Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
The all-new B7 Audi A42.0T Technical Specifications
Technical Specifications The all-new Audi A4 2.0T SedanENGINE:
Type Inline 4-cylinder spark-ignition engine with gasoline direct injection, exhaust turbo-charger with intercooler, 4 valves/cylinder, DOHCArrangement Front mounted, longitudinalBore 3.25 in. 82.5 mmStroke 3.65 in. 92.8 mmDisplacement 121.1 cu. in. 1984 ccCompression ratio 10.5 : 1Fuel requirement Premium unleaded 91 AKI / 95 RON recommended for maximum performanceHorsepower (SAE) 200 hp @ 5100-6000 rpmMax. Torque 207 lbs. ft. @ 1800-5000 rpm
ENGINE DESIGN:Cylinder block Cast ironCrankshaft Forged steel, 4 main bearingsCylinder head Aluminum alloyValve train / intake Intake camshaft adjustment, DOHC belt driven, hydraulic liftersCooling system Water-cooled, thermostatically controlled radiator fanLubrication system Gear pump, pressurized, full flow with oil coolerFuel injection: FSI Direct Injection -The fuel is injected via a common rail system supplied by a demand-controlled high-pressure pump. The fuel is injected
directly into the combustion chamber via an injector positioned at one side between the inlet valves. -The fuel-air mixture is distributed purely homogeneously within the combustion chamber. This provides a distinctive characteristic,placing the emphasis on high performance and agile responsiveness at all engine speeds.-The four-valve cylinder head with low-friction roller cam follower drive has a modified inlet duct geometry that produces even higher tumble values than the naturally-aspirated FSI engine. This results not only in greater refinement, but also in superiorknock resistance and therefore efficiency.
Emission system Dual 3-way catalytic converters w/individual oxygen sensors
ELECTRICAL SYSTEM:Battery 12 volts 80 amp/hrAlternator 14 volts 120 amp
DRIVETRAIN:Transmissions Audi multitronic® CVT (only FrontTrak), 6-speed manual (FrontTrak/quattro), 6-speed automatic w/tiptronic (only quattro)
Type Front-wheel drive quattroManual 6-speed multitronic® CVT Manual 6-speed Automatic 6-speed w/ Tiptronic®
Gear ratios: 1st 3.667:1 2.378:1 3.667:1 4.171:12nd 2.053:1 1.510:1 2.053:1 2.340:13rd 1.423:1 1.080:1 1.423:1 1.521:14th 1.065:1 0.840:1 1.065:1 1.143:15th 0.853:1 0.670:1 0.853:1 0.867:16th 0.730:1 0.544:1 0.730:1 0.691:27th 0.381:1
Front Differential Hypoid gear, electronically locking (EDL) Hypoid gear, electronically locking (EDL)Center Differential TORSEN® (TORque SENsing) differential providing
automatic and variable front to rear power proportioning
Rear Differential Hypoid gear, electronically locking (EDL)
STEERING:
Type Maintenance-free rack-and-pinion steering with Servotronic electronic power assist
Ratio 16.3:1
Turns (lock-to-lock) n.a.
