2" SINGLE CHECK VALVE W/ COMPRESSION FITTING = END OF PBCWUD SYSTEM
AutoCAD SHX Text
BRASS FLANGE W/ COMPRESSION FITTING TO ACCOMMODATE 2" PVC PIPE & 1 " OR 2" METER FLANGE12" OR 2" METER FLANGE
AutoCAD SHX Text
DOUBLE STRAP SADDLE W/ 2" CORP. STOP AND COMPRESSION FITTING
AutoCAD SHX Text
90° BEND
AutoCAD SHX Text
1 "-2" ABOVE FINISHED GRADE IN 12"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
AutoCAD SHX Text
APPROVED METER BOX W/ MOUSEHOLES & OFFSET METER READER LID (PERMANENTLY INFUSED PURPLE COLOR WITH LID MARKED "RECLAIMED WATER DO NOT DRINK")
AutoCAD SHX Text
1 " OR 2" TURBO METER (BY DEPARTMENT) 12" OR 2" TURBO METER (BY DEPARTMENT) 1 " METER: A=13 "; 2" METER: A=17 "12" METER: A=13 "; 2" METER: A=17 "14"; 2" METER: A=17 "14"
AutoCAD SHX Text
CUSTOMER SERVICE LINE
AutoCAD SHX Text
12" FROM R/W LINE, EDGE OF SIDEWALK, EDGE OF PAVEMENT, BACK OF CURB
AutoCAD SHX Text
12"±12"
AutoCAD SHX Text
BY CONTRACTOR OR DEPARTMENT (SEE NOTES 10 & 11)
AutoCAD SHX Text
BY DEVELOPER (SEE NOTES 10 & 11)
AutoCAD SHX Text
2" LOCKABLE CONTROL BALL VALVE = PRESSURE TEST LIMIT
AutoCAD SHX Text
LONG SERVICES (SEE NOTE #3)
AutoCAD SHX Text
(TYP.)
AutoCAD SHX Text
A
AutoCAD SHX Text
10" MIN. - 12" MAX.
AutoCAD SHX Text
MIN. 10"
AutoCAD SHX Text
6"
AutoCAD SHX Text
MAX. 12"
AutoCAD SHX Text
12" STUBOUT W/ TEMPORARY PLUG
AutoCAD SHX Text
PIPING, VALVES, AND BOX LID TO BE PERMANENTLY IDENTIFIED AS "RECLAIMED WATER SYSTEM" COMPONENT. PVC FITTINGS SHALL BE SCHEDULE 80. 12" MINIMUM CLEARANCE TO BE MAINTAINED BETWEEN METER BOX AND ANY OBSTRUCTION. FOR INSTALLATION OF SERVICES UNDER DRIVEWAYS AND ROADWAYS, USE MINIMUM 4" PVC SCH. 40 OR HDPE SDR 9 PURPLECASING. CASING TO EXTEND MINIMUM 24" BEYOND EDGE OF PAVEMENT. END OF CASING TO BE SEALED WITH CEMENT. SUCCESSIVE TAPS INTO THE WATER MAIN SHALL BE SPACED A MINIMUM OF 18" APART. TAPS SPACED BETWEEN 18" AND 48" SHALL BE OFFSET TO EACH SIDE OF THE MAIN. TAPS ON THE SAME SIDE OF A PVC PIPE SECTION SHALL BE 10' APART. METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. SERVICE LINES AND TAPS SHALL NOT BE PLACED UNDER DRIVEWAYS WHENEVER POSSIBLE. A CHECK VALVE IS REQUIRED FOR ALL RECLAIMED WATER SERVICES. THE MAXIMUM SERVICE LENGTH IS 100' TO METER. BEDDING (MIN. 4") AND COVER (MIN. 4") OVER SERVICE LINE OR CASING SHALL CONSIST OF FINE GRANULAR MATERIAL. UNSUITABLE IN-SITU MATERIALS SUCH AS MUCK, DEBRIS, AND LARGER ROCKS SHALL BE REMOVED WITH 2" MAXIMUM SIZE. METER SERVICE WILL NOT BE INSTALLED UNTIL: A.FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK ARE IN PLACE OR DRIVEWAY OR SIDEWALK IS IN PLACE. FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK ARE IN PLACE OR DRIVEWAY OR SIDEWALK IS IN PLACE. B."MINIMUM UNOBSTRUCTED SPACE" (AS SHOWN) IS PROVIDED. MINIMUM 12" VERTICAL SEPARATION IS REQUIRED TO OTHER "MINIMUM UNOBSTRUCTED SPACE" (AS SHOWN) IS PROVIDED. MINIMUM 12" VERTICAL SEPARATION IS REQUIRED TO OTHER UTILITIES. METER SHALL BE INSTALLED BY THE DEPARTMENT. THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT. CONTRACTOR SHALL CONSTRUCT SERVICE COMPONENTS FOR THE METER TO BE INSTALLED "TRUE" AND "PLUMB" AND TO ALLOW METER READING THROUGH THE METER READER LID. ALL HARDWARE FOR FLANGED CONNECTIONS (BOLTS, ETC.) TO BE STAINLESS STEEL. THREADED AREAS OF CORPORATION STOP AND OTHER FITTINGS SHALL BE SPIRAL WRAPPED WITH TWO (2) WRAPS OF TEFLON TAPE. THE PRESSURE CONTROL VALVE (PCV) SHALL BE PRIVATE FOR SERVICE WITH "DIRECT" CONNECTION TO THE IRRIGATION SYSTEM. SEE SEPARATE DETAILS FOR "LAKE DISCHARGE" CONNECTION. A TIMER AND/OR REMOTE TELEMETRY UNIT MAY BE REQUIRED TO REGULATE THE AVAILABILITY OF RECLAIMED WATER FOR EACH SERVICE CONNECTION.
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
9.
AutoCAD SHX Text
8.
AutoCAD SHX Text
4.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
13.
AutoCAD SHX Text
12.
AutoCAD SHX Text
15.
AutoCAD SHX Text
14.
AutoCAD SHX Text
2" LOCKING CURB STOP W/ COMPRESSION FITTINGS
AutoCAD SHX Text
REQUIRED PRESSURE CONTROL VALVE (PCV) WITH STRAINER (2" MAX. SEE NOTE #15)
AutoCAD SHX Text
16.
AutoCAD SHX Text
(2) 4" BOLLARDS PAINTED PURPLE (MAX. 24" HIGH)
AutoCAD SHX Text
12"
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
12" MIN.
