2005 Threading Full Catalog

Threading Technology Clamping Technology

Welcome to EMUGE 2005. Let our new catalog be your guide on a trip to the very leading edge of thread cutting technology and into the twenty-first century! At EMUGE we are dedicated to exhaustive research and development, product manufacturing excellence, and unsurpassed customer service. We have introduced more new and innovative products recently than ever before in our history. These, in combination with our standard lines, comprise the most comprehensive and technologically advanced thread and cutting tool product line in the world. EMUGE Tools are designed and engineered for use today and in future. Whether your application requirements are general purpose or high tech, we can find the right thread cutting solution for you. We can recommend the appropriate tool, monitor initial product tests, provide installation assistance, and offer product support services through-out our relationship with you. That promises to be a very long time because our customer relationship tend to be a long term. Were proud of that. We have a slogan www.emuge.com [email protected] (508) 393-1300 Phone (508) 393-1310 Facsimile (800) 323-3013 Toll Free EMUGE Corp. 104 Otis Street Northborough, MA 01532-2456

C ATA L O G 2 0 0 5

Thread Cutting Technology Tap Holding Technology Clamping Technology Milling Technology

EMUGE Finds Success In Yours.Lets work together for that success.

Changes of any kind, or printing errors regarding technical details, do not justify any claims. All pictures are without obligation. Reprinting of text or pictures, or extracts thereof, is not allowed without our prior permission.

I

Catalog 2005 Contents

Page

J J J J

Tap Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII - XIV Standard Cutting Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XV Conversion of American Units into SI Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XVI Inch Taps UN-Coarse Threads ANSI Length / ANSI Shank . . . . . . . . . . . . . . . . . . 2 - 5 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . . 6 - 18 ANSI Length / ANSI Shank . . . . . . . . . . . . . . . . 20 - 23 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . 24 - 36 DIN Length / DIN Shank . . . . . . . . . . . . . . . . . 38 - 39 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . 40 - 42 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . 44 - 45 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . 46 - 47 DIN Length / ANSI Shank . . . . . . . . . . . . . . . . . . . . 48

UN-Fine Threads

UN-Extra Fine Threads UN-8 Threads STI-UN-Coarse Threads STI-UN-Fine Threads Self-Lock-UN-Coarse Threads

J Metric Taps Metric Coarse Threads ANSI Length / ANSI Shank . . . . . . . . . . . . . . . . 50 - 53 DIN Length / DIN Shank . . . . . . . . . . . . . . . . . 54 - 82 ANSI Length / ANSI Shank . . . . . . . . . . . . . . . . 84 - 87 DIN Length / DIN Shank . . . . . . . . . . . . . . . . 88 - 105 DIN Length / DIN Shank . . . . . . . . . . . . . . . 108 - 109 DIN Length / DIN Shank . . . . . . . . . . . . . . . . . . . . 110

Metric Fine Threads

STI-Metric Coarse Threads Self-Lock Metric Coarse Threads

J Straight Pipe Taps NPS and NPSM Threads NPSF Threads BSPP Threads Whitworth Pipe Threads DIN Length / DIN Shank . . . . . . . . . . . . . . . . . . . . 114 DIN Length / DIN Shank . . . . . . . . . . . . . . . . . . . . 115 DIN Length / DIN Shank . . . . . . . . . . . . . . . 116 - 117 DIN Length / DIN Shank . . . . . . . . . . . . . . . 118 - 124

J Taper Pipe Taps NPT Threads ANSI Length / ANSI Shank . . . . . . . . . . . . . . . . . . . 126 Extra Length/ ANSI Shank . . . . . . . . . . . . . . . . . . . 128 ANSI Length / ANSI Shank . . . . . . . . . . . . . . 130 - 131 Extra Length/ ANSI Shank . . . . . . . . . . . . . . . . . . . 132 DIN Length / DIN Shank . . . . . . . . . . . . . . . . . . . . 134 for Tapered Pipe Threads NPT, NPTF, BSPT . . . . . . . 136

NPTF Threads

BSPT Threads Hand Taper Reamers 1:16 II


Page

J Tap Accessories Tapping Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Special Shank Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 - 141 Replacement Clamping Nuts for Special Shank Extensions . . . . . . . . . . . . . . . . . . . . 142

J Technical Information General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 - 145 Tolerance Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 - 147 Application Range Description of EMUGE Taps . . . . . . . . . . . . . . . . . . . . . . . . . 148 - 160 Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Standard Values for Core Hole Diameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 - 168 Cutting Speeds for Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Decimal Equivalents for Drill Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Troubleshooting Guide for Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

J Quick-Change Tap Holders Type KSN (for CNC and other machine tools) Morse Taper Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK Shank DIN 2080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK Shank ANSI B5.18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDI Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weldon Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK Shank DIN 69871 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK Shank ANSI B5.50 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAT Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BT Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABS Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190

J Quick-Change Tap Holders Type KSN/IKZZ/MMS Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weldon Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 193 194 195 196

J Quick-Change Tap Holders Type KSN/IKZ/MMS HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 Quick-change Adapters Type EM/IKZ/MMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

III


Page

J Quick-Change Tap Holders Type KSN/HD 700 psi Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDI Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weldon Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK Shank DIN 69871 AD or B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABS Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 203 204 205 206 207 208 209 210

J Quick-Change Tap Holders Type KSN/Synchro SK Shank DIN 69871 AD or B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weldon Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 213 214 215

J Quick-Change Tap Holders Type KSN/Softsynchro Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weldon Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank DIN 69893 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minimum Quantity Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 219 220 221

J Quick-Change Tap Holders Type SFM (for multi-spindle set ups) Morse Taper Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

J Quick-Change Tap Holders Type SFM-NP Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

J Quick-Change Tap Holders Type SFM-L Morse Taper Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236

J Quick-Change Tap Holders Type SFM-L-DZ Morse Taper Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Trapezoidal Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 ACME Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

J Tapping Attachments (self-reversing high speed tap holders) Type GRN-NC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Type SWITCH-MASTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 - 254

IV


Page

J Tapping Attachments (for large diameter tapping) Type HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HF Accessory Shanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick-Change Adapters Type HE2 for Tapping Attachments Type HF20 . . . . . . . . . . . Quick-Change Adapters Type HE3 for Tapping Attachments Type HF30 . . . . . . . . . . . 257 258 259 260

J powRgrip Type PGR Quick-Change Tap Holders Type KSN/Softsynchro/PGR HSK Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylindrical Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick-Change Adapters Type EM/PGR/IKZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collets Type PGR-GB Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collets Type PGR-GB Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick-Change Tap Holders Type KSN/Synchro/PGR SK Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BT Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collets Type PGR Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine Type PGU 6100 E / PGU 6100 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adapters Type PGR-APG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine Type PGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pre-adjustment Tools Type PGR-VEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Taper Cleaners Type PGR-TKC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 265 266 267 268 269 270 271 272 273 273 273 274 274

J Quick-Change Adapters Type EM Shank Diameters and Square Sizes of Taps DIN/ANSI . . . . . . . . . . . . . . . . . . . . . . . . 277 Type EM/DIN Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Type EM/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279 Type EM/IKZ/DIN Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Type EM/IKZ/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Type EM-U/DIN Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Type EM-U/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Type EM-U/IKZ/DIN Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284 Type EM-U/IKZ/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Type EM-Z/ER/IKZ Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 Type EM-R Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 Torque Adjusting Tools Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 - 290 Torque Reference Values for Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291

J Tap Holder Accessories Adapter Shanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coolant Tubes and Wrenches for Shanks acc. DIN 69893 A . . . . . . . . . . . . . . . . . . . . Type ER-(GB) Collets Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type ER-(GB) Collets Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extensions Type VL-ER Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type ET-1-PCM Collets Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type ET-1-PCM Collets Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HiQ/ERC Sealing High Power Nuts Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . Clamping Nuts and Sealing Disks Metric/Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembly Instruction for Collets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 295 296 297 298 299 300 301 302 303

V


Page

J Solid Carbide Thread Mills Type GF UN Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 - 311 Metric Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 - 314 Whitworth Pipe Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 - 316 NPT Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 - 318 NPTF Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 - 320 NPSF and NPSI Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 BSPT Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322

J Solid Carbide Thread Mills with Chamfer Type GSF UN-Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UN-Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Whitworth Pipe Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 - 327 328 - 330 331 - 333 334 - 335 336 - 337

J Solid Carbide Thrillers Type BGF UN-Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UN-Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Coarse Threads for Wire Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . 340 - 342 343 - 344 345 - 350 351 - 352 353 - 354

J Solid Carbide Circular Thrillers Type ZBGF UN-Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 - 357 UN-Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 - 359 Metric Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 - 362

J Circular Thread Mills Type WSP Thread Mills with Standard Inserts 15 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exchangeable Carbide Thread Inserts 15 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Mills with Long Inserts 26 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exchangeable Carbide Thread Inserts 26 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 365 366 367

J Circular Thread Milling Bodies for Large Thread Sizes Type Gigant-ic (Threads-All) Cylindrical Shank DIN 1835 B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 SK Shank DIN 69871 AD or B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Carbide 4-tooth Indexable Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 - 371 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372

J Chucks for Thread Mills SK Shank DIN 69871 AD or B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 BT Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375

J Counterbore and Stepped Bore Systems for Free Combination Type MoSys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 - 378

VI


Page

J Technical Information Thread Milling Programming Examples for Practical Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 Tool Description and Programming Instruction Thread Mills Type GF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 - 381 Thread Mills Type GF Tapered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 - 383 Thread Mills with Chamfer Type GSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 - 385 Thrillers Type BGF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 - 387 Circular Thrillers Type ZBGF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 - 389 Circular Thread Mills Type WSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 - 391 Circular Thread Mills Type EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392 - 393 Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Standard Values for the Cutting Speed and Feed . . . . . . . . . . . . . . . . . . . . . . . 395 - 396

Fold-out PageThis fold-out page is intended to be a guide to the diverse application ranges, organized according to material groups. The materials have been marked with numbers 1-9. Please check the tap column for the corresponding number to find the most suitable tool.

