1” GEN 2 SPM Cartridge & Valve Product Line · 1” SPM, allowing simple drop-in replacement to existing installations. As a result of the new Gilmore 1” GEN 2 SPM product line,

www.gilmore.com

Document Number: 105-050820-001 (05/08/20) STDFM-163 Product Information Bulletin (PIB) Page 1 of 5

REV DATE DESCRIPTION ORIGIN (issued by)

APPROVED

001 05-08-20 Document No.: 105-050820-001 AP BR

COMPANY PROPRIETARY INFORMATION

© 2014 - 2020 Proserv Gilmore Valve, LLC and/or its affiliates (Gilmore). All rights reserved. Proserv®, Gilmore™, Gilmore & Design (Stallion) and Gilmore, a Proserv Company™ are registered trademarks or trademarks of Gilmore. This Bulletin and the information contained herein is not to be, in whole or in part, reproduced or transmitted in any form by any means without the express permission of Gilmore. DISCLAIMER: Whilst Gilmore has carefully reviewed the contents of this Bulletin and believes the information to be correct, Gilmore does not assume any liability in connection with any use of or reliance upon this information and gives no representation or warranty, express or implied, in respect of the information or any products described herein. This Bulletin is intended for use by persons having suitable technical expertise and skill, at their own discretion and risk. Gilmore may change the information contained herein at any time without notice.

For more information:

Call (800) 469-8786

[email protected]

Gilmore, A Proserv Company

1231 Lumpkin Road

Houston, TX 77043

1” GEN 2 SPM Cartridge & Valve Product Line

Product Information Bulletin

http://www.gilmore.com/

mailto:[email protected]


www.gilmore.com


Gilmore announces the new 1” GEN 2 SPM product line for critical

offshore and subsea applications. The 1” GEN 2 SPM has been

redesigned with significant improvements over its predecessor. The 1”

GEN 2 SPM fits within the same cavity & footprint as the legacy SPM,

allowing direct replacement in existing Gilmore SPM manifolds.

Gilmore’s proprietary GEN 2 SPM cartridge technology provides an order

of magnitude improvement in cycle life.

Features and Benefits:

Qualification exceeds API 16D requirements –

o Two separate full flow tests at 2500 cycles each

Proprietary bi-directional SPM cartridge performs in both Normally

Closed or Normally Open applications

Reduces interflow

Reduces pressure spikes

Improved valve materials:

o 316 SS Body and Spring

o Nitronic 50 Piston Rod

o Nitronic 60 Seal Sleeve and Cage

o Aluminum Bronze Bushing

o Shouldered & Torqued Nylon Lock Nut

o Dynamic T-Seals

o HNBR Soft Seals with PEEK Double Back-up Rings

o Delrin 511P Top and Bottom Seats with increased thickness

o A286 Gr 660 Capscrews

o Wide array of options available for body & port style, and

customized manifolded assemblies

o Patent Pending

1” GEN 2 SPM Cartridge & Valve Product Line

Product Information Bulletin


www.gilmore.com


Figure 1. PN 29109: 1” GEN 2 SPM Valve, N.C., 1" NPT,

5000 psi Supply

Gilmore has exceeded API 16D requirements by qualifying the new 1” GEN 2 SPM designs to multiple endurance

qualification tests to 2500 cycles, at 5000 psi and 150 gpm, with 1% - 4% water glycol test fluid.

The new 1” GEN 2 SPM cartridge & valve have the identical cavity and valve footprint dimensions as the Gilmore legacy

1” SPM, allowing simple drop-in replacement to existing installations.

As a result of the new Gilmore 1” GEN 2 SPM product line, please note that new sales of the legacy 1” SPM cartridge and

valve part numbers listed below will be discontinued as of May 7, 2021. The new Gilmore 1” GEN 2 SPM cartridge and

valves are now available as replacements for the legacy 1” SPM cartridge and valves.


www.gilmore.com


After they are discontinued, Gilmore will continue to support the discontinued legacy 1” SPM product line:

Gilmore will continue providing repair kits and seal kits in support of discontinued legacy 1” SPM Cartridge and

Valves for a minimum of 3 years. The legacy 1” SPM Cartridge and Valves listed below are field repairable.

