Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
LIBERTYMACHINERY COMPANY
Fall 2003 Catalog
Agie Model 120 HSS “Agiecut”, 31” x 22” x 9.8” MaximumWork Piece, Agiematic CF20 Control, Auto Threading, MMD
Generator. #12518
Muratec Model MW-20/G Twin Spindle CNC 4-Axis Turning Machinewith Gantry Loader, Part Turnaround and Unloader, (2) 8” Chucks,Fanuc 16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration
System. #12487
75 Ton Minster Model 7SS“Die-Matic”, 5” Stroke, 17”Shut Height, 3-3/4” RamAdjustment, 45 SPM, 36” x24” Bed Area. #12289 3-1/2”, Pines, Model 2, Mandrel
Extractor, Dial-A-Bend, Pressure DieAssist. #11966
43” O-M Ltd. Omega60, Fanuc 18T, 12Position ATC, 59”
Swing, 75 HP, 600RPM, Coolant System,
#12817
New 1995
New 1974
New 1997
New 1986
New 1995
CHECK OUTOUR VIRTUAL
REALITYWAREHOUSE
TOUR!!Not Actual
Photo
Automatic Screw Machines•2” x 6 Spindle Acme Gridley, Model RB6, 6-CRS Slides, Int. Pocket Sld.,Universal Threading, Hinge Drill Hldr. Tooling, Chip Conveyor. #1844
2-5/8” x 8 Spindle Acme Gridley, Model RB8, 6-Slides, Air Pickoff,Backfinish, Universal Threading, Recessing, Reaming, Stock
Stand & Reel, Tooling. #1843
Benders, Pipe, Tube & Bar
•3-1/2”, Pines, Model 2, Mandrel Extractor, Pressure Die Assist.(New 1972) #11965
•3-1/2”, Pines, Model 2, Mandrel Extractor, Dial-A-Bend, Pressure DieAssist. (New 1974) #11966 SEE PHOTO ON FRONT COVER
Benders, Pipe, Tube & Bar, N/C & CNC
•2” Eaton Leonard Model VB 200 SE, 3-Axis, Premier Touch Screen.(New 1995-97) (3) #12763, #12764, #12765
Boring Mills, Horizontal, Table Type
Boring Mills, Horizontal, Table Type, N/C & CNC
5.12”, Toshiba Shibaura Model BPN13(P7), 4-Axis, X=150”, Y-86”,Z=58”, 20” Spindle Travel, Fanuc 6MB, Tool Changer. #2392
Boring Mills, Vertical
118”/216.5”, Toshiba ModelTSS30/55A, High Column,
Openside, 118” 4-Jaw, 216” Max.Swing, 109” Max. Under Rail,
Side Head, Tracer Attachment,In/MM Threading, D.R.O.#2387
1-1/4”, Conrac Model 110Synchrobend, Plane-A-BendCarriage, Mandrel Extractor,
Tooling. #12219
3/4" Pines Model ENC-020, MandrelExtractor, Retrofit with New Dimensions
CNC. #11981
2
New 1978
New 1975
Retrofit 1996New 1980
New 1986
5”, Cincinnati Gilbert, Model JT, 72”Vertical, 108” Cross, 96” Longitudinal, 60”x 120” Table, #50 CAT Taper, Power Draw
Bar, Digital Read Out. #1049
PRICED TO SELL!!
Surplus Machinery Sales Coordinators:Please add us to your bidders list!
We are cash buyers of your surplus machinery.
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
Brakes, Press, Hydraulic, Tons
225 Ton, American HerculesModel 225-12, 12’ Overall,
10’6” Between Housings, 36”Rear Operated Manual BackGauge, Flush Floor. #9269
Broaches, Vertical, Surface, Single Ram
4 Ton Broaching MachineSpecialties “Cruiser”, 24” Stroke,Hi-Speed, Allen Bradley PLC, Tilt
Table. #12564
Chucks•24” Rohm Model OW-404678-P5671, Power Draw Bar, 3-Jaw, AcmeSerrated. #1335
•15” Cushman Model 20 675 15 A11A, Combination 2-3 Jaw, SelfCentering Power Chuck, AM STD Serrated Master Jaws, Draw Tube.
•12” Logansport Model S53501, 3-Jaw Air Chuck, A5, Tongue andGroove.