AutoCAD SHX Text
18"
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
R/W LINE FOR ROADS, BACK OF CURB/SIDEWALK OR EDGE OF DRIVEWAY FOR OTHERS
AutoCAD SHX Text
EDGE OF UTILITY EASEMENT
AutoCAD SHX Text
LIMIT OF MINIMUM UNOBSTRUCTED SPACE
AutoCAD SHX Text
COMPRESSION FITTING
AutoCAD SHX Text
2" CORP. STOP
AutoCAD SHX Text
2" PVC SCH. 40 PIPE
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
12"
AutoCAD SHX Text
GRASS AREA
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
BRASS RECOMMENDED
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED GALVANIZED UNISTRUTS. BOLLARDS MAY BE REQUIRED
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
RECLAIMED WATER SINGLE 1 1/2" & 2" METER DETAIL (DIRECT SERVICE)
AutoCAD SHX Text
RECLAIMED WATER 3" METER SERVICE DETAIL (DIRECT SERVICE)
AutoCAD SHX Text
RECLAIMED WATER 4" METER SERVICE DETAIL (DIRECT SERVICE)
AutoCAD SHX Text
RECLAIMED WATER 6" METER SERVICE DETAIL (DIRECT SERVICE)
AutoCAD SHX Text
RECLAIMED WATER MAIN TYPICAL FLUSHING HYDRANT INSTALLATION
AutoCAD SHX Text
8"
AutoCAD SHX Text
OPERATING NUT
AutoCAD SHX Text
C.I. ADJUSTABLE VALVE BOX
AutoCAD SHX Text
(INSIDE SCREW TYPE)
AutoCAD SHX Text
TOP OF PAVEMENT
AutoCAD SHX Text
CONCRETE COLLAR (POURED IN PLACE)
AutoCAD SHX Text
POUR CONCRETE TO GRADE
AutoCAD SHX Text
IN SODDED AREAS.
AutoCAD SHX Text
APPROVED RESTRAINED
AutoCAD SHX Text
36" MIN.
AutoCAD SHX Text
8"
AutoCAD SHX Text
24"
AutoCAD SHX Text
24"
AutoCAD SHX Text
8"
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
4.
AutoCAD SHX Text
5.
AutoCAD SHX Text
CUTTING-IN SLEEVE
AutoCAD SHX Text
MECHANICAL JOINT VALVE
AutoCAD SHX Text
2"
AutoCAD SHX Text
CAST IRON VALVE BOX WITH SQUARE COVER MARKED "RECLAIMED WATER" (TAGGED)
AutoCAD SHX Text
6.
AutoCAD SHX Text
(SEE NOTE 6.)
AutoCAD SHX Text
20" MIN. OR AS DIRECTED BY WUD DEPARTMENT (SEE NOTE 2.)
AutoCAD SHX Text
7.
AutoCAD SHX Text
8.
AutoCAD SHX Text
CONCRETE COLLAR IS NOT REQUIRED IN PAVED AREAS IF PAVEMENT SURFACE IS FINISHED PRIOR TO CONDITIONAL FINAL INSPECTION. WHEN OPERATING NUT IS DEEPER THAN 36" A ONE PIECE EXTENSION WILL BE REQUIRED TO BRING OPERATING NUT 20"-30" BELOW FINISHED GRADE. EXTENSION BOLTS & NUTS ARE TO BE STAINLESS STEEL. A HIGH STRENGTH STEEL CENTERING PLATE, WELDED TO THE EXTENSION, IS ALSO REQUIRED. VALVE BOXES SHALL HAVE SQUARE COVERS MARKED "RECLAIMED WATER". EXTENSION VALVE BOX TO BE D.I.P. OR C-900 PVC DR 18 (COLOR: PURPLE). A CUT-IN INSTALLATION SHALL REQUIRE MEGALUGS OR EQUAL THROUGHOUT ASSEMBLY. IN ORDER TO MAINTAIN ADEQUATE COVER OVER VALVE NUT, THE FOLLOWING MINIMUM COVERS OVER PIPE ARE REQUIRED: GATE VALVE SIZE MIN. COVER OVER PIPE MIN. COVER OVER PIPE MIN. COVER OVER PIPE 16"48" 48" 20"54" 54" 24"60" 60" 30"72" 72" PIPE SHALL BE RESTRAINED ON BOTH SIDES OF THE VALVE AS REQUIRED. VALVES IN ROADWAYS SHALL BE LOCATED OUTSIDE OF WHEEL PATHS.
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
RECLAIMED WATER MAIN TYPICAL GATE VALVE SETTING AND MAIN CUT-IN DETAIL
AutoCAD SHX Text
CONCRETE COLLAR (POURED IN PLACE)
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
8"
AutoCAD SHX Text
36" MIN. COVER
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
%%UA-A
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
RESTRAINED MECHANICAL JOINT
AutoCAD SHX Text
BUTTERFLY VALVE
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
CAST IRON VALVE BOX
AutoCAD SHX Text
WITH A SQUARE COVER
AutoCAD SHX Text
24" SQ.
AutoCAD SHX Text
2"
AutoCAD SHX Text
PAVEMENT
AutoCAD SHX Text
OPERATING
AutoCAD SHX Text
NUT
AutoCAD SHX Text
OPERATING
AutoCAD SHX Text
NUT
AutoCAD SHX Text
MARKED "RECLAIMED WATER"
AutoCAD SHX Text
4.
AutoCAD SHX Text
5.
AutoCAD SHX Text
6.
AutoCAD SHX Text
7.
AutoCAD SHX Text
CONCRETE COLLAR IS NOT REQUIRED IN PAVED AREAS IF PAVEMENT SURFACE IS FINISHED PRIOR TO CONDITIONAL FINAL INSPECTION. WHEN TOP OF OPERATING NUT IS DEEPER THAN 36" AN EXTENSION WILL BE REQUIRED TO BRING OPERATING NUT 24"-30" BELOW FINISHED GRADE. EXTENSION BOLTS & NUTS ARE TO BE STAINLESS STEEL. A HIGH STRENGTH STEEL CENTERING PLATE, WELDED TO THE EXTENSION, IS ALSO REQUIRED. VALVE BOXES SHALL HAVE SQUARE COVER MARKED "RECLAIMED WATER". A CUT-IN INSTALLATION SHALL REQUIRE MEGALUGS OR EQUAL THROUGHOUT ASSEMBLY. EXTENSION VALVE BOX TO BE D.I.P. OR C-900 PVC DR 18 (COLOR: PURPLE). PIPE SHALL BE RESTRAINED ON BOTH SIDES OF THE VALVE AS REQUIRED. VALVES IN ROADWAYS SHALL BE LOCATED OUTSIDE OF WHEEL PATHS.
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
RECLAIMED WATER MAIN TYPICAL BUTTERFLY VALVE SETTING
AutoCAD SHX Text
RECLAIMED WATER MAIN CASING INSTALLATION DETAILS
AutoCAD SHX Text
7R
AutoCAD SHX Text
36" MIN.
AutoCAD SHX Text
15"
AutoCAD SHX Text
COVER
AutoCAD SHX Text
EXACT
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
BY CONTRACTOR (SEE NOTE 7 & 8)
AutoCAD SHX Text
BY DEVELOPER
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
18"
AutoCAD SHX Text
MIN. 4" (TYP.)
AutoCAD SHX Text
6" TURBO METER
AutoCAD SHX Text
6" TURBO METER WITH STRAINER
AutoCAD SHX Text
8" DIP
AutoCAD SHX Text
METER BOX
AutoCAD SHX Text
(BY DEPARTMENT)
AutoCAD SHX Text
TEST LIMITS
AutoCAD SHX Text
PRESSURE
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
GATE VALVE WITH BOX
AutoCAD SHX Text
36"
AutoCAD SHX Text
36"
AutoCAD SHX Text
OF CURB OR EDGE OF DRIVEWAY. (TYP.)