J General Information Workpiece Clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 - 400 FRANKEN Milling Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 Special Tap Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Test-A-Tap Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Clamping System Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 Test-A-Holder Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Test-A-Thread Mill Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 Test-A-Tool Mill Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407 Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408

VII

Standard Taps 1-2-3 Tap Finder

Please note: The taps shown in this Tap Finder are only Basic Tap Types. Further executions see pages following the basic tap types. How To Use: 1. Select Material Group and approximate Hardness Range. 2. Scan horizontally to the right until you locate a Dot or Diamond ( / ) for the specific hole type. 3. Now scan vertically to locate the Tap Type required and the page on which further information about that tap can be found. 4. For the selection of the correct Cutting Speed, please see also page XV! = Standard Taps and Tapered Taps (Pages VIII - XII) = Taps for High-Speed Thread Cutting (Page XIII) = Taps for Lubricant-Free Thread Cutting (Page XIV) = Preferred Suitable TapMaterial GroupHRC 1 1.1 1.2 1.3 1.4 1.5 Steel materials Cold-extrusion steels Magnetic soft iron Free cutting steels, General construction steels Free cutting steels, Construction steels, Alloyed steels, Steel castings Chrome Alloy Steel, Heat-treatable steels, Nitriding steels, Cold work steels Heat-treatable steels, Nitriding steels, Hot work steels, Hardened steels up to 44 HRC Hardened steels Hardened steels Hardened steels Hardened steels Corrosion-proof steels, Acid-proof steels, Heat-resistant steels Corr.-/Acid-proof steels, Heat-resist. steels Corr.-/Acid-proof steels, Heat-resist. steels Special steel materials Cast materials Cast iron Cast iron with nodular graphite Cast iron with vermicular graphite Malleable cast iron Hard castings up to 400 BHN Copper, Copper alloys, Bronze, Brass Pure copper and low alloyed copper Copper-zinc alloys (brass, long-chipping) Copper-zinc alloys (brass, short-chipping) Copper-alum. alloys (alubronze, long-ch.) Copper-tin alloys (bronze, long-chipping) Copper-tin alloys (bronze, short-chipping) Special copper alloys, up to Q18 Special copper alloys, over Q18 Nickel/Cobalt alloys Nickel/Cobalt alloys heat-resistant Nickel/Cobalt alloys high-heat resistant Nickel/Cobalt alloys high-heat resistant Aluminium alloys Aluminium wrought alloys Aluminium cast alloys 5% Si Aluminium cast alloys > 5% Si - 12% Si Aluminium cast alloys > 12% Si Magnesium alloys Magnesium wrought alloys Magnesium cast alloys Titanium, Titanium alloys Pure titanium, Titanium alloys Titanium alloys Synthetics Duroplastics (short-chipping) Thermoplastics (long-chipping) Fibre-reinforced synthetics Materials for special applications Graphite Tungsten-copper alloys Chamfer Tap Type C/2-3 C/2-3 C/2-3 C/2-3 C/2-3 C/2-3 C/2-3 B/4-5 B/4-5 B/appr. 3 B/4-5 B/4-5 B/4-5

Rekord A

Rekord A-MS

Rekord A-GAL

Rekord A-H2, 6 20, 24

Rekord A-H TIN

Rekord A-H TICN2 20

Rekord A-Z TICN6 24

Rekord B7 25 39

Rekord B NE2

Rekord B-AL

MULTI Rekord B NT2

Rekord B-VA2, 7 20, 25 40 44, 45 46, 47

Rekord B CRN8 26

= Cold-Forming Taps (Pages XII - XIII) = Synchro Taps (Page XIII) = Carbide Taps (Page XIV) = Preferred Multi Spindle ApplicationsMaterial-ExampleN/mm2 1008 / 1010 1008 / 1010 / 12L14 / A36 11L17, 1140, 12L15 1018, 1060, 4130, 4140, 41L30, 41L45, 86L20, 86L40, 1045 5115, A29, A519, J404 4130, 8030, 4140, 4330 Nitralloy125, 135, 230, EZ, A7 D2, D3, D4, D5, D7 4130, 8030, 4140, 4330 H10, H11, H14, H21, H22, H46 4130, 4340, 150, 4161, 5160, 8660 4130, 4340, 150, 4161, H13, H10 52100, M-50, 4340, D5ac, H11 M1-M47, 52100 M1-M47 303, 304, 316, 316L, 416, 420 303, 304, 316, 316L, 416, 420 303, 304, 316, 316L, 416 ,420 410, 420, Cf8m,17-4ph 347, 420, 440, 15-5PH, 17-4PH Ferro-TiC, Hardox 500 ASTM A48, SAE J431c grade, 1800 ASTM A48 class 20, 30, 35, 40 SAE J431c grade G3000 ASTM A47 grades 32510, 35018 99% pure 320, 360

= Suitable TapBHN

UNC UNF UNEF UN-8 STI-UNC STI-UNF LK-UNC M MF STI-M LK-M NPS/NPSM NPSF BSPP (Rp) G NPT NPTF BSPT (Rc)

38 40

54, 58 88, 91

54, 59

59

50, 58, 80 84, 92

50 84

58

60 92

48 55, 62, 80 88, 94

63

63 108

62 94

50, 55, 63, 80 84, 94 108 110

50, 64

114 115 116, 117 118, 120

118

120

118, 121

121

Hardness-Range

Speed SFMUncoated/ Surface-Treated 15 - 80 15 - 80 15 - 65 5 - 35 Hard Surface Coating 50 - 150 50 - 150 50 - 150 15 - 80

Through and Blind Holes

Through Holes

120 180 25 35 250 320

400 600 850 1100

44 > 44 - 55 > 55 - 60 > 60 - 63 > 63 - 66 25 35 44

410

1400

5 - 15 5 - 35 5 - 25 5 - 15 5 - 15 35 - 65 15 - 65 15 - 50 35 - 65 15 - 65 35 - 130 35 - 130 5 - 35 15 - 65 5 - 15 5 - 35 5 - 15 35 - 65 35 - 65 35 - 65

5 - 35 15 - 65 15 - 50 15 - 35 15 - 15 35 - 100 35 - 80 35 - 80 35 - 100 15 - 100 65 - 195 15 - 80 60 - 100 5 - 35 5 - 15 15 - 65 5 - 15 50 - 130 50 - 130 50 - 130 35 - 100 65 - 330 65 - 330 15 - 50 15 - 35 50 - 150

1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 2 2.1 2.2 2.3 2.4 2.5 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 6 6.1 6.2 7 7.1 7.2 8 8.1 8.2 8.3 9 9.1 9.2

250 320 410 < 280

850 1100 1400

1000 < 280 < 400 150 500 700

> 38 HRC use only carbide taps

25 25 - 44 > 44

250 250 - 410 > 410

850 850 - 1400 > 1400

Hastelloy B, C, C-276 Inconell 718, Rene 100 Inconell 718, Haynes 25 2014, 2117, 5050, 6061, 7004 201, 213, 295, 435.2, 511.0 319, 333, 356, 343, 369, 380 390, 393, 413

27 27 - 39

270 270 - 370

900 900 - 1250

Commercially pure C-1, C-2 6Al4V Bakelite PVC Phenolic

5 - 25 5 - 15 15 - 80 35 - 65

VIII

B/4-5

B/4-5

B/4-5

B/appr. 3

D/4-5

D/4-5

D/4-5

D/4-5

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

Rekord B TIN3, 8, 9 21, 26

Rekord B-VA TICN8 26 40

Rekord B-Z TIN9 27

Rekord B-AERO9 27

Rekord C

Rekord C-TI3, 10 21, 28

Rekord C-TI TICN10 28

Rekord C-NI TICN10 28

Rekord D

Rekord DF

Rekord D-GAL

Rekord D-GAL TIN

Rekord D-VA11 29 39

Rekord D-VA CRN11 29

Rekord D TIN11 29

50, 64 84, 95

64 95

64

65 95

65

65

66

55, 66 89, 96

69

51, 68 85

51 85

51, 55, 66, 80 85, 89, 96

51, 67

51, 67 85, 96

121

121

118, 121

Through Holes

Blind Holes

IX

Standard Taps

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

Rekord DF-VA

Rekord DF TIN

Rekord D-VA TICN11 29

Rekord D-Z TIN12 30

Rekord D-TI3, 11 21, 29 40 44, 45 46, 47

Rekord D-TI TICN11 29

Rekord DF-NI TICN12 30

Enorm

Enorm X

Enorm X NE

Enorm AL

Enorm W

Enorm W NE2

13 31 39

69

69

67

68 97

67

67

69

56, 70, 80 98

71

71

71 109

72

122

Speed SFMUncoated/ Surface-Treated 15 - 80 15 - 80 15 - 65 5 - 35 Hard Surface Coating 50 - 150 50 - 150 50 - 150 15 - 80

Blind Holes

5 - 15 5 - 35 5 - 25 5 - 15 5 - 15 35 - 65 15 - 65 15 - 50 35 - 65 15 - 65 35 - 130 35 - 130 5 - 35 15 - 65 5 - 15 5 - 35 5 - 15 35 - 65 35 - 65 35 - 65 5 - 25 5 - 15 15 - 80 35 - 65

5 - 35 15 - 65 15 - 50 15 - 35 15 - 15 35 - 100 35 - 80 35 - 80 35 - 100 15 - 100 65 - 195 15 - 80 60 - 100 5 - 35 5 - 15 15 - 65 5 - 15 50 - 130 50 - 130 50 - 130 35 - 100 65 - 330 65 - 330 15 - 50 15 - 35 50 - 150