•24” Weld Chuck, 3-Jaw, 4-1/2” Thru Hole, Manual, Tongue and Groove.
Die Handlers/Flippers
Broaches, Vertical, Tri-Way•4 Ton American Model TR4-24 Tri-Way, 24” Stroke, Updated Hydraulics& Electrics. (Rebuilt & Retrofit 1994) #10821
Drills•Allen Model VCDW, Single Spindle, 24” Throat, 3 HP, 50-1800 RPM, #4MT,21” x 46” Table, Back Geared, M.D. Coolant, Power Feed. (New 1972) #11792
2-Spindle 26” Leland GiffordModel 2LMS-26, 150-1800
RPM, #2MT, 25” x 48” Table,Back Geared, Coolant, Hand
Feed. #1064
3
New 1980
New 1989
135 Ton, Cincinnati Model 135AF10, 12’ Overall, 10’6” BetweenHousings, 3-Axis Back Gauge, Autocrown. #9892
New 1999
Boring Mills, Vertical, CNC•43” O-M Ltd. Omega 60, Fanuc 18T, 12 Position ATC, 59” Swing, 75 HP,600 RPM, Coolant System, (New 1995) #12817 SEE PHOTO ON FRONTCOVER
3,000 Lb. HansfordModel 1017, 55” x 24”
Platen Area, PowerElevation. #9668
Drills, Gun
Eldorado-Mega 3/4" x 30” Stroke, Model M75-1041 (30T)Ballscrew, DC Servo Drive, Mega F-18 Hi-Pressure Coolant
System, Tooling. #12833
New 1980
New 1986
New 1967
Not ActualPhoto
GREAT PRICE!
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
Micro-Hole, Billeter, .29mmMinimum Hole Size,
Graduated Angle Setting Slideand Offset Slide, Adjustable
Plane Workhead, ShuttleWorkpiece Slide, Optics,
Tooling. #9727
Drills, Radial•3’ x 9” Carlton Model OA, #4MT, 5 HP, Tapping, Box Table, T-Base. #746
4” x 13” Ikeda ModelRM1300, #5MT, 5 HP,
Tapping, Box Table,Coolant. #2416
4’ x FOOTBURT Jack KnifeType, #3MT, 2 HP,1140RPM, 1” Drill Capacity,Baldor Dynamic Brake,
Box Table. #9903
6’ x 19” Carlton Model4A, #6 MT, 40 HP, 10-1000 RPM, Tapping,Box Table, Coolant.
#12140
Electric Discharge Machines, N/C & CNC•Agie Model 120 HSS “Agiecut”, 31” x 22” x 9.8” Maximum Work Piece,Agiematic CF20 Control, Auto Threading, MMD Generator. (New 1995)#12518 SEE PHOTO ON FRONT COVER
Facing & Centering Machines
6” x 51” Hey, Model 3, Air Vises, 10 HP, 67-1430 RPM Spindle SpeedRange, Standard Feed Rates .001-.018 IPR, Automatic Work Cycling
Controls, Change Gears, Tooling. #2356
6-1/2” x 111” Hey Model 3, Air Vises, 15 HP, 81-1180 RPM SpindleSpeed Range, Standard Feed Rates .001 -.018 IPR, Automatic Work
Cycling Controls, Change Gears, Tooling. #11389
4
Drills, Multiple Spindle•21-Spindle Moline Model HD-68 “IN-LINE”, 40 HP, Rail Feed, #4 MT,Adjustable Spindles, Box of Gears & Spacers. #2462
•24-Spindle Natco Model G316B Head Feed, 2-Speed Neck, 15 HP,Jump & Step Drilling, Tapping, Many Spindles & Arms. (New 1980) #1414
•28-Spindle Deka Model HRG1222-28 Table Feed, 7.5 HP, Tapping,Many Spindles & Arms. (New 1966) #1396
Drilling & Tapping Machines, (Single Spindle)•28” Giddings & Lewis Bickford Model 978 Drilling Machine, 10 HP, #5MT, 75-1800 RPM, Power Feed, Spindle Reverse for Tapping. (New 1978) #708
Drills, Miscellaneous
New 1980
New 1986
New 1988
New 1976
New 1978
New 1981
GREAT PRICE
MAKE OFFER
!!