Gilmore Aftermarket will continue to support discontinued legacy products with factory failure analysis and repair

services for a minimum of 3 years.

Please note that GEN 2 repair kits are not interchangeable with legacy repair kits and cannot be used in legacy SPMs.

Please contact Gilmore Customer Service for any assistance needed while selecting the GEN 2 replacement valve part

number.

Table 1. New and Legacy 1 inch SPM Cartridge and Valve Part Number Cross Reference:

Item Legacy Description Legacy

Valve PN

Legacy Repair Kit

PN*

GEN 2 Cartridge or Valve Description

GEN 2 Valve

PN

1.1 MVA, 4-Way, 1” SPM, 5000 psi, 1/4 NPT Pilot Port, 1 NPT Block

Ports 147581

27168-2 RK

27167-2 RK

MVA, 4-Way, 1” GEN 2 SPM, 5000 psi, 1/4 NPT Pilot Port, 1

NPT Block Ports 29123

1.2 Valve, 1” SPM, N.O., 5000 psi, 1/4 NPT Pilot Port, 1 NPT Block

Ports 169129 27168-2 RK

Valve, 1” GEN 2 SPM, N.O., 5000 psi, 1/4 NPT Pilot Port, 1

NPT Block Ports 29111

1.3 Valve, 1” SPM, N.C., 5000 psi,

1/4 NPT Pilot Port, 1 NPT Block Ports

27612-1 27167-2 RK Valve, 1” GEN 2 SPM, N.C.,

5000 psi, 1/4 NPT Pilot Port, 1 NPT Block Ports

29109

1.4 Cartridge, 1” SPM, N.O., 5000

psi, 1/4 NPT Pilot Port 27167-2 27167-2 RK

Cartridge, 1” GEN 2 SPM, N.O. & N.C., 5000 psi, 1/4 NPT Pilot

Port 29110

1.5 Cartridge, 1” SPM, N.C., 5000

psi, 1/4 NPT Pilot Port 27168-2 27168-2 RK


Port 29110

1.6 Cartridge, 1” SPM, N.O., 5000 psi, 1/4 NPT Pilot Port, Delrin

Seats 27167-3 27167-3 RK


Port 29110

1.7 Cartridge, 1” SPM, N.C., 5000 psi, 1/4 NPT Pilot Port, Delrin

Seats 27168-3 27168-3 RK


Port 29110

1.8 Cartridge, 1” SPM, N.O., 5000 psi, 1/4 NPT Pilot Port, Delrin

Seats 28478 28478 RK


Port 29110

1.10 Cartridge, 1” SPM, N.C., 5000 psi, 1/4 NPT Pilot Port, Delrin

Seats 28477 28477 RK


Port 29110

1.11 Cartridge, 1” SPM, N.C., 5000

psi, 1/4 SAE Pilot Port 28579 28579 RK


Port 29122

*The GEN 2 valve repair kit part number will match the category part numbers with a space and (RK) at the end. *The GEN 2 valve seal kit part number will match the category part numbers with a space and (SK) at the end.


www.gilmore.com


If a new Gilmore 1-1/2 inch GEN 2 SPM part number is not listed above for a specific legacy part number, please contact Gilmore Customer Service to request a quotation and creation of a new GEN 2 part number. Please contact Gilmore Customer Service to request drawings and quotations for these SPMs

at [email protected].



