Upload
mitchell-carpenter
View
224
Download
1
Tags:
Embed Size (px)
Citation preview
2
Wireless Three Dimensional Microwave Holographic Input Device
(3DMI-HOPE)
A. Prof. Hala Abdel-monem Elsadek Microstrip Department Head, Electronics Research Institute
Institute /Company: Electronics Research Institute lDecember 2011
4
Presentation Guidelines Technology Description Team Status Markets and Market Interest Competition Development Status Intellectual Property IP Status Risks and Barriers Team Status
5
Technology Description
Electromagnetic Novel 3D input system (3DMI-HOPE) that allows users to intuitively specify three-dimensional (3D) coordinates in space and save it in digital memory.◦ Building a 3D input pointer that allows the reconstruction of 3D image in space
The proposed device utilized an electromagnetic technology(microwave holography) for recording the image in high accuracy without any assistive tools.
3D graphics hardware and rendering systems capable of offering applications in truly 3D interactive.
What is the technology?
Design and manufacture of the laboratory prototype of a microwave 3D input device that is capable of capture 3D coordinates of points in the reconstruction space and save it in digital memory.
Investigate, design, analyze, fabricate and measurement of new shapes of compact smart MIMO antenna array hologram recording process.
Design and test the real time reconstruction of a recorded object hologram for real time applications.
Design and test the innovative 3DMI-HOPE editing accuracy at standards operational frequencies of communications at Bluetooth ISM band and 802.11b WLAN standard.
6
What does the technology do?
September 9, 2010
Technology Applications The applications for a 3D input device ranges over the:
◦ non-immersive VR systems as in new user interface, web browsers, computer-aided design and manufacture,
◦ computer simulation, ◦ tele-robotics,◦ aerospace,◦ education and training, ◦ scientific data visualization, and◦ medical industry.
This output 3D MI-HOPE prototype will have impact on different fields of science as mainly in:◦ telemedicine and tele-robotics where entering, storing, sending and
manipulating 3D data information with proper accuracy rendering important assistance.
7
Development Status1. 3D MI-HOPE is a verified Concept only
System sub-components are in rough prototypes but not integrated together:2. MIMO smart microstrip antenna array system3. System hardware construction4. Software/hardware of ray-tracing reconstruction
Project development status5. System integration (system hardware and software) chip6. Laboratory prototype (packaging), Testing and comparison with simulated
results7. Re-engineering and calibration procedures for proper accuracy and
Industrial prototype suggestion.8
9
3D graphic program to represent the intensity
of position (x,y,z) of the VI
) Object( point location
in space (x,y,z)
)or multipoint separated by(
Microwave image generation
Reconstruction of virtual image of
the object
Antenna array size operating frequency
Antenna inter-element distance
Object image
data)amp+p
hase(
Reconstruction volume = Cube of side equal to
antenna size
Virtual Image
) VI(
operating frequency
) a(
Overview of system stages in Block diagram (b) Output of each stage
)b(
2D presentation for VI 3D presentation for VI One point hologram Object
)
Technology Description
11
)CPU & monitor(
3D graphic facility to
draw 3D object
point by point (10)
RS232/D
Object Signal
Working Volume
Object scattered
modulated signal
) 6(
Operator’s hand switch (3)
User hand unit(1)
Modulated scattering diode (2)
MxM Array of microstrip
antenna (5)
Computer interface unit (7)
Data
Acquisition system
Panel unit (6)
Illuminating unit
3 orthogonal dipole antennas (4)
Software driver (reconstruction
algorithm built on ray tracing)
) 8(
Hardware driver (special purpose
machine for reconstruction
) 9(
OR
Holo3D pointer Card (11)
Digital interfaceADC
3DMI-HOPE editing system in sub-component level
It consists of 3 orthogonal dipole antennas modulating diode at low frequency (1kHz) power supply feed (battery) mechanical switch
Wireless user hand unit
It consists of It consists of MxM receiving multiple input-multiple
output (MIMO) microstrip antenna array, strip lines feed
Pointer’s pad plate unit
It consists of AD8302 as an amplitude and phase detector The IC ADC0808 acts as an Analog to Digital Converter The ADC converters are the coordinate identification The (ECL10164) acts a 1x8 multiplexers Atmel AT89X52 microcontroller that can be connected to
the PC computer via the RS232 protocol.
The panel unit
Intellectual Property IP Status The 3D MI-HOPE is reserved by National patent
No. EPO 24614, date:16-Feb. 2010 And PCT application No. EPO 24616
int.CIG06F3/00 ERI is the owner of the patent Project PI is the inventor Contract between PI and ERI for marketing rights
(50%) each
19
Risks and Barriers Unavailability of some RF electronic components in
local market. (importing-Computek, Re-design system using all components in local market)
Problems in system components (Sub-systems)integration (re-engineering)
High noise levels received from reflections from normal surrounding obstacles in reconstruction space (filtering procedures)
Budget flow to purchase the required component, material and supplies in scheduled timing.
20