AutoCAD SHX Text
R/W LINE FOR BACK OF SIDEWALK, ROADS, BACK
AutoCAD SHX Text
GRASS
AutoCAD SHX Text
AREA
AutoCAD SHX Text
36"
AutoCAD SHX Text
M.J. FITTINGS
AutoCAD SHX Text
FLANGED FITTINGS
AutoCAD SHX Text
MIN. 40"
AutoCAD SHX Text
12"
AutoCAD SHX Text
MIN. 8" DIP
AutoCAD SHX Text
MAX. 48"
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
(IF APPLICABLE)
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
12"
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
8" SWING FLEX CHECK VALVE
AutoCAD SHX Text
END OF PBCWUD OWNERSHIP AND MAINTENANCE RESPONSIBILITY FOR "DIRECT" CONNECTION SYSTEMS
AutoCAD SHX Text
OFF-SET READER LID
AutoCAD SHX Text
8" SWING FLEX CHECK VALVE
AutoCAD SHX Text
MIN. 24" MAX. 32"
AutoCAD SHX Text
ALL SERVICE PIPING SHALL BE DUCTILE IRON. APPROVED METER BOX LID TO BE PERMANENTLY INFUSED PURPLE COLOR OR PAINTED PURPLE AND MARKED "RECLAIMED WATER - DO NOT DRINK". ALL FITTINGS SHALL BE MECHANICAL JOINT OR FLANGED WITH MEGALUGS OR EQUAL. PIPING AND VALVES TO BE IDENTIFIED (TAGGED) AS RECLAIMED WATER SYSTEM COMPONENTS. METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. METER SERVICE WILL NOT BE INSTALLED UNTIL: A) FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK ARE IN PLACE OR DRIVEWAY OR SIDEWALK IS IN PLACE. B) "MINIMUM UNOBSTRUCTED SPACE" (AS SHOWN) IS PROVIDED. MINIMUM 12" VERTICAL SEPARATION IS REQUIRED TO OTHER UTILITIES. METER SHALL BE INSTALLED BY THE DEPARTMENT. THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT. CONTRACTOR SHALL CONSTRUCT SERVICE COMPONENTS FOR THE METER TO BE INSTALLED "TRUE" AND "PLUMB" AND TO ALLOW METER READING THROUGH THE METER READER LID. ALL HARDWARE FOR FLANGED CONNECTIONS (BOLTS, ETC.) TO BE STAINLESS STEEL. CHECK VALVE TO BE FREE OF OBSTRUCTION FOR PROPER OPERATION. A GATE VALVE WITH BOX IS TO BE LOCATED WITHIN 5 FEET OF THE METER BOX. THE PRESSURE CONTROL VALVE (PCV) SHALL BE PRIVATE FOR SERVICE WITH "DIRECT" CONNECTION TO THE IRRIGATION SYSTEM. SEE SEPARATE DETAILS FOR "LAKE DISCHARGE" CONNECTION. A TIMER AND/OR REMOTE TELEMETRY UNIT MAY BE REQUIRED TO REGULATE THE AVAILABILITY OF RECLAIMED WATER FOR EACH SERVICE CONNECTION.
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
9.
AutoCAD SHX Text
8.
AutoCAD SHX Text
4.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
13.
AutoCAD SHX Text
12.
AutoCAD SHX Text
14.
AutoCAD SHX Text
%%UPLAN%%U
AutoCAD SHX Text
%%USECTION%%U
AutoCAD SHX Text
TOP OF PAVED AREA
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
WITH BOX
AutoCAD SHX Text
(SEE NOTE #12)
AutoCAD SHX Text
6"
AutoCAD SHX Text
6"
AutoCAD SHX Text
APPROVED METER BOX
AutoCAD SHX Text
WITH MOUSEHOLES AND
AutoCAD SHX Text
OFFSET METER READER LID
AutoCAD SHX Text
8" X 6" REDUCER
AutoCAD SHX Text
5' MAX.
AutoCAD SHX Text
27 "38"
AutoCAD SHX Text
1 "-2" ABOVE 12"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
AutoCAD SHX Text
6" PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
(2) 8"x6" REDUCER
AutoCAD SHX Text
RESTRAINED FLANGE ADAPTER (TYP.)
AutoCAD SHX Text
8" DIP
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED UNISTRUTS (GALVANIZED)
AutoCAD SHX Text
(2) 4" BOLLARDS PAINTED PURPLE (MAX. 24" HIGH)
AutoCAD SHX Text
REQUIRED PRESSURE CONTROL VALVE (PCV) W/ STRAINER (6" MAX. SEE NOTE #13)
AutoCAD SHX Text
(2) 8"x6" REDUCER
AutoCAD SHX Text
4" THICK CONCRETE SUPPORT PAD (RECOMMENDED)
AutoCAD SHX Text
LIMIT OF MINIMUM UNOBSTRUCTED SPACE
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
36"
AutoCAD SHX Text
8" GATE VALVE WITH BOX & CONCRETE COLLAR (TYP.)
AutoCAD SHX Text
3/4" WASHED ROCK UNDER METER BOX
AutoCAD SHX Text
FILTER CLOTH
AutoCAD SHX Text
8" DIP
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
36" MIN.
AutoCAD SHX Text
15"
AutoCAD SHX Text
COVER
AutoCAD SHX Text
EXACT
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
BY CONTRACTOR (SEE NOTE 7 & 8)
AutoCAD SHX Text
BY DEVELOPER
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
18"
AutoCAD SHX Text
MIN. 5" (TYP.)
AutoCAD SHX Text
3" TURBO METER
AutoCAD SHX Text
3" TURBO METER WITH STRAINER
AutoCAD SHX Text
4" DIP
AutoCAD SHX Text
METER BOX
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
(BY DEPARTMENT)
AutoCAD SHX Text
19 1/4"
AutoCAD SHX Text
TEST LIMITS
AutoCAD SHX Text
PRESSURE
AutoCAD SHX Text
36"
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
GATE VALVE WITH BOX
AutoCAD SHX Text
36"
AutoCAD SHX Text
36"
AutoCAD SHX Text
OF CURB OR EDGE OF DRIVEWAY. (TYP.)
AutoCAD SHX Text
R/W LINE FOR BACK OF SIDEWALK, ROADS, BACK
AutoCAD SHX Text
GRASS
AutoCAD SHX Text
AREA
AutoCAD SHX Text
4" X 3" REDUCER
AutoCAD SHX Text
36"
AutoCAD SHX Text
M.J. FITTINGS
AutoCAD SHX Text
FLANGED FITTINGS
AutoCAD SHX Text
MIN. 20"
AutoCAD SHX Text
12"
AutoCAD SHX Text
6"
AutoCAD SHX Text
APPROVED METER BOX
AutoCAD SHX Text
WITH MOUSEHOLES AND
AutoCAD SHX Text
OFFSET METER READER LID.