2.33

2.81

AA

MARK WITH LOGO ANDCOMPANY INFORMATION229109

VER (AX VERSION #)(SERIAL NUMBER-

SAME S/N AS CARTRIDGE )PATENT PENDING

5,000 PSI(DATE OF MFG)

SEE SHOP TRAVELERFOR ADDITIONAL INFO REQUIRED

2

SEE SHEET 2

VENT 1" NPTF(2X .25SPANNER)

4.00

10.08 6.50 3.58

5.25FLATS

2X 2.62FLATS

SUPPLY1" NPTF

1/4" NPTFPILOT

2.50

1.25

2.50

1.25

5.50

(MOUNTING HOLES4X 7/16-14 UNC .50)

FUNCTION1" NPTF

3,000 PSIAT 5000 PSI SUPPLY RECOMMENDEDMINIMUM PILOT PRESSURE:

1" NPTF1/4" NPTF

VENT:PILOT:

PRESSURE DATA

PORTS

FLOW DATA

GENERAL DATATEMPERATURE RANGE: 32 F TO 150 FAPPROX WEIGHT: 43 LBSFIELD SERVICEABLE

SUPPLY MAWP:

SUPPLY: 1" NPTF

PILOT MAWP: 5,000 PSI 5,000 PSI

FLUIDS: 1.) WATER BASED DRILLING CONTROL FLUID. 2.) MINERAL OIL BASED DRILLING CONTROL FLUID.

Cv = 8


MAX FLOW CAPACITY: 175 GPM

FUNCTION: 1" NPTF

FUNCTION SUPPLY

VENT

PILOT

SCHEMATICN.C.

NOTES:

MARKING: MARK AS SHOWN USING LASER ETCH OR COMPUTER CONTROLLED DOT PEEN MARKING MACHINE, .06 HIGHMIN CHARACTERS.

3. FOR BOTTOM SEAL REMOVAL USE TOOL ATL 10010-002.X, IN COLUMN DEPICTS PARTS IN SEAL KIT 29110 SK.4.

5. X, IN COLUMN DEPICTS PARTS IN REPAIR KIT 29110 RK.

6

7

TORQUE CARTRIDGE TO 300 FT-LBS IN MANIFOLD BLOCKUSING SPECIAL TOOL ATL 10111.

ASSEMBLY PROCEDURE: 50282STANDARD FAT PROCEDURE: 50283EXTENDED FAT PROCEDURE: 50284SERVICE MANUAL: 51026

1 MARKING: MARK COMPONENT WITH ASSEMBLY W.O.AS SHOWN ON THE COMPONENT DRAWING

PATENT PENDING

7

2

REVISIONS

REV ERN /ECO NUMBER DRAWN CHECKED APPROVED

A ERN 02381

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 1 2

VALVE, 1", SPM, GEN 2, N.C., 1" NPTF BLOCK PORTS, 1/4"

NPTF PILOT PORT

ASolidWorks

DRAWN BY

APPROVAL

ENGINEER

THE INFORMATION CONTAINED IN THIS DRAWING IS THESOLE PROPERTY OF GILMORE VALVE CO UNLESS OTHERWISESTATED. ANY REPRODUCTION IN PART OR WHOLE WITHOUTTHE WRITTEN PERMISSION OF GILMORE VALVE CO IS PROHIBITED.

DATE

A

B

DATECHECKED BY

DATE

ERN NUMBER DATE

1234

DWG NO

A

01/29/20

2910902381

SEE PARTS ON INDIV BOM

TREATMENT:

MATERIAL:

PROCEDURE NUMBER:

CONDITION:

DIMENSIONS AND TOLERANCES AREIN INCHES PER ASME Y14.5M-1994.

TOLERANCES: .X: .1.XX: .01.XXX: .005

ANGLES: .5

UNLESS OTHERWISE SPECIFIED:1)

SURFACE TEXTURE:2)

CORADIAL FEATURES SHALL BE WITHIN .010

3)

BREAK SHARP EDGES .0104)INTERNAL RADII SHALL BE .016 MAX5)DRILL POINTS OPTIONAL WHEN SHOWNUNSPECIFIED, ALL DRILL POINT ANGLESSHALL BE BETWEEN 90 -140

6)

63

ENGINEERING

4/09/20

4/09/20

4/10/20

4/10/20

4-13-20

4-13-20

SECTION A-A

2

16

1/4" NPTFPILOTFUNCTION

1" NPTF

1" NPTFVENT

1" NPTF SUPPLY(SHOWN ROTATED 90 OUT OF POSITION

FOR ILLUSTRATION PURPOSES)