X

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

Enorm W-AL

MULTIEnorm NE2

Enorm VA

Enorm VA NE24, 13 22, 31 41

Enorm X-VA

Enorm TIN

Enorm Z4, 14 22, 32 41 44, 45 46, 47 48 56, 72 99 109 110 114 115 117 122

Enorm Z CRN14 32

Enorm Z TIN5, 14 23, 32 41

Enorm Z TICN14 32 41

Enorm Z GLT-115 33

Enorm Z50

Robust X-VA18 36 42

Robust X-VA TIN

71 99

70 98

52, 71, 81 86, 98

71 98

71

52, 72 86, 99

52, 73

52, 72 99

73

73

74 100

82 104

82 104

114 115 122 124 124

122

122

Blind Holes


XI

Tapered Taps

Cold-Forming Taps

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

Rekord KEG-A

Rekord KEG-A TIN

Rekord KEG-A-VA AZ

Rekord KEG-A-VA AZ-TIN

Rekord KEG-D-VA

Rekord KEG-D-VA TIN

Rekord KEG-D-VA TICN

GFU Druck-S16 34

GFU Druck-S CR

GFU Druck-S CRN5, 16 23, 34

GFU Druck-S TIN5, 16 23, 34

53, 76 87, 102 110

76

53

53, 76 87, 102

123 126, 128 130, 132 134 126, 128 130, 132 130, 132 130, 132 126, 128 130 126, 128 131 126 131

Speed SFMUncoated/ Surface-Treated 5 - 25 5 - 20 3 - 15 Hard Surface Coating 5 - 35 5 - 35 5 - 25 5 - 25


Blind Holes

Speed SFMUncoated/ Surface-Treated 15 - 80 Hard Surface Coating 35 - 165 35 - 165 35 - 100 15 - 65

Through and

3 - 15 3 - 15 3 - 15 3 - 15 5 - 35 5 - 25 5 - 35 5 - 35 3 - 15 5 - 25 5 - 35 3 - 15 3 - 15 5 - 35

5 - 25 5 - 25 5 - 25 5 - 25 15 - 50 5 - 35 15 - 50 15 - 50 5 - 25 5 - 35 5 - 25 5 - 25 5 - 35 5 - 35 5 - 35 5 - 50

15 - 80 15 - 80 15 - 80

5 - 35 15 - 65 15 - 50 5 - 35 35 - 165 35 - 165 15 - 65 15 - 65 5 - 35 35 - 165 35 - 165 35 - 165 15 - 50 5 - 35

XII

Full-Speed Taps

Synchro Taps

C/2-3

C/2-3

C/2-3

C/2-3

B/4-5

C/2-3

E/1.5-2

C/2-3

C/2-3

B/4-5

C/2-3

GFU Druck-S TICN17 35

GFU Druck-PM TIN

GFU Druck-Z TIN-T117 35

Rekord A-S TICN7 25

Rekord B-SPEED TIN9 27

Rekord D-S TIN12 30

Rekord AERO-S/E TIN

Enorm S CRN15 33

Enorm S TIN15 33

Rekord Enorm B-SYNCHRO SYNCHRO IKZN-TIN-T1 IKZ-TIN-T19 27 15 33

53, 76 87

77 103

78 103

61 93

65 95

68 97

69 97

75

75 100

65

75

Blind Holes

Speed SFM130 - 330 130 - 260 100 - 195 65 - 130

Thr+Bl. Through Holes Holes

Blind Holes

Speed SFM50 - 150 50 - 150 50 - 150 15 - 80

Through Blind Holes Holes

35 - 80 35 - 65 65 - 195 65 - 130 65 - 130 65 - 130 65 - 130 130 - 330 130 - 330 100 - 195 65 - 260 65 - 195 65 - 195 65 - 130 65 - 330 65 - 330

5 - 35 15 - 65 15 - 50 15 - 35 35 - 80 35 - 80 35 - 100 15 - 100 65 - 195 15 - 80 50 - 130 50 - 130 35 - 100

XIII

ko Taps

Carbide Taps

Carbide ColdForming Taps

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3

C/2-3 (D/4-5)

C/2-3

C/2-3

C/2-3

C/2-3

Rekord A-KO TICN7 25

Rekord A-KO TIALN-T47 25

Rekord B-KO TIN10 28

Rekord D-KO TIN13 31

Enorm KO TIN

Enorm KO TICN

Enorm KO50 TIN

VHM-Rekord HM-Rekord HM-Rekord HM-Rekord A-HCUT A-H-IKZ A-FK D-VA-IKZ TICN

HM-GFU Druck-S OLN-IKZ

61 93

61 93

65

69 97

75 100

75 100

75 101

57 90

59 92

59

66 96

78 102

119

120

Speed SFM15 - 80 15 - 80 15 - 80 5 - 35


Through Holes

Blind Holes

Speed SFM


Blind Holes

Speed SFM 50 - 130

Thr+Bl. Holes

5 - 35 5 - 25 15 - 65 15 - 65 15 - 65 15 - 65 35 - 130 35 - 130 15 - 65

15 - 35 5 - 15 5 - 10 5- 7 65 - 260 65 - 195 65 - 195 65 - 195 15 - 35 130 - 330 65 - 330 5 - 35 5 - 35 50 - 130 50 - 130 50 - 130 130 - 330 15 - 100 65 - 260 5 - 15

35 - 80 35 - 80 5 - 35 65 - 195 65 - 195

XIV

Standard Cutting Speeds

For Thread Cutting and Cold-Forming of Threads in Relation to the Workpiece MaterialPlease note: The speed values in bold print are maximum values. The choice of a specific cutting speed within a recommended speed range depends mostly on the following conditions: material, thread system, quality and depth of the drilled hole, surface treatment or coating, coolant-lubricant, type of machine tool used. The smaller the percentage of alloying components, and the smaller the tensile strength of the material, the higher are the possible cutting speeds. This priciple can also be used vice-versa. If you use poor emulsions without EP additives, or the lubrication quality of your coolant-lubricant is poor, start from the lower speeds in the indicated speed range. In the cold-forming of threads, it is essential to provide good lubrication because of high friction forces. As the lubrication quality of a coolant-lubricant is often unknown we recommend starting from the lower cutting speed in such cases.

Small thread diameter

Low percentage of alloying components

Low tensile strength (of material)

Increasing Cutting Speed

High percentage of alloying components

High tensile strength (of material)

Large thread diameter

Unstable workpiece clamping

Bad lubrication

Thread depth 1.5xD

Coarse pitch

Stable workpiece clamping

Good lubrication

Thread depth 1.5xD

Fine pitch

Decreasing Cutting Speed

Lower Cutting Speed Limitstronger influence

Free cut Inaccurate pitch control Hydraulic/air drive less strong XV

Synchronous spindle Lead screw CNC control

Upper Cutting Speed Limit

Conversion of American Units into SI Units

American units into SI units Length1 inch (in) 1 foot (ft) 1 yard (yd) 1 statute mile = 25.4 mm = 12 in = 3 ft = 1760 yd = 2.54 cm = 0.3048 m = 0.9144 m = 1.60934 km 1 millimeter (mm) 1 centimeter (cm) 1 meter (m) 1 kilometer (km)

SI units into American units

= 0.03937 in = 10 mm = 0.3937 in

= 100 cm = 3.2808 ft = 1.0936 yd = 1000 m = 0.62137 statute mile

Area1 in2 1 ft2 1 yd2 = 645.16 mm2 = 144 in2 =9 ft2 = 6.4516 cm2 = 0.0929 m2 = 0.8361 m2 1 mm2 1 cm2 1 m2 = 100 mm2 = 10000 cm2 = 0.00155 in2 = 0.155 in2 = 10.7642 ft2 = 1.196 yd2 = 0.3861 mile2

1 mile2

= 2.590 km2

1 km2

= 106 m2

Volume1 in3 = 16387.064 = 1728 in3 = 27 ft3 =1/4

mm3

= 16.387

cm3

1 mm3 1 cm3 1 m3 1 Liter (l) 1l = 1000 mm3

= 0.000061 in3 = 0.0610 in3

1 ft3 1 yd3 1 Quart / US 1 gallon (gal) / US 1 gallon (gal) / UK 1 US pint (pt) 1 UK pt 1 barrel / US (Oil) 1 barrel / UK

= 0.0283 m3 = 0.765 m3 = 0.946 l = 3.784 l = 4.546 l

= 106 cm3 = 35.3146 ft3 = 1.3080 yd3 = 1 dm3 = 0.2642 gal / US = 2.11 US pt = 1.761 UK pt

gal

= 4 quarts

= 0.8327 UK pt = 1.201 US pt = 42 gal = 36 gal

= 0.473 l = 0.568 l = 158.98 l = 163.66 l

Weight1 ounce (oz) 1 pound (lb) 1 short ton / US 1 long ton / UK = 16 drams = 16 oz = 28.35 g = 453.592 g = 0.907 t = 1.016 t 1 gram (g) 1 kilogram (kg) 1 ton (t) 1 ton (t) = 1000 g = 1000 kg = 1000 kg = 0.03527 oz = 2.20462 lb = 1.1025 short tons / US = 0.984 long tons / UK

Force1 pound force (lbf) = 4.448 N 1 Newton (N) = 0.2248 lbf

Pressure/Tensile strength1 lbf/ft2 1 lbf/in2 1 psi (pound-force per sq.in) 1 psi = 6.89476 kPa = lbwt/in2 = 47.8803 Pa = 6.895 10-3 N/mm2 = 6.895 10-3 N/mm2 1 Pascal (Pa) 1 N/mm2 1 bar = 106 N/mm2 = 0.1 bar = 10 N/mm2 = 0.02089 lbf/ft2 = 145 psi = 14.5 psi