Gear Cutter Sharpeners
Barber Colman Model 6-5Automatic Hydraulic Hob
Sharpener and Form ReliefCutter Sharpener, (11) Index
Plates, Automatic Built inWheel Dresser. #9226
Gear Deburrers
(3) Redin Model 10, Deburrsand Chamfers Spur & Helical
Gears, Splines, Cams andSprockets, Auto Cycle, (3)Universal Spindles, Pratt
Burned 6” Air Self CenteringChuck, Allen Bradley SLC
500 Control, Cartridge TypeDust Collector, Portable.
#9745, #9746, #9747
Redin Model 18, Auto-Cycle,2-Universal Brush Type
Spindles, Dust Collector,Cycle Timer. #2326
Gear ShaperGear ShaperGear ShaperGear ShaperGear Shapersssss
Gear Testers
ITW Model 3424B-3C VariableInvolute Measurer, Extra Height72” c.c. and 24” Steady Rest 8”
Diameter Cap. Model 1606Rectilinear Recorder. HeidenhainDigital Base Circle Readout. #32
Grinders, Belt
37” AEM Model 37NB-HD, 20 HP, U.S. Vair-
Speed Drive, Tracking,Single Head, Dry Type.
#11967
Grinders, Center Hole
2” x 40” Klein Model ZSS1,10,000 RPM, Dressing
Spdl., Exc. Condition. #1014
5
New 1999
New 1993
Fellows Model 10-2,Straight Spur Guide, 10”Max. External & Internal,2” Face Width, Tailstock,Change Gears, Ultra-con
SCR Drive. #1304
New 1972
New 1981
New 1974
New 1985
Liquidation Services:Whether you want to sell one machine or a complete facility, we have the experience andability to convert your machinery into cash in a timely manner. Corporate Asset Disposal
Specialists. Call for References!
COMPLETELYREBUILT BY
BOURN & KOCH1994
LOW PRICE!
MAKEOFFER!
MAKEOFFER!
LOW
PRICE!
Grinders, Cylindrical Plain, Angle Head•10” x 30” Cincinnati Model 10L/30, Auto-Truing, Auto Dressing, Comp.Barnes Magnetic Sludge Separator. (New 1970) #2110
Grinders, Cylindrical Plain, Angle Head, N/C &CNC•14” x 40” Warner & Swasey “Stepmaster” Model ACC1440 SMA,Electro-Tru Dresser, 20 HP, 30” Wheel, Tooling, Barnes Coolant &Filtration System. (New 1980) #1288
•24”/14” x 60” Warner & Swasey “Stepmaster” Model ACC24/1460SMA, Electro-Tru Dresser, 20 HP, 30” Wheel, Factory Raised to Swing 24”,Loads of Tooling and Spare Parts. (New 1982) #1580
Grinders, Cylindrical-Universal
12” x 24” ChevalierModel GU-1124A,Plunge, Sparkout,
Tarry, Internal Spindle,Vari-Speed Workhead,
Wheel Balancer,Coolant FiltrationSystem, Tooling.
#2343
Grinders, Disc, Horizontal, Double End Opposed
No. DH6-30” Besly/Bendix (H6000), 60 HP, Oscillating Feed, Dresser,Motion Products Control, Servo Driven Incremental Feed, Face Cutting/
Plunge Feed, Sparkout, Coolant Filtration System. #2403
No. SDG6-42” Gardner,50 HP, Rotary Feed, HoldDown, Incremental Feed,
Stepmotor Driven,Sparkout, MotorizedDresser Arm, D.R.O.,
Independent Drag-OutCoolant Filtration System.
#12565
Grinders, Internal/Bore•No. 2CF-70 Heald, 8” Max. O.D. Cap., Hand Feed, Oscillator on Table,Bore Grinder,Truing, Autocycle. (New 1977) #1015 & #1016
No. 1209 Bryant, 9” Swing, 60,000 RPM High FrequencySpindle/Generator, Swivel Workhead, 6” Woodworth 8-Jaw
Chuck, Mist Collector, Exc. Cond. #1769
Grinders, Surface, Rotary Type, HorizontalSpindle
20” Favretto ModelMR50, 15 HP, 20”Electro Magnetic
Chuck with Neutrifier,Table Speeds 15-120
RPM, InfinitelyVariable, 33.58” Max.
