight of 15_25%(fifth-wheel trailer), and driver only (150 lbs). Consult your dealership (or the RVandTrailer Towing Guide provided by your dealership) for more detailed information.Tongue Load or Fifth-Wheel King Pin Weight refers to the amount of the weight that atrailer pushes down on a trailer hitch.
Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain aproper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-39
Mazda3_8V66-EA-06F_Edition3 Page379Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (380,1)
WARNINGExceeding GVWR or GAWR Specifications:Exceeding the GVWR or the GAWR specified on the certification label is dangerous.Exceeding any vehicle rating limitation could result in a serious accident, injury, ordamage to the vehicle.Do not use replacement tires with lower load carrying capacities than the originalsbecause they may lower the vehicle's GVWR and GAWR limitations. Replacementtires with a higher limit than the originals do not increase the GVWR and GAWRlimitations.Never exceed the GVWR or the GAWR specified on the certification label.
9-40
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Mazda3_8V66-EA-06F_Edition3 Page380Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (381,1)
Steps for Determining the Correct Load Limit:Steps for Determining Correct Load Limit:
(1) Locate the statement “The combination weight of occupants and cargo should neverexceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combination weight of the driver and passengers that will be riding inyour vehicle.
(3) Subtract the combination weight of the driver and passengers from XXX kg or XXXlbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity.For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lbpassengers in your vehicle, the amount of available cargo and luggage load capacity is650 lbs. (1400_ 750 (5 × 150) = 650 lbs.)
(5) Determine the combination weight of luggage and cargo being loaded on the vehicle.That weight may not safely exceed the available cargo and luggage load capacitycalculated in Step 4.
(6) If your vehicle will be towing a trailer, the load from your trailer will be transferred toyour vehicle. Consult this manual to determine how this reduces the available cargoand luggage load capacity of your vehicle.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
9-41
Mazda3_8V66-EA-06F_Edition3 Page381Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (382,1)
Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if itfinds that a safety defect exists in a group of vehicles, it may order a recall andremedy campaign. However, NHTSA cannot become involved in individualproblems between you, your dealer, or Mazda Motor Corporation (Your MazdaImporter/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) ; go to http://www.safercar.gov; or write to:Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. Youcan also obtain other information about motor vehicle safety from http://www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should beforwarded to:
Mazda North American Operations7755 Irvine Center DriveIrvine, California 92618-2922P.O. Box 19734Irvine, CA 92623-9734Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown(page 9-10) in this booklet.
9-42
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Mazda3_8V66-EA-06F_Edition3 Page382Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (383,1)
Reporting Safety Defects (Canada)Canadian customers who wish to report a safety-related defect to Transport Canada, DefectInvestigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contactTransport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:http://www.tc.gc.ca/roadsafety/menu.htm
Customer Information and Reporting Safety Defects
Reporting Safety Defects
9-43
Mazda3_8V66-EA-06F_Edition3 Page383Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (384,1)
Service PublicationsFactory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair.
When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below.
If they don't have what you need in stock, they can order it for you.
PUBLICATION ORDER NUMBER PUBLICATION DESCRIPTION
9999-95-017B-07 2007 WORKSHOP MANUAL (English)
9999-MX-017B-07 2007 WORKSHOP MANUAL (Spanish)
9999-95-019G-07 2007 WIRING DIAGRAM (English)
9999-MX-019G-07 2007 WIRING DIAGRAM (Spanish)
9999-95-038C-07 (U.S.A. only) 2007 OWNER'S MANUAL
9999-EC-038C-07 (Canada only) 2007 OWNER'S MANUAL
9999-PR-038C-07 (Puerto Rico, Mexico only) 2007 OWNER'S MANUAL
qWORKSHOP MANUAL:
Covers recommended maintenance and repair procedures of the drive train, body andchassis.
qWIRING DIAGRAM:
Provides electrical schematics as well as component location for the entire electricalsystem.
qOWNER'S MANUAL:
This booklet contains information regarding the proper care and operation of your vehicle.This is not a technician's manual.
9-44
Customer Information and Reporting Safety Defects
Service Publications
Mazda3_8V66-EA-06F_Edition3 Page384Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (385,1)
10 Specifications
Technical information about your Mazda.
