Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
Quick Start Guide1D Barcode Scanner
Contents: Barcode Scanner, Quick Start Guide, USB/RS 232 CablePower Adapter (optional)
Lights Indicator
Beeps
Beep indication ExplanationOne beep Decoding SuccessfullyThree beeps USB Data transfer failedFour beeps Power ONContinuous beep Successful parameter setting
LED indication ExplanationBlue light blinking Decoding SuccessfullyRed light ON Standby status
NOTE: Product appearance may vary
Scanner Overview Plug & Unplug Cable
Connection Guide
Plug in as shown above Press the tab until it clicks, thenpull out the cable
Scanning Angle Correct Scan Method
NOTE: Laser beam or Red LED light should fullycover the bar code
Q1: USB bar code scanner gives a continous beeping soundafter scanner with no data uploaded.
A1: Unplug the plug to the scanner from USB port and plug it into a different USB port or reset the interface mode to “USB HUD Keyboard.”
Q2: USB bar code scanner makes alarm buzzer sound and nodata is uploaded.
A2: Restore factory default
Q3: No laser beam or LED light after connection via RS232
A3: Refer to Data Cable Connection guide in this manual andcheck power supply.
Q4: No data uploaded and alarm buzzer after scanning viaRS232.
A4: Terminal should have software to transfer data whenusing RS232.
Troubleshooting Q & A
Automatically
Decode Settings - Set Up Function Bar CodesDefault Parameters
Numeric Keypad
Interface Mode Code39 Settings
UPC SettingsKeyboard LanguageTrigger Mode
Decode Mode
Suffix Values
Auto Trigger (optional)
Choose a keyboard layout according to your systemlanguage settings.
e