(3/8" HEX)

1

BILL OF MATERIALSITEM NO PART NUMBER DESCRIPTION MATERIAL RK SK

1 29110VALVE, CARTRIDGE, SPM, GEN 2, 1", N.O. OR N.C., 5,000 PSI SUPPLY, 1/4"

NPTF PILOT PORTREFER TO INDV PARTS 1 X X

2 27395-2 BLOCK, VALVE, SPM, N.C., 1" NPTF, 6000 PSI 27395 1

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 2 2

ASolidWorks

A

B

1234

DWG NO

A

29109

ENGINEERING

2.81

AA

29110VER (AX VERSION #)

(SERIAL NUMBER)PATENT PENDING



2

SEE SHEET 2

MARK WITH LOGO ANDCOMPANY INFORMATION 2

2X 2.62FLATS

8.79

(2X .25SPANNER)

1/4" NPTFPILOT

NOTES:

2 MARKING: MARK AS SHOWN USING LASER ETCH OR COMPUTER CONTROLLED DOT PEEN MARKING MACHINE, .06 HIGH MIN CHARACTERS.



TORQUE TO 25 FT-LBS.6

7 TORQUE TO 300 FT-LBS IN BLOCK USING SPECIALTOOL ATL 10111.


9

ALL MANUFACTURED ITEMS ARE PASSIVATED.8

1 MARK COMPONENT WITH ASSEMBLY W.O. NUMBER AS SHOULD ONCOMPONENT DRAWING


PRESSURE DATA

FLOW DATA


SUPPLY MAWP: PILOT MAWP:

5,000 PSI 5,000 PSI


Cv = 8MAXIMUM FLOW CAPACITY: 175 GPM


FUNCTION SUPPLY

VENT

PILOT

SCHEMATICN.C.

SCHEMATICN.O.

VENT

PILOT

SUPPLYFUNCTION

PATENT PENDING

9

8

REVISIONS


A ERN 02381

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 1 2

VALVE, CARTRIDGE, SPM, GEN 2, 1", N.O. OR N.C., 5,000 PSI SUPPLY,

1/4" NPTF PILOT PORT

ASolidWorks

DRAWN BYAPPROVAL

ENGINEER


DATE

A

B

DATECHECKED BY

DATE

ERN NUMBER DATE

1234

DWG NO

A

01/28/20

2911002381

REFER TO INDV PARTS

TREATMENT:

MATERIAL:

PROCEDURE NUMBER:

CONDITION:



ANGLES: .5


SURFACE TEXTURE:2)


3)


6)

63

ENGINEERING

4/13/20

4/13/20

4/13/20

4/13/20

4-13-20

4-13-20

SECTION A-A

5 18 9 18 13 14 13 17 12 17 15 19 15611

1

72

10 21 103

8

16 20 16

4

6

7(3/8" HEX)