AutoCAD SHX Text
MIN. 4" DIP
AutoCAD SHX Text
MAX. 24"
AutoCAD SHX Text
6"
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
(IF APPLICABLE)
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
WITH BOX
AutoCAD SHX Text
(SEE NOTE #12)
AutoCAD SHX Text
4" GATE VALVE WITH BOX & CONCRETE COLLAR (TYP.)
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
(2) 4" BOLLARDS PAINTED PURPLE (MAX. 24" HIGH)
AutoCAD SHX Text
REQUIRED 3" PRESSURE CONTROL VALVE (PCV) W/ STRAINER (SEE NOTE #13)
AutoCAD SHX Text
12"
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
4" SWING FLEX CHECK VALVE
AutoCAD SHX Text
(2) 4"x3" REDUCER
AutoCAD SHX Text
END OF PBCWUD OWNERSHIP AND MAINTENANCE RESPONSIBILITY FOR "DIRECT" CONNECTION SYSTEMS
AutoCAD SHX Text
OFF-SET READER LID
AutoCAD SHX Text
1 "-2" ABOVE 12"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
AutoCAD SHX Text
3" PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
(2) 4"x3" REDUCER
AutoCAD SHX Text
RESTRAINED FLANGE ADAPTER (TYP.)
AutoCAD SHX Text
4" DIP
AutoCAD SHX Text
3/4" WASHED ROCK UNDER METER BOX
AutoCAD SHX Text
FILTER CLOTH
AutoCAD SHX Text
MIN. 12" MAX. 16"
AutoCAD SHX Text
ALL SERVICE PIPING SHALL BE DUCTILE IRON. APPROVED METER BOX LID TO BE PERMANENTLY INFUSED PURPLE COLOR OR PAINTED PURPLE AND MARKED "RECLAIMED WATER - DO NOT DRINK". ALL FITTINGS SHALL BE MECHANICAL JOINT OR FLANGED WITH MEGALUGS OR EQUAL. PIPING AND VALVES TO BE IDENTIFIED (TAGGED) AS RECLAIMED WATER SYSTEM COMPONENTS. METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. METER SERVICE WILL NOT BE INSTALLED UNTIL: A) FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK ARE IN PLACE OR DRIVEWAY OR SIDEWALK IS IN PLACE. B) "MINIMUM UNOBSTRUCTED SPACE" (AS SHOWN) IS PROVIDED. MINIMUM 12" VERTICAL SEPARATION IS REQUIRED TO OTHER UTILITIES. METER SHALL BE INSTALLED BY THE DEPARTMENT. THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT. CONTRACTOR SHALL CONSTRUCT SERVICE COMPONENTS FOR THE METER TO BE INSTALLED "TRUE" AND "PLUMB" AND TO ALLOW METER READING THROUGH THE METER READER LID. ALL HARDWARE FOR FLANGED CONNECTIONS (BOLTS, ETC.) TO BE STAINLESS STEEL. CHECK VALVE TO BE FREE OF OBSTRUCTION FOR PROPER OPERATION. A GATE VALVE WITH BOX IS TO BE LOCATED WITHIN 5 FEET OF THE METER BOX. THE PRESSURE CONTROL VALVE (PCV) SHALL BE PRIVATE FOR SERVICE WITH "DIRECT" CONNECTION TO THE IRRIGATION SYSTEM. SEE SEPARATE DETAILS FOR "LAKE DISCHARGE" CONNECTION. A TIMER AND/OR REMOTE TELEMETRY UNIT MAY BE REQUIRED TO REGULATE THE AVAILABILITY OF RECLAIMED WATER FOR EACH SERVICE CONNECTION.
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
9.
AutoCAD SHX Text
8.
AutoCAD SHX Text
4.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
13.
AutoCAD SHX Text
12.
AutoCAD SHX Text
14.
AutoCAD SHX Text
%%UPLAN%%U
AutoCAD SHX Text
%%USECTION%%U
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED UNISTRUTS (GALVANIZED)
AutoCAD SHX Text
4" DIP
AutoCAD SHX Text
4" THICK CONCRETE SUPPORT PAD (RECOMMENDED)
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
LIMIT OF MINIMUM UNOBSTRUCTED SPACE
AutoCAD SHX Text
4" SWING FLEX CHECK VALVE
AutoCAD SHX Text
36" MIN.
AutoCAD SHX Text
15"
AutoCAD SHX Text
COVER
AutoCAD SHX Text
EXACT
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
BY CONTRACTOR (SEE NOTE 7 & 8)
AutoCAD SHX Text
BY DEVELOPER
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
18"
AutoCAD SHX Text
MIN. 4" (TYP.)
AutoCAD SHX Text
4" TURBO METER
AutoCAD SHX Text
4" TURBO METER WITH STRAINER
AutoCAD SHX Text
6" DIP
AutoCAD SHX Text
METER BOX
AutoCAD SHX Text
(BY DEPARTMENT)
AutoCAD SHX Text
TEST LIMITS
AutoCAD SHX Text
PRESSURE
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
GATE VALVE WITH BOX
AutoCAD SHX Text
36"
AutoCAD SHX Text
36"
AutoCAD SHX Text
OF CURB OR EDGE OF DRIVEWAY. (TYP.)
AutoCAD SHX Text
R/W LINE FOR BACK OF SIDEWALK, ROADS, BACK
AutoCAD SHX Text
GRASS
AutoCAD SHX Text
AREA
AutoCAD SHX Text
36"
AutoCAD SHX Text
M.J. FITTINGS
AutoCAD SHX Text
FLANGED FITTINGS
AutoCAD SHX Text
MIN. 30"
AutoCAD SHX Text
12"
AutoCAD SHX Text
6"
AutoCAD SHX Text
APPROVED METER BOX
AutoCAD SHX Text
WITH MOUSEHOLES AND
AutoCAD SHX Text
OFFSET METER READER LID
AutoCAD SHX Text
MIN. 6" DIP
AutoCAD SHX Text
MAX. 36"
AutoCAD SHX Text
6"
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
(IF APPLICABLE)
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
WITH BOX
AutoCAD SHX Text
(SEE NOTE #12)
AutoCAD SHX Text
12"
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
6" SWING FLEX CHECK VALVE
AutoCAD SHX Text
END OF PBCWUD OWNERSHIP AND MAINTENANCE RESPONSIBILITY FOR "DIRECT" CONNECTION SYSTEMS
AutoCAD SHX Text
OFF-SET READER LID
AutoCAD SHX Text
6" SWING FLEX CHECK VALVE
AutoCAD SHX Text
MIN. 18" MAX. 24"
AutoCAD SHX Text
ALL SERVICE PIPING SHALL BE DUCTILE IRON. APPROVED METER BOX LID TO BE PERMANENTLY INFUSED PURPLE COLOR OR PAINTED PURPLE AND MARKED "RECLAIMED WATER - DO NOT DRINK". ALL FITTINGS SHALL BE MECHANICAL JOINT OR FLANGED WITH MEGALUGS OR EQUAL. PIPING AND VALVES TO BE IDENTIFIED (TAGGED) AS RECLAIMED WATER SYSTEM COMPONENTS. METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. METER SERVICE WILL NOT BE INSTALLED UNTIL: A) FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK ARE IN PLACE OR DRIVEWAY OR SIDEWALK IS IN PLACE. B) "MINIMUM UNOBSTRUCTED SPACE" (AS SHOWN) IS PROVIDED. MINIMUM 12" VERTICAL SEPARATION IS REQUIRED TO OTHER UTILITIES. METER SHALL BE INSTALLED BY THE DEPARTMENT. THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT. CONTRACTOR SHALL CONSTRUCT SERVICE COMPONENTS FOR THE METER TO BE INSTALLED "TRUE" AND "PLUMB" AND TO ALLOW METER READING THROUGH THE METER READER LID. ALL HARDWARE FOR FLANGED CONNECTIONS (BOLTS, ETC.) TO BE STAINLESS STEEL. CHECK VALVE TO BE FREE OF OBSTRUCTION FOR PROPER OPERATION. A GATE VALVE WITH BOX IS TO BE LOCATED WITHIN 5 FEET OF THE METER BOX. THE PRESSURE CONTROL VALVE (PCV) SHALL BE PRIVATE FOR SERVICE WITH "DIRECT" CONNECTION TO THE IRRIGATION SYSTEM. SEE SEPARATE DETAILS FOR "LAKE DISCHARGE" CONNECTION. A TIMER AND/OR REMOTE TELEMETRY UNIT MAY BE REQUIRED TO REGULATE THE AVAILABILITY OF RECLAIMED WATER FOR EACH SERVICE CONNECTION.