Identification Numbers ............................................................... 10-2Vehicle Information Labels ..................................................... 10-2
Specifications ............................................................................... 10-4Specifications .......................................................................... 10-4
10-1
Mazda3_8V66-EA-06F_Edition3 Page385Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (386,1)
Vehicle Information Labels
qVehicle Identification Number
The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached to the cowl panel locatedon the left corner of the dashboard. Thisplate can easily be seen through thewindshield.
qMotor Vehicle Safety Standard Label
qChassis Number
qVehicle Emission ControlInformation Label
Without turbocharger
10-2
Identification Numbers
Mazda3_8V66-EA-06F_Edition3 Page386Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (387,1)
With turbocharger
qTire Pressure Label
qEngine Number
Without turbocharger
Forward
With turbocharger
Forward
Identification Numbers
10-3
Mazda3_8V66-EA-06F_Edition3 Page387Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (388,1)
Specifications
qEngine
Item
Specification
Without turbochargerWith turbocharger
2.0-liter engine 2.3-liter engine
Type DOHC-16V in-line, 4-cylinder
Bore×Stroke87.5 × 83.1 mm(3.44 × 3.27 in)
87.5 × 94.0 mm (3.44 × 3.70 in)
Displacement1,999 ml
(1,999 cc, 122.0 cu in)2,261 ml (2,261 cc, 137.9 cu in)
Compression ratio 10.0 9.7 9.5
qElectrical System
Item Classification
BatteryWithoutturbocharger
2.0-liter engine 12V-40AH/5HR, 12V-52AH/5HR
2.3-liter engine12V-40AH/5HR, 12V-52AH/5HR,
12V-55AH/5HR
With turbocharger 12V-48AH/5HR, 12V-55AH/5HR
Spark-plug numberWithout turbocharger LFG1 18 110*1, L3Y2 18 110
With turbocharger L3K9 18 110A*1, L3Y3 18 110
Spark-plug gapWithout turbocharger 1.25―1.35 mm (0.050―0.053 in)
With turbocharger 0.70―0.8 mm (0.028―0.031 in)
*1 ex factory
NOTE
When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating onthe iridium alloy and platinum tips could be damaged.
10-4
Specifications
Mazda3_8V66-EA-06F_Edition3 Page388Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (389,1)
qLubricant Quality
Lubricant Classification
Engine Refer to the recommended SAE viscosity numbers on page 8-18.
Manual transaxle oil
Without turbocharger
Any temperatureAPI Service GL-4 or GL-5
SAE 75W-90
Above 10°CAPI Service GL-4 or GL-5
SAE 80W-90
With turbochargerAPI Service GL-4
SAE 75W-90
Automatic transaxle fluid ATF M-V
Power steering fluid ATF M-III or equivalent (e.g. Dexron® III)
Brake/Clutch fluid SAE J1703 or FMVSS116 DOT-3
qCapacities
(Approximate Quantities)
Item Capacity
Engine oil
Without turbocharger
With oil filterreplacement
4.3 L (4.5 US qt, 3.8 Imp qt)
Without oil filterreplacement
3.9 L (4.1 US qt, 3.4 Imp qt)
With turbocharger
With oil filterreplacement
5.7 L (6.0 US qt, 5.0 Imp qt)
Without oil filterreplacement
5.3 L (5.6 US qt, 4.7 Imp qt)
Coolant 7.5 L (7.9 US qt, 6.6 Imp qt)
Manual transaxle oilWithout turbocharger 2.87 L (3.03 US qt, 2.53 Imp qt)
With turbocharger 2.5 L (2.6 US qt, 2.2 Imp qt)
Automatic transaxle fluid4-speed transaxle 7.2 L (7.6 US qt, 6.3 Imp qt)
5-speed transaxle 8.14 L (8.60 US qt, 7.16 Imp qt)
Fuel tank55.0 L
(14.5 US gal, 12.1 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
Specifications
10-5
Mazda3_8V66-EA-06F_Edition3 Page389Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (390,1)
qDimensions
ItemModel