1.00 MAX

1.00 MAX

1.00MAX

2.5022.500

2.7522.750

2.6262.624

3.00

2.88

1.25

5.21 4.71

1.09

.063 1.09

3.04

4X 30Á 30Á

CAVITY DETAIL

3" - 5 .94 MIN29 STUB ACME-2G

323232

.002 A

.002 A

.002 B

AB

1

1

8

BILL OF MATERIALSITEM NO

PART NUMBER DESCRIPTION MATERIAL QTY RK SK

1 193604 SPRING HOUSING A274 TP S21800(NITRONIC 60) 1

2 193598 SPACER, VALVE, SPM, 1", GEN 2

A276 TP S21800(NITRONIC 60) 1

3 193599 SEAL SLEEVE A276 TP S21800(NITRONIC 60) 1 X

4 193600 SEAT, TOP, VALVE, SPM, 1", GEN 2 DELRIN 511P 1 X X

5 193601 SEAT, BOTTOM DELRIN 511P 1 X X

6 193602 PISTON ROD, SHOULDERED A276 S20910(NITRONIC 50) 1

7 193603 BUSHING, VALVE, SPM, 1", GEN 2

ASTM B169 C61400(ALUMINUM BRONZE) 1

8 21112-005 HEX LOCK NUT, NYLON F594 ALLOY GR 2, NYLON (316 SS) 1 X X

9 18100-101K1 O-RING HNBR 1 X X

10 27191 WEAR BAND DELRIN AF 2 X X

11 27187 SPRING COMPRESSION A313 TP 316 1

12 18100-114K1 O-RING HNBR 1 X X13 209271 RING, BACKUP PEEK 2 X X14 18100-111K1 O-RING HNBR 1 X X


16 193606 RING, BACKUP PEEK 2 X X



19 18108-014 T-SEAL, PISTON CARBOXYLATED NITRILE / NYLATRON 1 X X

20 18108-509 T-SEAL, ROD CARBOXYLATED NITRILE / NYLATRON 1 X X

21 207538 T-SEAL, SLEEVE CARBOXYLATED NITRILE / NYLATRON 1 X X

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 2 2

ASolidWorks

A

B

1234

DWG NO

A

29110

ENGINEERING

2.50

1.25

2.50

1.25 5.50

(MOUNTING HOLES4X 7/16-14 UNC .50)

FUNCTION1" NPTF

2.33

2.81

AA


(DATE OF MFG)5,000 PSI

PATENT PENDING

2

(SERIAL NUMBER-SAME S/N AS CARTRIDGE )

VER (AX VERSION #)29111

2 MARK WITH LOGO ANDCOMPANY INFORMATION

1" NPTF SUPPLY

SEE SHEET 2

(2X .25SPANNER)

4.00

10.08 6.50 3.58

5.25FLATS

2X 2.62FLATS

1/4" NPTFPILOT

1" NPTF VENTNOTES:

MARKING: MARK AS SHOWN USING LASER ETCH OR COMPUTER CONTROLLED DOT PEEN MARKING MACHINE, .06 HIGHMIN CHARACTERS.



6

7

TORQUE CARTRIDGE TO 300 FT-LBS IN MANIFOLD BLOCKUSING SPECIAL TOOL ATL 10111.


1 MARKING: MARK COMPONENT WITH ASSEMBLY W.O.AS SHOWN ON THE COMPONENT DRAWING


1" NPTF1/4" NPTF

VENT:PILOT:

PRESSURE DATA

PORTS

FLOW DATA


SUPPLY MAWP:

SUPPLY: 1" NPTF



Cv = 8



FUNCTION: 1" NPTF

SCHEMATICN.O.

FUNCTION

VENT

PILOT

SUPPLY

7

PATENT PENDING

2

REVISIONS


A ERN 02381

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 1 2

VALVE, 1", SPM, GEN 2, N.O., 1" NPTF BLOCK PORTS, 1/4"

NPTF PILOT PORT

ASolidWorks

DRAWN BY

APPROVAL

ENGINEER


DATE

A

B

DATECHECKED BY

DATE

ERN NUMBER DATE

1234

DWG NO

A

01/29/20

2911102381

SEE PARTS ON INDIV BOM

TREATMENT:

MATERIAL:

PROCEDURE NUMBER:

CONDITION:



ANGLES: .5


SURFACE TEXTURE:2)


3)


6)

63

ENGINEERING

4/13/20

4/13/20

4/13/20

4/13/20

4-13-20

4-13-20

SECTION A-A

1/4" NPTFPILOT

FUNCTION1" NPTF

1" NPTFSUPPLY

1" NPTF VENT(SHOWN ROTATED 90 OUT OF POSITION

FOR ILLUSTRATION PURPOSES)

1

2

6

(3/8" HEX)

1

BILL OF MATERIALSITEM NO PART NUMBER DESCRIPTION MATERIAL QTY RK SK


NPTF PILOT PORTREFER TO INDV PARTS 1 X X

2 27395-1 BLOCK, VALVE, SPM, N.O., 1" NPTF, 6000 PSI A276 TP 316 1

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 2 2

ASolidWorks

A

B

1234

DWG NO

A

29111

ENGINEERING

2.81

AA

29122VER (AX VERSION #)