= 6.895 10-2 bar

Power1 foot-pounds per second (ft lb/s) = 1.356 W 1 Watt (W) = 1 J/s = 1 Nm/s = 0.7376 ft lb/s

Energy/Torque1 foot pound-force (ftlbf) = 1.356 J 1 Joule (J) = 1 Nm = 0.7376 ft lb

Cutting speed1 feet per minute (sfm) = 0.3048 m/min 1 m/min = 3.2808 sfm

Temperaturein degree Fahrenheit (F) = 9/5 Temp.[C]+32 in degree Celsius (C) = (Temp.[F]-32) 5/9

XVI

Machine Taps Roll Form Taps

UNC

UN-Coarse Threads

1

UNC

UNC

Machine Taps UN-Coarse Threads ANSI Length ANSI Shank

HSS Extra

Reinforced Shank (No.4 - 3/8)l1 l3 l2 d1 d2 l1 l2 d2

Reduced Shank (7/16 - 3/4)

d1

Hole Shapes60 P

UNCNominal T.P.I. Size l1 d1 40 1 7/8 No. 4 40 1 15/16 No. 5 32 2 No. 6 32 2 1/8 No. 8 24 2 3/8 No. 10 1/4 20 2 1/2 5/16 18 2 23/32 3/8 16 2 15/16 7/16 14 3 5/32 1/2 13 3 3/8 9/16 12 3 19/32 5/8 11 3 13/16 3/4 10 4 1/4 l2 1.88 1.94 2.00 2.13 2.38 2.50 2.72 2.94 3.16 3.38 3.59 3.81 4.25 inch l3 0.709 0.709 0.748 0.827 0.945 1.142 1.299 1.378 d2 0.141 0.141 0.141 0.168 0.194 0.255 0.318 0.381 0.323 0.367 0.429 0.480 0.590

Special Characteristics Surface Treatment Class of fit Chamfer (lA) Catalog No. EDP Tool Identification EDP Dimen. D ID 0.110 0.0890 5003 0.110 0.1015 5004 0.110 0.1110 5005 0.131 0.1360 5006 0.152 0.1520 5007 0.191 0.2040 5009 0.238 0.2610 5010 0.286 0.3160 5011 0.242 0.3680 5012 0.275 0.4219 5013 0.322 0.4844 5014 0.360 0.5313 5015 0.442 0.6563 50161

2B C/2-3 AU 433 AU 100501 Rekord A-H

2B C/2-3 AU 755 AU 109101 Rekord A-H TICN

2B B/4-5 AU 462 AU 203000 Rekord B-VA


Oversize B/4-5 AU 466 AU 203044 Rekord B-VA

Flutes

Flutes

Flutes

Flutes

0.433 0.433 0.472 0.512 0.591 0.669 0.787 0.866 0.866 0.984 1.024 1.063 1.181

3 3 3 3 3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 3 3 3 3 4

2 3 3 3 3 3 3 3 3 3 3 3 3

1) (+.0035)

3 3 3 3 3 3

(+.0050) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050)

1)

EDP Tool Identification = AU 203043

2

Ordering example: AU100501.5003, No.4-40 UNC-2B, Rekord A-H

Flutes 3 3 3 3 3 3 3

Machine Taps UN-Coarse Threads

HSS Extra ANSI Length ANSI Shank

Chamfer

Description

lA

Form C = 2-3 Thr.

lA

Form B and D = 4-5 Thr.

Symbols

Description

2B B/4-5 AU 460 AU 201400 Rekord B TIN

2B D/4-5 AU 480 AU 306001 Rekord C-TI


2B C/2-3 AU 512 AU 456001 Rekord D-TI


With Special Cutting Geometry NT/NT2 Nitrided TiN Coating TiCN Coating

2 3 3 3 3 3 3 3 3 3 3 3 3

2 2 3 3 3 3 3 3 3 3 3 3 3

3 3 3 3 3 3

2 2 3 3 3 3 3 3 3 3 3 3 3

3 3 3 3 3 3

EDP Dimen. ID 5003 5004 5005 5006 5007 5009 5010 5011 5012 5013 5014 5015 5016

Nominal Size d1 No. 4 No. 5 No. 6 No. 8 No. 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

Flutes

Flutes

Flutes

Flutes

Flutes

T.P.I.

40 40 32 32 24 20 18 16 14 13 12 11 10

In stock

3

UNC

UNC

Machine Taps UN-Coarse Threads ANSI Length ANSI Shank

HSS Extra

Reinforced Shank (No.4 - 3/8)l1 l3 l2 d1 d2

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

l1 l2

d1

d2

Hole Shapes60 P

UNCNominal T.P.I. Size l1 d1 40 1 7/8 No. 4 40 1 15/16 No. 5 32 2 No. 6 32 2 1/8 No. 8 24 2 3/8 No. 10 1/4 20 2 1/2 5/16 18 2 23/32 3/8 16 2 15/16 7/16 14 3 5/32 1/2 13 3 3/8 9/16 12 3 19/32 5/8 11 3 13/16 3/4 10 4 1/4 l2 1.88 1.94 2.00 2.13 2.38 2.50 2.72 2.94 3.16 3.38 3.59 3.81 4.25 inch l3 0.709 0.709 0.748 0.827 0.945 1.142 1.299 1.378 d2 0.141 0.141 0.141 0.168 0.194 0.255 0.318 0.381 0.323 0.367 0.429 0.480 0.590


2B C/2-3 AU 565 AU 503200 Enorm VA NE2


Oversize C/2-3 AU 569 AU 503244 Enorm VA NE2

2B E/1.5-2 AU 555 AU 513500 Enorm Z/E

l2 10 x P


3B E/1.5-2 AU 556 AU 513510 Enorm Z/E

Flutes

Flutes

Flutes

Flutes

0.433 0.433 0.472 0.512 0.591 0.669 0.787 0.866 0.866 0.984 1.024 1.063 1.181

2 3 3 3 3 3 3 3 3 3 3 3 3

1) (+.0035)

3 3 3 3 3

(+.0050) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050)

3 3 3 3 3 3 3

2 3 3 3 3 3 3 3 4 4 4 4 4

1)


4

Ordering example: AU503200.5003, No.4-40 UNC-2B, Enorm-VA-NE2

Flutes 3 3 3 4 4

Machine Taps/Roll Form Taps UN-Coarse Threads

HSS Extra ANSI Length ANSI Shank

Chamfer

Description

lA

Form E = 1.5-2 Thr.

lA l2 10 x P l2 10 x P

Form C = 2-3 Thr.

Roll Form Taps:

lA

Form C = 2-3 Thr.

Symbols

Description

2B E/1.5-2 AU 592 AU 513700 Enorm Z/E TIN


Special core hole diameters are required for the use of roll form taps.Flutes

2B C/2-3 AU 688 AU 921400 GFU Druck-S-OLN TIN

2B C/2-3 AU 691 AU 921700 GFU Druck-S-OLN CRN

With Special Cutting Geometry Ne2 Neutralized Cromium Nitrided (CrN) TiN Coating With Oil Grooves Very Short Chamfer

D1

2 3 3 3 3 3 3 3 4 4 4 4 4

3 3 3 4 4

0.1000 0.1130 0.1220 0.1490 0.1700 0.2250 0.2850 0.3440 0.4040 0.4600 0.5200 0.5780 0.7030

EDP Dimen. ID 5003 5004 5005 5006 5007 5009 5010 5011 5012 5013 5014 5015 5016

Nominal Size d1 No. 4 No. 5 No. 6 No. 8 No. 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

Flutes

T.P.I.

40 40 32 32 24 20 18 16 14 13 12 11 10

In stock

5

UNC

UNC

Machine Taps UN-Coarse Threads DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 376

HSS Extra

New

New


Reduced Shank (7/16 - 2)l1 l2 l2 10 x P l2 10 x P l2 10 x P

d1

d2

Hole Shapes60 P

UNCReinforced ShankNominal Size d1 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I. l1 64 56 48 40 40 32 32 24 24 20 18 16 1.772 1.772 1.969 2.205 2.205 2.205 2.480 2.756 3.150 3.150 3.543 3.937 l2 0.354 0.354 0.354 0.433 0.433 0.472 0.512 0.591 0.630 0.669 0.787 0.866 inch l3 0.551 0.709 0.709 0.787 0.827 0.984 1.142 1.181 1.378 1.535 d2 0.141 0.141 0.141 0.141 0.141 0.141 0.168 0.194 0.220 0.255 0.318 0.381

Special Characteristics Surface Treatment Class of fit Chamfer (lA) Catalog No. EDP Tool Identification EDP Dimen. D ID 0.110 0.0595 5000 0.110 0.0700 5001 0.110 0.0820 5002 0.110 0.0890 5003 0.110 0.1015 5004 0.110 0.1110 5005 0.131 0.1360 5006 0.152 0.1520 5007 0.165 0.1770 5008 0.191 0.2040 5009 0.238 0.2610 5010 0.286 0.3160 50111

2B C/2-3 BU 226 BU 100501 Rekord 1A-H

2BX C/2-3 BU 667 BU 109401 Rekord 1A-Z TICN

NewIKZ

IKZN

2BX C/2-3 BU 669 BU 959401 Rekord 1A-Z-IKZ TICN

2BX C/2-3 BU 672 BU 219401 Rekord 1A-Z-IKZN TICN

Flutes

Flutes

Flutes

2 3 3 3 3 3 3 3 3 3 3 3

3 3 3 3 3 3 3 3

3 3 3 3

Reduced ShankNominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 T.P.I. l1 14 13 12 11 10 9 8 7 7 6 6 5 4 1/2 3.937 4.331 4.331 4.331 4.921 5.512 6.299 7.087 7.087 7.874 7.874 8.661 9.843 l2 0.866 0.984 1.024 1.063 1.181 1.260 1.417 1.575 1.575 1.969 1.969 2.283 2.559 inch l3 d2 0.323 0.367 0.429 0.480 0.590 0.697 0.800 0.896 1.021 1.108 1.233 1.430 1.644