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
3.
AutoCAD SHX Text
9.
AutoCAD SHX Text
8.
AutoCAD SHX Text
4.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
13.
AutoCAD SHX Text
12.
AutoCAD SHX Text
14.
AutoCAD SHX Text
%%UPLAN%%U
AutoCAD SHX Text
%%USECTION%%U
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
TOP OF PAVED AREA
AutoCAD SHX Text
6" X 4" REDUCER
AutoCAD SHX Text
23 "14"
AutoCAD SHX Text
1 "-2" ABOVE 12"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
AutoCAD SHX Text
4" MAX. PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
(2) 6"x4" REDUCER
AutoCAD SHX Text
RESTRAINED FLANGE ADAPTER (TYP.)
AutoCAD SHX Text
6" DIP
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED UNISTRUTS (GALVANIZED)
AutoCAD SHX Text
(2) 4" BOLLARDS PAINTED PURPLE (MAX. 24" HIGH)
AutoCAD SHX Text
REQUIRED PRESSURE CONTROL VALVE (PCV) W/ STRAINER (4" MAX. SEE NOTE #13)
AutoCAD SHX Text
(2) 6"x4" REDUCER
AutoCAD SHX Text
4" THICK CONCRETE SUPPORT PAD (RECOMMENDED)
AutoCAD SHX Text
LIMIT OF MINIMUM UNOBSTRUCTED SPACE
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
6" GATE VALVE WITH BOX & CONCRETE COLLAR (TYP.)
AutoCAD SHX Text
3/4" WASHED ROCK UNDER METER BOX
AutoCAD SHX Text
FILTER CLOTH
AutoCAD SHX Text
6" DIP
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
36"
AutoCAD SHX Text
RECLAIMED WATER DUAL 5/8" X 3/4" METER SERVICE DETAIL
AutoCAD SHX Text
RECLAIMED WATER SINGLE 5/8" X 3/4" OR 1" METER SERVICE DETAIL
AutoCAD SHX Text
6" GATE VALVE
AutoCAD SHX Text
(SEE DETAIL 8R)
AutoCAD SHX Text
VALVE SETTING
AutoCAD SHX Text
36"
AutoCAD SHX Text
3" D.I.P. (MJ)
AutoCAD SHX Text
GRADE
AutoCAD SHX Text
FINISHED
AutoCAD SHX Text
SURFACE
AutoCAD SHX Text
GROUND OR PAVEMENT
AutoCAD SHX Text
VARIES (SEE NOTE 9)
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
8.
AutoCAD SHX Text
7.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
4.
AutoCAD SHX Text
3.
AutoCAD SHX Text
2.
AutoCAD SHX Text
1.
AutoCAD SHX Text
6"x3" REDUCER
AutoCAD SHX Text
NOZZLE TO FACE ROADWAY.
AutoCAD SHX Text
PIPING, VALVES, AND HYDRANTS TO BE IDENTIFIED (TAGGED) AS RECLAIMED WATER SYSTEM COMPONENTS.
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
18"MIN.
AutoCAD SHX Text
24"MAX.
AutoCAD SHX Text
MIN. 2 1/8"
AutoCAD SHX Text
MAIN VALVE
AutoCAD SHX Text
OPENING
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
MEGALUGS OR APPROVED
AutoCAD SHX Text
MEGALUGS OR EQUAL
AutoCAD SHX Text
MEGALUGS OR APPROVED EQUAL (TYP.)
AutoCAD SHX Text
EQUAL (TYP.)
AutoCAD SHX Text
3'x3'x5" CONCRETE COLLAR
AutoCAD SHX Text
ALL BURIED HYDRANT HARDWARE SHALL BE STAINLESS STEEL 304.
AutoCAD SHX Text
2-1/2" NOZZLE (SEE NOTE 6)
AutoCAD SHX Text
R/W LINE FOR ROADS OR BACK OF CURB/SIDEWALK FOR OTHERS
AutoCAD SHX Text
MECHANICAL JOINT TEE OR TAPPING SLEEVE, BRANCH SIZE SHALL BE 6"
AutoCAD SHX Text
SEE NOTE 1
AutoCAD SHX Text
SEE NOTE 1
AutoCAD SHX Text
SEE NOTE 1
AutoCAD SHX Text
18" MIN.
AutoCAD SHX Text
FLUSHING HYDRANT SHALL BE INSTALLED PLUMB AND TRUE IN UNOBSTRUCTED LOCATION. LIMIT OF UNOBSTRUCTED SPACE FROM SIDE OF HYDRANT SHALL BE 3'(36") MINIMUM FOR SHRUBS AND SIMILAR OBSTRUCTIONS WITH 10'(120") MINIMUM FOR TREES, WALLS, AND OTHER SIMILAR OBSTRUCTIONS. LIMIT OF UNOBSTRUCTED SPACE BEHIND HYDRANT SHALL BE 5' (60") MINIMUM.
AutoCAD SHX Text
THE SAME MODEL HYDRANT SHALL BE USED THROUGHOUT CURRENT CONTRACT PHASE, COLOR SHALL BE PURPLE, PANTONE 522C, OR PRIOR APPROVED EQUAL BY THE DEPARTMENT.
AutoCAD SHX Text
VALVE SHALL BE PLACED ADJACENT TO MAIN, AND RESTRAINED WITH MEGALUGS OR EQUAL.
