+12V Constant =

+12v Acc. Switched =

-12V Chassis Ground =

+12V Illumination =

+12V Dimmer =

Amp Remote =

LF+ =

LF- =

RF+ =

RF- =

LR+ =

LR- =

RR+=

Dash Type : DOUBLE DINKit: MA1532BHarness: MA03BAntenna Adapter:

Interface Adapter(s): N/A

About the Vehicle

Make: MAZDAModel: Miata MX-5Year: 2006-09

In Dash Application

Wire Color Codes

Speaker Notes

Front Speaker Sizes

Rear

Mazda Miata MX-5

RR- =

Notes

Speaker Sizes

Dimensions:

Dimensions: W= L= D=

NOTES

Rear Panel: 3 1/2" Speaker

OPTIONS

BOSE SOUND SYSTEM

AMPLIFIER LOCATIONS:

W= L= D=

Center Speaker: 3 1/2'' Upper Door: 3 1/2”Lower Door: 8” Mid BassSpeaker Adapter: TBA

The center speaker and the rear panelspeaker only comes with the BOSEsound system.

2006-09

Mazda Miata MX-5Images

Front Speaker

Rear

Center

1. Extract (1) PHS from inside door release cup. 2. Using a PRT unsnap the screw cover located at the top of the door handle. Extract the PHS from behind.3. Extract (1) PHS located in the cup holder at the lower portion of the door panel.4. Using a PRT unsnap the parameter of the door panel, lift away, disconnect and remove.5. 3 1/2 " speaker mounted to the door panel held on by (2) PHS.6. 8 " mid bass riveted to door shell.

Not Available.

Radio removal

Front Speaker

Rear Speaker

1. Remove Plastic knee guard panel.2. Extract Bolts securing knee guard panel.3. Extract (1) hidden PHS securing side of radio.4. Unsnap lower side trim panel on each side of the radio, by pulling back on them and unsnap them.5. Extract (1) PHS securing factory radio on each side.6. Using a PRT unsnap the parameter of the radio. Lift away disconnect and remove.

Center Removal

Not Available.

2006-09