2-DAY EQUIPMENT & TOOL AUCTION

Saturday, April 4 @ 9:30 AM (Preview: Friday, April 3 from 5:00 to 7:00 pm.)

Owners: Custom Designers & Builders (Phone # 226-5050)

Location: 1459 Interstate Loop, Bismarck, ND (Located just south of U-Haul or north or Grand Theaters,

parking on the north side of the building)

Auctioneers Note: Chris is retiring and offering the remaining equipment, tools, & inventory from Custom Designers & Builders at auction. The tools and equipment are industrial quality and well maintained. Large construction equipment (trucks, Pettibone, Bobcat, trailer, etc) will be sold at 1:00 pm, Saturday, April 4. Seating will be limited so you may want to bring a chair or stool. This is a 2-day sale and both days will be full! Be sure to look at the sale bill for the Sunday, April 5th auction. There are many duplicate items and many of the duplicate items will be sold both days (duplicates marked with *).

CONSTRUCTION EQUIPMENT

(Some of the big equipment items are subject to prior sale. If not sold by March 31, they will be offered at the auction. Call Greg at 226-5050 to make sure they will be at the auction or for more details

regarding any item – These items will sell at 1:00 pm.)

• BOBCAT A300 All-Wheel/SkidSteer Loader, 73hp Turbo Diesel, Sound Cab w/ AC & Heater, 33-15.5 x 16.5 Turf Tires, Keyless Start, Power Bob Tach, Rear Auxiliary Hydraulics, Gold Package, Less than 200 Hours, Attachments include: Bobcat 811 Backhoe w/ 20” bucket, Fork Lift Attachment (Quick Tach), Quick Tach Rear Stabilizers; 80” Lo Profile Bucket; Sold as a Package

• 2003 Felling FT14 Tilt Bed Hydraulic Trailer w/ 16’ Tilt bed &

6’Stationary Deck, 2-7000# Axles, Weight Distribution & Sway Control Hitch

• Shop Made 8’ x 24” Trailer w Beaver Tail & Ramps, Pin Hitch

(sorry, this item has been sold and will not be offered at the auction)

• Pettibone Super 6 Cary Lift, 33 ½’ Lifting Height, 18,000#

Capacity, Diesel, 4-Wheel Drive & Steer, Oblique Steer, Sway Cylinder, New Batteries, 1107 Hours, Job-Site Ready!!

• 2002 Chevy 2500HD Pickup: Reg. Cab, LS, 4x4, 8.1L V8, Auto, 5-Speed Allison Transmission, 373 Rear End, 31,000 miles, Ladder Rack, Tool Boxes, Very Clean and Well Cared For, Sharp!

• 1988 Grumman Olson Kurbmaster 16’ Step Van, Chevy C30 1

Ton Chassis, 350 Fuel Injected Engine, Automatic, Well Maintained, 91,000 Miles, Set up for construction w/ 110v wiring, fluorescent lights, shelves, drawers

• 1964 Chevy C-60- 2 Ton Dump Truck, 292 6 Cylinder, 4-Speed w

2 Speed Axle, Swinging Endgate, Tool Storage Box, Saddle Tank, Ladder Carrier, Custom Box Steps, & HD Pin Hitch

• 3 Forklift Work Platforms:

� 4’x14’, OSHA Approved with Tool Baskets, Toe Boards, and Tie-Offs

� 4’x7’, OSHA Approved with Tool Baskets, Toe Boards, and Tie-Offs

� 4’x8’ (Star Industries) , OSHA Approved with Toe Boards, and Tie-Offs

�

TOOLS

• DEWALT 12” Sliding Double Compound Saw

• BOSCH 24v-3 pc. Cordless Work Set: Drill/Driver, Circular Saw, Worklight, 2 Batteries & Chargers

• CRAFTSMAN: � Laser Trac 12” Compound Miter Saw � 6” Jointer w/ Dustbox � 10” Table Saw (1 hp)w 40” Cast Iron Top & 20” Extensions � 12” Wood & Metal Band Saw on Stand � Portable Job Site 10” Table Saw w/ Stand � Grinder on Stand � 6” Belt/Disc Sander on Stand � 15½” HD Drill Press w/ Stand & Extras