Under Wheelhead,18” Cross Feed of
Wheelhead,Incremental
Downfeed, M.D.Coolant. #12528
Grinders, Surface, Rotary Type, Vertical Spindle
7-1/2” x 100 DegreeSwisher Model Mark V, 3 HP,
Electro Magnetic KidneyShaped Chuck, Internal
Motor Driven CoolantSystem. #10819
6
New 1996
New 1981
New 1980
New 1980
New 1987
New 1982
Please help update our mailing list by emailingaddress and contact changes to [email protected]
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
36” BlanchardModel 20D-36, 40HP, 20” CortlandWheelhead, 36”Magnetic Chuck,
Flow-Con Coolant.#9496, #12821
48” Blanchard Model26HD-48, 100 HP, 26”Cortland SegmentedGrinding Wheel, 56”
Swing, Hardened Ways.#11317
100” BlanchardModel 54-100, 150
HP, 34” CortlandSegmented
Grinding Wheel, 48”Under Wheel, 128”Swing, Hardened
Ways, PolyconCoolant. #9865
Grinders, Tool & Cutter
Cincinnati “Monoset”, MT,Motorized Workhead, Tilting, ½
HP, Tooth Rest Centering Gauge,Workhead Spindle Index
Mechanism. #9978
Hones, Abrasive Flow
Extrude Hone Model10/8 “Spectrum”, 10”
Media CylinderDiameter, 8” RamDiameter, Media
Chiller & Re-Feed,Table Indexing
Mechanism. #10606
•Extrude Hone Model 10/8 “Spectrum”, 10” Media Cylinder Diameter, 8”Ram Diameter, Media Chiller, Allen Bradley PLC. (New 1993) #10937
•Extrude Hone Model 8/6 “Vector”, 8” Media Cylinder Diameter, 6” RamDiameter, Media Chiller, Allen Bradley PLC. (New 1998) #10944, #12452
•Dynetics Model HS1000, 10” Media Cylinder Diameter, Re-FeedSystem, Chiller, Rotary Table. (New 1994) #11579
Dynetics Model HL20, 5”Media Cylinder Diameter,
Media TemperatureController. #11580
Extrude Hone Model 6/6 “Vector”, 6” MediaCylinder Diameter, 6”Ram Diameter, Allen
Bradley PLC, 149Hours!! #12650
7
New 1977
New 1973
New 1984
New 1971
New 1982
New 2000
New 1990
Not Actual Photo
WE HAVETWO!
Skiving & Burnishing Machine
Keyseaters
1-1/4” W. x 12” L. Mitts & Merrill Model K-1212, MircroprocessorController, Tooling. #2148
2-3/4” W. x 23-1/2” L.Fromag (Mitts & Merrill)Model 70E/425, CNC,
Electro-MechanicalDrives, Servo Driven
Rotary Table for Profiling,Tooling. #9749
Lapping Machines
24” P.R. HoffmanModel 2300, DoubleSided Lapping, Vari-
Speed Top PlateDrive Slurry System.
#10563, #10564
48” Peter Wolters ModelAC1200, “MICROLINE”Double Sided Polisher,
Full Face Wheel,Siemens SUS-U-115Programmable Logic
Controller. #2279
Lathes, Combination, N/C & CNC
Mori Seiki Model AL-22ATM Two Axis, 18.9” Swing x 21.65”C.C., 2” Spindle Bore, Collet System, LNS Hydrobar Feed,
Programmable Tailstock, Fanuc MF-T4 Control, PartsCatcher, 8” Chuck, Tool Holders. #12517
8
New 1983
Sierra Skiving & BurnishingMachine, 8-1/2” Boring
Capacity, 151” Z-Travel, LargeQuantity of Tooling. #12647
New 1987
New 1994
New 1993
New 1992
New 1991
We are cash buyers of good used metal working and fabricating machinery.Please fax or email your surplus list and we will respond promptly!
Not Actual Photo
RARE FIND!