AutoCAD SHX Text
ALL HYDRANTS SHALL BE TEED OFF OF MAINS
AutoCAD SHX Text
HYDRANTS SHALL NOT BE PLACED IN SIDEWALKS, ROADWAYS, OR BIKE PATHS. HYDRANT NOZZLE SHALL BE AT LEAST 24" MINIMUM FROM THE EDGE OF A SIDEWALK OR BIKE PATH.
AutoCAD SHX Text
9.
AutoCAD SHX Text
LENGTH OF RECLAIMED WATER MAIN TO FLUSHING HYDRANT VARIES BUT NOT TO EXCEED 20 FEET WITHOUT PRIOR DEPARTMENT APPROVAL.
AutoCAD SHX Text
10.
AutoCAD SHX Text
MINIMUM 18" SPOOL PIECE REQUIRED. IF TAPPING SLEEVE IS INSTALLED NO SPOOL PIECE IS REQUIRED BETWEEN SLEEVE AND GATE VALVE.
AutoCAD SHX Text
SPOOL PIECE (SEE NOTE 10)
AutoCAD SHX Text
20' P.B.C.U.E.
AutoCAD SHX Text
%%UPLAN%%U
AutoCAD SHX Text
%%USECTION%%U
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
36" COVER
AutoCAD SHX Text
12"
AutoCAD SHX Text
AREA
AutoCAD SHX Text
GRASS
AutoCAD SHX Text
RECLAIMED
AutoCAD SHX Text
WATER MAIN
AutoCAD SHX Text
R/W LINE FOR ROADS, BACK OF CURB/SIDEWALK
AutoCAD SHX Text
OR EDGE OF DRIVEWAY FOR OTHERS
AutoCAD SHX Text
LIMIT OF MINIMUM
AutoCAD SHX Text
UNOBSTRUCTED SPACE
AutoCAD SHX Text
EASEMENT
AutoCAD SHX Text
EDGE OF UTILITY
AutoCAD SHX Text
4'-8"
AutoCAD SHX Text
SEE NOTE 2
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
COMPRESSION FITTING
AutoCAD SHX Text
CORP. STOP
AutoCAD SHX Text
2"-4"
AutoCAD SHX Text
3/4" ANGLE CHECK VALVE W/ COMPRESSION FITTING = END OF PBCWUD SYSTEM
AutoCAD SHX Text
3/4" ANGLE LOCKING YOKE CURB STOP = PRESSURE TEST LIMIT
APPROVED METER BOX (PERMANENTLY INFUSED PURPLE COLOR WITH LID MARKED "RECLAIMED WATER DO NOT DRINK")
AutoCAD SHX Text
5/8"x3/4" METER TO BE SET BY THE DEPARTMENT
AutoCAD SHX Text
CUSTOMER SERVICE LINE
AutoCAD SHX Text
12" FROM R/W LINE, EDGE OF SIDEWALK, EDGE OF PAVEMENT, BACK OF CURB
AutoCAD SHX Text
RECOMMENDED MAX. 1" PRIVATE PRESSURE CONTROL VALVE (PCV) WITH STRAINER
AutoCAD SHX Text
APPROVED COMPRESSION BRASS BRANCH VALVE TO BE PLACED JUST INSIDE THE BODY OF METER BOX
AutoCAD SHX Text
1 1/2" PVC
AutoCAD SHX Text
1 1/2" PVC SCH. 40 PIPE
AutoCAD SHX Text
LONG SERVICES (SEE NOTE #3)
AutoCAD SHX Text
7 1/2"±1/2"
AutoCAD SHX Text
1 1/2"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
AutoCAD SHX Text
PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
BRASS RECOMMENDED
AutoCAD SHX Text
12" MIN.
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED GALVANIZED UNISTRUTS. BOLLARDS MAY BE REQUIRED
AutoCAD SHX Text
BY DEVELOPER/PROPERTY OWNER
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
18"
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
SEE NOTE 2
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
BY CONTRACTOR OR DEPARTMENT (SEE NOTE 10 & 11)
AutoCAD SHX Text
TEMPORARY CAP
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
CHECK VALVE IS REQUIRED FOR EVERY RECLAIMED WATER SERVICE.
AutoCAD SHX Text
MAXIMUM SERVICE LENGTH IS 100' TO METER.
AutoCAD SHX Text
8.
AutoCAD SHX Text
7.
AutoCAD SHX Text
3.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
4.
AutoCAD SHX Text
METER SERVICE WILL NOT BE INSTALLED AND/OR ACTIVATED UNTIL:
AutoCAD SHX Text
9.
AutoCAD SHX Text
METER TO BE SET BY DEPARTMENT.
AutoCAD SHX Text
10.
AutoCAD SHX Text
11.
AutoCAD SHX Text
12.
AutoCAD SHX Text
SUCCESSIVE TAPS INTO THE WATER MAIN SHALL BE SPACED A MINIMUM OF 18" APART AND SHALL NOT BE ON A COMMON LINE PARALLEL TO THE LONGITUDINAL AXIS OF THE PIPE. TAPS ON THE SAME SIDE OF A P.V.C. PIPE SECTION SHALL BE MIN. 10' APART.
AutoCAD SHX Text
"MINIMUM UNOBSTRUCTED SPACE" AS SHOWN IN NOTE 2 AND ON THE PLAN VIEW IS PROVIDED WITH 12" MINIMUM VERTICAL SEPARATION REQUIRED TO ALL OTHER UTILITIES.
AutoCAD SHX Text
ALL FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK MUST BE COMPLETELY INSTALLED OR THE DRIVEWAY AND/OR SIDEWALK MUST HAVE BEEN INSTALLED.
AutoCAD SHX Text
A.
AutoCAD SHX Text
B.
AutoCAD SHX Text
PIPING, VALVES & METER BOX LID TO BE PERMANENTLY IDENTIFIED AS "RECLAIMED WATER SYSTEM" COMPONENTS. PVC SHALL BE SCHEDULE 40 PIPE WITH SCHEDULE 80 FITTINGS.
AutoCAD SHX Text
LIMIT OF UNOBSTRUCTED SPACE FROM SIDE OF WATER METER BOX SHALL BE 36" MINIMUM FOR SHRUBS AND SIMILAR OBSTRUCTIONS WITH 60" MINIMUM FOR TREES, WALLS, AND OTHER SIMILAR OBSTRUCTIONS.
AutoCAD SHX Text
FOR INSTALLATION OF SERVICES UNDER DRIVEWAYS AND ROADWAYS USE 3" DIAMETER PVC SCH 40 OR HDPE SDR 9 CASING. CASING SHALL EXTEND 24" BEYOND EDGE OF PAVEMENT. END OF CASING TO BE SEALED WITH FOAM SEALANT. CASING TO BE COLOR CODED PURPLE.
AutoCAD SHX Text
METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. WATER SERVICE LINES AND TAPS SHALL NOT BE PLACED UNDER DRIVEWAYS WHENEVER POSSIBLE AND IF REQUIRED, ONLY WITH PRIOR DEPARTMENT APPROVAL.
AutoCAD SHX Text
THREADED AREAS OF CORPORATION STOP AND OTHER FITTINGS SHALL BE SPIRAL WRAPPED WITH TWO (2) WRAPS OF TEFLON TAPE.