Catalog No. EDP Tool Identification EDP Dimen. D ID 0.242 0.3680 5012 0.275 0.4219 5013 0.322 0.4844 5014 0.360 0.5313 5015 0.442 0.6563 5016 0.523 0.7656 5017 0.600 0.8750 5018 0.672 0.9843 5019 0.766 1.1094 5020 0.831 1.2205 5021 0.925 1.3386 5022 1.072 1.5551 5023 1.233 1.7812 50241

Flutes

Flutes

Flutes

3 3 3 3 4 4 4

3 3 3 3 4

3 3 3 3 4

6

Ordering example: BU100501.5000, No.1-64 UNC-2B, Rekord 1A-H

Flutes 3 3 3 3 4

CU 137 CU 100501 Rekord 2A-H

CU 730 CU 109401 Rekord 2A-Z TICN

CU 732 CU 959401 Rekord 2A-Z-IKZ TICN

CU 735 CU 219401 Rekord 2A-Z-IKZN TICN

Flutes 3 3 3 3

Machine Taps UN-Coarse ThreadsResists heat stress without additional wear even at high speeds. Tap up to 260 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads For lubricant-free thread cutting in a broad range of materials

HSS Extra DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 376

New

New

New

New

Chamfer

Description

lA

Form C = 2-3 Thr.

lA

Form B = 4-5 Thr.

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

Symbols

Description

IKZ

IKZN

2BX C/2-3 BU 674 BU 339401 Rekord 1A-KO TICN

2BX C/2-3 BU 676 BU 33B401 Rekord 1A-KO TIALN-T4 2B B/4-5 BU 272 BU 201000 Rekord 1B

3B B/4-5 BU 274 BU 201010 Rekord 1B

IKZ IKZN

2BX C/2-3 BU 664 BW 159401 Rekord 1A-S-IKZ TICN

2BX C/2-3 BU 666 BW 179401 Rekord 1A-S-IKZN TICN

Flutes

Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3

3 3 3 3

3 3 3

3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

Flutes

2B B/4-5 BU 273 BU 203000 Rekord 1B-VA

With Special Cutting Geometry NT/NT2 Nitrided TiCN Coating TiAlN Coating Axial coolant thru for blind hole applications Axial coolant thru with radial flow into the flutes for thru and blind hole applications

Reinforced ShankEDP Dimen. ID 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 Nominal Size d1 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I.

2 2 2 2 3 3 3 3 3 3 3 3

64 56 48 40 40 32 32 24 24 20 18 16

CU 727 CW 159401 Rekord 2A-S-IKZ TICN

CU 729 CW 179401 Rekord 2A-S-IKZN TICN

CU 738 CU 339401 Rekord 2A-KO TICN

CU 740 CU 33B401 Rekord 2A-KO TIALN-T4

Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3 4 4 4

3 3 3 3 4 4 4

3 3 3 4

3 3 3 4

Flutes

3 3 3 3 3 3 3 3 4 4 4 4 4

3 3 3 3 3 3 3

Flutes

CU 192 CU 201000 Rekord 2B


CU 193 CU 203000 Rekord 2B-VA

Reduced ShankEDP Dimen. ID 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 Nominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 T.P.I.

3 3 3 3 3 3 3 3 4 4 4 4 4

14 13 12 11 10 9 8 7 7 6 6 5 4 1/2

In stock

7

UNC

UNC


HSS Extra


Reduced Shank (7/16 - 2)

d1

Hole Shapes60 P




IKZN

2B B/4-5 BU 319 BU 201700 Rekord 1B CRN


2B B/4-5 BU 290 BU 201400 Rekord 1B TIN

2B B/4-5 BU 704 BU 089300 Rekord 1B-VA-IKZN TICN

Flutes

Flutes

Flutes

2 2 2 2 3 3 3 3 3 3 3 3

3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

Flutes

3 3 3 3 3



Flutes

Flutes

Flutes

Flutes

3 3 3 3 3 3 3 3 4 4 4 4 4

3 3 3 3 3 3

3 3 3 3 3

3 3 3 3 3 3

8

Ordering example: BU203010.5000, No.1-64 UNC-3B, Rekord 1B-VA

Flutes 3 3 3 3 3 3


CU 752 CU 089300 Rekord 2B-VA-IKZN TICN

CU 245 CU 201700 Rekord 2B CRN


CU 217 CU 201400 Rekord 2B TIN

Flutes 3 3 3 3 3

Machine Taps UN-Coarse ThreadsResists heat stress without additional wear even at high speeds. Tap up to 325 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads

HSS ExtraSpecifically for use on CNC machines with synchronous control and the use of KSN/Softsynchro Tap Holders

DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 376

New

New

New

New

New

Chamfer

Description

lA

Form C = 2-3 Thr.

lA

Form B for Alu. = approx. 3 Thr.

lA l2 10 x P l2 10 x P l2 10 x P l2 10 x P l2 10 x P


Symbols IKZN

Description


3B B/approx. 3 BU 303 BU 206511 Rekord 1B-AERO

2BX B/4-5 BU 718 BU 203701 Rekord 1B-Z TIN

IKZN

2BX B/4-5 BU 724 BW 133701 Rekord 1B-SPEED TIN

IKZN

IKZN

2BX B/4-5 BU 720 BU 083701 Rekord 1B-Z-IKZN TIN

2BX B/4-5 BU 726 BW 203701 Rekord 1B-SPEED IKZN-TIN

2BX B/4-5 BU 722 BW 12F001 Rekord 1B-SYNCHRO IKZN-TIN-T1

With Special Cutting Geometry NT/NT2 Nitrided Cromium Nitrided (CrN) TiN Coating TiCN Coating Axial coolant thru with radial flow into the flutes for thru and blind hole applications

Reinforced ShankEDP Dimen. ID 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 Nominal Size d1 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 Flutes T.P.I.

Flutes

Flutes

Flutes

Flutes

Flutes

Flutes

2 3 3 3 3 3 3 3

3 3 3 3 3

2 3 3 3 3 3 4 4

3 3 4 4

2 3 3 3 3 3 4 4

3 3 4 4

3 3 4 4

64 56 48 40 40 32 32 24 24 20 18 16


Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3 3 3

3 3 3 3

4 4 4 4 4

4 4 4 4 4

Flutes

4 4 4 4

4 4 4 4

Flutes

CU 232 CU 206511 Rekord 2B-AERO

CU 772 CU 203701 Rekord 2B-Z TIN

CU 774 CU 083701 Rekord 2B-Z-IKZN TIN

CU 780 CW 133701 Rekord 2B-SPEED TIN

CU 782 CW 203701 Rekord 2B-SPEED IKZN-TIN

CU 776 CW 12F001 Rekord 2B-SYNCHRO IKZN-TIN-T1


4 4 4 4 4

14 13 12 11 10 9 8 7 7 6 6 5 4 1/2

In stock

9

UNC

UNC

Machine Taps UN-Coarse Threads DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 376For lubricant-free thread cutting in a broad range of materials

HSS Extra

New

New


Reduced Shank (7/16 - 2)l1 l2 l2 10 x P

d1

d2

Hole Shapes60 P



2BX B/4-5 BU 728 BW 213701 Rekord 1B-KO TIN

2B D/4-5 BU 325 BU 306001 Rekord 1C-TI

3B D/4-5 BU 327 BU 306011 Rekord 1C-TI

3BX D/4-5 BU 337 BU 309611 Rekord 1C-TI TICN

New 3BX D/4-5 BU 339 BU 30J411 Rekord 1C-NI TICN Flutes

Flutes

Flutes

2 2 2 3 3 3 3 3 3 3

Flutes

3 3 4 4

2 2 2 2 2 3 3 3 3 3 3 3

2 2 3 3 3 3 3 3



CU 784 CW 213701 Rekord 2B-KO TIN

Flutes

Flutes

Flutes

Flutes

4 4 4 4

3 3 3 3 3 3 3 3 4 4 4 4

3 3 3 3 3 3 3 3 4 4 4 4

3 3 3 3 3

10

Ordering example: BW213701.5007, No.10-24 UNC-2BX, Rekord 1B-KO-TIN

Flutes 3 3 3 3 3

CU 256 CU 306001 Rekord 2C-TI

CU 258 CU 306011 Rekord 2C-TI

CU 812 CU 309611 Rekord 2C-TI TICN

CU 814 CU 30J411 Rekord 2C-NI TICN

Flutes 2 2 3 3 3 3 3 3

Machine Taps UN-Coarse Threads


New

Chamfer

Description

lA

Form C = 2-3 Thr.

lA

Form D = 4-5 Thr.

