1

1FINITY™

T100 Transport Blade

shaping tomorrow with you

The 1FINITY™ T100 metro data center interconnect (mDCI) blade is a compact, carrier-grade platform that delivers dense 100 GbE to 200G muxponding in a compact, one rack unit (1RU) form factor. The T100 solves DCI space and power challenges, delivers high-performance scalable services, and reduces operating costs.

2

The Everything Pluggable Platform: A New ParadigmWith the 1FINITY platform, Fujitsu has implemented DP-16QAM technologies to achieve 200 Gbps per wavelength with a modular, disaggregated architecture that’s dense yet simple. The T100 metro DCI blade incorporates this new architecture. With its innovative, modular 1RU chassis, the T100 is an everything-pluggable platform, which has an onboard, universal CPU as its only integrated component. T100 fans, power supplies, and network function cards take the form of modular plug-in units (PIUs).

The modular design enhances availability by minimizing mean time to repair (MTTR), allowing most sources of failure to be repaired quickly. Additionally, the system is future-proof and evergreen: new modules can be deployed as technology becomes available.

The low-cost, universal CPU provides a management interface for programming PIU and shelf functions. For operational efficiency, there’s support for both current and future PIUs in any combination, and there’s no need to upgrade system software. The PIUs are designed as fully functional systems to allow faster development, speed time to market, and reduce development costs without upgrades or changes to the universal CPU software.

Each PIU can be developed, tested, and brought up independently, basically decoupling shelf management from PIU control. Ninety percent of software and hardware are based on open-source and third-party components.

OperationsThe 1FINITY T100 can be managed using command-line interface (CLI) and the REST API. In a stand-alone deployment, using the CLI, simply turn on the interfaces and select the wavelength. With the SDN and NFV revolution solidly underway, the 1FINITY T100 fits easily in an SDN management architecture through support of a REST API for management from any SDN network controller.

The T100 offers an innovative real-time power performance measurement that data center operators can use to monitor power usage. Finally, to simplify operations and maintenance activities, the T100 has a blue “Find Me” LED on the front panel.

T100 Blade at a Glance• Compact, modular, high density architecture

• 100 GbE to 200G muxponding

• 8 × 100 GbE client interfaces and 4 × 200G narrowband network interfaces using 16QAM

• Low initial cost and pay-as-you-grow expansion

• Efficient scaling and rack utilization

• Real-time power-usage performance measurement

• Open optics

• CLI and REST API

1FINITYT100 Transport Blade

Purpose-Built for Metro Data Center Interconnect (mDCI)

100 GbE 100 GbE200G 200G100 GbE 100 GbE

3

1FINITYT100 Transport Blade

Base System

System Configuration Modular chassis

Modules Supports two modules

System Capacity 1.6 Tbps (800 Gbps client and 800 Gbps line side)

USB Serial management

Local LAN Port 10/100Mbps Ethernet RJ-45

Red: Critical, Major, and Minor

Front LEDs Blue: “Find Me”

Fan 4

Power Supply Dual replaceable power supplies

Software OS Linux

Modules

Modules per Chassis 2

Client Interfaces per Module 4 × 100 Gbps QSFP28

Line Interfaces per Module 2 × 200 Gbps CFP2-ACO

Line Optics

Line Ports per Chassis 8

Optical Module CFP2-ACO

Optical Interface 50 GHz C-band tunable ITU channels

Modulation DP-16QAM

Nominal Reach 100 km

Client Optics

Client Ports per Chassis 8

Optical Interface QSFP28

Performance Monitoring

Ethernet Service PMs • 24-hour, 15-minute, 1-week, and 1-month bins

• Packets received and transmitted

OTN PMs • Rx, Tx, and error statistics • FECB, FEUB

Thresholds and TCA Configurable

Power Real-time power-usage PM

Management

CLI

REST API

NETCONF (in R1.2)

Dimensions

(H × W × D) 1.73” × 19” × 24” (1RU) 44.45 × 483 × 609 mm

Operation

Operating Temperature 0 to +40 °C

Humidity 5% to 95% noncondensing

Power Supply Dual power modules 100 V AC to 240 V AC −42 V DC to −56 V DC

Nominal/Maximum Power Less than 0.8 W per Gbps

Regulatory and Compliance

FCC Part 15, Class A

UL 60950-1

CSA

RoHS 5/6

Specifications

1.0/R1.1/08.15

© Copyright 2015 Fujitsu Network Communications, Inc. FLASHWAVE® and NETSMART® are trademarks of Fujitsu Network Communications, Inc. (USA).1FINITY™, FUJITSU (and design)® and “shaping tomorrow with you” are trademarks of Fujitsu Limited in the United States and other countries. All Rights Reserved. All other trademarks are the property of their respective owners. Configuration requirements for certain uses are described in the product documentation. Features and specifications subject to change without notice.

Fujitsu Network Communications, Inc.2801 Telecom Parkway, Richardson, TX 75082

Tel: 888.362.7763

us.fujitsu.com/telecom