Turning circle (curb-to-curb) 36.4 ft. 11.1 m
SUSPENSION:
Front Four-link front suspension, upper and lower wishbones, tubular anti-roll bar
Rear Independent-wheel, trapezoidal-link rear suspension with resiliently mounted subframe, anti-roll bar
BRAKES:
Service brake Dual circuit brake system with diagonal split, Anti-lock Brake System (ABS), Electronic Brake pressure Distribution (EBD) and
Electronic Stabilization Program, upgraded version 8.0 (ESP) with brake disc wiping feature; tandem brake booster
Front, size and type 12.6 in. 320x30 mm - Ventilated disc / ContiTeves FNRG-60
Rear, size and type 11.3 in. 288x12 mm - Solid disc / TRW CII-41
Parking brake Mechanically actuated at the rear wheels
12
The all-new B7 Audi A42.0T Technical Specifications
Technical Specifications (continued) The all-new Audi A4 2.0T SedanWHEELS: Standard 16" (C2F) Optional 17" (C1X); individual option
Size 7J x 16 7.5J x 17
Offset 42 mm 45 mm
Weight 10,000 g / 22 lbs 11,800 g / 26 lbsType Cast alloy Cast alloy
TIRES: Optional 17" (H8A performance) or (HG6 all-season) Size 235 / 45 C8F double-spoke wheelSpeed rating Y or H part of sport packageConstruction RadialLoad Index 94Brand / Type (all approved) Michelin Pilot Primacy (performance)
Conti Sport Contact 2 (performance)Pirelli P6 FourSeasons (all-seasons)
BODY:Material Unitized steel structure with integrated aluminum and magnesium componentsCorrosion protection All steel parts are 100% dual-side zinc-galvanized. (12-year limited warranty against corrosion perforation)
CAPACITIES:Front wheel drive quattro
Engine oil 6.3 qt. 6 liter 6.3 qt. 6 literFuel tank 18.5 gal. 70 liter 16.6 gal. 63 literCooling system 9.5 qt. 9 liter 9.5 qt. 9 liter
EXTERIOR DIMENSIONS:Front wheel drive quattro
Wheelbase 104.3 in. 2648 mm 104.3 in. 2648 mmTrack: front / rear 59.9 in. 1522 mm / 59.9 in. 1522 mm 59.9 in. 1522 mm / 59.9 in. 1522 mmOverall length 180.6 in. 4586 mm 180.6 in. 4586 mmOverall width / with mirrors 69.8 in. 1772 mm / 76.3 in. 1937 mm 69.8 in. 1772 mm / 76.3 in. 1937 mmHeight (unloaded) 56.2 in. 1427 mm 56.2 in. 1427 mmGround clearance (loaded) 4.2 in. 106 mm 4.2 in. 106 mmCurb weight: man. / auto. 3362 lbs. 1525 kg / 3417 lbs. 1550 kg 3517 lbs. 1595 kg / 3583 lbs. 1625 kgDistribution: % front / rear 60 / 40 60 / 40 58 / 42 59 / 41Drag coefficient: Front / quattro Cw = 0.33 Frontal Area = 2.18 sq.m.
INTERIOR DIMENSIONS (SAE measurements):Seating Capacity 5EPA class CompactHead room front / rear 38.4 in. 976 mm / 37.24 in. 946 mm w/sunroof front / rear 37.9 in. 962 mm / 37.1 in. 942 mmShoulder room front / rear 55.1 in. 1400 mm / 53.43 in. 1357 mmLeg room front / rear 41.3 in. 1050 mm / 34.25 in. 870 mmInt. volume Sedan front / rear 50.7 cu. ft. 1436 liters / 39.4 cu. ft. 1116 litersLuggage Capacity Sedan 13.4 cu. ft. 380 liters 103.5 = total of cu. ft (including trunk volume)Int. Volume Avant front / rear 50.7 cu. ft. 1436 liters / 40.1 cu. ft. 1136 litersLuggage Capacity Avant 27.8 cu. ft. 787 liters 118.6 = total of cu. ft (including trunk volume)
PERFORMANCE:Front wheel drive quattro
Manual 6-speed multitronic® CVT Manual 6-speed Automatic 6-speed w/ Tiptronic®
0-50 mph (0-80kmh) 5.1 sec. 5.1 sec. 5.3 sec. 5.5 sec.0-60 mph (0-100 km/h) 7.1 sec. 7.1 sec. 7.3 sec. 7.5 sec.