(SERIAL NUMBER)PATENT PENDING



2

SEE SHEET 2

MARK WITH LOGO ANDCOMPANY INFORMATION 2

2X 2.62FLATS

9.04

(2X .25SPANNER)

1/4" SAEPILOT

NOTES:

2 MARKING: MARK AS SHOWN USING LASER ETCH OR COMPUTER CONTROLLED DOT PEEN MARKING MACHINE, .06 HIGH MIN CHARACTERS.



TORQUE TO 25 FT-LBS.6

7 TORQUE TO 300 FT-LBS IN BLOCK USING SPECIALTOOL ATL 10111.


9

ALL MANUFACTURED ITEMS ARE PASSIVATED.8

1 MARK COMPONENT WITH ASSEMBLY W.O. NUMBER AS SHOULD ONCOMPONENT DRAWING


PRESSURE DATA

FLOW DATA


SUPPLY MAWP: PILOT MAWP:

5,000 PSI 5,000 PSI


Cv = 8MAXIMUM FLOW CAPACITY: 175 GPM


FUNCTION SUPPLY

VENT

PILOT

SCHEMATICN.C.

SCHEMATICN.O.

VENT

PILOT

SUPPLYFUNCTION

PATENT PENDING

9

8

REVISIONS


A ERN 02381

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 1 2

VALVE, CARTRIDGE, SPM, GEN 2, 1", N.O. OR N.C., 5,000 PSI SUPPLY,

1/4" SAE PILOT PORT

ASolidWorks

DRAWN BYAPPROVAL

ENGINEER


DATE

A

B

DATECHECKED BY

DATE

ERN NUMBER DATE

1234

DWG NO

A

04/08/20

2912202381

REFER TO INDV PARTS

TREATMENT:

MATERIAL:

PROCEDURE NUMBER:

CONDITION:



ANGLES: .5


SURFACE TEXTURE:2)


3)


6)

63

ENGINEERING

4/13/20

4/13/20

4/13/20

4/13/20

4-13-20

4-13-20

SECTION A-A

5 18 9 18 13 14 13 17 12 17 15 19 15611

1

72

10 21 103

8

16 20 16

4

6

7 (3/8" HEX)

1.00 MAX

1.00 MAX

1.00MAX

2.5022.500

2.7522.750

2.6262.624

3.00

2.88

1.25

5.21 4.71

1.09

.063 1.09

3.04

4X 30Á 30Á

CAVITY DETAIL

3" - 5 .94 MIN29 STUB ACME-2G

323232

.002 A

.002 A

.002 B

AB

1

1

8BILL OF MATERIALS

ITEM NO

PART NUMBER DESCRIPTION MATERIAL QTY RK SK

1 209249 SPRING HOUSING A274 TP S21800(NITRONIC 60) 1

2 193598 SPACER A276 TP S21800(NITRONIC 60) 1

3 193599 SEAL SLEEVE A276 TP S21800(NITRONIC 60) 1 X

4 193600 SEAT, TOP DELRIN 511P 1 X X

5 193601 SEAT, BOTTOM DELRIN 511P 1 X X

6 193602 PISTON ROD, SHOULDERED A276 S20910(NITRONIC 50) 1

7 193603 BUSHING ASTM B169 C61400(ALUMINUM BRONZE) 1

8 21112-005 HEX LOCK NUT, NYLON F594 ALLOY GR 2, NYLON (316 SS) 1 X X

9 18100-101K1 O-RING HNBR 1 X X


11 27187 SPRING COMPRESSION A313 TP 316 1

12 18100-114K1 O-RING HNBR 1 X X


14 18100-111K1 O-RING HNBR 1 X X


16 193606 BACKUP RING PEEK 2 X X



19 18108-014 T-SEAL, PISTON CARBOXYLATED NITRILE / NYLATRON 1 X X

20 18108-509 T-SEAL, ROD CARBOXYLATED NITRILE / NYLATRON 1 X X

21 207538 T-SEAL, SLEEVE CARBOXYLATED NITRILE / NYLATRON 1 X X

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 2 2

ASolidWorks

A

B

1234

DWG NO

A

29122

ENGINEERING

2.63

7.38

2X .16

2.83 4.50

AA

BB

2

SEE SHEET 2

V11" NPTF

V21" NPTF

1SEE SHEET 2

10.58

6.00

.50

6.00

.50 9.00

10.32

MOUNTING HOLES4X 5/8-11 UNC 1.00

1


(DATE OF MFG)5,000 PSI

PATENT PENDING

(SERIAL NUMBER-SAME S/N AS CARTRIDGE )