Symbols IKZ

Description

2B C/2-3 BU 401 BU 453000 Rekord 1D-VA

2B C/2-3 BU 417 BU 45D100 Rekord 1D-VA CRN

IKZ

2B C/2-3 BU 419 BU 451400 Rekord 1D TIN

3B C/2-3 BU 403 BU 456011 Rekord 1D-TI

3BX C/2-3 BU 818 BU 459611 Rekord 1D-TI TICN

2B C/2-3 BU 423 BU 979300 Rekord 1D-VA-IKZ TICN

2B C/2-3 BU 397 BU 456001 Rekord 1D-TI

With Special Cutting Geometry NT/NT2 Nitrided Cromium Nitrided (CrN) TiN Coating TiCN Coating Axial coolant thru for blind hole applications


Flutes

Flutes

Flutes

Flutes

Flutes

2 2 2 2 2 3 3 3 3 3 3 3

2 2 2 2 2 3 3 3 3 3 3

2 2 2 2 2 3 3 3 3 3 3

3 3 3 3

2 2 2 2 2 3 3 3 3 3 3 3

Flutes

2 2 2 2 2 3 3 3 3 3 3 3

3 3 3 3

64 56 48 40 40 32 32 24 24 20 18 16

Flutes

Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3 3 3 3 3 4

3 3 3 3 3

3 3 3 3 3

3 3 3 3 3

3 3 3 3 3 3 3

3 3 3 3 3 3 3

Flutes

CU 323 CU 453000 Rekord 2D-VA

CU 347 CU 45D100 Rekord 2D-VA CRN

CU 853 CU 979300 Rekord 2D-VA-IKZ TICN

CU 349 CU 451400 Rekord 2D TIN

CU 319 CU 456001 Rekord 2D-TI

CU 325 CU 456011 Rekord 2D-TI

CU 880 CU 459611 Rekord 2D-TI TICN


3 3 3 3 3

14 13 12 11 10 9 8 7 7 6 6 5 4 1/2

In stock

11

UNC

UNC


HSS ExtraResists heat stress without additional wear even at high speeds. Tap up to 325 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads

New

New

New

New


Reduced Shank (7/16 - 2)l1 l2 l2 10 x P l2 10 x P l2 10 x P l2 10 x P

d1

d2

Hole Shapes60 P



3BX C/2-3 BU 816 BU 35J411 Rekord 1DF-NI TICN

2BX C/2-3 BU 806 BU 453701 Rekord 1D-Z TIN

IKZ

2BX C/2-3 BU 810 BU 263701 Rekord 1D-S TIN

NewIKZ

2BX C/2-3 BU 808 BU 973701 Rekord 1D-Z-IKZ TIN

2BX C/2-3 BU 812 BU 293701 Rekord 1D-S-IKZ TIN

Flutes

Flutes

Flutes

Flutes

2 2 3 3 3 3 3 3

2 2 3 3 3 3 3 3

3 3 3 3

2 2 3 3 3 3 3 3



CU 878 CU 35J411 Rekord 2DF-NI TICN

CU 868 CU 453701 Rekord 2D-Z TIN

CU 870 CU 973701 Rekord 2D-Z-IKZ TIN

CU 872 CU 263701 Rekord 2D-S TIN

CU 874 CU 293701 Rekord 2D-S-IKZ TIN

Flutes

Flutes

Flutes

Flutes

3 3 3 3 3

3 3 3 3 3

3 3 3 3 3

3 3 3 3

12

Ordering example: BU35J411.5003, No.4-40 UNC-3BX, Rekord 1DF-NI-TICN

Flutes 3 3 3 3

Flutes 3 3 3 3

Machine Taps UN-Coarse ThreadsFor lubricant-free thread cutting in a broad range of materials


New

Chamfer

Description

lA

Form C = 2-3 Thr.

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

Symbols IKZ

Description

2BX C/2-3 BU 814 BU 343701 Rekord 1D-KO TIN 2B C/2-3 BU 458 BU 501000 1 Enorm 3B C/2-3 BU 462 BU 501010 1 Enorm

2B C/2-3 BU 501 BU 503200 1 Enorm VA NE2

3B C/2-3 BU 505 BU 503210 1 Enorm VA NE2

With Special Cutting Geometry Ne2 Neutralized TiN Coating TiCN Coating Axial coolant thru for blind hole applications


Flutes

Flutes

3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

Flutes

2 2 2 2 3 3 3 3 3 3 3 3

Flutes

2 2 2 2 3 3 3 3 3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

64 56 48 40 40 32 32 24 24 20 18 16

CU 876 CU 343701 Rekord 2D-KO TIN

Flutes

Flutes

Flutes

3 3 3 3

3 3 3 3 3 4 4 4 4 4 4 5 5

Flutes

3 3 3 3 3 4

3 3 3 3 3 4 4 4 4 4 4 5 5

Flutes

CU 382 CU 501000 2 Enorm

CU 386 CU 501010 2 Enorm

CU 445 CU 503200 2 Enorm VA NE2

CU 449 CU 503210 2 Enorm VA NE2


3 3 3 3 3 4 4 4 4 4 4 5 5

14 13 12 11 10 9 8 7 7 6 6 5 4 1/2

In stock

13

UNC

UNC


HSS Extra

New


Reduced Shank (7/16 - 2)l1 l2

d1

d2

Hole Shapes60 P

UNCReinforced ShankNominal Size d1 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I. l1 64 56 48 40 40 32 32 24 24 20 18 16 1.772 1.772 1.969 2.205 2.205 2.205 2.480 2.756 3.150 3.150 3.543 3.937 l2 inch l3 0.551 0.709 0.709 0.787 0.827 0.984 1.142 1.181 1.378 1.535 d2 0.141 0.141 0.141 0.141 0.141 0.141 0.168 0.194 0.220 0.255 0.318 0.381


2B E/1.5-2 BU 460 BU 513500 1 Enorm Z/E

3B E/1.5-2 BU 870 BU 513510 1 Enorm Z/E

2B E/1.5-2 BU 845 BU 51D200 1 Enorm Z/E CRN

2B E/1.5-2 BU 483 BU 513700 1 Enorm Z/E TIN

New 2B E/1.5-2 BU 872 BU 519400 1 Enorm Z/E TICN Flutes

Flutes

2 2 2 2 3 3 3 3 3 3 3 3

Flutes

Flutes

approximately 10 x P

2 3 3 3 3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

2 2 2 2 3 3 3 3 3 3 3 3

Reduced ShankNominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 T.P.I. l1 14 13 12 11 10 9 8 7 7 6 6 5 4 1/2 3.937 4.331 4.331 4.331 4.921 5.512 6.299 7.087 7.087 7.874 7.874 8.661 9.843 l2 inch l3 d2 0.323 0.367 0.429 0.480 0.590 0.697 0.800 0.896 1.021 1.108 1.233 1.430 1.644


Flutes

Flutes

Flutes

Flutes

approximately 10 x P

4 4 4 4 4 5 5

4 4 4 4 4 5 5

4 4 4 4 4 5 5

4 4 4 4 4 5 5

14

Ordering example: BU513500.5000, No.1-64 UNC-2B, 1 Enorm-Z/E

Flutes 4 4 4 4 4 5 5

CU 384 CU 513500 2 Enorm Z/E

CU 936 CU 513510 2 Enorm Z/E

CU 908 CU 51D200 2 Enorm Z/E CRN

CU 421 CU 513700 2 Enorm Z/E TIN

CU 938 CU 519400 2 Enorm Z/E TICN

Flutes 2 3 3 3 3 3 3 3

Machine Taps UN-Coarse ThreadsResists heat stress without additional wear even at high speeds. Tap up to 325 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads Specifically for use on CNC machines with synchronous control and the use of KSN/Softsynchro Tap Holders


New

New

New

Chamfer

Description

lA

Form E = 1.5-2 Thr.

lA

Form C = 2-3 Thr.

Symbols IKZ

Description

IKZ

2B C/2-3 BU 864 BU 50C400 1 Enorm Z GLT-1

IKZ

IKZ

IKZ

IKZ

2B C/2-3 BU 866 BU 94C400 1 Enorm Z-IKZ GLT-1

2B C/2-3 BU 848 BW 55D200 1 Enorm S-IKZ CRN

2B C/2-3 BU 842 BW 553700 1 Enorm S-IKZ TIN

2B C/2-3 BU 868 BU 14F000 1 Enorm SYNCHRO-IKZ TIN-T1

2B E/1.5-2 BU 851 BU 999400 1 Enorm Z/E-IKZ TICN

With Special Cutting Geometry Cromium Nitrided (CrN) TiN Coating TiCN Coating GLT-1 Coating Very Short Chamfer Axial coolant thru for blind hole applications


Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3

2 3 3 3 3 3 3 3

3 3 3 3

3 3 3 3

3 3 3

3 3 3

64 56 48 40 40 32 32 24 24 20 18 16

CU 914 CU 999400 2 Enorm Z/E-IKZ TICN

CU 928 CU 50C400 2 Enorm Z GLT-1

CU 930 CU 94C400 2 Enorm Z-IKZ GLT-1

CU 911 CW 55D200 2 Enorm S-IKZ CRN

CU 906 CW 553700 2 Enorm S-IKZ TIN

CU 932 CU 14F000 2 Enorm SYNCHRO-IKZ TIN-T1

Reduced ShankEDP Dimen. ID 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 Nominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 Flutes T.P.I.