Top speed Top speed is electronically limited at 130 MPH (208 km/h)
FUEL ECONOMY: EPA estimate
Front wheel drive quattroManual 6-speed multitronic® CVT Manual 6-speed Automatic 6-speed w/ Tiptronic®
City TBD mpg 24 mpg 22 mpg 22 mpgHighway TBD mpg 32 mpg 31 mpg 30 mpgCombined TBD mpg 27 mpg 25 mpg 25 mpg
FUEL CONSUMPTION: Canadian Estimate (not yet finalized)Manual 6-speed multitronic® CVT Manual 6-speed Automatic 6-speed w/ Tiptronic®
City TBD liters/100km 9.8 liters/100km 10.6 liters/100km 10.8 liters/100kmHighway TBD liters/100km 6.7 liters/100km 7 liters/100km 7.2 liters/100km
12
The all-new B7 Audi A42.0T Technical Specifications
Technical Specifications The all-new Audi A4 2.0T AvantENGINE:
Type Inline 4-cylinder spark-ignition engine with gasoline direct injection, exhaust turbo-charger with intercooler, 4 valves/cylinder, DOHCArrangement Front mounted, longitudinalBore 3.25 in. 82.5 mmStroke 3.65 in. 92.8 mmDisplacement 121.1 cu. in. 1984 ccCompression ratio 10.5 : 1Fuel requirement Premium unleaded 91 AKI / 95 RON recommended for maximum performanceHorsepower (SAE) 200 hp @ 5100-6000 rpmMax. Torque 207 lbs. ft. @ 1800-5000 rpm
ENGINE DESIGN:Cylinder block Cast ironCrankshaft Forged steel, 4 main bearingsCylinder head Aluminum alloyValve train / intake Intake camshaft adjustment, DOHC belt driven, hydraulic liftersCooling system Water-cooled, thermostatically controlled radiator fanLubrication system Gear pump, pressurized, full flow with oil coolerFuel injection / -The fuel is injected via a common rail system supplied by a demand-controlled high-pressure pump. The fuel is injected Ignition system directly into the combustion chamber via an injector positioned at one side between the inlet valves.
-The fuel-air mixture is distributed purely homogeneously within the combustion chamber. This provides a distinctive characteristic,placing the emphasis on high performance and agile responsiveness at all engine speeds.-The four-valve cylinder head with low-friction roller cam follower drive has a modified inlet duct geometry that produces even higher tumble values than the naturally-aspirated FSI engine. This results not only in greater refinement, but also in superiorknock resistance and therefore efficiency.
Emission system Dual 3-way catalytic converters w/individual oxygen sensors
ELECTRICAL SYSTEM:Battery 12 volts 80 amp/hrAlternator 14 volts 120 amp
DRIVETRAIN:Transmissions 6-speed
Type quattroManual 6-speed Automatic 6-speed w/ Tiptronic®
Gear ratios: 1st 3.667:1 4.171:12nd 2.053:1 2.340:13rd 1.423:1 1.521:14th 1.065:1 1.143:15th 0.853:1 0.867:16th 0.730:1 0.691:27th
Front Differential Hypoid gear, electronically locking (EDL)Center Differential TORSEN® (TORque SENsing) differential providing
automatic and variable front to rear power proportioning
Rear Differential Hypoid gear, electronically locking (EDL)
STEERING:
Type Maintenance-free rack-and-pinion steering with Servotronic electronic power assist
Ratio 16.3:1
Turns (lock-to-lock) n.a.
Turning circle (curb-to-curb) 36.4 ft. 11.1 m
SUSPENSION:
Front Four-link front suspension, upper and lower wishbones, tubular anti-roll bar
Rear Independent-wheel, trapezoidal-link rear suspension with resiliently mounted subframe, anti-roll bar
BRAKES:
Service brake Dual circuit brake system with diagonal split, Anti-lock Brake System (ABS), Electronic Brake pressure Distribution (EBD) and
Electronic Stabilization Program, upgraded version 8.0 (ESP) with brake disc wiping feature; tandem brake booster
Front, size and type 12.6 in. 320x30 mm - Ventilated disc / ContiTeves FNRG-60
Rear, size and type 11.3 in. 288x12 mm - Solid disc / TRW CII-41
Parking brake Mechanically actuated at the rear wheels
12
The all-new B7 Audi A42.0T Technical Specifications
Technical Specifications (continued) The all-new Audi A4 2.0T AvantWHEELS: Standard 16" (C2F) Optional 17" (C1X); individual option
Size 7J x 16 7.5J x 17
Offset 42 mm 45 mm
Weight 10,000 g / 22 lbs 11,800 g / 26 lbsType Cast alloy Cast alloy
TIRES: Optional 17" (H8A performance) or (HG6 all-season) Size 235 / 45 C8F double-spoke wheelSpeed rating Y or H part of sport packageConstruction RadialLoad Index 94Brand / Type (all approved) Michelin Pilot Primacy (performance)