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
Lathes, Combination, N/C & CNC, 3-Axis or More
Muratec Model MW-12/G Twin Spindle CNC 4-Axis Turning Machinewith Ganty Loader, Part Turnaround and Unloader, (2) 6” Chucks,Fanuc 16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration
System. #12486
•Muratec Model MW-20/G Twin Spindle CNC 4-Axis Turning Machinewith Gantry Loader, Part Turnaround and Unloader, (2) 8” Chucks, Fanuc16TTA Control, (2) Tool Setters, Tool Shift, Coolant Filtration System.(New 1997) #12487 SEE PHOTO ON FRONT COVER
Lathes, Engine
Machining Centers, Vertical, N/C & CNC•Chiron Model DZ18 W-Magnum “Twin Spindle” Vertical Machining Center,X-15.7”, Y-15.7”, Z-24.8”, (2) Position NC Rotary Table with Hydraulic Clamping,Fanuc O-M Control, 10,500 RPM Spindle, Rigid Tapping, Thru-SpindleCoolant, (2) x 24 Pos ATC, ISO 40 Taper, Barnes Coolant Filtration System.(New 1996) #12497, #12498 SEE PHOTO ON REAR COVER
Milling Machines, Production, Duplex•Kearney & Trecker Model 1536B, 15” x 58” Table, 36” Travel, 22-900RPM, Autocycle, 20 HP, #50NST. (New 1981) #1065
Toyoda Model FH-60 Twin Pallet CNC Horizontal Machining Center, X-39”, Y-31”, Z-29”, (2) 24.8” Pallets, .001 Degree Index, 48 Pos ATC,CAT 50 Taper, 25 HP Spindle, Thru-Spindle Coolant, Barnes Coolant
and Filtration System. #12561-#12563
Machining Centers, Horizontal, N/C & CNC
Lathes, Turret, Saddle Type
No. 5A, Warner & Swasey, 32” Power Chuck and PowerChuckwrench, 9-3/4” Spindle Bore, Cross Sliding Turret, Full Length
Threading, Taper Attach on Front Carriage, 75 HP, MiscellaneousTooling. #10976
26” x 72” cc, LeBlond Regal Servo Shift, 18” Swing Over Cross Slide,Threading, 15” Chuck, 2-Axis Digital Readout, Tooling. #10462
20” x 54” Lodge & Shipley Model 2013 AVS, 13” Swing Over CrossSlide, Inch Threading, Taper Attachment, Chucks, Steady Rest,
Chip Pan Base. #1216
18” x 150” American Style “B” Heavy Duty, 11” SwingOver Cross Slides, 20 HP, Taper Attachment, InchThreading, Steady Rest, Chucks, Tooling. #2419
9
New 1996
New 1972
New 1969
New 1970
New 1993
New 1976
RARE FIND
MAKE OFFER!
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
Milling Machines, Production, Simplex
Kent Owens Model2-20 Rise & Fall,12” x 42” Table,
5 HP, No. 40 NST,20” Travel, Change
Gears. #11181
Cincinnati Series 215-153, Quill Retraction,
15” x 63” Table,36” Travel, 15 HP,#50 NST. #1639
•Kent-Owens Model 2-20, 12” x 42” Table, SMC Model ECC50Programmable Logic Controller, Proximity Switches, Change Gears,Overarm, Arbors and Arbor Support. (New 1977) #2266
Millers, Thread
12” x 72” Lees Bradner Model HTA, Hydraulic In-Out MeteredActuation, Internal Attachment. #10820
Milling Machines, Universal•WMW Heckert Model 4 Type FSS/400S, 15 HP, 16” x 63” Table, 44”Table Travel, Universal Swivel Head, Auto Rise & Fall, 45-2240 RPM, 3-AxisAutomatic Machining Cycles, 2-Axis Simultaneously. (New 1993) #1171
Milling Machines, Vertical
OKK Model MH4V,20 HP, 22-1400 RPM,18” x 79” Table, 43”
Table Travel, #50 NST,Maximum Nose to Table
24”, Coolant, PowerDraw Bar. #1835
66 Ton Komatsu ModelOBS60-2, 4.7” Stroke,
16.9” Shut Height, 45-85SPM, 35” x 22” Bed.
#12478
Nichols Model 12PMC Rise and Fall, 9” x 36” Table, No. 40 NST, 18”Ball Screw Servo Feed Table Travel, Overarm and Support, Coolant
System. #11197
10
New 1970
New 1977
New 1976
New 1985
New 1970
New 1978
ANOTHERRARE
FIND!
DO YOUPAINT?