� 3 Professional Routers* � Router Table � Work Boxes � 5 Rolling Stand Platforms* � 3½ Ton Floor Jack � Compressed Air Pressure Washer � 2½ Gallon Paint Tank, Hose, & Gun

• HITACHI 12” Thickness Planer/Jointer

• MILWAUKEE: � HD Sawzall 6527 (8 amp) � HD Hole Hawg (7.5 amp)

• MAKITA: � 18v Cordless Tool Pac inc. Sawzall, Circular Saw,

Drill/Driver; Saber Saw, Blower, Worklight, 3 Batteries, Charger, & Case

� 9401 4” x 24” Belt Sander � 14.4v Drill/Driver w Worklight, 2 Batteries, & Charger � 14” Metal Chop Saw

• AIR COMPRESSORS:

� Emglo 240v Twin Cylinder Job Site 3hp Compressor � Craftsman HD 240v 6.5hp, 33 Gallon Twin Compressor (like

new) � Dewalt D55151 Portable Compressor � Craftsman 150 psi 3hp, 4 Gallon Portable Compressor

• NAILERS & STAPLERS:

� Bostich N80C Coil Framing Nailer � 2 Hitachi NV45AB 1¾” Coil Roofing Nailers* � Bostitch N60FN-2 Angled 15 ga. Finish Nailer � Bostitch 18 ga Brad Nailer � 2 Bostitch T50S4 16 ga. ½” Crown Stapler*

• PAINT SPRAYERS:

� Graco SuperNova 700 Airless � Wagner 770 Paint Crew

• Delta Combo Sander

• Dayton 4W113 HD 7500 Watt 120-240v HD Generator w/ B&S

18hp Twin II 18 Engine, Elec. Start, Only Used Once (subject to prior sale)

• Campbell Hausfeld Semi Trash Pump w/ 4hp Honda Engine

(used 1 time)

• Remington 170T High Performance Kerosene/Diesel Heater

• BLACK & DECKER: � 12” Industrial Compound Miter Saw � Industrial HD ¾ HP Rotary Hammer SBD � 2 - 8¼” SawCat Insdustrial Circular Saws* � 2 Drywall Screw Guns* � Hand Router � WorkMate Portable Benches

• 2 Skilsaw Professional 7¼” Worm Gear Drive Circular Saws*

• Sioux 3/8” Angled Electric Drill/Driver

• SCAFFOLD:

� 7-Sections of 5’ Scaffold � 2 Sections of 6½’ Walk-Through Scaffold � 2 Sets of Scaffold Wheels � 1 Set of Levelers � Expandable Scaffold Platforms � 4’ Fold-Up Rolling Portable Scaffold

• Nice Selection of Step Ladders (3-2’; 3-6’, 1-8’; 1-10’, mostly

fiberglass)

• Several Extension Ladders (12-40’)

• Ladder Stabilizer & Levelers

• RotoLazer Rotary Level

• 4 Iron Horse Stationary Tool Stands*

• Rousseau Miter Saw Stand on Wheels

• Panel Saw & Router Bench, 3 Pc. Saw Guide

• 2-8’ Metal Work Benches with Wood Tops

• Skil Bench Grinder

• Sharpened Saw Blades*

• Conduit Benders

• Air Hoses*

• Stanley Portable Work Table/Sawhorse*

• Lots of Nails, Screws, Bolts, Hardware*

• Log Chains, Binders, HD Slings, Ropes*

• Dust Collection Hoses, Control Gates

• Rolls of Electrical Wire (including low voltage)*

• Cable & Electrical Devices*

• Wire Spool Racks* (2 Metal Spool Racks, 1 Multi-Spool Rack, 1 Portable Multi-Spool Rack)

• Assorted Fasteners for Air Tools, Nails, Staples*

• Pickup Tool Box

North Star Auction & Appraisal Company Auctioneer: Dean Moos, Lic. #622, Clerk Lic. #450, (701)667-2935

Rich Fadness, Lic. #563, George Schatz, Lic. #389

• Terms: Cash or good check. All statements made the day of the sale take precedence over any

printed ads. Not responsible for accidents. Other terms announced the day of the sale. Lunch

will be available.