4 Door 5 Door
Overall lengthWithoutturbocharger
STANDARD TYPE 4,505 mm (177.4 in) ―
SPORTY TYPE 4,510 mm (177.6 in) 4,490 mm (176.8 in)
With turbocharger ― 4,490 mm (176.8 in)
Overall widthWithoutturbocharger
Without side molding 1,745 mm (68.7 in) 1,745 mm (68.7 in)
With side molding 1,755 mm (69.1 in) 1,755 mm (69.1 in)
With turbocharger ― 1,765 mm (69.5 in)
Overall height 1,465 mm (57.7 in) 1,465 mm (57.7 in)
Front treadWithout turbocharger 1,530 mm (60.2 in) 1,530 mm (60.2 in)
With turbocharger ― 1,535 mm (60.4 in)
Rear treadWithout turbocharger 1,515 mm (59.6 in) 1,515 mm (59.6 in)
With turbocharger ― 1,525 mm (60.0 in)
Wheelbase 2,640 mm (103.9 in) 2,640 mm (103.9 in)
qWeights
4 Door
2.0-liter engine
ItemWeight
Manual transaxle Automatic transaxle
GVWR (Gross Vehicle Weight Rating) 1,719 kg (3,790 lbs) 1,733 kg (3,821 lbs)
GAWR (Gross Axle Weight Rating)Front 919 kg (2,026 lbs) 983 kg (2,068 lbs)
Rear 800 kg (1,764 lbs) 795 kg (1,753 lbs)
2.3-liter engine
ItemWeight
Manual transaxle Automatic transaxle
GVWR (Gross Vehicle Weight Rating) 1,764 kg (3,889 lbs) 1,792 kg (3,951 lbs)
GAWR (Gross Axle Weight Rating)Front 955 kg (2,105 lbs) 981 kg (2,163 lbs)
Rear 812 kg (1,790 lbs) 811 kg (1,788 lbs)
5 Door
Without turbocharger
ItemWeight
Manual transaxle Automatic transaxle
GVWR (Gross Vehicle Weight Rating) 1,783 kg (3,931 lbs) 1,811 kg (3,993 lbs)
GAWR (Gross Axle Weight Rating)Front 957 kg (2,110 lbs) 983 kg (2,167 lbs)
Rear 829 kg (1,828 lbs) 828 kg (1,825 lbs)
10-6
Specifications
Mazda3_8V66-EA-06F_Edition3 Page390Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (391,1)
With turbocharger
Item Weight
GVWR (Gross Vehicle Weight Rating) 1,866 kg (4,114 lbs)
GAWR (Gross Axle Weight Rating)Front 1,055 kg (2,326 lbs)
Rear 811 kg (1,788 lbs)
qAir Conditioner
Gas complies with SAE J639 Maximum operating charge
HFC134a (R-134a) 0.5 kg (1.1 lbs)
qLight Bulbs
Exterior light
Light bulbCategory
Wattage ECE R (SAE)
Headlights
High beam 60 HB3 (HB3)
Low beamHalogen 55 H7 (H7)
Xenon fusion 35 D2S (D2S)
Front turn signal lights/Side-marker lights 27/8 ― (#1157NA)
Fog lightsíType A 55 H11 (H11)
Type B 51 HB4 (HB4)
Side turn signal lights*1 5 WY5W (―)
High-mount brake light
4 Door 18 W16W (#921)
5 DoorNon-LED bulb 18 W16W (#921)
LED bulb*1 2.4 ― (―)
Rear turn signal lights 21 WY21W (―)
Brake lights/TaillightsNon-LED bulb 21/5 W21/5W (#7443)
LED bulb*2 4/1 ― (―)
Reverse lights 21 W21W (#7440)
License plate light 5 W5W (―)
*1 Bulb replacement is not possible because it is built into the unit. Replace the unit.*2 Bulb replacement is not possible. The rear combination component must be replaced.
Specifications
10-7íSome models.
Mazda3_8V66-EA-06F_Edition3 Page391Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (392,1)
Fog lights
Type A Type B
Interior light
Light bulbCategory
Wattage ECE R
Trunk light (4 Door)
5
W5W
Luggage compartment light (5 Door) ―
Overhead light/Map lights (Front)í W5W
Overhead light (Rear) 10 ―
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.When replacing tires, Mazda recommends that you replace tires of the same typeoriginally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressure.Refer to Tire Inflation Pressure on page 8-36.
Standard tire
Tire sizeInflation pressure
Front Rear
P195/65R15 89H 230 kPa (34 psi) 230 kPa (34 psi)
P205/55R16 89H 220 kPa (32 psi) 220 kPa (32 psi)
P205/50R17 88V 220 kPa (32 psi) 220 kPa (32 psi)
215/45R18 93Y 230 kPa (34 psi) 220 kPa (32 psi)
10-8 íSome models.