Conti Sport Contact 2 (performance)Pirelli P6 FourSeasons (all-seasons)
BODY:Material Unitized steel structure with integrated aluminum and magnesium componentsCorrosion protection All steel parts are 100% dual-side zinc-galvanized. (12-year limited warranty against corrosion perforation)
CAPACITIES:quattro
Engine oil 6.3 qt. 6 literFuel tank 16.6 gal. 63 literCooling system 9.5 qt. 9 liter
EXTERIOR DIMENSIONS:quattro
Wheelbase 104.3 in. 2648 mmTrack: front / rear 59.9 in. 1522 mm / 60 in. 1522 mmOverall length 180.6 in. 4586 mmOverall width / with mirrors 69.8 in. 1772 mm / 76.3 in. 1937 mmHeight (unloaded) 56.2 in. 1427 mmGround clearance (loaded) 4.2 in. 106 mmCurb weight: man. / auto. 3605 lbs. 1635 kg / 3715 lbs. 1685 kgDistribution: % front / rear 58 / 42 59 / 41Drag coefficient: Front / quattro Cw = 0.33 Frontal Area = 2.18 sq.m.
INTERIOR DIMENSIONS (SAE measurements):Seating Capacity 5EPA class CompactHead room front / rear 38.4 in. 976 mm / 37.6 in. 956 mm w/sunroof front / rear 37.9 in. 962 mm / 37.2 in. 946 mmShoulder room front / rear 55.1 in. 1400 mm / 53.43 in. 1357 mmLeg room front / rear 41.3 in. 1050 mm / 34.25 in. 870 mmInt. volume Sedan front / rear 50.7 cu. ft. 1436 liters / 39.4 cu. ft. 1116 litersLuggage Capacity Sedan 13.4 cu. ft. 380 liters 103.5 = total of cu. ft (including trunk volume)Int. Volume Avant front / rear 50.7 cu. ft. 1436 liters / 40.1 cu. ft. 1136 litersLuggage Capacity Avant 27.8 cu. ft. 787 liters 118.6 = total of cu. ft (including trunk volume)
PERFORMANCE:quattroManual 6-speed Automatic 6-speed w/ Tiptronic®
0-50 mph (0-80kmh) 5.3 sec. 5.5 sec.0-60 mph (0-100 km/h) 7.4 sec. 7.6 sec.
Top speed
FUEL ECONOMY:
quattroManual 6-speed Automatic 6-speed w/ Tiptronic®
City 22 mpg 22 mpgHighway 31 mpg 30 mpgCombined 25 mpg 25 mpg
FUEL CONSUMPTION: Manual 6-speed Automatic 6-speed w/ Tiptronic®
City 10.6 liters/100km 10.8 liters/100kmHighway 7 liters/100km 7.2 liters/100km
12
The all-new B7 Audi A43.2 Technical Specifications
Technical Specifications The all-new Audi A4 3.2 SedanENGINE:
Type Aluminum V6 spark-ignition engine with gasoline direct injection, DOHC, 2-stage variable intake manifold w/2 charge movement flaps,demand-controlled high-pressure and low-pressure fuel system
Arrangement Front mounted, longitudinalBore 3.33 in. 84.5 mmStroke 3.65 in. 92.8 mmDisplacement 190.565 cu. in. 3123 ccCompression ratio 10.1 : 1Fuel requirement Premium unleaded 91 AKI / 95 RON recommended for maximum performanceHorsepower (SAE) 255 hp @ 6500 rpmTorque 243 lbs. ft. @ 3250 rpm
ENGINE DESIGN:Cylinder block High integrity aluminum cylinder block with cast-in thin wall gray iron linersCrankshaft Forged steelCylinder head Aluminum alloyValve train / intake DOHC chain driven, hydraulic valve lifters, two-stage variable intake manifoldCooling system Water-cooled, thermostatically controlled radiator fanLubrication system Gear pump, pressurized, full flow with oil coolerFuel injection: FSI Direct Injection -A common rail high-pressure injection system with a newly developed single-piston high-pressure pump operating on demand
ensures exactly the right amount of fuel, delivering precisely the volume required for building up operating pressure between 30 and 110 bar.-The intake tract, also comprising the two-stage variable intake manifold, moving charge-movement flaps provide the necessarytumble effect, swirling the induced air around depending on operating point. In order to achieve the high specific power andtorque values, a new combustion process has been developed. This has the potential for worldwide application and for operation on the fuel grade RON 95/91. Together with the optimum geometry of the combustion chambers and the dosage of fual injected with supreme accuracy down to the last millisecond, this allows a significant increase in compression:-While conventional production engines generally have a compression ratio of now more than 10.5 : 1, the compression ration onAudi's 3.2 FSI power unit is 12.5 : 1 - a record on production cars and the essential prerequisite for the new engine's high standard of efficiency.