•Bridgeport Series II, 4 HP, 50-3500 RPM, 11” x 58” Table, 30” TableTravel, Power Feeds, Quill Feed. (New 1974). #1825
Mills, Attritor•Union Process Model Type B, Size 1S, Attritor. #2325
Miscellaneous MachineryMINIMIZE DISPOSAL COSTS NOW!•Compacting Technologies, Model CTI PRO 8560 Paint Filter Compactor,55 Gallon Capacity, hazardous Waste Compaction Set-up for Paint Filters.(New 1991) #11763
Presses, Die Cutting•60” x 20” Samco, 35 Ton, 2 Post, 3 HP with Sliding Table. #550
Presses, Gap Frame, Single Crank
88 Ton Komatsu ModelOBS80-3BM, 5.1” Stroke,19.25” Shut Height, 37-75 SPM, 39” x 24” Bed.
#12479
121 Ton KomatsuModel OBS110-3, 5.9”
Stroke, 18.9” ShutHeight, 32-65 SPM,
43” x 28” Bed.#12480
Presses, High Speed Production
45 Ton Bruderer Model BSTA 40/45,4-Post, .5”-2.25” Stroke, 11.56” ShutHeight, 70-1200 SPM, 26” x 21” Bed,
Hydrostatic Vari-Speed Drive, BBVFeed. #2320, #2321, #2322, #2323,
#2324
25 Ton V & O Model SS2-25-26 Partsmaster, 1-1/4”Stroke, 7-1/4" Shut Height,
0-600 SPM, 26"x20"Bolster. #12663
150 Ton Pacific Model150PF “Press-Former”, 12”
Stroke, 10” Shut Height, 22”DLO, 24” x 48” Bed Area,Dual Ram Speed, 30 HP.
#11390
110 Ton Cincinnati Model 110OBS Gap, 10” Stroke, 16”
DLO, 42” x 27” Bed, Cushion,Quick Die Change, CNC
Controller, ProgrammableKnock-Out, 8-Point Gibbing,588 IPM Advance, 60 IPMPressing, 608 IPM Return.
#2358
50 Ton P & H, 2-Post , 4” Stroke,16” DLO, 26” x 20” Bed Area,
Operation, 314 IPM Advance, 37IPM Press, 282 IPM Return, Non-Rotating Ram Guide, Electric Foot
Switch. #9753
11
117 Ton Neff Model H-100-50M,4-Post, 10” Stroke, 15” DLO, 60”
x 22” Between Posts, 50 HPHydraulic System, PLC Controls.
#12834
New 1989
New 1992
New 1971
New 1997
New 1981
New 1976
New 1992
New 1991
All machines promoted in this brochure can be inspected under power in our warehouse, or at our respective MDNA partners’ facility.
Rental and Leasing Options Available.
FIVE IN STOCK!
JUST PURCHASED!
Presses, Hydraulic•6 Ton Denison Model WR06, 12” Stroke, 16” DLO, 18” x 12” Bed Area,Dual Lever, Inching. (New 1976) #2155
•8 Ton Denison Multipress Model WR80HC, 12” Stroke, 16” DLO, 21”Diameter 6-Position Rotary Index Table, Dual Palm Controls. (New 1991)#12835, #12836
Presses, Hydraulic, Platen
30 Ton Tox-Pressotechnik ModelS30.30-70-6, C-Frame,
Removable Two-Station RotaryTable, Variable Tonnage Control,
Removable Heated Platen.#10639
Presses Hydraulic, Straightening
60 Ton Eitel Model RP60,17.7” Stroke, 36.6” DLO, 77” x10-3/4” Bed Area, Eitel WR 3
Shaft StraighteningAttachment. #9751
100 Ton Eitel ModelRP100, 18” Stroke, 38”DLO, 55” x 10-1/2” Bed
Area, Eitel WR2/100Shaft StraighteningAttachment. #9752
Presses, O.B.I, Back Geared, Single Crank
25 Ton V & O Model25ST,Back Geared 5”