Specifications
Mazda3_8V66-EA-06F_Edition3 Page392Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (393,1)
Temporary spare tire
Tire size Inflation pressure
T115/70D15 90M
420 kPa (60 psi)T125/70D16 96M
T125/70D17 98M
qFuses
Refer to the fuse rating on page 8-52.
Specifications
10-9
Mazda3_8V66-EA-06F_Edition3 Page393Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (394,1)
10-10
Mazda3_8V66-EA-06F_Edition3 Page394Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (395,1)
11 Index
11-1
Mazda3_8V66-EA-06F_Edition3 Page395Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (396,1)
A
Accessory Socket .............................. 6-67Add-On Non-Genuine Parts andAccessories ....................................... 9-16Air Bag Systems ............................... 2-41Ambient Temperature Display .......... 6-56Antenna ............................................. 6-16Anti-Lock Brake System (ABS) ......... 5-6
Warning light ............................... 5-7Appearance Care ............................... 8-60Ashtray .............................................. 6-61Audio System ................................... 6-16
Audio control switch .................. 6-45Audio set .................................... 6-27Auxiliary Input ........................... 6-47Operating tips for audiosystem ........................................ 6-17Safety certification ..................... 6-51
Automatic TransaxleDriving tips ................................ 5-17Fluid ........................................... 8-25Manual shift mode ..................... 5-13Shift-lock override ..................... 5-13Shift-lock system ....................... 5-13Transaxle ranges ........................ 5-12
B
BatteryEmergency starting .................... 7-15Maintenance ............................... 8-33Specifications ............................. 10-4
Beep SoundsIgnition key reminder ................. 5-50Lights-on reminder ..................... 5-50Tire inflation pressure warningbeep ............................................ 5-50
BeepsSeat belt warning beep Sounds... 5-50
B
Before Starting the Engine .................. 4-6After getting in ............................. 4-6Before getting in .......................... 4-6
Body Lubrication .............................. 8-29Bottle Holder ..................................... 6-62Brake/Clutch
Fluid ........................................... 8-23Brakes
Anti-lock brake system (ABS) ..... 5-6Brakes assist ................................. 5-8Foot brake .................................... 5-4Parking brake ............................... 5-5Warning light ............................... 5-6
Break-In Period ................................... 4-7Bulb Replacement ............................. 8-41
C
Capacities .......................................... 10-5Carbon Monoxide ............................... 4-5Cargo Securing Loops ...................... 6-63Cargo Sub-Compartment .................. 6-64Catalytic Converter ............................. 4-4Cell Phones ....................................... 9-17Center Console .................................. 6-63Child Restraint
Child restraint precautions ......... 2-24Installing child-restraintsystems ....................................... 2-28LATCH child-restraintsystems ....................................... 2-36
Child Safety Locks for Rear Doors ... 3-11Cigarette Lighter ............................... 6-60Climate Control System ...................... 6-2
Gas specifications ...................... 10-7Clock ................................................. 6-56Cruise Control ................................... 5-19Cup Holder ........................................ 6-61
11-2
Index
Mazda3_8V66-EA-06F_Edition3 Page396Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (397,1)
C
Customer Assistance ........................... 9-2
D
Dashboard Illumination .................... 5-36Daytime Running Lights ................... 5-54Defroster
Rear window .............................. 5-60Dimensions ....................................... 10-6Door Locks ......................................... 3-9Driving In Flooded Area ................... 4-11Driving Tips ........................................ 4-7
Automatic transaxle ................... 5-17Break-in period ............................ 4-7Driving in flooded area .............. 4-11Hazardous driving ........................ 4-8Money-saving suggestions ........... 4-7Rocking the vehicle ...................... 4-9Turbocharged vehicles ............... 4-13Winter driving .............................. 4-9
Dynamic Stability Control (DSC) ..... 5-23DSC OFF indicator light ............ 5-24DSC OFF switch ........................ 5-24TCS/DSC Indicator light ............ 5-24
E
Emergency Starting ........................... 7-15Flooded engine ........................... 7-15Jump-starting .............................. 7-16Push-starting .............................. 7-19
Emergency Towing ........................... 7-20Emission Control System .................... 4-4
E
EngineCoolant ....................................... 8-21Exhaust gas .................................. 4-5Hood release .............................. 3-22Oil .............................................. 8-18Overheating ................................ 7-13Starting ......................................... 5-3