Emission system Dual 3-way catalytic converters w/individual oxygen sensorsELECTRICAL SYSTEM:
Battery 12 volts 80 amp/hr
Alternator 14 volts 120 ampDRIVETRAIN:
Transmissions
6-speed automaticwith Tiptronic®
Type quattroAutomatic 6-speed w/ Tiptronic®
Gear ratios: 1st 3.665:1
2nd 1.999:13rd 1.407:14th 1.000:15th 0.742:1
6th -Final Drive 3.091:1
Front Differential Hypoid gear, electronically locking (EDL)Center Differential TORSEN® (TORque SENsing) differential providing
automatic and variable front to rear power proportioning
Rear Differential Hypoid gear, electronically locking (EDL)STEERING:
Type Maintenance-free rack-and-pinion steering with Servotronic electronic power assist
Ratio 16.3:1
Turns (lock-to-lock) n.a.
Turning circle (curb-to-curb) 36.4 ft. 11.1 mSUSPENSION:
Front Four-link front suspension, upper and lower wishbones, tubular anti-roll barRear Independent-wheel, trapezoidal-link rear suspension with resiliently mounted subframe, anti-roll bar
BRAKES:
Service brake Dual circuit brake system with diagonal split, Anti-lock Brake System (ABS), Electronic Brake pressure Distribution (EBD) and
Electronic Stabilization Program, upgraded version 8.0 (ESP) with brake disc wiping feature; tandem brake booster
Front, size and type 12.6 in. 320x30 mm - Ventilated disc / ContiTeves FNRG-60
Rear, size and type 11.3 in. 288x12 mm - Solid disc / TRW CII-41
Parking brake Mechanically actuated at the rear wheels
12
The all-new B7 Audi A43.2 Technical Specifications
Technical Specifications (continued) The all-new Audi A4 3.2 SedanWHEELS: Standard 17" (C1X)
Size 7.5J x 17
Offset 45 mmWeight 11,800 g / 26 lbsType Cast alloy
TIRES: Optional 17" (H8A performance) or (HG6 all-season) Size 235 / 45 C8F double-spoke wheelSpeed rating Y or H
Construction RadialLoad Index 94Brand / Type (all approved) Michelin Pilot Primacy (performance)
Conti Sport Contact 2 (performance)Pirelli P6 FourSeasons (all-seasons)
BODY:Material Unitized steel structure with integrated aluminum and magnesium componentsCorrosion protection All steel parts are 100% dual-side zinc-galvanized. (12-year limited warranty against corrosion perforation)
CAPACITIES:quattro
Engine oil 6.3 qt. 6 liter
Fuel tank 16.6 gal. 63 literCooling system 9.5 qt. 9 liter
EXTERIOR DIMENSIONS:quattro
Wheelbase 104.3 in. 2648 mmTrack: front / rear 59.9 in. 1522 mm / 59.9 in. 1522 mmOverall length 180.6 in. 4586 mmOverall width / with mirrors 69.8 in. 1772 mm / 76.3 in. 1937 mmHeight (unloaded) 56.2 in. 1427 mm
Ground clearance (loaded) 4.2 in. 106 mmCurb weight man. / auto. 3726 lbs. 1690 kgDistribution % front / rear 58 / 42 59 / 41Drag coefficient Cw = 0.31 Frontal Area = 2.18 sq. m.