Stroke, 9-1/2” Shut Height,80 SPM, 24” x 13-1/2” Bed
Area, Rotary Dial Table.#9728
75 Ton Minster Model 7, 4”Stroke, 21” Shut Height, 75-
150 SPM, 36” x 24” BedArea, Littell #4-8.5 Single
Roll Feed. #9245
60 Ton Bliss Model C60, 4”Stroke, 14.25” Shut Height, 3”
Ram Adjustment, 90 SPM, 36” x24” Bed Area. #12290
•5 Ton Minster Model 7SS “Die-Matic”, 5” Stroke, 17” ShutHeight, 3-3/4” Ram Adjustment, 45 SPM, 36” x 24” Bed Area.(New 1986) #12289 SEE PHOTO ON FRONT COVER
Presses, O.B.I., Flywheel, Single Crank
60 Ton Rousselle Model6A, 3” Stroke, 12-1/2”
Shut Height, 3-1/2” RamAdjustment, 110 SPM, 16”
x 10” Bed Area. #12291
12
New 1982New 1970
New 1994
New 1980
New 1974
New 1985
Heard of Any Plant Closures or Facilities Downsizing?Finder’s Fees Paid for Successful Leads! $$$$$$$$
New 1980
“BRAND NEW,NEVER USED”
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
•1/4" x 12’ Cincinnati “Century” Model 2H12, Hydraulic, 36” FrontOperated Power Back Gauge, Power Rake Adjustment, 96” Squaring Arm.(New 1985) #11818 SEE PHOTO ON REAR COVER
Reels, Centering
20000 Lb. Littell, Model 200-36 Coil Reel, 36” Width,60” O.D., 15-17-1/2” I.D., Hydraulic Exp., Power
Threading, Traveling Coil Car. #1996
Roll Formers
10 Stand Lockformer, 2” Spindle Diameter, 24” Roll Space, 12” c.c.,Chain Driven, Variable Speed, Outboard Supports. #9271
Saws, Band, Vertical•26” DoAll Model 26-3, 32” x 41” Table, 16” Table Stroke, 13” UnderGuide, Hydraulic Tilt Table, Vari-Speed, Shear/Weld/Grind. #1213
36” DoAll Model ZW-3620 “ZEPHYR”, 36” x
30” Tilt Table, 17” TableStroke, 20” Under Guide,Tilt Table, Vari-Speed 85to 15,000 FPM. #11982
Saws, Cold & Carbide
36” Kaltenbach ModelHDM 910, 11.8”
Rounds, 9.9” Squares.Nesting. Somerset
Production AutomatedFeed System with
Gauging & Discharge/Unloading System, Exc.
Cond. #676
Shears, Power Squaring
1/4" x 10’ Cincinnati Model 1810, 36” Front Operated Power BackGauge, Power Rake Adjustment, 10’ Squaring Arm. #10871
1” x 16’ Pacific Model #750HD16, Hydraulic, 60” Front Operated PowerBack Gauge, Power Rake Adjustment, 16’ Squaring Arm, Brand New
Knives Still in Box. #1055
13
New 1977
New 1972
New 1968
New 1970
New 1982
New 1984 PRICED TO SELL TODAY!
707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380
E-mail : [email protected]
•30” Round Lucas, Air Lift, 90° Shot Pin, 360° Vernier, 8,500 Lb. Cap.(New 1983). #958
•36” x 36” Lucas, Air Lift, 90° Shot Pin, 360° Vernier, 15,000 Lb. Cap.(New 1974). #959
•50” x 50” Portage, Air Lift, 90° Deg. 14” High. #1098
3-1/2” Capacity VaillModel 7S, Single Stroke,
21 Tons, 15” FormingStroke. #12201
3"Capacity ConracModel 3CP-HD, Tube
and Pipe Flaring,Deburring, Beading,
Pneumatic Clamping .#12671
3” Capacity Pines Model 662Tube End Finisher, HydraulicClamping, PLC, Foot Treadle.