Flutes

Flutes

Flutes

Flutes

4 4 4 4 5

4 4 4 4 4

4 4 4 4 4

Flutes

4 4 4 4

4 4 4 4

4 4 4 4 4

14 13 12 11 10 9 8 7 7 6 6 5 4 1/2

In stock

15

UNC

UNC

Roll Form Taps UN-Coarse Threads DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 376

HSS Extra

Reinforced Shank (No.1 - 3/8)l1 l3 l2 d1 d2 l1 l2

Reduced Shank (7/16 - 2)Special core hole diameters are required for the use of roll form taps.Hole Shapes60 P


d1

d2


2B C/2-3 BU 543 BU 921000 GFU 1Druck-S-OLN

2B C/2-3 BU 568 BU 921700 GFU 1Druck-S-OLN CRN

2B C/2-3 BU 556 BU 921400 GFU 1Druck-S-OLN TIN

2B 2B E/1.5-2 E/1.5-2 BU 572 BU 570 BU 931700 BU 931400 GFU GFU 1Druck-S-OLN/E 1Druck-S-OLN/E CRN TIN

Reduced ShankNominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 T.P.I. l1 14 13 12 11 10 9 8 3.937 4.331 4.331 4.331 4.921 5.512 6.299 l2 0.866 0.984 1.024 1.063 1.181 1.260 1.417 inch l3 d2 0.323 0.367 0.429 0.480 0.590 0.697 0.800

Catalog No. EDP Tool Identification EDP Dimen. D ID 0.242 0.4040 5012 0.275 0.4600 5013 0.322 0.5200 5014 0.360 0.5780 5015 0.442 0.7030 5016 0.523 0.8200 5017 0.600 0.9380 50181

CU 485 CU 921000 GFU 2Druck-S-OLN

CU 664 CU 921700 GFU 2Druck-S-OLN CRN

CU 499 CU 921400 GFU 2Druck-S-OLN TIN

16

Ordering example: BU921000.5001, No.2-56 UNC-2B, GFU 1Druck-S-OLN

Roll Form Taps UN-Coarse Threads


New

New

New

Chamfer

Description

lA

Form E = 1.5-2 Thr.

lA

Form C = 2-3 Thr.

Symbolsl2 10 x P l2 10 x P l2 10 x P

Description

IKZN IKZ IKZN

With Special Forming Geometry NT/NT2 Nitrided Cromium Nitrided (CrN) TiN Coating TiCN Coating With Oil Grooves Very Short Chamfer Axial coolant thru for blind hole applications Axial coolant thru with radial flow into the flutes for thru and blind hole applications

2B E/1.5-2 BU 574 BU 939000 GFU 1Druck-S-OLN/E TICN

IKZ

IKZ

IKZ

2BX C/2-3 BU 948 BU 92F000 GFU 1Druck-Z-OLN TIN-T1

IKZ

2B C/2-3 BU 578 BW 921700 GFU 1Druck-S-OLN IKZ-CRN

2B C/2-3 BU 576 BW 921400 GFU 1Druck-S-OLN IKZ-TIN

2B C/2-3 BU 920 BW 929000 GFU 1Druck-S-OLN IKZ-TICN

2BX C/2-3 BU 970 BW 92F000 GFU 1Druck-Z-OLN IKZ-TIN-T1

2BX C/2-3 BU 972 BW 10F000 GFU 1Druck-Z-OLN IKZN-TIN-T1

Reinforced ShankEDP Dimen. ID 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 Nominal Size d1 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I.

64 56 48 40 40 32 32 24 24 20 18 16

CU 689 CU 92F000 GFU 2Druck-Z-OLN TIN-T1

CU 691 CW 92F000 GFU 2Druck-Z-OLN IKZ-TIN-T1

CU 693 CW 10F000 GFU 2Druck-Z-OLN IKZN-TIN-T1

Reduced ShankEDP Dimen. ID 5012 5013 5014 5015 5016 5017 5018 Nominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 T.P.I.

14 13 12 11 10 9 8

In stock

17

UNC

UNC

Machine Taps Robust 2X-VA UN-Coarse Threads DIN Length ANSI ShankOverall length acc. to DIN 376

HSS Extra

Chamfer

Description

Reduced Shankl1 l2

lA

Form C = 2-3 Thr.

d1

d2

Symbols Hole Shapes60 P

Description

With Special Cutting Geometry NT/NT2 Nitrided

For tapping blind and through holes up to 1.5 x d1 in very difficult materials (stainless steel etc.) up to approximately 174,000 psi (38 Rc). Good machinability up 2 x d1.

UNCNominal Size d1 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 T.P.I. l1 10 9 8 7 7 6 6 5 4 1/2 4.921 5.512 6.299 7.087 7.087 7.874 7.874 8.661 9.843 l2 1.181 1.260 1.417 1.575 1.575 1.969 1.969 2.283 2.559 inch d2 0.590 0.697 0.800 0.896 1.021 1.108 1.233 1.430 1.644

Special Characteristics Surface Treatment Class of fit Chamfer (lA) Catalog No. EDP Tool Identification EDP Dimen. D ID 0.442 0.6563 5016 0.523 0.7656 5017 0.600 0.8750 5018 0.672 0.9843 5019 0.766 1.1094 5020 0.831 1.2205 5021 0.925 1.3386 5022 1.072 1.5551 5023 1.233 1.7812 50241

2B C/2-3 CU 514 CU 803001 Robust 2X-VA

3B C/2-3 CU 518 CU 803011 Robust 2X-VA

Flutes

5 5 5 5 6 6 6 6 6

The Complete Tool SystemRobust 2X-VA Taps when used with a KSN Type tapping attachment creates the optimal tapping unit!

Larger sizes priced upon request. We have experience in making taps as large as 10 inches UN.

18

In stock

Ordering example: CU803001.5016, 3/4-10 UNC-2B, Robust 2X-VA

Flutes 5 5 6 6 6

Machine Taps Roll Form Taps UNF

UNF

UN-Fine Threads

19

Machine Taps UN-Fine Threads UNF ANSI Length ANSI Shank

HSS Extra



d1

Hole Shapes60 P

UNFNominal T.P.I. Size l1 d1 40 2 No. 6 36 2 1/8 No. 8 32 2 3/8 No. 10 1/4 28 2 1/2 5/16 24 2 23/32 3/8 24 2 15/16 7/16 20 3 5/32 1/2 20 3 3/8 9/16 18 3 19/32 5/8 18 3 13/16 3/4 16 4 1/4 l2 2.00 2.13 2.38 2.50 2.72 2.94 3.16 3.38 3.59 3.81 4.25 inch l3 0.748 0.827 0.945 1.142 1.299 1.378 d2 0.141 0.168 0.194 0.255 0.318 0.381 0.323 0.367 0.429 0.480 0.590

Special Characteristics Surface Treatment Class of fit Chamfer (lA) Catalog No. EDP Tool Identification EDP Dimen. D ID 0.110 0.1181 5039 0.131 0.1378 5040 0.152 0.1614 5041 0.191 0.2165 5043 0.238 0.2717 5044 0.286 0.3346 5045 0.242 0.3898 5046 0.275 0.4528 5047 0.322 0.5118 5048 0.360 0.5709 5049 0.442 0.6890 50501

2B C/2-3 AU 434 AU 100501 Rekord A-H

2B C/2-3 AU 756 AU 109101 Rekord A-H TICN



Oversize B/4-5 AU 467 AU 203044 Rekord B-VA

Flutes

Flutes

Flutes

Flutes

0.472 0.512 0.591 0.669 0.669 0.709 0.866 0.866 0.866 0.866 0.984

3 3 3 3 3 4 4 4 4 4 4

3 3 3 3 3 4 4 4 4 4 4

3 3 3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 4

1) (+.0035) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050)

1)


20

Ordering example: AU100501.5039, No.6-40 UNF-2B, Rekord A-H

Flutes 3 3 3 3 3 3 3

Machine Taps UN-Fine Threads

HSS Extra ANSI Length ANSI Shank UNF

Chamfer

Description

lA

Form C = 2-3 Thr.

lA


Symbols

Description

2B B/4-5 AU 461 AU 201400 Rekord B TIN





With Special Cutting Geometry NT/NT2 Nitrided TiN Coating TiCN Coating

3 3 3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 3 3 4

3 3 3 3 3 3 3 3 4

EDP Dimen. ID 5039 5040 5041 5043 5044 5045 5046 5047 5048 5049 5050

Nominal Size d1 No. 6 No. 8 No. 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

Flutes

Flutes

Flutes

Flutes

Flutes

T.P.I.

40 36 32 28 24 24 20 20 18 18 16

In stock

21

Machine Taps UN-Fine Threads UNF ANSI Length ANSI Shank

HSS Extra


l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

l1 l2

d1

d2

Hole Shapes60 P

UNFNominal T.P.I. Size l1 d1 40 2 No. 6 36 2 1/8 No. 8 32 2 3/8 No. 10 1/4 28 2 1/2 5/16 24 2 23/32 3/8 24 2 15/16 7/16 20 3 5/32 1/2 20 3 3/8 9/16 18 3 19/32 5/8 18 3 13/16 3/4 16 4 1/4 l2 2.00 2.13 2.38 2.50 2.72 2.94 3.16 3.38 3.59 3.81 4.25 inch l3 0.748 0.827 0.945 1.142 1.299 1.378 d2 0.141 0.168 0.194 0.255 0.318 0.381 0.323 0.367 0.429 0.480 0.590

Special Characteristics Surface Treatment Class of fit Chamfer (lA) Catalog No. EDP Tool Identification EDP Dimen. D ID 0.110 0.1181 5039 0.131 0.1378 5040 0.152 0.1614 5041 0.191 0.2165 5043 0.238 0.2717 5044 0.286 0.3346 5045 0.242 0.3898 5046 0.275 0.4528 5047 0.322 0.5118 5048 0.360 0.5709 5049 0.442 0.6890 50501



Oversize C/2-3 AU 570 AU 503244 Enorm VA NE2

2B E/1.5-2 AU 557 AU 513500 Enorm Z/E

l2 10 x P


3B E/1.5-2 AU 558 AU 513510 Enorm Z/E

Flutes

Flutes

Flutes

Flutes

0.472 0.512 0.591 0.669 0.669 0.709 0.866 0.866 0.866 0.866 0.984

3 3 3 3 3 3 3 4 4 4 4

3 3 3 3 3 4 4 4 4

1) (+.0035) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050) (+.0050)

3 3 3 3 3 4 4

3 3 3 3 3 3 4 5 5 5 5

1)


22

Ordering example: AU503200.5039, No.6-40 UNF-2B, Enorm-VA-NE2

Flutes 3 3 3 3 4 5 5 5 5

Machine Taps/Roll Form Taps UN-Fine Threads

HSS Extra ANSI Length ANSI Shank UNF

Chamfer

Description

lA

Form E = 1.5-2 Thr.

lA l2 10 x P l2 10 x P

Form C = 2-3 Thr.