Engine Compartment Overview ........ 8-17Engine Coolant
Overheating ................................ 7-13Engine Coolant TemperatureGauge ................................................ 5-35Exhaust Gas ........................................ 4-5Exterior Care ..................................... 8-62
F
FlasherHazard warning .......................... 5-61Headlights .................................. 5-51
Flat Tire ............................................... 7-3Changing ...................................... 7-7Spare tire and tool storage ............ 7-3
Flexible Floor Board ......................... 6-64Fluids
Classification .............................. 10-5Owner maintenance ................... 8-15
Fog Lights ......................................... 5-55Foot Brake .......................................... 5-4Front Seats .......................................... 2-2Fuel
Filler lid and cap ........................ 3-21Gauge ......................................... 5-35Requirements ............................... 4-2Tank capacity ............................. 10-5
Fuses ................................................. 8-52Panel description ........................ 8-55Replacement ............................... 8-52
Index
11-3
Mazda3_8V66-EA-06F_Edition3 Page397Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (398,1)
G
Glove Box ......................................... 6-63
H
Hazard Warning Flasher .................... 5-61Hazardous Driving .............................. 4-8Headlights
Control ....................................... 5-51Flashing ...................................... 5-53High-low beam .......................... 5-53Leveling ..................................... 5-53On reminder ............................... 5-53
Hood Release .................................... 3-22Horn .................................................. 5-61
I
IgnitionKeys ............................................. 3-2Switch .......................................... 5-2
Illuminated Entry System ................. 6-52Immobilizer System .......................... 3-26Indicator Lights ................................. 5-37
Cruise ......................................... 5-48DSC OFF .................................... 5-47Headlight high-beam .................. 5-46Power steering malfunction ........ 5-48Security ...................................... 5-46Shift position .............................. 5-47TCS/DSC ................................... 5-47Turn-signal/hazard warning ....... 5-49
Information Display .......................... 6-55Ambient temperature display ..... 6-56Audio display ............................. 6-57Climate control display .............. 6-57Clock .......................................... 6-56Information display functions .... 6-55Trip computer ............................. 6-57
I
Inside Trunk Release Lever ............... 3-17Instrument Cluster ............................. 5-32Instrument Cluster Dimmer SelectButton ............................................... 5-36Interior Care ...................................... 8-65Interior Lights ................................... 6-52
J
Jump-Starting .................................... 7-16
K
Keyless Entry System ......................... 3-3Keys .................................................... 3-2
L
Label Information ............................. 10-2Lane-Change Signals ........................ 5-54Liftgate .............................................. 3-12
Luggage compartment ............... 3-13Light Bulbs
Replacement ............................... 8-41Specifications ............................. 10-7
Lighter ............................................... 6-60Lighting Control ............................... 5-51Lubricant Quality .............................. 10-5Luggage Compartment Light ............ 6-53
M
MaintenanceIntroduction .................................. 8-2Owner maintenanceprecautions ................................. 8-16Owner maintenance schedule ..... 8-15Scheduled ..................................... 8-3
11-4
Index
Mazda3_8V66-EA-06F_Edition3 Page398Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (399,1)
M
Manual Transaxle Operation ............... 5-9Recommendations for shifting.... 5-10
Map Lights ........................................ 6-53Mirrors
Outside mirrors .......................... 3-31Rearview mirror ......................... 3-32
Money-Saving Suggestions ................ 4-7Moonroof .......................................... 3-24
O
Odometer and Trip Meter .................. 5-33Outside Mirrors ................................. 3-31Overhead Lights ................................ 6-53Overheating ....................................... 7-13Overloading ...................................... 4-12
P
Paint Damage .................................... 8-60Parking Brake ..................................... 5-5Parking in an Emergency .................... 7-2Power Door Locks ............................ 3-10Power Steering .................................. 5-18
Fluid ........................................... 8-24Power steering malfunction indicatorlight ............................................ 5-18
Power Windows ................................ 3-19Push-Starting ..................................... 7-19
R