INTERIOR DIMENSIONS (SAE measurements):Seating Capacity 5EPA class CompactHead room front / rear 38.4 in. 976 mm / 37.24 in. 946 mm w/sunroof front / rear 37.9 in. 962 mm / 37.1 in. 942 mm
Shoulder room front / rear 55.1 in. 1400 mm / 53.43 in. 1357 mm
Leg room front / rear 41.3 in. 1050 mm / 34.25 in. 870 mmInt. volume Sedan front / rear 50.7 cu. ft. 1436 liters / 39.4 cu. ft. 1116 litersLuggage Capacity Sedan 13.4 cu. ft. 380 liters 103.5 = total of cu. ft (including trunk volume)Int. Volume Avant front / rear 50.7 cu. ft. 1436 liters / 40.1 cu. ft. 1136 litersLuggage Capacity Avant 27.8 cu. ft. 787 liters 118.6 = total of cu. ft (including trunk volume)
PERFORMANCE:quattro
Automatic0-50 mph (0-80kmh) 4.8 sec.0-60 mph (0-100 km/h) 6.6 sec.
Top speed Top speed is electronically limited at 130 MPH (208 km/h)
FUEL ECONOMY: EPA estimatequattro
AutomaticCity 19 mpgHighway 26 mpgCombined 21 mpg
FUEL CONSUMPTION: Canadian EstimateAutomatic
City 12.6 liters/100kmHighway 8.2 liters/100km
12
The all-new B7 Audi A43.2 Technical Specifications
Technical Specifications The all-new Audi A4 3.2 AvantENGINE:
Type Aluminum V6 spark-ignition engine with gasoline direct injection, DOHC, 2-stage variable intake manifold w/2 charge movement flaps,demand-controlled high-pressure and low-pressure fuel system
Arrangement Front mounted, longitudinalBore 3.33 in. 84.5 mmStroke 3.65 in. 92.8 mmDisplacement 190.565 cu. in. 3123 ccCompression ratio 10.1 : 1Fuel requirement Premium unleaded 91 AKI / 95 RON recommended for maximum performanceHorsepower (SAE) 255 hp @ 6500 rpmTorque 243 lbs. ft. @ 3250 rpm
ENGINE DESIGN:Cylinder block High integrity aluminum cylinder block with cast-in thin wall gray iron linersCrankshaft Forged steelCylinder head Aluminum alloyValve train / intake DOHC chain driven, hydraulic valve lifters, two-stage variable intake manifoldCooling system Water-cooled, thermostatically controlled radiator fanLubrication system Gear pump, pressurized, full flow with oil coolerFuel injection: FSI Direct Injection -A common rail high-pressure injection system with a newly developed single-piston high-pressure pump operating on demand
ensures exactly the right amount of fuel, delivering precisely the volume required for building up operating pressure between 30 and 110 bar.-The intake tract, also comprising the two-stage variable intake manifold, moving charge-movement flaps provide the necessarytumble effect, swirling the induced air around depending on operating point. In order to achieve the high specific power andtorque values, a new combustion process has been developed. This has the potential for worldwide application and for operation on the fuel grade RON 95/91. Together with the optimum geometry of the combustion chambers and the dosage of fual injected with supreme accuracy down to the last millisecond, this allows a significant increase in compression:-While conventional production engines generally have a compression ratio of now more than 10.5 : 1, the compression ration onAudi's 3.2 FSI power unit is 12.5 : 1 - a record on production cars and the essential prerequisite for the new engine's high standard of efficiency.
Emission system Dual 3-way catalytic converters w/individual oxygen sensorsELECTRICAL SYSTEM:
Battery 12 volts 80 amp/hr
Alternator 14 volts 120 ampDRIVETRAIN:
Transmissions
6-speed automaticwith Tiptronic®
Type quattroAutomatic 6-speed w/ Tiptronic®
Gear ratios: 1st 3.665:1
2nd 1.999:13rd 1.407:14th 1.000:15th 0.742:1
6th -Final Drive 3.091:1
Front Differential Hypoid gear, electronically locking (EDL)Center Differential TORSEN® (TORque SENsing) differential providing
automatic and variable front to rear power proportioning
Rear Differential Hypoid gear, electronically locking (EDL)STEERING:
Type Maintenance-free rack-and-pinion steering with Servotronic electronic power assist
Ratio 16.3:1
Turns (lock-to-lock) n.a.
