12

2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with
Page 2: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

2 CONTENTS

Battery Replacement Program WOW Mop Components Carton Contents Assembly Instructions for Use Operation Tips Troubleshooting Safety Instructions & Technical Parameters

3 4 5 6 7 9 10 12

Easy to use, powerful and

eco-friendly! You will love your new

WOW Mop!

Page 3: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

3 BATTERY REPLACEMENT PROGRAM

Base Battery ReplacementBatteries don’t last forever. For the sake of our planet, check out our battery replacement program at nelliesclean.com/our-planet.

Notes: •Do not try to replace the battery yourself. •Overcharging the battery may cause damage. •Please avoid charging for more than 3 hours.

Page 4: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

54 WOW MOP COMPONENTS

Spray Button

Decorative Casing

Power Button

Handle

Base

Nozzle

Reservoir

Pad Attach (Shadowed Area)

Page 5: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

5 CARTON CONTENTS

Measuring Cup

Charging Cord User Manual

WOW Wet Floor Pads

Page 6: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

6 ASSEMBLY

Cleaning Pads

Press down the lock catch to make the aluminum pipe connect with the handle and decorative casing.

Press down the lock catch and insert the installed tube into the hole of the base.

Place the cleaning pads on the ground, lift the machine and place on the cleaning pads.

Decorative Casing

Base

Page 7: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

7 INSTRUCTIONS FOR USE

Power ON/OFFPull back the handle. After hearing a clicking sound, the headlamp and power indicator will light up. Bring handle to 90 degrees to turn off.

Note: The machine will automatically turn into “sleep mode” after 2 minutes of no use and the full battery light will twinkle.

Adding Cleaning SolutionOpen the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap.

Best used with Nellie’s Floor Care on hardwood, ceramic and tile.

Note: Maximum capacity of the reservoir is 230mL.

OperatingPress the power button on the handle to make the cleaning pads oscillate, and press it again to stop.

While the pads are oscillating, hold down the spray button to spray cleaning solution. Release button to stop.

Notes:•Do not operate while the mop is charging.•The longest time of spraying is 5 seconds with one press.

Spray Button

Power Button

Reservoir

Page 8: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

98

Battery LightsThree battery lights will show the status of the battery. 100%, 65% and 30%. 3 lights will flash when the machine is low in battery indicating to charge immediately.

Notes: • 3 lights on 100% • 2 lights on 65% • 1 light on 30% • 3 lights flashing low battery

First Time ChargingPull out the rubber cork and turn it until the whole charging port is revealed. Plug the charger into the charging port.

Note: Use the original equipment manufactured adapter.

Pad ChangingUnplug/turn off the machine. Ensure that the tank is empty. Hold the mop upside down and remove the pads from the bottom.

Charging Port

Page 9: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

9 OPERATION TIPS

Turning OffPut handle in upright position to turn off.

Cleaning PadsMachine wash pads with fragrance-free detergent. Do not use fabric softener. FYI Nellie’s Laundry Soda works great!

Replacing the Handle BatteryThere are two screws located underneath the top of the handle. Remove the screws and the teal panel. Replace the battery.

The WOW Mop requires a 23A/12V battery.

Page 10: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

10 TROUBLESHOOTING

Fault

Unit is wobbling.

Reduced spray or no spray.

Power button does not turn on the machine.

Cause

1. Mop pads are not installed properly.

1. Reservoir may be empty. 2. System isn’t completely primed.

3. Spray nozzle on base is clogged.

1. Handle is standing upright.

Treatment

1. Turn power OFF and follow instructions on page 8 for replacing mop pads.

1. Refill reservoir.

2. Hold spray button for 10 to 15 seconds to make sure the solution has flowed to the spray nozzle. 3. Turn power OFF. Use a pin to clean the spray nozzle located at the front of the machine.

1. Recline handle.

Page 11: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

11

Fault

No power.

Machine is leaking.

Lights are on but unit won’t start vibrating.

Cause

1. Battery depleted.

2. Charging cord damaged. 3. Battery failure.

1. Cap of reservoir is not closed properly.

1. The battery in the handle is depleted.

Treatment

1. Charge battery for approximately 3 hours. Avoid overcharging. 2. Do not use. Contact Nellie’s customer service.

3. Do not use. Contact Nellie’s customer service.

1. Close the cap properly.

1. Follow instructions on page 9 to replace the battery in the handle.

Page 12: 2 CONTENTS · 2019-10-18 · Adding Cleaning Solution Open the cap of the reservoir and fill using the measuring cup to add liquid. Do not overfill. Close the cap. Best used with

12 SAFETY INSTRUCTIONS & TECHNICAL PARAMETERS

UsageFor home use only.

Remove large particles or substances from the floor before using. This product is not for sweeping or vacuuming.

In case of jam caused by small objects, power off before removing the objects.

Do not let children use the mop as a toy.

Use a rag to clean the mop when it’s powered off.

Do not leave any solution in the reservoir for more than 24 hours.

Battery & ChargingDo not use charger and charging batteries provided by any third parties.

Do not self disassemble or remodel the battery and charger.

Keep the charger away from heating sources such as radiators.

Do not touch the charger with wet cloths or wet hand.

Please send the used batteries for recycling by certified organizations or learn more about our Battery Replacement Program at www.nelliesclean.com/our-planet.

If there is any damage to the cable please stop using and contact Nellie’s customer service.

Name Parameters

Battery 2000 mAh Voltage Rating 12 V Rated Power 35 W Power Charger Voltage 12.6 V Charging Time 3 - 5 h Run Time 55 min

114–2455 Dollarton Highway, North Vancouver, BC, Canada V7H 0A2 nelliesclean.com