Rear Door Child Safety Locks .......... 3-11Rear Seat ............................................. 2-5Rear Window Defroster .................... 5-60Rear Window Washer ....................... 5-59Rear Window Wiper .......................... 5-59Rearview Mirror ................................ 3-32
R
Recreational Towing ......................... 7-22Registering Your Vehicle in A ForeignCountry ............................................. 9-15Rocking the Vehicle ............................ 4-9
S
Safety Defects, Reporting ................. 9-42Seat Belt System
Automatic locking ...................... 2-12Belt minder ................................. 2-22Center-rear position .................... 2-18Emergency locking .................... 2-12Except center-rear position ......... 2-13Extender ..................................... 2-21Pregnant women ........................ 2-12Pretensioner and load limiting .... 2-15Seat belt precautions .................. 2-10Warning light/beep ..................... 2-22
SeatsFront seat ...................................... 2-2Rear seat ....................................... 2-5
Security SystemImmobilizer system .................... 3-26Theft-deterrent system ............... 3-29
Service Publications .......................... 9-44Spare Tire and Tool Storage ................ 7-3Specifications .................................... 10-4Speedometer ...................................... 5-33SRS Air Bags
How the Air Bags Work ............. 2-49Supplemental restraint systemsprecautions ................................. 2-41
Starting the Engine .............................. 5-3Steering Wheel .................................. 3-31
Horn ........................................... 5-61
Index
11-5
Mazda3_8V66-EA-06F_Edition3 Page399Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (400,1)
S
Storage Compartments ...................... 6-63Cargo securing loops .................. 6-63Cargo sub-compartment ............. 6-64Center console ............................ 6-63Flexible Floor Board .................. 6-64Glove box ................................... 6-63
Sunshade ........................................... 3-25Sunvisors .......................................... 6-52
T
Tachometer ........................................ 5-35Temporary Spare Tire ....................... 8-38Theft-Deterrent System ..................... 3-29Tiedown
Hook .......................................... 7-21Tire Information ................................ 9-22Tire Pressure Monitoring System ...... 5-25
System error activation .............. 5-29Tire pressure monitoring systemwarning light .............................. 5-27Tires and wheels ......................... 5-29
TiresInflation pressure ........................ 8-36Replacement ............................... 8-37Rotation ...................................... 8-37Snow tires .................................. 4-10Spare tire and tool storage ............ 7-3Specifications ............................. 10-8Flat Tire ........................................ 7-3Tire chains .................................. 4-10Uniform tire quality grading system(UTQGS) ................................... 9-20
Tool ..................................................... 7-3
T
TowingDescription ................................. 7-20Emergency towing ..................... 7-20Recreational towing ................... 7-22Trailer towing ............................. 4-14
Traction Control System (TCS) ........ 5-22TCS/DSC indicator light ............ 5-23
Trailer Towing .................................. 4-14Trip Meter ......................................... 5-33Trunk Lid .......................................... 3-15Trunk Light ....................................... 3-16Turn and Lane-Change Signals ......... 5-54
V
Vanity Mirrors ................................... 6-52Vehicle Information Labels ............... 10-2
W
Warning Lights ................................. 5-37ABS ............................................ 5-39Air bag system ........................... 5-42Automatic transaxle ................... 5-44Brake system .............................. 5-39Charging system ......................... 5-40Check engine .............................. 5-41Door-ajar .................................... 5-44Engine oil pressure ..................... 5-41Front seat belt pretensionersystem ........................................ 5-42Low fuel ..................................... 5-42Low washer fluid level ............... 5-44Seat belt ...................................... 5-42Tire pressure monitoringsystem ........................................ 5-44
Warranty ............................................ 9-12Washer Fluid ..................................... 8-28
11-6
Index
Mazda3_8V66-EA-06F_Edition3 Page400Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (401,1)
W
Weights ............................................. 10-6Wheel Replacement .......................... 8-39Windows
Power windows .......................... 3-19Windshield Washer ........................... 5-58Windshield Wipers ............................ 5-56
Blades replacement .................... 8-29Winter Driving .................................... 4-9
Index
11-7
Mazda3_8V66-EA-06F_Edition3 Page401Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F
Black plate (402,1)
11-8
Mazda3_8V66-EA-06F_Edition3 Page402Wednesday, August 23 2006 11:22 AM
Form No.8V66-EA-06F