Turning circle (curb-to-curb) 36.4 ft. 11.1 mSUSPENSION:
Front Four-link front suspension, upper and lower wishbones, tubular anti-roll barRear Independent-wheel, trapezoidal-link rear suspension with resiliently mounted subframe, anti-roll bar
BRAKES:
Service brake Dual circuit brake system with diagonal split, Anti-lock Brake System (ABS), Electronic Brake pressure Distribution (EBD) and
Electronic Stabilization Program, upgraded version 8.0 (ESP) with brake disc wiping feature; tandem brake booster
Front, size and type 12.6 in. 320x30 mm - Ventilated disc / ContiTeves FNRG-60
Rear, size and type 11.3 in. 288x12 mm - Solid disc / TRW CII-41
Parking brake Mechanically actuated at the rear wheels
12
The all-new B7 Audi A43.2 Technical Specifications
Technical Specifications (continued) The all-new Audi A4 3.2 AvantWHEELS: Standard 17" (C1X)
Size 7.5J x 17
Offset 45 mmWeight 11,800 g / 26 lbsType Cast alloy
TIRES: Optional 17" (H8A performance) or (HG6 all-season) Size 235 / 45 C8F double-spoke wheelSpeed rating Y or H
Construction RadialLoad Index 94Brand / Type (all approved) Michelin Pilot Primacy (performance)
Conti Sport Contact 2 (performance)Pirelli P6 FourSeasons (all-seasons)
BODY:Material Unitized steel structure with integrated aluminum and magnesium componentsCorrosion protection All steel parts are 100% dual-side zinc-galvanized. (12-year limited warranty against corrosion perforation)
CAPACITIES:quattro
Engine oil 6.3 qt. 6 liter
Fuel tank 16.6 gal. 63 literCooling system 9.5 qt. 9 liter
EXTERIOR DIMENSIONS:quattro
Wheelbase 104.3 in. 2648 mmTrack: front / rear 59.9 in. 1522 mm / 59.9 in. 1522 mmOverall length 180.6 in. 4586 mmOverall width / with mirrors 69.8 in. 1772 mm / 76.3 in. 1937 mmHeight (unloaded) 56.2 in. 1427 mm
Ground clearance (loaded) 4.2 in. 106 mmCurb weight man. / auto. 3858 lbs. 1750 kgDistribution % front / rear 58 / 42 59 / 41Drag coefficient Cw = 0.31 Frontal Area = 2.18 sq. m.
INTERIOR DIMENSIONS (SAE measurements):Seating Capacity 5EPA class CompactHead room front / rear 38.4 in. 976 mm / 37.6 in. 956 mm w/sunroof front / rear 37.9 in. 962 mm / 37.2 in. 946 mm
Shoulder room front / rear 55.1 in. 1400 mm / 53.43 in. 1357 mm
Leg room front / rear 41.3 in. 1050 mm / 34.25 in. 870 mmInt. volume Sedan front / rear 50.7 cu. ft. 1436 liters / 39.4 cu. ft. 1116 litersLuggage Capacity Sedan 13.4 cu. ft. 380 liters 103.5 = total of cu. ft (including trunk volume)Int. Volume Avant front / rear 50.7 cu. ft. 1436 liters / 40.1 cu. ft. 1136 litersLuggage Capacity Avant 27.8 cu. ft. 787 liters 118.6 = total of cu. ft (including trunk volume)
PERFORMANCE:quattro
Automatic0-50 mph (0-80kmh) 5.0 sec.0-60 mph (0-100 km/h) 6.8 sec.
Top speed Top speed is electronically limited at 130 MPH (208 km/h)
FUEL ECONOMY: EPA estimatequattro
AutomaticCity 19 mpgHighway 26 mpgCombined 21 mpg
FUEL CONSUMPTION: Canadian EstimateAutomatic
City 12.6 liters/100kmHighway 8.2 liters/100km
12