AutoCAD SHX Text
THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT.
AutoCAD SHX Text
BEDDING (MIN. 4") AND COVER (MIN. 4") OVER SERVICE LINE OR CASING SHALL CONSIST OF FINE GRANULAR MATERIAL. UNSUITABLE IN-SITU MATERIALS SUCH AS MUCK, DEBRIS AND LARGER ROCKS SHALL BE REMOVED WITH 2" MAXIMUM SIZE.
AutoCAD SHX Text
6" PVC SPOOL PIECE W/ TEMPORARY CAP
AutoCAD SHX Text
POINT OF SERVICE
AutoCAD SHX Text
%%UPLAN%%U
AutoCAD SHX Text
%%USECTION%%U
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
1.
AutoCAD SHX Text
36" COVER
AutoCAD SHX Text
12"
AutoCAD SHX Text
AREA
AutoCAD SHX Text
GRASS
AutoCAD SHX Text
RECLAIMED
AutoCAD SHX Text
WATER MAIN
AutoCAD SHX Text
R/W LINE FOR ROADS, BACK OF CURB/SIDEWALK
AutoCAD SHX Text
OR EDGE OF DRIVEWAY FOR OTHERS
AutoCAD SHX Text
EASEMENT
AutoCAD SHX Text
EDGE OF UTILITY
AutoCAD SHX Text
4'-8"
AutoCAD SHX Text
2.
AutoCAD SHX Text
CHECK VALVE IS REQUIRED FOR EVERY RECLAIMED WATER SERVICE.
AutoCAD SHX Text
MAXIMUM SERVICE LENGTH IS 100' TO METER.
AutoCAD SHX Text
8.
AutoCAD SHX Text
7.
AutoCAD SHX Text
3.
AutoCAD SHX Text
6.
AutoCAD SHX Text
5.
AutoCAD SHX Text
4.
AutoCAD SHX Text
METER SERVICE WILL NOT BE INSTALLED AND/OR ACTIVATED UNTIL:
AutoCAD SHX Text
9.
AutoCAD SHX Text
METER TO BE SET BY DEPARTMENT.
AutoCAD SHX Text
10.
AutoCAD SHX Text
BY DEVELOPER
AutoCAD SHX Text
11.
AutoCAD SHX Text
RECLAIMED WATER MAIN
AutoCAD SHX Text
COMPRESSION FITTING
AutoCAD SHX Text
CORP. STOP
AutoCAD SHX Text
12.
AutoCAD SHX Text
ANGLE LOCKING YOKE CURB STOP W/ COMPRESSION FITTING = PRESSURE TEST LIMIT (3/4" FOR 5/8"x3/4" METER; 1" FOR 1" METER)
AutoCAD SHX Text
90° BEND
AutoCAD SHX Text
SUCCESSIVE TAPS INTO THE WATER MAIN SHALL BE SPACED A MINIMUM OF 18" APART AND SHALL NOT BE ON A COMMON LINE PARALLEL TO THE LONGITUDINAL AXIS OF THE PIPE. TAPS ON THE SAME SIDE OF A P.V.C. PIPE SECTION SHALL BE MIN. 10' APART.
AutoCAD SHX Text
3/4" OR 1" YOKE
AutoCAD SHX Text
APPROVED METER BOX (PERMANENTLY INFUSED PURPLE COLOR WITH LID MARKED "RECLAIMED WATER DO NOT DRINK")
AutoCAD SHX Text
12" FROM R/W LINE, EDGE OF SIDEWALK, EDGE OF PAVEMENT, BACK OF CURB
AutoCAD SHX Text
1 " PVC12" PVC
AutoCAD SHX Text
1 1/2" PVC SCH. 40 PIPE
AutoCAD SHX Text
LONG SERVICES (SEE NOTE #3)
AutoCAD SHX Text
1-1/2"x3/4" REDUCER FOR 5/8"x3/4" METER 1-1/2"x1" REDUCER FOR 1" METER
AutoCAD SHX Text
PRESSURE CONTROL VALVE (PCV) WITH SUPPORTS
AutoCAD SHX Text
BRASS RECOMMENDED
AutoCAD SHX Text
12" MIN.
AutoCAD SHX Text
SUPPORTS MAY BE ANGLED GALVANIZED UNISTRUTS. BOLLARDS MAY BE REQUIRED
AutoCAD SHX Text
18"
AutoCAD SHX Text
3/4" ANGLE CHECK VALVE W/ COMPRESSION FITTING
AutoCAD SHX Text
5/8"x3/4" METER TO BE SET BY THE DEPARTMENT
AutoCAD SHX Text
1-1/2"-2" ABOVE FINISHED GRADE IN GRASSED AREA. 0" IN PAVED AREA
RECOMMENDED MAX. 1" PRIVATE PRESSURE CONTROL VALVE (PCV) WITH STRAINER
AutoCAD SHX Text
PRIVATE DIRECT CONNECTION IRRIGATION SYSTEM
AutoCAD SHX Text
LIMIT OF MINIMUM UNOBSTRUCTED SPACE (SEE NOTE 2)
AutoCAD SHX Text
CUSTOMER SERVICE LINE
AutoCAD SHX Text
TEMPORARY CAP
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
SEE NOTE 2
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
BY CONTRACTOR OR DEPARTMENT (SEE NOTE 10 & 11)
AutoCAD SHX Text
SEE NOTE 2
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
6" PVC SPOOL PIECE W/ TEMPORARY CAP
AutoCAD SHX Text
POINT OF SERVICE
AutoCAD SHX Text
"MINIMUM UNOBSTRUCTED SPACE" AS SHOWN IN NOTE 2 AND ON THE PLAN VIEW IS PROVIDED WITH 12" MINIMUM VERTICAL SEPARATION REQUIRED TO ALL OTHER UTILITIES.
AutoCAD SHX Text
ALL FORM BOARDS FOR DRIVEWAY AND/OR SIDEWALK MUST BE COMPLETELY INSTALLED OR THE DRIVEWAY AND/OR SIDEWALK MUST HAVE BEEN INSTALLED.
AutoCAD SHX Text
A.
AutoCAD SHX Text
B.
AutoCAD SHX Text
PIPING, VALVES & METER BOX LID TO BE PERMANENTLY IDENTIFIED AS "RECLAIMED WATER SYSTEM" COMPONENTS. PVC SHALL BE SCHEDULE 40 PIPE WITH SCHEDULE 80 FITTINGS.
AutoCAD SHX Text
LIMIT OF UNOBSTRUCTED SPACE FROM SIDE OF WATER METER BOX SHALL BE 36" MINIMUM FOR SHRUBS AND SIMILAR OBSTRUCTIONS WITH 60" MINIMUM FOR TREES, WALLS, AND OTHER SIMILAR OBSTRUCTIONS.
AutoCAD SHX Text
FOR INSTALLATION OF SERVICES UNDER DRIVEWAYS AND ROADWAYS USE 3" DIAMETER PVC SCH 40 OR HDPE SDR 9 CASING. CASING SHALL EXTEND 24" BEYOND EDGE OF PAVEMENT. END OF CASING TO BE SEALED WITH FOAM SEALANT. CASING TO BE COLOR CODED PURPLE.
