Embed Size (px)
DESCRIPTION
Pillar trim in catia
Citation preview
Pillar Trim Topics
1. Nomenclature
2. Thickness for individual parts
3. Drop & increase thickness
4. Section Criteria’s, fixations & mounting with BIW
5. General gap & biting conditions
Door Trim basically consists of seven parts basically in both front & rear door panel
Sr No Part Name
1 A PILLAR UPPER
2 A PILLAR LOWER
3 B PILLAR UPPER
4 B PILLAR LOWER
5 FRONT DOOR SILL
6 REAR DOOR SILL
7 C PILLAR UPPER
8 C PILLAR LOWER
Thickness, Drop & Increase thickness
C-pillar upperB-pillar upper
Front door sillRear door sill
C-pillar lower
A-pillar upper
A-pillar lower
B-pillar lower
C-pillar upperB-pillar upper
Front door sillRear door sill
C-pillar lower
A-pillar upper
A-pillar lower
B-pillar lower
Close 1 – Increase Thickness
Close 2 – Drop
Thickness, Drop & Increase thicknessGenerally drop & increase thickness are done for increasing strength of the part at end condition.
Drop Criteria
Criteria for doing drop end condition
Drop Criteria
Criteria for doing increase thickness at end conditionFor 9mm transition length there is a draft problem we can increase the Transition length upto 15mm.
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
Section criteria’s, fixations & mounting with BIW
General gap & biting conditions
General gap & biting conditions
General gap & biting conditions
General gap & biting conditions
General gap & biting conditions
![1 1 1 1 1 1 1 ¢ 1 1 1 - pdfs.semanticscholar.org€¦ · 1 1 1 [ v . ] v 1 1 ¢ 1 1 1 1 ý y þ ï 1 1 1 ð 1 1 1 1 1 x](https://img.pdfslide.us/doc/110x75/5f7bc722cb31ab243d422a20/1-1-1-1-1-1-1-1-1-1-pdfs-1-1-1-v-v-1-1-1-1-1-1-y-1-1-1-.jpg)
![[XLS] · Web view1 1 1 2 3 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 1 2 2 3 5 1 1 1 1 34 1 1 1 1 1 1 1 1 1 1 240 2 1 1 1 1 1 2 1 3 1 1 2 1 2 5 1 1 1 1 8 1 1 2 1 1 1 1 2 2 1 1 1 1](https://img.pdfslide.us/doc/110x75/5ad1d2817f8b9a05208bfb6d/xls-view1-1-1-2-3-1-1-2-2-1-1-1-1-1-1-2-1-1-1-1-1-1-2-1-1-1-1-2-2-3-5-1-1-1-1.jpg)
![1 1 1 1 1 1 1 ¢ 1 , ¢ 1 1 1 , 1 1 1 1 ¡ 1 1 1 1 · 1 1 1 1 1 ] ð 1 1 w ï 1 x v w ^ 1 1 x w [ ^ \ w _ [ 1. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ð 1 ] û w ü](https://img.pdfslide.us/doc/110x75/5f40ff1754b8c6159c151d05/1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-w-1-x-v.jpg)