VER (AX VERSION #)29123

BLOCK

NOP2

SCHEMATICF2 V2V1 SF1

NCP1

USE SUB ASSEMBLY SEAL KIT.

USE SUB ASSEMBLY REPAIR KIT.MUST BE STAMPED PRIOR TO ASSEMBLY.4

3 TORQUE SPM INTO BLOCK WITH ATL 10111 AT 300 FT-LB.

TEST PROCEDURE: 500872

MARKING: MARK AS SHOWN USING LASER ETCH ORCOMPUTER CONTROLLED DOT PEEN MARKING MACHINE,.06 HIGH MIN CHARACTERS.

1

NOTES:

5

6

MARKING: MARK COMPONENT WITH ASSEMBLY W.O.AS SHOWN ON THE COMPONENT DRAWING

X, IN COLUMN DEPICTS PARTS IN REPAIR KIT 29110 RK.9.8. X, IN COLUMN DEPICTS PARTS IN SEAL KIT 29110 SK.

FOR BOTTOM SEAL REMOVAL USE TOOL ATL 10010-002.7.

ASSEMBLY PROCEDURE: 50282SERVICE MANUAL: 51026


1" NPTF1/4" NPTF

VENT:PILOT:

PRESSURE DATA

PORTS

FLOW DATA


SUPPLY MAWP:

SUPPLY: 1" NPTF



Cv = 8



FUNCTION 1: 1" NPTF1" NPTFFUNCTION 2:

PLUG: 1" SAE

REVISIONS


A ERN 02381

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:4 1 3

SPM, MVA, GEN 2, 4-WAY, 1", 1/4" NPTF PILOT, 1" NPTF BLOCK PORTS

ASolidWorks

DRAWN BYAPPROVAL

ENGINEER


DATE

A

B

DATECHECKED BY

DATE

ERN NUMBER DATE

1234

DWG NO

A

04/08/20

2912302381

REFER TO INDIV BOM ITEMS

TREATMENT:

MATERIAL:

PROCEDURE NUMBER:

CONDITION:



ANGLES: .5


SURFACE TEXTURE:2)


3)


6)

63

ENGINEERING

4-20-20

4-20-20

4/20/20

4/20/20

4/20/20

4/20/20

2.63

5.00

7.38

3.00

VIEW A-A

F11" NPTF

S1" NPTF

F21" NPTF

1

CC

VIEW B-B

P11/4" NPTF

P21/4" NPTF

1

SEE SHEET 3

(2X 3/8-16 UNC X 1-1/4" LG FOR LIFTING EYES)

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF1:2 2 3

ASolidWorks

A

B

1234

DWG NO

A

29123

ENGINEERING

SECTION C-C

2

1

3

3

2

65

651

BILL OF MATERIALSITEM NO PART NUMBER DESCRIPTION MATERIAL Default

/QTY RK SK

1 148062 BLOCK, 4-WAY, DUAL 1" SPM A276 TP 316 (316 SS) 1


NPTF PILOT PORTREFER TO INDV PARTS 2 X

3 18603-016 PLUG, HEX, HOLLOW, 1" SAE A240 TP 316 2

4 3 2 1

B

SIZE

BSCALE SHEET

REV

OF2:3 3 3

ASolidWorks

A

B

1234

DWG NO

A

29123

ENGINEERING

Documents

1” GEN 2 SPM Cartridge & Valve Product Line · 1” SPM, allowing simple drop-in replacement to existing installations. As a result of the new Gilmore 1” GEN 2 SPM product line,