AutoCAD SHX Text
METER SHALL NOT BE PLACED IN SIDEWALK OR DRIVEWAY AREAS. WATER SERVICE LINES AND TAPS SHALL NOT BE PLACED UNDER DRIVEWAYS WHENEVER POSSIBLE AND IF REQUIRED, ONLY WITH PRIOR DEPARTMENT APPROVAL.
AutoCAD SHX Text
THREADED AREAS OF CORPORATION STOP AND OTHER FITTINGS SHALL BE SPIRAL WRAPPED WITH TWO (2) WRAPS OF TEFLON TAPE.
AutoCAD SHX Text
THE DEVELOPER/PROPERTY OWNER OR ASSIGNEE SHALL BE RESPONSIBLE FOR INSTALLATION OF SERVICES BEYOND PRESSURE TEST LIMITS AS SPECIFIED BY THE DEPARTMENT.
AutoCAD SHX Text
BEDDING (MIN. 4") AND COVER (MIN. 4") OVER SERVICE LINE OR CASING SHALL CONSIST OF FINE GRANULAR MATERIAL. UNSUITABLE IN-SITU MATERIALS SUCH AS MUCK, DEBRIS AND LARGER ROCKS SHALL BE REMOVED WITH 2" MAXIMUM SIZE.
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
36"
AutoCAD SHX Text
10'-0"
AutoCAD SHX Text
10'-0"
AutoCAD SHX Text
ROADWAY, FENCE, WALL, OR LANDSCAPE BERM (SEE NOTE 5)
AutoCAD SHX Text
ONE LENGTH MINIMUM
AutoCAD SHX Text
DUCTILE IRON TO EXTEND
AutoCAD SHX Text
CEMENT GROUT
AutoCAD SHX Text
ENDS SEALED WITH
AutoCAD SHX Text
ROCK BASE OR DIRT
AutoCAD SHX Text
PAVING OR SOD
AutoCAD SHX Text
.625
AutoCAD SHX Text
.625
AutoCAD SHX Text
.625
AutoCAD SHX Text
.500
AutoCAD SHX Text
.500
AutoCAD SHX Text
.372
AutoCAD SHX Text
.312
AutoCAD SHX Text
.312
AutoCAD SHX Text
.250
AutoCAD SHX Text
.250
AutoCAD SHX Text
.250
AutoCAD SHX Text
.250
AutoCAD SHX Text
.250
AutoCAD SHX Text
.188
AutoCAD SHX Text
72"
AutoCAD SHX Text
60"
AutoCAD SHX Text
54"
AutoCAD SHX Text
48"
AutoCAD SHX Text
42"
AutoCAD SHX Text
36"
AutoCAD SHX Text
30"
AutoCAD SHX Text
30"
AutoCAD SHX Text
24"
AutoCAD SHX Text
24"
AutoCAD SHX Text
20"
AutoCAD SHX Text
20"
AutoCAD SHX Text
14"
AutoCAD SHX Text
12"
AutoCAD SHX Text
WALL THICKNESS
AutoCAD SHX Text
MINIMUM
AutoCAD SHX Text
INSIDE DIAMETER (MIN)
AutoCAD SHX Text
STEEL CASING
AutoCAD SHX Text
PIPE SIZE
AutoCAD SHX Text
CARRIER
AutoCAD SHX Text
48"
AutoCAD SHX Text
42"
AutoCAD SHX Text
36"
AutoCAD SHX Text
30"
AutoCAD SHX Text
24"
AutoCAD SHX Text
20"
AutoCAD SHX Text
18"
AutoCAD SHX Text
16"
AutoCAD SHX Text
14"
AutoCAD SHX Text
12"
AutoCAD SHX Text
10"
AutoCAD SHX Text
8"
AutoCAD SHX Text
6"
AutoCAD SHX Text
4"
AutoCAD SHX Text
%%UNOTES%%U:
AutoCAD SHX Text
(SEE NOTE 2)
AutoCAD SHX Text
1.
AutoCAD SHX Text
2.
AutoCAD SHX Text
DUCTILE IRON RESTRAINED JOINT PIPE WITH CASING SPACERS INSTALLED, PER MANUFACTURERS REQUIREMENTS. (BELL JOINT HARNESS RESTRAINT IS NOT ACCEPTABLE).
AutoCAD SHX Text
CASING SPACER(TYP.)
AutoCAD SHX Text
5.
AutoCAD SHX Text
4.
AutoCAD SHX Text
MIN. 36" FROM END OF CASING TO FITTING OR PIPE JOINT (TYP.)
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
DEPARTMENT APPROVED NEOPRENE END SEAL W/ STAINLESS STEEL BANDS (TYP.)
AutoCAD SHX Text
A PROFILE DRAWING TO SCALE FOR EACH JACK AND BORE, DIRECTIONAL DRILL, OR DIRECT BURIED INSTALLATION IS REQUIRED TO BE APPROVED BY THE DEPARTMENT PRIOR TO INSTALLATION. IF A SPLIT CASING IS REQUIRED THEN SHOP DRAWINGS ARE REQUIRED TO BE SUBMITTED AND APPROVED BY THE DEPARTMENT PRIOR TO CONSTRUCTION AND/OR INSTALLATION.
AutoCAD SHX Text
THICKER WALL CASINGS AND LARGER COVER OVER CASING MAY BE REQUIRED BY THE RIGHT-OF-WAY OWNER.
AutoCAD SHX Text
3.
AutoCAD SHX Text
STEEL CASING SHALL BE COATED OUTSIDE WITH COAL TAR EPOXY (MIN. 16 MILS DFT) AND BE PAINTED WITH A 4" MINIMUM WIDE CONTINUOUS STRIPE, COLOR CODED TO MATCH THE PIPE INSIDE, ALONG THE TOP AXIS OF THE CASING.
AutoCAD SHX Text
STEEL CASING IS REQUIRED FOR ALL RECLAIMED WATER MAIN INSTALLATIONS UTILIZING JACK AND BORE CONSTRUCTION AND WHEN MAINS ARE INSTALLED UNDER FENCES, WALLS, OR LANDSCAPE BERMS. WHEN THE CASING IS INSTALLED UNDER FENCES, WALLS, OR LANDSCAPE BERMS IT SHALL BE CENTERED ON THE PREVIOUS BARRIER AND IS REQUIRED TO EXTEND 10' MINIMUM PAST BARRIER ON EACH SIDE UNLESS OTHERWISE PREVIOUSLY APPROVED BY THE DEPARTMENT.
AutoCAD SHX Text
PIPE IN CASING SHALL BE PULLED TO FULLY ENGAGE RESTRAINT.
![· 2018. 1. 19. · *yrm ]-t 4r (t +pvu z* "q \y#4r (j6b+/.x*(q 0l [v 4r (](https://img.pdfslide.us/doc/110x75/6047699cd990367e57623af2/-2018-1-19-yrm-t-4r-t-pvu-z-q-y4r-j6bxq-0l-v-4r-.jpg)