Roll Form Taps:

lA

Form C = 2-3 Thr.

Symbols

Description



Special core hole diameters are required for the use of roll form taps.Flutes

2B C/2-3 AU 689 AU 921400 GFU Druck-S-OLN TIN

2B C/2-3 AU 692 AU 921700 GFU Druck-S-OLN CRN

With Special Cutting Geometry Ne2 Neutralized Cromium Nitrided (CrN) TiN Coating With Oil Grooves Very Short Chamfer

D1

3 3 3 3 3 3 4 5 5 5 5

3 3 3 3 4 5 5 5 5

0.1260 0.1520 0.1750 0.2340 0.2930 0.3550 0.4130 0.4760 0.5350 0.5980 0.7190

EDP Dimen. ID 5039 5040 5041 5043 5044 5045 5046 5047 5048 5049 5050

Nominal Size d1 No. 6 No. 8 No. 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

Flutes

T.P.I.

40 36 32 28 24 24 20 20 18 18 16

In stock

23

Machine Taps UN-Fine Threads UNF DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 374

HSS Extra

New

New


Reduced Shank (7/16 - 1 1/2)l1 l2 l2 10 x P l2 10 x P l2 10 x P

d1

d2

Hole Shapes60 P

UNFReinforced ShankNominal Size d1 No. 0 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I. l1 80 72 64 56 48 44 40 36 32 28 28 24 24 1.575 1.772 1.772 1.969 2.205 2.205 2.205 2.480 2.756 3.150 3.150 3.543 3.937 l2 0.315 0.315 0.354 0.354 0.433 0.433 0.472 0.512 0.512 0.630 0.669 0.669 0.709 inch l3 0.551 0.709 0.709 0.787 0.827 0.984 1.142 1.181 1.260 1.535 d2 0.141 0.141 0.141 0.141 0.141 0.141 0.141 0.168 0.194 0.220 0.255 0.318 0.381


2B C/2-3 BU 227 BU 100501 Rekord 1A-H

2BX C/2-3 BU 668 BU 109401 Rekord 1A-Z TICN

NewIKZ

IKZN

2BX C/2-3 BU 670 BU 959401 Rekord 1A-Z-IKZ TICN

2BX C/2-3 BU 673 BU 219401 Rekord 1A-Z-IKZN TICN

Flutes

Flutes

Flutes

2 2 3 3 3 3 3 3 3 3 3 3 4

3 3 3 4

3 3 3 4

Reduced ShankNominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 T.P.I. l1 20 20 18 18 16 14 12 12 12 12 12 3.937 3.937 3.937 3.937 4.331 4.921 5.512 5.906 5.906 6.693 6.693 l2 0.866 0.866 0.866 0.866 0.984 1.024 1.102 1.181 1.181 1.299 1.299 inch l3 d2 0.323 0.367 0.429 0.480 0.590 0.697 0.800 0.896 1.021 1.108 1.233

Catalog No. EDP Tool Identification EDP Dimen. D ID 0.242 0.3898 5046 0.275 0.4528 5047 0.322 0.5118 5048 0.360 0.5709 5049 0.442 0.6890 5050 0.523 0.8071 5051 0.600 0.9219 5052 0.672 1.0433 5053 0.766 1.1719 5054 0.831 1.2992 5055 0.925 1.4173 50561

Flutes

Flutes

4 4 4 4 4 4 4

Flutes

4 4 4 4 4

4 4 4 4 4

24

Ordering example: BU100501.5033, No.0-80 UNF-2B, Rekord 1A-H

Flutes 4 4 4 4 4

CU 138 CU 100501 Rekord 2A-H

CU 731 CU 109401 Rekord 2A-Z TICN

CU 733 CU 959401 Rekord 2A-Z-IKZ TICN

CU 736 CU 219401 Rekord 2A-Z-IKZN TICN

Flutes 3 3 3 4

Machine Taps UN-Fine ThreadsResists heat stress without additional wear even at high speeds. Tap up to 260 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads For lubricant-free thread cutting in a broad range of materials


New

New

New

New

Chamfer

Description

lA

Form C = 2-3 Thr.

lA

Form B = 4-5 Thr.

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

Symbols

Description

IKZ

IKZN

2BX C/2-3 BU 675 BU 339401 Rekord 1A-KO TICN

2BX C/2-3 BU 677 BU 33B401 Rekord 1A-KO TIALN-T4 2B B/4-5 BU 275 BU 201000 Rekord 1B

3B B/4-5 BU 277 BU 201010 Rekord 1B 2B B/4-5 BU 276 BU 203000 Rekord 1B-VA

IKZ IKZN

2BX C/2-3 BU 665 BW 159401 Rekord 1A-S-IKZ TICN

2BX C/2-3 BU 671 BW 179401 Rekord 1A-S-IKZN TICN

With Special Cutting Geometry NT/NT2 Nitrided TiCN Coating TiAlN Coating Axial coolant thru for blind hole applications Axial coolant thru with radial flow into the flutes for thru and blind hole applications

Reinforced ShankEDP Dimen. ID 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 Nominal Size d1 No. 0 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 Flutes T.P.I.

Flutes

Flutes

Flutes

Flutes

Flutes

3 3 3 3 4

3 3 3 3 4

3 3 3 4

3 3 3 4

2 2 2 2 2 3 3 3 3 3 3 3 4

Flutes

2 3 3 3 3 3 3 3 4

2 2 2 2 2 3 3 3 3 3 3 3 4

80 72 64 56 48 44 40 36 32 28 28 24 24

CU 728 CW 159401 Rekord 2A-S-IKZ TICN

CU 734 CW 179401 Rekord 2A-S-IKZN TICN

CU 739 CU 339401 Rekord 2A-KO TICN

CU 741 CU 33B401 Rekord 2A-KO TIALN-T4

Flutes

Flutes

Flutes

Flutes

Flutes

4 4

4 4 4 4

4 4

4 4

Flutes

4

3 3 3 3 4 4 4 4 4 4 4

3 3 3 3 4

Flutes




Reduced ShankEDP Dimen. ID 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 Nominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 T.P.I.

3 3 3 3 4 4 4 4 4 4 4

20 20 18 18 16 14 12 12 12 12 12

In stock

25

UNF

Machine Taps UN-Fine Threads UNF DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 374

HSS Extra


Reduced Shank (7/16 - 1 1/2)

d1

Hole Shapes60 P

UNFReinforced ShankNominal Size d1 No. 0 No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 10 No. 12 1/4 5/16 3/8 T.P.I. l1 80 72 64 56 48 44 40 36 32 28 28 24 24 1.575 1.772 1.772 1.969 2.205 2.205 2.205 2.480 2.756 3.150 3.150 3.543 3.937 l2 0.315 0.315 0.354 0.354 0.433 0.433 0.472 0.512 0.512 0.630 0.669 0.669 0.709 inch l3 0.551 0.709 0.709 0.787 0.827 0.984 1.142 1.181 1.260 1.535 d2 0.141 0.141 0.141 0.141 0.141 0.141 0.141 0.168 0.194 0.220 0.255 0.318 0.381



IKZN




2B B/4-5 BU 705 BU 089300 Rekord 1B-VA-IKZN TICN

Flutes

Flutes

Flutes

2 2 2 2 2 3 3 3 3 3 3 3 4

3 3 3 4

2 2 2 2 2 3 3 3 3 3 3 3 4

Flutes

3 3 3 3 4

Reduced ShankNominal Size d1 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 T.P.I. l1 20 20 18 18 16 14 12 12 12 12 12 3.937 3.937 3.937 3.937 4.331 4.921 5.512 5.906 5.906 6.693 6.693 l2 0.866 0.866 0.866 0.866 0.984 1.024 1.102 1.181 1.181 1.299 1.299 inch l3 d2 0.323 0.367 0.429 0.480 0.590 0.697 0.800 0.896 1.021 1.108 1.233

Catalog No. EDP Tool Identification EDP Dimen. D ID 0.242 0.3898 5046 0.275 0.4528 5047 0.322 0.5118 5048 0.360 0.5709 5049 0.442 0.6890 5050 0.523 0.8071 5051 0.600 0.9219 5052 0.672 1.0433 5053 0.766 1.1719 5054 0.831 1.2992 5055 0.925 1.4173 50561

Flutes

Flutes

Flutes

Flutes

3 3 3 3 4 4 4 4 4 4 4

3 3

3 3 3 3 4

3 3 3 3 4

26

Ordering example: BU203010.5033, No.0-80 UNF-3B, Rekord 1B-VA

Flutes 3 3 3 3 4 4 4


CU 753 CU 089300 Rekord 2B-VA-IKZN TICN




Flutes 3 3 3 3 4

Machine Taps UN-Fine ThreadsResists heat stress without additional wear even at high speeds. Tap up to 325 SFM Shorter cycle times High surface quality in the workpiece True-to-gauge threads

HSS ExtraSpecifically for use on CNC machines with synchronous control and the use of KSN/Softsynchro Tap Holders

DIN Length ANSI ShankOverall length acc. to DIN 371, DIN 374

New

New

New

New

New

Chamfer

Description

lA

Form B for Alu. = approx. 3 Thr.

lA

Form B = 4-5 Thr.

l2 10 x P

l2 10 x P

l2 10 x P

l2 10 x P

l

Documents

2005 Threading Full Catalog