#11182
Tube Machinery•2” Capacity Parker Model P232, Pneumatic Vise, Tooling, PortableCabinet Base. #12202
Transfer Machines, Rotary, Trunion
Kaufman Model KMC3311/6, 6 Station, 1-1/
16 Thread Size, 20Threads, 1-3/8 Hex, 4
Heads. #10805
Straighteners, Flat & Shape•8” x .062” Littell Model 308-5PDL, 8-1/2” Width, 2-1/4” Diameter, 5Hardened Rolls, 20-100 FPM. #9246
Angle Plates•(2) 48” W x 72” H x 36” Deep Angle Plates, T-Slotted on 6” c.c. #2428
Tables, Air Lift Rotary
Tables, Floor & Layout Plates•(2) Floor Plates 60” x 120” x 9-1/2” Thick, Cast Iron, T-Slotted, Keyed/Matched Set. #2029
•(2) Portage 50” x 70” Slotted Layout Plates on Adjustable Stands.(New 1974) #2027
•(3) 72” x 204” x 11” Giddings & Lewis, T-Slotted Floor Plates,Fabricated, Matched. (New 1965) #9869, #9870, #9871
•(2) 48” x 144” x 14” Giddings & Lewis Floor Plates, Cast Iron, T-Slotted, Keyed/Matched. (New 1965) #9794, #9875
Testers, Hardness•New Age Industries Model AT130RDS Versitron Rockwell, 8” DiameterAnvil Table, Digital System, Auto-Program. (New 1989) #11196
Thread Rollers•5/8” Lian Feng Model LF-15 Hydraulic Thread Roller, Infeed, Workrest,Tooling. (New 1974) #2153
26” x 26” DeVlieg, Air Lift,90° Index, with Fine Adjust,
5,000 Lb. Cap. #1059
96” x 144” Gray Cross Sliding Hydra-Static RotaryTable, 35 Ton Capacity, 48” Infeed Stroke, 16 Pos.
Index Points. #9864
14
New 1970
New 1965
New 1978,
Completely
Rebuilt by
Kaufman 1989
New 1978
New 1983
New 1979
NEW Extended Warranty Program Now Available!!!
DON’T SEE WHAT YOUARE LOOKING FOR??
Try our Machinery Locating Services:While we can’t “ALWAYS” have in
stock what you are looking for, we canlocate any machine you require. Wewill provide photographs, qualify the
physical condition, and makearrangements for your inspection
under power. GIVE US A TRY, YOUWILL BE HAPPY THAT YOU DID!
Wire Machinery, Spring Coilers
BHS/Torin ModelW-11A Spring
Maker, .015” to.072” Wire
Diameter, AllenBradley PLC
Control, MoyerWire Feeder.
#12504
Welding Positioners
2,000 Lb. AronsonModel SHD20A-PTVR2,
Power Tilt & Rotate, Vari-Speed. #9145
50,000 Lb. Aronson Model GE-500, Geared Elevation, Power Rotate,Vari-Speed Rotation, 60” Diameter Table, Pendant. #2423
20,000 Lb. Ransome Model 5HS/5TS Headstock & Tailstock, Vari-Speed Headstock, Power Travel Base Tailstock. #1923
6,000 Lb. Aronson ModelHD60A, Power Tilt &Rotate, Vari-Speed.
#12366
•3,000 Lb. Pandjiris Model 30-6, Power Tilt & Rotate, Vari-Speed.(New 1986) #12366
15
New 1982
New 1977
New 1993
New 1975
New 1989
Liberty Machinery is pleased to announce our new extended warranty program covering used machinery. This inexpensivewarranty provides you with bottom-line protection if a mechanical or electrical breakdown occurs within the first year. Thisvaluable assurance covers parts and labor and is underwritten by the Hartford Steam Boiler Inspections and InsuranceCompany, a leading breakdown insurer. Call us for complete details.
Have confidence in what you buy with our new extended warranty program!!
•18,000 Lb. Aronson Model HD180R, Power Tilt & Rotate, Vari-Speed.
JUST PURCHASED!
LIBERTYMACHINERY COMPANY
LIBERY MACHINERY COMPANY707 Skokie Blvd., Suite 100 • Northbrook, IL 60062Phone (847) 509-9379 • Fax: (847) 509-9380E-mail : [email protected]
PRESORTEDSTANDARD MAIL
U.S.POSTAGE PAIDLITTLE ROCK, ARPERMIT NO. 1884
Check out our Interactive Warehouse Tour at:www.libertymachinery.com
Chiron Model DZ18 W-Magnum “Twin Spindle” VerticalMachining Center, X-15.7”, Y-15.7”, Z-24.8”, (2) Position NCRotary Table with Hydraulic Clamping, Fanuc O-M Control,10,500 RPM Spindle, Rigid Tapping, Thru-Spindle Coolant,(2) x 24 Pos ATC, ISO 40 Taper, Barnes Coolant Filtration
System. #12497, #12498
1/4" x 12’ Cincinnati “Century” Model 2H12, Hydraulic, 36”Front Operated Power Back Gauge, Power Rake
Adjustment, 78” Squaring Arm, Support Arms. #11818
New 1996
New 1985
TWO INSTOCK!